#include <linux/ieee80211.h>
#include <linux/etherdevice.h>
#include <linux/tcp.h>
+#include <net/ip.h>
#include "iwl-trans.h"
#include "iwl-eeprom-parse.h"
tx_cmd->tx_flags = cpu_to_le32(tx_flags);
/* Total # bytes to be transmitted */
- tx_cmd->len = cpu_to_le16((u16)skb->len);
+ tx_cmd->len = cpu_to_le16((u16)skb->len +
+ (uintptr_t)info->driver_data[0]);
tx_cmd->next_frame_len = 0;
tx_cmd->life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE);
tx_cmd->sta_id = sta_id;
info->hw_queue != info->control.vif->cab_queue)))
return -1;
+ /* This holds the amsdu headers length */
+ info->driver_data[0] = (void *)(uintptr_t)0;
+
/*
* IWL_MVM_OFFCHANNEL_QUEUE is used for ROC packets that can be used
* in 2 different types of vifs, P2P & STATION. P2P uses the offchannel
return 0;
}
-static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb_gso,
+#ifdef CONFIG_INET
+static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb,
struct ieee80211_sta *sta,
struct sk_buff_head *mpdus_skb)
{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct ieee80211_hdr *hdr = (void *)skb->data;
+ unsigned int mss = skb_shinfo(skb)->gso_size;
struct sk_buff *tmp, *next;
- char cb[sizeof(skb_gso->cb)];
+ char cb[sizeof(skb->cb)];
+ unsigned int num_subframes, tcp_payload_len, subf_len;
+ bool ipv4 = (skb->protocol == htons(ETH_P_IP));
+ u16 ip_base_id = ipv4 ? ntohs(ip_hdr(skb)->id) : 0;
+ u16 amsdu_add, snap_ip_tcp, pad, i = 0;
+
+ snap_ip_tcp = 8 + skb_transport_header(skb) - skb_network_header(skb) +
+ tcp_hdrlen(skb);
+
+ if (!sta->max_amsdu_len ||
+ !ieee80211_is_data_qos(hdr->frame_control)) {
+ num_subframes = 1;
+ pad = 0;
+ goto segment;
+ }
+
+ /* TODO: for now, disable A-MSDU inside AMPDU */
+ if (info->flags & IEEE80211_TX_CTL_AMPDU) {
+ num_subframes = 1;
+ pad = 0;
+ goto segment;
+ }
+
+ /* Sub frame header + SNAP + IP header + TCP header + MSS */
+ subf_len = sizeof(struct ethhdr) + snap_ip_tcp + mss;
+ pad = (4 - subf_len) & 0x3;
+
+ /*
+ * If we have N subframes in the A-MSDU, then the A-MSDU's size is
+ * N * subf_len + (N - 1) * pad.
+ */
+ num_subframes = (sta->max_amsdu_len + pad) / (subf_len + pad);
+ if (num_subframes > 1) {
+ u8 *qc = ieee80211_get_qos_ctl((void *)skb->data);
+
+ *qc |= IEEE80211_QOS_CTL_A_MSDU_PRESENT;
+ }
+
+ tcp_payload_len = skb_tail_pointer(skb) - skb_transport_header(skb) -
+ tcp_hdrlen(skb) + skb->data_len;
+
+ /*
+ * Make sure we have enough TBs for the A-MSDU:
+ * 2 for each subframe
+ * 1 more for each fragment
+ * 1 more for the potential data in the header
+ */
+ num_subframes =
+ min_t(unsigned int, num_subframes,
+ (mvm->trans->max_skb_frags - 1 -
+ skb_shinfo(skb)->nr_frags) / 2);
+
+ /* This skb fits in one single A-MSDU */
+ if (num_subframes * mss >= tcp_payload_len) {
+ /*
+ * Compute the length of all the data added for the A-MSDU.
+ * This will be used to compute the length to write in the TX
+ * command. We have: SNAP + IP + TCP for n -1 subframes and
+ * ETH header for n subframes. Note that the original skb
+ * already had one set of SNAP / IP / TCP headers.
+ */
+ num_subframes = DIV_ROUND_UP(tcp_payload_len, mss);
+ info = IEEE80211_SKB_CB(skb);
+ amsdu_add = num_subframes * sizeof(struct ethhdr) +
+ (num_subframes - 1) * (snap_ip_tcp + pad);
+ /* This holds the amsdu headers length */
+ info->driver_data[0] = (void *)(uintptr_t)amsdu_add;
+
+ __skb_queue_tail(mpdus_skb, skb);
+ return 0;
+ }
- memcpy(cb, skb_gso->cb, sizeof(cb));
- next = skb_gso_segment(skb_gso, 0);
- if (IS_ERR(next))
+ /*
+ * Trick the segmentation function to make it
+ * create SKBs that can fit into one A-MSDU.
+ */
+segment:
+ skb_shinfo(skb)->gso_size = num_subframes * mss;
+ memcpy(cb, skb->cb, sizeof(cb));
+
+ next = skb_gso_segment(skb, NETIF_F_CSUM_MASK | NETIF_F_SG);
+ skb_shinfo(skb)->gso_size = mss;
+ if (WARN_ON_ONCE(IS_ERR(next)))
return -EINVAL;
else if (next)
- consume_skb(skb_gso);
+ consume_skb(skb);
while (next) {
tmp = next;
next = tmp->next;
+
memcpy(tmp->cb, cb, sizeof(tmp->cb));
+ /*
+ * Compute the length of all the data added for the A-MSDU.
+ * This will be used to compute the length to write in the TX
+ * command. We have: SNAP + IP + TCP for n -1 subframes and
+ * ETH header for n subframes.
+ */
+ tcp_payload_len = skb_tail_pointer(tmp) -
+ skb_transport_header(tmp) -
+ tcp_hdrlen(tmp) + tmp->data_len;
+
+ if (ipv4)
+ ip_hdr(tmp)->id = htons(ip_base_id + i * num_subframes);
+
+ if (tcp_payload_len > mss) {
+ num_subframes = DIV_ROUND_UP(tcp_payload_len, mss);
+ info = IEEE80211_SKB_CB(tmp);
+ amsdu_add = num_subframes * sizeof(struct ethhdr) +
+ (num_subframes - 1) * (snap_ip_tcp + pad);
+ info->driver_data[0] = (void *)(uintptr_t)amsdu_add;
+ skb_shinfo(tmp)->gso_size = mss;
+ } else {
+ u8 *qc = ieee80211_get_qos_ctl((void *)tmp->data);
+
+ if (ipv4)
+ ip_send_check(ip_hdr(tmp));
+ *qc &= ~IEEE80211_QOS_CTL_A_MSDU_PRESENT;
+ skb_shinfo(tmp)->gso_size = 0;
+ }
tmp->prev = NULL;
tmp->next = NULL;
__skb_queue_tail(mpdus_skb, tmp);
+ i++;
}
return 0;
}
+#else /* CONFIG_INET */
+static int iwl_mvm_tx_tso(struct iwl_mvm *mvm, struct sk_buff *skb,
+ struct ieee80211_sta *sta,
+ struct sk_buff_head *mpdus_skb)
+{
+ /* Impossible to get TSO with CONFIG_INET */
+ WARN_ON(1);
+
+ return -1;
+}
+#endif
/*
* Sets the fields in the Tx cmd that are crypto related
struct ieee80211_sta *sta)
{
struct iwl_mvm_sta *mvmsta = iwl_mvm_sta_from_mac80211(sta);
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct sk_buff_head mpdus_skbs;
unsigned int payload_len;
int ret;
if (WARN_ON_ONCE(mvmsta->sta_id == IWL_MVM_STATION_COUNT))
return -1;
+ /* This holds the amsdu headers length */
+ info->driver_data[0] = (void *)(uintptr_t)0;
+
if (!skb_is_gso(skb))
return iwl_mvm_tx_mpdu(mvm, skb, sta);
return ret;
while (!skb_queue_empty(&mpdus_skbs)) {
- struct sk_buff *skb = __skb_dequeue(&mpdus_skbs);
+ skb = __skb_dequeue(&mpdus_skbs);
ret = iwl_mvm_tx_mpdu(mvm, skb, sta);
if (ret) {
projects / cascardo / linux.git / commitdiff