spi: dw: revisit FIFO size detection again

The commit d297933cc7fc (spi: dw: Fix detecting FIFO depth) tries to fix the
logic of the FIFO detection based on the description on the comments. However,
there is a slight difference between numbers in TX Level and TX FIFO size.

So, by specification the FIFO size would be in a range 2-256 bytes. From TX
Level prospective it means we can set threshold in the range 0-(FIFO size - 1)
bytes. Hence there are currently two issues:
  a) FIFO size 2 bytes is actually skipped since TX Level is 1 bit and could be
     either 0 or 1 byte;
  b) FIFO size is incorrectly decreased by 1 which already done by meaning of
     TX Level register.

This patch fixes it eventually right.

Fixes: d297933cc7fc (spi: dw: Fix detecting FIFO depth)
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 5a97a62..4847afb 100644 (file)
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -621,14 +621,14 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws)
        if (!dws->fifo_len) {
                u32 fifo;
 
-               for (fifo = 2; fifo <= 256; fifo++) {
+               for (fifo = 1; fifo < 256; fifo++) {
                        dw_writew(dws, DW_SPI_TXFLTR, fifo);
                        if (fifo != dw_readw(dws, DW_SPI_TXFLTR))
                                break;
                }
                dw_writew(dws, DW_SPI_TXFLTR, 0);
 
-               dws->fifo_len = (fifo == 2) ? 0 : fifo - 1;
+               dws->fifo_len = (fifo == 1) ? 0 : fifo;
                dev_dbg(dev, "Detected FIFO size: %u bytes\n", dws->fifo_len);
        }
 }