exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
+ exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
exynos5410-smdk5410.dtb \
exynos5420-arndale-octa.dtb \
status = "disabled";
};
+ mfc: codec@13400000 {
+ compatible = "samsung,mfc-v7";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 102 0>;
+ clock-names = "mfc", "sclk_mfc";
+ clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
+ samsung,power-domain = <&pd_mfc>;
+ status = "disabled";
+ };
+
serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
pinctrl2 = &pinctrl_2;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@900 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x900>;
+ };
+
+ cpu@901 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x901>;
+ };
+ };
+
pmu_system_controller: system-controller@10020000 {
clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
"clkout4", "clkout8", "clkout9";
/ {
compatible = "samsung,exynos4212", "samsung,exynos4";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@A00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA00>;
+ };
+
+ cpu@A01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA01>;
+ };
+ };
+
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <18>;
};
/dts-v1/;
#include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Trats 2 based on Exynos4412";
aliases {
i2c9 = &i2c_ak8975;
i2c10 = &i2c_cm36651;
+ i2c11 = &i2c_max77693;
};
memory {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-mem-off;
};
ldo23_reg: ldo23 {
regulator-name = "VMEM_VDDF_3.0V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
- regulator-always-on;
- regulator-mem-off;
};
buck9_reg: buck9 {
};
};
+ i2c_max77693: i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ max77693@66 {
+ compatible = "maxim,max77693";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 2>;
+ reg = <0x66>;
+
+ regulators {
+ esafeout1_reg: ESAFEOUT1@1 {
+ regulator-name = "ESAFEOUT1";
+ };
+ esafeout2_reg: ESAFEOUT2@2 {
+ regulator-name = "ESAFEOUT2";
+ };
+ charger_reg: CHARGER@0 {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <60000>;
+ regulator-max-microamp = <2580000>;
+ };
+ };
+ };
+ };
+
mmc@12550000 {
num-slots = <1>;
broken-cd;
io-channels = <&adc 2>; /* Battery temperature */
};
};
+
+&pinctrl_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep0>;
+
+ sleep0: sleep-states {
+ PIN_SLP(gpa0-0, INPUT, NONE);
+ PIN_SLP(gpa0-1, OUT0, NONE);
+ PIN_SLP(gpa0-2, INPUT, NONE);
+ PIN_SLP(gpa0-3, INPUT, UP);
+ PIN_SLP(gpa0-4, INPUT, NONE);
+ PIN_SLP(gpa0-5, INPUT, DOWN);
+ PIN_SLP(gpa0-6, INPUT, DOWN);
+ PIN_SLP(gpa0-7, INPUT, UP);
+
+ PIN_SLP(gpa1-0, INPUT, DOWN);
+ PIN_SLP(gpa1-1, INPUT, DOWN);
+ PIN_SLP(gpa1-2, INPUT, DOWN);
+ PIN_SLP(gpa1-3, INPUT, DOWN);
+ PIN_SLP(gpa1-4, INPUT, DOWN);
+ PIN_SLP(gpa1-5, INPUT, DOWN);
+
+ PIN_SLP(gpb-0, INPUT, NONE);
+ PIN_SLP(gpb-1, INPUT, NONE);
+ PIN_SLP(gpb-2, INPUT, NONE);
+ PIN_SLP(gpb-3, INPUT, NONE);
+ PIN_SLP(gpb-4, INPUT, DOWN);
+ PIN_SLP(gpb-5, INPUT, UP);
+ PIN_SLP(gpb-6, INPUT, DOWN);
+ PIN_SLP(gpb-7, INPUT, DOWN);
+
+ PIN_SLP(gpc0-0, INPUT, DOWN);
+ PIN_SLP(gpc0-1, INPUT, DOWN);
+ PIN_SLP(gpc0-2, INPUT, DOWN);
+ PIN_SLP(gpc0-3, INPUT, DOWN);
+ PIN_SLP(gpc0-4, INPUT, DOWN);
+
+ PIN_SLP(gpc1-0, INPUT, NONE);
+ PIN_SLP(gpc1-1, PREV, NONE);
+ PIN_SLP(gpc1-2, INPUT, NONE);
+ PIN_SLP(gpc1-3, INPUT, NONE);
+ PIN_SLP(gpc1-4, INPUT, NONE);
+
+ PIN_SLP(gpd0-0, INPUT, DOWN);
+ PIN_SLP(gpd0-1, INPUT, DOWN);
+ PIN_SLP(gpd0-2, INPUT, NONE);
+ PIN_SLP(gpd0-3, INPUT, NONE);
+
+ PIN_SLP(gpd1-0, INPUT, DOWN);
+ PIN_SLP(gpd1-1, INPUT, DOWN);
+ PIN_SLP(gpd1-2, INPUT, NONE);
+ PIN_SLP(gpd1-3, INPUT, NONE);
+
+ PIN_SLP(gpf0-0, INPUT, NONE);
+ PIN_SLP(gpf0-1, INPUT, NONE);
+ PIN_SLP(gpf0-2, INPUT, DOWN);
+ PIN_SLP(gpf0-3, INPUT, DOWN);
+ PIN_SLP(gpf0-4, INPUT, NONE);
+ PIN_SLP(gpf0-5, INPUT, DOWN);
+ PIN_SLP(gpf0-6, INPUT, NONE);
+ PIN_SLP(gpf0-7, INPUT, DOWN);
+
+ PIN_SLP(gpf1-0, INPUT, DOWN);
+ PIN_SLP(gpf1-1, INPUT, DOWN);
+ PIN_SLP(gpf1-2, INPUT, DOWN);
+ PIN_SLP(gpf1-3, INPUT, DOWN);
+ PIN_SLP(gpf1-4, INPUT, NONE);
+ PIN_SLP(gpf1-5, INPUT, NONE);
+ PIN_SLP(gpf1-6, INPUT, DOWN);
+ PIN_SLP(gpf1-7, PREV, NONE);
+
+ PIN_SLP(gpf2-0, PREV, NONE);
+ PIN_SLP(gpf2-1, INPUT, DOWN);
+ PIN_SLP(gpf2-2, INPUT, DOWN);
+ PIN_SLP(gpf2-3, INPUT, DOWN);
+ PIN_SLP(gpf2-4, INPUT, DOWN);
+ PIN_SLP(gpf2-5, INPUT, DOWN);
+ PIN_SLP(gpf2-6, INPUT, NONE);
+ PIN_SLP(gpf2-7, INPUT, NONE);
+
+ PIN_SLP(gpf3-0, INPUT, NONE);
+ PIN_SLP(gpf3-1, PREV, NONE);
+ PIN_SLP(gpf3-2, PREV, NONE);
+ PIN_SLP(gpf3-3, PREV, NONE);
+ PIN_SLP(gpf3-4, OUT1, NONE);
+ PIN_SLP(gpf3-5, INPUT, DOWN);
+
+ PIN_SLP(gpj0-0, PREV, NONE);
+ PIN_SLP(gpj0-1, PREV, NONE);
+ PIN_SLP(gpj0-2, PREV, NONE);
+ PIN_SLP(gpj0-3, INPUT, DOWN);
+ PIN_SLP(gpj0-4, PREV, NONE);
+ PIN_SLP(gpj0-5, PREV, NONE);
+ PIN_SLP(gpj0-6, INPUT, DOWN);
+ PIN_SLP(gpj0-7, INPUT, DOWN);
+
+ PIN_SLP(gpj1-0, INPUT, DOWN);
+ PIN_SLP(gpj1-1, PREV, NONE);
+ PIN_SLP(gpj1-2, PREV, NONE);
+ PIN_SLP(gpj1-3, INPUT, DOWN);
+ PIN_SLP(gpj1-4, INPUT, DOWN);
+ };
+};
+
+&pinctrl_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep1>;
+
+ sleep1: sleep-states {
+ PIN_SLP(gpk0-0, PREV, NONE);
+ PIN_SLP(gpk0-1, PREV, NONE);
+ PIN_SLP(gpk0-2, OUT0, NONE);
+ PIN_SLP(gpk0-3, PREV, NONE);
+ PIN_SLP(gpk0-4, PREV, NONE);
+ PIN_SLP(gpk0-5, PREV, NONE);
+ PIN_SLP(gpk0-6, PREV, NONE);
+
+ PIN_SLP(gpk1-0, INPUT, DOWN);
+ PIN_SLP(gpk1-1, INPUT, DOWN);
+ PIN_SLP(gpk1-2, INPUT, DOWN);
+ PIN_SLP(gpk1-3, PREV, NONE);
+ PIN_SLP(gpk1-4, PREV, NONE);
+ PIN_SLP(gpk1-5, PREV, NONE);
+ PIN_SLP(gpk1-6, PREV, NONE);
+
+ PIN_SLP(gpk2-0, INPUT, DOWN);
+ PIN_SLP(gpk2-1, INPUT, DOWN);
+ PIN_SLP(gpk2-2, INPUT, DOWN);
+ PIN_SLP(gpk2-3, INPUT, DOWN);
+ PIN_SLP(gpk2-4, INPUT, DOWN);
+ PIN_SLP(gpk2-5, INPUT, DOWN);
+ PIN_SLP(gpk2-6, INPUT, DOWN);
+
+ PIN_SLP(gpk3-0, OUT0, NONE);
+ PIN_SLP(gpk3-1, INPUT, NONE);
+ PIN_SLP(gpk3-2, INPUT, DOWN);
+ PIN_SLP(gpk3-3, INPUT, NONE);
+ PIN_SLP(gpk3-4, INPUT, NONE);
+ PIN_SLP(gpk3-5, INPUT, NONE);
+ PIN_SLP(gpk3-6, INPUT, NONE);
+
+ PIN_SLP(gpl0-0, INPUT, DOWN);
+ PIN_SLP(gpl0-1, INPUT, DOWN);
+ PIN_SLP(gpl0-2, INPUT, DOWN);
+ PIN_SLP(gpl0-3, INPUT, DOWN);
+ PIN_SLP(gpl0-4, PREV, NONE);
+ PIN_SLP(gpl0-6, PREV, NONE);
+
+ PIN_SLP(gpl1-0, INPUT, DOWN);
+ PIN_SLP(gpl1-1, INPUT, DOWN);
+ PIN_SLP(gpl2-0, INPUT, DOWN);
+ PIN_SLP(gpl2-1, INPUT, DOWN);
+ PIN_SLP(gpl2-2, INPUT, DOWN);
+ PIN_SLP(gpl2-3, INPUT, DOWN);
+ PIN_SLP(gpl2-4, INPUT, DOWN);
+ PIN_SLP(gpl2-5, INPUT, DOWN);
+ PIN_SLP(gpl2-6, PREV, NONE);
+ PIN_SLP(gpl2-7, INPUT, DOWN);
+
+ PIN_SLP(gpm0-0, INPUT, DOWN);
+ PIN_SLP(gpm0-1, INPUT, DOWN);
+ PIN_SLP(gpm0-2, INPUT, DOWN);
+ PIN_SLP(gpm0-3, INPUT, DOWN);
+ PIN_SLP(gpm0-4, INPUT, DOWN);
+ PIN_SLP(gpm0-5, INPUT, DOWN);
+ PIN_SLP(gpm0-6, INPUT, DOWN);
+ PIN_SLP(gpm0-7, INPUT, DOWN);
+
+ PIN_SLP(gpm1-0, INPUT, DOWN);
+ PIN_SLP(gpm1-1, INPUT, DOWN);
+ PIN_SLP(gpm1-2, INPUT, NONE);
+ PIN_SLP(gpm1-3, INPUT, NONE);
+ PIN_SLP(gpm1-4, INPUT, NONE);
+ PIN_SLP(gpm1-5, INPUT, NONE);
+ PIN_SLP(gpm1-6, INPUT, DOWN);
+
+ PIN_SLP(gpm2-0, INPUT, NONE);
+ PIN_SLP(gpm2-1, INPUT, NONE);
+ PIN_SLP(gpm2-2, INPUT, DOWN);
+ PIN_SLP(gpm2-3, INPUT, DOWN);
+ PIN_SLP(gpm2-4, INPUT, DOWN);
+
+ PIN_SLP(gpm3-0, PREV, NONE);
+ PIN_SLP(gpm3-1, PREV, NONE);
+ PIN_SLP(gpm3-2, PREV, NONE);
+ PIN_SLP(gpm3-3, OUT1, NONE);
+ PIN_SLP(gpm3-4, INPUT, DOWN);
+ PIN_SLP(gpm3-5, INPUT, DOWN);
+ PIN_SLP(gpm3-6, INPUT, DOWN);
+ PIN_SLP(gpm3-7, INPUT, DOWN);
+
+ PIN_SLP(gpm4-0, INPUT, DOWN);
+ PIN_SLP(gpm4-1, INPUT, DOWN);
+ PIN_SLP(gpm4-2, INPUT, DOWN);
+ PIN_SLP(gpm4-3, INPUT, DOWN);
+ PIN_SLP(gpm4-4, INPUT, DOWN);
+ PIN_SLP(gpm4-5, INPUT, DOWN);
+ PIN_SLP(gpm4-6, INPUT, DOWN);
+ PIN_SLP(gpm4-7, INPUT, DOWN);
+
+ PIN_SLP(gpy0-0, INPUT, DOWN);
+ PIN_SLP(gpy0-1, INPUT, DOWN);
+ PIN_SLP(gpy0-2, INPUT, DOWN);
+ PIN_SLP(gpy0-3, INPUT, DOWN);
+ PIN_SLP(gpy0-4, INPUT, DOWN);
+ PIN_SLP(gpy0-5, INPUT, DOWN);
+
+ PIN_SLP(gpy1-0, INPUT, DOWN);
+ PIN_SLP(gpy1-1, INPUT, DOWN);
+ PIN_SLP(gpy1-2, INPUT, DOWN);
+ PIN_SLP(gpy1-3, INPUT, DOWN);
+
+ PIN_SLP(gpy2-0, PREV, NONE);
+ PIN_SLP(gpy2-1, INPUT, DOWN);
+ PIN_SLP(gpy2-2, INPUT, NONE);
+ PIN_SLP(gpy2-3, INPUT, NONE);
+ PIN_SLP(gpy2-4, INPUT, NONE);
+ PIN_SLP(gpy2-5, INPUT, NONE);
+
+ PIN_SLP(gpy3-0, INPUT, DOWN);
+ PIN_SLP(gpy3-1, INPUT, DOWN);
+ PIN_SLP(gpy3-2, INPUT, DOWN);
+ PIN_SLP(gpy3-3, INPUT, DOWN);
+ PIN_SLP(gpy3-4, INPUT, DOWN);
+ PIN_SLP(gpy3-5, INPUT, DOWN);
+ PIN_SLP(gpy3-6, INPUT, DOWN);
+ PIN_SLP(gpy3-7, INPUT, DOWN);
+
+ PIN_SLP(gpy4-0, INPUT, DOWN);
+ PIN_SLP(gpy4-1, INPUT, DOWN);
+ PIN_SLP(gpy4-2, INPUT, DOWN);
+ PIN_SLP(gpy4-3, INPUT, DOWN);
+ PIN_SLP(gpy4-4, INPUT, DOWN);
+ PIN_SLP(gpy4-5, INPUT, DOWN);
+ PIN_SLP(gpy4-6, INPUT, DOWN);
+ PIN_SLP(gpy4-7, INPUT, DOWN);
+
+ PIN_SLP(gpy5-0, INPUT, DOWN);
+ PIN_SLP(gpy5-1, INPUT, DOWN);
+ PIN_SLP(gpy5-2, INPUT, DOWN);
+ PIN_SLP(gpy5-3, INPUT, DOWN);
+ PIN_SLP(gpy5-4, INPUT, DOWN);
+ PIN_SLP(gpy5-5, INPUT, DOWN);
+ PIN_SLP(gpy5-6, INPUT, DOWN);
+ PIN_SLP(gpy5-7, INPUT, DOWN);
+
+ PIN_SLP(gpy6-0, INPUT, DOWN);
+ PIN_SLP(gpy6-1, INPUT, DOWN);
+ PIN_SLP(gpy6-2, INPUT, DOWN);
+ PIN_SLP(gpy6-3, INPUT, DOWN);
+ PIN_SLP(gpy6-4, INPUT, DOWN);
+ PIN_SLP(gpy6-5, INPUT, DOWN);
+ PIN_SLP(gpy6-6, INPUT, DOWN);
+ PIN_SLP(gpy6-7, INPUT, DOWN);
+ };
+};
+
+&pinctrl_2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep2>;
+
+ sleep2: sleep-states {
+ PIN_SLP(gpz-0, INPUT, DOWN);
+ PIN_SLP(gpz-1, INPUT, DOWN);
+ PIN_SLP(gpz-2, INPUT, DOWN);
+ PIN_SLP(gpz-3, INPUT, DOWN);
+ PIN_SLP(gpz-4, INPUT, DOWN);
+ PIN_SLP(gpz-5, INPUT, DOWN);
+ PIN_SLP(gpz-6, INPUT, DOWN);
+ };
+};
+
+&pinctrl_3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep3>;
+
+ sleep3: sleep-states {
+ PIN_SLP(gpv0-0, INPUT, DOWN);
+ PIN_SLP(gpv0-1, INPUT, DOWN);
+ PIN_SLP(gpv0-2, INPUT, DOWN);
+ PIN_SLP(gpv0-3, INPUT, DOWN);
+ PIN_SLP(gpv0-4, INPUT, DOWN);
+ PIN_SLP(gpv0-5, INPUT, DOWN);
+ PIN_SLP(gpv0-6, INPUT, DOWN);
+ PIN_SLP(gpv0-7, INPUT, DOWN);
+
+ PIN_SLP(gpv1-0, INPUT, DOWN);
+ PIN_SLP(gpv1-1, INPUT, DOWN);
+ PIN_SLP(gpv1-2, INPUT, DOWN);
+ PIN_SLP(gpv1-3, INPUT, DOWN);
+ PIN_SLP(gpv1-4, INPUT, DOWN);
+ PIN_SLP(gpv1-5, INPUT, DOWN);
+ PIN_SLP(gpv1-6, INPUT, DOWN);
+ PIN_SLP(gpv1-7, INPUT, DOWN);
+
+ PIN_SLP(gpv2-0, INPUT, DOWN);
+ PIN_SLP(gpv2-1, INPUT, DOWN);
+ PIN_SLP(gpv2-2, INPUT, DOWN);
+ PIN_SLP(gpv2-3, INPUT, DOWN);
+ PIN_SLP(gpv2-4, INPUT, DOWN);
+ PIN_SLP(gpv2-5, INPUT, DOWN);
+ PIN_SLP(gpv2-6, INPUT, DOWN);
+ PIN_SLP(gpv2-7, INPUT, DOWN);
+
+ PIN_SLP(gpv3-0, INPUT, DOWN);
+ PIN_SLP(gpv3-1, INPUT, DOWN);
+ PIN_SLP(gpv3-2, INPUT, DOWN);
+ PIN_SLP(gpv3-3, INPUT, DOWN);
+ PIN_SLP(gpv3-4, INPUT, DOWN);
+ PIN_SLP(gpv3-5, INPUT, DOWN);
+ PIN_SLP(gpv3-6, INPUT, DOWN);
+ PIN_SLP(gpv3-7, INPUT, DOWN);
+
+ PIN_SLP(gpv4-0, INPUT, DOWN);
+ };
+};
/ {
compatible = "samsung,exynos4412", "samsung,exynos4";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@A00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA00>;
+ };
+
+ cpu@A01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA01>;
+ };
+
+ cpu@A02 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA02>;
+ };
+
+ cpu@A03 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA03>;
+ };
+ };
+
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <20>;
};
* published by the Free Software Foundation.
*/
+#define PIN_PULL_NONE 0
+#define PIN_PULL_DOWN 1
+#define PIN_PULL_UP 3
+
+#define PIN_PDN_OUT0 0
+#define PIN_PDN_OUT1 1
+#define PIN_PDN_INPUT 2
+#define PIN_PDN_PREV 3
+
+#define PIN_SLP(_pin, _mode, _pull) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-con-pdn = <PIN_PDN_ ##_mode>; \
+ samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>; \
+ }
+
/ {
pinctrl@11400000 {
gpa0: gpa0 {
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
-#include "exynos5250.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
bootargs = "console=ttySAC2,115200";
};
- rtc@101E0000 {
- status = "okay";
- };
-
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- i2c@12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- samsung,i2c-slave-addr = <0x66>;
- status = "okay";
-
- s5m8767_pmic@66 {
- compatible = "samsung,s5m8767-pmic";
- reg = <0x66>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
- vinb1-supply = <&main_dc_reg>;
- vinb2-supply = <&main_dc_reg>;
- vinb3-supply = <&main_dc_reg>;
- vinb4-supply = <&main_dc_reg>;
- vinb5-supply = <&main_dc_reg>;
- vinb6-supply = <&main_dc_reg>;
- vinb7-supply = <&main_dc_reg>;
- vinb8-supply = <&main_dc_reg>;
- vinb9-supply = <&main_dc_reg>;
-
- vinl1-supply = <&buck7_reg>;
- vinl2-supply = <&buck7_reg>;
- vinl3-supply = <&buck7_reg>;
- vinl4-supply = <&main_dc_reg>;
- vinl5-supply = <&main_dc_reg>;
- vinl6-supply = <&main_dc_reg>;
- vinl7-supply = <&main_dc_reg>;
- vinl8-supply = <&buck8_reg>;
- vinl9-supply = <&buck8_reg>;
-
- s5m8767,pmic-buck2-dvs-voltage = <1300000>;
- s5m8767,pmic-buck3-dvs-voltage = <1100000>;
- s5m8767,pmic-buck4-dvs-voltage = <1200000>;
- s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
- <&gpd1 1 0>,
- <&gpd1 2 0>;
- s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
- <&gpx2 4 0>,
- <&gpx2 5 0>;
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_1.0V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_28IO_DP_1.35V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDD_COMMON1_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD_IOPERI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD_EXT_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD_MPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD_XPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD_COMMON2_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD_33ON_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD_COMMON3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_ABB2_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD_USB_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDDQ_C2C_W_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDD18_ABB0_3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDD10_COMMON4_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDD18_HSIC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "VDDQ_MMC2_3_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "VDD_33ON_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "EXT_33_OFF";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- op_mode = <1>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "EXT_28_OFF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "PVDD_LDO25";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- op_mode = <1>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "EXT_18_OFF";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- op_mode = <1>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDD_MEM_1.35V";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1355000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "PVDD_BUCK7";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "PVDD_BUCK8";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VDD_33_OFF_EXT1";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
- };
- };
- };
-
- i2c@12C80000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x50>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c@12C90000 {
- status = "okay";
-
- wm1811a@1a {
-
- compatible = "wlf,wm1811";
- reg = <0x1a>;
-
- AVDD2-supply = <&main_dc_reg>;
- CPVDD-supply = <&main_dc_reg>;
- DBVDD1-supply = <&main_dc_reg>;
- DBVDD2-supply = <&main_dc_reg>;
- DBVDD3-supply = <&main_dc_reg>;
- LDO1VDD-supply = <&main_dc_reg>;
- SPKVDD1-supply = <&main_dc_reg>;
- SPKVDD2-supply = <&main_dc_reg>;
-
- wlf,ldo1ena = <&gpb0 0 0>;
- wlf,ldo2ena = <&gpb0 1 0>;
- };
- };
-
- i2c@12CE0000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x38>;
-
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- i2c@121D0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
-
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
- };
-
- sata@122F0000 {
- status = "okay";
- };
-
- sata-phy@12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
-
- mmc_0: mmc@12200000 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
-
- mmc_2: mmc@12220000 {
- status = "okay";
- num-slots = <1>;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- bus-width = <4>;
- disable-wp;
- cap-sd-highspeed;
- };
-
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
gpio_keys {
compatible = "gpio-keys";
menu {
label = "SW-TACT2";
- gpios = <&gpx1 4 1>;
+ gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-key,wakeup;
};
home {
label = "SW-TACT3";
- gpios = <&gpx1 5 1>;
+ gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
gpio-key,wakeup;
};
up {
label = "SW-TACT4";
- gpios = <&gpx1 6 1>;
+ gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
gpio-key,wakeup;
};
down {
label = "SW-TACT5";
- gpios = <&gpx1 7 1>;
+ gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
back {
label = "SW-TACT6";
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
gpio-key,wakeup;
};
wakeup {
label = "SW-TACT7";
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-key,wakeup;
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 2>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- vdd-supply = <&ldo8_reg>;
- };
-
regulators {
compatible = "simple-bus";
#address-cells = <1>;
regulator-name = "VDD_33ON_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 1>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
enable-active-high;
};
};
};
- dp-controller@145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
- status = "okay";
+ // SMSC USB3503 connected in hardware only mode as a PHY
+ usb_hub: usb-hub {
+ compatible = "smsc,usb3503a";
+
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
};
+};
- fimd: fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 2560x1600 DP panel */
- clock-frequency = <50000>;
- hactive = <2560>;
- vactive = <1600>;
- hfront-porch = <48>;
- hback-porch = <80>;
- hsync-len = <32>;
- vback-porch = <16>;
- vfront-porch = <8>;
- vsync-len = <6>;
- };
+&dp {
+ status = "okay";
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+};
+
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing@0 {
+ /* 2560x1600 DP panel */
+ clock-frequency = <50000>;
+ hactive = <2560>;
+ vactive = <1600>;
+ hfront-porch = <48>;
+ hback-porch = <80>;
+ hsync-len = <32>;
+ vback-porch = <16>;
+ vfront-porch = <8>;
+ vsync-len = <6>;
};
};
+};
- usb_hub_bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ samsung,i2c-slave-addr = <0x66>;
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ vinb1-supply = <&main_dc_reg>;
+ vinb2-supply = <&main_dc_reg>;
+ vinb3-supply = <&main_dc_reg>;
+ vinb4-supply = <&main_dc_reg>;
+ vinb5-supply = <&main_dc_reg>;
+ vinb6-supply = <&main_dc_reg>;
+ vinb7-supply = <&main_dc_reg>;
+ vinb8-supply = <&main_dc_reg>;
+ vinb9-supply = <&main_dc_reg>;
+
+ vinl1-supply = <&buck7_reg>;
+ vinl2-supply = <&buck7_reg>;
+ vinl3-supply = <&buck7_reg>;
+ vinl4-supply = <&main_dc_reg>;
+ vinl5-supply = <&main_dc_reg>;
+ vinl6-supply = <&main_dc_reg>;
+ vinl7-supply = <&main_dc_reg>;
+ vinl8-supply = <&buck8_reg>;
+ vinl9-supply = <&buck8_reg>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
+ <&gpd1 1 GPIO_ACTIVE_HIGH>,
+ <&gpd1 2 GPIO_ACTIVE_HIGH>;
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+ <&gpx2 4 GPIO_ACTIVE_HIGH>,
+ <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
- // SMSC USB3503 connected in hardware only mode as a PHY
- usb_hub: usb_hub {
- compatible = "smsc,usb3503a";
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_28IO_DP_1.35V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_COMMON1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_IOPERI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
- reset-gpios = <&gpx3 5 1>;
- connect-gpios = <&gpd1 7 1>;
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_XPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD_COMMON2_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_33ON_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD_COMMON3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_ABB2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_COMMON4_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDQ_MMC2_3_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDD_33ON_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "EXT_33_OFF";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "EXT_28_OFF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "PVDD_LDO25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <1>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "EXT_18_OFF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1.35V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1355000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "PVDD_BUCK7";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "PVDD_BUCK8";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_33_OFF_EXT1";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
};
};
};
+
+&i2c_2 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+
+ wm1811a@1a {
+ compatible = "wlf,wm1811";
+ reg = <0x1a>;
+
+ AVDD2-supply = <&main_dc_reg>;
+ CPVDD-supply = <&main_dc_reg>;
+ DBVDD1-supply = <&main_dc_reg>;
+ DBVDD2-supply = <&main_dc_reg>;
+ DBVDD3-supply = <&main_dc_reg>;
+ LDO1VDD-supply = <&main_dc_reg>;
+ SPKVDD1-supply = <&main_dc_reg>;
+ SPKVDD2-supply = <&main_dc_reg>;
+
+ wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+ wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ sata_phy_i2c:sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
/ {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
- rtc@101E0000 {
- status = "okay";
- };
-
- i2c@12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
-
- eeprom@50 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x50>;
- };
-
- max77686@09 {
- compatible = "maxim,max77686";
- reg = <0x09>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "P1.2V_LDO_OUT2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "P2.8V_LDO_OUT4";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "P1.8V_LDO_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "P1.1V_LDO_OUT6";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "P1.1V_LDO_OUT7";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "P1.0V_LDO_OUT8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "P1.8V_LDO_OUT10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "P1.8V_LDO_OUT11";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "P3.0V_LDO_OUT12";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "P1.8V_LDO_OUT13";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "P1.8V_LDO_OUT14";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "P1.0V_LDO_OUT15";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "P1.8V_LDO_OUT16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "P1.8V_BUCK_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
- };
-
vdd: fixed-regulator@0 {
compatible = "regulator-fixed";
regulator-name = "vdd-supply";
regulator-always-on;
};
- i2c@12C70000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
+ sound {
+ compatible = "samsung,smdk-wm8994";
- eeprom@51 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x51>;
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&wm8994>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
};
- wm8994: wm8994@1a {
- compatible = "wlf,wm8994";
- reg = <0x1a>;
+ codec_mclk: codec-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16934000>;
+ };
+ };
+};
- gpio-controller;
- #gpio-cells = <2>;
+&dp {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ status = "okay";
+};
- clocks = <&codec_mclk>;
- clock-names = "MCLK1";
+&ehci {
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
- AVDD2-supply = <&vdd>;
- CPVDD-supply = <&vdd>;
- DBVDD-supply = <&dbvdd>;
- SPKVDD1-supply = <&spkvdd>;
- SPKVDD2-supply = <&spkvdd>;
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing@0 {
+ /* 1280x800 */
+ clock-frequency = <50000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hfront-porch = <4>;
+ hback-porch = <4>;
+ hsync-len = <4>;
+ vback-porch = <4>;
+ vfront-porch = <4>;
+ vsync-len = <4>;
};
};
+};
- i2c@121D0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
- status = "okay";
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+};
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+
+ eeprom@50 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x50>;
};
- i2c@12C80000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+ max77686@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.2V_LDO_OUT2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
- i2c@12CE0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
+ ldo4_reg: LDO4 {
+ regulator-name = "P2.8V_LDO_OUT4";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
- sata@122F0000 {
- status = "okay";
- };
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.8V_LDO_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- sata-phy@12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
+ ldo6_reg: LDO6 {
+ regulator-name = "P1.1V_LDO_OUT6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
- mmc@12200000 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
- mmc@12220000 {
- status = "okay";
- num-slots = <1>;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- bus-width = <4>;
- disable-wp;
- cap-sd-highspeed;
- };
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- spi_1: spi@12d30000 {
- cs-gpios = <&gpa2 5 0>;
- status = "okay";
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- w25q80bw@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25x80";
- reg = <0>;
- spi-max-frequency = <1000000>;
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
- controller-data {
- samsung,spi-feedback-delay = <0>;
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0xc0000>;
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
};
};
};
+};
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- };
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ eeprom@51 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x51>;
};
- i2s0: i2s@03830000 {
- status = "okay";
+ wm8994: wm8994@1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ clocks = <&codec_mclk>;
+ clock-names = "MCLK1";
+
+ AVDD2-supply = <&vdd>;
+ CPVDD-supply = <&vdd>;
+ DBVDD-supply = <&dbvdd>;
+ SPKVDD1-supply = <&spkvdd>;
+ SPKVDD2-supply = <&spkvdd>;
};
+};
- sound {
- compatible = "samsung,smdk-wm8994";
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
- samsung,i2s-controller = <&i2s0>;
- samsung,audio-codec = <&wm8994>;
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
};
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
- usb@12110000 {
- samsung,vbus-gpio = <&gpx2 6 0>;
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
};
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
- dp-controller@145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- status = "okay";
+ sata_phy_i2c: sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
};
+};
- fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 1280x800 */
- clock-frequency = <50000>;
- hactive = <1280>;
- vactive = <800>;
- hfront-porch = <4>;
- hback-porch = <4>;
- hsync-len = <4>;
- vback-porch = <4>;
- vfront-porch = <4>;
- vsync-len = <4>;
- };
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
+
+&spi_1 {
+ status = "okay";
+ cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+
+ w25q80bw@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
};
- };
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <24000000>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
};
- codec_mclk: codec-mclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <16934000>;
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
};
};
};
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
/ {
};
chosen {
- };
-
- rtc@101E0000 {
- status = "okay";
- };
-
- pinctrl@11400000 {
- ec_irq: ec-irq {
- samsung,pins = "gpx1-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- sd3_clk: sd3-clk {
- samsung,pin-drv = <0>;
- };
-
- sd3_cmd: sd3-cmd {
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- sd3_bus4: sd3-bus-width4 {
- samsung,pin-drv = <0>;
- };
-
- max98095_en: max98095-en {
- samsung,pins = "gpx1-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@13400000 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
+ bootargs = "console=tty1";
};
gpio-keys {
power {
label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
lid-switch {
label = "Lid";
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
i2c-parent = <&{/i2c@12CA0000}>;
- our-claim-gpio = <&gpf0 3 1>;
- their-claim-gpios = <&gpe0 4 1>;
+ our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+ their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
slew-delay-us = <10>;
wait-retry-us = <3000>;
wait-free-us = <50000>;
cros_ec: embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
- interrupts = <6 0>;
+ interrupts = <6 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
pinctrl-names = "default";
pinctrl-0 = <&ec_irq>;
};
i2c@12CD0000 {
- max98095: codec@11 {
- compatible = "maxim,max98095";
- reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
- pinctrl-names = "default";
- };
-
ptn3460: lvds-bridge@20 {
compatible = "nxp,ptn3460";
reg = <0x20>;
};
};
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
sound {
compatible = "google,snow-audio-max98095";
regulator-name = "P5.0V_USB3CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 0>;
+ gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_en>;
enable-active-high;
};
- phy@12100000 {
- vbus-supply = <&usb3_vbus_reg>;
- };
-
- usb@12110000 {
- samsung,vbus-gpio = <&gpx1 1 0>;
- };
-
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- };
-
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
pinctrl-names = "default";
};
- fimd@14400000 {
- status = "okay";
- samsung,invert-vclk;
- };
-
panel: panel {
compatible = "auo,b116xw03";
power-supply = <&fet6>;
backlight = <&backlight>;
};
+};
- dp-controller@145B0000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 0>;
- bridge = <&ptn3460>;
- };
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+ bridge = <&ptn3460>;
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
};
&i2c_0 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- max77686@09 {
+ max77686: max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
wakeup-source;
};
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+
+ max98095: codec@11 {
+ compatible = "maxim,max98095";
+ reg = <0x11>;
+ pinctrl-0 = <&max98095_en>;
+ pinctrl-names = "default";
+ };
};
&i2c_8 {
};
};
+&i2s0 {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
+ wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
cap-sd-highspeed;
};
};
&pinctrl_0 {
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ max98095_en: max98095-en {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
};
&spi_1 {
num-cs = <1>;
};
+&usbdrd_phy {
+ vbus-supply = <&usb3_vbus_reg>;
+};
+
#include "cros-ec-keyboard.dtsi"
--- /dev/null
+/*
+ * Google Spring board device tree source
+ *
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+ model = "Google Spring";
+ compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=tty1";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq>, <&lid_irq>;
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ usb-hub {
+ compatible = "smsc,usb3503a";
+ reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
+
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd_gpio>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <1>;
+ samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ s5m8767-pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+ wakeup-source;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+ <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+ <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+ <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+ <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+ /*
+ * The following arrays of DVS voltages are not used, since we are
+ * not using GPIOs to control PMIC bucks, but they must be defined
+ * to please the driver.
+ */
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap",
+ "en32khz_cp",
+ "en32khz_bt";
+ };
+
+ regulators {
+ ldo4_reg: LDO4 {
+ regulator-name = "P1.0V_LDO_OUT4";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.0V_LDO_OUT5";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_mydp";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "P2.8V_LDO_OUT17";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "vdd_bridge";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.2V_BUCK_OUT6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <0>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_ummc";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ cros_ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ };
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+/*
+ * On Spring we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_1 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
+&pinctrl_0 {
+ s5m8767_dvs: s5m8767-dvs {
+ samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ dp_hpd_gpio: dp-hpd-gpio {
+ samsung,pins = "gpc3-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_ds: s5m8767-ds {
+ samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ hsic_reset: hsic-reset {
+ samsung,pins = "gpe1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&sd1_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cd {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+};
+
+#include "cros-ec-keyboard.dtsi"
clock-names = "fimg2d";
};
- codec@11000000 {
+ mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
clock-names = "mfc";
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
clock-names = "uart", "clk_uart_baud0";
};
- sata@122F0000 {
+ sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
#phy-cells = <1>;
};
- usb@12110000 {
+ ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
};
};
- usb@12120000 {
+ ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
clock-names = "gscl";
};
- hdmi {
+ hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
#phy-cells = <0>;
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
#include "exynos5420.dtsi"
/ {
status = "okay";
clock-frequency = <400000>;
- max77802-pmic@9 {
+ max77802: max77802-pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
status = "okay";
num-slots = <1>;
broken-cd;
- caps2-mmc-hs200-1_8v;
+ mmc-hs200-1_8v;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+ clock-names = "rtc", "rtc_src";
};
&spi_2 {
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
#include "exynos5800.dtsi"
/ {
status = "okay";
clock-frequency = <400000>;
- max77802-pmic@9 {
+ max77802: max77802-pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
status = "okay";
num-slots = <1>;
broken-cd;
- caps2-mmc-hs200-1_8v;
+ mmc-hs200-1_8v;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+ clock-names = "rtc", "rtc_src";
};
&spi_2 {
status = "okay";
};
-&pwm {
- status = "okay";
-};
-
&pinctrl0 {
gpio_leds: gpio-leds {
samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
clocks = <&clocks PCLK_PWM>;
samsung,pwm-outputs = <0>, <1>;
#pwm-cells = <3>;
- status = "disabled";
};
pinctrl0: pinctrl@7f008000 {
projects / cascardo / linux.git / commitdiff