clk: max77686: Register OF clock provider
authorTomasz Figa <t.figa@samsung.com>
Thu, 12 Dec 2013 16:07:20 +0000 (17:07 +0100)
committerMike Turquette <mturquette@linaro.org>
Wed, 8 Jan 2014 17:57:07 +0000 (09:57 -0800)
If max77686 chip is instantiated from device tree, it is desirable to
have an OF clock provider to allow device tree based look-up of clocks.
This patch adds OF clock provider registration to the clk-max77686
driver.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
Documentation/devicetree/bindings/clock/maxim,max77686.txt [new file with mode: 0644]
Documentation/devicetree/bindings/mfd/max77686.txt
drivers/clk/clk-max77686.c

diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt
new file mode 100644 (file)
index 0000000..96ce71b
--- /dev/null
@@ -0,0 +1,38 @@
+Binding for Maxim MAX77686 32k clock generator block
+
+This is a part of device tree bindings of MAX77686 multi-function device.
+More information can be found in bindings/mfd/max77686.txt file.
+
+The MAX77686 contains three 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C.
+
+Following properties should be presend in main device node of the MFD chip.
+
+Required properties:
+- #clock-cells: simple one-cell clock specifier format is used, where the
+  only cell is used as an index of the clock inside the provider. Following
+  indices are allowed:
+    - 0: 32khz_ap clock,
+    - 1: 32khz_cp clock,
+    - 2: 32khz_pmic clock.
+
+Example: Node of the MFD chip
+
+       max77686: max77686@09 {
+               compatible = "maxim,max77686";
+               interrupt-parent = <&wakeup_eint>;
+               interrupts = <26 0>;
+               reg = <0x09>;
+               #clock-cells = <1>;
+
+               /* ... */
+       };
+
+Example: Clock consumer node
+
+       foo@0 {
+               compatible = "bar,foo";
+               /* ... */
+               clock-names = "my-clock";
+               clocks = <&max77686 2>;
+       };
index c6a3469..678f3cf 100644 (file)
@@ -7,6 +7,9 @@ different i2c slave address,presently for which we are statically creating i2c
 client while probing.This document describes the binding for mfd device and
 PMIC submodule.
 
+Binding for the built-in 32k clock generator block is defined separately
+in bindings/clk/maxim,max77686.txt file.
+
 Required properties:
 - compatible : Must be "maxim,max77686";
 - reg : Specifies the i2c slave address of PMIC block.
index 3cf38dc..3d7e8dd 100644 (file)
@@ -169,6 +169,26 @@ static int max77686_clk_probe(struct platform_device *pdev)
 
        platform_set_drvdata(pdev, clocks);
 
+       if (iodev->dev->of_node) {
+               struct clk_onecell_data *of_data;
+
+               of_data = devm_kzalloc(&pdev->dev,
+                                       sizeof(*of_data), GFP_KERNEL);
+               if (!of_data) {
+                       ret = -ENOMEM;
+                       goto err_clocks;
+               }
+
+               of_data->clks = clocks;
+               of_data->clk_num = MAX77686_CLKS_NUM;
+               ret = of_clk_add_provider(iodev->dev->of_node,
+                                       of_clk_src_onecell_get, of_data);
+               if (ret) {
+                       dev_err(&pdev->dev, "failed to register OF clock provider\n");
+                       goto err_clocks;
+               }
+       }
+
        return 0;
 
 err_clocks:
@@ -182,9 +202,13 @@ err_clocks:
 
 static int max77686_clk_remove(struct platform_device *pdev)
 {
+       struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
        struct clk **clocks = platform_get_drvdata(pdev);
        int i;
 
+       if (iodev->dev->of_node)
+               of_clk_del_provider(iodev->dev->of_node);
+
        for (i = 0; i < MAX77686_CLKS_NUM; i++) {
                struct clk_hw *hw = __clk_get_hw(clocks[i]);
                struct max77686_clk *max77686 = to_max77686_clk(hw);