Staging: xillybus: quoted strings split across lines

Fix checkpatch.pl issues with quoted strings split across lines in xillybus_core.c

Signed-off-by: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/xillybus/xillybus_core.c b/drivers/staging/xillybus/xillybus_core.c
index 7db6f03..e77fb28 100644 (file)
--- a/drivers/staging/xillybus/xillybus_core.c
+++ b/drivers/staging/xillybus/xillybus_core.c
@@ -112,8 +112,7 @@ static void malformed_message(u32 *buf)
        msg_bufno = (buf[0] >> 12) & 0x3ff;
        msg_data = buf[1] & 0xfffffff;
 
-       pr_warn("xillybus: Malformed message (skipping): "
-               "opcode=%d, channel=%03x, dir=%d, bufno=%03x, data=%07x\n",
+       pr_warn("xillybus: Malformed message (skipping): opcode=%d, channel=%03x, dir=%d, bufno=%03x, data=%07x\n",
                opcode, msg_channel, msg_dir, msg_bufno, msg_data);
 }
 
@@ -153,15 +152,13 @@ irqreturn_t xillybus_isr(int irq, void *data)
        for (i = 0; i < buf_size; i += 2)
                if (((buf[i+1] >> 28) & 0xf) != ep->msg_counter) {
                        malformed_message(&buf[i]);
-                       pr_warn("xillybus: Sending a NACK on "
-                               "counter %x (instead of %x) on entry %d\n",
+                       pr_warn("xillybus: Sending a NACK on counter %x (instead of %x) on entry %d\n",
                                ((buf[i+1] >> 28) & 0xf),
                                ep->msg_counter,
                                i/2);
 
                        if (++ep->failed_messages > 10)
-                               pr_err("xillybus: Lost sync with "
-                                      "interrupt messages. Stopping.\n");
+                               pr_err("xillybus: Lost sync with interrupt messages. Stopping.\n");
                        else {
                                ep->ephw->hw_sync_sgl_for_device(
                                        ep,
@@ -283,13 +280,7 @@ irqreturn_t xillybus_isr(int irq, void *data)
                case XILLYMSG_OPCODE_FATAL_ERROR:
                        ep->fatal_error = 1;
                        wake_up_interruptible(&ep->ep_wait); /* For select() */
-                       pr_err("xillybus: FPGA reported a fatal "
-                              "error. This means that the low-level "
-                              "communication with the device has failed. "
-                              "This hardware problem is most likely "
-                              "unrelated to xillybus (neither kernel "
-                              "module nor FPGA core), but reports are "
-                              "still welcome. All I/O is aborted.\n");
+                       pr_err("xillybus: FPGA reported a fatal error. This means that the low-level communication with the device has failed. This hardware problem is most likely unrelated to xillybus (neither kernel module nor FPGA core), but reports are still welcome. All I/O is aborted.\n");
                        break;
                default:
                        malformed_message(&buf[i]);
@@ -486,8 +477,7 @@ static int xilly_setupchannels(struct xilly_endpoint *ep,
 
                if ((channelnum > ep->num_channels) ||
                    ((channelnum == 0) && !is_writebuf)) {
-                       pr_err("xillybus: IDT requests channel out "
-                              "of range. Aborting.\n");
+                       pr_err("xillybus: IDT requests channel out of range. Aborting.\n");
                        return -ENODEV;
                }
 
@@ -565,9 +555,7 @@ static int xilly_setupchannels(struct xilly_endpoint *ep,
                                 */
                                if ((left_of_wr_salami < bytebufsize) &&
                                    (left_of_wr_salami > 0)) {
-                                       pr_err("xillybus: "
-                                              "Corrupt buffer allocation "
-                                              "in IDT. Aborting.\n");
+                                       pr_err("xillybus: Corrupt buffer allocation in IDT. Aborting.\n");
                                        return -ENODEV;
                                }
 
@@ -644,9 +632,7 @@ static int xilly_setupchannels(struct xilly_endpoint *ep,
                                 */
                                if ((left_of_rd_salami < bytebufsize) &&
                                    (left_of_rd_salami > 0)) {
-                                       pr_err("xillybus: "
-                                              "Corrupt buffer allocation "
-                                              "in IDT. Aborting.\n");
+                                       pr_err("xillybus: Corrupt buffer allocation in IDT. Aborting.\n");
                                        return -ENODEV;
                                }
 
@@ -706,16 +692,14 @@ static int xilly_setupchannels(struct xilly_endpoint *ep,
        }
 
        if (!msg_buf_done) {
-               pr_err("xillybus: Corrupt IDT: No message buffer. "
-                      "Aborting.\n");
+               pr_err("xillybus: Corrupt IDT: No message buffer. Aborting.\n");
                return -ENODEV;
        }
 
        return 0;
 
 memfail:
-       pr_err("xillybus: Failed to allocate write buffer memory. "
-              "Aborting.\n");
+       pr_err("xillybus: Failed to allocate write buffer memory. Aborting.\n");
        return -ENOMEM;
 dmafail:
        pr_err("xillybus: Failed to map DMA memory!. Aborting.\n");
@@ -745,8 +729,7 @@ static void xilly_scan_idt(struct xilly_endpoint *endpoint,
        scan++;
 
        if (scan > end_of_idt) {
-               pr_err("xillybus: IDT device name list overflow. "
-                      "Aborting.\n");
+               pr_err("xillybus: IDT device name list overflow. Aborting.\n");
                idt_handle->chandesc = NULL;
                return;
        } else
@@ -757,8 +740,7 @@ static void xilly_scan_idt(struct xilly_endpoint *endpoint,
        if (len & 0x03) {
                idt_handle->chandesc = NULL;
 
-               pr_err("xillybus: Corrupt IDT device name list. "
-                      "Aborting.\n");
+               pr_err("xillybus: Corrupt IDT device name list. Aborting.\n");
        }
 
        idt_handle->entries = len >> 2;
@@ -803,8 +785,7 @@ static int xilly_obtain_idt(struct xilly_endpoint *endpoint)
                DMA_FROM_DEVICE);
 
        if (channel->wr_buffers[0]->end_offset != endpoint->idtlen) {
-               pr_err("xillybus: IDT length mismatch (%d != %d). "
-                      "Aborting.\n",
+               pr_err("xillybus: IDT length mismatch (%d != %d). Aborting.\n",
                       channel->wr_buffers[0]->end_offset, endpoint->idtlen);
                rc = -ENODEV;
                return rc;
@@ -821,9 +802,7 @@ static int xilly_obtain_idt(struct xilly_endpoint *endpoint)
 
        /* Check version number. Accept anything below 0x82 for now. */
        if (*version > 0x82) {
-               pr_err("xillybus: No support for IDT version 0x%02x. "
-                      "Maybe the xillybus driver needs an upgarde. "
-                      "Aborting.\n",
+               pr_err("xillybus: No support for IDT version 0x%02x. Maybe the xillybus driver needs an upgarde. Aborting.\n",
                       (int) *version);
                rc = -ENODEV;
                return rc;
@@ -1312,9 +1291,7 @@ static int xillybus_myflush(struct xilly_channel *channel, long timeout)
                                 channel->rd_wait,
                                 (!channel->rd_full),
                                 timeout) == 0) {
-                       pr_warn("xillybus: "
-                               "Timed out while flushing. "
-                               "Output data may be lost.\n");
+                       pr_warn("xillybus: Timed out while flushing. Output data may be lost.\n");
 
                        rc = -ETIMEDOUT;
                        break;
@@ -1354,11 +1331,9 @@ static void xillybus_autoflush(struct work_struct *work)
        rc = xillybus_myflush(channel, -1);
 
        if (rc == -EINTR)
-               pr_warn("xillybus: Autoflush failed because "
-                       "work queue thread got a signal.\n");
+               pr_warn("xillybus: Autoflush failed because work queue thread got a signal.\n");
        else if (rc)
-               pr_err("xillybus: Autoflush failed under "
-                      "weird circumstances.\n");
+               pr_err("xillybus: Autoflush failed under weird circumstances.\n");
 
 }
 
@@ -1615,8 +1590,8 @@ static int xillybus_open(struct inode *inode, struct file *filp)
        mutex_unlock(&ep_list_lock);
 
        if (!endpoint) {
-               pr_err("xillybus: open() failed to find a device "
-                      "for major=%d and minor=%d\n", major, minor);
+               pr_err("xillybus: open() failed to find a device for major=%d and minor=%d\n",
+                      major, minor);
                return -ENODEV;
        }
 
@@ -1642,15 +1617,13 @@ static int xillybus_open(struct inode *inode, struct file *filp)
        if ((filp->f_mode & FMODE_READ) && (filp->f_flags & O_NONBLOCK) &&
            (channel->wr_synchronous || !channel->wr_allow_partial ||
             !channel->wr_supports_nonempty)) {
-               pr_err("xillybus: open() failed: "
-                      "O_NONBLOCK not allowed for read on this device\n");
+               pr_err("xillybus: open() failed: O_NONBLOCK not allowed for read on this device\n");
                return -ENODEV;
        }
 
        if ((filp->f_mode & FMODE_WRITE) && (filp->f_flags & O_NONBLOCK) &&
            (channel->rd_synchronous || !channel->rd_allow_partial)) {
-               pr_err("xillybus: open() failed: "
-                      "O_NONBLOCK not allowed for write on this device\n");
+               pr_err("xillybus: open() failed: O_NONBLOCK not allowed for write on this device\n");
                return -ENODEV;
        }
 
@@ -1765,8 +1738,7 @@ static int xillybus_release(struct inode *inode, struct file *filp)
                rc = mutex_lock_interruptible(&channel->rd_mutex);
 
                if (rc) {
-                       pr_warn("xillybus: Failed to close file. "
-                               "Hardware left in messy state.\n");
+                       pr_warn("xillybus: Failed to close file. Hardware left in messy state.\n");
                        return rc;
                }
 
@@ -1791,8 +1763,7 @@ static int xillybus_release(struct inode *inode, struct file *filp)
        if (filp->f_mode & FMODE_READ) {
                rc = mutex_lock_interruptible(&channel->wr_mutex);
                if (rc) {
-                       pr_warn("xillybus: Failed to close file. "
-                               "Hardware left in messy state.\n");
+                       pr_warn("xillybus: Failed to close file. Hardware left in messy state.\n");
                        return rc;
                }
 
@@ -1853,10 +1824,7 @@ static int xillybus_release(struct inode *inode, struct file *filp)
 
                                if (channel->wr_sleepy) {
                                        mutex_unlock(&channel->wr_mutex);
-                                       pr_warn("xillybus: Hardware failed to "
-                                               "respond to close command, "
-                                               "therefore left in "
-                                               "messy state.\n");
+                                       pr_warn("xillybus: Hardware failed to respond to close command, therefore left in messy state.\n");
                                        return -EINTR;
                                }
                        }
@@ -2057,8 +2025,7 @@ static int xillybus_init_chrdev(struct xilly_endpoint *endpoint,
                                       "%s", devname);
 
                if (IS_ERR(device)) {
-                       pr_warn("xillybus: Failed to create %s "
-                               "device. Aborting.\n", devname);
+                       pr_warn("xillybus: Failed to create %s device. Aborting.\n", devname);
                        goto error3;
                }
        }
@@ -2141,8 +2108,7 @@ static int xilly_quiesce(struct xilly_endpoint *endpoint)
                                         XILLY_TIMEOUT);
 
        if (endpoint->idtlen < 0) {
-               pr_err("xillybus: Failed to quiesce the device on "
-                      "exit. Quitting while leaving a mess.\n");
+               pr_err("xillybus: Failed to quiesce the device on exit. Quitting while leaving a mess.\n");
                return -ENODEV;
        }
        return 0; /* Success */