ARM: dts: sun6i: Add sun6i-reference-design-tablet.dtsi

Just like with a13/a23/a33 most a31 tablets are derived from the same
reference design. Add a .dtsi file with all the common bits to avoid
endless copy and pasting of these.

The sun6i-reference-design-tablet.dtsi this commit adds is a copy
of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits
removed / left in sun6i-a31s-colorfly-e708-q1.dts.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
index 34d8710..882a4d8 100644 (file)
--- a/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
+++ b/arch/arm/boot/dts/sun6i-a31s-colorfly-e708-q1.dts
@@ -42,32 +42,11 @@
 
 /dts-v1/;
 #include "sun6i-a31s.dtsi"
-#include "sunxi-common-regulators.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/sun4i-a10.h>
+#include "sun6i-reference-design-tablet.dtsi"
 
 / {
        model = "Colorfly E708 Q1 tablet";
        compatible = "colorfly,e708-q1", "allwinner,sun6i-a31s";
-
-       aliases {
-               serial0 = &uart0;
-       };
-
-       chosen {
-               stdout-path = "serial0:115200n8";
-       };
-};
-
-&cpu0 {
-       cpu-supply = <&reg_dcdc3>;
-};
-
-&ehci0 {
-       /* rtl8188etv wifi is connected here */
-       status = "okay";
 };
 
 &lradc {
@@ -82,136 +61,12 @@
        };
 };
 
-&mmc0 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
-       vmmc-supply = <&reg_dcdc1>;
-       bus-width = <4>;
-       cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-       cd-inverted;
-       status = "okay";
-};
-
-&pio {
-       mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
-               allwinner,pins = "PA8";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-
-       usb0_id_detect_pin: usb0_id_detect_pin@0 {
-               allwinner,pins = "PA15";
-               allwinner,function = "gpio_in";
-               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-       };
-};
-
-&p2wi {
-       status = "okay";
-
-       axp22x: pmic@68 {
-               compatible = "x-powers,axp221";
-               reg = <0x68>;
-               interrupt-parent = <&nmi_intc>;
-               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-               drivevbus-supply = <&reg_vcc5v0>;
-               x-powers,drive-vbus-en;
-       };
-};
-
-#include "axp22x.dtsi"
-
-&reg_aldo3 {
-       regulator-always-on;
-       regulator-min-microvolt = <2700000>;
-       regulator-max-microvolt = <3300000>;
-       regulator-name = "avcc";
-};
-
-&reg_dc1sw {
-       regulator-name = "vcc-lcd";
-};
-
-&reg_dc5ldo {
-       regulator-always-on;
-       regulator-min-microvolt = <700000>;
-       regulator-max-microvolt = <1320000>;
-       regulator-name = "vdd-cpus"; /* This is an educated guess */
-};
-
-&reg_dcdc1 {
-       regulator-always-on;
-       regulator-min-microvolt = <3000000>;
-       regulator-max-microvolt = <3000000>;
-       regulator-name = "vcc-3v0";
-};
-
-&reg_dcdc2 {
-       regulator-min-microvolt = <700000>;
-       regulator-max-microvolt = <1320000>;
-       regulator-name = "vdd-gpu";
-};
-
-&reg_dcdc3 {
-       regulator-always-on;
-       regulator-min-microvolt = <700000>;
-       regulator-max-microvolt = <1320000>;
-       regulator-name = "vdd-cpu";
-};
-
-&reg_dcdc4 {
-       regulator-always-on;
-       regulator-min-microvolt = <700000>;
-       regulator-max-microvolt = <1320000>;
-       regulator-name = "vdd-sys-dll";
-};
-
-&reg_dcdc5 {
-       regulator-always-on;
-       regulator-min-microvolt = <1500000>;
-       regulator-max-microvolt = <1500000>;
-       regulator-name = "vcc-dram";
-};
-
-&reg_dldo1 {
-       regulator-min-microvolt = <3300000>;
-       regulator-max-microvolt = <3300000>;
-       regulator-name = "vcc-wifi";
-};
-
 &reg_dldo2 {
        regulator-min-microvolt = <1800000>;
        regulator-max-microvolt = <1800000>;
        regulator-name = "vcc-pg";
 };
 
-&reg_drivevbus {
-       regulator-name = "usb0-vbus";
-       status = "okay";
-};
-
 &simplefb_lcd {
-       vcc-lcd-supply = <&reg_dc1sw>;
        vcc-pg-supply = <&reg_dldo2>;
 };
-
-&usb_otg {
-       dr_mode = "otg";
-       status = "okay";
-};
-
-&usb_power_supply {
-       status = "okay";
-};
-
-&usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&usb0_id_detect_pin>;
-       usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
-       usb0_vbus_power-supply = <&usb_power_supply>;
-       usb0_vbus-supply = <&reg_drivevbus>;
-       usb1_vbus-supply = <&reg_dldo1>;
-       status = "okay";
-};

diff --git a/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
new file mode 100644 (file)
index 0000000..0c43430
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-reference-design-tablet.dtsi
@@ -0,0 +1,193 @@
+/*
+ * Copyright 2016 Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sunxi-common-regulators.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+
+/ {
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+};
+
+&cpu0 {
+       cpu-supply = <&reg_dcdc3>;
+};
+
+&ehci0 {
+       /* Wifi is connected here */
+       status = "okay";
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_e708_q1>;
+       vmmc-supply = <&reg_dcdc1>;
+       bus-width = <4>;
+       cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
+       cd-inverted;
+       status = "okay";
+};
+
+&pio {
+       mmc0_cd_pin_e708_q1: mmc0_cd_pin@0 {
+               allwinner,pins = "PA8";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               allwinner,pins = "PA15";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+};
+
+&p2wi {
+       status = "okay";
+
+       axp22x: pmic@68 {
+               compatible = "x-powers,axp221";
+               reg = <0x68>;
+               interrupt-parent = <&nmi_intc>;
+               interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+               drivevbus-supply = <&reg_vcc5v0>;
+               x-powers,drive-vbus-en;
+       };
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+       regulator-always-on;
+       regulator-min-microvolt = <2700000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "avcc";
+};
+
+&reg_dc1sw {
+       regulator-name = "vcc-lcd";
+};
+
+&reg_dc5ldo {
+       regulator-always-on;
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1320000>;
+       regulator-name = "vdd-cpus"; /* This is an educated guess */
+};
+
+&reg_dcdc1 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1320000>;
+       regulator-name = "vdd-gpu";
+};
+
+&reg_dcdc3 {
+       regulator-always-on;
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1320000>;
+       regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc4 {
+       regulator-always-on;
+       regulator-min-microvolt = <700000>;
+       regulator-max-microvolt = <1320000>;
+       regulator-name = "vdd-sys-dll";
+};
+
+&reg_dcdc5 {
+       regulator-always-on;
+       regulator-min-microvolt = <1500000>;
+       regulator-max-microvolt = <1500000>;
+       regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-name = "vcc-wifi";
+};
+
+&reg_drivevbus {
+       regulator-name = "usb0-vbus";
+       status = "okay";
+};
+
+&simplefb_lcd {
+       vcc-lcd-supply = <&reg_dc1sw>;
+};
+
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usb_power_supply {
+       status = "okay";
+};
+
+&usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>;
+       usb0_id_det-gpio = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
+       usb0_vbus_power-supply = <&usb_power_supply>;
+       usb0_vbus-supply = <&reg_drivevbus>;
+       usb1_vbus-supply = <&reg_dldo1>;
+       status = "okay";
+};