clk: divider: fix calculation of initial best divider when rounding to closest

Similar to the reasoning for the previous commit

	DIV_ROUND_CLOSEST(parent_rate, rate)

might not be the best integer divisor to get a good approximation for
rate from parent_rate (given the metric for CLK_DIVIDER_ROUND_CLOSEST).

For example assume a parent rate of 1000 Hz and a target rate of 700.
Using DIV_ROUND_CLOSEST the suggested divisor gets calculated to 1
resulting in a target rate of 1000 with a delta of 300 to the desired
rate. With choosing 2 as divisor however the resulting rate is 500 which
is nearer to 700.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Michael Turquette <mturquette@linaro.org>

diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 78b2e65..25006a8 100644 (file)
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -219,17 +219,18 @@ static int _div_round_closest(const struct clk_div_table *table,
                              unsigned long parent_rate, unsigned long rate,
                              unsigned long flags)
 {
-       int up, down, div;
+       int up, down;
        unsigned long up_rate, down_rate;
 
-       up = down = div = DIV_ROUND_CLOSEST(parent_rate, rate);
+       up = DIV_ROUND_UP(parent_rate, rate);
+       down = parent_rate / rate;
 
        if (flags & CLK_DIVIDER_POWER_OF_TWO) {
-               up = __roundup_pow_of_two(div);
-               down = __rounddown_pow_of_two(div);
+               up = __roundup_pow_of_two(up);
+               down = __rounddown_pow_of_two(down);
        } else if (table) {
-               up = _round_up_table(table, div);
-               down = _round_down_table(table, div);
+               up = _round_up_table(table, up);
+               down = _round_down_table(table, down);
        }
 
        up_rate = DIV_ROUND_UP(parent_rate, up);