ARM: dts: rockchip: add tps65910 regulator for bqcurie2

The Curie2 uses a tps659102 as its main pmic, so add the i2c1 and tps65910
node as well as define the used voltages and regulator-names according to
the schematics.

Also fix the supply of the sd0 regulator, as it is supplied by the vio reg.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 38910f6..8b479f7 100644 (file)
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -31,6 +31,7 @@
                regulator-max-microvolt = <3000000>;
                gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
                startup-delay-us = <100000>;
+               vin-supply = <&vcc_io>;
        };
 
        gpio-keys {
@@ -59,6 +60,92 @@
        };
 };
 
+&i2c1 {
+       status = "okay";
+       clock-frequency = <400000>;
+
+       tps: tps@2d {
+               reg = <0x2d>;
+
+               interrupt-parent = <&gpio6>;
+               interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+               vcc5-supply = <&vcc_io>;
+               vcc6-supply = <&vcc_io>;
+
+               regulators {
+                       vcc_rtc: regulator@0 {
+                               regulator-name = "vcc_rtc";
+                               regulator-always-on;
+                       };
+
+                       vcc_io: regulator@1 {
+                               regulator-name = "vcc_io";
+                               regulator-always-on;
+                       };
+
+                       vdd_arm: regulator@2 {
+                               regulator-name = "vdd_arm";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       vcc_ddr: regulator@3 {
+                               regulator-name = "vcc_ddr";
+                               regulator-min-microvolt = <600000>;
+                               regulator-max-microvolt = <1500000>;
+                               regulator-boot-on;
+                               regulator-always-on;
+                       };
+
+                       vcc18_cif: regulator@5 {
+                               regulator-name = "vcc18_cif";
+                               regulator-always-on;
+                       };
+
+                       vdd_11: regulator@6 {
+                               regulator-name = "vdd_11";
+                               regulator-always-on;
+                       };
+
+                       vcc_25: regulator@7 {
+                               regulator-name = "vcc_25";
+                               regulator-always-on;
+                       };
+
+                       vcc_18: regulator@8 {
+                               regulator-name = "vcc_18";
+                               regulator-always-on;
+                       };
+
+                       vcc25_hdmi: regulator@9 {
+                               regulator-name = "vcc25_hdmi";
+                               regulator-always-on;
+                       };
+
+                       vcca_33: regulator@10 {
+                               regulator-name = "vcca_33";
+                               regulator-always-on;
+                       };
+
+                       vcc_tp: regulator@11 {
+                               regulator-name = "vcc_tp";
+                               regulator-always-on;
+                       };
+
+                       vcc28_cif: regulator@12 {
+                               regulator-name = "vcc28_cif";
+                               regulator-always-on;
+                       };
+               };
+       };
+};
+
+/* must be included after &tps gets defined */
+#include "tps65910.dtsi"
+
 &mmc0 { /* sdmmc */
        num-slots = <1>;
        status = "okay";