Merge tag 'gpmc-omap-fixes-for-v4.7' of https://github.com/rogerq/linux into fixes

OMAP-GPMC: Fixes for for v4.7-rc cycle:

- Fix omap gpmc EXTRADELAY timing. The DT provided timings
were wrongly used causing devices requiring extra delay timing
to fail.

* tag 'gpmc-omap-fixes-for-v4.7' of https://github.com/rogerq/linux:
  memory: omap-gpmc: Fix omap gpmc EXTRADELAY timing
  + Linux 4.7-rc3

Signed-off-by: Olof Johansson <olof@lixom.net>

diff --git a/MAINTAINERS b/MAINTAINERS
index 16700e4..dff697c 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1159,6 +1159,7 @@ F:        arch/arm/mach-footbridge/
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
 M:     Shawn Guo <shawnguo@kernel.org>
 M:     Sascha Hauer <kernel@pengutronix.de>
+R:     Fabio Estevam <fabio.estevam@nxp.com>
 L:     linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:     Maintained
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 06b6c2d..414b427 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -741,6 +741,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
        sun7i-a20-olimex-som-evb.dtb \
        sun7i-a20-olinuxino-lime.dtb \
        sun7i-a20-olinuxino-lime2.dtb \
+       sun7i-a20-olinuxino-lime2-emmc.dtb \
        sun7i-a20-olinuxino-micro.dtb \
        sun7i-a20-orangepi.dtb \
        sun7i-a20-orangepi-mini.dtb \

diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index d82dd6e..5687d6b 100644 (file)
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -418,7 +418,7 @@
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&i2c0_pins>;
-       clock-frequency = <400000>;
+       clock-frequency = <100000>;
 
        tps@24 {
                compatible = "ti,tps65218";

diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index b01a594..0e63b9d 100644 (file)
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -60,10 +60,26 @@
 
                tps659038_pmic {
                        compatible = "ti,tps659038-pmic";
+
+                       smps12-in-supply = <&vmain>;
+                       smps3-in-supply = <&vmain>;
+                       smps45-in-supply = <&vmain>;
+                       smps6-in-supply = <&vmain>;
+                       smps7-in-supply = <&vmain>;
+                       smps8-in-supply = <&vmain>;
+                       smps9-in-supply = <&vmain>;
+                       ldo1-in-supply = <&vmain>;
+                       ldo2-in-supply = <&vmain>;
+                       ldo3-in-supply = <&vmain>;
+                       ldo4-in-supply = <&vmain>;
+                       ldo9-in-supply = <&vmain>;
+                       ldoln-in-supply = <&vmain>;
+                       ldousb-in-supply = <&vmain>;
+                       ldortc-in-supply = <&vmain>;
+
                        regulators {
                                smps12_reg: smps12 {
                                        /* VDD_MPU */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "smps12";
                                        regulator-min-microvolt = <850000>;
                                        regulator-max-microvolt = <1250000>;
@@ -73,7 +89,6 @@
 
                                smps3_reg: smps3 {
                                        /* VDD_DDR EMIF1 EMIF2 */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "smps3";
                                        regulator-min-microvolt = <1350000>;
                                        regulator-max-microvolt = <1350000>;
@@ -84,7 +99,6 @@
                                smps45_reg: smps45 {
                                        /* VDD_DSPEVE on AM572 */
                                        /* VDD_IVA + VDD_DSP on AM571 */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "smps45";
                                        regulator-min-microvolt = <850000>;
                                        regulator-max-microvolt = <1250000>;
@@ -94,7 +108,6 @@
 
                                smps6_reg: smps6 {
                                        /* VDD_GPU */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "smps6";
                                        regulator-min-microvolt = <850000>;
                                        regulator-max-microvolt = <1250000>;
@@ -104,7 +117,6 @@
 
                                smps7_reg: smps7 {
                                        /* VDD_CORE */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "smps7";
                                        regulator-min-microvolt = <850000>;
                                        regulator-max-microvolt = <1150000>;
@@ -115,13 +127,11 @@
                                smps8_reg: smps8 {
                                        /* 5728 - VDD_IVAHD */
                                        /* 5718 - N.C. test point */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "smps8";
                                };
 
                                smps9_reg: smps9 {
                                        /* VDD_3_3D */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "smps9";
                                        regulator-min-microvolt = <3300000>;
                                        regulator-max-microvolt = <3300000>;
@@ -132,7 +142,6 @@
                                ldo1_reg: ldo1 {
                                        /* VDDSHV8 - VSDMMC  */
                                        /* NOTE: on rev 1.3a, data supply */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "ldo1";
                                        regulator-min-microvolt = <1800000>;
                                        regulator-max-microvolt = <3300000>;
@@ -142,7 +151,6 @@
 
                                ldo2_reg: ldo2 {
                                        /* VDDSH18V */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "ldo2";
                                        regulator-min-microvolt = <1800000>;
                                        regulator-max-microvolt = <1800000>;
@@ -152,7 +160,6 @@
 
                                ldo3_reg: ldo3 {
                                        /* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "ldo3";
                                        regulator-min-microvolt = <1800000>;
                                        regulator-max-microvolt = <1800000>;
@@ -162,7 +169,6 @@
 
                                ldo4_reg: ldo4 {
                                        /* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
-                                       vin-supply = <&vmain>;
                                        regulator-name = "ldo4";
                                        regulator-min-microvolt = <1800000>;
                                        regulator-max-microvolt = <1800000>;
@@ -174,7 +180,6 @@
 
                                ldo9_reg: ldo9 {
                                        /* VDD_RTC  */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "ldo9";
                                        regulator-min-microvolt = <840000>;
                                        regulator-max-microvolt = <1160000>;
@@ -184,7 +189,6 @@
 
                                ldoln_reg: ldoln {
                                        /* VDDA_1V8_PLL */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "ldoln";
                                        regulator-min-microvolt = <1800000>;
                                        regulator-max-microvolt = <1800000>;
@@ -194,7 +198,6 @@
 
                                ldousb_reg: ldousb {
                                        /* VDDA_3V_USB: VDDA_USBHS33 */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "ldousb";
                                        regulator-min-microvolt = <3300000>;
                                        regulator-max-microvolt = <3300000>;
@@ -204,7 +207,6 @@
 
                                ldortc_reg: ldortc {
                                        /* VDDA_RTC  */
-                                       vin-supply = <&vmain>;
                                        regulator-name = "ldortc";
                                        regulator-min-microvolt = <1800000>;
                                        regulator-max-microvolt = <1800000>;

diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
index cbc17b0..4128fa9 100644 (file)
--- a/arch/arm/boot/dts/dm8148-evm.dts
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -93,6 +93,10 @@
        };
 };
 
+&mmc1 {
+        status = "disabled";
+};
+
 &mmc2 {
        pinctrl-names = "default";
        pinctrl-0 = <&sd1_pins>;
@@ -101,6 +105,10 @@
        cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 };
 
+&mmc3 {
+        status = "disabled";
+};
+
 &pincntl {
        sd1_pins: pinmux_sd1_pins {
                pinctrl-single,pins = <

diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
index 5d4313f..3f18486 100644 (file)
--- a/arch/arm/boot/dts/dm8148-t410.dts
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -45,6 +45,14 @@
        phy-mode = "rgmii";
 };
 
+&mmc1 {
+       status = "disabled";
+};
+
+&mmc2 {
+       status = "disabled";
+};
+
 &mmc3 {
        pinctrl-names = "default";
        pinctrl-0 = <&sd2_pins>;
@@ -53,6 +61,7 @@
        dmas = <&edma_xbar 8 0 1        /* use SDTXEVT1 instead of MCASP0TX */
                &edma_xbar 9 0 2>;      /* use SDRXEVT1 instead of MCASP0RX */
        dma-names = "tx", "rx";
+       non-removable;
 };
 
 &pincntl {

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index e007401..3a8f397 100644 (file)
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1451,6 +1451,8 @@
                        ti,hwmods = "gpmc";
                        reg = <0x50000000 0x37c>;      /* device IO registers */
                        interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+                       dmas = <&edma_xbar 4 0>;
+                       dma-names = "rxtx";
                        gpmc,num-cs = <8>;
                        gpmc,num-waitpins = <2>;
                        #address-cells = <2>;

diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 4220eef..5e06020 100644 (file)
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -107,8 +107,8 @@
        reg = <0x58000000 0x80>,
              <0x58004054 0x4>,
              <0x58004300 0x20>,
-             <0x58005054 0x4>,
-             <0x58005300 0x20>;
+             <0x58009054 0x4>,
+             <0x58009300 0x20>;
        reg-names = "dss", "pll1_clkctrl", "pll1",
                    "pll2_clkctrl", "pll2";
 

diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index ddfe1f5..fa14f77 100644 (file)
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -242,7 +242,7 @@
        hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
 
        ports {
-               port0 {
+               port {
                        dp_out: endpoint {
                                remote-endpoint = <&bridge_in>;
                        };
@@ -485,13 +485,20 @@
                edid-emulation = <5>;
 
                ports {
-                       port0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
                                bridge_out: endpoint {
                                        remote-endpoint = <&panel_in>;
                                };
                        };
 
-                       port1 {
+                       port@1 {
+                               reg = <1>;
+
                                bridge_in: endpoint {
                                        remote-endpoint = <&dp_out>;
                                };

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index f9d2e4f..1de972d 100644 (file)
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -163,7 +163,7 @@
        hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 
        ports {
-               port0 {
+               port {
                        dp_out: endpoint {
                                remote-endpoint = <&bridge_in>;
                        };
@@ -631,13 +631,20 @@
                use-external-pwm;
 
                ports {
-                       port0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+
                                bridge_out: endpoint {
                                        remote-endpoint = <&panel_in>;
                                };
                        };
 
-                       port1 {
+                       port@1 {
+                               reg = <1>;
+
                                bridge_in: endpoint {
                                        remote-endpoint = <&dp_out>;
                                };

diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 76056ba..ed44982 100644 (file)
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -85,7 +85,7 @@
                        OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
                        OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
                        OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
-                       OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
+                       OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
                        OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
                        OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
                >;

diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 41f5d38..f4f2ce4 100644 (file)
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -188,6 +188,7 @@
        vmmc-supply = <&vmmc1>;
        vmmc_aux-supply = <&vsim>;
        bus-width = <4>;
+       cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
 };
 
 &mmc3 {

diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
index d6f839c..b697106 100644 (file)
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -194,6 +194,12 @@
                        OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
                >;
        };
+
+       mmc1_wp_pins: pinmux_mmc1_cd_pins {
+               pinctrl-single,pins = <
+                       OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4)   /* etk_d15.gpio_29 */
+               >;
+       };
 };
 
 &i2c3 {
@@ -250,3 +256,8 @@
                };
        };
 };
+
+&mmc1 {
+       pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
+       wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */
+};

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index d9e2d9c..2b74a81 100644 (file)
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -288,7 +288,7 @@
                pinctrl-single,pins = <
                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)               /* ssi1_flag_tx */
-                       OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+                       OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)                /* ssi1_wake_tx (cawake) */
                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)               /* ssi1_dat_tx */
                        OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)                /* ssi1_dat_rx */
                        OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)                /* ssi1_flag_rx */
@@ -300,7 +300,7 @@
        modem_pins: pinmux_modem {
                pinctrl-single,pins = <
                        OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4)               /* gpio 70 => cmt_apeslpx */
-                       OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
+                       OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4)                /* gpio 72 => ape_rst_rq */
                        OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4)               /* gpio 73 => cmt_rst_rq */
                        OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4)               /* gpio 74 => cmt_en */
                        OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4)               /* gpio 75 => cmt_rst */

diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index a00ca76..927b17f 100644 (file)
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -97,7 +97,7 @@
                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1)            /* ssi1_dat_tx */
                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1)            /* ssi1_flag_tx */
                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1)      /* ssi1_rdy_tx */
-                       OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+                       OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)        /* ssi1_wake_tx (cawake) */
                        OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1)             /* ssi1_dat_rx */
                        OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1)             /* ssi1_flag_rx */
                        OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1)            /* ssi1_rdy_rx */
@@ -110,7 +110,7 @@
                        OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7)            /* ssi1_dat_tx */
                        OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7)            /* ssi1_flag_tx */
                        OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7)    /* ssi1_rdy_tx */
-                       OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+                       OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4)        /* ssi1_wake_tx (cawake) */
                        OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7)             /* ssi1_dat_rx */
                        OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7)             /* ssi1_flag_rx */
                        OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4)            /* ssi1_rdy_rx */
@@ -120,7 +120,7 @@
 
        modem_pins1: pinmux_modem_core1_pins {
                pinctrl-single,pins = <
-                       OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
+                       OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4)        /* gpio_34 (ape_rst_rq) */
                        OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4)            /* gpio_88 (cmt_rst_rq) */
                        OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4)            /* gpio_93 (cmt_apeslpx) */
                >;

diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts
index f19170b..c29b41d 100644 (file)
--- a/arch/arm/boot/dts/omap3-zoom3.dts
+++ b/arch/arm/boot/dts/omap3-zoom3.dts
@@ -98,7 +98,7 @@
                pinctrl-single,pins = <
                         OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)        /* uart2_cts.uart2_cts */
                         OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0)              /* uart2_rts.uart2_rts */
-                        OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+                        OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)               /* uart2_rx.uart2_rx */
                         OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)              /* uart2_tx.uart2_tx */
                >;
        };
@@ -107,7 +107,7 @@
                pinctrl-single,pins = <
                         OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0)      /* uart3_cts_rctx.uart3_cts_rctx */
                         OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0)              /* uart3_rts_sd.uart3_rts_sd */
-                        OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+                        OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0)               /* uart3_rx_irrx.uart3_rx_irrx */
                         OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)              /* uart3_tx_irtx.uart3_tx_irtx */
                >;
        };
@@ -125,7 +125,7 @@
                pinctrl-single,pins = <
                        OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2)      /* etk_clk.sdmmc3_clk */
                        OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2)      /* etk_d4.sdmmc3_dat0 */
-                       OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
+                       OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2)      /* etk_d5.sdmmc3_dat1 */
                        OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2)      /* etk_d6.sdmmc3_dat2 */
                        OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2)      /* etk_d3.sdmmc3_dat3 */
                >;

diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi
index dc759a3..5d5b620 100644 (file)
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@@ -14,6 +14,29 @@
                display0 = &hdmi0;
        };
 
+       vmain: fixedregulator-vmain {
+               compatible = "regulator-fixed";
+               regulator-name = "vmain";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+
+       vsys_cobra: fixedregulator-vsys_cobra {
+               compatible = "regulator-fixed";
+               regulator-name = "vsys_cobra";
+               vin-supply = <&vmain>;
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+
+       vdds_1v8_main: fixedregulator-vdds_1v8_main {
+               compatible = "regulator-fixed";
+               regulator-name = "vdds_1v8_main";
+               vin-supply = <&smps7_reg>;
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+       };
+
        vmmcsd_fixed: fixedregulator-mmcsd {
                compatible = "regulator-fixed";
                regulator-name = "vmmcsd_fixed";
@@ -309,7 +332,7 @@
 
        wlcore_irq_pin: pinmux_wlcore_irq_pin {
                pinctrl-single,pins = <
-                       OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6)     /* llia_wakereqin.gpio1_wk14 */
+                       OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
                >;
        };
 };
@@ -409,6 +432,26 @@
 
                        ti,ldo6-vibrator;
 
+                       smps123-in-supply = <&vsys_cobra>;
+                       smps45-in-supply = <&vsys_cobra>;
+                       smps6-in-supply = <&vsys_cobra>;
+                       smps7-in-supply = <&vsys_cobra>;
+                       smps8-in-supply = <&vsys_cobra>;
+                       smps9-in-supply = <&vsys_cobra>;
+                       smps10_out2-in-supply = <&vsys_cobra>;
+                       smps10_out1-in-supply = <&vsys_cobra>;
+                       ldo1-in-supply = <&vsys_cobra>;
+                       ldo2-in-supply = <&vsys_cobra>;
+                       ldo3-in-supply = <&vdds_1v8_main>;
+                       ldo4-in-supply = <&vdds_1v8_main>;
+                       ldo5-in-supply = <&vsys_cobra>;
+                       ldo6-in-supply = <&vdds_1v8_main>;
+                       ldo7-in-supply = <&vsys_cobra>;
+                       ldo8-in-supply = <&vsys_cobra>;
+                       ldo9-in-supply = <&vmmcsd_fixed>;
+                       ldoln-in-supply = <&vsys_cobra>;
+                       ldousb-in-supply = <&vsys_cobra>;
+
                        regulators {
                                smps123_reg: smps123 {
                                        /* VDD_OPP_MPU */
@@ -600,7 +643,8 @@
                pinctrl-0 = <&twl6040_pins>;
 
                interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
-               ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
+
+               /* audpwron gpio defined in the board specific dts */
 
                vio-supply = <&smps7_reg>;
                v2v1-supply = <&smps9_reg>;

diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts
index 46ecb1d..f75ce02 100644 (file)
--- a/arch/arm/boot/dts/omap5-igep0050.dts
+++ b/arch/arm/boot/dts/omap5-igep0050.dts
@@ -35,6 +35,22 @@
        };
 };
 
+/* LDO4 is VPP1 - ball AD9 */
+&ldo4_reg {
+       regulator-min-microvolt = <2000000>;
+       regulator-max-microvolt = <2000000>;
+};
+
+/*
+ * LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33,
+ * VDDA_HDMI - ball AN25
+ */
+&ldo7_reg {
+       status = "okay";
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+};
+
 &omap5_pmx_core {
        i2c4_pins: pinmux_i2c4_pins {
                pinctrl-single,pins = <
@@ -52,3 +68,13 @@
                <&gpio7 3 0>;           /* 195, SDA */
 };
 
+&twl6040 {
+       ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>;  /* gpio line 144 */
+};
+
+&twl6040_pins {
+       pinctrl-single,pins = <
+               OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6)      /* mcspi1_somi.gpio5_144 */
+               OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6)      /* perslimbus2_clock.gpio5_145 */
+       >;
+};

diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 60b3fbb..a51e605 100644 (file)
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -51,3 +51,13 @@
                <&gpio9 1 GPIO_ACTIVE_HIGH>,    /* TCA6424A P00, LS OE */
                <&gpio7 1 GPIO_ACTIVE_HIGH>;    /* GPIO 193, HPD */
 };
+
+&twl6040 {
+       ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;  /* gpio line 141 */
+};
+
+&twl6040_pins {
+       pinctrl-single,pins = <
+               OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6)      /* mcspi1_somi.gpio5_141 */
+       >;
+};

diff --git a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
index a3601e4..b844473 100644 (file)
--- a/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5_vining_fpga.dts
@@ -136,6 +136,7 @@
 &gmac1 {
        status = "okay";
        phy-mode = "rgmii";
+       phy-handle = <&phy1>;
 
        snps,reset-gpio = <&porta 0 GPIO_ACTIVE_LOW>;
        snps,reset-active-low;

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index ad8ba10..d294e82 100644 (file)
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -24,18 +24,21 @@
                        compatible = "shared-dma-pool";
                        reg = <0x40000000 0x01000000>;
                        no-map;
+                       status = "disabled";
                };
 
                gp1_reserved: rproc@41000000 {
                        compatible = "shared-dma-pool";
                        reg = <0x41000000 0x01000000>;
                        no-map;
+                       status = "disabled";
                };
 
                audio_reserved: rproc@42000000 {
                        compatible = "shared-dma-pool";
                        reg = <0x42000000 0x01000000>;
                        no-map;
+                       status = "disabled";
                };
 
                dmu_reserved: rproc@43000000 {

diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
index 68b479b..73c133f 100644 (file)
--- a/arch/arm/boot/dts/sun6i-a31s-primo81.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts
@@ -176,8 +176,6 @@
 };
 
 &reg_dc1sw {
-       regulator-min-microvolt = <3000000>;
-       regulator-max-microvolt = <3000000>;
        regulator-name = "vcc-lcd";
 };
 

diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
index 360adfb..d6ad619 100644 (file)
--- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts
@@ -135,8 +135,6 @@
 
 &reg_dc1sw {
        regulator-name = "vcc-lcd-usb2";
-       regulator-min-microvolt = <3000000>;
-       regulator-max-microvolt = <3000000>;
 };
 
 &reg_dc5ldo {

diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 10f49ab..47195e8 100644 (file)
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -82,6 +82,7 @@ CONFIG_TOUCHSCREEN_MMS114=y
 CONFIG_INPUT_MISC=y
 CONFIG_INPUT_MAX77693_HAPTIC=y
 CONFIG_INPUT_MAX8997_HAPTIC=y
+CONFIG_KEYBOARD_SAMSUNG=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_SAMSUNG=y
 CONFIG_SERIAL_SAMSUNG_CONSOLE=y

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 8f85756..8a5fff1 100644 (file)
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -264,6 +264,7 @@ CONFIG_KEYBOARD_TEGRA=y
 CONFIG_KEYBOARD_SPEAR=y
 CONFIG_KEYBOARD_ST_KEYSCAN=y
 CONFIG_KEYBOARD_CROS_EC=m
+CONFIG_KEYBOARD_SAMSUNG=m
 CONFIG_MOUSE_PS2_ELANTECH=y
 CONFIG_MOUSE_CYAPA=m
 CONFIG_MOUSE_ELAN_I2C=y

diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index df90bc5..8615216 100644 (file)
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -486,7 +486,7 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
 
 static void smp_cross_call(const struct cpumask *target, unsigned int ipinr)
 {
-       trace_ipi_raise(target, ipi_types[ipinr]);
+       trace_ipi_raise_rcuidle(target, ipi_types[ipinr]);
        __smp_cross_call(target, ipinr);
 }
 

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index e65aa7d..20dcf6e 100644 (file)
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -61,7 +61,6 @@ config ARCH_EXYNOS4
        select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210
        select CPU_EXYNOS4210
        select GIC_NON_BANKED
-       select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
        select MIGHT_HAVE_CACHE_L2X0
        help
          Samsung EXYNOS4 (Cortex-A9) SoC based systems

diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index a38b16b..b56de4b 100644 (file)
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -46,7 +46,7 @@ static int ksz8081_phy_fixup(struct phy_device *dev)
 static void __init imx6ul_enet_phy_init(void)
 {
        if (IS_BUILTIN(CONFIG_PHYLIB))
-               phy_register_fixup_for_uid(PHY_ID_KSZ8081, 0xffffffff,
+               phy_register_fixup_for_uid(PHY_ID_KSZ8081, MICREL_PHY_ID_MASK,
                                           ksz8081_phy_fixup);
 }
 

diff --git a/arch/arm/mach-omap1/ams-delta-fiq-handler.S b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
index 5d7fb59..bf60844 100644 (file)
--- a/arch/arm/mach-omap1/ams-delta-fiq-handler.S
+++ b/arch/arm/mach-omap1/ams-delta-fiq-handler.S
@@ -43,8 +43,8 @@
 #define OTHERS_MASK                    (MODEM_IRQ_MASK | HOOK_SWITCH_MASK)
 
 /* IRQ handler register bitmasks */
-#define DEFERRED_FIQ_MASK              (0x1 << (INT_DEFERRED_FIQ % IH2_BASE))
-#define GPIO_BANK1_MASK                (0x1 << INT_GPIO_BANK1)
+#define DEFERRED_FIQ_MASK              OMAP_IRQ_BIT(INT_DEFERRED_FIQ)
+#define GPIO_BANK1_MASK                OMAP_IRQ_BIT(INT_GPIO_BANK1)
 
 /* Driver buffer byte offsets */
 #define BUF_MASK                       (FIQ_MASK * 4)
@@ -110,7 +110,7 @@ ENTRY(qwerty_fiqin_start)
        mov r8, #2                              @ reset FIQ agreement
        str r8, [r12, #IRQ_CONTROL_REG_OFFSET]
 
-       cmp r10, #INT_GPIO_BANK1                @ is it GPIO bank interrupt?
+       cmp r10, #(INT_GPIO_BANK1 - NR_IRQS_LEGACY)     @ is it GPIO interrupt?
        beq gpio                                @ yes - process it
 
        mov r8, #1

diff --git a/arch/arm/mach-omap1/ams-delta-fiq.c b/arch/arm/mach-omap1/ams-delta-fiq.c
index d1f1209..ec760ae 100644 (file)
--- a/arch/arm/mach-omap1/ams-delta-fiq.c
+++ b/arch/arm/mach-omap1/ams-delta-fiq.c
@@ -109,7 +109,8 @@ void __init ams_delta_init_fiq(void)
         * Since no set_type() method is provided by OMAP irq chip,
         * switch to edge triggered interrupt type manually.
         */
-       offset = IRQ_ILR0_REG_OFFSET + INT_DEFERRED_FIQ * 0x4;
+       offset = IRQ_ILR0_REG_OFFSET +
+                       ((INT_DEFERRED_FIQ - NR_IRQS_LEGACY) & 0x1f) * 0x4;
        val = omap_readl(DEFERRED_FIQ_IH_BASE + offset) & ~(1 << 1);
        omap_writel(val, DEFERRED_FIQ_IH_BASE + offset);
 
@@ -149,7 +150,7 @@ void __init ams_delta_init_fiq(void)
        /*
         * Redirect GPIO interrupts to FIQ
         */
-       offset = IRQ_ILR0_REG_OFFSET + INT_GPIO_BANK1 * 0x4;
+       offset = IRQ_ILR0_REG_OFFSET + (INT_GPIO_BANK1 - NR_IRQS_LEGACY) * 0x4;
        val = omap_readl(OMAP_IH1_BASE + offset) | 1;
        omap_writel(val, OMAP_IH1_BASE + offset);
 }

diff --git a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
index adb5e76..6dfc3e1 100644 (file)
--- a/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
+++ b/arch/arm/mach-omap1/include/mach/ams-delta-fiq.h
@@ -14,6 +14,8 @@
 #ifndef __AMS_DELTA_FIQ_H
 #define __AMS_DELTA_FIQ_H
 
+#include <mach/irqs.h>
+
 /*
  * Interrupt number used for passing control from FIQ to IRQ.
  * IRQ12, described as reserved, has been selected.

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 0517f0c..1a648e9 100644 (file)
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -17,6 +17,7 @@ config ARCH_OMAP3
        select PM_OPP if PM
        select PM if CPU_IDLE
        select SOC_HAS_OMAP2_SDRC
+       select ARM_ERRATA_430973
 
 config ARCH_OMAP4
        bool "TI OMAP4"
@@ -36,6 +37,7 @@ config ARCH_OMAP4
        select PM if CPU_IDLE
        select ARM_ERRATA_754322
        select ARM_ERRATA_775420
+       select OMAP_INTERCONNECT
 
 config SOC_OMAP5
        bool "TI OMAP5"
@@ -67,6 +69,8 @@ config SOC_AM43XX
        select HAVE_ARM_SCU
        select GENERIC_CLOCKEVENTS_BROADCAST
        select HAVE_ARM_TWD
+       select ARM_ERRATA_754322
+       select ARM_ERRATA_775420
 
 config SOC_DRA7XX
        bool "TI DRA7XX"
@@ -240,4 +244,12 @@ endmenu
 
 endif
 
+config OMAP5_ERRATA_801819
+       bool "Errata 801819: An eviction from L1 data cache might stall indefinitely"
+       depends on SOC_OMAP5 || SOC_DRA7XX
+       help
+         A livelock can occur in the L2 cache arbitration that might prevent
+         a snoop from completing. Under certain conditions this can cause the
+         system to deadlock.
+
 endmenu

diff --git a/arch/arm/mach-omap2/omap-secure.h b/arch/arm/mach-omap2/omap-secure.h
index af2851f..bae263f 100644 (file)
--- a/arch/arm/mach-omap2/omap-secure.h
+++ b/arch/arm/mach-omap2/omap-secure.h
@@ -46,6 +46,7 @@
 
 #define OMAP5_DRA7_MON_SET_CNTFRQ_INDEX        0x109
 #define OMAP5_MON_AMBA_IF_INDEX                0x108
+#define OMAP5_DRA7_MON_SET_ACR_INDEX   0x107
 
 /* Secure PPA(Primary Protected Application) APIs */
 #define OMAP4_PPA_L2_POR_INDEX         0x23

diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index c625cc1..8cd1de9 100644 (file)
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -50,6 +50,39 @@ void __iomem *omap4_get_scu_base(void)
        return scu_base;
 }
 
+#ifdef CONFIG_OMAP5_ERRATA_801819
+void omap5_erratum_workaround_801819(void)
+{
+       u32 acr, revidr;
+       u32 acr_mask;
+
+       /* REVIDR[3] indicates erratum fix available on silicon */
+       asm volatile ("mrc p15, 0, %0, c0, c0, 6" : "=r" (revidr));
+       if (revidr & (0x1 << 3))
+               return;
+
+       asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+       /*
+        * BIT(27) - Disables streaming. All write-allocate lines allocate in
+        * the L1 or L2 cache.
+        * BIT(25) - Disables streaming. All write-allocate lines allocate in
+        * the L1 cache.
+        */
+       acr_mask = (0x3 << 25) | (0x3 << 27);
+       /* do we already have it done.. if yes, skip expensive smc */
+       if ((acr & acr_mask) == acr_mask)
+               return;
+
+       acr |= acr_mask;
+       omap_smc1(OMAP5_DRA7_MON_SET_ACR_INDEX, acr);
+
+       pr_debug("%s: ARM erratum workaround 801819 applied on CPU%d\n",
+                __func__, smp_processor_id());
+}
+#else
+static inline void omap5_erratum_workaround_801819(void) { }
+#endif
+
 static void omap4_secondary_init(unsigned int cpu)
 {
        /*
@@ -64,12 +97,15 @@ static void omap4_secondary_init(unsigned int cpu)
                omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX,
                                                        4, 0, 0, 0, 0, 0);
 
-       /*
-        * Configure the CNTFRQ register for the secondary cpu's which
-        * indicates the frequency of the cpu local timers.
-        */
-       if (soc_is_omap54xx() || soc_is_dra7xx())
+       if (soc_is_omap54xx() || soc_is_dra7xx()) {
+               /*
+                * Configure the CNTFRQ register for the secondary cpu's which
+                * indicates the frequency of the cpu local timers.
+                */
                set_cntfreq();
+               /* Configure ACR to disable streaming WA for 801819 */
+               omap5_erratum_workaround_801819();
+       }
 
        /*
         * Synchronise with the boot thread.
@@ -218,6 +254,8 @@ static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
 
        if (cpu_is_omap446x())
                startup_addr = omap4460_secondary_startup;
+       if (soc_is_dra74x() || soc_is_omap54xx())
+               omap5_erratum_workaround_801819();
 
        /*
         * Write the address of secondary startup routine into the

diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index 78af6d8..daf2753 100644 (file)
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -186,8 +186,9 @@ static int _pwrdm_state_switch(struct powerdomain *pwrdm, int flag)
                        trace_state = (PWRDM_TRACE_STATES_FLAG |
                                       ((next & OMAP_POWERSTATE_MASK) << 8) |
                                       ((prev & OMAP_POWERSTATE_MASK) << 0));
-                       trace_power_domain_target(pwrdm->name, trace_state,
-                                                 smp_processor_id());
+                       trace_power_domain_target_rcuidle(pwrdm->name,
+                                                         trace_state,
+                                                         smp_processor_id());
                }
                break;
        default:
@@ -523,8 +524,8 @@ int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
 
        if (arch_pwrdm && arch_pwrdm->pwrdm_set_next_pwrst) {
                /* Trace the pwrdm desired target state */
-               trace_power_domain_target(pwrdm->name, pwrst,
-                                         smp_processor_id());
+               trace_power_domain_target_rcuidle(pwrdm->name, pwrst,
+                                                 smp_processor_id());
                /* Program the pwrdm desired target state */
                ret = arch_pwrdm->pwrdm_set_next_pwrst(pwrdm, pwrst);
        }

diff --git a/arch/arm/mach-omap2/powerdomains7xx_data.c b/arch/arm/mach-omap2/powerdomains7xx_data.c
index 0ec2d00..eb350a6 100644 (file)
--- a/arch/arm/mach-omap2/powerdomains7xx_data.c
+++ b/arch/arm/mach-omap2/powerdomains7xx_data.c
@@ -36,14 +36,7 @@ static struct powerdomain iva_7xx_pwrdm = {
        .prcm_offs        = DRA7XX_PRM_IVA_INST,
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
-       .pwrsts_logic_ret = PWRSTS_OFF,
        .banks            = 4,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* hwa_mem */
-               [1] = PWRSTS_OFF_RET,   /* sl2_mem */
-               [2] = PWRSTS_OFF_RET,   /* tcm1_mem */
-               [3] = PWRSTS_OFF_RET,   /* tcm2_mem */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* hwa_mem */
                [1] = PWRSTS_ON,        /* sl2_mem */
@@ -76,12 +69,7 @@ static struct powerdomain ipu_7xx_pwrdm = {
        .prcm_offs        = DRA7XX_PRM_IPU_INST,
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
-       .pwrsts_logic_ret = PWRSTS_OFF,
        .banks            = 2,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* aessmem */
-               [1] = PWRSTS_OFF_RET,   /* periphmem */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* aessmem */
                [1] = PWRSTS_ON,        /* periphmem */
@@ -95,11 +83,7 @@ static struct powerdomain dss_7xx_pwrdm = {
        .prcm_offs        = DRA7XX_PRM_DSS_INST,
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
-       .pwrsts_logic_ret = PWRSTS_OFF,
        .banks            = 1,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* dss_mem */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* dss_mem */
        },
@@ -111,13 +95,8 @@ static struct powerdomain l4per_7xx_pwrdm = {
        .name             = "l4per_pwrdm",
        .prcm_offs        = DRA7XX_PRM_L4PER_INST,
        .prcm_partition   = DRA7XX_PRM_PARTITION,
-       .pwrsts           = PWRSTS_RET_ON,
-       .pwrsts_logic_ret = PWRSTS_RET,
+       .pwrsts           = PWRSTS_ON,
        .banks            = 2,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* nonretained_bank */
-               [1] = PWRSTS_OFF_RET,   /* retained_bank */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* nonretained_bank */
                [1] = PWRSTS_ON,        /* retained_bank */
@@ -132,9 +111,6 @@ static struct powerdomain gpu_7xx_pwrdm = {
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
        .banks            = 1,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* gpu_mem */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* gpu_mem */
        },
@@ -148,8 +124,6 @@ static struct powerdomain wkupaon_7xx_pwrdm = {
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_ON,
        .banks            = 1,
-       .pwrsts_mem_ret = {
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* wkup_bank */
        },
@@ -161,15 +135,7 @@ static struct powerdomain core_7xx_pwrdm = {
        .prcm_offs        = DRA7XX_PRM_CORE_INST,
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_ON,
-       .pwrsts_logic_ret = PWRSTS_RET,
        .banks            = 5,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* core_nret_bank */
-               [1] = PWRSTS_OFF_RET,   /* core_ocmram */
-               [2] = PWRSTS_OFF_RET,   /* core_other_bank */
-               [3] = PWRSTS_OFF_RET,   /* ipu_l2ram */
-               [4] = PWRSTS_OFF_RET,   /* ipu_unicache */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* core_nret_bank */
                [1] = PWRSTS_ON,        /* core_ocmram */
@@ -226,11 +192,7 @@ static struct powerdomain vpe_7xx_pwrdm = {
        .prcm_offs        = DRA7XX_PRM_VPE_INST,
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
-       .pwrsts_logic_ret = PWRSTS_OFF,
        .banks            = 1,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* vpe_bank */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* vpe_bank */
        },
@@ -260,14 +222,8 @@ static struct powerdomain l3init_7xx_pwrdm = {
        .name             = "l3init_pwrdm",
        .prcm_offs        = DRA7XX_PRM_L3INIT_INST,
        .prcm_partition   = DRA7XX_PRM_PARTITION,
-       .pwrsts           = PWRSTS_RET_ON,
-       .pwrsts_logic_ret = PWRSTS_RET,
+       .pwrsts           = PWRSTS_ON,
        .banks            = 3,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* gmac_bank */
-               [1] = PWRSTS_OFF_RET,   /* l3init_bank1 */
-               [2] = PWRSTS_OFF_RET,   /* l3init_bank2 */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* gmac_bank */
                [1] = PWRSTS_ON,        /* l3init_bank1 */
@@ -283,9 +239,6 @@ static struct powerdomain eve3_7xx_pwrdm = {
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
        .banks            = 1,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* eve3_bank */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* eve3_bank */
        },
@@ -299,9 +252,6 @@ static struct powerdomain emu_7xx_pwrdm = {
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
        .banks            = 1,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* emu_bank */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* emu_bank */
        },
@@ -314,11 +264,6 @@ static struct powerdomain dsp2_7xx_pwrdm = {
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
        .banks            = 3,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* dsp2_edma */
-               [1] = PWRSTS_OFF_RET,   /* dsp2_l1 */
-               [2] = PWRSTS_OFF_RET,   /* dsp2_l2 */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* dsp2_edma */
                [1] = PWRSTS_ON,        /* dsp2_l1 */
@@ -334,11 +279,6 @@ static struct powerdomain dsp1_7xx_pwrdm = {
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
        .banks            = 3,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* dsp1_edma */
-               [1] = PWRSTS_OFF_RET,   /* dsp1_l1 */
-               [2] = PWRSTS_OFF_RET,   /* dsp1_l2 */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* dsp1_edma */
                [1] = PWRSTS_ON,        /* dsp1_l1 */
@@ -354,9 +294,6 @@ static struct powerdomain cam_7xx_pwrdm = {
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
        .banks            = 1,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* vip_bank */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* vip_bank */
        },
@@ -370,9 +307,6 @@ static struct powerdomain eve4_7xx_pwrdm = {
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
        .banks            = 1,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* eve4_bank */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* eve4_bank */
        },
@@ -386,9 +320,6 @@ static struct powerdomain eve2_7xx_pwrdm = {
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
        .banks            = 1,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* eve2_bank */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* eve2_bank */
        },
@@ -402,9 +333,6 @@ static struct powerdomain eve1_7xx_pwrdm = {
        .prcm_partition   = DRA7XX_PRM_PARTITION,
        .pwrsts           = PWRSTS_OFF_ON,
        .banks            = 1,
-       .pwrsts_mem_ret = {
-               [0] = PWRSTS_OFF_RET,   /* eve1_bank */
-       },
        .pwrsts_mem_on  = {
                [0] = PWRSTS_ON,        /* eve1_bank */
        },

diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 5b385bb..cb9497a 100644 (file)
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -496,8 +496,7 @@ void __init omap_init_time(void)
        __omap_sync32k_timer_init(1, "timer_32k_ck", "ti,timer-alwon",
                        2, "timer_sys_ck", NULL, false);
 
-       if (of_have_populated_dt())
-               clocksource_probe();
+       clocksource_probe();
 }
 
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM43XX)
@@ -505,6 +504,8 @@ void __init omap3_secure_sync32k_timer_init(void)
 {
        __omap_sync32k_timer_init(12, "secure_32k_fck", "ti,timer-secure",
                        2, "timer_sys_ck", NULL, false);
+
+       clocksource_probe();
 }
 #endif /* CONFIG_ARCH_OMAP3 */
 
@@ -513,6 +514,8 @@ void __init omap3_gptimer_timer_init(void)
 {
        __omap_sync32k_timer_init(2, "timer_sys_ck", NULL,
                        1, "timer_sys_ck", "ti,timer-alwon", true);
+
+       clocksource_probe();
 }
 #endif
 

diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 84baa16..e93aa67 100644 (file)
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -68,7 +68,7 @@
 #include <linux/platform_data/asoc-s3c.h>
 #include <linux/platform_data/spi-s3c64xx.h>
 
-static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
+#define samsung_device_dma_mask (*((u64[]) { DMA_BIT_MASK(32) }))
 
 /* AC97 */
 #ifdef CONFIG_CPU_S3C2440

diff --git a/arch/arm64/boot/dts/lg/lg1312.dtsi b/arch/arm64/boot/dts/lg/lg1312.dtsi
index 3a4e9a2..fbafa24 100644 (file)
--- a/arch/arm64/boot/dts/lg/lg1312.dtsi
+++ b/arch/arm64/boot/dts/lg/lg1312.dtsi
@@ -125,7 +125,7 @@
                #size-cells = <1>;
                #interrupts-cells = <3>;
 
-               compatible = "arm,amba-bus";
+               compatible = "simple-bus";
                interrupt-parent = <&gic>;
                ranges;
 

diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index 46f325a..d7f8e06 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -163,7 +163,7 @@
        };
 
        amba {
-               compatible = "arm,amba-bus";
+               compatible = "simple-bus";
                #address-cells = <2>;
                #size-cells = <2>;
                ranges;