ACPI / LPSS: Provide build-in properties of the UART

The UART driver, dw8250.c, needs some details regarding the
Designware UART. For ACPI enumerated devices the values are
hard-coded, but since the driver also reads the values from
device properties, providing them with build-in properties.
This allows us to later remove the hard-coded values from
the driver.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c
index 357a0b8..5520102 100644 (file)
--- a/drivers/acpi/acpi_lpss.c
+++ b/drivers/acpi/acpi_lpss.c
@@ -75,6 +75,7 @@ struct lpss_device_desc {
        const char *clk_con_id;
        unsigned int prv_offset;
        size_t prv_size_override;
+       struct property_entry *properties;
        void (*setup)(struct lpss_private_data *pdata);
 };
 
@@ -163,11 +164,19 @@ static const struct lpss_device_desc lpt_i2c_dev_desc = {
        .prv_offset = 0x800,
 };
 
+static struct property_entry uart_properties[] = {
+       PROPERTY_ENTRY_U32("reg-io-width", 4),
+       PROPERTY_ENTRY_U32("reg-shift", 2),
+       PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
+       { },
+};
+
 static const struct lpss_device_desc lpt_uart_dev_desc = {
        .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
        .clk_con_id = "baudclk",
        .prv_offset = 0x800,
        .setup = lpss_uart_setup,
+       .properties = uart_properties,
 };
 
 static const struct lpss_device_desc lpt_sdio_dev_desc = {
@@ -189,6 +198,7 @@ static const struct lpss_device_desc byt_uart_dev_desc = {
        .clk_con_id = "baudclk",
        .prv_offset = 0x800,
        .setup = lpss_uart_setup,
+       .properties = uart_properties,
 };
 
 static const struct lpss_device_desc bsw_uart_dev_desc = {
@@ -197,6 +207,7 @@ static const struct lpss_device_desc bsw_uart_dev_desc = {
        .clk_con_id = "baudclk",
        .prv_offset = 0x800,
        .setup = lpss_uart_setup,
+       .properties = uart_properties,
 };
 
 static const struct lpss_device_desc byt_spi_dev_desc = {
@@ -440,6 +451,12 @@ static int acpi_lpss_create_device(struct acpi_device *adev,
                goto err_out;
        }
 
+       if (dev_desc->properties) {
+               ret = device_add_properties(&adev->dev, dev_desc->properties);
+               if (ret)
+                       goto err_out;
+       }
+
        adev->driver_data = pdata;
        pdev = acpi_create_platform_device(adev);
        if (!IS_ERR_OR_NULL(pdev)) {