ARM: dts: s3c2416: Use macros for pinctrl configuration

Usage of DTS macros instead of hard-coded numbers makes code easier
to read.  One does not have to remember which value means pull-up/down
or specific driver strength.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
index 527e319..6274359 100644 (file)
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
@@ -8,6 +8,8 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/pinctrl/samsung.h>
+
 &pinctrl_0 {
        /*
         * Pin banks
@@ -83,91 +85,91 @@
 
        uart0_data: uart0-data {
                samsung,pins = "gph-0", "gph-1";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        uart0_fctl: uart0-fctl {
                samsung,pins = "gph-8", "gph-9";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        uart1_data: uart1-data {
                samsung,pins = "gph-2", "gph-3";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        uart1_fctl: uart1-fctl {
                samsung,pins = "gph-10", "gph-11";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        uart2_data: uart2-data {
                samsung,pins = "gph-4", "gph-5";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        uart2_fctl: uart2-fctl {
                samsung,pins = "gph-6", "gph-7";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        uart3_data: uart3-data {
                samsung,pins = "gph-6", "gph-7";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        extuart_clk: extuart-clk {
                samsung,pins = "gph-12";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        i2c0_bus: i2c0-bus {
                samsung,pins = "gpe-14", "gpe-15";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        spi0_bus: spi0-bus {
                samsung,pins = "gpe-11", "gpe-12", "gpe-13";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        sd0_clk: sd0-clk {
                samsung,pins = "gpe-5";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        sd0_cmd: sd0-cmd {
                samsung,pins = "gpe-6";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        sd0_bus1: sd0-bus1 {
                samsung,pins = "gpe-7";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        sd0_bus4: sd0-bus4 {
                samsung,pins = "gpe-8", "gpe-9", "gpe-10";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        sd1_cmd: sd1-cmd {
                samsung,pins = "gpl-8";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        sd1_clk: sd1-clk {
                samsung,pins = "gpl-9";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        sd1_bus1: sd1-bus1 {
                samsung,pins = "gpl-0";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 
        sd1_bus4: sd1-bus4 {
                samsung,pins = "gpl-1", "gpl-2", "gpl-3";
-               samsung,pin-function = <2>;
+               samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
        };
 };