ARM: dts: am57xx-beagle-x15: remove extcon_usb1

USB1 controller is hardwired to be used as Host only port so
we don't need to check ID pin state and can get rid of extcon_usb1.

This also reduces USB1 controller's and so eSATA power's dependency
with EXTCON. This fixes eSATA port with multi_v7_defconfig.

Cc: Franklin S Cooper Jr. <fcooper@ti.com>
Cc: Vagrant Cascadian <vagrant@debian.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Tested-by: Franklin S Cooper Jr. <fcooper@ti.com>
[tony@atomide.com: updated to describe what it fixes]
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 0a5fc5d..4168eb9 100644 (file)
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -99,13 +99,6 @@
                #cooling-cells = <2>;
        };
 
-       extcon_usb1: extcon_usb1 {
-               compatible = "linux,extcon-usb-gpio";
-               id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
-               pinctrl-names = "default";
-               pinctrl-0 = <&extcon_usb1_pins>;
-       };
-
        hdmi0: connector {
                compatible = "hdmi-connector";
                label = "hdmi";
@@ -349,12 +342,6 @@
                >;
        };
 
-       extcon_usb1_pins: extcon_usb1_pins {
-               pinctrl-single,pins = <
-                       DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
-               >;
-       };
-
        tpd12s015_pins: pinmux_tpd12s015_pins {
                pinctrl-single,pins = <
                        DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)              /* gpio7_10 CT_CP_HPD */
@@ -706,10 +693,6 @@
        pinctrl-0 = <&usb1_pins>;
 };
 
-&omap_dwc3_1 {
-       extcon = <&extcon_usb1>;
-};
-
 &omap_dwc3_2 {
        extcon = <&extcon_usb2>;
 };