ARM: shmobile: armadillo800eva reference: Remove DTS

The r8a7740 Armadillo800EVA DTS can now be used both for
DT Multiplatform and the legacy case. Because of that
remove the r8a7740 Armadillo800EVA DT reference DTS file.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e389b40..2bff594 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -361,7 +361,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
        r8a7740-armadillo800eva.dtb \
        r8a7778-bockw.dtb \
        r8a7778-bockw-reference.dtb \
-       r8a7740-armadillo800eva-reference.dtb \
        r8a7779-marzen.dtb \
        r8a7791-koelsch.dtb \
        r8a7790-lager.dtb \

diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
deleted file mode 100644 (file)
index 5e646e6..0000000
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Reference Device Tree Source for the armadillo 800 eva board
- *
- * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/dts-v1/;
-#include "r8a7740.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-       model = "armadillo 800 eva reference";
-       compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
-
-       aliases {
-               serial1 = &scifa1;
-       };
-
-       chosen {
-               bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
-       };
-
-       memory {
-               device_type = "memory";
-               reg = <0x40000000 0x20000000>;
-       };
-
-       reg_3p3v: regulator@0 {
-               compatible = "regulator-fixed";
-               regulator-name = "fixed-3.3V";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               regulator-always-on;
-               regulator-boot-on;
-       };
-
-       vcc_sdhi0: regulator@1 {
-               compatible = "regulator-fixed";
-
-               regulator-name = "SDHI0 Vcc";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-
-               gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
-               enable-active-high;
-       };
-
-       vccq_sdhi0: regulator@2 {
-               compatible = "regulator-gpio";
-
-               regulator-name = "SDHI0 VccQ";
-               regulator-min-microvolt = <1800000>;
-               regulator-max-microvolt = <3300000>;
-               vin-supply = <&vcc_sdhi0>;
-
-               enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
-               gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
-               states = <3300000 0
-                         1800000 1>;
-
-               enable-active-high;
-       };
-
-       reg_5p0v: regulator@3 {
-               compatible = "regulator-fixed";
-               regulator-name = "fixed-5.0V";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               regulator-always-on;
-               regulator-boot-on;
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-
-               power-key {
-                       gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_POWER>;
-                       label = "SW3";
-                       gpio-key,wakeup;
-               };
-
-               back-key {
-                       gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_BACK>;
-                       label = "SW4";
-               };
-
-               menu-key {
-                       gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_MENU>;
-                       label = "SW5";
-               };
-
-               home-key {
-                       gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_HOME>;
-                       label = "SW6";
-               };
-       };
-
-       leds {
-               compatible = "gpio-leds";
-               led3 {
-                       gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
-                       label = "LED3";
-               };
-               led4 {
-                       gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
-                       label = "LED4";
-               };
-               led5 {
-                       gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
-                       label = "LED5";
-               };
-               led6 {
-                       gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
-                       label = "LED6";
-               };
-       };
-
-       i2c2: i2c@2 {
-               #address-cells = <1>;
-               #size-cells = <0>;
-               compatible = "i2c-gpio";
-               gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
-                        &pfc 91 GPIO_ACTIVE_HIGH /* scl */
-                       >;
-               i2c-gpio,delay-us = <5>;
-       };
-
-       backlight {
-               compatible = "pwm-backlight";
-               pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
-               brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
-               default-brightness-level = <9>;
-               pinctrl-0 = <&backlight_pins>;
-               pinctrl-names = "default";
-               power-supply = <&reg_5p0v>;
-               enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
-       };
-
-       sound {
-               compatible = "simple-audio-card";
-
-               simple-audio-card,format = "i2s";
-
-               simple-audio-card,cpu {
-                       sound-dai = <&sh_fsi2 0>;
-                       bitclock-inversion;
-               };
-
-               simple-audio-card,codec {
-                       sound-dai = <&wm8978>;
-                       bitclock-master;
-                       frame-master;
-                       system-clock-frequency = <12288000>;
-               };
-       };
-};
-
-&ether {
-       pinctrl-0 = <&ether_pins>;
-       pinctrl-names = "default";
-
-       phy-handle = <&phy0>;
-       status = "ok";
-
-       phy0: ethernet-phy@0 {
-               reg = <0>;
-       };
-};
-
-&extal1_clk {
-       clock-frequency = <25000000>;
-};
-&extal2_clk {
-       clock-frequency = <48000000>;
-};
-&fsibck_clk {
-       clock-frequency = <12288000>;
-};
-&cpg_clocks {
-       renesas,mode = <0x05>; /* MD_CK0 | MD_CK2 */
-};
-
-&cmt1 {
-       status = "ok";
-};
-
-&i2c0 {
-       status = "okay";
-       touchscreen@55 {
-               compatible = "sitronix,st1232";
-               reg = <0x55>;
-               interrupt-parent = <&irqpin1>;
-               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-               pinctrl-0 = <&st1232_pins>;
-               pinctrl-names = "default";
-               gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
-       };
-
-       wm8978: wm8978@1a {
-               #sound-dai-cells = <0>;
-               compatible = "wlf,wm8978";
-               reg = <0x1a>;
-       };
-};
-
-&i2c2 {
-       status = "okay";
-       rtc@30 {
-               compatible = "sii,s35390a";
-               reg = <0x30>;
-       };
-};
-
-&pfc {
-       ether_pins: ether {
-               renesas,groups = "gether_mii", "gether_int";
-               renesas,function = "gether";
-       };
-
-       scifa1_pins: serial1 {
-               renesas,groups = "scifa1_data";
-               renesas,function = "scifa1";
-       };
-
-       st1232_pins: touchscreen {
-               renesas,groups = "intc_irq10";
-               renesas,function = "intc";
-       };
-
-       backlight_pins: backlight {
-               renesas,groups = "tpu0_to2_1";
-               renesas,function = "tpu0";
-       };
-
-       mmc0_pins: mmc0 {
-               renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
-               renesas,function = "mmc0";
-       };
-
-       sdhi0_pins: sd0 {
-               renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
-               renesas,function = "sdhi0";
-       };
-
-       fsia_pins: sounda {
-               renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
-                                "fsia_data_in_1", "fsia_data_out_0";
-               renesas,function = "fsia";
-       };
-};
-
-&tpu {
-       status = "okay";
-};
-
-&mmcif0 {
-       pinctrl-0 = <&mmc0_pins>;
-       pinctrl-names = "default";
-
-       vmmc-supply = <&reg_3p3v>;
-       bus-width = <8>;
-       non-removable;
-       status = "okay";
-};
-
-&scifa1 {
-       pinctrl-0 = <&scifa1_pins>;
-       pinctrl-names = "default";
-
-       status = "okay";
-};
-
-&sdhi0 {
-       pinctrl-0 = <&sdhi0_pins>;
-       pinctrl-names = "default";
-
-       vmmc-supply = <&vcc_sdhi0>;
-       vqmmc-supply = <&vccq_sdhi0>;
-       bus-width = <4>;
-       cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
-       status = "okay";
-};
-
-&sh_fsi2 {
-       pinctrl-0 = <&fsia_pins>;
-       pinctrl-names = "default";
-
-       status = "okay";
-};