fix comnment/printk typos concerning "empty"

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index e759e92..337c924 100644 (file)
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -807,7 +807,7 @@ Changes from 20040908 to 20040920
          lpfc_disc_done/lpfc_do_dpc cleanup - lpfc_disc_done can return
          void - move lpfc_do_dpc and lpfc_disc_done to lpfc_hbadisc.c -
          remove checking of list emptiness before calling lpfc_disc_done,
-         it handles the emtpy list case just fine and the additional
+         it handles the empty list case just fine and the additional
          instructions cost less then the bustlocked spinlock operations.
        * Integrated patch from Christoph Hellwig: This adds a new 64bit
          counter instead, brd_no isn't reused anymore.  Also some tiny

diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 3765ac0..68988af 100644 (file)
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -310,7 +310,7 @@ imx_dma_setup_sg(int channel,
        imxdma->resbytes = dma_length;
 
        if (!sg || !sgcount) {
-               printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
+               printk(KERN_ERR "imxdma%d: imx_dma_setup_sg empty sg list\n",
                       channel);
                return -EINVAL;
        }

diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
index f6fc4b7..5997e7c 100644 (file)
--- a/drivers/scsi/aic7xxx_old/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -615,7 +615,7 @@ ultra2_dmafifoflush:
                         * went empty and the next bit of data is copied from
                         * the SCSI fifo into the PCI fifo.  It should only
                         * come on when both FIFOs (meaning the entire FIFO
-                        * chain) are emtpy.  Since it can take up to 4 cycles
+                        * chain) are empty.  Since it can take up to 4 cycles
                         * for new data to be copied from the SCSI fifo into
                         * the PCI fifo, testing for FIFOEMP status for 4
                         * extra times gives the needed time for any

diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 3c02fa9..e65b0d9 100644 (file)
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -81,7 +81,7 @@ nwpserial_console_write(struct console *co, const char *s, unsigned int count)
 
        uart_console_write(&up->port, s, count, nwpserial_console_putchar);
 
-       /* wait for transmitter to become emtpy */
+       /* wait for transmitter to become empty */
        while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
                cpu_relax();
 

diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 4568298..3634ced 100644 (file)
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -636,7 +636,7 @@ static int hw_rule_period_time(struct snd_pcm_hw_params *params,
                min_datainterval = min(min_datainterval, fp->datainterval);
        }
        if (min_datainterval == 0xff) {
-               hwc_debug("  --> get emtpy\n");
+               hwc_debug("  --> get empty\n");
                it->empty = 1;
                return -EINVAL;
        }