!Edrivers/base/platform.c
!Edrivers/base/bus.c
</sect1>
- <sect1><title>Device Drivers DMA Management</title>
+ <sect1>
+ <title>Buffer Sharing and Synchronization</title>
+ <para>
+ The dma-buf subsystem provides the framework for sharing buffers
+ for hardware (DMA) access across multiple device drivers and
+ subsystems, and for synchronizing asynchronous hardware access.
+ </para>
+ <para>
+ This is used, for example, by drm "prime" multi-GPU support, but
+ is of course not limited to GPU use cases.
+ </para>
+ <para>
+ The three main components of this are: (1) dma-buf, representing
+ a sg_table and exposed to userspace as a file descriptor to allow
+ passing between devices, (2) fence, which provides a mechanism
+ to signal when one device as finished access, and (3) reservation,
+ which manages the shared or exclusive fence(s) associated with
+ the buffer.
+ </para>
+ <sect2><title>dma-buf</title>
!Edrivers/dma-buf/dma-buf.c
+!Iinclude/linux/dma-buf.h
+ </sect2>
+ <sect2><title>reservation</title>
+!Pdrivers/dma-buf/reservation.c Reservation Object Overview
+!Edrivers/dma-buf/reservation.c
+!Iinclude/linux/reservation.h
+ </sect2>
+ <sect2><title>fence</title>
!Edrivers/dma-buf/fence.c
-!Edrivers/dma-buf/seqno-fence.c
!Iinclude/linux/fence.h
+!Edrivers/dma-buf/seqno-fence.c
!Iinclude/linux/seqno-fence.h
-!Edrivers/dma-buf/reservation.c
-!Iinclude/linux/reservation.h
!Edrivers/dma-buf/sync_file.c
!Iinclude/linux/sync_file.h
+ </sect2>
+ </sect1>
+ <sect1><title>Device Drivers DMA Management</title>
!Edrivers/base/dma-coherent.c
!Edrivers/base/dma-mapping.c
</sect1>
| ARM | MMU-500 | #841119,#826419 | N/A |
| | | | |
| Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 |
+| Cavium | ThunderX ITS | #23144 | CAVIUM_ERRATUM_23144 |
| Cavium | ThunderX GICv3 | #23154 | CAVIUM_ERRATUM_23154 |
| Cavium | ThunderX Core | #27456 | CAVIUM_ERRATUM_27456 |
| Cavium | ThunderX SMMUv2 | #27704 | N/A |
BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
The enable method is specified by defining the following required
-properties in the "cpus" device tree node:
+properties in the "cpu" device tree node:
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <...>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "brcm,bcm11351-cpu-method";
- secondary-boot-reg = <0x3500417c>;
cpu0: cpu@0 {
device_type = "cpu";
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ enable-method = "brcm,bcm11351-cpu-method";
+ secondary-boot-reg = <0x3500417c>;
};
};
--- /dev/null
+Broadcom Kona Family CPU Enable Method
+--------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+ BCM23550
+
+The enable method is specified by defining the following required
+properties in the "cpu" device tree node:
+ - enable-method = "brcm,bcm23550";
+ - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU. The value written to the register is
+formed by encoding the target CPU id into the low bits of the
+physical start address it should jump to.
+
+Example:
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ enable-method = "brcm,bcm23550";
+ secondary-boot-reg = <0x3500417c>;
+ };
+ };
--- /dev/null
+Broadcom BCM23550 device tree bindings
+--------------------------------------
+
+This document describes the device tree bindings for boards with the BCM23550
+SoC.
+
+Required root node property:
+ - compatible: brcm,bcm23550
+
+Example:
+ / {
+ model = "BCM23550 SoC";
+ compatible = "brcm,bcm23550";
+ [...]
+ }
"allwinner,sun6i-a31"
"allwinner,sun8i-a23"
"arm,realview-smp"
+ "brcm,bcm11351-cpu-method"
+ "brcm,bcm23550"
"brcm,bcm-nsp-smp"
"brcm,brahma-b15"
"marvell,armada-375-smp"
"qcom,gcc-msm8660"
"qcom,kpss-acc-v1"
"qcom,kpss-acc-v2"
+ "renesas,apmu"
"rockchip,rk3036-smp"
"rockchip,rk3066-smp"
"ste,dbx500-smp"
-Olimex i.MX Platforms Device Tree Bindings
-------------------------------------------
+Olimex Device Tree Bindings
+---------------------------
+
+SAM9-L9260 Board
+Required root node properties:
+ - compatible = "olimex,sam9-l9260", "atmel,at91sam9260";
i.MX23 Olinuxino Low Cost Board
Required root node properties:
Required root node properties:
- compatible = "rockchip,rk3228-evb", "rockchip,rk3228";
+- Rockchip RK3229 Evaluation board:
+ - compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
+
- Rockchip RK3399 evb:
Required root node properties:
- compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
- "hardkernel,odroid-u3" - for Exynos4412-based Hardkernel Odroid U3.
- "hardkernel,odroid-x" - for Exynos4412-based Hardkernel Odroid X.
- "hardkernel,odroid-x2" - for Exynos4412-based Hardkernel Odroid X2.
+ - "hardkernel,odroid-xu" - for Exynos5410-based Hardkernel Odroid XU.
- "hardkernel,odroid-xu3" - for Exynos5422-based Hardkernel Odroid XU3.
- "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel
Odroid XU3 Lite board.
compatible = "renesas,ape6evm", "renesas,r8a73a4"
- Atmark Techno Armadillo-800 EVA
compatible = "renesas,armadillo800eva"
+ - Blanche (RTP0RC7792SEB00010S)
+ compatible = "renesas,blanche", "renesas,r8a7792"
- BOCK-W
compatible = "renesas,bockw", "renesas,r8a7778"
- Genmai (RTK772100BC00000BR)
display-timings are used instead.
Optional properties (required if display-timings are used):
+ - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
- display-timings : A node that describes the display timings as defined in
Documentation/devicetree/bindings/display/display-timing.txt.
- fsl,data-mapping : should be "spwg" or "jeida"
- reg: Memory map of eDMA CC
- reg-names: "edma3_cc"
- interrupts: Interrupt lines for CCINT, MPERR and CCERRINT.
-- interrupt-names: "edma3_ccint", "emda3_mperr" and "edma3_ccerrint"
+- interrupt-names: "edma3_ccint", "edma3_mperr" and "edma3_ccerrint"
- ti,tptcs: List of TPTCs associated with the eDMA in the following form:
<&tptc_phandle TC_priority_number>. The highest priority is 0.
reg = <0x49000000 0x10000>;
reg-names = "edma3_cc";
interrupts = <12 13 14>;
- interrupt-names = "edma3_ccint", "emda3_mperr", "edma3_ccerrint";
+ interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
--- /dev/null
+QCOM Secure Channel Manager (SCM)
+
+Qualcomm processors include an interface to communicate to the secure firmware.
+This interface allows for clients to request different types of actions. These
+can include CPU power up/down, HDCP requests, loading of firmware, and other
+assorted actions.
+
+Required properties:
+- compatible: must contain one of the following:
+ * "qcom,scm-apq8064" for APQ8064 platforms
+ * "qcom,scm-msm8660" for MSM8660 platforms
+ * "qcom,scm-msm8690" for MSM8690 platforms
+ * "qcom,scm" for later processors (MSM8916, APQ8084, MSM8974, etc)
+- clocks: One to three clocks may be required based on compatible.
+ * Only core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660", and "qcom,scm-msm8960"
+ * Core, iface, and bus clocks required for "qcom,scm"
+- clock-names: Must contain "core" for the core clock, "iface" for the interface
+ clock and "bus" for the bus clock per the requirements of the compatible.
+
+Example for MSM8916:
+
+ firmware {
+ scm {
+ compatible = "qcom,scm";
+ clocks = <&gcc GCC_CRYPTO_CLK> , <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ };
+ };
- "ti,ina220" for ina220
- "ti,ina226" for ina226
- "ti,ina230" for ina230
+ - "ti,ina231" for ina231
- reg: I2C address
Optional properties:
- our-claim-gpio: The GPIO that we use to claim the bus.
- their-claim-gpios: The GPIOs that the other sides use to claim the bus.
Note that some implementations may only support a single other master.
-- Standard I2C mux properties. See mux.txt in this directory.
-- Single I2C child bus node at reg 0. See mux.txt in this directory.
+- Standard I2C mux properties. See i2c-mux.txt in this directory.
+- Single I2C child bus node at reg 0. See i2c-mux.txt in this directory.
Optional properties:
- slew-delay-us: microseconds to wait for a GPIO to go high. Default is 10 us.
- i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C
parents.
-Furthermore, I2C mux properties and child nodes. See mux.txt in this directory.
+Furthermore, I2C mux properties and child nodes. See i2c-mux.txt in this
+directory.
Example:
- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
port is connected to.
- mux-gpios: list of gpios used to control the muxer
-* Standard I2C mux properties. See mux.txt in this directory.
-* I2C child bus nodes. See mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
Optional properties:
- idle-state: value to set the muxer to when idle. When no value is
be numbered based on their order in the device tree.
Whenever an access is made to a device on a child bus, the value set
-in the revelant node's reg property will be output using the list of
+in the relevant node's reg property will be output using the list of
GPIOs, the first in the list holding the least-significant value.
If an idle state is defined, using the idle-state (optional) property,
* Standard pinctrl properties that specify the pin mux state for each child
bus. See ../pinctrl/pinctrl-bindings.txt.
-* Standard I2C mux properties. See mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
-* I2C child bus nodes. See mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
For each named state defined in the pinctrl-names property, an I2C child bus
will be created. I2C child bus numbers are assigned based on the index into
- compatible: i2c-mux-reg
- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
port is connected to.
-* Standard I2C mux properties. See mux.txt in this directory.
-* I2C child bus nodes. See mux.txt in this directory.
+* Standard I2C mux properties. See i2c-mux.txt in this directory.
+* I2C child bus nodes. See i2c-mux.txt in this directory.
Optional properties:
- reg: this pair of <offset size> specifies the register to control the mux.
given, it defaults to the last value used.
Whenever an access is made to a device on a child bus, the value set
-in the revelant node's reg property will be output to the register.
+in the relevant node's reg property will be output to the register.
If an idle state is defined, using the idle-state (optional) property,
whenever an access is not being made to a device on a child bus, the
- clock-names : from common clock binding: must contain "mfc",
corresponding to entry in the clocks property.
- - samsung,mfc-r : Base address of the first memory bank used by MFC
- for DMA contiguous memory allocation and its size.
-
- - samsung,mfc-l : Base address of the second memory bank used by MFC
- for DMA contiguous memory allocation and its size.
-
Optional properties:
- power-domains : power-domain property defined with a phandle
to respective power domain.
+ - memory-region : from reserved memory binding: phandles to two reserved
+ memory regions, first is for "left" mfc memory bus interfaces,
+ second if for the "right" mfc memory bus, used when no SYSMMU
+ support is available
+
+Obsolete properties:
+ - samsung,mfc-r, samsung,mfc-l : support removed, please use memory-region
+ property instead
+
Example:
SoC specific DT entry:
clock-names = "mfc";
};
+Reserved memory specific DT entry for given board (see reserved memory binding
+for more information):
+
+reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mfc_left: region@51000000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x51000000 0x800000>;
+ };
+
+ mfc_right: region@43000000 {
+ compatible = "shared-dma-pool";
+ no-map;
+ reg = <0x43000000 0x800000>;
+ };
+};
+
Board specific DT entry:
codec@13400000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ memory-region = <&mfc_left>, <&mfc_right>;
};
initialization. This is an array of 28 values(u8).
- marvell,wakeup-pin: It represents wakeup pin number of the bluetooth chip.
- firmware will use the pin to wakeup host system.
+ firmware will use the pin to wakeup host system (u16).
- marvell,wakeup-gap-ms: wakeup gap represents wakeup latency of the host
platform. The value will be configured to firmware. This
- is needed to work chip's sleep feature as expected.
+ is needed to work chip's sleep feature as expected (u16).
- interrupt-parent: phandle of the parent interrupt controller
- interrupts : interrupt pin number to the cpu. Driver will request an irq based
on this interrupt number. During system suspend, the irq will be
0x37 0x01 0x1c 0x00 0xff 0xff 0xff 0xff 0x01 0x7f 0x04 0x02
0x00 0x00 0xba 0xce 0xc0 0xc6 0x2d 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0xf0 0x00>;
- marvell,wakeup-pin = <0x0d>;
- marvell,wakeup-gap-ms = <0x64>;
+ marvell,wakeup-pin = /bits/ 16 <0x0d>;
+ marvell,wakeup-gap-ms = /bits/ 16 <0x64>;
};
};
--- /dev/null
+DT bindings for the Renesas Advanced Power Management Unit
+
+Renesas R-Car line of SoCs utilize one or more APMU hardware units
+for CPU core power domain control including SMP boot and CPU Hotplug.
+
+Required properties:
+
+- compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback.
+ Examples with soctypes are:
+ - "renesas,r8a7790-apmu" (R-Car H2)
+ - "renesas,r8a7791-apmu" (R-Car M2-W)
+ - "renesas,r8a7792-apmu" (R-Car V2H)
+ - "renesas,r8a7793-apmu" (R-Car M2-N)
+ - "renesas,r8a7794-apmu" (R-Car E2)
+
+- reg: Base address and length of the I/O registers used by the APMU.
+
+- cpus: This node contains a list of CPU cores, which should match the order
+ of CPU cores used by the WUPCR and PSTR registers in the Advanced Power
+ Management Unit section of the device's datasheet.
+
+
+Example:
+
+This shows the r8a7791 APMU that can control CPU0 and CPU1.
+
+ apmu@e6152000 {
+ compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+ reg = <0 0xe6152000 0 0x188>;
+ cpus = <&cpu0 &cpu1>;
+ };
Required properties:
- compatible: Must be "ti,<soc>-ecap".
- for am33xx - compatible = "ti,am33xx-ecap";
- for da850 - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
+ for am4372 - compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+ for da850 - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+ for dra746 - compatible = "ti,dra746-ecap", "ti,am3352-ecap";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The PWM channel index ranges from 0 to 4. The only third
cell flag supported by this binding is PWM_POLARITY_INVERTED.
- reg: physical base address and size of the registers map.
Optional properties:
-- ti,hwmods: Name of the hwmod associated to the ECAP:
- "ecap<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the ECAP's functional clock.
+- clock-names: Must be set to "fck".
Example:
-ecap0: ecap@0 { /* ECAP on am33xx */
- compatible = "ti,am33xx-ecap";
+ecap0: ecap@48300100 { /* ECAP on am33xx */
+ compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48300100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
+};
+
+ecap0: ecap@48300100 { /* ECAP on am4372 */
+ compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
ti,hwmods = "ecap0";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
+};
+
+ecap0: ecap@1f06000 { /* ECAP on da850 */
+ compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+ #pwm-cells = <3>;
+ reg = <0x1f06000 0x80>;
};
-ecap0: ecap@0 { /* ECAP on da850 */
- compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ecap0: ecap@4843e100 {
+ compatible = "ti,dra746-ecap", "ti,am3352-ecap";
#pwm-cells = <3>;
- reg = <0x306000 0x80>;
+ reg = <0x4843e100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
};
Required properties:
- compatible: Must be "ti,<soc>-ehrpwm".
- for am33xx - compatible = "ti,am33xx-ehrpwm";
- for da850 - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ for am33xx - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ for am4372 - compatible = "ti,am4372-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ for da850 - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ for dra746 - compatible = "ti,dra746-ehrpwm", "ti-am3352-ehrpwm";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The only third cell flag supported by this binding is
PWM_POLARITY_INVERTED.
- reg: physical base address and size of the registers map.
Optional properties:
-- ti,hwmods: Name of the hwmod associated to the EHRPWM:
- "ehrpwm<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the PWM's time-base and functional clock.
+- clock-names: Must be set to "tbclk" and "fck".
Example:
-ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */
- compatible = "ti,am33xx-ehrpwm";
+ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
+ compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x100>;
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
+};
+
+ehrpwm0: pwm@48300200 { /* EHRPWM on am4372 */
+ compatible = "ti,am4372-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48300200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
ti,hwmods = "ehrpwm0";
};
-ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */
- compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ehrpwm0: pwm@1f00000 { /* EHRPWM on da850 */
+ compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x1f00000 0x2000>;
+};
+
+ehrpwm0: pwm@4843e200 { /* EHRPWM on dra746 */
+ compatible = "ti,dra746-ehrpwm", "ti,am3352-ehrpwm";
#pwm-cells = <3>;
- reg = <0x300000 0x2000>;
+ reg = <0x4843e200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
};
TI SOC based PWM Subsystem
Required properties:
-- compatible: Must be "ti,am33xx-pwmss";
+- compatible: Must be "ti,<soc>-pwmss".
+ for am33xx - compatible = "ti,am33xx-pwmss";
+ for am4372 - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+ for dra746 - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"
+
- reg: physical base address and size of the registers map.
- address-cells: Specify the number of u32 entries needed in child nodes.
Should set to 1.
Also child nodes should also populated under PWMSS DT node.
Example:
-pwmss0: pwmss@48300000 {
+epwmss0: epwmss@48300000 { /* PWMSS for am33xx */
compatible = "ti,am33xx-pwmss";
reg = <0x48300000 0x10>;
ti,hwmods = "epwmss0";
/* child nodes go here */
};
+
+epwmss0: epwmss@48300000 { /* PWMSS for am4372 */
+ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"
+ reg = <0x48300000 0x10>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges = <0x48300100 0x48300100 0x80 /* ECAP */
+ 0x48300180 0x48300180 0x80 /* EQEP */
+ 0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+ /* child nodes go here */
+};
+
+epwmss0: epwmss@4843e000 { /* PWMSS for DRA7xx */
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x4843e000 0x30>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* child nodes go here */
+};
--- /dev/null
+Qualcomm WCNSS Binding
+
+This binding describes the Qualcomm WCNSS hardware. It consists of control
+block and a BT, WiFi and FM radio block, all using SMD as command channels.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be: "qcom,wcnss",
+
+- qcom,smd-channel:
+ Usage: required
+ Value type: <string>
+ Definition: standard SMD property specifying the SMD channel used for
+ communication with the WiFi firmware.
+ Should be "WCNSS_CTRL".
+
+- qcom,mmio:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: reference to a node specifying the wcnss "ccu" and "dxe"
+ register blocks. The node must be compatible with one of
+ the following:
+ "qcom,riva",
+ "qcom,pronto"
+
+= SUBNODES
+The subnodes of the wcnss node are optional and describe the individual blocks in
+the WCNSS.
+
+== Bluetooth
+The following properties are defined to the bluetooth node:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be:
+ "qcom,wcnss-bt"
+
+== WiFi
+The following properties are defined to the WiFi node:
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,wcnss-wlan",
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the "rx" and "tx" interrupts
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must contain "rx" and "tx"
+
+- qcom,smem-state:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should reference the tx-enable and tx-rings-empty SMEM states
+
+- qcom,smem-state-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: must contain "tx-enable" and "tx-rings-empty"
+
+= EXAMPLE
+The following example represents a SMD node, with one edge representing the
+"pronto" subsystem, with the wcnss device and its wcn3680 BT and WiFi blocks
+described; as found on the 8974 platform.
+
+smd {
+ compatible = "qcom,smd";
+
+ pronto-edge {
+ interrupts = <0 142 1>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+
+ wcnss {
+ compatible = "qcom,wcnss";
+ qcom,smd-channels = "WCNSS_CTRL";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ qcom,mmio = <&pronto>;
+
+ bt {
+ compatible = "qcom,wcnss-bt";
+ };
+
+ wlan {
+ compatible = "qcom,wcnss-wlan";
+
+ interrupts = <0 145 0>, <0 146 0>;
+ interrupt-names = "tx", "rx";
+
+ qcom,smem-state = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+ };
+};
+
+soc {
+ pronto: pronto {
+ compatible = "qcom,pronto";
+
+ reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+ reg-names = "ccu", "dxe", "pmu";
+ };
+};
SUNW Sun Microsystems, Inc
tbs TBS Technologies
tcl Toby Churchill Ltd.
+technexion TechNexion
technologic Technologic Systems
thine THine Electronics, Inc.
ti Texas Instruments
truly Truly Semiconductors Limited
tyan Tyan Computer Corporation
upisemi uPI Semiconductor Corp.
+uniwest United Western Technologies Corp (UniWest)
urt United Radiant Technology Corporation
usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
+Each mount of the devpts filesystem is now distinct such that ptys
+and their indicies allocated in one mount are independent from ptys
+and their indicies in all other mounts.
-To support containers, we now allow multiple instances of devpts filesystem,
-such that indices of ptys allocated in one instance are independent of indices
-allocated in other instances of devpts.
+All mounts of the devpts filesystem now create a /dev/pts/ptmx node
+with permissions 0000.
-To preserve backward compatibility, this support for multiple instances is
-enabled only if:
+To retain backwards compatibility the a ptmx device node (aka any node
+created with "mknod name c 5 2") when opened will look for an instance
+of devpts under the name "pts" in the same directory as the ptmx device
+node.
- - CONFIG_DEVPTS_MULTIPLE_INSTANCES=y, and
- - '-o newinstance' mount option is specified while mounting devpts
-
-IOW, devpts now supports both single-instance and multi-instance semantics.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=n, there is no change in behavior and
-this referred to as the "legacy" mode. In this mode, the new mount options
-(-o newinstance and -o ptmxmode) will be ignored with a 'bogus option' message
-on console.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and devpts is mounted without the
-'newinstance' option (as in current start-up scripts) the new mount binds
-to the initial kernel mount of devpts. This mode is referred to as the
-'single-instance' mode and the current, single-instance semantics are
-preserved, i.e PTYs are common across the system.
-
-The only difference between this single-instance mode and the legacy mode
-is the presence of new, '/dev/pts/ptmx' node with permissions 0000, which
-can safely be ignored.
-
-If CONFIG_DEVPTS_MULTIPLE_INSTANCES=y and 'newinstance' option is specified,
-the mount is considered to be in the multi-instance mode and a new instance
-of the devpts fs is created. Any ptys created in this instance are independent
-of ptys in other instances of devpts. Like in the single-instance mode, the
-/dev/pts/ptmx node is present. To effectively use the multi-instance mode,
-open of /dev/ptmx must be a redirected to '/dev/pts/ptmx' using a symlink or
-bind-mount.
-
-Eg: A container startup script could do the following:
-
- $ chmod 0666 /dev/pts/ptmx
- $ rm /dev/ptmx
- $ ln -s pts/ptmx /dev/ptmx
- $ ns_exec -cm /bin/bash
-
- # We are now in new container
-
- $ umount /dev/pts
- $ mount -t devpts -o newinstance lxcpts /dev/pts
- $ sshd -p 1234
-
-where 'ns_exec -cm /bin/bash' calls clone() with CLONE_NEWNS flag and execs
-/bin/bash in the child process. A pty created by the sshd is not visible in
-the original mount of /dev/pts.
+As an option instead of placing a /dev/ptmx device node at /dev/ptmx
+it is possible to place a symlink to /dev/pts/ptmx at /dev/ptmx or
+to bind mount /dev/ptx/ptmx to /dev/ptmx. If you opt for using
+the devpts filesystem in this manner devpts should be mounted with
+the ptmxmode=0666, or chmod 0666 /dev/pts/ptmx should be called.
Total count of pty pairs in all instances is limited by sysctls:
kernel.pty.max = 4096 - global limit
-kernel.pty.reserve = 1024 - reserve for initial instance
+kernel.pty.reserve = 1024 - reserved for filesystems mounted from the initial mount namespace
kernel.pty.nr - current count of ptys
Per-instance limit could be set by adding mount option "max=<count>".
This feature was added in kernel 3.4 together with sysctl kernel.pty.reserve.
In kernels older than 3.4 sysctl kernel.pty.max works as per-instance limit.
-
-User-space changes
-------------------
-
-In multi-instance mode (i.e '-o newinstance' mount option is specified at least
-once), following user-space issues should be noted.
-
-1. If -o newinstance mount option is never used, /dev/pts/ptmx can be ignored
- and no change is needed to system-startup scripts.
-
-2. To effectively use multi-instance mode (i.e -o newinstance is specified)
- administrators or startup scripts should "redirect" open of /dev/ptmx to
- /dev/pts/ptmx using either a bind mount or symlink.
-
- $ mount -t devpts -o newinstance devpts /dev/pts
-
- followed by either
-
- $ rm /dev/ptmx
- $ ln -s pts/ptmx /dev/ptmx
- $ chmod 666 /dev/pts/ptmx
- or
- $ mount -o bind /dev/pts/ptmx /dev/ptmx
-
-3. The '/dev/ptmx -> pts/ptmx' symlink is the preferred method since it
- enables better error-reporting and treats both single-instance and
- multi-instance mounts similarly.
-
- But this method requires that system-startup scripts set the mode of
- /dev/pts/ptmx correctly (default mode is 0000). The scripts can set the
- mode by, either
-
- - adding ptmxmode mount option to devpts entry in /etc/fstab, or
- - using 'chmod 0666 /dev/pts/ptmx'
-
-4. If multi-instance mode mount is needed for containers, but the system
- startup scripts have not yet been updated, container-startup scripts
- should bind mount /dev/ptmx to /dev/pts/ptmx to avoid breaking single-
- instance mounts.
-
- Or, in general, container-startup scripts should use:
-
- mount -t devpts -o newinstance -o ptmxmode=0666 devpts /dev/pts
- if [ ! -L /dev/ptmx ]; then
- mount -o bind /dev/pts/ptmx /dev/ptmx
- fi
-
- When all devpts mounts are multi-instance, /dev/ptmx can permanently be
- a symlink to pts/ptmx and the bind mount can be ignored.
-
-5. A multi-instance mount that is not accompanied by the /dev/ptmx to
- /dev/pts/ptmx redirection would result in an unusable/unreachable pty.
-
- mount -t devpts -o newinstance lxcpts /dev/pts
-
- immediately followed by:
-
- open("/dev/ptmx")
-
- would create a pty, say /dev/pts/7, in the initial kernel mount.
- But /dev/pts/7 would be invisible in the new mount.
-
-6. The permissions for /dev/pts/ptmx node should be specified when mounting
- /dev/pts, using the '-o ptmxmode=%o' mount option (default is 0000).
-
- mount -t devpts -o newinstance -o ptmxmode=0644 devpts /dev/pts
-
- The permissions can be later be changed as usual with 'chmod'.
-
- chmod 666 /dev/pts/ptmx
-
-7. A mount of devpts without the 'newinstance' option results in binding to
- initial kernel mount. This behavior while preserving legacy semantics,
- does not provide strict isolation in a container environment. i.e by
- mounting devpts without the 'newinstance' option, a container could
- get visibility into the 'host' or root container's devpts.
-
- To workaround this and have strict isolation, all mounts of devpts,
- including the mount in the root container, should use the newinstance
- option.
address the kernel panicked.
end
+define dump_log_idx
+ set $idx = $arg0
+ if ($argc > 1)
+ set $prev_flags = $arg1
+ else
+ set $prev_flags = 0
+ end
+ set $msg = ((struct printk_log *) (log_buf + $idx))
+ set $prefix = 1
+ set $newline = 1
+ set $log = log_buf + $idx + sizeof(*$msg)
-define dmesg
- set $i = 0
- set $end_idx = (log_end - 1) & (log_buf_len - 1)
+ # prev & LOG_CONT && !(msg->flags & LOG_PREIX)
+ if (($prev_flags & 8) && !($msg->flags & 4))
+ set $prefix = 0
+ end
+
+ # msg->flags & LOG_CONT
+ if ($msg->flags & 8)
+ # (prev & LOG_CONT && !(prev & LOG_NEWLINE))
+ if (($prev_flags & 8) && !($prev_flags & 2))
+ set $prefix = 0
+ end
+ # (!(msg->flags & LOG_NEWLINE))
+ if (!($msg->flags & 2))
+ set $newline = 0
+ end
+ end
+
+ if ($prefix)
+ printf "[%5lu.%06lu] ", $msg->ts_nsec / 1000000000, $msg->ts_nsec % 1000000000
+ end
+ if ($msg->text_len != 0)
+ eval "printf \"%%%d.%ds\", $log", $msg->text_len, $msg->text_len
+ end
+ if ($newline)
+ printf "\n"
+ end
+ if ($msg->dict_len > 0)
+ set $dict = $log + $msg->text_len
+ set $idx = 0
+ set $line = 1
+ while ($idx < $msg->dict_len)
+ if ($line)
+ printf " "
+ set $line = 0
+ end
+ set $c = $dict[$idx]
+ if ($c == '\0')
+ printf "\n"
+ set $line = 1
+ else
+ if ($c < ' ' || $c >= 127 || $c == '\\')
+ printf "\\x%02x", $c
+ else
+ printf "%c", $c
+ end
+ end
+ set $idx = $idx + 1
+ end
+ printf "\n"
+ end
+end
+document dump_log_idx
+ Dump a single log given its index in the log buffer. The first
+ parameter is the index into log_buf, the second is optional and
+ specified the previous log buffer's flags, used for properly
+ formatting continued lines.
+end
- while ($i < logged_chars)
- set $idx = (log_end - 1 - logged_chars + $i) & (log_buf_len - 1)
+define dmesg
+ set $i = log_first_idx
+ set $end_idx = log_first_idx
+ set $prev_flags = 0
- if ($idx + 100 <= $end_idx) || \
- ($end_idx <= $idx && $idx + 100 < log_buf_len)
- printf "%.100s", &log_buf[$idx]
- set $i = $i + 100
+ while (1)
+ set $msg = ((struct printk_log *) (log_buf + $i))
+ if ($msg->len == 0)
+ set $i = 0
else
- printf "%c", log_buf[$idx]
- set $i = $i + 1
+ dump_log_idx $i $prev_flags
+ set $i = $i + $msg->len
+ set $prev_flags = $msg->flags
+ end
+ if ($i == $end_idx)
+ loop_break
end
end
end
Switch configuration
--------------------
-- priv_size: additional size needed by the switch driver for its private context
-
- tag_protocol: this is to indicate what kind of tagging protocol is supported,
should be a valid value from the dsa_tag_protocol enum
to the switch port MDIO registers. If unavailable return a negative error
code.
-- poll_link: Function invoked by DSA to query the link state of the switch
- builtin Ethernet PHYs, per port. This function is responsible for calling
- netif_carrier_{on,off} when appropriate, and can be used to poll all ports in a
- single call. Executes from workqueue context.
-
- adjust_link: Function invoked by the PHY library when a slave network device
is attached to a PHY device. This function is responsible for appropriately
configuring the switch port link parameters: speed, duplex, pause based on
Bridge VLAN filtering
---------------------
+- port_vlan_filtering: bridge layer function invoked when the bridge gets
+ configured for turning on or off VLAN filtering. If nothing specific needs to
+ be done at the hardware level, this callback does not need to be implemented.
+ When VLAN filtering is turned on, the hardware must be programmed with
+ rejecting 802.1Q frames which have VLAN IDs outside of the programmed allowed
+ VLAN ID map/rules. If there is no PVID programmed into the switch port,
+ untagged frames must be rejected as well. When turned off the switch must
+ accept any 802.1Q frames irrespective of their VLAN ID, and untagged frames are
+ allowed.
+
- port_vlan_prepare: bridge layer function invoked when the bridge prepares the
configuration of a VLAN on the given port. If the operation is not supported
by the hardware, this function should return -EOPNOTSUPP to inform the bridge
shared_media - BOOLEAN
Send(router) or accept(host) RFC1620 shared media redirects.
- Overrides ip_secure_redirects.
+ Overrides secure_redirects.
shared_media for the interface will be enabled if at least one of
conf/{all,interface}/shared_media is set to TRUE,
it will be disabled otherwise
default TRUE
secure_redirects - BOOLEAN
- Accept ICMP redirect messages only for gateways,
- listed in default gateway list.
+ Accept ICMP redirect messages only to gateways listed in the
+ interface's current gateway list. Even if disabled, RFC1122 redirect
+ rules still apply.
+ Overridden by shared_media.
secure_redirects for the interface will be enabled if at least one of
conf/{all,interface}/secure_redirects is set to TRUE,
it will be disabled otherwise
(*) Compute a Diffie-Hellman shared secret or public key
long keyctl(KEYCTL_DH_COMPUTE, struct keyctl_dh_params *params,
- char *buffer, size_t buflen);
+ char *buffer, size_t buflen,
+ void *reserved);
The params struct contains serial numbers for three keys:
public key. If the base is the remote public key, the result is
the shared secret.
+ The reserved argument must be set to NULL.
+
The buffer length must be at least the length of the prime, or zero.
If the buffer length is nonzero, the length of the result is
L: linux-clk@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git
S: Maintained
+F: Documentation/devicetree/bindings/clock/
F: drivers/clk/
X: drivers/clk/clkdev.c
F: include/linux/clk-pr*
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
S: Odd Fixes
+F: Documentation/devicetree/bindings/net/
F: drivers/net/
F: include/linux/if_*
F: include/linux/netdevice.h
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git
S: Maintained
+F: Documentation/devicetree/bindings/net/wireless/
F: drivers/net/wireless/
NETXEN (1/10) GbE SUPPORT
OPEN FIRMWARE AND FLATTENED DEVICE TREE
M: Rob Herring <robh+dt@kernel.org>
M: Frank Rowand <frowand.list@gmail.com>
-M: Grant Likely <grant.likely@linaro.org>
L: devicetree@vger.kernel.org
W: http://www.devicetree.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
S: Maintained
F: drivers/of/
F: include/linux/of*.h
OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
M: Rob Herring <robh+dt@kernel.org>
-M: Pawel Moll <pawel.moll@arm.com>
M: Mark Rutland <mark.rutland@arm.com>
-M: Ian Campbell <ijc+devicetree@hellion.org.uk>
-M: Kumar Gala <galak@codeaurora.org>
L: devicetree@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
+Q: http://patchwork.ozlabs.org/project/devicetree-bindings/list/
S: Maintained
F: Documentation/devicetree/
F: arch/*/boot/dts/
L: linux-gpio@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl.git
S: Maintained
+F: Documentation/devicetree/bindings/pinctrl/
F: drivers/pinctrl/
F: include/linux/pinctrl/
VERSION = 4
PATCHLEVEL = 7
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Psychotic Stoned Sheep
# *DOCUMENTATION*
def_bool y
config ARCH_DISCONTIGMEM_ENABLE
- def_bool y
+ def_bool n
config ARCH_FLATMEM_ENABLE
def_bool y
config ARC_HAS_COH_CACHES
def_bool n
-config ARC_HAS_REENTRANT_IRQ_LV2
- def_bool n
-
config ARC_MCIP
bool "ARConnect Multicore IP (MCIP) Support "
depends on ISA_ARCV2
if ISA_ARCOMPACT
config ARC_COMPACT_IRQ_LEVELS
- bool "ARCompact IRQ Priorities: High(2)/Low(1)"
+ bool "Setup Timer IRQ as high Priority"
default n
- # Timer HAS to be high priority, for any other high priority config
- select ARC_IRQ3_LV2
# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
- depends on !SMP || ARC_HAS_REENTRANT_IRQ_LV2
-
-if ARC_COMPACT_IRQ_LEVELS
-
-config ARC_IRQ3_LV2
- bool
-
-config ARC_IRQ5_LV2
- bool
-
-config ARC_IRQ6_LV2
- bool
-
-endif #ARC_COMPACT_IRQ_LEVELS
+ depends on !SMP
config ARC_FPU_SAVE_RESTORE
bool "Enable FPU state persistence across context switch"
default y
depends on !ARC_CANT_LLSC
-config ARC_STAR_9000923308
- bool "Workaround for llock/scond livelock"
- default n
- depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
-
config ARC_HAS_SWAPE
bool "Insn: SWAPE (endian-swap)"
default y
config HIGHMEM
bool "High Memory Support"
- select DISCONTIGMEM
+ select ARCH_DISCONTIGMEM_ENABLE
help
With ARC 2G:2G address split, only upper 2G is directly addressable by
kernel. Enable this to potentially allow access to rest of 2G and PAE
boot := arch/arc/boot
-#default target for make without any arguements.
+#default target for make without any arguments.
KBUILD_IMAGE := bootpImage
all: $(KBUILD_IMAGE)
/ {
- clock-frequency = <500000000>; /* 500 MHZ */
-
soc100 {
bus-frequency = <166666666>;
/ {
- clock-frequency = <500000000>; /* 500 MHZ */
-
soc100 {
bus-frequency = <166666666>;
/ {
compatible = "snps,arc";
- clock-frequency = <750000000>; /* 750 MHZ */
#address-cells = <1>;
#size-cells = <1>;
/ {
compatible = "snps,arc";
- clock-frequency = <90000000>;
#address-cells = <1>;
#size-cells = <1>;
/ {
compatible = "snps,arc";
- clock-frequency = <90000000>;
#address-cells = <1>;
#size-cells = <1>;
/ {
compatible = "ezchip,arc-nps";
- clock-frequency = <83333333>; /* 83.333333 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
/ {
compatible = "snps,nsim";
- clock-frequency = <80000000>; /* 80 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&core_intc>;
/ {
compatible = "snps,nsimosci";
- clock-frequency = <20000000>; /* 20 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&core_intc>;
/ {
compatible = "snps,nsimosci_hs";
- clock-frequency = <20000000>; /* 20 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&core_intc>;
/ {
compatible = "snps,nsimosci_hs";
- clock-frequency = <5000000>; /* 5 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&core_intc>;
/ {
compatible = "snps,arc";
- clock-frequency = <80000000>; /* 80 MHZ */
#address-cells = <1>;
#size-cells = <1>;
chosen { };
/ {
compatible = "snps,arc";
- clock-frequency = <80000000>; /* 80 MHZ */
#address-cells = <1>;
#size-cells = <1>;
chosen { };
/ {
compatible = "snps,arc";
- clock-frequency = <80000000>; /* 80 MHZ */
#address-cells = <1>;
#size-cells = <1>;
chosen { };
/ {
compatible = "snps,arc";
- clock-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <1>;
/ {
compatible = "snps,arc";
- clock-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <1>;
#define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
-#ifdef CONFIG_ARC_STAR_9000923308
-
-#define SCOND_FAIL_RETRY_VAR_DEF \
- unsigned int delay = 1, tmp; \
-
-#define SCOND_FAIL_RETRY_ASM \
- " bz 4f \n" \
- " ; --- scond fail delay --- \n" \
- " mov %[tmp], %[delay] \n" /* tmp = delay */ \
- "2: brne.d %[tmp], 0, 2b \n" /* while (tmp != 0) */ \
- " sub %[tmp], %[tmp], 1 \n" /* tmp-- */ \
- " rol %[delay], %[delay] \n" /* delay *= 2 */ \
- " b 1b \n" /* start over */ \
- "4: ; --- success --- \n" \
-
-#define SCOND_FAIL_RETRY_VARS \
- ,[delay] "+&r" (delay),[tmp] "=&r" (tmp) \
-
-#else /* !CONFIG_ARC_STAR_9000923308 */
-
-#define SCOND_FAIL_RETRY_VAR_DEF
-
-#define SCOND_FAIL_RETRY_ASM \
- " bnz 1b \n" \
-
-#define SCOND_FAIL_RETRY_VARS
-
-#endif
-
#define ATOMIC_OP(op, c_op, asm_op) \
static inline void atomic_##op(int i, atomic_t *v) \
{ \
- unsigned int val; \
- SCOND_FAIL_RETRY_VAR_DEF \
+ unsigned int val; \
\
__asm__ __volatile__( \
"1: llock %[val], [%[ctr]] \n" \
" " #asm_op " %[val], %[val], %[i] \n" \
" scond %[val], [%[ctr]] \n" \
- " \n" \
- SCOND_FAIL_RETRY_ASM \
- \
+ " bnz 1b \n" \
: [val] "=&r" (val) /* Early clobber to prevent reg reuse */ \
- SCOND_FAIL_RETRY_VARS \
: [ctr] "r" (&v->counter), /* Not "m": llock only supports reg direct addr mode */ \
[i] "ir" (i) \
: "cc"); \
#define ATOMIC_OP_RETURN(op, c_op, asm_op) \
static inline int atomic_##op##_return(int i, atomic_t *v) \
{ \
- unsigned int val; \
- SCOND_FAIL_RETRY_VAR_DEF \
+ unsigned int val; \
\
/* \
* Explicit full memory barrier needed before/after as \
"1: llock %[val], [%[ctr]] \n" \
" " #asm_op " %[val], %[val], %[i] \n" \
" scond %[val], [%[ctr]] \n" \
- " \n" \
- SCOND_FAIL_RETRY_ASM \
- \
+ " bnz 1b \n" \
: [val] "=&r" (val) \
- SCOND_FAIL_RETRY_VARS \
: [ctr] "r" (&v->counter), \
[i] "ir" (i) \
: "cc"); \
* We need to be a bit more cautious here. What if a kernel bug in
* L1 ISR, caused SP to go whaco (some small value which looks like
* USER stk) and then we take L2 ISR.
- * Above brlo alone would treat it as a valid L1-L2 sceanrio
- * instead of shouting alound
+ * Above brlo alone would treat it as a valid L1-L2 scenario
+ * instead of shouting around
* The only feasible way is to make sure this L2 happened in
* L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in
* L1 ISR before it switches stack
local_flush_tlb_all();
/*
- * Above checke for rollover of 8 bit ASID in 32 bit container.
+ * Above check for rollover of 8 bit ASID in 32 bit container.
* If the container itself wrapped around, set it to a non zero
* "generation" to distinguish from no context
*/
* Page Tables are purely for Linux VM's consumption and the bits below are
* suited to that (uniqueness). Hence some are not implemented in the TLB and
* some have different value in TLB.
- * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible becoz they live in
+ * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible because they live in
* seperate PD0 and PD1, which combined forms a translation entry)
* while for PTE perspective, they are 8 and 9 respectively
* with MMU v3: Most bits (except SHARED) represent the exact hardware pos
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->sp)
/*
- * Where abouts of Task's sp, fp, blink when it was last seen in kernel mode.
+ * Where about of Task's sp, fp, blink when it was last seen in kernel mode.
* Look in process.c for details of kernel stack layout
*/
#define TSK_K_ESP(tsk) (tsk->thread.ksp)
* (1) These insn were introduced only in 4.10 release. So for older released
* support needed.
*
- * (2) In a SMP setup, the LLOCK/SCOND atomiticity across CPUs needs to be
+ * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be
* gaurantted by the platform (not something which core handles).
* Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ
* disabling for atomicity.
#ifdef CONFIG_ARC_HAS_LLSC
-/*
- * A normal LLOCK/SCOND based system, w/o need for livelock workaround
- */
-#ifndef CONFIG_ARC_STAR_9000923308
-
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
unsigned int val;
smp_mb();
}
-#else /* CONFIG_ARC_STAR_9000923308 */
-
-/*
- * HS38x4 could get into a LLOCK/SCOND livelock in case of multiple overlapping
- * coherency transactions in the SCU. The exclusive line state keeps rotating
- * among contenting cores leading to a never ending cycle. So break the cycle
- * by deferring the retry of failed exclusive access (SCOND). The actual delay
- * needed is function of number of contending cores as well as the unrelated
- * coherency traffic from other cores. To keep the code simple, start off with
- * small delay of 1 which would suffice most cases and in case of contention
- * double the delay. Eventually the delay is sufficient such that the coherency
- * pipeline is drained, thus a subsequent exclusive access would succeed.
- */
-
-#define SCOND_FAIL_RETRY_VAR_DEF \
- unsigned int delay, tmp; \
-
-#define SCOND_FAIL_RETRY_ASM \
- " ; --- scond fail delay --- \n" \
- " mov %[tmp], %[delay] \n" /* tmp = delay */ \
- "2: brne.d %[tmp], 0, 2b \n" /* while (tmp != 0) */ \
- " sub %[tmp], %[tmp], 1 \n" /* tmp-- */ \
- " rol %[delay], %[delay] \n" /* delay *= 2 */ \
- " b 1b \n" /* start over */ \
- " \n" \
- "4: ; --- done --- \n" \
-
-#define SCOND_FAIL_RETRY_VARS \
- ,[delay] "=&r" (delay), [tmp] "=&r" (tmp) \
-
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
- unsigned int val;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[slock]] \n"
- " breq %[val], %[LOCKED], 0b \n" /* spin while LOCKED */
- " scond %[LOCKED], [%[slock]] \n" /* acquire */
- " bz 4f \n" /* done */
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val)
- SCOND_FAIL_RETRY_VARS
- : [slock] "r" (&(lock->slock)),
- [LOCKED] "r" (__ARCH_SPIN_LOCK_LOCKED__)
- : "memory", "cc");
-
- smp_mb();
-}
-
-/* 1 - lock taken successfully */
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
- unsigned int val, got_it = 0;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[slock]] \n"
- " breq %[val], %[LOCKED], 4f \n" /* already LOCKED, just bail */
- " scond %[LOCKED], [%[slock]] \n" /* acquire */
- " bz.d 4f \n"
- " mov.z %[got_it], 1 \n" /* got it */
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val),
- [got_it] "+&r" (got_it)
- SCOND_FAIL_RETRY_VARS
- : [slock] "r" (&(lock->slock)),
- [LOCKED] "r" (__ARCH_SPIN_LOCK_LOCKED__)
- : "memory", "cc");
-
- smp_mb();
-
- return got_it;
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
- smp_mb();
-
- lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
-
- smp_mb();
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- * Unfair locking as Writers could be starved indefinitely by Reader(s)
- */
-
-static inline void arch_read_lock(arch_rwlock_t *rw)
-{
- unsigned int val;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- /*
- * zero means writer holds the lock exclusively, deny Reader.
- * Otherwise grant lock to first/subseq reader
- *
- * if (rw->counter > 0) {
- * rw->counter--;
- * ret = 1;
- * }
- */
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[rwlock]] \n"
- " brls %[val], %[WR_LOCKED], 0b\n" /* <= 0: spin while write locked */
- " sub %[val], %[val], 1 \n" /* reader lock */
- " scond %[val], [%[rwlock]] \n"
- " bz 4f \n" /* done */
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val)
- SCOND_FAIL_RETRY_VARS
- : [rwlock] "r" (&(rw->counter)),
- [WR_LOCKED] "ir" (0)
- : "memory", "cc");
-
- smp_mb();
-}
-
-/* 1 - lock taken successfully */
-static inline int arch_read_trylock(arch_rwlock_t *rw)
-{
- unsigned int val, got_it = 0;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[rwlock]] \n"
- " brls %[val], %[WR_LOCKED], 4f\n" /* <= 0: already write locked, bail */
- " sub %[val], %[val], 1 \n" /* counter-- */
- " scond %[val], [%[rwlock]] \n"
- " bz.d 4f \n"
- " mov.z %[got_it], 1 \n" /* got it */
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val),
- [got_it] "+&r" (got_it)
- SCOND_FAIL_RETRY_VARS
- : [rwlock] "r" (&(rw->counter)),
- [WR_LOCKED] "ir" (0)
- : "memory", "cc");
-
- smp_mb();
-
- return got_it;
-}
-
-static inline void arch_write_lock(arch_rwlock_t *rw)
-{
- unsigned int val;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- /*
- * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
- * deny writer. Otherwise if unlocked grant to writer
- * Hence the claim that Linux rwlocks are unfair to writers.
- * (can be starved for an indefinite time by readers).
- *
- * if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) {
- * rw->counter = 0;
- * ret = 1;
- * }
- */
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[rwlock]] \n"
- " brne %[val], %[UNLOCKED], 0b \n" /* while !UNLOCKED spin */
- " mov %[val], %[WR_LOCKED] \n"
- " scond %[val], [%[rwlock]] \n"
- " bz 4f \n"
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val)
- SCOND_FAIL_RETRY_VARS
- : [rwlock] "r" (&(rw->counter)),
- [UNLOCKED] "ir" (__ARCH_RW_LOCK_UNLOCKED__),
- [WR_LOCKED] "ir" (0)
- : "memory", "cc");
-
- smp_mb();
-}
-
-/* 1 - lock taken successfully */
-static inline int arch_write_trylock(arch_rwlock_t *rw)
-{
- unsigned int val, got_it = 0;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[rwlock]] \n"
- " brne %[val], %[UNLOCKED], 4f \n" /* !UNLOCKED, bail */
- " mov %[val], %[WR_LOCKED] \n"
- " scond %[val], [%[rwlock]] \n"
- " bz.d 4f \n"
- " mov.z %[got_it], 1 \n" /* got it */
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val),
- [got_it] "+&r" (got_it)
- SCOND_FAIL_RETRY_VARS
- : [rwlock] "r" (&(rw->counter)),
- [UNLOCKED] "ir" (__ARCH_RW_LOCK_UNLOCKED__),
- [WR_LOCKED] "ir" (0)
- : "memory", "cc");
-
- smp_mb();
-
- return got_it;
-}
-
-static inline void arch_read_unlock(arch_rwlock_t *rw)
-{
- unsigned int val;
-
- smp_mb();
-
- /*
- * rw->counter++;
- */
- __asm__ __volatile__(
- "1: llock %[val], [%[rwlock]] \n"
- " add %[val], %[val], 1 \n"
- " scond %[val], [%[rwlock]] \n"
- " bnz 1b \n"
- " \n"
- : [val] "=&r" (val)
- : [rwlock] "r" (&(rw->counter))
- : "memory", "cc");
-
- smp_mb();
-}
-
-static inline void arch_write_unlock(arch_rwlock_t *rw)
-{
- unsigned int val;
-
- smp_mb();
-
- /*
- * rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
- */
- __asm__ __volatile__(
- "1: llock %[val], [%[rwlock]] \n"
- " scond %[UNLOCKED], [%[rwlock]]\n"
- " bnz 1b \n"
- " \n"
- : [val] "=&r" (val)
- : [rwlock] "r" (&(rw->counter)),
- [UNLOCKED] "r" (__ARCH_RW_LOCK_UNLOCKED__)
- : "memory", "cc");
-
- smp_mb();
-}
-
-#undef SCOND_FAIL_RETRY_VAR_DEF
-#undef SCOND_FAIL_RETRY_ASM
-#undef SCOND_FAIL_RETRY_VARS
-
-#endif /* CONFIG_ARC_STAR_9000923308 */
-
#else /* !CONFIG_ARC_HAS_LLSC */
static inline void arch_spin_lock(arch_spinlock_t *lock)
/*
* _TIF_ALLWORK_MASK includes SYSCALL_TRACE, but we don't need it.
- * SYSCALL_TRACE is anways seperately/unconditionally tested right after a
+ * SYSCALL_TRACE is anyway seperately/unconditionally tested right after a
* syscall, so all that reamins to be tested is _TIF_WORK_MASK
*/
#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
/*
- * Algorthmically, for __user_ok() we want do:
+ * Algorithmically, for __user_ok() we want do:
* (start < TASK_SIZE) && (start+len < TASK_SIZE)
* where TASK_SIZE could either be retrieved from thread_info->addr_limit or
* emitted directly in code.
__tmp ^ __in; \
})
-#elif (ARC_BSWAP_TYPE == 2) /* Custom single cycle bwap instruction */
+#elif (ARC_BSWAP_TYPE == 2) /* Custom single cycle bswap instruction */
#define __arch_swab32(x) \
({ \
VECTOR instr_service ; 0x10, Instrn Error (0x2)
; ******************** Device ISRs **********************
-#ifdef CONFIG_ARC_IRQ3_LV2
-VECTOR handle_interrupt_level2
-#else
-VECTOR handle_interrupt_level1
-#endif
-
-VECTOR handle_interrupt_level1
-
-#ifdef CONFIG_ARC_IRQ5_LV2
-VECTOR handle_interrupt_level2
-#else
-VECTOR handle_interrupt_level1
-#endif
-
-#ifdef CONFIG_ARC_IRQ6_LV2
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
VECTOR handle_interrupt_level2
#else
VECTOR handle_interrupt_level1
#endif
-.rept 25
+.rept 28
VECTOR handle_interrupt_level1 ; Other devices
.endr
{
int level_mask = 0;
- /* setup any high priority Interrupts (Level2 in ARCompact jargon) */
- level_mask |= IS_ENABLED(CONFIG_ARC_IRQ3_LV2) << 3;
- level_mask |= IS_ENABLED(CONFIG_ARC_IRQ5_LV2) << 5;
- level_mask |= IS_ENABLED(CONFIG_ARC_IRQ6_LV2) << 6;
+ /* Is timer high priority Interrupt (Level2 in ARCompact jargon) */
+ level_mask |= IS_ENABLED(CONFIG_ARC_COMPACT_IRQ_LEVELS) << TIMER0_IRQ;
/*
* Write to register, even if no LV2 IRQs configured to reset it
int64_t delta = new_raw_count - prev_raw_count;
/*
- * We don't afaraid of hwc->prev_count changing beneath our feet
+ * We aren't afraid of hwc->prev_count changing beneath our feet
* because there's no way for us to re-enter this function anytime.
*/
local64_set(&hwc->prev_count, new_raw_count);
/*
* If we are here, it is established that @uboot_arg didn't
* point to DT blob. Instead if u-boot says it is cmdline,
- * Appent to embedded DT cmdline.
+ * append to embedded DT cmdline.
* setup_machine_fdt() would have populated @boot_command_line
*/
if (uboot_tag == 1) {
* -ViXS were still seeing crashes when using insmod to load drivers.
* It turned out that the code to change Execute permssions for TLB entries
* of user was not guarded for interrupts (mod_tlb_permission)
- * This was cauing TLB entries to be overwritten on unrelated indexes
+ * This was causing TLB entries to be overwritten on unrelated indexes
*
* Vineetg: July 15th 2008: Bug #94183
* -Exception happens in Delay slot of a JMP, and before user space resumes,
return 0;
}
-/* called on user read(): display the couters */
+/* called on user read(): display the counters */
static ssize_t tlb_stats_output(struct file *file, /* file descriptor */
char __user *user_buf, /* user buffer */
size_t len, /* length of buffer */
* ------------------
* This ver of MMU supports variable page sizes (1k-16k): although Linux will
* only support 8k (default), 16k and 4k.
- * However from hardware perspective, smaller page sizes aggrevate aliasing
+ * However from hardware perspective, smaller page sizes aggravate aliasing
* meaning more vaddr bits needed to disambiguate the cache-line-op ;
* the existing scheme of piggybacking won't work for certain configurations.
* Two new registers IC_PTAG and DC_PTAG inttoduced.
/*
* This is technically for MMU v4, using the MMU v3 programming model
- * Special work for HS38 aliasing I-cache configuratino with PAE40
+ * Special work for HS38 aliasing I-cache configuration with PAE40
* - upper 8 bits of paddr need to be written into PTAG_HI
* - (and needs to be written before the lower 32 bits)
* Note that PTAG_HI is hoisted outside the line loop
ic->ver, CONFIG_ARC_MMU_VER);
/*
- * In MMU v4 (HS38x) the alising icache config uses IVIL/PTAG
+ * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG
* pair to provide vaddr/paddr respectively, just as in MMU v3
*/
if (is_isa_arcv2() && ic->alias)
* DMA Coherent API Notes
*
* I/O is inherently non-coherent on ARC. So a coherent DMA buffer is
- * implemented by accessintg it using a kernel virtual address, with
+ * implemented by accessing it using a kernel virtual address, with
* Cache bit off in the TLB entry.
*
* The default DMA address == Phy address which is 0x8000_0000 based.
evk-pro3.dtb \
tny_a9260.dtb \
usb_a9260.dtb \
+ at91sam9260ek.dtb \
at91sam9261ek.dtb \
at91sam9263ek.dtb \
+ at91-sam9_l9260.dtb \
tny_a9263.dtb \
usb_a9263.dtb \
at91-foxg20.dtb \
bcm958305k.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
bcm28155-ap.dtb \
- bcm21664-garnet.dtb
+ bcm21664-garnet.dtb \
+ bcm23550-sparrow.dtb
dtb-$(CONFIG_ARCH_BCM_NSP) += \
+ bcm958525xmc.dtb \
+ bcm958625hr.dtb \
bcm958625k.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2-sony-nsz-gs7.dtb \
berlin2q-marvell-dmp.dtb
dtb-$(CONFIG_ARCH_BRCMSTB) += \
bcm7445-bcm97445svmb.dtb
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+ ep7211-edb7211.dtb
dtb-$(CONFIG_ARCH_DAVINCI) += \
da850-enbw-cmc.dtb \
da850-evm.dtb
exynos5250-snow-rev5.dtb \
exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
+ exynos5410-odroidxu.dtb \
exynos5410-smdk5410.dtb \
exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \
imx6q-gw54xx.dtb \
imx6q-gw551x.dtb \
imx6q-gw552x.dtb \
+ imx6q-h100.dtb \
imx6q-hummingboard.dtb \
imx6q-icore-rqs.dtb \
imx6q-marsboard.dtb \
imx6q-tx6q-1110.dtb \
imx6q-tx6q-11x0-mb7.dtb \
imx6q-udoo.dtb \
+ imx6q-utilite-pro.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
imx6qp-nitrogen6_max.dtb \
imx6ul-tx6ul-mainboard.dtb
dtb-$(CONFIG_SOC_IMX7D) += \
imx7d-cl-som-imx7.dtb \
+ imx7d-colibri-eval-v3.dtb \
imx7d-nitrogen7.dtb \
imx7d-sbc-imx7.dtb \
- imx7d-sdb.dtb
+ imx7d-sdb.dtb \
+ imx7s-colibri-eval-v3.dtb
dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
ls1021a-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += \
imx23-evk.dtb \
imx23-olinuxino.dtb \
+ imx23-sansa.dtb \
imx23-stmp378x_devb.dtb \
+ imx23-xfi3.dtb \
imx28-apf28.dtb \
imx28-apf28dev.dtb \
imx28-apx4devkit.dtb \
dtb-$(CONFIG_ARCH_OXNAS) += \
wd-mbwe.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
- qcom-apq8064-arrow-db600c.dtb \
+ qcom-apq8060-dragonboard.dtb \
+ qcom-apq8064-arrow-sd-600eval.dtb \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8064-sony-xperia-yuga.dtb \
rk3066a-rayeager.dtb \
rk3188-radxarock.dtb \
rk3228-evb.dtb \
+ rk3229-evb.dtb \
rk3288-evb-act8846.dtb \
rk3288-evb-rk808.dtb \
rk3288-firefly-beta.dtb \
r8a7790-lager.dtb \
r8a7791-koelsch.dtb \
r8a7791-porter.dtb \
+ r8a7792-blanche.dtb \
r8a7793-gose.dtb \
r8a7794-alt.dtb \
r8a7794-silk.dtb \
};
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
num-ports = <2>;
status = "okay";
};
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ chosen {
+ stdout-path = &uart0;
+ };
+
leds {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>;
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <925000>;
- regulator-max-microvolt = <1325000>;
+ regulator-max-microvolt = <1351500>;
regulator-boot-on;
regulator-always-on;
};
phy-mode = "mii";
};
-&cpsw_emac1 {
- phy_id = <&davinci_mdio>, <1>;
- phy-mode = "mii";
-};
-
&mac {
+ slaves = <1>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
+&cpu0_opp_table {
+ /*
+ * All PG 2.0 silicon may not support 1GHz but some of the early
+ * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
+ * to support 1GHz OPP so enable it for PG 2.0 on this board.
+ */
+ oppnitro@1000000000 {
+ opp-supported-hw = <0x06 0x0100>;
+ };
+};
+
&am33xx_pinmux {
nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
pinctrl-single,pins = <
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1312500>;
+ regulator-max-microvolt = <1351500>;
regulator-boot-on;
regulator-always-on;
};
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1312500>;
+ regulator-max-microvolt = <1351500>;
regulator-boot-on;
regulator-always-on;
};
gpio-controller;
#gpio-cells = <2>;
};
+
+ pca9536: gpio@41 {
+ compatible = "ti,pca9536";
+ reg = <0x41>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
#include "tps65910.dtsi"
device_type = "cpu";
reg = <0>;
- /*
- * To consider voltage drop between PMIC and SoC,
- * tolerance value is reduced to 2% from 4% and
- * voltage value is increased as a precaution.
- */
- operating-points = <
- /* kHz uV */
- 720000 1285000
- 600000 1225000
- 500000 1125000
- 275000 1125000
- >;
- voltage-tolerance = <2>; /* 2 percentage */
+ operating-points-v2 = <&cpu0_opp_table>;
+ ti,syscon-efuse = <&scm_conf 0x7fc 0x1fff 0>;
+ ti,syscon-rev = <&scm_conf 0x600>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
};
};
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+
+ /*
+ * The three following nodes are marked with opp-suspend
+ * because the can not be enabled simultaneously on a
+ * single SoC.
+ */
+ opp50@300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <950000 931000 969000>;
+ opp-supported-hw = <0x06 0x0010>;
+ opp-suspend;
+ };
+
+ opp100@275000000 {
+ opp-hz = /bits/ 64 <275000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x01 0x00FF>;
+ opp-suspend;
+ };
+
+ opp100@300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x06 0x0020>;
+ opp-suspend;
+ };
+
+ opp100@500000000 {
+ opp-hz = /bits/ 64 <500000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ opp100@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0x06 0x0040>;
+ };
+
+ opp120@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1200000 1176000 1224000>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ opp120@720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1200000 1176000 1224000>;
+ opp-supported-hw = <0x06 0x0080>;
+ };
+
+ oppturbo@720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1260000 1234800 1285200>;
+ opp-supported-hw = <0x01 0xFFFF>;
+ };
+
+ oppturbo@800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1260000 1234800 1285200>;
+ opp-supported-hw = <0x06 0x0100>;
+ };
+
+ oppnitro@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1325000 1298500 1351500>;
+ opp-supported-hw = <0x04 0x0200>;
+ };
+ };
+
pmu {
compatible = "arm,cortex-a8-pmu";
interrupts = <3>;
reg = <0x49000000 0x10000>;
reg-names = "edma3_cc";
interrupts = <12 13 14>;
- interrupt-names = "edma3_ccint", "emda3_mperr",
+ interrupt-names = "edma3_ccint", "edma3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
0x48300200 0x48300200 0x80>; /* EHRPWM */
ecap0: ecap@48300100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <31>;
interrupt-names = "ecap0";
- ti,hwmods = "ecap0";
status = "disabled";
};
ehrpwm0: pwm@48300200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
- ti,hwmods = "ehrpwm0";
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
0x48302200 0x48302200 0x80>; /* EHRPWM */
ecap1: ecap@48302100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <47>;
interrupt-names = "ecap1";
- ti,hwmods = "ecap1";
status = "disabled";
};
ehrpwm1: pwm@48302200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
- ti,hwmods = "ehrpwm1";
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
0x48304200 0x48304200 0x80>; /* EHRPWM */
ecap2: ecap@48304100 {
- compatible = "ti,am33xx-ecap";
+ compatible = "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
interrupts = <61>;
interrupt-names = "ecap2";
- ti,hwmods = "ecap2";
status = "disabled";
};
ehrpwm2: pwm@48304200 {
- compatible = "ti,am33xx-ehrpwm";
+ compatible = "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
- ti,hwmods = "ehrpwm2";
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
reg = <0x80000000 0x10000000>; /* 256 MB */
};
- vbat: fixedregulator@0 {
+ vbat: fixedregulator {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
clocks = <&dpll_mpu_ck>;
clock-names = "cpu";
+ operating-points-v2 = <&cpu0_opp_table>;
+ ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>;
+ ti,syscon-rev = <&scm_conf 0x600>;
+
clock-latency = <300000>; /* From omap-cpufreq driver */
};
};
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+
+ opp50@300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <950000 931000 969000>;
+ opp-supported-hw = <0xFF 0x01>;
+ opp-suspend;
+ };
+
+ opp100@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <1100000 1078000 1122000>;
+ opp-supported-hw = <0xFF 0x04>;
+ };
+
+ opp120@720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <1200000 1176000 1224000>;
+ opp-supported-hw = <0xFF 0x08>;
+ };
+
+ oppturbo@800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1260000 1234800 1285200>;
+ opp-supported-hw = <0xFF 0x10>;
+ };
+
+ oppnitro@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1325000 1298500 1351500>;
+ opp-supported-hw = <0xFF 0x20>;
+ };
+ };
+
gic: interrupt-controller@48241000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma3_ccint", "emda3_mperr",
+ interrupt-names = "edma3_ccint", "edma3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
status = "disabled";
ecap0: ecap@48300100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48300100 0x80>;
- ti,hwmods = "ecap0";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
status = "disabled";
};
ehrpwm0: pwm@48300200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48300200 0x80>;
- ti,hwmods = "ehrpwm0";
+ clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
status = "disabled";
ecap1: ecap@48302100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48302100 0x80>;
- ti,hwmods = "ecap1";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
status = "disabled";
};
ehrpwm1: pwm@48302200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48302200 0x80>;
- ti,hwmods = "ehrpwm1";
+ clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
status = "disabled";
ecap2: ecap@48304100 {
- compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+ compatible = "ti,am4372-ecap",
+ "ti,am3352-ecap",
+ "ti,am33xx-ecap";
#pwm-cells = <3>;
reg = <0x48304100 0x80>;
- ti,hwmods = "ecap2";
+ clocks = <&l4ls_gclk>;
+ clock-names = "fck";
status = "disabled";
};
ehrpwm2: pwm@48304200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48304200 0x80>;
- ti,hwmods = "ehrpwm2";
+ clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
status = "disabled";
ehrpwm3: pwm@48306200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48306200 0x80>;
- ti,hwmods = "ehrpwm3";
+ clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
status = "disabled";
ehrpwm4: pwm@48308200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48308200 0x80>;
- ti,hwmods = "ehrpwm4";
+ clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
status = "disabled";
ehrpwm5: pwm@4830a200 {
- compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+ compatible = "ti,am4372-ehrpwm",
+ "ti,am3352-ehrpwm",
+ "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x4830a200 0x80>;
- ti,hwmods = "ehrpwm5";
+ clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
+ clock-names = "tbclk", "fck";
status = "disabled";
};
};
dma-names = "tx", "rx";
};
+ rng: rng@48310000 {
+ compatible = "ti,omap4-rng";
+ ti,hwmods = "rng";
+ reg = <0x48310000 0x2000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
mcasp0: mcasp@48038000 {
compatible = "ti,am33xx-mcasp-audio";
ti,hwmods = "mcasp0";
pinctrl-0 = <&dss_pins>;
port {
- dpi_out: endpoint@0 {
+ dpi_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
clock-names = "ext-clk", "int-clk";
status = "okay";
};
+
+&cpu {
+ cpu0-supply = <&dcdc2>;
+};
};
&mac {
+ slaves = <1>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
pinctrl-0 = <&dss_pinctrl_default>;
port {
- dpi_lcd_out: endpoint@0 {
+ dpi_lcd_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
pinctrl-0 = <&dss_pins>;
port {
- dpi_out: endpoint@0 {
+ dpi_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
clock-div = <1>;
};
+ rng_fck: rng_fck {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&sys_clkin_ck>;
+ clock-mult = <1>;
+ clock-div = <1>;
+ };
+
ehrpwm0_tbclk: ehrpwm0_tbclk@664 {
#clock-cells = <0>;
compatible = "ti,gate-clock";
vdda_video-supply = <&ldoln_reg>;
port {
- dpi_lcd_out: endpoint@0 {
+ dpi_lcd_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
};
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
num-ports = <2>;
atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
status = "okay";
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
};
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
num-ports = <2>;
status = "okay";
};
};
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
num-ports = <1>;
status = "okay";
};
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
};
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
num-ports = <2>;
status = "okay";
};
--- /dev/null
+/*
+ * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
+ *
+ * Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+ model = "Olimex sam9-l9260";
+ compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@fffa8000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot1_cmd_dat0
+ &pinctrl_mmc0_slot1_dat1_3>;
+ status = "okay";
+
+ slot@1 {
+ reg = <1>;
+ bus-width = <4>;
+ cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ macb0: ethernet@fffc4000 {
+ pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
+ phy-mode = "mii";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ spi0: spi@fffc8000 {
+ cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <15000000>;
+ reg = <0>;
+ };
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ pinctrl@fffff400 {
+ mmc0 {
+ pinctrl_board_mmc0: mmc0-board {
+ atmel,pins =
+ <AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH /* CD pin */
+ AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* WP pin */
+ };
+ };
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt = <1>;
+ status = "okay";
+ };
+
+ usb0: ohci@500000 {
+ status = "okay";
+ };
+
+ };
+
+ i2c@0 {
+ status = "okay";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pwr_led {
+ label = "sam9-l9260:yellow:pwr";
+ gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ };
+
+ status_led {
+ label = "sam9-l9260:green:status";
+ gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+ };
+};
i2c-sda-hold-time-ns = <350>;
status = "okay";
- pmic: act8865@5b {
- compatible = "active-semi,act8865";
+ pmic@5b {
+ compatible = "active-semi,act8945a";
reg = <0x5b>;
active-semi,vsel-high;
+ active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+ active-semi,irq_gpios = <&pioA 45 GPIO_ACTIVE_LOW>;
+ active-semi,input-voltage-threshold-microvolt = <6600>;
+ active-semi,precondition-timeout = <40>;
+ active-semi,total-timeout = <3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
status = "okay";
regulators {
- vdd_1v35_reg: DCDC_REG1 {
+ vdd_1v35_reg: REG_DCDC1 {
regulator-name = "VDD_1V35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
- vdd_1v2_reg: DCDC_REG2 {
+ vdd_1v2_reg: REG_DCDC2 {
regulator-name = "VDD_1V2";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
};
- vdd_3v3_reg: DCDC_REG3 {
+ vdd_3v3_reg: REG_DCDC3 {
regulator-name = "VDD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- vdd_fuse_reg: LDO_REG1 {
+ vdd_fuse_reg: REG_LDO1 {
regulator-name = "VDD_FUSE";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
- vdd_3v3_lp_reg: LDO_REG2 {
+ vdd_3v3_lp_reg: REG_LDO2 {
regulator-name = "VDD_3V3_LP";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- vdd_led_reg: LDO_REG3 {
+ vdd_led_reg: REG_LDO3 {
regulator-name = "VDD_LED";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
- vdd_sdhc_1v8_reg: LDO_REG4 {
+ vdd_sdhc_1v8_reg: REG_LDO4 {
regulator-name = "VDD_SDHC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
bias-disable;
};
+ pinctrl_charger_chglev: charger_chglev {
+ pinmux = <PIN_PA12__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_charger_irq: charger_irq {
+ pinmux = <PIN_PB13__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_charger_lbo: charger_lbo {
+ pinmux = <PIN_PC8__GPIO>;
+ bias-pull-up;
+ };
+
pinctrl_flx0_default: flx0_default {
pinmux = <PIN_PB28__FLEXCOM0_IO0>,
<PIN_PB29__FLEXCOM0_IO1>;
};
clocks {
- main_clock: main_clock {
- compatible = "atmel,osc", "fixed-clock";
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
clock-frequency = <12000000>;
};
status = "disabled";
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x100000>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
--- /dev/null
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ * Copyright (C) 2016 Atmel,
+ * 2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+ model = "Atmel at91sam9260ek";
+ compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+ chosen {
+ stdout-path = &dbgu;
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ slow_xtal {
+ clock-frequency = <32768>;
+ };
+
+ main_xtal {
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ usb1: gadget@fffa4000 {
+ atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ mmc0: mmc@fffa8000 {
+ pinctrl-0 = <
+ &pinctrl_board_mmc0_slot1
+ &pinctrl_mmc0_clk
+ &pinctrl_mmc0_slot1_cmd_dat0
+ &pinctrl_mmc0_slot1_dat1_3>;
+ status = "okay";
+ slot@1 {
+ reg = <1>;
+ bus-width = <4>;
+ cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ usart0: serial@fffb0000 {
+ pinctrl-0 =
+ <&pinctrl_usart0
+ &pinctrl_usart0_rts
+ &pinctrl_usart0_cts
+ &pinctrl_usart0_dtr_dsr
+ &pinctrl_usart0_dcd
+ &pinctrl_usart0_ri>;
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ status = "okay";
+ };
+
+ ssc0: ssc@fffbc000 {
+ status = "okay";
+ pinctrl-0 = <&pinctrl_ssc0_tx>;
+ };
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ spi0: spi@fffc8000 {
+ cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+ mtd_dataflash@0 {
+ compatible = "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <50000000>;
+ reg = <1>;
+ };
+ };
+
+ dbgu: serial@fffff200 {
+ status = "okay";
+ };
+
+ pinctrl@fffff400 {
+ board {
+ pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+ atmel,pins =
+ <AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ };
+ };
+
+ shdwc@fffffd10 {
+ atmel,wakeup-counter = <10>;
+ atmel,wakeup-rtt-timer;
+ };
+
+ rtc@fffffd20 {
+ atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+ status = "okay";
+ };
+
+ watchdog@fffffd40 {
+ status = "okay";
+ };
+
+ gpbr: syscon@fffffd50 {
+ status = "okay";
+ };
+ };
+
+ usb0: ohci@500000 {
+ num-ports = <2>;
+ status = "okay";
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ btn3 {
+ label = "Button 3";
+ gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+ linux,code = <0x103>;
+ gpio-key,wakeup;
+ };
+
+ btn4 {
+ label = "Button 4";
+ gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+ linux,code = <0x104>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2c@0 {
+ status = "okay";
+
+ 24c512@50 {
+ compatible = "24c512";
+ reg = <0x50>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ ds1 {
+ label = "ds1";
+ gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ ds5 {
+ label = "ds5";
+ gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
};
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
num-ports = <2>;
status = "okay";
};
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
enable-method = "brcm,bcm-nsp-smp";
- secondary-boot-reg = <0xffff042c>;
+ secondary-boot-reg = <0xffff0fec>;
reg = <0x1>;
};
};
status = "disabled";
};
+ dma@20000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x20000 0x1000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&iprocslow>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ };
+
nand: nand@26000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x026000 0x600>,
ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
status = "disabled";
+
+ msi-parent = <&msi0>;
+ msi0: msi@18012000 {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
+ <GIC_SPI 128 IRQ_TYPE_NONE>,
+ <GIC_SPI 129 IRQ_TYPE_NONE>,
+ <GIC_SPI 130 IRQ_TYPE_NONE>;
+ brcm,pcie-msi-inten;
+ };
};
pcie1: pcie@18013000 {
ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
status = "disabled";
+
+ msi-parent = <&msi1>;
+ msi1: msi@18013000 {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>,
+ <GIC_SPI 134 IRQ_TYPE_NONE>,
+ <GIC_SPI 135 IRQ_TYPE_NONE>,
+ <GIC_SPI 136 IRQ_TYPE_NONE>;
+ brcm,pcie-msi-inten;
+ };
};
pcie2: pcie@18014000 {
ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
status = "disabled";
+
+ msi-parent = <&msi2>;
+ msi2: msi@18014000 {
+ compatible = "brcm,iproc-msi";
+ msi-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>,
+ <GIC_SPI 140 IRQ_TYPE_NONE>,
+ <GIC_SPI 141 IRQ_TYPE_NONE>,
+ <GIC_SPI 142 IRQ_TYPE_NONE>;
+ brcm,pcie-msi-inten;
+ };
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "brcm,bcm11351-cpu-method";
cpu0: cpu@0 {
device_type = "cpu";
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
+ enable-method = "brcm,bcm11351-cpu-method";
secondary-boot-reg = <0x3500417c>;
reg = <1>;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- enable-method = "brcm,bcm11351-cpu-method";
cpu0: cpu@0 {
device_type = "cpu";
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
+ enable-method = "brcm,bcm11351-cpu-method";
secondary-boot-reg = <0x35004178>;
reg = <1>;
};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm23550.dtsi"
+
+/ {
+ model = "BCM23550 Sparrow board";
+ compatible = "brcm,bcm23550-sparrow", "brcm,bcm23550";
+
+ chosen {
+ stdout-path = "/slaves@3e000000/serial@0:115200n8";
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ memory {
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+};
+
+&uartb {
+ status = "okay";
+};
+
+&usbotg {
+ status = "okay";
+};
+
+&usbphy {
+ status = "okay";
+};
+
+&sdio1 {
+ max-frequency = <48000000>;
+ status = "okay";
+};
+
+&sdio2 {
+ non-removable;
+ max-frequency = <48000000>;
+ status = "okay";
+};
+
+&sdio4 {
+ max-frequency = <48000000>;
+ cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* BCM23550 and BCM21664 have almost identical clocks */
+#include "dt-bindings/clock/bcm21664.h"
+
+#include "skeleton.dtsi"
+
+/ {
+ model = "BCM23550 SoC";
+ compatible = "brcm,bcm23550";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ enable-method = "brcm,bcm23550";
+ secondary-boot-reg = <0x35004178>;
+ reg = <1>;
+ clock-frequency = <1000000000>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ enable-method = "brcm,bcm23550";
+ secondary-boot-reg = <0x35004178>;
+ reg = <2>;
+ clock-frequency = <1000000000>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ enable-method = "brcm,bcm23550";
+ secondary-boot-reg = <0x35004178>;
+ reg = <3>;
+ clock-frequency = <1000000000>;
+ };
+ };
+
+ /* Hub bus */
+ hub@34000000 {
+ compatible = "simple-bus";
+ ranges = <0 0x34000000 0x102f83ac>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ smc@4e000 {
+ compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
+ reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
+ };
+
+ resetmgr: reset-controller@1001f00 {
+ compatible = "brcm,bcm21664-resetmgr";
+ reg = <0x01001f00 0x24>;
+ };
+
+ gpio: gpio@1003000 {
+ compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
+ reg = <0x01003000 0x524>;
+ interrupts =
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ };
+
+ timer@1006000 {
+ compatible = "brcm,kona-timer";
+ reg = <0x01006000 0x1c>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+ };
+ };
+
+ /* Slaves bus */
+ slaves@3e000000 {
+ compatible = "simple-bus";
+ ranges = <0 0x3e000000 0x0001c070>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uartb: serial@0 {
+ compatible = "snps,dw-apb-uart";
+ status = "disabled";
+ reg = <0x00000000 0x118>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uartb2: serial@1000 {
+ compatible = "snps,dw-apb-uart";
+ status = "disabled";
+ reg = <0x00001000 0x118>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uartb3: serial@2000 {
+ compatible = "snps,dw-apb-uart";
+ status = "disabled";
+ reg = <0x00002000 0x118>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ bsc1: i2c@16000 {
+ compatible = "brcm,kona-i2c";
+ reg = <0x00016000 0x70>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+ status = "disabled";
+ };
+
+ bsc2: i2c@17000 {
+ compatible = "brcm,kona-i2c";
+ reg = <0x00017000 0x70>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+ status = "disabled";
+ };
+
+ bsc3: i2c@18000 {
+ compatible = "brcm,kona-i2c";
+ reg = <0x00018000 0x70>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+ status = "disabled";
+ };
+
+ bsc4: i2c@1c000 {
+ compatible = "brcm,kona-i2c";
+ reg = <0x0001c000 0x70>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+ status = "disabled";
+ };
+ };
+
+ /* Apps bus */
+ apps@3e300000 {
+ compatible = "simple-bus";
+ ranges = <0 0x3e300000 0x01b77000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ usbotg: usb@e20000 {
+ compatible = "snps,dwc2";
+ reg = <0x00e20000 0x10000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usb_otg_ahb_clk>;
+ clock-names = "otg";
+ phys = <&usbphy>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usbphy: usb-phy@e30000 {
+ compatible = "brcm,kona-usb2-phy";
+ reg = <0x00e30000 0x28>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ sdio1: sdio@e80000 {
+ compatible = "brcm,kona-sdhci";
+ reg = <0x00e80000 0x801c>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+ status = "disabled";
+ };
+
+ sdio2: sdio@e90000 {
+ compatible = "brcm,kona-sdhci";
+ reg = <0x00e90000 0x801c>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+ status = "disabled";
+ };
+
+ sdio3: sdio@ea0000 {
+ compatible = "brcm,kona-sdhci";
+ reg = <0x00ea0000 0x801c>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+ status = "disabled";
+ };
+
+ sdio4: sdio@eb0000 {
+ compatible = "brcm,kona-sdhci";
+ reg = <0x00eb0000 0x801c>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+ status = "disabled";
+ };
+
+ cdc: cdc@1b0e000 {
+ compatible = "brcm,bcm23550-cdc";
+ reg = <0x01b0e000 0x78>;
+ };
+
+ gic: interrupt-controller@1b21000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x01b21000 0x1000>,
+ <0x01b22000 0x1000>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /*
+ * Fixed clocks are defined before CCUs whose
+ * clocks may depend on them.
+ */
+
+ ref_32k_clk: ref_32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ bbl_32k_clk: bbl_32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ ref_13m_clk: ref_13m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ };
+
+ var_13m_clk: var_13m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ };
+
+ dft_19_5m_clk: dft_19_5m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <19500000>;
+ };
+
+ ref_crystal_clk: ref_crystal {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ };
+
+ ref_52m_clk: ref_52m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <52000000>;
+ };
+
+ var_52m_clk: var_52m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <52000000>;
+ };
+
+ usb_otg_ahb_clk: usb_otg_ahb {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <52000000>;
+ };
+
+ ref_96m_clk: ref_96m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <96000000>;
+ };
+
+ var_96m_clk: var_96m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <96000000>;
+ };
+
+ ref_104m_clk: ref_104m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <104000000>;
+ };
+
+ var_104m_clk: var_104m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <104000000>;
+ };
+
+ ref_156m_clk: ref_156m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <156000000>;
+ };
+
+ var_156m_clk: var_156m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <156000000>;
+ };
+
+ root_ccu: root_ccu {
+ compatible = BCM21664_DT_ROOT_CCU_COMPAT;
+ reg = <0x35001000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "frac_1m";
+ };
+
+ aon_ccu: aon_ccu {
+ compatible = BCM21664_DT_AON_CCU_COMPAT;
+ reg = <0x35002000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "hub_timer";
+ };
+
+ slave_ccu: slave_ccu {
+ compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
+ reg = <0x3e011000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "uartb",
+ "uartb2",
+ "uartb3",
+ "bsc1",
+ "bsc2",
+ "bsc3",
+ "bsc4";
+ };
+
+ master_ccu: master_ccu {
+ compatible = BCM21664_DT_MASTER_CCU_COMPAT;
+ reg = <0x3f001000 0x0f00>;
+ #clock-cells = <1>;
+ clock-output-names = "sdio1",
+ "sdio2",
+ "sdio3",
+ "sdio4",
+ "sdio1_sleep",
+ "sdio2_sleep",
+ "sdio3_sleep",
+ "sdio4_sleep";
+ };
+ };
+};
&usb3 {
vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
};
+
+&spi_nor {
+ status = "okay";
+};
&usb3 {
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};
};
};
};
+
+&spi_nor {
+ status = "okay";
+};
&spi_nor {
status = "okay";
};
+
+&srab {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
&usb2 {
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
+
+&spi_nor {
+ status = "okay";
+};
/* ChipCommon */
<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ /* Switch Register Access Block */
+ <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
/* PCIe Controller 0 */
<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
status = "disabled";
};
};
+
+ gmac0: ethernet@24000 {
+ reg = <0x24000 0x800>;
+ };
+
+ gmac1: ethernet@25000 {
+ reg = <0x25000 0x800>;
+ };
+
+ gmac2: ethernet@26000 {
+ reg = <0x26000 0x800>;
+ };
+
+ gmac3: ethernet@27000 {
+ reg = <0x27000 0x800>;
+ };
};
lcpll0: lcpll0@1800c100 {
"sata2";
};
+ srab: srab@18007000 {
+ compatible = "brcm,bcm5301x-srab";
+ reg = <0x18007000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ /* ports are defined in board DTS */
+ };
+
nand: nand@18028000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+ model = "NorthStar Plus XMC (BCM958525xmc)";
+ compatible = "brcm,bcm58525", "brcm,nsp";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&nand {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00200000>;
+ read-only;
+ };
+ partition@200000 {
+ label = "nenv";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@600000 {
+ label = "nsystem";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@1000000 {
+ label = "nrootfs";
+ reg = <0x01000000 0x03000000>;
+ };
+ partition@4000000 {
+ label = "ncustfs";
+ reg = <0x04000000 0x3c000000>;
+ };
+ };
+};
+
+/* XHCI, SATA, MMC, and Ethernet support needed to be complete */
+
+&uart0 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_sel>;
+ nand_sel: nand_sel {
+ function = "nand";
+ groups = "nand_grp";
+ };
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+ model = "NorthStar Plus SVK (BCM958625HR)";
+ compatible = "brcm,bcm58625", "brcm,nsp";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&nand {
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ reg = <0>;
+ nand-on-flash-bbt;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand-ecc-strength = <24>;
+ nand-ecc-step-size = <1024>;
+
+ brcm,nand-oob-sector-size = <27>;
+
+ partition@0 {
+ label = "nboot";
+ reg = <0x00000000 0x00200000>;
+ read-only;
+ };
+ partition@200000 {
+ label = "nenv";
+ reg = <0x00200000 0x00400000>;
+ };
+ partition@600000 {
+ label = "nsystem";
+ reg = <0x00600000 0x00a00000>;
+ };
+ partition@1000000 {
+ label = "nrootfs";
+ reg = <0x01000000 0x03000000>;
+ };
+ partition@4000000 {
+ label = "ncustfs";
+ reg = <0x04000000 0x3c000000>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_sel>;
+ nand_sel: nand_sel {
+ function = "nand";
+ groups = "nand_grp";
+ };
+};
};
};
- hdmi_conn: connector@0 {
+ hdmi_conn: connector {
compatible = "hdmi-connector";
label = "hdmi";
reg = <0x49000000 0x10000>;
reg-names = "edma3_cc";
interrupts = <12 13 14>;
- interrupt-names = "edma3_ccint", "emda3_mperr",
+ interrupt-names = "edma3_ccint", "edma3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
interrupt-parent = <&gic>;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+
+ operating-points-v2 = <&cpu0_opp_table>;
+ ti,syscon-efuse = <&scm_wkup 0x20c 0xf80000 19>;
+ ti,syscon-rev = <&scm_wkup 0x204>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ cooling-min-level = <0>;
+ cooling-max-level = <2>;
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp_nom@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1060000 850000 1150000>;
+ opp-supported-hw = <0xFF 0x01>;
+ opp-suspend;
+ };
+
+ opp_od@1176000000 {
+ opp-hz = /bits/ 64 <1176000000>;
+ opp-microvolt = <1160000 885000 1160000>;
+ opp-supported-hw = <0xFF 0x02>;
+ };
+ };
+
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
prm_clockdomains: clockdomains {
};
};
+
+ scm_wkup: scm_conf@c000 {
+ compatible = "syscon";
+ reg = <0xc000 0x1000>;
+ };
};
axi@0 {
ranges = <0x51800000 0x51800000 0x3000
0x0 0x30000000 0x10000000>;
status = "disabled";
- pcie@51000000 {
+ pcie@51800000 {
compatible = "ti,dra7-pcie";
reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
};
};
+ ocmcram1: ocmcram@40300000 {
+ compatible = "mmio-sram";
+ reg = <0x40300000 0x80000>;
+ ranges = <0x0 0x40300000 0x80000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * This is a placeholder for an optional reserved
+ * region for use by secure software. The size
+ * of this region is not known until runtime so it
+ * is set as zero to either be updated to reserve
+ * space or left unchanged to leave all SRAM for use.
+ * On HS parts that that require the reserved region
+ * either the bootloader can update the size to
+ * the required amount or the node can be overridden
+ * from the board dts file for the secure platform.
+ */
+ sram-hs@0 {
+ compatible = "ti,secure-ram";
+ reg = <0x0 0x0>;
+ };
+ };
+
+ /*
+ * NOTE: ocmcram2 and ocmcram3 are not available on all
+ * DRA7xx and AM57xx variants. Confirm availability in
+ * the data manual for the exact part number in use
+ * before enabling these nodes in the board dts file.
+ */
+ ocmcram2: ocmcram@40400000 {
+ status = "disabled";
+ compatible = "mmio-sram";
+ reg = <0x40400000 0x100000>;
+ ranges = <0x0 0x40400000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
+ ocmcram3: ocmcram@40500000 {
+ status = "disabled";
+ compatible = "mmio-sram";
+ reg = <0x40500000 0x100000>;
+ ranges = <0x0 0x40500000 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+
bandgap: bandgap@4a0021e0 {
reg = <0x4a0021e0 0xc
0x4a00232c 0xc
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma3_ccint", "emda3_mperr",
+ interrupt-names = "edma3_ccint", "edma3_mperr",
"edma3_ccerrint";
dma-requests = <64>;
#dma-cells = <2>;
clock-names = "fck", "sys_clk";
};
};
+
+ epwmss0: epwmss@4843e000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x4843e000 0x30>;
+ ti,hwmods = "epwmss0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm0: pwm@4843e200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x4843e200 0x80>;
+ clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap0: ecap@4843e100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x4843e100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss1: epwmss@48440000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48440000 0x30>;
+ ti,hwmods = "epwmss1";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm1: pwm@48440200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48440200 0x80>;
+ clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap1: ecap@48440100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48440100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ epwmss2: epwmss@48442000 {
+ compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+ reg = <0x48442000 0x30>;
+ ti,hwmods = "epwmss2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "disabled";
+ ranges;
+
+ ehrpwm2: pwm@48442200 {
+ compatible = "ti,dra746-ehrpwm",
+ "ti,am3352-ehrpwm";
+ #pwm-cells = <3>;
+ reg = <0x48442200 0x80>;
+ clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+ clock-names = "tbclk", "fck";
+ status = "disabled";
+ };
+
+ ecap2: ecap@48442100 {
+ compatible = "ti,dra746-ecap",
+ "ti,am3352-ecap";
+ #pwm-cells = <3>;
+ reg = <0x48442100 0x80>;
+ clocks = <&l4_root_clk_div>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ };
+
+ aes1: aes@4b500000 {
+ compatible = "ti,omap4-aes";
+ ti,hwmods = "aes1";
+ reg = <0x4b500000 0xa0>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ aes2: aes@4b700000 {
+ compatible = "ti,omap4-aes";
+ ti,hwmods = "aes2";
+ reg = <0x4b700000 0xa0>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ des: des@480a5000 {
+ compatible = "ti,omap4-des";
+ ti,hwmods = "des";
+ reg = <0x480a5000 0xa0>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+ dma-names = "tx", "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ sham: sham@53100000 {
+ compatible = "ti,omap5-sham";
+ ti,hwmods = "sham";
+ reg = <0x4b101000 0x300>;
+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 119 0>;
+ dma-names = "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+
+ rng: rng@48090000 {
+ compatible = "ti,omap4-rng";
+ ti,hwmods = "rng";
+ reg = <0x48090000 0x2000>;
+ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
};
thermal_zones: thermal-zones {
display0 = &hdmi0;
};
- evm_3v3: fixedregulator-evm_3v3 {
+ evm_3v3_sw: fixedregulator-evm_3v3 {
compatible = "regulator-fixed";
regulator-name = "evm_3v3";
regulator-min-microvolt = <3300000>;
/* TPS77018DBVT */
compatible = "regulator-fixed";
regulator-name = "aic_dvdd";
- vin-supply = <&evm_3v3>;
+ vin-supply = <&evm_3v3_sw>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
status = "okay";
/* Regulators */
- AVDD-supply = <&evm_3v3>;
- IOVDD-supply = <&evm_3v3>;
- DRVDD-supply = <&evm_3v3>;
+ AVDD-supply = <&evm_3v3_sw>;
+ IOVDD-supply = <&evm_3v3_sw>;
+ DRVDD-supply = <&evm_3v3_sw>;
DVDD-supply = <&aic_dvdd>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
- vmmc-supply = <&evm_3v3>;
+ vmmc-supply = <&evm_3v3_sw>;
bus-width = <8>;
ti,non-removable;
max-frequency = <192000000>;
/ {
compatible = "ti,dra722", "ti,dra72", "ti,dra7";
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0>;
-
- /* cooling options */
- cooling-min-level = <0>;
- cooling-max-level = <2>;
- #cooling-cells = <2>; /* min followed by max */
- };
- };
-
pmu {
compatible = "arm,cortex-a15-pmu";
interrupt-parent = <&wakeupgen>;
compatible = "ti,dra742", "ti,dra74", "ti,dra7";
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a15";
- reg = <0>;
-
- operating-points = <
- /* kHz uV */
- 1000000 1060000
- 1176000 1160000
- >;
-
- clocks = <&dpll_mpu_ck>;
- clock-names = "cpu";
-
- clock-latency = <300000>; /* From omap-cpufreq driver */
-
- /* cooling options */
- cooling-min-level = <0>;
- cooling-max-level = <2>;
- #cooling-cells = <2>; /* min followed by max */
- };
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <1>;
+ operating-points-v2 = <&cpu0_opp_table>;
};
};
model = "EMEV2 KZM9D Board";
compatible = "renesas,kzm9d", "renesas,emev2";
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x8000000>;
};
+ aliases {
+ serial1 = &uart1;
+ };
+
chosen {
- bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
- stdout-path = &uart1;
+ bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp";
+ stdout-path = "serial1:115200n8";
};
gpio_keys {
#address-cells = <1>;
#size-cells = <0>;
- button@1 {
+ one {
debounce_interval = <50>;
wakeup-source;
label = "DSW2-1";
linux,code = <KEY_1>;
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
};
- button@2 {
+ two {
debounce_interval = <50>;
wakeup-source;
label = "DSW2-2";
linux,code = <KEY_2>;
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
};
- button@3 {
+ three {
debounce_interval = <50>;
wakeup-source;
label = "DSW2-3";
linux,code = <KEY_3>;
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
- button@4 {
+ four {
debounce_interval = <50>;
wakeup-source;
label = "DSW2-4";
};
};
- reg_1p8v: regulator@0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-boot-on;
};
- reg_3p3v: regulator@1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
};
&pfc {
- uart1_pins: serial@e1030000 {
+ uart1_pins: uart1 {
groups = "uart1_ctrl", "uart1_data";
function = "uart1";
};
clock-frequency = <32768>;
#clock-cells = <0>;
};
- iic0_sclkdiv: iic0_sclkdiv {
+ iic0_sclkdiv: iic0_sclkdiv@624,0 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x624 0>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- iic0_sclk: iic0_sclk {
+ iic0_sclk: iic0_sclk@48c,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x48c 1>;
clocks = <&iic0_sclkdiv>;
#clock-cells = <0>;
};
- iic1_sclkdiv: iic1_sclkdiv {
+ iic1_sclkdiv: iic1_sclkdiv@624,16 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x624 16>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- iic1_sclk: iic1_sclk {
+ iic1_sclk: iic1_sclk@490,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x490 1>;
clocks = <&iic1_sclkdiv>;
clock-mult = <7000>;
#clock-cells = <0>;
};
- usia_u0_sclkdiv: usia_u0_sclkdiv {
+ usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x610 0>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- usib_u1_sclkdiv: usib_u1_sclkdiv {
+ usib_u1_sclkdiv: usib_u1_sclkdiv@65c,0 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x65c 0>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- usib_u2_sclkdiv: usib_u2_sclkdiv {
+ usib_u2_sclkdiv: usib_u2_sclkdiv@65c,16 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x65c 16>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- usib_u3_sclkdiv: usib_u3_sclkdiv {
+ usib_u3_sclkdiv: usib_u3_sclkdiv@660,0 {
compatible = "renesas,emev2-smu-clkdiv";
reg = <0x660 0>;
clocks = <&pll3_fo>;
#clock-cells = <0>;
};
- usia_u0_sclk: usia_u0_sclk {
+ usia_u0_sclk: usia_u0_sclk@4a0,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x4a0 1>;
clocks = <&usia_u0_sclkdiv>;
#clock-cells = <0>;
};
- usib_u1_sclk: usib_u1_sclk {
+ usib_u1_sclk: usib_u1_sclk@4b8,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x4b8 1>;
clocks = <&usib_u1_sclkdiv>;
#clock-cells = <0>;
};
- usib_u2_sclk: usib_u2_sclk {
+ usib_u2_sclk: usib_u2_sclk@4bc,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x4bc 1>;
clocks = <&usib_u2_sclkdiv>;
#clock-cells = <0>;
};
- usib_u3_sclk: usib_u3_sclk {
+ usib_u3_sclk: usib_u3_sclk@4c0,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x4c0 1>;
clocks = <&usib_u3_sclkdiv>;
#clock-cells = <0>;
};
- sti_sclk: sti_sclk {
+ sti_sclk: sti_sclk@528,1 {
compatible = "renesas,emev2-smu-gclk";
reg = <0x528 1>;
clocks = <&c32ki>;
--- /dev/null
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ */
+
+/dts-v1/;
+
+#include "skeleton.dtsi"
+
+#include <dt-bindings/clock/clps711x-clock.h>
+
+/ {
+ model = "Cirrus Logic EP7209";
+ compatible = "cirrus,ep7209";
+
+ aliases {
+ gpio0 = &porta;
+ gpio1 = &portb;
+ gpio3 = &portd;
+ gpio4 = &porte;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ spi0 = &spi;
+ timer0 = &timer1;
+ timer1 = &timer2;
+ };
+
+ cpus {
+ #address-cells = <0>;
+ #size-cells = <0>;
+
+ cpu {
+ device_type = "cpu";
+ compatible = "arm,arm720t";
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ clks: clks@80000000 {
+ #clock-cells = <1>;
+ compatible = "cirrus,ep7209-clk";
+ reg = <0x80000000 0xc000>;
+ startup-frequency = <73728000>;
+ };
+
+ intc: intc@80000000 {
+ compatible = "cirrus,ep7209-intc";
+ reg = <0x80000000 0x4000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ porta: gpio@80000000 {
+ compatible = "cirrus,ep7209-gpio";
+ reg = <0x80000000 0x1 0x80000040 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ portb: gpio@80000001 {
+ compatible = "cirrus,ep7209-gpio";
+ reg = <0x80000001 0x1 0x80000041 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ portd: gpio@80000003 {
+ compatible = "cirrus,ep7209-gpio";
+ reg = <0x80000003 0x1 0x80000043 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ porte: gpio@80000083 {
+ compatible = "cirrus,ep7209-gpio";
+ reg = <0x80000083 0x1 0x800000c3 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ syscon1: syscon@80000100 {
+ compatible = "cirrus,ep7209-syscon1", "syscon";
+ reg = <0x80000100 0x80>;
+ };
+
+ bus: bus@80000180 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "cirrus,ep7209-bus", "simple-bus";
+ clocks = <&clks CLPS711X_CLK_BUS>;
+ reg = <0x80000180 0x80>;
+ ranges = <
+ 0 0 0x00000000 0x10000000
+ 1 0 0x10000000 0x10000000
+ 2 0 0x20000000 0x10000000
+ 3 0 0x30000000 0x10000000
+ 4 0 0x40000000 0x10000000
+ 5 0 0x50000000 0x10000000
+ 6 0 0x60000000 0x0000c000
+ 7 0 0x70000000 0x00000080
+ >;
+ };
+
+ fb: fb@800002c0 {
+ compatible = "cirrus,ep7209-fb";
+ reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
+ clocks = <&clks CLPS711X_CLK_BUS>;
+ status = "disabled";
+ };
+
+ timer1: timer@80000300 {
+ compatible = "cirrus,ep7209-timer";
+ reg = <0x80000300 0x4>;
+ clocks = <&clks CLPS711X_CLK_TIMER1>;
+ interrupts = <8>;
+ };
+
+ timer2: timer@80000340 {
+ compatible = "cirrus,ep7209-timer";
+ reg = <0x80000340 0x4>;
+ clocks = <&clks CLPS711X_CLK_TIMER2>;
+ interrupts = <9>;
+ };
+
+ pwm: pwm@80000400 {
+ compatible = "cirrus,ep7209-pwm";
+ reg = <0x80000400 0x4>;
+ clocks = <&clks CLPS711X_CLK_PWM>;
+ #pwm-cells = <1>;
+ };
+
+ uart1: uart@80000480 {
+ compatible = "cirrus,ep7209-uart";
+ reg = <0x80000480 0x80>;
+ interrupts = <12 13>;
+ clocks = <&clks CLPS711X_CLK_UART>;
+ syscon = <&syscon1>;
+ };
+
+ spi: spi@80000500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cirrus,ep7209-spi";
+ reg = <0x80000500 0x4>;
+ interrupts = <15>;
+ clocks = <&clks CLPS711X_CLK_SPI>;
+ status = "disabled";
+ };
+
+ syscon2: syscon@80001100 {
+ compatible = "cirrus,ep7209-syscon2", "syscon";
+ reg = <0x80001100 0x80>;
+ };
+
+ uart2: uart@80001480 {
+ compatible = "cirrus,ep7209-uart";
+ reg = <0x80001480 0x80>;
+ interrupts = <28 29>;
+ clocks = <&clks CLPS711X_CLK_UART>;
+ syscon = <&syscon2>;
+ };
+
+ dai: dai@80002000 {
+ #sound-dai-cells = <0>;
+ compatible = "cirrus,ep7209-dai";
+ reg = <0x80002000 0x604>;
+ clocks = <&clks CLPS711X_CLK_PLL>;
+ clock-names = "pll";
+ interrupts = <32>;
+ status = "disabled";
+ };
+
+ syscon3: syscon@80002200 {
+ compatible = "cirrus,ep7209-syscon3", "syscon";
+ reg = <0x80002200 0x40>;
+ };
+ };
+
+ mctrl: mctrl {
+ compatible = "cirrus,ep7209-mctrl-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
--- /dev/null
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ */
+
+#include "ep7211.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "Cirrus Logic EP7211 Development Board";
+ compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
+
+ memory {
+ reg = <0xc0000000 0x02000000>;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0>;
+ brightness-levels = <
+ 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+ 0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf
+ >;
+ default-brightness-level = <0x0>;
+ power-supply = <&blen>;
+ };
+
+ display: display {
+ model = "320x240x4";
+ native-mode = <&timing0>;
+ bits-per-pixel = <4>;
+ ac-prescale = <17>;
+
+ display-timings {
+ timing0: 320x240 {
+ hactive = <320>;
+ hback-porch = <0>;
+ hfront-porch = <0>;
+ hsync-len = <0>;
+ vactive = <240>;
+ vback-porch = <0>;
+ vfront-porch = <0>;
+ vsync-len = <0>;
+ clock-frequency = <6500000>;
+ };
+ };
+ };
+
+ i2c: i2c {
+ compatible = "i2c-gpio";
+ gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
+ <&portd 5 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <2>;
+ i2c-gpio,scl-output-only;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ lcddc: lcddc {
+ compatible = "regulator-fixed";
+ regulator-name = "BACKLIGHT ENABLE";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&portd 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ blen: blen {
+ compatible = "regulator-fixed";
+ regulator-name = "BACKLIGHT ENABLE";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&portd 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&bus {
+ flash: nor@00000000 {
+ compatible = "cfi-flash";
+ reg = <0 0x00000000 0x02000000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&fb {
+ display = <&display>;
+ lcd-supply = <&lcddc>;
+ status = "okay";
+};
+
+&portd {
+ lcden {
+ gpio-hog;
+ gpios = <2 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "LCD ENABLE";
+ };
+};
--- /dev/null
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ */
+
+#include "ep7209.dtsi"
+
+/ {
+ model = "Cirrus Logic EP7211";
+ compatible = "cirrus,ep7211", "cirrus,ep7209";
+};
};
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
num-ports = <2>;
status = "okay";
};
};
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
num-ports = <2>;
status = "okay";
};
--- /dev/null
+/*
+ * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition.
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mfc_left: region_mfc_left {
+ compatible = "shared-dma-pool";
+ no-map;
+ size = <0x1000000>;
+ alignment = <0x100000>;
+ };
+
+ mfc_right: region_mfc_right {
+ compatible = "shared-dma-pool";
+ no-map;
+ size = <0x800000>;
+ alignment = <0x100000>;
+ };
+ };
+};
+
+&mfc {
+ memory-region = <&mfc_left>, <&mfc_right>;
+};
status = "okay";
};
-&mfc {
- status = "okay";
-};
-
&jpeg {
status = "okay";
};
clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
power-domains = <&pd_mfc>;
iommus = <&sysmmu_mfc>;
- status = "disabled";
};
sysmmu_mfc: sysmmu@13620000 {
clock-names = "mfc", "sclk_mfc";
iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
iommu-names = "left", "right";
- status = "disabled";
};
serial_0: serial@13800000 {
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4210";
};
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- status = "okay";
-};
-
&sdhci_0 {
bus-width = <4>;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>;
/dts-v1/;
#include "exynos4210.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung smdkv310 evaluation board based on Exynos4210";
};
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- status = "okay";
-};
-
&pinctrl_1 {
keypad_rows: keypad-rows {
samsung,pins = "gpx2-0", "gpx2-1";
#include "exynos4412.dtsi"
#include "exynos4412-ppmu-common.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
chosen {
regulator-name = "VDDQ_MMC2_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on;
regulator-boot-on;
};
};
ldo21_reg: LDO21 {
- regulator-name = "LDO21_3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
+ regulator-name = "TFLASH_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-boot-on;
+ };
+
+ ldo22_reg: LDO22 {
+ /*
+ * Only U3 uses it, so let it define the
+ * constraints
+ */
+ regulator-name = "LDO22";
regulator-boot-on;
};
};
buck8_reg: BUCK8 {
+ /*
+ * Constraints set by specific board: X,
+ * X2 and U3.
+ */
regulator-name = "BUCK8_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
};
};
};
&mshc_0 {
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
pinctrl-names = "default";
- vmmc-supply = <&ldo20_reg &buck8_reg>;
+ vmmc-supply = <&ldo20_reg>;
mmc-pwrseq = <&emmc_pwrseq>;
status = "okay";
bus-width = <4>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
pinctrl-names = "default";
- vmmc-supply = <&ldo4_reg &ldo21_reg>;
+ vmmc-supply = <&ldo21_reg>;
+ vqmmc-supply = <&ldo4_reg>;
cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>;
cd-inverted;
status = "okay";
};
};
+/* Supply for LAN9730/SMSC95xx */
+&buck8_reg {
+ regulator-name = "BUCK8_P3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+};
+
+/* VDDQ for MSHC (eMMC card) */
+&ldo22_reg {
+ regulator-name = "LDO22_VDDQ_MMC4_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+&mshc_0 {
+ vqmmc-supply = <&ldo22_reg>;
+};
+
&pwm {
pinctrl-0 = <&pwm0_out>;
pinctrl-names = "default";
};
};
+/* VDDQ for MSHC (eMMC card) */
+&buck8_reg {
+ regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
&ehci {
port@1 {
status = "okay";
};
};
+&mshc_0 {
+ vqmmc-supply = <&buck8_reg>;
+};
+
&pinctrl_1 {
gpio_home_key: home_key {
samsung,pins = "gpx2-2";
};
};
+/* VDDQ for MSHC (eMMC card) */
+&buck8_reg {
+ regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
+&mshc_0 {
+ vqmmc-supply = <&buck8_reg>;
+};
+
&sound {
simple-audio-card,name = "Odroid-X2";
simple-audio-card,widgets =
#include "exynos4412.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Origen evaluation board based on Exynos4412";
cpu0-supply = <&buck2_reg>;
};
+&exynos_usbphy {
+ status = "okay";
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx3 5 1>;
+ status = "okay";
+
+ port@1{
+ status = "okay";
+ };
+ port@2 {
+ status = "okay";
+ };
+};
+
&fimd {
pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
pinctrl-names = "default";
};
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- status = "okay";
-};
-
&mshc_0 {
pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
pinctrl-names = "default";
/dts-v1/;
#include "exynos4412.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung SMDK evaluation board based on Exynos4412";
};
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- status = "okay";
-};
-
&pinctrl_1 {
keypad_rows: keypad-rows {
samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
};
thermistor-ap {
- compatible = "ntc,ncp15wb473";
+ compatible = "murata,ncp15wb473";
pullup-uv = <1800000>; /* VCC_1.8V_AP */
pullup-ohm = <100000>; /* 100K */
pulldown-ohm = <100000>; /* 100K */
};
thermistor-battery {
- compatible = "ntc,ncp15wb473";
+ compatible = "murata,ncp15wb473";
pullup-uv = <1800000>; /* VCC_1.8V_AP */
pullup-ohm = <100000>; /* 100K */
pulldown-ohm = <100000>; /* 100K */
interrupt-parent = <&gic>;
aliases {
+ i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
+ i2c2 = &i2c_2;
+ i2c3 = &i2c_3;
serial0 = &serial_0;
serial1 = &serial_1;
serial2 = &serial_2;
serial3 = &serial_3;
};
- chipid@10000000 {
- compatible = "samsung,exynos4210-chipid";
- reg = <0x10000000 0x100>;
- };
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- memory-controller@12250000 {
- compatible = "samsung,exynos4210-srom";
- reg = <0x12250000 0x14>;
- };
+ chipid@10000000 {
+ compatible = "samsung,exynos4210-chipid";
+ reg = <0x10000000 0x100>;
+ };
- combiner: interrupt-controller@10440000 {
- compatible = "samsung,exynos4210-combiner";
- #interrupt-cells = <2>;
- interrupt-controller;
- samsung,combiner-nr = <32>;
- reg = <0x10440000 0x1000>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
- <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
- };
+ sromc: memory-controller@12250000 {
+ compatible = "samsung,exynos4210-srom";
+ reg = <0x12250000 0x14>;
+ };
- gic: interrupt-controller@10481000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x10481000 0x1000>,
- <0x10482000 0x1000>,
- <0x10484000 0x2000>,
- <0x10486000 0x2000>;
- interrupts = <1 9 0xf04>;
- };
+ combiner: interrupt-controller@10440000 {
+ compatible = "samsung,exynos4210-combiner";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ samsung,combiner-nr = <32>;
+ reg = <0x10440000 0x1000>;
+ interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
+ <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
+ <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
+ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
+ <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
+ <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
+ <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
+ <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+ };
- serial_0: serial@12C00000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C00000 0x100>;
- interrupts = <0 51 0>;
- };
+ gic: interrupt-controller@10481000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10481000 0x1000>,
+ <0x10482000 0x1000>,
+ <0x10484000 0x2000>,
+ <0x10486000 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
- serial_1: serial@12C10000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C10000 0x100>;
- interrupts = <0 52 0>;
- };
+ sysreg_system_controller: syscon@10050000 {
+ compatible = "samsung,exynos5-sysreg", "syscon";
+ reg = <0x10050000 0x5000>;
+ };
- serial_2: serial@12C20000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C20000 0x100>;
- interrupts = <0 53 0>;
- };
+ serial_0: serial@12C00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 51 0>;
+ };
- serial_3: serial@12C30000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C30000 0x100>;
- interrupts = <0 54 0>;
- };
+ serial_1: serial@12C10000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C10000 0x100>;
+ interrupts = <0 52 0>;
+ };
- rtc: rtc@101E0000 {
- compatible = "samsung,s3c6410-rtc";
- reg = <0x101E0000 0x100>;
- interrupts = <0 43 0>, <0 44 0>;
- status = "disabled";
- };
+ serial_2: serial@12C20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C20000 0x100>;
+ interrupts = <0 53 0>;
+ };
- fimd: fimd@14400000 {
- compatible = "samsung,exynos5250-fimd";
- interrupt-parent = <&combiner>;
- reg = <0x14400000 0x40000>;
- interrupt-names = "fifo", "vsync", "lcd_sys";
- interrupts = <18 4>, <18 5>, <18 6>;
- samsung,sysreg = <&sysreg_system_controller>;
- status = "disabled";
- };
+ serial_3: serial@12C30000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C30000 0x100>;
+ interrupts = <0 54 0>;
+ };
- dp: dp-controller@145B0000 {
- compatible = "samsung,exynos5-dp";
- reg = <0x145B0000 0x1000>;
- interrupts = <10 3>;
- interrupt-parent = <&combiner>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ i2c_0: i2c@12C60000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C60000 0x100>;
+ interrupts = <0 56 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ status = "disabled";
+ };
+
+ i2c_1: i2c@12C70000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C70000 0x100>;
+ interrupts = <0 57 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ status = "disabled";
+ };
+
+ i2c_2: i2c@12C80000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C80000 0x100>;
+ interrupts = <0 58 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ status = "disabled";
+ };
+
+ i2c_3: i2c@12C90000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C90000 0x100>;
+ interrupts = <0 59 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ status = "disabled";
+ };
+
+ pwm: pwm@12DD0000 {
+ compatible = "samsung,exynos4210-pwm";
+ reg = <0x12DD0000 0x100>;
+ samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+ #pwm-cells = <3>;
+ };
+
+ rtc: rtc@101E0000 {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x101E0000 0x100>;
+ interrupts = <0 43 0>, <0 44 0>;
+ status = "disabled";
+ };
+
+ fimd: fimd@14400000 {
+ compatible = "samsung,exynos5250-fimd";
+ interrupt-parent = <&combiner>;
+ reg = <0x14400000 0x40000>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <18 4>, <18 5>, <18 6>;
+ samsung,sysreg = <&sysreg_system_controller>;
+ status = "disabled";
+ };
+
+ dp: dp-controller@145B0000 {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145B0000 0x1000>;
+ interrupts = <10 3>;
+ interrupt-parent = <&combiner>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
status = "okay";
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
-};
-
&mmc_0 {
status = "okay";
num-slots = <1>;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
status = "okay";
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
-};
-
&mmc_0 {
status = "okay";
num-slots = <1>;
#address-cells = <1>;
#size-cells = <0>;
- i2c-parent = <&{/i2c@12CA0000}>;
+ i2c-parent = <&i2c_4>;
our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Spring";
status = "okay";
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
-};
-
&mmc_0 {
status = "okay";
num-slots = <1>;
mshc1 = &mmc_1;
mshc2 = &mmc_2;
mshc3 = &mmc_3;
- i2c0 = &i2c_0;
- i2c1 = &i2c_1;
- i2c2 = &i2c_2;
- i2c3 = &i2c_3;
i2c4 = &i2c_4;
i2c5 = &i2c_5;
i2c6 = &i2c_6;
};
};
- sysram@02020000 {
- compatible = "mmio-sram";
- reg = <0x02020000 0x30000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x02020000 0x30000>;
+ soc: soc {
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x30000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x30000>;
- smp-sysram@0 {
- compatible = "samsung,exynos4210-sysram";
- reg = <0x0 0x1000>;
- };
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
- smp-sysram@2f000 {
- compatible = "samsung,exynos4210-sysram-ns";
- reg = <0x2f000 0x1000>;
+ smp-sysram@2f000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x2f000 0x1000>;
+ };
};
- };
- pd_gsc: gsc-power-domain@10044000 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10044000 0x20>;
- #power-domain-cells = <0>;
- };
+ pd_gsc: gsc-power-domain@10044000 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044000 0x20>;
+ #power-domain-cells = <0>;
+ };
- pd_mfc: mfc-power-domain@10044040 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10044040 0x20>;
- #power-domain-cells = <0>;
- };
+ pd_mfc: mfc-power-domain@10044040 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044040 0x20>;
+ #power-domain-cells = <0>;
+ };
- pd_disp1: disp1-power-domain@100440A0 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x100440A0 0x20>;
- #power-domain-cells = <0>;
- clocks = <&clock CLK_FIN_PLL>,
- <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
- <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
- clock-names = "oscclk", "clk0", "clk1";
- };
+ pd_disp1: disp1-power-domain@100440A0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x100440A0 0x20>;
+ #power-domain-cells = <0>;
+ clocks = <&clock CLK_FIN_PLL>,
+ <&clock CLK_MOUT_ACLK200_DISP1_SUB>,
+ <&clock CLK_MOUT_ACLK300_DISP1_SUB>;
+ clock-names = "oscclk", "clk0", "clk1";
+ };
- clock: clock-controller@10010000 {
- compatible = "samsung,exynos5250-clock";
- reg = <0x10010000 0x30000>;
- #clock-cells = <1>;
- };
+ clock: clock-controller@10010000 {
+ compatible = "samsung,exynos5250-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
- clock_audss: audss-clock-controller@3810000 {
- compatible = "samsung,exynos5250-audss-clock";
- reg = <0x03810000 0x0C>;
- #clock-cells = <1>;
- clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
- <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
- clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
- };
+ clock_audss: audss-clock-controller@3810000 {
+ compatible = "samsung,exynos5250-audss-clock";
+ reg = <0x03810000 0x0C>;
+ #clock-cells = <1>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+ <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
+ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+ };
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
- /* Unfortunately we need this since some versions of U-Boot
- * on Exynos don't set the CNTFRQ register, so we need the
- * value from DT.
- */
- clock-frequency = <24000000>;
- };
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ /*
+ * Unfortunately we need this since some versions
+ * of U-Boot on Exynos don't set the CNTFRQ register,
+ * so we need the value from DT.
+ */
+ clock-frequency = <24000000>;
+ };
- mct@101C0000 {
- compatible = "samsung,exynos4210-mct";
- reg = <0x101C0000 0x800>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupt-parent = <&mct_map>;
- interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
- <4 0>, <5 0>;
- clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
- clock-names = "fin_pll", "mct";
-
- mct_map: mct-map {
+ mct@101C0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101C0000 0x800>;
+ interrupt-controller;
#interrupt-cells = <2>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = <0x0 0 &combiner 23 3>,
- <0x1 0 &combiner 23 4>,
- <0x2 0 &combiner 25 2>,
- <0x3 0 &combiner 25 3>,
- <0x4 0 &gic 0 120 0>,
- <0x5 0 &gic 0 121 0>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
+ <4 0>, <5 0>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0x0 0 &combiner 23 3>,
+ <0x1 0 &combiner 23 4>,
+ <0x2 0 &combiner 25 2>,
+ <0x3 0 &combiner 25 3>,
+ <0x4 0 &gic 0 120 0>,
+ <0x5 0 &gic 0 121 0>;
+ };
};
- };
-
- pmu {
- compatible = "arm,cortex-a15-pmu";
- interrupt-parent = <&combiner>;
- interrupts = <1 2>, <22 4>;
- };
-
- pinctrl_0: pinctrl@11400000 {
- compatible = "samsung,exynos5250-pinctrl";
- reg = <0x11400000 0x1000>;
- interrupts = <0 46 0>;
- wakup_eint: wakeup-interrupt-controller {
- compatible = "samsung,exynos4210-wakeup-eint";
- interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ pmu {
+ compatible = "arm,cortex-a15-pmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <1 2>, <22 4>;
};
- };
-
- pinctrl_1: pinctrl@13400000 {
- compatible = "samsung,exynos5250-pinctrl";
- reg = <0x13400000 0x1000>;
- interrupts = <0 45 0>;
- };
- pinctrl_2: pinctrl@10d10000 {
- compatible = "samsung,exynos5250-pinctrl";
- reg = <0x10d10000 0x1000>;
- interrupts = <0 50 0>;
- };
-
- pinctrl_3: pinctrl@03860000 {
- compatible = "samsung,exynos5250-pinctrl";
- reg = <0x03860000 0x1000>;
- interrupts = <0 47 0>;
- };
-
- pmu_system_controller: system-controller@10040000 {
- compatible = "samsung,exynos5250-pmu", "syscon";
- reg = <0x10040000 0x5000>;
- clock-names = "clkout16";
- clocks = <&clock CLK_FIN_PLL>;
- #clock-cells = <1>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- };
+ pinctrl_0: pinctrl@11400000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x11400000 0x1000>;
+ interrupts = <0 46 0>;
- sysreg_system_controller: syscon@10050000 {
- compatible = "samsung,exynos5-sysreg", "syscon";
- reg = <0x10050000 0x5000>;
- };
+ wakup_eint: wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <0 32 0>;
+ };
+ };
- watchdog@101D0000 {
- compatible = "samsung,exynos5250-wdt";
- reg = <0x101D0000 0x100>;
- interrupts = <0 42 0>;
- clocks = <&clock CLK_WDT>;
- clock-names = "watchdog";
- samsung,syscon-phandle = <&pmu_system_controller>;
- };
+ pinctrl_1: pinctrl@13400000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x13400000 0x1000>;
+ interrupts = <0 45 0>;
+ };
- g2d@10850000 {
- compatible = "samsung,exynos5250-g2d";
- reg = <0x10850000 0x1000>;
- interrupts = <0 91 0>;
- clocks = <&clock CLK_G2D>;
- clock-names = "fimg2d";
- iommus = <&sysmmu_g2d>;
- };
+ pinctrl_2: pinctrl@10d10000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x10d10000 0x1000>;
+ interrupts = <0 50 0>;
+ };
- mfc: codec@11000000 {
- compatible = "samsung,mfc-v6";
- reg = <0x11000000 0x10000>;
- interrupts = <0 96 0>;
- power-domains = <&pd_mfc>;
- clocks = <&clock CLK_MFC>;
- clock-names = "mfc";
- iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
- iommu-names = "left", "right";
- };
+ pinctrl_3: pinctrl@03860000 {
+ compatible = "samsung,exynos5250-pinctrl";
+ reg = <0x03860000 0x1000>;
+ interrupts = <0 47 0>;
+ };
- rotator: rotator@11C00000 {
- compatible = "samsung,exynos5250-rotator";
- reg = <0x11C00000 0x64>;
- interrupts = <0 84 0>;
- clocks = <&clock CLK_ROTATOR>;
- clock-names = "rotator";
- iommus = <&sysmmu_rotator>;
- };
+ pmu_system_controller: system-controller@10040000 {
+ compatible = "samsung,exynos5250-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+ clock-names = "clkout16";
+ clocks = <&clock CLK_FIN_PLL>;
+ #clock-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ };
- tmu: tmu@10060000 {
- compatible = "samsung,exynos5250-tmu";
- reg = <0x10060000 0x100>;
- interrupts = <0 65 0>;
- clocks = <&clock CLK_TMU>;
- clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
- };
+ watchdog@101D0000 {
+ compatible = "samsung,exynos5250-wdt";
+ reg = <0x101D0000 0x100>;
+ interrupts = <0 42 0>;
+ clocks = <&clock CLK_WDT>;
+ clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ };
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tmu 0>;
+ g2d@10850000 {
+ compatible = "samsung,exynos5250-g2d";
+ reg = <0x10850000 0x1000>;
+ interrupts = <0 91 0>;
+ clocks = <&clock CLK_G2D>;
+ clock-names = "fimg2d";
+ iommus = <&sysmmu_g2d>;
+ };
- cooling-maps {
- map0 {
- /* Corresponds to 800MHz at freq_table */
- cooling-device = <&cpu0 9 9>;
- };
- map1 {
- /* Corresponds to 200MHz at freq_table */
- cooling-device = <&cpu0 15 15>;
- };
- };
+ mfc: codec@11000000 {
+ compatible = "samsung,mfc-v6";
+ reg = <0x11000000 0x10000>;
+ interrupts = <0 96 0>;
+ power-domains = <&pd_mfc>;
+ clocks = <&clock CLK_MFC>;
+ clock-names = "mfc";
+ iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+ iommu-names = "left", "right";
};
- };
- sata: sata@122F0000 {
- compatible = "snps,dwc-ahci";
- samsung,sata-freq = <66>;
- reg = <0x122F0000 0x1ff>;
- interrupts = <0 115 0>;
- clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
- clock-names = "sata", "sclk_sata";
- phys = <&sata_phy>;
- phy-names = "sata-phy";
- status = "disabled";
- };
+ rotator: rotator@11C00000 {
+ compatible = "samsung,exynos5250-rotator";
+ reg = <0x11C00000 0x64>;
+ interrupts = <0 84 0>;
+ clocks = <&clock CLK_ROTATOR>;
+ clock-names = "rotator";
+ iommus = <&sysmmu_rotator>;
+ };
- sata_phy: sata-phy@12170000 {
- compatible = "samsung,exynos5250-sata-phy";
- reg = <0x12170000 0x1ff>;
- clocks = <&clock CLK_SATA_PHYCTRL>;
- clock-names = "sata_phyctrl";
- #phy-cells = <0>;
- samsung,syscon-phandle = <&pmu_system_controller>;
- status = "disabled";
- };
+ tmu: tmu@10060000 {
+ compatible = "samsung,exynos5250-tmu";
+ reg = <0x10060000 0x100>;
+ interrupts = <0 65 0>;
+ clocks = <&clock CLK_TMU>;
+ clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
- i2c_0: i2c@12C60000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12C60000 0x100>;
- interrupts = <0 56 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C0>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_bus>;
- samsung,sysreg-phandle = <&sysreg_system_controller>;
- status = "disabled";
- };
+ sata: sata@122F0000 {
+ compatible = "snps,dwc-ahci";
+ samsung,sata-freq = <66>;
+ reg = <0x122F0000 0x1ff>;
+ interrupts = <0 115 0>;
+ clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
+ clock-names = "sata", "sclk_sata";
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ status = "disabled";
+ };
- i2c_1: i2c@12C70000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12C70000 0x100>;
- interrupts = <0 57 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C1>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_bus>;
- samsung,sysreg-phandle = <&sysreg_system_controller>;
- status = "disabled";
- };
+ sata_phy: sata-phy@12170000 {
+ compatible = "samsung,exynos5250-sata-phy";
+ reg = <0x12170000 0x1ff>;
+ clocks = <&clock CLK_SATA_PHYCTRL>;
+ clock-names = "sata_phyctrl";
+ #phy-cells = <0>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ status = "disabled";
+ };
- i2c_2: i2c@12C80000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12C80000 0x100>;
- interrupts = <0 58 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C2>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_bus>;
- samsung,sysreg-phandle = <&sysreg_system_controller>;
- status = "disabled";
- };
+ /* i2c_0-3 are defined in exynos5.dtsi */
+ i2c_4: i2c@12CA0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CA0000 0x100>;
+ interrupts = <0 60 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_I2C4>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_bus>;
+ status = "disabled";
+ };
- i2c_3: i2c@12C90000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12C90000 0x100>;
- interrupts = <0 59 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C3>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_bus>;
- samsung,sysreg-phandle = <&sysreg_system_controller>;
- status = "disabled";
- };
+ i2c_5: i2c@12CB0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CB0000 0x100>;
+ interrupts = <0 61 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_I2C5>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_bus>;
+ status = "disabled";
+ };
- i2c_4: i2c@12CA0000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12CA0000 0x100>;
- interrupts = <0 60 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C4>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_bus>;
- status = "disabled";
- };
+ i2c_6: i2c@12CC0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CC0000 0x100>;
+ interrupts = <0 62 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_I2C6>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_bus>;
+ status = "disabled";
+ };
- i2c_5: i2c@12CB0000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12CB0000 0x100>;
- interrupts = <0 61 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C5>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_bus>;
- status = "disabled";
- };
+ i2c_7: i2c@12CD0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CD0000 0x100>;
+ interrupts = <0 63 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_I2C7>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_bus>;
+ status = "disabled";
+ };
- i2c_6: i2c@12CC0000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12CC0000 0x100>;
- interrupts = <0 62 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C6>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_bus>;
- status = "disabled";
- };
+ i2c_8: i2c@12CE0000 {
+ compatible = "samsung,s3c2440-hdmiphy-i2c";
+ reg = <0x12CE0000 0x1000>;
+ interrupts = <0 64 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_I2C_HDMI>;
+ clock-names = "i2c";
+ status = "disabled";
+ };
- i2c_7: i2c@12CD0000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12CD0000 0x100>;
- interrupts = <0 63 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C7>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c7_bus>;
- status = "disabled";
- };
+ i2c_9: i2c@121D0000 {
+ compatible = "samsung,exynos5-sata-phy-i2c";
+ reg = <0x121D0000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_SATA_PHYI2C>;
+ clock-names = "i2c";
+ status = "disabled";
+ };
- i2c_8: i2c@12CE0000 {
- compatible = "samsung,s3c2440-hdmiphy-i2c";
- reg = <0x12CE0000 0x1000>;
- interrupts = <0 64 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C_HDMI>;
- clock-names = "i2c";
- status = "disabled";
- };
+ spi_0: spi@12d20000 {
+ compatible = "samsung,exynos4210-spi";
+ status = "disabled";
+ reg = <0x12d20000 0x100>;
+ interrupts = <0 66 0>;
+ dmas = <&pdma0 5
+ &pdma0 4>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+ clock-names = "spi", "spi_busclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
+ };
- i2c_9: i2c@121D0000 {
- compatible = "samsung,exynos5-sata-phy-i2c";
- reg = <0x121D0000 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_SATA_PHYI2C>;
- clock-names = "i2c";
- status = "disabled";
- };
+ spi_1: spi@12d30000 {
+ compatible = "samsung,exynos4210-spi";
+ status = "disabled";
+ reg = <0x12d30000 0x100>;
+ interrupts = <0 67 0>;
+ dmas = <&pdma1 5
+ &pdma1 4>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+ clock-names = "spi", "spi_busclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ };
- spi_0: spi@12d20000 {
- compatible = "samsung,exynos4210-spi";
- status = "disabled";
- reg = <0x12d20000 0x100>;
- interrupts = <0 66 0>;
- dmas = <&pdma0 5
- &pdma0 4>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
- clock-names = "spi", "spi_busclk0";
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_bus>;
- };
+ spi_2: spi@12d40000 {
+ compatible = "samsung,exynos4210-spi";
+ status = "disabled";
+ reg = <0x12d40000 0x100>;
+ interrupts = <0 68 0>;
+ dmas = <&pdma0 7
+ &pdma0 6>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+ clock-names = "spi", "spi_busclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_bus>;
+ };
- spi_1: spi@12d30000 {
- compatible = "samsung,exynos4210-spi";
- status = "disabled";
- reg = <0x12d30000 0x100>;
- interrupts = <0 67 0>;
- dmas = <&pdma1 5
- &pdma1 4>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
- clock-names = "spi", "spi_busclk0";
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_bus>;
- };
+ mmc_0: mmc@12200000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ interrupts = <0 75 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12200000 0x1000>;
+ clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
+ };
- spi_2: spi@12d40000 {
- compatible = "samsung,exynos4210-spi";
- status = "disabled";
- reg = <0x12d40000 0x100>;
- interrupts = <0 68 0>;
- dmas = <&pdma0 7
- &pdma0 6>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
- clock-names = "spi", "spi_busclk0";
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_bus>;
- };
+ mmc_1: mmc@12210000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ interrupts = <0 76 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12210000 0x1000>;
+ clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
+ };
- mmc_0: mmc@12200000 {
- compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 75 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x12200000 0x1000>;
- clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
- clock-names = "biu", "ciu";
- fifo-depth = <0x80>;
- status = "disabled";
- };
+ mmc_2: mmc@12220000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ interrupts = <0 77 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12220000 0x1000>;
+ clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
+ };
- mmc_1: mmc@12210000 {
- compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 76 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x12210000 0x1000>;
- clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
- clock-names = "biu", "ciu";
- fifo-depth = <0x80>;
- status = "disabled";
- };
+ mmc_3: mmc@12230000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12230000 0x1000>;
+ interrupts = <0 78 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ status = "disabled";
+ };
- mmc_2: mmc@12220000 {
- compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 77 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x12220000 0x1000>;
- clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
- clock-names = "biu", "ciu";
- fifo-depth = <0x80>;
- status = "disabled";
- };
+ i2s0: i2s@03830000 {
+ compatible = "samsung,s5pv210-i2s";
+ status = "disabled";
+ reg = <0x03830000 0x100>;
+ dmas = <&pdma0 10
+ &pdma0 9
+ &pdma0 8>;
+ dma-names = "tx", "rx", "tx-sec";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+ samsung,idma-addr = <0x03000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ };
- mmc_3: mmc@12230000 {
- compatible = "samsung,exynos5250-dw-mshc";
- reg = <0x12230000 0x1000>;
- interrupts = <0 78 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
- clock-names = "biu", "ciu";
- fifo-depth = <0x80>;
- status = "disabled";
- };
+ i2s1: i2s@12D60000 {
+ compatible = "samsung,s3c6410-i2s";
+ status = "disabled";
+ reg = <0x12D60000 0x100>;
+ dmas = <&pdma1 12
+ &pdma1 11>;
+ dma-names = "tx", "rx";
+ clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
+ clock-names = "iis", "i2s_opclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_bus>;
+ };
- i2s0: i2s@03830000 {
- compatible = "samsung,s5pv210-i2s";
- status = "disabled";
- reg = <0x03830000 0x100>;
- dmas = <&pdma0 10
- &pdma0 9
- &pdma0 8>;
- dma-names = "tx", "rx", "tx-sec";
- clocks = <&clock_audss EXYNOS_I2S_BUS>,
- <&clock_audss EXYNOS_I2S_BUS>,
- <&clock_audss EXYNOS_SCLK_I2S>;
- clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
- samsung,idma-addr = <0x03000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_bus>;
- };
+ i2s2: i2s@12D70000 {
+ compatible = "samsung,s3c6410-i2s";
+ status = "disabled";
+ reg = <0x12D70000 0x100>;
+ dmas = <&pdma0 12
+ &pdma0 11>;
+ dma-names = "tx", "rx";
+ clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
+ clock-names = "iis", "i2s_opclk0";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2_bus>;
+ };
- i2s1: i2s@12D60000 {
- compatible = "samsung,s3c6410-i2s";
- status = "disabled";
- reg = <0x12D60000 0x100>;
- dmas = <&pdma1 12
- &pdma1 11>;
- dma-names = "tx", "rx";
- clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
- clock-names = "iis", "i2s_opclk0";
- pinctrl-names = "default";
- pinctrl-0 = <&i2s1_bus>;
- };
+ usb_dwc3 {
+ compatible = "samsung,exynos5250-dwusb3";
+ clocks = <&clock CLK_USB3>;
+ clock-names = "usbdrd30";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbdrd_dwc3: dwc3@12000000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x12000000 0x10000>;
+ interrupts = <0 72 0>;
+ phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
- i2s2: i2s@12D70000 {
- compatible = "samsung,s3c6410-i2s";
- status = "disabled";
- reg = <0x12D70000 0x100>;
- dmas = <&pdma0 12
- &pdma0 11>;
- dma-names = "tx", "rx";
- clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
- clock-names = "iis", "i2s_opclk0";
- pinctrl-names = "default";
- pinctrl-0 = <&i2s2_bus>;
- };
+ usbdrd_phy: phy@12100000 {
+ compatible = "samsung,exynos5250-usbdrd-phy";
+ reg = <0x12100000 0x100>;
+ clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <1>;
+ };
- usb_dwc3 {
- compatible = "samsung,exynos5250-dwusb3";
- clocks = <&clock CLK_USB3>;
- clock-names = "usbdrd30";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ ehci: usb@12110000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
- usbdrd_dwc3: dwc3@12000000 {
- compatible = "synopsys,dwc3";
- reg = <0x12000000 0x10000>;
- interrupts = <0 72 0>;
- phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
- phy-names = "usb2-phy", "usb3-phy";
+ clocks = <&clock CLK_USB2>;
+ clock-names = "usbhost";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&usb2_phy_gen 1>;
+ };
};
- };
-
- usbdrd_phy: phy@12100000 {
- compatible = "samsung,exynos5250-usbdrd-phy";
- reg = <0x12100000 0x100>;
- clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
- clock-names = "phy", "ref";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <1>;
- };
- ehci: usb@12110000 {
- compatible = "samsung,exynos4210-ehci";
- reg = <0x12110000 0x100>;
- interrupts = <0 71 0>;
+ ohci: usb@12120000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
- clocks = <&clock CLK_USB2>;
- clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2_phy_gen 1>;
+ clocks = <&clock CLK_USB2>;
+ clock-names = "usbhost";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&usb2_phy_gen 1>;
+ };
};
- };
- ohci: usb@12120000 {
- compatible = "samsung,exynos4210-ohci";
- reg = <0x12120000 0x100>;
- interrupts = <0 71 0>;
-
- clocks = <&clock CLK_USB2>;
- clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2_phy_gen 1>;
+ usb2_phy_gen: phy@12130000 {
+ compatible = "samsung,exynos5250-usb2-phy";
+ reg = <0x12130000 0x100>;
+ clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
+ clock-names = "phy", "ref";
+ #phy-cells = <1>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ samsung,pmureg-phandle = <&pmu_system_controller>;
};
- };
- usb2_phy_gen: phy@12130000 {
- compatible = "samsung,exynos5250-usb2-phy";
- reg = <0x12130000 0x100>;
- clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
- clock-names = "phy", "ref";
- #phy-cells = <1>;
- samsung,sysreg-phandle = <&sysreg_system_controller>;
- samsung,pmureg-phandle = <&pmu_system_controller>;
- };
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma0: pdma@121A0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121A0000 0x1000>;
+ interrupts = <0 34 0>;
+ clocks = <&clock CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@121B0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121B0000 0x1000>;
+ interrupts = <0 35 0>;
+ clocks = <&clock CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ mdma0: mdma@10800000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x10800000 0x1000>;
+ interrupts = <0 33 0>;
+ clocks = <&clock CLK_MDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
+ };
+
+ mdma1: mdma@11C10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x11C10000 0x1000>;
+ interrupts = <0 124 0>;
+ clocks = <&clock CLK_MDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
+ };
+ };
- pwm: pwm@12dd0000 {
- compatible = "samsung,exynos4210-pwm";
- reg = <0x12dd0000 0x100>;
- samsung,pwm-outputs = <0>, <1>, <2>, <3>;
- #pwm-cells = <3>;
- clocks = <&clock CLK_PWM>;
- clock-names = "timers";
- };
+ gsc_0: gsc@13e00000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e00000 0x1000>;
+ interrupts = <0 85 0>;
+ power-domains = <&pd_gsc>;
+ clocks = <&clock CLK_GSCL0>;
+ clock-names = "gscl";
+ iommu = <&sysmmu_gsc0>;
+ };
- amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- pdma0: pdma@121A0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x121A0000 0x1000>;
- interrupts = <0 34 0>;
- clocks = <&clock CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- pdma1: pdma@121B0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x121B0000 0x1000>;
- interrupts = <0 35 0>;
- clocks = <&clock CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- mdma0: mdma@10800000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x10800000 0x1000>;
- interrupts = <0 33 0>;
- clocks = <&clock CLK_MDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
- };
-
- mdma1: mdma@11C10000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x11C10000 0x1000>;
- interrupts = <0 124 0>;
- clocks = <&clock CLK_MDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
+ gsc_1: gsc@13e10000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e10000 0x1000>;
+ interrupts = <0 86 0>;
+ power-domains = <&pd_gsc>;
+ clocks = <&clock CLK_GSCL1>;
+ clock-names = "gscl";
+ iommu = <&sysmmu_gsc1>;
};
- };
- gsc_0: gsc@13e00000 {
- compatible = "samsung,exynos5-gsc";
- reg = <0x13e00000 0x1000>;
- interrupts = <0 85 0>;
- power-domains = <&pd_gsc>;
- clocks = <&clock CLK_GSCL0>;
- clock-names = "gscl";
- iommu = <&sysmmu_gsc0>;
- };
+ gsc_2: gsc@13e20000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e20000 0x1000>;
+ interrupts = <0 87 0>;
+ power-domains = <&pd_gsc>;
+ clocks = <&clock CLK_GSCL2>;
+ clock-names = "gscl";
+ iommu = <&sysmmu_gsc2>;
+ };
- gsc_1: gsc@13e10000 {
- compatible = "samsung,exynos5-gsc";
- reg = <0x13e10000 0x1000>;
- interrupts = <0 86 0>;
- power-domains = <&pd_gsc>;
- clocks = <&clock CLK_GSCL1>;
- clock-names = "gscl";
- iommu = <&sysmmu_gsc1>;
- };
+ gsc_3: gsc@13e30000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e30000 0x1000>;
+ interrupts = <0 88 0>;
+ power-domains = <&pd_gsc>;
+ clocks = <&clock CLK_GSCL3>;
+ clock-names = "gscl";
+ iommu = <&sysmmu_gsc3>;
+ };
- gsc_2: gsc@13e20000 {
- compatible = "samsung,exynos5-gsc";
- reg = <0x13e20000 0x1000>;
- interrupts = <0 87 0>;
- power-domains = <&pd_gsc>;
- clocks = <&clock CLK_GSCL2>;
- clock-names = "gscl";
- iommu = <&sysmmu_gsc2>;
- };
+ hdmi: hdmi@14530000 {
+ compatible = "samsung,exynos4212-hdmi";
+ reg = <0x14530000 0x70000>;
+ power-domains = <&pd_disp1>;
+ interrupts = <0 95 0>;
+ clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+ <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+ <&clock CLK_MOUT_HDMI>;
+ clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+ "sclk_hdmiphy", "mout_hdmi";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ };
- gsc_3: gsc@13e30000 {
- compatible = "samsung,exynos5-gsc";
- reg = <0x13e30000 0x1000>;
- interrupts = <0 88 0>;
- power-domains = <&pd_gsc>;
- clocks = <&clock CLK_GSCL3>;
- clock-names = "gscl";
- iommu = <&sysmmu_gsc3>;
- };
+ mixer@14450000 {
+ compatible = "samsung,exynos5250-mixer";
+ reg = <0x14450000 0x10000>;
+ power-domains = <&pd_disp1>;
+ interrupts = <0 94 0>;
+ clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+ <&clock CLK_SCLK_HDMI>;
+ clock-names = "mixer", "hdmi", "sclk_hdmi";
+ iommus = <&sysmmu_tv>;
+ };
- hdmi: hdmi@14530000 {
- compatible = "samsung,exynos4212-hdmi";
- reg = <0x14530000 0x70000>;
- power-domains = <&pd_disp1>;
- interrupts = <0 95 0>;
- clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
- <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
- <&clock CLK_MOUT_HDMI>;
- clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
- "sclk_hdmiphy", "mout_hdmi";
- samsung,syscon-phandle = <&pmu_system_controller>;
- };
+ dp_phy: video-phy {
+ compatible = "samsung,exynos5250-dp-video-phy";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <0>;
+ };
- mixer@14450000 {
- compatible = "samsung,exynos5250-mixer";
- reg = <0x14450000 0x10000>;
- power-domains = <&pd_disp1>;
- interrupts = <0 94 0>;
- clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
- <&clock CLK_SCLK_HDMI>;
- clock-names = "mixer", "hdmi", "sclk_hdmi";
- iommus = <&sysmmu_tv>;
- };
+ adc: adc@12D10000 {
+ compatible = "samsung,exynos-adc-v1";
+ reg = <0x12D10000 0x100>;
+ interrupts = <0 106 0>;
+ clocks = <&clock CLK_ADC>;
+ clock-names = "adc";
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ status = "disabled";
+ };
- dp_phy: video-phy {
- compatible = "samsung,exynos5250-dp-video-phy";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <0>;
- };
+ sss@10830000 {
+ compatible = "samsung,exynos4210-secss";
+ reg = <0x10830000 0x300>;
+ interrupts = <0 112 0>;
+ clocks = <&clock CLK_SSS>;
+ clock-names = "secss";
+ };
- adc: adc@12D10000 {
- compatible = "samsung,exynos-adc-v1";
- reg = <0x12D10000 0x100>;
- interrupts = <0 106 0>;
- clocks = <&clock CLK_ADC>;
- clock-names = "adc";
- #io-channel-cells = <1>;
- io-channel-ranges;
- samsung,syscon-phandle = <&pmu_system_controller>;
- status = "disabled";
- };
+ sysmmu_g2d: sysmmu@10A60000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x10A60000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <24 5>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
+ #iommu-cells = <0>;
+ };
- sss@10830000 {
- compatible = "samsung,exynos4210-secss";
- reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
- clocks = <&clock CLK_SSS>;
- clock-names = "secss";
- };
+ sysmmu_mfc_r: sysmmu@11200000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11200000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <6 2>;
+ power-domains = <&pd_mfc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+ #iommu-cells = <0>;
+ };
- sysmmu_g2d: sysmmu@10A60000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x10A60000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <24 5>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
- #iommu-cells = <0>;
- };
+ sysmmu_mfc_l: sysmmu@11210000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11210000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <8 5>;
+ power-domains = <&pd_mfc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+ #iommu-cells = <0>;
+ };
- sysmmu_mfc_r: sysmmu@11200000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x11200000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <6 2>;
- power-domains = <&pd_mfc>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
- #iommu-cells = <0>;
- };
+ sysmmu_rotator: sysmmu@11D40000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11D40000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+ #iommu-cells = <0>;
+ };
- sysmmu_mfc_l: sysmmu@11210000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x11210000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <8 5>;
- power-domains = <&pd_mfc>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
- #iommu-cells = <0>;
- };
+ sysmmu_jpeg: sysmmu@11F20000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11F20000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 2>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+ #iommu-cells = <0>;
+ };
- sysmmu_rotator: sysmmu@11D40000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x11D40000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <4 0>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_isp: sysmmu@13260000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13260000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <10 6>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_ISP>;
+ #iommu-cells = <0>;
+ };
- sysmmu_jpeg: sysmmu@11F20000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x11F20000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <4 2>;
- power-domains = <&pd_gsc>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_drc: sysmmu@13270000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13270000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <11 6>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_DRC>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_isp: sysmmu@13260000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13260000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <10 6>;
- clock-names = "sysmmu";
- clocks = <&clock CLK_SMMU_FIMC_ISP>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_fd: sysmmu@132A0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132A0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 0>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_FD>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_drc: sysmmu@13270000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13270000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <11 6>;
- clock-names = "sysmmu";
- clocks = <&clock CLK_SMMU_FIMC_DRC>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_scc: sysmmu@13280000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13280000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 2>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_SCC>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_fd: sysmmu@132A0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x132A0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <5 0>;
- clock-names = "sysmmu";
- clocks = <&clock CLK_SMMU_FIMC_FD>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_scp: sysmmu@13290000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13290000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <3 6>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_SCP>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_scc: sysmmu@13280000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13280000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <5 2>;
- clock-names = "sysmmu";
- clocks = <&clock CLK_SMMU_FIMC_SCC>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_mcuctl: sysmmu@132B0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132B0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 4>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_MCU>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_scp: sysmmu@13290000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13290000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <3 6>;
- clock-names = "sysmmu";
- clocks = <&clock CLK_SMMU_FIMC_SCP>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_odc: sysmmu@132C0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132C0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <11 0>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_ODC>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_mcuctl: sysmmu@132B0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x132B0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <5 4>;
- clock-names = "sysmmu";
- clocks = <&clock CLK_SMMU_FIMC_MCU>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_dis0: sysmmu@132D0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132D0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <10 4>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_DIS0>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_odc: sysmmu@132C0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x132C0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <11 0>;
- clock-names = "sysmmu";
- clocks = <&clock CLK_SMMU_FIMC_ODC>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_dis1: sysmmu@132E0000{
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132E0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <9 4>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_DIS1>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_dis0: sysmmu@132D0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x132D0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <10 4>;
- clock-names = "sysmmu";
- clocks = <&clock CLK_SMMU_FIMC_DIS0>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_3dnr: sysmmu@132F0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x132F0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <5 6>;
+ clock-names = "sysmmu";
+ clocks = <&clock CLK_SMMU_FIMC_3DNR>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_dis1: sysmmu@132E0000{
- compatible = "samsung,exynos-sysmmu";
- reg = <0x132E0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <9 4>;
- clock-names = "sysmmu";
- clocks = <&clock CLK_SMMU_FIMC_DIS1>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_lite0: sysmmu@13C40000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13C40000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <3 4>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_3dnr: sysmmu@132F0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x132F0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <5 6>;
- clock-names = "sysmmu";
- clocks = <&clock CLK_SMMU_FIMC_3DNR>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimc_lite1: sysmmu@13C50000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13C50000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <24 1>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_lite0: sysmmu@13C40000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13C40000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <3 4>;
- power-domains = <&pd_gsc>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
- #iommu-cells = <0>;
- };
+ sysmmu_gsc0: sysmmu@13E80000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13E80000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 0>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+ #iommu-cells = <0>;
+ };
- sysmmu_fimc_lite1: sysmmu@13C50000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13C50000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <24 1>;
- power-domains = <&pd_gsc>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
- #iommu-cells = <0>;
- };
+ sysmmu_gsc1: sysmmu@13E90000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13E90000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 2>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+ #iommu-cells = <0>;
+ };
- sysmmu_gsc0: sysmmu@13E80000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13E80000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <2 0>;
- power-domains = <&pd_gsc>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
- #iommu-cells = <0>;
- };
+ sysmmu_gsc2: sysmmu@13EA0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13EA0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 4>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
+ #iommu-cells = <0>;
+ };
- sysmmu_gsc1: sysmmu@13E90000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13E90000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <2 2>;
- power-domains = <&pd_gsc>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
- #iommu-cells = <0>;
- };
+ sysmmu_gsc3: sysmmu@13EB0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13EB0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 6>;
+ power-domains = <&pd_gsc>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
+ #iommu-cells = <0>;
+ };
- sysmmu_gsc2: sysmmu@13EA0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13EA0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <2 4>;
- power-domains = <&pd_gsc>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
- #iommu-cells = <0>;
- };
+ sysmmu_fimd1: sysmmu@14640000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x14640000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <3 2>;
+ power-domains = <&pd_disp1>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+ #iommu-cells = <0>;
+ };
- sysmmu_gsc3: sysmmu@13EB0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13EB0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <2 6>;
- power-domains = <&pd_gsc>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
- #iommu-cells = <0>;
+ sysmmu_tv: sysmmu@14650000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x14650000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <7 4>;
+ power-domains = <&pd_disp1>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+ #iommu-cells = <0>;
+ };
};
- sysmmu_fimd1: sysmmu@14640000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x14640000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <3 2>;
- power-domains = <&pd_disp1>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
- #iommu-cells = <0>;
- };
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tmu 0>;
- sysmmu_tv: sysmmu@14650000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x14650000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <7 4>;
- power-domains = <&pd_disp1>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
- #iommu-cells = <0>;
+ cooling-maps {
+ map0 {
+ /* Corresponds to 800MHz at freq_table */
+ cooling-device = <&cpu0 9 9>;
+ };
+ map1 {
+ /* Corresponds to 200MHz at freq_table */
+ cooling-device = <&cpu0 15 15>;
+ };
+ };
+ };
};
};
iommus = <&sysmmu_fimd1>;
};
+&i2c_0 {
+ clocks = <&clock CLK_I2C0>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+ clocks = <&clock CLK_I2C1>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+ clocks = <&clock CLK_I2C2>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+ clocks = <&clock CLK_I2C3>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_bus>;
+};
+
+&pwm {
+ clocks = <&clock CLK_PWM>;
+ clock-names = "timers";
+};
+
&rtc {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
--- /dev/null
+/*
+ * Hardkernel Odroid XU board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos54xx-odroidxu-leds.dtsi"
+
+/ {
+ model = "Hardkernel Odroid XU";
+ compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
+
+ memory {
+ reg = <0x40000000 0x7ea00000>;
+ };
+
+ chosen {
+ linux,stdout-path = &serial_2;
+ };
+
+ emmc_pwrseq: pwrseq {
+ pinctrl-0 = <&emmc_nrst_pin>;
+ pinctrl-names = "default";
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
+ };
+
+ fan0: pwm-fan {
+ compatible = "pwm-fan";
+ pwms = <&pwm 0 20972 0>;
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ cooling-levels = <0 130 170 230>;
+ };
+
+ fin_pll: xxti {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
+
+ firmware@02073000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x02073000 0x1000>;
+ };
+};
+
+&cpu0_thermal {
+ thermal-sensors = <&tmu_cpu0 0>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+
+ trips {
+ cpu_alert0: cpu-alert-0 {
+ temperature = <50000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_alert1: cpu-alert-1 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_alert2: cpu-alert-2 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map2 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ };
+};
+
+&hsi2c_4 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <400000>;
+ status = "okay";
+
+ usb3503: usb-hub@08 {
+ compatible = "smsc,usb3503";
+ reg = <0x08>;
+
+ intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+ connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpx1 4 GPIO_ACTIVE_HIGH>;
+ initial-mode = <1>;
+
+ clock-names = "refclk";
+ clocks = <&pmu_system_controller 0>;
+ refclk-frequency = <24000000>;
+ };
+
+ max77802: pmic@09 {
+ compatible = "maxim,max77802";
+ reg = <0x9>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>,
+ <&pmic_dvs_3>;
+ #clock-cells = <1>;
+
+ inl1-supply = <&buck5_reg>;
+ inl2-supply = <&buck7_reg>;
+ inl3-supply = <&buck9_reg>;
+ inl4-supply = <&buck9_reg>;
+ inl5-supply = <&buck9_reg>;
+ inl6-supply = <&buck10_reg>;
+ inl7-supply = <&buck9_reg>;
+ /* inl9 supply is BOOST, not configured here */
+ inl10-supply = <&buck7_reg>;
+
+ regulators {
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_mem";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "buck7";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ /* vdd_mmc0 */
+ regulator-name = "vddf_2v85";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "buck9";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "buck10";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_alive";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "vddq_m1_m2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vddq_gpio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "vddq_mmc2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ /* Having it off prevents reboot */
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd18_hsic";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd18_bpll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vddq_lcd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd10_hdmi";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "ldo9";
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd18_mipi";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vddq_mmc01";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ /*
+ * Having it off prevents accessing MMC after
+ * reboot with error:
+ * MMC Device 1: Clock OFF has been failed.
+ */
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd33_usb3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vddq_abbg0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "vddq_abbg1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd10_usb3";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "ldo16";
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "cam_sensor_core";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "ldo18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "ldo19";
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "vdd_mmc0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo21_reg: LDO21 {
+ /* vdd_mmc2 */
+ regulator-name = "vddf_2v8";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "ldo22";
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "dp_p3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "cam_af";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "eth_p3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "usb30_extclk";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo27_reg: LDO27 {
+ regulator-name = "ldo27";
+ };
+
+ ldo28_reg: LDO28 {
+ regulator-name = "ldo28";
+ };
+
+ ldo29_reg: LDO29 {
+ regulator-name = "ldo29";
+ };
+
+ ldo30_reg: LDO30 {
+ regulator-name = "vddq_e1_e2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo31_reg: LDO31 {
+ regulator-name = "ldo31";
+ };
+
+ /* On revisions with ti,ina231 this is sensor VS */
+ ldo32_reg: LDO32 {
+ regulator-name = "vs_power_meter";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo33_reg: LDO33 {
+ regulator-name = "ldo33";
+ };
+
+ ldo34_reg: LDO34 {
+ regulator-name = "ldo34";
+ };
+
+ ldo35_reg: LDO35 {
+ regulator-name = "ldo35";
+ };
+ };
+ };
+};
+
+&mmc_0 {
+ status = "okay";
+ mmc-pwrseq = <&emmc_pwrseq>;
+ cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ samsung,dw-mshc-hs400-timing = <0 2>;
+ samsung,read-strobe-delay = <90>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ mmc-hs400-1_8v;
+ vmmc-supply = <&ldo20_reg>;
+ vqmmc-supply = <&ldo11_reg>;
+};
+
+&mmc_2 {
+ status = "okay";
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ vmmc-supply = <&ldo21_reg>;
+ vqmmc-supply = <&ldo4_reg>;
+};
+
+&pinctrl_0 {
+ emmc_nrst_pin: emmc-nrst {
+ samsung,pins = "gpd1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pmic_dvs_3: pmic-dvs-3 {
+ samsung,pins = "gpx0-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pmic_dvs_2: pmic-dvs-2 {
+ samsung,pins = "gpx0-1";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pmic_dvs_1: pmic-dvs-1 {
+ samsung,pins = "gpx0-2";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ samsung,pin-val = <1>;
+ };
+
+ max77802_irq: max77802-irq {
+ samsung,pins = "gpx0-4";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pwm {
+ /*
+ * PWM 0 -- fan
+ * PWM 1 -- Green LED
+ * PWM 2 -- Blue LED
+ * PWM 3 -- on MIPI connector for backlight
+ */
+ pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&serial_0 {
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&serial_2 {
+ status = "okay";
+};
+
+&serial_3 {
+ status = "okay";
+};
+
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "host";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+ vdd33-supply = <&ldo12_reg>;
+ vdd10-supply = <&ldo15_reg>;
+};
+
+&usbdrd3_1 {
+ vdd33-supply = <&ldo12_reg>;
+ vdd10-supply = <&ldo15_reg>;
+};
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpa0-4", "gpa0-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_fctl: uart2-fctl {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c3_bus: i2c3-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gpa1-4", "gpa1-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_hs_bus: i2c4-hs-bus {
+ samsung,pins = "gpa2-0", "gpa2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c5_hs_bus: i2c5-hs-bus {
+ samsung,pins = "gpa2-2", "gpa2-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c6_hs_bus: i2c6-hs-bus {
+ samsung,pins = "gpb1-3", "gpb1-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpb2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpb2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpb2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpb2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c7_hs_bus: i2c7-hs-bus {
+ samsung,pins = "gpb2-2", "gpb2-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpb3-0", "gpb3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ samsung,pins = "gpb3-2", "gpb3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpc0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpc2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpc2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpc2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpc2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
};
&pinctrl_1 {
};
};
-&uart0 {
+&serial_0 {
status = "okay";
};
-&uart1 {
+&serial_1 {
status = "okay";
};
-&uart2 {
+&serial_2 {
status = "okay";
};
* published by the Free Software Foundation.
*/
-#include "skeleton.dtsi"
+#include "exynos54xx.dtsi"
#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos5410.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "samsung,exynos5410", "samsung,exynos5";
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
pinctrl3 = &pinctrl_3;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- CPU0: cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x0>;
clock-frequency = <1600000000>;
};
- CPU1: cpu@1 {
+ cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
clock-frequency = <1600000000>;
};
- CPU2: cpu@2 {
+ cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x2>;
clock-frequency = <1600000000>;
};
- CPU3: cpu@3 {
+ cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x3>;
#size-cells = <1>;
ranges;
- combiner: interrupt-controller@10440000 {
- compatible = "samsung,exynos4210-combiner";
- #interrupt-cells = <2>;
- interrupt-controller;
- samsung,combiner-nr = <32>;
- reg = <0x10440000 0x1000>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
- <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
- };
-
- gic: interrupt-controller@10481000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x10481000 0x1000>,
- <0x10482000 0x1000>,
- <0x10484000 0x2000>,
- <0x10486000 0x2000>;
- interrupts = <1 9 0xf04>;
- };
-
- chipid@10000000 {
- compatible = "samsung,exynos4210-chipid";
- reg = <0x10000000 0x100>;
- };
-
- sromc: memory-controller@12250000 {
- compatible = "samsung,exynos4210-srom";
- reg = <0x12250000 0x14>;
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0x04000000 0x20000
- 1 0 0x05000000 0x20000
- 2 0 0x06000000 0x20000
- 3 0 0x07000000 0x20000>;
- };
-
pmu_system_controller: system-controller@10040000 {
compatible = "samsung,exynos5410-pmu", "syscon";
reg = <0x10040000 0x5000>;
+ clock-names = "clkout16";
+ clocks = <&fin_pll>;
+ #clock-cells = <1>;
};
- mct: mct@101C0000 {
- compatible = "samsung,exynos4210-mct";
- reg = <0x101C0000 0xB00>;
- interrupt-parent = <&interrupt_map>;
- interrupts = <0>, <1>, <2>, <3>,
- <4>, <5>, <6>, <7>,
- <8>, <9>, <10>, <11>;
- clocks = <&fin_pll>, <&clock CLK_MCT>;
- clock-names = "fin_pll", "mct";
-
- interrupt_map: interrupt-map {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = <0 &combiner 23 3>,
- <1 &combiner 23 4>,
- <2 &combiner 25 2>,
- <3 &combiner 25 3>,
- <4 &gic 0 120 0>,
- <5 &gic 0 121 0>,
- <6 &gic 0 122 0>,
- <7 &gic 0 123 0>,
- <8 &gic 0 128 0>,
- <9 &gic 0 129 0>,
- <10 &gic 0 130 0>,
- <11 &gic 0 131 0>;
- };
+ clock: clock-controller@10010000 {
+ compatible = "samsung,exynos5410-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
};
- sysram@02020000 {
- compatible = "mmio-sram";
- reg = <0x02020000 0x54000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x02020000 0x54000>;
+ tmu_cpu0: tmu@10060000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x10060000 0x100>;
+ interrupts = <GIC_SPI 65 0>;
+ clocks = <&clock CLK_TMU>;
+ clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
- smp-sysram@0 {
- compatible = "samsung,exynos4210-sysram";
- reg = <0x0 0x1000>;
- };
+ tmu_cpu1: tmu@10064000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x10064000 0x100>;
+ interrupts = <GIC_SPI 183 0>;
+ clocks = <&clock CLK_TMU>;
+ clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
- smp-sysram@53000 {
- compatible = "samsung,exynos4210-sysram-ns";
- reg = <0x53000 0x1000>;
- };
+ tmu_cpu2: tmu@10068000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x10068000 0x100>;
+ interrupts = <GIC_SPI 184 0>;
+ clocks = <&clock CLK_TMU>;
+ clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
};
- clock: clock-controller@10010000 {
- compatible = "samsung,exynos5410-clock";
- reg = <0x10010000 0x30000>;
- #clock-cells = <1>;
+ tmu_cpu3: tmu@1006c000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x1006c000 0x100>;
+ interrupts = <GIC_SPI 185 0>;
+ clocks = <&clock CLK_TMU>;
+ clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
};
mmc_0: mmc@12200000 {
reg = <0x03860000 0x1000>;
interrupts = <0 47 0>;
};
+ };
- uart0: serial@12C00000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C00000 0x100>;
- interrupts = <0 51 0>;
- clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ thermal-sensors = <&tmu_cpu0>;
+ #include "exynos5420-trip-points.dtsi"
};
-
- uart1: serial@12C10000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C10000 0x100>;
- interrupts = <0 52 0>;
- clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
+ cpu1_thermal: cpu1-thermal {
+ thermal-sensors = <&tmu_cpu1>;
+ #include "exynos5420-trip-points.dtsi"
};
-
- uart2: serial@12C20000 {
- compatible = "samsung,exynos4210-uart";
- reg = <0x12C20000 0x100>;
- interrupts = <0 53 0>;
- clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
- clock-names = "uart", "clk_uart_baud0";
- status = "disabled";
+ cpu2_thermal: cpu2-thermal {
+ thermal-sensors = <&tmu_cpu2>;
+ #include "exynos5420-trip-points.dtsi"
+ };
+ cpu3_thermal: cpu3-thermal {
+ thermal-sensors = <&tmu_cpu3>;
+ #include "exynos5420-trip-points.dtsi"
};
};
};
+&i2c_0 {
+ clocks = <&clock CLK_I2C0>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+ clocks = <&clock CLK_I2C1>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+ clocks = <&clock CLK_I2C2>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+ clocks = <&clock CLK_I2C3>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+ clocks = <&clock CLK_USI0>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+ clocks = <&clock CLK_USI1>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+ clocks = <&clock CLK_USI2>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+ clocks = <&clock CLK_USI3>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_hs_bus>;
+};
+
+&mct {
+ clocks = <&fin_pll>, <&clock CLK_MCT>;
+ clock-names = "fin_pll", "mct";
+};
+
+&pwm {
+ clocks = <&clock CLK_PWM>;
+ clock-names = "timers";
+};
+
+&rtc {
+ clocks = <&clock CLK_RTC>;
+ clock-names = "rtc";
+ interrupt-parent = <&pmu_system_controller>;
+ status = "disabled";
+};
+
+&serial_0 {
+ clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_1 {
+ clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_2 {
+ clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&serial_3 {
+ clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
+};
+
+&sss {
+ clocks = <&clock CLK_SSS>;
+ clock-names = "secss";
+};
+
+&sromc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x04000000 0x20000
+ 1 0 0x05000000 0x20000
+ 2 0 0x06000000 0x20000
+ 3 0 0x07000000 0x20000>;
+};
+
+&usbdrd3_0 {
+ clocks = <&clock CLK_USBD300>;
+ clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+ clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+ clocks = <&clock CLK_USBD301>;
+ clock-names = "usbdrd30";
+};
+
+&usbdrd_dwc3_1 {
+ interrupts = <GIC_SPI 200 0>;
+};
+
+&usbdrd_phy1 {
+ clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+ clocks = <&clock CLK_USBH20>;
+ clock-names = "usbhost";
+};
+
+&usbhost2 {
+ clocks = <&clock CLK_USBH20>;
+ clock-names = "usbhost";
+};
+
+&usb2_phy {
+ clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
+&watchdog {
+ clocks = <&clock CLK_WDT>;
+ clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
#include "exynos5410-pinctrl.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
};
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
-};
-
&mmc_0 {
status = "okay";
broken-cd;
#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5420.dtsi"
#include "exynos5420-cpus.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Peach Pit Rev 6+";
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
- regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
- regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_ldo9";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-mode = <MAX77802_OPMODE_LP>;
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
status = "okay";
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
-};
-
&mmc_0 {
status = "okay";
num-slots = <1>;
status = "okay";
};
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo10_reg>;
+};
+
&usbdrd_dwc3_0 {
dr_mode = "host";
};
samsung,pin-drv = <3>;
};
- sd1_clk: sd1-clk {
- samsung,pins = "gpc1-0";
+ sd0_rclk: sd0-rclk {
+ samsung,pins = "gpc0-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
+ samsung,pin-pud = <1>;
samsung,pin-drv = <3>;
};
- sd0_rclk: sd0-rclk {
- samsung,pins = "gpc0-7";
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpc1-0";
samsung,pin-function = <2>;
- samsung,pin-pud = <1>;
+ samsung,pin-pud = <0>;
samsung,pin-drv = <3>;
};
#include "exynos5420.dtsi"
#include "exynos5420-cpus.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Samsung SMDK5420 board based on EXYNOS5420";
};
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
-};
-
&mmc_0 {
status = "okay";
broken-cd;
* published by the Free Software Foundation.
*/
+#include "exynos54xx.dtsi"
#include <dt-bindings/clock/exynos5420.h>
-#include "exynos5.dtsi"
-
#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "samsung,exynos5420", "samsung,exynos5";
pinctrl2 = &pinctrl_2;
pinctrl3 = &pinctrl_3;
pinctrl4 = &pinctrl_4;
- i2c0 = &i2c_0;
- i2c1 = &i2c_1;
- i2c2 = &i2c_2;
- i2c3 = &i2c_3;
- i2c4 = &hsi2c_4;
- i2c5 = &hsi2c_5;
- i2c6 = &hsi2c_6;
- i2c7 = &hsi2c_7;
i2c8 = &hsi2c_8;
i2c9 = &hsi2c_9;
i2c10 = &hsi2c_10;
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
- usbdrdphy0 = &usbdrd_phy0;
- usbdrdphy1 = &usbdrd_phy1;
- };
-
- cluster_a15_opp_table: opp_table0 {
- compatible = "operating-points-v2";
- opp-shared;
- opp@1800000000 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1250000>;
- clock-latency-ns = <140000>;
- };
- opp@1700000000 {
- opp-hz = /bits/ 64 <1700000000>;
- opp-microvolt = <1212500>;
- clock-latency-ns = <140000>;
- };
- opp@1600000000 {
- opp-hz = /bits/ 64 <1600000000>;
- opp-microvolt = <1175000>;
- clock-latency-ns = <140000>;
- };
- opp@1500000000 {
- opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <1137500>;
- clock-latency-ns = <140000>;
- };
- opp@1400000000 {
- opp-hz = /bits/ 64 <1400000000>;
- opp-microvolt = <1112500>;
- clock-latency-ns = <140000>;
- };
- opp@1300000000 {
- opp-hz = /bits/ 64 <1300000000>;
- opp-microvolt = <1062500>;
- clock-latency-ns = <140000>;
- };
- opp@1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1037500>;
- clock-latency-ns = <140000>;
- };
- opp@1100000000 {
- opp-hz = /bits/ 64 <1100000000>;
- opp-microvolt = <1012500>;
- clock-latency-ns = <140000>;
- };
- opp@1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = < 987500>;
- clock-latency-ns = <140000>;
- };
- opp@900000000 {
- opp-hz = /bits/ 64 <900000000>;
- opp-microvolt = < 962500>;
- clock-latency-ns = <140000>;
- };
- opp@800000000 {
- opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = < 937500>;
- clock-latency-ns = <140000>;
- };
- opp@700000000 {
- opp-hz = /bits/ 64 <700000000>;
- opp-microvolt = < 912500>;
- clock-latency-ns = <140000>;
- };
- };
-
- cluster_a7_opp_table: opp_table1 {
- compatible = "operating-points-v2";
- opp-shared;
- opp@1300000000 {
- opp-hz = /bits/ 64 <1300000000>;
- opp-microvolt = <1275000>;
- clock-latency-ns = <140000>;
- };
- opp@1200000000 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1212500>;
- clock-latency-ns = <140000>;
- };
- opp@1100000000 {
- opp-hz = /bits/ 64 <1100000000>;
- opp-microvolt = <1162500>;
- clock-latency-ns = <140000>;
- };
- opp@1000000000 {
- opp-hz = /bits/ 64 <1000000000>;
- opp-microvolt = <1112500>;
- clock-latency-ns = <140000>;
- };
- opp@900000000 {
- opp-hz = /bits/ 64 <900000000>;
- opp-microvolt = <1062500>;
- clock-latency-ns = <140000>;
- };
- opp@800000000 {
- opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = <1025000>;
- clock-latency-ns = <140000>;
- };
- opp@700000000 {
- opp-hz = /bits/ 64 <700000000>;
- opp-microvolt = <975000>;
- clock-latency-ns = <140000>;
- };
- opp@600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <937500>;
- clock-latency-ns = <140000>;
- };
};
/*
* by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
*/
- cci: cci@10d20000 {
- compatible = "arm,cci-400";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x10d20000 0x1000>;
- ranges = <0x0 0x10d20000 0x6000>;
-
- cci_control0: slave-if@4000 {
- compatible = "arm,cci-400-ctrl-if";
- interface-type = "ace";
- reg = <0x4000 0x1000>;
- };
- cci_control1: slave-if@5000 {
- compatible = "arm,cci-400-ctrl-if";
- interface-type = "ace";
- reg = <0x5000 0x1000>;
+ soc: soc {
+ cluster_a15_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp@1800000000 {
+ opp-hz = /bits/ 64 <1800000000>;
+ opp-microvolt = <1250000>;
+ clock-latency-ns = <140000>;
+ };
+ opp@1700000000 {
+ opp-hz = /bits/ 64 <1700000000>;
+ opp-microvolt = <1212500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@1600000000 {
+ opp-hz = /bits/ 64 <1600000000>;
+ opp-microvolt = <1175000>;
+ clock-latency-ns = <140000>;
+ };
+ opp@1500000000 {
+ opp-hz = /bits/ 64 <1500000000>;
+ opp-microvolt = <1137500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt = <1112500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1062500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1037500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1012500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = < 987500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = < 962500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = < 937500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = < 912500>;
+ clock-latency-ns = <140000>;
+ };
+ };
+
+ cluster_a7_opp_table: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+ opp@1300000000 {
+ opp-hz = /bits/ 64 <1300000000>;
+ opp-microvolt = <1275000>;
+ clock-latency-ns = <140000>;
+ };
+ opp@1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1212500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@1100000000 {
+ opp-hz = /bits/ 64 <1100000000>;
+ opp-microvolt = <1162500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1112500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@900000000 {
+ opp-hz = /bits/ 64 <900000000>;
+ opp-microvolt = <1062500>;
+ clock-latency-ns = <140000>;
+ };
+ opp@800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1025000>;
+ clock-latency-ns = <140000>;
+ };
+ opp@700000000 {
+ opp-hz = /bits/ 64 <700000000>;
+ opp-microvolt = <975000>;
+ clock-latency-ns = <140000>;
+ };
+ opp@600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <937500>;
+ clock-latency-ns = <140000>;
+ };
+ };
+
+ cci: cci@10d20000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x10d20000 0x1000>;
+ ranges = <0x0 0x10d20000 0x6000>;
+
+ cci_control0: slave-if@4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+ cci_control1: slave-if@5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+ };
+
+ clock: clock-controller@10010000 {
+ compatible = "samsung,exynos5420-clock";
+ reg = <0x10010000 0x30000>;
+ #clock-cells = <1>;
+ };
+
+ clock_audss: audss-clock-controller@3810000 {
+ compatible = "samsung,exynos5420-audss-clock";
+ reg = <0x03810000 0x0C>;
+ #clock-cells = <1>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
+ <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
+ clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+ };
+
+ mfc: codec@11000000 {
+ compatible = "samsung,mfc-v7";
+ reg = <0x11000000 0x10000>;
+ interrupts = <0 96 0>;
+ clocks = <&clock CLK_MFC>;
+ clock-names = "mfc";
+ power-domains = <&mfc_pd>;
+ iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+ iommu-names = "left", "right";
+ };
+
+ mmc_0: mmc@12200000 {
+ compatible = "samsung,exynos5420-dw-mshc-smu";
+ interrupts = <0 75 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12200000 0x2000>;
+ clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
};
- };
-
- sysram@02020000 {
- compatible = "mmio-sram";
- reg = <0x02020000 0x54000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x02020000 0x54000>;
- smp-sysram@0 {
- compatible = "samsung,exynos4210-sysram";
- reg = <0x0 0x1000>;
+ mmc_1: mmc@12210000 {
+ compatible = "samsung,exynos5420-dw-mshc-smu";
+ interrupts = <0 76 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12210000 0x2000>;
+ clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
};
- smp-sysram@53000 {
- compatible = "samsung,exynos4210-sysram-ns";
- reg = <0x53000 0x1000>;
+ mmc_2: mmc@12220000 {
+ compatible = "samsung,exynos5420-dw-mshc";
+ interrupts = <0 77 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x12220000 0x1000>;
+ clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
};
- };
-
- clock: clock-controller@10010000 {
- compatible = "samsung,exynos5420-clock";
- reg = <0x10010000 0x30000>;
- #clock-cells = <1>;
- };
- clock_audss: audss-clock-controller@3810000 {
- compatible = "samsung,exynos5420-audss-clock";
- reg = <0x03810000 0x0C>;
- #clock-cells = <1>;
- clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
- <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
- clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
- };
-
- mfc: codec@11000000 {
- compatible = "samsung,mfc-v7";
- reg = <0x11000000 0x10000>;
- interrupts = <0 96 0>;
- clocks = <&clock CLK_MFC>;
- clock-names = "mfc";
- power-domains = <&mfc_pd>;
- iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
- iommu-names = "left", "right";
- };
+ nocp_mem0_0: nocp@10CA1000 {
+ compatible = "samsung,exynos5420-nocp";
+ reg = <0x10CA1000 0x200>;
+ status = "disabled";
+ };
- mmc_0: mmc@12200000 {
- compatible = "samsung,exynos5420-dw-mshc-smu";
- interrupts = <0 75 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x12200000 0x2000>;
- clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
- clock-names = "biu", "ciu";
- fifo-depth = <0x40>;
- status = "disabled";
- };
+ nocp_mem0_1: nocp@10CA1400 {
+ compatible = "samsung,exynos5420-nocp";
+ reg = <0x10CA1400 0x200>;
+ status = "disabled";
+ };
- mmc_1: mmc@12210000 {
- compatible = "samsung,exynos5420-dw-mshc-smu";
- interrupts = <0 76 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x12210000 0x2000>;
- clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
- clock-names = "biu", "ciu";
- fifo-depth = <0x40>;
- status = "disabled";
- };
+ nocp_mem1_0: nocp@10CA1800 {
+ compatible = "samsung,exynos5420-nocp";
+ reg = <0x10CA1800 0x200>;
+ status = "disabled";
+ };
- mmc_2: mmc@12220000 {
- compatible = "samsung,exynos5420-dw-mshc";
- interrupts = <0 77 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x12220000 0x1000>;
- clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
- clock-names = "biu", "ciu";
- fifo-depth = <0x40>;
- status = "disabled";
- };
+ nocp_mem1_1: nocp@10CA1C00 {
+ compatible = "samsung,exynos5420-nocp";
+ reg = <0x10CA1C00 0x200>;
+ status = "disabled";
+ };
- mct: mct@101C0000 {
- compatible = "samsung,exynos4210-mct";
- reg = <0x101C0000 0x800>;
- interrupt-controller;
- #interrupt-cells = <1>;
- interrupt-parent = <&mct_map>;
- interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
- <8>, <9>, <10>, <11>;
- clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
- clock-names = "fin_pll", "mct";
-
- mct_map: mct-map {
- #interrupt-cells = <1>;
- #address-cells = <0>;
- #size-cells = <0>;
- interrupt-map = <0 &combiner 23 3>,
- <1 &combiner 23 4>,
- <2 &combiner 25 2>,
- <3 &combiner 25 3>,
- <4 &gic 0 120 0>,
- <5 &gic 0 121 0>,
- <6 &gic 0 122 0>,
- <7 &gic 0 123 0>,
- <8 &gic 0 128 0>,
- <9 &gic 0 129 0>,
- <10 &gic 0 130 0>,
- <11 &gic 0 131 0>;
+ nocp_g3d_0: nocp@11A51000 {
+ compatible = "samsung,exynos5420-nocp";
+ reg = <0x11A51000 0x200>;
+ status = "disabled";
};
- };
- nocp_mem0_0: nocp@10CA1000 {
- compatible = "samsung,exynos5420-nocp";
- reg = <0x10CA1000 0x200>;
- status = "disabled";
- };
+ nocp_g3d_1: nocp@11A51400 {
+ compatible = "samsung,exynos5420-nocp";
+ reg = <0x11A51400 0x200>;
+ status = "disabled";
+ };
- nocp_mem0_1: nocp@10CA1400 {
- compatible = "samsung,exynos5420-nocp";
- reg = <0x10CA1400 0x200>;
- status = "disabled";
- };
+ gsc_pd: power-domain@10044000 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044000 0x20>;
+ #power-domain-cells = <0>;
+ clocks = <&clock CLK_FIN_PLL>,
+ <&clock CLK_MOUT_USER_ACLK300_GSCL>,
+ <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
+ clock-names = "oscclk", "clk0", "asb0", "asb1";
+ };
- nocp_mem1_0: nocp@10CA1800 {
- compatible = "samsung,exynos5420-nocp";
- reg = <0x10CA1800 0x200>;
- status = "disabled";
- };
+ isp_pd: power-domain@10044020 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044020 0x20>;
+ #power-domain-cells = <0>;
+ };
- nocp_mem1_1: nocp@10CA1C00 {
- compatible = "samsung,exynos5420-nocp";
- reg = <0x10CA1C00 0x200>;
- status = "disabled";
- };
+ mfc_pd: power-domain@10044060 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044060 0x20>;
+ clocks = <&clock CLK_FIN_PLL>,
+ <&clock CLK_MOUT_USER_ACLK333>,
+ <&clock CLK_ACLK333>;
+ clock-names = "oscclk", "clk0","asb0";
+ #power-domain-cells = <0>;
+ };
- nocp_g3d_0: nocp@11A51000 {
- compatible = "samsung,exynos5420-nocp";
- reg = <0x11A51000 0x200>;
- status = "disabled";
- };
+ msc_pd: power-domain@10044120 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044120 0x20>;
+ #power-domain-cells = <0>;
+ };
- nocp_g3d_1: nocp@11A51400 {
- compatible = "samsung,exynos5420-nocp";
- reg = <0x11A51400 0x200>;
- status = "disabled";
- };
+ disp_pd: power-domain@100440C0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x100440C0 0x20>;
+ #power-domain-cells = <0>;
+ clocks = <&clock CLK_FIN_PLL>,
+ <&clock CLK_MOUT_USER_ACLK200_DISP1>,
+ <&clock CLK_MOUT_USER_ACLK300_DISP1>,
+ <&clock CLK_MOUT_USER_ACLK400_DISP1>,
+ <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
+ clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
+ };
- gsc_pd: power-domain@10044000 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10044000 0x20>;
- #power-domain-cells = <0>;
- clocks = <&clock CLK_FIN_PLL>,
- <&clock CLK_MOUT_USER_ACLK300_GSCL>,
- <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
- clock-names = "oscclk", "clk0", "asb0", "asb1";
- };
+ pinctrl_0: pinctrl@13400000 {
+ compatible = "samsung,exynos5420-pinctrl";
+ reg = <0x13400000 0x1000>;
+ interrupts = <0 45 0>;
- isp_pd: power-domain@10044020 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10044020 0x20>;
- #power-domain-cells = <0>;
- };
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <0 32 0>;
+ };
+ };
- mfc_pd: power-domain@10044060 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10044060 0x20>;
- clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
- clock-names = "oscclk", "clk0";
- #power-domain-cells = <0>;
- };
+ pinctrl_1: pinctrl@13410000 {
+ compatible = "samsung,exynos5420-pinctrl";
+ reg = <0x13410000 0x1000>;
+ interrupts = <0 78 0>;
+ };
- msc_pd: power-domain@10044120 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10044120 0x20>;
- #power-domain-cells = <0>;
- };
+ pinctrl_2: pinctrl@14000000 {
+ compatible = "samsung,exynos5420-pinctrl";
+ reg = <0x14000000 0x1000>;
+ interrupts = <0 46 0>;
+ };
- disp_pd: power-domain@100440C0 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x100440C0 0x20>;
- #power-domain-cells = <0>;
- clocks = <&clock CLK_FIN_PLL>,
- <&clock CLK_MOUT_USER_ACLK200_DISP1>,
- <&clock CLK_MOUT_USER_ACLK300_DISP1>,
- <&clock CLK_MOUT_USER_ACLK400_DISP1>,
- <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
- clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
- };
+ pinctrl_3: pinctrl@14010000 {
+ compatible = "samsung,exynos5420-pinctrl";
+ reg = <0x14010000 0x1000>;
+ interrupts = <0 50 0>;
+ };
- pinctrl_0: pinctrl@13400000 {
- compatible = "samsung,exynos5420-pinctrl";
- reg = <0x13400000 0x1000>;
- interrupts = <0 45 0>;
+ pinctrl_4: pinctrl@03860000 {
+ compatible = "samsung,exynos5420-pinctrl";
+ reg = <0x03860000 0x1000>;
+ interrupts = <0 47 0>;
+ };
- wakeup-interrupt-controller {
- compatible = "samsung,exynos4210-wakeup-eint";
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ ranges;
+
+ adma: adma@03880000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x03880000 0x1000>;
+ interrupts = <0 110 0>;
+ clocks = <&clock_audss EXYNOS_ADMA>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <6>;
+ #dma-requests = <16>;
+ };
+
+ pdma0: pdma@121A0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121A0000 0x1000>;
+ interrupts = <0 34 0>;
+ clocks = <&clock CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@121B0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121B0000 0x1000>;
+ interrupts = <0 35 0>;
+ clocks = <&clock CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ mdma0: mdma@10800000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x10800000 0x1000>;
+ interrupts = <0 33 0>;
+ clocks = <&clock CLK_MDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
+ };
+
+ mdma1: mdma@11C10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x11C10000 0x1000>;
+ interrupts = <0 124 0>;
+ clocks = <&clock CLK_MDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
+ /*
+ * MDMA1 can support both secure and non-secure
+ * AXI transactions. When this is enabled in
+ * the kernel for boards that run in secure
+ * mode, we are getting imprecise external
+ * aborts causing the kernel to oops.
+ */
+ status = "disabled";
+ };
+ };
+
+ i2s0: i2s@03830000 {
+ compatible = "samsung,exynos5420-i2s";
+ reg = <0x03830000 0x100>;
+ dmas = <&adma 0
+ &adma 2
+ &adma 1>;
+ dma-names = "tx", "rx", "tx-sec";
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+ #clock-cells = <1>;
+ clock-output-names = "i2s_cdclk0";
+ #sound-dai-cells = <1>;
+ samsung,idma-addr = <0x03000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ status = "disabled";
};
- };
-
- pinctrl_1: pinctrl@13410000 {
- compatible = "samsung,exynos5420-pinctrl";
- reg = <0x13410000 0x1000>;
- interrupts = <0 78 0>;
- };
- pinctrl_2: pinctrl@14000000 {
- compatible = "samsung,exynos5420-pinctrl";
- reg = <0x14000000 0x1000>;
- interrupts = <0 46 0>;
- };
-
- pinctrl_3: pinctrl@14010000 {
- compatible = "samsung,exynos5420-pinctrl";
- reg = <0x14010000 0x1000>;
- interrupts = <0 50 0>;
- };
-
- pinctrl_4: pinctrl@03860000 {
- compatible = "samsung,exynos5420-pinctrl";
- reg = <0x03860000 0x1000>;
- interrupts = <0 47 0>;
- };
-
- amba {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&gic>;
- ranges;
-
- adma: adma@03880000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x03880000 0x1000>;
- interrupts = <0 110 0>;
- clocks = <&clock_audss EXYNOS_ADMA>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <6>;
- #dma-requests = <16>;
- };
-
- pdma0: pdma@121A0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x121A0000 0x1000>;
- interrupts = <0 34 0>;
- clocks = <&clock CLK_PDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- pdma1: pdma@121B0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x121B0000 0x1000>;
- interrupts = <0 35 0>;
- clocks = <&clock CLK_PDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <32>;
- };
-
- mdma0: mdma@10800000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x10800000 0x1000>;
- interrupts = <0 33 0>;
- clocks = <&clock CLK_MDMA0>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
- };
-
- mdma1: mdma@11C10000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x11C10000 0x1000>;
- interrupts = <0 124 0>;
- clocks = <&clock CLK_MDMA1>;
- clock-names = "apb_pclk";
- #dma-cells = <1>;
- #dma-channels = <8>;
- #dma-requests = <1>;
- /*
- * MDMA1 can support both secure and non-secure
- * AXI transactions. When this is enabled in the kernel
- * for boards that run in secure mode, we are getting
- * imprecise external aborts causing the kernel to oops.
- */
+ i2s1: i2s@12D60000 {
+ compatible = "samsung,exynos5420-i2s";
+ reg = <0x12D60000 0x100>;
+ dmas = <&pdma1 12
+ &pdma1 11>;
+ dma-names = "tx", "rx";
+ clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
+ clock-names = "iis", "i2s_opclk0";
+ #clock-cells = <1>;
+ clock-output-names = "i2s_cdclk1";
+ #sound-dai-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_bus>;
status = "disabled";
};
- };
-
- i2s0: i2s@03830000 {
- compatible = "samsung,exynos5420-i2s";
- reg = <0x03830000 0x100>;
- dmas = <&adma 0
- &adma 2
- &adma 1>;
- dma-names = "tx", "rx", "tx-sec";
- clocks = <&clock_audss EXYNOS_I2S_BUS>,
- <&clock_audss EXYNOS_I2S_BUS>,
- <&clock_audss EXYNOS_SCLK_I2S>;
- clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
- #clock-cells = <1>;
- clock-output-names = "i2s_cdclk0";
- #sound-dai-cells = <1>;
- samsung,idma-addr = <0x03000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s0_bus>;
- status = "disabled";
- };
-
- i2s1: i2s@12D60000 {
- compatible = "samsung,exynos5420-i2s";
- reg = <0x12D60000 0x100>;
- dmas = <&pdma1 12
- &pdma1 11>;
- dma-names = "tx", "rx";
- clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
- clock-names = "iis", "i2s_opclk0";
- #clock-cells = <1>;
- clock-output-names = "i2s_cdclk1";
- #sound-dai-cells = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s1_bus>;
- status = "disabled";
- };
-
- i2s2: i2s@12D70000 {
- compatible = "samsung,exynos5420-i2s";
- reg = <0x12D70000 0x100>;
- dmas = <&pdma0 12
- &pdma0 11>;
- dma-names = "tx", "rx";
- clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
- clock-names = "iis", "i2s_opclk0";
- #clock-cells = <1>;
- clock-output-names = "i2s_cdclk2";
- #sound-dai-cells = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s2_bus>;
- status = "disabled";
- };
-
- spi_0: spi@12d20000 {
- compatible = "samsung,exynos4210-spi";
- reg = <0x12d20000 0x100>;
- interrupts = <0 68 0>;
- dmas = <&pdma0 5
- &pdma0 4>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_bus>;
- clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
- clock-names = "spi", "spi_busclk0";
- status = "disabled";
- };
-
- spi_1: spi@12d30000 {
- compatible = "samsung,exynos4210-spi";
- reg = <0x12d30000 0x100>;
- interrupts = <0 69 0>;
- dmas = <&pdma1 5
- &pdma1 4>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_bus>;
- clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
- clock-names = "spi", "spi_busclk0";
- status = "disabled";
- };
-
- spi_2: spi@12d40000 {
- compatible = "samsung,exynos4210-spi";
- reg = <0x12d40000 0x100>;
- interrupts = <0 70 0>;
- dmas = <&pdma0 7
- &pdma0 6>;
- dma-names = "tx", "rx";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_bus>;
- clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
- clock-names = "spi", "spi_busclk0";
- status = "disabled";
- };
-
- pwm: pwm@12dd0000 {
- compatible = "samsung,exynos4210-pwm";
- reg = <0x12dd0000 0x100>;
- samsung,pwm-outputs = <0>, <1>, <2>, <3>;
- #pwm-cells = <3>;
- clocks = <&clock CLK_PWM>;
- clock-names = "timers";
- };
-
- dp_phy: dp-video-phy {
- compatible = "samsung,exynos5420-dp-video-phy";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <0>;
- };
-
- mipi_phy: mipi-video-phy {
- compatible = "samsung,s5pv210-mipi-video-phy";
- syscon = <&pmu_system_controller>;
- #phy-cells = <1>;
- };
-
- dsi@14500000 {
- compatible = "samsung,exynos5410-mipi-dsi";
- reg = <0x14500000 0x10000>;
- interrupts = <0 82 0>;
- phys = <&mipi_phy 1>;
- phy-names = "dsim";
- clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
- clock-names = "bus_clk", "pll_clk";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- adc: adc@12D10000 {
- compatible = "samsung,exynos-adc-v2";
- reg = <0x12D10000 0x100>;
- interrupts = <0 106 0>;
- clocks = <&clock CLK_TSADC>;
- clock-names = "adc";
- #io-channel-cells = <1>;
- io-channel-ranges;
- samsung,syscon-phandle = <&pmu_system_controller>;
- status = "disabled";
- };
-
- i2c_0: i2c@12C60000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12C60000 0x100>;
- interrupts = <0 56 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C0>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_bus>;
- samsung,sysreg-phandle = <&sysreg_system_controller>;
- status = "disabled";
- };
-
- i2c_1: i2c@12C70000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12C70000 0x100>;
- interrupts = <0 57 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C1>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_bus>;
- samsung,sysreg-phandle = <&sysreg_system_controller>;
- status = "disabled";
- };
-
- i2c_2: i2c@12C80000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12C80000 0x100>;
- interrupts = <0 58 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C2>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_bus>;
- samsung,sysreg-phandle = <&sysreg_system_controller>;
- status = "disabled";
- };
-
- i2c_3: i2c@12C90000 {
- compatible = "samsung,s3c2440-i2c";
- reg = <0x12C90000 0x100>;
- interrupts = <0 59 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clock CLK_I2C3>;
- clock-names = "i2c";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_bus>;
- samsung,sysreg-phandle = <&sysreg_system_controller>;
- status = "disabled";
- };
- hsi2c_4: i2c@12CA0000 {
- compatible = "samsung,exynos5-hsi2c";
- reg = <0x12CA0000 0x1000>;
- interrupts = <0 60 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_hs_bus>;
- clocks = <&clock CLK_USI0>;
- clock-names = "hsi2c";
- status = "disabled";
- };
-
- hsi2c_5: i2c@12CB0000 {
- compatible = "samsung,exynos5-hsi2c";
- reg = <0x12CB0000 0x1000>;
- interrupts = <0 61 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_hs_bus>;
- clocks = <&clock CLK_USI1>;
- clock-names = "hsi2c";
- status = "disabled";
- };
-
- hsi2c_6: i2c@12CC0000 {
- compatible = "samsung,exynos5-hsi2c";
- reg = <0x12CC0000 0x1000>;
- interrupts = <0 62 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_hs_bus>;
- clocks = <&clock CLK_USI2>;
- clock-names = "hsi2c";
- status = "disabled";
- };
-
- hsi2c_7: i2c@12CD0000 {
- compatible = "samsung,exynos5-hsi2c";
- reg = <0x12CD0000 0x1000>;
- interrupts = <0 63 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c7_hs_bus>;
- clocks = <&clock CLK_USI3>;
- clock-names = "hsi2c";
- status = "disabled";
- };
-
- hsi2c_8: i2c@12E00000 {
- compatible = "samsung,exynos5-hsi2c";
- reg = <0x12E00000 0x1000>;
- interrupts = <0 87 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c8_hs_bus>;
- clocks = <&clock CLK_USI4>;
- clock-names = "hsi2c";
- status = "disabled";
- };
-
- hsi2c_9: i2c@12E10000 {
- compatible = "samsung,exynos5-hsi2c";
- reg = <0x12E10000 0x1000>;
- interrupts = <0 88 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c9_hs_bus>;
- clocks = <&clock CLK_USI5>;
- clock-names = "hsi2c";
- status = "disabled";
- };
-
- hsi2c_10: i2c@12E20000 {
- compatible = "samsung,exynos5-hsi2c";
- reg = <0x12E20000 0x1000>;
- interrupts = <0 203 0>;
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c10_hs_bus>;
- clocks = <&clock CLK_USI6>;
- clock-names = "hsi2c";
- status = "disabled";
- };
-
- hdmi: hdmi@14530000 {
- compatible = "samsung,exynos5420-hdmi";
- reg = <0x14530000 0x70000>;
- interrupts = <0 95 0>;
- clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
- <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
- <&clock CLK_MOUT_HDMI>;
- clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
- "sclk_hdmiphy", "mout_hdmi";
- phy = <&hdmiphy>;
- samsung,syscon-phandle = <&pmu_system_controller>;
- status = "disabled";
- power-domains = <&disp_pd>;
- };
-
- hdmiphy: hdmiphy@145D0000 {
- reg = <0x145D0000 0x20>;
- };
-
- mixer: mixer@14450000 {
- compatible = "samsung,exynos5420-mixer";
- reg = <0x14450000 0x10000>;
- interrupts = <0 94 0>;
- clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
- <&clock CLK_SCLK_HDMI>;
- clock-names = "mixer", "hdmi", "sclk_hdmi";
- power-domains = <&disp_pd>;
- iommus = <&sysmmu_tv>;
- };
-
- rotator: rotator@11C00000 {
- compatible = "samsung,exynos5250-rotator";
- reg = <0x11C00000 0x64>;
- interrupts = <0 84 0>;
- clocks = <&clock CLK_ROTATOR>;
- clock-names = "rotator";
- iommus = <&sysmmu_rotator>;
- };
-
- gsc_0: video-scaler@13e00000 {
- compatible = "samsung,exynos5-gsc";
- reg = <0x13e00000 0x1000>;
- interrupts = <0 85 0>;
- clocks = <&clock CLK_GSCL0>;
- clock-names = "gscl";
- power-domains = <&gsc_pd>;
- iommus = <&sysmmu_gscl0>;
- };
-
- gsc_1: video-scaler@13e10000 {
- compatible = "samsung,exynos5-gsc";
- reg = <0x13e10000 0x1000>;
- interrupts = <0 86 0>;
- clocks = <&clock CLK_GSCL1>;
- clock-names = "gscl";
- power-domains = <&gsc_pd>;
- iommus = <&sysmmu_gscl1>;
- };
-
- jpeg_0: jpeg@11F50000 {
- compatible = "samsung,exynos5420-jpeg";
- reg = <0x11F50000 0x1000>;
- interrupts = <0 89 0>;
- clock-names = "jpeg";
- clocks = <&clock CLK_JPEG>;
- iommus = <&sysmmu_jpeg0>;
- };
-
- jpeg_1: jpeg@11F60000 {
- compatible = "samsung,exynos5420-jpeg";
- reg = <0x11F60000 0x1000>;
- interrupts = <0 168 0>;
- clock-names = "jpeg";
- clocks = <&clock CLK_JPEG2>;
- iommus = <&sysmmu_jpeg1>;
- };
-
- pmu_system_controller: system-controller@10040000 {
- compatible = "samsung,exynos5420-pmu", "syscon";
- reg = <0x10040000 0x5000>;
- clock-names = "clkout16";
- clocks = <&clock CLK_FIN_PLL>;
- #clock-cells = <1>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- };
-
- sysreg_system_controller: syscon@10050000 {
- compatible = "samsung,exynos5-sysreg", "syscon";
- reg = <0x10050000 0x5000>;
- };
-
- tmu_cpu0: tmu@10060000 {
- compatible = "samsung,exynos5420-tmu";
- reg = <0x10060000 0x100>;
- interrupts = <0 65 0>;
- clocks = <&clock CLK_TMU>;
- clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
- };
-
- tmu_cpu1: tmu@10064000 {
- compatible = "samsung,exynos5420-tmu";
- reg = <0x10064000 0x100>;
- interrupts = <0 183 0>;
- clocks = <&clock CLK_TMU>;
- clock-names = "tmu_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
- };
-
- tmu_cpu2: tmu@10068000 {
- compatible = "samsung,exynos5420-tmu-ext-triminfo";
- reg = <0x10068000 0x100>, <0x1006c000 0x4>;
- interrupts = <0 184 0>;
- clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
- clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
- };
-
- tmu_cpu3: tmu@1006c000 {
- compatible = "samsung,exynos5420-tmu-ext-triminfo";
- reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
- interrupts = <0 185 0>;
- clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
- clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
- };
-
- tmu_gpu: tmu@100a0000 {
- compatible = "samsung,exynos5420-tmu-ext-triminfo";
- reg = <0x100a0000 0x100>, <0x10068000 0x4>;
- interrupts = <0 215 0>;
- clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
- clock-names = "tmu_apbif", "tmu_triminfo_apbif";
- #include "exynos4412-tmu-sensor-conf.dtsi"
- };
-
- thermal-zones {
- cpu0_thermal: cpu0-thermal {
- thermal-sensors = <&tmu_cpu0>;
- #include "exynos5420-trip-points.dtsi"
- };
- cpu1_thermal: cpu1-thermal {
- thermal-sensors = <&tmu_cpu1>;
- #include "exynos5420-trip-points.dtsi"
- };
- cpu2_thermal: cpu2-thermal {
- thermal-sensors = <&tmu_cpu2>;
- #include "exynos5420-trip-points.dtsi"
- };
- cpu3_thermal: cpu3-thermal {
- thermal-sensors = <&tmu_cpu3>;
- #include "exynos5420-trip-points.dtsi"
- };
- gpu_thermal: gpu-thermal {
- thermal-sensors = <&tmu_gpu>;
- #include "exynos5420-trip-points.dtsi"
+ i2s2: i2s@12D70000 {
+ compatible = "samsung,exynos5420-i2s";
+ reg = <0x12D70000 0x100>;
+ dmas = <&pdma0 12
+ &pdma0 11>;
+ dma-names = "tx", "rx";
+ clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
+ clock-names = "iis", "i2s_opclk0";
+ #clock-cells = <1>;
+ clock-output-names = "i2s_cdclk2";
+ #sound-dai-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2_bus>;
+ status = "disabled";
};
- };
- watchdog: watchdog@101D0000 {
- compatible = "samsung,exynos5420-wdt";
- reg = <0x101D0000 0x100>;
- interrupts = <0 42 0>;
- clocks = <&clock CLK_WDT>;
- clock-names = "watchdog";
- samsung,syscon-phandle = <&pmu_system_controller>;
- };
-
- sss: sss@10830000 {
- compatible = "samsung,exynos4210-secss";
- reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
- clocks = <&clock CLK_SSS>;
- clock-names = "secss";
- };
-
- usbdrd3_0: usb3-0 {
- compatible = "samsung,exynos5250-dwusb3";
- clocks = <&clock CLK_USBD300>;
- clock-names = "usbdrd30";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- usbdrd_dwc3_0: dwc3@12000000 {
- compatible = "snps,dwc3";
- reg = <0x12000000 0x10000>;
- interrupts = <0 72 0>;
- phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
- phy-names = "usb2-phy", "usb3-phy";
+ spi_0: spi@12d20000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x12d20000 0x100>;
+ interrupts = <0 68 0>;
+ dmas = <&pdma0 5
+ &pdma0 4>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
+ clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+ clock-names = "spi", "spi_busclk0";
+ status = "disabled";
};
- };
-
- usbdrd_phy0: phy@12100000 {
- compatible = "samsung,exynos5420-usbdrd-phy";
- reg = <0x12100000 0x100>;
- clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
- clock-names = "phy", "ref";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <1>;
- };
- usbdrd3_1: usb3-1 {
- compatible = "samsung,exynos5250-dwusb3";
- clocks = <&clock CLK_USBD301>;
- clock-names = "usbdrd30";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- usbdrd_dwc3_1: dwc3@12400000 {
- compatible = "snps,dwc3";
- reg = <0x12400000 0x10000>;
- interrupts = <0 73 0>;
- phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
- phy-names = "usb2-phy", "usb3-phy";
+ spi_1: spi@12d30000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x12d30000 0x100>;
+ interrupts = <0 69 0>;
+ dmas = <&pdma1 5
+ &pdma1 4>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+ clock-names = "spi", "spi_busclk0";
+ status = "disabled";
};
- };
-
- usbdrd_phy1: phy@12500000 {
- compatible = "samsung,exynos5420-usbdrd-phy";
- reg = <0x12500000 0x100>;
- clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
- clock-names = "phy", "ref";
- samsung,pmu-syscon = <&pmu_system_controller>;
- #phy-cells = <1>;
- };
-
- usbhost2: usb@12110000 {
- compatible = "samsung,exynos4210-ehci";
- reg = <0x12110000 0x100>;
- interrupts = <0 71 0>;
- clocks = <&clock CLK_USBH20>;
- clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2_phy 1>;
+ spi_2: spi@12d40000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x12d40000 0x100>;
+ interrupts = <0 70 0>;
+ dmas = <&pdma0 7
+ &pdma0 6>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_bus>;
+ clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+ clock-names = "spi", "spi_busclk0";
+ status = "disabled";
};
- };
- usbhost1: usb@12120000 {
- compatible = "samsung,exynos4210-ohci";
- reg = <0x12120000 0x100>;
- interrupts = <0 71 0>;
-
- clocks = <&clock CLK_USBH20>;
- clock-names = "usbhost";
- #address-cells = <1>;
- #size-cells = <0>;
- port@0 {
- reg = <0>;
- phys = <&usb2_phy 1>;
+ dp_phy: dp-video-phy {
+ compatible = "samsung,exynos5420-dp-video-phy";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <0>;
};
- };
-
- usb2_phy: phy@12130000 {
- compatible = "samsung,exynos5250-usb2-phy";
- reg = <0x12130000 0x100>;
- clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
- clock-names = "phy", "ref";
- #phy-cells = <1>;
- samsung,sysreg-phandle = <&sysreg_system_controller>;
- samsung,pmureg-phandle = <&pmu_system_controller>;
- };
-
- sysmmu_g2dr: sysmmu@0x10A60000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x10A60000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <24 5>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
- #iommu-cells = <0>;
- };
-
- sysmmu_g2dw: sysmmu@0x10A70000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x10A70000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <22 2>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
- #iommu-cells = <0>;
- };
-
- sysmmu_tv: sysmmu@0x14650000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x14650000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <7 4>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
- power-domains = <&disp_pd>;
- #iommu-cells = <0>;
- };
-
- sysmmu_gscl0: sysmmu@0x13E80000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13E80000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <2 0>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
- power-domains = <&gsc_pd>;
- #iommu-cells = <0>;
- };
-
- sysmmu_gscl1: sysmmu@0x13E90000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x13E90000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <2 2>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
- power-domains = <&gsc_pd>;
- #iommu-cells = <0>;
- };
-
- sysmmu_scaler0r: sysmmu@0x12880000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x12880000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <22 4>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
- #iommu-cells = <0>;
- };
-
- sysmmu_scaler1r: sysmmu@0x12890000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x12890000 0x1000>;
- interrupts = <0 186 0>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
- #iommu-cells = <0>;
- };
- sysmmu_scaler2r: sysmmu@0x128A0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x128A0000 0x1000>;
- interrupts = <0 188 0>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
- #iommu-cells = <0>;
- };
-
- sysmmu_scaler0w: sysmmu@0x128C0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x128C0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <27 2>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
- #iommu-cells = <0>;
- };
-
- sysmmu_scaler1w: sysmmu@0x128D0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x128D0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <22 6>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
- #iommu-cells = <0>;
- };
-
- sysmmu_scaler2w: sysmmu@0x128E0000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x128E0000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <19 6>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
- #iommu-cells = <0>;
- };
-
- sysmmu_rotator: sysmmu@0x11D40000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x11D40000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <4 0>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
- #iommu-cells = <0>;
- };
-
- sysmmu_jpeg0: sysmmu@0x11F10000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x11F10000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <4 2>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
- #iommu-cells = <0>;
- };
-
- sysmmu_jpeg1: sysmmu@0x11F20000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x11F20000 0x1000>;
- interrupts = <0 169 0>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
- #iommu-cells = <0>;
- };
-
- sysmmu_mfc_l: sysmmu@0x11200000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x11200000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <6 2>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
- power-domains = <&mfc_pd>;
- #iommu-cells = <0>;
- };
-
- sysmmu_mfc_r: sysmmu@0x11210000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x11210000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <8 5>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
- power-domains = <&mfc_pd>;
- #iommu-cells = <0>;
- };
-
- sysmmu_fimd1_0: sysmmu@0x14640000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x14640000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <3 2>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
- power-domains = <&disp_pd>;
- #iommu-cells = <0>;
- };
-
- sysmmu_fimd1_1: sysmmu@0x14680000 {
- compatible = "samsung,exynos-sysmmu";
- reg = <0x14680000 0x1000>;
- interrupt-parent = <&combiner>;
- interrupts = <3 0>;
- clock-names = "sysmmu", "master";
- clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
- power-domains = <&disp_pd>;
- #iommu-cells = <0>;
- };
-
- bus_wcore: bus_wcore {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
- clock-names = "bus";
- operating-points-v2 = <&bus_wcore_opp_table>;
- status = "disabled";
- };
-
- bus_noc: bus_noc {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK100_NOC>;
- clock-names = "bus";
- operating-points-v2 = <&bus_noc_opp_table>;
- status = "disabled";
- };
-
- bus_fsys_apb: bus_fsys_apb {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
- clock-names = "bus";
- operating-points-v2 = <&bus_fsys_apb_opp_table>;
- status = "disabled";
- };
-
- bus_fsys: bus_fsys {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
- clock-names = "bus";
- operating-points-v2 = <&bus_fsys_apb_opp_table>;
- status = "disabled";
- };
-
- bus_fsys2: bus_fsys2 {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
- clock-names = "bus";
- operating-points-v2 = <&bus_fsys2_opp_table>;
- status = "disabled";
- };
-
- bus_mfc: bus_mfc {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK333>;
- clock-names = "bus";
- operating-points-v2 = <&bus_mfc_opp_table>;
- status = "disabled";
- };
-
- bus_gen: bus_gen {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK266>;
- clock-names = "bus";
- operating-points-v2 = <&bus_gen_opp_table>;
- status = "disabled";
- };
-
- bus_peri: bus_peri {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK66>;
- clock-names = "bus";
- operating-points-v2 = <&bus_peri_opp_table>;
- status = "disabled";
- };
-
- bus_g2d: bus_g2d {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK333_G2D>;
- clock-names = "bus";
- operating-points-v2 = <&bus_g2d_opp_table>;
- status = "disabled";
- };
-
- bus_g2d_acp: bus_g2d_acp {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK266_G2D>;
- clock-names = "bus";
- operating-points-v2 = <&bus_g2d_acp_opp_table>;
- status = "disabled";
- };
-
- bus_jpeg: bus_jpeg {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
- clock-names = "bus";
- operating-points-v2 = <&bus_jpeg_opp_table>;
- status = "disabled";
- };
-
- bus_jpeg_apb: bus_jpeg_apb {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK166>;
- clock-names = "bus";
- operating-points-v2 = <&bus_jpeg_apb_opp_table>;
- status = "disabled";
- };
-
- bus_disp1_fimd: bus_disp1_fimd {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
- clock-names = "bus";
- operating-points-v2 = <&bus_disp1_fimd_opp_table>;
- status = "disabled";
- };
-
- bus_disp1: bus_disp1 {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
- clock-names = "bus";
- operating-points-v2 = <&bus_disp1_opp_table>;
- status = "disabled";
- };
-
- bus_gscl_scaler: bus_gscl_scaler {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
- clock-names = "bus";
- operating-points-v2 = <&bus_gscl_opp_table>;
- status = "disabled";
- };
-
- bus_mscl: bus_mscl {
- compatible = "samsung,exynos-bus";
- clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
- clock-names = "bus";
- operating-points-v2 = <&bus_mscl_opp_table>;
- status = "disabled";
- };
-
- bus_wcore_opp_table: opp_table2 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <84000000>;
- opp-microvolt = <925000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <111000000>;
- opp-microvolt = <950000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <222000000>;
- opp-microvolt = <950000>;
+ mipi_phy: mipi-video-phy {
+ compatible = "samsung,s5pv210-mipi-video-phy";
+ syscon = <&pmu_system_controller>;
+ #phy-cells = <1>;
};
- opp03 {
- opp-hz = /bits/ 64 <333000000>;
- opp-microvolt = <950000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <987500>;
- };
- };
- bus_noc_opp_table: opp_table3 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <67000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <75000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <86000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <100000000>;
+ dsi@14500000 {
+ compatible = "samsung,exynos5410-mipi-dsi";
+ reg = <0x14500000 0x10000>;
+ interrupts = <0 82 0>;
+ phys = <&mipi_phy 1>;
+ phy-names = "dsim";
+ clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
+ clock-names = "bus_clk", "pll_clk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
};
- };
-
- bus_fsys_apb_opp_table: opp_table4 {
- compatible = "operating-points-v2";
- opp-shared;
- opp00 {
- opp-hz = /bits/ 64 <100000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <200000000>;
+ adc: adc@12D10000 {
+ compatible = "samsung,exynos-adc-v2";
+ reg = <0x12D10000 0x100>;
+ interrupts = <0 106 0>;
+ clocks = <&clock CLK_TSADC>;
+ clock-names = "adc";
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ status = "disabled";
};
- };
-
- bus_fsys2_opp_table: opp_table5 {
- compatible = "operating-points-v2";
- opp00 {
- opp-hz = /bits/ 64 <75000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <100000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <150000000>;
+ hsi2c_8: i2c@12E00000 {
+ compatible = "samsung,exynos5250-hsi2c";
+ reg = <0x12E00000 0x1000>;
+ interrupts = <0 87 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c8_hs_bus>;
+ clocks = <&clock CLK_USI4>;
+ clock-names = "hsi2c";
+ status = "disabled";
};
- };
- bus_mfc_opp_table: opp_table6 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <96000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <111000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <167000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <222000000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <333000000>;
+ hsi2c_9: i2c@12E10000 {
+ compatible = "samsung,exynos5250-hsi2c";
+ reg = <0x12E10000 0x1000>;
+ interrupts = <0 88 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c9_hs_bus>;
+ clocks = <&clock CLK_USI5>;
+ clock-names = "hsi2c";
+ status = "disabled";
};
- };
- bus_gen_opp_table: opp_table7 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <89000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <133000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <178000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <267000000>;
+ hsi2c_10: i2c@12E20000 {
+ compatible = "samsung,exynos5250-hsi2c";
+ reg = <0x12E20000 0x1000>;
+ interrupts = <0 203 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c10_hs_bus>;
+ clocks = <&clock CLK_USI6>;
+ clock-names = "hsi2c";
+ status = "disabled";
};
- };
-
- bus_peri_opp_table: opp_table8 {
- compatible = "operating-points-v2";
- opp00 {
- opp-hz = /bits/ 64 <67000000>;
+ hdmi: hdmi@14530000 {
+ compatible = "samsung,exynos5420-hdmi";
+ reg = <0x14530000 0x70000>;
+ interrupts = <0 95 0>;
+ clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+ <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+ <&clock CLK_MOUT_HDMI>;
+ clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+ "sclk_hdmiphy", "mout_hdmi";
+ phy = <&hdmiphy>;
+ samsung,syscon-phandle = <&pmu_system_controller>;
+ status = "disabled";
+ power-domains = <&disp_pd>;
+ };
+
+ hdmiphy: hdmiphy@145D0000 {
+ reg = <0x145D0000 0x20>;
+ };
+
+ mixer: mixer@14450000 {
+ compatible = "samsung,exynos5420-mixer";
+ reg = <0x14450000 0x10000>;
+ interrupts = <0 94 0>;
+ clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+ <&clock CLK_SCLK_HDMI>;
+ clock-names = "mixer", "hdmi", "sclk_hdmi";
+ power-domains = <&disp_pd>;
+ iommus = <&sysmmu_tv>;
+ };
+
+ rotator: rotator@11C00000 {
+ compatible = "samsung,exynos5250-rotator";
+ reg = <0x11C00000 0x64>;
+ interrupts = <0 84 0>;
+ clocks = <&clock CLK_ROTATOR>;
+ clock-names = "rotator";
+ iommus = <&sysmmu_rotator>;
+ };
+
+ gsc_0: video-scaler@13e00000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e00000 0x1000>;
+ interrupts = <0 85 0>;
+ clocks = <&clock CLK_GSCL0>;
+ clock-names = "gscl";
+ power-domains = <&gsc_pd>;
+ iommus = <&sysmmu_gscl0>;
+ };
+
+ gsc_1: video-scaler@13e10000 {
+ compatible = "samsung,exynos5-gsc";
+ reg = <0x13e10000 0x1000>;
+ interrupts = <0 86 0>;
+ clocks = <&clock CLK_GSCL1>;
+ clock-names = "gscl";
+ power-domains = <&gsc_pd>;
+ iommus = <&sysmmu_gscl1>;
+ };
+
+ jpeg_0: jpeg@11F50000 {
+ compatible = "samsung,exynos5420-jpeg";
+ reg = <0x11F50000 0x1000>;
+ interrupts = <0 89 0>;
+ clock-names = "jpeg";
+ clocks = <&clock CLK_JPEG>;
+ iommus = <&sysmmu_jpeg0>;
+ };
+
+ jpeg_1: jpeg@11F60000 {
+ compatible = "samsung,exynos5420-jpeg";
+ reg = <0x11F60000 0x1000>;
+ interrupts = <0 168 0>;
+ clock-names = "jpeg";
+ clocks = <&clock CLK_JPEG2>;
+ iommus = <&sysmmu_jpeg1>;
+ };
+
+ pmu_system_controller: system-controller@10040000 {
+ compatible = "samsung,exynos5420-pmu", "syscon";
+ reg = <0x10040000 0x5000>;
+ clock-names = "clkout16";
+ clocks = <&clock CLK_FIN_PLL>;
+ #clock-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
};
- };
-
- bus_g2d_opp_table: opp_table9 {
- compatible = "operating-points-v2";
- opp00 {
- opp-hz = /bits/ 64 <84000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <167000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <222000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <300000000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <333000000>;
+ tmu_cpu0: tmu@10060000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x10060000 0x100>;
+ interrupts = <0 65 0>;
+ clocks = <&clock CLK_TMU>;
+ clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
+
+ tmu_cpu1: tmu@10064000 {
+ compatible = "samsung,exynos5420-tmu";
+ reg = <0x10064000 0x100>;
+ interrupts = <0 183 0>;
+ clocks = <&clock CLK_TMU>;
+ clock-names = "tmu_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
+
+ tmu_cpu2: tmu@10068000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+ interrupts = <0 184 0>;
+ clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
+
+ tmu_cpu3: tmu@1006c000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+ interrupts = <0 185 0>;
+ clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
+
+ tmu_gpu: tmu@100a0000 {
+ compatible = "samsung,exynos5420-tmu-ext-triminfo";
+ reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+ interrupts = <0 215 0>;
+ clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
+ clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+ #include "exynos4412-tmu-sensor-conf.dtsi"
+ };
+
+ sysmmu_g2dr: sysmmu@0x10A60000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x10A60000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <24 5>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_g2dw: sysmmu@0x10A70000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x10A70000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <22 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_tv: sysmmu@0x14650000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x14650000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <7 4>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
+ power-domains = <&disp_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_gscl0: sysmmu@0x13E80000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13E80000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+ power-domains = <&gsc_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_gscl1: sysmmu@0x13E90000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x13E90000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <2 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+ power-domains = <&gsc_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler0r: sysmmu@0x12880000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x12880000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <22 4>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler1r: sysmmu@0x12890000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x12890000 0x1000>;
+ interrupts = <0 186 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler2r: sysmmu@0x128A0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x128A0000 0x1000>;
+ interrupts = <0 188 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler0w: sysmmu@0x128C0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x128C0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <27 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler1w: sysmmu@0x128D0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x128D0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <22 6>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_scaler2w: sysmmu@0x128E0000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x128E0000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <19 6>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_rotator: sysmmu@0x11D40000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11D40000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_jpeg0: sysmmu@0x11F10000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11F10000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <4 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_jpeg1: sysmmu@0x11F20000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11F20000 0x1000>;
+ interrupts = <0 169 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_mfc_l: sysmmu@0x11200000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11200000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <6 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+ power-domains = <&mfc_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_mfc_r: sysmmu@0x11210000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x11210000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <8 5>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+ power-domains = <&mfc_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimd1_0: sysmmu@0x14640000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x14640000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <3 2>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+ power-domains = <&disp_pd>;
+ #iommu-cells = <0>;
+ };
+
+ sysmmu_fimd1_1: sysmmu@0x14680000 {
+ compatible = "samsung,exynos-sysmmu";
+ reg = <0x14680000 0x1000>;
+ interrupt-parent = <&combiner>;
+ interrupts = <3 0>;
+ clock-names = "sysmmu", "master";
+ clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
+ power-domains = <&disp_pd>;
+ #iommu-cells = <0>;
+ };
+
+ bus_wcore: bus_wcore {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_wcore_opp_table>;
+ status = "disabled";
};
- };
-
- bus_g2d_acp_opp_table: opp_table10 {
- compatible = "operating-points-v2";
- opp00 {
- opp-hz = /bits/ 64 <67000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <133000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <178000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <267000000>;
+ bus_noc: bus_noc {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK100_NOC>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_noc_opp_table>;
+ status = "disabled";
};
- };
-
- bus_jpeg_opp_table: opp_table11 {
- compatible = "operating-points-v2";
- opp00 {
- opp-hz = /bits/ 64 <75000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <150000000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <200000000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <300000000>;
+ bus_fsys_apb: bus_fsys_apb {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_fsys_apb_opp_table>;
+ status = "disabled";
};
- };
-
- bus_jpeg_apb_opp_table: opp_table12 {
- compatible = "operating-points-v2";
- opp00 {
- opp-hz = /bits/ 64 <84000000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <111000000>;
+ bus_fsys: bus_fsys {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_fsys_apb_opp_table>;
+ status = "disabled";
};
- opp02 {
- opp-hz = /bits/ 64 <134000000>;
+
+ bus_fsys2: bus_fsys2 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_fsys2_opp_table>;
+ status = "disabled";
};
- opp03 {
- opp-hz = /bits/ 64 <167000000>;
+
+ bus_mfc: bus_mfc {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK333>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_mfc_opp_table>;
+ status = "disabled";
};
- };
- bus_disp1_fimd_opp_table: opp_table13 {
- compatible = "operating-points-v2";
+ bus_gen: bus_gen {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK266>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_gen_opp_table>;
+ status = "disabled";
+ };
- opp00 {
- opp-hz = /bits/ 64 <120000000>;
+ bus_peri: bus_peri {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK66>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_peri_opp_table>;
+ status = "disabled";
};
- opp01 {
- opp-hz = /bits/ 64 <200000000>;
+
+ bus_g2d: bus_g2d {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK333_G2D>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_g2d_opp_table>;
+ status = "disabled";
};
- };
- bus_disp1_opp_table: opp_table14 {
- compatible = "operating-points-v2";
+ bus_g2d_acp: bus_g2d_acp {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK266_G2D>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_g2d_acp_opp_table>;
+ status = "disabled";
+ };
- opp00 {
- opp-hz = /bits/ 64 <120000000>;
+ bus_jpeg: bus_jpeg {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_jpeg_opp_table>;
+ status = "disabled";
};
- opp01 {
- opp-hz = /bits/ 64 <200000000>;
+
+ bus_jpeg_apb: bus_jpeg_apb {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK166>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_jpeg_apb_opp_table>;
+ status = "disabled";
};
- opp02 {
- opp-hz = /bits/ 64 <300000000>;
+
+ bus_disp1_fimd: bus_disp1_fimd {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_disp1_fimd_opp_table>;
+ status = "disabled";
};
- };
- bus_gscl_opp_table: opp_table15 {
- compatible = "operating-points-v2";
+ bus_disp1: bus_disp1 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_disp1_opp_table>;
+ status = "disabled";
+ };
- opp00 {
- opp-hz = /bits/ 64 <150000000>;
+ bus_gscl_scaler: bus_gscl_scaler {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_gscl_opp_table>;
+ status = "disabled";
};
- opp01 {
- opp-hz = /bits/ 64 <200000000>;
+
+ bus_mscl: bus_mscl {
+ compatible = "samsung,exynos-bus";
+ clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_mscl_opp_table>;
+ status = "disabled";
};
- opp02 {
- opp-hz = /bits/ 64 <300000000>;
+
+ bus_wcore_opp_table: opp_table2 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <84000000>;
+ opp-microvolt = <925000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <111000000>;
+ opp-microvolt = <950000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <222000000>;
+ opp-microvolt = <950000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <333000000>;
+ opp-microvolt = <950000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <987500>;
+ };
+ };
+
+ bus_noc_opp_table: opp_table3 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <67000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <75000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <86000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ };
+
+ bus_fsys_apb_opp_table: opp_table4 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp00 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ };
+
+ bus_fsys2_opp_table: opp_table5 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <75000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <150000000>;
+ };
+ };
+
+ bus_mfc_opp_table: opp_table6 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <96000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <111000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <167000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <222000000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <333000000>;
+ };
+ };
+
+ bus_gen_opp_table: opp_table7 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <89000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <133000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <178000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <267000000>;
+ };
+ };
+
+ bus_peri_opp_table: opp_table8 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <67000000>;
+ };
+ };
+
+ bus_g2d_opp_table: opp_table9 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <84000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <167000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <222000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <333000000>;
+ };
+ };
+
+ bus_g2d_acp_opp_table: opp_table10 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <67000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <133000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <178000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <267000000>;
+ };
+ };
+
+ bus_jpeg_opp_table: opp_table11 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <75000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <150000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+ };
+
+ bus_jpeg_apb_opp_table: opp_table12 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <84000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <111000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <134000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <167000000>;
+ };
+ };
+
+ bus_disp1_fimd_opp_table: opp_table13 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <120000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ };
+
+ bus_disp1_opp_table: opp_table14 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <120000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+ };
+
+ bus_gscl_opp_table: opp_table15 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <150000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+ };
+
+ bus_mscl_opp_table: opp_table16 {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <84000000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <167000000>;
+ };
+ opp02 {
+ opp-hz = /bits/ 64 <222000000>;
+ };
+ opp03 {
+ opp-hz = /bits/ 64 <333000000>;
+ };
+ opp04 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
};
};
- bus_mscl_opp_table: opp_table16 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <84000000>;
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ thermal-sensors = <&tmu_cpu0>;
+ #include "exynos5420-trip-points.dtsi"
};
- opp01 {
- opp-hz = /bits/ 64 <167000000>;
+ cpu1_thermal: cpu1-thermal {
+ thermal-sensors = <&tmu_cpu1>;
+ #include "exynos5420-trip-points.dtsi"
};
- opp02 {
- opp-hz = /bits/ 64 <222000000>;
+ cpu2_thermal: cpu2-thermal {
+ thermal-sensors = <&tmu_cpu2>;
+ #include "exynos5420-trip-points.dtsi"
};
- opp03 {
- opp-hz = /bits/ 64 <333000000>;
+ cpu3_thermal: cpu3-thermal {
+ thermal-sensors = <&tmu_cpu3>;
+ #include "exynos5420-trip-points.dtsi"
};
- opp04 {
- opp-hz = /bits/ 64 <400000000>;
+ gpu_thermal: gpu-thermal {
+ thermal-sensors = <&tmu_gpu>;
+ #include "exynos5420-trip-points.dtsi"
};
};
};
iommu-names = "m0", "m1";
};
+&i2c_0 {
+ clocks = <&clock CLK_I2C0>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+ clocks = <&clock CLK_I2C1>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+ clocks = <&clock CLK_I2C2>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+ clocks = <&clock CLK_I2C3>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+ clocks = <&clock CLK_USI0>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+ clocks = <&clock CLK_USI1>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+ clocks = <&clock CLK_USI2>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+ clocks = <&clock CLK_USI3>;
+ clock-names = "hsi2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_hs_bus>;
+};
+
+&mct {
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+ clock-names = "fin_pll", "mct";
+};
+
+&pwm {
+ clocks = <&clock CLK_PWM>;
+ clock-names = "timers";
+};
+
&rtc {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
clock-names = "uart", "clk_uart_baud0";
};
+&sss {
+ clocks = <&clock CLK_SSS>;
+ clock-names = "secss";
+};
+
+&usbdrd3_0 {
+ clocks = <&clock CLK_USBD300>;
+ clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+ clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+ clocks = <&clock CLK_USBD301>;
+ clock-names = "usbdrd30";
+};
+
+&usbdrd_dwc3_1 {
+ interrupts = <GIC_SPI 73 0>;
+};
+
+&usbdrd_phy1 {
+ clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+ clock-names = "phy", "ref";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+ clocks = <&clock CLK_USBH20>;
+ clock-names = "usbhost";
+};
+
+&usbhost2 {
+ clocks = <&clock CLK_USBH20>;
+ clock-names = "usbhost";
+};
+
+&usb2_phy {
+ clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+ clock-names = "phy", "ref";
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
+&watchdog {
+ clocks = <&clock CLK_WDT>;
+ clock-names = "watchdog";
+ samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
#include "exynos5420-pinctrl.dtsi"
+++ /dev/null
-/*
- * Device tree sources for Exynos5422 thermal zone
- *
- * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
- * Anand Moon <linux.amoon@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- thermal-zones {
- cpu0_thermal: cpu0-thermal {
- thermal-sensors = <&tmu_cpu0 0>;
- polling-delay-passive = <250>;
- polling-delay = <0>;
- trips {
- cpu_alert0: cpu-alert-0 {
- temperature = <50000>; /* millicelsius */
- hysteresis = <5000>; /* millicelsius */
- type = "active";
- };
- cpu_alert1: cpu-alert-1 {
- temperature = <60000>; /* millicelsius */
- hysteresis = <5000>; /* millicelsius */
- type = "active";
- };
- cpu_alert2: cpu-alert-2 {
- temperature = <70000>; /* millicelsius */
- hysteresis = <5000>; /* millicelsius */
- type = "active";
- };
- cpu_crit0: cpu-crit-0 {
- temperature = <120000>; /* millicelsius */
- hysteresis = <0>; /* millicelsius */
- type = "critical";
- };
- /*
- * Exyunos542x support only 4 trip-points
- * so for these polling mode is required.
- * Start polling at temperature level of last
- * interrupt-driven trip: cpu_alert2
- */
- cpu_alert3: cpu-alert-3 {
- temperature = <70000>; /* millicelsius */
- hysteresis = <10000>; /* millicelsius */
- type = "passive";
- };
- cpu_alert4: cpu-alert-4 {
- temperature = <85000>; /* millicelsius */
- hysteresis = <10000>; /* millicelsius */
- type = "passive";
- };
-
- };
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device = <&fan0 0 1>;
- };
- map1 {
- trip = <&cpu_alert1>;
- cooling-device = <&fan0 1 2>;
- };
- map2 {
- trip = <&cpu_alert2>;
- cooling-device = <&fan0 2 3>;
- };
- /*
- * When reaching cpu_alert3, reduce CPU
- * by 2 steps. On Exynos5422/5800 that would
- * be: 1500 MHz and 1100 MHz.
- */
- map3 {
- trip = <&cpu_alert3>;
- cooling-device = <&cpu0 0 2>;
- };
- map4 {
- trip = <&cpu_alert3>;
- cooling-device = <&cpu4 0 2>;
- };
-
- /*
- * When reaching cpu_alert4, reduce CPU
- * further, down to 600 MHz (11 steps for big,
- * 7 steps for LITTLE).
- */
- map5 {
- trip = <&cpu_alert4>;
- cooling-device = <&cpu0 3 7>;
- };
- map6 {
- trip = <&cpu_alert4>;
- cooling-device = <&cpu4 3 11>;
- };
- };
- };
- };
-};
/*
* Hardkernel Odroid XU3 board device tree source
*
- * Copyright (c) 2014 Collabora Ltd.
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
+ * Anand Moon <linux.amoon@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <dt-bindings/sound/samsung-i2s.h>
#include "exynos5800.dtsi"
#include "exynos5422-cpus.dtsi"
-#include "exynos5422-cpu-thermal.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
memory {
#cooling-cells = <2>;
cooling-levels = <0 130 170 230>;
};
+
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ thermal-sensors = <&tmu_cpu0 0>;
+ polling-delay-passive = <250>;
+ polling-delay = <0>;
+ trips {
+ cpu_alert0: cpu-alert-0 {
+ temperature = <50000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_alert1: cpu-alert-1 {
+ temperature = <60000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_alert2: cpu-alert-2 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <5000>; /* millicelsius */
+ type = "active";
+ };
+ cpu_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ /*
+ * Exynos542x supports only 4 trip-points
+ * so for these polling mode is required.
+ * Start polling at temperature level of last
+ * interrupt-driven trip: cpu_alert2
+ */
+ cpu_alert3: cpu-alert-3 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert4: cpu-alert-4 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "passive";
+ };
+
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&fan0 0 1>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&fan0 1 2>;
+ };
+ map2 {
+ trip = <&cpu_alert2>;
+ cooling-device = <&fan0 2 3>;
+ };
+ /*
+ * When reaching cpu_alert3, reduce CPU
+ * by 2 steps. On Exynos5422/5800 that would
+ * be: 1600 MHz and 1100 MHz.
+ */
+ map3 {
+ trip = <&cpu_alert3>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map4 {
+ trip = <&cpu_alert3>;
+ cooling-device = <&cpu4 0 2>;
+ };
+
+ /*
+ * When reaching cpu_alert4, reduce CPU
+ * further, down to 600 MHz (11 steps for big,
+ * 7 steps for LITTLE).
+ */
+ map5 {
+ trip = <&cpu_alert4>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map6 {
+ trip = <&cpu_alert4>;
+ cooling-device = <&cpu4 3 11>;
+ };
+ };
+ };
+ };
};
&bus_wcore {
};
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
-};
-
&mmc_0 {
status = "okay";
mmc-pwrseq = <&emmc_pwrseq>;
&tmu_cpu0 {
vtmu-supply = <&ldo7_reg>;
- status = "okay";
};
&tmu_cpu1 {
vtmu-supply = <&ldo7_reg>;
- status = "okay";
};
&tmu_cpu2 {
vtmu-supply = <&ldo7_reg>;
- status = "okay";
};
&tmu_cpu3 {
vtmu-supply = <&ldo7_reg>;
- status = "okay";
};
&tmu_gpu {
vtmu-supply = <&ldo7_reg>;
- status = "okay";
};
&rtc {
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
#include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
/ {
model = "Hardkernel Odroid XU3 Lite";
compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
-
- pwmleds {
- compatible = "pwm-leds";
-
- greenled {
- label = "green:mmc0";
- pwms = <&pwm 1 2000000 0>;
- pwm-names = "pwm1";
- /*
- * Green LED is much brighter than the others
- * so limit its max brightness
- */
- max_brightness = <127>;
- linux,default-trigger = "mmc0";
- };
-
- blueled {
- label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
- pwm-names = "pwm2";
- max_brightness = <255>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- gpioleds {
- compatible = "gpio-leds";
- redled {
- label = "red:microSD";
- gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc1";
- };
- };
};
&pwm {
/dts-v1/;
#include "exynos5422-odroidxu3-common.dtsi"
#include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
/ {
model = "Hardkernel Odroid XU3";
compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
-
- pwmleds {
- compatible = "pwm-leds";
-
- greenled {
- label = "green:mmc0";
- pwms = <&pwm 1 2000000 0>;
- pwm-names = "pwm1";
- /*
- * Green LED is much brighter than the others
- * so limit its max brightness
- */
- max_brightness = <127>;
- linux,default-trigger = "mmc0";
- };
-
- blueled {
- label = "blue:heartbeat";
- pwms = <&pwm 2 2000000 0>;
- pwm-names = "pwm2";
- max_brightness = <255>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- gpioleds {
- compatible = "gpio-leds";
- redled {
- label = "red:microSD";
- gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc1";
- };
- };
};
&i2c_0 {
--- /dev/null
+/*
+ * Hardkernel Odroid XU/XU3 LED device tree source
+ *
+ * Copyright (c) 2015,2016 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ pwmleds {
+ compatible = "pwm-leds";
+
+ greenled {
+ label = "green:mmc0";
+ pwms = <&pwm 1 2000000 0>;
+ pwm-names = "pwm1";
+ /*
+ * Green LED is much brighter than the others
+ * so limit its max brightness
+ */
+ max_brightness = <127>;
+ linux,default-trigger = "mmc0";
+ };
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ redled {
+ label = "red:microSD";
+ gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc1";
+ };
+ };
+};
--- /dev/null
+/*
+ * Samsung's Exynos54xx SoC series common device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific
+ * Exynos 54xx SoCs should include this file and customize it further
+ * (e.g. with clocks).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include "exynos5.dtsi"
+
+/ {
+ compatible = "samsung,exynos5";
+
+ aliases {
+ i2c4 = &hsi2c_4;
+ i2c5 = &hsi2c_5;
+ i2c6 = &hsi2c_6;
+ i2c7 = &hsi2c_7;
+ usbdrdphy0 = &usbdrd_phy0;
+ usbdrdphy1 = &usbdrd_phy1;
+ };
+
+ soc: soc {
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x54000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x54000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@53000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x53000 0x1000>;
+ };
+ };
+
+ mct: mct@101c0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x101c0000 0xb00>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
+ <8>, <9>, <10>, <11>;
+
+ mct_map: mct-map {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0 &combiner 23 3>,
+ <1 &combiner 23 4>,
+ <2 &combiner 25 2>,
+ <3 &combiner 25 3>,
+ <4 &gic 0 120 0>,
+ <5 &gic 0 121 0>,
+ <6 &gic 0 122 0>,
+ <7 &gic 0 123 0>,
+ <8 &gic 0 128 0>,
+ <9 &gic 0 129 0>,
+ <10 &gic 0 130 0>,
+ <11 &gic 0 131 0>;
+ };
+ };
+
+ watchdog: watchdog@101d0000 {
+ compatible = "samsung,exynos5420-wdt";
+ reg = <0x101d0000 0x100>;
+ interrupts = <0 42 0>;
+ };
+
+ sss: sss@10830000 {
+ compatible = "samsung,exynos4210-secss";
+ reg = <0x10830000 0x300>;
+ interrupts = <0 112 0>;
+ };
+
+ /* i2c_0-3 are defined in exynos5.dtsi */
+ hsi2c_4: i2c@12ca0000 {
+ compatible = "samsung,exynos5250-hsi2c";
+ reg = <0x12ca0000 0x1000>;
+ interrupts = <0 60 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_5: i2c@12cb0000 {
+ compatible = "samsung,exynos5250-hsi2c";
+ reg = <0x12cb0000 0x1000>;
+ interrupts = <0 61 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_6: i2c@12cc0000 {
+ compatible = "samsung,exynos5250-hsi2c";
+ reg = <0x12cc0000 0x1000>;
+ interrupts = <0 62 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ hsi2c_7: i2c@12cd0000 {
+ compatible = "samsung,exynos5250-hsi2c";
+ reg = <0x12cd0000 0x1000>;
+ interrupts = <0 63 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ usbdrd3_0: usb3-0 {
+ compatible = "samsung,exynos5250-dwusb3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbdrd_dwc3_0: dwc3@12000000 {
+ compatible = "snps,dwc3";
+ reg = <0x12000000 0x10000>;
+ interrupts = <0 72 0>;
+ phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usbdrd_phy0: phy@12100000 {
+ compatible = "samsung,exynos5420-usbdrd-phy";
+ reg = <0x12100000 0x100>;
+ #phy-cells = <1>;
+ };
+
+ usbdrd3_1: usb3-1 {
+ compatible = "samsung,exynos5250-dwusb3";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbdrd_dwc3_1: dwc3@12400000 {
+ compatible = "snps,dwc3";
+ reg = <0x12400000 0x10000>;
+ phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
+
+ usbdrd_phy1: phy@12500000 {
+ compatible = "samsung,exynos5420-usbdrd-phy";
+ reg = <0x12500000 0x100>;
+ #phy-cells = <1>;
+ };
+
+ usbhost2: usb@12110000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12110000 0x100>;
+ interrupts = <0 71 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&usb2_phy 1>;
+ };
+ };
+
+ usbhost1: usb@12120000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12120000 0x100>;
+ interrupts = <0 71 0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&usb2_phy 1>;
+ };
+ };
+
+ usb2_phy: phy@12130000 {
+ compatible = "samsung,exynos5250-usb2-phy";
+ reg = <0x12130000 0x100>;
+ #phy-cells = <1>;
+ };
+ };
+};
#include <dt-bindings/regulator/maxim,max77802.h>
#include "exynos5800.dtsi"
#include "exynos5420-cpus.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
/ {
model = "Google Peach Pi Rev 10+";
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
regulator-name = "vdd_1v35";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
- regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_2v";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
- regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-name = "vdd_ldo9";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
regulator-mode = <MAX77802_OPMODE_LP>;
regulator-name = "vdd_ldo10";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-always-on;
regulator-state-mem {
regulator-off-in-suspend;
};
status = "okay";
};
-&mfc {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
-};
-
&mmc_0 {
status = "okay";
num-slots = <1>;
status = "okay";
};
+&tmu_cpu0 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo10_reg>;
+};
+
&usbdrd_dwc3_0 {
dr_mode = "host";
};
/ {
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <6000000>;
- };
-
main_xtal {
clock-frequency = <6000000>;
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
--- /dev/null
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+ model = "SanDisk Sansa Fuze+";
+ compatible = "sandisk,sansa_fuze_plus", "fsl,imx23";
+
+ memory {
+ reg = <0x40000000 0x04000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx23-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+ bus-width = <4>;
+ vmmc-supply = <®_vddio_sd0>;
+ cd-inverted;
+ status = "okay";
+ };
+
+ ssp1: ssp@80034000 {
+ compatible = "fsl,imx23-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_8bit_pins_a>;
+ bus-width = <8>;
+ vmmc-supply = <®_vddio_sd1>;
+ non-removable;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX23_PAD_GPMI_D08__GPIO_0_8
+ MX23_PAD_PWM3__GPIO_1_29
+ MX23_PAD_AUART1_RTS__GPIO_0_27
+ MX23_PAD_AUART1_CTS__GPIO_0_26
+ MX23_PAD_I2C_SCL__I2C_SCL
+ MX23_PAD_I2C_SDA__I2C_SDA
+ MX23_PAD_LCD_DOTCK__GPIO_1_22
+ MX23_PAD_LCD_HSYNC__GPIO_1_24
+ MX23_PAD_PWM3__GPIO_1_29
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pins_a>;
+ status = "okay";
+ };
+
+ duart: serial@80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+
+ lradc@80050000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ dr_mode = "peripheral";
+ status = "okay";
+ };
+ };
+
+ reg_vddio_sd0: regulator-vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio0 8 0>;
+ };
+
+ reg_vddio_sd1: regulator-vddio-sd1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio1 29 0>;
+ };
+
+ reg_vdd_touchpad: regulator-vdd-touchpad0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-touchpad0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio0 26 0>;
+ regulator-always-on;
+ enable-active-low;
+ };
+
+ reg_vdd_tuner: regulator-vdd-tuner0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd-tuner0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio0 29 0>;
+ regulator-always-on;
+ enable-active-low;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 2 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ i2c-0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ gpios = <
+ &gpio1 24 0 /* SDA */
+ &gpio1 22 0 /* SCL */
+ >;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+ };
+
+ i2c-1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "i2c-gpio";
+ gpios = <
+ &gpio0 31 0 /* SDA */
+ &gpio0 30 0 /* SCL */
+ >;
+ i2c-gpio,delay-us = <2>; /* ~100 kHz */
+
+ touch: touch@20 {
+ compatible = "synaptics,synaptics_i2c";
+ reg = <0x20>;
+ };
+
+ eeprom: eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ pagesize = <32>;
+ };
+ };
+
+};
--- /dev/null
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+ model = "Creative ZEN X-Fi3";
+ compatible = "creative,x-fi3", "fsl,imx23";
+
+ memory {
+ reg = <0x40000000 0x04000000>;
+ };
+
+ apb@80000000 {
+ apbh@80000000 {
+ ssp0: ssp@80010000 {
+ compatible = "fsl,imx23-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+ bus-width = <4>;
+ vmmc-supply = <®_vddio_sd0>;
+ cd-inverted;
+ status = "okay";
+ };
+
+ ssp1: ssp@80034000 {
+ compatible = "fsl,imx23-mmc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_4bit_pins_a>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+ };
+
+ pinctrl@80018000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hog_pins_a>;
+
+ hog_pins_a: hog@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX23_PAD_GPMI_D07__GPIO_0_7
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ key_pins_a: keys@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX23_PAD_ROTARYA__GPIO_2_7
+ MX23_PAD_ROTARYB__GPIO_2_8
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+ };
+ };
+
+ apbx@80040000 {
+ i2c: i2c@80058000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins_a>;
+ status = "okay";
+ };
+
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pins_a>;
+ status = "okay";
+ };
+
+ duart: serial@80070000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&duart_pins_a>;
+ status = "okay";
+ };
+
+ auart1: serial@8006e000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&auart1_2pins_a>;
+ status = "okay";
+ };
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+
+ lradc@80050000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ dr_mode = "peripheral";
+ status = "okay";
+ };
+ };
+
+ reg_vddio_sd0: regulator-vddio-sd0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio0 7 0>;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 2 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&key_pins_a>;
+
+ voldown {
+ label = "volume-down";
+ linux,code = <114>;
+ gpios = <&gpio2 7 0>;
+ debounce-interval = <20>;
+ };
+
+ volup {
+ label = "volume-up";
+ linux,code = <115>;
+ gpios = <&gpio2 8 0>;
+ debounce-interval = <20>;
+ };
+ };
+};
gpio0: gpio@0 {
compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ reg = <0>;
interrupts = <16>;
gpio-controller;
#gpio-cells = <2>;
gpio1: gpio@1 {
compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ reg = <1>;
interrupts = <17>;
gpio-controller;
#gpio-cells = <2>;
gpio2: gpio@2 {
compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+ reg = <2>;
interrupts = <18>;
gpio-controller;
#gpio-cells = <2>;
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ auart1_2pins_a: auart1-2pins@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX23_PAD_GPMI_D14__AUART2_RX
+ MX23_PAD_GPMI_D15__AUART2_TX
+ >;
+ fsl,drive-strength = <MXS_DRIVE_4mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_DISABLE>;
+ };
+
gpmi_pins_a: gpmi-nand@0 {
reg = <0>;
fsl,pinmux-ids = <
fsl,pull-up = <MXS_PULL_DISABLE>;
};
+ mmc1_4bit_pins_a: mmc1-4bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX23_PAD_GPMI_D00__SSP2_DATA0
+ MX23_PAD_GPMI_D01__SSP2_DATA1
+ MX23_PAD_GPMI_D02__SSP2_DATA2
+ MX23_PAD_GPMI_D03__SSP2_DATA3
+ MX23_PAD_GPMI_RDY1__SSP2_CMD
+ MX23_PAD_GPMI_WRN__SSP2_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
+ mmc1_8bit_pins_a: mmc1-8bit@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ MX23_PAD_GPMI_D00__SSP2_DATA0
+ MX23_PAD_GPMI_D01__SSP2_DATA1
+ MX23_PAD_GPMI_D02__SSP2_DATA2
+ MX23_PAD_GPMI_D03__SSP2_DATA3
+ MX23_PAD_GPMI_D04__SSP2_DATA4
+ MX23_PAD_GPMI_D05__SSP2_DATA5
+ MX23_PAD_GPMI_D06__SSP2_DATA6
+ MX23_PAD_GPMI_D07__SSP2_DATA7
+ MX23_PAD_GPMI_RDY1__SSP2_CMD
+ MX23_PAD_GPMI_WRN__SSP2_SCK
+ >;
+ fsl,drive-strength = <MXS_DRIVE_8mA>;
+ fsl,voltage = <MXS_VOLTAGE_HIGH>;
+ fsl,pull-up = <MXS_PULL_ENABLE>;
+ };
+
pwm2_pins_a: pwm2@0 {
reg = <0>;
fsl,pinmux-ids = <
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
#define MX25_PAD_A13__GPIO_4_1 0x00c 0x22C 0x000 0x05 0x000
#define MX25_PAD_A13__LCDC_CLS 0x00c 0x22C 0x000 0x07 0x000
-#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x10 0x000
-#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x15 0x000
-#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x16 0x000
-#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x17 0x000
-
-#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x10 0x000
-#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x15 0x000
-#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x16 0x000
-#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x17 0x000
-
-#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x10 0x000
-#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x15 0x000
-#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x16 0x000
-#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x17 0x000
-
-#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x10 0x000
-#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x15 0x000
-#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x16 0x000
-#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x17 0x000
-
-#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x10 0x000
-#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x15 0x000
-#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x16 0x000
-#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x17 0x000
-
-#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x10 0x000
-#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x15 0x000
-#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x16 0x000
-#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x17 0x000
-
-#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x10 0x000
-#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x15 0x000
-#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x16 0x000
-#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x17 0x000
-
-#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x10 0x000
-#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x15 0x000
-#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x16 0x000
-#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x17 0x000
-
-#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x10 0x000
-#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x15 0x000
-#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000
-#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x16 0x000
-#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x17 0x000
-
-#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x10 0x000
-#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x15 0x000
-#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x16 0x000
-#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x17 0x000
-
-#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x10 0x000
-#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x15 0x000
-#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x16 0x000
-#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x17 0x000
-
-#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x10 0x000
-#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x15 0x000
-#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x17 0x000
-
-#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x10 0x000
-#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x14 0x000
-#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x15 0x000
-
-#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x10 0x000
-#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x14 0x000
-#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x15 0x000
-
-#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x10 0x000
-#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x14 0x000
-#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x15 0x000
+#define MX25_PAD_A14__A14 0x010 0x230 0x000 0x00 0x000
+#define MX25_PAD_A14__GPIO_2_0 0x010 0x230 0x000 0x05 0x000
+#define MX25_PAD_A14__SIM1_CLK1 0x010 0x230 0x000 0x06 0x000
+#define MX25_PAD_A14__LCDC_SPL 0x010 0x230 0x000 0x07 0x000
+
+#define MX25_PAD_A15__A15 0x014 0x234 0x000 0x00 0x000
+#define MX25_PAD_A15__GPIO_2_1 0x014 0x234 0x000 0x05 0x000
+#define MX25_PAD_A15__SIM1_RST1 0x014 0x234 0x000 0x06 0x000
+#define MX25_PAD_A15__LCDC_PS 0x014 0x234 0x000 0x07 0x000
+
+#define MX25_PAD_A16__A16 0x018 0x000 0x000 0x00 0x000
+#define MX25_PAD_A16__GPIO_2_2 0x018 0x000 0x000 0x05 0x000
+#define MX25_PAD_A16__SIM1_VEN1 0x018 0x000 0x000 0x06 0x000
+#define MX25_PAD_A16__LCDC_REV 0x018 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A17__A17 0x01c 0x238 0x000 0x00 0x000
+#define MX25_PAD_A17__GPIO_2_3 0x01c 0x238 0x000 0x05 0x000
+#define MX25_PAD_A17__SIM1_TX 0x01c 0x238 0x554 0x06 0x000
+#define MX25_PAD_A17__FEC_TX_ERR 0x01c 0x238 0x000 0x07 0x000
+
+#define MX25_PAD_A18__A18 0x020 0x23c 0x000 0x00 0x000
+#define MX25_PAD_A18__GPIO_2_4 0x020 0x23c 0x000 0x05 0x000
+#define MX25_PAD_A18__SIM1_PD1 0x020 0x23c 0x550 0x06 0x000
+#define MX25_PAD_A18__FEC_COL 0x020 0x23c 0x504 0x07 0x000
+
+#define MX25_PAD_A19__A19 0x024 0x240 0x000 0x00 0x000
+#define MX25_PAD_A19__GPIO_2_5 0x024 0x240 0x000 0x05 0x000
+#define MX25_PAD_A19__SIM1_RX1 0x024 0x240 0x54c 0x06 0x000
+#define MX25_PAD_A19__FEC_RX_ERR 0x024 0x240 0x518 0x07 0x000
+
+#define MX25_PAD_A20__A20 0x028 0x244 0x000 0x00 0x000
+#define MX25_PAD_A20__GPIO_2_6 0x028 0x244 0x000 0x05 0x000
+#define MX25_PAD_A20__SIM2_CLK1 0x028 0x244 0x000 0x06 0x000
+#define MX25_PAD_A20__FEC_RDATA2 0x028 0x244 0x50c 0x07 0x000
+
+#define MX25_PAD_A21__A21 0x02c 0x248 0x000 0x00 0x000
+#define MX25_PAD_A21__GPIO_2_7 0x02c 0x248 0x000 0x05 0x000
+#define MX25_PAD_A21__SIM2_RST1 0x02c 0x248 0x000 0x06 0x000
+#define MX25_PAD_A21__FEC_RDATA3 0x02c 0x248 0x510 0x07 0x000
+
+#define MX25_PAD_A22__A22 0x030 0x000 0x000 0x00 0x000
+#define MX25_PAD_A22__GPIO_2_8 0x030 0x000 0x000 0x05 0x000
+#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000
+#define MX25_PAD_A22__SIM2_VEN1 0x030 0x000 0x000 0x06 0x000
+#define MX25_PAD_A22__FEC_TDATA2 0x030 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A23__A23 0x034 0x24c 0x000 0x00 0x000
+#define MX25_PAD_A23__GPIO_2_9 0x034 0x24c 0x000 0x05 0x000
+#define MX25_PAD_A23__SIM2_TX1 0x034 0x24c 0x560 0x06 0x000
+#define MX25_PAD_A23__FEC_TDATA3 0x034 0x24c 0x000 0x07 0x000
+
+#define MX25_PAD_A24__A24 0x038 0x250 0x000 0x00 0x000
+#define MX25_PAD_A24__GPIO_2_10 0x038 0x250 0x000 0x05 0x000
+#define MX25_PAD_A24__SIM2_PD1 0x038 0x250 0x55c 0x06 0x000
+#define MX25_PAD_A24__FEC_RX_CLK 0x038 0x250 0x514 0x07 0x000
+
+#define MX25_PAD_A25__A25 0x03c 0x254 0x000 0x00 0x000
+#define MX25_PAD_A25__GPIO_2_11 0x03c 0x254 0x000 0x05 0x000
+#define MX25_PAD_A25__FEC_CRS 0x03c 0x254 0x508 0x07 0x000
+
+#define MX25_PAD_EB0__EB0 0x040 0x258 0x000 0x00 0x000
+#define MX25_PAD_EB0__AUD4_TXD 0x040 0x258 0x464 0x04 0x000
+#define MX25_PAD_EB0__GPIO_2_12 0x040 0x258 0x000 0x05 0x000
+
+#define MX25_PAD_EB1__EB1 0x044 0x25c 0x000 0x00 0x000
+#define MX25_PAD_EB1__AUD4_RXD 0x044 0x25c 0x460 0x04 0x000
+#define MX25_PAD_EB1__GPIO_2_13 0x044 0x25c 0x000 0x05 0x000
+
+#define MX25_PAD_OE__OE 0x048 0x260 0x000 0x00 0x000
+#define MX25_PAD_OE__AUD4_TXC 0x048 0x260 0x000 0x04 0x000
+#define MX25_PAD_OE__GPIO_2_14 0x048 0x260 0x000 0x05 0x000
#define MX25_PAD_CS0__CS0 0x04c 0x000 0x000 0x00 0x000
#define MX25_PAD_CS0__GPIO_4_2 0x04c 0x000 0x000 0x05 0x000
#define MX25_PAD_CS1__NF_CE3 0x050 0x000 0x000 0x01 0x000
#define MX25_PAD_CS1__GPIO_4_3 0x050 0x000 0x000 0x05 0x000
-#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x10 0x000
+#define MX25_PAD_CS4__CS4 0x054 0x264 0x000 0x00 0x000
#define MX25_PAD_CS4__NF_CE1 0x054 0x264 0x000 0x01 0x000
-#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x13 0x000
-#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x15 0x000
+#define MX25_PAD_CS4__UART5_CTS 0x054 0x264 0x000 0x03 0x000
+#define MX25_PAD_CS4__GPIO_3_20 0x054 0x264 0x000 0x05 0x000
#define MX25_PAD_CS5__CS5 0x058 0x268 0x000 0x00 0x000
#define MX25_PAD_CS5__NF_CE2 0x058 0x268 0x000 0x01 0x000
#define MX25_PAD_CS5__UART5_RTS 0x058 0x268 0x574 0x03 0x000
#define MX25_PAD_CS5__GPIO_3_21 0x058 0x268 0x000 0x05 0x000
-#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x10 0x000
-#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x15 0x000
+#define MX25_PAD_NF_CE0__NF_CE0 0x05c 0x26c 0x000 0x00 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22 0x05c 0x26c 0x000 0x05 0x000
-#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x10 0x000
-#define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x13 0x000
-#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x15 0x000
+#define MX25_PAD_ECB__ECB 0x060 0x270 0x000 0x00 0x000
+#define MX25_PAD_ECB__UART5_TXD 0x060 0x270 0x000 0x03 0x000
+#define MX25_PAD_ECB__GPIO_3_23 0x060 0x270 0x000 0x05 0x000
-#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x10 0x000
-#define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x13 0x000
-#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x15 0x000
+#define MX25_PAD_LBA__LBA 0x064 0x274 0x000 0x00 0x000
+#define MX25_PAD_LBA__UART5_RXD 0x064 0x274 0x578 0x03 0x000
+#define MX25_PAD_LBA__GPIO_3_24 0x064 0x274 0x000 0x05 0x000
#define MX25_PAD_BCLK__BCLK 0x068 0x000 0x000 0x00 0x000
#define MX25_PAD_BCLK__GPIO_4_4 0x068 0x000 0x000 0x05 0x000
-#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x10 0x000
-#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x14 0x000
-#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x15 0x000
+#define MX25_PAD_RW__RW 0x06c 0x278 0x000 0x00 0x000
+#define MX25_PAD_RW__AUD4_TXFS 0x06c 0x278 0x474 0x04 0x000
+#define MX25_PAD_RW__GPIO_3_25 0x06c 0x278 0x000 0x05 0x000
-#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFWE_B__NFWE_B 0x070 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26 0x070 0x000 0x000 0x05 0x000
-#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFRE_B__NFRE_B 0x074 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27 0x074 0x000 0x000 0x05 0x000
-#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFALE__NFALE 0x078 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFALE__GPIO_3_28 0x078 0x000 0x000 0x05 0x000
-#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFCLE__NFCLE 0x07c 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29 0x07c 0x000 0x000 0x05 0x000
-#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFWP_B__NFWP_B 0x080 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30 0x080 0x000 0x000 0x05 0x000
-#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x10 0x000
-#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x15 0x000
+#define MX25_PAD_NFRB__NFRB 0x084 0x27c 0x000 0x00 0x000
+#define MX25_PAD_NFRB__GPIO_3_31 0x084 0x27c 0x000 0x05 0x000
#define MX25_PAD_D15__D15 0x088 0x280 0x000 0x00 0x000
#define MX25_PAD_D15__LD16 0x088 0x280 0x000 0x01 0x000
#define MX25_PAD_D0__D0 0x0c4 0x2bc 0x000 0x00 0x000
#define MX25_PAD_D0__GPIO_4_20 0x0c4 0x2bc 0x000 0x05 0x000
-#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x10 0x000
-#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x12 0x000
-#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x15 0x000
+#define MX25_PAD_LD0__LD0 0x0c8 0x2c0 0x000 0x00 0x000
+#define MX25_PAD_LD0__CSI_D0 0x0c8 0x2c0 0x488 0x02 0x000
+#define MX25_PAD_LD0__GPIO_2_15 0x0c8 0x2c0 0x000 0x05 0x000
-#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x10 0x000
-#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x12 0x000
-#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x15 0x000
+#define MX25_PAD_LD1__LD1 0x0cc 0x2c4 0x000 0x00 0x000
+#define MX25_PAD_LD1__CSI_D1 0x0cc 0x2c4 0x48c 0x02 0x000
+#define MX25_PAD_LD1__GPIO_2_16 0x0cc 0x2c4 0x000 0x05 0x000
-#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x10 0x000
-#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x15 0x000
+#define MX25_PAD_LD2__LD2 0x0d0 0x2c8 0x000 0x00 0x000
+#define MX25_PAD_LD2__GPIO_2_17 0x0d0 0x2c8 0x000 0x05 0x000
-#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x10 0x000
-#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x15 0x000
+#define MX25_PAD_LD3__LD3 0x0d4 0x2cc 0x000 0x00 0x000
+#define MX25_PAD_LD3__GPIO_2_18 0x0d4 0x2cc 0x000 0x05 0x000
-#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x10 0x000
-#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x15 0x000
+#define MX25_PAD_LD4__LD4 0x0d8 0x2d0 0x000 0x00 0x000
+#define MX25_PAD_LD4__GPIO_2_19 0x0d8 0x2d0 0x000 0x05 0x000
-#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x10 0x000
-#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x15 0x000
+#define MX25_PAD_LD5__LD5 0x0dc 0x2d4 0x000 0x00 0x000
+#define MX25_PAD_LD5__GPIO_1_19 0x0dc 0x2d4 0x000 0x05 0x000
-#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x10 0x000
-#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x15 0x000
+#define MX25_PAD_LD6__LD6 0x0e0 0x2d8 0x000 0x00 0x000
+#define MX25_PAD_LD6__GPIO_1_20 0x0e0 0x2d8 0x000 0x05 0x000
-#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x10 0x000
-#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x15 0x000
+#define MX25_PAD_LD7__LD7 0x0e4 0x2dc 0x000 0x00 0x000
+#define MX25_PAD_LD7__GPIO_1_21 0x0e4 0x2dc 0x000 0x05 0x000
-#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x10 0x000
-#define MX25_PAD_LD8__UART4_RXD 0x0e8 0x2e0 0x570 0x12 0x000
-#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x15 0x000
+#define MX25_PAD_LD8__LD8 0x0e8 0x2e0 0x000 0x00 0x000
+#define MX25_PAD_LD8__UART4_RXD 0x0e8 0x2e0 0x570 0x02 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR 0x0e8 0x2e0 0x000 0x05 0x000
#define MX25_PAD_LD8__SDHC2_CMD 0x0e8 0x2e0 0x4e0 0x06 0x000
-#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x10 0x000
-#define MX25_PAD_LD9__UART4_TXD 0x0ec 0x2e4 0x000 0x12 0x000
-#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x15 0x001
+#define MX25_PAD_LD9__LD9 0x0ec 0x2e4 0x000 0x00 0x000
+#define MX25_PAD_LD9__UART4_TXD 0x0ec 0x2e4 0x000 0x02 0x000
+#define MX25_PAD_LD9__FEC_COL 0x0ec 0x2e4 0x504 0x05 0x001
#define MX25_PAD_LD9__SDHC2_CLK 0x0ec 0x2e4 0x4dc 0x06 0x000
#define MX25_PAD_LD10__LD10 0x0f0 0x2e8 0x000 0x00 0x000
#define MX25_PAD_LD10__UART4_RTS 0x0f0 0x2e8 0x56c 0x02 0x000
#define MX25_PAD_LD10__FEC_RX_ERR 0x0f0 0x2e8 0x518 0x05 0x001
-#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x10 0x000
-#define MX25_PAD_LD11__UART4_CTS 0x0f4 0x2ec 0x000 0x12 0x000
-#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x15 0x001
+#define MX25_PAD_LD11__LD11 0x0f4 0x2ec 0x000 0x00 0x000
+#define MX25_PAD_LD11__UART4_CTS 0x0f4 0x2ec 0x000 0x02 0x000
+#define MX25_PAD_LD11__FEC_RDATA2 0x0f4 0x2ec 0x50c 0x05 0x001
#define MX25_PAD_LD11__SDHC2_DAT1 0x0f4 0x2ec 0x4e8 0x06 0x000
-#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__LD12 0x0f8 0x2f0 0x000 0x00 0x000
#define MX25_PAD_LD12__CSPI2_MOSI 0x0f8 0x2f0 0x4a0 0x02 0x000
-#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x15 0x001
+#define MX25_PAD_LD12__FEC_RDATA3 0x0f8 0x2f0 0x510 0x05 0x001
-#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__LD13 0x0fc 0x2f4 0x000 0x00 0x000
#define MX25_PAD_LD13__CSPI2_MISO 0x0fc 0x2f4 0x49c 0x02 0x000
-#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x15 0x000
+#define MX25_PAD_LD13__FEC_TDATA2 0x0fc 0x2f4 0x000 0x05 0x000
-#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__LD14 0x100 0x2f8 0x000 0x00 0x000
#define MX25_PAD_LD14__CSPI2_SCLK 0x100 0x2f8 0x494 0x02 0x000
-#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x15 0x000
+#define MX25_PAD_LD14__FEC_TDATA3 0x100 0x2f8 0x000 0x05 0x000
-#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__LD15 0x104 0x2fc 0x000 0x00 0x000
#define MX25_PAD_LD15__CSPI2_RDY 0x104 0x2fc 0x498 0x02 0x000
-#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x15 0x001
+#define MX25_PAD_LD15__FEC_RX_CLK 0x104 0x2fc 0x514 0x05 0x001
-#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x10 0x000
-#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x15 0x000
+#define MX25_PAD_HSYNC__HSYNC 0x108 0x300 0x000 0x00 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22 0x108 0x300 0x000 0x05 0x000
-#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x10 0x000
-#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x15 0x000
+#define MX25_PAD_VSYNC__VSYNC 0x10c 0x304 0x000 0x00 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23 0x10c 0x304 0x000 0x05 0x000
-#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x10 0x000
-#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x15 0x000
+#define MX25_PAD_LSCLK__LSCLK 0x110 0x308 0x000 0x00 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24 0x110 0x308 0x000 0x05 0x000
-#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__OE_ACD 0x114 0x30c 0x000 0x00 0x000
#define MX25_PAD_OE_ACD__CSPI2_SS0 0x114 0x30c 0x4a4 0x02 0x000
-#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x15 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25 0x114 0x30c 0x000 0x05 0x000
-#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x10 0x000
-#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x11 0x000
-#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x14 0x000
-#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x15 0x001
-#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x16 0x000
+#define MX25_PAD_CONTRAST__CONTRAST 0x118 0x310 0x000 0x00 0x000
+#define MX25_PAD_CONTRAST__CC4 0x118 0x310 0x000 0x01 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO 0x118 0x310 0x000 0x04 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS 0x118 0x310 0x508 0x05 0x001
+#define MX25_PAD_CONTRAST__USBH2_PWR 0x118 0x310 0x000 0x06 0x000
-#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x10 0x000
-#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x15 0x000
-#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x16 0x001
+#define MX25_PAD_PWM__PWM 0x11c 0x314 0x000 0x00 0x000
+#define MX25_PAD_PWM__GPIO_1_26 0x11c 0x314 0x000 0x05 0x000
+#define MX25_PAD_PWM__USBH2_OC 0x11c 0x314 0x580 0x06 0x001
-#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x10 0x000
-#define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__CSI_D2 0x120 0x318 0x000 0x00 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD 0x120 0x318 0x578 0x01 0x001
#define MX25_PAD_CSI_D2__SIM1_CLK0 0x120 0x318 0x000 0x04 0x000
-#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x15 0x000
-#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x17 0x000
+#define MX25_PAD_CSI_D2__GPIO_1_27 0x120 0x318 0x000 0x05 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI 0x120 0x318 0x000 0x07 0x000
-#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x11 0x000
+#define MX25_PAD_CSI_D3__CSI_D3 0x124 0x31c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D3__UART5_TXD 0x124 0x31c 0x000 0x01 0x000
#define MX25_PAD_CSI_D3__SIM1_RST0 0x124 0x31c 0x000 0x04 0x000
-#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x15 0x000
-#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x17 0x001
+#define MX25_PAD_CSI_D3__GPIO_1_28 0x124 0x31c 0x000 0x05 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO 0x124 0x31c 0x4b4 0x07 0x001
#define MX25_PAD_CSI_D4__CSI_D4 0x128 0x320 0x000 0x00 0x000
#define MX25_PAD_CSI_D4__UART5_RTS 0x128 0x320 0x574 0x01 0x001
#define MX25_PAD_CSI_D4__GPIO_1_29 0x128 0x320 0x000 0x05 0x000
#define MX25_PAD_CSI_D4__CSPI3_SCLK 0x128 0x320 0x000 0x07 0x000
-#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x10 0x000
-#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x11 0x000
+#define MX25_PAD_CSI_D5__CSI_D5 0x12c 0x324 0x000 0x00 0x000
+#define MX25_PAD_CSI_D5__UART5_CTS 0x12c 0x324 0x000 0x01 0x000
#define MX25_PAD_CSI_D5__SIM1_TX0 0x12c 0x324 0x000 0x04 0x000
-#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x15 0x000
-#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x17 0x000
+#define MX25_PAD_CSI_D5__GPIO_1_30 0x12c 0x324 0x000 0x05 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY 0x12c 0x324 0x000 0x07 0x000
-#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x10 0x000
-#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x12 0x001
+#define MX25_PAD_CSI_D6__CSI_D6 0x130 0x328 0x000 0x00 0x000
+#define MX25_PAD_CSI_D6__SDHC2_CMD 0x130 0x328 0x4e0 0x02 0x001
#define MX25_PAD_CSI_D6__SIM1_PD0 0x130 0x328 0x000 0x04 0x000
-#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x15 0x000
+#define MX25_PAD_CSI_D6__GPIO_1_31 0x130 0x328 0x000 0x05 0x000
-#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x12 0x001
-#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x15 0x000
+#define MX25_PAD_CSI_D7__CSI_D7 0x134 0x32c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK 0x134 0x32C 0x4dc 0x02 0x001
+#define MX25_PAD_CSI_D7__GPIO_1_6 0x134 0x32c 0x000 0x05 0x000
-#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x10 0x000
-#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x12 0x000
-#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x15 0x000
-#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x17 0x000
+#define MX25_PAD_CSI_D8__CSI_D8 0x138 0x330 0x000 0x00 0x000
+#define MX25_PAD_CSI_D8__AUD6_RXC 0x138 0x330 0x000 0x02 0x000
+#define MX25_PAD_CSI_D8__GPIO_1_7 0x138 0x330 0x000 0x05 0x000
+#define MX25_PAD_CSI_D8__CSPI3_SS2 0x138 0x330 0x4c4 0x07 0x000
-#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x10 0x000
-#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x12 0x000
-#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x15 0x000
-#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x17 0x000
+#define MX25_PAD_CSI_D9__CSI_D9 0x13c 0x334 0x000 0x00 0x000
+#define MX25_PAD_CSI_D9__AUD6_RXFS 0x13c 0x334 0x000 0x02 0x000
+#define MX25_PAD_CSI_D9__GPIO_4_21 0x13c 0x334 0x000 0x05 0x000
+#define MX25_PAD_CSI_D9__CSPI3_SS3 0x13c 0x334 0x4c8 0x07 0x000
-#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x10 0x000
-#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x11 0x000
-#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x12 0x001
-#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x15 0x000
+#define MX25_PAD_CSI_MCLK__CSI_MCLK 0x140 0x338 0x000 0x00 0x000
+#define MX25_PAD_CSI_MCLK__AUD6_TXD 0x140 0x338 0x000 0x01 0x000
+#define MX25_PAD_CSI_MCLK__SDHC2_DAT0 0x140 0x338 0x4e4 0x02 0x001
+#define MX25_PAD_CSI_MCLK__GPIO_1_8 0x140 0x338 0x000 0x05 0x000
-#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x10 0x000
-#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x11 0x000
-#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x12 0x001
-#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x15 0x000
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC 0x144 0x33c 0x000 0x00 0x000
+#define MX25_PAD_CSI_VSYNC__AUD6_RXD 0x144 0x33c 0x000 0x01 0x000
+#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1 0x144 0x33c 0x4e8 0x02 0x001
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9 0x144 0x33c 0x000 0x05 0x000
-#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x10 0x000
-#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x11 0x000
-#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x12 0x001
-#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x15 0x000
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC 0x148 0x340 0x000 0x00 0x000
+#define MX25_PAD_CSI_HSYNC__AUD6_TXC 0x148 0x340 0x000 0x01 0x000
+#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2 0x148 0x340 0x4ec 0x02 0x001
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10 0x148 0x340 0x000 0x05 0x000
-#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x10 0x000
-#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x11 0x000
-#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x12 0x001
-#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x15 0x000
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK 0x14c 0x344 0x000 0x00 0x000
+#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS 0x14c 0x344 0x000 0x01 0x000
+#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3 0x14c 0x344 0x4f0 0x02 0x001
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11 0x14c 0x344 0x000 0x05 0x000
-#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x10 0x000
-#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x15 0x000
+#define MX25_PAD_I2C1_CLK__I2C1_CLK 0x150 0x348 0x000 0x00 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12 0x150 0x348 0x000 0x05 0x000
-#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x10 0x000
-#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x15 0x000
+#define MX25_PAD_I2C1_DAT__I2C1_DAT 0x154 0x34c 0x000 0x00 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13 0x154 0x34c 0x000 0x05 0x000
-#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x568 0x12 0x000
-#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x15 0x000
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI 0x158 0x350 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MOSI__UART3_RXD 0x158 0x350 0x568 0x02 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14 0x158 0x350 0x000 0x05 0x000
-#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MISO__UART3_TXD 0x15c 0x354 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x15 0x000
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO 0x15c 0x354 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MISO__UART3_TXD 0x15c 0x354 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15 0x15c 0x354 0x000 0x05 0x000
-#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x15 0x000
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0 0x160 0x358 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SS0__PWM2_PWMO 0x160 0x358 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16 0x160 0x358 0x000 0x05 0x000
#define MX25_PAD_CSPI1_SS1__CSPI1_SS1 0x164 0x35c 0x000 0x00 0x000
#define MX25_PAD_CSPI1_SS1__I2C3_DAT 0x164 0x35C 0x528 0x01 0x001
#define MX25_PAD_CSPI1_SS1__UART3_RTS 0x164 0x35c 0x000 0x02 0x000
#define MX25_PAD_CSPI1_SS1__GPIO_1_17 0x164 0x35c 0x000 0x05 0x000
-#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x15 0x000
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK 0x168 0x360 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SCLK__UART3_CTS 0x168 0x360 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18 0x168 0x360 0x000 0x05 0x000
-#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x15 0x000
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY 0x16c 0x364 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22 0x16c 0x364 0x000 0x05 0x000
#define MX25_PAD_UART1_RXD__UART1_RXD 0x170 0x368 0x000 0x00 0x000
#define MX25_PAD_UART1_RXD__UART2_DTR 0x170 0x368 0x000 0x03 0x000
#define MX25_PAD_UART1_CTS__UART2_RI 0x17c 0x374 0x000 0x03 0x001
#define MX25_PAD_UART1_CTS__GPIO_4_25 0x17c 0x374 0x000 0x05 0x000
-#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x10 0x000
-#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x15 0x000
+#define MX25_PAD_UART2_RXD__UART2_RXD 0x180 0x378 0x000 0x00 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26 0x180 0x378 0x000 0x05 0x000
-#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x10 0x000
-#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x15 0x000
+#define MX25_PAD_UART2_TXD__UART2_TXD 0x184 0x37c 0x000 0x00 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27 0x184 0x37c 0x000 0x05 0x000
#define MX25_PAD_UART2_RTS__UART2_RTS 0x188 0x380 0x000 0x00 0x000
#define MX25_PAD_UART2_RTS__FEC_COL 0x188 0x380 0x504 0x02 0x002
#define MX25_PAD_UART2_RTS__CC1 0x188 0x380 0x000 0x03 0x000
#define MX25_PAD_UART2_RTS__GPIO_4_28 0x188 0x380 0x000 0x05 0x000
-#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x10 0x000
-#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x12 0x002
-#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x15 0x000
+#define MX25_PAD_UART2_CTS__UART2_CTS 0x18c 0x384 0x000 0x00 0x000
+#define MX25_PAD_UART2_CTS__FEC_RX_ERR 0x18c 0x384 0x518 0x02 0x002
+#define MX25_PAD_UART2_CTS__GPIO_4_29 0x18c 0x384 0x000 0x05 0x000
+/*
+ * Removing the SION bit from MX25_PAD_SD1_CMD__SD1_CMD breaks detecting an SD
+ * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
+ * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
+ * bug that configuring the SD1_CMD function doesn't enable the input path for
+ * this pin.
+ * This might have side effects for other hardware units that are connected to
+ * that pin and use the respective function as input.
+ */
#define MX25_PAD_SD1_CMD__SD1_CMD 0x190 0x388 0x000 0x10 0x000
-#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x11 0x001
-#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x12 0x002
-#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x15 0x000
+#define MX25_PAD_SD1_CMD__CSPI2_MOSI 0x190 0x388 0x4a0 0x01 0x001
+#define MX25_PAD_SD1_CMD__FEC_RDATA2 0x190 0x388 0x50c 0x02 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23 0x190 0x388 0x000 0x05 0x000
-#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x10 0x000
-#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x11 0x001
-#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x12 0x002
-#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x15 0x000
+#define MX25_PAD_SD1_CLK__SD1_CLK 0x194 0x38c 0x000 0x00 0x000
+#define MX25_PAD_SD1_CLK__CSPI2_MISO 0x194 0x38c 0x49c 0x01 0x001
+#define MX25_PAD_SD1_CLK__FEC_RDATA3 0x194 0x38c 0x510 0x02 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24 0x194 0x38c 0x000 0x05 0x000
-#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x11 0x001
-#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x15 0x000
+#define MX25_PAD_SD1_DATA0__SD1_DATA0 0x198 0x390 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA0__CSPI2_SCLK 0x198 0x390 0x494 0x01 0x001
+#define MX25_PAD_SD1_DATA0__GPIO_2_25 0x198 0x390 0x000 0x05 0x000
-#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x13 0x000
-#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x15 0x000
+#define MX25_PAD_SD1_DATA1__SD1_DATA1 0x19c 0x394 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA1__AUD7_RXD 0x19c 0x394 0x478 0x03 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26 0x19c 0x394 0x000 0x05 0x000
-#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x12 0x002
-#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x15 0x000
+#define MX25_PAD_SD1_DATA2__SD1_DATA2 0x1a0 0x398 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK 0x1a0 0x398 0x514 0x02 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27 0x1a0 0x398 0x000 0x05 0x000
-#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x12 0x002
-#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x15 0x000
+#define MX25_PAD_SD1_DATA3__SD1_DATA3 0x1a4 0x39c 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA3__FEC_CRS 0x1a4 0x39c 0x508 0x02 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28 0x1a4 0x39c 0x000 0x05 0x000
#define MX25_PAD_KPP_ROW0__KPP_ROW0 0x1a8 0x3a0 0x000 0x00 0x000
#define MX25_PAD_KPP_ROW0__UART3_RXD 0x1a8 0x3a0 0x568 0x01 0x001
#define MX25_PAD_KPP_ROW3__UART1_RI 0x1b4 0x3ac 0x000 0x04 0x000
#define MX25_PAD_KPP_ROW3__GPIO_3_0 0x1b4 0x3ac 0x000 0x05 0x000
-#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL0__UART4_RXD 0x1b8 0x3b0 0x570 0x11 0x001
-#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x15 0x000
+#define MX25_PAD_KPP_COL0__KPP_COL0 0x1b8 0x3b0 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD 0x1b8 0x3b0 0x570 0x01 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD 0x1b8 0x3b0 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1 0x1b8 0x3b0 0x000 0x05 0x000
-#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL1__UART4_TXD 0x1bc 0x3b4 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x15 0x000
+#define MX25_PAD_KPP_COL1__KPP_COL1 0x1bc 0x3b4 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD 0x1bc 0x3b4 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD 0x1bc 0x3b4 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2 0x1bc 0x3b4 0x000 0x05 0x000
#define MX25_PAD_KPP_COL2__KPP_COL2 0x1c0 0x3b8 0x000 0x00 0x000
#define MX25_PAD_KPP_COL2__UART4_RTS 0x1c0 0x3b8 0x56c 0x01 0x001
#define MX25_PAD_KPP_COL2__AUD5_TXC 0x1c0 0x3b8 0x000 0x02 0x000
#define MX25_PAD_KPP_COL2__GPIO_3_3 0x1c0 0x3b8 0x000 0x05 0x000
-#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x15 0x000
+#define MX25_PAD_KPP_COL3__KPP_COL3 0x1c4 0x3bc 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS 0x1c4 0x3bc 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS 0x1c4 0x3bc 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4 0x1c4 0x3bc 0x000 0x05 0x000
-#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x12 0x001
-#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x15 0x000
+#define MX25_PAD_FEC_MDC__FEC_MDC 0x1c8 0x3c0 0x000 0x00 0x000
+#define MX25_PAD_FEC_MDC__AUD4_TXD 0x1c8 0x3c0 0x464 0x02 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5 0x1c8 0x3c0 0x000 0x05 0x000
-#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x12 0x001
-#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x15 0x000
+#define MX25_PAD_FEC_MDIO__FEC_MDIO 0x1cc 0x3c4 0x000 0x00 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD 0x1cc 0x3c4 0x460 0x02 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6 0x1cc 0x3c4 0x000 0x05 0x000
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x15 0x000
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x1d0 0x3c8 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7 0x1d0 0x3c8 0x000 0x05 0x000
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x12 0x001
-#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x15 0x000
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x1d4 0x3cc 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS 0x1d4 0x3cc 0x474 0x02 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8 0x1d4 0x3cc 0x000 0x05 0x000
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x15 0x000
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x1d8 0x3d0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9 0x1d8 0x3d0 0x000 0x05 0x000
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x10 0x000
-#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x15 0x000
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x1dc 0x3d4 0x000 0x00 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10 0x1dc 0x3d4 0x000 0x05 0x000
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x10 0x000
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x1e0 0x3d8 0x000 0x00 0x000
/*
* According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
* 01/2011) this is CAN1_TX but that's wrong.
*/
-#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x14 0x000
-#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x15 0x000
+#define MX25_PAD_FEC_RDATA1__CAN2_TX 0x1e0 0x3d8 0x000 0x04 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11 0x1e0 0x3d8 0x000 0x05 0x000
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x10 0x000
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x1e4 0x3dc 0x000 0x00 0x000
/*
* According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
* 01/2011) this is CAN1_RX but that's wrong.
*/
-#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x14 0x000
-#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x15 0x000
+#define MX25_PAD_FEC_RX_DV__CAN2_RX 0x1e4 0x3dc 0x484 0x04 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12 0x1e4 0x3dc 0x000 0x05 0x000
-#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x15 0x000
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1e8 0x3e0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13 0x1e8 0x3e0 0x000 0x05 0x000
-#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x10 0x000
-#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x11 0x000
-#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x15 0x000
+#define MX25_PAD_RTCK__RTCK 0x1ec 0x3e4 0x000 0x00 0x000
+#define MX25_PAD_RTCK__OWIRE 0x1ec 0x3e4 0x000 0x01 0x000
+#define MX25_PAD_RTCK__GPIO_3_14 0x1ec 0x3e4 0x000 0x05 0x000
-#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x10 0x000
-#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x15 0x000
+#define MX25_PAD_DE_B__DE_B 0x1f0 0x3ec 0x000 0x00 0x000
+#define MX25_PAD_DE_B__GPIO_2_20 0x1f0 0x3ec 0x000 0x05 0x000
-#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x10 0x000
-#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x16 0x000
-#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x12 0x000
+#define MX25_PAD_GPIO_A__GPIO_A 0x1f4 0x3f0 0x000 0x00 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX 0x1f4 0x3f0 0x000 0x06 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR 0x1f4 0x3f0 0x000 0x02 0x000
-#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x10 0x000
-#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x12 0x001
-#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x16 0x001
+#define MX25_PAD_GPIO_B__GPIO_B 0x1f8 0x3f4 0x000 0x00 0x000
+#define MX25_PAD_GPIO_B__USBOTG_OC 0x1f8 0x3f4 0x57c 0x02 0x001
+#define MX25_PAD_GPIO_B__CAN1_RX 0x1f8 0x3f4 0x480 0x06 0x001
-#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x10 0x000
-#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x11 0x000
-#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x12 0x001
-#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x13 0x001
-#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x16 0x000
+#define MX25_PAD_GPIO_C__GPIO_C 0x1fc 0x3f8 0x000 0x00 0x000
+#define MX25_PAD_GPIO_C__PWM4_PWMO 0x1fc 0x3f8 0x000 0x01 0x000
+#define MX25_PAD_GPIO_C__I2C2_SCL 0x1fc 0x3f8 0x51c 0x02 0x001
+#define MX25_PAD_GPIO_C__KPP_COL4 0x1fc 0x3f8 0x52c 0x03 0x001
+#define MX25_PAD_GPIO_C__CAN2_TX 0x1fc 0x3f8 0x000 0x06 0x000
-#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x10 0x000
-#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x12 0x001
-#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x16 0x001
+#define MX25_PAD_GPIO_D__GPIO_D 0x200 0x3fc 0x000 0x00 0x000
+#define MX25_PAD_GPIO_D__I2C2_SDA 0x200 0x3fc 0x520 0x02 0x001
+#define MX25_PAD_GPIO_D__CAN2_RX 0x200 0x3fc 0x484 0x06 0x001
-#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x10 0x000
-#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x11 0x002
-#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x12 0x000
-#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x14 0x000
-#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x16 0x002
+#define MX25_PAD_GPIO_E__GPIO_E 0x204 0x400 0x000 0x00 0x000
+#define MX25_PAD_GPIO_E__I2C3_CLK 0x204 0x400 0x524 0x01 0x002
+#define MX25_PAD_GPIO_E__LD16 0x204 0x400 0x000 0x02 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD 0x204 0x400 0x000 0x04 0x000
+#define MX25_PAD_GPIO_E__UART4_RXD 0x204 0x400 0x570 0x06 0x002
-#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x10 0x000
-#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x12 0x000
-#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x14 0x000
-#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x16 0x000
+#define MX25_PAD_GPIO_F__GPIO_F 0x208 0x404 0x000 0x00 0x000
+#define MX25_PAD_GPIO_F__LD17 0x208 0x404 0x000 0x02 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC 0x208 0x404 0x000 0x04 0x000
+#define MX25_PAD_GPIO_F__UART4_TXD 0x208 0x404 0x000 0x06 0x000
-#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x10 0x000
-#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x15 0x000
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK 0x20c 0x000 0x000 0x00 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15 0x20c 0x000 0x000 0x05 0x000
-#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x10 0x000
-#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x15 0x000
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK 0x210 0x000 0x000 0x00 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16 0x210 0x000 0x000 0x05 0x000
#define MX25_PAD_VSTBY_REQ__VSTBY_REQ 0x214 0x408 0x000 0x00 0x000
#define MX25_PAD_VSTBY_REQ__AUD7_TXFS 0x214 0x408 0x000 0x04 0x000
#define MX25_PAD_VSTBY_REQ__GPIO_3_17 0x214 0x408 0x000 0x05 0x000
#define MX25_PAD_VSTBY_REQ__UART4_RTS 0x214 0x408 0x56c 0x06 0x002
-#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x10 0x000
-#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x15 0x000
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK 0x218 0x40c 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18 0x218 0x40c 0x000 0x05 0x000
-#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x10 0x000
-#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x14 0x001
-#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x15 0x000
-#define MX25_PAD_POWER_FAIL__UART4_CTS 0x21c 0x410 0x000 0x16 0x000
+#define MX25_PAD_POWER_FAIL__POWER_FAIL 0x21c 0x410 0x000 0x00 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD 0x21c 0x410 0x478 0x04 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19 0x21c 0x410 0x000 0x05 0x000
+#define MX25_PAD_POWER_FAIL__UART4_CTS 0x21c 0x410 0x000 0x06 0x000
-#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x10 0x000
-#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x15 0x000
+#define MX25_PAD_CLKO__CLKO 0x220 0x414 0x000 0x00 0x000
+#define MX25_PAD_CLKO__GPIO_2_21 0x220 0x414 0x000 0x05 0x000
#define MX25_PAD_BOOT_MODE0__BOOT_MODE0 0x224 0x000 0x000 0x00 0x000
#define MX25_PAD_BOOT_MODE0__GPIO_4_30 0x224 0x000 0x000 0x05 0x000
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
};
&uart1 {
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&uart1 {
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart1 {
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&uart1 {
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
auart0: serial@8006a000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_pins_a>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
};
- onewire@0 {
+ onewire {
compatible = "w1-gpio";
pinctrl-names = "default";
pinctrl-0 = <&w1_gpio_pins>;
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
reg_lcd_3v3: regulator@1 {
compatible = "regulator-fixed";
+ reg = <1>;
pinctrl-names = "default";
pinctrl-0 = <®_lcd_3v3_pins_mbmx28lc>;
regulator-name = "lcd-3v3";
reg_usb0_vbus: regulator@2 {
compatible = "regulator-fixed";
+ reg = <2>;
pinctrl-names = "default";
pinctrl-0 = <®_usb0_vbus_pins_mbmx28lc>;
regulator-name = "usb0_vbus";
reg_usb1_vbus: regulator@3 {
compatible = "regulator-fixed";
+ reg = <3>;
pinctrl-names = "default";
pinctrl-0 = <®_usb1_vbus_pins_mbmx28lc>;
regulator-name = "usb1_vbus";
auart0: serial@8006a000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_pins_a>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
default-brightness-level = <50>;
};
- matrix_keypad: matrix-keypad@0 {
+ matrix_keypad: matrix-keypad {
compatible = "gpio-matrix-keypad";
col-gpios = <
&gpio5 0 GPIO_ACTIVE_HIGH
gpio0: gpio@0 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ reg = <0>;
interrupts = <127>;
gpio-controller;
#gpio-cells = <2>;
gpio1: gpio@1 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ reg = <1>;
interrupts = <126>;
gpio-controller;
#gpio-cells = <2>;
gpio2: gpio@2 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ reg = <2>;
interrupts = <125>;
gpio-controller;
#gpio-cells = <2>;
gpio3: gpio@3 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ reg = <3>;
interrupts = <124>;
gpio-controller;
#gpio-cells = <2>;
gpio4: gpio@4 {
compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+ reg = <4>;
interrupts = <123>;
gpio-controller;
#gpio-cells = <2>;
};
&uart5 {
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
reg = <0x12000 0x1000>;
syscon = <&syscon 0x10 6>;
};
+
+ fpga_irqc: fpga-irqc@15000 {
+ compatible = "technologic,ts4800-irqc";
+ reg = <0x15000 0x1000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_interrupt_fpga>;
+ interrupt-parent = <&gpio2>;
+ interrupts= <9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ can@1a000 {
+ compatible = "technologic,sja1000";
+ reg = <0x1a000 0x100>;
+ interrupt-parent = <&fpga_irqc>;
+ interrupts = <1>;
+ reg-io-width = <2>;
+ nxp,tx-output-config = <0x06>;
+ nxp,external-clock-frequency = <24000000>;
+ };
};
};
>;
};
+ pinctrl_interrupt_fpga: fpgaicgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_D27__GPIO2_9 0xe5
+ >;
+ };
+
pinctrl_lcd: lcdgrp {
fsl,pins = <
MX51_PAD_DISP1_DAT0__DISP1_DAT0 0x5
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "disabled";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
phy-reset-gpios = <&gpio3 31 0>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
status = "okay";
};
reg = <0>;
lcd_display_in: endpoint {
- remote-endpoint = <&ipu1_di0_disp1>;
+ remote-endpoint = <&ipu1_di1_disp1>;
};
};
};
};
-&ipu1_di0_disp1 {
+&ipu1_di1_disp1 {
remote-endpoint = <&lcd_display_in>;
};
phy-mode = "rgmii";
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
status = "okay";
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
fsl,dte-mode;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
};
};
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+
reg_wl18xx_vmmc: regulator-wl18xx {
compatible = "regulator-fixed";
regulator-name = "vwl1807";
*
* Author: Valentin Raevsky <valentin@compulab.co.il>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx6q.dtsi"
/ {
linux,default-trigger = "heartbeat";
};
};
+
+ reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-pcie-power-on-gpio";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_h1_vbus: usb_h1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: usb_otg_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&cpu0 {
+ /*
+ * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+ * the module behaves unstable at this frequency. Hence, remove the
+ * 1.2GHz operation point here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <2>;
+ cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
};
&fec {
status = "okay";
};
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+ clock-frequency = <100000>;
+
+ eeprom@50 {
+ compatible = "at24,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+};
+
&iomuxc {
- imx6q-cm-fx6 {
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
- >;
- };
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x100b1
+ >;
+ };
- pinctrl_gpmi_nand: gpminandgrp {
- fsl,pins = <
- MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
- MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
- MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
- MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
- MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
- MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
- MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
- MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
- MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
- MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
- MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
- MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
- MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
- MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
- MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
- MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
- MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
- >;
- };
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
- >;
- };
+ pinctrl_gpmi_nand: gpminandgrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+ MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+ MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
};
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0
+ >;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
+ vdd-supply = <®_pcie_power_on_gpio>;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
};
&uart4 {
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ dr_mode = "otg";
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-microsom.dtsi"
+#include "imx6qdl-microsom-ar8035.dtsi"
+
+/ {
+ model = "Auvidea H100";
+ compatible = "auvidea,h100", "fsl,imx6q";
+
+ aliases {
+ rtc0 = &rtc;
+ rtc1 = &snvs_rtc;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ hdmi_osc: hdmi-osc {
+ compatible = "fixed-clock";
+ clock-output-names = "hdmi-osc";
+ clock-frequency = <27000000>;
+ #clock-cells = <0>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_leds>;
+
+ led0: power {
+ label = "power";
+ gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led1: stream {
+ label = "stream";
+ gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ led2: rec {
+ label = "rec";
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_hdmi: regulator-hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ regulator-name = "V_HDMI";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_nvcc_sd2: regulator-nvcc-sd2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_reg_nvcc_sd2>;
+ compatible = "regulator-gpio";
+ regulator-name = "NVCC_SD2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-type = "voltage";
+ regulator-boot-on;
+ regulator-always-on;
+ gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+ states = <1800000 0x1
+ 3300000 0x0>;
+ };
+
+ reg_usbh1_vbus: regulator-usb-h1-vbus {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
+ regulator-name = "USB_H1_VBUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ reg_usbotg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
+ regulator-name = "USB_OTG_VBUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ sound-sgtl5000 {
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "H100 on-board codec";
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-ext-port = <5>;
+ mux-int-port = <1>;
+ ssi-controller = <&ssi1>;
+ };
+};
+
+&audmux {
+ status = "okay";
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_hdmi>;
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_i2c1>;
+ status = "okay";
+
+ eeprom: 24c02@51 {
+ compatible = "microchip,24c02", "at24";
+ reg = <0x51>;
+ };
+
+ rtc: pcf8523@68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+
+ sgtl5000: sgtl5000@0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_sgtl5000>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+
+ tc358743: tc358743@0f {
+ compatible = "toshiba,tc358743";
+ reg = <0x0f>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_tc358743>;
+ clocks = <&hdmi_osc>;
+ clock-names = "refclk";
+ reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+ /* IRQ has a wrong pull resistor which renders it useless */
+
+ port@0 {
+ tc358743_out: endpoint {
+ remote-endpoint = <&mipi_csi2_in>;
+ data-lanes = <1 2 3 4>;
+ clock-lanes = <0>;
+ clock-noncontinuous;
+ link-frequencies = /bits/ 64 <297000000>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_i2c2>;
+ status = "okay";
+};
+
+&iomuxc {
+ h100 {
+ pinctrl_h100_hdmi: h100-hdmi {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
+ pinctrl_h100_i2c1: h100-i2c1 {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_h100_i2c2: h100-i2c2 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_h100_leds: pinctrl-h100-leds {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b0
+ MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x1b0b0
+ MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x1b0b0
+ >;
+ };
+
+ pinctrl_h100_reg_hdmi: h100-reg-hdmi {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b0
+ >;
+ };
+
+ pinctrl_h100_reg_nvcc_sd2: h100-reg-nvcc-sd2 {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_h100_sgtl5000: h100-sgtl5000 {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+ MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+ MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+ MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+ >;
+ };
+
+ pinctrl_h100_tc358743: h100-tc358743 {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+ >;
+ };
+
+ pinctrl_h100_uart2: h100-uart2 {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
+ >;
+ };
+
+ pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+
+ pinctrl_h100_usdhc2: h100-usdhc2 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+ >;
+ };
+
+ pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ >;
+ };
+ };
+};
+
+&mipi_csi {
+ status = "okay";
+
+ port@0 {
+ mipi_csi2_in: endpoint {
+ remote-endpoint = <&tc358743_out>;
+ data-lanes = <1 2 3 4>;
+ clock-lanes = <0>;
+ clock-noncontinuous;
+ link-frequencies = /bits/ 64 <297000000>;
+ };
+ };
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ disable-over-current;
+ vbus-supply = <®_usbh1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ disable-over-current;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_h100_usbotg_id>;
+ vbus-supply = <®_usbotg_vbus>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_h100_usdhc2>;
+ pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
+ vmmc-supply = <®_3p3v>;
+ vqmmc-supply = <®_nvcc_sd2>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
- reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
status = "okay";
};
--- /dev/null
+/*
+ * Copyright 2013 CompuLab Ltd.
+ * Copyright 2016 Christopher Spinrath
+ *
+ * Based on the devicetree distributed with the vendor kernel for the
+ * Utilite Pro:
+ * Copyright 2013 CompuLab Ltd.
+ * Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include "imx6q-cm-fx6.dts"
+
+/ {
+ model = "CompuLab Utilite Pro";
+ compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q";
+
+ aliases {
+ ethernet1 = ð1;
+ rtc0 = &em3027;
+ rtc1 = &snvs_rtc;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+ };
+};
+
+&hdmi {
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "at24,24c02";
+ reg = <0x50>;
+ pagesize = <16>;
+ };
+
+ em3027: rtc@56 {
+ compatible = "emmicro,em3027";
+ reg = <0x56>;
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_gpio_keys: gpio_keysgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+ MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170B9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100B9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B9
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170F9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100F9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
+ >;
+ };
+};
+
+&pcie {
+ pcie@0,0 {
+ reg = <0x000000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ /* non-removable i211 ethernet card */
+ eth1: intel,i211@pcie0,0 {
+ reg = <0x010000 0 0 0 0>;
+ };
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ no-1-8-v;
+ broken-cd;
+ keep-power-in-suspend;
+ status = "okay";
+};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
fsl,dte-mode;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "disabled";
};
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_dte>;
fsl,dte-mode;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
txd3-skew-ps = <0>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
txd3-skew-ps = <0>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
status = "okay";
};
txd3-skew-ps = <0>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
status = "okay";
};
phy-mode = "rgmii";
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
status = "okay";
};
txd3-skew-ps = <0>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
status = "okay";
};
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
>;
};
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_1__WDOG2_B 0x1b0b0
+ >;
+ };
};
gpio_leds {
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
- reset-gpio = <&gpio7 12 0>;
+ reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
status = "okay";
};
no-1-8-v;
status = "okay";
};
+
+&wdog1 {
+ status = "disabled";
+};
+
+&wdog2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
phy-reset-gpios = <&gpio3 29 0>;
interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+ fsl,err006687-workaround-present;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
cache-level = <2>;
arm,tag-latency = <4 2 3>;
arm,data-latency = <4 2 3>;
+ arm,shared-override;
};
pcie: pcie@0x01000000 {
ocotp: ocotp@021bc000 {
compatible = "fsl,imx6q-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6QDL_CLK_IIM>;
};
tzasc@021d0000 { /* TZASC1 */
#size-cells = <0>;
reg = <3>;
- ipu1_di0_disp1: disp1-endpoint {
+ ipu1_di1_disp1: disp1-endpoint {
};
ipu1_di1_hdmi: hdmi-endpoint {
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
<0 54 IRQ_TYPE_LEVEL_HIGH>,
<0 127 IRQ_TYPE_LEVEL_HIGH>;
- regulator-1p1@110 {
+ regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
anatop-max-voltage = <1375000>;
};
- regulator-3p0@120 {
+ regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
anatop-max-voltage = <3400000>;
};
- regulator-2p5@130 {
+ regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2100000>;
anatop-max-voltage = <2850000>;
};
- reg_arm: regulator-vddcore@140 {
+ reg_arm: regulator-vddcore {
compatible = "fsl,anatop-regulator";
regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
anatop-max-voltage = <1450000>;
};
- reg_pu: regulator-vddpu@140 {
+ reg_pu: regulator-vddpu {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpu";
regulator-min-microvolt = <725000>;
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc@140 {
+ reg_soc: regulator-vddsoc {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
ocotp: ocotp@021bc000 {
compatible = "fsl,imx6sl-ocotp", "syscon";
reg = <0x021bc000 0x4000>;
+ clocks = <&clks IMX6SL_CLK_OCOTP>;
};
audmux: audmux@021d8000 {
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart5 { /* for bluetooth */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
status = "okay";
};
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+};
+
&iomuxc {
imx6x-sdb {
pinctrl_audmux: audmuxgrp {
MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
>;
};
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x30b0
+ >;
+ };
};
};
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- regulator-1p1@110 {
+ regulator-1p1 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd1p1";
regulator-min-microvolt = <800000>;
anatop-max-voltage = <1375000>;
};
- regulator-3p0@120 {
+ regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2800000>;
anatop-max-voltage = <3400000>;
};
- regulator-2p5@130 {
+ regulator-2p5 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd2p5";
regulator-min-microvolt = <2100000>;
anatop-max-voltage = <2875000>;
};
- reg_arm: regulator-vddcore@140 {
+ reg_arm: regulator-vddcore {
compatible = "fsl,anatop-regulator";
regulator-name = "vddarm";
regulator-min-microvolt = <725000>;
anatop-max-voltage = <1450000>;
};
- reg_pcie: regulator-vddpcie@140 {
+ reg_pcie: regulator-vddpcie {
compatible = "fsl,anatop-regulator";
regulator-name = "vddpcie";
regulator-min-microvolt = <725000>;
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc@140 {
+ reg_soc: regulator-vddsoc {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
reg = <0x80000000 0x20000000>;
};
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
};
};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing0 {
+ clock-frequency = <9200000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vback-porch = <2>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
&qspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi>;
<&clks IMX6UL_CLK_SAI2>;
assigned-clock-parents = <&clks IMX6UL_CLK_PLL4_AUDIO_DIV>;
assigned-clock-rates = <0>, <12288000>;
+ fsl,sai-mclk-direction-output;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
status = "okay";
};
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+};
+
&iomuxc {
pinctrl-names = "default";
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
>;
};
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
+ >;
+ };
};
phy-mode = "rmii";
phy-handle = <ðphy1>;
status = "okay";
- phy-reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <11>;
+ phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <1>;
mdio {
#address-cells = <1>;
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart1 {
pinctrl-0 = <&pinctrl_uart1>;
- /delete-property/ fsl,uart-has-rtscts;
+ /delete-property/ uart-has-rtscts;
};
&uart2 {
pinctrl-0 = <&pinctrl_uart2>;
- /delete-property/ fsl,uart-has-rtscts;
+ /delete-property/ uart-has-rtscts;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_rtscts>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
&uart5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5 &pinctrl_uart5_rtscts>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
serial5 = &uart6;
serial6 = &uart7;
serial7 = &uart8;
+ sai1 = &sai1;
+ sai2 = &sai2;
+ sai3 = &sai3;
spi0 = &ecspi1;
spi1 = &ecspi2;
spi2 = &ecspi3;
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- reg_3p0: regulator-3p0@120 {
+ reg_3p0: regulator-3p0 {
compatible = "fsl,anatop-regulator";
regulator-name = "vdd3p0";
regulator-min-microvolt = <2625000>;
anatop-enable-bit = <0>;
};
- reg_arm: regulator-vddcore@140 {
+ reg_arm: regulator-vddcore {
compatible = "fsl,anatop-regulator";
regulator-name = "cpu";
regulator-min-microvolt = <725000>;
anatop-max-voltage = <1450000>;
};
- reg_soc: regulator-vddsoc@140 {
+ reg_soc: regulator-vddsoc {
compatible = "fsl,anatop-regulator";
regulator-name = "vddsoc";
regulator-min-microvolt = <725000>;
--- /dev/null
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&bl {
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&adc2 {
+ status = "okay";
+};
+
+&fec1 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc: m41t0m6@68 {
+ compatible = "st,m41t00";
+ reg = <0x68>;
+ };
+};
+
+&lcdif {
+ display = <&display0>;
+ status = "okay";
+
+ display0: lcd-display {
+ bits-per-pixel = <16>;
+ bus-width = <18>;
+
+ display-timings {
+ native-mode = <&timing_vga>;
+
+ /* Standard VGA timing */
+ timing_vga: 640x480 {
+ clock-frequency = <25175000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <40>;
+ hfront-porch = <24>;
+ vback-porch = <32>;
+ vfront-porch = <11>;
+ hsync-len = <96>;
+ vsync-len = <2>;
+ de-active = <1>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
+&pwm4 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbotg1 {
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_cd_usdhc1>;
+ no-1-8-v;
+ cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vref_1v8: regulator-vref-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vref-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+};
+
+&adc1 {
+ vref-supply = <®_vref_1v8>;
+};
+
+&adc2 {
+ vref-supply = <®_vref_1v8>;
+};
+
+&cpu0 {
+ arm-supply = <®_DCDC2>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_50M_CLK>;
+ clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+ assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
+ assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
+ assigned-clock-rates = <0>, <100000000>;
+ phy-mode = "rmii";
+ phy-supply = <®_LDO1>;
+ fsl,magic-packet;
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1 &pinctrl_i2c1_int>;
+ status = "okay";
+
+ ad7879@2c {
+ compatible = "adi,ad7879-1";
+ reg = <0x2c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+ touchscreen-max-pressure = <4096>;
+ adi,resistance-plate-x = <120>;
+ adi,first-conversion-delay = /bits/ 8 <3>;
+ adi,acquisition-time = /bits/ 8 <1>;
+ adi,median-filter-size = /bits/ 8 <2>;
+ adi,averaging = /bits/ 8 <1>;
+ adi,conversion-interval = /bits/ 8 <255>;
+ };
+
+ pmic@33 {
+ compatible = "ricoh,rn5t567";
+ reg = <0x33>;
+
+ regulators {
+ reg_DCDC1: DCDC1 { /* V1.0_SOC */
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_DCDC2: DCDC2 { /* V1.1_ARM */
+ regulator-min-microvolt = <975000>;
+ regulator-max-microvolt = <1125000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_DCDC3: DCDC3 { /* V1.8 */
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_DCDC4: DCDC4 { /* V1.35_DRAM */
+ regulator-min-microvolt = <1325000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_LDO1: LDO1 { /* PWR_EN_+V3.3_ETH */
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_LDO2: LDO2 { /* +V1.8_SD */
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <3325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_LDO3: LDO3 { /* PWR_EN_+V3.3_LPSR */
+ regulator-min-microvolt = <3275000>;
+ regulator-max-microvolt = <3325000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_LDO4: LDO4 { /* V1.8_LPSR */
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_LDO5: LDO5 { /* PWR_EN_+V3.3 */
+ regulator-min-microvolt = <1775000>;
+ regulator-max-microvolt = <1825000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+®_1p0d {
+ vin-supply = <®_DCDC3>;
+};
+
+&snvs_pwrkey {
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1 &pinctrl_uart1_ctrl1 &pinctrl_uart1_ctrl2>;
+ assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ uart-has-rtscts;
+ fsl,dte-mode;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ uart-has-rtscts;
+ fsl,dte-mode;
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>;
+ assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ fsl,dte-mode;
+};
+
+&usbotg1 {
+ dr_mode = "host";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4>;
+
+ pinctrl_gpio1: gpio1-grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_RD3__GPIO7_IO3 0x14 /* SODIMM 55 */
+ MX7D_PAD_ENET1_RGMII_RD2__GPIO7_IO2 0x14 /* SODIMM 63 */
+ MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0X14 /* SODIMM 73 */
+ MX7D_PAD_SAI1_RX_SYNC__GPIO6_IO16 0X14 /* SODIMM 77 */
+ MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x14 /* SODIMM 89 */
+ MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x14 /* SODIMM 91 */
+ MX7D_PAD_LCD_RESET__GPIO3_IO4 0x14 /* SODIMM 93 */
+ MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x14 /* SODIMM 95 */
+ MX7D_PAD_ENET1_RGMII_TXC__GPIO7_IO11 0x14 /* SODIMM 99 */
+ MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x14 /* SODIMM 105 */
+ MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x14 /* SODIMM 107 */
+ MX7D_PAD_EPDC_DATA00__GPIO2_IO0 0x14 /* SODIMM 111 */
+ MX7D_PAD_EPDC_DATA01__GPIO2_IO1 0x14 /* SODIMM 113 */
+ MX7D_PAD_EPDC_DATA02__GPIO2_IO2 0x14 /* SODIMM 115 */
+ MX7D_PAD_EPDC_DATA03__GPIO2_IO3 0x14 /* SODIMM 117 */
+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x14 /* SODIMM 119 */
+ MX7D_PAD_EPDC_DATA05__GPIO2_IO5 0x14 /* SODIMM 121 */
+ MX7D_PAD_EPDC_DATA06__GPIO2_IO6 0x14 /* SODIMM 123 */
+ MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x14 /* SODIMM 125 */
+ MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x14 /* SODIMM 127 */
+ MX7D_PAD_UART3_RTS_B__GPIO4_IO6 0x14 /* SODIMM 131 */
+ MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x14 /* SODIMM 133 */
+ MX7D_PAD_SAI1_RX_BCLK__GPIO6_IO17 0x14 /* SODIMM 24 */
+ MX7D_PAD_SD2_DATA2__GPIO5_IO16 0x14 /* SODIMM 100 */
+ MX7D_PAD_SD2_DATA3__GPIO5_IO17 0x14 /* SODIMM 102 */
+ MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x14 /* SODIMM 104 */
+ MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x14 /* SODIMM 106 */
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x14 /* SODIMM 110 */
+ MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x14 /* SODIMM 112 */
+ MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x14 /* SODIMM 114 */
+ MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x14 /* SODIMM 116 */
+ MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x14 /* SODIMM 118 */
+ MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x14 /* SODIMM 120 */
+ MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x14 /* SODIMM 122 */
+ MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x14 /* SODIMM 124 */
+ MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x14 /* SODIMM 126 */
+ MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x14 /* SODIMM 128 */
+ MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x14 /* SODIMM 130 */
+ MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x14 /* SODIMM 132 */
+ MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x14 /* SODIMM 134 */
+ MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x14 /* SODIMM 150 */
+ MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x14 /* SODIMM 152 */
+ MX7D_PAD_SD2_CLK__GPIO5_IO12 0x14 /* SODIMM 184 */
+ MX7D_PAD_SD2_CMD__GPIO5_IO13 0x14 /* SODIMM 186 */
+ >;
+ };
+
+ pinctrl_gpio2: gpio2-grp { /* On X22 Camera interface */
+ fsl,pins = <
+ MX7D_PAD_ECSPI2_SS0__GPIO4_IO23 0x14 /* SODIMM 65 */
+ MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x14 /* SODIMM 69 */
+ MX7D_PAD_SD1_WP__GPIO5_IO1 0x14 /* SODIMM 71 */
+ MX7D_PAD_I2C4_SDA__GPIO4_IO15 0x14 /* SODIMM 75 */
+ MX7D_PAD_ECSPI1_MISO__GPIO4_IO18 0x14 /* SODIMM 79 */
+ MX7D_PAD_I2C3_SCL__GPIO4_IO12 0x14 /* SODIMM 81 */
+ MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x14 /* SODIMM 85 */
+ MX7D_PAD_ECSPI1_SS0__GPIO4_IO19 0x14 /* SODIMM 97 */
+ MX7D_PAD_ECSPI1_SCLK__GPIO4_IO16 0x14 /* SODIMM 101 */
+ MX7D_PAD_ECSPI1_MOSI__GPIO4_IO17 0x14 /* SODIMM 103 */
+ MX7D_PAD_I2C3_SDA__GPIO4_IO13 0x14 /* SODIMM 94 */
+ MX7D_PAD_I2C4_SCL__GPIO4_IO14 0x14 /* SODIMM 96 */
+ MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x14 /* SODIMM 98 */
+ >;
+ };
+
+ pinctrl_gpio3: gpio3-grp { /* LCD 18-23 */
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA18__GPIO3_IO23 0x14 /* SODIMM 136 */
+ MX7D_PAD_LCD_DATA19__GPIO3_IO24 0x14 /* SODIMM 138 */
+ MX7D_PAD_LCD_DATA20__GPIO3_IO25 0x14 /* SODIMM 140 */
+ MX7D_PAD_LCD_DATA21__GPIO3_IO26 0x14 /* SODIMM 142 */
+ MX7D_PAD_LCD_DATA22__GPIO3_IO27 0x14 /* SODIMM 146 */
+ MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x14 /* SODIMM 148 */
+ >;
+ };
+
+ pinctrl_gpio4: gpio4-grp { /* Alternatively CAN2 */
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x14 /* SODIMM 178 */
+ MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x14 /* SODIMM 188 */
+ >;
+ };
+
+ pinctrl_i2c1_int: i2c1-int-grp { /* PMIC / TOUCH */
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x79
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_CRS__GPIO7_IO14 0x14
+ MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x73
+ MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x73
+ MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x73
+ MX7D_PAD_ENET1_RGMII_RXC__ENET1_RX_ER 0x73
+
+ MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x73
+ MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x73
+ MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x73
+ MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x73
+ MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x3
+ MX7D_PAD_SD2_WP__ENET1_MDC 0x3
+ >;
+ };
+
+ pinctrl_ecspi3_cs: ecspi3-cs-grp {
+ fsl,pins = <
+ MX7D_PAD_I2C2_SDA__GPIO4_IO11 0x14
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3-grp {
+ fsl,pins = <
+ MX7D_PAD_I2C1_SCL__ECSPI3_MISO 0x2
+ MX7D_PAD_I2C1_SDA__ECSPI3_MOSI 0x2
+ MX7D_PAD_I2C2_SCL__ECSPI3_SCLK 0x2
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x59
+ MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x59
+ >;
+ };
+
+ pinctrl_gpmi_nand: gpmi-nand-grp {
+ fsl,pins = <
+ MX7D_PAD_SD3_CLK__NAND_CLE 0x71
+ MX7D_PAD_SD3_CMD__NAND_ALE 0x71
+ MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B 0x71
+ MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B 0x71
+ MX7D_PAD_SAI1_TX_DATA__NAND_READY_B 0x74
+ MX7D_PAD_SD3_STROBE__NAND_RE_B 0x71
+ MX7D_PAD_SD3_RESET_B__NAND_WE_B 0x71
+ MX7D_PAD_SD3_DATA0__NAND_DATA00 0x71
+ MX7D_PAD_SD3_DATA1__NAND_DATA01 0x71
+ MX7D_PAD_SD3_DATA2__NAND_DATA02 0x71
+ MX7D_PAD_SD3_DATA3__NAND_DATA03 0x71
+ MX7D_PAD_SD3_DATA4__NAND_DATA04 0x71
+ MX7D_PAD_SD3_DATA5__NAND_DATA05 0x71
+ MX7D_PAD_SD3_DATA6__NAND_DATA06 0x71
+ MX7D_PAD_SD3_DATA7__NAND_DATA07 0x71
+ >;
+ };
+
+ pinctrl_i2c4: i2c4-grp {
+ fsl,pins = <
+ MX7D_PAD_ENET1_RGMII_TD3__I2C4_SDA 0x4000007f
+ MX7D_PAD_ENET1_RGMII_TD2__I2C4_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_lcdif_dat: lcdif-dat-grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ >;
+ };
+
+ pinctrl_lcdif_dat_24: lcdif-dat-24-grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ >;
+ };
+
+ pinctrl_lcdif_ctrl: lcdif-ctrl-grp {
+ fsl,pins = <
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ >;
+ };
+
+ pinctrl_pwm1: pwm1-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x79
+ >;
+ };
+
+ pinctrl_pwm2: pwm2-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x79
+ >;
+ };
+
+ pinctrl_pwm3: pwm3-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x79
+ >;
+ };
+
+ pinctrl_pwm4: pwm4-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x79
+ >;
+ };
+
+ pinctrl_uart1: uart1-grp {
+ fsl,pins = <
+ MX7D_PAD_UART1_TX_DATA__UART1_DTE_RX 0x79
+ MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x79
+ MX7D_PAD_SAI2_TX_BCLK__UART1_DTE_CTS 0x79
+ MX7D_PAD_SAI2_TX_SYNC__UART1_DTE_RTS 0x79
+ >;
+ };
+
+ pinctrl_uart1_ctrl1: uart1-ctrl1-grp {
+ fsl,pins = <
+ MX7D_PAD_SD2_DATA1__GPIO5_IO15 0x14 /* DCD */
+ MX7D_PAD_SD2_DATA0__GPIO5_IO14 0x14 /* DTR */
+ >;
+ };
+
+ pinctrl_uart2: uart2-grp {
+ fsl,pins = <
+ MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x79
+ MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x79
+ MX7D_PAD_SAI2_RX_DATA__UART2_DTE_RTS 0x79
+ MX7D_PAD_SAI2_TX_DATA__UART2_DTE_CTS 0x79
+ >;
+ };
+ pinctrl_uart3: uart3-grp {
+ fsl,pins = <
+ MX7D_PAD_UART3_TX_DATA__UART3_DTE_RX 0x79
+ MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
+ >;
+ };
+
+ pinctrl_usbotg2_reg: gpio-usbotg2-vbus {
+ fsl,pins = <
+ MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 /* SODIMM 129 USBH PEN */
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1-grp {
+ fsl,pins = <
+ MX7D_PAD_SD1_CMD__SD1_CMD 0x59
+ MX7D_PAD_SD1_CLK__SD1_CLK 0x19
+ MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59
+ MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59
+ MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59
+ MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59
+ >;
+ };
+
+ pinctrl_sai1: sai1-grp {
+ fsl,pins = <
+ MX7D_PAD_SAI1_MCLK__SAI1_MCLK 0x1f
+ MX7D_PAD_ENET1_RX_CLK__SAI1_TX_BCLK 0x1f
+ MX7D_PAD_SAI1_TX_SYNC__SAI1_TX_SYNC 0x1f
+ MX7D_PAD_ENET1_COL__SAI1_TX_DATA0 0x30
+ MX7D_PAD_ENET1_TX_CLK__SAI1_RX_DATA0 0x1f
+ >;
+ };
+};
+
+&iomuxc_lpsr {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_lpsr>;
+
+ pinctrl_gpio_lpsr: gpio1-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x59
+ MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x59
+ MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x59
+ >;
+ };
+
+ pinctrl_i2c1: i2c1-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x4000007f
+ MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x4000007f
+ >;
+ };
+
+ pinctrl_cd_usdhc1: usdhc1-cd-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x59 /* CD */
+ >;
+ };
+
+ pinctrl_uart1_ctrl2: uart1-ctrl2-grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x14 /* DSR */
+ MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x14 /* RI */
+ >;
+ };
+};
/dts-v1/;
-#include <dt-bindings/input/input.h>
#include "imx7d.dtsi"
/ {
--- /dev/null
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
+ compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d",
+ "fsl,imx7d";
+
+ reg_usb_otg2_vbus: regulator-usb-otg2-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg2_reg>;
+ regulator-name = "VCC_USB[1-4]";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio4 7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&usbotg2 {
+ vbus-supply = <®_usb_otg2_vbus>;
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7d.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&usbotg2 {
+ dr_mode = "host";
+};
/dts-v1/;
-#include <dt-bindings/input/input.h>
#include "imx7d.dtsi"
/ {
pinctrl-0 = <&pinctrl_uart6>;
assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
- fsl,uart-has-rtscts;
+ uart-has-rtscts;
status = "okay";
};
#define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2 0x0130 0x03A0 0x0000 0x5 0x0
#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO 0x0130 0x03A0 0x0000 0x6 0x0
#define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x0134 0x03A4 0x0000 0x0 0x0
-#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x0000 0x0 0x0
+#define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX 0x0134 0x03A4 0x06FC 0x0 0x3
#define MX7D_PAD_UART2_TX_DATA__I2C2_SDA 0x0134 0x03A4 0x05E0 0x1 0x0
#define MX7D_PAD_UART2_TX_DATA__SAI3_RX_DATA0 0x0134 0x03A4 0x06C8 0x2 0x0
#define MX7D_PAD_UART2_TX_DATA__ECSPI1_RDY 0x0134 0x03A4 0x0000 0x3 0x0
/dts-v1/;
-#include <dt-bindings/input/input.h>
#include "imx7d.dtsi"
/ {
arm-supply = <&sw1a_reg>;
};
+&ecspi3 {
+ fsl,spi-num-chipselects = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+
+ tsc2046@0 {
+ compatible = "ti,tsc2046";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ pinctrl-names ="default";
+ pinctrl-0 = <&pinctrl_tsc2046_pendown>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <29 0>;
+ pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+ ti,x-min = /bits/ 16 <0>;
+ ti,x-max = /bits/ 16 <0>;
+ ti,y-min = /bits/ 16 <0>;
+ ti,y-max = /bits/ 16 <0>;
+ ti,pressure-max = /bits/ 16 <0>;
+ ti,x-plat-ohms = /bits/ 16 <400>;
+ wakeup-source;
+ };
+};
+
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
};
};
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing0 {
+ clock-frequency = <9200000>;
+ hactive = <480>;
+ vactive = <272>;
+ hfront-porch = <8>;
+ hback-porch = <4>;
+ hsync-len = <41>;
+ vback-porch = <2>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx7d-sdb {
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX7D_PAD_SAI2_TX_SYNC__ECSPI3_MISO 0x2
+ MX7D_PAD_SAI2_TX_BCLK__ECSPI3_MOSI 0x2
+ MX7D_PAD_SAI2_RX_DATA__ECSPI3_SCLK 0x2
+ MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x59
+ >;
+ };
+
pinctrl_enet1: enet1grp {
fsl,pins = <
MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3
>;
};
+ pinctrl_lcdif: lcdifgrp {
+ fsl,pins = <
+ MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79
+ MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79
+ MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79
+ MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79
+ MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79
+ MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79
+ MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79
+ MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79
+ MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79
+ MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79
+ MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79
+ MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79
+ MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79
+ MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79
+ MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79
+ MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79
+ MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79
+ MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79
+ MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79
+ MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79
+ MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79
+ MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79
+ MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79
+ MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79
+ MX7D_PAD_LCD_CLK__LCD_CLK 0x79
+ MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79
+ MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79
+ MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79
+ MX7D_PAD_LCD_RESET__LCD_RESET 0x79
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x110b0
+ >;
+ };
+
+ pinctrl_tsc2046_pendown: tsc2046_pendown {
+ fsl,pins = <
+ MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x59
+ >;
+ };
+
pinctrl_uart1: uart1grp {
fsl,pins = <
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
>;
};
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x74
+ >;
+ };
};
};
/*
* Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* OTHER DEALINGS IN THE SOFTWARE.
*/
-#include <dt-bindings/clock/imx7d-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "imx7d-pinfunc.h"
-#include "skeleton.dtsi"
+#include "imx7s.dtsi"
/ {
- aliases {
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- gpio5 = &gpio6;
- gpio6 = &gpio7;
- i2c0 = &i2c1;
- i2c1 = &i2c2;
- i2c2 = &i2c3;
- i2c3 = &i2c4;
- mmc0 = &usdhc1;
- mmc1 = &usdhc2;
- mmc2 = &usdhc3;
- serial0 = &uart1;
- serial1 = &uart2;
- serial2 = &uart3;
- serial3 = &uart4;
- serial4 = &uart5;
- serial5 = &uart6;
- serial6 = &uart7;
- };
-
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <0>;
- operating-points = <
- /* KHz uV */
- 996000 1075000
- 792000 975000
- >;
- clock-latency = <61036>; /* two CLK32 periods */
- clocks = <&clks IMX7D_CLK_ARM>;
- };
-
cpu1: cpu@1 {
compatible = "arm,cortex-a7";
device_type = "cpu";
};
};
- intc: interrupt-controller@31001000 {
- compatible = "arm,cortex-a7-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x31001000 0x1000>,
- <0x31002000 0x1000>,
- <0x31004000 0x2000>,
- <0x31006000 0x2000>;
- };
-
- ckil: clock-cki {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "ckil";
- };
-
- osc: clock-osc {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "osc";
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
- interrupt-parent = <&intc>;
- };
-
- etr@30086000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x30086000 0x1000>;
- clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
- clock-names = "apb_pclk";
-
- port {
- etr_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
- };
- };
- };
-
- tpiu@30087000 {
- compatible = "arm,coresight-tpiu", "arm,primecell";
- reg = <0x30087000 0x1000>;
- clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
- clock-names = "apb_pclk";
-
- port {
- tpiu_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&replicator_out_port1>;
- };
- };
- };
-
- replicator {
- /*
- * non-configurable replicators don't show up on the
- * AMBA bus. As such no need to add "arm,primecell"
- */
- compatible = "arm,coresight-replicator";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* replicator output ports */
- port@0 {
- reg = <0>;
- replicator_out_port0: endpoint {
- remote-endpoint = <&tpiu_in_port>;
- };
- };
-
- port@1 {
- reg = <1>;
- replicator_out_port1: endpoint {
- remote-endpoint = <&etr_in_port>;
- };
- };
-
- /* replicator input port */
- port@2 {
- reg = <0>;
- replicator_in_port0: endpoint {
- slave-mode;
- remote-endpoint = <&etf_out_port>;
- };
- };
- };
- };
-
- etf@30084000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x30084000 0x1000>;
- clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
- clock-names = "apb_pclk";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- etf_in_port: endpoint {
- slave-mode;
- remote-endpoint = <&hugo_funnel_out_port0>;
- };
- };
-
- port@1 {
- reg = <0>;
- etf_out_port: endpoint {
- remote-endpoint = <&replicator_in_port0>;
- };
- };
- };
- };
-
- funnel@30083000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
- reg = <0x30083000 0x1000>;
- clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
- clock-names = "apb_pclk";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel input ports */
- port@0 {
- reg = <0>;
- hugo_funnel_in_port0: endpoint {
- slave-mode;
- remote-endpoint = <&ca_funnel_out_port0>;
- };
- };
-
- port@1 {
- reg = <1>;
- hugo_funnel_in_port1: endpoint {
- slave-mode; /* M4 input */
- };
- };
-
- port@2 {
- reg = <0>;
- hugo_funnel_out_port0: endpoint {
- remote-endpoint = <&etf_in_port>;
- };
- };
-
- /* the other input ports are not connect to anything */
- };
- };
-
- funnel@30041000 {
- compatible = "arm,coresight-funnel", "arm,primecell";
- reg = <0x30041000 0x1000>;
- clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
- clock-names = "apb_pclk";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* funnel input ports */
- port@0 {
- reg = <0>;
- ca_funnel_in_port0: endpoint {
- slave-mode;
- remote-endpoint = <&etm0_out_port>;
- };
- };
-
- port@1 {
- reg = <1>;
- ca_funnel_in_port1: endpoint {
- slave-mode;
- remote-endpoint = <&etm1_out_port>;
- };
- };
-
- /* funnel output port */
- port@2 {
- reg = <0>;
- ca_funnel_out_port0: endpoint {
- remote-endpoint = <&hugo_funnel_in_port0>;
- };
- };
-
- /* the other input ports are not connect to anything */
- };
- };
-
- etm@3007c000 {
- compatible = "arm,coresight-etm3x", "arm,primecell";
- reg = <0x3007c000 0x1000>;
- cpu = <&cpu0>;
- clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
- clock-names = "apb_pclk";
-
- port {
- etm0_out_port: endpoint {
- remote-endpoint = <&ca_funnel_in_port0>;
- };
- };
- };
-
etm@3007d000 {
compatible = "arm,coresight-etm3x", "arm,primecell";
reg = <0x3007d000 0x1000>;
};
};
};
+};
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&intc>;
- ranges;
-
- aips1: aips-bus@30000000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x30000000 0x400000>;
- ranges;
-
- gpio1: gpio@30200000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30200000 0x10000>;
- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
- <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio@30210000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30210000 0x10000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio@30220000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30220000 0x10000>;
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio4: gpio@30230000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30230000 0x10000>;
- interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio5: gpio@30240000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30240000 0x10000>;
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio6: gpio@30250000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30250000 0x10000>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio7: gpio@30260000 {
- compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
- reg = <0x30260000 0x10000>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- wdog1: wdog@30280000 {
- compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
- reg = <0x30280000 0x10000>;
- interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
- };
-
- wdog2: wdog@30290000 {
- compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
- reg = <0x30290000 0x10000>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
- status = "disabled";
- };
-
- wdog3: wdog@302a0000 {
- compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
- reg = <0x302a0000 0x10000>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
- status = "disabled";
- };
-
- wdog4: wdog@302b0000 {
- compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
- reg = <0x302b0000 0x10000>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
- status = "disabled";
- };
-
- iomuxc_lpsr: iomuxc-lpsr@302c0000 {
- compatible = "fsl,imx7d-iomuxc-lpsr";
- reg = <0x302c0000 0x10000>;
- fsl,input-sel = <&iomuxc>;
- };
-
- gpt1: gpt@302d0000 {
- compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
- reg = <0x302d0000 0x10000>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_GPT1_ROOT_CLK>;
- clock-names = "ipg", "per";
- };
-
- gpt2: gpt@302e0000 {
- compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
- reg = <0x302e0000 0x10000>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_GPT2_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- gpt3: gpt@302f0000 {
- compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
- reg = <0x302f0000 0x10000>;
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_GPT3_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- gpt4: gpt@30300000 {
- compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
- reg = <0x30300000 0x10000>;
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_GPT4_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- iomuxc: iomuxc@30330000 {
- compatible = "fsl,imx7d-iomuxc";
- reg = <0x30330000 0x10000>;
- };
-
- gpr: iomuxc-gpr@30340000 {
- compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
- reg = <0x30340000 0x10000>;
- };
-
- ocotp: ocotp-ctrl@30350000 {
- compatible = "syscon";
- reg = <0x30350000 0x10000>;
- clocks = <&clks IMX7D_CLK_DUMMY>;
- status = "disabled";
- };
-
- anatop: anatop@30360000 {
- compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
- "syscon", "simple-bus";
- reg = <0x30360000 0x10000>;
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-
- reg_1p0d: regulator-vdd1p0d@210 {
- compatible = "fsl,anatop-regulator";
- regulator-name = "vdd1p0d";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1200000>;
- anatop-reg-offset = <0x210>;
- anatop-vol-bit-shift = <8>;
- anatop-vol-bit-width = <5>;
- anatop-min-bit-val = <8>;
- anatop-min-voltage = <800000>;
- anatop-max-voltage = <1200000>;
- anatop-enable-bit = <31>;
- };
- };
-
- snvs: snvs@30370000 {
- compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
- reg = <0x30370000 0x10000>;
-
- snvs_rtc: snvs-rtc-lp {
- compatible = "fsl,sec-v4.0-mon-rtc-lp";
- regmap = <&snvs>;
- offset = <0x34>;
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- snvs_poweroff: snvs-poweroff {
- compatible = "syscon-poweroff";
- regmap = <&snvs>;
- offset = <0x38>;
- mask = <0x60>;
- };
-
- snvs_pwrkey: snvs-powerkey {
- compatible = "fsl,sec-v4.0-pwrkey";
- regmap = <&snvs>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
- linux,keycode = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- clks: ccm@30380000 {
- compatible = "fsl,imx7d-ccm";
- reg = <0x30380000 0x10000>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
- #clock-cells = <1>;
- clocks = <&ckil>, <&osc>;
- clock-names = "ckil", "osc";
- };
-
- src: src@30390000 {
- compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
- reg = <0x30390000 0x10000>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
- #reset-cells = <1>;
- };
- };
-
- aips2: aips-bus@30400000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x30400000 0x400000>;
- ranges;
-
- adc1: adc@30610000 {
- compatible = "fsl,imx7d-adc";
- reg = <0x30610000 0x10000>;
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_ADC_ROOT_CLK>;
- clock-names = "adc";
- status = "disabled";
- };
-
- adc2: adc@30620000 {
- compatible = "fsl,imx7d-adc";
- reg = <0x30620000 0x10000>;
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_ADC_ROOT_CLK>;
- clock-names = "adc";
- status = "disabled";
- };
-
- pwm1: pwm@30660000 {
- compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
- reg = <0x30660000 0x10000>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
- <&clks IMX7D_PWM1_ROOT_CLK>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- status = "disabled";
- };
-
- pwm2: pwm@30670000 {
- compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
- reg = <0x30670000 0x10000>;
- interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
- <&clks IMX7D_PWM2_ROOT_CLK>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- status = "disabled";
- };
-
- pwm3: pwm@30680000 {
- compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
- reg = <0x30680000 0x10000>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
- <&clks IMX7D_PWM3_ROOT_CLK>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- status = "disabled";
- };
-
- pwm4: pwm@30690000 {
- compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
- reg = <0x30690000 0x10000>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
- <&clks IMX7D_PWM4_ROOT_CLK>;
- clock-names = "ipg", "per";
- #pwm-cells = <2>;
- status = "disabled";
- };
-
- lcdif: lcdif@30730000 {
- compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
- reg = <0x30730000 0x10000>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
- <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CLK_DUMMY>;
- clock-names = "pix", "axi", "disp_axi";
- status = "disabled";
- };
- };
-
- aips3: aips-bus@30800000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x30800000 0x400000>;
- ranges;
-
- uart1: serial@30860000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30860000 0x10000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_UART1_ROOT_CLK>,
- <&clks IMX7D_UART1_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart2: serial@30890000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30890000 0x10000>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_UART2_ROOT_CLK>,
- <&clks IMX7D_UART2_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart3: serial@30880000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30880000 0x10000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_UART3_ROOT_CLK>,
- <&clks IMX7D_UART3_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- flexcan1: can@30a00000 {
- compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
- reg = <0x30a00000 0x10000>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CAN1_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- flexcan2: can@30a10000 {
- compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
- reg = <0x30a10000 0x10000>;
- interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CAN2_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- i2c1: i2c@30a20000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
- reg = <0x30a20000 0x10000>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
- status = "disabled";
- };
-
- i2c2: i2c@30a30000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
- reg = <0x30a30000 0x10000>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
- status = "disabled";
- };
-
- i2c3: i2c@30a40000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
- reg = <0x30a40000 0x10000>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
- status = "disabled";
- };
-
- i2c4: i2c@30a50000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
- reg = <0x30a50000 0x10000>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
- status = "disabled";
- };
-
- uart4: serial@30a60000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30a60000 0x10000>;
- interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_UART4_ROOT_CLK>,
- <&clks IMX7D_UART4_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart5: serial@30a70000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30a70000 0x10000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_UART5_ROOT_CLK>,
- <&clks IMX7D_UART5_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart6: serial@30a80000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30a80000 0x10000>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_UART6_ROOT_CLK>,
- <&clks IMX7D_UART6_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart7: serial@30a90000 {
- compatible = "fsl,imx7d-uart",
- "fsl,imx6q-uart";
- reg = <0x30a90000 0x10000>;
- interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_UART7_ROOT_CLK>,
- <&clks IMX7D_UART7_ROOT_CLK>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- usbotg1: usb@30b10000 {
- compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
- reg = <0x30b10000 0x200>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_USB_CTRL_CLK>;
- fsl,usbphy = <&usbphynop1>;
- fsl,usbmisc = <&usbmisc1 0>;
- phy-clkgate-delay-us = <400>;
- status = "disabled";
- };
-
- usbotg2: usb@30b20000 {
- compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
- reg = <0x30b20000 0x200>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_USB_CTRL_CLK>;
- fsl,usbphy = <&usbphynop2>;
- fsl,usbmisc = <&usbmisc2 0>;
- phy-clkgate-delay-us = <400>;
- status = "disabled";
- };
-
- usbh: usb@30b30000 {
- compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
- reg = <0x30b30000 0x200>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_USB_CTRL_CLK>;
- fsl,usbphy = <&usbphynop3>;
- fsl,usbmisc = <&usbmisc3 0>;
- phy_type = "hsic";
- dr_mode = "host";
- phy-clkgate-delay-us = <400>;
- status = "disabled";
- };
-
- usbmisc1: usbmisc@30b10200 {
- #index-cells = <1>;
- compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
- reg = <0x30b10200 0x200>;
- };
-
- usbmisc2: usbmisc@30b20200 {
- #index-cells = <1>;
- compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
- reg = <0x30b20200 0x200>;
- };
-
- usbmisc3: usbmisc@30b30200 {
- #index-cells = <1>;
- compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
- reg = <0x30b30200 0x200>;
- };
-
- usbphynop1: usbphynop1 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks IMX7D_USB_PHY1_CLK>;
- clock-names = "main_clk";
- };
-
- usbphynop2: usbphynop2 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks IMX7D_USB_PHY2_CLK>;
- clock-names = "main_clk";
- };
-
- usbphynop3: usbphynop3 {
- compatible = "usb-nop-xceiv";
- clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
- clock-names = "main_clk";
- };
-
- usdhc1: usdhc@30b40000 {
- compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
- reg = <0x30b40000 0x10000>;
- interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_USDHC1_ROOT_CLK>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
+&aips3 {
+ usbotg2: usb@30b20000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b20000 0x200>;
+ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop2>;
+ fsl,usbmisc = <&usbmisc2 0>;
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
- usdhc2: usdhc@30b50000 {
- compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
- reg = <0x30b50000 0x10000>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_USDHC2_ROOT_CLK>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
+ usbmisc2: usbmisc@30b20200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b20200 0x200>;
+ };
- usdhc3: usdhc@30b60000 {
- compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
- reg = <0x30b60000 0x10000>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_CLK_DUMMY>,
- <&clks IMX7D_USDHC3_ROOT_CLK>;
- clock-names = "ipg", "ahb", "per";
- bus-width = <4>;
- status = "disabled";
- };
+ usbphynop2: usbphynop2 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY2_CLK>;
+ clock-names = "main_clk";
+ };
- fec1: ethernet@30be0000 {
- compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
- reg = <0x30be0000 0x10000>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
- <&clks IMX7D_ENET_AXI_ROOT_CLK>,
- <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
- <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
- <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
- status = "disabled";
- };
+ fec2: ethernet@30bf0000 {
+ compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+ reg = <0x30bf0000 0x10000>;
+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ status = "disabled";
+ };
+};
- fec2: ethernet@30bf0000 {
- compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
- reg = <0x30bf0000 0x10000>;
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
- <&clks IMX7D_ENET_AXI_ROOT_CLK>,
- <&clks IMX7D_ENET2_TIME_ROOT_CLK>,
- <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
- <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
- clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
- status = "disabled";
- };
+&ca_funnel_ports {
+ port@1 {
+ reg = <1>;
+ ca_funnel_in_port1: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm1_out_port>;
};
};
};
--- /dev/null
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx7s-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7S on Colibri Evaluation Board V3";
+ compatible = "toradex,colibri-imx7s-eval-v3", "toradex,colibri-imx7s",
+ "fsl,imx7s";
+};
--- /dev/null
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx7s.dtsi"
+#include "imx7-colibri.dtsi"
+
+/ {
+ memory {
+ reg = <0x80000000 0x10000000>;
+ };
+};
--- /dev/null
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx7d-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+ aliases {
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ gpio5 = &gpio6;
+ gpio6 = &gpio7;
+ i2c0 = &i2c1;
+ i2c1 = &i2c2;
+ i2c2 = &i2c3;
+ i2c3 = &i2c4;
+ mmc0 = &usdhc1;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc3;
+ serial0 = &uart1;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &uart6;
+ serial6 = &uart7;
+ spi0 = &ecspi1;
+ spi1 = &ecspi2;
+ spi2 = &ecspi3;
+ spi3 = &ecspi4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ operating-points = <
+ /* KHz uV */
+ 996000 1075000
+ 792000 975000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX7D_CLK_ARM>;
+ };
+ };
+
+ intc: interrupt-controller@31001000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x31001000 0x1000>,
+ <0x31002000 0x1000>,
+ <0x31004000 0x2000>,
+ <0x31006000 0x2000>;
+ };
+
+ ckil: clock-cki {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "ckil";
+ };
+
+ osc: clock-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "osc";
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-parent = <&intc>;
+ };
+
+ etr@30086000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x30086000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etr_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
+ tpiu@30087000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x30087000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ tpiu_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&replicator_out_port1>;
+ };
+ };
+ };
+
+ replicator {
+ /*
+ * non-configurable replicators don't show up on the
+ * AMBA bus. As such no need to add "arm,primecell"
+ */
+ compatible = "arm,coresight-replicator";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* replicator output ports */
+ port@0 {
+ reg = <0>;
+ replicator_out_port0: endpoint {
+ remote-endpoint = <&tpiu_in_port>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ replicator_out_port1: endpoint {
+ remote-endpoint = <&etr_in_port>;
+ };
+ };
+
+ /* replicator input port */
+ port@2 {
+ reg = <0>;
+ replicator_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etf_out_port>;
+ };
+ };
+ };
+ };
+
+ etf@30084000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x30084000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ etf_in_port: endpoint {
+ slave-mode;
+ remote-endpoint = <&hugo_funnel_out_port0>;
+ };
+ };
+
+ port@1 {
+ reg = <0>;
+ etf_out_port: endpoint {
+ remote-endpoint = <&replicator_in_port0>;
+ };
+ };
+ };
+ };
+
+ funnel@30083000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x30083000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel input ports */
+ port@0 {
+ reg = <0>;
+ hugo_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&ca_funnel_out_port0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hugo_funnel_in_port1: endpoint {
+ slave-mode; /* M4 input */
+ };
+ };
+
+ port@2 {
+ reg = <0>;
+ hugo_funnel_out_port0: endpoint {
+ remote-endpoint = <&etf_in_port>;
+ };
+ };
+
+ /* the other input ports are not connect to anything */
+ };
+ };
+
+ funnel@30041000 {
+ compatible = "arm,coresight-funnel", "arm,primecell";
+ reg = <0x30041000 0x1000>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ ca_funnel_ports: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* funnel input ports */
+ port@0 {
+ reg = <0>;
+ ca_funnel_in_port0: endpoint {
+ slave-mode;
+ remote-endpoint = <&etm0_out_port>;
+ };
+ };
+
+ /* funnel output port */
+ port@2 {
+ reg = <0>;
+ ca_funnel_out_port0: endpoint {
+ remote-endpoint = <&hugo_funnel_in_port0>;
+ };
+ };
+
+ /* the other input ports are not connect to anything */
+ };
+ };
+
+ etm@3007c000 {
+ compatible = "arm,coresight-etm3x", "arm,primecell";
+ reg = <0x3007c000 0x1000>;
+ cpu = <&cpu0>;
+ clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+ clock-names = "apb_pclk";
+
+ port {
+ etm0_out_port: endpoint {
+ remote-endpoint = <&ca_funnel_in_port0>;
+ };
+ };
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ aips1: aips-bus@30000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30000000 0x400000>;
+ ranges;
+
+ gpio1: gpio@30200000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30200000 0x10000>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio@30210000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30210000 0x10000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio@30220000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30220000 0x10000>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio4: gpio@30230000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30230000 0x10000>;
+ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio5: gpio@30240000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30240000 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio6: gpio@30250000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30250000 0x10000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio7: gpio@30260000 {
+ compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+ reg = <0x30260000 0x10000>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ wdog1: wdog@30280000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x30280000 0x10000>;
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+ };
+
+ wdog2: wdog@30290000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x30290000 0x10000>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ wdog3: wdog@302a0000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x302a0000 0x10000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ wdog4: wdog@302b0000 {
+ compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+ reg = <0x302b0000 0x10000>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+ compatible = "fsl,imx7d-iomuxc-lpsr";
+ reg = <0x302c0000 0x10000>;
+ fsl,input-sel = <&iomuxc>;
+ };
+
+ gpt1: gpt@302d0000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x302d0000 0x10000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ };
+
+ gpt2: gpt@302e0000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x302e0000 0x10000>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ gpt3: gpt@302f0000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x302f0000 0x10000>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ gpt4: gpt@30300000 {
+ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+ reg = <0x30300000 0x10000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_GPT4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ iomuxc: iomuxc@30330000 {
+ compatible = "fsl,imx7d-iomuxc";
+ reg = <0x30330000 0x10000>;
+ };
+
+ gpr: iomuxc-gpr@30340000 {
+ compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+ reg = <0x30340000 0x10000>;
+ };
+
+ ocotp: ocotp-ctrl@30350000 {
+ compatible = "syscon";
+ reg = <0x30350000 0x10000>;
+ clocks = <&clks IMX7D_CLK_DUMMY>;
+ status = "disabled";
+ };
+
+ anatop: anatop@30360000 {
+ compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+ "syscon", "simple-bus";
+ reg = <0x30360000 0x10000>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+ reg_1p0d: regulator-vdd1p0d {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p0d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1200000>;
+ anatop-reg-offset = <0x210>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <8>;
+ anatop-min-voltage = <800000>;
+ anatop-max-voltage = <1200000>;
+ anatop-enable-bit = <31>;
+ };
+ };
+
+ snvs: snvs@30370000 {
+ compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+ reg = <0x30370000 0x10000>;
+
+ snvs_rtc: snvs-rtc-lp {
+ compatible = "fsl,sec-v4.0-mon-rtc-lp";
+ regmap = <&snvs>;
+ offset = <0x34>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ snvs_poweroff: snvs-poweroff {
+ compatible = "syscon-poweroff";
+ regmap = <&snvs>;
+ offset = <0x38>;
+ mask = <0x60>;
+ };
+
+ snvs_pwrkey: snvs-powerkey {
+ compatible = "fsl,sec-v4.0-pwrkey";
+ regmap = <&snvs>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+ linux,keycode = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
+
+ clks: ccm@30380000 {
+ compatible = "fsl,imx7d-ccm";
+ reg = <0x30380000 0x10000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #clock-cells = <1>;
+ clocks = <&ckil>, <&osc>;
+ clock-names = "ckil", "osc";
+ };
+
+ src: src@30390000 {
+ compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+ reg = <0x30390000 0x10000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ #reset-cells = <1>;
+ };
+ };
+
+ aips2: aips-bus@30400000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30400000 0x400000>;
+ ranges;
+
+ adc1: adc@30610000 {
+ compatible = "fsl,imx7d-adc";
+ reg = <0x30610000 0x10000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ adc2: adc@30620000 {
+ compatible = "fsl,imx7d-adc";
+ reg = <0x30620000 0x10000>;
+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ ecspi4: ecspi@30630000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30630000 0x10000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ECSPI4_ROOT_CLK>,
+ <&clks IMX7D_ECSPI4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ pwm1: pwm@30660000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30660000 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+ <&clks IMX7D_PWM1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@30670000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30670000 0x10000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+ <&clks IMX7D_PWM2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@30680000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30680000 0x10000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+ <&clks IMX7D_PWM3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ pwm4: pwm@30690000 {
+ compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+ reg = <0x30690000 0x10000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+ <&clks IMX7D_PWM4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ #pwm-cells = <2>;
+ status = "disabled";
+ };
+
+ lcdif: lcdif@30730000 {
+ compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+ reg = <0x30730000 0x10000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>;
+ clock-names = "pix", "axi", "disp_axi";
+ status = "disabled";
+ };
+ };
+
+ aips3: aips-bus@30800000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x30800000 0x400000>;
+ ranges;
+
+ ecspi1: ecspi@30820000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30820000 0x10000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ECSPI1_ROOT_CLK>,
+ <&clks IMX7D_ECSPI1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi2: ecspi@30830000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30830000 0x10000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ECSPI2_ROOT_CLK>,
+ <&clks IMX7D_ECSPI2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ ecspi3: ecspi@30840000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-ecspi", "fsl,imx51-ecspi";
+ reg = <0x30840000 0x10000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ECSPI3_ROOT_CLK>,
+ <&clks IMX7D_ECSPI3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart1: serial@30860000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30860000 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+ <&clks IMX7D_UART1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart2: serial@30890000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30890000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+ <&clks IMX7D_UART2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart3: serial@30880000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30880000 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+ <&clks IMX7D_UART3_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ flexcan1: can@30a00000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a00000 0x10000>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN1_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ flexcan2: can@30a10000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a10000 0x10000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ i2c1: i2c@30a20000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a20000 0x10000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@30a30000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a30000 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@30a40000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a40000 0x10000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@30a50000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+ reg = <0x30a50000 0x10000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+ status = "disabled";
+ };
+
+ uart4: serial@30a60000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a60000 0x10000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+ <&clks IMX7D_UART4_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart5: serial@30a70000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a70000 0x10000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+ <&clks IMX7D_UART5_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart6: serial@30a80000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a80000 0x10000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+ <&clks IMX7D_UART6_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart7: serial@30a90000 {
+ compatible = "fsl,imx7d-uart",
+ "fsl,imx6q-uart";
+ reg = <0x30a90000 0x10000>;
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+ <&clks IMX7D_UART7_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ usbotg1: usb@30b10000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b10000 0x200>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbh: usb@30b30000 {
+ compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+ reg = <0x30b30000 0x200>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_USB_CTRL_CLK>;
+ fsl,usbphy = <&usbphynop3>;
+ fsl,usbmisc = <&usbmisc3 0>;
+ phy_type = "hsic";
+ dr_mode = "host";
+ phy-clkgate-delay-us = <400>;
+ status = "disabled";
+ };
+
+ usbmisc1: usbmisc@30b10200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b10200 0x200>;
+ };
+
+ usbmisc3: usbmisc@30b30200 {
+ #index-cells = <1>;
+ compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+ reg = <0x30b30200 0x200>;
+ };
+
+ usbphynop1: usbphynop1 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_PHY1_CLK>;
+ clock-names = "main_clk";
+ };
+
+ usbphynop3: usbphynop3 {
+ compatible = "usb-nop-xceiv";
+ clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+ clock-names = "main_clk";
+ };
+
+ usdhc1: usdhc@30b40000 {
+ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x30b40000 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_USDHC1_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc2: usdhc@30b50000 {
+ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x30b50000 0x10000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_USDHC2_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ usdhc3: usdhc@30b60000 {
+ compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+ reg = <0x30b60000 0x10000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_USDHC3_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ fec1: ethernet@30be0000 {
+ compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+ reg = <0x30be0000 0x10000>;
+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+ <&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+ <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+ <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+ clock-names = "ipg", "ahb", "ptp",
+ "enet_clk_ref", "enet_out";
+ fsl,num-tx-queues=<3>;
+ fsl,num-rx-queues=<3>;
+ status = "disabled";
+ };
+ };
+ };
+};
#address-cells = <3>;
#size-cells = <2>;
reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
- ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
- 0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
+ ranges = <0x82000000 0 0x60000000 0x60000000
+ 0 0x10000000>;
status = "disabled";
device_type = "pci";
num-lanes = <2>;
+ bus-range = <0x00 0xff>;
+ /* error interrupt */
+ interrupts = <GIC_SPI 385 IRQ_TYPE_EDGE_RISING>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
};
+&k2g_pinctrl {
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x11cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+};
+
&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
status = "okay";
};
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/keystone.h>
#include "skeleton.dtsi"
/ {
ranges = <0x0 0x0 0x0 0xc0000000>;
dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
+ k2g_pinctrl: pinmux@02621000 {
+ compatible = "pinctrl-single";
+ reg = <0x02621000 0x410>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x001b0007>;
+ };
+
uart0: serial@02530c00 {
compatible = "ns16550a";
current-speed = <115200>;
interrupts = <GIC_SPI 435 IRQ_TYPE_EDGE_RISING>;
};
+ k2l_pmx: pinmux@02620690 {
+ compatible = "pinctrl-single";
+ reg = <0x02620690 0xc>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,bit-per-mux;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x1>;
+ status = "disabled";
+
+ uart3_emifa_pins: pinmux_uart3_emifa_pins {
+ pinctrl-single,bits = <
+ /* UART3_EMIFA_SEL */
+ 0x0 0x0 0xc0
+ >;
+ };
+
+ uart2_emifa_pins: pinmux_uart2_emifa_pins {
+ pinctrl-single,bits = <
+ /* UART2_EMIFA_SEL */
+ 0x0 0x0 0x30
+ >;
+ };
+
+ uart01_spi2_pins: pinmux_uart01_spi2_pins {
+ pinctrl-single,bits = <
+ /* UART01_SPI2_SEL */
+ 0x0 0x0 0x4
+ >;
+ };
+
+ dfesync_rp1_pins: pinmux_dfesync_rp1_pins{
+ pinctrl-single,bits = <
+ /* DFESYNC_RP1_SEL */
+ 0x0 0x0 0x2
+ >;
+ };
+
+ avsif_pins: pinmux_avsif_pins {
+ pinctrl-single,bits = <
+ /* AVSIF_SEL */
+ 0x0 0x0 0x1
+ >;
+ };
+
+ gpio_emu_pins: pinmux_gpio_emu_pins {
+ pinctrl-single,bits = <
+ /*
+ * GPIO_EMU_SEL[31]: 0-GPIO31, 1-EMU33
+ * GPIO_EMU_SEL[30]: 0-GPIO30, 1-EMU32
+ * GPIO_EMU_SEL[29]: 0-GPIO29, 1-EMU31
+ * GPIO_EMU_SEL[28]: 0-GPIO28, 1-EMU30
+ * GPIO_EMU_SEL[27]: 0-GPIO27, 1-EMU29
+ * GPIO_EMU_SEL[26]: 0-GPIO26, 1-EMU28
+ * GPIO_EMU_SEL[25]: 0-GPIO25, 1-EMU27
+ * GPIO_EMU_SEL[24]: 0-GPIO24, 1-EMU26
+ * GPIO_EMU_SEL[23]: 0-GPIO23, 1-EMU25
+ * GPIO_EMU_SEL[22]: 0-GPIO22, 1-EMU24
+ * GPIO_EMU_SEL[21]: 0-GPIO21, 1-EMU23
+ * GPIO_EMU_SEL[20]: 0-GPIO20, 1-EMU22
+ * GPIO_EMU_SEL[19]: 0-GPIO19, 1-EMU21
+ * GPIO_EMU_SEL[18]: 0-GPIO18, 1-EMU20
+ * GPIO_EMU_SEL[17]: 0-GPIO17, 1-EMU19
+ */
+ 0x4 0x0000 0xFFFE0000
+ >;
+ };
+
+ gpio_timio_pins: pinmux_gpio_timio_pins {
+ pinctrl-single,bits = <
+ /*
+ * GPIO_TIMIO_SEL[15]: 0-GPIO15, 1-TIMO7
+ * GPIO_TIMIO_SEL[14]: 0-GPIO14, 1-TIMO6
+ * GPIO_TIMIO_SEL[13]: 0-GPIO13, 1-TIMO5
+ * GPIO_TIMIO_SEL[12]: 0-GPIO12, 1-TIMO4
+ * GPIO_TIMIO_SEL[11]: 0-GPIO11, 1-TIMO3
+ * GPIO_TIMIO_SEL[10]: 0-GPIO10, 1-TIMO2
+ * GPIO_TIMIO_SEL[9]: 0-GPIO9, 1-TIMI7
+ * GPIO_TIMIO_SEL[8]: 0-GPIO8, 1-TIMI6
+ * GPIO_TIMIO_SEL[7]: 0-GPIO7, 1-TIMI5
+ * GPIO_TIMIO_SEL[6]: 0-GPIO6, 1-TIMI4
+ * GPIO_TIMIO_SEL[5]: 0-GPIO5, 1-TIMI3
+ * GPIO_TIMIO_SEL[4]: 0-GPIO4, 1-TIMI2
+ */
+ 0x4 0x0 0xFFF0
+ >;
+ };
+
+ gpio_spi2cs_pins: pinmux_gpio_spi2cs_pins {
+ pinctrl-single,bits = <
+ /*
+ * GPIO_SPI2CS_SEL[3]: 0-GPIO3, 1-SPI2CS4
+ * GPIO_SPI2CS_SEL[2]: 0-GPIO2, 1-SPI2CS3
+ * GPIO_SPI2CS_SEL[1]: 0-GPIO1, 1-SPI2CS2
+ * GPIO_SPI2CS_SEL[0]: 0-GPIO0, 1-SPI2CS1
+ */
+ 0x4 0x0 0xF
+ >;
+ };
+
+ gpio_dfeio_pins: pinmux_gpio_dfeio_pins {
+ pinctrl-single,bits = <
+ /*
+ * GPIO_DFEIO_SEL[31]: 0-DFEIO17, 1-GPIO63
+ * GPIO_DFEIO_SEL[30]: 0-DFEIO16, 1-GPIO62
+ * GPIO_DFEIO_SEL[29]: 0-DFEIO15, 1-GPIO61
+ * GPIO_DFEIO_SEL[28]: 0-DFEIO14, 1-GPIO60
+ * GPIO_DFEIO_SEL[27]: 0-DFEIO13, 1-GPIO59
+ * GPIO_DFEIO_SEL[26]: 0-DFEIO12, 1-GPIO58
+ * GPIO_DFEIO_SEL[25]: 0-DFEIO11, 1-GPIO57
+ * GPIO_DFEIO_SEL[24]: 0-DFEIO10, 1-GPIO56
+ * GPIO_DFEIO_SEL[23]: 0-DFEIO9, 1-GPIO55
+ * GPIO_DFEIO_SEL[22]: 0-DFEIO8, 1-GPIO54
+ * GPIO_DFEIO_SEL[21]: 0-DFEIO7, 1-GPIO53
+ * GPIO_DFEIO_SEL[20]: 0-DFEIO6, 1-GPIO52
+ * GPIO_DFEIO_SEL[19]: 0-DFEIO5, 1-GPIO51
+ * GPIO_DFEIO_SEL[18]: 0-DFEIO4, 1-GPIO50
+ * GPIO_DFEIO_SEL[17]: 0-DFEIO3, 1-GPIO49
+ * GPIO_DFEIO_SEL[16]: 0-DFEIO2, 1-GPIO48
+ */
+ 0x8 0x0 0xFFFF0000
+ >;
+ };
+
+ gpio_emifa_pins: pinmux_gpio_emifa_pins {
+ pinctrl-single,bits = <
+ /*
+ * GPIO_EMIFA_SEL[15]: 0-EMIFA17, 1-GPIO47
+ * GPIO_EMIFA_SEL[14]: 0-EMIFA16, 1-GPIO46
+ * GPIO_EMIFA_SEL[13]: 0-EMIFA15, 1-GPIO45
+ * GPIO_EMIFA_SEL[12]: 0-EMIFA14, 1-GPIO44
+ * GPIO_EMIFA_SEL[11]: 0-EMIFA13, 1-GPIO43
+ * GPIO_EMIFA_SEL[10]: 0-EMIFA10, 1-GPIO42
+ * GPIO_EMIFA_SEL[9]: 0-EMIFA9, 1-GPIO41
+ * GPIO_EMIFA_SEL[8]: 0-EMIFA8, 1-GPIO40
+ * GPIO_EMIFA_SEL[7]: 0-EMIFA7, 1-GPIO39
+ * GPIO_EMIFA_SEL[6]: 0-EMIFA6, 1-GPIO38
+ * GPIO_EMIFA_SEL[5]: 0-EMIFA5, 1-GPIO37
+ * GPIO_EMIFA_SEL[4]: 0-EMIFA4, 1-GPIO36
+ * GPIO_EMIFA_SEL[3]: 0-EMIFA3, 1-GPIO35
+ * GPIO_EMIFA_SEL[2]: 0-EMIFA2, 1-GPIO34
+ * GPIO_EMIFA_SEL[1]: 0-EMIFA1, 1-GPIO33
+ * GPIO_EMIFA_SEL[0]: 0-EMIFA0, 1-GPIO32
+ */
+ 0x8 0x0 0xFFFF
+ >;
+ };
+ };
+
dspgpio0: keystone_dsp_gpio@02620240 {
compatible = "ti,keystone-dsp-gpio";
gpio-controller;
#address-cells = <3>;
#size-cells = <2>;
reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
- ranges = <0x81000000 0 0 0x23250000 0 0x4000
- 0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
+ ranges = <0x82000000 0 0x50000000 0x50000000
+ 0 0x10000000>;
status = "disabled";
device_type = "pci";
num-lanes = <2>;
+ bus-range = <0x00 0xff>;
+ /* error interrupt */
+ interrupts = <GIC_SPI 38 IRQ_TYPE_EDGE_RISING>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
};
};
- pwm10: dmtimer-pwm@10 {
+ pwm10: dmtimer-pwm {
compatible = "ti,omap-dmtimer-pwm";
pinctrl-names = "default";
pinctrl-0 = <&pwm_pins>;
gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd INI */
};
- lcd0: display@0 {
+ lcd0: display {
compatible = "panel-dpi";
label = "15";
status = "okay";
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
snps,quirk-frame-length-adjustment = <0x20>;
+ snps,dis_rxdet_inp3_quirk;
};
pcie@3400000 {
#include <dt-bindings/clock/meson8b-clkc.h>
#include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
#include "skeleton.dtsi"
/ {
#interrupt-cells = <3>;
};
+ reset: reset-controller@c1104404 {
+ compatible = "amlogic,meson8b-reset";
+ reg = <0xc1104404 0x20>;
+ #reset-cells = <1>;
+ };
+
wdt: watchdog@c1109900 {
compatible = "amlogic,meson8b-wdt";
reg = <0xc1109900 0x8>;
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <18432000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
clock-div = <1>;
};
- func_96m_ck: func_96m_ck {
+ func_96m_ck: func_96m_ck@540 {
#clock-cells = <0>;
};
vcc-supply = <&hsusb2_power>;
};
- tfp410: encoder@0 {
+ tfp410: encoder0 {
compatible = "ti,tfp410";
powerdown-gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
port@0 {
reg = <0>;
- tfp410_in: endpoint@0 {
+ tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
- tfp410_out: endpoint@0 {
+ tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
- dvi0: connector@0 {
+ dvi0: connector0 {
compatible = "dvi-connector";
label = "dvi";
};
};
- tv0: connector@1 {
+ tv0: connector1 {
compatible = "svideo-connector";
label = "tv";
};
- tfp410: encoder@0 {
+ tfp410: encoder0 {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
port@0 {
reg = <0>;
- tfp410_in: endpoint@0 {
+ tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
- tfp410_out: endpoint@0 {
+ tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
- dvi0: connector@0 {
+ dvi0: connector0 {
compatible = "dvi-connector";
label = "dvi";
};
};
- tv0: connector@1 {
+ tv0: connector1 {
compatible = "svideo-connector";
label = "tv";
regulator-max-microvolt = <3300000>;
};
- tv0: connector@1 {
+ tv0: connector {
compatible = "svideo-connector";
label = "tv";
};
};
- tfp410: encoder@0 {
+ tfp410: encoder0 {
compatible = "ti,tfp410";
powerdown-gpios = <&twl_gpio 7 GPIO_ACTIVE_LOW>;
port@0 {
reg = <0>;
- tfp410_in: endpoint@0 {
+ tfp410_in: endpoint {
remote-endpoint = <&dpi_dvi_out>;
};
};
port@1 {
reg = <1>;
- tfp410_out: endpoint@0 {
+ tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
- dvi0: connector@0 {
+ dvi0: connector0 {
compatible = "dvi-connector";
label = "dvi";
};
};
- tv0: connector@1 {
+ tv0: connector1 {
compatible = "svideo-connector";
label = "tv";
vdda_dac-supply = <&vdac>;
port {
- dpi_dvi_out: endpoint@0 {
+ dpi_dvi_out: endpoint {
remote-endpoint = <&tfp410_in>;
data-lines = <24>;
};
display2 = &tv0;
};
- lcd0: display@0 {
+ lcd0: display {
compatible = "panel-dpi";
label = "lcd";
&dss {
port {
- dpi_lcd_out: endpoint@1 {
+ dpi_lcd_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
model = "TimLL OMAP3 Devkit8000 with 4.3'' LCD panel";
compatible = "timll,omap3-devkit8000", "ti,omap3";
- lcd0: display@0 {
+ lcd0: display {
panel-timing {
clock-frequency = <10164705>;
hactive = <480>;
model = "TimLL OMAP3 Devkit8000 with 7.0'' LCD panel";
compatible = "timll,omap3-devkit8000", "ti,omap3";
- lcd0: display@0 {
+ lcd0: display {
panel-timing {
clock-frequency = <40000000>;
hactive = <800>;
};
};
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm11 0 2000000 0>;
+ pwm-names = "backlight";
+ brightness-levels = <0 11 20 30 40 50 60 70 80 90 100>;
+ default-brightness-level = <9>; /* => 90 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ };
+
+ pwm11: dmtimer-pwm {
+ compatible = "ti,omap-dmtimer-pwm";
+ ti,timers = <&timer11>;
+ #pwm-cells = <3>;
+ };
+
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
};
- tv0: connector@1 {
+ tv0: connector {
compatible = "svideo-connector";
label = "tv";
port@0 {
reg = <0>;
- opa_in: endpoint@0 {
+ opa_in: endpoint {
remote-endpoint = <&venc_out>;
};
};
port@1 {
reg = <1>;
- opa_out: endpoint@0 {
+ opa_out: endpoint {
remote-endpoint = <&tv_connector_in>;
};
};
};
};
+
+ wifi_pwrseq: wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&tca6507 0 GPIO_ACTIVE_LOW>; /* W2CBW003 reset through tca6507 */
+ };
};
&omap3_pmx_core {
>;
};
+ backlight_pins: backlight_pins_pimnux {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20ba, MUX_MODE3) /* gpt11/gpio57 */
+ >;
+ };
+
dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda.hdq */
>;
};
+
+ bma180_pins: pinmux_bma180_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213a, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio115 */
+ >;
+ };
+
+ itg3200_pins: pinmux_itg3200_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio56 */
+ >;
+ };
+
+ hmc5843_pins: pinmux_hmc5843_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2134, PIN_INPUT_PULLUP | MUX_MODE4) /* gpio112 */
+ >;
+ };
};
&omap3_pmx_core2 {
bma180@41 {
compatible = "bosch,bma180";
reg = <0x41>;
+ pinctrl-names = "default";
+ pintcrl-0 = <&bma180_pins>;
interrupt-parent = <&gpio4>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
};
itg3200@68 {
compatible = "invensense,itg3200";
reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&itg3200_pins>;
interrupt-parent = <&gpio2>;
- interrupts = <24 0>; /* GPIO_56 */
+ interrupts = <24 IRQ_TYPE_EDGE_FALLING>; /* GPIO_56 */
};
- /* leds */
- tca6507@45 {
+ /* leds + gpios */
+ tca6507: tca6507@45 {
compatible = "ti,tca6507";
#address-cells = <1>;
#size-cells = <0>;
hmc5843@1e {
compatible = "honeywell,hmc5883l";
reg = <0x1e>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hmc5843_pins>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>; /* gpio112 */
};
/* touchscreen */
gpios = <&gpio6 0 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = <600>;
};
+
+ /* RFID EEPROM */
+ m24lr64@50 {
+ compatible = "at,24c64";
+ reg = <0x50>;
+ };
};
&i2c3 {
bus-width = <4>;
ti,non-removable;
cap-power-off-card;
+ mmc-pwrseq = <&wifi_pwrseq>;
};
&mmc3 {
display0 = &lcd0;
};
- lcd0: display@0 {
+ lcd0: display {
compatible = "panel-dpi";
label = "lcd";
vcc-supply = <&hsusb1_power>;
};
- tfp410: encoder@0 {
+ tfp410: encoder {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
port@0 {
reg = <0>;
- tfp410_in: endpoint@0 {
+ tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
- tfp410_out: endpoint@0 {
+ tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
- dvi0: connector@0 {
+ dvi0: connector {
compatible = "dvi-connector";
label = "dvi";
io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
io-channel-names = "temp", "bsi", "vbat";
};
+
+ pwm9: dmtimer-pwm {
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer9>;
+ ti,clock-source = <0x00>; /* timer_sys_ck */
+ };
+
+ ir: n900-ir {
+ compatible = "nokia,n900-ir";
+ pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
+ };
};
&omap3_pmx_core {
display0 = &dvi0;
};
- tfp410: encoder@0 {
+ tfp410: encoder {
compatible = "ti,tfp410";
ports {
port@0 {
reg = <0>;
- tfp410_in: endpoint@0 {
+ tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
- tfp410_out: endpoint@0 {
+ tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
- dvi0: connector@0 {
+ dvi0: connector {
compatible = "dvi-connector";
label = "dvi";
pinctrl-names = "default";
pinctrl-0 = <&mcspi1_pins>;
- lcd0: display@0 {
+ lcd0: display {
compatible = "lgphilips,lb035q02";
label = "lcd35";
display0 = &lcd0;
};
- lcd0: display@0 {
+ lcd0: display {
compatible = "samsung,lte430wq-f0c", "panel-dpi";
label = "lcd43";
display0 = &lcd;
};
- tv: connector@1 {
+ tv: connector {
compatible = "connector-analog-tv";
label = "tv";
*/
/ {
- tfp410: encoder@0 {
+ tfp410: encoder {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
port@0 {
reg = <0>;
- tfp410_in: endpoint@0 {
+ tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
- tfp410_out: endpoint@0 {
+ tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
- dvi0: connector@0 {
+ dvi0: connector {
compatible = "dvi-connector";
label = "dvi";
display0 = &lcd0;
};
- lcd0: display@0 {
+ lcd0: display {
compatible = "samsung,lte430wq-f0c", "panel-dpi";
label = "lcd";
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
+ clocks = <&mcbsp1_fck>;
+ clock-names = "fck";
status = "disabled";
};
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
+ clocks = <&mcbsp2_fck>, <&mcbsp2_ick>;
+ clock-names = "fck", "ick";
status = "disabled";
};
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
+ clocks = <&mcbsp3_fck>, <&mcbsp3_ick>;
+ clock-names = "fck", "ick";
status = "disabled";
};
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
+ clocks = <&mcbsp4_fck>;
+ clock-names = "fck";
status = "disabled";
};
dmas = <&sdma 21>,
<&sdma 22>;
dma-names = "tx", "rx";
+ clocks = <&mcbsp5_fck>;
+ clock-names = "fck";
status = "disabled";
};
};
};
- hdmi0: connector@0 {
+ hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
twl6040: twl@4b {
compatible = "ti,twl6040";
+ #clock-cells = <0>;
reg = <0x4b>;
interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_2N cascaded to gic */
ti,audpwron-gpio = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* gpio_160 */
&mcpdm {
pinctrl-names = "default";
pinctrl-0 = <&mcpdm_pins>;
+
+ clocks = <&twl6040>;
+ clock-names = "pdmclk";
+
status = "okay";
};
enable-active-high;
};
- tfp410: encoder@0 {
+ tfp410: encoder0 {
compatible = "ti,tfp410";
powerdown-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; /* gpio_0 */
port@0 {
reg = <0>;
- tfp410_in: endpoint@0 {
+ tfp410_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
port@1 {
reg = <1>;
- tfp410_out: endpoint@0 {
+ tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
- dvi0: connector@0 {
+ dvi0: connector0 {
compatible = "dvi-connector";
label = "dvi";
};
};
- tpd12s015: encoder@1 {
+ tpd12s015: encoder1 {
compatible = "ti,tpd12s015";
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
port@0 {
reg = <0>;
- tpd12s015_in: endpoint@0 {
+ tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
- tpd12s015_out: endpoint@0 {
+ tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
- hdmi0: connector@1 {
+ hdmi0: connector1 {
compatible = "hdmi-connector";
label = "hdmi";
twl6040: twl@4b {
compatible = "ti,twl6040";
+ #clock-cells = <0>;
reg = <0x4b>;
pinctrl-names = "default";
&mcpdm {
pinctrl-names = "default";
pinctrl-0 = <&mcpdm_pins>;
+
+ clocks = <&twl6040>;
+ clock-names = "pdmclk";
+
status = "okay";
};
enable-active-high;
};
- tpd12s015: encoder@0 {
+ tpd12s015: encoder {
compatible = "ti,tpd12s015";
gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>, /* 60, CT CP HPD */
port@0 {
reg = <0>;
- tpd12s015_in: endpoint@0 {
+ tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
- tpd12s015_out: endpoint@0 {
+ tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
- hdmi0: connector@0 {
+ hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
twl6040: twl@4b {
compatible = "ti,twl6040";
+ #clock-cells = <0>;
reg = <0x4b>;
pinctrl-names = "default";
&mcpdm {
pinctrl-names = "default";
pinctrl-0 = <&mcpdm_pins>;
+
+ clocks = <&twl6040>;
+ clock-names = "pdmclk";
+
status = "okay";
};
};
};
- hdmi0: connector@0 {
+ hdmi0: connector {
compatible = "hdmi-connector";
pinctrl-names = "default";
pinctrl-0 = <&hdmi_hpd_pins>;
twl6040: twl@4b {
compatible = "ti,twl6040";
+ #clock-cells = <0>;
reg = <0x4b>;
pinctrl-names = "default";
&mcpdm {
pinctrl-names = "default";
pinctrl-0 = <&mcpdm_pins>;
+
+ clocks = <&twl6040>;
+ clock-names = "pdmclk";
+
status = "okay";
};
};
};
- tpd12s015: encoder@0 {
+ tpd12s015: encoder {
compatible = "ti,tpd12s015";
pinctrl-names = "default";
port@0 {
reg = <0>;
- tpd12s015_in: endpoint@0 {
+ tpd12s015_in: endpoint {
remote-endpoint = <&hdmi_out>;
};
};
port@1 {
reg = <1>;
- tpd12s015_out: endpoint@0 {
+ tpd12s015_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
- hdmi0: connector@0 {
+ hdmi0: connector {
compatible = "hdmi-connector";
label = "hdmi";
twl6040: twl@4b {
compatible = "ti,twl6040";
+ #clock-cells = <0>;
reg = <0x4b>;
pinctrl-names = "default";
&mcpdm {
pinctrl-names = "default";
pinctrl-0 = <&mcpdm_pins>;
+
+ clocks = <&twl6040>;
+ clock-names = "pdmclk";
+
status = "okay";
};
};
};
- hdmi0: connector@0 {
+ hdmi0: connector0 {
compatible = "hdmi-connector";
label = "hdmi";
};
};
- tfp410: encoder@0 {
+ tfp410: encoder0 {
compatible = "ti,tfp410";
ports {
port@0 {
reg = <0>;
- tfp410_in: endpoint@0 {
+ tfp410_in: endpoint {
remote-endpoint = <&dpi_dvi_out>;
};
};
port@1 {
reg = <1>;
- tfp410_out: endpoint@0 {
+ tfp410_out: endpoint {
remote-endpoint = <&dvi_connector_in>;
};
};
};
};
- dvi0: connector@1 {
+ dvi0: connector1 {
compatible = "dvi-connector";
label = "dvi";
pinctrl-0 = <&dss_dpi_pins>;
port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
dpi_dvi_out: endpoint@0 {
+ reg = <0>;
remote-endpoint = <&tfp410_in>;
data-lines = <24>;
};
dpi_lcd_out: endpoint@1 {
+ reg = <1>;
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
--- /dev/null
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include "qcom-msm8660.dtsi"
+
+/ {
+ model = "Qualcomm APQ8060 Dragonboard";
+ compatible = "qcom,apq8060-dragonboard", "qcom,msm8660";
+
+ aliases {
+ serial0 = &gsbi12_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ /* Main power of the board: 3.7V */
+ vph: regulator-fixed {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-name = "VPH";
+ regulator-type = "voltage";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* This is a levelshifter for SDCC5 */
+ dragon_vio_txb: txb0104rgyr {
+ compatible = "regulator-fixed";
+ regulator-name = "Dragon SDCC levelshifter";
+ vin-supply = <&pm8058_l14>;
+ regulator-always-on;
+ };
+ };
+
+ soc {
+ pinctrl@800000 {
+ /* eMMMC pins, all 8 data lines connected */
+ dragon_sdcc1_pins: sdcc1 {
+ mux {
+ pins = "gpio159", "gpio160", "gpio161",
+ "gpio162", "gpio163", "gpio164",
+ "gpio165", "gpio166", "gpio167",
+ "gpio168";
+ function = "sdc1";
+ };
+ clk {
+ pins = "gpio167"; /* SDC5 CLK */
+ drive-strength = <16>;
+ bias-disable;
+ };
+ cmd {
+ pins = "gpio168"; /* SDC5 CMD */
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ data {
+ /* SDC5 D0 to D7 */
+ pins = "gpio159", "gpio160", "gpio161", "gpio162",
+ "gpio163", "gpio164", "gpio165", "gpio166";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ /*
+ * The SDCC3 pins are hardcoded (non-muxable) but need some pin
+ * configuration.
+ */
+ dragon_sdcc3_pins: sdcc3 {
+ clk {
+ pins = "sdc3_clk";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ cmd {
+ pins = "sdc3_cmd";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ data {
+ pins = "sdc3_data";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ /* Second SD card slot pins */
+ dragon_sdcc5_pins: sdcc5 {
+ mux {
+ pins = "gpio95", "gpio96", "gpio97",
+ "gpio98", "gpio99", "gpio100";
+ function = "sdc5";
+ };
+ clk {
+ pins = "gpio97"; /* SDC5 CLK */
+ drive-strength = <16>;
+ bias-disable;
+ };
+ cmd {
+ pins = "gpio95"; /* SDC5 CMD */
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ data {
+ /* SDC5 D0 to D3 */
+ pins = "gpio96", "gpio98", "gpio99", "gpio100";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ dragon_gsbi12_i2c_pins: gsbi12_i2c {
+ mux {
+ pins = "gpio115", "gpio116";
+ function = "gsbi12";
+ };
+ pinconf {
+ pins = "gpio115", "gpio116";
+ drive-strength = <16>;
+ /* These have external pull-up 4.7kOhm to 1.8V */
+ bias-disable;
+ };
+ };
+
+ /* Primary serial port uart 0 pins */
+ dragon_gsbi12_serial_pins: gsbi12_serial {
+ mux {
+ pins = "gpio117", "gpio118";
+ function = "gsbi12";
+ };
+ tx {
+ pins = "gpio117";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ rx {
+ pins = "gpio118";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+ };
+
+ qcom,ssbi@500000 {
+ pmic@0 {
+ keypad@148 {
+ linux,keymap = <
+ MATRIX_KEY(0, 0, KEY_MENU)
+ MATRIX_KEY(0, 2, KEY_1)
+ MATRIX_KEY(0, 3, KEY_4)
+ MATRIX_KEY(0, 4, KEY_7)
+ MATRIX_KEY(1, 0, KEY_UP)
+ MATRIX_KEY(1, 1, KEY_LEFT)
+ MATRIX_KEY(1, 2, KEY_DOWN)
+ MATRIX_KEY(1, 3, KEY_5)
+ MATRIX_KEY(1, 3, KEY_8)
+ MATRIX_KEY(2, 0, KEY_HOME)
+ MATRIX_KEY(2, 1, KEY_REPLY)
+ MATRIX_KEY(2, 2, KEY_2)
+ MATRIX_KEY(2, 3, KEY_6)
+ MATRIX_KEY(3, 0, KEY_VOLUMEUP)
+ MATRIX_KEY(3, 1, KEY_RIGHT)
+ MATRIX_KEY(3, 2, KEY_3)
+ MATRIX_KEY(3, 3, KEY_9)
+ MATRIX_KEY(3, 4, KEY_SWITCHVIDEOMODE)
+ MATRIX_KEY(4, 0, KEY_VOLUMEDOWN)
+ MATRIX_KEY(4, 1, KEY_BACK)
+ MATRIX_KEY(4, 2, KEY_CAMERA)
+ MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
+ >;
+ keypad,num-rows = <6>;
+ keypad,num-columns = <5>;
+ };
+
+ gpio@150 {
+ dragon_bmp085_gpios: bmp085-gpios {
+ pinconf {
+ pins = "gpio16";
+ function = "normal";
+ input-enable;
+ bias-disable;
+ power-source = <PM8058_GPIO_S3>;
+ };
+ };
+ dragon_sdcc3_gpios: sdcc3-gpios {
+ pinconf {
+ pins = "gpio22";
+ function = "normal";
+ input-enable;
+ bias-disable;
+ power-source = <PM8058_GPIO_S3>;
+ };
+ };
+ dragon_sdcc5_gpios: sdcc5-gpios {
+ pinconf {
+ pins = "gpio26";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_30>;
+ power-source = <PM8058_GPIO_S3>;
+ };
+ };
+ dragon_ak8975_gpios: ak8975-gpios {
+ pinconf {
+ pins = "gpio33";
+ function = "normal";
+ input-enable;
+ bias-disable;
+ power-source = <PM8058_GPIO_S3>;
+ };
+ };
+ };
+ };
+ };
+
+ gsbi@19c00000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+
+ serial@19c40000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_gsbi12_serial_pins>;
+ };
+
+ i2c@19c80000 {
+ status = "ok";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_gsbi12_i2c_pins>;
+
+ ak8975@0c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+ /* GPIO33 has interrupt 224 on the PM8058 */
+ interrupt-parent = <&pm8058_gpio>;
+ interrupts = <224 IRQ_TYPE_EDGE_RISING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_ak8975_gpios>;
+ vid-supply = <&pm8058_lvs0>; // 1.8V
+ vdd-supply = <&pm8058_l14>; // 2.85V
+ };
+ bmp085@77 {
+ compatible = "bosch,bmp085";
+ reg = <0x77>;
+ /* GPIO16 has interrupt 207 on the PM8058 */
+ interrupt-parent = <&pm8058_gpio>;
+ interrupts = <207 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_bmp085_gpios>;
+ vddd-supply = <&pm8058_lvs0>; // 1.8V
+ vdda-supply = <&pm8058_l14>; // 2.85V
+ };
+ };
+ };
+
+ rpm@104000 {
+ /*
+ * Set up of the PMIC RPM regulators for this board
+ * PM8901 supplies "preliminary regulators" whatever
+ * that means
+ */
+ pm8901-regulators {
+ vdd_l0-supply = <&pm8901_s4>;
+ vdd_l1-supply = <&vph>;
+ vdd_l2-supply = <&vph>;
+ vdd_l3-supply = <&vph>;
+ vdd_l4-supply = <&vph>;
+ vdd_l5-supply = <&vph>;
+ vdd_l6-supply = <&vph>;
+ /* vdd_s0-supply, vdd_s1-supply: SAW regulators */
+ vdd_s2-supply = <&vph>;
+ vdd_s3-supply = <&vph>;
+ vdd_s4-supply = <&vph>;
+ lvs0_in-supply = <&pm8058_s3>;
+ lvs1_in-supply = <&pm8901_s4>;
+ lvs2_in-supply = <&pm8058_l0>;
+ lvs3_in-supply = <&pm8058_s2>;
+ mvs_in-supply = <&pm8058_s3>;
+
+ l0 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+ l1 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+ l2 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+ l3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+ l4 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2600000>;
+ bias-pull-down;
+ };
+ l5 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+ l6 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ bias-pull-down;
+ };
+
+ /* s0 and s1 are SAW regulators controlled over SPM */
+ s2 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+ s3 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+ s4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+
+ /* LVS0 thru 3 and mvs0 are just switches */
+ lvs0 {
+ regulator-always-on;
+ };
+ lvs1 { };
+ lvs2 { };
+ lvs3 { };
+ mvs0 {};
+
+ };
+
+ pm8058-regulators {
+ vdd_l0_l1_lvs-supply = <&pm8058_s3>;
+ vdd_l2_l11_l12-supply = <&vph>;
+ vdd_l3_l4_l5-supply = <&vph>;
+ vdd_l6_l7-supply = <&vph>;
+ vdd_l8-supply = <&vph>;
+ vdd_l9-supply = <&vph>;
+ vdd_l10-supply = <&vph>;
+ vdd_l13_l16-supply = <&pm8058_s4>;
+ vdd_l14_l15-supply = <&vph>;
+ vdd_l17_l18-supply = <&vph>;
+ vdd_l19_l20-supply = <&vph>;
+ vdd_l21-supply = <&pm8058_s3>;
+ vdd_l22-supply = <&pm8058_s3>;
+ vdd_l23_l24_l25-supply = <&pm8058_s3>;
+ vdd_s0-supply = <&vph>;
+ vdd_s1-supply = <&vph>;
+ vdd_s2-supply = <&vph>;
+ vdd_s3-supply = <&vph>;
+ vdd_s4-supply = <&vph>;
+ vdd_ncp-supply = <&vph>;
+
+ l0 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+ l1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+ l2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2600000>;
+ bias-pull-down;
+ };
+ l3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+ l4 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+ l5 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+ l6 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3600000>;
+ bias-pull-down;
+ };
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+ l8 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3050000>;
+ bias-pull-down;
+ };
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+ l10 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2600000>;
+ bias-pull-down;
+ };
+ l11 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ bias-pull-down;
+ };
+ l12 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ bias-pull-down;
+ };
+ l13 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ bias-pull-down;
+ };
+ l14 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+ l15 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ bias-pull-down;
+ };
+ l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ regulator-always-on;
+ };
+ l17 {
+ // 1.5V according to schematic
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2600000>;
+ bias-pull-down;
+ };
+ l18 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ bias-pull-down;
+ };
+ l19 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ bias-pull-down;
+ };
+ l20 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+ l21 {
+ // 1.1 V according to schematic
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ regulator-always-on;
+ };
+ l22 {
+ // 1.2 V according to schematic
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ bias-pull-down;
+ };
+ l23 {
+ // Unused
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+ l24 {
+ // Unused
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+ l25 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ bias-pull-down;
+ };
+
+ s0 {
+ // regulator-min-microvolt = <500000>;
+ // regulator-max-microvolt = <1325000>;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+ s1 {
+ // regulator-min-microvolt = <500000>;
+ // regulator-max-microvolt = <1250000>;
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+ s2 {
+ // 1.3 V according to schematic
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1400000>;
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+ };
+ s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ regulator-always-on;
+ bias-pull-down;
+ };
+ s4 {
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ qcom,switch-mode-frequency = <1600000>;
+ regulator-always-on;
+ bias-pull-down;
+ };
+
+ /* LVS0 and LVS1 are just switches */
+ lvs0 {
+ bias-pull-down;
+ };
+ lvs1 {
+ bias-pull-down;
+ };
+
+ ncp {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ };
+ };
+ };
+ amba {
+ /* Internal 3.69 GiB eMMC */
+ sdcc@12400000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_sdcc1_pins>;
+ vmmc-supply = <&pm8901_l5>;
+ vqmmc-supply = <&pm8901_lvs0>;
+ };
+
+ /* External micro SD card, directly connected, pulled up to 2.85 V */
+ sdcc@12180000 {
+ status = "okay";
+ /* Enable SSBI GPIO 22 as input, use for card detect */
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_sdcc3_pins>, <&dragon_sdcc3_gpios>;
+ cd-gpios = <&pm8058_gpio 22 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&pm8058_l14>;
+ };
+
+ /*
+ * Second external micro SD card, using two TXB104RGYR levelshifters
+ * to lift from 1.8 V to 2.85 V
+ */
+ sdcc@12200000 {
+ status = "okay";
+ /* Enable SSBI GPIO 26 as input, use for card detect */
+ pinctrl-names = "default";
+ pinctrl-0 = <&dragon_sdcc5_pins>, <&dragon_sdcc5_gpios>;
+ cd-gpios = <&pm8058_gpio 26 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&tlmm 106 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <&pm8058_l14>;
+ vqmmc-supply = <&dragon_vio_txb>;
+ };
+ };
+ };
+};
+++ /dev/null
-&tlmm_pinmux {
- card_detect: card-detect {
- mux {
- pins = "gpio26";
- function = "gpio";
- bias-disable;
- };
- };
-
- pcie_pins: pcie-pinmux {
- mux {
- pins = "gpio27";
- function = "gpio";
- };
- conf {
- pins = "gpio27";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- user_leds: user-leds {
- mux {
- pins = "gpio3", "gpio7", "gpio10", "gpio11";
- function = "gpio";
- };
-
- conf {
- pins = "gpio3", "gpio7", "gpio10", "gpio11";
- function = "gpio";
- output-low;
- };
- };
-
- magneto_pins: magneto-pins {
- mux {
- pins = "gpio31", "gpio48";
- function = "gpio";
- bias-disable;
- };
- };
-};
-
-&pm8921_mpps {
- mpp_leds: mpp-leds {
- pinconf {
- pins = "mpp7", "mpp8";
- function = "digital";
- output-low;
- };
- };
-};
+++ /dev/null
-#include "qcom-apq8064-v2.0.dtsi"
-#include "qcom-apq8064-arrow-db600c-pins.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Arrow Electronics, APQ8064 DB600c";
- compatible = "arrow,db600c", "qcom,apq8064";
-
- aliases {
- serial0 = &gsbi7_serial;
- serial1 = &gsbi1_serial;
- i2c0 = &gsbi2_i2c;
- i2c1 = &gsbi3_i2c;
- i2c2 = &gsbi4_i2c;
- i2c3 = &gsbi7_i2c;
- spi0 = &gsbi5_spi;
- };
-
- regulators {
- compatible = "simple-bus";
- vph: regulator-fixed@1 {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <4500000>;
- regulator-max-microvolt = <4500000>;
- regulator-name = "VPH";
- regulator-type = "voltage";
- regulator-boot-on;
- };
-
- /* on board fixed 3.3v supply */
- vcc3v3: vcc3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- };
-
- soc {
- rpm@108000 {
- regulators {
- vdd_s1-supply = <&vph>;
- vdd_s2-supply = <&vph>;
- vdd_s3-supply = <&vph>;
- vdd_s4-supply = <&vph>;
- vdd_s5-supply = <&vph>;
- vdd_s6-supply = <&vph>;
- vdd_s7-supply = <&vph>;
- vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
- vdd_l3_l15_l17-supply = <&vph>;
- vdd_l4_l14-supply = <&vph>;
- vdd_l5_l8_l16-supply = <&vph>;
- vdd_l6_l7-supply = <&vph>;
- vdd_l9_l11-supply = <&vph>;
- vdd_l10_l22-supply = <&vph>;
- vdd_l21_l23_l29-supply = <&vph>;
- vdd_l24-supply = <&pm8921_s1>;
- vdd_l25-supply = <&pm8921_s1>;
- vdd_l26-supply = <&pm8921_s7>;
- vdd_l27-supply = <&pm8921_s7>;
- vdd_l28-supply = <&pm8921_s7>;
- vin_lvs1_3_6-supply = <&pm8921_s4>;
- vin_lvs2-supply = <&pm8921_s1>;
- vin_lvs4_5_7-supply = <&pm8921_s4>;
-
- s1 {
- regulator-always-on;
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- qcom,switch-mode-frequency = <3200000>;
- bias-pull-down;
- };
-
- s3 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1400000>;
- qcom,switch-mode-frequency = <4800000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,switch-mode-frequency = <3200000>;
- bias-pull-down;
- regulator-always-on;
- };
-
- s7 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- qcom,switch-mode-frequency = <3200000>;
- };
-
- l3 {
- regulator-min-microvolt = <3050000>;
- regulator-max-microvolt = <3300000>;
- bias-pull-down;
- };
-
- l4 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1800000>;
- bias-pull-down;
- };
-
- l5 {
- regulator-min-microvolt = <2750000>;
- regulator-max-microvolt = <3000000>;
- bias-pull-down;
- regulator-boot-on;
- regulator-always-on;
- };
-
- l6 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- bias-pull-down;
- };
-
- l23 {
- regulator-min-microvolt = <1700000>;
- regulator-max-microvolt = <1900000>;
- bias-pull-down;
- };
-
- lvs6 {
- bias-pull-down;
- };
-
- lvs7 {
- bias-pull-down;
- };
- };
- };
-
- gsbi@12440000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_UART_W_FC>;
- serial@12450000 {
- label = "LS-UART1";
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&gsbi1_uart_4pins>;
- };
- };
-
- gsbi@12480000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
- i2c@124a0000 {
- /* On Low speed expansion and Sensors */
- label = "LS-I2C0";
- status = "okay";
- lis3mdl_mag@1e {
- compatible = "st,lis3mdl-magn";
- reg = <0x1e>;
- vdd-supply = <&vcc3v3>;
- vddio-supply = <&pm8921_s4>;
- pinctrl-names = "default";
- pinctrl-0 = <&magneto_pins>;
- interrupt-parent = <&tlmm_pinmux>;
-
- st,drdy-int-pin = <2>;
- interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
- <31 IRQ_TYPE_EDGE_RISING>; /* INT */
- };
- };
- };
-
- gsbi@16200000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
- i2c@16280000 {
- /* On Low speed expansion */
- status = "okay";
- label = "LS-I2C1";
- clock-frequency = <200000>;
- eeprom@52 {
- compatible = "atmel,24c128";
- reg = <0x52>;
- pagesize = <64>;
- };
- };
- };
-
- gsbi@16300000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C>;
- i2c@16380000 {
- /* On High speed expansion */
- label = "HS-CAM-I2C3";
- status = "okay";
- };
- };
-
- gsbi@1a200000 {
- status = "okay";
- spi@1a280000 {
- /* On Low speed expansion */
- label = "LS-SPI0";
- status = "okay";
- };
- };
-
- /* DEBUG UART */
- gsbi@16600000 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C_UART>;
- serial@16640000 {
- label = "LS-UART0";
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&gsbi7_uart_2pins>;
- };
-
- i2c@16680000 {
- /* On High speed expansion */
- status = "okay";
- label = "HS-CAM-I2C2";
- };
- };
-
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&user_leds>, <&mpp_leds>;
-
- compatible = "gpio-leds";
-
- user-led0 {
- label = "user0-led";
- gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
-
- user-led1 {
- label = "user1-led";
- gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
- default-state = "off";
- };
-
- user-led2 {
- label = "user2-led";
- gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc1";
- default-state = "off";
- };
-
- user-led3 {
- label = "user3-led";
- gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "none";
- default-state = "off";
- };
-
- wifi-led {
- label = "WiFi-led";
- gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- bt-led {
- label = "BT-led";
- gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- pci@1b500000 {
- status = "okay";
- vdda-supply = <&pm8921_s3>;
- vdda_phy-supply = <&pm8921_lvs6>;
- vdda_refclk-supply = <&vcc3v3>;
- pinctrl-0 = <&pcie_pins>;
- pinctrl-names = "default";
- perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
- };
-
- phy@1b400000 {
- status = "okay";
- };
-
- sata@29000000 {
- status = "okay";
- target-supply = <&pm8921_lvs7>;
- };
-
- /* OTG */
- phy@12500000 {
- status = "okay";
- dr_mode = "peripheral";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l4>;
- };
-
- phy@12520000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
-
- phy@12530000 {
- status = "okay";
- vddcx-supply = <&pm8921_s3>;
- v3p3-supply = <&pm8921_l3>;
- v1p8-supply = <&pm8921_l23>;
- };
-
- gadget@12500000 {
- status = "okay";
- };
-
- /* OTG */
- usb@12500000 {
- status = "okay";
- };
-
- usb@12520000 {
- status = "okay";
- };
-
- usb@12530000 {
- status = "okay";
- };
-
- amba {
- /* eMMC */
- sdcc@12400000 {
- status = "okay";
- vmmc-supply = <&pm8921_l5>;
- vqmmc-supply = <&pm8921_s4>;
- };
-
- /* External micro SD card */
- sdcc@12180000 {
- status = "okay";
- vmmc-supply = <&pm8921_l6>;
- pinctrl-names = "default";
- pinctrl-0 = <&card_detect>;
- cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
- };
- };
-};
--- /dev/null
+&tlmm_pinmux {
+ card_detect: card-detect {
+ mux {
+ pins = "gpio26";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+
+ pcie_pins: pcie-pinmux {
+ mux {
+ pins = "gpio27";
+ function = "gpio";
+ };
+ conf {
+ pins = "gpio27";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
+ user_leds: user-leds {
+ mux {
+ pins = "gpio3", "gpio7", "gpio10", "gpio11";
+ function = "gpio";
+ };
+
+ conf {
+ pins = "gpio3", "gpio7", "gpio10", "gpio11";
+ function = "gpio";
+ output-low;
+ };
+ };
+
+ magneto_pins: magneto-pins {
+ mux {
+ pins = "gpio31", "gpio48";
+ function = "gpio";
+ bias-disable;
+ };
+ };
+};
+
+&pm8921_mpps {
+ mpp_leds: mpp-leds {
+ pinconf {
+ pins = "mpp7", "mpp8";
+ function = "digital";
+ output-low;
+ };
+ };
+};
--- /dev/null
+#include "qcom-apq8064-v2.0.dtsi"
+#include "qcom-apq8064-arrow-sd-600eval-pins.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+
+/ {
+ model = "Arrow Electronics, APQ8064 SD_600eval";
+ compatible = "arrow,sd_600eval", "qcom,apq8064";
+
+ aliases {
+ serial0 = &gsbi7_serial;
+ serial1 = &gsbi1_serial;
+ i2c0 = &gsbi2_i2c;
+ i2c1 = &gsbi3_i2c;
+ i2c2 = &gsbi4_i2c;
+ i2c3 = &gsbi7_i2c;
+ spi0 = &gsbi5_spi;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ vph: regulator-fixed@1 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <4500000>;
+ regulator-max-microvolt = <4500000>;
+ regulator-name = "VPH";
+ regulator-type = "voltage";
+ regulator-boot-on;
+ };
+
+ /* on board fixed 3.3v supply */
+ vcc3v3: vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ };
+
+ soc {
+ rpm@108000 {
+ regulators {
+ vdd_s1-supply = <&vph>;
+ vdd_s2-supply = <&vph>;
+ vdd_s3-supply = <&vph>;
+ vdd_s4-supply = <&vph>;
+ vdd_s5-supply = <&vph>;
+ vdd_s6-supply = <&vph>;
+ vdd_s7-supply = <&vph>;
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vdd_l3_l15_l17-supply = <&vph>;
+ vdd_l4_l14-supply = <&vph>;
+ vdd_l5_l8_l16-supply = <&vph>;
+ vdd_l6_l7-supply = <&vph>;
+ vdd_l9_l11-supply = <&vph>;
+ vdd_l10_l22-supply = <&vph>;
+ vdd_l21_l23_l29-supply = <&vph>;
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vdd_l26-supply = <&pm8921_s7>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs2-supply = <&pm8921_s1>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+ s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ qcom,switch-mode-frequency = <4800000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <1600000>;
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ bias-pull-down;
+ regulator-always-on;
+ };
+
+ s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <3050000>;
+ regulator-max-microvolt = <3300000>;
+ bias-pull-down;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ l5 {
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ bias-pull-down;
+ };
+
+ l23 {
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1900000>;
+ bias-pull-down;
+ };
+
+ lvs6 {
+ bias-pull-down;
+ };
+
+ lvs7 {
+ bias-pull-down;
+ };
+ };
+ };
+
+ gsbi@12440000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_UART_W_FC>;
+ serial@12450000 {
+ label = "LS-UART1";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi1_uart_4pins>;
+ };
+ };
+
+ gsbi@12480000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+ i2c@124a0000 {
+ /* On Low speed expansion and Sensors */
+ label = "LS-I2C0";
+ status = "okay";
+ lis3mdl_mag@1e {
+ compatible = "st,lis3mdl-magn";
+ reg = <0x1e>;
+ vdd-supply = <&vcc3v3>;
+ vddio-supply = <&pm8921_s4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&magneto_pins>;
+ interrupt-parent = <&tlmm_pinmux>;
+
+ st,drdy-int-pin = <2>;
+ interrupts = <48 IRQ_TYPE_EDGE_RISING>, /* DRDY line */
+ <31 IRQ_TYPE_EDGE_RISING>; /* INT */
+ };
+ };
+ };
+
+ gsbi@16200000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+ i2c@16280000 {
+ /* On Low speed expansion */
+ status = "okay";
+ label = "LS-I2C1";
+ clock-frequency = <200000>;
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ pagesize = <64>;
+ };
+ };
+ };
+
+ gsbi@16300000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+ i2c@16380000 {
+ /* On High speed expansion */
+ label = "HS-CAM-I2C3";
+ status = "okay";
+ };
+ };
+
+ gsbi@1a200000 {
+ status = "okay";
+ spi@1a280000 {
+ /* On Low speed expansion */
+ label = "LS-SPI0";
+ status = "okay";
+ };
+ };
+
+ /* DEBUG UART */
+ gsbi@16600000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ serial@16640000 {
+ label = "LS-UART0";
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi7_uart_2pins>;
+ };
+
+ i2c@16680000 {
+ /* On High speed expansion */
+ status = "okay";
+ label = "HS-CAM-I2C2";
+ };
+ };
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds>, <&mpp_leds>;
+
+ compatible = "gpio-leds";
+
+ user-led0 {
+ label = "user0-led";
+ gpios = <&tlmm_pinmux 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ user-led1 {
+ label = "user1-led";
+ gpios = <&tlmm_pinmux 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ user-led2 {
+ label = "user2-led";
+ gpios = <&tlmm_pinmux 10 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc1";
+ default-state = "off";
+ };
+
+ user-led3 {
+ label = "user3-led";
+ gpios = <&tlmm_pinmux 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ default-state = "off";
+ };
+
+ wifi-led {
+ label = "WiFi-led";
+ gpios = <&pm8921_mpps 7 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ bt-led {
+ label = "BT-led";
+ gpios = <&pm8921_mpps 8 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ };
+
+ pci@1b500000 {
+ status = "okay";
+ vdda-supply = <&pm8921_s3>;
+ vdda_phy-supply = <&pm8921_lvs6>;
+ vdda_refclk-supply = <&vcc3v3>;
+ pinctrl-0 = <&pcie_pins>;
+ pinctrl-names = "default";
+ perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
+ };
+
+ phy@1b400000 {
+ status = "okay";
+ };
+
+ sata@29000000 {
+ status = "okay";
+ target-supply = <&pm8921_lvs7>;
+ };
+
+ /* OTG */
+ phy@12500000 {
+ status = "okay";
+ dr_mode = "peripheral";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ phy@12520000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ phy@12530000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l23>;
+ };
+
+ gadget@12500000 {
+ status = "okay";
+ };
+
+ /* OTG */
+ usb@12500000 {
+ status = "okay";
+ };
+
+ usb@12520000 {
+ status = "okay";
+ };
+
+ usb@12530000 {
+ status = "okay";
+ };
+
+ amba {
+ /* eMMC */
+ sdcc@12400000 {
+ status = "okay";
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
+ };
+
+ /* External micro SD card */
+ sdcc@12180000 {
+ status = "okay";
+ vmmc-supply = <&pm8921_l6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&card_detect>;
+ cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_HIGH>;
+ };
+ };
+ };
+};
gpio-keys {
compatible = "gpio-keys";
- power {
- label = "Power";
- gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- gpio-key,wakeup;
- };
volume_up {
label = "Volume Up";
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
};
};
+ sdcc1_pins: sdcc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strengh = <16>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc1_cmd";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc1_data";
+ drive-strengh = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdcc3_pins: sdcc3-pin-active {
+ clk {
+ pins = "sdc3_clk";
+ drive-strengh = <8>;
+ bias-disable;
+ };
+
+ cmd {
+ pins = "sdc3_cmd";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+
+ data {
+ pins = "sdc3_data";
+ drive-strengh = <8>;
+ bias-pull-up;
+ };
+ };
+
ps_hold: ps_hold {
mux {
pins = "gpio78";
};
};
- sdcc1_pin_a: sdcc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strengh = <16>;
- bias-disable;
- };
-
- cmd {
- pins = "sdc1_cmd";
- drive-strengh = <10>;
- bias-pull-up;
- };
-
- data {
- pins = "sdc1_data";
- drive-strengh = <10>;
- bias-pull-up;
- };
- };
-
- sdcc3_pin_a: sdcc3-pin-active {
- clk {
- pins = "sdc3_clk";
- drive-strengh = <8>;
- bias-disable;
- };
-
- cmd {
- pins = "sdc3_cmd";
- drive-strengh = <8>;
- bias-pull-up;
- };
-
- data {
- pins = "sdc3_data";
- drive-strengh = <8>;
- bias-pull-up;
- };
- };
sdcc3_cd_pin_a: sdcc3-cd-pin-active {
pins = "gpio26";
vmmc-supply = <&pm8921_l5>;
vqmmc-supply = <&pm8921_s4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdcc1_pin_a>;
};
sdcc3: sdcc@12180000 {
cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>;
+ pinctrl-0 = <&sdcc3_pins>, <&sdcc3_cd_pin_a>;
};
};
};
apps_smsm: apps@0 {
reg = <0>;
- #qcom,state-cells = <1>;
+ #qcom,smem-state-cells = <1>;
};
modem_smsm: modem@1 {
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm-apq8064";
+ };
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
sdcc1: sdcc@12400000 {
status = "disabled";
compatible = "arm,pl18x", "arm,primecell";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdcc1_pins>;
arm,primecell-periphid = <0x00051180>;
reg = <0x12400000 0x2000>;
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <8>;
non-removable;
status = "ok";
+
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
};
sdhci@f98a4900 {
cd-gpios = <&msmgpio 62 0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>;
bus-width = <4>;
+ status = "ok";
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l13>;
};
function = "blsp_spi8";
};
};
+
+ sdhc1_pin_a: sdhc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc2_cd_pin_a: sdhc2-cd-pin-active {
+ pins = "gpio62";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdhc2_pin_a: sdhc2-pin-active {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+ };
};
i2c@f9967000 {
};
};
};
+
+ smd {
+ rpm {
+ rpm_requests {
+ pm8841-regulators {
+ s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ s4 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+ };
+
+ pm8941-regulators {
+ vdd_l1_l3-supply = <&pm8941_s1>;
+ vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
+ vdd_l4_l11-supply = <&pm8941_s1>;
+ vdd_l5_l7-supply = <&pm8941_s2>;
+ vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
+ vin_5vs-supply = <&pm8941_5v>;
+
+ s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ regulator-boot-on;
+ };
+
+ s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ l3 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-boot-on;
+ };
+
+ l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-allow-set-load;
+ regulator-boot-on;
+ regulator-system-load = <200000>;
+ };
+
+ l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-boot-on;
+ };
+
+ l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+ };
};
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm";
+ clocks = <&gcc GCC_CE1_CLK> , <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ };
+ };
+
cpu-pmu {
compatible = "qcom,krait-pmu";
interrupts = <1 7 0xf04>;
};
};
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
clocks {
sleep_clk: sleep_clk {
compatible = "fixed-clock";
};
};
+ /* Temporary fixed regulator */
+ vsdcc_fixed: vsdcc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "SDCC Power";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ regulator-always-on;
+ };
+
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
status = "okay";
+ vmmc-supply = <&vsdcc_fixed>;
};
/* External micro SD card */
sdcc3: sdcc@12180000 {
status = "okay";
+ vmmc-supply = <&vsdcc_fixed>;
};
};
};
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x19c40000 0x1000>,
<0x19c00000 0x1000>;
- interrupts = <0 195 0x0>;
+ interrupts = <0 195 IRQ_TYPE_NONE>;
clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
clock-names = "core", "iface";
status = "disabled";
};
+
+ gsbi12_i2c: i2c@19c80000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x19c80000 0x1000>;
+ interrupts = <0 196 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI12_QUP_CLK>, <&gcc GSBI12_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
qcom,ssbi@500000 {
#address-cells = <1>;
#size-cells = <0>;
+ pm8058_gpio: gpio@150 {
+ compatible = "qcom,pm8058-gpio",
+ "qcom,ssbi-gpio";
+ reg = <0x150>;
+ interrupt-parent = <&pmicintc>;
+ interrupts = <192 1>, <193 1>, <194 1>,
+ <195 1>, <196 1>, <197 1>,
+ <198 1>, <199 1>, <200 1>,
+ <201 1>, <202 1>, <203 1>,
+ <204 1>, <205 1>, <206 1>,
+ <207 1>, <208 1>, <209 1>,
+ <210 1>, <211 1>, <212 1>,
+ <213 1>, <214 1>, <215 1>,
+ <216 1>, <217 1>, <218 1>,
+ <219 1>, <220 1>, <221 1>,
+ <222 1>, <223 1>, <224 1>,
+ <225 1>, <226 1>, <227 1>,
+ <228 1>, <229 1>, <230 1>,
+ <231 1>, <232 1>, <233 1>,
+ <234 1>, <235 1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ };
+
+ pm8058_mpps: mpps@50 {
+ compatible = "qcom,pm8058-mpp",
+ "qcom,ssbi-mpp";
+ reg = <0x50>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&pmicintc>;
+ interrupts =
+ <128 1>, <129 1>, <130 1>, <131 1>,
+ <132 1>, <133 1>, <134 1>, <135 1>,
+ <136 1>, <137 1>, <138 1>, <139 1>;
+ };
+
pwrkey@1c {
compatible = "qcom,pm8058-pwrkey";
reg = <0x1c>;
row-hold = <91500>;
};
- rtc@11d {
+ rtc@1e8 {
compatible = "qcom,pm8058-rtc";
+ reg = <0x1e8>;
interrupt-parent = <&pmicintc>;
interrupts = <39 1>;
- reg = <0x11d>;
allow-set-time;
};
};
};
- /* Temporary fixed regulator */
- vsdcc_fixed: vsdcc-regulator {
- compatible = "regulator-fixed";
- regulator-name = "SDCC Power";
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- regulator-always-on;
+ l2cc: clock-controller@2082000 {
+ compatible = "syscon";
+ reg = <0x02082000 0x1000>;
+ };
+
+ rpm: rpm@104000 {
+ compatible = "qcom,rpm-msm8660";
+ reg = <0x00104000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "ack", "err", "wakeup";
+ clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+ clock-names = "ram";
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-apq8660", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ pm8901-regulators {
+ compatible = "qcom,rpm-pm8901-regulators";
+
+ pm8901_l0: l0 {};
+ pm8901_l1: l1 {};
+ pm8901_l2: l2 {};
+ pm8901_l3: l3 {};
+ pm8901_l4: l4 {};
+ pm8901_l5: l5 {};
+ pm8901_l6: l6 {};
+
+ /* S0 and S1 Handled as SAW regulators by SPM */
+ pm8901_s2: s2 {};
+ pm8901_s3: s3 {};
+ pm8901_s4: s4 {};
+
+ pm8901_lvs0: lvs0 {};
+ pm8901_lvs1: lvs1 {};
+ pm8901_lvs2: lvs2 {};
+ pm8901_lvs3: lvs3 {};
+
+ pm8901_mvs: mvs {};
+ };
+
+ pm8058-regulators {
+ compatible = "qcom,rpm-pm8058-regulators";
+
+ pm8058_l0: l0 {};
+ pm8058_l1: l1 {};
+ pm8058_l2: l2 {};
+ pm8058_l3: l3 {};
+ pm8058_l4: l4 {};
+ pm8058_l5: l5 {};
+ pm8058_l6: l6 {};
+ pm8058_l7: l7 {};
+ pm8058_l8: l8 {};
+ pm8058_l9: l9 {};
+ pm8058_l10: l10 {};
+ pm8058_l11: l11 {};
+ pm8058_l12: l12 {};
+ pm8058_l13: l13 {};
+ pm8058_l14: l14 {};
+ pm8058_l15: l15 {};
+ pm8058_l16: l16 {};
+ pm8058_l17: l17 {};
+ pm8058_l18: l18 {};
+ pm8058_l19: l19 {};
+ pm8058_l20: l20 {};
+ pm8058_l21: l21 {};
+ pm8058_l22: l22 {};
+ pm8058_l23: l23 {};
+ pm8058_l24: l24 {};
+ pm8058_l25: l25 {};
+
+ pm8058_s0: s0 {};
+ pm8058_s1: s1 {};
+ pm8058_s2: s2 {};
+ pm8058_s3: s3 {};
+ pm8058_s4: s4 {};
+
+ pm8058_lvs0: lvs0 {};
+ pm8058_lvs1: lvs1 {};
+
+ pm8058_ncp: ncp {};
+ };
};
amba {
non-removable;
cap-sd-highspeed;
cap-mmc-highspeed;
- vmmc-supply = <&vsdcc_fixed>;
};
sdcc3: sdcc@12180000 {
cap-mmc-highspeed;
max-frequency = <48000000>;
no-1-8-v;
- vmmc-supply = <&vsdcc_fixed>;
+ };
+
+ sdcc5: sdcc@12200000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ arm,primecell-periphid = <0x00051180>;
+ status = "disabled";
+ reg = <0x12200000 0x8000>;
+ interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
+ clocks = <&gcc SDC5_CLK>, <&gcc SDC5_H_CLK>;
+ clock-names = "mclk", "apb_pclk";
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <48000000>;
};
};
};
};
+
+ dma-controller@f9944000 {
+ qcom,controlled-remotely;
+ };
};
&spmi_bus {
/dts-v1/;
-#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
#include "skeleton.dtsi"
modem_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
- #qcom,state-cells = <1>;
+ #qcom,smem-state-cells = <1>;
};
modem_smp2p_in: slave-kernel {
wcnss_smp2p_out: master-kernel {
qcom,entry-name = "master-kernel";
- #qcom,state-cells = <1>;
+ #qcom,smem-state-cells = <1>;
};
wcnss_smp2p_in: slave-kernel {
apps_smsm: apps@0 {
reg = <0>;
- #qcom,state-cells = <1>;
+ #qcom,smem-state-cells = <1>;
};
modem_smsm: modem@1 {
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm";
+ clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
+ clock-names = "core", "bus", "iface";
+ };
+ };
+
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
clock-names = "core", "iface";
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
+ dma-names = "tx", "rx";
};
spmi_bus: spmi@fc4cf000 {
interrupt-controller;
#interrupt-cells = <4>;
};
+
+ blsp2_dma: dma-controller@f9944000 {
+ compatible = "qcom,bam-v1.4.0";
+ reg = <0xf9944000 0x19000>;
+ interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "bam_clk";
+ #dma-cells = <1>;
+ qcom,ee = <0>;
+ };
};
smd {
rtc@6000 {
compatible = "qcom,pm8941-rtc";
- reg = <0x6000 0x100>,
- <0x6100 0x100>;
+ reg = <0x6000>,
+ <0x6100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
+ pwrkey@800 {
+ compatible = "qcom,pm8941-pwrkey";
+ reg = <0x800>;
+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ };
+
pma8084_gpios: gpios@c000 {
compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
- reg = <0xc000 0x1600>;
+ reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
pma8084_mpps: mpps@a000 {
compatible = "qcom,pma8084-mpp", "qcom,spmi-mpp";
- reg = <0xa000 0x800>;
+ reg = <0xa000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
pma8084_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
- reg = <0x2400 0x100>;
+ reg = <0x2400>;
interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <0>;
io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
pma8084_vadc: vadc@3100 {
compatible = "qcom,spmi-vadc";
- reg = <0x3100 0x100>;
+ reg = <0x3100>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,genmai", "renesas,r7s72100";
aliases {
- serial2 = &scif2;
+ serial0 = &scif2;
};
chosen {
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
- stdout-path = &scif2;
+ stdout-path = "serial0:115200n8";
};
- memory {
+ memory@8000000 {
device_type = "memory";
reg = <0x08000000 0x08000000>;
};
reg = <2 0x00000000 0 0x40000000>;
};
- vcc_mmc0: regulator@0 {
+ vcc_mmc0: regulator-mmc0 {
compatible = "regulator-fixed";
regulator-name = "MMC0 Vcc";
regulator-min-microvolt = <2800000>;
regulator-always-on;
};
- vcc_sdhi0: regulator@1 {
+ vcc_sdhi0: regulator-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
};
/* Common 1.8V and 3.3V rails, used by several devices on APE6EVM */
- ape6evm_fixed_1v8: regulator@2 {
+ ape6evm_fixed_1v8: regulator-1v8 {
compatible = "regulator-fixed";
regulator-name = "1V8";
regulator-min-microvolt = <1800000>;
regulator-always-on;
};
- ape6evm_fixed_3v3: regulator@3 {
+ ape6evm_fixed_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
};
&pfc {
- scifa0_pins: serial0 {
+ scifa0_pins: scifa0 {
groups = "scifa0_data";
function = "scifa0";
};
- mmc0_pins: mmc {
+ mmc0_pins: mmc0 {
groups = "mmc0_data8", "mmc0_ctrl";
function = "mmc0";
};
power-domains = <&pd_a2sl>;
next-level-cache = <&L2_CA15>;
};
+
+ L2_CA15: cache-controller@0 {
+ compatible = "cache";
+ reg = <0>;
+ clocks = <&cpg_clocks R8A73A4_CLK_Z>;
+ power-domains = <&pd_a3sm>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA7: cache-controller@100 {
+ compatible = "cache";
+ reg = <0x100>;
+ clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
+ power-domains = <&pd_a3km>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
ptm {
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
- L2_CA15: cache-controller@0 {
- compatible = "cache";
- clocks = <&cpg_clocks R8A73A4_CLK_Z>;
- power-domains = <&pd_a3sm>;
- cache-unified;
- cache-level = <2>;
- };
-
- L2_CA7: cache-controller@1 {
- compatible = "cache";
- clocks = <&cpg_clocks R8A73A4_CLK_Z2>;
- power-domains = <&pd_a3km>;
- cache-unified;
- cache-level = <2>;
- };
-
dbsc1: memory-controller@e6790000 {
compatible = "renesas,dbsc-r8a73a4";
reg = <0 0xe6790000 0 0x10000>;
compatible = "renesas,armadillo800eva", "renesas,r8a7740";
aliases {
- serial1 = &scifa1;
+ serial0 = &scifa1;
};
chosen {
- bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
- stdout-path = &scifa1;
+ bootargs = "earlyprintk ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ stdout-path = "serial0:115200n8";
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
- reg_3p3v: regulator@0 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-boot-on;
};
- vcc_sdhi0: regulator@1 {
+ vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
enable-active-high;
};
- vccq_sdhi0: regulator@2 {
+ vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
enable-active-high;
};
- reg_5p0v: regulator@3 {
+ reg_5p0v: regulator-5p0v {
compatible = "regulator-fixed";
regulator-name = "fixed-5.0V";
regulator-min-microvolt = <5000000>;
};
};
- i2c2: i2c@2 {
+ i2c2: i2c-2 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "i2c-gpio";
function = "gether";
};
- scifa1_pins: serial1 {
+ scifa1_pins: scifa1 {
groups = "scifa1_data";
function = "scifa1";
};
<0xc2000000 0x1000>;
};
- L2: cache-controller {
+ L2: cache-controller@f0100000 {
compatible = "arm,pl310-cache";
reg = <0xf0100000 0x1000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
stdout-path = "serial0:115200n8";
};
- memory {
+ memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x10000000>;
};
- fixedregulator3v3: fixedregulator@0 {
+ fixedregulator3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
- scif0_pins: serial0 {
+ scif0_pins: scif0 {
groups = "scif0_data_a", "scif0_ctrl";
function = "scif0";
};
pinctrl-0 = <&scif0_pins>;
pinctrl-names = "default";
+ uart-has-rtscts;
status = "okay";
};
status = "disabled";
rcar_sound,src {
- src3: src@3 { };
- src4: src@4 { };
- src5: src@5 { };
- src6: src@6 { };
- src7: src@7 { };
- src8: src@8 { };
- src9: src@9 { };
+ src3: src-3 { };
+ src4: src-4 { };
+ src5: src-5 { };
+ src6: src-6 { };
+ src7: src-7 { };
+ src8: src-8 { };
+ src9: src-9 { };
};
rcar_sound,ssi {
- ssi3: ssi@3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
- ssi4: ssi@4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
- ssi5: ssi@5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi6: ssi@6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi7: ssi@7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi8: ssi@8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
- ssi9: ssi@9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi3: ssi-3 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi4: ssi-4 { interrupts = <GIC_SPI 0x85 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi5: ssi-5 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi6: ssi-6 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi7: ssi-7 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi8: ssi-8 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
+ ssi9: ssi-9 { interrupts = <GIC_SPI 0x86 IRQ_TYPE_LEVEL_HIGH>; };
};
};
chosen {
bootargs = "ignore_loglevel root=/dev/nfs ip=on";
- stdout-path = &scif2;
+ stdout-path = "serial0:115200n8";
};
- memory {
+ memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
- fixedregulator3v3: fixedregulator@0 {
+ fixedregulator3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
};
};
- scif2_pins: serial2 {
+ scif2_pins: scif2 {
groups = "scif2_data_c";
function = "scif2";
};
- scif4_pins: serial4 {
+ scif4_pins: scif4 {
groups = "scif4_data";
function = "scif4";
};
keyboard {
compatible = "gpio-keys";
- button@1 {
+ one {
linux,code = <KEY_1>;
label = "SW2-1";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
};
- button@2 {
+ two {
linux,code = <KEY_2>;
label = "SW2-2";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
};
- button@3 {
+ three {
linux,code = <KEY_3>;
label = "SW2-3";
wakeup-source;
debounce-interval = <20>;
gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
};
- button@4 {
+ four {
linux,code = <KEY_4>;
label = "SW2-4";
wakeup-source;
};
};
- fixedregulator3v3: fixedregulator@0 {
+ fixedregulator3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-always-on;
};
- vcc_sdhi0: regulator@1 {
+ vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
enable-active-high;
};
- vccq_sdhi0: regulator@2 {
+ vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
1800000 0>;
};
- vcc_sdhi2: regulator@3 {
+ vcc_sdhi2: regulator-vcc-sdhi2 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
enable-active-high;
};
- vccq_sdhi2: regulator@4 {
+ vccq_sdhi2: regulator-vccq-sdhi2 {
compatible = "regulator-gpio";
regulator-name = "SDHI2 VccQ";
* instantiate the slave device at runtime according to the documentation.
* You can then communicate with the slave via IIC3.
*/
- i2cexio: i2c@8 {
+ i2cexio: i2c-8 {
compatible = "i2c-demux-pinctrl";
i2c-parent = <&iic0>, <&i2c0>;
i2c-bus-name = "i2c-exio";
function = "du";
};
- scif0_pins: serial0 {
+ scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
};
function = "intc";
};
- scifa1_pins: serial1 {
+ scifa1_pins: scifa1 {
groups = "scifa1_data";
function = "scifa1";
};
function = "mmc1";
};
- qspi_pins: spi0 {
+ qspi_pins: qspi {
groups = "qspi_ctrl", "qspi_data4";
function = "qspi";
};
- msiof1_pins: spi2 {
+ msiof1_pins: msiof1 {
groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
"msiof1_tx";
function = "msiof1";
function = "usb2";
};
- vin1_pins: vin {
+ vin1_pins: vin1 {
groups = "vin1_data8", "vin1_clk";
function = "vin1";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
next-level-cache = <&L2_CA15>;
};
- cpu4: cpu@4 {
+ cpu4: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x100>;
next-level-cache = <&L2_CA7>;
};
- cpu5: cpu@5 {
+ cpu5: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x101>;
next-level-cache = <&L2_CA7>;
};
- cpu6: cpu@6 {
+ cpu6: cpu@102 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x102>;
next-level-cache = <&L2_CA7>;
};
- cpu7: cpu@7 {
+ cpu7: cpu@103 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x103>;
power-domains = <&sysc R8A7790_PD_CA7_CPU3>;
next-level-cache = <&L2_CA7>;
};
+
+ L2_CA15: cache-controller@0 {
+ compatible = "cache";
+ reg = <0>;
+ power-domains = <&sysc R8A7790_PD_CA15_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ L2_CA7: cache-controller@100 {
+ compatible = "cache";
+ reg = <0x100>;
+ power-domains = <&sysc R8A7790_PD_CA7_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
thermal-zones {
};
};
- L2_CA15: cache-controller@0 {
- compatible = "cache";
- power-domains = <&sysc R8A7790_PD_CA15_SCU>;
- cache-unified;
- cache-level = <2>;
+ apmu@e6151000 {
+ compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+ reg = <0 0xe6151000 0 0x188>;
+ cpus = <&cpu4 &cpu5 &cpu6 &cpu7>;
};
- L2_CA7: cache-controller@1 {
- compatible = "cache";
- power-domains = <&sysc R8A7790_PD_CA7_SCU>;
- cache-unified;
- cache-level = <2>;
+ apmu@e6152000 {
+ compatible = "renesas,r8a7790-apmu", "renesas,apmu";
+ reg = <0 0xe6152000 0 0x188>;
+ cpus = <&cpu0 &cpu1 &cpu2 &cpu3>;
};
gic: interrupt-controller@f1001000 {
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe6520000 0 0x425>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
- dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x69>, <&dmac0 0x6a>,
+ <&dmac1 0x69>, <&dmac1 0x6a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
reg = <0 0xee220000 0 0x80>;
interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
- dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
+ <&dmac1 0xe1>, <&dmac1 0xe2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
- dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
reg = <0 0xee120000 0 0x328>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
- dmas = <&dmac1 0xc9>, <&dmac1 0xca>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xc9>, <&dmac0 0xca>,
+ <&dmac1 0xc9>, <&dmac1 0xca>;
+ dma-names = "tx", "rx", "tx", "rx";
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
- dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+ <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
- dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7790_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7790_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp3_clks R8A7790_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
- dmas = <&dmac0 0x51>, <&dmac0 0x52>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
- dmas = <&dmac0 0x55>, <&dmac0 0x56>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0xe6e00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
- dmas = <&dmac0 0x41>, <&dmac0 0x42>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+ <&dmac1 0x41>, <&dmac1 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0xe6c90000 0 0x0064>;
interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
- dmas = <&dmac0 0x45>, <&dmac0 0x46>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x45>, <&dmac0 0x46>,
+ <&dmac1 0x45>, <&dmac1 0x46>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
rcar_sound,dvc {
- dvc0: dvc@0 {
+ dvc0: dvc-0 {
dmas = <&audma0 0xbc>;
dma-names = "tx";
};
- dvc1: dvc@1 {
+ dvc1: dvc-1 {
dmas = <&audma0 0xbe>;
dma-names = "tx";
};
};
rcar_sound,mix {
- mix0: mix@0 { };
- mix1: mix@1 { };
+ mix0: mix-0 { };
+ mix1: mix-1 { };
};
rcar_sound,ctu {
- ctu00: ctu@0 { };
- ctu01: ctu@1 { };
- ctu02: ctu@2 { };
- ctu03: ctu@3 { };
- ctu10: ctu@4 { };
- ctu11: ctu@5 { };
- ctu12: ctu@6 { };
- ctu13: ctu@7 { };
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
};
rcar_sound,src {
- src0: src@0 {
+ src0: src-0 {
interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x85>, <&audma1 0x9a>;
dma-names = "rx", "tx";
};
- src1: src@1 {
+ src1: src-1 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma1 0x9c>;
dma-names = "rx", "tx";
};
- src2: src@2 {
+ src2: src-2 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma1 0x9e>;
dma-names = "rx", "tx";
};
- src3: src@3 {
+ src3: src-3 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma1 0xa0>;
dma-names = "rx", "tx";
};
- src4: src@4 {
+ src4: src-4 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma1 0xb0>;
dma-names = "rx", "tx";
};
- src5: src@5 {
+ src5: src-5 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma1 0xb2>;
dma-names = "rx", "tx";
};
- src6: src@6 {
+ src6: src-6 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma1 0xb4>;
dma-names = "rx", "tx";
};
- src7: src@7 {
+ src7: src-7 {
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x93>, <&audma1 0xb6>;
dma-names = "rx", "tx";
};
- src8: src@8 {
+ src8: src-8 {
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x95>, <&audma1 0xb8>;
dma-names = "rx", "tx";
};
- src9: src@9 {
+ src9: src-9 {
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x97>, <&audma1 0xba>;
dma-names = "rx", "tx";
};
rcar_sound,ssi {
- ssi0: ssi@0 {
+ ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi1: ssi@1 {
+ ssi1: ssi-1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi2: ssi@2 {
+ ssi2: ssi-2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi3: ssi@3 {
+ ssi3: ssi-3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi4: ssi@4 {
+ ssi4: ssi-4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi5: ssi@5 {
+ ssi5: ssi-5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi6: ssi@6 {
+ ssi6: ssi-6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi7: ssi@7 {
+ ssi7: ssi-7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi8: ssi@8 {
+ ssi8: ssi-8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi9: ssi@9 {
+ ssi9: ssi-9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
};
};
- vcc_sdhi0: regulator@0 {
+ vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
enable-active-high;
};
- vccq_sdhi0: regulator@1 {
+ vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
1800000 0>;
};
- vcc_sdhi1: regulator@2 {
+ vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
enable-active-high;
};
- vccq_sdhi1: regulator@3 {
+ vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
1800000 0>;
};
- vcc_sdhi2: regulator@4 {
+ vcc_sdhi2: regulator-vcc-sdhi2 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
enable-active-high;
};
- vccq_sdhi2: regulator@5 {
+ vccq_sdhi2: regulator-vccq-sdhi2 {
compatible = "regulator-gpio";
regulator-name = "SDHI2 VccQ";
function = "du";
};
- scif0_pins: serial0 {
+ scif0_pins: scif0 {
groups = "scif0_data_d";
function = "scif0";
};
- scif1_pins: serial1 {
+ scif1_pins: scif1 {
groups = "scif1_data_d";
function = "scif1";
};
function = "sdhi2";
};
- qspi_pins: spi0 {
+ qspi_pins: qspi {
groups = "qspi_ctrl", "qspi_data4";
function = "qspi";
};
- msiof0_pins: spi1 {
+ msiof0_pins: msiof0 {
groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
"msiof0_tx";
function = "msiof0";
reg = <2 0x00000000 0 0x40000000>;
};
- vcc_sdhi0: regulator@0 {
+ vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-always-on;
};
- vccq_sdhi0: regulator@1 {
+ vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
1800000 0>;
};
- vcc_sdhi2: regulator@2 {
+ vcc_sdhi2: regulator-vcc-sdhi2 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
regulator-always-on;
};
- vccq_sdhi2: regulator@3 {
+ vccq_sdhi2: regulator-vccq-sdhi2 {
compatible = "regulator-gpio";
regulator-name = "SDHI2 VccQ";
};
&pfc {
- scif0_pins: serial0 {
+ scif0_pins: scif0 {
groups = "scif0_data_d";
function = "scif0";
};
function = "sdhi2";
};
- qspi_pins: spi0 {
+ qspi_pins: qspi {
groups = "qspi_ctrl", "qspi_data4";
function = "qspi";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
};
+
+ L2_CA15: cache-controller@0 {
+ compatible = "cache";
+ reg = <0>;
+ power-domains = <&sysc R8A7791_PD_CA15_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
thermal-zones {
};
};
- L2_CA15: cache-controller@0 {
- compatible = "cache";
- power-domains = <&sysc R8A7791_PD_CA15_SCU>;
- cache-unified;
- cache-level = <2>;
+ apmu@e6152000 {
+ compatible = "renesas,r8a7791-apmu", "renesas,apmu";
+ reg = <0 0xe6152000 0 0x188>;
+ cpus = <&cpu0 &cpu1>;
};
gic: interrupt-controller@f1001000 {
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI0>;
- dmas = <&dmac1 0xcd>, <&dmac1 0xce>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI1>;
- dmas = <&dmac1 0xc1>, <&dmac1 0xc2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+ <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_SDHI2>;
- dmas = <&dmac1 0xd3>, <&dmac1 0xd4>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA3>;
clock-names = "fck";
- dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA4>;
clock-names = "fck";
- dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7791_CLK_SCIFA5>;
clock-names = "fck";
- dmas = <&dmac0 0x23>, <&dmac0 0x24>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7791_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7791_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7791_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7791_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7791_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7791_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7791_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7791_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7791_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
reg = <0 0xe6e20000 0 0x0064>;
interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
- dmas = <&dmac0 0x51>, <&dmac0 0x52>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>,
+ <&dmac1 0x51>, <&dmac1 0x52>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0xe6e10000 0 0x0064>;
interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF1>;
- dmas = <&dmac0 0x55>, <&dmac0 0x56>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>,
+ <&dmac1 0x55>, <&dmac1 0x56>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0xe6e00000 0 0x0064>;
interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7791_CLK_MSIOF2>;
- dmas = <&dmac0 0x41>, <&dmac0 0x42>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>,
+ <&dmac1 0x41>, <&dmac1 0x42>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
rcar_sound,dvc {
- dvc0: dvc@0 {
+ dvc0: dvc-0 {
dmas = <&audma0 0xbc>;
dma-names = "tx";
};
- dvc1: dvc@1 {
+ dvc1: dvc-1 {
dmas = <&audma0 0xbe>;
dma-names = "tx";
};
};
rcar_sound,mix {
- mix0: mix@0 { };
- mix1: mix@1 { };
+ mix0: mix-0 { };
+ mix1: mix-1 { };
};
rcar_sound,ctu {
- ctu00: ctu@0 { };
- ctu01: ctu@1 { };
- ctu02: ctu@2 { };
- ctu03: ctu@3 { };
- ctu10: ctu@4 { };
- ctu11: ctu@5 { };
- ctu12: ctu@6 { };
- ctu13: ctu@7 { };
+ ctu00: ctu-0 { };
+ ctu01: ctu-1 { };
+ ctu02: ctu-2 { };
+ ctu03: ctu-3 { };
+ ctu10: ctu-4 { };
+ ctu11: ctu-5 { };
+ ctu12: ctu-6 { };
+ ctu13: ctu-7 { };
};
rcar_sound,src {
- src0: src@0 {
+ src0: src-0 {
interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x85>, <&audma1 0x9a>;
dma-names = "rx", "tx";
};
- src1: src@1 {
+ src1: src-1 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma1 0x9c>;
dma-names = "rx", "tx";
};
- src2: src@2 {
+ src2: src-2 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma1 0x9e>;
dma-names = "rx", "tx";
};
- src3: src@3 {
+ src3: src-3 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma1 0xa0>;
dma-names = "rx", "tx";
};
- src4: src@4 {
+ src4: src-4 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma1 0xb0>;
dma-names = "rx", "tx";
};
- src5: src@5 {
+ src5: src-5 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma1 0xb2>;
dma-names = "rx", "tx";
};
- src6: src@6 {
+ src6: src-6 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma1 0xb4>;
dma-names = "rx", "tx";
};
- src7: src@7 {
+ src7: src-7 {
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x93>, <&audma1 0xb6>;
dma-names = "rx", "tx";
};
- src8: src@8 {
+ src8: src-8 {
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x95>, <&audma1 0xb8>;
dma-names = "rx", "tx";
};
- src9: src@9 {
+ src9: src-9 {
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x97>, <&audma1 0xba>;
dma-names = "rx", "tx";
};
rcar_sound,ssi {
- ssi0: ssi@0 {
+ ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi1: ssi@1 {
+ ssi1: ssi-1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi2: ssi@2 {
+ ssi2: ssi-2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi3: ssi@3 {
+ ssi3: ssi-3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi4: ssi@4 {
+ ssi4: ssi-4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi5: ssi@5 {
+ ssi5: ssi-5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi6: ssi@6 {
+ ssi6: ssi-6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi7: ssi@7 {
+ ssi7: ssi-7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi8: ssi@8 {
+ ssi8: ssi-8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi9: ssi@9 {
+ ssi9: ssi-9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
--- /dev/null
+/*
+ * Device Tree Source for the Blanche board
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+#include "r8a7792.dtsi"
+
+/ {
+ model = "Blanche";
+ compatible = "renesas,blanche", "renesas,r8a7792";
+
+ aliases {
+ serial0 = &scif0;
+ serial1 = &scif3;
+ };
+
+ chosen {
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0x40000000>;
+ };
+
+ d3_3v: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "D3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ethernet@18000000 {
+ compatible = "smsc,lan89218", "smsc,lan9115";
+ reg = <0 0x18000000 0 0x100>;
+ phy-mode = "mii";
+ interrupt-parent = <&irqc>;
+ interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+ smsc,irq-push-pull;
+ reg-io-width = <4>;
+ vddvario-supply = <&d3_3v>;
+ vdd33a-supply = <&d3_3v>;
+ };
+};
+
+&extal_clk {
+ clock-frequency = <20000000>;
+};
+
+&scif0 {
+ status = "okay";
+};
+
+&scif3 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Device Tree Source for the r8a7792 SoC
+ *
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/clock/r8a7792-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/r8a7792-sysc.h>
+
+/ {
+ compatible = "renesas,r8a7792";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "renesas,apmu";
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ clock-frequency = <1000000000>;
+ clocks = <&cpg_clocks R8A7792_CLK_Z>;
+ power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
+ next-level-cache = <&L2_CA15>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ clock-frequency = <1000000000>;
+ power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
+ next-level-cache = <&L2_CA15>;
+ };
+
+ L2_CA15: cache-controller@0 {
+ compatible = "cache";
+ reg = <0>;
+ cache-unified;
+ cache-level = <2>;
+ power-domains = <&sysc R8A7792_PD_CA15_SCU>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ apmu@e6152000 {
+ compatible = "renesas,r8a7792-apmu", "renesas,apmu";
+ reg = <0 0xe6152000 0 0x188>;
+ cpus = <&cpu0 &cpu1>;
+ };
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,gic-400";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ irqc: interrupt-controller@e61c0000 {
+ compatible = "renesas,irqc-r8a7792", "renesas,irqc";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ reg = <0 0xe61c0000 0 0x200>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp4_clks R8A7792_CLK_IRQC>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ sysc: system-controller@e6180000 {
+ compatible = "renesas,r8a7792-sysc";
+ reg = <0 0xe6180000 0 0x0200>;
+ #power-domain-cells = <1>;
+ };
+
+ dmac0: dma-controller@e6700000 {
+ compatible = "renesas,dmac-r8a7792",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6700000 0 0x20000>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC0>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ dmac1: dma-controller@e6720000 {
+ compatible = "renesas,dmac-r8a7792",
+ "renesas,rcar-dmac";
+ reg = <0 0xe6720000 0 0x20000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH
+ GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14";
+ clocks = <&mstp2_clks R8A7792_CLK_SYS_DMAC1>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ #dma-cells = <1>;
+ dma-channels = <15>;
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7792",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e60000 0 64>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7792_CLK_SCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif1: serial@e6e68000 {
+ compatible = "renesas,scif-r8a7792",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e68000 0 64>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7792_CLK_SCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif2: serial@e6e58000 {
+ compatible = "renesas,scif-r8a7792",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6e58000 0 64>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7792_CLK_SCIF2>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ scif3: serial@e6ea8000 {
+ compatible = "renesas,scif-r8a7792",
+ "renesas,rcar-gen2-scif", "renesas,scif";
+ reg = <0 0xe6ea8000 0 64>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7792_CLK_SCIF3>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif0: serial@e62c0000 {
+ compatible = "renesas,hscif-r8a7792",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c0000 0 96>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7792_CLK_HSCIF0>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ hscif1: serial@e62c8000 {
+ compatible = "renesas,hscif-r8a7792",
+ "renesas,rcar-gen2-hscif", "renesas,hscif";
+ reg = <0 0xe62c8000 0 96>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7792_CLK_HSCIF1>, <&zs_clk>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ jpu: jpeg-codec@fe980000 {
+ compatible = "renesas,jpu-r8a7792",
+ "renesas,rcar-gen2-jpu";
+ reg = <0 0xfe980000 0 0x10300>;
+ interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7792_CLK_JPU>;
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ };
+
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a7792-cpg-clocks",
+ "renesas,rcar-gen2-cpg-clocks";
+ reg = <0 0xe6150000 0 0x1000>;
+ clocks = <&extal_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll3",
+ "lb", "qspi", "z", "adsp";
+ #power-domain-cells = <0>;
+ };
+
+ /* Fixed factor clocks */
+ zs_clk: zs {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <6>;
+ clock-mult = <1>;
+ };
+ p_clk: p {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <24>;
+ clock-mult = <1>;
+ };
+ cp_clk: cp {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <48>;
+ clock-mult = <1>;
+ };
+ m2_clk: m2 {
+ compatible = "fixed-factor-clock";
+ clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
+ #clock-cells = <0>;
+ clock-div = <8>;
+ clock-mult = <1>;
+ };
+
+ /* Gate clocks */
+ mstp1_clks: mstp1_clks@e6150134 {
+ compatible = "renesas,r8a7792-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
+ clocks = <&m2_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7792_CLK_JPU>;
+ clock-output-names = "jpu";
+ };
+ mstp2_clks: mstp2_clks@e6150138 {
+ compatible = "renesas,r8a7792-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
+ clocks = <&zs_clk>, <&zs_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7792_CLK_SYS_DMAC1 R8A7792_CLK_SYS_DMAC0
+ >;
+ clock-output-names = "sys-dmac1", "sys-dmac0";
+ };
+ mstp4_clks: mstp4_clks@e6150140 {
+ compatible = "renesas,r8a7792-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe6150140 0 4>, <0 0xe615004c 0 4>;
+ clocks = <&cp_clk>;
+ #clock-cells = <1>;
+ clock-indices = <R8A7792_CLK_IRQC>;
+ clock-output-names = "irqc";
+ };
+ mstp7_clks: mstp7_clks@e615014c {
+ compatible = "renesas,r8a7792-mstp-clocks",
+ "renesas,cpg-mstp-clocks";
+ reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
+ clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>,
+ <&p_clk>, <&p_clk>;
+ #clock-cells = <1>;
+ clock-indices = <
+ R8A7792_CLK_HSCIF1 R8A7792_CLK_HSCIF0
+ R8A7792_CLK_SCIF3 R8A7792_CLK_SCIF2
+ R8A7792_CLK_SCIF1 R8A7792_CLK_SCIF0
+ >;
+ clock-output-names = "hscif1", "hscif0", "scif3",
+ "scif2", "scif1", "scif0";
+ };
+ };
+
+ /* External root clock */
+ extal_clk: extal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+
+ /* External SCIF clock */
+ scif_clk: scif {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ /* This value must be overridden by the board. */
+ clock-frequency = <0>;
+ };
+};
};
};
- vcc_sdhi0: regulator@0 {
+ vcc_sdhi0: regulator-vcc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
enable-active-high;
};
- vccq_sdhi0: regulator@1 {
+ vccq_sdhi0: regulator-vccq-sdhi0 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
1800000 0>;
};
- vcc_sdhi1: regulator@2 {
+ vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
enable-active-high;
};
- vccq_sdhi1: regulator@3 {
+ vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
1800000 0>;
};
- vcc_sdhi2: regulator@4 {
+ vcc_sdhi2: regulator-vcc-sdhi2 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
enable-active-high;
};
- vccq_sdhi2: regulator@5 {
+ vccq_sdhi2: regulator-vccq-sdhi2 {
compatible = "regulator-gpio";
regulator-name = "SDHI2 VccQ";
function = "du";
};
- scif0_pins: serial0 {
+ scif0_pins: scif0 {
groups = "scif0_data_d";
function = "scif0";
};
- scif1_pins: serial1 {
+ scif1_pins: scif1 {
groups = "scif1_data_d";
function = "scif1";
};
renesas,function = "sdhi2";
};
- qspi_pins: spi0 {
+ qspi_pins: qspi {
groups = "qspi_ctrl", "qspi_data4";
function = "qspi";
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "renesas,apmu";
cpu0: cpu@0 {
device_type = "cpu";
< 375000 1000000>;
next-level-cache = <&L2_CA15>;
};
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ clock-frequency = <1500000000>;
+ power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+ };
+
+ L2_CA15: cache-controller@0 {
+ compatible = "cache";
+ reg = <0>;
+ power-domains = <&sysc R8A7793_PD_CA15_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
+ };
+
+ apmu@e6152000 {
+ compatible = "renesas,r8a7793-apmu", "renesas,apmu";
+ reg = <0 0xe6152000 0 0x188>;
+ cpus = <&cpu0 &cpu1>;
};
thermal-zones {
};
};
- L2_CA15: cache-controller@0 {
- compatible = "cache";
- power-domains = <&sysc R8A7793_PD_CA15_SCU>;
- cache-unified;
- cache-level = <2>;
- };
-
gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
reg = <0 0xe60b0000 0 0x425>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_IICDVFS>;
- dmas = <&dmac0 0x77>, <&dmac0 0x78>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xee100000 0 0x328>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_SDHI0>;
- dmas = <&dmac0 0xcd>, <&dmac0 0xce>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_SDHI1>;
- dmas = <&dmac0 0xc1>, <&dmac0 0xc2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+ <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7793_CLK_SDHI2>;
- dmas = <&dmac0 0xd3>, <&dmac0 0xd4>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ status = "disabled";
+ };
+
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7793", "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7793_CLK_MMCIF0>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ reg-io-width = <4>;
status = "disabled";
+ max-frequency = <97500000>;
};
scifa0: serial@e6c40000 {
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA3>;
clock-names = "fck";
- dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA4>;
clock-names = "fck";
- dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7793_CLK_SCIFA5>;
clock-names = "fck";
- dmas = <&dmac0 0x23>, <&dmac0 0x24>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7793_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7793_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7793_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7793_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7793_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7793_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7793_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7793_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7793_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7793_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7793_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
status = "disabled";
rcar_sound,dvc {
- dvc0: dvc@0 {
+ dvc0: dvc-0 {
dmas = <&audma0 0xbc>;
dma-names = "tx";
};
- dvc1: dvc@1 {
+ dvc1: dvc-1 {
dmas = <&audma0 0xbe>;
dma-names = "tx";
};
};
rcar_sound,src {
- src0: src@0 {
+ src0: src-0 {
interrupts = <GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x85>, <&audma1 0x9a>;
dma-names = "rx", "tx";
};
- src1: src@1 {
+ src1: src-1 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x87>, <&audma1 0x9c>;
dma-names = "rx", "tx";
};
- src2: src@2 {
+ src2: src-2 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x89>, <&audma1 0x9e>;
dma-names = "rx", "tx";
};
- src3: src@3 {
+ src3: src-3 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8b>, <&audma1 0xa0>;
dma-names = "rx", "tx";
};
- src4: src@4 {
+ src4: src-4 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8d>, <&audma1 0xb0>;
dma-names = "rx", "tx";
};
- src5: src@5 {
+ src5: src-5 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x8f>, <&audma1 0xb2>;
dma-names = "rx", "tx";
};
- src6: src@6 {
+ src6: src-6 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x91>, <&audma1 0xb4>;
dma-names = "rx", "tx";
};
- src7: src@7 {
+ src7: src-7 {
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x93>, <&audma1 0xb6>;
dma-names = "rx", "tx";
};
- src8: src@8 {
+ src8: src-8 {
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x95>, <&audma1 0xb8>;
dma-names = "rx", "tx";
};
- src9: src@9 {
+ src9: src-9 {
interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x97>, <&audma1 0xba>;
dma-names = "rx", "tx";
};
rcar_sound,ssi {
- ssi0: ssi@0 {
+ ssi0: ssi-0 {
interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi1: ssi@1 {
+ ssi1: ssi-1 {
interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi2: ssi@2 {
+ ssi2: ssi-2 {
interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi3: ssi@3 {
+ ssi3: ssi-3 {
interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi4: ssi@4 {
+ ssi4: ssi-4 {
interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi5: ssi@5 {
+ ssi5: ssi-5 {
interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi6: ssi@6 {
+ ssi6: ssi-6 {
interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi7: ssi@7 {
+ ssi7: ssi-7 {
interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi8: ssi@8 {
+ ssi8: ssi-8 {
interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
dma-names = "rx", "tx", "rxu", "txu";
};
- ssi9: ssi@9 {
+ ssi9: ssi-9 {
interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
dma-names = "rx", "tx", "rxu", "txu";
function = "du";
};
- scif2_pins: serial2 {
+ scif2_pins: scif2 {
groups = "scif2_data";
function = "scif2";
};
};
&pfc {
- qspi_pins: spi0 {
+ qspi_pins: qspi {
groups = "qspi_ctrl", "qspi_data4";
function = "qspi";
};
reg = <0 0x40000000 0 0x40000000>;
};
- d3_3v: regulator@0 {
+ d3_3v: regulator-d3-3v {
compatible = "regulator-fixed";
regulator-name = "D3.3V";
regulator-min-microvolt = <3300000>;
regulator-always-on;
};
- vcc_sdhi1: regulator@3 {
+ vcc_sdhi1: regulator-vcc-sdhi1 {
compatible = "regulator-fixed";
regulator-name = "SDHI1 Vcc";
enable-active-high;
};
- vccq_sdhi1: regulator@4 {
+ vccq_sdhi1: regulator-vccq-sdhi1 {
compatible = "regulator-gpio";
regulator-name = "SDHI1 VccQ";
pinctrl-0 = <&scif_clk_pins>;
pinctrl-names = "default";
- scif2_pins: serial2 {
+ scif2_pins: scif2 {
groups = "scif2_data";
function = "scif2";
};
function = "sdhi1";
};
- qspi_pins: spi0 {
+ qspi_pins: qspi {
groups = "qspi_ctrl", "qspi_data4";
function = "qspi";
};
groups = "usb1";
function = "usb1";
};
+
+ du0_pins: du0 {
+ groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out";
+ function = "du0";
+ };
+
+ du1_pins: du1 {
+ groups = "du1_rgb666", "du1_sync", "du1_disp", "du1_clk0_out";
+ function = "du1";
+ };
};
&scif2 {
};
&du {
+ pinctrl-0 = <&du0_pins &du1_pins>;
+ pinctrl-names = "default";
status = "okay";
clocks = <&mstp7_clks R8A7794_CLK_DU0>,
power-domains = <&sysc R8A7794_PD_CA7_CPU1>;
next-level-cache = <&L2_CA7>;
};
- };
- L2_CA7: cache-controller@1 {
- compatible = "cache";
- power-domains = <&sysc R8A7794_PD_CA7_SCU>;
- cache-unified;
- cache-level = <2>;
+ L2_CA7: cache-controller@0 {
+ compatible = "cache";
+ reg = <0>;
+ power-domains = <&sysc R8A7794_PD_CA7_SCU>;
+ cache-unified;
+ cache-level = <2>;
+ };
};
gic: interrupt-controller@f1001000 {
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA0>;
clock-names = "fck";
- dmas = <&dmac0 0x21>, <&dmac0 0x22>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+ <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA1>;
clock-names = "fck";
- dmas = <&dmac0 0x25>, <&dmac0 0x26>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+ <&dmac1 0x25>, <&dmac1 0x26>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFA2>;
clock-names = "fck";
- dmas = <&dmac0 0x27>, <&dmac0 0x28>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+ <&dmac1 0x27>, <&dmac1 0x28>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA3>;
clock-names = "fck";
- dmas = <&dmac0 0x1b>, <&dmac0 0x1c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1b>, <&dmac0 0x1c>,
+ <&dmac1 0x1b>, <&dmac1 0x1c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA4>;
clock-names = "fck";
- dmas = <&dmac0 0x1f>, <&dmac0 0x20>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1f>, <&dmac0 0x20>,
+ <&dmac1 0x1f>, <&dmac1 0x20>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp11_clks R8A7794_CLK_SCIFA5>;
clock-names = "fck";
- dmas = <&dmac0 0x23>, <&dmac0 0x24>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x23>, <&dmac0 0x24>,
+ <&dmac1 0x23>, <&dmac1 0x24>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB0>;
clock-names = "fck";
- dmas = <&dmac0 0x3d>, <&dmac0 0x3e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+ <&dmac1 0x3d>, <&dmac1 0x3e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB1>;
clock-names = "fck";
- dmas = <&dmac0 0x19>, <&dmac0 0x1a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+ <&dmac1 0x19>, <&dmac1 0x1a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7794_CLK_SCIFB2>;
clock-names = "fck";
- dmas = <&dmac0 0x1d>, <&dmac0 0x1e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+ <&dmac1 0x1d>, <&dmac1 0x1e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7794_CLK_SCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x29>, <&dmac0 0x2a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+ <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7794_CLK_SCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2d>, <&dmac0 0x2e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+ <&dmac1 0x2d>, <&dmac1 0x2e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7794_CLK_SCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2b>, <&dmac0 0x2c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+ <&dmac1 0x2b>, <&dmac1 0x2c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7794_CLK_SCIF3>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x2f>, <&dmac0 0x30>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x2f>, <&dmac0 0x30>,
+ <&dmac1 0x2f>, <&dmac1 0x30>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7794_CLK_SCIF4>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfb>, <&dmac0 0xfc>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfb>, <&dmac0 0xfc>,
+ <&dmac1 0xfb>, <&dmac1 0xfc>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7794_CLK_SCIF5>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0xfd>, <&dmac0 0xfe>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xfd>, <&dmac0 0xfe>,
+ <&dmac1 0xfd>, <&dmac1 0xfe>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7794_CLK_HSCIF0>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x39>, <&dmac0 0x3a>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+ <&dmac1 0x39>, <&dmac1 0x3a>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7794_CLK_HSCIF1>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x4d>, <&dmac0 0x4e>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+ <&dmac1 0x4d>, <&dmac1 0x4e>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
clocks = <&mstp7_clks R8A7794_CLK_HSCIF2>, <&zs_clk>,
<&scif_clk>;
clock-names = "fck", "brg_int", "scif_clk";
- dmas = <&dmac0 0x3b>, <&dmac0 0x3c>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x3b>, <&dmac0 0x3c>,
+ <&dmac1 0x3b>, <&dmac1 0x3c>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe6500000 0 0x425>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_IIC0>;
- dmas = <&dmac0 0x61>, <&dmac0 0x62>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>,
+ <&dmac1 0x61>, <&dmac1 0x62>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0xe6510000 0 0x425>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_IIC1>;
- dmas = <&dmac0 0x65>, <&dmac0 0x66>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>,
+ <&dmac1 0x65>, <&dmac1 0x66>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0xee200000 0 0x80>;
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_MMCIF0>;
- dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>,
+ <&dmac1 0xd1>, <&dmac1 0xd2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
reg-io-width = <4>;
status = "disabled";
reg = <0 0xee100000 0 0x200>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI0>;
+ dmas = <&dmac0 0xcd>, <&dmac0 0xce>,
+ <&dmac1 0xcd>, <&dmac1 0xce>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xee140000 0 0x100>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI1>;
+ dmas = <&dmac0 0xc1>, <&dmac0 0xc2>,
+ <&dmac1 0xc1>, <&dmac1 0xc2>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xee160000 0 0x100>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7794_CLK_SDHI2>;
+ dmas = <&dmac0 0xd3>, <&dmac0 0xd4>,
+ <&dmac1 0xd3>, <&dmac1 0xd4>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
status = "disabled";
};
reg = <0 0xe6b10000 0 0x2c>;
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>;
- dmas = <&dmac0 0x17>, <&dmac0 0x18>;
- dma-names = "tx", "rx";
+ dmas = <&dmac0 0x17>, <&dmac0 0x18>,
+ <&dmac1 0x17>, <&dmac1 0x18>;
+ dma-names = "tx", "rx", "tx", "rx";
power-domains = <&sysc R8A7794_PD_ALWAYS_ON>;
num-cs = <1>;
#address-cells = <1>;
/dts-v1/;
-#include "rk3228.dtsi"
+#include "rk322x.dtsi"
/ {
model = "Rockchip RK3228 Evaluation board";
+++ /dev/null
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This file is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/clock/rk3228-cru.h>
-#include <dt-bindings/thermal/thermal.h>
-#include "skeleton.dtsi"
-
-/ {
- compatible = "rockchip,rk3228";
-
- interrupt-parent = <&gic>;
-
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@f00 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0xf00>;
- resets = <&cru SRST_CORE0>;
- operating-points = <
- /* KHz uV */
- 816000 1000000
- >;
- #cooling-cells = <2>; /* min followed by max */
- clock-latency = <40000>;
- clocks = <&cru ARMCLK>;
- };
-
- cpu1: cpu@f01 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0xf01>;
- resets = <&cru SRST_CORE1>;
- };
-
- cpu2: cpu@f02 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0xf02>;
- resets = <&cru SRST_CORE2>;
- };
-
- cpu3: cpu@f03 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0xf03>;
- resets = <&cru SRST_CORE3>;
- };
- };
-
- amba {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- pdma: pdma@110f0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x110f0000 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- #dma-cells = <1>;
- clocks = <&cru ACLK_DMAC>;
- clock-names = "apb_pclk";
- };
- };
-
- arm-pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
- };
-
- timer {
- compatible = "arm,armv7-timer";
- arm,cpu-registers-not-fw-configured;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- clock-frequency = <24000000>;
- };
-
- xin24m: oscillator {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xin24m";
- #clock-cells = <0>;
- };
-
- grf: syscon@11000000 {
- compatible = "syscon";
- reg = <0x11000000 0x1000>;
- };
-
- uart0: serial@11010000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x11010000 0x100>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <24000000>;
- clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
- clock-names = "baudclk", "apb_pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uart1: serial@11020000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x11020000 0x100>;
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <24000000>;
- clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
- clock-names = "baudclk", "apb_pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_xfer>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- uart2: serial@11030000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x11030000 0x100>;
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <24000000>;
- clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
- clock-names = "baudclk", "apb_pclk";
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_xfer>;
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- i2c0: i2c@11050000 {
- compatible = "rockchip,rk3228-i2c";
- reg = <0x11050000 0x1000>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "i2c";
- clocks = <&cru PCLK_I2C0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_xfer>;
- status = "disabled";
- };
-
- i2c1: i2c@11060000 {
- compatible = "rockchip,rk3228-i2c";
- reg = <0x11060000 0x1000>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "i2c";
- clocks = <&cru PCLK_I2C1>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_xfer>;
- status = "disabled";
- };
-
- i2c2: i2c@11070000 {
- compatible = "rockchip,rk3228-i2c";
- reg = <0x11070000 0x1000>;
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "i2c";
- clocks = <&cru PCLK_I2C2>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_xfer>;
- status = "disabled";
- };
-
- i2c3: i2c@11080000 {
- compatible = "rockchip,rk3228-i2c";
- reg = <0x11080000 0x1000>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
- clock-names = "i2c";
- clocks = <&cru PCLK_I2C3>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_xfer>;
- status = "disabled";
- };
-
- pwm0: pwm@110b0000 {
- compatible = "rockchip,rk3288-pwm";
- reg = <0x110b0000 0x10>;
- #pwm-cells = <3>;
- clocks = <&cru PCLK_PWM>;
- clock-names = "pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- status = "disabled";
- };
-
- pwm1: pwm@110b0010 {
- compatible = "rockchip,rk3288-pwm";
- reg = <0x110b0010 0x10>;
- #pwm-cells = <3>;
- clocks = <&cru PCLK_PWM>;
- clock-names = "pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm1_pin>;
- status = "disabled";
- };
-
- pwm2: pwm@110b0020 {
- compatible = "rockchip,rk3288-pwm";
- reg = <0x110b0020 0x10>;
- #pwm-cells = <3>;
- clocks = <&cru PCLK_PWM>;
- clock-names = "pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm2_pin>;
- status = "disabled";
- };
-
- pwm3: pwm@110b0030 {
- compatible = "rockchip,rk3288-pwm";
- reg = <0x110b0030 0x10>;
- #pwm-cells = <2>;
- clocks = <&cru PCLK_PWM>;
- clock-names = "pwm";
- pinctrl-names = "default";
- pinctrl-0 = <&pwm3_pin>;
- status = "disabled";
- };
-
- timer: timer@110c0000 {
- compatible = "rockchip,rk3288-timer";
- reg = <0x110c0000 0x20>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&xin24m>, <&cru PCLK_TIMER>;
- clock-names = "timer", "pclk";
- };
-
- cru: clock-controller@110e0000 {
- compatible = "rockchip,rk3228-cru";
- reg = <0x110e0000 0x1000>;
- rockchip,grf = <&grf>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- assigned-clocks = <&cru PLL_GPLL>;
- assigned-clock-rates = <594000000>;
- };
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <100>; /* milliseconds */
- polling-delay = <5000>; /* milliseconds */
-
- thermal-sensors = <&tsadc 0>;
-
- trips {
- cpu_alert0: cpu_alert0 {
- temperature = <70000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_alert1: cpu_alert1 {
- temperature = <75000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
- cpu_crit: cpu_crit {
- temperature = <90000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT 6>;
- };
- map1 {
- trip = <&cpu_alert1>;
- cooling-device =
- <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
- tsadc: tsadc@11150000 {
- compatible = "rockchip,rk3228-tsadc";
- reg = <0x11150000 0x100>;
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
- clock-names = "tsadc", "apb_pclk";
- resets = <&cru SRST_TSADC>;
- reset-names = "tsadc-apb";
- pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&otp_gpio>;
- pinctrl-1 = <&otp_out>;
- pinctrl-2 = <&otp_gpio>;
- #thermal-sensor-cells = <0>;
- rockchip,hw-tshut-temp = <95000>;
- status = "disabled";
- };
-
- emmc: dwmmc@30020000 {
- compatible = "rockchip,rk3288-dw-mshc";
- reg = <0x30020000 0x4000>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <37500000>;
- clock-freq-min-max = <400000 37500000>;
- clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
- <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
- bus-width = <8>;
- default-sample-phase = <158>;
- num-slots = <1>;
- fifo-depth = <0x100>;
- pinctrl-names = "default";
- pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
- status = "disabled";
- };
-
- gic: interrupt-controller@32010000 {
- compatible = "arm,gic-400";
- interrupt-controller;
- #interrupt-cells = <3>;
- #address-cells = <0>;
-
- reg = <0x32011000 0x1000>,
- <0x32012000 0x1000>,
- <0x32014000 0x2000>,
- <0x32016000 0x2000>;
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- pinctrl: pinctrl {
- compatible = "rockchip,rk3228-pinctrl";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- gpio0: gpio0@11110000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x11110000 0x100>;
- interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO0>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio1: gpio1@11120000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x11120000 0x100>;
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO1>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio2: gpio2@11130000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x11130000 0x100>;
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO2>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gpio3: gpio3@11140000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x11140000 0x100>;
- interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru PCLK_GPIO3>;
-
- gpio-controller;
- #gpio-cells = <2>;
-
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- pcfg_pull_up: pcfg-pull-up {
- bias-pull-up;
- };
-
- pcfg_pull_down: pcfg-pull-down {
- bias-pull-down;
- };
-
- pcfg_pull_none: pcfg-pull-none {
- bias-disable;
- };
-
- emmc {
- emmc_clk: emmc-clk {
- rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
- };
-
- emmc_cmd: emmc-cmd {
- rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>;
- };
-
- emmc_bus8: emmc-bus8 {
- rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
- <1 25 RK_FUNC_2 &pcfg_pull_none>,
- <1 26 RK_FUNC_2 &pcfg_pull_none>,
- <1 27 RK_FUNC_2 &pcfg_pull_none>,
- <1 28 RK_FUNC_2 &pcfg_pull_none>,
- <1 29 RK_FUNC_2 &pcfg_pull_none>,
- <1 30 RK_FUNC_2 &pcfg_pull_none>,
- <1 31 RK_FUNC_2 &pcfg_pull_none>;
- };
- };
-
- i2c0 {
- i2c0_xfer: i2c0-xfer {
- rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
- <0 1 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
- i2c1 {
- i2c1_xfer: i2c1-xfer {
- rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
- <0 3 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
- i2c2 {
- i2c2_xfer: i2c2-xfer {
- rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
- <2 21 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
- i2c3 {
- i2c3_xfer: i2c3-xfer {
- rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
- <0 7 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
- pwm0 {
- pwm0_pin: pwm0-pin {
- rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
- pwm1 {
- pwm1_pin: pwm1-pin {
- rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>;
- };
- };
-
- pwm2 {
- pwm2_pin: pwm2-pin {
- rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>;
- };
- };
-
- pwm3 {
- pwm3_pin: pwm3-pin {
- rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>;
- };
- };
-
- tsadc {
- otp_gpio: otp-gpio {
- rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- otp_out: otp-out {
- rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>;
- };
- };
-
- uart0 {
- uart0_xfer: uart0-xfer {
- rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,
- <2 27 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart0_cts: uart0-cts {
- rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart0_rts: uart0-rts {
- rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
- uart1 {
- uart1_xfer: uart1-xfer {
- rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>,
- <1 10 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart1_cts: uart1-cts {
- rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart1_rts: uart1-rts {
- rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
-
- uart2 {
- uart2_xfer: uart2-xfer {
- rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
- <1 19 RK_FUNC_2 &pcfg_pull_none>;
- };
-
- uart2_cts: uart2-cts {
- rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>;
- };
-
- uart2_rts: uart2-rts {
- rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>;
- };
- };
- };
-};
--- /dev/null
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk322x.dtsi"
+
+/ {
+ model = "Rockchip RK3229 Evaluation board";
+ compatible = "rockchip,rk3229-evb", "rockchip,rk3229";
+
+ memory {
+ device_type = "memory";
+ reg = <0x60000000 0x40000000>;
+ };
+
+ ext_gmac: ext_gmac {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ #clock-cells = <0>;
+ };
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ regulator-name = "vcc_phy";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3228-cru.h>
+#include <dt-bindings/thermal/thermal.h>
+#include "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf00>;
+ resets = <&cru SRST_CORE0>;
+ operating-points = <
+ /* KHz uV */
+ 816000 1000000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
+ };
+
+ cpu1: cpu@f01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf01>;
+ resets = <&cru SRST_CORE1>;
+ };
+
+ cpu2: cpu@f02 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf02>;
+ resets = <&cru SRST_CORE2>;
+ };
+
+ cpu3: cpu@f03 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf03>;
+ resets = <&cru SRST_CORE3>;
+ };
+ };
+
+ amba {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@110f0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x110f0000 0x4000>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ clocks = <&cru ACLK_DMAC>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <24000000>;
+ };
+
+ xin24m: oscillator {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xin24m";
+ #clock-cells = <0>;
+ };
+
+ i2s1: i2s1@100b0000 {
+ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+ reg = <0x100b0000 0x4000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S1_8CH>;
+ dmas = <&pdma 14>, <&pdma 15>;
+ dma-names = "tx", "rx";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_bus>;
+ status = "disabled";
+ };
+
+ i2s0: i2s0@100c0000 {
+ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+ reg = <0x100c0000 0x4000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S0_8CH>;
+ dmas = <&pdma 11>, <&pdma 12>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ i2s2: i2s2@100e0000 {
+ compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
+ reg = <0x100e0000 0x4000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2s_clk", "i2s_hclk";
+ clocks = <&cru SCLK_I2S2>, <&cru HCLK_I2S2_2CH>;
+ dmas = <&pdma 0>, <&pdma 1>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ grf: syscon@11000000 {
+ compatible = "syscon";
+ reg = <0x11000000 0x1000>;
+ };
+
+ uart0: serial@11010000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x11010000 0x100>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@11020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x11020000 0x100>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@11030000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x11030000 0x100>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+ clock-names = "baudclk", "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_xfer>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@11050000 {
+ compatible = "rockchip,rk3228-i2c";
+ reg = <0x11050000 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_xfer>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11060000 {
+ compatible = "rockchip,rk3228-i2c";
+ reg = <0x11060000 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_xfer>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11070000 {
+ compatible = "rockchip,rk3228-i2c";
+ reg = <0x11070000 0x1000>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_xfer>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@11080000 {
+ compatible = "rockchip,rk3228-i2c";
+ reg = <0x11080000 0x1000>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clock-names = "i2c";
+ clocks = <&cru PCLK_I2C3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_xfer>;
+ status = "disabled";
+ };
+
+ pwm0: pwm@110b0000 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0000 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@110b0010 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0010 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm1_pin>;
+ status = "disabled";
+ };
+
+ pwm2: pwm@110b0020 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0020 0x10>;
+ #pwm-cells = <3>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm2_pin>;
+ status = "disabled";
+ };
+
+ pwm3: pwm@110b0030 {
+ compatible = "rockchip,rk3288-pwm";
+ reg = <0x110b0030 0x10>;
+ #pwm-cells = <2>;
+ clocks = <&cru PCLK_PWM>;
+ clock-names = "pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pin>;
+ status = "disabled";
+ };
+
+ timer: timer@110c0000 {
+ compatible = "rockchip,rk3288-timer";
+ reg = <0x110c0000 0x20>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>, <&cru PCLK_TIMER>;
+ clock-names = "timer", "pclk";
+ };
+
+ cru: clock-controller@110e0000 {
+ compatible = "rockchip,rk3228-cru";
+ reg = <0x110e0000 0x1000>;
+ rockchip,grf = <&grf>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ assigned-clocks = <&cru PLL_GPLL>;
+ assigned-clock-rates = <594000000>;
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <100>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&tsadc 0>;
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_alert1: cpu_alert1 {
+ temperature = <75000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT 6>;
+ };
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
+ tsadc: tsadc@11150000 {
+ compatible = "rockchip,rk3228-tsadc";
+ reg = <0x11150000 0x100>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&otp_gpio>;
+ pinctrl-1 = <&otp_out>;
+ pinctrl-2 = <&otp_gpio>;
+ #thermal-sensor-cells = <0>;
+ rockchip,hw-tshut-temp = <95000>;
+ status = "disabled";
+ };
+
+ emmc: dwmmc@30020000 {
+ compatible = "rockchip,rk3288-dw-mshc";
+ reg = <0x30020000 0x4000>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <37500000>;
+ clock-freq-min-max = <400000 37500000>;
+ clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
+ <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
+ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+ bus-width = <8>;
+ default-sample-phase = <158>;
+ num-slots = <1>;
+ fifo-depth = <0x100>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+ status = "disabled";
+ };
+
+ gmac: ethernet@30200000 {
+ compatible = "rockchip,rk3228-gmac";
+ reg = <0x30200000 0x10000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
+ <&cru SCLK_MAC_TX>, <&cru SCLK_MAC_REF>,
+ <&cru SCLK_MAC_REFOUT>, <&cru ACLK_GMAC>,
+ <&cru PCLK_GMAC>;
+ clock-names = "stmmaceth", "mac_clk_rx",
+ "mac_clk_tx", "clk_mac_ref",
+ "clk_mac_refout", "aclk_mac",
+ "pclk_mac";
+ resets = <&cru SRST_GMAC>;
+ reset-names = "stmmaceth";
+ rockchip,grf = <&grf>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@32010000 {
+ compatible = "arm,gic-400";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+
+ reg = <0x32011000 0x1000>,
+ <0x32012000 0x1000>,
+ <0x32014000 0x2000>,
+ <0x32016000 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3228-pinctrl";
+ rockchip,grf = <&grf>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ gpio0: gpio0@11110000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11110000 0x100>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio1: gpio1@11120000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11120000 0x100>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO1>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio2: gpio2@11130000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11130000 0x100>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio3: gpio3@11140000 {
+ compatible = "rockchip,gpio-bank";
+ reg = <0x11140000 0x100>;
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_GPIO3>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ pcfg_pull_up: pcfg-pull-up {
+ bias-pull-up;
+ };
+
+ pcfg_pull_down: pcfg-pull-down {
+ bias-pull-down;
+ };
+
+ pcfg_pull_none: pcfg-pull-none {
+ bias-disable;
+ };
+
+ pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
+ drive-strength = <12>;
+ };
+
+ emmc {
+ emmc_clk: emmc-clk {
+ rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_cmd: emmc-cmd {
+ rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ emmc_bus8: emmc-bus8 {
+ rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
+ <1 25 RK_FUNC_2 &pcfg_pull_none>,
+ <1 26 RK_FUNC_2 &pcfg_pull_none>,
+ <1 27 RK_FUNC_2 &pcfg_pull_none>,
+ <1 28 RK_FUNC_2 &pcfg_pull_none>,
+ <1 29 RK_FUNC_2 &pcfg_pull_none>,
+ <1 30 RK_FUNC_2 &pcfg_pull_none>,
+ <1 31 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ rgmii_pins: rgmii-pins {
+ rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>,
+ <2 12 RK_FUNC_1 &pcfg_pull_none>,
+ <2 25 RK_FUNC_1 &pcfg_pull_none>,
+ <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <2 22 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <2 23 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <2 9 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <2 17 RK_FUNC_1 &pcfg_pull_none>,
+ <2 16 RK_FUNC_1 &pcfg_pull_none>,
+ <2 21 RK_FUNC_2 &pcfg_pull_none>,
+ <2 20 RK_FUNC_2 &pcfg_pull_none>,
+ <2 11 RK_FUNC_1 &pcfg_pull_none>,
+ <2 8 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ rmii_pins: rmii-pins {
+ rockchip,pins = <2 14 RK_FUNC_1 &pcfg_pull_none>,
+ <2 12 RK_FUNC_1 &pcfg_pull_none>,
+ <2 25 RK_FUNC_1 &pcfg_pull_none>,
+ <2 19 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <2 18 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <2 13 RK_FUNC_1 &pcfg_pull_none_drv_12ma>,
+ <2 17 RK_FUNC_1 &pcfg_pull_none>,
+ <2 16 RK_FUNC_1 &pcfg_pull_none>,
+ <2 8 RK_FUNC_1 &pcfg_pull_none>,
+ <2 15 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ phy_pins: phy-pins {
+ rockchip,pins = <2 14 RK_FUNC_2 &pcfg_pull_none>,
+ <2 8 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ i2c0 {
+ i2c0_xfer: i2c0-xfer {
+ rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
+ <0 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c1 {
+ i2c1_xfer: i2c1-xfer {
+ rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+ <0 3 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c2 {
+ i2c2_xfer: i2c2-xfer {
+ rockchip,pins = <2 20 RK_FUNC_1 &pcfg_pull_none>,
+ <2 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2c3 {
+ i2c3_xfer: i2c3-xfer {
+ rockchip,pins = <0 6 RK_FUNC_1 &pcfg_pull_none>,
+ <0 7 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ i2s1 {
+ i2s1_bus: i2s1-bus {
+ rockchip,pins = <0 8 RK_FUNC_1 &pcfg_pull_none>,
+ <0 9 RK_FUNC_1 &pcfg_pull_none>,
+ <0 11 RK_FUNC_1 &pcfg_pull_none>,
+ <0 12 RK_FUNC_1 &pcfg_pull_none>,
+ <0 13 RK_FUNC_1 &pcfg_pull_none>,
+ <0 14 RK_FUNC_1 &pcfg_pull_none>,
+ <1 2 RK_FUNC_1 &pcfg_pull_none>,
+ <1 4 RK_FUNC_1 &pcfg_pull_none>,
+ <1 5 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm0 {
+ pwm0_pin: pwm0-pin {
+ rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ pwm1 {
+ pwm1_pin: pwm1-pin {
+ rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm2 {
+ pwm2_pin: pwm2-pin {
+ rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ pwm3 {
+ pwm3_pin: pwm3-pin {
+ rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ tsadc {
+ otp_gpio: otp-gpio {
+ rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ otp_out: otp-out {
+ rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>;
+ };
+ };
+
+ uart0 {
+ uart0_xfer: uart0-xfer {
+ rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,
+ <2 27 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_cts: uart0-cts {
+ rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart0_rts: uart0-rts {
+ rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart1 {
+ uart1_xfer: uart1-xfer {
+ rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>,
+ <1 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_cts: uart1-cts {
+ rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart1_rts: uart1-rts {
+ rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
+ uart2 {
+ uart2_xfer: uart2-xfer {
+ rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+ <1 19 RK_FUNC_2 &pcfg_pull_none>;
+ };
+
+ uart2_cts: uart2-cts {
+ rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ uart2_rts: uart2-rts {
+ rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+ };
+};
clock-output-names = "ext_gmac";
};
- io_domains: io-domains {
- compatible = "rockchip,rk3288-io-voltage-domain";
- rockchip,grf = <&grf>;
-
- audio-supply = <&vcca_33>;
- bb-supply = <&vcc_io>;
- dvp-supply = <&dovdd_1v8>;
- flash0-supply = <&vcc_flash>;
- flash1-supply = <&vcc_lan>;
- gpio30-supply = <&vcc_io>;
- gpio1830-supply = <&vcc_io>;
- lcdc-supply = <&vcc_io>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vccio_wl>;
- };
-
ir: ir-receiver {
compatible = "gpio-ir-receiver";
pinctrl-names = "default";
status = "okay";
};
+&io_domains {
+ status = "okay";
+
+ audio-supply = <&vcca_33>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&dovdd_1v8>;
+ flash0-supply = <&vcc_flash>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vccio_wl>;
+};
+
&pinctrl {
pcfg_output_high: pcfg-output-high {
output-high;
clock-output-names = "ext_gmac";
};
- io_domains: io-domains {
- compatible = "rockchip,rk3288-io-voltage-domain";
-
- audio-supply = <&vcca_33>;
- flash0-supply = <&vcc_flash>;
- flash1-supply = <&vcc_lan>;
- gpio30-supply = <&vcc_io>;
- gpio1830-supply = <&vcc_io>;
- lcdc-supply = <&vcc_io>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vcc_18>;
- };
-
leds {
compatible = "gpio-leds";
status = "okay";
};
+&io_domains {
+ status = "okay";
+
+ audio-supply = <&vcca_33>;
+ flash0-supply = <&vcc_flash>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vcc_18>;
+};
+
&pinctrl {
pcfg_output_high: pcfg-output-high {
output-high;
};
};
- io_domains: io-domains {
- compatible = "rockchip,rk3288-io-voltage-domain";
- rockchip,grf = <&grf>;
-
- audio-supply = <&vcca_33>;
- bb-supply = <&vcc_io>;
- dvp-supply = <&vcc18_dvp>;
- flash0-supply = <&vcc_flash>;
- flash1-supply = <&vcc_lan>;
- gpio30-supply = <&vcc_io>;
- gpio1830-supply = <&vcc_io>;
- lcdc-supply = <&vcc_io>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vccio_wl>;
- };
-
ir: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
+&io_domains {
+ status = "okay";
+
+ audio-supply = <&vcca_33>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&vcc18_dvp>;
+ flash0-supply = <&vcc_flash>;
+ flash1-supply = <&vcc_lan>;
+ gpio30-supply = <&vcc_io>;
+ gpio1830-supply = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vccio_wl>;
+};
+
&pinctrl {
ak8963 {
comp_int: comp-int {
clock-output-names = "ext_gmac";
};
- io_domains: io-domains {
- compatible = "rockchip,rk3288-io-voltage-domain";
- rockchip,grf = <&grf>;
-
- audio-supply = <&vcc_io>;
- bb-supply = <&vcc_io>;
- dvp-supply = <&vcc_18>;
- flash0-supply = <&vcc_flash>;
- flash1-supply = <&vccio_pmu>;
- gpio30-supply = <&vccio_pmu>;
- gpio1830 = <&vcc_io>;
- lcdc-supply = <&vcc_io>;
- sdcard-supply = <&vccio_sd>;
- wifi-supply = <&vcc_18>;
- };
-
vcc_flash: flash-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc_sys";
};
};
+&io_domains {
+ status = "okay";
+
+ audio-supply = <&vcc_io>;
+ bb-supply = <&vcc_io>;
+ dvp-supply = <&vcc_18>;
+ flash0-supply = <&vcc_flash>;
+ flash1-supply = <&vccio_pmu>;
+ gpio30-supply = <&vccio_pmu>;
+ gpio1830 = <&vcc_io>;
+ lcdc-supply = <&vcc_io>;
+ sdcard-supply = <&vccio_sd>;
+ wifi-supply = <&vcc_18>;
+};
+
&pinctrl {
pcfg_output_high: pcfg-output-high {
output-high;
--- /dev/null
+/*
+ * Google Veyron (and derivatives) fragment for the max98090 audio
+ * codec and analog headphone jack.
+ *
+ * Copyright 2016 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+ sound {
+ compatible = "rockchip,rockchip-audio-max98090";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mic_det>, <&hp_det>;
+ rockchip,model = "VEYRON-I2S";
+ rockchip,i2s-controller = <&i2s>;
+ rockchip,audio-codec = <&max98090>;
+ rockchip,hp-det-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
+ rockchip,mic-det-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+ rockchip,headset-codec = <&headsetcodec>;
+ };
+};
+
+&i2c2 {
+ max98090: max98090@10 {
+ compatible = "maxim,max98090";
+ reg = <0x10>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ clock-names = "mclk";
+ clocks = <&cru SCLK_I2S0_OUT>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&int_codec>;
+ };
+};
+
+&i2c4 {
+ headsetcodec: ts3a227e@3b {
+ compatible = "ti,ts3a227e";
+ reg = <0x3b>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts3a227e_int_l>;
+ ti,micbias = <7>; /* MICBIAS = 2.8V */
+ };
+};
+
+&i2s {
+ status = "okay";
+};
+
+&io_domains {
+ audio-supply = <&vcc18_codec>;
+};
+
+&rk808 {
+ vcc10-supply = <&vcc33_sys>;
+
+ regulators {
+ vcc18_codec: LDO_REG6 {
+ regulator-name = "vcc18_codec";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ codec {
+ hp_det: hp-det {
+ rockchip,pins = <6 5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ /*
+ * HACK: We're going to _pull down_ this _active low_ interrupt
+ * so that it never fires. We don't need this interrupt because
+ * we've got a ts3a227e chip but the driver requires it.
+ */
+ int_codec: int-codec {
+ rockchip,pins = <6 7 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ mic_det: mic-det {
+ rockchip,pins = <6 11 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ headset {
+ ts3a227e_int_l: ts3a227e-int-l {
+ rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+};
#include <dt-bindings/clock/rockchip,rk808.h>
#include <dt-bindings/input/input.h>
#include "rk3288-veyron.dtsi"
+#include "rk3288-veyron-analog-audio.dtsi"
#include "rk3288-veyron-sdmmc.dtsi"
/ {
reset-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
};
- io_domains: io-domains {
- compatible = "rockchip,rk3288-io-voltage-domain";
- rockchip,grf = <&grf>;
-
- bb-supply = <&vcc33_io>;
- dvp-supply = <&vcc_18>;
- flash0-supply = <&vcc18_flashio>;
- gpio1830-supply = <&vcc33_io>;
- gpio30-supply = <&vcc33_io>;
- lcdc-supply = <&vcc33_lcd>;
- wifi-supply = <&vcc18_wl>;
- };
-
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
clocks = <&rk808 RK808_CLKOUT1>;
i2c-scl-rising-time-ns = <1000>;
};
+&io_domains {
+ status = "okay";
+
+ bb-supply = <&vcc33_io>;
+ dvp-supply = <&vcc_18>;
+ flash0-supply = <&vcc18_flashio>;
+ gpio1830-supply = <&vcc33_io>;
+ gpio30-supply = <&vcc33_io>;
+ lcdc-supply = <&vcc33_lcd>;
+ wifi-supply = <&vcc18_wl>;
+};
+
&pwm1 {
status = "okay";
};
status = "okay";
rx-sample-delay-ns = <12>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ };
};
&tsadc {
#phy-cells = <0>;
status = "disabled";
};
+
+ io_domains: io-domains {
+ compatible = "rockchip,rk3288-io-voltage-domain";
+ status = "disabled";
+ };
};
wdt: watchdog@ff800000 {
};
};
+ pmu {
+ compatible = "arm,cortex-a5-pmu";
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
memory {
reg = <0x20000000 0x20000000>;
};
compatible = "renesas,kzm9g", "renesas,sh73a0";
aliases {
- serial4 = &scifa4;
+ serial0 = &scifa4;
};
cpus {
};
chosen {
- bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
- stdout-path = &scifa4;
+ bootargs = "root=/dev/nfs ip=dhcp ignore_loglevel rw";
+ stdout-path = "serial0:115200n8";
};
- memory {
+ memory@40000000 {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
- reg_1p8v: regulator@0 {
+ reg_1p8v: regulator-1p8v {
compatible = "regulator-fixed";
regulator-name = "fixed-1.8V";
regulator-min-microvolt = <1800000>;
regulator-boot-on;
};
- reg_3p3v: regulator@1 {
+ reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-boot-on;
};
- vmmc_sdhi0: regulator@2 {
+ vmmc_sdhi0: regulator-vmmc-sdhi0 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
enable-active-high;
};
- vmmc_sdhi2: regulator@3 {
+ vmmc_sdhi2: regulator-vmmc-sdhi2 {
compatible = "regulator-fixed";
regulator-name = "SDHI2 Vcc";
regulator-min-microvolt = <3300000>;
};
};
- scifa4_pins: serial4 {
+ scifa4_pins: scifa4 {
groups = "scifa4_data", "scifa4_ctrl";
function = "scifa4";
};
pinctrl-0 = <&scifa4_pins>;
pinctrl-names = "default";
+ uart-has-rtscts;
status = "okay";
};
<0xf0000100 0x100>;
};
- L2: cache-controller {
+ L2: cache-controller@f0100000 {
compatible = "arm,pl310-cache";
reg = <0xf0100000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
reg = <0xffcfb100 0x80>;
};
- sdramedac {
- compatible = "altr,sdram-edac-a10";
- altr,sdr-syscon = <&sdr>;
- interrupts = <0 2 4>, <0 0 4>;
- };
-
L2: l2-cache@fffff000 {
compatible = "arm,pl310-cache";
reg = <0xfffff000 0x1000>;
#size-cells = <1>;
interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>,
<0 0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
ranges;
+ sdramedac {
+ compatible = "altr,sdram-edac-a10";
+ altr,sdr-syscon = <&sdr>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH>,
+ <49 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
l2-ecc@ffd06010 {
compatible = "altr,socfpga-a10-l2-ecc";
reg = <0xffd06010 0x4>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
+ <32 IRQ_TYPE_LEVEL_HIGH>;
};
ocram-ecc@ff8c3000 {
compatible = "altr,socfpga-a10-ocram-ecc";
reg = <0xff8c3000 0x400>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH>,
+ <33 IRQ_TYPE_LEVEL_HIGH>;
};
};
model = "Altera SOCFPGA Arria 10";
compatible = "altr,socfpga-arria10", "altr,socfpga";
+ aliases {
+ ethernet0 = &gmac0;
+ serial0 = &uart1;
+ };
+
chosen {
bootargs = "earlyprintk";
- stdout-path = "serial1:115200n8";
+ stdout-path = "serial0:115200n8";
};
memory {
#interrupt-cells = <2>;
ab8500_gpio: ab8500-gpio {
+ compatible = "stericsson,ab8500-gpio";
gpio-controller;
#gpio-cells = <2>;
};
prcmu@80157000 {
ab8500 {
ab8500-gpio {
- compatible = "stericsson,ab8500-gpio";
};
ab8500-regulators {
compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500";
soc {
+ /* Name the GPIO muxed rails on the HREF boards */
+ gpio@8012e000 {
+ /* GPIOs 0 - 31 */
+ gpio-line-names =
+ /* GPIO0,1 used for UART0 BT RX/TX */
+ "", "",
+ "UART_WAKE",
+ "BT_WAKE",
+ "",
+ "SDMMC_1V8_3V_SEL",
+ "FLASH_LED_SYNC (FLASH_CTRL_0)",
+ "XENON_READY (FLASH_CTRL_1)",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "",
+ "",
+ "FLASH_LED_EN (FLASH_CTRL_3)",
+ "", "",
+ "", "", "", "", "",
+ /* Used by UART2 (console) */
+ "", "",
+ "MAGNETOMETER_INT";
+ };
+
+ gpio@8012e080 {
+ /* GPIOs 32 - 63 */
+ gpio-line-names =
+ "MAGNETOMETER_DRDY",
+ "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e000 {
+ /* GPIOs 64 - 95 */
+ gpio-line-names = "XENON_EN2 (FLASH_CTRL_4)",
+ "DISP1_RST",
+ "DISP2_RST",
+ "TOUCH_INT2",
+ "LCD_VSI0_A",
+ "LCD_VSI1_A",
+ /* GPIO 70-77 used for ETM */
+ "", "", "", "", "", "", "", "",
+ /* GPIO 78-81 used for YCBCR */
+ "", "", "", "",
+ "ACCELEROMETER_INT1_RDY",
+ "ACCELEROMETER_INT2",
+ "TOUCH_INT",
+ "WLAN_ENA",
+ "", "", "", "", "",
+ "FORCE_SENSING_INT",
+ "FORCE_SENSING_RESET",
+ "", "",
+ "SDMMC_CD";
+ };
+
+ gpio@8000e080 {
+ /* GPIOs 96 - 127 */
+ gpio-line-names = "",
+ "FORCE_SENSING_WU",
+ "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e100 {
+ /* GPIOs 128 - 159 */
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "",
+ "DIPRO_INT", /* GPIO139 */
+ "XSHUTDOWN_SECONDARY_SENSOR",
+ "XSHUTDOWN_PRIMARY_SENSOR",
+ "NFC_RST (NFC_CTRL_",
+ "TOUCH_RST",
+ "NFC_IRQ (NFC_CTRL_1)",
+ "HAL_SW",
+ "TOUCH_RST2",
+ "", "",
+ "VAUDIO_HF_EN", /* GPIO149 */
+ "", "", "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e180 {
+ /* GPIOs 160 - 191 */
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "",
+ "SDMMC_EN",
+ "XENON_CHARGE (FLASH_CONTROL_5)",
+ "GBF_ENA_RESET",
+ "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8011e000 {
+ /* GPIOs 192 - 223 */
+ gpio-line-names = "HDTV_INTN",
+ "", "", "",
+ "HDTV_RSTN",
+ "", "", "",
+ "", /* GPIO200 */
+ "", "", "", "", "", "", "",
+ /* GPIO208-216 used for WGBF_MC1 */
+ "", "", "", "", "", "", "", "", "",
+ "SW_FRONT_PROXIMITY", /* GPIO217 */
+ "KPD_CTRL_INT", /* Keypad controller */
+ "", "", "", "", "";
+ };
+
+ gpio@8011e080 {
+ /* GPIOs 224 - 255 */
+ gpio-line-names = "", "",
+ "HSIT_ACWAKE0",
+ "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
// External Micro SD slot
sdi0_per1@80126000 {
cd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; // 95
};
soc {
+ /* Name the GPIO muxed rails on the Snowball board */
+ gpio@8012e000 {
+ /* GPIOs 0 - 31 */
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "",
+ "AP_GPIO31";
+ };
+
+ gpio@8012e080 {
+ /* GPIOs 32 - 63 */
+ gpio-line-names = "USR PB", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e000 {
+ /* GPIOs 64 - 95 */
+ gpio-line-names = "", "", "", "", "AP_GPIO68", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e100 {
+ /* GPIOs 128 - 159 */
+ gpio-line-names = "", "", "", "", "", "", "", "",
+ "", "", "", "", "IRQ_LAN", "RSTn_LAN",
+ "USR_LED", "", "", "", "", "", "",
+ "", "", "AP_GPIO151", "AP_GPIO152",
+ "", "", "", "", "", "", "";
+ };
+
+ gpio@8000e180 {
+ /* GPIOs 160 - 191 */
+ gpio-line-names = "", "AP_GPIO161", "AP_GPIO162",
+ "ACCELEROMETER_INT1_RDY",
+ "ACCELEROMETER_INT2", "MAG_DRDY",
+ "GYRO_DRDY", "RSTn_MLC", "RSTn_SLC",
+ "GYRO_INT", "UART_WAKE", "GBF_RESET",
+ "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
+ gpio@8011e000 {
+ /* GPIOs 192 - 223 */
+ gpio-line-names = "HDTV_INTn", "", "", "", "HDTV_RST",
+ "", "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "", "",
+ "WLAN_RESETN", "WLAN_IRQ", "MMC_EN",
+ "MMC_CD", "", "", "", "", "";
+ };
+
+ gpio@8011e080 {
+ /* GPIOs 224 - 255 */
+ gpio-line-names = "", "", "", "", "SD_SEL", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "",
+ "", "", "", "", "", "", "", "";
+ };
+
usb_per5@a03e0000 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&musb_default_mode>;
ab8500 {
ab8500-gpio {
- compatible = "stericsson,ab8500-gpio";
+ /*
+ * AB8500 GPIOs are numbered starting from 1, so the first
+ * index 0 is what in the datasheet is called "GPIO1", and
+ * the second is "GPIO2" and so forth. Confusingly, the
+ * Snowball schematic then names the "GPIO2" line "PM_GPIO1".
+ * while later naming "GPIO4" as "PM_GPIO4".
+ */
+ gpio-line-names = "", /* AB8500 GPIO1 */
+ "PM_GPIO1", /* AB8500 GPIO2 */
+ "WLAN_CLK_REQ", /* AB8500 GPIO3 */
+ "PM_GPIO4", /* AB8500 GPIO4 */
+ "", "", "", "", "", "", "", "", "", "", "",
+ "EN_3V6", /* AB8500 GPIO16 */
+ "", "", "", "" ,"", "", "", "", "",
+ "EN_3V3", /* AB8500 GPIO26 */
+ "", "", "", "", "", "", "", "", "", "", "", "", "",
+ "PM_GPIO40", /* AB8500 GPIO40 */
+ "PM_GPIO41", /* AB8500 GPIO41 */
+ "PM_GPIO42"; /* AB8500 GPIO42 */
};
ext_regulators: ab8500-ext-regulators {
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
reg = <0x58c00000 0x400>;
#address-cells = <2>;
#size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_system_bus>;
};
smpctrl@59800000 {
interrupt-controller;
};
- pinctrl: pinctrl@5f801000 {
- /* specify compatible in each SoC DTSI */
- reg = <0x5f801000 0xe00>;
+ soc-glue@5f800000 {
+ compatible = "simple-mfd", "syscon";
+ reg = <0x5f800000 0x2000>;
+
+ pinctrl: pinctrl {
+ /* specify compatible in each SoC DTSI */
+ };
};
};
};
};
&pinctrl {
- compatible = "socionext,ph1-ld4-pinctrl", "syscon";
+ compatible = "socionext,uniphier-ld4-pinctrl";
};
* which makes the pinctrl driver unshareable.
*/
&pinctrl {
- compatible = "socionext,ph1-ld6b-pinctrl", "syscon";
+ compatible = "socionext,uniphier-ld6b-pinctrl";
};
};
&pinctrl {
- compatible = "socionext,ph1-pro4-pinctrl", "syscon";
+ compatible = "socionext,uniphier-pro4-pinctrl";
};
};
&pinctrl {
- compatible = "socionext,ph1-pro5-pinctrl", "syscon";
+ compatible = "socionext,uniphier-pro5-pinctrl";
};
};
&pinctrl {
- compatible = "socionext,ph1-sld8-pinctrl", "syscon";
+ compatible = "socionext,uniphier-sld8-pinctrl";
};
function = "nand";
};
+ pinctrl_system_bus: system_bus_grp {
+ groups = "system_bus", "system_bus_cs1";
+ function = "system_bus";
+ };
+
pinctrl_uart0: uart0_grp {
groups = "uart0";
function = "uart0";
};
chosen {
- stdout-path = "serial2:115200n8";
+ stdout-path = "serial0:115200n8";
};
aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
+ serial0 = &serial2;
+ serial1 = &serial0;
+ serial2 = &serial1;
i2c0 = &i2c0;
i2c2 = &i2c2;
i2c4 = &i2c4;
};
chosen {
- stdout-path = "serial2:115200n8";
+ stdout-path = "serial0:115200n8";
};
aliases {
- serial0 = &serial0;
- serial1 = &serial1;
- serial2 = &serial2;
+ serial0 = &serial2;
+ serial1 = &serial0;
+ serial2 = &serial1;
i2c0 = &i2c0;
i2c4 = &i2c4;
i2c5 = &i2c5;
};
&pinctrl {
- compatible = "socionext,proxstream2-pinctrl", "syscon";
+ compatible = "socionext,uniphier-pxs2-pinctrl";
};
/ {
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
};
};
- usb0: ohci@00500000 {
+ usb0: ohci@500000 {
num-ports = <2>;
status = "okay";
};
};
clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
slow_xtal {
clock-frequency = <32768>;
};
/ {
chosen {
- bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
+ bootargs = "mem=64M root=/dev/mtdblock5 rw rootfstype=ubifs";
+ stdout-path = "serial0:115200n8";
};
memory {
if (ret)
return ret;
- vfp_flush_hwstate(thread);
thread->vfpstate.hard = new_vfp;
+ vfp_flush_hwstate(thread);
return 0;
}
#define OF_SECONDARY_BOOT "secondary-boot-reg"
#define MPIDR_CPUID_BITMASK 0x3
-/* I/O address of register used to coordinate secondary core startup */
-static u32 secondary_boot_addr;
-
/*
* Enable the Cortex A9 Snoop Control Unit
*
return 0;
}
-static int nsp_write_lut(void)
+static u32 secondary_boot_addr_for(unsigned int cpu)
+{
+ u32 secondary_boot_addr = 0;
+ struct device_node *cpu_node = of_get_cpu_node(cpu, NULL);
+
+ if (!cpu_node) {
+ pr_err("Failed to find device tree node for CPU%u\n", cpu);
+ return 0;
+ }
+
+ if (of_property_read_u32(cpu_node,
+ OF_SECONDARY_BOOT,
+ &secondary_boot_addr))
+ pr_err("required secondary boot register not specified for CPU%u\n",
+ cpu);
+
+ of_node_put(cpu_node);
+
+ return secondary_boot_addr;
+}
+
+static int nsp_write_lut(unsigned int cpu)
{
void __iomem *sku_rom_lut;
phys_addr_t secondary_startup_phy;
+ const u32 secondary_boot_addr = secondary_boot_addr_for(cpu);
- if (!secondary_boot_addr) {
- pr_warn("required secondary boot register not specified\n");
+ if (!secondary_boot_addr)
return -EINVAL;
- }
sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr,
- sizeof(secondary_boot_addr));
+ sizeof(phys_addr_t));
if (!sku_rom_lut) {
- pr_warn("unable to ioremap SKU-ROM LUT register\n");
+ pr_warn("unable to ioremap SKU-ROM LUT register for cpu %u\n", cpu);
return -ENOMEM;
}
static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
{
- static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
- struct device_node *cpus_node = NULL;
- struct device_node *cpu_node = NULL;
- int ret;
-
- /*
- * This function is only called via smp_ops->smp_prepare_cpu().
- * That only happens if a "/cpus" device tree node exists
- * and has an "enable-method" property that selects the SMP
- * operations defined herein.
- */
- cpus_node = of_find_node_by_path("/cpus");
- if (!cpus_node)
- return;
-
- for_each_child_of_node(cpus_node, cpu_node) {
- u32 cpuid;
-
- if (of_node_cmp(cpu_node->type, "cpu"))
- continue;
-
- if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
- pr_debug("%s: missing reg property\n",
- cpu_node->full_name);
- ret = -ENOENT;
- goto out;
- }
-
- /*
- * "secondary-boot-reg" property should be defined only
- * for secondary cpu
- */
- if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
- /*
- * Our secondary enable method requires a
- * "secondary-boot-reg" property to specify a register
- * address used to request the ROM code boot a secondary
- * core. If we have any trouble getting this we fall
- * back to uniprocessor mode.
- */
- if (of_property_read_u32(cpu_node,
- OF_SECONDARY_BOOT,
- &secondary_boot_addr)) {
- pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
- cpu_node->name);
- ret = -ENOENT;
- goto out;
- }
- }
- }
-
- /*
- * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
- * returned, the SoC reported a uniprocessor configuration.
- * We bail on any other error.
- */
- ret = scu_a9_enable();
-out:
- of_node_put(cpu_node);
- of_node_put(cpus_node);
+ const cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
- if (ret) {
+ /* Enable the SCU on Cortex A9 based SoCs */
+ if (scu_a9_enable()) {
/* Update the CPU present map to reflect uniprocessor mode */
- pr_warn("disabling SMP\n");
+ pr_warn("failed to enable A9 SCU - disabling SMP\n");
init_cpu_present(&only_cpu_0);
}
}
u32 cpu_id;
u32 boot_val;
bool timeout = false;
+ const u32 secondary_boot_addr = secondary_boot_addr_for(cpu);
cpu_id = cpu_logical_map(cpu);
if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
return -EINVAL;
}
- if (!secondary_boot_addr) {
- pr_err("required secondary boot register not specified\n");
+ if (!secondary_boot_addr)
return -EINVAL;
- }
- boot_reg = ioremap_nocache(
- (phys_addr_t)secondary_boot_addr, sizeof(u32));
+ boot_reg = ioremap_nocache((phys_addr_t)secondary_boot_addr,
+ sizeof(phys_addr_t));
if (!boot_reg) {
pr_err("unable to map boot register for cpu %u\n", cpu_id);
return -ENOMEM;
* After wake up, secondary core branches to the startup
* address programmed at SKU ROM LUT location.
*/
- ret = nsp_write_lut();
+ ret = nsp_write_lut(cpu);
if (ret) {
pr_err("unable to write startup addr to SKU ROM LUT\n");
goto out;
return ret;
}
-static const struct smp_operations bcm_smp_ops __initconst = {
+static const struct smp_operations kona_smp_ops __initconst = {
.smp_prepare_cpus = bcm_smp_prepare_cpus,
.smp_boot_secondary = kona_boot_secondary,
};
CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
- &bcm_smp_ops);
+ &kona_smp_ops);
static const struct smp_operations nsp_smp_ops __initconst = {
.smp_prepare_cpus = bcm_smp_prepare_cpus,
obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o
CFLAGS_mcpm-exynos.o += -march=armv7-a
-
-obj-$(CONFIG_S5P_DEV_MFC) += s5p-dev-mfc.o
#include <mach/map.h>
#include "common.h"
-#include "mfc.h"
static struct map_desc exynos4_iodesc[] __initdata = {
{
NULL
};
-static void __init exynos_reserve(void)
-{
-#ifdef CONFIG_S5P_DEV_MFC
- int i;
- char *mfc_mem[] = {
- "samsung,mfc-v5",
- "samsung,mfc-v6",
- "samsung,mfc-v7",
- "samsung,mfc-v8",
- };
-
- for (i = 0; i < ARRAY_SIZE(mfc_mem); i++)
- if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i]))
- break;
-#endif
-}
-
static void __init exynos_dt_fixup(void)
{
/*
.init_machine = exynos_dt_machine_init,
.init_late = exynos_init_late,
.dt_compat = exynos_dt_compat,
- .reserve = exynos_reserve,
.dt_fixup = exynos_dt_fixup,
MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2013 Samsung Electronics Co.Ltd
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __MACH_EXYNOS_MFC_H
-#define __MACH_EXYNOS_MFC_H __FILE__
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
- int depth, void *data);
-
-#endif /* __MACH_EXYNOS_MFC_H */
+++ /dev/null
-/*
- * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd
- *
- * Base S5P MFC resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/memblock.h>
-#include <linux/ioport.h>
-#include <linux/of_fdt.h>
-#include <linux/of.h>
-
-static struct platform_device s5p_device_mfc_l;
-static struct platform_device s5p_device_mfc_r;
-
-struct s5p_mfc_dt_meminfo {
- unsigned long loff;
- unsigned long lsize;
- unsigned long roff;
- unsigned long rsize;
- char *compatible;
-};
-
-struct s5p_mfc_reserved_mem {
- phys_addr_t base;
- unsigned long size;
- struct device *dev;
-};
-
-static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
-
-
-static void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
- phys_addr_t lbase, unsigned int lsize)
-{
- int i;
-
- s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev;
- s5p_mfc_mem[0].base = rbase;
- s5p_mfc_mem[0].size = rsize;
-
- s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev;
- s5p_mfc_mem[1].base = lbase;
- s5p_mfc_mem[1].size = lsize;
-
- for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) {
- struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i];
- if (memblock_remove(area->base, area->size)) {
- printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n",
- area->size, (unsigned long) area->base);
- area->base = 0;
- }
- }
-}
-
-int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
- int depth, void *data)
-{
- const __be32 *prop;
- int len;
- struct s5p_mfc_dt_meminfo mfc_mem;
-
- if (!data)
- return 0;
-
- if (!of_flat_dt_is_compatible(node, data))
- return 0;
-
- prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len);
- if (!prop || (len != 2 * sizeof(unsigned long)))
- return 0;
-
- mfc_mem.loff = be32_to_cpu(prop[0]);
- mfc_mem.lsize = be32_to_cpu(prop[1]);
-
- prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len);
- if (!prop || (len != 2 * sizeof(unsigned long)))
- return 0;
-
- mfc_mem.roff = be32_to_cpu(prop[0]);
- mfc_mem.rsize = be32_to_cpu(prop[1]);
-
- s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize,
- mfc_mem.loff, mfc_mem.lsize);
-
- return 1;
-}
init.name = dev_name(cpu_dev);
init.ops = &clk_spc_ops;
- init.flags = CLK_IS_ROOT | CLK_GET_RATE_NOCACHE;
+ init.flags = CLK_GET_RATE_NOCACHE;
init.num_parents = 0;
return devm_clk_register(cpu_dev, &spc->hw);
config MMU
def_bool y
+config ARM64_PAGE_SHIFT
+ int
+ default 16 if ARM64_64K_PAGES
+ default 14 if ARM64_16K_PAGES
+ default 12
+
+config ARM64_CONT_SHIFT
+ int
+ default 5 if ARM64_64K_PAGES
+ default 7 if ARM64_16K_PAGES
+ default 4
+
config ARCH_MMAP_RND_BITS_MIN
default 14 if ARM64_64K_PAGES
default 16 if ARM64_16K_PAGES
If unsure, say Y.
+config CAVIUM_ERRATUM_23144
+ bool "Cavium erratum 23144: ITS SYNC hang on dual socket system"
+ depends on NUMA
+ default y
+ help
+ ITS SYNC command hang for cross node io and collections/cpu mapping.
+
+ If unsure, say Y.
+
config CAVIUM_ERRATUM_23154
bool "Cavium erratum 23154: Access to ICC_IAR1_EL1 is not sync'ed"
default y
who are working in architecture specific areas of the kernel.
It is probably not a good idea to enable this feature in a production
kernel.
- If in doubt, say "N"
+
+ If in doubt, say N.
config PID_IN_CONTEXTIDR
bool "Write the current PID to the CONTEXTIDR register"
value.
config DEBUG_SET_MODULE_RONX
- bool "Set loadable kernel module data as NX and text as RO"
- depends on MODULES
- help
- This option helps catch unintended modifications to loadable
- kernel module's text and read-only data. It also prevents execution
- of module data. Such protection may interfere with run-time code
- patching and dynamic kernel tracing - and they might also protect
- against certain classes of kernel exploits.
- If in doubt, say "N".
+ bool "Set loadable kernel module data as NX and text as RO"
+ depends on MODULES
+ default y
+ help
+ Is this is set, kernel module text and rodata will be made read-only.
+ This is to help catch accidental or malicious attempts to change the
+ kernel's executable code.
+
+ If in doubt, say Y.
config DEBUG_RODATA
bool "Make kernel text and rodata read-only"
is to help catch accidental or malicious attempts to change the
kernel's executable code.
- If in doubt, say Y
+ If in doubt, say Y.
config DEBUG_ALIGN_RODATA
depends on DEBUG_RODATA
alignment and potentially wasted space. Turn on this option if
performance is more important than memory pressure.
- If in doubt, say N
+ If in doubt, say N.
source "drivers/hwtracing/coresight/Kconfig"
# The byte offset of the kernel image in RAM from the start of RAM.
ifeq ($(CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET), y)
-TEXT_OFFSET := $(shell awk 'BEGIN {srand(); printf "0x%03x000\n", int(512 * rand())}')
+TEXT_OFFSET := $(shell awk "BEGIN {srand(); printf \"0x%06x\n\", \
+ int(2 * 1024 * 1024 / (2 ^ $(CONFIG_ARM64_PAGE_SHIFT)) * \
+ rand()) * (2 ^ $(CONFIG_ARM64_PAGE_SHIFT))}")
else
TEXT_OFFSET := 0x00080000
endif
#define STACK_RND_MASK (0x3ffff >> (PAGE_SHIFT - 12))
#endif
-#ifdef CONFIG_COMPAT
-
#ifdef __AARCH64EB__
#define COMPAT_ELF_PLATFORM ("v8b")
#else
#define COMPAT_ELF_PLATFORM ("v8l")
#endif
+#ifdef CONFIG_COMPAT
+
#define COMPAT_ELF_ET_DYN_BASE (2 * TASK_SIZE_32 / 3)
/* AArch32 registers. */
#define VMEMMAP_SIZE (UL(1) << (VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT))
/*
- * PAGE_OFFSET - the virtual address of the start of the kernel image (top
+ * PAGE_OFFSET - the virtual address of the start of the linear map (top
* (VA_BITS - 1))
+ * KIMAGE_VADDR - the virtual address of the start of the kernel image
* VA_BITS - the maximum number of bits for virtual addresses.
* VA_START - the first kernel virtual address.
* TASK_SIZE - the maximum size of a user space task.
/* PAGE_SHIFT determines the page size */
/* CONT_SHIFT determines the number of pages which can be tracked together */
-#ifdef CONFIG_ARM64_64K_PAGES
-#define PAGE_SHIFT 16
-#define CONT_SHIFT 5
-#elif defined(CONFIG_ARM64_16K_PAGES)
-#define PAGE_SHIFT 14
-#define CONT_SHIFT 7
-#else
-#define PAGE_SHIFT 12
-#define CONT_SHIFT 4
-#endif
+#define PAGE_SHIFT CONFIG_ARM64_PAGE_SHIFT
+#define CONT_SHIFT CONFIG_ARM64_CONT_SHIFT
#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#define segment_eq(a, b) ((a) == (b))
-/*
- * Return 1 if addr < current->addr_limit, 0 otherwise.
- */
-#define __addr_ok(addr) \
-({ \
- unsigned long flag; \
- asm("cmp %1, %0; cset %0, lo" \
- : "=&r" (flag) \
- : "r" (addr), "0" (current_thread_info()->addr_limit) \
- : "cc"); \
- flag; \
-})
-
/*
* Test whether a block of memory is a valid user space address.
* Returns 1 if the range is valid, 0 otherwise.
#define __ARM_NR_compat_cacheflush (__ARM_NR_COMPAT_BASE+2)
#define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE+5)
-#define __NR_compat_syscalls 390
+#define __NR_compat_syscalls 394
#endif
#define __ARCH_WANT_SYS_CLONE
__SYSCALL(__NR_userfaultfd, sys_userfaultfd)
#define __NR_membarrier 389
__SYSCALL(__NR_membarrier, sys_membarrier)
+#define __NR_mlock2 390
+__SYSCALL(__NR_mlock2, sys_mlock2)
+#define __NR_copy_file_range 391
+__SYSCALL(__NR_copy_file_range, sys_copy_file_range)
+#define __NR_preadv2 392
+__SYSCALL(__NR_preadv2, compat_sys_preadv2)
+#define __NR_pwritev2 393
+__SYSCALL(__NR_pwritev2, compat_sys_pwritev2)
/*
* Please add new compat syscalls above this comment and update
#include <linux/bitops.h>
#include <linux/bug.h>
+#include <linux/compat.h>
+#include <linux/elf.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/personality.h>
static int c_show(struct seq_file *m, void *v)
{
int i, j;
+ bool compat = personality(current->personality) == PER_LINUX32;
for_each_online_cpu(i) {
struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i);
* "processor". Give glibc what it expects.
*/
seq_printf(m, "processor\t: %d\n", i);
+ if (compat)
+ seq_printf(m, "model name\t: ARMv8 Processor rev %d (%s)\n",
+ MIDR_REVISION(midr), COMPAT_ELF_PLATFORM);
seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
loops_per_jiffy / (500000UL/HZ),
* software which does already (at least for 32-bit).
*/
seq_puts(m, "Features\t:");
- if (personality(current->personality) == PER_LINUX32) {
+ if (compat) {
#ifdef CONFIG_COMPAT
for (j = 0; compat_hwcap_str[j]; j++)
if (compat_elf_hwcap & (1 << j))
void __user *pc = (void __user *)instruction_pointer(regs);
console_verbose();
- pr_crit("Bad mode in %s handler detected, code 0x%08x -- %s\n",
- handler[reason], esr, esr_get_class_string(esr));
+ pr_crit("Bad mode in %s handler detected on CPU%d, code 0x%08x -- %s\n",
+ handler[reason], smp_processor_id(), esr,
+ esr_get_class_string(esr));
__show_regs(regs);
info.si_signo = SIGILL;
* Make sure stores to the GIC via the memory mapped interface
* are now visible to the system register interface.
*/
- dsb(st);
+ if (!cpu_if->vgic_sre)
+ dsb(st);
cpu_if->vgic_vmcr = read_gicreg(ICH_VMCR_EL2);
if (!(vcpu->arch.vgic_cpu.live_lrs & (1UL << i)))
continue;
- if (cpu_if->vgic_elrsr & (1 << i)) {
+ if (cpu_if->vgic_elrsr & (1 << i))
cpu_if->vgic_lr[i] &= ~ICH_LR_STATE;
- continue;
- }
+ else
+ cpu_if->vgic_lr[i] = __gic_v3_get_lr(i);
- cpu_if->vgic_lr[i] = __gic_v3_get_lr(i);
__gic_v3_set_lr(0, i);
}
val = read_gicreg(ICC_SRE_EL2);
write_gicreg(val | ICC_SRE_EL2_ENABLE, ICC_SRE_EL2);
- isb(); /* Make sure ENABLE is set at EL2 before setting SRE at EL1 */
- write_gicreg(1, ICC_SRE_EL1);
+
+ if (!cpu_if->vgic_sre) {
+ /* Make sure ENABLE is set at EL2 before setting SRE at EL1 */
+ isb();
+ write_gicreg(1, ICC_SRE_EL1);
+ }
}
void __hyp_text __vgic_v3_restore_state(struct kvm_vcpu *vcpu)
* been actually programmed with the value we want before
* starting to mess with the rest of the GIC.
*/
- write_gicreg(cpu_if->vgic_sre, ICC_SRE_EL1);
- isb();
+ if (!cpu_if->vgic_sre) {
+ write_gicreg(0, ICC_SRE_EL1);
+ isb();
+ }
val = read_gicreg(ICH_VTR_EL2);
max_lr_idx = vtr_to_max_lr_idx(val);
* (re)distributors. This ensure the guest will read the
* correct values from the memory-mapped interface.
*/
- isb();
- dsb(sy);
+ if (!cpu_if->vgic_sre) {
+ isb();
+ dsb(sy);
+ }
vcpu->arch.vgic_cpu.live_lrs = live_lrs;
/*
* Prevent the guest from touching the GIC system registers if
* SRE isn't enabled for GICv3 emulation.
*/
- if (!cpu_if->vgic_sre) {
- write_gicreg(read_gicreg(ICC_SRE_EL2) & ~ICC_SRE_EL2_ENABLE,
- ICC_SRE_EL2);
- }
+ write_gicreg(read_gicreg(ICC_SRE_EL2) & ~ICC_SRE_EL2_ENABLE,
+ ICC_SRE_EL2);
}
void __hyp_text __vgic_v3_init_lrs(void)
return true;
}
+static bool access_gic_sre(struct kvm_vcpu *vcpu,
+ struct sys_reg_params *p,
+ const struct sys_reg_desc *r)
+{
+ if (p->is_write)
+ return ignore_write(vcpu, p);
+
+ p->regval = vcpu->arch.vgic_cpu.vgic_v3.vgic_sre;
+ return true;
+}
+
static bool trap_raz_wi(struct kvm_vcpu *vcpu,
struct sys_reg_params *p,
const struct sys_reg_desc *r)
access_gic_sgi },
/* ICC_SRE_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b1100), Op2(0b101),
- trap_raz_wi },
+ access_gic_sre },
/* CONTEXTIDR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b001),
struct pg_level {
const struct prot_bits *bits;
+ const char *name;
size_t num;
u64 mask;
};
static struct pg_level pg_level[] = {
{
}, { /* pgd */
+ .name = "PGD",
.bits = pte_bits,
.num = ARRAY_SIZE(pte_bits),
}, { /* pud */
+ .name = (CONFIG_PGTABLE_LEVELS > 3) ? "PUD" : "PGD",
.bits = pte_bits,
.num = ARRAY_SIZE(pte_bits),
}, { /* pmd */
+ .name = (CONFIG_PGTABLE_LEVELS > 2) ? "PMD" : "PGD",
.bits = pte_bits,
.num = ARRAY_SIZE(pte_bits),
}, { /* pte */
+ .name = "PTE",
.bits = pte_bits,
.num = ARRAY_SIZE(pte_bits),
},
delta >>= 10;
unit++;
}
- seq_printf(st->seq, "%9lu%c", delta, *unit);
+ seq_printf(st->seq, "%9lu%c %s", delta, *unit,
+ pg_level[st->level].name);
if (pg_level[st->level].bits)
dump_prot(st, pg_level[st->level].bits,
pg_level[st->level].num);
* PTE_RDONLY is cleared by default in the asm below, so set it in
* back if necessary (read-only or clean PTE).
*/
- if (!pte_write(entry) || !dirty)
+ if (!pte_write(entry) || !pte_sw_dirty(entry))
pte_val(entry) |= PTE_RDONLY;
/*
hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
} else if (ps == PUD_SIZE) {
hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
+ } else if (ps == (PAGE_SIZE * CONT_PTES)) {
+ hugetlb_add_hstate(CONT_PTE_SHIFT);
+ } else if (ps == (PMD_SIZE * CONT_PMDS)) {
+ hugetlb_add_hstate((PMD_SHIFT + CONT_PMD_SHIFT) - PAGE_SHIFT);
} else {
hugetlb_bad_size();
pr_err("hugepagesz: Unsupported page size %lu K\n", ps >> 10);
return 1;
}
__setup("hugepagesz=", setup_hugepagesz);
+
+#ifdef CONFIG_ARM64_64K_PAGES
+static __init int add_default_hugepagesz(void)
+{
+ if (size_to_hstate(CONT_PTES * PAGE_SIZE) == NULL)
+ hugetlb_add_hstate(CONT_PMD_SHIFT);
+ return 0;
+}
+arch_initcall(add_default_hugepagesz);
+#endif
void parisc_terminate(char *msg, struct pt_regs *regs,
int code, unsigned long offset) __noreturn __cold;
+void die_if_kernel(char *str, struct pt_regs *regs, long err);
+
/* mm/fault.c */
void do_page_fault(struct pt_regs *regs, unsigned long code,
unsigned long address);
per_cpu(cpu_data, cpunum).fp_rev = coproc_cfg.revision;
per_cpu(cpu_data, cpunum).fp_model = coproc_cfg.model;
- printk(KERN_INFO "FP[%d] enabled: Rev %ld Model %ld\n",
- cpunum, coproc_cfg.revision, coproc_cfg.model);
+ if (cpunum == 0)
+ printk(KERN_INFO "FP[%d] enabled: Rev %ld Model %ld\n",
+ cpunum, coproc_cfg.revision, coproc_cfg.model);
/*
** store status register to stack (hopefully aligned)
clocks_calc_mult_shift(&cyc2ns_mul, &cyc2ns_shift, current_cr16_khz,
NSEC_PER_MSEC, 0);
-#if defined(CONFIG_HAVE_UNSTABLE_SCHED_CLOCK) && defined(CONFIG_64BIT)
- /* At bootup only one 64bit CPU is online and cr16 is "stable" */
- set_sched_clock_stable();
-#endif
-
start_cpu_itimer(); /* get CPU 0 started */
/* register at clocksource framework */
#include <linux/ratelimit.h>
#include <asm/uaccess.h>
#include <asm/hardirq.h>
+#include <asm/traps.h>
/* #define DEBUG_UNALIGNED 1 */
int unaligned_enabled __read_mostly = 1;
-void die_if_kernel (char *str, struct pt_regs *regs, long err);
-
static int emulate_ldh(struct pt_regs *regs, int toreg)
{
unsigned long saddr = regs->ior;
break;
}
- if (modify && R1(regs->iir))
+ if (ret == 0 && modify && R1(regs->iir))
regs->gr[R1(regs->iir)] = newbase;
if (ret)
{
+ /*
+ * The unaligned handler failed.
+ * If we were called by __get_user() or __put_user() jump
+ * to it's exception fixup handler instead of crashing.
+ */
+ if (!user_mode(regs) && fixup_exception(regs))
+ return;
+
printk(KERN_CRIT "Unaligned handler failed, ret = %d\n", ret);
die_if_kernel("Unaligned data reference", regs, 28);
if (addr >= kernel_unwind_table.start &&
addr <= kernel_unwind_table.end)
e = find_unwind_entry_in_table(&kernel_unwind_table, addr);
- else
+ else {
+ unsigned long flags;
+
+ spin_lock_irqsave(&unwind_lock, flags);
list_for_each_entry(table, &unwind_tables, list) {
if (addr >= table->start &&
addr <= table->end)
break;
}
}
+ spin_unlock_irqrestore(&unwind_lock, flags);
+ }
return e;
}
insn = *(unsigned int *)npc;
- if ((insn & 0xffffc000) == 0x37de0000 ||
- (insn & 0xffe00000) == 0x6fc00000) {
+ if ((insn & 0xffffc001) == 0x37de0000 ||
+ (insn & 0xffe00001) == 0x6fc00000) {
/* ldo X(sp), sp, or stwm X,D(sp) */
- frame_size += (insn & 0x1 ? -1 << 13 : 0) |
- ((insn & 0x3fff) >> 1);
+ frame_size += (insn & 0x3fff) >> 1;
dbg("analyzing func @ %lx, insn=%08x @ "
"%lx, frame_size = %ld\n", info->ip,
insn, npc, frame_size);
- } else if ((insn & 0xffe00008) == 0x73c00008) {
+ } else if ((insn & 0xffe00009) == 0x73c00008) {
/* std,ma X,D(sp) */
- frame_size += (insn & 0x1 ? -1 << 13 : 0) |
- (((insn >> 4) & 0x3ff) << 3);
+ frame_size += ((insn >> 4) & 0x3ff) << 3;
dbg("analyzing func @ %lx, insn=%08x @ "
"%lx, frame_size = %ld\n", info->ip,
insn, npc, frame_size);
}
}
+ if (frame_size > e->Total_frame_size << 3)
+ frame_size = e->Total_frame_size << 3;
+
if (!unwind_special(info, e->region_start, frame_size)) {
info->prev_sp = info->sp - frame_size;
if (e->Millicode)
static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
{
- pte_fragment_fre((unsigned long *)pte, 1);
+ pte_fragment_free((unsigned long *)pte, 1);
}
static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
#define MMCR0_FCWAIT 0x00000002UL /* freeze counter in WAIT state */
#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */
#define SPRN_MMCR1 798
-#define SPRN_MMCR2 769
+#define SPRN_MMCR2 785
#define SPRN_MMCRA 0x312
#define MMCRA_SDSYNC 0x80000000UL /* SDAR synced with SIAR */
#define MMCRA_SDAR_DCACHE_MISS 0x40000000UL
#define SPRN_PMC6 792
#define SPRN_PMC7 793
#define SPRN_PMC8 794
-#define SPRN_SIAR 780
-#define SPRN_SDAR 781
#define SPRN_SIER 784
#define SIER_SIPR 0x2000000 /* Sampled MSR_PR */
#define SIER_SIHV 0x1000000 /* Sampled MSR_HV */
#define SIER_SIAR_VALID 0x0400000 /* SIAR contents valid */
#define SIER_SDAR_VALID 0x0200000 /* SDAR contents valid */
+#define SPRN_SIAR 796
+#define SPRN_SDAR 797
#define SPRN_TACR 888
#define SPRN_TCSCR 889
#define SPRN_CSIGR 890
W(0xffff0000), W(0x003e0000), /* POWER6 */
W(0xffff0000), W(0x003f0000), /* POWER7 */
W(0xffff0000), W(0x004b0000), /* POWER8E */
+ W(0xffff0000), W(0x004c0000), /* POWER8NVL */
W(0xffff0000), W(0x004d0000), /* POWER8 */
W(0xffffffff), W(0x0f000004), /* all 2.07-compliant */
W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */
* must match by the macro below. Update the definition if
* the structure layout changes.
*/
-#define IBM_ARCH_VEC_NRCORES_OFFSET 125
+#define IBM_ARCH_VEC_NRCORES_OFFSET 133
W(NR_CPUS), /* number of cores supported */
0,
0,
#else
BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
- offsetof(struct thread_fp_state, fpr[32][0]));
+ offsetof(struct thread_fp_state, fpr[32]));
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.fp_state, 0, -1);
return 0;
#else
BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) !=
- offsetof(struct thread_fp_state, fpr[32][0]));
+ offsetof(struct thread_fp_state, fpr[32]));
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.fp_state, 0, -1);
}
}
/* This works for all page sizes, and for 256M and 1T segments */
- *ssize = hpte_v >> HPTE_V_SSIZE_SHIFT;
+ if (cpu_has_feature(CPU_FTR_ARCH_300))
+ *ssize = hpte_r >> HPTE_R_3_0_SSIZE_SHIFT;
+ else
+ *ssize = hpte_v >> HPTE_V_SSIZE_SHIFT;
+
shift = mmu_psize_defs[size].shift;
avpn = (HPTE_V_AVPN_VAL(hpte_v) & ~mmu_psize_defs[size].avpnm);
},
};
+/*
+ * 'R' and 'C' update notes:
+ * - Under pHyp or KVM, the updatepp path will not set C, thus it *will*
+ * create writeable HPTEs without C set, because the hcall H_PROTECT
+ * that we use in that case will not update C
+ * - The above is however not a problem, because we also don't do that
+ * fancy "no flush" variant of eviction and we use H_REMOVE which will
+ * do the right thing and thus we don't have the race I described earlier
+ *
+ * - Under bare metal, we do have the race, so we need R and C set
+ * - We make sure R is always set and never lost
+ * - C is _PAGE_DIRTY, and *should* always be set for a writeable mapping
+ */
unsigned long htab_convert_pte_flags(unsigned long pteflags)
{
unsigned long rflags = 0;
rflags |= 0x1;
}
/*
- * Always add "C" bit for perf. Memory coherence is always enabled
+ * We can't allow hardware to update hpte bits. Hence always
+ * set 'R' bit and set 'C' if it is a write fault
+ * Memory coherence is always enabled
*/
- rflags |= HPTE_R_C | HPTE_R_M;
+ rflags |= HPTE_R_R | HPTE_R_M;
+
+ if (pteflags & _PAGE_DIRTY)
+ rflags |= HPTE_R_C;
/*
* Add in WIG bits
*/
changed = !pmd_same(*(pmdp), entry);
if (changed) {
__ptep_set_access_flags(pmdp_ptep(pmdp), pmd_pte(entry));
- /*
- * Since we are not supporting SW TLB systems, we don't
- * have any thing similar to flush_tlb_page_nohash()
- */
+ flush_tlb_range(vma, address, address + HPAGE_PMD_SIZE);
}
return changed;
}
void __init radix__early_init_mmu(void)
{
unsigned long lpcr;
- /*
- * setup LPCR UPRT based on mmu_features
- */
- lpcr = mfspr(SPRN_LPCR);
- mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
#ifdef CONFIG_PPC_64K_PAGES
/* PAGE_SIZE mappings */
__pte_frag_size_shift = H_PTE_FRAG_SIZE_SHIFT;
radix_init_page_sizes();
- if (!firmware_has_feature(FW_FEATURE_LPAR))
+ if (!firmware_has_feature(FW_FEATURE_LPAR)) {
+ lpcr = mfspr(SPRN_LPCR);
+ mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
radix_init_partition_table();
+ }
radix_init_pgtable();
}
{
unsigned long lpcr;
/*
- * setup LPCR UPRT based on mmu_features
+ * update partition table control register and UPRT
*/
- lpcr = mfspr(SPRN_LPCR);
- mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
- /*
- * update partition table control register, 64 K size.
- */
- if (!firmware_has_feature(FW_FEATURE_LPAR))
+ if (!firmware_has_feature(FW_FEATURE_LPAR)) {
+ lpcr = mfspr(SPRN_LPCR);
+ mtspr(SPRN_LPCR, lpcr | LPCR_UPRT);
+
mtspr(SPRN_PTCR,
__pa(partition_tb) | (PATB_SIZE_SHIFT - 12));
+ }
}
void radix__setup_initial_memory_limit(phys_addr_t first_memblock_base,
*/
void radix__local_flush_tlb_mm(struct mm_struct *mm)
{
- unsigned int pid;
+ unsigned long pid;
preempt_disable();
pid = mm->context.id;
void radix___local_flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
unsigned long ap, int nid)
{
- unsigned int pid;
+ unsigned long pid;
preempt_disable();
pid = mm ? mm->context.id : 0;
void radix__flush_tlb_mm(struct mm_struct *mm)
{
- unsigned int pid;
+ unsigned long pid;
preempt_disable();
pid = mm->context.id;
void radix___flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr,
unsigned long ap, int nid)
{
- unsigned int pid;
+ unsigned long pid;
preempt_disable();
pid = mm ? mm->context.id : 0;
/* convenience wrappers around the common clk API */
static inline struct clk *mpc512x_clk_fixed(const char *name, int rate)
{
- return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+ return clk_register_fixed_rate(NULL, name, NULL, 0, rate);
}
static inline struct clk *mpc512x_clk_factor(
if (rc < 0)
goto out;
- skip = roundup(cprm->file->f_pos - total + sz, 4) - cprm->file->f_pos;
+ skip = roundup(cprm->pos - total + sz, 4) - cprm->pos;
if (!dump_skip(cprm, skip))
goto Eio;
out:
static int ibm_slot_error_detail;
static int ibm_get_config_addr_info;
static int ibm_get_config_addr_info2;
-static int ibm_configure_bridge;
static int ibm_configure_pe;
/*
ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
ibm_configure_pe = rtas_token("ibm,configure-pe");
- ibm_configure_bridge = rtas_token("ibm,configure-bridge");
+
+ /*
+ * ibm,configure-pe and ibm,configure-bridge have the same semantics,
+ * however ibm,configure-pe can be faster. If we can't find
+ * ibm,configure-pe then fall back to using ibm,configure-bridge.
+ */
+ if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE)
+ ibm_configure_pe = rtas_token("ibm,configure-bridge");
/*
* Necessary sanity check. We needn't check "get-config-addr-info"
(ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE &&
ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) ||
ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE ||
- (ibm_configure_pe == RTAS_UNKNOWN_SERVICE &&
- ibm_configure_bridge == RTAS_UNKNOWN_SERVICE)) {
+ ibm_configure_pe == RTAS_UNKNOWN_SERVICE) {
pr_info("EEH functionality not supported\n");
return -EINVAL;
}
{
int config_addr;
int ret;
+ /* Waiting 0.2s maximum before skipping configuration */
+ int max_wait = 200;
/* Figure out the PE address */
config_addr = pe->config_addr;
if (pe->addr)
config_addr = pe->addr;
- /* Use new configure-pe function, if supported */
- if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) {
+ while (max_wait > 0) {
ret = rtas_call(ibm_configure_pe, 3, 1, NULL,
config_addr, BUID_HI(pe->phb->buid),
BUID_LO(pe->phb->buid));
- } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) {
- ret = rtas_call(ibm_configure_bridge, 3, 1, NULL,
- config_addr, BUID_HI(pe->phb->buid),
- BUID_LO(pe->phb->buid));
- } else {
- return -EFAULT;
- }
- if (ret)
- pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
- __func__, pe->phb->global_number, pe->addr, ret);
+ if (!ret)
+ return ret;
+
+ /*
+ * If RTAS returns a delay value that's above 100ms, cut it
+ * down to 100ms in case firmware made a mistake. For more
+ * on how these delay values work see rtas_busy_delay_time
+ */
+ if (ret > RTAS_EXTENDED_DELAY_MIN+2 &&
+ ret <= RTAS_EXTENDED_DELAY_MAX)
+ ret = RTAS_EXTENDED_DELAY_MIN+2;
+
+ max_wait -= rtas_busy_delay_time(ret);
+
+ if (max_wait < 0)
+ break;
+
+ rtas_busy_delay(ret);
+ }
+ pr_warn("%s: Unable to configure bridge PHB#%d-PE#%x (%d)\n",
+ __func__, pe->phb->global_number, pe->addr, ret);
return ret;
}
dn = pci_device_to_OF_node(dev);
pdn = PCI_DN(dn);
buid = pdn->phb->buid;
- cfg_addr = (pdn->busno << 8) | pdn->devfn;
+ cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
ret = rtas_call(ddw_avail[0], 3, 5, (u32 *)query,
cfg_addr, BUID_HI(buid), BUID_LO(buid));
dn = pci_device_to_OF_node(dev);
pdn = PCI_DN(dn);
buid = pdn->phb->buid;
- cfg_addr = (pdn->busno << 8) | pdn->devfn;
+ cfg_addr = ((pdn->busno << 16) | (pdn->devfn << 8));
do {
/* extra outputs are LIOBN and dma-addr (hi, lo) */
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NUMA_BALANCING=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_PIDS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_CGROUP_PERF=y
+CONFIG_BLK_CGROUP=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
CONFIG_LIVEPATCH=y
-CONFIG_MARCH_Z196=y
CONFIG_TUNE_ZEC12=y
CONFIG_NR_CPUS=256
CONFIG_NUMA=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CLEANCACHE=y
+CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+CONFIG_MEM_SOFT_DIRTY=y
+CONFIG_ZPOOL=m
+CONFIG_ZBUD=m
+CONFIG_ZSMALLOC=m
+CONFIG_ZSMALLOC_STAT=y
+CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_PCI=y
CONFIG_PCI_DEBUG=y
CONFIG_HOTPLUG_PCI=y
CONFIG_RAW_DRIVER=m
CONFIG_HANGCHECK_TIMER=m
CONFIG_TN3270_FS=y
+# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_SOFT_WATCHDOG=m
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=1024
CONFIG_READABLE_ASM=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_SLUB_STATS=y
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_VM_VMACACHE=y
CONFIG_DEBUG_VM_RB=y
+CONFIG_DEBUG_VM_PGFLAGS=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
CONFIG_DEBUG_PER_CPU_MAPS=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_HUNG_TASK=y
+CONFIG_WQ_WATCHDOG=y
CONFIG_PANIC_ON_OOPS=y
+CONFIG_DEBUG_TIMEKEEPING=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_UPROBE_EVENT=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_TRACE_ENUM_MAP_FILE=y
CONFIG_LKDTM=m
CONFIG_TEST_LIST_SORT=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_TEST_KSTRTOX=y
CONFIG_DMA_API_DEBUG=y
CONFIG_TEST_BPF=m
-# CONFIG_STRICT_DEVMEM is not set
CONFIG_S390_PTDUMP=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_SECURITY=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_DES_S390=m
CONFIG_CRYPTO_AES_S390=m
CONFIG_CRYPTO_GHASH_S390=m
-CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NUMA_BALANCING=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_PIDS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
-CONFIG_BLK_CGROUP=y
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
-CONFIG_MARCH_Z196=y
CONFIG_TUNE_ZEC12=y
CONFIG_NR_CPUS=256
CONFIG_NUMA=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CLEANCACHE=y
+CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+CONFIG_ZSWAP=y
+CONFIG_ZBUD=m
+CONFIG_ZSMALLOC=m
+CONFIG_ZSMALLOC_STAT=y
+CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_PCI=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_S390=y
CONFIG_DLM=m
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_GDB_SCRIPTS=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_KPROBE_EVENT is not set
+CONFIG_TRACE_ENUM_MAP_FILE=y
CONFIG_LKDTM=m
CONFIG_RBTREE_TEST=m
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_BPF=m
-# CONFIG_STRICT_DEVMEM is not set
CONFIG_S390_PTDUMP=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_SECURITY=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=y
-CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_DES_S390=m
CONFIG_CRYPTO_AES_S390=m
CONFIG_CRYPTO_GHASH_S390=m
-CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_IKCONFIG_PROC=y
CONFIG_NUMA_BALANCING=y
# CONFIG_NUMA_BALANCING_DEFAULT_ENABLED is not set
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_PIDS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
-CONFIG_BLK_CGROUP=y
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_CFQ_GROUP_IOSCHED=y
CONFIG_DEFAULT_DEADLINE=y
CONFIG_LIVEPATCH=y
-CONFIG_MARCH_Z196=y
CONFIG_TUNE_ZEC12=y
CONFIG_NR_CPUS=512
CONFIG_NUMA=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CLEANCACHE=y
+CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+CONFIG_ZSWAP=y
+CONFIG_ZBUD=m
+CONFIG_ZSMALLOC=m
+CONFIG_ZSMALLOC_STAT=y
+CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_PCI=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_S390=y
CONFIG_RAW_DRIVER=m
CONFIG_HANGCHECK_TIMER=m
CONFIG_TN3270_FS=y
+# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_SOFT_WATCHDOG=m
CONFIG_DLM=m
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_GDB_SCRIPTS=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_UNUSED_SYMBOLS=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_UPROBE_EVENT=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_TRACE_ENUM_MAP_FILE=y
CONFIG_LKDTM=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_TEST_BPF=m
-# CONFIG_STRICT_DEVMEM is not set
CONFIG_S390_PTDUMP=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_SECURITY=y
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_ZLIB=y
-CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_DES_S390=m
CONFIG_CRYPTO_AES_S390=m
CONFIG_CRYPTO_GHASH_S390=m
-CONFIG_ASYMMETRIC_KEY_TYPE=m
+CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
# CONFIG_SWAP is not set
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_DEFAULT_DEADLINE=y
-CONFIG_MARCH_Z196=y
CONFIG_TUNE_ZEC12=y
# CONFIG_COMPAT is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_DEBUG is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_FTRACE is not set
-# CONFIG_STRICT_DEVMEM is not set
# CONFIG_PFAULT is not set
# CONFIG_S390_HYPFS_FS is not set
# CONFIG_VIRTUALIZATION is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
+CONFIG_USELIB=y
CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
+CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_PIDS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_CPUACCT=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_CGROUP_PERF=y
+CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_NAMESPACES=y
CONFIG_USER_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_IBM_PARTITION=y
CONFIG_DEFAULT_DEADLINE=y
CONFIG_LIVEPATCH=y
-CONFIG_MARCH_Z196=y
CONFIG_NR_CPUS=256
CONFIG_NUMA=y
CONFIG_HZ_100=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_KSM=y
CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CLEANCACHE=y
+CONFIG_FRONTSWAP=y
+CONFIG_CMA=y
+CONFIG_ZSWAP=y
+CONFIG_ZBUD=m
+CONFIG_ZSMALLOC=m
+CONFIG_ZSMALLOC_STAT=y
+CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_CRASH_DUMP=y
CONFIG_BINFMT_MISC=m
CONFIG_HIBERNATION=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
-# CONFIG_INET_LRO is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_VLAN_8021Q=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_INFO_DWARF4=y
+CONFIG_GDB_SCRIPTS=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_PI_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_TRACE=y
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
-CONFIG_TRACER_SNAPSHOT=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_UPROBE_EVENT=y
+CONFIG_FUNCTION_PROFILER=y
+CONFIG_TRACE_ENUM_MAP_FILE=y
CONFIG_KPROBES_SANITY_TEST=y
-# CONFIG_STRICT_DEVMEM is not set
CONFIG_S390_PTDUMP=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_ZLIB=m
-CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
CONFIG_CRYPTO_ANSI_CPRNG=m
report_user_fault(regs, SIGSEGV, 1);
si.si_signo = SIGSEGV;
+ si.si_errno = 0;
si.si_code = si_code;
si.si_addr = (void __user *)(regs->int_parm_long & __FAIL_ADDR_MASK);
force_sig_info(SIGSEGV, &si, current);
* | | |
* +---------------+ |
* | 8 byte skbp | |
- * R15+170 -> +---------------+ |
+ * R15+176 -> +---------------+ |
* | 8 byte hlen | |
* R15+168 -> +---------------+ |
* | 4 byte align | |
#define STK_OFF (STK_SPACE - STK_160_UNUSED)
#define STK_OFF_TMP 160 /* Offset of tmp buffer on stack */
#define STK_OFF_HLEN 168 /* Offset of SKB header length on stack */
-#define STK_OFF_SKBP 170 /* Offset of SKB pointer on stack */
+#define STK_OFF_SKBP 176 /* Offset of SKB pointer on stack */
#define STK_OFF_R6 (160 - 11 * 8) /* Offset of r6 on stack */
#define STK_OFF_TCCNT (160 - 12 * 8) /* Offset of tail_call_cnt on stack */
int labels[1]; /* Labels for local jumps */
};
-#define BPF_SIZE_MAX 0x7ffff /* Max size for program (20 bit signed displ) */
+#define BPF_SIZE_MAX 0xffff /* Max size for program (16 bit branches) */
#define SEEN_SKB 1 /* skb access */
#define SEEN_MEM 2 /* use mem[] for temporary storage */
emit_load_skb_data_hlen(jit);
if (jit->seen & SEEN_SKB_CHANGE)
/* stg %b1,ST_OFF_SKBP(%r0,%r15) */
- EMIT6_DISP_LH(0xe3000000, 0x0024, REG_W1, REG_0, REG_15,
+ EMIT6_DISP_LH(0xe3000000, 0x0024, BPF_REG_1, REG_0, REG_15,
STK_OFF_SKBP);
}
#define PTREGS_OFF (STACK_BIAS + STACKFRAME_SZ)
+#define RTRAP_PSTATE (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_IE)
+#define RTRAP_PSTATE_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV)
+#define RTRAP_PSTATE_AG_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_AG)
+
#define __CHEETAH_ID 0x003e0014
#define __JALAPENO_ID 0x003e0016
#define __SERRANO_ID 0x003e0022
restored; \
nop; nop; nop; nop; nop; nop; \
nop; nop; nop; nop; nop; \
- ba,a,pt %xcc, user_rtt_fill_fixup; \
- ba,a,pt %xcc, user_rtt_fill_fixup; \
+ ba,a,pt %xcc, user_rtt_fill_fixup_dax; \
+ ba,a,pt %xcc, user_rtt_fill_fixup_mna; \
ba,a,pt %xcc, user_rtt_fill_fixup;
restored; \
nop; nop; nop; nop; nop; \
nop; nop; nop; \
- ba,a,pt %xcc, user_rtt_fill_fixup; \
- ba,a,pt %xcc, user_rtt_fill_fixup; \
+ ba,a,pt %xcc, user_rtt_fill_fixup_dax; \
+ ba,a,pt %xcc, user_rtt_fill_fixup_mna; \
ba,a,pt %xcc, user_rtt_fill_fixup;
CFLAGS_REMOVE_pcr.o := -pg
endif
+obj-$(CONFIG_SPARC64) += urtt_fill.o
obj-$(CONFIG_SPARC32) += entry.o wof.o wuf.o
obj-$(CONFIG_SPARC32) += etrap_32.o
obj-$(CONFIG_SPARC32) += rtrap_32.o
#include <asm/visasm.h>
#include <asm/processor.h>
-#define RTRAP_PSTATE (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_IE)
-#define RTRAP_PSTATE_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV)
-#define RTRAP_PSTATE_AG_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_AG)
-
#ifdef CONFIG_CONTEXT_TRACKING
# define SCHEDULE_USER schedule_user
#else
wrpr %g1, %cwp
ba,a,pt %xcc, user_rtt_fill_64bit
-user_rtt_fill_fixup:
- rdpr %cwp, %g1
- add %g1, 1, %g1
- wrpr %g1, 0x0, %cwp
-
- rdpr %wstate, %g2
- sll %g2, 3, %g2
- wrpr %g2, 0x0, %wstate
-
- /* We know %canrestore and %otherwin are both zero. */
-
- sethi %hi(sparc64_kern_pri_context), %g2
- ldx [%g2 + %lo(sparc64_kern_pri_context)], %g2
- mov PRIMARY_CONTEXT, %g1
-
-661: stxa %g2, [%g1] ASI_DMMU
- .section .sun4v_1insn_patch, "ax"
- .word 661b
- stxa %g2, [%g1] ASI_MMU
- .previous
-
- sethi %hi(KERNBASE), %g1
- flush %g1
+user_rtt_fill_fixup_dax:
+ ba,pt %xcc, user_rtt_fill_fixup_common
+ mov 1, %g3
- or %g4, FAULT_CODE_WINFIXUP, %g4
- stb %g4, [%g6 + TI_FAULT_CODE]
- stx %g5, [%g6 + TI_FAULT_ADDR]
+user_rtt_fill_fixup_mna:
+ ba,pt %xcc, user_rtt_fill_fixup_common
+ mov 2, %g3
- mov %g6, %l1
- wrpr %g0, 0x0, %tl
-
-661: nop
- .section .sun4v_1insn_patch, "ax"
- .word 661b
- SET_GL(0)
- .previous
-
- wrpr %g0, RTRAP_PSTATE, %pstate
-
- mov %l1, %g6
- ldx [%g6 + TI_TASK], %g4
- LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3)
- call do_sparc64_fault
- add %sp, PTREGS_OFF, %o0
- ba,pt %xcc, rtrap
- nop
+user_rtt_fill_fixup:
+ ba,pt %xcc, user_rtt_fill_fixup_common
+ clr %g3
user_rtt_pre_restore:
add %g1, 1, %g1
return 0;
}
+/* Checks if the fp is valid. We always build signal frames which are
+ * 16-byte aligned, therefore we can always enforce that the restore
+ * frame has that property as well.
+ */
+static bool invalid_frame_pointer(void __user *fp, int fplen)
+{
+ if ((((unsigned long) fp) & 15) ||
+ ((unsigned long)fp) > 0x100000000ULL - fplen)
+ return true;
+ return false;
+}
+
void do_sigreturn32(struct pt_regs *regs)
{
struct signal_frame32 __user *sf;
compat_uptr_t fpu_save;
compat_uptr_t rwin_save;
- unsigned int psr;
+ unsigned int psr, ufp;
unsigned int pc, npc;
sigset_t set;
compat_sigset_t seta;
sf = (struct signal_frame32 __user *) regs->u_regs[UREG_FP];
/* 1. Make sure we are not getting garbage from the user */
- if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) ||
- (((unsigned long) sf) & 3))
+ if (invalid_frame_pointer(sf, sizeof(*sf)))
+ goto segv;
+
+ if (get_user(ufp, &sf->info.si_regs.u_regs[UREG_FP]))
+ goto segv;
+
+ if (ufp & 0x7)
goto segv;
- if (get_user(pc, &sf->info.si_regs.pc) ||
+ if (__get_user(pc, &sf->info.si_regs.pc) ||
__get_user(npc, &sf->info.si_regs.npc))
goto segv;
asmlinkage void do_rt_sigreturn32(struct pt_regs *regs)
{
struct rt_signal_frame32 __user *sf;
- unsigned int psr, pc, npc;
+ unsigned int psr, pc, npc, ufp;
compat_uptr_t fpu_save;
compat_uptr_t rwin_save;
sigset_t set;
sf = (struct rt_signal_frame32 __user *) regs->u_regs[UREG_FP];
/* 1. Make sure we are not getting garbage from the user */
- if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) ||
- (((unsigned long) sf) & 3))
+ if (invalid_frame_pointer(sf, sizeof(*sf)))
goto segv;
- if (get_user(pc, &sf->regs.pc) ||
+ if (get_user(ufp, &sf->regs.u_regs[UREG_FP]))
+ goto segv;
+
+ if (ufp & 0x7)
+ goto segv;
+
+ if (__get_user(pc, &sf->regs.pc) ||
__get_user(npc, &sf->regs.npc))
goto segv;
force_sig(SIGSEGV, current);
}
-/* Checks if the fp is valid */
-static int invalid_frame_pointer(void __user *fp, int fplen)
-{
- if ((((unsigned long) fp) & 7) || ((unsigned long)fp) > 0x100000000ULL - fplen)
- return 1;
- return 0;
-}
-
static void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize)
{
unsigned long sp;
#define SF_ALIGNEDSZ (((sizeof(struct signal_frame) + 7) & (~7)))
#define RT_ALIGNEDSZ (((sizeof(struct rt_signal_frame) + 7) & (~7)))
+/* Checks if the fp is valid. We always build signal frames which are
+ * 16-byte aligned, therefore we can always enforce that the restore
+ * frame has that property as well.
+ */
+static inline bool invalid_frame_pointer(void __user *fp, int fplen)
+{
+ if ((((unsigned long) fp) & 15) || !__access_ok((unsigned long)fp, fplen))
+ return true;
+
+ return false;
+}
+
asmlinkage void do_sigreturn(struct pt_regs *regs)
{
+ unsigned long up_psr, pc, npc, ufp;
struct signal_frame __user *sf;
- unsigned long up_psr, pc, npc;
sigset_t set;
__siginfo_fpu_t __user *fpu_save;
__siginfo_rwin_t __user *rwin_save;
sf = (struct signal_frame __user *) regs->u_regs[UREG_FP];
/* 1. Make sure we are not getting garbage from the user */
- if (!access_ok(VERIFY_READ, sf, sizeof(*sf)))
+ if (!invalid_frame_pointer(sf, sizeof(*sf)))
+ goto segv_and_exit;
+
+ if (get_user(ufp, &sf->info.si_regs.u_regs[UREG_FP]))
goto segv_and_exit;
- if (((unsigned long) sf) & 3)
+ if (ufp & 0x7)
goto segv_and_exit;
err = __get_user(pc, &sf->info.si_regs.pc);
asmlinkage void do_rt_sigreturn(struct pt_regs *regs)
{
struct rt_signal_frame __user *sf;
- unsigned int psr, pc, npc;
+ unsigned int psr, pc, npc, ufp;
__siginfo_fpu_t __user *fpu_save;
__siginfo_rwin_t __user *rwin_save;
sigset_t set;
synchronize_user_stack();
sf = (struct rt_signal_frame __user *) regs->u_regs[UREG_FP];
- if (!access_ok(VERIFY_READ, sf, sizeof(*sf)) ||
- (((unsigned long) sf) & 0x03))
+ if (!invalid_frame_pointer(sf, sizeof(*sf)))
+ goto segv;
+
+ if (get_user(ufp, &sf->regs.u_regs[UREG_FP]))
+ goto segv;
+
+ if (ufp & 0x7)
goto segv;
err = __get_user(pc, &sf->regs.pc);
force_sig(SIGSEGV, current);
}
-/* Checks if the fp is valid */
-static inline int invalid_frame_pointer(void __user *fp, int fplen)
-{
- if ((((unsigned long) fp) & 7) || !__access_ok((unsigned long)fp, fplen))
- return 1;
-
- return 0;
-}
-
static inline void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize)
{
unsigned long sp = regs->u_regs[UREG_FP];
goto out;
}
+/* Checks if the fp is valid. We always build rt signal frames which
+ * are 16-byte aligned, therefore we can always enforce that the
+ * restore frame has that property as well.
+ */
+static bool invalid_frame_pointer(void __user *fp)
+{
+ if (((unsigned long) fp) & 15)
+ return true;
+ return false;
+}
+
struct rt_signal_frame {
struct sparc_stackf ss;
siginfo_t info;
void do_rt_sigreturn(struct pt_regs *regs)
{
+ unsigned long tpc, tnpc, tstate, ufp;
struct rt_signal_frame __user *sf;
- unsigned long tpc, tnpc, tstate;
__siginfo_fpu_t __user *fpu_save;
__siginfo_rwin_t __user *rwin_save;
sigset_t set;
(regs->u_regs [UREG_FP] + STACK_BIAS);
/* 1. Make sure we are not getting garbage from the user */
- if (((unsigned long) sf) & 3)
+ if (invalid_frame_pointer(sf))
+ goto segv;
+
+ if (get_user(ufp, &sf->regs.u_regs[UREG_FP]))
goto segv;
- err = get_user(tpc, &sf->regs.tpc);
+ if ((ufp + STACK_BIAS) & 0x7)
+ goto segv;
+
+ err = __get_user(tpc, &sf->regs.tpc);
err |= __get_user(tnpc, &sf->regs.tnpc);
if (test_thread_flag(TIF_32BIT)) {
tpc &= 0xffffffff;
force_sig(SIGSEGV, current);
}
-/* Checks if the fp is valid */
-static int invalid_frame_pointer(void __user *fp)
-{
- if (((unsigned long) fp) & 15)
- return 1;
- return 0;
-}
-
static inline void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize)
{
unsigned long sp = regs->u_regs[UREG_FP] + STACK_BIAS;
int restore_fpu_state(struct pt_regs *regs, __siginfo_fpu_t __user *fpu)
{
int err;
+
+ if (((unsigned long) fpu) & 3)
+ return -EFAULT;
+
#ifdef CONFIG_SMP
if (test_tsk_thread_flag(current, TIF_USEDFPU))
regs->psr &= ~PSR_EF;
struct thread_info *t = current_thread_info();
int i, wsaved, err;
- __get_user(wsaved, &rp->wsaved);
+ if (((unsigned long) rp) & 3)
+ return -EFAULT;
+
+ get_user(wsaved, &rp->wsaved);
if (wsaved > NSWINS)
return -EFAULT;
unsigned long fprs;
int err;
- err = __get_user(fprs, &fpu->si_fprs);
+ if (((unsigned long) fpu) & 7)
+ return -EFAULT;
+
+ err = get_user(fprs, &fpu->si_fprs);
fprs_write(0);
regs->tstate &= ~TSTATE_PEF;
if (fprs & FPRS_DL)
struct thread_info *t = current_thread_info();
int i, wsaved, err;
- __get_user(wsaved, &rp->wsaved);
+ if (((unsigned long) rp) & 7)
+ return -EFAULT;
+
+ get_user(wsaved, &rp->wsaved);
if (wsaved > NSWINS)
return -EFAULT;
--- /dev/null
+#include <asm/thread_info.h>
+#include <asm/trap_block.h>
+#include <asm/spitfire.h>
+#include <asm/ptrace.h>
+#include <asm/head.h>
+
+ .text
+ .align 8
+ .globl user_rtt_fill_fixup_common
+user_rtt_fill_fixup_common:
+ rdpr %cwp, %g1
+ add %g1, 1, %g1
+ wrpr %g1, 0x0, %cwp
+
+ rdpr %wstate, %g2
+ sll %g2, 3, %g2
+ wrpr %g2, 0x0, %wstate
+
+ /* We know %canrestore and %otherwin are both zero. */
+
+ sethi %hi(sparc64_kern_pri_context), %g2
+ ldx [%g2 + %lo(sparc64_kern_pri_context)], %g2
+ mov PRIMARY_CONTEXT, %g1
+
+661: stxa %g2, [%g1] ASI_DMMU
+ .section .sun4v_1insn_patch, "ax"
+ .word 661b
+ stxa %g2, [%g1] ASI_MMU
+ .previous
+
+ sethi %hi(KERNBASE), %g1
+ flush %g1
+
+ mov %g4, %l4
+ mov %g5, %l5
+ brnz,pn %g3, 1f
+ mov %g3, %l3
+
+ or %g4, FAULT_CODE_WINFIXUP, %g4
+ stb %g4, [%g6 + TI_FAULT_CODE]
+ stx %g5, [%g6 + TI_FAULT_ADDR]
+1:
+ mov %g6, %l1
+ wrpr %g0, 0x0, %tl
+
+661: nop
+ .section .sun4v_1insn_patch, "ax"
+ .word 661b
+ SET_GL(0)
+ .previous
+
+ wrpr %g0, RTRAP_PSTATE, %pstate
+
+ mov %l1, %g6
+ ldx [%g6 + TI_TASK], %g4
+ LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3)
+
+ brnz,pn %l3, 1f
+ nop
+
+ call do_sparc64_fault
+ add %sp, PTREGS_OFF, %o0
+ ba,pt %xcc, rtrap
+ nop
+
+1: cmp %g3, 2
+ bne,pn %xcc, 2f
+ nop
+
+ sethi %hi(tlb_type), %g1
+ lduw [%g1 + %lo(tlb_type)], %g1
+ cmp %g1, 3
+ bne,pt %icc, 1f
+ add %sp, PTREGS_OFF, %o0
+ mov %l4, %o2
+ call sun4v_do_mna
+ mov %l5, %o1
+ ba,a,pt %xcc, rtrap
+1: mov %l4, %o1
+ mov %l5, %o2
+ call mem_address_unaligned
+ nop
+ ba,a,pt %xcc, rtrap
+
+2: sethi %hi(tlb_type), %g1
+ mov %l4, %o1
+ lduw [%g1 + %lo(tlb_type)], %g1
+ mov %l5, %o2
+ cmp %g1, 3
+ bne,pt %icc, 1f
+ add %sp, PTREGS_OFF, %o0
+ call sun4v_data_access_exception
+ nop
+ ba,a,pt %xcc, rtrap
+
+1: call spitfire_data_access_exception
+ nop
+ ba,a,pt %xcc, rtrap
* the Data-TLB for huge pages.
*/
if (tlb_type == cheetah_plus) {
+ bool need_context_reload = false;
unsigned long ctx;
- spin_lock(&ctx_alloc_lock);
+ spin_lock_irq(&ctx_alloc_lock);
ctx = mm->context.sparc64_ctx_val;
ctx &= ~CTX_PGSZ_MASK;
ctx |= CTX_PGSZ_BASE << CTX_PGSZ0_SHIFT;
* also executing in this address space.
*/
mm->context.sparc64_ctx_val = ctx;
- on_each_cpu(context_reload, mm, 0);
+ need_context_reload = true;
}
- spin_unlock(&ctx_alloc_lock);
+ spin_unlock_irq(&ctx_alloc_lock);
+
+ if (need_context_reload)
+ on_each_cpu(context_reload, mm, 0);
}
}
#endif
for i in lib lib64 share end ; do \
if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
+ if [ -f /usr/$$i/syslinux/ldlinux.c32 ]; then \
+ cp /usr/$$i/syslinux/ldlinux.c32 $(obj)/isoimage ; \
+ fi ; \
break ; \
fi ; \
if [ $$i = end ] ; then exit 1 ; fi ; \
int i;
for (i = 0; i < rapl_pmus->maxpkg; i++)
- kfree(rapl_pmus->pmus + i);
+ kfree(rapl_pmus->pmus[i]);
kfree(rapl_pmus);
}
.format_group = &hswep_uncore_cbox_format_group,
};
-static struct intel_uncore_type bdx_uncore_sbox = {
- .name = "sbox",
- .num_counters = 4,
- .num_boxes = 4,
- .perf_ctr_bits = 48,
- .event_ctl = HSWEP_S0_MSR_PMON_CTL0,
- .perf_ctr = HSWEP_S0_MSR_PMON_CTR0,
- .event_mask = HSWEP_S_MSR_PMON_RAW_EVENT_MASK,
- .box_ctl = HSWEP_S0_MSR_PMON_BOX_CTL,
- .msr_offset = HSWEP_SBOX_MSR_OFFSET,
- .ops = &hswep_uncore_sbox_msr_ops,
- .format_group = &hswep_uncore_sbox_format_group,
-};
-
-#define BDX_MSR_UNCORE_SBOX 3
-
static struct intel_uncore_type *bdx_msr_uncores[] = {
&bdx_uncore_ubox,
&bdx_uncore_cbox,
&hswep_uncore_pcu,
- &bdx_uncore_sbox,
NULL,
};
if (bdx_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores)
bdx_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores;
uncore_msr_uncores = bdx_msr_uncores;
-
- /* BDX-DE doesn't have SBOX */
- if (boot_cpu_data.x86_model == 86)
- uncore_msr_uncores[BDX_MSR_UNCORE_SBOX] = NULL;
}
static struct intel_uncore_type bdx_uncore_ha = {
--- /dev/null
+#ifndef _ASM_X86_INTEL_FAMILY_H
+#define _ASM_X86_INTEL_FAMILY_H
+
+/*
+ * "Big Core" Processors (Branded as Core, Xeon, etc...)
+ *
+ * The "_X" parts are generally the EP and EX Xeons, or the
+ * "Extreme" ones, like Broadwell-E.
+ *
+ * Things ending in "2" are usually because we have no better
+ * name for them. There's no processor called "WESTMERE2".
+ */
+
+#define INTEL_FAM6_CORE_YONAH 0x0E
+#define INTEL_FAM6_CORE2_MEROM 0x0F
+#define INTEL_FAM6_CORE2_MEROM_L 0x16
+#define INTEL_FAM6_CORE2_PENRYN 0x17
+#define INTEL_FAM6_CORE2_DUNNINGTON 0x1D
+
+#define INTEL_FAM6_NEHALEM 0x1E
+#define INTEL_FAM6_NEHALEM_EP 0x1A
+#define INTEL_FAM6_NEHALEM_EX 0x2E
+#define INTEL_FAM6_WESTMERE 0x25
+#define INTEL_FAM6_WESTMERE2 0x1F
+#define INTEL_FAM6_WESTMERE_EP 0x2C
+#define INTEL_FAM6_WESTMERE_EX 0x2F
+
+#define INTEL_FAM6_SANDYBRIDGE 0x2A
+#define INTEL_FAM6_SANDYBRIDGE_X 0x2D
+#define INTEL_FAM6_IVYBRIDGE 0x3A
+#define INTEL_FAM6_IVYBRIDGE_X 0x3E
+
+#define INTEL_FAM6_HASWELL_CORE 0x3C
+#define INTEL_FAM6_HASWELL_X 0x3F
+#define INTEL_FAM6_HASWELL_ULT 0x45
+#define INTEL_FAM6_HASWELL_GT3E 0x46
+
+#define INTEL_FAM6_BROADWELL_CORE 0x3D
+#define INTEL_FAM6_BROADWELL_XEON_D 0x56
+#define INTEL_FAM6_BROADWELL_GT3E 0x47
+#define INTEL_FAM6_BROADWELL_X 0x4F
+
+#define INTEL_FAM6_SKYLAKE_MOBILE 0x4E
+#define INTEL_FAM6_SKYLAKE_DESKTOP 0x5E
+#define INTEL_FAM6_SKYLAKE_X 0x55
+#define INTEL_FAM6_KABYLAKE_MOBILE 0x8E
+#define INTEL_FAM6_KABYLAKE_DESKTOP 0x9E
+
+/* "Small Core" Processors (Atom) */
+
+#define INTEL_FAM6_ATOM_PINEVIEW 0x1C
+#define INTEL_FAM6_ATOM_LINCROFT 0x26
+#define INTEL_FAM6_ATOM_PENWELL 0x27
+#define INTEL_FAM6_ATOM_CLOVERVIEW 0x35
+#define INTEL_FAM6_ATOM_CEDARVIEW 0x36
+#define INTEL_FAM6_ATOM_SILVERMONT1 0x37 /* BayTrail/BYT / Valleyview */
+#define INTEL_FAM6_ATOM_SILVERMONT2 0x4D /* Avaton/Rangely */
+#define INTEL_FAM6_ATOM_AIRMONT 0x4C /* CherryTrail / Braswell */
+#define INTEL_FAM6_ATOM_MERRIFIELD1 0x4A /* Tangier */
+#define INTEL_FAM6_ATOM_MERRIFIELD2 0x5A /* Annidale */
+#define INTEL_FAM6_ATOM_GOLDMONT 0x5C
+#define INTEL_FAM6_ATOM_DENVERTON 0x5F /* Goldmont Microserver */
+
+/* Xeon Phi */
+
+#define INTEL_FAM6_XEON_PHI_KNL 0x57 /* Knights Landing */
+
+#endif /* _ASM_X86_INTEL_FAMILY_H */
"2:\n"
_ASM_EXTABLE_HANDLE(1b, 2b, ex_handler_wrmsr_unsafe)
: : "c" (msr), "a"(low), "d" (high) : "memory");
- if (msr_tracepoint_active(__tracepoint_read_msr))
+ if (msr_tracepoint_active(__tracepoint_write_msr))
do_trace_write_msr(msr, ((u64)high << 32 | low), 0);
}
: "c" (msr), "0" (low), "d" (high),
[fault] "i" (-EIO)
: "memory");
- if (msr_tracepoint_active(__tracepoint_read_msr))
+ if (msr_tracepoint_active(__tracepoint_write_msr))
do_trace_write_msr(msr, ((u64)high << 32 | low), err);
return err;
}
res[num].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i);
mem += IOAPIC_RESOURCE_NAME_SIZE;
+ ioapics[i].iomem_res = &res[num];
num++;
- ioapics[i].iomem_res = res;
}
ioapic_resources = res;
u64 value;
/* re-enable TopologyExtensions if switched off by BIOS */
- if ((c->x86_model >= 0x10) && (c->x86_model <= 0x1f) &&
+ if ((c->x86_model >= 0x10) && (c->x86_model <= 0x6f) &&
!cpu_has(c, X86_FEATURE_TOPOEXT)) {
if (msr_set_bit(0xc0011005, 54) > 0) {
rdmsrl(0xc0011005, value);
if (value & BIT_64(54)) {
set_cpu_cap(c, X86_FEATURE_TOPOEXT);
- pr_info(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n");
+ pr_info_once(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n");
}
}
}
local_irq_disable();
}
+/*
+ * In IST context, we explicitly disable preemption. This serves two
+ * purposes: it makes it much less likely that we would accidentally
+ * schedule in IST context and it will force a warning if we somehow
+ * manage to schedule by accident.
+ */
void ist_enter(struct pt_regs *regs)
{
if (user_mode(regs)) {
rcu_nmi_enter();
}
- /*
- * We are atomic because we're on the IST stack; or we're on
- * x86_32, in which case we still shouldn't schedule; or we're
- * on x86_64 and entered from user mode, in which case we're
- * still atomic unless ist_begin_non_atomic is called.
- */
- preempt_count_add(HARDIRQ_OFFSET);
+ preempt_disable();
/* This code is a bit fragile. Test it. */
RCU_LOCKDEP_WARN(!rcu_is_watching(), "ist_enter didn't work");
void ist_exit(struct pt_regs *regs)
{
- preempt_count_sub(HARDIRQ_OFFSET);
+ preempt_enable_no_resched();
if (!user_mode(regs))
rcu_nmi_exit();
BUG_ON((unsigned long)(current_top_of_stack() -
current_stack_pointer()) >= THREAD_SIZE);
- preempt_count_sub(HARDIRQ_OFFSET);
+ preempt_enable_no_resched();
}
/**
*/
void ist_end_non_atomic(void)
{
- preempt_count_add(HARDIRQ_OFFSET);
+ preempt_disable();
}
static nokprobe_inline int
struct kvm_cpuid_entry __user *entries)
{
int r, i;
- struct kvm_cpuid_entry *cpuid_entries;
+ struct kvm_cpuid_entry *cpuid_entries = NULL;
r = -E2BIG;
if (cpuid->nent > KVM_MAX_CPUID_ENTRIES)
goto out;
r = -ENOMEM;
- cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry) * cpuid->nent);
- if (!cpuid_entries)
- goto out;
- r = -EFAULT;
- if (copy_from_user(cpuid_entries, entries,
- cpuid->nent * sizeof(struct kvm_cpuid_entry)))
- goto out_free;
+ if (cpuid->nent) {
+ cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry) *
+ cpuid->nent);
+ if (!cpuid_entries)
+ goto out;
+ r = -EFAULT;
+ if (copy_from_user(cpuid_entries, entries,
+ cpuid->nent * sizeof(struct kvm_cpuid_entry)))
+ goto out;
+ }
for (i = 0; i < cpuid->nent; i++) {
vcpu->arch.cpuid_entries[i].function = cpuid_entries[i].function;
vcpu->arch.cpuid_entries[i].eax = cpuid_entries[i].eax;
kvm_x86_ops->cpuid_update(vcpu);
r = kvm_update_cpuid(vcpu);
-out_free:
- vfree(cpuid_entries);
out:
+ vfree(cpuid_entries);
return r;
}
#ifdef CONFIG_X86_64
static void __set_spte(u64 *sptep, u64 spte)
{
- *sptep = spte;
+ WRITE_ONCE(*sptep, spte);
}
static void __update_clear_spte_fast(u64 *sptep, u64 spte)
{
- *sptep = spte;
+ WRITE_ONCE(*sptep, spte);
}
static u64 __update_clear_spte_slow(u64 *sptep, u64 spte)
*/
smp_wmb();
- ssptep->spte_low = sspte.spte_low;
+ WRITE_ONCE(ssptep->spte_low, sspte.spte_low);
}
static void __update_clear_spte_fast(u64 *sptep, u64 spte)
ssptep = (union split_spte *)sptep;
sspte = (union split_spte)spte;
- ssptep->spte_low = sspte.spte_low;
+ WRITE_ONCE(ssptep->spte_low, sspte.spte_low);
/*
* If we map the spte from present to nonpresent, we should clear
case MSR_AMD64_NB_CFG:
case MSR_FAM10H_MMIO_CONF_BASE:
case MSR_AMD64_BU_CFG2:
+ case MSR_IA32_PERF_CTL:
msr_info->data = 0;
break;
case MSR_K7_EVNTSEL0 ... MSR_K7_EVNTSEL3:
| KVM_VCPUEVENT_VALID_SMM))
return -EINVAL;
+ if (events->exception.injected &&
+ (events->exception.nr > 31 || events->exception.nr == NMI_VECTOR))
+ return -EINVAL;
+
process_nmi(vcpu);
vcpu->arch.exception.pending = events->exception.injected;
vcpu->arch.exception.nr = events->exception.nr;
if (dbgregs->flags)
return -EINVAL;
+ if (dbgregs->dr6 & ~0xffffffffull)
+ return -EINVAL;
+ if (dbgregs->dr7 & ~0xffffffffull)
+ return -EINVAL;
+
memcpy(vcpu->arch.db, dbgregs->db, sizeof(vcpu->arch.db));
kvm_update_dr0123(vcpu);
vcpu->arch.dr6 = dbgregs->dr6;
slot = id_to_memslot(slots, id);
if (size) {
- if (WARN_ON(slot->npages))
+ if (slot->npages)
return -EEXIST;
/*
ret = submit_bio_wait(type, bio);
if (ret == -EOPNOTSUPP)
ret = 0;
+ bio_put(bio);
}
blk_finish_plug(&plug);
}
}
- if (bio)
+ if (bio) {
ret = submit_bio_wait(REQ_WRITE | REQ_WRITE_SAME, bio);
+ bio_put(bio);
+ }
return ret != -EOPNOTSUPP ? ret : 0;
}
EXPORT_SYMBOL(blkdev_issue_write_same);
}
}
- if (bio)
- return submit_bio_wait(WRITE, bio);
+ if (bio) {
+ ret = submit_bio_wait(WRITE, bio);
+ bio_put(bio);
+ return ret;
+ }
return 0;
}
blk_queue_split(q, &bio, q->bio_split);
- if (!is_flush_fua && !blk_queue_nomerges(q)) {
- if (blk_attempt_plug_merge(q, bio, &request_count,
- &same_queue_rq))
- return BLK_QC_T_NONE;
- } else
- request_count = blk_plug_queued_count(q);
+ if (!is_flush_fua && !blk_queue_nomerges(q) &&
+ blk_attempt_plug_merge(q, bio, &request_count, &same_queue_rq))
+ return BLK_QC_T_NONE;
rq = blk_mq_map_request(q, bio, &data);
if (unlikely(!rq))
blk_queue_split(q, &bio, q->bio_split);
- if (!is_flush_fua && !blk_queue_nomerges(q) &&
- blk_attempt_plug_merge(q, bio, &request_count, NULL))
- return BLK_QC_T_NONE;
+ if (!is_flush_fua && !blk_queue_nomerges(q)) {
+ if (blk_attempt_plug_merge(q, bio, &request_count, NULL))
+ return BLK_QC_T_NONE;
+ } else
+ request_count = blk_plug_queued_count(q);
rq = blk_mq_map_request(q, bio, &data);
if (unlikely(!rq))
tristate "Asymmetric public-key crypto algorithm subtype"
select MPILIB
select CRYPTO_HASH_INFO
+ select CRYPTO_AKCIPHER
help
This option provides support for asymmetric public key type handling.
If signature generation and/or verification are to be used,
pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
pr->pblk = object.processor.pblk_address;
-
- /*
- * We don't care about error returns - we just try to mark
- * these reserved so that nobody else is confused into thinking
- * that this region might be unused..
- *
- * (In particular, allocating the IO range for Cardbus)
- */
- request_region(pr->throttling.address, 6, "ACPI CPU throttle");
}
/*
}
int acpi_video_get_levels(struct acpi_device *device,
- struct acpi_video_device_brightness **dev_br)
+ struct acpi_video_device_brightness **dev_br,
+ int *pmax_level)
{
union acpi_object *obj = NULL;
int i, max_level = 0, count = 0, level_ac_battery = 0;
br->count = count;
*dev_br = br;
+ if (pmax_level)
+ *pmax_level = max_level;
out:
kfree(obj);
struct acpi_video_device_brightness *br = NULL;
int result = -EINVAL;
- result = acpi_video_get_levels(device->dev, &br);
+ result = acpi_video_get_levels(device->dev, &br, &max_level);
if (result)
return result;
device->brightness = br;
mutex_lock(&video->device_list_lock);
list_for_each_entry(dev, &video->video_device_list, entry) {
- if (!acpi_video_device_lcd_query_levels(dev, &levels))
+ if (!acpi_video_device_lcd_query_levels(dev->dev->handle, &levels))
kfree(levels);
}
mutex_unlock(&video->device_list_lock);
static u8
acpi_hw_get_access_bit_width(struct acpi_generic_address *reg, u8 max_bit_width)
{
- u64 address;
-
if (!reg->access_width) {
+ if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
+ max_bit_width = 32;
+ }
+
/*
* Detect old register descriptors where only the bit_width field
- * makes senses. The target address is copied to handle possible
- * alignment issues.
+ * makes senses.
*/
- ACPI_MOVE_64_TO_64(&address, ®->address);
- if (!reg->bit_offset && reg->bit_width &&
+ if (reg->bit_width < max_bit_width &&
+ !reg->bit_offset && reg->bit_width &&
ACPI_IS_POWER_OF_TWO(reg->bit_width) &&
- ACPI_IS_ALIGNED(reg->bit_width, 8) &&
- ACPI_IS_ALIGNED(address, reg->bit_width)) {
+ ACPI_IS_ALIGNED(reg->bit_width, 8)) {
return (reg->bit_width);
- } else {
- if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
- return (32);
- } else {
- return (max_bit_width);
- }
}
+ return (max_bit_width);
} else {
return (1 << (reg->access_width + 2));
}
* Maybe EC region is required at bus_scan/acpi_get_devices. So it
* is necessary to enable it as early as possible.
*/
- acpi_boot_ec_enable();
+ acpi_ec_dsdt_probe();
printk(KERN_INFO PREFIX "Interpreter enabled\n");
return AE_OK;
}
-int __init acpi_boot_ec_enable(void)
+static const struct acpi_device_id ec_device_ids[] = {
+ {"PNP0C09", 0},
+ {"", 0},
+};
+
+int __init acpi_ec_dsdt_probe(void)
{
- if (!boot_ec)
+ acpi_status status;
+
+ if (boot_ec)
return 0;
+
+ /*
+ * Finding EC from DSDT if there is no ECDT EC available. When this
+ * function is invoked, ACPI tables have been fully loaded, we can
+ * walk namespace now.
+ */
+ boot_ec = make_acpi_ec();
+ if (!boot_ec)
+ return -ENOMEM;
+ status = acpi_get_devices(ec_device_ids[0].id,
+ ec_parse_device, boot_ec, NULL);
+ if (ACPI_FAILURE(status) || !boot_ec->handle)
+ return -ENODEV;
if (!ec_install_handlers(boot_ec)) {
first_ec = boot_ec;
return 0;
return -EFAULT;
}
-static const struct acpi_device_id ec_device_ids[] = {
- {"PNP0C09", 0},
- {"", 0},
-};
-
#if 0
/*
* Some EC firmware variations refuses to respond QR_EC when SCI_EVT is not
int acpi_ec_init(void);
int acpi_ec_ecdt_probe(void);
-int acpi_boot_ec_enable(void);
+int acpi_ec_dsdt_probe(void);
void acpi_ec_block_transactions(void);
void acpi_ec_unblock_transactions(void);
void acpi_ec_unblock_transactions_early(void);
if (!pr->flags.throttling)
return -ENODEV;
+ /*
+ * We don't care about error returns - we just try to mark
+ * these reserved so that nobody else is confused into thinking
+ * that this region might be unused..
+ *
+ * (In particular, allocating the IO range for Cardbus)
+ */
+ request_region(pr->throttling.address, 6, "ACPI CPU throttle");
+
pr->throttling.state = 0;
duty_mask = pr->throttling.state_count - 1;
"reserved 27",
"reserved 28",
"reserved 29",
- "reserved 30",
+ "reserved 30", /* FIXME: The strings between 30-40 might be wrong. */
"reassembly abort: no buffers",
"receive buffer overflow",
"change in GFC",
"receive buffer full",
"low priority discard - no receive descriptor",
"low priority discard - missing end of packet",
+ "reserved 37",
+ "reserved 38",
+ "reserved 39",
+ "reseverd 40",
"reserved 41",
"reserved 42",
"reserved 43",
/* make the ptr point to the corresponding buffer desc entry */
buf_desc_ptr += desc;
if (!desc || (desc > iadev->num_rx_desc) ||
- ((buf_desc_ptr->vc_index & 0xffff) > iadev->num_vc)) {
+ ((buf_desc_ptr->vc_index & 0xffff) >= iadev->num_vc)) {
free_desc(dev, desc);
IF_ERR(printk("IA: bad descriptor desc = %d \n", desc);)
return -1;
debugfs_create_u64("size_bytes", 0444, dir, &nbd->bytesize);
debugfs_create_u32("timeout", 0444, dir, &nbd->xmit_timeout);
debugfs_create_u32("blocksize", 0444, dir, &nbd->blksize);
- debugfs_create_file("flags", 0444, dir, &nbd, &nbd_dbg_flags_ops);
+ debugfs_create_file("flags", 0444, dir, nbd, &nbd_dbg_flags_ops);
return 0;
}
const struct blk_mq_queue_data *qd)
{
unsigned long flags;
- struct blkfront_ring_info *rinfo = (struct blkfront_ring_info *)hctx->driver_data;
+ int qid = hctx->queue_num;
+ struct blkfront_info *info = hctx->queue->queuedata;
+ struct blkfront_ring_info *rinfo = NULL;
+ BUG_ON(info->nr_rings <= qid);
+ rinfo = &info->rinfo[qid];
blk_mq_start_request(qd->rq);
spin_lock_irqsave(&rinfo->ring_lock, flags);
if (RING_FULL(&rinfo->ring))
return BLK_MQ_RQ_QUEUE_BUSY;
}
-static int blk_mq_init_hctx(struct blk_mq_hw_ctx *hctx, void *data,
- unsigned int index)
-{
- struct blkfront_info *info = (struct blkfront_info *)data;
-
- BUG_ON(info->nr_rings <= index);
- hctx->driver_data = &info->rinfo[index];
- return 0;
-}
-
static struct blk_mq_ops blkfront_mq_ops = {
.queue_rq = blkif_queue_rq,
.map_queue = blk_mq_map_queue,
- .init_hctx = blk_mq_init_hctx,
};
static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size,
return PTR_ERR(rq);
}
+ rq->queuedata = info;
queue_flag_set_unlocked(QUEUE_FLAG_VIRT, rq);
if (info->feature_discard) {
return err;
err = talk_to_blkback(dev, info);
+ if (!err)
+ blk_mq_update_nr_hw_queues(&info->tag_set, info->nr_rings);
/*
* We have to wait for the backend to switch to
break;
case XenbusStateConnected:
- if (dev->state != XenbusStateInitialised) {
+ /*
+ * talk_to_blkback sets state to XenbusStateInitialised
+ * and blkfront_connect sets it to XenbusStateConnected
+ * (if connection went OK).
+ *
+ * If the backend (or toolstack) decides to poke at backend
+ * state (and re-trigger the watch by setting the state repeatedly
+ * to XenbusStateConnected (4)) we need to deal with this.
+ * This is allowed as this is used to communicate to the guest
+ * that the size of disk has changed!
+ */
+ if ((dev->state != XenbusStateInitialised) &&
+ (dev->state != XenbusStateConnected)) {
if (talk_to_blkback(dev, info))
break;
}
+
blkfront_connect(info);
break;
config COMMON_CLK_NXP
def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
select REGMAP_MMIO if ARCH_LPC32XX
+ select MFD_SYSCON if ARCH_LPC18XX
---help---
Support for clock providers on NXP platforms.
/* register fixed rate clocks */
clks[POSCCLK] = clk_register_fixed_rate(&pdev->dev, "posc_clk", NULL,
- CLK_IS_ROOT, 24000000);
+ 0, 24000000);
clks[FRCCLK] = clk_register_fixed_rate(&pdev->dev, "frc_clk", NULL,
- CLK_IS_ROOT, 8000000);
+ 0, 8000000);
clks[BFRCCLK] = clk_register_fixed_rate(&pdev->dev, "bfrc_clk", NULL,
- CLK_IS_ROOT, 8000000);
+ 0, 8000000);
clks[LPRCCLK] = clk_register_fixed_rate(&pdev->dev, "lprc_clk", NULL,
- CLK_IS_ROOT, 32000);
+ 0, 32000);
clks[UPLLCLK] = clk_register_fixed_rate(&pdev->dev, "usbphy_clk", NULL,
- CLK_IS_ROOT, 24000000);
+ 0, 24000000);
/* fixed rate (optional) clock */
if (of_find_property(np, "microchip,pic32mzda-sosc", NULL)) {
pr_info("pic32-clk: dt requests SOSC.\n");
DT_CLK(NULL, "smartreflex1_fck", "smartreflex1_fck"),
DT_CLK(NULL, "sha0_fck", "sha0_fck"),
DT_CLK(NULL, "aes0_fck", "aes0_fck"),
+ DT_CLK(NULL, "rng_fck", "rng_fck"),
DT_CLK(NULL, "timer1_fck", "timer1_fck"),
DT_CLK(NULL, "timer2_fck", "timer2_fck"),
DT_CLK(NULL, "timer3_fck", "timer3_fck"),
unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy,
unsigned int target_freq)
{
- clamp_val(target_freq, policy->min, policy->max);
+ target_freq = clamp_val(target_freq, policy->min, policy->max);
return cpufreq_driver->fast_switch(policy, target_freq);
}
cpu->acpi_perf_data.states[0].core_frequency =
policy->cpuinfo.max_freq / 1000;
cpu->valid_pss_table = true;
- pr_info("_PPC limits will be enforced\n");
+ pr_debug("_PPC limits will be enforced\n");
return;
intel_pstate_clear_update_util_hook(policy->cpu);
+ pr_debug("set_policy cpuinfo.max %u policy->max %u\n",
+ policy->cpuinfo.max_freq, policy->max);
+
cpu = all_cpu_data[0];
if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate &&
policy->max < policy->cpuinfo.max_freq &&
limits->max_sysfs_pct);
limits->max_perf_pct = max(limits->min_policy_pct,
limits->max_perf_pct);
- limits->max_perf = round_up(limits->max_perf, FRAC_BITS);
/* Make sure min_perf_pct <= max_perf_pct */
limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct);
limits->min_perf = div_fp(limits->min_perf_pct, 100);
limits->max_perf = div_fp(limits->max_perf_pct, 100);
+ limits->max_perf = round_up(limits->max_perf, FRAC_BITS);
out:
intel_pstate_set_update_util_hook(policy->cpu);
/* cpuinfo and default policy values */
policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
- policy->cpuinfo.max_freq =
- cpu->pstate.turbo_pstate * cpu->pstate.scaling;
+ update_turbo_state();
+ policy->cpuinfo.max_freq = limits->turbo_disabled ?
+ cpu->pstate.max_pstate : cpu->pstate.turbo_pstate;
+ policy->cpuinfo.max_freq *= cpu->pstate.scaling;
+
intel_pstate_init_acpi_perf_limits(policy);
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
cpumask_set_cpu(policy->cpu, policy->cpus);
struct ccp_ctx *ctx = crypto_tfm_ctx(req->base.tfm);
struct ccp_aes_req_ctx *rctx = ablkcipher_request_ctx(req);
unsigned int unit;
+ u32 unit_size;
int ret;
if (!ctx->u.aes.key_len)
if (!req->info)
return -EINVAL;
- for (unit = 0; unit < ARRAY_SIZE(unit_size_map); unit++)
- if (!(req->nbytes & (unit_size_map[unit].size - 1)))
- break;
+ unit_size = CCP_XTS_AES_UNIT_SIZE__LAST;
+ if (req->nbytes <= unit_size_map[0].size) {
+ for (unit = 0; unit < ARRAY_SIZE(unit_size_map); unit++) {
+ if (!(req->nbytes & (unit_size_map[unit].size - 1))) {
+ unit_size = unit_size_map[unit].value;
+ break;
+ }
+ }
+ }
- if ((unit_size_map[unit].value == CCP_XTS_AES_UNIT_SIZE__LAST) ||
+ if ((unit_size == CCP_XTS_AES_UNIT_SIZE__LAST) ||
(ctx->u.aes.key_len != AES_KEYSIZE_128)) {
/* Use the fallback to process the request for any
* unsupported unit sizes or key sizes
rctx->cmd.engine = CCP_ENGINE_XTS_AES_128;
rctx->cmd.u.xts.action = (encrypt) ? CCP_AES_ACTION_ENCRYPT
: CCP_AES_ACTION_DECRYPT;
- rctx->cmd.u.xts.unit_size = unit_size_map[unit].value;
+ rctx->cmd.u.xts.unit_size = unit_size;
rctx->cmd.u.xts.key = &ctx->u.aes.key_sg;
rctx->cmd.u.xts.key_len = ctx->u.aes.key_len;
rctx->cmd.u.xts.iv = &rctx->iv_sg;
&dd->pdata->algs_info[i].algs_list[j]);
err_pm:
pm_runtime_disable(dev);
- if (dd->polling_mode)
+ if (!dd->polling_mode)
dma_release_channel(dd->dma_lch);
data_err:
dev_err(dev, "initialization failed.\n");
#include <linux/seq_file.h>
#include <linux/poll.h>
#include <linux/reservation.h>
+#include <linux/mm.h>
#include <uapi/linux/dma-buf.h>
dmabuf = file->private_data;
/* check for overflowing the buffer's size */
- if (vma->vm_pgoff + ((vma->vm_end - vma->vm_start) >> PAGE_SHIFT) >
+ if (vma->vm_pgoff + vma_pages(vma) >
dmabuf->size >> PAGE_SHIFT)
return -EINVAL;
return -EINVAL;
/* check for offset overflow */
- if (pgoff + ((vma->vm_end - vma->vm_start) >> PAGE_SHIFT) < pgoff)
+ if (pgoff + vma_pages(vma) < pgoff)
return -EOVERFLOW;
/* check for overflowing the buffer's size */
- if (pgoff + ((vma->vm_end - vma->vm_start) >> PAGE_SHIFT) >
+ if (pgoff + vma_pages(vma) >
dmabuf->size >> PAGE_SHIFT)
return -EINVAL;
#include <linux/reservation.h>
#include <linux/export.h>
+/**
+ * DOC: Reservation Object Overview
+ *
+ * The reservation object provides a mechanism to manage shared and
+ * exclusive fences associated with a buffer. A reservation object
+ * can have attached one exclusive fence (normally associated with
+ * write operations) or N shared fences (read operations). The RCU
+ * mechanism is used to protect read access to fences from locked
+ * write-side updates.
+ */
+
DEFINE_WW_CLASS(reservation_ww_class);
EXPORT_SYMBOL(reservation_ww_class);
const char reservation_seqcount_string[] = "reservation_seqcount";
EXPORT_SYMBOL(reservation_seqcount_string);
-/*
- * Reserve space to add a shared fence to a reservation_object,
- * must be called with obj->lock held.
+
+/**
+ * reservation_object_reserve_shared - Reserve space to add a shared
+ * fence to a reservation_object.
+ * @obj: reservation object
+ *
+ * Should be called before reservation_object_add_shared_fence(). Must
+ * be called with obj->lock held.
+ *
+ * RETURNS
+ * Zero for success, or -errno
*/
int reservation_object_reserve_shared(struct reservation_object *obj)
{
fence_put(old_fence);
}
-/*
+/**
+ * reservation_object_add_shared_fence - Add a fence to a shared slot
+ * @obj: the reservation object
+ * @fence: the shared fence to add
+ *
* Add a fence to a shared slot, obj->lock must be held, and
* reservation_object_reserve_shared_fence has been called.
*/
}
EXPORT_SYMBOL(reservation_object_add_shared_fence);
+/**
+ * reservation_object_add_excl_fence - Add an exclusive fence.
+ * @obj: the reservation object
+ * @fence: the shared fence to add
+ *
+ * Add a fence to the exclusive slot. The obj->lock must be held.
+ */
void reservation_object_add_excl_fence(struct reservation_object *obj,
struct fence *fence)
{
}
EXPORT_SYMBOL(reservation_object_add_excl_fence);
+/**
+ * reservation_object_get_fences_rcu - Get an object's shared and exclusive
+ * fences without update side lock held
+ * @obj: the reservation object
+ * @pfence_excl: the returned exclusive fence (or NULL)
+ * @pshared_count: the number of shared fences returned
+ * @pshared: the array of shared fence ptrs returned (array is krealloc'd to
+ * the required size, and must be freed by caller)
+ *
+ * RETURNS
+ * Zero or -errno
+ */
int reservation_object_get_fences_rcu(struct reservation_object *obj,
struct fence **pfence_excl,
unsigned *pshared_count,
}
EXPORT_SYMBOL_GPL(reservation_object_get_fences_rcu);
+/**
+ * reservation_object_wait_timeout_rcu - Wait on reservation's objects
+ * shared and/or exclusive fences.
+ * @obj: the reservation object
+ * @wait_all: if true, wait on all fences, else wait on just exclusive fence
+ * @intr: if true, do interruptible wait
+ * @timeout: timeout value in jiffies or zero to return immediately
+ *
+ * RETURNS
+ * Returns -ERESTARTSYS if interrupted, 0 if the wait timed out, or
+ * greater than zer on success.
+ */
long reservation_object_wait_timeout_rcu(struct reservation_object *obj,
bool wait_all, bool intr,
unsigned long timeout)
return ret;
}
+/**
+ * reservation_object_test_signaled_rcu - Test if a reservation object's
+ * fences have been signaled.
+ * @obj: the reservation object
+ * @test_all: if true, test all fences, otherwise only test the exclusive
+ * fence
+ *
+ * RETURNS
+ * true if all fences signaled, else false
+ */
bool reservation_object_test_signaled_rcu(struct reservation_object *obj,
bool test_all)
{
list_for_each(item, &mc_devices) {
mci = list_entry(item, struct mem_ctl_info, link);
- edac_mod_work(&mci->work, value);
+ if (mci->op_state == OP_RUNNING_POLL)
+ edac_mod_work(&mci->work, value);
}
mutex_unlock(&mem_ctls_mutex);
}
{ 0x1a0, 0x1a4, 0x1a8, 0x1ac, 0x1b0, 0x1b4, 0x1b8, 0x1bc },
};
-#define RIR_RNK_TGT(reg) GET_BITFIELD(reg, 16, 19)
-#define RIR_OFFSET(reg) GET_BITFIELD(reg, 2, 14)
+#define RIR_RNK_TGT(type, reg) (((type) == BROADWELL) ? \
+ GET_BITFIELD(reg, 20, 23) : GET_BITFIELD(reg, 16, 19))
+
+#define RIR_OFFSET(type, reg) (((type) == HASWELL || (type) == BROADWELL) ? \
+ GET_BITFIELD(reg, 2, 15) : GET_BITFIELD(reg, 2, 14))
/* Device 16, functions 2-7 */
struct pci_id_table {
const struct pci_id_descr *descr;
int n_devs;
+ enum type type;
};
struct sbridge_dev {
{ PCI_DESCR(PCI_DEVICE_ID_INTEL_SBRIDGE_BR, 0) },
};
-#define PCI_ID_TABLE_ENTRY(A) { .descr=A, .n_devs = ARRAY_SIZE(A) }
+#define PCI_ID_TABLE_ENTRY(A, T) { \
+ .descr = A, \
+ .n_devs = ARRAY_SIZE(A), \
+ .type = T \
+}
+
static const struct pci_id_table pci_dev_descr_sbridge_table[] = {
- PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge),
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_sbridge, SANDY_BRIDGE),
{0,} /* 0 terminated list. */
};
};
static const struct pci_id_table pci_dev_descr_ibridge_table[] = {
- PCI_ID_TABLE_ENTRY(pci_dev_descr_ibridge),
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_ibridge, IVY_BRIDGE),
{0,} /* 0 terminated list. */
};
};
static const struct pci_id_table pci_dev_descr_haswell_table[] = {
- PCI_ID_TABLE_ENTRY(pci_dev_descr_haswell),
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_haswell, HASWELL),
{0,} /* 0 terminated list. */
};
};
static const struct pci_id_table pci_dev_descr_knl_table[] = {
- PCI_ID_TABLE_ENTRY(pci_dev_descr_knl),
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_knl, KNIGHTS_LANDING),
{0,}
};
};
static const struct pci_id_table pci_dev_descr_broadwell_table[] = {
- PCI_ID_TABLE_ENTRY(pci_dev_descr_broadwell),
+ PCI_ID_TABLE_ENTRY(pci_dev_descr_broadwell, BROADWELL),
{0,} /* 0 terminated list. */
};
pci_read_config_dword(pvt->pci_tad[i],
rir_offset[j][k],
®);
- tmp_mb = RIR_OFFSET(reg) << 6;
+ tmp_mb = RIR_OFFSET(pvt->info.type, reg) << 6;
gb = div_u64_rem(tmp_mb, 1024, &mb);
edac_dbg(0, "CH#%d RIR#%d INTL#%d, offset %u.%03u GB (0x%016Lx), tgt: %d, reg=0x%08x\n",
i, j, k,
gb, (mb*1000)/1024,
((u64)tmp_mb) << 20L,
- (u32)RIR_RNK_TGT(reg),
+ (u32)RIR_RNK_TGT(pvt->info.type, reg),
reg);
}
}
pci_read_config_dword(pvt->pci_tad[ch_add + base_ch],
rir_offset[n_rir][idx],
®);
- *rank = RIR_RNK_TGT(reg);
+ *rank = RIR_RNK_TGT(pvt->info.type, reg);
edac_dbg(0, "RIR#%d: channel address 0x%08Lx < 0x%08Lx, RIR interleave %d, index %d\n",
n_rir,
#define ICPU(model, table) \
{ X86_VENDOR_INTEL, 6, model, 0, (unsigned long)&table }
-/* Order here must match "enum type" */
static const struct x86_cpu_id sbridge_cpuids[] = {
ICPU(0x2d, pci_dev_descr_sbridge_table), /* SANDY_BRIDGE */
ICPU(0x3e, pci_dev_descr_ibridge_table), /* IVY_BRIDGE */
ICPU(0x3f, pci_dev_descr_haswell_table), /* HASWELL */
ICPU(0x4f, pci_dev_descr_broadwell_table), /* BROADWELL */
+ ICPU(0x56, pci_dev_descr_broadwell_table), /* BROADWELL-DE */
ICPU(0x57, pci_dev_descr_knl_table), /* KNIGHTS_LANDING */
{ }
};
mc, mc + 1, num_mc);
sbridge_dev->mc = mc++;
- rc = sbridge_register_mci(sbridge_dev, id - sbridge_cpuids);
+ rc = sbridge_register_mci(sbridge_dev, ptable->type);
if (unlikely(rc < 0))
goto fail1;
}
{
efi_memory_desc_t *md;
u64 paddr, npages, size;
+ int resv;
if (efi_enabled(EFI_DBG))
pr_info("Processing EFI memory map:\n");
paddr = md->phys_addr;
npages = md->num_pages;
+ resv = is_reserve_region(md);
if (efi_enabled(EFI_DBG)) {
char buf[64];
- pr_info(" 0x%012llx-0x%012llx %s",
+ pr_info(" 0x%012llx-0x%012llx %s%s\n",
paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1,
- efi_md_typeattr_format(buf, sizeof(buf), md));
+ efi_md_typeattr_format(buf, sizeof(buf), md),
+ resv ? "*" : "");
}
memrange_efi_to_native(&paddr, &npages);
if (is_normal_ram(md))
early_init_dt_add_memory_arch(paddr, size);
- if (is_reserve_region(md)) {
+ if (resv)
memblock_mark_nomap(paddr, size);
- if (efi_enabled(EFI_DBG))
- pr_cont("*");
- }
- if (efi_enabled(EFI_DBG))
- pr_cont("\n");
}
set_bit(EFI_MEMMAP, &efi.flags);
menuconfig GPIOLIB
bool "GPIO Support"
+ select ANON_INODES
help
This enables GPIO support through the generic GPIO library.
You only need to enable this, if you also want to enable
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
const unsigned io_port = offset / 8;
- const unsigned control_port = io_port / 2;
+ const unsigned int control_port = io_port / 3;
const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
unsigned long flags;
unsigned control;
{
struct dio48e_gpio *const dio48egpio = gpiochip_get_data(chip);
const unsigned io_port = offset / 8;
- const unsigned control_port = io_port / 2;
+ const unsigned int control_port = io_port / 3;
const unsigned mask = BIT(offset % 8);
const unsigned control_addr = dio48egpio->base + 3 + control_port*4;
const unsigned out_port = (io_port > 2) ? io_port + 1 : io_port;
/* disable interrupts and clear status */
for (i = 0; i < kona_gpio->num_bank; i++) {
/* Unlock the entire bank first */
- bcm_kona_gpio_write_lock_regs(kona_gpio, i, UNLOCK_CODE);
+ bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE);
writel(0xffffffff, reg_base + GPIO_INT_MASK(i));
writel(0xffffffff, reg_base + GPIO_INT_STATUS(i));
/* Now re-lock the bank */
- bcm_kona_gpio_write_lock_regs(kona_gpio, i, LOCK_CODE);
+ bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE);
}
}
#include <mach/hardware.h>
#include <mach/platform.h>
-#include <mach/irqs.h>
#define LPC32XX_GPIO_P3_INP_STATE _GPREG(0x000)
#define LPC32XX_GPIO_P3_OUTP_SET _GPREG(0x004)
static int lpc32xx_gpio_to_irq_p01(struct gpio_chip *chip, unsigned offset)
{
- return IRQ_LPC32XX_P0_P1_IRQ;
+ return -ENXIO;
}
-static const char lpc32xx_gpio_to_irq_gpio_p3_table[] = {
- IRQ_LPC32XX_GPIO_00,
- IRQ_LPC32XX_GPIO_01,
- IRQ_LPC32XX_GPIO_02,
- IRQ_LPC32XX_GPIO_03,
- IRQ_LPC32XX_GPIO_04,
- IRQ_LPC32XX_GPIO_05,
-};
-
static int lpc32xx_gpio_to_irq_gpio_p3(struct gpio_chip *chip, unsigned offset)
{
- if (offset < ARRAY_SIZE(lpc32xx_gpio_to_irq_gpio_p3_table))
- return lpc32xx_gpio_to_irq_gpio_p3_table[offset];
return -ENXIO;
}
-static const char lpc32xx_gpio_to_irq_gpi_p3_table[] = {
- IRQ_LPC32XX_GPI_00,
- IRQ_LPC32XX_GPI_01,
- IRQ_LPC32XX_GPI_02,
- IRQ_LPC32XX_GPI_03,
- IRQ_LPC32XX_GPI_04,
- IRQ_LPC32XX_GPI_05,
- IRQ_LPC32XX_GPI_06,
- IRQ_LPC32XX_GPI_07,
- IRQ_LPC32XX_GPI_08,
- IRQ_LPC32XX_GPI_09,
- -ENXIO, /* 10 */
- -ENXIO, /* 11 */
- -ENXIO, /* 12 */
- -ENXIO, /* 13 */
- -ENXIO, /* 14 */
- -ENXIO, /* 15 */
- -ENXIO, /* 16 */
- -ENXIO, /* 17 */
- -ENXIO, /* 18 */
- IRQ_LPC32XX_GPI_19,
- -ENXIO, /* 20 */
- -ENXIO, /* 21 */
- -ENXIO, /* 22 */
- -ENXIO, /* 23 */
- -ENXIO, /* 24 */
- -ENXIO, /* 25 */
- -ENXIO, /* 26 */
- -ENXIO, /* 27 */
- IRQ_LPC32XX_GPI_28,
-};
-
static int lpc32xx_gpio_to_irq_gpi_p3(struct gpio_chip *chip, unsigned offset)
{
- if (offset < ARRAY_SIZE(lpc32xx_gpio_to_irq_gpi_p3_table))
- return lpc32xx_gpio_to_irq_gpi_p3_table[offset];
return -ENXIO;
}
dev_err(&pdev->dev, "input clock not found.\n");
return PTR_ERR(gpio->clk);
}
+ ret = clk_prepare_enable(gpio->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "Unable to enable clock.\n");
+ return ret;
+ }
+ pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0)
pm_runtime_put(&pdev->dev);
err_pm_dis:
pm_runtime_disable(&pdev->dev);
+ clk_disable_unprepare(gpio->clk);
return ret;
}
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/io-mapping.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/cdev.h>
#include <linux/fs.h>
#include <linux/uaccess.h>
+#include <linux/compat.h>
#include <uapi/linux/gpio.h>
#include "gpiolib.h"
{
struct gpio_device *gdev = filp->private_data;
struct gpio_chip *chip = gdev->chip;
- int __user *ip = (int __user *)arg;
+ void __user *ip = (void __user *)arg;
/* We fail any subsequent ioctl():s when the chip is gone */
if (!chip)
return -EINVAL;
}
+#ifdef CONFIG_COMPAT
+static long gpio_ioctl_compat(struct file *filp, unsigned int cmd,
+ unsigned long arg)
+{
+ return gpio_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
+}
+#endif
+
/**
* gpio_chrdev_open() - open the chardev for ioctl operations
* @inode: inode for this chardev
.owner = THIS_MODULE,
.llseek = noop_llseek,
.unlocked_ioctl = gpio_ioctl,
- .compat_ioctl = gpio_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = gpio_ioctl_compat,
+#endif
};
static void gpiodevice_release(struct device *dev)
{
struct gpio_device *gdev = dev_get_drvdata(dev);
- cdev_del(&gdev->chrdev);
list_del(&gdev->list);
ida_simple_remove(&gpio_ida, gdev->id);
kfree(gdev->label);
/* From this point, the .release() function cleans up gpio_device */
gdev->dev.release = gpiodevice_release;
- get_device(&gdev->dev);
pr_debug("%s: registered GPIOs %d to %d on device: %s (%s)\n",
__func__, gdev->base, gdev->base + gdev->ngpio - 1,
dev_name(&gdev->dev), gdev->chip->label ? : "generic");
goto err_free_label;
}
+ spin_unlock_irqrestore(&gpio_lock, flags);
+
for (i = 0; i < chip->ngpio; i++) {
struct gpio_desc *desc = &gdev->descs[i];
}
}
- spin_unlock_irqrestore(&gpio_lock, flags);
-
#ifdef CONFIG_PINCTRL
INIT_LIST_HEAD(&gdev->pin_ranges);
#endif
* be removed, else it will be dangling until the last user is
* gone.
*/
+ cdev_del(&gdev->chrdev);
+ device_del(&gdev->dev);
put_device(&gdev->dev);
}
EXPORT_SYMBOL_GPL(gpiochip_remove);
spin_lock_irqsave(&gpio_lock, flags);
list_for_each_entry(gdev, &gpio_devices, list)
- if (match(gdev->chip, data))
+ if (gdev->chip && match(gdev->chip, data))
break;
/* No match? */
/*
* This descriptor validation needs to be inserted verbatim into each
* function taking a descriptor, so we need to use a preprocessor
- * macro to avoid endless duplication.
+ * macro to avoid endless duplication. If the desc is NULL it is an
+ * optional GPIO and calls should just bail out.
*/
#define VALIDATE_DESC(desc) do { \
- if (!desc || !desc->gdev) { \
+ if (!desc) \
+ return 0; \
+ if (!desc->gdev) { \
pr_warn("%s: invalid GPIO\n", __func__); \
return -EINVAL; \
} \
} } while (0)
#define VALIDATE_DESC_VOID(desc) do { \
- if (!desc || !desc->gdev) { \
+ if (!desc) \
+ return; \
+ if (!desc->gdev) { \
pr_warn("%s: invalid GPIO\n", __func__); \
return; \
} \
*/
int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset)
{
- if (offset >= chip->ngpio)
- return -EINVAL;
+ struct gpio_desc *desc;
+
+ desc = gpiochip_get_desc(chip, offset);
+ if (IS_ERR(desc))
+ return PTR_ERR(desc);
+
+ /* Flush direction if something changed behind our back */
+ if (chip->get_direction) {
+ int dir = chip->get_direction(chip, offset);
+
+ if (dir)
+ clear_bit(FLAG_IS_OUT, &desc->flags);
+ else
+ set_bit(FLAG_IS_OUT, &desc->flags);
+ }
- if (test_bit(FLAG_IS_OUT, &chip->gpiodev->descs[offset].flags)) {
+ if (test_bit(FLAG_IS_OUT, &desc->flags)) {
chip_err(chip,
"%s: tried to flag a GPIO set as output for IRQ\n",
__func__);
return -EIO;
}
- set_bit(FLAG_USED_AS_IRQ, &chip->gpiodev->descs[offset].flags);
+ set_bit(FLAG_USED_AS_IRQ, &desc->flags);
return 0;
}
EXPORT_SYMBOL_GPL(gpiochip_lock_as_irq);
unsigned cond_exe_offs;
u64 cond_exe_gpu_addr;
volatile u32 *cond_exe_cpu_addr;
+ int vmid;
};
/*
unsigned vm_id, uint64_t pd_addr,
uint32_t gds_base, uint32_t gds_size,
uint32_t gws_base, uint32_t gws_size,
- uint32_t oa_base, uint32_t oa_size);
+ uint32_t oa_base, uint32_t oa_size,
+ bool vmid_switch);
void amdgpu_vm_reset_id(struct amdgpu_device *adev, unsigned vm_id);
uint64_t amdgpu_vm_map_gart(const dma_addr_t *pages_addr, uint64_t addr);
int amdgpu_vm_update_page_directory(struct amdgpu_device *adev,
return result;
}
+static int amdgpu_cgs_rel_firmware(struct cgs_device *cgs_device, enum cgs_ucode_id type)
+{
+ CGS_FUNC_ADEV;
+ if ((CGS_UCODE_ID_SMU == type) || (CGS_UCODE_ID_SMU_SK == type)) {
+ release_firmware(adev->pm.fw);
+ return 0;
+ }
+ /* cannot release other firmware because they are not created by cgs */
+ return -EINVAL;
+}
+
static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device,
enum cgs_ucode_id type,
struct cgs_firmware_info *info)
amdgpu_cgs_pm_query_clock_limits,
amdgpu_cgs_set_camera_voltages,
amdgpu_cgs_get_firmware_info,
+ amdgpu_cgs_rel_firmware,
amdgpu_cgs_set_powergating_state,
amdgpu_cgs_set_clockgating_state,
amdgpu_cgs_get_active_displays_info,
*/
static void amdgpu_atombios_fini(struct amdgpu_device *adev)
{
- if (adev->mode_info.atom_context)
+ if (adev->mode_info.atom_context) {
kfree(adev->mode_info.atom_context->scratch);
+ kfree(adev->mode_info.atom_context->iio);
+ }
kfree(adev->mode_info.atom_context);
adev->mode_info.atom_context = NULL;
kfree(adev->mode_info.atom_card_info);
adev->ip_block_status[i].valid = false;
}
+ for (i = adev->num_ip_blocks - 1; i >= 0; i--) {
+ if (adev->ip_blocks[i].funcs->late_fini)
+ adev->ip_blocks[i].funcs->late_fini((void *)adev);
+ }
+
return 0;
}
amdgpu_atombios_has_gpu_virtualization_table(adev);
/* Post card if necessary */
- if (!amdgpu_card_posted(adev) ||
- adev->virtualization.supports_sr_iov) {
+ if (!amdgpu_card_posted(adev)) {
if (!adev->bios) {
dev_err(adev->dev, "Card not posted and no BIOS - ignoring\n");
return -EINVAL;
bool skip_preamble, need_ctx_switch;
unsigned patch_offset = ~0;
struct amdgpu_vm *vm;
+ int vmid = 0, old_vmid = ring->vmid;
struct fence *hwf;
uint64_t ctx;
if (job) {
vm = job->vm;
ctx = job->ctx;
+ vmid = job->vm_id;
} else {
vm = NULL;
ctx = 0;
+ vmid = 0;
}
if (!ring->ready) {
r = amdgpu_vm_flush(ring, job->vm_id, job->vm_pd_addr,
job->gds_base, job->gds_size,
job->gws_base, job->gws_size,
- job->oa_base, job->oa_size);
+ job->oa_base, job->oa_size,
+ (ring->current_ctx == ctx) && (old_vmid != vmid));
if (r) {
amdgpu_ring_undo(ring);
return r;
need_ctx_switch = ring->current_ctx != ctx;
for (i = 0; i < num_ibs; ++i) {
ib = &ibs[i];
-
/* drop preamble IBs if we don't have a context switch */
if ((ib->flags & AMDGPU_IB_FLAG_PREAMBLE) && skip_preamble)
continue;
amdgpu_ring_emit_ib(ring, ib, job ? job->vm_id : 0,
need_ctx_switch);
need_ctx_switch = false;
+ ring->vmid = vmid;
}
if (ring->funcs->emit_hdp_invalidate)
dev_err(adev->dev, "failed to emit fence (%d)\n", r);
if (job && job->vm_id)
amdgpu_vm_reset_id(adev, job->vm_id);
+ ring->vmid = old_vmid;
amdgpu_ring_undo(ring);
return r;
}
if (ret)
return ret;
-#ifdef CONFIG_DRM_AMD_POWERPLAY
- if (adev->pp_enabled) {
- amdgpu_pm_sysfs_fini(adev);
- amd_powerplay_fini(adev->powerplay.pp_handle);
- }
-#endif
-
return ret;
}
return ret;
}
+static void amdgpu_pp_late_fini(void *handle)
+{
+#ifdef CONFIG_DRM_AMD_POWERPLAY
+ struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+
+ if (adev->pp_enabled) {
+ amdgpu_pm_sysfs_fini(adev);
+ amd_powerplay_fini(adev->powerplay.pp_handle);
+ }
+
+ if (adev->powerplay.ip_funcs->late_fini)
+ adev->powerplay.ip_funcs->late_fini(
+ adev->powerplay.pp_handle);
+#endif
+}
+
static int amdgpu_pp_suspend(void *handle)
{
int ret = 0;
.sw_fini = amdgpu_pp_sw_fini,
.hw_init = amdgpu_pp_hw_init,
.hw_fini = amdgpu_pp_hw_fini,
+ .late_fini = amdgpu_pp_late_fini,
.suspend = amdgpu_pp_suspend,
.resume = amdgpu_pp_resume,
.is_idle = amdgpu_pp_is_idle,
ring->ring = NULL;
ring->ring_obj = NULL;
+ amdgpu_wb_free(ring->adev, ring->cond_exe_offs);
amdgpu_wb_free(ring->adev, ring->fence_offs);
amdgpu_wb_free(ring->adev, ring->rptr_offs);
amdgpu_wb_free(ring->adev, ring->wptr_offs);
return r;
}
r = amdgpu_bo_kmap(sa_manager->bo, &sa_manager->cpu_ptr);
+ memset(sa_manager->cpu_ptr, 0, sa_manager->size);
amdgpu_bo_unreserve(sa_manager->bo);
return r;
}
{
int r;
- if (adev->uvd.vcpu_bo == NULL)
- return 0;
+ kfree(adev->uvd.saved_bo);
amd_sched_entity_fini(&adev->uvd.ring.sched, &adev->uvd.entity);
- r = amdgpu_bo_reserve(adev->uvd.vcpu_bo, false);
- if (!r) {
- amdgpu_bo_kunmap(adev->uvd.vcpu_bo);
- amdgpu_bo_unpin(adev->uvd.vcpu_bo);
- amdgpu_bo_unreserve(adev->uvd.vcpu_bo);
- }
+ if (adev->uvd.vcpu_bo) {
+ r = amdgpu_bo_reserve(adev->uvd.vcpu_bo, false);
+ if (!r) {
+ amdgpu_bo_kunmap(adev->uvd.vcpu_bo);
+ amdgpu_bo_unpin(adev->uvd.vcpu_bo);
+ amdgpu_bo_unreserve(adev->uvd.vcpu_bo);
+ }
- amdgpu_bo_unref(&adev->uvd.vcpu_bo);
+ amdgpu_bo_unref(&adev->uvd.vcpu_bo);
+ }
amdgpu_ring_fini(&adev->uvd.ring);
unsigned vm_id, uint64_t pd_addr,
uint32_t gds_base, uint32_t gds_size,
uint32_t gws_base, uint32_t gws_size,
- uint32_t oa_base, uint32_t oa_size)
+ uint32_t oa_base, uint32_t oa_size,
+ bool vmid_switch)
{
struct amdgpu_device *adev = ring->adev;
struct amdgpu_vm_id *id = &adev->vm_manager.ids[vm_id];
int r;
if (ring->funcs->emit_pipeline_sync && (
- pd_addr != AMDGPU_VM_NO_FLUSH || gds_switch_needed ||
- ring->type == AMDGPU_RING_TYPE_COMPUTE))
+ pd_addr != AMDGPU_VM_NO_FLUSH || gds_switch_needed || vmid_switch))
amdgpu_ring_emit_pipeline_sync(ring);
if (ring->funcs->emit_vm_flush &&
ci_dpm_fini(adev);
mutex_unlock(&adev->pm.mutex);
+ release_firmware(adev->pm.fw);
+ adev->pm.fw = NULL;
+
return 0;
}
u32 amdgpu_cik_gpu_check_soft_reset(struct amdgpu_device *adev);
+
+static void cik_sdma_free_microcode(struct amdgpu_device *adev)
+{
+ int i;
+ for (i = 0; i < adev->sdma.num_instances; i++) {
+ release_firmware(adev->sdma.instance[i].fw);
+ adev->sdma.instance[i].fw = NULL;
+ }
+}
+
/*
* sDMA - System DMA
* Starting with CIK, the GPU has new asynchronous
/* Initialize the ring buffer's read and write pointers */
WREG32(mmSDMA0_GFX_RB_RPTR + sdma_offsets[i], 0);
WREG32(mmSDMA0_GFX_RB_WPTR + sdma_offsets[i], 0);
+ WREG32(mmSDMA0_GFX_IB_RPTR + sdma_offsets[i], 0);
+ WREG32(mmSDMA0_GFX_IB_OFFSET + sdma_offsets[i], 0);
/* set the wb address whether it's enabled or not */
WREG32(mmSDMA0_GFX_RB_RPTR_ADDR_HI + sdma_offsets[i],
WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], ib_cntl);
ring->ready = true;
+ }
+
+ cik_sdma_enable(adev, true);
+ for (i = 0; i < adev->sdma.num_instances; i++) {
+ ring = &adev->sdma.instance[i].ring;
r = amdgpu_ring_test_ring(ring);
if (r) {
ring->ready = false;
if (r)
return r;
- /* unhalt the MEs */
- cik_sdma_enable(adev, true);
+ /* halt the engine before programing */
+ cik_sdma_enable(adev, false);
/* start the gfx rings and rlc compute queues */
r = cik_sdma_gfx_resume(adev);
for (i = 0; i < adev->sdma.num_instances; i++)
amdgpu_ring_fini(&adev->sdma.instance[i].ring);
+ cik_sdma_free_microcode(adev);
return 0;
}
static int fiji_dpm_sw_fini(void *handle)
{
+ struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+
+ release_firmware(adev->pm.fw);
+ adev->pm.fw = NULL;
+
return 0;
}
return err;
}
+static void gfx_v7_0_free_microcode(struct amdgpu_device *adev)
+{
+ release_firmware(adev->gfx.pfp_fw);
+ adev->gfx.pfp_fw = NULL;
+ release_firmware(adev->gfx.me_fw);
+ adev->gfx.me_fw = NULL;
+ release_firmware(adev->gfx.ce_fw);
+ adev->gfx.ce_fw = NULL;
+ release_firmware(adev->gfx.mec_fw);
+ adev->gfx.mec_fw = NULL;
+ release_firmware(adev->gfx.mec2_fw);
+ adev->gfx.mec2_fw = NULL;
+ release_firmware(adev->gfx.rlc_fw);
+ adev->gfx.rlc_fw = NULL;
+}
+
/**
* gfx_v7_0_tiling_mode_table_init - init the hw tiling table
*
gfx_v7_0_cp_compute_fini(adev);
gfx_v7_0_rlc_fini(adev);
gfx_v7_0_mec_fini(adev);
+ gfx_v7_0_free_microcode(adev);
return 0;
}
return r;
}
+
+static void gfx_v8_0_free_microcode(struct amdgpu_device *adev) {
+ release_firmware(adev->gfx.pfp_fw);
+ adev->gfx.pfp_fw = NULL;
+ release_firmware(adev->gfx.me_fw);
+ adev->gfx.me_fw = NULL;
+ release_firmware(adev->gfx.ce_fw);
+ adev->gfx.ce_fw = NULL;
+ release_firmware(adev->gfx.rlc_fw);
+ adev->gfx.rlc_fw = NULL;
+ release_firmware(adev->gfx.mec_fw);
+ adev->gfx.mec_fw = NULL;
+ if ((adev->asic_type != CHIP_STONEY) &&
+ (adev->asic_type != CHIP_TOPAZ))
+ release_firmware(adev->gfx.mec2_fw);
+ adev->gfx.mec2_fw = NULL;
+
+ kfree(adev->gfx.rlc.register_list_format);
+}
+
static int gfx_v8_0_init_microcode(struct amdgpu_device *adev)
{
const char *chip_name;
gfx_v8_0_rlc_fini(adev);
- kfree(adev->gfx.rlc.register_list_format);
+ gfx_v8_0_free_microcode(adev);
return 0;
}
amdgpu_ring_write(ring, 0x3a00161a);
amdgpu_ring_write(ring, 0x0000002e);
break;
- case CHIP_TOPAZ:
case CHIP_CARRIZO:
amdgpu_ring_write(ring, 0x00000002);
amdgpu_ring_write(ring, 0x00000000);
break;
+ case CHIP_TOPAZ:
+ amdgpu_ring_write(ring, adev->gfx.config.num_rbs == 1 ?
+ 0x00000000 : 0x00000002);
+ amdgpu_ring_write(ring, 0x00000000);
+ break;
case CHIP_STONEY:
amdgpu_ring_write(ring, 0x00000000);
amdgpu_ring_write(ring, 0x00000000);
static int iceland_dpm_sw_fini(void *handle)
{
+ struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+
+ release_firmware(adev->pm.fw);
+ adev->pm.fw = NULL;
+
return 0;
}
}
}
+static void sdma_v2_4_free_microcode(struct amdgpu_device *adev)
+{
+ int i;
+ for (i = 0; i < adev->sdma.num_instances; i++) {
+ release_firmware(adev->sdma.instance[i].fw);
+ adev->sdma.instance[i].fw = NULL;
+ }
+}
+
/**
* sdma_v2_4_init_microcode - load ucode images from disk
*
/* Initialize the ring buffer's read and write pointers */
WREG32(mmSDMA0_GFX_RB_RPTR + sdma_offsets[i], 0);
WREG32(mmSDMA0_GFX_RB_WPTR + sdma_offsets[i], 0);
+ WREG32(mmSDMA0_GFX_IB_RPTR + sdma_offsets[i], 0);
+ WREG32(mmSDMA0_GFX_IB_OFFSET + sdma_offsets[i], 0);
/* set the wb address whether it's enabled or not */
WREG32(mmSDMA0_GFX_RB_RPTR_ADDR_HI + sdma_offsets[i],
WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], ib_cntl);
ring->ready = true;
+ }
+ sdma_v2_4_enable(adev, true);
+ for (i = 0; i < adev->sdma.num_instances; i++) {
+ ring = &adev->sdma.instance[i].ring;
r = amdgpu_ring_test_ring(ring);
if (r) {
ring->ready = false;
return -EINVAL;
}
- /* unhalt the MEs */
- sdma_v2_4_enable(adev, true);
+ /* halt the engine before programing */
+ sdma_v2_4_enable(adev, false);
/* start the gfx rings and rlc compute queues */
r = sdma_v2_4_gfx_resume(adev);
for (i = 0; i < adev->sdma.num_instances; i++)
amdgpu_ring_fini(&adev->sdma.instance[i].ring);
+ sdma_v2_4_free_microcode(adev);
return 0;
}
}
}
+static void sdma_v3_0_free_microcode(struct amdgpu_device *adev)
+{
+ int i;
+ for (i = 0; i < adev->sdma.num_instances; i++) {
+ release_firmware(adev->sdma.instance[i].fw);
+ adev->sdma.instance[i].fw = NULL;
+ }
+}
+
/**
* sdma_v3_0_init_microcode - load ucode images from disk
*
/* Initialize the ring buffer's read and write pointers */
WREG32(mmSDMA0_GFX_RB_RPTR + sdma_offsets[i], 0);
WREG32(mmSDMA0_GFX_RB_WPTR + sdma_offsets[i], 0);
+ WREG32(mmSDMA0_GFX_IB_RPTR + sdma_offsets[i], 0);
+ WREG32(mmSDMA0_GFX_IB_OFFSET + sdma_offsets[i], 0);
/* set the wb address whether it's enabled or not */
WREG32(mmSDMA0_GFX_RB_RPTR_ADDR_HI + sdma_offsets[i],
WREG32(mmSDMA0_GFX_IB_CNTL + sdma_offsets[i], ib_cntl);
ring->ready = true;
+ }
+
+ /* unhalt the MEs */
+ sdma_v3_0_enable(adev, true);
+ /* enable sdma ring preemption */
+ sdma_v3_0_ctx_switch_enable(adev, true);
+ for (i = 0; i < adev->sdma.num_instances; i++) {
+ ring = &adev->sdma.instance[i].ring;
r = amdgpu_ring_test_ring(ring);
if (r) {
ring->ready = false;
}
}
- /* unhalt the MEs */
- sdma_v3_0_enable(adev, true);
- /* enable sdma ring preemption */
- sdma_v3_0_ctx_switch_enable(adev, true);
+ /* disble sdma engine before programing it */
+ sdma_v3_0_ctx_switch_enable(adev, false);
+ sdma_v3_0_enable(adev, false);
/* start the gfx rings and rlc compute queues */
r = sdma_v3_0_gfx_resume(adev);
for (i = 0; i < adev->sdma.num_instances; i++)
amdgpu_ring_fini(&adev->sdma.instance[i].ring);
+ sdma_v3_0_free_microcode(adev);
return 0;
}
static int tonga_dpm_sw_fini(void *handle)
{
+ struct amdgpu_device *adev = (struct amdgpu_device *)handle;
+
+ release_firmware(adev->pm.fw);
+ adev->pm.fw = NULL;
+
return 0;
}
int (*hw_init)(void *handle);
/* tears down the hw state */
int (*hw_fini)(void *handle);
+ void (*late_fini)(void *handle);
/* handles IP specific hw/sw changes for suspend */
int (*suspend)(void *handle);
/* handles IP specific hw/sw changes for resume */
enum cgs_ucode_id type,
struct cgs_firmware_info *info);
+typedef int (*cgs_rel_firmware)(struct cgs_device *cgs_device,
+ enum cgs_ucode_id type);
+
typedef int(*cgs_set_powergating_state)(struct cgs_device *cgs_device,
enum amd_ip_block_type block_type,
enum amd_powergating_state state);
cgs_set_camera_voltages_t set_camera_voltages;
/* Firmware Info */
cgs_get_firmware_info get_firmware_info;
+ cgs_rel_firmware rel_firmware;
/* cg pg interface*/
cgs_set_powergating_state set_powergating_state;
cgs_set_clockgating_state set_clockgating_state;
CGS_CALL(set_camera_voltages,dev,mask,voltages)
#define cgs_get_firmware_info(dev, type, info) \
CGS_CALL(get_firmware_info, dev, type, info)
+#define cgs_rel_firmware(dev, type) \
+ CGS_CALL(rel_firmware, dev, type)
#define cgs_set_powergating_state(dev, block_type, state) \
CGS_CALL(set_powergating_state, dev, block_type, state)
#define cgs_set_clockgating_state(dev, block_type, state) \
ret = hwmgr->hwmgr_func->backend_init(hwmgr);
if (ret)
- goto err;
+ goto err1;
pr_info("amdgpu: powerplay initialized\n");
return 0;
+err1:
+ if (hwmgr->pptable_func->pptable_fini)
+ hwmgr->pptable_func->pptable_fini(hwmgr);
err:
pr_err("amdgpu: powerplay initialization failed\n");
return ret;
if (hwmgr->hwmgr_func->backend_fini != NULL)
ret = hwmgr->hwmgr_func->backend_fini(hwmgr);
+ if (hwmgr->pptable_func->pptable_fini)
+ hwmgr->pptable_func->pptable_fini(hwmgr);
+
return ret;
}
pem_unregister_interrupts(eventmgr);
pem_handle_event(eventmgr, AMD_PP_EVENT_UNINITIALIZE, &event_data);
-
- if (eventmgr != NULL)
- kfree(eventmgr);
}
int eventmgr_init(struct pp_instance *handle)
PP_ASSERT_WITH_CODE(false,
"VDDCI is larger than max VDDCI in VDDCI Voltage Table!",
- return vddci_table->entries[i].value);
+ return vddci_table->entries[i-1].value);
}
static int fiji_get_dependency_volt_by_clk(struct pp_hwmgr *hwmgr,
if (hwmgr == NULL || hwmgr->ps == NULL)
return -EINVAL;
+ /* do hwmgr finish*/
+ kfree(hwmgr->backend);
+
+ kfree(hwmgr->start_thermal_controller.function_list);
+
+ kfree(hwmgr->set_temperature_range.function_list);
+
kfree(hwmgr->ps);
kfree(hwmgr);
return 0;
PP_ASSERT_WITH_CODE(false,
"VDDCI is larger than max VDDCI in VDDCI Voltage Table!",
- return vddci_table->entries[i].value);
+ return vddci_table->entries[i-1].value);
}
int phm_find_boot_level(void *table,
if (polaris10_copy_bytes_to_smc(hwmgr->smumgr, pm_fuse_table_offset,
(uint8_t *)&data->power_tune_table,
- sizeof(struct SMU74_Discrete_PmFuses), data->sram_end))
+ (sizeof(struct SMU74_Discrete_PmFuses) - 92), data->sram_end))
PP_ASSERT_WITH_CODE(false,
"Attempt to download PmFuseTable Failed!",
return -EINVAL);
}
}
- /* Initialize Vddc DPM table based on allow Vddc values. And populate corresponding std values. */
- for (i = 0; i < allowed_vdd_sclk_table->count; i++) {
- data->dpm_table.vddc_table.dpm_levels[i].value = allowed_vdd_mclk_table->entries[i].vddc;
- /* tonga_hwmgr->dpm_table.VddcTable.dpm_levels[i].param1 = stdVoltageTable->entries[i].Leakage; */
- /* param1 is for corresponding std voltage */
- data->dpm_table.vddc_table.dpm_levels[i].enabled = 1;
- }
- data->dpm_table.vddc_table.count = allowed_vdd_sclk_table->count;
-
- if (NULL != allowed_vdd_mclk_table) {
- /* Initialize Vddci DPM table based on allow Mclk values */
- for (i = 0; i < allowed_vdd_mclk_table->count; i++) {
- data->dpm_table.vdd_ci_table.dpm_levels[i].value = allowed_vdd_mclk_table->entries[i].vddci;
- data->dpm_table.vdd_ci_table.dpm_levels[i].enabled = 1;
- data->dpm_table.mvdd_table.dpm_levels[i].value = allowed_vdd_mclk_table->entries[i].mvdd;
- data->dpm_table.mvdd_table.dpm_levels[i].enabled = 1;
- }
- data->dpm_table.vdd_ci_table.count = allowed_vdd_mclk_table->count;
- data->dpm_table.mvdd_table.count = allowed_vdd_mclk_table->count;
- }
-
/* setup PCIE gen speed levels*/
tonga_setup_default_pcie_tables(hwmgr);
struct phm_ppt_v1_information *pp_table_information =
(struct phm_ppt_v1_information *)(hwmgr->pptable);
- if (NULL != hwmgr->soft_pp_table) {
- kfree(hwmgr->soft_pp_table);
+ if (NULL != hwmgr->soft_pp_table)
hwmgr->soft_pp_table = NULL;
- }
- if (NULL != pp_table_information->vdd_dep_on_sclk)
- pp_table_information->vdd_dep_on_sclk = NULL;
+ kfree(pp_table_information->vdd_dep_on_sclk);
+ pp_table_information->vdd_dep_on_sclk = NULL;
- if (NULL != pp_table_information->vdd_dep_on_mclk)
- pp_table_information->vdd_dep_on_mclk = NULL;
+ kfree(pp_table_information->vdd_dep_on_mclk);
+ pp_table_information->vdd_dep_on_mclk = NULL;
- if (NULL != pp_table_information->valid_mclk_values)
- pp_table_information->valid_mclk_values = NULL;
+ kfree(pp_table_information->valid_mclk_values);
+ pp_table_information->valid_mclk_values = NULL;
- if (NULL != pp_table_information->valid_sclk_values)
- pp_table_information->valid_sclk_values = NULL;
+ kfree(pp_table_information->valid_sclk_values);
+ pp_table_information->valid_sclk_values = NULL;
- if (NULL != pp_table_information->vddc_lookup_table)
- pp_table_information->vddc_lookup_table = NULL;
+ kfree(pp_table_information->vddc_lookup_table);
+ pp_table_information->vddc_lookup_table = NULL;
- if (NULL != pp_table_information->vddgfx_lookup_table)
- pp_table_information->vddgfx_lookup_table = NULL;
+ kfree(pp_table_information->vddgfx_lookup_table);
+ pp_table_information->vddgfx_lookup_table = NULL;
- if (NULL != pp_table_information->mm_dep_table)
- pp_table_information->mm_dep_table = NULL;
+ kfree(pp_table_information->mm_dep_table);
+ pp_table_information->mm_dep_table = NULL;
- if (NULL != pp_table_information->cac_dtp_table)
- pp_table_information->cac_dtp_table = NULL;
+ kfree(pp_table_information->cac_dtp_table);
+ pp_table_information->cac_dtp_table = NULL;
- if (NULL != hwmgr->dyn_state.cac_dtp_table)
- hwmgr->dyn_state.cac_dtp_table = NULL;
+ kfree(hwmgr->dyn_state.cac_dtp_table);
+ hwmgr->dyn_state.cac_dtp_table = NULL;
- if (NULL != pp_table_information->ppm_parameter_table)
- pp_table_information->ppm_parameter_table = NULL;
+ kfree(pp_table_information->ppm_parameter_table);
+ pp_table_information->ppm_parameter_table = NULL;
- if (NULL != pp_table_information->pcie_table)
- pp_table_information->pcie_table = NULL;
+ kfree(pp_table_information->pcie_table);
+ pp_table_information->pcie_table = NULL;
- if (NULL != hwmgr->pptable) {
- kfree(hwmgr->pptable);
- hwmgr->pptable = NULL;
- }
+ kfree(hwmgr->pptable);
+ hwmgr->pptable = NULL;
return result;
}
static int fiji_smu_fini(struct pp_smumgr *smumgr)
{
+ struct fiji_smumgr *priv = (struct fiji_smumgr *)(smumgr->backend);
+
+ smu_free_memory(smumgr->device, (void *)priv->header_buffer.handle);
+
if (smumgr->backend) {
kfree(smumgr->backend);
smumgr->backend = NULL;
}
+
+ cgs_rel_firmware(smumgr->device, CGS_UCODE_ID_SMU);
return 0;
}
kfree(smumgr->backend);
smumgr->backend = NULL;
}
+ cgs_rel_firmware(smumgr->device, CGS_UCODE_ID_SMU);
return 0;
}
int smum_fini(struct pp_smumgr *smumgr)
{
+ kfree(smumgr->device);
kfree(smumgr);
return 0;
}
static int tonga_smu_fini(struct pp_smumgr *smumgr)
{
+ struct tonga_smumgr *priv = (struct tonga_smumgr *)(smumgr->backend);
+
+ smu_free_memory(smumgr->device, (void *)priv->smu_buffer.handle);
+ smu_free_memory(smumgr->device, (void *)priv->header_buffer.handle);
+
if (smumgr->backend != NULL) {
kfree(smumgr->backend);
smumgr->backend = NULL;
}
+
+ cgs_rel_firmware(smumgr->device, CGS_UCODE_ID_SMU);
return 0;
}
*
*/
+static void hdlcd_crtc_cleanup(struct drm_crtc *crtc)
+{
+ struct hdlcd_drm_private *hdlcd = crtc_to_hdlcd_priv(crtc);
+
+ /* stop the controller on cleanup */
+ hdlcd_write(hdlcd, HDLCD_REG_COMMAND, 0);
+ drm_crtc_cleanup(crtc);
+}
+
static const struct drm_crtc_funcs hdlcd_crtc_funcs = {
- .destroy = drm_crtc_cleanup,
+ .destroy = hdlcd_crtc_cleanup,
.set_config = drm_atomic_helper_set_config,
.page_flip = drm_atomic_helper_page_flip,
.reset = drm_atomic_helper_crtc_reset,
struct hdlcd_drm_private *hdlcd = crtc_to_hdlcd_priv(crtc);
struct drm_display_mode *m = &crtc->state->adjusted_mode;
struct videomode vm;
- unsigned int polarities, line_length, err;
+ unsigned int polarities, err;
vm.vfront_porch = m->crtc_vsync_start - m->crtc_vdisplay;
vm.vback_porch = m->crtc_vtotal - m->crtc_vsync_end;
if (m->flags & DRM_MODE_FLAG_PVSYNC)
polarities |= HDLCD_POLARITY_VSYNC;
- line_length = crtc->primary->state->fb->pitches[0];
-
/* Allow max number of outstanding requests and largest burst size */
hdlcd_write(hdlcd, HDLCD_REG_BUS_OPTIONS,
HDLCD_BUS_MAX_OUTSTAND | HDLCD_BUS_BURST_16);
- hdlcd_write(hdlcd, HDLCD_REG_FB_LINE_LENGTH, line_length);
- hdlcd_write(hdlcd, HDLCD_REG_FB_LINE_PITCH, line_length);
- hdlcd_write(hdlcd, HDLCD_REG_FB_LINE_COUNT, m->crtc_vdisplay - 1);
hdlcd_write(hdlcd, HDLCD_REG_V_DATA, m->crtc_vdisplay - 1);
hdlcd_write(hdlcd, HDLCD_REG_V_BACK_PORCH, vm.vback_porch - 1);
hdlcd_write(hdlcd, HDLCD_REG_V_FRONT_PORCH, vm.vfront_porch - 1);
hdlcd_write(hdlcd, HDLCD_REG_V_SYNC, vm.vsync_len - 1);
+ hdlcd_write(hdlcd, HDLCD_REG_H_DATA, m->crtc_hdisplay - 1);
hdlcd_write(hdlcd, HDLCD_REG_H_BACK_PORCH, vm.hback_porch - 1);
hdlcd_write(hdlcd, HDLCD_REG_H_FRONT_PORCH, vm.hfront_porch - 1);
hdlcd_write(hdlcd, HDLCD_REG_H_SYNC, vm.hsync_len - 1);
- hdlcd_write(hdlcd, HDLCD_REG_H_DATA, m->crtc_hdisplay - 1);
hdlcd_write(hdlcd, HDLCD_REG_POLARITIES, polarities);
err = hdlcd_set_pxl_fmt(crtc);
struct hdlcd_drm_private *hdlcd = crtc_to_hdlcd_priv(crtc);
clk_prepare_enable(hdlcd->clk);
+ hdlcd_crtc_mode_set_nofb(crtc);
hdlcd_write(hdlcd, HDLCD_REG_COMMAND, 1);
- drm_crtc_vblank_on(crtc);
}
static void hdlcd_crtc_disable(struct drm_crtc *crtc)
{
struct hdlcd_drm_private *hdlcd = crtc_to_hdlcd_priv(crtc);
- if (!crtc->primary->fb)
+ if (!crtc->state->active)
return;
- clk_disable_unprepare(hdlcd->clk);
hdlcd_write(hdlcd, HDLCD_REG_COMMAND, 0);
- drm_crtc_vblank_off(crtc);
+ clk_disable_unprepare(hdlcd->clk);
}
static int hdlcd_crtc_atomic_check(struct drm_crtc *crtc,
static void hdlcd_crtc_atomic_begin(struct drm_crtc *crtc,
struct drm_crtc_state *state)
{
- struct hdlcd_drm_private *hdlcd = crtc_to_hdlcd_priv(crtc);
- unsigned long flags;
-
- if (crtc->state->event) {
- struct drm_pending_vblank_event *event = crtc->state->event;
+ struct drm_pending_vblank_event *event = crtc->state->event;
+ if (event) {
crtc->state->event = NULL;
- event->pipe = drm_crtc_index(crtc);
-
- WARN_ON(drm_crtc_vblank_get(crtc) != 0);
- spin_lock_irqsave(&crtc->dev->event_lock, flags);
- list_add_tail(&event->base.link, &hdlcd->event_list);
- spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
+ spin_lock_irq(&crtc->dev->event_lock);
+ if (drm_crtc_vblank_get(crtc) == 0)
+ drm_crtc_arm_vblank_event(crtc, event);
+ else
+ drm_crtc_send_vblank_event(crtc, event);
+ spin_unlock_irq(&crtc->dev->event_lock);
}
}
static int hdlcd_plane_atomic_check(struct drm_plane *plane,
struct drm_plane_state *state)
{
+ u32 src_w, src_h;
+
+ src_w = state->src_w >> 16;
+ src_h = state->src_h >> 16;
+
+ /* we can't do any scaling of the plane source */
+ if ((src_w != state->crtc_w) || (src_h != state->crtc_h))
+ return -EINVAL;
+
return 0;
}
{
struct hdlcd_drm_private *hdlcd;
struct drm_gem_cma_object *gem;
+ unsigned int depth, bpp;
+ u32 src_w, src_h, dest_w, dest_h;
dma_addr_t scanout_start;
- if (!plane->state->crtc || !plane->state->fb)
+ if (!plane->state->fb)
return;
- hdlcd = crtc_to_hdlcd_priv(plane->state->crtc);
+ drm_fb_get_bpp_depth(plane->state->fb->pixel_format, &depth, &bpp);
+ src_w = plane->state->src_w >> 16;
+ src_h = plane->state->src_h >> 16;
+ dest_w = plane->state->crtc_w;
+ dest_h = plane->state->crtc_h;
gem = drm_fb_cma_get_gem_obj(plane->state->fb, 0);
- scanout_start = gem->paddr;
+ scanout_start = gem->paddr + plane->state->fb->offsets[0] +
+ plane->state->crtc_y * plane->state->fb->pitches[0] +
+ plane->state->crtc_x * bpp / 8;
+
+ hdlcd = plane->dev->dev_private;
+ hdlcd_write(hdlcd, HDLCD_REG_FB_LINE_LENGTH, plane->state->fb->pitches[0]);
+ hdlcd_write(hdlcd, HDLCD_REG_FB_LINE_PITCH, plane->state->fb->pitches[0]);
+ hdlcd_write(hdlcd, HDLCD_REG_FB_LINE_COUNT, dest_h - 1);
hdlcd_write(hdlcd, HDLCD_REG_FB_BASE, scanout_start);
}
static const struct drm_plane_helper_funcs hdlcd_plane_helper_funcs = {
- .prepare_fb = NULL,
- .cleanup_fb = NULL,
.atomic_check = hdlcd_plane_atomic_check,
.atomic_update = hdlcd_plane_atomic_update,
};
return plane;
}
-void hdlcd_crtc_suspend(struct drm_crtc *crtc)
-{
- hdlcd_crtc_disable(crtc);
-}
-
-void hdlcd_crtc_resume(struct drm_crtc *crtc)
-{
- hdlcd_crtc_enable(crtc);
-}
-
int hdlcd_setup_crtc(struct drm_device *drm)
{
struct hdlcd_drm_private *hdlcd = drm->dev_private;
atomic_set(&hdlcd->dma_end_count, 0);
#endif
- INIT_LIST_HEAD(&hdlcd->event_list);
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hdlcd->mmio = devm_ioremap_resource(drm->dev, res);
if (IS_ERR(hdlcd->mmio)) {
goto setup_fail;
}
- pm_runtime_enable(drm->dev);
-
- pm_runtime_get_sync(drm->dev);
ret = drm_irq_install(drm, platform_get_irq(pdev, 0));
- pm_runtime_put_sync(drm->dev);
if (ret < 0) {
DRM_ERROR("failed to install IRQ handler\n");
goto irq_fail;
atomic_inc(&hdlcd->vsync_count);
#endif
- if (irq_status & HDLCD_INTERRUPT_VSYNC) {
- bool events_sent = false;
- unsigned long flags;
- struct drm_pending_vblank_event *e, *t;
-
+ if (irq_status & HDLCD_INTERRUPT_VSYNC)
drm_crtc_handle_vblank(&hdlcd->crtc);
- spin_lock_irqsave(&drm->event_lock, flags);
- list_for_each_entry_safe(e, t, &hdlcd->event_list, base.link) {
- list_del(&e->base.link);
- drm_crtc_send_vblank_event(&hdlcd->crtc, e);
- events_sent = true;
- }
- if (events_sent)
- drm_crtc_vblank_put(&hdlcd->crtc);
- spin_unlock_irqrestore(&drm->event_lock, flags);
- }
-
/* acknowledge interrupt(s) */
hdlcd_write(hdlcd, HDLCD_REG_INT_CLEAR, irq_status);
static struct drm_info_list hdlcd_debugfs_list[] = {
{ "interrupt_count", hdlcd_show_underrun_count, 0 },
{ "clocks", hdlcd_show_pxlclock, 0 },
+ { "fb", drm_fb_cma_debugfs_show, 0 },
};
static int hdlcd_debugfs_init(struct drm_minor *minor)
return -ENOMEM;
drm->dev_private = hdlcd;
+ dev_set_drvdata(dev, drm);
+
hdlcd_setup_mode_config(drm);
ret = hdlcd_load(drm, 0);
if (ret)
if (ret)
goto err_unload;
- dev_set_drvdata(dev, drm);
-
ret = component_bind_all(dev, drm);
if (ret) {
DRM_ERROR("Failed to bind all components\n");
goto err_unregister;
}
+ ret = pm_runtime_set_active(dev);
+ if (ret)
+ goto err_pm_active;
+
+ pm_runtime_enable(dev);
+
ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
if (ret < 0) {
DRM_ERROR("failed to initialise vblank\n");
drm_mode_config_cleanup(drm);
drm_vblank_cleanup(drm);
err_vblank:
+ pm_runtime_disable(drm->dev);
+err_pm_active:
component_unbind_all(dev, drm);
err_unregister:
drm_dev_unregister(drm);
err_unload:
- pm_runtime_get_sync(drm->dev);
drm_irq_uninstall(drm);
- pm_runtime_put_sync(drm->dev);
- pm_runtime_disable(drm->dev);
of_reserved_mem_device_release(drm->dev);
err_free:
+ dev_set_drvdata(dev, NULL);
drm_dev_unref(drm);
return ret;
static int __maybe_unused hdlcd_pm_suspend(struct device *dev)
{
struct drm_device *drm = dev_get_drvdata(dev);
- struct drm_crtc *crtc;
+ struct hdlcd_drm_private *hdlcd = drm ? drm->dev_private : NULL;
- if (pm_runtime_suspended(dev))
+ if (!hdlcd)
return 0;
- drm_modeset_lock_all(drm);
- list_for_each_entry(crtc, &drm->mode_config.crtc_list, head)
- hdlcd_crtc_suspend(crtc);
- drm_modeset_unlock_all(drm);
+ drm_kms_helper_poll_disable(drm);
+
+ hdlcd->state = drm_atomic_helper_suspend(drm);
+ if (IS_ERR(hdlcd->state)) {
+ drm_kms_helper_poll_enable(drm);
+ return PTR_ERR(hdlcd->state);
+ }
+
return 0;
}
static int __maybe_unused hdlcd_pm_resume(struct device *dev)
{
struct drm_device *drm = dev_get_drvdata(dev);
- struct drm_crtc *crtc;
+ struct hdlcd_drm_private *hdlcd = drm ? drm->dev_private : NULL;
- if (!pm_runtime_suspended(dev))
+ if (!hdlcd)
return 0;
- drm_modeset_lock_all(drm);
- list_for_each_entry(crtc, &drm->mode_config.crtc_list, head)
- hdlcd_crtc_resume(crtc);
- drm_modeset_unlock_all(drm);
+ drm_atomic_helper_resume(drm, hdlcd->state);
+ drm_kms_helper_poll_enable(drm);
+ pm_runtime_set_active(dev);
+
return 0;
}
void __iomem *mmio;
struct clk *clk;
struct drm_fbdev_cma *fbdev;
- struct drm_framebuffer *fb;
- struct list_head event_list;
struct drm_crtc crtc;
struct drm_plane *plane;
+ struct drm_atomic_state *state;
#ifdef CONFIG_DEBUG_FS
atomic_t buffer_underrun_count;
atomic_t bus_error_count;
int hdlcd_setup_crtc(struct drm_device *dev);
void hdlcd_set_scanout(struct hdlcd_drm_private *hdlcd);
-void hdlcd_crtc_suspend(struct drm_crtc *crtc);
-void hdlcd_crtc_resume(struct drm_crtc *crtc);
#endif /* __HDLCD_DRV_H__ */
{
struct atmel_hlcdc_crtc_state *state;
- if (crtc->state && crtc->state->mode_blob)
- drm_property_unreference_blob(crtc->state->mode_blob);
-
if (crtc->state) {
+ __drm_atomic_helper_crtc_destroy_state(crtc->state);
state = drm_crtc_state_to_atmel_hlcdc_crtc_state(crtc->state);
kfree(state);
+ crtc->state = NULL;
}
state = kzalloc(sizeof(*state), GFP_KERNEL);
return NULL;
state = kmalloc(sizeof(*state), GFP_KERNEL);
- if (state)
- __drm_atomic_helper_crtc_duplicate_state(crtc, &state->base);
+ if (!state)
+ return NULL;
+ __drm_atomic_helper_crtc_duplicate_state(crtc, &state->base);
cur = drm_crtc_state_to_atmel_hlcdc_crtc_state(crtc->state);
state->output_mode = cur->output_mode;
drm_property_unreference_blob(state->mode_blob);
state->mode_blob = NULL;
+ memset(&state->mode, 0, sizeof(state->mode));
+
if (blob) {
if (blob->length != sizeof(struct drm_mode_modeinfo) ||
drm_mode_convert_umode(&state->mode,
DRM_DEBUG_ATOMIC("Set [MODE:%s] for CRTC state %p\n",
state->mode.name, state);
} else {
- memset(&state->mode, 0, sizeof(state->mode));
state->enable = false;
DRM_DEBUG_ATOMIC("Set [NOMODE] for CRTC state %p\n",
state);
goto out;
}
- drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V);
-
/*
* Check whether the primary plane supports the fb pixel format.
* Drivers not implementing the universal planes API use a
if (value == 0)
return true;
- return _object_find(property->dev, value, property->values[0]) != NULL;
+ *ref = _object_find(property->dev, value, property->values[0]);
+ return *ref != NULL;
}
for (i = 0; i < property->num_values; i++)
err_fb_info_destroy:
drm_fb_helper_release_fbi(helper);
err_gem_free_object:
- dev->driver->gem_free_object(&obj->base);
+ drm_gem_object_unreference_unlocked(&obj->base);
return ret;
}
EXPORT_SYMBOL(drm_fbdev_cma_create_with_funcs);
return cma_obj;
error:
- drm->driver->gem_free_object(&cma_obj->base);
+ drm_gem_object_unreference_unlocked(&cma_obj->base);
return ERR_PTR(ret);
}
EXPORT_SYMBOL_GPL(drm_gem_cma_create);
* and handle has the id what user can see.
*/
ret = drm_gem_handle_create(file_priv, gem_obj, handle);
- if (ret)
- goto err_handle_create;
-
/* drop reference from allocate - handle holds it now. */
drm_gem_object_unreference_unlocked(gem_obj);
+ if (ret)
+ return ERR_PTR(ret);
return cma_obj;
-
-err_handle_create:
- drm->driver->gem_free_object(gem_obj);
-
- return ERR_PTR(ret);
}
/**
if (out->status != MODE_OK)
goto out;
+ drm_mode_set_crtcinfo(out, CRTC_INTERLACE_HALVE_V);
+
ret = 0;
out:
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
- .cache_type = REGCACHE_RBTREE,
+ .cache_type = REGCACHE_FLAT,
.volatile_reg = fsl_dcu_drm_is_volatile_reg,
+ .max_register = 0x11fc,
};
static int fsl_dcu_drm_irq_init(struct drm_device *dev)
return NULL;
}
-int imx_drm_set_bus_format_pins(struct drm_encoder *encoder, u32 bus_format,
- int hsync_pin, int vsync_pin)
+int imx_drm_set_bus_config(struct drm_encoder *encoder, u32 bus_format,
+ int hsync_pin, int vsync_pin, u32 bus_flags)
{
struct imx_drm_crtc_helper_funcs *helper;
struct imx_drm_crtc *imx_crtc;
helper = &imx_crtc->imx_drm_helper_funcs;
if (helper->set_interface_pix_fmt)
return helper->set_interface_pix_fmt(encoder->crtc,
- bus_format, hsync_pin, vsync_pin);
+ bus_format, hsync_pin, vsync_pin,
+ bus_flags);
return 0;
}
-EXPORT_SYMBOL_GPL(imx_drm_set_bus_format_pins);
+EXPORT_SYMBOL_GPL(imx_drm_set_bus_config);
int imx_drm_set_bus_format(struct drm_encoder *encoder, u32 bus_format)
{
- return imx_drm_set_bus_format_pins(encoder, bus_format, 2, 3);
+ return imx_drm_set_bus_config(encoder, bus_format, 2, 3,
+ DRM_BUS_FLAG_DE_HIGH |
+ DRM_BUS_FLAG_PIXDATA_NEGEDGE);
}
EXPORT_SYMBOL_GPL(imx_drm_set_bus_format);
int (*enable_vblank)(struct drm_crtc *crtc);
void (*disable_vblank)(struct drm_crtc *crtc);
int (*set_interface_pix_fmt)(struct drm_crtc *crtc,
- u32 bus_format, int hsync_pin, int vsync_pin);
+ u32 bus_format, int hsync_pin, int vsync_pin,
+ u32 bus_flags);
const struct drm_crtc_helper_funcs *crtc_helper_funcs;
const struct drm_crtc_funcs *crtc_funcs;
};
struct drm_gem_cma_object *imx_drm_fb_get_obj(struct drm_framebuffer *fb);
-int imx_drm_set_bus_format_pins(struct drm_encoder *encoder,
- u32 bus_format, int hsync_pin, int vsync_pin);
+int imx_drm_set_bus_config(struct drm_encoder *encoder, u32 bus_format,
+ int hsync_pin, int vsync_pin, u32 bus_flags);
int imx_drm_set_bus_format(struct drm_encoder *encoder,
u32 bus_format);
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/of_device.h>
#include <linux/of_graph.h>
+#include <video/of_display_timing.h>
#include <video/of_videomode.h>
#include <linux/regmap.h>
#include <linux/videodev2.h>
struct drm_encoder encoder;
struct drm_panel *panel;
struct device_node *child;
+ struct i2c_adapter *ddc;
int chno;
void *edid;
int edid_len;
return num_modes;
}
+ if (!imx_ldb_ch->edid && imx_ldb_ch->ddc)
+ imx_ldb_ch->edid = drm_get_edid(connector, imx_ldb_ch->ddc);
+
if (imx_ldb_ch->edid) {
drm_mode_connector_update_edid_property(connector,
imx_ldb_ch->edid);
for_each_child_of_node(np, child) {
struct imx_ldb_channel *channel;
- struct device_node *port;
+ struct device_node *ddc_node;
+ struct device_node *ep;
ret = of_property_read_u32(child, "reg", &i);
if (ret || i < 0 || i > 1)
* The output port is port@4 with an external 4-port mux or
* port@2 with the internal 2-port mux.
*/
- port = of_graph_get_port_by_id(child, imx_ldb->lvds_mux ? 4 : 2);
- if (port) {
- struct device_node *endpoint, *remote;
-
- endpoint = of_get_child_by_name(port, "endpoint");
- if (endpoint) {
- remote = of_graph_get_remote_port_parent(endpoint);
- if (remote)
- channel->panel = of_drm_find_panel(remote);
- else
- return -EPROBE_DEFER;
- if (!channel->panel) {
- dev_err(dev, "panel not found: %s\n",
- remote->full_name);
- return -EPROBE_DEFER;
- }
+ ep = of_graph_get_endpoint_by_regs(child,
+ imx_ldb->lvds_mux ? 4 : 2,
+ -1);
+ if (ep) {
+ struct device_node *remote;
+
+ remote = of_graph_get_remote_port_parent(ep);
+ of_node_put(ep);
+ if (remote)
+ channel->panel = of_drm_find_panel(remote);
+ else
+ return -EPROBE_DEFER;
+ of_node_put(remote);
+ if (!channel->panel) {
+ dev_err(dev, "panel not found: %s\n",
+ remote->full_name);
+ return -EPROBE_DEFER;
}
}
- edidp = of_get_property(child, "edid", &channel->edid_len);
- if (edidp) {
- channel->edid = kmemdup(edidp, channel->edid_len,
- GFP_KERNEL);
- } else if (!channel->panel) {
- ret = of_get_drm_display_mode(child, &channel->mode, 0);
- if (!ret)
- channel->mode_valid = 1;
+ ddc_node = of_parse_phandle(child, "ddc-i2c-bus", 0);
+ if (ddc_node) {
+ channel->ddc = of_find_i2c_adapter_by_node(ddc_node);
+ of_node_put(ddc_node);
+ if (!channel->ddc) {
+ dev_warn(dev, "failed to get ddc i2c adapter\n");
+ return -EPROBE_DEFER;
+ }
+ }
+
+ if (!channel->ddc) {
+ /* if no DDC available, fallback to hardcoded EDID */
+ dev_dbg(dev, "no ddc available\n");
+
+ edidp = of_get_property(child, "edid",
+ &channel->edid_len);
+ if (edidp) {
+ channel->edid = kmemdup(edidp,
+ channel->edid_len,
+ GFP_KERNEL);
+ } else if (!channel->panel) {
+ /* fallback to display-timings node */
+ ret = of_get_drm_display_mode(child,
+ &channel->mode,
+ OF_USE_NATIVE_MODE);
+ if (!ret)
+ channel->mode_valid = 1;
+ }
}
channel->bus_format = of_get_bus_format(dev, child);
channel->encoder.funcs->destroy(&channel->encoder);
kfree(channel->edid);
+ i2c_put_adapter(channel->ddc);
}
}
switch (tve->mode) {
case TVE_MODE_VGA:
- imx_drm_set_bus_format_pins(encoder, MEDIA_BUS_FMT_GBR888_1X24,
- tve->hsync_pin, tve->vsync_pin);
+ imx_drm_set_bus_config(encoder, MEDIA_BUS_FMT_GBR888_1X24,
+ tve->hsync_pin, tve->vsync_pin,
+ DRM_BUS_FLAG_DE_HIGH |
+ DRM_BUS_FLAG_PIXDATA_NEGEDGE);
break;
case TVE_MODE_TVOUT:
imx_drm_set_bus_format(encoder, MEDIA_BUS_FMT_YUV8_1X24);
struct ipu_flip_work *flip_work;
int irq;
u32 bus_format;
+ u32 bus_flags;
int di_hsync_pin;
int di_vsync_pin;
};
else
sig_cfg.clkflags = 0;
- sig_cfg.enable_pol = 1;
- sig_cfg.clk_pol = 0;
+ sig_cfg.enable_pol = !(ipu_crtc->bus_flags & DRM_BUS_FLAG_DE_LOW);
+ /* Default to driving pixel data on negative clock edges */
+ sig_cfg.clk_pol = !!(ipu_crtc->bus_flags &
+ DRM_BUS_FLAG_PIXDATA_POSEDGE);
sig_cfg.bus_format = ipu_crtc->bus_format;
sig_cfg.v_to_h_sync = 0;
sig_cfg.hsync_pin = ipu_crtc->di_hsync_pin;
}
static int ipu_set_interface_pix_fmt(struct drm_crtc *crtc,
- u32 bus_format, int hsync_pin, int vsync_pin)
+ u32 bus_format, int hsync_pin, int vsync_pin, u32 bus_flags)
{
struct ipu_crtc *ipu_crtc = to_ipu_crtc(crtc);
ipu_crtc->bus_format = bus_format;
+ ipu_crtc->bus_flags = bus_flags;
ipu_crtc->di_hsync_pin = hsync_pin;
ipu_crtc->di_vsync_pin = vsync_pin;
DRM_FORMAT_RGBX8888,
DRM_FORMAT_BGRA8888,
DRM_FORMAT_BGRA8888,
+ DRM_FORMAT_UYVY,
+ DRM_FORMAT_VYUY,
DRM_FORMAT_YUYV,
DRM_FORMAT_YVYU,
DRM_FORMAT_YUV420,
if (crtc != plane->crtc)
dev_dbg(plane->dev->dev, "crtc change: %p -> %p\n",
plane->crtc, crtc);
- plane->crtc = crtc;
if (!ipu_plane->enabled)
ipu_plane_enable(ipu_plane);
kfree(ipu_plane);
}
-static struct drm_plane_funcs ipu_plane_funcs = {
+static const struct drm_plane_funcs ipu_plane_funcs = {
.update_plane = ipu_update_plane,
.disable_plane = ipu_disable_plane,
.destroy = ipu_plane_destroy,
void *edid;
int edid_len;
u32 bus_format;
- int mode_valid;
struct drm_display_mode mode;
struct drm_panel *panel;
};
num_modes = drm_add_edid_modes(connector, imxpd->edid);
}
- if (imxpd->mode_valid) {
- struct drm_display_mode *mode = drm_mode_create(connector->dev);
-
- if (!mode)
- return -EINVAL;
- drm_mode_copy(mode, &imxpd->mode);
- mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
- drm_mode_probed_add(connector, mode);
- num_modes++;
- }
-
if (np) {
struct drm_display_mode *mode = drm_mode_create(connector->dev);
static void imx_pd_encoder_prepare(struct drm_encoder *encoder)
{
struct imx_parallel_display *imxpd = enc_to_imxpd(encoder);
-
- imx_drm_set_bus_format(encoder, imxpd->bus_format);
+ imx_drm_set_bus_config(encoder, imxpd->bus_format, 2, 3,
+ imxpd->connector.display_info.bus_flags);
}
static void imx_pd_encoder_commit(struct drm_encoder *encoder)
{
struct drm_device *drm = data;
struct device_node *np = dev->of_node;
- struct device_node *port;
+ struct device_node *ep;
const u8 *edidp;
struct imx_parallel_display *imxpd;
int ret;
}
/* port@1 is the output port */
- port = of_graph_get_port_by_id(np, 1);
- if (port) {
- struct device_node *endpoint, *remote;
-
- endpoint = of_get_child_by_name(port, "endpoint");
- if (endpoint) {
- remote = of_graph_get_remote_port_parent(endpoint);
- if (remote)
- imxpd->panel = of_drm_find_panel(remote);
- if (!imxpd->panel)
- return -EPROBE_DEFER;
+ ep = of_graph_get_endpoint_by_regs(np, 1, -1);
+ if (ep) {
+ struct device_node *remote;
+
+ remote = of_graph_get_remote_port_parent(ep);
+ of_node_put(ep);
+ if (remote) {
+ imxpd->panel = of_drm_find_panel(remote);
+ of_node_put(remote);
}
+ if (!imxpd->panel)
+ return -EPROBE_DEFER;
}
imxpd->dev = dev;
unsigned long pll_rate;
unsigned int factor;
- if (!dpi) {
- dev_err(dpi->dev, "invalid argument\n");
- return -EINVAL;
- }
-
pix_rate = 1000UL * mode->clock;
if (mode->clock <= 74000)
factor = 8 * 3;
{
drm_encoder_cleanup(&dsi->encoder);
/* Skip connector cleanup if creation was delegated to the bridge */
- if (dsi->conn.dev) {
- drm_connector_unregister(&dsi->conn);
+ if (dsi->conn.dev)
drm_connector_cleanup(&dsi->conn);
- }
}
static void mtk_dsi_ddp_start(struct mtk_ddp_comp *comp)
}
}
- fvv = pllreffreq * testn / testm;
+ fvv = pllreffreq * (n + 1) / (m + 1);
fvv = (fvv - 800000) / 50000;
if (fvv > 15)
WREG_DAC(MGA1064_PIX_PLLC_M, m);
WREG_DAC(MGA1064_PIX_PLLC_N, n);
WREG_DAC(MGA1064_PIX_PLLC_P, p);
+
+ if (mdev->unique_rev_id >= 0x04) {
+ WREG_DAC(0x1a, 0x09);
+ msleep(20);
+ WREG_DAC(0x1a, 0x01);
+
+ }
+
return 0;
}
}
adreno_gpu->memptrs = msm_gem_vaddr(adreno_gpu->memptrs_bo);
- if (!adreno_gpu->memptrs) {
+ if (IS_ERR(adreno_gpu->memptrs)) {
dev_err(drm->dev, "could not vmap memptrs\n");
return -ENOMEM;
}
dev->mode_config.fb_base = paddr;
fbi->screen_base = msm_gem_vaddr_locked(fbdev->bo);
+ if (IS_ERR(fbi->screen_base)) {
+ ret = PTR_ERR(fbi->screen_base);
+ goto fail_unlock;
+ }
fbi->screen_size = fbdev->bo->size;
fbi->fix.smem_start = paddr;
fbi->fix.smem_len = fbdev->bo->size;
return ERR_CAST(pages);
msm_obj->vaddr = vmap(pages, obj->size >> PAGE_SHIFT,
VM_MAP, pgprot_writecombine(PAGE_KERNEL));
+ if (msm_obj->vaddr == NULL)
+ return ERR_PTR(-ENOMEM);
}
return msm_obj->vaddr;
}
submit->dev = dev;
submit->gpu = gpu;
+ submit->fence = NULL;
submit->pid = get_pid(task_pid(current));
/* initially, until copy_from_user() and bo lookup succeeds: */
submit->nr_bos = 0;
submit->nr_cmds = 0;
+ INIT_LIST_HEAD(&submit->node);
INIT_LIST_HEAD(&submit->bo_list);
ww_acquire_init(&submit->ticket, &reservation_ww_class);
void __user *userptr =
u64_to_user_ptr(args->bos + (i * sizeof(submit_bo)));
+ /* make sure we don't have garbage flags, in case we hit
+ * error path before flags is initialized:
+ */
+ submit->bos[i].flags = 0;
+
ret = copy_from_user(&submit_bo, userptr, sizeof(submit_bo));
if (ret) {
ret = -EFAULT;
struct msm_gem_object *obj = submit->bos[idx].obj;
const char *buf = msm_gem_vaddr_locked(&obj->base);
+ if (IS_ERR(buf))
+ continue;
+
buf += iova - submit->bos[idx].iova;
rd_write_section(rd, RD_GPUADDR,
}
ring->start = msm_gem_vaddr_locked(ring->bo);
+ if (IS_ERR(ring->start)) {
+ ret = PTR_ERR(ring->start);
+ goto fail;
+ }
ring->end = ring->start + (size / 4);
ring->cur = ring->start;
NVKM_SUBDEV_MC,
NVKM_SUBDEV_BUS,
NVKM_SUBDEV_TIMER,
+ NVKM_SUBDEV_INSTMEM,
NVKM_SUBDEV_FB,
NVKM_SUBDEV_LTC,
- NVKM_SUBDEV_INSTMEM,
NVKM_SUBDEV_MMU,
NVKM_SUBDEV_BAR,
NVKM_SUBDEV_PMU,
u8 *ver, u8 *hdr, u8 *cnt, u8 *len, struct nvbios_outp *);
struct nvbios_ocfg {
- u16 match;
+ u8 proto;
+ u8 flags;
u16 clkcmp[2];
};
u8 *ver, u8 *hdr, u8 *cnt, u8 *len);
u16 nvbios_ocfg_parse(struct nvkm_bios *, u16 outp, u8 idx,
u8 *ver, u8 *hdr, u8 *cnt, u8 *len, struct nvbios_ocfg *);
-u16 nvbios_ocfg_match(struct nvkm_bios *, u16 outp, u16 type,
+u16 nvbios_ocfg_match(struct nvkm_bios *, u16 outp, u8 proto, u8 flags,
u8 *ver, u8 *hdr, u8 *cnt, u8 *len, struct nvbios_ocfg *);
u16 nvbios_oclk_match(struct nvkm_bios *, u16 cmp, u32 khz);
#endif
if (ret)
goto fini;
+ fbcon->helper.fbdev->pixmap.buf_align = 4;
return 0;
fini:
uint32_t fg;
uint32_t bg;
uint32_t dsize;
- uint32_t width;
uint32_t *data = (uint32_t *)image->data;
int ret;
if (ret)
return ret;
- width = ALIGN(image->width, 8);
- dsize = ALIGN(width * image->height, 32) >> 5;
-
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
fg = ((uint32_t *) info->pseudo_palette)[image->fg_color];
((image->dx + image->width) & 0xffff));
OUT_RING(chan, bg);
OUT_RING(chan, fg);
- OUT_RING(chan, (image->height << 16) | width);
+ OUT_RING(chan, (image->height << 16) | image->width);
OUT_RING(chan, (image->height << 16) | image->width);
OUT_RING(chan, (image->dy << 16) | (image->dx & 0xffff));
+ dsize = ALIGN(image->width * image->height, 32) >> 5;
while (dsize) {
int iter_len = dsize > 128 ? 128 : dsize;
struct nouveau_fbdev *nfbdev = info->par;
struct nouveau_drm *drm = nouveau_drm(nfbdev->dev);
struct nouveau_channel *chan = drm->channel;
- uint32_t width, dwords, *data = (uint32_t *)image->data;
+ uint32_t dwords, *data = (uint32_t *)image->data;
uint32_t mask = ~(~0 >> (32 - info->var.bits_per_pixel));
uint32_t *palette = info->pseudo_palette;
int ret;
if (ret)
return ret;
- width = ALIGN(image->width, 32);
- dwords = (width * image->height) >> 5;
-
BEGIN_NV04(chan, NvSub2D, 0x0814, 2);
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
OUT_RING(chan, 0);
OUT_RING(chan, image->dy);
+ dwords = ALIGN(image->width * image->height, 32) >> 5;
while (dwords) {
int push = dwords > 2047 ? 2047 : dwords;
struct nouveau_fbdev *nfbdev = info->par;
struct nouveau_drm *drm = nouveau_drm(nfbdev->dev);
struct nouveau_channel *chan = drm->channel;
- uint32_t width, dwords, *data = (uint32_t *)image->data;
+ uint32_t dwords, *data = (uint32_t *)image->data;
uint32_t mask = ~(~0 >> (32 - info->var.bits_per_pixel));
uint32_t *palette = info->pseudo_palette;
int ret;
if (ret)
return ret;
- width = ALIGN(image->width, 32);
- dwords = (width * image->height) >> 5;
-
BEGIN_NVC0(chan, NvSub2D, 0x0814, 2);
if (info->fix.visual == FB_VISUAL_TRUECOLOR ||
info->fix.visual == FB_VISUAL_DIRECTCOLOR) {
OUT_RING (chan, 0);
OUT_RING (chan, image->dy);
+ dwords = ALIGN(image->width * image->height, 32) >> 5;
while (dwords) {
int push = dwords > 2047 ? 2047 : dwords;
nvkm-y += nvkm/engine/disp/sornv50.o
nvkm-y += nvkm/engine/disp/sorg94.o
nvkm-y += nvkm/engine/disp/sorgf119.o
+nvkm-y += nvkm/engine/disp/sorgm107.o
nvkm-y += nvkm/engine/disp/sorgm200.o
nvkm-y += nvkm/engine/disp/dport.o
mask |= 0x0001 << or;
mask |= 0x0100 << head;
+
list_for_each_entry(outp, &disp->base.outp, head) {
if ((outp->info.hasht & 0xff) == type &&
(outp->info.hashm & mask) == mask) {
if (!outp)
return NULL;
+ *conf = (ctrl & 0x00000f00) >> 8;
switch (outp->info.type) {
case DCB_OUTPUT_TMDS:
- *conf = (ctrl & 0x00000f00) >> 8;
if (*conf == 5)
*conf |= 0x0100;
break;
case DCB_OUTPUT_LVDS:
- *conf = disp->sor.lvdsconf;
- break;
- case DCB_OUTPUT_DP:
- *conf = (ctrl & 0x00000f00) >> 8;
+ *conf |= disp->sor.lvdsconf;
break;
- case DCB_OUTPUT_ANALOG:
default:
- *conf = 0x00ff;
break;
}
- data = nvbios_ocfg_match(bios, data, *conf, &ver, &hdr, &cnt, &len, &info2);
+ data = nvbios_ocfg_match(bios, data, *conf & 0xff, *conf >> 8,
+ &ver, &hdr, &cnt, &len, &info2);
if (data && id < 0xff) {
data = nvbios_oclk_match(bios, info2.clkcmp[id], pclk);
if (data) {
.outp.internal.crt = nv50_dac_output_new,
.outp.internal.tmds = nv50_sor_output_new,
.outp.internal.lvds = nv50_sor_output_new,
- .outp.internal.dp = gf119_sor_dp_new,
+ .outp.internal.dp = gm107_sor_dp_new,
.dac.nr = 3,
.dac.power = nv50_dac_power,
.dac.sense = nv50_dac_sense,
if (!outp)
return NULL;
+ *conf = (ctrl & 0x00000f00) >> 8;
if (outp->info.location == 0) {
switch (outp->info.type) {
case DCB_OUTPUT_TMDS:
- *conf = (ctrl & 0x00000f00) >> 8;
if (*conf == 5)
*conf |= 0x0100;
break;
case DCB_OUTPUT_LVDS:
- *conf = disp->sor.lvdsconf;
+ *conf |= disp->sor.lvdsconf;
break;
- case DCB_OUTPUT_DP:
- *conf = (ctrl & 0x00000f00) >> 8;
- break;
- case DCB_OUTPUT_ANALOG:
default:
- *conf = 0x00ff;
break;
}
} else {
pclk = pclk / 2;
}
- data = nvbios_ocfg_match(bios, data, *conf, &ver, &hdr, &cnt, &len, &info2);
+ data = nvbios_ocfg_match(bios, data, *conf & 0xff, *conf >> 8,
+ &ver, &hdr, &cnt, &len, &info2);
if (data && id < 0xff) {
data = nvbios_oclk_match(bios, info2.clkcmp[id], pclk);
if (data) {
int gf119_sor_dp_new(struct nvkm_disp *, int, struct dcb_output *,
struct nvkm_output **);
int gf119_sor_dp_lnk_ctl(struct nvkm_output_dp *, int, int, bool);
+int gf119_sor_dp_drv_ctl(struct nvkm_output_dp *, int, int, int, int);
-int gm200_sor_dp_new(struct nvkm_disp *, int, struct dcb_output *,
- struct nvkm_output **);
+int gm107_sor_dp_new(struct nvkm_disp *, int, struct dcb_output *,
+ struct nvkm_output **);
+int gm107_sor_dp_pattern(struct nvkm_output_dp *, int);
+
+int gm200_sor_dp_new(struct nvkm_disp *, int, struct dcb_output *,
+ struct nvkm_output **);
#endif
gf119_sor_dp_pattern(struct nvkm_output_dp *outp, int pattern)
{
struct nvkm_device *device = outp->base.disp->engine.subdev.device;
- const u32 loff = gf119_sor_loff(outp);
- nvkm_mask(device, 0x61c110 + loff, 0x0f0f0f0f, 0x01010101 * pattern);
+ nvkm_mask(device, 0x61c110, 0x0f0f0f0f, 0x01010101 * pattern);
return 0;
}
return 0;
}
-static int
+int
gf119_sor_dp_drv_ctl(struct nvkm_output_dp *outp,
int ln, int vs, int pe, int pc)
{
--- /dev/null
+/*
+ * Copyright 2016 Red Hat Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Ben Skeggs <bskeggs@redhat.com>
+ */
+#include "nv50.h"
+#include "outpdp.h"
+
+int
+gm107_sor_dp_pattern(struct nvkm_output_dp *outp, int pattern)
+{
+ struct nvkm_device *device = outp->base.disp->engine.subdev.device;
+ const u32 soff = outp->base.or * 0x800;
+ const u32 data = 0x01010101 * pattern;
+ if (outp->base.info.sorconf.link & 1)
+ nvkm_mask(device, 0x61c110 + soff, 0x0f0f0f0f, data);
+ else
+ nvkm_mask(device, 0x61c12c + soff, 0x0f0f0f0f, data);
+ return 0;
+}
+
+static const struct nvkm_output_dp_func
+gm107_sor_dp_func = {
+ .pattern = gm107_sor_dp_pattern,
+ .lnk_pwr = g94_sor_dp_lnk_pwr,
+ .lnk_ctl = gf119_sor_dp_lnk_ctl,
+ .drv_ctl = gf119_sor_dp_drv_ctl,
+};
+
+int
+gm107_sor_dp_new(struct nvkm_disp *disp, int index,
+ struct dcb_output *dcbE, struct nvkm_output **poutp)
+{
+ return nvkm_output_dp_new_(&gm107_sor_dp_func, disp, index, dcbE, poutp);
+}
return lane * 0x08;
}
-static int
-gm200_sor_dp_pattern(struct nvkm_output_dp *outp, int pattern)
-{
- struct nvkm_device *device = outp->base.disp->engine.subdev.device;
- const u32 soff = gm200_sor_soff(outp);
- const u32 data = 0x01010101 * pattern;
- if (outp->base.info.sorconf.link & 1)
- nvkm_mask(device, 0x61c110 + soff, 0x0f0f0f0f, data);
- else
- nvkm_mask(device, 0x61c12c + soff, 0x0f0f0f0f, data);
- return 0;
-}
-
static int
gm200_sor_dp_lnk_pwr(struct nvkm_output_dp *outp, int nr)
{
static const struct nvkm_output_dp_func
gm200_sor_dp_func = {
- .pattern = gm200_sor_dp_pattern,
+ .pattern = gm107_sor_dp_pattern,
.lnk_pwr = gm200_sor_dp_lnk_pwr,
.lnk_ctl = gf119_sor_dp_lnk_ctl,
.drv_ctl = gm200_sor_dp_drv_ctl,
}
static const struct nvkm_enum gf100_mp_warp_error[] = {
- { 0x00, "NO_ERROR" },
- { 0x01, "STACK_MISMATCH" },
+ { 0x01, "STACK_ERROR" },
+ { 0x02, "API_STACK_ERROR" },
+ { 0x03, "RET_EMPTY_STACK_ERROR" },
+ { 0x04, "PC_WRAP" },
{ 0x05, "MISALIGNED_PC" },
- { 0x08, "MISALIGNED_GPR" },
- { 0x09, "INVALID_OPCODE" },
- { 0x0d, "GPR_OUT_OF_BOUNDS" },
- { 0x0e, "MEM_OUT_OF_BOUNDS" },
- { 0x0f, "UNALIGNED_MEM_ACCESS" },
+ { 0x06, "PC_OVERFLOW" },
+ { 0x07, "MISALIGNED_IMMC_ADDR" },
+ { 0x08, "MISALIGNED_REG" },
+ { 0x09, "ILLEGAL_INSTR_ENCODING" },
+ { 0x0a, "ILLEGAL_SPH_INSTR_COMBO" },
+ { 0x0b, "ILLEGAL_INSTR_PARAM" },
+ { 0x0c, "INVALID_CONST_ADDR" },
+ { 0x0d, "OOR_REG" },
+ { 0x0e, "OOR_ADDR" },
+ { 0x0f, "MISALIGNED_ADDR" },
{ 0x10, "INVALID_ADDR_SPACE" },
- { 0x11, "INVALID_PARAM" },
+ { 0x11, "ILLEGAL_INSTR_PARAM2" },
+ { 0x12, "INVALID_CONST_ADDR_LDC" },
+ { 0x13, "GEOMETRY_SM_ERROR" },
+ { 0x14, "DIVERGENT" },
+ { 0x15, "WARP_EXIT" },
{}
};
static const struct nvkm_bitfield gf100_mp_global_error[] = {
+ { 0x00000001, "SM_TO_SM_FAULT" },
+ { 0x00000002, "L1_ERROR" },
{ 0x00000004, "MULTIPLE_WARP_ERRORS" },
- { 0x00000008, "OUT_OF_STACK_SPACE" },
+ { 0x00000008, "PHYSICAL_STACK_OVERFLOW" },
+ { 0x00000010, "BPT_INT" },
+ { 0x00000020, "BPT_PAUSE" },
+ { 0x00000040, "SINGLE_STEP_COMPLETE" },
+ { 0x20000000, "ECC_SEC_ERROR" },
+ { 0x40000000, "ECC_DED_ERROR" },
+ { 0x80000000, "TIMEOUT" },
{}
};
{
u16 data = nvbios_ocfg_entry(bios, outp, idx, ver, hdr, cnt, len);
if (data) {
- info->match = nvbios_rd16(bios, data + 0x00);
+ info->proto = nvbios_rd08(bios, data + 0x00);
+ info->flags = nvbios_rd16(bios, data + 0x01);
info->clkcmp[0] = nvbios_rd16(bios, data + 0x02);
info->clkcmp[1] = nvbios_rd16(bios, data + 0x04);
}
}
u16
-nvbios_ocfg_match(struct nvkm_bios *bios, u16 outp, u16 type,
+nvbios_ocfg_match(struct nvkm_bios *bios, u16 outp, u8 proto, u8 flags,
u8 *ver, u8 *hdr, u8 *cnt, u8 *len, struct nvbios_ocfg *info)
{
u16 data, idx = 0;
while ((data = nvbios_ocfg_parse(bios, outp, idx++, ver, hdr, cnt, len, info))) {
- if (info->match == type)
+ if ((info->proto == proto || info->proto == 0xff) &&
+ (info->flags == flags))
break;
}
return data;
}
static void
-gm107_ltc_lts_isr(struct nvkm_ltc *ltc, int c, int s)
+gm107_ltc_intr_lts(struct nvkm_ltc *ltc, int c, int s)
{
struct nvkm_subdev *subdev = <c->subdev;
struct nvkm_device *device = subdev->device;
- u32 base = 0x140000 + (c * 0x2000) + (s * 0x200);
+ u32 base = 0x140400 + (c * 0x2000) + (s * 0x200);
u32 stat = nvkm_rd32(device, base + 0x00c);
if (stat) {
while (mask) {
u32 s, c = __ffs(mask);
for (s = 0; s < ltc->lts_nr; s++)
- gm107_ltc_lts_isr(ltc, c, s);
+ gm107_ltc_intr_lts(ltc, c, s);
mask &= ~(1 << c);
}
}
gm200_ltc = {
.oneinit = gm200_ltc_oneinit,
.init = gm200_ltc_init,
- .intr = gm107_ltc_intr, /*XXX: not validated */
+ .intr = gm107_ltc_intr,
.cbc_clear = gm107_ltc_cbc_clear,
.cbc_wait = gm107_ltc_cbc_wait,
.zbc = 16,
tristate "OMAP DRM"
depends on DRM
depends on ARCH_OMAP2PLUS || ARCH_MULTIPLATFORM
+ select OMAP2_DSS
select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
select FB_SYS_FILLRECT
* the Free Software Foundation.
*/
+#include <linux/gpio/consumer.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
* the Free Software Foundation.
*/
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
* the Free Software Foundation.
*/
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
* the Free Software Foundation.
*/
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/backlight.h>
#include <linux/delay.h>
#include <linux/fb.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/spi/spi.h>
#include <linux/mutex.h>
#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/fb.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of_gpio.h>
#include <video/omapdss.h>
*/
#include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/sched.h>
#include <linux/backlight.h>
#include <linux/fb.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/delay.h>
#include <linux/spi/spi.h>
#include <linux/regulator/consumer.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/of_gpio.h>
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
struct regulator *vdds_dsi;
- int r;
if (dsi->vdds_dsi_reg != NULL)
return 0;
return PTR_ERR(vdds_dsi);
}
- if (regulator_can_change_voltage(vdds_dsi)) {
- r = regulator_set_voltage(vdds_dsi, 1800000, 1800000);
- if (r) {
- devm_regulator_put(vdds_dsi);
- DSSERR("can't set the DSI regulator voltage\n");
- return r;
- }
- }
-
dsi->vdds_dsi_reg = vdds_dsi;
return 0;
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/clk.h>
+#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/gfp.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/component.h>
+#include <linux/of.h>
#include <video/omapdss.h>
#include <sound/omap-hdmi-audio.h>
static int hdmi_init_regulator(void)
{
- int r;
struct regulator *reg;
if (hdmi.vdda_reg != NULL)
return PTR_ERR(reg);
}
- if (regulator_can_change_voltage(reg)) {
- r = regulator_set_voltage(reg, 1800000, 1800000);
- if (r) {
- devm_regulator_put(reg);
- DSSWARN("can't set the regulator voltage\n");
- return r;
- }
- }
-
hdmi.vdda_reg = reg;
return 0;
static void hdmi_core_powerdown_disable(struct hdmi_core_data *core)
{
DSSDBG("Enter hdmi_core_powerdown_disable\n");
- REG_FLD_MOD(core->base, HDMI_CORE_SYS_SYS_CTRL1, 0x0, 0, 0);
+ REG_FLD_MOD(core->base, HDMI_CORE_SYS_SYS_CTRL1, 0x1, 0, 0);
}
static void hdmi_core_swreset_release(struct hdmi_core_data *core)
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/component.h>
+#include <linux/of.h>
#include <video/omapdss.h>
#include <sound/omap-hdmi-audio.h>
static int hdmi_init_regulator(void)
{
- int r;
struct regulator *reg;
if (hdmi.vdda_reg != NULL)
return PTR_ERR(reg);
}
- if (regulator_can_change_voltage(reg)) {
- r = regulator_set_voltage(reg, 1800000, 1800000);
- if (r) {
- devm_regulator_put(reg);
- DSSWARN("can't set the regulator voltage\n");
- return r;
- }
- }
-
hdmi.vdda_reg = reg;
return 0;
{
void __iomem *base = core->base;
const unsigned long long iclk = 266000000; /* DSS L3 ICLK */
- const unsigned ss_scl_high = 4000; /* ns */
- const unsigned ss_scl_low = 4700; /* ns */
+ const unsigned ss_scl_high = 4600; /* ns */
+ const unsigned ss_scl_low = 5400; /* ns */
const unsigned fs_scl_high = 600; /* ns */
const unsigned fs_scl_low = 1300; /* ns */
const unsigned sda_hold = 1000; /* ns */
c = (ptr[1] >> 6) & 0x3;
m = (ptr[1] >> 4) & 0x3;
- r = (ptr[1] >> 0) & 0x3;
+ r = (ptr[1] >> 0) & 0xf;
itc = (ptr[2] >> 7) & 0x1;
ec = (ptr[2] >> 4) & 0x7;
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/seq_file.h>
#include <video/omapdss.h>
#include "dss.h"
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/seq_file.h>
#include <video/omapdss.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/platform_device.h>
+#include <linux/seq_file.h>
#include <video/omapdss.h>
#include "dss.h"
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/seq_file.h>
+
#include <drm/drm_crtc.h>
#include <drm/drm_fb_helper.h>
#include <linux/module.h>
#include <linux/platform_device.h> /* platform_device() */
#include <linux/sched.h>
+#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/vmalloc.h>
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/seq_file.h>
+
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/seq_file.h>
#include <linux/shmem_fs.h>
#include <linux/spinlock.h>
#include <linux/pfn_t.h>
mixer->status = STI_MIXER_DISABLING;
}
-static bool sti_crtc_mode_fixup(struct drm_crtc *crtc,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- /* accept the provided drm_display_mode, do not fix it up */
- drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V);
- return true;
-}
-
static int
sti_crtc_mode_set(struct drm_crtc *crtc, struct drm_display_mode *mode)
{
static const struct drm_crtc_helper_funcs sti_crtc_helper_funcs = {
.enable = sti_crtc_enable,
.disable = sti_crtc_disabling,
- .mode_fixup = sti_crtc_mode_fixup,
.mode_set = drm_helper_crtc_mode_set,
.mode_set_nofb = sti_crtc_mode_set_nofb,
.mode_set_base = drm_helper_crtc_mode_set_base,
WARN_ON_ONCE(dlist_next - dlist_start != vc4_state->mm.size);
- HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
- vc4_state->mm.start);
-
- if (debug_dump_regs) {
- DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc));
- vc4_hvs_dump_state(dev);
- }
-
if (crtc->state->event) {
unsigned long flags;
spin_lock_irqsave(&dev->event_lock, flags);
vc4_crtc->event = crtc->state->event;
- spin_unlock_irqrestore(&dev->event_lock, flags);
crtc->state->event = NULL;
+
+ HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+ vc4_state->mm.start);
+
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ } else {
+ HVS_WRITE(SCALER_DISPLISTX(vc4_crtc->channel),
+ vc4_state->mm.start);
+ }
+
+ if (debug_dump_regs) {
+ DRM_INFO("CRTC %d HVS after:\n", drm_crtc_index(crtc));
+ vc4_hvs_dump_state(dev);
}
}
{
struct drm_crtc *crtc = &vc4_crtc->base;
struct drm_device *dev = crtc->dev;
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(crtc->state);
+ u32 chan = vc4_crtc->channel;
unsigned long flags;
spin_lock_irqsave(&dev->event_lock, flags);
- if (vc4_crtc->event) {
+ if (vc4_crtc->event &&
+ (vc4_state->mm.start == HVS_READ(SCALER_DISPLACTX(chan)))) {
drm_crtc_send_vblank_event(crtc, vc4_crtc->event);
vc4_crtc->event = NULL;
+ drm_crtc_vblank_put(crtc);
}
spin_unlock_irqrestore(&dev->event_lock, flags);
}
spin_unlock_irqrestore(&dev->event_lock, flags);
}
+ drm_crtc_vblank_put(crtc);
drm_framebuffer_unreference(flip_state->fb);
kfree(flip_state);
return ret;
}
+ WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
/* Immediately update the plane's legacy fb pointer, so that later
* modeset prep sees the state that will be present when the semaphore
* is released.
};
static const struct drm_ioctl_desc vc4_drm_ioctls[] = {
- DRM_IOCTL_DEF_DRV(VC4_SUBMIT_CL, vc4_submit_cl_ioctl, 0),
- DRM_IOCTL_DEF_DRV(VC4_WAIT_SEQNO, vc4_wait_seqno_ioctl, 0),
- DRM_IOCTL_DEF_DRV(VC4_WAIT_BO, vc4_wait_bo_ioctl, 0),
- DRM_IOCTL_DEF_DRV(VC4_CREATE_BO, vc4_create_bo_ioctl, 0),
- DRM_IOCTL_DEF_DRV(VC4_MMAP_BO, vc4_mmap_bo_ioctl, 0),
- DRM_IOCTL_DEF_DRV(VC4_CREATE_SHADER_BO, vc4_create_shader_bo_ioctl, 0),
+ DRM_IOCTL_DEF_DRV(VC4_SUBMIT_CL, vc4_submit_cl_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(VC4_WAIT_SEQNO, vc4_wait_seqno_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(VC4_WAIT_BO, vc4_wait_bo_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(VC4_CREATE_BO, vc4_create_bo_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(VC4_MMAP_BO, vc4_mmap_bo_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(VC4_CREATE_SHADER_BO, vc4_create_shader_bo_ioctl, DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(VC4_GET_HANG_STATE, vc4_get_hang_state_ioctl,
DRM_ROOT_ONLY),
};
.enable_vblank = vc4_enable_vblank,
.disable_vblank = vc4_disable_vblank,
- .get_vblank_counter = drm_vblank_count,
+ .get_vblank_counter = drm_vblank_no_hw_counter,
#if defined(CONFIG_DEBUG_FS)
.debugfs_init = vc4_debugfs_init,
return -ENOMEM;
/* Make sure that any outstanding modesets have finished. */
- ret = down_interruptible(&vc4->async_modeset);
- if (ret) {
- kfree(c);
- return ret;
+ if (nonblock) {
+ ret = down_trylock(&vc4->async_modeset);
+ if (ret) {
+ kfree(c);
+ return -EBUSY;
+ }
+ } else {
+ ret = down_interruptible(&vc4->async_modeset);
+ if (ret) {
+ kfree(c);
+ return ret;
+ }
}
ret = drm_atomic_helper_prepare_planes(dev, state);
#define SCALER_DISPLACT0 0x00000030
#define SCALER_DISPLACT1 0x00000034
#define SCALER_DISPLACT2 0x00000038
+#define SCALER_DISPLACTX(x) (SCALER_DISPLACT0 + \
+ (x) * (SCALER_DISPLACT1 - \
+ SCALER_DISPLACT0))
+
#define SCALER_DISPCTRL0 0x00000040
# define SCALER_DISPCTRLX_ENABLE BIT(31)
# define SCALER_DISPCTRLX_RESET BIT(30)
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/frame.h>
#include <asm/hypervisor.h>
#include "drmP.h"
#include "vmwgfx_msg.h"
return -EINVAL;
}
-
+STACK_FRAME_NON_STANDARD(vmw_send_msg);
/**
return 0;
}
+STACK_FRAME_NON_STANDARD(vmw_recv_msg);
/**
*/
static int read_registers(struct fam15h_power_data *data)
{
- int this_cpu, ret, cpu;
int core, this_core;
cpumask_var_t mask;
+ int ret, cpu;
ret = zalloc_cpumask_var(&mask, GFP_KERNEL);
if (!ret)
memset(data->cu_on, 0, sizeof(int) * MAX_CUS);
get_online_cpus();
- this_cpu = smp_processor_id();
/*
* Choose the first online core of each compute unit, and then
cpumask_set_cpu(cpumask_any(topology_sibling_cpumask(cpu)), mask);
}
- if (cpumask_test_cpu(this_cpu, mask))
- do_read_registers_on_cu(data);
+ on_each_cpu_mask(mask, do_read_registers_on_cu, data, true);
- smp_call_function_many(mask, do_read_registers_on_cu, data, true);
put_online_cpus();
-
free_cpumask_var(mask);
return 0;
int kind;
u32 flags;
- int update_interval; /* in milliseconds */
+ unsigned int update_interval; /* in milliseconds */
u8 config_orig; /* Original configuration register value */
u8 convrate_orig; /* Original conversion rate register value */
struct platform_device *mux_pdev;
#endif
struct platform_device *tco_pdev;
+
+ /*
+ * If set to true the host controller registers are reserved for
+ * ACPI AML use. Protected by acpi_lock.
+ */
+ bool acpi_reserved;
+ struct mutex acpi_lock;
};
#define FEATURE_SMBUS_PEC (1 << 0)
int ret = 0, xact = 0;
struct i801_priv *priv = i2c_get_adapdata(adap);
+ mutex_lock(&priv->acpi_lock);
+ if (priv->acpi_reserved) {
+ mutex_unlock(&priv->acpi_lock);
+ return -EBUSY;
+ }
+
pm_runtime_get_sync(&priv->pci_dev->dev);
hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC)
out:
pm_runtime_mark_last_busy(&priv->pci_dev->dev);
pm_runtime_put_autosuspend(&priv->pci_dev->dev);
+ mutex_unlock(&priv->acpi_lock);
return ret;
}
priv->tco_pdev = pdev;
}
+#ifdef CONFIG_ACPI
+static acpi_status
+i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits,
+ u64 *value, void *handler_context, void *region_context)
+{
+ struct i801_priv *priv = handler_context;
+ struct pci_dev *pdev = priv->pci_dev;
+ acpi_status status;
+
+ /*
+ * Once BIOS AML code touches the OpRegion we warn and inhibit any
+ * further access from the driver itself. This device is now owned
+ * by the system firmware.
+ */
+ mutex_lock(&priv->acpi_lock);
+
+ if (!priv->acpi_reserved) {
+ priv->acpi_reserved = true;
+
+ dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n");
+ dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n");
+
+ /*
+ * BIOS is accessing the host controller so prevent it from
+ * suspending automatically from now on.
+ */
+ pm_runtime_get_sync(&pdev->dev);
+ }
+
+ if ((function & ACPI_IO_MASK) == ACPI_READ)
+ status = acpi_os_read_port(address, (u32 *)value, bits);
+ else
+ status = acpi_os_write_port(address, (u32)*value, bits);
+
+ mutex_unlock(&priv->acpi_lock);
+
+ return status;
+}
+
+static int i801_acpi_probe(struct i801_priv *priv)
+{
+ struct acpi_device *adev;
+ acpi_status status;
+
+ adev = ACPI_COMPANION(&priv->pci_dev->dev);
+ if (adev) {
+ status = acpi_install_address_space_handler(adev->handle,
+ ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler,
+ NULL, priv);
+ if (ACPI_SUCCESS(status))
+ return 0;
+ }
+
+ return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]);
+}
+
+static void i801_acpi_remove(struct i801_priv *priv)
+{
+ struct acpi_device *adev;
+
+ adev = ACPI_COMPANION(&priv->pci_dev->dev);
+ if (!adev)
+ return;
+
+ acpi_remove_address_space_handler(adev->handle,
+ ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler);
+
+ mutex_lock(&priv->acpi_lock);
+ if (priv->acpi_reserved)
+ pm_runtime_put(&priv->pci_dev->dev);
+ mutex_unlock(&priv->acpi_lock);
+}
+#else
+static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; }
+static inline void i801_acpi_remove(struct i801_priv *priv) { }
+#endif
+
static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned char temp;
priv->adapter.dev.parent = &dev->dev;
ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev));
priv->adapter.retries = 3;
+ mutex_init(&priv->acpi_lock);
priv->pci_dev = dev;
switch (dev->device) {
return -ENODEV;
}
- err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
- if (err) {
+ if (i801_acpi_probe(priv))
return -ENODEV;
- }
err = pcim_iomap_regions(dev, 1 << SMBBAR,
dev_driver_string(&dev->dev));
"Failed to request SMBus region 0x%lx-0x%Lx\n",
priv->smba,
(unsigned long long)pci_resource_end(dev, SMBBAR));
+ i801_acpi_remove(priv);
return err;
}
err = i2c_add_adapter(&priv->adapter);
if (err) {
dev_err(&dev->dev, "Failed to add SMBus adapter\n");
+ i801_acpi_remove(priv);
return err;
}
i801_del_mux(priv);
i2c_del_adapter(&priv->adapter);
+ i801_acpi_remove(priv);
pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
platform_device_unregister(priv->tco_pdev);
return result;
for (i = 0; i < length; i++) {
- /* for the last byte TWSI_CTL_AAK must not be set */
- if (i + 1 == length)
+ /*
+ * For the last byte to receive TWSI_CTL_AAK must not be set.
+ *
+ * A special case is I2C_M_RECV_LEN where we don't know the
+ * additional length yet. If recv_len is set we assume we're
+ * not reading the final byte and therefore need to set
+ * TWSI_CTL_AAK.
+ */
+ if ((i + 1 == length) && !(recv_len && i == 0))
final_read = true;
/* clear iflg to allow next event */
data[i] = octeon_i2c_data_read(i2c);
if (recv_len && i == 0) {
- if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) {
- dev_err(i2c->dev,
- "%s: read len > I2C_SMBUS_BLOCK_MAX %d\n",
- __func__, data[i]);
+ if (data[i] > I2C_SMBUS_BLOCK_MAX + 1)
return -EPROTO;
- }
length += data[i];
}
.remove = i2c_mux_reg_remove,
.driver = {
.name = "i2c-mux-reg",
+ .of_match_table = of_match_ptr(i2c_mux_reg_of_match),
},
};
{
int ret = 0;
struct net_device *old_net_dev;
+ enum ib_gid_type old_gid_type;
/* in rdma_cap_roce_gid_table, this funciton should be protected by a
* sleep-able lock.
}
old_net_dev = table->data_vec[ix].attr.ndev;
+ old_gid_type = table->data_vec[ix].attr.gid_type;
if (old_net_dev && old_net_dev != attr->ndev)
dev_put(old_net_dev);
/* if modify_gid failed, just delete the old gid */
attr = &zattr;
table->data_vec[ix].context = NULL;
}
- if (default_gid)
- table->data_vec[ix].props |= GID_TABLE_ENTRY_DEFAULT;
+
memcpy(&table->data_vec[ix].gid, gid, sizeof(*gid));
memcpy(&table->data_vec[ix].attr, attr, sizeof(*attr));
+ if (default_gid) {
+ table->data_vec[ix].props |= GID_TABLE_ENTRY_DEFAULT;
+ if (action == GID_TABLE_WRITE_ACTION_DEL)
+ table->data_vec[ix].attr.gid_type = old_gid_type;
+ }
if (table->data_vec[ix].attr.ndev &&
table->data_vec[ix].attr.ndev != old_net_dev)
dev_hold(table->data_vec[ix].attr.ndev);
work->cm_event.event = IB_CM_USER_ESTABLISHED;
/* Check if the device started its remove_one */
- spin_lock_irq(&cm.lock);
+ spin_lock_irqsave(&cm.lock, flags);
if (!cm_dev->going_down) {
queue_delayed_work(cm.wq, &work->work, 0);
} else {
kfree(work);
ret = -ENODEV;
}
- spin_unlock_irq(&cm.lock);
+ spin_unlock_irqrestore(&cm.lock, flags);
out:
return ret;
if (err || port_attr->subnet_prefix)
return err;
+ if (rdma_port_get_link_layer(device, port_num) != IB_LINK_LAYER_INFINIBAND)
+ return 0;
+
err = ib_query_gid(device, port_num, 0, &gid, NULL);
if (err)
return err;
goto err_mad;
}
- if (ib_add_ibnl_clients()) {
+ ret = ib_add_ibnl_clients();
+ if (ret) {
pr_warn("Couldn't register ibnl clients\n");
goto err_sa;
}
if (!nlmsg_request) {
pr_info("%s: Could not find a matching request (seq = %u)\n",
__func__, msg_seq);
- return -EINVAL;
+ return -EINVAL;
}
pm_msg = nlmsg_request->req_buffer;
local_sockaddr = (struct sockaddr_storage *)
/* Now, check to see if there are any methods still in use */
if (!check_method_table(method)) {
/* If not, release management method table */
- kfree(method);
- class->method_table[mgmt_class] = NULL;
- /* Any management classes left ? */
+ kfree(method);
+ class->method_table[mgmt_class] = NULL;
+ /* Any management classes left ? */
if (!check_class_table(class)) {
/* If not, release management class table */
kfree(class);
static void setup_hw_stats(struct ib_device *device, struct ib_port *port,
u8 port_num)
{
- struct attribute_group *hsag = NULL;
+ struct attribute_group *hsag;
struct rdma_hw_stats *stats;
- int i = 0, ret;
+ int i, ret;
stats = device->alloc_hw_stats(device, port_num);
return;
if (!stats->names || stats->num_counters <= 0)
- goto err;
+ goto err_free_stats;
+ /*
+ * Two extra attribue elements here, one for the lifespan entry and
+ * one to NULL terminate the list for the sysfs core code
+ */
hsag = kzalloc(sizeof(*hsag) +
- // 1 extra for the lifespan config entry
- sizeof(void *) * (stats->num_counters + 1),
+ sizeof(void *) * (stats->num_counters + 2),
GFP_KERNEL);
if (!hsag)
- return;
+ goto err_free_stats;
ret = device->get_hw_stats(device, stats, port_num,
stats->num_counters);
if (ret != stats->num_counters)
- goto err;
+ goto err_free_hsag;
stats->timestamp = jiffies;
hsag->attrs[i] = alloc_hsa(i, port_num, stats->names[i]);
if (!hsag->attrs[i])
goto err;
+ sysfs_attr_init(hsag->attrs[i]);
}
/* treat an error here as non-fatal */
hsag->attrs[i] = alloc_hsa_lifespan("lifespan", port_num);
+ if (hsag->attrs[i])
+ sysfs_attr_init(hsag->attrs[i]);
if (port) {
struct kobject *kobj = &port->kobj;
return;
err:
- kfree(stats);
for (; i >= 0; i--)
kfree(hsag->attrs[i]);
+err_free_hsag:
kfree(hsag);
+err_free_stats:
+ kfree(stats);
return;
}
const struct cpumask *node_mask,
*proc_mask = tsk_cpus_allowed(current);
struct cpu_mask_set *set = &dd->affinity->proc;
- char buf[1024];
/*
* check whether process/context affinity has already
* been set
*/
if (cpumask_weight(proc_mask) == 1) {
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(proc_mask));
- hfi1_cdbg(PROC, "PID %u %s affinity set to CPU %s",
- current->pid, current->comm, buf);
+ hfi1_cdbg(PROC, "PID %u %s affinity set to CPU %*pbl",
+ current->pid, current->comm,
+ cpumask_pr_args(proc_mask));
/*
* Mark the pre-set CPU as used. This is atomic so we don't
* need the lock
cpumask_set_cpu(cpu, &set->used);
goto done;
} else if (cpumask_weight(proc_mask) < cpumask_weight(&set->mask)) {
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(proc_mask));
- hfi1_cdbg(PROC, "PID %u %s affinity set to CPU set(s) %s",
- current->pid, current->comm, buf);
+ hfi1_cdbg(PROC, "PID %u %s affinity set to CPU set(s) %*pbl",
+ current->pid, current->comm,
+ cpumask_pr_args(proc_mask));
goto done;
}
cpumask_or(intrs, intrs, (dd->affinity->rcv_intr.gen ?
&dd->affinity->rcv_intr.mask :
&dd->affinity->rcv_intr.used));
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(intrs));
- hfi1_cdbg(PROC, "CPUs used by interrupts: %s", buf);
+ hfi1_cdbg(PROC, "CPUs used by interrupts: %*pbl",
+ cpumask_pr_args(intrs));
/*
* If we don't have a NUMA node requested, preference is towards
if (node == -1)
node = dd->node;
node_mask = cpumask_of_node(node);
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(node_mask));
- hfi1_cdbg(PROC, "device on NUMA %u, CPUs %s", node, buf);
+ hfi1_cdbg(PROC, "device on NUMA %u, CPUs %*pbl", node,
+ cpumask_pr_args(node_mask));
/* diff will hold all unused cpus */
cpumask_andnot(diff, &set->mask, &set->used);
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(diff));
- hfi1_cdbg(PROC, "unused CPUs (all) %s", buf);
+ hfi1_cdbg(PROC, "unused CPUs (all) %*pbl", cpumask_pr_args(diff));
/* get cpumask of available CPUs on preferred NUMA */
cpumask_and(mask, diff, node_mask);
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(mask));
- hfi1_cdbg(PROC, "available cpus on NUMA %s", buf);
+ hfi1_cdbg(PROC, "available cpus on NUMA %*pbl", cpumask_pr_args(mask));
/*
* At first, we don't want to place processes on the same
cpumask_andnot(diff, &set->mask, &set->used);
cpumask_andnot(mask, diff, node_mask);
}
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(mask));
- hfi1_cdbg(PROC, "possible CPUs for process %s", buf);
+ hfi1_cdbg(PROC, "possible CPUs for process %*pbl",
+ cpumask_pr_args(mask));
cpu = cpumask_first(mask);
if (cpu >= nr_cpu_ids) /* empty */
* save first 2 flits in the packet that caused
* the error
*/
- dd->err_info_rcvport.packet_flit1 = hdr0;
- dd->err_info_rcvport.packet_flit2 = hdr1;
+ dd->err_info_rcvport.packet_flit1 = hdr0;
+ dd->err_info_rcvport.packet_flit2 = hdr1;
}
switch (info) {
case 1:
hfi1_cdbg(CNTR, "[%d] No update necessary", dd->unit);
}
-mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME);
+ mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME);
}
#define C_MAX_NAME 13 /* 12 chars + one for /0 */
dma_free_coherent(&dd->pcidev->dev, sizeof(u64),
(void *)dd->rcvhdrtail_dummy_kvaddr,
dd->rcvhdrtail_dummy_physaddr);
- dd->rcvhdrtail_dummy_kvaddr = NULL;
+ dd->rcvhdrtail_dummy_kvaddr = NULL;
}
for (ctxt = 0; tmp && ctxt < dd->num_rcv_contexts; ctxt++) {
return ret;
}
-const char *print_u64_array(
- struct trace_seq *p,
- u64 *arr, int len)
-{
- int i;
- const char *ret = trace_seq_buffer_ptr(p);
-
- for (i = 0; i < len; i++)
- trace_seq_printf(p, "%s0x%016llx", i == 0 ? "" : " ", arr[i]);
- trace_seq_putc(p, 0);
- return ret;
-}
-
__hfi1_trace_fn(PKT);
__hfi1_trace_fn(PROC);
__hfi1_trace_fn(SDMA);
struct sdma_mmu_node *node;
};
-#define SDMA_CACHE_NODE_EVICT BIT(0)
+#define SDMA_CACHE_NODE_EVICT 0
struct sdma_mmu_node {
struct mmu_rb_node rb;
*/
SDMA_DBG(req, "TID offset %ubytes %uunits om%u",
req->tidoffset, req->tidoffset / req->omfactor,
- !!(req->omfactor - KDETH_OM_SMALL));
+ req->omfactor != KDETH_OM_SMALL);
KDETH_SET(hdr->kdeth.ver_tid_offset, OFFSET,
req->tidoffset / req->omfactor);
KDETH_SET(hdr->kdeth.ver_tid_offset, OM,
- !!(req->omfactor - KDETH_OM_SMALL));
+ req->omfactor != KDETH_OM_SMALL);
}
done:
trace_hfi1_sdma_user_header(pq->dd, pq->ctxt, pq->subctxt,
props->device_cap_flags |= IB_DEVICE_MEM_WINDOW_TYPE_2B;
else
props->device_cap_flags |= IB_DEVICE_MEM_WINDOW_TYPE_2A;
- if (dev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED)
- props->device_cap_flags |= IB_DEVICE_MANAGED_FLOW_STEERING;
}
+ if (dev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED)
+ props->device_cap_flags |= IB_DEVICE_MANAGED_FLOW_STEERING;
props->device_cap_flags |= IB_DEVICE_RAW_IP_CSUM;
int eqn;
int err;
- if (entries < 0)
+ if (entries < 0 ||
+ (entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz))))
return ERR_PTR(-EINVAL);
if (check_cq_create_flags(attr->flags))
return -ENOSYS;
}
- if (entries < 1)
+ if (entries < 1 ||
+ entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz))) {
+ mlx5_ib_warn(dev, "wrong entries number %d, max %d\n",
+ entries,
+ 1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz));
return -EINVAL;
+ }
entries = roundup_pow_of_two(entries + 1);
- if (entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz)) + 1)
+ if (entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz)) + 1)
return -EINVAL;
if (entries == ibcq->cqe + 1)
MLX5_CAP_ETH(dev->mdev, scatter_fcs))
props->device_cap_flags |= IB_DEVICE_RAW_SCATTER_FCS;
+ if (mlx5_get_flow_namespace(dev->mdev, MLX5_FLOW_NAMESPACE_BYPASS))
+ props->device_cap_flags |= IB_DEVICE_MANAGED_FLOW_STEERING;
+
props->vendor_part_id = mdev->pdev->device;
props->hw_ver = mdev->pdev->revision;
num_uars = req.total_num_uuars / MLX5_NON_FP_BF_REGS_PER_PAGE;
gross_uuars = num_uars * MLX5_BF_REGS_PER_PAGE;
resp.qp_tab_size = 1 << MLX5_CAP_GEN(dev->mdev, log_max_qp);
- resp.bf_reg_size = 1 << MLX5_CAP_GEN(dev->mdev, log_bf_reg_size);
+ if (mlx5_core_is_pf(dev->mdev) && MLX5_CAP_GEN(dev->mdev, bf))
+ resp.bf_reg_size = 1 << MLX5_CAP_GEN(dev->mdev, log_bf_reg_size);
resp.cache_line_size = L1_CACHE_BYTES;
resp.max_sq_desc_sz = MLX5_CAP_GEN(dev->mdev, max_wqe_sz_sq);
resp.max_rq_desc_sz = MLX5_CAP_GEN(dev->mdev, max_wqe_sz_rq);
if (field_avail(typeof(resp), cqe_version, udata->outlen))
resp.response_length += sizeof(resp.cqe_version);
- if (field_avail(typeof(resp), hca_core_clock_offset, udata->outlen)) {
+ /*
+ * We don't want to expose information from the PCI bar that is located
+ * after 4096 bytes, so if the arch only supports larger pages, let's
+ * pretend we don't support reading the HCA's core clock. This is also
+ * forced by mmap function.
+ */
+ if (PAGE_SIZE <= 4096 &&
+ field_avail(typeof(resp), hca_core_clock_offset, udata->outlen)) {
resp.comp_mask |=
MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_CORE_CLOCK_OFFSET;
resp.hca_core_clock_offset =
{
struct mlx5_ib_dev *dev =
container_of(device, struct mlx5_ib_dev, ib_dev.dev);
- return sprintf(buf, "%d.%d.%d\n", fw_rev_maj(dev->mdev),
+ return sprintf(buf, "%d.%d.%04d\n", fw_rev_maj(dev->mdev),
fw_rev_min(dev->mdev), fw_rev_sub(dev->mdev));
}
break;
case MLX5_DEV_EVENT_PORT_DOWN:
+ case MLX5_DEV_EVENT_PORT_INITIALIZED:
ibev.event = IB_EVENT_PORT_ERR;
port = (u8)param;
break;
- case MLX5_DEV_EVENT_PORT_INITIALIZED:
- /* not used by ULPs */
- return;
-
case MLX5_DEV_EVENT_LID_CHANGE:
ibev.event = IB_EVENT_LID_CHANGE;
port = (u8)param;
qp->rq.max_gs = 0;
qp->rq.wqe_cnt = 0;
qp->rq.wqe_shift = 0;
+ cap->max_recv_wr = 0;
+ cap->max_recv_sge = 0;
} else {
if (ucmd) {
qp->rq.wqe_cnt = ucmd->rq_wqe_count;
static int mlx5_set_path(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
const struct ib_ah_attr *ah,
struct mlx5_qp_path *path, u8 port, int attr_mask,
- u32 path_flags, const struct ib_qp_attr *attr)
+ u32 path_flags, const struct ib_qp_attr *attr,
+ bool alt)
{
enum rdma_link_layer ll = rdma_port_get_link_layer(&dev->ib_dev, port);
int err;
if (attr_mask & IB_QP_PKEY_INDEX)
- path->pkey_index = attr->pkey_index;
+ path->pkey_index = cpu_to_be16(alt ? attr->alt_pkey_index :
+ attr->pkey_index);
if (ah->ah_flags & IB_AH_GRH) {
if (ah->grh.sgid_index >=
ah->grh.sgid_index);
path->dci_cfi_prio_sl = (ah->sl & 0x7) << 4;
} else {
- path->fl = (path_flags & MLX5_PATH_FLAG_FL) ? 0x80 : 0;
- path->free_ar = (path_flags & MLX5_PATH_FLAG_FREE_AR) ? 0x80 :
- 0;
+ path->fl_free_ar = (path_flags & MLX5_PATH_FLAG_FL) ? 0x80 : 0;
+ path->fl_free_ar |=
+ (path_flags & MLX5_PATH_FLAG_FREE_AR) ? 0x40 : 0;
path->rlid = cpu_to_be16(ah->dlid);
path->grh_mlid = ah->src_path_bits & 0x7f;
if (ah->ah_flags & IB_AH_GRH)
path->port = port;
if (attr_mask & IB_QP_TIMEOUT)
- path->ackto_lt = attr->timeout << 3;
+ path->ackto_lt = (alt ? attr->alt_timeout : attr->timeout) << 3;
if ((qp->ibqp.qp_type == IB_QPT_RAW_PACKET) && qp->sq.wqe_cnt)
return modify_raw_packet_eth_prio(dev->mdev,
context->log_pg_sz_remote_qpn = cpu_to_be32(attr->dest_qp_num);
if (attr_mask & IB_QP_PKEY_INDEX)
- context->pri_path.pkey_index = attr->pkey_index;
+ context->pri_path.pkey_index = cpu_to_be16(attr->pkey_index);
/* todo implement counter_index functionality */
if (attr_mask & IB_QP_AV) {
err = mlx5_set_path(dev, qp, &attr->ah_attr, &context->pri_path,
attr_mask & IB_QP_PORT ? attr->port_num : qp->port,
- attr_mask, 0, attr);
+ attr_mask, 0, attr, false);
if (err)
goto out;
}
if (attr_mask & IB_QP_ALT_PATH) {
err = mlx5_set_path(dev, qp, &attr->alt_ah_attr,
&context->alt_path,
- attr->alt_port_num, attr_mask, 0, attr);
+ attr->alt_port_num,
+ attr_mask | IB_QP_PKEY_INDEX | IB_QP_TIMEOUT,
+ 0, attr, true);
if (err)
goto out;
}
if (qp->ibqp.qp_type == IB_QPT_RC || qp->ibqp.qp_type == IB_QPT_UC) {
to_ib_ah_attr(dev, &qp_attr->ah_attr, &context->pri_path);
to_ib_ah_attr(dev, &qp_attr->alt_ah_attr, &context->alt_path);
- qp_attr->alt_pkey_index = context->alt_path.pkey_index & 0x7f;
+ qp_attr->alt_pkey_index =
+ be16_to_cpu(context->alt_path.pkey_index);
qp_attr->alt_port_num = qp_attr->alt_ah_attr.port_num;
}
- qp_attr->pkey_index = context->pri_path.pkey_index & 0x7f;
+ qp_attr->pkey_index = be16_to_cpu(context->pri_path.pkey_index);
qp_attr->port_num = context->pri_path.port;
/* qp_attr->en_sqd_async_notify is only applicable in modify qp */
qp_attr->cap.max_recv_sge = qp->rq.max_gs;
if (!ibqp->uobject) {
- qp_attr->cap.max_send_wr = qp->sq.wqe_cnt;
+ qp_attr->cap.max_send_wr = qp->sq.max_post;
qp_attr->cap.max_send_sge = qp->sq.max_gs;
+ qp_init_attr->qp_context = ibqp->qp_context;
} else {
qp_attr->cap.max_send_wr = 0;
qp_attr->cap.max_send_sge = 0;
}
- /* We don't support inline sends for kernel QPs (yet), and we
- * don't know what userspace's value should be.
- */
- qp_attr->cap.max_inline_data = 0;
+ qp_init_attr->qp_type = ibqp->qp_type;
+ qp_init_attr->recv_cq = ibqp->recv_cq;
+ qp_init_attr->send_cq = ibqp->send_cq;
+ qp_init_attr->srq = ibqp->srq;
+ qp_attr->cap.max_inline_data = qp->max_inline_data;
qp_init_attr->cap = qp_attr->cap;
#include <linux/dma-mapping.h>
#include <linux/sched.h>
#include <linux/hugetlb.h>
-#include <linux/dma-attrs.h>
#include <linux/iommu.h>
#include <linux/workqueue.h>
#include <linux/list.h>
int i;
int flags;
dma_addr_t pa;
- DEFINE_DMA_ATTRS(attrs);
-
- if (dmasync)
- dma_set_attr(DMA_ATTR_WRITE_BARRIER, &attrs);
if (!can_do_mlock())
return -EPERM;
*/
static void rvt_reset_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp,
enum ib_qp_type type)
+ __releases(&qp->s_lock)
+ __releases(&qp->s_hlock)
+ __releases(&qp->r_lock)
+ __acquires(&qp->r_lock)
+ __acquires(&qp->s_hlock)
+ __acquires(&qp->s_lock)
{
if (qp->state != IB_QPS_RESET) {
qp->state = IB_QPS_RESET;
IPOIB_NEIGH_TBL_FLUSH = 12,
IPOIB_FLAG_DEV_ADDR_SET = 13,
IPOIB_FLAG_DEV_ADDR_CTRL = 14,
+ IPOIB_FLAG_GOING_DOWN = 15,
IPOIB_MAX_BACKOFF_SECONDS = 16,
{
struct net_device *dev = to_net_dev(d);
int ret;
+ struct ipoib_dev_priv *priv = netdev_priv(dev);
+
+ if (test_bit(IPOIB_FLAG_GOING_DOWN, &priv->flags))
+ return -EPERM;
if (!rtnl_trylock())
return restart_syscall();
if (ib_query_gid(priv->ca, priv->port, 0, &gid0, NULL))
return false;
- netif_addr_lock(priv->dev);
+ netif_addr_lock_bh(priv->dev);
/* The subnet prefix may have changed, update it now so we won't have
* to do it later
search_gid.global.interface_id = priv->local_gid.global.interface_id;
- netif_addr_unlock(priv->dev);
+ netif_addr_unlock_bh(priv->dev);
err = ib_find_gid(priv->ca, &search_gid, IB_GID_TYPE_IB,
priv->dev, &port, &index);
- netif_addr_lock(priv->dev);
+ netif_addr_lock_bh(priv->dev);
if (search_gid.global.interface_id !=
priv->local_gid.global.interface_id)
}
out:
- netif_addr_unlock(priv->dev);
+ netif_addr_unlock_bh(priv->dev);
return ret;
}
neigh = NULL;
goto out_unlock;
}
- neigh->alive = jiffies;
+
+ if (likely(skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE))
+ neigh->alive = jiffies;
goto out_unlock;
}
}
struct ipoib_dev_priv *child_priv;
struct net_device *netdev = priv->dev;
- netif_addr_lock(netdev);
+ netif_addr_lock_bh(netdev);
memcpy(&priv->local_gid.global.interface_id,
&gid->global.interface_id,
memcpy(netdev->dev_addr + 4, &priv->local_gid, sizeof(priv->local_gid));
clear_bit(IPOIB_FLAG_DEV_ADDR_SET, &priv->flags);
- netif_addr_unlock(netdev);
+ netif_addr_unlock_bh(netdev);
if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
down_read(&priv->vlan_rwsem);
union ib_gid *gid = (union ib_gid *)(ss->__data + 4);
int ret = 0;
- netif_addr_lock(dev);
+ netif_addr_lock_bh(dev);
/* Make sure the QPN, reserved and subnet prefix match the current
* lladdr, it also makes sure the lladdr is unicast.
gid->global.interface_id == 0)
ret = -EINVAL;
- netif_addr_unlock(dev);
+ netif_addr_unlock_bh(dev);
return ret;
}
ib_unregister_event_handler(&priv->event_handler);
flush_workqueue(ipoib_workqueue);
+ /* mark interface in the middle of destruction */
+ set_bit(IPOIB_FLAG_GOING_DOWN, &priv->flags);
+
rtnl_lock();
dev_change_flags(priv->dev, priv->dev->flags & ~IFF_UP);
rtnl_unlock();
return;
}
priv->local_lid = port_attr.lid;
- netif_addr_lock(dev);
+ netif_addr_lock_bh(dev);
if (!test_bit(IPOIB_FLAG_DEV_ADDR_SET, &priv->flags)) {
- netif_addr_unlock(dev);
+ netif_addr_unlock_bh(dev);
return;
}
- netif_addr_unlock(dev);
+ netif_addr_unlock_bh(dev);
spin_lock_irq(&priv->lock);
if (!test_bit(IPOIB_FLAG_OPER_UP, &priv->flags))
ppriv = netdev_priv(pdev);
+ if (test_bit(IPOIB_FLAG_GOING_DOWN, &ppriv->flags))
+ return -EPERM;
+
snprintf(intf_name, sizeof intf_name, "%s.%04x",
ppriv->dev->name, pkey);
priv = ipoib_intf_alloc(intf_name);
ppriv = netdev_priv(pdev);
+ if (test_bit(IPOIB_FLAG_GOING_DOWN, &ppriv->flags))
+ return -EPERM;
+
if (!rtnl_trylock())
return restart_syscall();
{
unsigned int sg_offset = 0;
- state->desc = req->indirect_desc;
state->fr.next = req->fr_list;
state->fr.end = req->fr_list + ch->target->mr_per_cmd;
state->sg = scat;
struct scatterlist *sg;
int i;
- state->desc = req->indirect_desc;
for_each_sg(scat, sg, count, i) {
srp_map_desc(state, ib_sg_dma_address(dev->dev, sg),
ib_sg_dma_len(dev->dev, sg),
target->indirect_size, DMA_TO_DEVICE);
memset(&state, 0, sizeof(state));
+ state.desc = req->indirect_desc;
if (dev->use_fast_reg)
ret = srp_map_sg_fr(&state, ch, req, scat, count);
else if (dev->use_fmr)
int mr_page_shift, p;
u64 max_pages_per_mr;
- srp_dev = kmalloc(sizeof *srp_dev, GFP_KERNEL);
+ srp_dev = kzalloc(sizeof(*srp_dev), GFP_KERNEL);
if (!srp_dev)
return;
IB_ACCESS_REMOTE_WRITE);
if (IS_ERR(srp_dev->global_mr))
goto err_pd;
- } else {
- srp_dev->global_mr = NULL;
}
for (p = rdma_start_port(device); p <= rdma_end_port(device); ++p) {
#define ITS_FLAGS_CMDQ_NEEDS_FLUSHING (1ULL << 0)
#define ITS_FLAGS_WORKAROUND_CAVIUM_22375 (1ULL << 1)
+#define ITS_FLAGS_WORKAROUND_CAVIUM_23144 (1ULL << 2)
#define RDIST_FLAGS_PROPBASE_NEEDS_FLUSHING (1 << 0)
u64 flags;
u32 ite_size;
u32 device_ids;
+ int numa_node;
};
#define ITS_ITT_ALIGN SZ_256
static int its_set_affinity(struct irq_data *d, const struct cpumask *mask_val,
bool force)
{
- unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
+ unsigned int cpu;
+ const struct cpumask *cpu_mask = cpu_online_mask;
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
struct its_collection *target_col;
u32 id = its_get_event_id(d);
+ /* lpi cannot be routed to a redistributor that is on a foreign node */
+ if (its_dev->its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
+ if (its_dev->its->numa_node >= 0) {
+ cpu_mask = cpumask_of_node(its_dev->its->numa_node);
+ if (!cpumask_intersects(mask_val, cpu_mask))
+ return -EINVAL;
+ }
+ }
+
+ cpu = cpumask_any_and(mask_val, cpu_mask);
+
if (cpu >= nr_cpu_ids)
return -EINVAL;
list_for_each_entry(its, &its_nodes, entry) {
u64 target;
+ /* avoid cross node collections and its mapping */
+ if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_23144) {
+ struct device_node *cpu_node;
+
+ cpu_node = of_get_cpu_node(cpu, NULL);
+ if (its->numa_node != NUMA_NO_NODE &&
+ its->numa_node != of_node_to_nid(cpu_node))
+ continue;
+ }
+
/*
* We now have to bind each collection to its target
* redistributor.
{
struct its_device *its_dev = irq_data_get_irq_chip_data(d);
u32 event = its_get_event_id(d);
+ const struct cpumask *cpu_mask = cpu_online_mask;
+
+ /* get the cpu_mask of local node */
+ if (its_dev->its->numa_node >= 0)
+ cpu_mask = cpumask_of_node(its_dev->its->numa_node);
/* Bind the LPI to the first possible CPU */
- its_dev->event_map.col_map[event] = cpumask_first(cpu_online_mask);
+ its_dev->event_map.col_map[event] = cpumask_first(cpu_mask);
/* Map the GIC IRQ and event to the device */
its_send_mapvi(its_dev, d->hwirq, event);
its->flags |= ITS_FLAGS_WORKAROUND_CAVIUM_22375;
}
+static void __maybe_unused its_enable_quirk_cavium_23144(void *data)
+{
+ struct its_node *its = data;
+
+ its->flags |= ITS_FLAGS_WORKAROUND_CAVIUM_23144;
+}
+
static const struct gic_quirk its_quirks[] = {
#ifdef CONFIG_CAVIUM_ERRATUM_22375
{
.mask = 0xffff0fff,
.init = its_enable_quirk_cavium_22375,
},
+#endif
+#ifdef CONFIG_CAVIUM_ERRATUM_23144
+ {
+ .desc = "ITS: Cavium erratum 23144",
+ .iidr = 0xa100034c, /* ThunderX pass 1.x */
+ .mask = 0xffff0fff,
+ .init = its_enable_quirk_cavium_23144,
+ },
#endif
{
}
its->base = its_base;
its->phys_base = res.start;
its->ite_size = ((readl_relaxed(its_base + GITS_TYPER) >> 4) & 0xf) + 1;
+ its->numa_node = of_node_to_nid(node);
its->cmd_base = kzalloc(ITS_CMD_QUEUE_SZ, GFP_KERNEL);
if (!its->cmd_base) {
while (count--) {
val = readl_relaxed(rbase + GICR_WAKER);
- if (enable ^ (val & GICR_WAKER_ChildrenAsleep))
+ if (enable ^ (bool)(val & GICR_WAKER_ChildrenAsleep))
break;
cpu_relax();
udelay(1);
/* set polarity for external interrupts only */
for (i = 0; i < ARRAY_SIZE(priv->ext_irqs); i++) {
if (priv->ext_irqs[i] == data->hwirq) {
- ret = pic32_set_ext_polarity(i + 1, flow_type);
+ ret = pic32_set_ext_polarity(i, flow_type);
if (ret)
return ret;
}
goto err_m2m;
/* Initialize continious memory allocator */
+ vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
gsc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
if (IS_ERR(gsc->alloc_ctx)) {
ret = PTR_ERR(gsc->alloc_ctx);
v4l2_device_unregister(&gsc->v4l2_dev);
vb2_dma_contig_cleanup_ctx(gsc->alloc_ctx);
+ vb2_dma_contig_clear_max_seg_size(&pdev->dev);
pm_runtime_disable(&pdev->dev);
gsc_clk_put(gsc);
}
/* Initialize contiguous memory allocator */
+ vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
if (IS_ERR(fimc->alloc_ctx)) {
ret = PTR_ERR(fimc->alloc_ctx);
fimc_unregister_capture_subdev(fimc);
vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx);
+ vb2_dma_contig_clear_max_seg_size(&pdev->dev);
clk_disable(fimc->clock[CLK_BUS]);
fimc_clk_put(fimc);
if (ret < 0)
goto err_pm;
+ vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
is->alloc_ctx = vb2_dma_contig_init_ctx(dev);
if (IS_ERR(is->alloc_ctx)) {
ret = PTR_ERR(is->alloc_ctx);
free_irq(is->irq, is);
fimc_is_unregister_subdevs(is);
vb2_dma_contig_cleanup_ctx(is->alloc_ctx);
+ vb2_dma_contig_clear_max_seg_size(dev);
fimc_is_put_clocks(is);
fimc_is_debugfs_remove(is);
release_firmware(is->fw.f_w);
goto err_sd;
}
+ vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
if (IS_ERR(fimc->alloc_ctx)) {
ret = PTR_ERR(fimc->alloc_ctx);
pm_runtime_set_suspended(dev);
fimc_lite_unregister_capture_subdev(fimc);
vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx);
+ vb2_dma_contig_clear_max_seg_size(dev);
fimc_lite_clk_put(fimc);
dev_info(dev, "Driver unloaded\n");
goto put_clk_gate;
}
+ vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
dev->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
if (IS_ERR(dev->alloc_ctx)) {
ret = PTR_ERR(dev->alloc_ctx);
video_unregister_device(dev->vfd);
v4l2_device_unregister(&dev->v4l2_dev);
vb2_dma_contig_cleanup_ctx(dev->alloc_ctx);
+ vb2_dma_contig_clear_max_seg_size(&pdev->dev);
clk_unprepare(dev->gate);
clk_put(dev->gate);
clk_unprepare(dev->clk);
goto device_register_rollback;
}
+ vb2_dma_contig_set_max_seg_size(&pdev->dev, DMA_BIT_MASK(32));
jpeg->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev);
if (IS_ERR(jpeg->alloc_ctx)) {
v4l2_err(&jpeg->v4l2_dev, "Failed to init memory allocator\n");
video_unregister_device(jpeg->vfd_decoder);
video_unregister_device(jpeg->vfd_encoder);
vb2_dma_contig_cleanup_ctx(jpeg->alloc_ctx);
+ vb2_dma_contig_clear_max_seg_size(&pdev->dev);
v4l2_m2m_release(jpeg->m2m_dev);
v4l2_device_unregister(&jpeg->v4l2_dev);
#include <media/v4l2-event.h>
#include <linux/workqueue.h>
#include <linux/of.h>
+#include <linux/of_reserved_mem.h>
#include <media/videobuf2-v4l2.h>
#include "s5p_mfc_common.h"
#include "s5p_mfc_ctrl.h"
#include "s5p_mfc_dec.h"
#include "s5p_mfc_enc.h"
#include "s5p_mfc_intr.h"
+#include "s5p_mfc_iommu.h"
#include "s5p_mfc_opr.h"
#include "s5p_mfc_cmd.h"
#include "s5p_mfc_pm.h"
.mmap = s5p_mfc_mmap,
};
-static int match_child(struct device *dev, void *data)
+/* DMA memory related helper functions */
+static void s5p_mfc_memdev_release(struct device *dev)
{
- if (!dev_name(dev))
- return 0;
- return !strcmp(dev_name(dev), (char *)data);
+ of_reserved_mem_device_release(dev);
}
-static void *mfc_get_drv_data(struct platform_device *pdev);
-
-static int s5p_mfc_alloc_memdevs(struct s5p_mfc_dev *dev)
+static struct device *s5p_mfc_alloc_memdev(struct device *dev,
+ const char *name, unsigned int idx)
{
- unsigned int mem_info[2] = { };
+ struct device *child;
+ int ret;
- dev->mem_dev_l = devm_kzalloc(&dev->plat_dev->dev,
- sizeof(struct device), GFP_KERNEL);
- if (!dev->mem_dev_l) {
- mfc_err("Not enough memory\n");
- return -ENOMEM;
- }
- device_initialize(dev->mem_dev_l);
- of_property_read_u32_array(dev->plat_dev->dev.of_node,
- "samsung,mfc-l", mem_info, 2);
- if (dma_declare_coherent_memory(dev->mem_dev_l, mem_info[0],
- mem_info[0], mem_info[1],
- DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0) {
- mfc_err("Failed to declare coherent memory for\n"
- "MFC device\n");
- return -ENOMEM;
+ child = devm_kzalloc(dev, sizeof(struct device), GFP_KERNEL);
+ if (!child)
+ return NULL;
+
+ device_initialize(child);
+ dev_set_name(child, "%s:%s", dev_name(dev), name);
+ child->parent = dev;
+ child->bus = dev->bus;
+ child->coherent_dma_mask = dev->coherent_dma_mask;
+ child->dma_mask = dev->dma_mask;
+ child->release = s5p_mfc_memdev_release;
+
+ if (device_add(child) == 0) {
+ ret = of_reserved_mem_device_init_by_idx(child, dev->of_node,
+ idx);
+ if (ret == 0)
+ return child;
}
- dev->mem_dev_r = devm_kzalloc(&dev->plat_dev->dev,
- sizeof(struct device), GFP_KERNEL);
- if (!dev->mem_dev_r) {
- mfc_err("Not enough memory\n");
- return -ENOMEM;
+ put_device(child);
+ return NULL;
+}
+
+static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
+{
+ struct device *dev = &mfc_dev->plat_dev->dev;
+
+ /*
+ * When IOMMU is available, we cannot use the default configuration,
+ * because of MFC firmware requirements: address space limited to
+ * 256M and non-zero default start address.
+ * This is still simplified, not optimal configuration, but for now
+ * IOMMU core doesn't allow to configure device's IOMMUs channel
+ * separately.
+ */
+ if (exynos_is_iommu_available(dev)) {
+ int ret = exynos_configure_iommu(dev, S5P_MFC_IOMMU_DMA_BASE,
+ S5P_MFC_IOMMU_DMA_SIZE);
+ if (ret == 0)
+ mfc_dev->mem_dev_l = mfc_dev->mem_dev_r = dev;
+ return ret;
}
- device_initialize(dev->mem_dev_r);
- of_property_read_u32_array(dev->plat_dev->dev.of_node,
- "samsung,mfc-r", mem_info, 2);
- if (dma_declare_coherent_memory(dev->mem_dev_r, mem_info[0],
- mem_info[0], mem_info[1],
- DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0) {
- pr_err("Failed to declare coherent memory for\n"
- "MFC device\n");
- return -ENOMEM;
+
+ /*
+ * Create and initialize virtual devices for accessing
+ * reserved memory regions.
+ */
+ mfc_dev->mem_dev_l = s5p_mfc_alloc_memdev(dev, "left",
+ MFC_BANK1_ALLOC_CTX);
+ if (!mfc_dev->mem_dev_l)
+ return -ENODEV;
+ mfc_dev->mem_dev_r = s5p_mfc_alloc_memdev(dev, "right",
+ MFC_BANK2_ALLOC_CTX);
+ if (!mfc_dev->mem_dev_r) {
+ device_unregister(mfc_dev->mem_dev_l);
+ return -ENODEV;
}
+
return 0;
}
+static void s5p_mfc_unconfigure_dma_memory(struct s5p_mfc_dev *mfc_dev)
+{
+ struct device *dev = &mfc_dev->plat_dev->dev;
+
+ if (exynos_is_iommu_available(dev)) {
+ exynos_unconfigure_iommu(dev);
+ return;
+ }
+
+ device_unregister(mfc_dev->mem_dev_l);
+ device_unregister(mfc_dev->mem_dev_r);
+}
+
+static void *mfc_get_drv_data(struct platform_device *pdev);
+
/* MFC probe function */
static int s5p_mfc_probe(struct platform_device *pdev)
{
dev->variant = mfc_get_drv_data(pdev);
- ret = s5p_mfc_init_pm(dev);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to get mfc clock source\n");
- return ret;
- }
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dev->regs_base = devm_ioremap_resource(&pdev->dev, res);
goto err_res;
}
- if (pdev->dev.of_node) {
- ret = s5p_mfc_alloc_memdevs(dev);
- if (ret < 0)
- goto err_res;
- } else {
- dev->mem_dev_l = device_find_child(&dev->plat_dev->dev,
- "s5p-mfc-l", match_child);
- if (!dev->mem_dev_l) {
- mfc_err("Mem child (L) device get failed\n");
- ret = -ENODEV;
- goto err_res;
- }
- dev->mem_dev_r = device_find_child(&dev->plat_dev->dev,
- "s5p-mfc-r", match_child);
- if (!dev->mem_dev_r) {
- mfc_err("Mem child (R) device get failed\n");
- ret = -ENODEV;
- goto err_res;
- }
+ ret = s5p_mfc_configure_dma_memory(dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to configure DMA memory\n");
+ return ret;
}
+ ret = s5p_mfc_init_pm(dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get mfc clock source\n");
+ return ret;
+ }
+
+ vb2_dma_contig_set_max_seg_size(dev->mem_dev_l, DMA_BIT_MASK(32));
dev->alloc_ctx[0] = vb2_dma_contig_init_ctx(dev->mem_dev_l);
if (IS_ERR(dev->alloc_ctx[0])) {
ret = PTR_ERR(dev->alloc_ctx[0]);
goto err_res;
}
+ vb2_dma_contig_set_max_seg_size(dev->mem_dev_r, DMA_BIT_MASK(32));
dev->alloc_ctx[1] = vb2_dma_contig_init_ctx(dev->mem_dev_r);
if (IS_ERR(dev->alloc_ctx[1])) {
ret = PTR_ERR(dev->alloc_ctx[1]);
vfd->vfl_dir = VFL_DIR_M2M;
snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_DEC_NAME);
dev->vfd_dec = vfd;
- ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
- if (ret) {
- v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
- video_device_release(vfd);
- goto err_dec_reg;
- }
- v4l2_info(&dev->v4l2_dev,
- "decoder registered as /dev/video%d\n", vfd->num);
video_set_drvdata(vfd, dev);
/* encoder */
vfd->vfl_dir = VFL_DIR_M2M;
snprintf(vfd->name, sizeof(vfd->name), "%s", S5P_MFC_ENC_NAME);
dev->vfd_enc = vfd;
- ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
- if (ret) {
- v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
- video_device_release(vfd);
- goto err_enc_reg;
- }
- v4l2_info(&dev->v4l2_dev,
- "encoder registered as /dev/video%d\n", vfd->num);
video_set_drvdata(vfd, dev);
platform_set_drvdata(pdev, dev);
s5p_mfc_init_hw_cmds(dev);
s5p_mfc_init_regs(dev);
+ /* Register decoder and encoder */
+ ret = video_register_device(dev->vfd_dec, VFL_TYPE_GRABBER, 0);
+ if (ret) {
+ v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
+ video_device_release(dev->vfd_dec);
+ goto err_dec_reg;
+ }
+ v4l2_info(&dev->v4l2_dev,
+ "decoder registered as /dev/video%d\n", dev->vfd_dec->num);
+
+ ret = video_register_device(dev->vfd_enc, VFL_TYPE_GRABBER, 0);
+ if (ret) {
+ v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
+ video_device_release(dev->vfd_enc);
+ goto err_enc_reg;
+ }
+ v4l2_info(&dev->v4l2_dev,
+ "encoder registered as /dev/video%d\n", dev->vfd_enc->num);
+
pr_debug("%s--\n", __func__);
return 0;
/* Deinit MFC if probe had failed */
err_enc_reg:
- video_device_release(dev->vfd_enc);
-err_enc_alloc:
video_unregister_device(dev->vfd_dec);
err_dec_reg:
+ video_device_release(dev->vfd_enc);
+err_enc_alloc:
video_device_release(dev->vfd_dec);
err_dec_alloc:
v4l2_device_unregister(&dev->v4l2_dev);
s5p_mfc_release_firmware(dev);
vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[0]);
vb2_dma_contig_cleanup_ctx(dev->alloc_ctx[1]);
- if (pdev->dev.of_node) {
- put_device(dev->mem_dev_l);
- put_device(dev->mem_dev_r);
- }
+ s5p_mfc_unconfigure_dma_memory(dev);
+ vb2_dma_contig_clear_max_seg_size(dev->mem_dev_l);
+ vb2_dma_contig_clear_max_seg_size(dev->mem_dev_r);
s5p_mfc_final_pm(dev);
return 0;
--- /dev/null
+/*
+ * Copyright (C) 2015 Samsung Electronics Co.Ltd
+ * Authors: Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef S5P_MFC_IOMMU_H_
+#define S5P_MFC_IOMMU_H_
+
+#define S5P_MFC_IOMMU_DMA_BASE 0x20000000lu
+#define S5P_MFC_IOMMU_DMA_SIZE SZ_256M
+
+#ifdef CONFIG_EXYNOS_IOMMU
+
+#include <asm/dma-iommu.h>
+
+static inline bool exynos_is_iommu_available(struct device *dev)
+{
+ return dev->archdata.iommu != NULL;
+}
+
+static inline void exynos_unconfigure_iommu(struct device *dev)
+{
+ struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev);
+
+ arm_iommu_detach_device(dev);
+ arm_iommu_release_mapping(mapping);
+}
+
+static inline int exynos_configure_iommu(struct device *dev,
+ unsigned int base, unsigned int size)
+{
+ struct dma_iommu_mapping *mapping = NULL;
+ int ret;
+
+ /* Disable the default mapping created by device core */
+ if (to_dma_iommu_mapping(dev))
+ exynos_unconfigure_iommu(dev);
+
+ mapping = arm_iommu_create_mapping(dev->bus, base, size);
+ if (IS_ERR(mapping)) {
+ pr_warn("Failed to create IOMMU mapping for device %s\n",
+ dev_name(dev));
+ return PTR_ERR(mapping);
+ }
+
+ ret = arm_iommu_attach_device(dev, mapping);
+ if (ret) {
+ pr_warn("Failed to attached device %s to IOMMU_mapping\n",
+ dev_name(dev));
+ arm_iommu_release_mapping(mapping);
+ return ret;
+ }
+
+ return 0;
+}
+
+#else
+
+static inline bool exynos_is_iommu_available(struct device *dev)
+{
+ return false;
+}
+
+static inline int exynos_configure_iommu(struct device *dev,
+ unsigned int base, unsigned int size)
+{
+ return -ENOSYS;
+}
+
+static inline void exynos_unconfigure_iommu(struct device *dev) { }
+
+#endif
+
+#endif /* S5P_MFC_IOMMU_H_ */
goto fail;
}
+ vb2_dma_contig_set_max_seg_size(mdev->dev, DMA_BIT_MASK(32));
mdev->alloc_ctx = vb2_dma_contig_init_ctx(mdev->dev);
if (IS_ERR(mdev->alloc_ctx)) {
mxr_err(mdev, "could not acquire vb2 allocator\n");
kfree(mdev->output[i]);
vb2_dma_contig_cleanup_ctx(mdev->alloc_ctx);
+ vb2_dma_contig_clear_max_seg_size(mdev->dev);
v4l2_device_unregister(&mdev->v4l2_dev);
}
static int uvc_v4l2_get_xu_mapping(struct uvc_xu_control_mapping *kp,
const struct uvc_xu_control_mapping32 __user *up)
{
- struct uvc_menu_info __user *umenus;
- struct uvc_menu_info __user *kmenus;
compat_caddr_t p;
if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
if (__get_user(p, &up->menu_info))
return -EFAULT;
- umenus = compat_ptr(p);
- if (!access_ok(VERIFY_READ, umenus, kp->menu_count * sizeof(*umenus)))
- return -EFAULT;
-
- kmenus = compat_alloc_user_space(kp->menu_count * sizeof(*kmenus));
- if (kmenus == NULL)
- return -EFAULT;
- kp->menu_info = kmenus;
-
- if (copy_in_user(kmenus, umenus, kp->menu_count * sizeof(*umenus)))
- return -EFAULT;
+ kp->menu_info = compat_ptr(p);
return 0;
}
static int uvc_v4l2_put_xu_mapping(const struct uvc_xu_control_mapping *kp,
struct uvc_xu_control_mapping32 __user *up)
{
- struct uvc_menu_info __user *umenus;
- struct uvc_menu_info __user *kmenus = kp->menu_info;
- compat_caddr_t p;
-
if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
__copy_to_user(up, kp, offsetof(typeof(*up), menu_info)) ||
__put_user(kp->menu_count, &up->menu_count))
if (__clear_user(up->reserved, sizeof(up->reserved)))
return -EFAULT;
- if (kp->menu_count == 0)
- return 0;
-
- if (get_user(p, &up->menu_info))
- return -EFAULT;
- umenus = compat_ptr(p);
-
- if (copy_in_user(umenus, kmenus, kp->menu_count * sizeof(*umenus)))
- return -EFAULT;
-
return 0;
}
static int uvc_v4l2_get_xu_query(struct uvc_xu_control_query *kp,
const struct uvc_xu_control_query32 __user *up)
{
- u8 __user *udata;
- u8 __user *kdata;
compat_caddr_t p;
if (!access_ok(VERIFY_READ, up, sizeof(*up)) ||
if (__get_user(p, &up->data))
return -EFAULT;
- udata = compat_ptr(p);
- if (!access_ok(VERIFY_READ, udata, kp->size))
- return -EFAULT;
-
- kdata = compat_alloc_user_space(kp->size);
- if (kdata == NULL)
- return -EFAULT;
- kp->data = kdata;
-
- if (copy_in_user(kdata, udata, kp->size))
- return -EFAULT;
+ kp->data = compat_ptr(p);
return 0;
}
static int uvc_v4l2_put_xu_query(const struct uvc_xu_control_query *kp,
struct uvc_xu_control_query32 __user *up)
{
- u8 __user *udata;
- u8 __user *kdata = kp->data;
- compat_caddr_t p;
-
if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) ||
__copy_to_user(up, kp, offsetof(typeof(*up), data)))
return -EFAULT;
- if (kp->size == 0)
- return 0;
-
- if (get_user(p, &up->data))
- return -EFAULT;
- udata = compat_ptr(p);
- if (!access_ok(VERIFY_READ, udata, kp->size))
- return -EFAULT;
-
- if (copy_in_user(udata, kdata, kp->size))
- return -EFAULT;
-
return 0;
}
static long uvc_v4l2_compat_ioctl32(struct file *file,
unsigned int cmd, unsigned long arg)
{
+ struct uvc_fh *handle = file->private_data;
union {
struct uvc_xu_control_mapping xmap;
struct uvc_xu_control_query xqry;
} karg;
void __user *up = compat_ptr(arg);
- mm_segment_t old_fs;
long ret;
switch (cmd) {
case UVCIOC_CTRL_MAP32:
- cmd = UVCIOC_CTRL_MAP;
ret = uvc_v4l2_get_xu_mapping(&karg.xmap, up);
+ if (ret)
+ return ret;
+ ret = uvc_ioctl_ctrl_map(handle->chain, &karg.xmap);
+ if (ret)
+ return ret;
+ ret = uvc_v4l2_put_xu_mapping(&karg.xmap, up);
+ if (ret)
+ return ret;
+
break;
case UVCIOC_CTRL_QUERY32:
- cmd = UVCIOC_CTRL_QUERY;
ret = uvc_v4l2_get_xu_query(&karg.xqry, up);
+ if (ret)
+ return ret;
+ ret = uvc_xu_ctrl_query(handle->chain, &karg.xqry);
+ if (ret)
+ return ret;
+ ret = uvc_v4l2_put_xu_query(&karg.xqry, up);
+ if (ret)
+ return ret;
break;
default:
return -ENOIOCTLCMD;
}
- old_fs = get_fs();
- set_fs(KERNEL_DS);
- ret = video_ioctl2(file, cmd, (unsigned long)&karg);
- set_fs(old_fs);
-
- if (ret < 0)
- return ret;
-
- switch (cmd) {
- case UVCIOC_CTRL_MAP:
- ret = uvc_v4l2_put_xu_mapping(&karg.xmap, up);
- break;
-
- case UVCIOC_CTRL_QUERY:
- ret = uvc_v4l2_put_xu_query(&karg.xqry, up);
- break;
- }
-
return ret;
}
#endif
}
EXPORT_SYMBOL_GPL(vb2_dma_contig_cleanup_ctx);
+/**
+ * vb2_dma_contig_set_max_seg_size() - configure DMA max segment size
+ * @dev: device for configuring DMA parameters
+ * @size: size of DMA max segment size to set
+ *
+ * To allow mapping the scatter-list into a single chunk in the DMA
+ * address space, the device is required to have the DMA max segment
+ * size parameter set to a value larger than the buffer size. Otherwise,
+ * the DMA-mapping subsystem will split the mapping into max segment
+ * size chunks. This function sets the DMA max segment size
+ * parameter to let DMA-mapping map a buffer as a single chunk in DMA
+ * address space.
+ * This code assumes that the DMA-mapping subsystem will merge all
+ * scatterlist segments if this is really possible (for example when
+ * an IOMMU is available and enabled).
+ * Ideally, this parameter should be set by the generic bus code, but it
+ * is left with the default 64KiB value due to historical litmiations in
+ * other subsystems (like limited USB host drivers) and there no good
+ * place to set it to the proper value.
+ * This function should be called from the drivers, which are known to
+ * operate on platforms with IOMMU and provide access to shared buffers
+ * (either USERPTR or DMABUF). This should be done before initializing
+ * videobuf2 queue.
+ */
+int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size)
+{
+ if (!dev->dma_parms) {
+ dev->dma_parms = kzalloc(sizeof(dev->dma_parms), GFP_KERNEL);
+ if (!dev->dma_parms)
+ return -ENOMEM;
+ }
+ if (dma_get_max_seg_size(dev) < size)
+ return dma_set_max_seg_size(dev, size);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(vb2_dma_contig_set_max_seg_size);
+
+/*
+ * vb2_dma_contig_clear_max_seg_size() - release resources for DMA parameters
+ * @dev: device for configuring DMA parameters
+ *
+ * This function releases resources allocated to configure DMA parameters
+ * (see vb2_dma_contig_set_max_seg_size() function). It should be called from
+ * device drivers on driver remove.
+ */
+void vb2_dma_contig_clear_max_seg_size(struct device *dev)
+{
+ kfree(dev->dma_parms);
+ dev->dma_parms = NULL;
+}
+EXPORT_SYMBOL_GPL(vb2_dma_contig_clear_max_seg_size);
+
MODULE_DESCRIPTION("DMA-contig memory handling routines for videobuf2");
MODULE_AUTHOR("Pawel Osciak <pawel@osciak.com>");
MODULE_LICENSE("GPL");
* switch to HS200 mode if bus width is set successfully.
*/
err = mmc_select_bus_width(card);
- if (!err) {
+ if (err >= 0) {
val = EXT_CSD_TIMING_HS200 |
card->drive_strength << EXT_CSD_DRV_STR_SHIFT;
err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
} else if (mmc_card_hs(card)) {
/* Select the desired bus width optionally */
err = mmc_select_bus_width(card);
- if (!err) {
+ if (err >= 0) {
err = mmc_select_hs_ddr(card);
if (err)
goto free_card;
[SDXC_CLK_400K] = { .output = 180, .sample = 180 },
[SDXC_CLK_25M] = { .output = 180, .sample = 75 },
[SDXC_CLK_50M] = { .output = 150, .sample = 120 },
- [SDXC_CLK_50M_DDR] = { .output = 90, .sample = 120 },
- [SDXC_CLK_50M_DDR_8BIT] = { .output = 90, .sample = 120 },
+ [SDXC_CLK_50M_DDR] = { .output = 54, .sample = 36 },
+ [SDXC_CLK_50M_DDR_8BIT] = { .output = 72, .sample = 72 },
};
static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host,
MMC_CAP_1_8V_DDR |
MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ;
- /* TODO MMC DDR is not working on A80 */
- if (of_device_is_compatible(pdev->dev.of_node,
- "allwinner,sun9i-a80-mmc"))
- mmc->caps &= ~MMC_CAP_1_8V_DDR;
-
ret = mmc_of_parse(mmc);
if (ret)
goto error_free_dma;
priv->bus = bus;
bus->priv = priv;
bus->parent = priv->dev;
- bus->name = "Synopsys MII Bus",
+ bus->name = "Synopsys MII Bus";
bus->read = &arc_mdio_read;
bus->write = &arc_mdio_write;
bus->reset = &arc_mdio_reset;
unsigned int rx_ringsz;
unsigned int rxbuf_size;
+ struct page *rx_page;
+ unsigned int rx_page_offset;
+ unsigned int rx_frag_size;
+
struct napi_struct napi;
struct alx_tx_queue txq;
struct alx_rx_queue rxq;
}
}
+static struct sk_buff *alx_alloc_skb(struct alx_priv *alx, gfp_t gfp)
+{
+ struct sk_buff *skb;
+ struct page *page;
+
+ if (alx->rx_frag_size > PAGE_SIZE)
+ return __netdev_alloc_skb(alx->dev, alx->rxbuf_size, gfp);
+
+ page = alx->rx_page;
+ if (!page) {
+ alx->rx_page = page = alloc_page(gfp);
+ if (unlikely(!page))
+ return NULL;
+ alx->rx_page_offset = 0;
+ }
+
+ skb = build_skb(page_address(page) + alx->rx_page_offset,
+ alx->rx_frag_size);
+ if (likely(skb)) {
+ alx->rx_page_offset += alx->rx_frag_size;
+ if (alx->rx_page_offset >= PAGE_SIZE)
+ alx->rx_page = NULL;
+ else
+ get_page(page);
+ }
+ return skb;
+}
+
+
static int alx_refill_rx_ring(struct alx_priv *alx, gfp_t gfp)
{
struct alx_rx_queue *rxq = &alx->rxq;
while (!cur_buf->skb && next != rxq->read_idx) {
struct alx_rfd *rfd = &rxq->rfd[cur];
- skb = __netdev_alloc_skb(alx->dev, alx->rxbuf_size, gfp);
+ skb = alx_alloc_skb(alx, gfp);
if (!skb)
break;
dma = dma_map_single(&alx->hw.pdev->dev,
alx_write_mem16(&alx->hw, ALX_RFD_PIDX, cur);
}
+
return count;
}
kfree(alx->txq.bufs);
kfree(alx->rxq.bufs);
+ if (alx->rx_page) {
+ put_page(alx->rx_page);
+ alx->rx_page = NULL;
+ }
+
dma_free_coherent(&alx->hw.pdev->dev,
alx->descmem.size,
alx->descmem.virt,
alx->dev->name, alx);
if (!err)
goto out;
+
/* fall back to legacy interrupt */
pci_disable_msi(alx->hw.pdev);
}
struct pci_dev *pdev = alx->hw.pdev;
struct alx_hw *hw = &alx->hw;
int err;
+ unsigned int head_size;
err = alx_identify_hw(alx);
if (err) {
hw->smb_timer = 400;
hw->mtu = alx->dev->mtu;
+
alx->rxbuf_size = ALX_MAX_FRAME_LEN(hw->mtu);
+ head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) +
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+ alx->rx_frag_size = roundup_pow_of_two(head_size);
+
alx->tx_ringsz = 256;
alx->rx_ringsz = 512;
hw->imt = 200;
{
struct alx_priv *alx = netdev_priv(netdev);
int max_frame = ALX_MAX_FRAME_LEN(mtu);
+ unsigned int head_size;
if ((max_frame < ALX_MIN_FRAME_SIZE) ||
(max_frame > ALX_MAX_FRAME_SIZE))
netdev->mtu = mtu;
alx->hw.mtu = mtu;
alx->rxbuf_size = max(max_frame, ALX_DEF_RXBUF_SIZE);
+ head_size = SKB_DATA_ALIGN(alx->rxbuf_size + NET_SKB_PAD) +
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+ alx->rx_frag_size = roundup_pow_of_two(head_size);
netdev_update_features(netdev);
if (netif_running(netdev))
alx_reinit(alx);
return rc;
}
-int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp)
+static int bnx2x_vlan_configure_vid_list(struct bnx2x *bp)
{
struct bnx2x_vlan_entry *vlan;
int rc = 0;
- if (!bp->vlan_cnt) {
- DP(NETIF_MSG_IFUP, "No need to re-configure vlan filters\n");
- return 0;
- }
-
+ /* Configure all non-configured entries */
list_for_each_entry(vlan, &bp->vlan_reg, link) {
- /* Prepare for cleanup in case of errors */
- if (rc) {
- vlan->hw = false;
- continue;
- }
-
- if (!vlan->hw)
+ if (vlan->hw)
continue;
- DP(NETIF_MSG_IFUP, "Re-configuring vlan 0x%04x\n", vlan->vid);
+ if (bp->vlan_cnt >= bp->vlan_credit)
+ return -ENOBUFS;
rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true);
if (rc) {
- BNX2X_ERR("Unable to configure VLAN %d\n", vlan->vid);
- vlan->hw = false;
- rc = -EINVAL;
- continue;
+ BNX2X_ERR("Unable to config VLAN %d\n", vlan->vid);
+ return rc;
}
+
+ DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n", vlan->vid);
+ vlan->hw = true;
+ bp->vlan_cnt++;
}
- return rc;
+ return 0;
+}
+
+static void bnx2x_vlan_configure(struct bnx2x *bp, bool set_rx_mode)
+{
+ bool need_accept_any_vlan;
+
+ need_accept_any_vlan = !!bnx2x_vlan_configure_vid_list(bp);
+
+ if (bp->accept_any_vlan != need_accept_any_vlan) {
+ bp->accept_any_vlan = need_accept_any_vlan;
+ DP(NETIF_MSG_IFUP, "Accept all VLAN %s\n",
+ bp->accept_any_vlan ? "raised" : "cleared");
+ if (set_rx_mode) {
+ if (IS_PF(bp))
+ bnx2x_set_rx_mode_inner(bp);
+ else
+ bnx2x_vfpf_storm_rx_mode(bp);
+ }
+ }
+}
+
+int bnx2x_vlan_reconfigure_vid(struct bnx2x *bp)
+{
+ struct bnx2x_vlan_entry *vlan;
+
+ /* The hw forgot all entries after reload */
+ list_for_each_entry(vlan, &bp->vlan_reg, link)
+ vlan->hw = false;
+ bp->vlan_cnt = 0;
+
+ /* Don't set rx mode here. Our caller will do it. */
+ bnx2x_vlan_configure(bp, false);
+
+ return 0;
}
static int bnx2x_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
{
struct bnx2x *bp = netdev_priv(dev);
struct bnx2x_vlan_entry *vlan;
- bool hw = false;
- int rc = 0;
-
- if (!netif_running(bp->dev)) {
- DP(NETIF_MSG_IFUP,
- "Ignoring VLAN configuration the interface is down\n");
- return -EFAULT;
- }
DP(NETIF_MSG_IFUP, "Adding VLAN %d\n", vid);
if (!vlan)
return -ENOMEM;
- bp->vlan_cnt++;
- if (bp->vlan_cnt > bp->vlan_credit && !bp->accept_any_vlan) {
- DP(NETIF_MSG_IFUP, "Accept all VLAN raised\n");
- bp->accept_any_vlan = true;
- if (IS_PF(bp))
- bnx2x_set_rx_mode_inner(bp);
- else
- bnx2x_vfpf_storm_rx_mode(bp);
- } else if (bp->vlan_cnt <= bp->vlan_credit) {
- rc = __bnx2x_vlan_configure_vid(bp, vid, true);
- hw = true;
- }
-
vlan->vid = vid;
- vlan->hw = hw;
+ vlan->hw = false;
+ list_add_tail(&vlan->link, &bp->vlan_reg);
- if (!rc) {
- list_add(&vlan->link, &bp->vlan_reg);
- } else {
- bp->vlan_cnt--;
- kfree(vlan);
- }
-
- DP(NETIF_MSG_IFUP, "Adding VLAN result %d\n", rc);
+ if (netif_running(dev))
+ bnx2x_vlan_configure(bp, true);
- return rc;
+ return 0;
}
static int bnx2x_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
{
struct bnx2x *bp = netdev_priv(dev);
struct bnx2x_vlan_entry *vlan;
+ bool found = false;
int rc = 0;
- if (!netif_running(bp->dev)) {
- DP(NETIF_MSG_IFUP,
- "Ignoring VLAN configuration the interface is down\n");
- return -EFAULT;
- }
-
DP(NETIF_MSG_IFUP, "Removing VLAN %d\n", vid);
- if (!bp->vlan_cnt) {
- BNX2X_ERR("Unable to kill VLAN %d\n", vid);
- return -EINVAL;
- }
-
list_for_each_entry(vlan, &bp->vlan_reg, link)
- if (vlan->vid == vid)
+ if (vlan->vid == vid) {
+ found = true;
break;
+ }
- if (vlan->vid != vid) {
+ if (!found) {
BNX2X_ERR("Unable to kill VLAN %d - not found\n", vid);
return -EINVAL;
}
- if (vlan->hw)
+ if (netif_running(dev) && vlan->hw) {
rc = __bnx2x_vlan_configure_vid(bp, vid, false);
+ DP(NETIF_MSG_IFUP, "HW deconfigured for VLAN %d\n", vid);
+ bp->vlan_cnt--;
+ }
list_del(&vlan->link);
kfree(vlan);
- bp->vlan_cnt--;
-
- if (bp->vlan_cnt <= bp->vlan_credit && bp->accept_any_vlan) {
- /* Configure all non-configured entries */
- list_for_each_entry(vlan, &bp->vlan_reg, link) {
- if (vlan->hw)
- continue;
-
- rc = __bnx2x_vlan_configure_vid(bp, vlan->vid, true);
- if (rc) {
- BNX2X_ERR("Unable to config VLAN %d\n",
- vlan->vid);
- continue;
- }
- DP(NETIF_MSG_IFUP, "HW configured for VLAN %d\n",
- vlan->vid);
- vlan->hw = true;
- }
- DP(NETIF_MSG_IFUP, "Accept all VLAN Removed\n");
- bp->accept_any_vlan = false;
- if (IS_PF(bp))
- bnx2x_set_rx_mode_inner(bp);
- else
- bnx2x_vfpf_storm_rx_mode(bp);
- }
+ if (netif_running(dev))
+ bnx2x_vlan_configure(bp, true);
DP(NETIF_MSG_IFUP, "Removing VLAN result %d\n", rc);
bp->doorbells = bnx2x_vf_doorbells(bp);
rc = bnx2x_vf_pci_alloc(bp);
if (rc)
- goto init_one_exit;
+ goto init_one_freemem;
} else {
doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT);
if (doorbell_size > pci_resource_len(pdev, 2)) {
dev_err(&bp->pdev->dev,
"Cannot map doorbells, bar size too small, aborting\n");
rc = -ENOMEM;
- goto init_one_exit;
+ goto init_one_freemem;
}
bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2),
doorbell_size);
dev_err(&bp->pdev->dev,
"Cannot map doorbell space, aborting\n");
rc = -ENOMEM;
- goto init_one_exit;
+ goto init_one_freemem;
}
if (IS_VF(bp)) {
rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count);
if (rc)
- goto init_one_exit;
+ goto init_one_freemem;
}
/* Enable SRIOV if capability found in configuration space */
rc = bnx2x_iov_init_one(bp, int_mode, BNX2X_MAX_NUM_OF_VFS);
if (rc)
- goto init_one_exit;
+ goto init_one_freemem;
/* calc qm_cid_count */
bp->qm_cid_count = bnx2x_set_qm_cid_count(bp);
rc = bnx2x_set_int_mode(bp);
if (rc) {
dev_err(&pdev->dev, "Cannot set interrupts\n");
- goto init_one_exit;
+ goto init_one_freemem;
}
BNX2X_DEV_INFO("set interrupts successfully\n");
rc = register_netdev(dev);
if (rc) {
dev_err(&pdev->dev, "Cannot register net device\n");
- goto init_one_exit;
+ goto init_one_freemem;
}
BNX2X_DEV_INFO("device name after netdev register %s\n", dev->name);
return 0;
+init_one_freemem:
+ bnx2x_free_mem_bp(bp);
+
init_one_exit:
bnx2x_disable_pcie_error_reporting(bp);
cpu_to_le32(DB_KEY_TX_PUSH | DB_LONG_TX_PUSH | prod);
txr->tx_prod = prod;
+ tx_buf->is_push = 1;
netdev_tx_sent_queue(txq, skb->len);
+ wmb(); /* Sync is_push and byte queue before pushing data */
push_len = (length + sizeof(*tx_push) + 7) / 8;
if (push_len > 16) {
push_len);
}
- tx_buf->is_push = 1;
goto tx_done;
}
if (tpa_info->hash_type != PKT_HASH_TYPE_NONE)
skb_set_hash(skb, tpa_info->rss_hash, tpa_info->hash_type);
- if (tpa_info->flags2 & RX_CMP_FLAGS2_META_FORMAT_VLAN) {
- netdev_features_t features = skb->dev->features;
+ if ((tpa_info->flags2 & RX_CMP_FLAGS2_META_FORMAT_VLAN) &&
+ (skb->dev->features & NETIF_F_HW_VLAN_CTAG_RX)) {
u16 vlan_proto = tpa_info->metadata >>
RX_CMP_FLAGS2_METADATA_TPID_SFT;
+ u16 vtag = tpa_info->metadata & RX_CMP_FLAGS2_METADATA_VID_MASK;
- if (((features & NETIF_F_HW_VLAN_CTAG_RX) &&
- vlan_proto == ETH_P_8021Q) ||
- ((features & NETIF_F_HW_VLAN_STAG_RX) &&
- vlan_proto == ETH_P_8021AD)) {
- __vlan_hwaccel_put_tag(skb, htons(vlan_proto),
- tpa_info->metadata &
- RX_CMP_FLAGS2_METADATA_VID_MASK);
- }
+ __vlan_hwaccel_put_tag(skb, htons(vlan_proto), vtag);
}
skb_checksum_none_assert(skb);
skb->protocol = eth_type_trans(skb, dev);
- if (rxcmp1->rx_cmp_flags2 &
- cpu_to_le32(RX_CMP_FLAGS2_META_FORMAT_VLAN)) {
- netdev_features_t features = skb->dev->features;
+ if ((rxcmp1->rx_cmp_flags2 &
+ cpu_to_le32(RX_CMP_FLAGS2_META_FORMAT_VLAN)) &&
+ (skb->dev->features & NETIF_F_HW_VLAN_CTAG_RX)) {
u32 meta_data = le32_to_cpu(rxcmp1->rx_cmp_meta_data);
+ u16 vtag = meta_data & RX_CMP_FLAGS2_METADATA_VID_MASK;
u16 vlan_proto = meta_data >> RX_CMP_FLAGS2_METADATA_TPID_SFT;
- if (((features & NETIF_F_HW_VLAN_CTAG_RX) &&
- vlan_proto == ETH_P_8021Q) ||
- ((features & NETIF_F_HW_VLAN_STAG_RX) &&
- vlan_proto == ETH_P_8021AD))
- __vlan_hwaccel_put_tag(skb, htons(vlan_proto),
- meta_data &
- RX_CMP_FLAGS2_METADATA_VID_MASK);
+ __vlan_hwaccel_put_tag(skb, htons(vlan_proto), vtag);
}
skb_checksum_none_assert(skb);
if (!bnxt_rfs_capable(bp))
features &= ~NETIF_F_NTUPLE;
+
+ /* Both CTAG and STAG VLAN accelaration on the RX side have to be
+ * turned on or off together.
+ */
+ if ((features & (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)) !=
+ (NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_HW_VLAN_STAG_RX)) {
+ if (dev->features & NETIF_F_HW_VLAN_CTAG_RX)
+ features &= ~(NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_HW_VLAN_STAG_RX);
+ else
+ features |= NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_HW_VLAN_STAG_RX;
+ }
+
return features;
}
CH_PCI_ID_TABLE_FENTRY(0x5015), /* T502-bt */
CH_PCI_ID_TABLE_FENTRY(0x5016), /* T580-OCP-SO */
CH_PCI_ID_TABLE_FENTRY(0x5017), /* T520-OCP-SO */
+ CH_PCI_ID_TABLE_FENTRY(0x5018), /* T540-BT */
CH_PCI_ID_TABLE_FENTRY(0x5080), /* Custom T540-cr */
CH_PCI_ID_TABLE_FENTRY(0x5081), /* Custom T540-LL-cr */
CH_PCI_ID_TABLE_FENTRY(0x5082), /* Custom T504-cr */
priv->mdio = mdiobus_alloc();
if (!priv->mdio) {
ret = -ENOMEM;
- goto free;
+ goto free2;
}
priv->mdio->name = "ethoc-mdio";
ret = mdiobus_register(priv->mdio);
if (ret) {
dev_err(&netdev->dev, "failed to register MDIO bus\n");
- goto free;
+ goto free2;
}
ret = ethoc_mdio_probe(netdev);
error:
mdiobus_unregister(priv->mdio);
mdiobus_free(priv->mdio);
-free:
+free2:
if (priv->clk)
clk_disable_unprepare(priv->clk);
+free:
free_netdev(netdev);
out:
return ret;
* re-adding ourselves to the poll list.
*/
- if (priv->tx_skb && !tx_ctrl_ct)
+ if (priv->tx_skb && !tx_ctrl_ct) {
+ nps_enet_reg_set(priv, NPS_ENET_REG_BUF_INT_ENABLE, 0);
napi_reschedule(napi);
+ }
}
return work_done;
fec16_to_cpu(bdp->cbd_datlen),
DMA_TO_DEVICE);
bdp->cbd_bufaddr = cpu_to_fec32(0);
- if (!skb) {
- bdp = fec_enet_get_nextdesc(bdp, &txq->bd);
- continue;
- }
+ if (!skb)
+ goto skb_done;
/* Check for errors. */
if (status & (BD_ENET_TX_HB | BD_ENET_TX_LC |
/* Free the sk buffer associated with this last transmit */
dev_kfree_skb_any(skb);
-
+skb_done:
/* Make sure the update to bdp and tx_skbuff are performed
* before dirty_tx
*/
return -EOPNOTSUPP;
if (ec->rx_max_coalesced_frames > 255) {
- pr_err("Rx coalesced frames exceed hardware limiation");
+ pr_err("Rx coalesced frames exceed hardware limitation\n");
return -EINVAL;
}
if (ec->tx_max_coalesced_frames > 255) {
- pr_err("Tx coalesced frame exceed hardware limiation");
+ pr_err("Tx coalesced frame exceed hardware limitation\n");
return -EINVAL;
}
cycle = fec_enet_us_to_itr_clock(ndev, fep->rx_time_itr);
if (cycle > 0xFFFF) {
- pr_err("Rx coalesed usec exceeed hardware limiation");
+ pr_err("Rx coalesced usec exceed hardware limitation\n");
return -EINVAL;
}
cycle = fec_enet_us_to_itr_clock(ndev, fep->tx_time_itr);
if (cycle > 0xFFFF) {
- pr_err("Rx coalesed usec exceeed hardware limiation");
+ pr_err("Rx coalesced usec exceed hardware limitation\n");
return -EINVAL;
}
tx_queue->tx_ring_size);
if (likely(!nr_frags)) {
- lstatus |= BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT);
+ if (likely(!do_tstamp))
+ lstatus |= BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT);
} else {
u32 lstatus_start = lstatus;
u32 link_stat = priv->link;
struct hnae_handle *h;
- assert(priv && priv->ae_handle);
h = priv->ae_handle;
if (priv->phy) {
{
struct hns_nic_priv *priv = netdev_priv(net_dev);
- assert(priv);
-
strncpy(drvinfo->version, HNAE_DRIVER_VERSION,
sizeof(drvinfo->version));
drvinfo->version[sizeof(drvinfo->version) - 1] = '\0';
struct hnae_handle *h;
struct hnae_ae_ops *ops;
- assert(priv || priv->ae_handle);
-
h = priv->ae_handle;
ops = h->dev->ops;
struct hnae_ae_ops *ops;
int ret;
- assert(priv || priv->ae_handle);
-
ops = priv->ae_handle->dev->ops;
if (ec->tx_coalesce_usecs != ec->rx_coalesce_usecs)
struct hns_nic_priv *priv = netdev_priv(net_dev);
struct hnae_ae_ops *ops;
- assert(priv || priv->ae_handle);
-
ops = priv->ae_handle->dev->ops;
cmd->version = HNS_CHIP_VERSION;
struct hns_nic_priv *priv = netdev_priv(net_dev);
struct hnae_ae_ops *ops;
- assert(priv || priv->ae_handle);
-
ops = priv->ae_handle->dev->ops;
if (!ops->get_regs_len) {
netdev_err(net_dev, "ops->get_regs_len is null!\n");
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
hwbm_pool->construct = mvneta_bm_construct;
hwbm_pool->priv = new_pool;
+ spin_lock_init(&hwbm_pool->lock);
/* Create new pool */
err = mvneta_bm_pool_create(priv, new_pool);
static void mtk_phy_link_adjust(struct net_device *dev)
{
struct mtk_mac *mac = netdev_priv(dev);
+ u16 lcl_adv = 0, rmt_adv = 0;
+ u8 flowctrl;
u32 mcr = MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG |
MAC_MCR_FORCE_MODE | MAC_MCR_TX_EN |
MAC_MCR_RX_EN | MAC_MCR_BACKOFF_EN |
if (mac->phy_dev->link)
mcr |= MAC_MCR_FORCE_LINK;
- if (mac->phy_dev->duplex)
+ if (mac->phy_dev->duplex) {
mcr |= MAC_MCR_FORCE_DPX;
- if (mac->phy_dev->pause)
- mcr |= MAC_MCR_FORCE_RX_FC | MAC_MCR_FORCE_TX_FC;
+ if (mac->phy_dev->pause)
+ rmt_adv = LPA_PAUSE_CAP;
+ if (mac->phy_dev->asym_pause)
+ rmt_adv |= LPA_PAUSE_ASYM;
+
+ if (mac->phy_dev->advertising & ADVERTISED_Pause)
+ lcl_adv |= ADVERTISE_PAUSE_CAP;
+ if (mac->phy_dev->advertising & ADVERTISED_Asym_Pause)
+ lcl_adv |= ADVERTISE_PAUSE_ASYM;
+
+ flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
+
+ if (flowctrl & FLOW_CTRL_TX)
+ mcr |= MAC_MCR_FORCE_TX_FC;
+ if (flowctrl & FLOW_CTRL_RX)
+ mcr |= MAC_MCR_FORCE_RX_FC;
+
+ netif_dbg(mac->hw, link, dev, "rx pause %s, tx pause %s\n",
+ flowctrl & FLOW_CTRL_RX ? "enabled" : "disabled",
+ flowctrl & FLOW_CTRL_TX ? "enabled" : "disabled");
+ }
mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
u32 val, ge_mode;
np = of_parse_phandle(mac->of_node, "phy-handle", 0);
+ if (!np && of_phy_is_fixed_link(mac->of_node))
+ if (!of_phy_register_fixed_link(mac->of_node))
+ np = of_node_get(mac->of_node);
if (!np)
return -ENODEV;
switch (of_get_phy_mode(np)) {
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_ID:
case PHY_INTERFACE_MODE_RGMII:
ge_mode = 0;
break;
mac->phy_dev->autoneg = AUTONEG_ENABLE;
mac->phy_dev->speed = 0;
mac->phy_dev->duplex = 0;
- mac->phy_dev->supported &= PHY_BASIC_FEATURES;
+ mac->phy_dev->supported &= PHY_GBIT_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause;
mac->phy_dev->advertising = mac->phy_dev->supported |
ADVERTISED_Autoneg;
phy_start_aneg(mac->phy_dev);
return 0;
err_free_bus:
- kfree(eth->mii_bus);
+ mdiobus_free(eth->mii_bus);
err_put_node:
of_node_put(mii_np);
mdiobus_unregister(eth->mii_bus);
of_node_put(eth->mii_bus->dev.of_node);
- kfree(eth->mii_bus);
+ mdiobus_free(eth->mii_bus);
}
static inline void mtk_irq_disable(struct mtk_eth *eth, u32 mask)
for (i = 0; i < NUM_MAIN_STATS; i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
- data[index++] = ((unsigned long *)&priv->stats)[i];
+ data[index++] = ((unsigned long *)&dev->stats)[i];
for (i = 0; i < NUM_PORT_STATS; i++, bitmap_iterator_inc(&it))
if (bitmap_iterator_test(&it))
}
-static struct net_device_stats *mlx4_en_get_stats(struct net_device *dev)
+static struct rtnl_link_stats64 *
+mlx4_en_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
spin_lock_bh(&priv->stats_lock);
- memcpy(&priv->ret_stats, &priv->stats, sizeof(priv->stats));
+ netdev_stats_to_stats64(stats, &dev->stats);
spin_unlock_bh(&priv->stats_lock);
- return &priv->ret_stats;
+ return stats;
}
static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv)
if (mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 1))
en_dbg(HW, priv, "Failed dumping statistics\n");
- memset(&priv->stats, 0, sizeof(priv->stats));
memset(&priv->pstats, 0, sizeof(priv->pstats));
memset(&priv->pkstats, 0, sizeof(priv->pkstats));
memset(&priv->port_stats, 0, sizeof(priv->port_stats));
priv->tx_ring[i]->bytes = 0;
priv->tx_ring[i]->packets = 0;
priv->tx_ring[i]->tx_csum = 0;
+ priv->tx_ring[i]->tx_dropped = 0;
+ priv->tx_ring[i]->queue_stopped = 0;
+ priv->tx_ring[i]->wake_queue = 0;
+ priv->tx_ring[i]->tso_packets = 0;
+ priv->tx_ring[i]->xmit_more = 0;
}
for (i = 0; i < priv->rx_ring_num; i++) {
priv->rx_ring[i]->bytes = 0;
.ndo_stop = mlx4_en_close,
.ndo_start_xmit = mlx4_en_xmit,
.ndo_select_queue = mlx4_en_select_queue,
- .ndo_get_stats = mlx4_en_get_stats,
+ .ndo_get_stats64 = mlx4_en_get_stats64,
.ndo_set_rx_mode = mlx4_en_set_rx_mode,
.ndo_set_mac_address = mlx4_en_set_mac,
.ndo_validate_addr = eth_validate_addr,
.ndo_stop = mlx4_en_close,
.ndo_start_xmit = mlx4_en_xmit,
.ndo_select_queue = mlx4_en_select_queue,
- .ndo_get_stats = mlx4_en_get_stats,
+ .ndo_get_stats64 = mlx4_en_get_stats64,
.ndo_set_rx_mode = mlx4_en_set_rx_mode,
.ndo_set_mac_address = mlx4_en_set_mac,
.ndo_validate_addr = eth_validate_addr,
struct mlx4_counter tmp_counter_stats;
struct mlx4_en_stat_out_mbox *mlx4_en_stats;
struct mlx4_en_stat_out_flow_control_mbox *flowstats;
- struct mlx4_en_priv *priv = netdev_priv(mdev->pndev[port]);
- struct net_device_stats *stats = &priv->stats;
+ struct net_device *dev = mdev->pndev[port];
+ struct mlx4_en_priv *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &dev->stats;
struct mlx4_cmd_mailbox *mailbox;
u64 in_mod = reset << 8 | port;
int err;
}
stats->tx_packets = 0;
stats->tx_bytes = 0;
+ stats->tx_dropped = 0;
priv->port_stats.tx_chksum_offload = 0;
priv->port_stats.queue_stopped = 0;
priv->port_stats.wake_queue = 0;
stats->tx_packets += ring->packets;
stats->tx_bytes += ring->bytes;
+ stats->tx_dropped += ring->tx_dropped;
priv->port_stats.tx_chksum_offload += ring->tx_csum;
priv->port_stats.queue_stopped += ring->queue_stopped;
priv->port_stats.wake_queue += ring->wake_queue;
stats->multicast = en_stats_adder(&mlx4_en_stats->MCAST_prio_0,
&mlx4_en_stats->MCAST_prio_1,
NUM_PRIORITIES);
- stats->collisions = 0;
stats->rx_dropped = be32_to_cpu(mlx4_en_stats->RDROP) +
sw_rx_dropped;
stats->rx_length_errors = be32_to_cpu(mlx4_en_stats->RdropLength);
- stats->rx_over_errors = 0;
stats->rx_crc_errors = be32_to_cpu(mlx4_en_stats->RCRC);
- stats->rx_frame_errors = 0;
stats->rx_fifo_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw);
- stats->rx_missed_errors = 0;
- stats->tx_aborted_errors = 0;
- stats->tx_carrier_errors = 0;
- stats->tx_fifo_errors = 0;
- stats->tx_heartbeat_errors = 0;
- stats->tx_window_errors = 0;
- stats->tx_dropped = be32_to_cpu(mlx4_en_stats->TDROP);
+ stats->tx_dropped += be32_to_cpu(mlx4_en_stats->TDROP);
/* RX stats */
priv->pkstats.rx_multicast_packets = stats->multicast;
bool inline_ok;
u32 ring_cons;
- if (!priv->port_up)
- goto tx_drop;
-
tx_ind = skb_get_queue_mapping(skb);
ring = priv->tx_ring[tx_ind];
+ if (!priv->port_up)
+ goto tx_drop;
+
/* fetch ring->cons far ahead before needing it to avoid stall */
ring_cons = ACCESS_ONCE(ring->cons);
tx_drop:
dev_kfree_skb_any(skb);
- priv->stats.tx_dropped++;
+ ring->tx_dropped++;
return NETDEV_TX_OK;
}
unsigned long tx_csum;
unsigned long tso_packets;
unsigned long xmit_more;
+ unsigned int tx_dropped;
struct mlx4_bf bf;
unsigned long queue_stopped;
struct mlx4_en_port_profile *prof;
struct net_device *dev;
unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
- struct net_device_stats stats;
- struct net_device_stats ret_stats;
struct mlx4_en_port_state port_state;
spinlock_t stats_lock;
struct ethtool_flow_id ethtool_rules[MAX_NUM_OF_FS_RULES];
flush_workqueue(priv->wq);
if (test_bit(MLX5_INTERFACE_STATE_SHUTDOWN, &mdev->intf_state)) {
netif_device_detach(netdev);
- mutex_lock(&priv->state_lock);
- if (test_bit(MLX5E_STATE_OPENED, &priv->state))
- mlx5e_close_locked(netdev);
- mutex_unlock(&priv->state_lock);
+ mlx5e_close(netdev);
} else {
unregister_netdev(netdev);
}
while ((sq->pc & wq->sz_m1) > sq->edge)
mlx5e_send_nop(sq, false);
- sq->bf_budget = bf ? sq->bf_budget - 1 : 0;
+ if (bf)
+ sq->bf_budget--;
sq->stats.packets++;
sq->stats.bytes += num_bytes;
match_v,
MLX5_FLOW_CONTEXT_ACTION_FWD_DEST,
0, &dest);
- if (IS_ERR_OR_NULL(flow_rule)) {
+ if (IS_ERR(flow_rule)) {
pr_warn(
"FDB: Failed to add flow rule: dmac_v(%pM) dmac_c(%pM) -> vport(%d), err(%ld)\n",
dmac_v, dmac_c, vport, PTR_ERR(flow_rule));
table_size = BIT(MLX5_CAP_ESW_FLOWTABLE_FDB(dev, log_max_ft_size));
fdb = mlx5_create_flow_table(root_ns, 0, table_size, 0);
- if (IS_ERR_OR_NULL(fdb)) {
+ if (IS_ERR(fdb)) {
err = PTR_ERR(fdb);
esw_warn(dev, "Failed to create FDB Table err %d\n", err);
goto out;
MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, table_size - 3);
eth_broadcast_addr(dmac);
g = mlx5_create_flow_group(fdb, flow_group_in);
- if (IS_ERR_OR_NULL(g)) {
+ if (IS_ERR(g)) {
err = PTR_ERR(g);
esw_warn(dev, "Failed to create flow group err(%d)\n", err);
goto out;
eth_zero_addr(dmac);
dmac[0] = 0x01;
g = mlx5_create_flow_group(fdb, flow_group_in);
- if (IS_ERR_OR_NULL(g)) {
+ if (IS_ERR(g)) {
err = PTR_ERR(g);
esw_warn(dev, "Failed to create allmulti flow group err(%d)\n", err);
goto out;
MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, table_size - 1);
MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, table_size - 1);
g = mlx5_create_flow_group(fdb, flow_group_in);
- if (IS_ERR_OR_NULL(g)) {
+ if (IS_ERR(g)) {
err = PTR_ERR(g);
esw_warn(dev, "Failed to create promisc flow group err(%d)\n", err);
goto out;
}
}
- kfree(flow_group_in);
+ kvfree(flow_group_in);
return err;
}
esw_fdb_set_vport_rule(esw,
mac,
vport_idx);
+ iter_vaddr->mc_promisc = true;
break;
case MLX5_ACTION_DEL:
if (!iter_vaddr)
return;
acl = mlx5_create_vport_flow_table(root_ns, 0, table_size, 0, vport->vport);
- if (IS_ERR_OR_NULL(acl)) {
+ if (IS_ERR(acl)) {
err = PTR_ERR(acl);
esw_warn(dev, "Failed to create E-Switch vport[%d] egress flow Table, err(%d)\n",
vport->vport, err);
MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 0);
vlan_grp = mlx5_create_flow_group(acl, flow_group_in);
- if (IS_ERR_OR_NULL(vlan_grp)) {
+ if (IS_ERR(vlan_grp)) {
err = PTR_ERR(vlan_grp);
esw_warn(dev, "Failed to create E-Switch vport[%d] egress allowed vlans flow group, err(%d)\n",
vport->vport, err);
MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, 1);
MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 1);
drop_grp = mlx5_create_flow_group(acl, flow_group_in);
- if (IS_ERR_OR_NULL(drop_grp)) {
+ if (IS_ERR(drop_grp)) {
err = PTR_ERR(drop_grp);
esw_warn(dev, "Failed to create E-Switch vport[%d] egress drop flow group, err(%d)\n",
vport->vport, err);
vport->egress.drop_grp = drop_grp;
vport->egress.allowed_vlans_grp = vlan_grp;
out:
- kfree(flow_group_in);
+ kvfree(flow_group_in);
if (err && !IS_ERR_OR_NULL(vlan_grp))
mlx5_destroy_flow_group(vlan_grp);
if (err && !IS_ERR_OR_NULL(acl))
return;
acl = mlx5_create_vport_flow_table(root_ns, 0, table_size, 0, vport->vport);
- if (IS_ERR_OR_NULL(acl)) {
+ if (IS_ERR(acl)) {
err = PTR_ERR(acl);
esw_warn(dev, "Failed to create E-Switch vport[%d] ingress flow Table, err(%d)\n",
vport->vport, err);
MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 0);
g = mlx5_create_flow_group(acl, flow_group_in);
- if (IS_ERR_OR_NULL(g)) {
+ if (IS_ERR(g)) {
err = PTR_ERR(g);
esw_warn(dev, "Failed to create E-Switch vport[%d] ingress untagged spoofchk flow group, err(%d)\n",
vport->vport, err);
MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 1);
g = mlx5_create_flow_group(acl, flow_group_in);
- if (IS_ERR_OR_NULL(g)) {
+ if (IS_ERR(g)) {
err = PTR_ERR(g);
esw_warn(dev, "Failed to create E-Switch vport[%d] ingress untagged flow group, err(%d)\n",
vport->vport, err);
MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 2);
g = mlx5_create_flow_group(acl, flow_group_in);
- if (IS_ERR_OR_NULL(g)) {
+ if (IS_ERR(g)) {
err = PTR_ERR(g);
esw_warn(dev, "Failed to create E-Switch vport[%d] ingress spoofchk flow group, err(%d)\n",
vport->vport, err);
MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index, 3);
g = mlx5_create_flow_group(acl, flow_group_in);
- if (IS_ERR_OR_NULL(g)) {
+ if (IS_ERR(g)) {
err = PTR_ERR(g);
esw_warn(dev, "Failed to create E-Switch vport[%d] ingress drop flow group, err(%d)\n",
vport->vport, err);
mlx5_destroy_flow_table(vport->ingress.acl);
}
- kfree(flow_group_in);
+ kvfree(flow_group_in);
}
static void esw_vport_cleanup_ingress_rules(struct mlx5_eswitch *esw,
match_v,
MLX5_FLOW_CONTEXT_ACTION_ALLOW,
0, NULL);
- if (IS_ERR_OR_NULL(vport->ingress.allow_rule)) {
+ if (IS_ERR(vport->ingress.allow_rule)) {
err = PTR_ERR(vport->ingress.allow_rule);
pr_warn("vport[%d] configure ingress allow rule, err(%d)\n",
vport->vport, err);
match_v,
MLX5_FLOW_CONTEXT_ACTION_DROP,
0, NULL);
- if (IS_ERR_OR_NULL(vport->ingress.drop_rule)) {
+ if (IS_ERR(vport->ingress.drop_rule)) {
err = PTR_ERR(vport->ingress.drop_rule);
pr_warn("vport[%d] configure ingress drop rule, err(%d)\n",
vport->vport, err);
match_v,
MLX5_FLOW_CONTEXT_ACTION_ALLOW,
0, NULL);
- if (IS_ERR_OR_NULL(vport->egress.allowed_vlan)) {
+ if (IS_ERR(vport->egress.allowed_vlan)) {
err = PTR_ERR(vport->egress.allowed_vlan);
pr_warn("vport[%d] configure egress allowed vlan rule failed, err(%d)\n",
vport->vport, err);
match_v,
MLX5_FLOW_CONTEXT_ACTION_DROP,
0, NULL);
- if (IS_ERR_OR_NULL(vport->egress.drop_rule)) {
+ if (IS_ERR(vport->egress.drop_rule)) {
err = PTR_ERR(vport->egress.drop_rule);
pr_warn("vport[%d] configure egress drop rule failed, err(%d)\n",
vport->vport, err);
/* Sync with current vport context */
vport->enabled_events = enable_events;
- esw_vport_change_handle_locked(vport);
-
vport->enabled = true;
/* only PF is trusted by default */
vport->trusted = (vport_num) ? false : true;
-
- arm_vport_context_events_cmd(esw->dev, vport_num, enable_events);
+ esw_vport_change_handle_locked(vport);
esw->enabled_vports++;
esw_debug(esw->dev, "Enabled VPORT(%d)\n", vport_num);
(esw && MLX5_CAP_GEN(esw->dev, vport_group_manager) && mlx5_core_is_pf(esw->dev))
#define LEGAL_VPORT(esw, vport) (vport >= 0 && vport < esw->total_vports)
+static void node_guid_gen_from_mac(u64 *node_guid, u8 mac[ETH_ALEN])
+{
+ ((u8 *)node_guid)[7] = mac[0];
+ ((u8 *)node_guid)[6] = mac[1];
+ ((u8 *)node_guid)[5] = mac[2];
+ ((u8 *)node_guid)[4] = 0xff;
+ ((u8 *)node_guid)[3] = 0xfe;
+ ((u8 *)node_guid)[2] = mac[3];
+ ((u8 *)node_guid)[1] = mac[4];
+ ((u8 *)node_guid)[0] = mac[5];
+}
+
int mlx5_eswitch_set_vport_mac(struct mlx5_eswitch *esw,
int vport, u8 mac[ETH_ALEN])
{
- int err = 0;
struct mlx5_vport *evport;
+ u64 node_guid;
+ int err = 0;
if (!ESW_ALLOWED(esw))
return -EPERM;
return err;
}
+ node_guid_gen_from_mac(&node_guid, mac);
+ err = mlx5_modify_nic_vport_node_guid(esw->dev, vport, node_guid);
+ if (err)
+ mlx5_core_warn(esw->dev,
+ "Failed to set vport %d node guid, err = %d. RDMA_CM will not function properly for this VF.\n",
+ vport, err);
+
mutex_lock(&esw->state_lock);
if (evport->enabled)
err = esw_vport_ingress_config(esw, evport);
mutex_unlock(&esw->state_lock);
-
return err;
}
ft->id);
return err;
}
- root->root_ft = new_root_ft;
}
+ root->root_ft = new_root_ft;
return 0;
}
void mlx5_cleanup_fs(struct mlx5_core_dev *dev)
{
+ if (MLX5_CAP_GEN(dev, port_type) != MLX5_CAP_PORT_TYPE_ETH)
+ return;
+
cleanup_root_ns(dev);
cleanup_single_prio_root_ns(dev, dev->priv.fdb_root_ns);
cleanup_single_prio_root_ns(dev, dev->priv.esw_egress_root_ns);
{
int err = 0;
+ if (MLX5_CAP_GEN(dev, port_type) != MLX5_CAP_PORT_TYPE_ETH)
+ return 0;
+
err = mlx5_init_fc_stats(dev);
if (err)
return err;
- if (MLX5_CAP_GEN(dev, nic_flow_table)) {
+ if (MLX5_CAP_GEN(dev, nic_flow_table) &&
+ MLX5_CAP_FLOWTABLE_NIC_RX(dev, ft_support)) {
err = init_root_ns(dev);
if (err)
goto err;
}
+
if (MLX5_CAP_GEN(dev, eswitch_flow_table)) {
- err = init_fdb_root_ns(dev);
- if (err)
- goto err;
- }
- if (MLX5_CAP_ESW_EGRESS_ACL(dev, ft_support)) {
- err = init_egress_acl_root_ns(dev);
- if (err)
- goto err;
- }
- if (MLX5_CAP_ESW_INGRESS_ACL(dev, ft_support)) {
- err = init_ingress_acl_root_ns(dev);
- if (err)
- goto err;
+ if (MLX5_CAP_ESW_FLOWTABLE_FDB(dev, ft_support)) {
+ err = init_fdb_root_ns(dev);
+ if (err)
+ goto err;
+ }
+ if (MLX5_CAP_ESW_EGRESS_ACL(dev, ft_support)) {
+ err = init_egress_acl_root_ns(dev);
+ if (err)
+ goto err;
+ }
+ if (MLX5_CAP_ESW_INGRESS_ACL(dev, ft_support)) {
+ err = init_ingress_acl_root_ns(dev);
+ if (err)
+ goto err;
+ }
}
return 0;
if (out.hdr.status)
err = mlx5_cmd_status_to_err(&out.hdr);
else
- *xrcdn = be32_to_cpu(out.xrcdn);
+ *xrcdn = be32_to_cpu(out.xrcdn) & 0xffffff;
return err;
}
}
EXPORT_SYMBOL_GPL(mlx5_query_nic_vport_node_guid);
+int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev,
+ u32 vport, u64 node_guid)
+{
+ int inlen = MLX5_ST_SZ_BYTES(modify_nic_vport_context_in);
+ void *nic_vport_context;
+ u8 *guid;
+ void *in;
+ int err;
+
+ if (!vport)
+ return -EINVAL;
+ if (!MLX5_CAP_GEN(mdev, vport_group_manager))
+ return -EACCES;
+ if (!MLX5_CAP_ESW(mdev, nic_vport_node_guid_modify))
+ return -ENOTSUPP;
+
+ in = mlx5_vzalloc(inlen);
+ if (!in)
+ return -ENOMEM;
+
+ MLX5_SET(modify_nic_vport_context_in, in,
+ field_select.node_guid, 1);
+ MLX5_SET(modify_nic_vport_context_in, in, vport_number, vport);
+ MLX5_SET(modify_nic_vport_context_in, in, other_vport, !!vport);
+
+ nic_vport_context = MLX5_ADDR_OF(modify_nic_vport_context_in,
+ in, nic_vport_context);
+ guid = MLX5_ADDR_OF(nic_vport_context, nic_vport_context,
+ node_guid);
+ MLX5_SET64(nic_vport_context, nic_vport_context, node_guid, node_guid);
+
+ err = mlx5_modify_nic_vport_context(mdev, in, inlen);
+
+ kvfree(in);
+
+ return err;
+}
+
int mlx5_query_nic_vport_qkey_viol_cntr(struct mlx5_core_dev *mdev,
u16 *qkey_viol_cntr)
{
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(pmtu), pmtu_pl);
}
-static int mlxsw_sp_port_swid_set(struct mlxsw_sp_port *mlxsw_sp_port, u8 swid)
+static int __mlxsw_sp_port_swid_set(struct mlxsw_sp *mlxsw_sp, u8 local_port,
+ u8 swid)
{
- struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
char pspa_pl[MLXSW_REG_PSPA_LEN];
- mlxsw_reg_pspa_pack(pspa_pl, swid, mlxsw_sp_port->local_port);
+ mlxsw_reg_pspa_pack(pspa_pl, swid, local_port);
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(pspa), pspa_pl);
}
+static int mlxsw_sp_port_swid_set(struct mlxsw_sp_port *mlxsw_sp_port, u8 swid)
+{
+ struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
+
+ return __mlxsw_sp_port_swid_set(mlxsw_sp, mlxsw_sp_port->local_port,
+ swid);
+}
+
static int mlxsw_sp_port_vp_mode_set(struct mlxsw_sp_port *mlxsw_sp_port,
bool enable)
{
return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sspr), sspr_pl);
}
-static int __mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp,
- u8 local_port, u8 *p_module,
- u8 *p_width, u8 *p_lane)
+static int mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp,
+ u8 local_port, u8 *p_module,
+ u8 *p_width, u8 *p_lane)
{
char pmlp_pl[MLXSW_REG_PMLP_LEN];
int err;
return 0;
}
-static int mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp,
- u8 local_port, u8 *p_module,
- u8 *p_width)
-{
- u8 lane;
-
- return __mlxsw_sp_port_module_info_get(mlxsw_sp, local_port, p_module,
- p_width, &lane);
-}
-
static int mlxsw_sp_port_module_map(struct mlxsw_sp *mlxsw_sp, u8 local_port,
u8 module, u8 width, u8 lane)
{
size_t len)
{
struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
- u8 module, width, lane;
+ u8 module = mlxsw_sp_port->mapping.module;
+ u8 width = mlxsw_sp_port->mapping.width;
+ u8 lane = mlxsw_sp_port->mapping.lane;
int err;
- err = __mlxsw_sp_port_module_info_get(mlxsw_sp_port->mlxsw_sp,
- mlxsw_sp_port->local_port,
- &module, &width, &lane);
- if (err) {
- netdev_err(dev, "Failed to retrieve module information\n");
- return err;
- }
-
if (!mlxsw_sp_port->split)
err = snprintf(name, len, "p%d", module + 1);
else
return 0;
}
-static int __mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
- bool split, u8 module, u8 width)
+static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
+ bool split, u8 module, u8 width, u8 lane)
{
struct mlxsw_sp_port *mlxsw_sp_port;
struct net_device *dev;
mlxsw_sp_port->mlxsw_sp = mlxsw_sp;
mlxsw_sp_port->local_port = local_port;
mlxsw_sp_port->split = split;
+ mlxsw_sp_port->mapping.module = module;
+ mlxsw_sp_port->mapping.width = width;
+ mlxsw_sp_port->mapping.lane = lane;
bytes = DIV_ROUND_UP(VLAN_N_VID, BITS_PER_BYTE);
mlxsw_sp_port->active_vlans = kzalloc(bytes, GFP_KERNEL);
if (!mlxsw_sp_port->active_vlans) {
return err;
}
-static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
- bool split, u8 module, u8 width, u8 lane)
-{
- int err;
-
- err = mlxsw_sp_port_module_map(mlxsw_sp, local_port, module, width,
- lane);
- if (err)
- return err;
-
- err = __mlxsw_sp_port_create(mlxsw_sp, local_port, split, module,
- width);
- if (err)
- goto err_port_create;
-
- return 0;
-
-err_port_create:
- mlxsw_sp_port_module_unmap(mlxsw_sp, local_port);
- return err;
-}
-
static void mlxsw_sp_port_vports_fini(struct mlxsw_sp_port *mlxsw_sp_port)
{
struct net_device *dev = mlxsw_sp_port->dev;
static int mlxsw_sp_ports_create(struct mlxsw_sp *mlxsw_sp)
{
+ u8 module, width, lane;
size_t alloc_size;
- u8 module, width;
int i;
int err;
for (i = 1; i < MLXSW_PORT_MAX_PORTS; i++) {
err = mlxsw_sp_port_module_info_get(mlxsw_sp, i, &module,
- &width);
+ &width, &lane);
if (err)
goto err_port_module_info_get;
if (!width)
continue;
mlxsw_sp->port_to_module[i] = module;
- err = __mlxsw_sp_port_create(mlxsw_sp, i, false, module, width);
+ err = mlxsw_sp_port_create(mlxsw_sp, i, false, module, width,
+ lane);
if (err)
goto err_port_create;
}
return local_port - offset;
}
+static int mlxsw_sp_port_split_create(struct mlxsw_sp *mlxsw_sp, u8 base_port,
+ u8 module, unsigned int count)
+{
+ u8 width = MLXSW_PORT_MODULE_MAX_WIDTH / count;
+ int err, i;
+
+ for (i = 0; i < count; i++) {
+ err = mlxsw_sp_port_module_map(mlxsw_sp, base_port + i, module,
+ width, i * width);
+ if (err)
+ goto err_port_module_map;
+ }
+
+ for (i = 0; i < count; i++) {
+ err = __mlxsw_sp_port_swid_set(mlxsw_sp, base_port + i, 0);
+ if (err)
+ goto err_port_swid_set;
+ }
+
+ for (i = 0; i < count; i++) {
+ err = mlxsw_sp_port_create(mlxsw_sp, base_port + i, true,
+ module, width, i * width);
+ if (err)
+ goto err_port_create;
+ }
+
+ return 0;
+
+err_port_create:
+ for (i--; i >= 0; i--)
+ mlxsw_sp_port_remove(mlxsw_sp, base_port + i);
+ i = count;
+err_port_swid_set:
+ for (i--; i >= 0; i--)
+ __mlxsw_sp_port_swid_set(mlxsw_sp, base_port + i,
+ MLXSW_PORT_SWID_DISABLED_PORT);
+ i = count;
+err_port_module_map:
+ for (i--; i >= 0; i--)
+ mlxsw_sp_port_module_unmap(mlxsw_sp, base_port + i);
+ return err;
+}
+
+static void mlxsw_sp_port_unsplit_create(struct mlxsw_sp *mlxsw_sp,
+ u8 base_port, unsigned int count)
+{
+ u8 local_port, module, width = MLXSW_PORT_MODULE_MAX_WIDTH;
+ int i;
+
+ /* Split by four means we need to re-create two ports, otherwise
+ * only one.
+ */
+ count = count / 2;
+
+ for (i = 0; i < count; i++) {
+ local_port = base_port + i * 2;
+ module = mlxsw_sp->port_to_module[local_port];
+
+ mlxsw_sp_port_module_map(mlxsw_sp, local_port, module, width,
+ 0);
+ }
+
+ for (i = 0; i < count; i++)
+ __mlxsw_sp_port_swid_set(mlxsw_sp, base_port + i * 2, 0);
+
+ for (i = 0; i < count; i++) {
+ local_port = base_port + i * 2;
+ module = mlxsw_sp->port_to_module[local_port];
+
+ mlxsw_sp_port_create(mlxsw_sp, local_port, false, module,
+ width, 0);
+ }
+}
+
static int mlxsw_sp_port_split(struct mlxsw_core *mlxsw_core, u8 local_port,
unsigned int count)
{
struct mlxsw_sp *mlxsw_sp = mlxsw_core_driver_priv(mlxsw_core);
struct mlxsw_sp_port *mlxsw_sp_port;
- u8 width = MLXSW_PORT_MODULE_MAX_WIDTH / count;
u8 module, cur_width, base_port;
int i;
int err;
return -EINVAL;
}
+ module = mlxsw_sp_port->mapping.module;
+ cur_width = mlxsw_sp_port->mapping.width;
+
if (count != 2 && count != 4) {
netdev_err(mlxsw_sp_port->dev, "Port can only be split into 2 or 4 ports\n");
return -EINVAL;
}
- err = mlxsw_sp_port_module_info_get(mlxsw_sp, local_port, &module,
- &cur_width);
- if (err) {
- netdev_err(mlxsw_sp_port->dev, "Failed to get port's width\n");
- return err;
- }
-
if (cur_width != MLXSW_PORT_MODULE_MAX_WIDTH) {
netdev_err(mlxsw_sp_port->dev, "Port cannot be split further\n");
return -EINVAL;
for (i = 0; i < count; i++)
mlxsw_sp_port_remove(mlxsw_sp, base_port + i);
- for (i = 0; i < count; i++) {
- err = mlxsw_sp_port_create(mlxsw_sp, base_port + i, true,
- module, width, i * width);
- if (err) {
- dev_err(mlxsw_sp->bus_info->dev, "Failed to create split port\n");
- goto err_port_create;
- }
+ err = mlxsw_sp_port_split_create(mlxsw_sp, base_port, module, count);
+ if (err) {
+ dev_err(mlxsw_sp->bus_info->dev, "Failed to create split ports\n");
+ goto err_port_split_create;
}
return 0;
-err_port_create:
- for (i--; i >= 0; i--)
- mlxsw_sp_port_remove(mlxsw_sp, base_port + i);
- for (i = 0; i < count / 2; i++) {
- module = mlxsw_sp->port_to_module[base_port + i * 2];
- mlxsw_sp_port_create(mlxsw_sp, base_port + i * 2, false,
- module, MLXSW_PORT_MODULE_MAX_WIDTH, 0);
- }
+err_port_split_create:
+ mlxsw_sp_port_unsplit_create(mlxsw_sp, base_port, count);
return err;
}
{
struct mlxsw_sp *mlxsw_sp = mlxsw_core_driver_priv(mlxsw_core);
struct mlxsw_sp_port *mlxsw_sp_port;
- u8 module, cur_width, base_port;
+ u8 cur_width, base_port;
unsigned int count;
int i;
- int err;
mlxsw_sp_port = mlxsw_sp->ports[local_port];
if (!mlxsw_sp_port) {
return -EINVAL;
}
- err = mlxsw_sp_port_module_info_get(mlxsw_sp, local_port, &module,
- &cur_width);
- if (err) {
- netdev_err(mlxsw_sp_port->dev, "Failed to get port's width\n");
- return err;
- }
+ cur_width = mlxsw_sp_port->mapping.width;
count = cur_width == 1 ? 4 : 2;
base_port = mlxsw_sp_cluster_base_port_get(local_port);
for (i = 0; i < count; i++)
mlxsw_sp_port_remove(mlxsw_sp, base_port + i);
- for (i = 0; i < count / 2; i++) {
- module = mlxsw_sp->port_to_module[base_port + i * 2];
- err = mlxsw_sp_port_create(mlxsw_sp, base_port + i * 2, false,
- module, MLXSW_PORT_MODULE_MAX_WIDTH,
- 0);
- if (err)
- dev_err(mlxsw_sp->bus_info->dev, "Failed to reinstantiate port\n");
- }
+ mlxsw_sp_port_unsplit_create(mlxsw_sp, base_port, count);
return 0;
}
struct ieee_maxrate *maxrate;
struct ieee_pfc *pfc;
} dcb;
+ struct {
+ u8 module;
+ u8 width;
+ u8 lane;
+ } mapping;
/* 802.1Q bridge VLANs */
unsigned long *active_vlans;
unsigned long *untagged_vlans;
struct dcbx_app_priority_entry *p_tbl,
u32 pri_tc_tbl, int count, bool dcbx_enabled)
{
- u8 tc, priority, priority_map;
+ u8 tc, priority_map;
enum dcbx_protocol_type type;
u16 protocol_id;
+ int priority;
bool enable;
int i;
* indication, but we only got here if there was an
* app tlv for the protocol, so dcbx must be enabled.
*/
- enable = !!(type == DCBX_PROTOCOL_ETH);
+ enable = !(type == DCBX_PROTOCOL_ETH);
qed_dcbx_update_app_info(p_data, p_hwfn, enable, true,
priority, tc, type);
}
}
-static int qed_init_qm_info(struct qed_hwfn *p_hwfn)
+static int qed_init_qm_info(struct qed_hwfn *p_hwfn, bool b_sleepable)
{
u8 num_vports, vf_offset = 0, i, vport_id, num_ports, curr_queue = 0;
struct qed_qm_info *qm_info = &p_hwfn->qm_info;
struct init_qm_port_params *p_qm_port;
u16 num_pqs, multi_cos_tcs = 1;
+ u8 pf_wfq = qm_info->pf_wfq;
+ u32 pf_rl = qm_info->pf_rl;
u16 num_vfs = 0;
#ifdef CONFIG_QED_SRIOV
/* PQs will be arranged as follows: First per-TC PQ then pure-LB quete.
*/
- qm_info->qm_pq_params = kzalloc(sizeof(*qm_info->qm_pq_params) *
- num_pqs, GFP_KERNEL);
+ qm_info->qm_pq_params = kcalloc(num_pqs,
+ sizeof(struct init_qm_pq_params),
+ b_sleepable ? GFP_KERNEL : GFP_ATOMIC);
if (!qm_info->qm_pq_params)
goto alloc_err;
- qm_info->qm_vport_params = kzalloc(sizeof(*qm_info->qm_vport_params) *
- num_vports, GFP_KERNEL);
+ qm_info->qm_vport_params = kcalloc(num_vports,
+ sizeof(struct init_qm_vport_params),
+ b_sleepable ? GFP_KERNEL
+ : GFP_ATOMIC);
if (!qm_info->qm_vport_params)
goto alloc_err;
- qm_info->qm_port_params = kzalloc(sizeof(*qm_info->qm_port_params) *
- MAX_NUM_PORTS, GFP_KERNEL);
+ qm_info->qm_port_params = kcalloc(MAX_NUM_PORTS,
+ sizeof(struct init_qm_port_params),
+ b_sleepable ? GFP_KERNEL
+ : GFP_ATOMIC);
if (!qm_info->qm_port_params)
goto alloc_err;
- qm_info->wfq_data = kcalloc(num_vports, sizeof(*qm_info->wfq_data),
- GFP_KERNEL);
+ qm_info->wfq_data = kcalloc(num_vports, sizeof(struct qed_wfq_data),
+ b_sleepable ? GFP_KERNEL : GFP_ATOMIC);
if (!qm_info->wfq_data)
goto alloc_err;
for (i = 0; i < qm_info->num_vports; i++)
qm_info->qm_vport_params[i].vport_wfq = 1;
- qm_info->pf_wfq = 0;
- qm_info->pf_rl = 0;
qm_info->vport_rl_en = 1;
qm_info->vport_wfq_en = 1;
+ qm_info->pf_rl = pf_rl;
+ qm_info->pf_wfq = pf_wfq;
return 0;
qed_qm_info_free(p_hwfn);
/* initialize qed's qm data structure */
- rc = qed_init_qm_info(p_hwfn);
+ rc = qed_init_qm_info(p_hwfn, false);
if (rc)
return rc;
goto alloc_err;
/* Prepare and process QM requirements */
- rc = qed_init_qm_info(p_hwfn);
+ rc = qed_init_qm_info(p_hwfn, true);
if (rc)
goto alloc_err;
hw_mode |= 1 << MODE_ASIC;
+ if (p_hwfn->cdev->num_hwfns > 1)
+ hw_mode |= 1 << MODE_100G;
+
p_hwfn->hw_info.hw_mode = hw_mode;
+
+ DP_VERBOSE(p_hwfn, (NETIF_MSG_PROBE | NETIF_MSG_IFUP),
+ "Configuring function for hw_mode: 0x%08x\n",
+ p_hwfn->hw_info.hw_mode);
}
/* Init run time data for all PFs on an engine. */
u32 load_code, param;
int rc, mfw_rc, i;
+ if ((int_mode == QED_INT_MODE_MSI) && (cdev->num_hwfns > 1)) {
+ DP_NOTICE(cdev, "MSI mode is not supported for CMT devices\n");
+ return -EINVAL;
+ }
+
if (IS_PF(cdev)) {
rc = qed_init_fw_data(cdev, bin_fw_data);
if (rc != 0)
{
int i;
+ if (cdev->num_hwfns > 1) {
+ DP_VERBOSE(cdev,
+ NETIF_MSG_LINK,
+ "WFQ configuration is not supported for this device\n");
+ return;
+ }
+
for_each_hwfn(cdev, i) {
struct qed_hwfn *p_hwfn = &cdev->hwfns[i];
/* Fallthrough */
case QED_INT_MODE_MSI:
- rc = pci_enable_msi(cdev->pdev);
- if (!rc) {
- int_params->out.int_mode = QED_INT_MODE_MSI;
- goto out;
- }
+ if (cdev->num_hwfns == 1) {
+ rc = pci_enable_msi(cdev->pdev);
+ if (!rc) {
+ int_params->out.int_mode = QED_INT_MODE_MSI;
+ goto out;
+ }
- DP_NOTICE(cdev, "Failed to enable MSI\n");
- if (force_mode)
- goto out;
+ DP_NOTICE(cdev, "Failed to enable MSI\n");
+ if (force_mode)
+ goto out;
+ }
/* Fallthrough */
case QED_INT_MODE_INTA:
return port_type;
}
+static int qed_get_link_data(struct qed_hwfn *hwfn,
+ struct qed_mcp_link_params *params,
+ struct qed_mcp_link_state *link,
+ struct qed_mcp_link_capabilities *link_caps)
+{
+ void *p;
+
+ if (!IS_PF(hwfn->cdev)) {
+ qed_vf_get_link_params(hwfn, params);
+ qed_vf_get_link_state(hwfn, link);
+ qed_vf_get_link_caps(hwfn, link_caps);
+
+ return 0;
+ }
+
+ p = qed_mcp_get_link_params(hwfn);
+ if (!p)
+ return -ENXIO;
+ memcpy(params, p, sizeof(*params));
+
+ p = qed_mcp_get_link_state(hwfn);
+ if (!p)
+ return -ENXIO;
+ memcpy(link, p, sizeof(*link));
+
+ p = qed_mcp_get_link_capabilities(hwfn);
+ if (!p)
+ return -ENXIO;
+ memcpy(link_caps, p, sizeof(*link_caps));
+
+ return 0;
+}
+
static void qed_fill_link(struct qed_hwfn *hwfn,
struct qed_link_output *if_link)
{
memset(if_link, 0, sizeof(*if_link));
/* Prepare source inputs */
- if (IS_PF(hwfn->cdev)) {
- memcpy(¶ms, qed_mcp_get_link_params(hwfn), sizeof(params));
- memcpy(&link, qed_mcp_get_link_state(hwfn), sizeof(link));
- memcpy(&link_caps, qed_mcp_get_link_capabilities(hwfn),
- sizeof(link_caps));
- } else {
- qed_vf_get_link_params(hwfn, ¶ms);
- qed_vf_get_link_state(hwfn, &link);
- qed_vf_get_link_caps(hwfn, &link_caps);
+ if (qed_get_link_data(hwfn, ¶ms, &link, &link_caps)) {
+ dev_warn(&hwfn->cdev->pdev->dev, "no link data available\n");
+ return;
}
/* Set the link parameters to pass to protocol driver */
#include "qed_vf.h"
#define QED_VF_ARRAY_LENGTH (3)
+#ifdef CONFIG_QED_SRIOV
#define IS_VF(cdev) ((cdev)->b_is_vf)
#define IS_PF(cdev) (!((cdev)->b_is_vf))
-#ifdef CONFIG_QED_SRIOV
#define IS_PF_SRIOV(p_hwfn) (!!((p_hwfn)->cdev->p_iov_info))
#else
+#define IS_VF(cdev) (0)
+#define IS_PF(cdev) (1)
#define IS_PF_SRIOV(p_hwfn) (0)
#endif
#define IS_PF_SRIOV_ALLOC(p_hwfn) (!!((p_hwfn)->pf_iov_info))
case ETH_SS_PRIV_FLAGS:
return QEDE_PRI_FLAG_LEN;
case ETH_SS_TEST:
- return QEDE_ETHTOOL_TEST_MAX;
+ if (!IS_VF(edev))
+ return QEDE_ETHTOOL_TEST_MAX;
+ else
+ return 0;
default:
DP_VERBOSE(edev, QED_MSG_DEBUG,
"Unsupported stringset 0x%08x\n", stringset);
{PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_100), QEDE_PRIVATE_PF},
{PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_50), QEDE_PRIVATE_PF},
{PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_25), QEDE_PRIVATE_PF},
+#ifdef CONFIG_QED_SRIOV
{PCI_VDEVICE(QLOGIC, PCI_DEVICE_ID_57980S_IOV), QEDE_PRIVATE_VF},
+#endif
{ 0 }
};
{
struct qede_dev *edev = netdev_priv(dev);
- return edev->ops->iov->set_rate(edev->cdev, vfidx, max_tx_rate,
+ return edev->ops->iov->set_rate(edev->cdev, vfidx, min_tx_rate,
max_tx_rate);
}
edev->accept_any_vlan = false;
}
+int qede_set_features(struct net_device *dev, netdev_features_t features)
+{
+ struct qede_dev *edev = netdev_priv(dev);
+ netdev_features_t changes = features ^ dev->features;
+ bool need_reload = false;
+
+ /* No action needed if hardware GRO is disabled during driver load */
+ if (changes & NETIF_F_GRO) {
+ if (dev->features & NETIF_F_GRO)
+ need_reload = !edev->gro_disable;
+ else
+ need_reload = edev->gro_disable;
+ }
+
+ if (need_reload && netif_running(edev->ndev)) {
+ dev->features = features;
+ qede_reload(edev, NULL, NULL);
+ return 1;
+ }
+
+ return 0;
+}
+
#ifdef CONFIG_QEDE_VXLAN
static void qede_add_vxlan_port(struct net_device *dev,
sa_family_t sa_family, __be16 port)
#endif
.ndo_vlan_rx_add_vid = qede_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = qede_vlan_rx_kill_vid,
+ .ndo_set_features = qede_set_features,
.ndo_get_stats64 = qede_get_stats64,
#ifdef CONFIG_QED_SRIOV
.ndo_set_vf_link_state = qede_set_vf_link_state,
}
/* Disabling the timer */
- del_timer_sync(&qdev->timer);
ql_cancel_all_work_sync(qdev);
for (i = 0; i < qdev->rss_ring_count; i++)
return PCI_ERS_RESULT_CAN_RECOVER;
case pci_channel_io_frozen:
netif_device_detach(ndev);
+ del_timer_sync(&qdev->timer);
if (netif_running(ndev))
ql_eeh_close(ndev);
pci_disable_device(pdev);
case pci_channel_io_perm_failure:
dev_err(&pdev->dev,
"%s: pci_channel_io_perm_failure.\n", __func__);
+ del_timer_sync(&qdev->timer);
ql_eeh_close(ndev);
set_bit(QL_EEH_FATAL, &qdev->flags);
return PCI_ERS_RESULT_DISCONNECT;
return rc;
}
+static void efx_ef10_forget_old_piobufs(struct efx_nic *efx)
+{
+ struct efx_channel *channel;
+ struct efx_tx_queue *tx_queue;
+
+ /* All our existing PIO buffers went away */
+ efx_for_each_channel(channel, efx)
+ efx_for_each_channel_tx_queue(tx_queue, channel)
+ tx_queue->piobuf = NULL;
+}
+
#else /* !EFX_USE_PIO */
static int efx_ef10_alloc_piobufs(struct efx_nic *efx, unsigned int n)
{
}
+static void efx_ef10_forget_old_piobufs(struct efx_nic *efx)
+{
+}
+
#endif /* EFX_USE_PIO */
static void efx_ef10_remove(struct efx_nic *efx)
nic_data->must_realloc_vis = true;
nic_data->must_restore_filters = true;
nic_data->must_restore_piobufs = true;
+ efx_ef10_forget_old_piobufs(efx);
nic_data->rx_rss_context = EFX_EF10_RSS_CONTEXT_INVALID;
/* Driver-created vswitches and vports must be re-created */
#ifdef CONFIG_RFS_ACCEL
if (efx->type->offload_features & NETIF_F_NTUPLE) {
- efx->rps_flow_id = kcalloc(efx->type->max_rx_ip_filters,
- sizeof(*efx->rps_flow_id),
- GFP_KERNEL);
- if (!efx->rps_flow_id) {
+ struct efx_channel *channel;
+ int i, success = 1;
+
+ efx_for_each_channel(channel, efx) {
+ channel->rps_flow_id =
+ kcalloc(efx->type->max_rx_ip_filters,
+ sizeof(*channel->rps_flow_id),
+ GFP_KERNEL);
+ if (!channel->rps_flow_id)
+ success = 0;
+ else
+ for (i = 0;
+ i < efx->type->max_rx_ip_filters;
+ ++i)
+ channel->rps_flow_id[i] =
+ RPS_FLOW_ID_INVALID;
+ }
+
+ if (!success) {
+ efx_for_each_channel(channel, efx)
+ kfree(channel->rps_flow_id);
efx->type->filter_table_remove(efx);
rc = -ENOMEM;
goto out_unlock;
}
+
+ efx->rps_expire_index = efx->rps_expire_channel = 0;
}
#endif
out_unlock:
static void efx_remove_filters(struct efx_nic *efx)
{
#ifdef CONFIG_RFS_ACCEL
- kfree(efx->rps_flow_id);
+ struct efx_channel *channel;
+
+ efx_for_each_channel(channel, efx)
+ kfree(channel->rps_flow_id);
#endif
down_write(&efx->filter_sem);
efx->type->filter_table_remove(efx);
case MC_CMD_MEDIA_XFP:
case MC_CMD_MEDIA_SFP_PLUS:
- result |= SUPPORTED_FIBRE;
- break;
-
case MC_CMD_MEDIA_QSFP_PLUS:
result |= SUPPORTED_FIBRE;
+ if (cap & (1 << MC_CMD_PHY_CAP_1000FDX_LBN))
+ result |= SUPPORTED_1000baseT_Full;
+ if (cap & (1 << MC_CMD_PHY_CAP_10000FDX_LBN))
+ result |= SUPPORTED_10000baseT_Full;
if (cap & (1 << MC_CMD_PHY_CAP_40000FDX_LBN))
result |= SUPPORTED_40000baseCR4_Full;
break;
* @event_test_cpu: Last CPU to handle interrupt or test event for this channel
* @irq_count: Number of IRQs since last adaptive moderation decision
* @irq_mod_score: IRQ moderation score
+ * @rps_flow_id: Flow IDs of filters allocated for accelerated RFS,
+ * indexed by filter ID
* @n_rx_tobe_disc: Count of RX_TOBE_DISC errors
* @n_rx_ip_hdr_chksum_err: Count of RX IP header checksum errors
* @n_rx_tcp_udp_chksum_err: Count of RX TCP and UDP checksum errors
unsigned int irq_mod_score;
#ifdef CONFIG_RFS_ACCEL
unsigned int rfs_filters_added;
+#define RPS_FLOW_ID_INVALID 0xFFFFFFFF
+ u32 *rps_flow_id;
#endif
unsigned n_rx_tobe_disc;
* @filter_sem: Filter table rw_semaphore, for freeing the table
* @filter_lock: Filter table lock, for mere content changes
* @filter_state: Architecture-dependent filter table state
- * @rps_flow_id: Flow IDs of filters allocated for accelerated RFS,
- * indexed by filter ID
- * @rps_expire_index: Next index to check for expiry in @rps_flow_id
+ * @rps_expire_channel: Next channel to check for expiry
+ * @rps_expire_index: Next index to check for expiry in
+ * @rps_expire_channel's @rps_flow_id
* @active_queues: Count of RX and TX queues that haven't been flushed and drained.
* @rxq_flush_pending: Count of number of receive queues that need to be flushed.
* Decremented when the efx_flush_rx_queue() is called.
spinlock_t filter_lock;
void *filter_state;
#ifdef CONFIG_RFS_ACCEL
- u32 *rps_flow_id;
+ unsigned int rps_expire_channel;
unsigned int rps_expire_index;
#endif
struct efx_nic *efx = netdev_priv(net_dev);
struct efx_channel *channel;
struct efx_filter_spec spec;
- const __be16 *ports;
- __be16 ether_type;
- int nhoff;
+ struct flow_keys fk;
int rc;
- /* The core RPS/RFS code has already parsed and validated
- * VLAN, IP and transport headers. We assume they are in the
- * header area.
- */
-
- if (skb->protocol == htons(ETH_P_8021Q)) {
- const struct vlan_hdr *vh =
- (const struct vlan_hdr *)skb->data;
+ if (flow_id == RPS_FLOW_ID_INVALID)
+ return -EINVAL;
- /* We can't filter on the IP 5-tuple and the vlan
- * together, so just strip the vlan header and filter
- * on the IP part.
- */
- EFX_BUG_ON_PARANOID(skb_headlen(skb) < sizeof(*vh));
- ether_type = vh->h_vlan_encapsulated_proto;
- nhoff = sizeof(struct vlan_hdr);
- } else {
- ether_type = skb->protocol;
- nhoff = 0;
- }
+ if (!skb_flow_dissect_flow_keys(skb, &fk, 0))
+ return -EPROTONOSUPPORT;
- if (ether_type != htons(ETH_P_IP) && ether_type != htons(ETH_P_IPV6))
+ if (fk.basic.n_proto != htons(ETH_P_IP) && fk.basic.n_proto != htons(ETH_P_IPV6))
+ return -EPROTONOSUPPORT;
+ if (fk.control.flags & FLOW_DIS_IS_FRAGMENT)
return -EPROTONOSUPPORT;
efx_filter_init_rx(&spec, EFX_FILTER_PRI_HINT,
EFX_FILTER_MATCH_ETHER_TYPE | EFX_FILTER_MATCH_IP_PROTO |
EFX_FILTER_MATCH_LOC_HOST | EFX_FILTER_MATCH_LOC_PORT |
EFX_FILTER_MATCH_REM_HOST | EFX_FILTER_MATCH_REM_PORT;
- spec.ether_type = ether_type;
-
- if (ether_type == htons(ETH_P_IP)) {
- const struct iphdr *ip =
- (const struct iphdr *)(skb->data + nhoff);
-
- EFX_BUG_ON_PARANOID(skb_headlen(skb) < nhoff + sizeof(*ip));
- if (ip_is_fragment(ip))
- return -EPROTONOSUPPORT;
- spec.ip_proto = ip->protocol;
- spec.rem_host[0] = ip->saddr;
- spec.loc_host[0] = ip->daddr;
- EFX_BUG_ON_PARANOID(skb_headlen(skb) < nhoff + 4 * ip->ihl + 4);
- ports = (const __be16 *)(skb->data + nhoff + 4 * ip->ihl);
+ spec.ether_type = fk.basic.n_proto;
+ spec.ip_proto = fk.basic.ip_proto;
+
+ if (fk.basic.n_proto == htons(ETH_P_IP)) {
+ spec.rem_host[0] = fk.addrs.v4addrs.src;
+ spec.loc_host[0] = fk.addrs.v4addrs.dst;
} else {
- const struct ipv6hdr *ip6 =
- (const struct ipv6hdr *)(skb->data + nhoff);
-
- EFX_BUG_ON_PARANOID(skb_headlen(skb) <
- nhoff + sizeof(*ip6) + 4);
- spec.ip_proto = ip6->nexthdr;
- memcpy(spec.rem_host, &ip6->saddr, sizeof(ip6->saddr));
- memcpy(spec.loc_host, &ip6->daddr, sizeof(ip6->daddr));
- ports = (const __be16 *)(ip6 + 1);
+ memcpy(spec.rem_host, &fk.addrs.v6addrs.src, sizeof(struct in6_addr));
+ memcpy(spec.loc_host, &fk.addrs.v6addrs.dst, sizeof(struct in6_addr));
}
- spec.rem_port = ports[0];
- spec.loc_port = ports[1];
+ spec.rem_port = fk.ports.src;
+ spec.loc_port = fk.ports.dst;
rc = efx->type->filter_rfs_insert(efx, &spec);
if (rc < 0)
return rc;
/* Remember this so we can check whether to expire the filter later */
- efx->rps_flow_id[rc] = flow_id;
- channel = efx_get_channel(efx, skb_get_rx_queue(skb));
+ channel = efx_get_channel(efx, rxq_index);
+ channel->rps_flow_id[rc] = flow_id;
++channel->rfs_filters_added;
- if (ether_type == htons(ETH_P_IP))
+ if (spec.ether_type == htons(ETH_P_IP))
netif_info(efx, rx_status, efx->net_dev,
"steering %s %pI4:%u:%pI4:%u to queue %u [flow %u filter %d]\n",
(spec.ip_proto == IPPROTO_TCP) ? "TCP" : "UDP",
- spec.rem_host, ntohs(ports[0]), spec.loc_host,
- ntohs(ports[1]), rxq_index, flow_id, rc);
+ spec.rem_host, ntohs(spec.rem_port), spec.loc_host,
+ ntohs(spec.loc_port), rxq_index, flow_id, rc);
else
netif_info(efx, rx_status, efx->net_dev,
"steering %s [%pI6]:%u:[%pI6]:%u to queue %u [flow %u filter %d]\n",
(spec.ip_proto == IPPROTO_TCP) ? "TCP" : "UDP",
- spec.rem_host, ntohs(ports[0]), spec.loc_host,
- ntohs(ports[1]), rxq_index, flow_id, rc);
+ spec.rem_host, ntohs(spec.rem_port), spec.loc_host,
+ ntohs(spec.loc_port), rxq_index, flow_id, rc);
return rc;
}
bool __efx_filter_rfs_expire(struct efx_nic *efx, unsigned int quota)
{
bool (*expire_one)(struct efx_nic *efx, u32 flow_id, unsigned int index);
- unsigned int index, size;
+ unsigned int channel_idx, index, size;
u32 flow_id;
if (!spin_trylock_bh(&efx->filter_lock))
return false;
expire_one = efx->type->filter_rfs_expire_one;
+ channel_idx = efx->rps_expire_channel;
index = efx->rps_expire_index;
size = efx->type->max_rx_ip_filters;
while (quota--) {
- flow_id = efx->rps_flow_id[index];
- if (expire_one(efx, flow_id, index))
+ struct efx_channel *channel = efx_get_channel(efx, channel_idx);
+ flow_id = channel->rps_flow_id[index];
+
+ if (flow_id != RPS_FLOW_ID_INVALID &&
+ expire_one(efx, flow_id, index)) {
netif_info(efx, rx_status, efx->net_dev,
- "expired filter %d [flow %u]\n",
- index, flow_id);
- if (++index == size)
+ "expired filter %d [queue %u flow %u]\n",
+ index, channel_idx, flow_id);
+ channel->rps_flow_id[index] = RPS_FLOW_ID_INVALID;
+ }
+ if (++index == size) {
+ if (++channel_idx == efx->n_channels)
+ channel_idx = 0;
index = 0;
+ }
}
+ efx->rps_expire_channel = channel_idx;
efx->rps_expire_index = index;
spin_unlock_bh(&efx->filter_lock);
struct netdev_hw_addr *ha;
netdev_for_each_uc_addr(ha, dev) {
- dwmac4_set_umac_addr(ioaddr, ha->addr, reg);
+ dwmac4_set_umac_addr(hw, ha->addr, reg);
reg++;
}
}
if (!netif_running(ndev))
return 0;
- spin_lock_irqsave(&priv->lock, flags);
-
/* Power Down bit, into the PM register, is cleared
* automatically as soon as a magic packet or a Wake-up frame
* is received. Anyway, it's better to manually clear
* from another devices (e.g. serial console).
*/
if (device_may_wakeup(priv->device)) {
+ spin_lock_irqsave(&priv->lock, flags);
priv->hw->mac->pmt(priv->hw, 0);
+ spin_unlock_irqrestore(&priv->lock, flags);
priv->irq_wake = 0;
} else {
pinctrl_pm_select_default_state(priv->device);
netif_device_attach(ndev);
+ spin_lock_irqsave(&priv->lock, flags);
+
priv->cur_rx = 0;
priv->dirty_rx = 0;
priv->dirty_tx = 0;
return -ENOMEM;
if (mdio_bus_data->irqs)
- memcpy(new_bus->irq, mdio_bus_data, sizeof(new_bus->irq));
+ memcpy(new_bus->irq, mdio_bus_data->irqs, sizeof(new_bus->irq));
#ifdef CONFIG_OF
if (priv->device->of_node)
if (priv->coal_intvl != 0) {
struct ethtool_coalesce coal;
- coal.rx_coalesce_usecs = (priv->coal_intvl << 4);
+ coal.rx_coalesce_usecs = priv->coal_intvl;
cpsw_set_coalesce(ndev, &coal);
}
#define TEAM_ENC_FEATURES (NETIF_F_HW_CSUM | NETIF_F_SG | \
NETIF_F_RXCSUM | NETIF_F_ALL_TSO)
-static void __team_compute_features(struct team *team)
+static void ___team_compute_features(struct team *team)
{
struct team_port *port;
u32 vlan_features = TEAM_VLAN_FEATURES & NETIF_F_ALL_FOR_ALL;
team->dev->priv_flags &= ~IFF_XMIT_DST_RELEASE;
if (dst_release_flag == (IFF_XMIT_DST_RELEASE | IFF_XMIT_DST_RELEASE_PERM))
team->dev->priv_flags |= IFF_XMIT_DST_RELEASE;
+}
+static void __team_compute_features(struct team *team)
+{
+ ___team_compute_features(team);
netdev_change_features(team->dev);
}
static void team_compute_features(struct team *team)
{
mutex_lock(&team->lock);
- __team_compute_features(team);
+ ___team_compute_features(team);
mutex_unlock(&team->lock);
+ netdev_change_features(team->dev);
}
static int team_port_enter(struct team *team, struct team_port *port)
goto goon;
}
- if (!count || count < 4)
+ if (count < 4)
goto goon;
rx_status = buf[count - 2];
#define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \
SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3)
+#define CARRIER_CHECK_DELAY (2 * HZ)
+
struct smsc95xx_priv {
u32 mac_cr;
u32 hash_hi;
spinlock_t mac_cr_lock;
u8 features;
u8 suspend_flags;
+ bool link_ok;
+ struct delayed_work carrier_check;
+ struct usbnet *dev;
};
static bool turbo_mode = true;
intdata);
}
+static void set_carrier(struct usbnet *dev, bool link)
+{
+ struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+
+ if (pdata->link_ok == link)
+ return;
+
+ pdata->link_ok = link;
+
+ if (link)
+ usbnet_link_change(dev, 1, 0);
+ else
+ usbnet_link_change(dev, 0, 0);
+}
+
+static void check_carrier(struct work_struct *work)
+{
+ struct smsc95xx_priv *pdata = container_of(work, struct smsc95xx_priv,
+ carrier_check.work);
+ struct usbnet *dev = pdata->dev;
+ int ret;
+
+ if (pdata->suspend_flags != 0)
+ return;
+
+ ret = smsc95xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMSR);
+ if (ret < 0) {
+ netdev_warn(dev->net, "Failed to read MII_BMSR\n");
+ return;
+ }
+ if (ret & BMSR_LSTATUS)
+ set_carrier(dev, 1);
+ else
+ set_carrier(dev, 0);
+
+ schedule_delayed_work(&pdata->carrier_check, CARRIER_CHECK_DELAY);
+}
+
/* Enable or disable Tx & Rx checksum offload engines */
static int smsc95xx_set_features(struct net_device *netdev,
netdev_features_t features)
dev->net->flags |= IFF_MULTICAST;
dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM;
dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
+
+ pdata->dev = dev;
+ INIT_DELAYED_WORK(&pdata->carrier_check, check_carrier);
+ schedule_delayed_work(&pdata->carrier_check, CARRIER_CHECK_DELAY);
+
return 0;
}
static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf)
{
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
+
if (pdata) {
+ cancel_delayed_work(&pdata->carrier_check);
netif_dbg(dev, ifdown, dev->net, "free pdata\n");
kfree(pdata);
pdata = NULL;
/* do this first to ensure it's cleared even in error case */
pdata->suspend_flags = 0;
+ schedule_delayed_work(&pdata->carrier_check, CARRIER_CHECK_DELAY);
if (suspend_flags & SUSPEND_ALLMODES) {
/* clear wake-up sources */
virtio_device_ready(vdev);
- /* Last of all, set up some receive buffers. */
- for (i = 0; i < vi->curr_queue_pairs; i++) {
- try_fill_recv(vi, &vi->rq[i], GFP_KERNEL);
-
- /* If we didn't even get one input buffer, we're useless. */
- if (vi->rq[i].vq->num_free ==
- virtqueue_get_vring_size(vi->rq[i].vq)) {
- free_unused_bufs(vi);
- err = -ENOMEM;
- goto free_recv_bufs;
- }
- }
-
vi->nb.notifier_call = &virtnet_cpu_callback;
err = register_hotcpu_notifier(&vi->nb);
if (err) {
pr_debug("virtio_net: registering cpu notifier failed\n");
- goto free_recv_bufs;
+ goto free_unregister_netdev;
}
/* Assume link up if device can't report link status,
return 0;
-free_recv_bufs:
+free_unregister_netdev:
vi->vdev->config->reset(vdev);
- free_receive_bufs(vi);
unregister_netdev(dev);
free_vqs:
cancel_delayed_work_sync(&vi->refill);
rcdlro = (struct Vmxnet3_RxCompDescExt *)rcd;
segCnt = rcdlro->segCnt;
- BUG_ON(segCnt <= 1);
+ WARN_ON_ONCE(segCnt == 0);
mss = rcdlro->mss;
if (unlikely(segCnt <= 1))
segCnt = 0;
/*
* Version numbers
*/
-#define VMXNET3_DRIVER_VERSION_STRING "1.4.7.0-k"
+#define VMXNET3_DRIVER_VERSION_STRING "1.4.8.0-k"
/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
-#define VMXNET3_DRIVER_VERSION_NUM 0x01040700
+#define VMXNET3_DRIVER_VERSION_NUM 0x01040800
#if defined(CONFIG_PCI_MSI)
/* RSS only makes sense if MSI-X is supported. */
if (data[IFLA_VXLAN_REMCSUM_NOPARTIAL])
conf.flags |= VXLAN_F_REMCSUM_NOPARTIAL;
+ if (tb[IFLA_MTU])
+ conf.mtu = nla_get_u32(tb[IFLA_MTU]);
+
err = vxlan_dev_configure(src_net, dev, &conf);
switch (err) {
case -ENODEV:
const u8 *mac, struct station_info *sinfo)
{
struct brcmf_if *ifp = netdev_priv(ndev);
+ struct brcmf_scb_val_le scb_val;
s32 err = 0;
struct brcmf_sta_info_le sta_info_le;
u32 sta_flags;
u32 is_tdls_peer;
s32 total_rssi;
s32 count_rssi;
+ int rssi;
u32 i;
brcmf_dbg(TRACE, "Enter, MAC %pM\n", mac);
sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL);
total_rssi /= count_rssi;
sinfo->signal = total_rssi;
+ } else if (test_bit(BRCMF_VIF_STATUS_CONNECTED,
+ &ifp->vif->sme_state)) {
+ memset(&scb_val, 0, sizeof(scb_val));
+ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_RSSI,
+ &scb_val, sizeof(scb_val));
+ if (err) {
+ brcmf_err("Could not get rssi (%d)\n", err);
+ goto done;
+ } else {
+ rssi = le32_to_cpu(scb_val.val);
+ sinfo->filled |= BIT(NL80211_STA_INFO_SIGNAL);
+ sinfo->signal = rssi;
+ brcmf_dbg(CONN, "RSSI %d dBm\n", rssi);
+ }
}
}
done:
brcmu_pkt_buf_free_skb(skb);
return;
}
+
+ skb->protocol = eth_type_trans(skb, ifp->ndev);
brcmf_netif_rx(ifp, skb);
}
if (!info->attrs[HWSIM_ATTR_ADDR_TRANSMITTER] ||
!info->attrs[HWSIM_ATTR_FLAGS] ||
!info->attrs[HWSIM_ATTR_COOKIE] ||
+ !info->attrs[HWSIM_ATTR_SIGNAL] ||
!info->attrs[HWSIM_ATTR_TX_INFO])
goto out;
void rtl_addr_delay(u32 addr)
{
if (addr == 0xfe)
- msleep(50);
+ mdelay(50);
else if (addr == 0xfd)
msleep(5);
else if (addr == 0xfc)
rtl_addr_delay(addr);
} else {
rtl_set_rfreg(hw, rfpath, addr, mask, data);
- usleep_range(1, 2);
+ udelay(1);
}
}
EXPORT_SYMBOL(rtl_rfreg_delay);
rtl_addr_delay(addr);
} else {
rtl_set_bbreg(hw, addr, MASKDWORD, data);
- usleep_range(1, 2);
+ udelay(1);
}
}
EXPORT_SYMBOL(rtl_bb_delay);
static void nvme_dev_unmap(struct nvme_dev *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev->dev);
+ int bars;
+
if (dev->bar)
iounmap(dev->bar);
- pci_release_regions(to_pci_dev(dev->dev));
+
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ pci_release_selected_regions(pdev, bars);
}
static void nvme_pci_disable(struct nvme_dev *dev)
return 0;
release:
- pci_release_regions(pdev);
+ pci_release_selected_regions(pdev, bars);
return -ENODEV;
}
struct device_node **nodepp)
{
struct device_node *root;
- int offset = 0, depth = 0;
+ int offset = 0, depth = 0, initial_depth = 0;
#define FDT_MAX_DEPTH 64
unsigned int fpsizes[FDT_MAX_DEPTH];
struct device_node *nps[FDT_MAX_DEPTH];
if (nodepp)
*nodepp = NULL;
+ /*
+ * We're unflattening device sub-tree if @dad is valid. There are
+ * possibly multiple nodes in the first level of depth. We need
+ * set @depth to 1 to make fdt_next_node() happy as it bails
+ * immediately when negative @depth is found. Otherwise, the device
+ * nodes except the first one won't be unflattened successfully.
+ */
+ if (dad)
+ depth = initial_depth = 1;
+
root = dad;
fpsizes[depth] = dad ? strlen(of_node_full_name(dad)) : 0;
nps[depth] = dad;
+
for (offset = 0;
- offset >= 0 && depth >= 0;
+ offset >= 0 && depth >= initial_depth;
offset = fdt_next_node(blob, offset, &depth)) {
if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH))
continue;
EXPORT_SYMBOL_GPL(of_irq_to_resource);
/**
- * of_irq_get - Decode a node's IRQ and return it as a Linux irq number
+ * of_irq_get - Decode a node's IRQ and return it as a Linux IRQ number
* @dev: pointer to device tree node
- * @index: zero-based index of the irq
- *
- * Returns Linux irq number on success, or -EPROBE_DEFER if the irq domain
- * is not yet created.
+ * @index: zero-based index of the IRQ
*
+ * Returns Linux IRQ number on success, or 0 on the IRQ mapping failure, or
+ * -EPROBE_DEFER if the IRQ domain is not yet created, or error code in case
+ * of any other failure.
*/
int of_irq_get(struct device_node *dev, int index)
{
EXPORT_SYMBOL_GPL(of_irq_get);
/**
- * of_irq_get_byname - Decode a node's IRQ and return it as a Linux irq number
+ * of_irq_get_byname - Decode a node's IRQ and return it as a Linux IRQ number
* @dev: pointer to device tree node
- * @name: irq name
+ * @name: IRQ name
*
- * Returns Linux irq number on success, or -EPROBE_DEFER if the irq domain
- * is not yet created, or error code in case of any other failure.
+ * Returns Linux IRQ number on success, or 0 on the IRQ mapping failure, or
+ * -EPROBE_DEFER if the IRQ domain is not yet created, or error code in case
+ * of any other failure.
*/
int of_irq_get_byname(struct device_node *dev, const char *name)
{
#include <linux/sizes.h>
#include <linux/of_reserved_mem.h>
#include <linux/sort.h>
+#include <linux/slab.h>
#define MAX_RESERVED_REGIONS 16
static struct reserved_mem reserved_mem[MAX_RESERVED_REGIONS];
}
/* Need adjust the alignment to satisfy the CMA requirement */
- if (IS_ENABLED(CONFIG_CMA) && of_flat_dt_is_compatible(node, "shared-dma-pool"))
- align = max(align, (phys_addr_t)PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order));
+ if (IS_ENABLED(CONFIG_CMA)
+ && of_flat_dt_is_compatible(node, "shared-dma-pool")
+ && of_get_flat_dt_prop(node, "reusable", NULL)
+ && !of_get_flat_dt_prop(node, "no-map", NULL)) {
+ unsigned long order =
+ max_t(unsigned long, MAX_ORDER - 1, pageblock_order);
+
+ align = max(align, (phys_addr_t)PAGE_SIZE << order);
+ }
prop = of_get_flat_dt_prop(node, "alloc-ranges", &len);
if (prop) {
return NULL;
}
+struct rmem_assigned_device {
+ struct device *dev;
+ struct reserved_mem *rmem;
+ struct list_head list;
+};
+
+static LIST_HEAD(of_rmem_assigned_device_list);
+static DEFINE_MUTEX(of_rmem_assigned_device_mutex);
+
/**
- * of_reserved_mem_device_init() - assign reserved memory region to given device
+ * of_reserved_mem_device_init_by_idx() - assign reserved memory region to
+ * given device
+ * @dev: Pointer to the device to configure
+ * @np: Pointer to the device_node with 'reserved-memory' property
+ * @idx: Index of selected region
+ *
+ * This function assigns respective DMA-mapping operations based on reserved
+ * memory region specified by 'memory-region' property in @np node to the @dev
+ * device. When driver needs to use more than one reserved memory region, it
+ * should allocate child devices and initialize regions by name for each of
+ * child device.
*
- * This function assign memory region pointed by "memory-region" device tree
- * property to the given device.
+ * Returns error code or zero on success.
*/
-int of_reserved_mem_device_init(struct device *dev)
+int of_reserved_mem_device_init_by_idx(struct device *dev,
+ struct device_node *np, int idx)
{
+ struct rmem_assigned_device *rd;
+ struct device_node *target;
struct reserved_mem *rmem;
- struct device_node *np;
int ret;
- np = of_parse_phandle(dev->of_node, "memory-region", 0);
- if (!np)
- return -ENODEV;
+ if (!np || !dev)
+ return -EINVAL;
+
+ target = of_parse_phandle(np, "memory-region", idx);
+ if (!target)
+ return -EINVAL;
- rmem = __find_rmem(np);
- of_node_put(np);
+ rmem = __find_rmem(target);
+ of_node_put(target);
if (!rmem || !rmem->ops || !rmem->ops->device_init)
return -EINVAL;
+ rd = kmalloc(sizeof(struct rmem_assigned_device), GFP_KERNEL);
+ if (!rd)
+ return -ENOMEM;
+
ret = rmem->ops->device_init(rmem, dev);
- if (ret == 0)
+ if (ret == 0) {
+ rd->dev = dev;
+ rd->rmem = rmem;
+
+ mutex_lock(&of_rmem_assigned_device_mutex);
+ list_add(&rd->list, &of_rmem_assigned_device_list);
+ mutex_unlock(&of_rmem_assigned_device_mutex);
+
dev_info(dev, "assigned reserved memory node %s\n", rmem->name);
+ } else {
+ kfree(rd);
+ }
return ret;
}
-EXPORT_SYMBOL_GPL(of_reserved_mem_device_init);
+EXPORT_SYMBOL_GPL(of_reserved_mem_device_init_by_idx);
/**
* of_reserved_mem_device_release() - release reserved memory device structures
+ * @dev: Pointer to the device to deconfigure
*
* This function releases structures allocated for memory region handling for
* the given device.
*/
void of_reserved_mem_device_release(struct device *dev)
{
- struct reserved_mem *rmem;
- struct device_node *np;
-
- np = of_parse_phandle(dev->of_node, "memory-region", 0);
- if (!np)
- return;
-
- rmem = __find_rmem(np);
- of_node_put(np);
+ struct rmem_assigned_device *rd;
+ struct reserved_mem *rmem = NULL;
+
+ mutex_lock(&of_rmem_assigned_device_mutex);
+ list_for_each_entry(rd, &of_rmem_assigned_device_list, list) {
+ if (rd->dev == dev) {
+ rmem = rd->rmem;
+ list_del(&rd->list);
+ kfree(rd);
+ break;
+ }
+ }
+ mutex_unlock(&of_rmem_assigned_device_mutex);
if (!rmem || !rmem->ops || !rmem->ops->device_release)
return;
/* For SPIs, we need to track the affinity per IRQ */
if (using_spi) {
- if (i >= pdev->num_resources) {
- of_node_put(dn);
+ if (i >= pdev->num_resources)
break;
- }
irqs[i] = cpu;
}
/* Keep track of the CPUs containing this PMU type */
cpumask_set_cpu(cpu, &pmu->supported_cpus);
- of_node_put(dn);
i++;
} while (1);
armpmu_init(pmu);
- if (!__oprofile_cpu_pmu)
- __oprofile_cpu_pmu = pmu;
-
pmu->plat_device = pdev;
if (node && (of_id = of_match_node(of_table, pdev->dev.of_node))) {
if (ret)
goto out_destroy;
+ if (!__oprofile_cpu_pmu)
+ __oprofile_cpu_pmu = pmu;
+
pr_info("enabled with %s PMU driver, %d counters available\n",
pmu->name, pmu->num_events);
out_free:
pr_info("%s: failed to register PMU devices!\n",
of_node_full_name(node));
+ kfree(pmu->irq_affinity);
kfree(pmu);
return ret;
}
const struct mtk_desc_pin *pin;
chained_irq_enter(chip, desc);
- for (eint_num = 0; eint_num < pctl->devdata->ap_num; eint_num += 32) {
+ for (eint_num = 0;
+ eint_num < pctl->devdata->ap_num;
+ eint_num += 32, reg += 4) {
status = readl(reg);
- reg += 4;
while (status) {
offset = __ffs(status);
index = eint_num + offset;
clk_enable(nmk_chip->clk);
- dir = !!(readl(nmk_chip->addr + NMK_GPIO_DIR) & BIT(offset));
+ dir = !(readl(nmk_chip->addr + NMK_GPIO_DIR) & BIT(offset));
clk_disable(nmk_chip->clk);
break;
case PTP_SYS_OFFSET:
- sysoff = kmalloc(sizeof(*sysoff), GFP_KERNEL);
- if (!sysoff) {
- err = -ENOMEM;
- break;
- }
- if (copy_from_user(sysoff, (void __user *)arg,
- sizeof(*sysoff))) {
- err = -EFAULT;
+ sysoff = memdup_user((void __user *)arg, sizeof(*sysoff));
+ if (IS_ERR(sysoff)) {
+ err = PTR_ERR(sysoff);
+ sysoff = NULL;
break;
}
if (sysoff->n_samples > PTP_MAX_SAMPLES) {
*/
#define AAC_QUIRK_SCSI_32 0x0020
+/*
+ * SRC based adapters support the AifReqEvent functions
+ */
+#define AAC_QUIRK_SRC 0x0040
+
/*
* The adapter interface specs all queues to be located in the same
* physically contiguous block. The host structure that defines the
{ aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Catch All */
{ aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */
{ aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec NEMER/ARK Catch All */
- { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 6 (Tupelo) */
- { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 7 (Denali) */
- { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec PMC Series 8 */
- { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec PMC Series 9 */
+ { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 6 (Tupelo) */
+ { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 7 (Denali) */
+ { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 8 */
+ { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC } /* Adaptec PMC Series 9 */
};
/**
else
shost->this_id = shost->max_id;
- aac_intr_normal(aac, 0, 2, 0, NULL);
+ if (aac_drivers[index].quirks & AAC_QUIRK_SRC)
+ aac_intr_normal(aac, 0, 2, 0, NULL);
/*
* dmb - we may need to move the setting of these parms somewhere else once
ActiveCableEventData =
(Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData;
if (ActiveCableEventData->ReasonCode ==
- MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER)
+ MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) {
pr_info(MPT3SAS_FMT "Currently an active cable with ReceptacleID %d",
ioc->name, ActiveCableEventData->ReceptacleID);
pr_info("cannot be powered and devices connected to this active cable");
pr_info("will not be seen. This active cable");
pr_info("requires %d mW of power",
ActiveCableEventData->ActiveCablePowerRequirement);
+ }
break;
default: /* ignore the rest */
{"PIONEER", "CD-ROM DRM-624X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
{"Promise", "VTrak E610f", NULL, BLIST_SPARSELUN | BLIST_NO_RSOC},
{"Promise", "", NULL, BLIST_SPARSELUN},
+ {"QEMU", "QEMU CD-ROM", NULL, BLIST_SKIP_VPD_PAGES},
{"QNAP", "iSCSI Storage", NULL, BLIST_MAX_1024},
{"SYNOLOGY", "iSCSI Storage", NULL, BLIST_MAX_1024},
{"QUANTUM", "XP34301", "1071", BLIST_NOTQ},
}
/*
- * If we finished all bytes in the request we are done now.
+ * special case: failed zero length commands always need to
+ * drop down into the retry code. Otherwise, if we finished
+ * all bytes in the request we are done now.
*/
- if (!scsi_end_request(req, error, good_bytes, 0))
+ if (!(blk_rq_bytes(req) == 0 && error) &&
+ !scsi_end_request(req, error, good_bytes, 0))
return;
/*
**/
static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
{
- struct scsi_disk *sdkp = scsi_disk(disk);
- struct scsi_device *sdp = sdkp->device;
+ struct scsi_disk *sdkp = scsi_disk_get(disk);
+ struct scsi_device *sdp;
struct scsi_sense_hdr *sshdr = NULL;
int retval;
+ if (!sdkp)
+ return 0;
+
+ sdp = sdkp->device;
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
/*
kfree(sshdr);
retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
sdp->changed = 0;
+ scsi_disk_put(sdkp);
return retval;
}
if (sdkp->opt_xfer_blocks &&
sdkp->opt_xfer_blocks <= dev_max &&
sdkp->opt_xfer_blocks <= SD_DEF_XFER_BLOCKS &&
- sdkp->opt_xfer_blocks * sdp->sector_size >= PAGE_SIZE)
- rw_max = q->limits.io_opt =
- sdkp->opt_xfer_blocks * sdp->sector_size;
- else
+ logical_to_bytes(sdp, sdkp->opt_xfer_blocks) >= PAGE_SIZE) {
+ q->limits.io_opt = logical_to_bytes(sdp, sdkp->opt_xfer_blocks);
+ rw_max = logical_to_sectors(sdp, sdkp->opt_xfer_blocks);
+ } else
rw_max = BLK_DEF_MAX_SECTORS;
/* Combine with controller limits */
return blocks << (ilog2(sdev->sector_size) - 9);
}
+static inline unsigned int logical_to_bytes(struct scsi_device *sdev, sector_t blocks)
+{
+ return blocks * sdev->sector_size;
+}
+
/*
* A DIF-capable target device can be formatted with different
* protection schemes. Currently 0 through 3 are defined:
goto free_power_table;
}
- snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
- cpufreq_dev->id);
-
- cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev,
- &cpufreq_cooling_ops);
- if (IS_ERR(cool_dev))
- goto remove_idr;
-
/* Fill freq-table in descending order of frequencies */
for (i = 0, freq = -1; i <= cpufreq_dev->max_level; i++) {
freq = find_next_max(table, freq);
pr_debug("%s: freq:%u KHz\n", __func__, freq);
}
+ snprintf(dev_name, sizeof(dev_name), "thermal-cpufreq-%d",
+ cpufreq_dev->id);
+
+ cool_dev = thermal_of_cooling_device_register(np, dev_name, cpufreq_dev,
+ &cpufreq_cooling_ops);
+ if (IS_ERR(cool_dev))
+ goto remove_idr;
+
cpufreq_dev->clipped_freq = cpufreq_dev->freq_table[0];
cpufreq_dev->cool_dev = cool_dev;
return -ENODEV;
d->raw_bd = bd;
- ret = acpi_video_get_levels(ACPI_COMPANION(&pdev->dev), &d->br);
+ ret = acpi_video_get_levels(ACPI_COMPANION(&pdev->dev), &d->br, NULL);
if (ret)
return ret;
All modern Linux systems use the Unix98 ptys. Say Y unless
you're on an embedded system and want to conserve memory.
-config DEVPTS_MULTIPLE_INSTANCES
- bool "Support multiple instances of devpts"
- depends on UNIX98_PTYS
- default n
- ---help---
- Enable support for multiple instances of devpts filesystem.
- If you want to have isolated PTY namespaces (eg: in containers),
- say Y here. Otherwise, say N. If enabled, each mount of devpts
- filesystem with the '-o newinstance' option will create an
- independent PTY namespace.
-
config LEGACY_PTYS
bool "Legacy (BSD) PTY support"
default y
else
fsi = tty->link->driver_data;
devpts_kill_index(fsi, tty->index);
- devpts_put_ref(fsi);
+ devpts_release(fsi);
}
static const struct tty_operations ptm_unix98_ops = {
if (retval)
return retval;
- fsi = devpts_get_ref(inode, filp);
- retval = -ENODEV;
- if (!fsi)
+ fsi = devpts_acquire(filp);
+ if (IS_ERR(fsi)) {
+ retval = PTR_ERR(fsi);
goto out_free_file;
+ }
/* find a device that is not in use. */
mutex_lock(&devpts_mutex);
retval = index;
if (index < 0)
- goto out_put_ref;
+ goto out_put_fsi;
mutex_lock(&tty_mutex);
return retval;
out:
devpts_kill_index(fsi, index);
-out_put_ref:
- devpts_put_ref(fsi);
+out_put_fsi:
+ devpts_release(fsi);
out_free_file:
tty_free_file(filp);
return retval;
if (pci_write_vpd(pdev, addr & ~PCI_VPD_ADDR_F, 4, &data) != 4)
return count;
} else {
- if (pci_read_vpd(pdev, addr, 4, &data) != 4)
+ data = 0;
+ if (pci_read_vpd(pdev, addr, 4, &data) < 0)
return count;
*pdata = cpu_to_le32(data);
}
static void vfio_intx_disable(struct vfio_pci_device *vdev)
{
- vfio_intx_set_signal(vdev, -1);
vfio_virqfd_disable(&vdev->ctx[0].unmask);
vfio_virqfd_disable(&vdev->ctx[0].mask);
+ vfio_intx_set_signal(vdev, -1);
vdev->irq_type = VFIO_PCI_NUM_IRQS;
vdev->num_ctx = 0;
kfree(vdev->ctx);
struct pci_dev *pdev = vdev->pdev;
int i;
- vfio_msi_set_block(vdev, 0, vdev->num_ctx, NULL, msix);
-
for (i = 0; i < vdev->num_ctx; i++) {
vfio_virqfd_disable(&vdev->ctx[i].unmask);
vfio_virqfd_disable(&vdev->ctx[i].mask);
}
+ vfio_msi_set_block(vdev, 0, vdev->num_ctx, NULL, msix);
+
if (msix) {
pci_disable_msix(vdev->pdev);
kfree(vdev->msix);
unsigned long pfn, long npage, int prot)
{
long i;
- int ret;
+ int ret = 0;
for (i = 0; i < npage; i++, pfn++, iova += PAGE_SIZE) {
ret = iommu_map(domain->domain, iova,
{
void __iomem *base = core->base;
const unsigned long long iclk = 266000000; /* DSS L3 ICLK */
- const unsigned ss_scl_high = 4000; /* ns */
- const unsigned ss_scl_low = 4700; /* ns */
+ const unsigned ss_scl_high = 4600; /* ns */
+ const unsigned ss_scl_low = 5400; /* ns */
const unsigned fs_scl_high = 600; /* ns */
const unsigned fs_scl_low = 1300; /* ns */
const unsigned sda_hold = 1000; /* ns */
c = (ptr[1] >> 6) & 0x3;
m = (ptr[1] >> 4) & 0x3;
- r = (ptr[1] >> 0) & 0x3;
+ r = (ptr[1] >> 0) & 0xf;
itc = (ptr[2] >> 7) & 0x1;
ec = (ptr[2] >> 4) & 0x7;
goto end_coredump;
/* Align to page */
- if (!dump_skip(cprm, dataoff - cprm->file->f_pos))
+ if (!dump_skip(cprm, dataoff - cprm->pos))
goto end_coredump;
for (i = 0, vma = first_vma(current, gate_vma); vma != NULL;
goto end_coredump;
}
- if (!dump_skip(cprm, dataoff - cprm->file->f_pos))
+ if (!dump_skip(cprm, dataoff - cprm->pos))
goto end_coredump;
if (!elf_fdpic_dump_segments(cprm))
if (tm->op == MOD_LOG_KEY_REMOVE_WHILE_FREEING) {
BUG_ON(tm->slot != 0);
- eb_rewin = alloc_dummy_extent_buffer(fs_info, eb->start);
+ eb_rewin = alloc_dummy_extent_buffer(fs_info, eb->start,
+ eb->len);
if (!eb_rewin) {
btrfs_tree_read_unlock_blocking(eb);
free_extent_buffer(eb);
} else if (old_root) {
btrfs_tree_read_unlock(eb_root);
free_extent_buffer(eb_root);
- eb = alloc_dummy_extent_buffer(root->fs_info, logical);
+ eb = alloc_dummy_extent_buffer(root->fs_info, logical,
+ root->nodesize);
} else {
btrfs_set_lock_blocking_rw(eb_root, BTRFS_READ_LOCK);
eb = btrfs_clone_extent_buffer(eb_root);
u64 bytenr)
{
if (btrfs_test_is_dummy_root(root))
- return alloc_test_extent_buffer(root->fs_info, bytenr);
+ return alloc_test_extent_buffer(root->fs_info, bytenr,
+ root->nodesize);
return alloc_extent_buffer(root->fs_info, bytenr);
}
#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
/* Should only be used by the testing infrastructure */
-struct btrfs_root *btrfs_alloc_dummy_root(void)
+struct btrfs_root *btrfs_alloc_dummy_root(u32 sectorsize, u32 nodesize)
{
struct btrfs_root *root;
root = btrfs_alloc_root(NULL, GFP_KERNEL);
if (!root)
return ERR_PTR(-ENOMEM);
- __setup_root(4096, 4096, 4096, root, NULL, 1);
+ /* We don't use the stripesize in selftest, set it as sectorsize */
+ __setup_root(nodesize, sectorsize, sectorsize, root, NULL,
+ BTRFS_ROOT_TREE_OBJECTID);
set_bit(BTRFS_ROOT_DUMMY_ROOT, &root->state);
root->alloc_bytenr = 0;
* Hint to catch really bogus numbers, bitflips or so, more exact checks are
* done later
*/
+ if (btrfs_super_bytes_used(sb) < 6 * btrfs_super_nodesize(sb)) {
+ btrfs_err(fs_info, "bytes_used is too small %llu",
+ btrfs_super_bytes_used(sb));
+ ret = -EINVAL;
+ }
+ if (!is_power_of_2(btrfs_super_stripesize(sb)) ||
+ btrfs_super_stripesize(sb) != sectorsize) {
+ btrfs_err(fs_info, "invalid stripesize %u",
+ btrfs_super_stripesize(sb));
+ ret = -EINVAL;
+ }
if (btrfs_super_num_devices(sb) > (1UL << 31))
printk(KERN_WARNING "BTRFS: suspicious number of devices: %llu\n",
btrfs_super_num_devices(sb));
void btrfs_free_fs_root(struct btrfs_root *root);
#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
-struct btrfs_root *btrfs_alloc_dummy_root(void);
+struct btrfs_root *btrfs_alloc_dummy_root(u32 sectorsize, u32 nodesize);
#endif
/*
struct btrfs_bio *bbio = NULL;
+ /*
+ * Avoid races with device replace and make sure our bbio has devices
+ * associated to its stripes that don't go away while we are discarding.
+ */
+ btrfs_bio_counter_inc_blocked(root->fs_info);
/* Tell the block device(s) that the sectors can be discarded */
ret = btrfs_map_block(root->fs_info, REQ_DISCARD,
bytenr, &num_bytes, &bbio, 0);
}
btrfs_put_bbio(bbio);
}
+ btrfs_bio_counter_dec(root->fs_info);
if (actual_bytes)
*actual_bytes = discarded_bytes;
bio->bi_iter.bi_size = 0;
map_length = length;
+ /*
+ * Avoid races with device replace and make sure our bbio has devices
+ * associated to its stripes that don't go away while we are doing the
+ * read repair operation.
+ */
+ btrfs_bio_counter_inc_blocked(fs_info);
ret = btrfs_map_block(fs_info, WRITE, logical,
&map_length, &bbio, mirror_num);
if (ret) {
+ btrfs_bio_counter_dec(fs_info);
bio_put(bio);
return -EIO;
}
dev = bbio->stripes[mirror_num-1].dev;
btrfs_put_bbio(bbio);
if (!dev || !dev->bdev || !dev->writeable) {
+ btrfs_bio_counter_dec(fs_info);
bio_put(bio);
return -EIO;
}
if (btrfsic_submit_bio_wait(WRITE_SYNC, bio)) {
/* try to remap that extent elsewhere? */
+ btrfs_bio_counter_dec(fs_info);
bio_put(bio);
btrfs_dev_stat_inc_and_print(dev, BTRFS_DEV_STAT_WRITE_ERRS);
return -EIO;
"read error corrected: ino %llu off %llu (dev %s sector %llu)",
btrfs_ino(inode), start,
rcu_str_deref(dev->name), sector);
+ btrfs_bio_counter_dec(fs_info);
bio_put(bio);
return 0;
}
}
struct extent_buffer *alloc_dummy_extent_buffer(struct btrfs_fs_info *fs_info,
- u64 start)
+ u64 start, u32 nodesize)
{
unsigned long len;
if (!fs_info) {
/*
* Called only from tests that don't always have a fs_info
- * available, but we know that nodesize is 4096
+ * available
*/
- len = 4096;
+ len = nodesize;
} else {
len = fs_info->tree_root->nodesize;
}
#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
struct extent_buffer *alloc_test_extent_buffer(struct btrfs_fs_info *fs_info,
- u64 start)
+ u64 start, u32 nodesize)
{
struct extent_buffer *eb, *exists = NULL;
int ret;
eb = find_extent_buffer(fs_info, start);
if (eb)
return eb;
- eb = alloc_dummy_extent_buffer(fs_info, start);
+ eb = alloc_dummy_extent_buffer(fs_info, start, nodesize);
if (!eb)
return NULL;
eb->fs_info = fs_info;
struct extent_buffer *__alloc_dummy_extent_buffer(struct btrfs_fs_info *fs_info,
u64 start, unsigned long len);
struct extent_buffer *alloc_dummy_extent_buffer(struct btrfs_fs_info *fs_info,
- u64 start);
+ u64 start, u32 nodesize);
struct extent_buffer *btrfs_clone_extent_buffer(struct extent_buffer *src);
struct extent_buffer *find_extent_buffer(struct btrfs_fs_info *fs_info,
u64 start);
u64 *end, u64 max_bytes);
#endif
struct extent_buffer *alloc_test_extent_buffer(struct btrfs_fs_info *fs_info,
- u64 start);
+ u64 start, u32 nodesize);
#endif
#include "inode-map.h"
#include "volumes.h"
-#define BITS_PER_BITMAP (PAGE_SIZE * 8)
+#define BITS_PER_BITMAP (PAGE_SIZE * 8UL)
#define MAX_CACHE_BYTES_PER_GIG SZ_32K
struct btrfs_trim_range {
u64 offset)
{
u64 bitmap_start;
- u32 bytes_per_bitmap;
+ u64 bytes_per_bitmap;
bytes_per_bitmap = BITS_PER_BITMAP * ctl->unit;
bitmap_start = offset - ctl->start;
- bitmap_start = div_u64(bitmap_start, bytes_per_bitmap);
+ bitmap_start = div64_u64(bitmap_start, bytes_per_bitmap);
bitmap_start *= bytes_per_bitmap;
bitmap_start += ctl->start;
u64 bitmap_bytes;
u64 extent_bytes;
u64 size = block_group->key.offset;
- u32 bytes_per_bg = BITS_PER_BITMAP * ctl->unit;
- u32 max_bitmaps = div_u64(size + bytes_per_bg - 1, bytes_per_bg);
+ u64 bytes_per_bg = BITS_PER_BITMAP * ctl->unit;
+ u64 max_bitmaps = div64_u64(size + bytes_per_bg - 1, bytes_per_bg);
- max_bitmaps = max_t(u32, max_bitmaps, 1);
+ max_bitmaps = max_t(u64, max_bitmaps, 1);
ASSERT(ctl->total_bitmaps <= max_bitmaps);
* sure we don't go over our overall goal of MAX_CACHE_BYTES_PER_GIG as
* we add more bitmaps.
*/
- bitmap_bytes = (ctl->total_bitmaps + 1) * PAGE_SIZE;
+ bitmap_bytes = (ctl->total_bitmaps + 1) * ctl->unit;
if (bitmap_bytes >= max_bytes) {
ctl->extents_thresh = 0;
if (tmp->offset + tmp->bytes < offset)
break;
if (offset + bytes < tmp->offset) {
- n = rb_prev(&info->offset_index);
+ n = rb_prev(&tmp->offset_index);
continue;
}
info = tmp;
if (offset + bytes < tmp->offset)
break;
if (tmp->offset + tmp->bytes < offset) {
- n = rb_next(&info->offset_index);
+ n = rb_next(&tmp->offset_index);
continue;
}
info = tmp;
return PTR_ERR_OR_ZERO(tfm);
}
+const char* btrfs_crc32c_impl(void)
+{
+ return crypto_tfm_alg_driver_name(crypto_shash_tfm(tfm));
+}
+
void btrfs_hash_exit(void)
{
crypto_free_shash(tfm);
int __init btrfs_hash_init(void);
void btrfs_hash_exit(void);
+const char* btrfs_crc32c_impl(void);
u32 btrfs_crc32c(u32 crc, const void *address, unsigned int length);
* existing will always be non-NULL, since there must be
* extent causing the -EEXIST.
*/
- if (start >= extent_map_end(existing) ||
+ if (existing->start == em->start &&
+ extent_map_end(existing) == extent_map_end(em) &&
+ em->block_start == existing->block_start) {
+ /*
+ * these two extents are the same, it happens
+ * with inlines especially
+ */
+ free_extent_map(em);
+ em = existing;
+ err = 0;
+
+ } else if (start >= extent_map_end(existing) ||
start <= existing->start) {
/*
* The existing extent map is the one nearest to
return count;
}
-void btrfs_wait_ordered_roots(struct btrfs_fs_info *fs_info, int nr,
+int btrfs_wait_ordered_roots(struct btrfs_fs_info *fs_info, int nr,
const u64 range_start, const u64 range_len)
{
struct btrfs_root *root;
struct list_head splice;
int done;
+ int total_done = 0;
INIT_LIST_HEAD(&splice);
done = btrfs_wait_ordered_extents(root, nr,
range_start, range_len);
btrfs_put_fs_root(root);
+ total_done += done;
spin_lock(&fs_info->ordered_root_lock);
if (nr != -1) {
list_splice_tail(&splice, &fs_info->ordered_roots);
spin_unlock(&fs_info->ordered_root_lock);
mutex_unlock(&fs_info->ordered_operations_mutex);
+
+ return total_done;
}
/*
u32 *sum, int len);
int btrfs_wait_ordered_extents(struct btrfs_root *root, int nr,
const u64 range_start, const u64 range_len);
-void btrfs_wait_ordered_roots(struct btrfs_fs_info *fs_info, int nr,
+int btrfs_wait_ordered_roots(struct btrfs_fs_info *fs_info, int nr,
const u64 range_start, const u64 range_len);
void btrfs_get_logged_extents(struct inode *inode,
struct list_head *logged_list,
do {
enqueued = 0;
+ mutex_lock(&fs_devices->device_list_mutex);
list_for_each_entry(device, &fs_devices->devices, dev_list) {
if (atomic_read(&device->reada_in_flight) <
MAX_IN_FLIGHT)
enqueued += reada_start_machine_dev(fs_info,
device);
}
+ mutex_unlock(&fs_devices->device_list_mutex);
total += enqueued;
} while (enqueued && total < 10000);
*/
scrub_pause_on(fs_info);
ret = btrfs_inc_block_group_ro(root, cache);
+ if (!ret && is_dev_replace) {
+ /*
+ * If we are doing a device replace wait for any tasks
+ * that started dellaloc right before we set the block
+ * group to RO mode, as they might have just allocated
+ * an extent from it or decided they could do a nocow
+ * write. And if any such tasks did that, wait for their
+ * ordered extents to complete and then commit the
+ * current transaction, so that we can later see the new
+ * extent items in the extent tree - the ordered extents
+ * create delayed data references (for cow writes) when
+ * they complete, which will be run and insert the
+ * corresponding extent items into the extent tree when
+ * we commit the transaction they used when running
+ * inode.c:btrfs_finish_ordered_io(). We later use
+ * the commit root of the extent tree to find extents
+ * to copy from the srcdev into the tgtdev, and we don't
+ * want to miss any new extents.
+ */
+ btrfs_wait_block_group_reservations(cache);
+ btrfs_wait_nocow_writers(cache);
+ ret = btrfs_wait_ordered_roots(fs_info, -1,
+ cache->key.objectid,
+ cache->key.offset);
+ if (ret > 0) {
+ struct btrfs_trans_handle *trans;
+
+ trans = btrfs_join_transaction(root);
+ if (IS_ERR(trans))
+ ret = PTR_ERR(trans);
+ else
+ ret = btrfs_commit_transaction(trans,
+ root);
+ if (ret) {
+ scrub_pause_off(fs_info);
+ btrfs_put_block_group(cache);
+ break;
+ }
+ }
+ }
scrub_pause_off(fs_info);
if (ret == 0) {
break;
}
+ btrfs_dev_replace_lock(&fs_info->dev_replace, 1);
dev_replace->cursor_right = found_key.offset + length;
dev_replace->cursor_left = found_key.offset;
dev_replace->item_needs_writeback = 1;
+ btrfs_dev_replace_unlock(&fs_info->dev_replace, 1);
ret = scrub_chunk(sctx, scrub_dev, chunk_offset, length,
found_key.offset, cache, is_dev_replace);
scrub_pause_off(fs_info);
+ btrfs_dev_replace_lock(&fs_info->dev_replace, 1);
+ dev_replace->cursor_left = dev_replace->cursor_right;
+ dev_replace->item_needs_writeback = 1;
+ btrfs_dev_replace_unlock(&fs_info->dev_replace, 1);
+
if (ro_set)
btrfs_dec_block_group_ro(root, cache);
ret = -ENOMEM;
break;
}
-
- dev_replace->cursor_left = dev_replace->cursor_right;
- dev_replace->item_needs_writeback = 1;
skip:
key.offset = found_key.offset + length;
btrfs_release_path(path);
static void btrfs_print_mod_info(void)
{
- printk(KERN_INFO "Btrfs loaded"
+ printk(KERN_INFO "Btrfs loaded, crc32c=%s"
#ifdef CONFIG_BTRFS_DEBUG
", debug=on"
#endif
#ifdef CONFIG_BTRFS_FS_CHECK_INTEGRITY
", integrity-checker=on"
#endif
- "\n");
+ "\n",
+ btrfs_crc32c_impl());
}
static int btrfs_run_sanity_tests(void)
{
- int ret;
-
+ int ret, i;
+ u32 sectorsize, nodesize;
+ u32 test_sectorsize[] = {
+ PAGE_SIZE,
+ };
ret = btrfs_init_test_fs();
if (ret)
return ret;
-
- ret = btrfs_test_free_space_cache();
- if (ret)
- goto out;
- ret = btrfs_test_extent_buffer_operations();
- if (ret)
- goto out;
- ret = btrfs_test_extent_io();
- if (ret)
- goto out;
- ret = btrfs_test_inodes();
- if (ret)
- goto out;
- ret = btrfs_test_qgroups();
- if (ret)
- goto out;
- ret = btrfs_test_free_space_tree();
+ for (i = 0; i < ARRAY_SIZE(test_sectorsize); i++) {
+ sectorsize = test_sectorsize[i];
+ for (nodesize = sectorsize;
+ nodesize <= BTRFS_MAX_METADATA_BLOCKSIZE;
+ nodesize <<= 1) {
+ pr_info("BTRFS: selftest: sectorsize: %u nodesize: %u\n",
+ sectorsize, nodesize);
+ ret = btrfs_test_free_space_cache(sectorsize, nodesize);
+ if (ret)
+ goto out;
+ ret = btrfs_test_extent_buffer_operations(sectorsize,
+ nodesize);
+ if (ret)
+ goto out;
+ ret = btrfs_test_extent_io(sectorsize, nodesize);
+ if (ret)
+ goto out;
+ ret = btrfs_test_inodes(sectorsize, nodesize);
+ if (ret)
+ goto out;
+ ret = btrfs_test_qgroups(sectorsize, nodesize);
+ if (ret)
+ goto out;
+ ret = btrfs_test_free_space_tree(sectorsize, nodesize);
+ if (ret)
+ goto out;
+ }
+ }
out:
btrfs_destroy_test_fs();
return ret;
}
struct btrfs_block_group_cache *
-btrfs_alloc_dummy_block_group(unsigned long length)
+btrfs_alloc_dummy_block_group(unsigned long length, u32 sectorsize)
{
struct btrfs_block_group_cache *cache;
cache->key.objectid = 0;
cache->key.offset = length;
cache->key.type = BTRFS_BLOCK_GROUP_ITEM_KEY;
- cache->sectorsize = 4096;
- cache->full_stripe_len = 4096;
+ cache->sectorsize = sectorsize;
+ cache->full_stripe_len = sectorsize;
INIT_LIST_HEAD(&cache->list);
INIT_LIST_HEAD(&cache->cluster_list);
struct btrfs_root;
struct btrfs_trans_handle;
-int btrfs_test_free_space_cache(void);
-int btrfs_test_extent_buffer_operations(void);
-int btrfs_test_extent_io(void);
-int btrfs_test_inodes(void);
-int btrfs_test_qgroups(void);
-int btrfs_test_free_space_tree(void);
+int btrfs_test_free_space_cache(u32 sectorsize, u32 nodesize);
+int btrfs_test_extent_buffer_operations(u32 sectorsize, u32 nodesize);
+int btrfs_test_extent_io(u32 sectorsize, u32 nodesize);
+int btrfs_test_inodes(u32 sectorsize, u32 nodesize);
+int btrfs_test_qgroups(u32 sectorsize, u32 nodesize);
+int btrfs_test_free_space_tree(u32 sectorsize, u32 nodesize);
int btrfs_init_test_fs(void);
void btrfs_destroy_test_fs(void);
struct inode *btrfs_new_test_inode(void);
struct btrfs_fs_info *btrfs_alloc_dummy_fs_info(void);
void btrfs_free_dummy_root(struct btrfs_root *root);
struct btrfs_block_group_cache *
-btrfs_alloc_dummy_block_group(unsigned long length);
+btrfs_alloc_dummy_block_group(unsigned long length, u32 sectorsize);
void btrfs_free_dummy_block_group(struct btrfs_block_group_cache *cache);
void btrfs_init_dummy_trans(struct btrfs_trans_handle *trans);
#else
-static inline int btrfs_test_free_space_cache(void)
+static inline int btrfs_test_free_space_cache(u32 sectorsize, u32 nodesize)
{
return 0;
}
-static inline int btrfs_test_extent_buffer_operations(void)
+static inline int btrfs_test_extent_buffer_operations(u32 sectorsize,
+ u32 nodesize)
{
return 0;
}
static inline void btrfs_destroy_test_fs(void)
{
}
-static inline int btrfs_test_extent_io(void)
+static inline int btrfs_test_extent_io(u32 sectorsize, u32 nodesize)
{
return 0;
}
-static inline int btrfs_test_inodes(void)
+static inline int btrfs_test_inodes(u32 sectorsize, u32 nodesize)
{
return 0;
}
-static inline int btrfs_test_qgroups(void)
+static inline int btrfs_test_qgroups(u32 sectorsize, u32 nodesize)
{
return 0;
}
-static inline int btrfs_test_free_space_tree(void)
+static inline int btrfs_test_free_space_tree(u32 sectorsize, u32 nodesize)
{
return 0;
}
#include "../extent_io.h"
#include "../disk-io.h"
-static int test_btrfs_split_item(void)
+static int test_btrfs_split_item(u32 sectorsize, u32 nodesize)
{
struct btrfs_path *path;
struct btrfs_root *root;
test_msg("Running btrfs_split_item tests\n");
- root = btrfs_alloc_dummy_root();
+ root = btrfs_alloc_dummy_root(sectorsize, nodesize);
if (IS_ERR(root)) {
test_msg("Could not allocate root\n");
return PTR_ERR(root);
return -ENOMEM;
}
- path->nodes[0] = eb = alloc_dummy_extent_buffer(NULL, 4096);
+ path->nodes[0] = eb = alloc_dummy_extent_buffer(NULL, nodesize,
+ nodesize);
if (!eb) {
test_msg("Could not allocate dummy buffer\n");
ret = -ENOMEM;
return ret;
}
-int btrfs_test_extent_buffer_operations(void)
+int btrfs_test_extent_buffer_operations(u32 sectorsize, u32 nodesize)
{
- test_msg("Running extent buffer operation tests");
- return test_btrfs_split_item();
+ test_msg("Running extent buffer operation tests\n");
+ return test_btrfs_split_item(sectorsize, nodesize);
}
#include <linux/slab.h>
#include <linux/sizes.h>
#include "btrfs-tests.h"
+#include "../ctree.h"
#include "../extent_io.h"
#define PROCESS_UNLOCK (1 << 0)
return count;
}
-static int test_find_delalloc(void)
+static int test_find_delalloc(u32 sectorsize)
{
struct inode *inode;
struct extent_io_tree tmp;
* |--- delalloc ---|
* |--- search ---|
*/
- set_extent_delalloc(&tmp, 0, 4095, NULL);
+ set_extent_delalloc(&tmp, 0, sectorsize - 1, NULL);
start = 0;
end = 0;
found = find_lock_delalloc_range(inode, &tmp, locked_page, &start,
test_msg("Should have found at least one delalloc\n");
goto out_bits;
}
- if (start != 0 || end != 4095) {
- test_msg("Expected start 0 end 4095, got start %Lu end %Lu\n",
- start, end);
+ if (start != 0 || end != (sectorsize - 1)) {
+ test_msg("Expected start 0 end %u, got start %llu end %llu\n",
+ sectorsize - 1, start, end);
goto out_bits;
}
unlock_extent(&tmp, start, end);
test_msg("Couldn't find the locked page\n");
goto out_bits;
}
- set_extent_delalloc(&tmp, 4096, max_bytes - 1, NULL);
+ set_extent_delalloc(&tmp, sectorsize, max_bytes - 1, NULL);
start = test_start;
end = 0;
found = find_lock_delalloc_range(inode, &tmp, locked_page, &start,
* |--- delalloc ---|
* |--- search ---|
*/
- test_start = max_bytes + 4096;
+ test_start = max_bytes + sectorsize;
locked_page = find_lock_page(inode->i_mapping, test_start >>
PAGE_SHIFT);
if (!locked_page) {
return ret;
}
+/**
+ * test_bit_in_byte - Determine whether a bit is set in a byte
+ * @nr: bit number to test
+ * @addr: Address to start counting from
+ */
+static inline int test_bit_in_byte(int nr, const u8 *addr)
+{
+ return 1UL & (addr[nr / BITS_PER_BYTE] >> (nr & (BITS_PER_BYTE - 1)));
+}
+
static int __test_eb_bitmaps(unsigned long *bitmap, struct extent_buffer *eb,
unsigned long len)
{
return -EINVAL;
}
- bitmap_set(bitmap, (PAGE_SIZE - sizeof(long) / 2) * BITS_PER_BYTE,
- sizeof(long) * BITS_PER_BYTE);
- extent_buffer_bitmap_set(eb, PAGE_SIZE - sizeof(long) / 2, 0,
- sizeof(long) * BITS_PER_BYTE);
- if (memcmp_extent_buffer(eb, bitmap, 0, len) != 0) {
- test_msg("Setting straddling pages failed\n");
- return -EINVAL;
- }
+ /* Straddling pages test */
+ if (len > PAGE_SIZE) {
+ bitmap_set(bitmap,
+ (PAGE_SIZE - sizeof(long) / 2) * BITS_PER_BYTE,
+ sizeof(long) * BITS_PER_BYTE);
+ extent_buffer_bitmap_set(eb, PAGE_SIZE - sizeof(long) / 2, 0,
+ sizeof(long) * BITS_PER_BYTE);
+ if (memcmp_extent_buffer(eb, bitmap, 0, len) != 0) {
+ test_msg("Setting straddling pages failed\n");
+ return -EINVAL;
+ }
- bitmap_set(bitmap, 0, len * BITS_PER_BYTE);
- bitmap_clear(bitmap,
- (PAGE_SIZE - sizeof(long) / 2) * BITS_PER_BYTE,
- sizeof(long) * BITS_PER_BYTE);
- extent_buffer_bitmap_set(eb, 0, 0, len * BITS_PER_BYTE);
- extent_buffer_bitmap_clear(eb, PAGE_SIZE - sizeof(long) / 2, 0,
- sizeof(long) * BITS_PER_BYTE);
- if (memcmp_extent_buffer(eb, bitmap, 0, len) != 0) {
- test_msg("Clearing straddling pages failed\n");
- return -EINVAL;
+ bitmap_set(bitmap, 0, len * BITS_PER_BYTE);
+ bitmap_clear(bitmap,
+ (PAGE_SIZE - sizeof(long) / 2) * BITS_PER_BYTE,
+ sizeof(long) * BITS_PER_BYTE);
+ extent_buffer_bitmap_set(eb, 0, 0, len * BITS_PER_BYTE);
+ extent_buffer_bitmap_clear(eb, PAGE_SIZE - sizeof(long) / 2, 0,
+ sizeof(long) * BITS_PER_BYTE);
+ if (memcmp_extent_buffer(eb, bitmap, 0, len) != 0) {
+ test_msg("Clearing straddling pages failed\n");
+ return -EINVAL;
+ }
}
/*
for (i = 0; i < len * BITS_PER_BYTE; i++) {
int bit, bit1;
- bit = !!test_bit(i, bitmap);
+ bit = !!test_bit_in_byte(i, (u8 *)bitmap);
bit1 = !!extent_buffer_test_bit(eb, 0, i);
if (bit1 != bit) {
test_msg("Testing bit pattern failed\n");
return 0;
}
-static int test_eb_bitmaps(void)
+static int test_eb_bitmaps(u32 sectorsize, u32 nodesize)
{
- unsigned long len = PAGE_SIZE * 4;
+ unsigned long len;
unsigned long *bitmap;
struct extent_buffer *eb;
int ret;
test_msg("Running extent buffer bitmap tests\n");
+ /*
+ * In ppc64, sectorsize can be 64K, thus 4 * 64K will be larger than
+ * BTRFS_MAX_METADATA_BLOCKSIZE.
+ */
+ len = (sectorsize < BTRFS_MAX_METADATA_BLOCKSIZE)
+ ? sectorsize * 4 : sectorsize;
+
bitmap = kmalloc(len, GFP_KERNEL);
if (!bitmap) {
test_msg("Couldn't allocate test bitmap\n");
/* Do it over again with an extent buffer which isn't page-aligned. */
free_extent_buffer(eb);
- eb = __alloc_dummy_extent_buffer(NULL, PAGE_SIZE / 2, len);
+ eb = __alloc_dummy_extent_buffer(NULL, nodesize / 2, len);
if (!eb) {
test_msg("Couldn't allocate test extent buffer\n");
kfree(bitmap);
return ret;
}
-int btrfs_test_extent_io(void)
+int btrfs_test_extent_io(u32 sectorsize, u32 nodesize)
{
int ret;
test_msg("Running extent I/O tests\n");
- ret = test_find_delalloc();
+ ret = test_find_delalloc(sectorsize);
if (ret)
goto out;
- ret = test_eb_bitmaps();
+ ret = test_eb_bitmaps(sectorsize, nodesize);
out:
test_msg("Extent I/O tests finished\n");
return ret;
#include "../disk-io.h"
#include "../free-space-cache.h"
-#define BITS_PER_BITMAP (PAGE_SIZE * 8)
+#define BITS_PER_BITMAP (PAGE_SIZE * 8UL)
/*
* This test just does basic sanity checking, making sure we can add an extent
return 0;
}
-static int test_bitmaps(struct btrfs_block_group_cache *cache)
+static int test_bitmaps(struct btrfs_block_group_cache *cache,
+ u32 sectorsize)
{
u64 next_bitmap_offset;
int ret;
* The first bitmap we have starts at offset 0 so the next one is just
* at the end of the first bitmap.
*/
- next_bitmap_offset = (u64)(BITS_PER_BITMAP * 4096);
+ next_bitmap_offset = (u64)(BITS_PER_BITMAP * sectorsize);
/* Test a bit straddling two bitmaps */
ret = test_add_free_space_entry(cache, next_bitmap_offset - SZ_2M,
}
/* This is the high grade jackassery */
-static int test_bitmaps_and_extents(struct btrfs_block_group_cache *cache)
+static int test_bitmaps_and_extents(struct btrfs_block_group_cache *cache,
+ u32 sectorsize)
{
- u64 bitmap_offset = (u64)(BITS_PER_BITMAP * 4096);
+ u64 bitmap_offset = (u64)(BITS_PER_BITMAP * sectorsize);
int ret;
test_msg("Running bitmap and extent tests\n");
* requests.
*/
static int
-test_steal_space_from_bitmap_to_extent(struct btrfs_block_group_cache *cache)
+test_steal_space_from_bitmap_to_extent(struct btrfs_block_group_cache *cache,
+ u32 sectorsize)
{
int ret;
u64 offset;
* The goal is to test that the bitmap entry space stealing doesn't
* steal this space region.
*/
- ret = btrfs_add_free_space(cache, SZ_128M + SZ_16M, 4096);
+ ret = btrfs_add_free_space(cache, SZ_128M + SZ_16M, sectorsize);
if (ret) {
test_msg("Error adding free space: %d\n", ret);
return ret;
return -ENOENT;
}
- if (cache->free_space_ctl->free_space != (SZ_1M + 4096)) {
- test_msg("Cache free space is not 1Mb + 4Kb\n");
+ if (cache->free_space_ctl->free_space != (SZ_1M + sectorsize)) {
+ test_msg("Cache free space is not 1Mb + %u\n", sectorsize);
return -EINVAL;
}
return -EINVAL;
}
- /* All that remains is a 4Kb free space region in a bitmap. Confirm. */
+ /*
+ * All that remains is a sectorsize free space region in a bitmap.
+ * Confirm.
+ */
ret = check_num_extents_and_bitmaps(cache, 1, 1);
if (ret)
return ret;
- if (cache->free_space_ctl->free_space != 4096) {
- test_msg("Cache free space is not 4Kb\n");
+ if (cache->free_space_ctl->free_space != sectorsize) {
+ test_msg("Cache free space is not %u\n", sectorsize);
return -EINVAL;
}
offset = btrfs_find_space_for_alloc(cache,
- 0, 4096, 0,
+ 0, sectorsize, 0,
&max_extent_size);
if (offset != (SZ_128M + SZ_16M)) {
- test_msg("Failed to allocate 4Kb from space cache, returned offset is: %llu\n",
- offset);
+ test_msg("Failed to allocate %u, returned offset : %llu\n",
+ sectorsize, offset);
return -EINVAL;
}
* The goal is to test that the bitmap entry space stealing doesn't
* steal this space region.
*/
- ret = btrfs_add_free_space(cache, SZ_32M, 8192);
+ ret = btrfs_add_free_space(cache, SZ_32M, 2 * sectorsize);
if (ret) {
test_msg("Error adding free space: %d\n", ret);
return ret;
/*
* Confirm that our extent entry didn't stole all free space from the
- * bitmap, because of the small 8Kb free space region.
+ * bitmap, because of the small 2 * sectorsize free space region.
*/
ret = check_num_extents_and_bitmaps(cache, 2, 1);
if (ret)
return -ENOENT;
}
- if (cache->free_space_ctl->free_space != (SZ_1M + 8192)) {
- test_msg("Cache free space is not 1Mb + 8Kb\n");
+ if (cache->free_space_ctl->free_space != (SZ_1M + 2 * sectorsize)) {
+ test_msg("Cache free space is not 1Mb + %u\n", 2 * sectorsize);
return -EINVAL;
}
return -EINVAL;
}
- /* All that remains is a 8Kb free space region in a bitmap. Confirm. */
+ /*
+ * All that remains is 2 * sectorsize free space region
+ * in a bitmap. Confirm.
+ */
ret = check_num_extents_and_bitmaps(cache, 1, 1);
if (ret)
return ret;
- if (cache->free_space_ctl->free_space != 8192) {
- test_msg("Cache free space is not 8Kb\n");
+ if (cache->free_space_ctl->free_space != 2 * sectorsize) {
+ test_msg("Cache free space is not %u\n", 2 * sectorsize);
return -EINVAL;
}
offset = btrfs_find_space_for_alloc(cache,
- 0, 8192, 0,
+ 0, 2 * sectorsize, 0,
&max_extent_size);
if (offset != SZ_32M) {
- test_msg("Failed to allocate 8Kb from space cache, returned offset is: %llu\n",
+ test_msg("Failed to allocate %u, offset: %llu\n",
+ 2 * sectorsize,
offset);
return -EINVAL;
}
return 0;
}
-int btrfs_test_free_space_cache(void)
+int btrfs_test_free_space_cache(u32 sectorsize, u32 nodesize)
{
struct btrfs_block_group_cache *cache;
struct btrfs_root *root = NULL;
test_msg("Running btrfs free space cache tests\n");
- cache = btrfs_alloc_dummy_block_group(1024 * 1024 * 1024);
+ /*
+ * For ppc64 (with 64k page size), bytes per bitmap might be
+ * larger than 1G. To make bitmap test available in ppc64,
+ * alloc dummy block group whose size cross bitmaps.
+ */
+ cache = btrfs_alloc_dummy_block_group(BITS_PER_BITMAP * sectorsize
+ + PAGE_SIZE, sectorsize);
if (!cache) {
test_msg("Couldn't run the tests\n");
return 0;
}
- root = btrfs_alloc_dummy_root();
+ root = btrfs_alloc_dummy_root(sectorsize, nodesize);
if (IS_ERR(root)) {
ret = PTR_ERR(root);
goto out;
ret = test_extents(cache);
if (ret)
goto out;
- ret = test_bitmaps(cache);
+ ret = test_bitmaps(cache, sectorsize);
if (ret)
goto out;
- ret = test_bitmaps_and_extents(cache);
+ ret = test_bitmaps_and_extents(cache, sectorsize);
if (ret)
goto out;
- ret = test_steal_space_from_bitmap_to_extent(cache);
+ ret = test_steal_space_from_bitmap_to_extent(cache, sectorsize);
out:
btrfs_free_dummy_block_group(cache);
btrfs_free_dummy_root(root);
* Boston, MA 021110-1307, USA.
*/
+#include <linux/types.h>
#include "btrfs-tests.h"
#include "../ctree.h"
#include "../disk-io.h"
* The test cases align their operations to this in order to hit some of the
* edge cases in the bitmap code.
*/
-#define BITMAP_RANGE (BTRFS_FREE_SPACE_BITMAP_BITS * 4096)
+#define BITMAP_RANGE (BTRFS_FREE_SPACE_BITMAP_BITS * PAGE_SIZE)
static int __check_free_space_extents(struct btrfs_trans_handle *trans,
struct btrfs_fs_info *fs_info,
struct btrfs_block_group_cache *,
struct btrfs_path *);
-static int run_test(test_func_t test_func, int bitmaps)
+static int run_test(test_func_t test_func, int bitmaps,
+ u32 sectorsize, u32 nodesize)
{
struct btrfs_root *root = NULL;
struct btrfs_block_group_cache *cache = NULL;
struct btrfs_path *path = NULL;
int ret;
- root = btrfs_alloc_dummy_root();
+ root = btrfs_alloc_dummy_root(sectorsize, nodesize);
if (IS_ERR(root)) {
test_msg("Couldn't allocate dummy root\n");
ret = PTR_ERR(root);
root->fs_info->free_space_root = root;
root->fs_info->tree_root = root;
- root->node = alloc_test_extent_buffer(root->fs_info, 4096);
+ root->node = alloc_test_extent_buffer(root->fs_info,
+ nodesize, nodesize);
if (!root->node) {
test_msg("Couldn't allocate dummy buffer\n");
ret = -ENOMEM;
}
btrfs_set_header_level(root->node, 0);
btrfs_set_header_nritems(root->node, 0);
- root->alloc_bytenr += 8192;
+ root->alloc_bytenr += 2 * nodesize;
- cache = btrfs_alloc_dummy_block_group(8 * BITMAP_RANGE);
+ cache = btrfs_alloc_dummy_block_group(8 * BITMAP_RANGE, sectorsize);
if (!cache) {
test_msg("Couldn't allocate dummy block group cache\n");
ret = -ENOMEM;
return ret;
}
-static int run_test_both_formats(test_func_t test_func)
+static int run_test_both_formats(test_func_t test_func,
+ u32 sectorsize, u32 nodesize)
{
int ret;
- ret = run_test(test_func, 0);
+ ret = run_test(test_func, 0, sectorsize, nodesize);
if (ret)
return ret;
- return run_test(test_func, 1);
+ return run_test(test_func, 1, sectorsize, nodesize);
}
-int btrfs_test_free_space_tree(void)
+int btrfs_test_free_space_tree(u32 sectorsize, u32 nodesize)
{
test_func_t tests[] = {
test_empty_block_group,
test_msg("Running free space tree tests\n");
for (i = 0; i < ARRAY_SIZE(tests); i++) {
- int ret = run_test_both_formats(tests[i]);
+ int ret = run_test_both_formats(tests[i], sectorsize,
+ nodesize);
if (ret) {
- test_msg("%pf failed\n", tests[i]);
+ test_msg("%pf : sectorsize %u failed\n",
+ tests[i], sectorsize);
return ret;
}
}
* Boston, MA 021110-1307, USA.
*/
+#include <linux/types.h>
#include "btrfs-tests.h"
#include "../ctree.h"
#include "../btrfs_inode.h"
* diagram of how the extents will look though this may not be possible we still
* want to make sure everything acts normally (the last number is not inclusive)
*
- * [0 - 5][5 - 6][6 - 10][10 - 4096][ 4096 - 8192 ][8192 - 12288]
- * [hole ][inline][ hole ][ regular ][regular1 split][ hole ]
+ * [0 - 5][5 - 6][ 6 - 4096 ][ 4096 - 4100][4100 - 8195][8195 - 12291]
+ * [hole ][inline][hole but no extent][ hole ][ regular ][regular1 split]
*
- * [ 12288 - 20480][20480 - 24576][ 24576 - 28672 ][28672 - 36864][36864 - 45056]
- * [regular1 split][ prealloc1 ][prealloc1 written][ prealloc1 ][ compressed ]
+ * [12291 - 16387][16387 - 24579][24579 - 28675][ 28675 - 32771][32771 - 36867 ]
+ * [ hole ][regular1 split][ prealloc ][ prealloc1 ][prealloc1 written]
*
- * [45056 - 49152][49152-53248][53248-61440][61440-65536][ 65536+81920 ]
- * [ compressed1 ][ regular ][compressed1][ regular ][ hole but no extent]
+ * [36867 - 45059][45059 - 53251][53251 - 57347][57347 - 61443][61443- 69635]
+ * [ prealloc1 ][ compressed ][ compressed1 ][ regular ][ compressed1]
*
- * [81920-86016]
- * [ regular ]
+ * [69635-73731][ 73731 - 86019 ][86019-90115]
+ * [ regular ][ hole but no extent][ regular ]
*/
-static void setup_file_extents(struct btrfs_root *root)
+static void setup_file_extents(struct btrfs_root *root, u32 sectorsize)
{
int slot = 0;
u64 disk_bytenr = SZ_1M;
insert_extent(root, offset, 1, 1, 0, 0, 0, BTRFS_FILE_EXTENT_INLINE, 0,
slot);
slot++;
- offset = 4096;
+ offset = sectorsize;
/* Now another hole */
insert_extent(root, offset, 4, 4, 0, 0, 0, BTRFS_FILE_EXTENT_REG, 0,
offset += 4;
/* Now for a regular extent */
- insert_extent(root, offset, 4095, 4095, 0, disk_bytenr, 4096,
- BTRFS_FILE_EXTENT_REG, 0, slot);
+ insert_extent(root, offset, sectorsize - 1, sectorsize - 1, 0,
+ disk_bytenr, sectorsize, BTRFS_FILE_EXTENT_REG, 0, slot);
slot++;
- disk_bytenr += 4096;
- offset += 4095;
+ disk_bytenr += sectorsize;
+ offset += sectorsize - 1;
/*
* Now for 3 extents that were split from a hole punch so we test
* offsets properly.
*/
- insert_extent(root, offset, 4096, 16384, 0, disk_bytenr, 16384,
- BTRFS_FILE_EXTENT_REG, 0, slot);
+ insert_extent(root, offset, sectorsize, 4 * sectorsize, 0, disk_bytenr,
+ 4 * sectorsize, BTRFS_FILE_EXTENT_REG, 0, slot);
slot++;
- offset += 4096;
- insert_extent(root, offset, 4096, 4096, 0, 0, 0, BTRFS_FILE_EXTENT_REG,
- 0, slot);
+ offset += sectorsize;
+ insert_extent(root, offset, sectorsize, sectorsize, 0, 0, 0,
+ BTRFS_FILE_EXTENT_REG, 0, slot);
slot++;
- offset += 4096;
- insert_extent(root, offset, 8192, 16384, 8192, disk_bytenr, 16384,
+ offset += sectorsize;
+ insert_extent(root, offset, 2 * sectorsize, 4 * sectorsize,
+ 2 * sectorsize, disk_bytenr, 4 * sectorsize,
BTRFS_FILE_EXTENT_REG, 0, slot);
slot++;
- offset += 8192;
- disk_bytenr += 16384;
+ offset += 2 * sectorsize;
+ disk_bytenr += 4 * sectorsize;
/* Now for a unwritten prealloc extent */
- insert_extent(root, offset, 4096, 4096, 0, disk_bytenr, 4096,
- BTRFS_FILE_EXTENT_PREALLOC, 0, slot);
+ insert_extent(root, offset, sectorsize, sectorsize, 0, disk_bytenr,
+ sectorsize, BTRFS_FILE_EXTENT_PREALLOC, 0, slot);
slot++;
- offset += 4096;
+ offset += sectorsize;
/*
* We want to jack up disk_bytenr a little more so the em stuff doesn't
* merge our records.
*/
- disk_bytenr += 8192;
+ disk_bytenr += 2 * sectorsize;
/*
* Now for a partially written prealloc extent, basically the same as
* the hole punch example above. Ram_bytes never changes when you mark
* extents written btw.
*/
- insert_extent(root, offset, 4096, 16384, 0, disk_bytenr, 16384,
- BTRFS_FILE_EXTENT_PREALLOC, 0, slot);
+ insert_extent(root, offset, sectorsize, 4 * sectorsize, 0, disk_bytenr,
+ 4 * sectorsize, BTRFS_FILE_EXTENT_PREALLOC, 0, slot);
slot++;
- offset += 4096;
- insert_extent(root, offset, 4096, 16384, 4096, disk_bytenr, 16384,
- BTRFS_FILE_EXTENT_REG, 0, slot);
+ offset += sectorsize;
+ insert_extent(root, offset, sectorsize, 4 * sectorsize, sectorsize,
+ disk_bytenr, 4 * sectorsize, BTRFS_FILE_EXTENT_REG, 0,
+ slot);
slot++;
- offset += 4096;
- insert_extent(root, offset, 8192, 16384, 8192, disk_bytenr, 16384,
+ offset += sectorsize;
+ insert_extent(root, offset, 2 * sectorsize, 4 * sectorsize,
+ 2 * sectorsize, disk_bytenr, 4 * sectorsize,
BTRFS_FILE_EXTENT_PREALLOC, 0, slot);
slot++;
- offset += 8192;
- disk_bytenr += 16384;
+ offset += 2 * sectorsize;
+ disk_bytenr += 4 * sectorsize;
/* Now a normal compressed extent */
- insert_extent(root, offset, 8192, 8192, 0, disk_bytenr, 4096,
- BTRFS_FILE_EXTENT_REG, BTRFS_COMPRESS_ZLIB, slot);
+ insert_extent(root, offset, 2 * sectorsize, 2 * sectorsize, 0,
+ disk_bytenr, sectorsize, BTRFS_FILE_EXTENT_REG,
+ BTRFS_COMPRESS_ZLIB, slot);
slot++;
- offset += 8192;
+ offset += 2 * sectorsize;
/* No merges */
- disk_bytenr += 8192;
+ disk_bytenr += 2 * sectorsize;
/* Now a split compressed extent */
- insert_extent(root, offset, 4096, 16384, 0, disk_bytenr, 4096,
- BTRFS_FILE_EXTENT_REG, BTRFS_COMPRESS_ZLIB, slot);
+ insert_extent(root, offset, sectorsize, 4 * sectorsize, 0, disk_bytenr,
+ sectorsize, BTRFS_FILE_EXTENT_REG,
+ BTRFS_COMPRESS_ZLIB, slot);
slot++;
- offset += 4096;
- insert_extent(root, offset, 4096, 4096, 0, disk_bytenr + 4096, 4096,
+ offset += sectorsize;
+ insert_extent(root, offset, sectorsize, sectorsize, 0,
+ disk_bytenr + sectorsize, sectorsize,
BTRFS_FILE_EXTENT_REG, 0, slot);
slot++;
- offset += 4096;
- insert_extent(root, offset, 8192, 16384, 8192, disk_bytenr, 4096,
+ offset += sectorsize;
+ insert_extent(root, offset, 2 * sectorsize, 4 * sectorsize,
+ 2 * sectorsize, disk_bytenr, sectorsize,
BTRFS_FILE_EXTENT_REG, BTRFS_COMPRESS_ZLIB, slot);
slot++;
- offset += 8192;
- disk_bytenr += 8192;
+ offset += 2 * sectorsize;
+ disk_bytenr += 2 * sectorsize;
/* Now extents that have a hole but no hole extent */
- insert_extent(root, offset, 4096, 4096, 0, disk_bytenr, 4096,
- BTRFS_FILE_EXTENT_REG, 0, slot);
+ insert_extent(root, offset, sectorsize, sectorsize, 0, disk_bytenr,
+ sectorsize, BTRFS_FILE_EXTENT_REG, 0, slot);
slot++;
- offset += 16384;
- disk_bytenr += 4096;
- insert_extent(root, offset, 4096, 4096, 0, disk_bytenr, 4096,
- BTRFS_FILE_EXTENT_REG, 0, slot);
+ offset += 4 * sectorsize;
+ disk_bytenr += sectorsize;
+ insert_extent(root, offset, sectorsize, sectorsize, 0, disk_bytenr,
+ sectorsize, BTRFS_FILE_EXTENT_REG, 0, slot);
}
static unsigned long prealloc_only = 0;
static unsigned long compressed_only = 0;
static unsigned long vacancy_only = 0;
-static noinline int test_btrfs_get_extent(void)
+static noinline int test_btrfs_get_extent(u32 sectorsize, u32 nodesize)
{
struct inode *inode = NULL;
struct btrfs_root *root = NULL;
BTRFS_I(inode)->location.objectid = BTRFS_FIRST_FREE_OBJECTID;
BTRFS_I(inode)->location.offset = 0;
- root = btrfs_alloc_dummy_root();
+ root = btrfs_alloc_dummy_root(sectorsize, nodesize);
if (IS_ERR(root)) {
test_msg("Couldn't allocate root\n");
goto out;
goto out;
}
- root->node = alloc_dummy_extent_buffer(NULL, 4096);
+ root->node = alloc_dummy_extent_buffer(NULL, nodesize, nodesize);
if (!root->node) {
test_msg("Couldn't allocate dummy buffer\n");
goto out;
/* First with no extents */
BTRFS_I(inode)->root = root;
- em = btrfs_get_extent(inode, NULL, 0, 0, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, 0, sectorsize, 0);
if (IS_ERR(em)) {
em = NULL;
test_msg("Got an error when we shouldn't have\n");
* setup_file_extents, so if you change anything there you need to
* update the comment and update the expected values below.
*/
- setup_file_extents(root);
+ setup_file_extents(root, sectorsize);
em = btrfs_get_extent(inode, NULL, 0, 0, (u64)-1, 0);
if (IS_ERR(em)) {
offset = em->start + em->len;
free_extent_map(em);
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected an inline, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 4091) {
+
+ if (em->start != offset || em->len != (sectorsize - 5)) {
test_msg("Unexpected extent wanted start %llu len 1, got start "
"%llu len %llu\n", offset, em->start, em->len);
goto out;
offset = em->start + em->len;
free_extent_map(em);
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
free_extent_map(em);
/* Regular extent */
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 4095) {
+ if (em->start != offset || em->len != sectorsize - 1) {
test_msg("Unexpected extent wanted start %llu len 4095, got "
"start %llu len %llu\n", offset, em->start, em->len);
goto out;
free_extent_map(em);
/* The next 3 are split extents */
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 4096) {
- test_msg("Unexpected extent wanted start %llu len 4096, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != sectorsize) {
+ test_msg("Unexpected extent start %llu len %u, "
+ "got start %llu len %llu\n",
+ offset, sectorsize, em->start, em->len);
goto out;
}
if (em->flags != 0) {
offset = em->start + em->len;
free_extent_map(em);
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a hole, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 4096) {
- test_msg("Unexpected extent wanted start %llu len 4096, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u, "
+ "got start %llu len %llu\n",
+ offset, sectorsize, em->start, em->len);
goto out;
}
if (em->flags != 0) {
offset = em->start + em->len;
free_extent_map(em);
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 8192) {
- test_msg("Unexpected extent wanted start %llu len 8192, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != 2 * sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u, "
+ "got start %llu len %llu\n",
+ offset, 2 * sectorsize, em->start, em->len);
goto out;
}
if (em->flags != 0) {
free_extent_map(em);
/* Prealloc extent */
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 4096) {
- test_msg("Unexpected extent wanted start %llu len 4096, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u, "
+ "got start %llu len %llu\n",
+ offset, sectorsize, em->start, em->len);
goto out;
}
if (em->flags != prealloc_only) {
free_extent_map(em);
/* The next 3 are a half written prealloc extent */
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 4096) {
- test_msg("Unexpected extent wanted start %llu len 4096, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u, "
+ "got start %llu len %llu\n",
+ offset, sectorsize, em->start, em->len);
goto out;
}
if (em->flags != prealloc_only) {
offset = em->start + em->len;
free_extent_map(em);
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 4096) {
- test_msg("Unexpected extent wanted start %llu len 4096, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u, "
+ "got start %llu len %llu\n",
+ offset, sectorsize, em->start, em->len);
goto out;
}
if (em->flags != 0) {
offset = em->start + em->len;
free_extent_map(em);
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 8192) {
- test_msg("Unexpected extent wanted start %llu len 8192, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != 2 * sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u, "
+ "got start %llu len %llu\n",
+ offset, 2 * sectorsize, em->start, em->len);
goto out;
}
if (em->flags != prealloc_only) {
free_extent_map(em);
/* Now for the compressed extent */
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 8192) {
- test_msg("Unexpected extent wanted start %llu len 8192, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != 2 * sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u,"
+ "got start %llu len %llu\n",
+ offset, 2 * sectorsize, em->start, em->len);
goto out;
}
if (em->flags != compressed_only) {
free_extent_map(em);
/* Split compressed extent */
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 4096) {
- test_msg("Unexpected extent wanted start %llu len 4096, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u,"
+ "got start %llu len %llu\n",
+ offset, sectorsize, em->start, em->len);
goto out;
}
if (em->flags != compressed_only) {
offset = em->start + em->len;
free_extent_map(em);
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 4096) {
- test_msg("Unexpected extent wanted start %llu len 4096, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u, "
+ "got start %llu len %llu\n",
+ offset, sectorsize, em->start, em->len);
goto out;
}
if (em->flags != 0) {
offset = em->start + em->len;
free_extent_map(em);
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
disk_bytenr, em->block_start);
goto out;
}
- if (em->start != offset || em->len != 8192) {
- test_msg("Unexpected extent wanted start %llu len 8192, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != 2 * sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u, "
+ "got start %llu len %llu\n",
+ offset, 2 * sectorsize, em->start, em->len);
goto out;
}
if (em->flags != compressed_only) {
free_extent_map(em);
/* A hole between regular extents but no hole extent */
- em = btrfs_get_extent(inode, NULL, 0, offset + 6, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset + 6, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 4096) {
- test_msg("Unexpected extent wanted start %llu len 4096, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u, "
+ "got start %llu len %llu\n",
+ offset, sectorsize, em->start, em->len);
goto out;
}
if (em->flags != 0) {
* length of the actual hole, if this changes we'll have to change this
* test.
*/
- if (em->start != offset || em->len != 12288) {
- test_msg("Unexpected extent wanted start %llu len 12288, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != 3 * sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u, "
+ "got start %llu len %llu\n",
+ offset, 3 * sectorsize, em->start, em->len);
goto out;
}
if (em->flags != vacancy_only) {
offset = em->start + em->len;
free_extent_map(em);
- em = btrfs_get_extent(inode, NULL, 0, offset, 4096, 0);
+ em = btrfs_get_extent(inode, NULL, 0, offset, sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != offset || em->len != 4096) {
- test_msg("Unexpected extent wanted start %llu len 4096, got "
- "start %llu len %llu\n", offset, em->start, em->len);
+ if (em->start != offset || em->len != sectorsize) {
+ test_msg("Unexpected extent wanted start %llu len %u,"
+ "got start %llu len %llu\n",
+ offset, sectorsize, em->start, em->len);
goto out;
}
if (em->flags != 0) {
return ret;
}
-static int test_hole_first(void)
+static int test_hole_first(u32 sectorsize, u32 nodesize)
{
struct inode *inode = NULL;
struct btrfs_root *root = NULL;
BTRFS_I(inode)->location.objectid = BTRFS_FIRST_FREE_OBJECTID;
BTRFS_I(inode)->location.offset = 0;
- root = btrfs_alloc_dummy_root();
+ root = btrfs_alloc_dummy_root(sectorsize, nodesize);
if (IS_ERR(root)) {
test_msg("Couldn't allocate root\n");
goto out;
goto out;
}
- root->node = alloc_dummy_extent_buffer(NULL, 4096);
+ root->node = alloc_dummy_extent_buffer(NULL, nodesize, nodesize);
if (!root->node) {
test_msg("Couldn't allocate dummy buffer\n");
goto out;
* btrfs_get_extent.
*/
insert_inode_item_key(root);
- insert_extent(root, 4096, 4096, 4096, 0, 4096, 4096,
- BTRFS_FILE_EXTENT_REG, 0, 1);
- em = btrfs_get_extent(inode, NULL, 0, 0, 8192, 0);
+ insert_extent(root, sectorsize, sectorsize, sectorsize, 0, sectorsize,
+ sectorsize, BTRFS_FILE_EXTENT_REG, 0, 1);
+ em = btrfs_get_extent(inode, NULL, 0, 0, 2 * sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
test_msg("Expected a hole, got %llu\n", em->block_start);
goto out;
}
- if (em->start != 0 || em->len != 4096) {
- test_msg("Unexpected extent wanted start 0 len 4096, got start "
- "%llu len %llu\n", em->start, em->len);
+ if (em->start != 0 || em->len != sectorsize) {
+ test_msg("Unexpected extent wanted start 0 len %u, "
+ "got start %llu len %llu\n",
+ sectorsize, em->start, em->len);
goto out;
}
if (em->flags != vacancy_only) {
}
free_extent_map(em);
- em = btrfs_get_extent(inode, NULL, 0, 4096, 8192, 0);
+ em = btrfs_get_extent(inode, NULL, 0, sectorsize, 2 * sectorsize, 0);
if (IS_ERR(em)) {
test_msg("Got an error when we shouldn't have\n");
goto out;
}
- if (em->block_start != 4096) {
+ if (em->block_start != sectorsize) {
test_msg("Expected a real extent, got %llu\n", em->block_start);
goto out;
}
- if (em->start != 4096 || em->len != 4096) {
- test_msg("Unexpected extent wanted start 4096 len 4096, got "
- "start %llu len %llu\n", em->start, em->len);
+ if (em->start != sectorsize || em->len != sectorsize) {
+ test_msg("Unexpected extent wanted start %u len %u, "
+ "got start %llu len %llu\n",
+ sectorsize, sectorsize, em->start, em->len);
goto out;
}
if (em->flags != 0) {
return ret;
}
-static int test_extent_accounting(void)
+static int test_extent_accounting(u32 sectorsize, u32 nodesize)
{
struct inode *inode = NULL;
struct btrfs_root *root = NULL;
return ret;
}
- root = btrfs_alloc_dummy_root();
+ root = btrfs_alloc_dummy_root(sectorsize, nodesize);
if (IS_ERR(root)) {
test_msg("Couldn't allocate root\n");
goto out;
goto out;
}
- /* [BTRFS_MAX_EXTENT_SIZE][4k] */
+ /* [BTRFS_MAX_EXTENT_SIZE][sectorsize] */
BTRFS_I(inode)->outstanding_extents++;
ret = btrfs_set_extent_delalloc(inode, BTRFS_MAX_EXTENT_SIZE,
- BTRFS_MAX_EXTENT_SIZE + 4095, NULL);
+ BTRFS_MAX_EXTENT_SIZE + sectorsize - 1,
+ NULL);
if (ret) {
test_msg("btrfs_set_extent_delalloc returned %d\n", ret);
goto out;
goto out;
}
- /* [BTRFS_MAX_EXTENT_SIZE/2][4K HOLE][the rest] */
+ /* [BTRFS_MAX_EXTENT_SIZE/2][sectorsize HOLE][the rest] */
ret = clear_extent_bit(&BTRFS_I(inode)->io_tree,
BTRFS_MAX_EXTENT_SIZE >> 1,
- (BTRFS_MAX_EXTENT_SIZE >> 1) + 4095,
+ (BTRFS_MAX_EXTENT_SIZE >> 1) + sectorsize - 1,
EXTENT_DELALLOC | EXTENT_DIRTY |
EXTENT_UPTODATE | EXTENT_DO_ACCOUNTING, 0, 0,
NULL, GFP_KERNEL);
goto out;
}
- /* [BTRFS_MAX_EXTENT_SIZE][4K] */
+ /* [BTRFS_MAX_EXTENT_SIZE][sectorsize] */
BTRFS_I(inode)->outstanding_extents++;
ret = btrfs_set_extent_delalloc(inode, BTRFS_MAX_EXTENT_SIZE >> 1,
- (BTRFS_MAX_EXTENT_SIZE >> 1) + 4095,
+ (BTRFS_MAX_EXTENT_SIZE >> 1)
+ + sectorsize - 1,
NULL);
if (ret) {
test_msg("btrfs_set_extent_delalloc returned %d\n", ret);
}
/*
- * [BTRFS_MAX_EXTENT_SIZE+4K][4K HOLE][BTRFS_MAX_EXTENT_SIZE+4K]
+ * [BTRFS_MAX_EXTENT_SIZE+sectorsize][sectorsize HOLE][BTRFS_MAX_EXTENT_SIZE+sectorsize]
*
* I'm artificially adding 2 to outstanding_extents because in the
* buffered IO case we'd add things up as we go, but I don't feel like
* doing that here, this isn't the interesting case we want to test.
*/
BTRFS_I(inode)->outstanding_extents += 2;
- ret = btrfs_set_extent_delalloc(inode, BTRFS_MAX_EXTENT_SIZE + 8192,
- (BTRFS_MAX_EXTENT_SIZE << 1) + 12287,
- NULL);
+ ret = btrfs_set_extent_delalloc(inode,
+ BTRFS_MAX_EXTENT_SIZE + 2 * sectorsize,
+ (BTRFS_MAX_EXTENT_SIZE << 1) + 3 * sectorsize - 1,
+ NULL);
if (ret) {
test_msg("btrfs_set_extent_delalloc returned %d\n", ret);
goto out;
goto out;
}
- /* [BTRFS_MAX_EXTENT_SIZE+4k][4k][BTRFS_MAX_EXTENT_SIZE+4k] */
+ /*
+ * [BTRFS_MAX_EXTENT_SIZE+sectorsize][sectorsize][BTRFS_MAX_EXTENT_SIZE+sectorsize]
+ */
BTRFS_I(inode)->outstanding_extents++;
- ret = btrfs_set_extent_delalloc(inode, BTRFS_MAX_EXTENT_SIZE+4096,
- BTRFS_MAX_EXTENT_SIZE+8191, NULL);
+ ret = btrfs_set_extent_delalloc(inode,
+ BTRFS_MAX_EXTENT_SIZE + sectorsize,
+ BTRFS_MAX_EXTENT_SIZE + 2 * sectorsize - 1, NULL);
if (ret) {
test_msg("btrfs_set_extent_delalloc returned %d\n", ret);
goto out;
/* [BTRFS_MAX_EXTENT_SIZE+4k][4K HOLE][BTRFS_MAX_EXTENT_SIZE+4k] */
ret = clear_extent_bit(&BTRFS_I(inode)->io_tree,
- BTRFS_MAX_EXTENT_SIZE+4096,
- BTRFS_MAX_EXTENT_SIZE+8191,
+ BTRFS_MAX_EXTENT_SIZE + sectorsize,
+ BTRFS_MAX_EXTENT_SIZE + 2 * sectorsize - 1,
EXTENT_DIRTY | EXTENT_DELALLOC |
EXTENT_DO_ACCOUNTING | EXTENT_UPTODATE, 0, 0,
NULL, GFP_KERNEL);
* might fail and I'd rather satisfy my paranoia at this point.
*/
BTRFS_I(inode)->outstanding_extents++;
- ret = btrfs_set_extent_delalloc(inode, BTRFS_MAX_EXTENT_SIZE+4096,
- BTRFS_MAX_EXTENT_SIZE+8191, NULL);
+ ret = btrfs_set_extent_delalloc(inode,
+ BTRFS_MAX_EXTENT_SIZE + sectorsize,
+ BTRFS_MAX_EXTENT_SIZE + 2 * sectorsize - 1, NULL);
if (ret) {
test_msg("btrfs_set_extent_delalloc returned %d\n", ret);
goto out;
return ret;
}
-int btrfs_test_inodes(void)
+int btrfs_test_inodes(u32 sectorsize, u32 nodesize)
{
int ret;
set_bit(EXTENT_FLAG_PREALLOC, &prealloc_only);
test_msg("Running btrfs_get_extent tests\n");
- ret = test_btrfs_get_extent();
+ ret = test_btrfs_get_extent(sectorsize, nodesize);
if (ret)
return ret;
test_msg("Running hole first btrfs_get_extent test\n");
- ret = test_hole_first();
+ ret = test_hole_first(sectorsize, nodesize);
if (ret)
return ret;
test_msg("Running outstanding_extents tests\n");
- return test_extent_accounting();
+ return test_extent_accounting(sectorsize, nodesize);
}
* Boston, MA 021110-1307, USA.
*/
+#include <linux/types.h>
#include "btrfs-tests.h"
#include "../ctree.h"
#include "../transaction.h"
return ret;
}
-static int test_no_shared_qgroup(struct btrfs_root *root)
+static int test_no_shared_qgroup(struct btrfs_root *root,
+ u32 sectorsize, u32 nodesize)
{
struct btrfs_trans_handle trans;
struct btrfs_fs_info *fs_info = root->fs_info;
btrfs_init_dummy_trans(&trans);
test_msg("Qgroup basic add\n");
- ret = btrfs_create_qgroup(NULL, fs_info, 5);
+ ret = btrfs_create_qgroup(NULL, fs_info, BTRFS_FS_TREE_OBJECTID);
if (ret) {
test_msg("Couldn't create a qgroup %d\n", ret);
return ret;
* we can only call btrfs_qgroup_account_extent() directly to test
* quota.
*/
- ret = btrfs_find_all_roots(&trans, fs_info, 4096, 0, &old_roots);
+ ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &old_roots);
if (ret) {
ulist_free(old_roots);
test_msg("Couldn't find old roots: %d\n", ret);
return ret;
}
- ret = insert_normal_tree_ref(root, 4096, 4096, 0, 5);
+ ret = insert_normal_tree_ref(root, nodesize, nodesize, 0,
+ BTRFS_FS_TREE_OBJECTID);
if (ret)
return ret;
- ret = btrfs_find_all_roots(&trans, fs_info, 4096, 0, &new_roots);
+ ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &new_roots);
if (ret) {
ulist_free(old_roots);
ulist_free(new_roots);
return ret;
}
- ret = btrfs_qgroup_account_extent(&trans, fs_info, 4096, 4096,
- old_roots, new_roots);
+ ret = btrfs_qgroup_account_extent(&trans, fs_info, nodesize,
+ nodesize, old_roots, new_roots);
if (ret) {
test_msg("Couldn't account space for a qgroup %d\n", ret);
return ret;
}
- if (btrfs_verify_qgroup_counts(fs_info, 5, 4096, 4096)) {
+ if (btrfs_verify_qgroup_counts(fs_info, BTRFS_FS_TREE_OBJECTID,
+ nodesize, nodesize)) {
test_msg("Qgroup counts didn't match expected values\n");
return -EINVAL;
}
old_roots = NULL;
new_roots = NULL;
- ret = btrfs_find_all_roots(&trans, fs_info, 4096, 0, &old_roots);
+ ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &old_roots);
if (ret) {
ulist_free(old_roots);
test_msg("Couldn't find old roots: %d\n", ret);
return ret;
}
- ret = remove_extent_item(root, 4096, 4096);
+ ret = remove_extent_item(root, nodesize, nodesize);
if (ret)
return -EINVAL;
- ret = btrfs_find_all_roots(&trans, fs_info, 4096, 0, &new_roots);
+ ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &new_roots);
if (ret) {
ulist_free(old_roots);
ulist_free(new_roots);
return ret;
}
- ret = btrfs_qgroup_account_extent(&trans, fs_info, 4096, 4096,
- old_roots, new_roots);
+ ret = btrfs_qgroup_account_extent(&trans, fs_info, nodesize,
+ nodesize, old_roots, new_roots);
if (ret) {
test_msg("Couldn't account space for a qgroup %d\n", ret);
return -EINVAL;
}
- if (btrfs_verify_qgroup_counts(fs_info, 5, 0, 0)) {
+ if (btrfs_verify_qgroup_counts(fs_info, BTRFS_FS_TREE_OBJECTID, 0, 0)) {
test_msg("Qgroup counts didn't match expected values\n");
return -EINVAL;
}
* right, also remove one of the roots and make sure the exclusive count is
* adjusted properly.
*/
-static int test_multiple_refs(struct btrfs_root *root)
+static int test_multiple_refs(struct btrfs_root *root,
+ u32 sectorsize, u32 nodesize)
{
struct btrfs_trans_handle trans;
struct btrfs_fs_info *fs_info = root->fs_info;
test_msg("Qgroup multiple refs test\n");
- /* We have 5 created already from the previous test */
- ret = btrfs_create_qgroup(NULL, fs_info, 256);
+ /*
+ * We have BTRFS_FS_TREE_OBJECTID created already from the
+ * previous test.
+ */
+ ret = btrfs_create_qgroup(NULL, fs_info, BTRFS_FIRST_FREE_OBJECTID);
if (ret) {
test_msg("Couldn't create a qgroup %d\n", ret);
return ret;
}
- ret = btrfs_find_all_roots(&trans, fs_info, 4096, 0, &old_roots);
+ ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &old_roots);
if (ret) {
ulist_free(old_roots);
test_msg("Couldn't find old roots: %d\n", ret);
return ret;
}
- ret = insert_normal_tree_ref(root, 4096, 4096, 0, 5);
+ ret = insert_normal_tree_ref(root, nodesize, nodesize, 0,
+ BTRFS_FS_TREE_OBJECTID);
if (ret)
return ret;
- ret = btrfs_find_all_roots(&trans, fs_info, 4096, 0, &new_roots);
+ ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &new_roots);
if (ret) {
ulist_free(old_roots);
ulist_free(new_roots);
return ret;
}
- ret = btrfs_qgroup_account_extent(&trans, fs_info, 4096, 4096,
- old_roots, new_roots);
+ ret = btrfs_qgroup_account_extent(&trans, fs_info, nodesize,
+ nodesize, old_roots, new_roots);
if (ret) {
test_msg("Couldn't account space for a qgroup %d\n", ret);
return ret;
}
- if (btrfs_verify_qgroup_counts(fs_info, 5, 4096, 4096)) {
+ if (btrfs_verify_qgroup_counts(fs_info, BTRFS_FS_TREE_OBJECTID,
+ nodesize, nodesize)) {
test_msg("Qgroup counts didn't match expected values\n");
return -EINVAL;
}
- ret = btrfs_find_all_roots(&trans, fs_info, 4096, 0, &old_roots);
+ ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &old_roots);
if (ret) {
ulist_free(old_roots);
test_msg("Couldn't find old roots: %d\n", ret);
return ret;
}
- ret = add_tree_ref(root, 4096, 4096, 0, 256);
+ ret = add_tree_ref(root, nodesize, nodesize, 0,
+ BTRFS_FIRST_FREE_OBJECTID);
if (ret)
return ret;
- ret = btrfs_find_all_roots(&trans, fs_info, 4096, 0, &new_roots);
+ ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &new_roots);
if (ret) {
ulist_free(old_roots);
ulist_free(new_roots);
return ret;
}
- ret = btrfs_qgroup_account_extent(&trans, fs_info, 4096, 4096,
- old_roots, new_roots);
+ ret = btrfs_qgroup_account_extent(&trans, fs_info, nodesize,
+ nodesize, old_roots, new_roots);
if (ret) {
test_msg("Couldn't account space for a qgroup %d\n", ret);
return ret;
}
- if (btrfs_verify_qgroup_counts(fs_info, 5, 4096, 0)) {
+ if (btrfs_verify_qgroup_counts(fs_info, BTRFS_FS_TREE_OBJECTID,
+ nodesize, 0)) {
test_msg("Qgroup counts didn't match expected values\n");
return -EINVAL;
}
- if (btrfs_verify_qgroup_counts(fs_info, 256, 4096, 0)) {
+ if (btrfs_verify_qgroup_counts(fs_info, BTRFS_FIRST_FREE_OBJECTID,
+ nodesize, 0)) {
test_msg("Qgroup counts didn't match expected values\n");
return -EINVAL;
}
- ret = btrfs_find_all_roots(&trans, fs_info, 4096, 0, &old_roots);
+ ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &old_roots);
if (ret) {
ulist_free(old_roots);
test_msg("Couldn't find old roots: %d\n", ret);
return ret;
}
- ret = remove_extent_ref(root, 4096, 4096, 0, 256);
+ ret = remove_extent_ref(root, nodesize, nodesize, 0,
+ BTRFS_FIRST_FREE_OBJECTID);
if (ret)
return ret;
- ret = btrfs_find_all_roots(&trans, fs_info, 4096, 0, &new_roots);
+ ret = btrfs_find_all_roots(&trans, fs_info, nodesize, 0, &new_roots);
if (ret) {
ulist_free(old_roots);
ulist_free(new_roots);
return ret;
}
- ret = btrfs_qgroup_account_extent(&trans, fs_info, 4096, 4096,
- old_roots, new_roots);
+ ret = btrfs_qgroup_account_extent(&trans, fs_info, nodesize,
+ nodesize, old_roots, new_roots);
if (ret) {
test_msg("Couldn't account space for a qgroup %d\n", ret);
return ret;
}
- if (btrfs_verify_qgroup_counts(fs_info, 256, 0, 0)) {
+ if (btrfs_verify_qgroup_counts(fs_info, BTRFS_FIRST_FREE_OBJECTID,
+ 0, 0)) {
test_msg("Qgroup counts didn't match expected values\n");
return -EINVAL;
}
- if (btrfs_verify_qgroup_counts(fs_info, 5, 4096, 4096)) {
+ if (btrfs_verify_qgroup_counts(fs_info, BTRFS_FS_TREE_OBJECTID,
+ nodesize, nodesize)) {
test_msg("Qgroup counts didn't match expected values\n");
return -EINVAL;
}
return 0;
}
-int btrfs_test_qgroups(void)
+int btrfs_test_qgroups(u32 sectorsize, u32 nodesize)
{
struct btrfs_root *root;
struct btrfs_root *tmp_root;
int ret = 0;
- root = btrfs_alloc_dummy_root();
+ root = btrfs_alloc_dummy_root(sectorsize, nodesize);
if (IS_ERR(root)) {
test_msg("Couldn't allocate root\n");
return PTR_ERR(root);
* Can't use bytenr 0, some things freak out
* *cough*backref walking code*cough*
*/
- root->node = alloc_test_extent_buffer(root->fs_info, 4096);
+ root->node = alloc_test_extent_buffer(root->fs_info, nodesize,
+ nodesize);
if (!root->node) {
test_msg("Couldn't allocate dummy buffer\n");
ret = -ENOMEM;
}
btrfs_set_header_level(root->node, 0);
btrfs_set_header_nritems(root->node, 0);
- root->alloc_bytenr += 8192;
+ root->alloc_bytenr += 2 * nodesize;
- tmp_root = btrfs_alloc_dummy_root();
+ tmp_root = btrfs_alloc_dummy_root(sectorsize, nodesize);
if (IS_ERR(tmp_root)) {
test_msg("Couldn't allocate a fs root\n");
ret = PTR_ERR(tmp_root);
goto out;
}
- tmp_root->root_key.objectid = 5;
+ tmp_root->root_key.objectid = BTRFS_FS_TREE_OBJECTID;
root->fs_info->fs_root = tmp_root;
ret = btrfs_insert_fs_root(root->fs_info, tmp_root);
if (ret) {
goto out;
}
- tmp_root = btrfs_alloc_dummy_root();
+ tmp_root = btrfs_alloc_dummy_root(sectorsize, nodesize);
if (IS_ERR(tmp_root)) {
test_msg("Couldn't allocate a fs root\n");
ret = PTR_ERR(tmp_root);
goto out;
}
- tmp_root->root_key.objectid = 256;
+ tmp_root->root_key.objectid = BTRFS_FIRST_FREE_OBJECTID;
ret = btrfs_insert_fs_root(root->fs_info, tmp_root);
if (ret) {
test_msg("Couldn't insert fs root %d\n", ret);
}
test_msg("Running qgroup tests\n");
- ret = test_no_shared_qgroup(root);
+ ret = test_no_shared_qgroup(root, sectorsize, nodesize);
if (ret)
goto out;
- ret = test_multiple_refs(root);
+ ret = test_multiple_refs(root, sectorsize, nodesize);
out:
btrfs_free_dummy_root(root);
return ret;
u64 dev_extent_len = 0;
u64 chunk_objectid = BTRFS_FIRST_CHUNK_TREE_OBJECTID;
int i, ret = 0;
+ struct btrfs_fs_devices *fs_devices = root->fs_info->fs_devices;
/* Just in case */
root = root->fs_info->chunk_root;
check_system_chunk(trans, extent_root, map->type);
unlock_chunks(root->fs_info->chunk_root);
+ /*
+ * Take the device list mutex to prevent races with the final phase of
+ * a device replace operation that replaces the device object associated
+ * with map stripes (dev-replace.c:btrfs_dev_replace_finishing()).
+ */
+ mutex_lock(&fs_devices->device_list_mutex);
for (i = 0; i < map->num_stripes; i++) {
struct btrfs_device *device = map->stripes[i].dev;
ret = btrfs_free_dev_extent(trans, device,
map->stripes[i].physical,
&dev_extent_len);
if (ret) {
+ mutex_unlock(&fs_devices->device_list_mutex);
btrfs_abort_transaction(trans, root, ret);
goto out;
}
if (map->stripes[i].dev) {
ret = btrfs_update_device(trans, map->stripes[i].dev);
if (ret) {
+ mutex_unlock(&fs_devices->device_list_mutex);
btrfs_abort_transaction(trans, root, ret);
goto out;
}
}
}
+ mutex_unlock(&fs_devices->device_list_mutex);
+
ret = btrfs_free_chunk(trans, root, chunk_objectid, chunk_offset);
if (ret) {
btrfs_abort_transaction(trans, root, ret);
if (IS_ERR(uuid_root)) {
ret = PTR_ERR(uuid_root);
btrfs_abort_transaction(trans, tree_root, ret);
+ btrfs_end_transaction(trans, tree_root);
return ret;
}
}
}
if (found) {
- if (physical_of_found + map->stripe_len <=
- dev_replace->cursor_left) {
- struct btrfs_bio_stripe *tgtdev_stripe =
- bbio->stripes + num_stripes;
+ struct btrfs_bio_stripe *tgtdev_stripe =
+ bbio->stripes + num_stripes;
- tgtdev_stripe->physical = physical_of_found;
- tgtdev_stripe->length =
- bbio->stripes[index_srcdev].length;
- tgtdev_stripe->dev = dev_replace->tgtdev;
- bbio->tgtdev_map[index_srcdev] = num_stripes;
+ tgtdev_stripe->physical = physical_of_found;
+ tgtdev_stripe->length =
+ bbio->stripes[index_srcdev].length;
+ tgtdev_stripe->dev = dev_replace->tgtdev;
+ bbio->tgtdev_map[index_srcdev] = num_stripes;
- tgtdev_indexes++;
- num_stripes++;
- }
+ tgtdev_indexes++;
+ num_stripes++;
}
}
return dev;
}
-static int read_one_chunk(struct btrfs_root *root, struct btrfs_key *key,
- struct extent_buffer *leaf,
- struct btrfs_chunk *chunk)
+/* Return -EIO if any error, otherwise return 0. */
+static int btrfs_check_chunk_valid(struct btrfs_root *root,
+ struct extent_buffer *leaf,
+ struct btrfs_chunk *chunk, u64 logical)
{
- struct btrfs_mapping_tree *map_tree = &root->fs_info->mapping_tree;
- struct map_lookup *map;
- struct extent_map *em;
- u64 logical;
u64 length;
u64 stripe_len;
- u64 devid;
- u8 uuid[BTRFS_UUID_SIZE];
- int num_stripes;
- int ret;
- int i;
+ u16 num_stripes;
+ u16 sub_stripes;
+ u64 type;
- logical = key->offset;
length = btrfs_chunk_length(leaf, chunk);
stripe_len = btrfs_chunk_stripe_len(leaf, chunk);
num_stripes = btrfs_chunk_num_stripes(leaf, chunk);
- /* Validation check */
+ sub_stripes = btrfs_chunk_sub_stripes(leaf, chunk);
+ type = btrfs_chunk_type(leaf, chunk);
+
if (!num_stripes) {
btrfs_err(root->fs_info, "invalid chunk num_stripes: %u",
num_stripes);
"invalid chunk logical %llu", logical);
return -EIO;
}
+ if (btrfs_chunk_sector_size(leaf, chunk) != root->sectorsize) {
+ btrfs_err(root->fs_info, "invalid chunk sectorsize %u",
+ btrfs_chunk_sector_size(leaf, chunk));
+ return -EIO;
+ }
if (!length || !IS_ALIGNED(length, root->sectorsize)) {
btrfs_err(root->fs_info,
"invalid chunk length %llu", length);
return -EIO;
}
if (~(BTRFS_BLOCK_GROUP_TYPE_MASK | BTRFS_BLOCK_GROUP_PROFILE_MASK) &
- btrfs_chunk_type(leaf, chunk)) {
+ type) {
btrfs_err(root->fs_info, "unrecognized chunk type: %llu",
~(BTRFS_BLOCK_GROUP_TYPE_MASK |
BTRFS_BLOCK_GROUP_PROFILE_MASK) &
btrfs_chunk_type(leaf, chunk));
return -EIO;
}
+ if ((type & BTRFS_BLOCK_GROUP_RAID10 && sub_stripes != 2) ||
+ (type & BTRFS_BLOCK_GROUP_RAID1 && num_stripes < 1) ||
+ (type & BTRFS_BLOCK_GROUP_RAID5 && num_stripes < 2) ||
+ (type & BTRFS_BLOCK_GROUP_RAID6 && num_stripes < 3) ||
+ (type & BTRFS_BLOCK_GROUP_DUP && num_stripes > 2) ||
+ ((type & BTRFS_BLOCK_GROUP_PROFILE_MASK) == 0 &&
+ num_stripes != 1)) {
+ btrfs_err(root->fs_info,
+ "invalid num_stripes:sub_stripes %u:%u for profile %llu",
+ num_stripes, sub_stripes,
+ type & BTRFS_BLOCK_GROUP_PROFILE_MASK);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int read_one_chunk(struct btrfs_root *root, struct btrfs_key *key,
+ struct extent_buffer *leaf,
+ struct btrfs_chunk *chunk)
+{
+ struct btrfs_mapping_tree *map_tree = &root->fs_info->mapping_tree;
+ struct map_lookup *map;
+ struct extent_map *em;
+ u64 logical;
+ u64 length;
+ u64 stripe_len;
+ u64 devid;
+ u8 uuid[BTRFS_UUID_SIZE];
+ int num_stripes;
+ int ret;
+ int i;
+
+ logical = key->offset;
+ length = btrfs_chunk_length(leaf, chunk);
+ stripe_len = btrfs_chunk_stripe_len(leaf, chunk);
+ num_stripes = btrfs_chunk_num_stripes(leaf, chunk);
+
+ ret = btrfs_check_chunk_valid(root, leaf, chunk, logical);
+ if (ret)
+ return ret;
read_lock(&map_tree->map_tree.lock);
em = lookup_extent_mapping(&map_tree->map_tree, logical, 1);
u32 array_size;
u32 len = 0;
u32 cur_offset;
+ u64 type;
struct btrfs_key key;
ASSERT(BTRFS_SUPER_INFO_SIZE <= root->nodesize);
break;
}
+ type = btrfs_chunk_type(sb, chunk);
+ if ((type & BTRFS_BLOCK_GROUP_SYSTEM) == 0) {
+ btrfs_err(root->fs_info,
+ "invalid chunk type %llu in sys_array at offset %u",
+ type, cur_offset);
+ ret = -EIO;
+ break;
+ }
+
len = btrfs_chunk_item_size(num_stripes);
if (cur_offset + len > array_size)
goto out_short_read;
sb_array_offset += len;
cur_offset += len;
}
+ clear_extent_buffer_uptodate(sb);
free_extent_buffer_stale(sb);
return ret;
out_short_read:
printk(KERN_ERR "BTRFS: sys_array too short to read %u bytes at offset %u\n",
len, cur_offset);
+ clear_extent_buffer_uptodate(sb);
free_extent_buffer_stale(sb);
return -EIO;
}
struct btrfs_key found_key;
int ret;
int slot;
+ u64 total_dev = 0;
root = root->fs_info->chunk_root;
ret = read_one_dev(root, leaf, dev_item);
if (ret)
goto error;
+ total_dev++;
} else if (found_key.type == BTRFS_CHUNK_ITEM_KEY) {
struct btrfs_chunk *chunk;
chunk = btrfs_item_ptr(leaf, slot, struct btrfs_chunk);
}
path->slots[0]++;
}
+
+ /*
+ * After loading chunk tree, we've got all device information,
+ * do another round of validation checks.
+ */
+ if (total_dev != root->fs_info->fs_devices->total_devices) {
+ btrfs_err(root->fs_info,
+ "super_num_devices %llu mismatch with num_devices %llu found here",
+ btrfs_super_num_devices(root->fs_info->super_copy),
+ total_dev);
+ ret = -EINVAL;
+ goto error;
+ }
+ if (btrfs_super_total_bytes(root->fs_info->super_copy) <
+ root->fs_info->fs_devices->total_rw_bytes) {
+ btrfs_err(root->fs_info,
+ "super_total_bytes %llu mismatch with fs_devices total_rw_bytes %llu",
+ btrfs_super_total_bytes(root->fs_info->super_copy),
+ root->fs_info->fs_devices->total_rw_bytes);
+ ret = -EINVAL;
+ goto error;
+ }
ret = 0;
error:
unlock_chunks(root);
* check if the backing cache is updated to FS-Cache
* - called by FS-Cache when evaluates if need to invalidate the cache
*/
-static bool cachefiles_check_consistency(struct fscache_operation *op)
+static int cachefiles_check_consistency(struct fscache_operation *op)
{
struct cachefiles_object *object;
struct cachefiles_cache *cache;
for (i = 0; i < num_pages; i++) {
struct page *page = osd_data->pages[i];
- if (rc < 0 && rc != -ENOENT)
+ if (rc < 0 && rc != -ENOENT) {
+ ceph_fscache_readpage_cancel(inode, page);
goto unlock;
+ }
if (bytes < (int)PAGE_SIZE) {
/* zero (remainder of) page */
int s = bytes < 0 ? 0 : bytes;
CONGESTION_ON_THRESH(fsc->mount_options->congestion_kb))
set_bdi_congested(&fsc->backing_dev_info, BLK_RW_ASYNC);
- ceph_readpage_to_fscache(inode, page);
-
set_page_writeback(page);
err = ceph_osdc_writepages(osdc, ceph_vino(inode),
&ci->i_layout, snapc,
#include "cache.h"
struct ceph_aux_inode {
+ u64 version;
struct timespec mtime;
loff_t size;
};
fsc->fscache = fscache_acquire_cookie(ceph_cache_netfs.primary_index,
&ceph_fscache_fsid_object_def,
fsc, true);
-
- if (fsc->fscache == NULL) {
+ if (!fsc->fscache)
pr_err("Unable to resgister fsid: %p fscache cookie", fsc);
- return 0;
- }
-
- fsc->revalidate_wq = alloc_workqueue("ceph-revalidate", 0, 1);
- if (fsc->revalidate_wq == NULL)
- return -ENOMEM;
return 0;
}
const struct inode* inode = &ci->vfs_inode;
memset(&aux, 0, sizeof(aux));
+ aux.version = ci->i_version;
aux.mtime = inode->i_mtime;
aux.size = i_size_read(inode);
return FSCACHE_CHECKAUX_OBSOLETE;
memset(&aux, 0, sizeof(aux));
+ aux.version = ci->i_version;
aux.mtime = inode->i_mtime;
aux.size = i_size_read(inode);
.now_uncached = ceph_fscache_inode_now_uncached,
};
-void ceph_fscache_register_inode_cookie(struct ceph_fs_client* fsc,
- struct ceph_inode_info* ci)
+void ceph_fscache_register_inode_cookie(struct inode *inode)
{
- struct inode* inode = &ci->vfs_inode;
+ struct ceph_inode_info *ci = ceph_inode(inode);
+ struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
/* No caching for filesystem */
if (fsc->fscache == NULL)
return;
/* Only cache for regular files that are read only */
- if ((ci->vfs_inode.i_mode & S_IFREG) == 0)
+ if (!S_ISREG(inode->i_mode))
return;
- /* Avoid multiple racing open requests */
- inode_lock(inode);
-
- if (ci->fscache)
- goto done;
-
- ci->fscache = fscache_acquire_cookie(fsc->fscache,
- &ceph_fscache_inode_object_def,
- ci, true);
- fscache_check_consistency(ci->fscache);
-done:
+ inode_lock_nested(inode, I_MUTEX_CHILD);
+ if (!ci->fscache) {
+ ci->fscache = fscache_acquire_cookie(fsc->fscache,
+ &ceph_fscache_inode_object_def,
+ ci, false);
+ }
inode_unlock(inode);
-
}
void ceph_fscache_unregister_inode_cookie(struct ceph_inode_info* ci)
fscache_relinquish_cookie(cookie, 0);
}
+static bool ceph_fscache_can_enable(void *data)
+{
+ struct inode *inode = data;
+ return !inode_is_open_for_write(inode);
+}
+
+void ceph_fscache_file_set_cookie(struct inode *inode, struct file *filp)
+{
+ struct ceph_inode_info *ci = ceph_inode(inode);
+
+ if (!fscache_cookie_valid(ci->fscache))
+ return;
+
+ if (inode_is_open_for_write(inode)) {
+ dout("fscache_file_set_cookie %p %p disabling cache\n",
+ inode, filp);
+ fscache_disable_cookie(ci->fscache, false);
+ fscache_uncache_all_inode_pages(ci->fscache, inode);
+ } else {
+ fscache_enable_cookie(ci->fscache, ceph_fscache_can_enable,
+ inode);
+ if (fscache_cookie_enabled(ci->fscache)) {
+ dout("fscache_file_set_cookie %p %p enabing cache\n",
+ inode, filp);
+ }
+ }
+}
+
static void ceph_vfs_readpage_complete(struct page *page, void *data, int error)
{
if (!error)
static inline bool cache_valid(struct ceph_inode_info *ci)
{
- return ((ceph_caps_issued(ci) & CEPH_CAP_FILE_CACHE) &&
- (ci->i_fscache_gen == ci->i_rdcache_gen));
+ return ci->i_fscache_gen == ci->i_rdcache_gen;
}
void ceph_fscache_unregister_fs(struct ceph_fs_client* fsc)
{
- if (fsc->revalidate_wq)
- destroy_workqueue(fsc->revalidate_wq);
-
fscache_relinquish_cookie(fsc->fscache, 0);
fsc->fscache = NULL;
}
-static void ceph_revalidate_work(struct work_struct *work)
-{
- int issued;
- u32 orig_gen;
- struct ceph_inode_info *ci = container_of(work, struct ceph_inode_info,
- i_revalidate_work);
- struct inode *inode = &ci->vfs_inode;
-
- spin_lock(&ci->i_ceph_lock);
- issued = __ceph_caps_issued(ci, NULL);
- orig_gen = ci->i_rdcache_gen;
- spin_unlock(&ci->i_ceph_lock);
-
- if (!(issued & CEPH_CAP_FILE_CACHE)) {
- dout("revalidate_work lost cache before validation %p\n",
- inode);
- goto out;
- }
-
- if (!fscache_check_consistency(ci->fscache))
- fscache_invalidate(ci->fscache);
-
- spin_lock(&ci->i_ceph_lock);
- /* Update the new valid generation (backwards sanity check too) */
- if (orig_gen > ci->i_fscache_gen) {
- ci->i_fscache_gen = orig_gen;
- }
- spin_unlock(&ci->i_ceph_lock);
-
-out:
- iput(&ci->vfs_inode);
-}
-
-void ceph_queue_revalidate(struct inode *inode)
+/*
+ * caller should hold CEPH_CAP_FILE_{RD,CACHE}
+ */
+void ceph_fscache_revalidate_cookie(struct ceph_inode_info *ci)
{
- struct ceph_fs_client *fsc = ceph_sb_to_client(inode->i_sb);
- struct ceph_inode_info *ci = ceph_inode(inode);
-
- if (fsc->revalidate_wq == NULL || ci->fscache == NULL)
+ if (cache_valid(ci))
return;
- ihold(inode);
-
- if (queue_work(ceph_sb_to_client(inode->i_sb)->revalidate_wq,
- &ci->i_revalidate_work)) {
- dout("ceph_queue_revalidate %p\n", inode);
- } else {
- dout("ceph_queue_revalidate %p failed\n)", inode);
- iput(inode);
+ /* resue i_truncate_mutex. There should be no pending
+ * truncate while the caller holds CEPH_CAP_FILE_RD */
+ mutex_lock(&ci->i_truncate_mutex);
+ if (!cache_valid(ci)) {
+ if (fscache_check_consistency(ci->fscache))
+ fscache_invalidate(ci->fscache);
+ spin_lock(&ci->i_ceph_lock);
+ ci->i_fscache_gen = ci->i_rdcache_gen;
+ spin_unlock(&ci->i_ceph_lock);
}
-}
-
-void ceph_fscache_inode_init(struct ceph_inode_info *ci)
-{
- ci->fscache = NULL;
- /* The first load is verifed cookie open time */
- ci->i_fscache_gen = 1;
- INIT_WORK(&ci->i_revalidate_work, ceph_revalidate_work);
+ mutex_unlock(&ci->i_truncate_mutex);
}
int ceph_fscache_register_fs(struct ceph_fs_client* fsc);
void ceph_fscache_unregister_fs(struct ceph_fs_client* fsc);
-void ceph_fscache_inode_init(struct ceph_inode_info *ci);
-void ceph_fscache_register_inode_cookie(struct ceph_fs_client* fsc,
- struct ceph_inode_info* ci);
+void ceph_fscache_register_inode_cookie(struct inode *inode);
void ceph_fscache_unregister_inode_cookie(struct ceph_inode_info* ci);
+void ceph_fscache_file_set_cookie(struct inode *inode, struct file *filp);
+void ceph_fscache_revalidate_cookie(struct ceph_inode_info *ci);
int ceph_readpage_from_fscache(struct inode *inode, struct page *page);
int ceph_readpages_from_fscache(struct inode *inode,
unsigned *nr_pages);
void ceph_readpage_to_fscache(struct inode *inode, struct page *page);
void ceph_invalidate_fscache_page(struct inode* inode, struct page *page);
-void ceph_queue_revalidate(struct inode *inode);
-static inline void ceph_fscache_update_objectsize(struct inode *inode)
+static inline void ceph_fscache_inode_init(struct ceph_inode_info *ci)
{
- struct ceph_inode_info *ci = ceph_inode(inode);
- fscache_attr_changed(ci->fscache);
+ ci->fscache = NULL;
+ ci->i_fscache_gen = 0;
}
static inline void ceph_fscache_invalidate(struct inode *inode)
return fscache_readpages_cancel(ci->fscache, pages);
}
+static inline void ceph_disable_fscache_readpage(struct ceph_inode_info *ci)
+{
+ ci->i_fscache_gen = ci->i_rdcache_gen - 1;
+}
+
#else
static inline int ceph_fscache_register(void)
{
}
-static inline void ceph_fscache_register_inode_cookie(struct ceph_fs_client* parent_fsc,
- struct ceph_inode_info* ci)
+static inline void ceph_fscache_register_inode_cookie(struct inode *inode)
+{
+}
+
+static inline void ceph_fscache_unregister_inode_cookie(struct ceph_inode_info* ci)
+{
+}
+
+static inline void ceph_fscache_file_set_cookie(struct inode *inode,
+ struct file *filp)
+{
+}
+
+static inline void ceph_fscache_revalidate_cookie(struct ceph_inode_info *ci)
{
}
{
}
-static inline void ceph_fscache_update_objectsize(struct inode *inode)
-{
-}
-
static inline void ceph_fscache_invalidate(struct inode *inode)
{
}
{
}
-static inline void ceph_fscache_unregister_inode_cookie(struct ceph_inode_info* ci)
-{
-}
-
static inline int ceph_release_fscache_page(struct page *page, gfp_t gfp)
{
return 1;
{
}
-static inline void ceph_queue_revalidate(struct inode *inode)
+static inline void ceph_disable_fscache_readpage(struct ceph_inode_info *ci)
{
}
snap_rwsem_locked = true;
}
*got = need | (have & want);
+ if ((need & CEPH_CAP_FILE_RD) &&
+ !(*got & CEPH_CAP_FILE_CACHE))
+ ceph_disable_fscache_readpage(ci);
__take_cap_refs(ci, *got, true);
ret = 1;
}
break;
}
+ if ((_got & CEPH_CAP_FILE_RD) && (_got & CEPH_CAP_FILE_CACHE))
+ ceph_fscache_revalidate_cookie(ci);
+
*got = _got;
return 0;
}
bool writeback = false;
bool queue_trunc = false;
bool queue_invalidate = false;
- bool queue_revalidate = false;
bool deleted_inode = false;
bool fill_inline = false;
ci->i_rdcache_revoking = ci->i_rdcache_gen;
}
}
-
- ceph_fscache_invalidate(inode);
}
/* side effects now are allowed */
}
}
- /* Do we need to revalidate our fscache cookie. Don't bother on the
- * first cache cap as we already validate at cookie creation time. */
- if ((issued & CEPH_CAP_FILE_CACHE) && ci->i_rdcache_gen > 1)
- queue_revalidate = true;
-
if (newcaps & CEPH_CAP_ANY_RD) {
/* ctime/mtime/atime? */
ceph_decode_timespec(&mtime, &grant->mtime);
if (fill_inline)
ceph_fill_inline_data(inode, NULL, inline_data, inline_len);
- if (queue_trunc) {
+ if (queue_trunc)
ceph_queue_vmtruncate(inode);
- ceph_queue_revalidate(inode);
- } else if (queue_revalidate)
- ceph_queue_revalidate(inode);
if (writeback)
/*
truncate_seq, truncate_size, size);
spin_unlock(&ci->i_ceph_lock);
- if (queue_trunc) {
+ if (queue_trunc)
ceph_queue_vmtruncate(inode);
- ceph_fscache_invalidate(inode);
- }
}
/*
{
struct ceph_file_info *cf;
int ret = 0;
- struct ceph_inode_info *ci = ceph_inode(inode);
- struct ceph_fs_client *fsc = ceph_sb_to_client(inode->i_sb);
- struct ceph_mds_client *mdsc = fsc->mdsc;
switch (inode->i_mode & S_IFMT) {
case S_IFREG:
- /* First file open request creates the cookie, we want to keep
- * this cookie around for the filetime of the inode as not to
- * have to worry about fscache register / revoke / operation
- * races.
- *
- * Also, if we know the operation is going to invalidate data
- * (non readonly) just nuke the cache right away.
- */
- ceph_fscache_register_inode_cookie(mdsc->fsc, ci);
- if ((fmode & CEPH_FILE_MODE_WR))
- ceph_fscache_invalidate(inode);
+ ceph_fscache_register_inode_cookie(inode);
+ ceph_fscache_file_set_cookie(inode, file);
case S_IFDIR:
dout("init_file %p %p 0%o (regular)\n", inode, file,
inode->i_mode);
}
retry_snap:
- if (ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL)) {
+ if (ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL)) {
err = -ENOSPC;
goto out;
}
iov_iter_advance(from, written);
ceph_put_snap_context(snapc);
} else {
- loff_t old_size = i_size_read(inode);
/*
* No need to acquire the i_truncate_mutex. Because
* the MDS revokes Fwb caps before sending truncate
written = generic_perform_write(file, from, pos);
if (likely(written >= 0))
iocb->ki_pos = pos + written;
- if (i_size_read(inode) > old_size)
- ceph_fscache_update_objectsize(inode);
inode_unlock(inode);
}
ceph_put_cap_refs(ci, got);
if (written >= 0) {
- if (ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_NEARFULL))
+ if (ceph_osdmap_flag(osdc, CEPH_OSDMAP_NEARFULL))
iocb->ki_flags |= IOCB_DSYNC;
written = generic_write_sync(iocb, written);
goto unlock;
}
- if (ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL) &&
- !(mode & FALLOC_FL_PUNCH_HOLE)) {
+ if (ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL) &&
+ !(mode & FALLOC_FL_PUNCH_HOLE)) {
ret = -ENOSPC;
goto unlock;
}
#ifdef CONFIG_CEPH_FSCACHE
struct fscache_cookie *fscache;
- struct workqueue_struct *revalidate_wq;
#endif
};
#ifdef CONFIG_CEPH_FSCACHE
struct fscache_cookie *fscache;
- u32 i_fscache_gen; /* sequence, for delayed fscache validate */
- struct work_struct i_revalidate_work;
+ u32 i_fscache_gen;
#endif
struct inode vfs_inode; /* at end */
};
return 0;
file->f_pos = pos;
cprm->written += n;
+ cprm->pos += n;
nr -= n;
}
return 1;
if (dump_interrupted() ||
file->f_op->llseek(file, nr, SEEK_CUR) < 0)
return 0;
+ cprm->pos += nr;
return 1;
} else {
while (nr > PAGE_SIZE) {
int dump_align(struct coredump_params *cprm, int align)
{
- unsigned mod = cprm->file->f_pos & (align - 1);
+ unsigned mod = cprm->pos & (align - 1);
if (align & (align - 1))
return 0;
return mod ? dump_skip(cprm, align - mod) : 1;
struct dentry *dentry = __d_alloc(parent->d_sb, name);
if (!dentry)
return NULL;
-
+ dentry->d_flags |= DCACHE_RCUACCESS;
spin_lock(&parent->d_lock);
/*
* don't need child lock because it is not subject
{
BUG_ON(!d_unhashed(entry));
hlist_bl_lock(b);
- entry->d_flags |= DCACHE_RCUACCESS;
hlist_bl_add_head_rcu(&entry->d_hash, b);
hlist_bl_unlock(b);
}
/* ... and switch them in the tree */
if (IS_ROOT(dentry)) {
/* splicing a tree */
+ dentry->d_flags |= DCACHE_RCUACCESS;
dentry->d_parent = target->d_parent;
target->d_parent = target;
list_del_init(&target->d_child);
static DEFINE_MUTEX(allocated_ptys_lock);
-static struct vfsmount *devpts_mnt;
-
struct pts_mount_opts {
int setuid;
int setgid;
kgid_t gid;
umode_t mode;
umode_t ptmxmode;
- int newinstance;
+ int reserve;
int max;
};
{Opt_uid, "uid=%u"},
{Opt_gid, "gid=%u"},
{Opt_mode, "mode=%o"},
-#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES
{Opt_ptmxmode, "ptmxmode=%o"},
{Opt_newinstance, "newinstance"},
{Opt_max, "max=%d"},
-#endif
{Opt_err, NULL}
};
return sb->s_fs_info;
}
-static inline struct super_block *pts_sb_from_inode(struct inode *inode)
+struct pts_fs_info *devpts_acquire(struct file *filp)
{
-#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES
- if (inode->i_sb->s_magic == DEVPTS_SUPER_MAGIC)
- return inode->i_sb;
-#endif
- if (!devpts_mnt)
- return NULL;
- return devpts_mnt->mnt_sb;
+ struct pts_fs_info *result;
+ struct path path;
+ struct super_block *sb;
+ int err;
+
+ path = filp->f_path;
+ path_get(&path);
+
+ /* Has the devpts filesystem already been found? */
+ sb = path.mnt->mnt_sb;
+ if (sb->s_magic != DEVPTS_SUPER_MAGIC) {
+ /* Is a devpts filesystem at "pts" in the same directory? */
+ err = path_pts(&path);
+ if (err) {
+ result = ERR_PTR(err);
+ goto out;
+ }
+
+ /* Is the path the root of a devpts filesystem? */
+ result = ERR_PTR(-ENODEV);
+ sb = path.mnt->mnt_sb;
+ if ((sb->s_magic != DEVPTS_SUPER_MAGIC) ||
+ (path.mnt->mnt_root != sb->s_root))
+ goto out;
+ }
+
+ /*
+ * pty code needs to hold extra references in case of last /dev/tty close
+ */
+ atomic_inc(&sb->s_active);
+ result = DEVPTS_SB(sb);
+
+out:
+ path_put(&path);
+ return result;
+}
+
+void devpts_release(struct pts_fs_info *fsi)
+{
+ deactivate_super(fsi->sb);
}
#define PARSE_MOUNT 0
/*
* parse_mount_options():
* Set @opts to mount options specified in @data. If an option is not
- * specified in @data, set it to its default value. The exception is
- * 'newinstance' option which can only be set/cleared on a mount (i.e.
- * cannot be changed during remount).
+ * specified in @data, set it to its default value.
*
* Note: @data may be NULL (in which case all options are set to default).
*/
opts->ptmxmode = DEVPTS_DEFAULT_PTMX_MODE;
opts->max = NR_UNIX98_PTY_MAX;
- /* newinstance makes sense only on initial mount */
+ /* Only allow instances mounted from the initial mount
+ * namespace to tap the reserve pool of ptys.
+ */
if (op == PARSE_MOUNT)
- opts->newinstance = 0;
+ opts->reserve =
+ (current->nsproxy->mnt_ns == init_task.nsproxy->mnt_ns);
while ((p = strsep(&data, ",")) != NULL) {
substring_t args[MAX_OPT_ARGS];
return -EINVAL;
opts->mode = option & S_IALLUGO;
break;
-#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES
case Opt_ptmxmode:
if (match_octal(&args[0], &option))
return -EINVAL;
opts->ptmxmode = option & S_IALLUGO;
break;
case Opt_newinstance:
- /* newinstance makes sense only on initial mount */
- if (op == PARSE_MOUNT)
- opts->newinstance = 1;
break;
case Opt_max:
if (match_int(&args[0], &option) ||
return -EINVAL;
opts->max = option;
break;
-#endif
default:
pr_err("called with bogus options\n");
return -EINVAL;
return 0;
}
-#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES
static int mknod_ptmx(struct super_block *sb)
{
int mode;
inode->i_mode = S_IFCHR|fsi->mount_opts.ptmxmode;
}
}
-#else
-static inline void update_ptmx_mode(struct pts_fs_info *fsi)
-{
- return;
-}
-#endif
static int devpts_remount(struct super_block *sb, int *flags, char *data)
{
seq_printf(seq, ",gid=%u",
from_kgid_munged(&init_user_ns, opts->gid));
seq_printf(seq, ",mode=%03o", opts->mode);
-#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES
seq_printf(seq, ",ptmxmode=%03o", opts->ptmxmode);
if (opts->max < NR_UNIX98_PTY_MAX)
seq_printf(seq, ",max=%d", opts->max);
-#endif
return 0;
}
return -ENOMEM;
}
-#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES
-static int compare_init_pts_sb(struct super_block *s, void *p)
-{
- if (devpts_mnt)
- return devpts_mnt->mnt_sb == s;
- return 0;
-}
-
/*
* devpts_mount()
*
- * If the '-o newinstance' mount option was specified, mount a new
- * (private) instance of devpts. PTYs created in this instance are
- * independent of the PTYs in other devpts instances.
- *
- * If the '-o newinstance' option was not specified, mount/remount the
- * initial kernel mount of devpts. This type of mount gives the
- * legacy, single-instance semantics.
- *
- * The 'newinstance' option is needed to support multiple namespace
- * semantics in devpts while preserving backward compatibility of the
- * current 'single-namespace' semantics. i.e all mounts of devpts
- * without the 'newinstance' mount option should bind to the initial
- * kernel mount, like mount_single().
- *
- * Mounts with 'newinstance' option create a new, private namespace.
- *
- * NOTE:
- *
- * For single-mount semantics, devpts cannot use mount_single(),
- * because mount_single()/sget() find and use the super-block from
- * the most recent mount of devpts. But that recent mount may be a
- * 'newinstance' mount and mount_single() would pick the newinstance
- * super-block instead of the initial super-block.
+ * Mount a new (private) instance of devpts. PTYs created in this
+ * instance are independent of the PTYs in other devpts instances.
*/
static struct dentry *devpts_mount(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data)
if (error)
return ERR_PTR(error);
- /* Require newinstance for all user namespace mounts to ensure
- * the mount options are not changed.
- */
- if ((current_user_ns() != &init_user_ns) && !opts.newinstance)
- return ERR_PTR(-EINVAL);
-
- if (opts.newinstance)
- s = sget(fs_type, NULL, set_anon_super, flags, NULL);
- else
- s = sget(fs_type, compare_init_pts_sb, set_anon_super, flags,
- NULL);
-
+ s = sget(fs_type, NULL, set_anon_super, flags, NULL);
if (IS_ERR(s))
return ERR_CAST(s);
return ERR_PTR(error);
}
-#else
-/*
- * This supports only the legacy single-instance semantics (no
- * multiple-instance semantics)
- */
-static struct dentry *devpts_mount(struct file_system_type *fs_type, int flags,
- const char *dev_name, void *data)
-{
- return mount_single(fs_type, flags, data, devpts_fill_super);
-}
-#endif
-
static void devpts_kill_sb(struct super_block *sb)
{
struct pts_fs_info *fsi = DEVPTS_SB(sb);
.name = "devpts",
.mount = devpts_mount,
.kill_sb = devpts_kill_sb,
-#ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES
.fs_flags = FS_USERNS_MOUNT | FS_USERNS_DEV_MOUNT,
-#endif
};
/*
int index;
int ida_ret;
- if (!fsi)
- return -ENODEV;
-
retry:
if (!ida_pre_get(&fsi->allocated_ptys, GFP_KERNEL))
return -ENOMEM;
mutex_lock(&allocated_ptys_lock);
- if (pty_count >= pty_limit -
- (fsi->mount_opts.newinstance ? pty_reserve : 0)) {
+ if (pty_count >= (pty_limit -
+ (fsi->mount_opts.reserve ? 0 : pty_reserve))) {
mutex_unlock(&allocated_ptys_lock);
return -ENOSPC;
}
mutex_unlock(&allocated_ptys_lock);
}
-/*
- * pty code needs to hold extra references in case of last /dev/tty close
- */
-struct pts_fs_info *devpts_get_ref(struct inode *ptmx_inode, struct file *file)
-{
- struct super_block *sb;
- struct pts_fs_info *fsi;
-
- sb = pts_sb_from_inode(ptmx_inode);
- if (!sb)
- return NULL;
- fsi = DEVPTS_SB(sb);
- if (!fsi)
- return NULL;
-
- atomic_inc(&sb->s_active);
- return fsi;
-}
-
-void devpts_put_ref(struct pts_fs_info *fsi)
-{
- deactivate_super(fsi->sb);
-}
-
/**
* devpts_pty_new -- create a new inode in /dev/pts/
* @ptmx_inode: inode of the master
struct dentry *devpts_pty_new(struct pts_fs_info *fsi, int index, void *priv)
{
struct dentry *dentry;
- struct super_block *sb;
+ struct super_block *sb = fsi->sb;
struct inode *inode;
struct dentry *root;
struct pts_mount_opts *opts;
char s[12];
- if (!fsi)
- return ERR_PTR(-ENODEV);
-
- sb = fsi->sb;
root = sb->s_root;
opts = &fsi->mount_opts;
static int __init init_devpts_fs(void)
{
int err = register_filesystem(&devpts_fs_type);
- struct ctl_table_header *table;
-
if (!err) {
- struct vfsmount *mnt;
-
- table = register_sysctl_table(pty_root_table);
- mnt = kern_mount(&devpts_fs_type);
- if (IS_ERR(mnt)) {
- err = PTR_ERR(mnt);
- unregister_filesystem(&devpts_fs_type);
- unregister_sysctl_table(table);
- } else {
- devpts_mnt = mnt;
- }
+ register_sysctl_table(pty_root_table);
}
return err;
}
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/mount.h>
+#include <linux/file.h>
#include "ecryptfs_kernel.h"
struct ecryptfs_open_req {
flags |= IS_RDONLY(d_inode(lower_dentry)) ? O_RDONLY : O_RDWR;
(*lower_file) = dentry_open(&req.path, flags, cred);
if (!IS_ERR(*lower_file))
- goto out;
+ goto have_file;
if ((flags & O_ACCMODE) == O_RDONLY) {
rc = PTR_ERR((*lower_file));
goto out;
mutex_unlock(&ecryptfs_kthread_ctl.mux);
wake_up(&ecryptfs_kthread_ctl.wait);
wait_for_completion(&req.done);
- if (IS_ERR(*lower_file))
+ if (IS_ERR(*lower_file)) {
rc = PTR_ERR(*lower_file);
+ goto out;
+ }
+have_file:
+ if ((*lower_file)->f_op->mmap == NULL) {
+ fput(*lower_file);
+ *lower_file = NULL;
+ rc = -EMEDIUMTYPE;
+ }
out:
return rc;
}
put_page(results[i]);
}
+ wake_up_bit(&cookie->flags, 0);
+
_leave("");
}
}
}
+static int path_parent_directory(struct path *path)
+{
+ struct dentry *old = path->dentry;
+ /* rare case of legitimate dget_parent()... */
+ path->dentry = dget_parent(path->dentry);
+ dput(old);
+ if (unlikely(!path_connected(path)))
+ return -ENOENT;
+ return 0;
+}
+
static int follow_dotdot(struct nameidata *nd)
{
while(1) {
- struct dentry *old = nd->path.dentry;
-
if (nd->path.dentry == nd->root.dentry &&
nd->path.mnt == nd->root.mnt) {
break;
}
if (nd->path.dentry != nd->path.mnt->mnt_root) {
- /* rare case of legitimate dget_parent()... */
- nd->path.dentry = dget_parent(nd->path.dentry);
- dput(old);
- if (unlikely(!path_connected(&nd->path)))
- return -ENOENT;
+ int ret = path_parent_directory(&nd->path);
+ if (ret)
+ return ret;
break;
}
if (!follow_up(&nd->path))
}
EXPORT_SYMBOL(lookup_one_len_unlocked);
+#ifdef CONFIG_UNIX98_PTYS
+int path_pts(struct path *path)
+{
+ /* Find something mounted on "pts" in the same directory as
+ * the input path.
+ */
+ struct dentry *child, *parent;
+ struct qstr this;
+ int ret;
+
+ ret = path_parent_directory(path);
+ if (ret)
+ return ret;
+
+ parent = path->dentry;
+ this.name = "pts";
+ this.len = 3;
+ child = d_hash_and_lookup(parent, &this);
+ if (!child)
+ return -ENOENT;
+
+ path->dentry = child;
+ dput(parent);
+ follow_mount(path);
+ return 0;
+}
+#endif
+
int user_path_at_empty(int dfd, const char __user *name, unsigned flags,
struct path *path, int *empty)
{
}
if (*opened & FILE_CREATED)
fsnotify_create(dir, dentry);
- path->dentry = dentry;
- path->mnt = nd->path.mnt;
- return 1;
+ if (unlikely(d_is_negative(dentry))) {
+ error = -ENOENT;
+ } else {
+ path->dentry = dentry;
+ path->mnt = nd->path.mnt;
+ return 1;
+ }
}
}
dput(dentry);
int acc_mode = op->acc_mode;
unsigned seq;
struct inode *inode;
- struct path save_parent = { .dentry = NULL, .mnt = NULL };
struct path path;
- bool retried = false;
int error;
nd->flags &= ~LOOKUP_PARENT;
return -EISDIR;
}
-retry_lookup:
if (open_flag & (O_CREAT | O_TRUNC | O_WRONLY | O_RDWR)) {
error = mnt_want_write(nd->path.mnt);
if (!error)
got_write = false;
}
+ error = follow_managed(&path, nd);
+ if (unlikely(error < 0))
+ return error;
+
if (unlikely(d_is_negative(path.dentry))) {
path_to_nameidata(&path, nd);
return -ENOENT;
return -EEXIST;
}
- error = follow_managed(&path, nd);
- if (unlikely(error < 0))
- return error;
-
seq = 0; /* out of RCU mode, so the value doesn't matter */
inode = d_backing_inode(path.dentry);
finish_lookup:
if (unlikely(error))
return error;
- if ((nd->flags & LOOKUP_RCU) || nd->path.mnt != path.mnt) {
- path_to_nameidata(&path, nd);
- } else {
- save_parent.dentry = nd->path.dentry;
- save_parent.mnt = mntget(path.mnt);
- nd->path.dentry = path.dentry;
-
- }
+ path_to_nameidata(&path, nd);
nd->inode = inode;
nd->seq = seq;
/* Why this, you ask? _Now_ we might have grown LOOKUP_JUMPED... */
finish_open:
error = complete_walk(nd);
- if (error) {
- path_put(&save_parent);
+ if (error)
return error;
- }
audit_inode(nd->name, nd->path.dentry, 0);
error = -EISDIR;
if ((open_flag & O_CREAT) && d_is_dir(nd->path.dentry))
goto out;
BUG_ON(*opened & FILE_OPENED); /* once it's opened, it's opened */
error = vfs_open(&nd->path, file, current_cred());
- if (!error) {
- *opened |= FILE_OPENED;
- } else {
- if (error == -EOPENSTALE)
- goto stale_open;
+ if (error)
goto out;
- }
+ *opened |= FILE_OPENED;
opened:
error = open_check_o_direct(file);
if (!error)
}
if (got_write)
mnt_drop_write(nd->path.mnt);
- path_put(&save_parent);
return error;
-
-stale_open:
- /* If no saved parent or already retried then can't retry */
- if (!save_parent.dentry || retried)
- goto out;
-
- BUG_ON(save_parent.dentry != dir);
- path_put(&nd->path);
- nd->path = save_parent;
- nd->inode = dir->d_inode;
- save_parent.mnt = NULL;
- save_parent.dentry = NULL;
- if (got_write) {
- mnt_drop_write(nd->path.mnt);
- got_write = false;
- }
- retried = true;
- goto retry_lookup;
}
static int do_tmpfile(struct nameidata *nd, unsigned flags,
mnt_flags |= MNT_NODEV | MNT_LOCK_NODEV;
}
if (type->fs_flags & FS_USERNS_VISIBLE) {
- if (!fs_fully_visible(type, &mnt_flags))
+ if (!fs_fully_visible(type, &mnt_flags)) {
+ put_filesystem(type);
return -EPERM;
+ }
}
}
list_for_each_entry(child, &mnt->mnt_mounts, mnt_child) {
struct inode *inode = child->mnt_mountpoint->d_inode;
/* Only worry about locked mounts */
- if (!(mnt_flags & MNT_LOCKED))
+ if (!(child->mnt.mnt_flags & MNT_LOCKED))
continue;
/* Is the directory permanetly empty? */
if (!is_empty_dir_inode(inode))
if (IS_ERR(sb))
return ERR_CAST(sb);
+ /*
+ * procfs isn't actually a stacking filesystem; however, there is
+ * too much magic going on inside it to permit stacking things on
+ * top of it
+ */
+ sb->s_stack_depth = FILESYSTEM_MAX_STACK_DEPTH;
+
if (!proc_parse_options(options, ns)) {
deactivate_locked_super(sb);
return ERR_PTR(-EINVAL);
*/
extern bool acpi_video_handles_brightness_key_presses(void);
extern int acpi_video_get_levels(struct acpi_device *device,
- struct acpi_video_device_brightness **dev_br);
+ struct acpi_video_device_brightness **dev_br,
+ int *pmax_level);
#else
static inline int acpi_video_register(void) { return 0; }
static inline void acpi_video_unregister(void) { return; }
return false;
}
static inline int acpi_video_get_levels(struct acpi_device *device,
- struct acpi_video_device_brightness **dev_br)
+ struct acpi_video_device_brightness **dev_br,
+ int *pmax_level)
{
return -ENODEV;
}
#include <asm-generic/qspinlock_types.h>
+/**
+ * queued_spin_unlock_wait - wait until the _current_ lock holder releases the lock
+ * @lock : Pointer to queued spinlock structure
+ *
+ * There is a very slight possibility of live-lock if the lockers keep coming
+ * and the waiter is just unfortunate enough to not see any unlock state.
+ */
+#ifndef queued_spin_unlock_wait
+extern void queued_spin_unlock_wait(struct qspinlock *lock);
+#endif
+
/**
* queued_spin_is_locked - is the spinlock locked?
* @lock: Pointer to queued spinlock structure
* Return: 1 if it is locked, 0 otherwise
*/
+#ifndef queued_spin_is_locked
static __always_inline int queued_spin_is_locked(struct qspinlock *lock)
{
/*
- * queued_spin_lock_slowpath() can ACQUIRE the lock before
- * issuing the unordered store that sets _Q_LOCKED_VAL.
- *
- * See both smp_cond_acquire() sites for more detail.
- *
- * This however means that in code like:
- *
- * spin_lock(A) spin_lock(B)
- * spin_unlock_wait(B) spin_is_locked(A)
- * do_something() do_something()
- *
- * Both CPUs can end up running do_something() because the store
- * setting _Q_LOCKED_VAL will pass through the loads in
- * spin_unlock_wait() and/or spin_is_locked().
+ * See queued_spin_unlock_wait().
*
- * Avoid this by issuing a full memory barrier between the spin_lock()
- * and the loads in spin_unlock_wait() and spin_is_locked().
- *
- * Note that regular mutual exclusion doesn't care about this
- * delayed store.
+ * Any !0 state indicates it is locked, even if _Q_LOCKED_VAL
+ * isn't immediately observable.
*/
- smp_mb();
- return atomic_read(&lock->val) & _Q_LOCKED_MASK;
+ return atomic_read(&lock->val);
}
+#endif
/**
* queued_spin_value_unlocked - is the spinlock structure unlocked?
}
#endif
-/**
- * queued_spin_unlock_wait - wait until current lock holder releases the lock
- * @lock : Pointer to queued spinlock structure
- *
- * There is a very slight possibility of live-lock if the lockers keep coming
- * and the waiter is just unfortunate enough to not see any unlock state.
- */
-static inline void queued_spin_unlock_wait(struct qspinlock *lock)
-{
- /* See queued_spin_is_locked() */
- smp_mb();
- while (atomic_read(&lock->val) & _Q_LOCKED_MASK)
- cpu_relax();
-}
-
#ifndef virt_spin_lock
static __always_inline bool virt_spin_lock(struct qspinlock *lock)
{
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for Exynos5421 clock controller.
+*/
+
#ifndef _DT_BINDINGS_CLOCK_EXYNOS_5410_H
#define _DT_BINDINGS_CLOCK_EXYNOS_5410_H
/* core clocks */
-#define CLK_FIN_PLL 1
-#define CLK_FOUT_APLL 2
-#define CLK_FOUT_CPLL 3
-#define CLK_FOUT_MPLL 4
-#define CLK_FOUT_BPLL 5
-#define CLK_FOUT_KPLL 6
+#define CLK_FIN_PLL 1
+#define CLK_FOUT_APLL 2
+#define CLK_FOUT_CPLL 3
+#define CLK_FOUT_MPLL 4
+#define CLK_FOUT_BPLL 5
+#define CLK_FOUT_KPLL 6
/* gate for special clocks (sclk) */
-#define CLK_SCLK_UART0 128
-#define CLK_SCLK_UART1 129
-#define CLK_SCLK_UART2 130
-#define CLK_SCLK_UART3 131
-#define CLK_SCLK_MMC0 132
-#define CLK_SCLK_MMC1 133
-#define CLK_SCLK_MMC2 134
+#define CLK_SCLK_UART0 128
+#define CLK_SCLK_UART1 129
+#define CLK_SCLK_UART2 130
+#define CLK_SCLK_UART3 131
+#define CLK_SCLK_MMC0 132
+#define CLK_SCLK_MMC1 133
+#define CLK_SCLK_MMC2 134
+#define CLK_SCLK_USBD300 150
+#define CLK_SCLK_USBD301 151
+#define CLK_SCLK_USBPHY300 152
+#define CLK_SCLK_USBPHY301 153
+#define CLK_SCLK_PWM 155
/* gate clocks */
-#define CLK_UART0 257
-#define CLK_UART1 258
-#define CLK_UART2 259
-#define CLK_UART3 260
-#define CLK_MCT 315
-#define CLK_MMC0 351
-#define CLK_MMC1 352
-#define CLK_MMC2 353
+#define CLK_UART0 257
+#define CLK_UART1 258
+#define CLK_UART2 259
+#define CLK_I2C0 261
+#define CLK_I2C1 262
+#define CLK_I2C2 263
+#define CLK_I2C3 264
+#define CLK_USI0 265
+#define CLK_USI1 266
+#define CLK_USI2 267
+#define CLK_USI3 268
+#define CLK_UART3 260
+#define CLK_PWM 279
+#define CLK_MCT 315
+#define CLK_WDT 316
+#define CLK_RTC 317
+#define CLK_TMU 318
+#define CLK_MMC0 351
+#define CLK_MMC1 352
+#define CLK_MMC2 353
+#define CLK_USBH20 365
+#define CLK_USBD300 366
+#define CLK_USBD301 367
+#define CLK_SSS 471
-#define CLK_NR_CLKS 512
+#define CLK_NR_CLKS 512
#endif /* _DT_BINDINGS_CLOCK_EXYNOS_5410_H */
--- /dev/null
+/*
+ * Copyright (C) 2016 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7792_H__
+#define __DT_BINDINGS_CLOCK_R8A7792_H__
+
+/* CPG */
+#define R8A7792_CLK_MAIN 0
+#define R8A7792_CLK_PLL0 1
+#define R8A7792_CLK_PLL1 2
+#define R8A7792_CLK_PLL3 3
+#define R8A7792_CLK_LB 4
+#define R8A7792_CLK_QSPI 5
+#define R8A7792_CLK_Z 6
+#define R8A7792_CLK_ADSP 7
+
+/* MSTP0 */
+#define R8A7792_CLK_MSIOF0 0
+
+/* MSTP1 */
+#define R8A7792_CLK_JPU 6
+#define R8A7792_CLK_TMU1 11
+#define R8A7792_CLK_TMU3 21
+#define R8A7792_CLK_TMU2 22
+#define R8A7792_CLK_CMT0 24
+#define R8A7792_CLK_TMU0 25
+#define R8A7792_CLK_VSP1DU1 27
+#define R8A7792_CLK_VSP1DU0 28
+#define R8A7792_CLK_VSP1_SY 31
+
+/* MSTP2 */
+#define R8A7792_CLK_MSIOF1 8
+#define R8A7792_CLK_SYS_DMAC1 18
+#define R8A7792_CLK_SYS_DMAC0 19
+
+/* MSTP3 */
+#define R8A7792_CLK_TPU0 4
+#define R8A7792_CLK_SDHI0 14
+#define R8A7792_CLK_CMT1 29
+
+/* MSTP4 */
+#define R8A7792_CLK_IRQC 7
+
+/* MSTP5 */
+#define R8A7792_CLK_AUDIO_DMAC0 2
+#define R8A7792_CLK_THERMAL 22
+#define R8A7792_CLK_PWM 23
+
+/* MSTP7 */
+#define R8A7792_CLK_HSCIF1 16
+#define R8A7792_CLK_HSCIF0 17
+#define R8A7792_CLK_SCIF3 18
+#define R8A7792_CLK_SCIF2 19
+#define R8A7792_CLK_SCIF1 20
+#define R8A7792_CLK_SCIF0 21
+#define R8A7792_CLK_DU1 23
+#define R8A7792_CLK_DU0 24
+
+/* MSTP8 */
+#define R8A7792_CLK_VIN5 4
+#define R8A7792_CLK_VIN4 5
+#define R8A7792_CLK_VIN3 8
+#define R8A7792_CLK_VIN2 9
+#define R8A7792_CLK_VIN1 10
+#define R8A7792_CLK_VIN0 11
+#define R8A7792_CLK_ETHERAVB 12
+
+/* MSTP9 */
+#define R8A7792_CLK_GPIO7 4
+#define R8A7792_CLK_GPIO6 5
+#define R8A7792_CLK_GPIO5 7
+#define R8A7792_CLK_GPIO4 8
+#define R8A7792_CLK_GPIO3 9
+#define R8A7792_CLK_GPIO2 10
+#define R8A7792_CLK_GPIO1 11
+#define R8A7792_CLK_GPIO0 12
+#define R8A7792_CLK_GPIO11 13
+#define R8A7792_CLK_GPIO10 14
+#define R8A7792_CLK_CAN1 15
+#define R8A7792_CLK_CAN0 16
+#define R8A7792_CLK_QSPI_MOD 17
+#define R8A7792_CLK_GPIO9 19
+#define R8A7792_CLK_GPIO8 21
+#define R8A7792_CLK_I2C5 25
+#define R8A7792_CLK_IICDVFS 26
+#define R8A7792_CLK_I2C4 27
+#define R8A7792_CLK_I2C3 28
+#define R8A7792_CLK_I2C2 29
+#define R8A7792_CLK_I2C1 30
+#define R8A7792_CLK_I2C0 31
+
+/* MSTP10 */
+#define R8A7792_CLK_SSI_ALL 5
+#define R8A7792_CLK_SSI4 11
+#define R8A7792_CLK_SSI3 12
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7792_H__ */
#define R8A7794_CLK_IRQC 7
/* MSTP5 */
-#define R8A7794_CLK_THERMAL 22
#define R8A7794_CLK_PWM 23
/* MSTP7 */
#define SCLK_EMMC_SAMPLE 121
#define SCLK_VOP 122
#define SCLK_HDMI_HDCP 123
+#define SCLK_MAC_SRC 124
+#define SCLK_MAC_EXTCLK 125
+#define SCLK_MAC 126
+#define SCLK_MAC_REFOUT 127
+#define SCLK_MAC_REF 128
+#define SCLK_MAC_RX 129
+#define SCLK_MAC_TX 130
+#define SCLK_MAC_PHY 131
+#define SCLK_MAC_OUT 132
/* dclk gates */
#define DCLK_VOP 190
#define ACLK_DMAC 194
#define ACLK_PERI 210
#define ACLK_VOP 211
+#define ACLK_GMAC 212
/* pclk gates */
#define PCLK_GPIO0 320
#define PCLK_PERI 363
#define PCLK_HDMI_CTRL 364
#define PCLK_HDMI_PHY 365
+#define PCLK_GMAC 367
/* hclk gates */
+#define HCLK_I2S0_8CH 442
+#define HCLK_I2S1_8CH 443
+#define HCLK_I2S2_2CH 444
+#define HCLK_SPDIF_8CH 445
#define HCLK_VOP 452
#define HCLK_NANDC 453
#define HCLK_SDMMC 456
--- /dev/null
+/*
+ * This header provides constants for Keystone pinctrl bindings.
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_KEYSTONE_H
+#define _DT_BINDINGS_PINCTRL_KEYSTONE_H
+
+#define MUX_MODE0 0
+#define MUX_MODE1 1
+#define MUX_MODE2 2
+#define MUX_MODE3 3
+#define MUX_MODE4 4
+#define MUX_MODE5 5
+
+#define BUFFER_CLASS_B (0 << 19)
+#define BUFFER_CLASS_C (1 << 19)
+#define BUFFER_CLASS_D (2 << 19)
+#define BUFFER_CLASS_E (3 << 19)
+
+#define PULL_DISABLE (1 << 16)
+#define PIN_PULLUP (1 << 17)
+#define PIN_PULLDOWN (0 << 17)
+
+#define KEYSTONE_IOPAD_OFFSET(pa, offset) (((pa) & 0xffff) - (offset))
+
+#define K2G_CORE_IOPAD(pa) KEYSTONE_IOPAD_OFFSET((pa), 0x1000)
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2016 Cogent Embedded Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ */
+#ifndef __DT_BINDINGS_POWER_R8A7792_SYSC_H__
+#define __DT_BINDINGS_POWER_R8A7792_SYSC_H__
+
+/*
+ * These power domain indices match the numbers of the interrupt bits
+ * representing the power areas in the various Interrupt Registers
+ * (e.g. SYSCISR, Interrupt Status Register)
+ */
+
+#define R8A7792_PD_CA15_CPU0 0
+#define R8A7792_PD_CA15_CPU1 1
+#define R8A7792_PD_CA15_SCU 12
+#define R8A7792_PD_SGX 20
+#define R8A7792_PD_IMP 24
+
+/* Always-on power area */
+#define R8A7792_PD_ALWAYS_ON 32
+
+#endif /* __DT_BINDINGS_POWER_R8A7792_SYSC_H__ */
unsigned long limit;
unsigned long mm_flags;
loff_t written;
+ loff_t pos;
};
/*
struct workqueue_struct *notify_wq;
};
+static inline bool ceph_osdmap_flag(struct ceph_osd_client *osdc, int flag)
+{
+ return osdc->osdmap->flags & flag;
+}
+
extern int ceph_osdc_setup(void);
extern void ceph_osdc_cleanup(void);
return !ceph_osd_is_up(map, osd);
}
-static inline bool ceph_osdmap_flag(struct ceph_osdmap *map, int flag)
-{
- return map && (map->flags & flag);
-}
-
extern char *ceph_osdmap_state_str(char *str, int len, int state);
extern u32 ceph_get_primary_affinity(struct ceph_osdmap *map, int osd);
#define CLK_SET_PARENT_GATE BIT(1) /* must be gated across re-parent */
#define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */
#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
-#define CLK_IS_ROOT BIT(4) /* Deprecated: Don't use */
+ /* unused */
#define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */
#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */
#define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */
extern int cpuidle_play_dead(void);
extern struct cpuidle_driver *cpuidle_get_cpu_driver(struct cpuidle_device *dev);
+static inline struct cpuidle_device *cpuidle_get_device(void)
+{return __this_cpu_read(cpuidle_devices); }
#else
static inline void disable_cpuidle(void) { }
static inline bool cpuidle_not_available(struct cpuidle_driver *drv,
static inline int cpuidle_play_dead(void) {return -ENODEV; }
static inline struct cpuidle_driver *cpuidle_get_cpu_driver(
struct cpuidle_device *dev) {return NULL; }
+static inline struct cpuidle_device *cpuidle_get_device(void) {return NULL; }
#endif
#if defined(CONFIG_CPU_IDLE) && defined(CONFIG_SUSPEND)
#include <linux/errno.h>
-struct pts_fs_info;
-
#ifdef CONFIG_UNIX98_PTYS
-/* Look up a pts fs info and get a ref to it */
-struct pts_fs_info *devpts_get_ref(struct inode *, struct file *);
-void devpts_put_ref(struct pts_fs_info *);
+struct pts_fs_info;
+
+struct pts_fs_info *devpts_acquire(struct file *);
+void devpts_release(struct pts_fs_info *);
int devpts_new_index(struct pts_fs_info *);
void devpts_kill_index(struct pts_fs_info *, int);
* @file: file pointer used for sharing buffers across, and for refcounting.
* @attachments: list of dma_buf_attachment that denotes all devices attached.
* @ops: dma_buf_ops associated with this buffer object.
+ * @lock: used internally to serialize list manipulation, attach/detach and vmap/unmap
+ * @vmapping_counter: used internally to refcnt the vmaps
+ * @vmap_ptr: the current vmap ptr if vmapping_counter > 0
* @exp_name: name of the exporter; useful for debugging.
* @owner: pointer to exporter module; used for refcounting when exporter is a
* kernel module.
* @list_node: node for dma_buf accounting and debugging.
* @priv: exporter specific private data for this buffer object.
* @resv: reservation object linked to this dma-buf
+ * @poll: for userspace poll support
+ * @cb_excl: for userspace poll support
+ * @cb_shared: for userspace poll support
*/
struct dma_buf {
size_t size;
struct file *file;
struct list_head attachments;
const struct dma_buf_ops *ops;
- /* mutex to serialize list manipulation, attach/detach and vmap/unmap */
struct mutex lock;
unsigned vmapping_counter;
void *vmap_ptr;
/**
* helper macro for exporters; zeros and fills in most common values
+ *
+ * @name: export-info name
*/
-#define DEFINE_DMA_BUF_EXPORT_INFO(a) \
- struct dma_buf_export_info a = { .exp_name = KBUILD_MODNAME, \
+#define DEFINE_DMA_BUF_EXPORT_INFO(name) \
+ struct dma_buf_export_info name = { .exp_name = KBUILD_MODNAME, \
.owner = THIS_MODULE }
/**
/* Iterate through an efi_memory_map */
#define for_each_efi_memory_desc_in_map(m, md) \
for ((md) = (m)->map; \
- (md) <= (efi_memory_desc_t *)((m)->map_end - (m)->desc_size); \
+ ((void *)(md) + (m)->desc_size) <= (m)->map_end; \
(md) = (void *)(md) + (m)->desc_size)
/**
* @timestamp: Timestamp when the fence was signaled.
* @status: Optional, only valid if < 0, must be set before calling
* fence_signal, indicates that the fence has completed with an error.
+ * @child_list: list of children fences
+ * @active_list: list of active fences
*
* the flags member must be manipulated and read using the appropriate
* atomic ops (bit_*), so taking the spinlock will not be needed most
/* check the consistency between the backing cache and the FS-Cache
* cookie */
- bool (*check_consistency)(struct fscache_operation *op);
+ int (*check_consistency)(struct fscache_operation *op);
/* store the updated auxiliary data on an object */
void (*update_object)(struct fscache_object *object);
#define ICC_SGI1R_AFFINITY_1_SHIFT 16
#define ICC_SGI1R_AFFINITY_1_MASK (0xff << ICC_SGI1R_AFFINITY_1_SHIFT)
#define ICC_SGI1R_SGI_ID_SHIFT 24
-#define ICC_SGI1R_SGI_ID_MASK (0xff << ICC_SGI1R_SGI_ID_SHIFT)
+#define ICC_SGI1R_SGI_ID_MASK (0xfULL << ICC_SGI1R_SGI_ID_SHIFT)
#define ICC_SGI1R_AFFINITY_2_SHIFT 32
-#define ICC_SGI1R_AFFINITY_2_MASK (0xffULL << ICC_SGI1R_AFFINITY_1_SHIFT)
+#define ICC_SGI1R_AFFINITY_2_MASK (0xffULL << ICC_SGI1R_AFFINITY_2_SHIFT)
#define ICC_SGI1R_IRQ_ROUTING_MODE_BIT 40
#define ICC_SGI1R_AFFINITY_3_SHIFT 48
-#define ICC_SGI1R_AFFINITY_3_MASK (0xffULL << ICC_SGI1R_AFFINITY_1_SHIFT)
+#define ICC_SGI1R_AFFINITY_3_MASK (0xffULL << ICC_SGI1R_AFFINITY_3_SHIFT)
#include <asm/arch_gicv3.h>
u8 rsvd[8];
};
-#define MLX5_CMD_OP_MAX 0x920
-
enum {
VPORT_STATE_DOWN = 0x0,
VPORT_STATE_UP = 0x1,
#define MLX5_CAP_FLOWTABLE_MAX(mdev, cap) \
MLX5_GET(flow_table_nic_cap, mdev->hca_caps_max[MLX5_CAP_FLOW_TABLE], cap)
+#define MLX5_CAP_FLOWTABLE_NIC_RX(mdev, cap) \
+ MLX5_CAP_FLOWTABLE(mdev, flow_table_properties_nic_receive.cap)
+
+#define MLX5_CAP_FLOWTABLE_NIC_RX_MAX(mdev, cap) \
+ MLX5_CAP_FLOWTABLE_MAX(mdev, flow_table_properties_nic_receive.cap)
+
#define MLX5_CAP_ESW_FLOWTABLE(mdev, cap) \
MLX5_GET(flow_table_eswitch_cap, \
mdev->hca_caps_cur[MLX5_CAP_ESWITCH_FLOW_TABLE], cap)
MLX5_CMD_OP_ALLOC_FLOW_COUNTER = 0x939,
MLX5_CMD_OP_DEALLOC_FLOW_COUNTER = 0x93a,
MLX5_CMD_OP_QUERY_FLOW_COUNTER = 0x93b,
- MLX5_CMD_OP_MODIFY_FLOW_TABLE = 0x93c
+ MLX5_CMD_OP_MODIFY_FLOW_TABLE = 0x93c,
+ MLX5_CMD_OP_MAX
};
struct mlx5_ifc_flow_table_fields_supported_bits {
u8 vport_svlan_insert[0x1];
u8 vport_cvlan_insert_if_not_exist[0x1];
u8 vport_cvlan_insert_overwrite[0x1];
- u8 reserved_at_5[0x1b];
+ u8 reserved_at_5[0x19];
+ u8 nic_vport_node_guid_modify[0x1];
+ u8 nic_vport_port_guid_modify[0x1];
u8 reserved_at_20[0x7e0];
};
};
struct mlx5_ifc_modify_nic_vport_field_select_bits {
- u8 reserved_at_0[0x19];
+ u8 reserved_at_0[0x16];
+ u8 node_guid[0x1];
+ u8 port_guid[0x1];
+ u8 reserved_at_18[0x1];
u8 mtu[0x1];
u8 change_event[0x1];
u8 promisc[0x1];
};
struct mlx5_qp_path {
- u8 fl;
+ u8 fl_free_ar;
u8 rsvd3;
- u8 free_ar;
- u8 pkey_index;
+ __be16 pkey_index;
u8 rsvd0;
u8 grh_mlid;
__be16 rlid;
__be32 optparam;
u8 rsvd0[4];
struct mlx5_qp_context ctx;
+ u8 rsvd2[16];
};
struct mlx5_modify_qp_mbox_out {
int mlx5_query_nic_vport_system_image_guid(struct mlx5_core_dev *mdev,
u64 *system_image_guid);
int mlx5_query_nic_vport_node_guid(struct mlx5_core_dev *mdev, u64 *node_guid);
+int mlx5_modify_nic_vport_node_guid(struct mlx5_core_dev *mdev,
+ u32 vport, u64 node_guid);
int mlx5_query_nic_vport_qkey_viol_cntr(struct mlx5_core_dev *mdev,
u16 *qkey_viol_cntr);
int mlx5_query_hca_vport_gid(struct mlx5_core_dev *dev, u8 other_vport,
#define LOOKUP_ROOT 0x2000
#define LOOKUP_EMPTY 0x4000
+extern int path_pts(struct path *path);
+
extern int user_path_at_empty(int, const char __user *, unsigned, struct path *, int *empty);
static inline int user_path_at(int dfd, const char __user *name, unsigned flags,
return NULL;
}
-static inline int of_parse_phandle_with_args(struct device_node *np,
+static inline int of_parse_phandle_with_args(const struct device_node *np,
const char *list_name,
const char *cells_name,
int index,
struct of_phandle_args;
struct device_node;
-#ifdef CONFIG_OF
+#ifdef CONFIG_OF_PCI
int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq);
struct device_node *of_pci_find_child_device(struct device_node *parent,
unsigned int devfn);
#ifndef __OF_RESERVED_MEM_H
#define __OF_RESERVED_MEM_H
-struct device;
+#include <linux/device.h>
+
struct of_phandle_args;
struct reserved_mem_ops;
_OF_DECLARE(reservedmem, name, compat, init, reservedmem_of_init_fn)
#ifdef CONFIG_OF_RESERVED_MEM
-int of_reserved_mem_device_init(struct device *dev);
+
+int of_reserved_mem_device_init_by_idx(struct device *dev,
+ struct device_node *np, int idx);
void of_reserved_mem_device_release(struct device *dev);
+int early_init_dt_alloc_reserved_memory_arch(phys_addr_t size,
+ phys_addr_t align,
+ phys_addr_t start,
+ phys_addr_t end,
+ bool nomap,
+ phys_addr_t *res_base);
+
void fdt_init_reserved_mem(void);
void fdt_reserved_mem_save_node(unsigned long node, const char *uname,
phys_addr_t base, phys_addr_t size);
#else
-static inline int of_reserved_mem_device_init(struct device *dev)
+static inline int of_reserved_mem_device_init_by_idx(struct device *dev,
+ struct device_node *np, int idx)
{
return -ENOSYS;
}
const char *uname, phys_addr_t base, phys_addr_t size) { }
#endif
+/**
+ * of_reserved_mem_device_init() - assign reserved memory region to given device
+ * @dev: Pointer to the device to configure
+ *
+ * This function assigns respective DMA-mapping operations based on the first
+ * reserved memory region specified by 'memory-region' property in device tree
+ * node of the given device.
+ *
+ * Returns error code or zero on success.
+ */
+static inline int of_reserved_mem_device_init(struct device *dev)
+{
+ return of_reserved_mem_device_init_by_idx(dev, dev->of_node, 0);
+}
+
#endif /* __OF_RESERVED_MEM_H */
static inline bool page_is_young(struct page *page)
{
- return test_bit(PAGE_EXT_YOUNG, &lookup_page_ext(page)->flags);
+ struct page_ext *page_ext = lookup_page_ext(page);
+
+ if (unlikely(!page_ext))
+ return false;
+
+ return test_bit(PAGE_EXT_YOUNG, &page_ext->flags);
}
static inline void set_page_young(struct page *page)
{
- set_bit(PAGE_EXT_YOUNG, &lookup_page_ext(page)->flags);
+ struct page_ext *page_ext = lookup_page_ext(page);
+
+ if (unlikely(!page_ext))
+ return;
+
+ set_bit(PAGE_EXT_YOUNG, &page_ext->flags);
}
static inline bool test_and_clear_page_young(struct page *page)
{
- return test_and_clear_bit(PAGE_EXT_YOUNG,
- &lookup_page_ext(page)->flags);
+ struct page_ext *page_ext = lookup_page_ext(page);
+
+ if (unlikely(!page_ext))
+ return false;
+
+ return test_and_clear_bit(PAGE_EXT_YOUNG, &page_ext->flags);
}
static inline bool page_is_idle(struct page *page)
{
- return test_bit(PAGE_EXT_IDLE, &lookup_page_ext(page)->flags);
+ struct page_ext *page_ext = lookup_page_ext(page);
+
+ if (unlikely(!page_ext))
+ return false;
+
+ return test_bit(PAGE_EXT_IDLE, &page_ext->flags);
}
static inline void set_page_idle(struct page *page)
{
- set_bit(PAGE_EXT_IDLE, &lookup_page_ext(page)->flags);
+ struct page_ext *page_ext = lookup_page_ext(page);
+
+ if (unlikely(!page_ext))
+ return;
+
+ set_bit(PAGE_EXT_IDLE, &page_ext->flags);
}
static inline void clear_page_idle(struct page *page)
{
- clear_bit(PAGE_EXT_IDLE, &lookup_page_ext(page)->flags);
+ struct page_ext *page_ext = lookup_page_ext(page);
+
+ if (unlikely(!page_ext))
+ return;
+
+ clear_bit(PAGE_EXT_IDLE, &page_ext->flags);
}
#endif /* CONFIG_64BIT */
extern struct lock_class_key reservation_seqcount_class;
extern const char reservation_seqcount_string[];
+/**
+ * struct reservation_object_list - a list of shared fences
+ * @rcu: for internal use
+ * @shared_count: table of shared fences
+ * @shared_max: for growing shared fence table
+ * @shared: shared fence table
+ */
struct reservation_object_list {
struct rcu_head rcu;
u32 shared_count, shared_max;
struct fence __rcu *shared[];
};
+/**
+ * struct reservation_object - a reservation object manages fences for a buffer
+ * @lock: update side lock
+ * @seq: sequence count for managing RCU read-side synchronization
+ * @fence_excl: the exclusive fence, if there is one currently
+ * @fence: list of current shared fences
+ * @staged: staged copy of shared fences for RCU updates
+ */
struct reservation_object {
struct ww_mutex lock;
seqcount_t seq;
#define reservation_object_assert_held(obj) \
lockdep_assert_held(&(obj)->lock.base)
+/**
+ * reservation_object_init - initialize a reservation object
+ * @obj: the reservation object
+ */
static inline void
reservation_object_init(struct reservation_object *obj)
{
obj->staged = NULL;
}
+/**
+ * reservation_object_fini - destroys a reservation object
+ * @obj: the reservation object
+ */
static inline void
reservation_object_fini(struct reservation_object *obj)
{
ww_mutex_destroy(&obj->lock);
}
+/**
+ * reservation_object_get_list - get the reservation object's
+ * shared fence list, with update-side lock held
+ * @obj: the reservation object
+ *
+ * Returns the shared fence list. Does NOT take references to
+ * the fence. The obj->lock must be held.
+ */
static inline struct reservation_object_list *
reservation_object_get_list(struct reservation_object *obj)
{
reservation_object_held(obj));
}
+/**
+ * reservation_object_get_excl - get the reservation object's
+ * exclusive fence, with update-side lock held
+ * @obj: the reservation object
+ *
+ * Returns the exclusive fence (if any). Does NOT take a
+ * reference. The obj->lock must be held.
+ *
+ * RETURNS
+ * The exclusive fence or NULL
+ */
static inline struct fence *
reservation_object_get_excl(struct reservation_object *obj)
{
reservation_object_held(obj));
}
+/**
+ * reservation_object_get_excl_rcu - get the reservation object's
+ * exclusive fence, without lock held.
+ * @obj: the reservation object
+ *
+ * If there is an exclusive fence, this atomically increments it's
+ * reference count and returns it.
+ *
+ * RETURNS
+ * The exclusive fence or NULL if none
+ */
static inline struct fence *
reservation_object_get_excl_rcu(struct reservation_object *obj)
{
__u8 sctpi_s_disable_fragments;
__u8 sctpi_s_v4mapped;
__u8 sctpi_s_frag_interleave;
+ __u32 sctpi_s_type;
+ __u32 __reserved3;
};
struct sctp_infox {
static inline int raw_read_seqcount_latch(seqcount_t *s)
{
- return lockless_dereference(s)->sequence;
+ int seq = READ_ONCE(s->sequence);
+ /* Pairs with the first smp_wmb() in raw_write_seqcount_latch() */
+ smp_read_barrier_depends();
+ return seq;
}
/**
* unsigned seq, idx;
*
* do {
- * seq = lockless_dereference(latch)->seq;
+ * seq = raw_read_seqcount_latch(&latch->seq);
*
* idx = seq & 0x01;
* entry = data_query(latch->data[idx], ...);
* @get_trend: a pointer to a function that reads the sensor temperature trend.
* @set_emul_temp: a pointer to a function that sets sensor emulated
* temperature.
+ * @set_trip_temp: a pointer to a function that sets the trip temperature on
+ * hardware.
*/
struct thermal_zone_of_device_ops {
int (*get_temp)(void *, int *);
struct timespec64 ts64;
if (!tv)
+ return do_sys_settimeofday64(NULL, tz);
+
+ if (!timespec_valid(tv))
return -EINVAL;
ts64 = timespec_to_timespec64(*tv);
}
void vb2_dma_contig_cleanup_ctx(void *alloc_ctx);
+int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size);
+void vb2_dma_contig_clear_max_seg_size(struct device *dev);
extern const struct vb2_mem_ops vb2_dma_contig_memops;
int get_compat_msghdr(struct msghdr *, struct compat_msghdr __user *,
struct sockaddr __user **, struct iovec **);
+struct sock_fprog __user *get_compat_bpf_fprog(char __user *optval);
asmlinkage long compat_sys_sendmsg(int, struct compat_msghdr __user *,
unsigned int);
asmlinkage long compat_sys_sendmmsg(int, struct compat_mmsghdr __user *,
u8 *protocol, struct flowi6 *fl6);
};
+#ifdef CONFIG_INET
+
extern const struct ip6_tnl_encap_ops __rcu *
ip6tun_encaps[MAX_IPTUN_ENCAP_OPS];
int ip6_tnl_get_iflink(const struct net_device *dev);
int ip6_tnl_change_mtu(struct net_device *dev, int new_mtu);
-#ifdef CONFIG_INET
static inline void ip6tunnel_xmit(struct sock *sk, struct sk_buff *skb,
struct net_device *dev)
{
const char *ip_vs_state_name(__u16 proto, int state);
void ip_vs_tcp_conn_listen(struct ip_vs_conn *cp);
-int ip_vs_check_template(struct ip_vs_conn *ct);
+int ip_vs_check_template(struct ip_vs_conn *ct, struct ip_vs_dest *cdest);
void ip_vs_random_dropentry(struct netns_ipvs *ipvs);
int ip_vs_conn_init(void);
void ip_vs_conn_cleanup(void);
struct nf_hook_ops *ops);
};
-void nf_register_queue_handler(const struct nf_queue_handler *qh);
-void nf_unregister_queue_handler(void);
+void nf_register_queue_handler(struct net *net, const struct nf_queue_handler *qh);
+void nf_unregister_queue_handler(struct net *net);
void nf_reinject(struct nf_queue_entry *entry, unsigned int verdict);
void nf_queue_entry_get_refs(struct nf_queue_entry *entry);
struct proc_dir_entry;
struct nf_logger;
+struct nf_queue_handler;
struct netns_nf {
#if defined CONFIG_PROC_FS
struct proc_dir_entry *proc_netfilter;
#endif
+ const struct nf_queue_handler __rcu *queue_handler;
const struct nf_logger __rcu *nf_loggers[NFPROTO_NUMPROTO];
#ifdef CONFIG_SYSCTL
struct ctl_table_header *nf_log_dir_header;
};
};
-static inline bool tc_should_offload(struct net_device *dev, u32 flags)
+static inline bool tc_should_offload(const struct net_device *dev,
+ const struct tcf_proto *tp, u32 flags)
{
+ const struct Qdisc *sch = tp->q;
+ const struct Qdisc_class_ops *cops = sch->ops->cl_ops;
+
if (!(dev->features & NETIF_F_HW_TC))
return false;
-
if (flags & TCA_CLS_FLAGS_SKIP_HW)
return false;
-
if (!dev->netdev_ops->ndo_setup_tc)
return false;
+ if (cops && cops->tcf_cl_offload)
+ return cops->tcf_cl_offload(tp->classid);
return true;
}
}
struct qdisc_watchdog {
+ u64 last_expires;
struct hrtimer timer;
struct Qdisc *qdisc;
};
/* Filter manipulation */
struct tcf_proto __rcu ** (*tcf_chain)(struct Qdisc *, unsigned long);
+ bool (*tcf_cl_offload)(u32 classid);
unsigned long (*bind_tcf)(struct Qdisc *, unsigned long,
u32 classid);
void (*unbind_tcf)(struct Qdisc *, unsigned long);
/* we can reuse ->gso_skb because peek isn't called for root qdiscs */
if (!sch->gso_skb) {
sch->gso_skb = sch->dequeue(sch);
- if (sch->gso_skb)
+ if (sch->gso_skb) {
/* it's still part of the queue */
+ qdisc_qstats_backlog_inc(sch, sch->gso_skb);
sch->q.qlen++;
+ }
}
return sch->gso_skb;
if (skb) {
sch->gso_skb = NULL;
+ qdisc_qstats_backlog_dec(sch, skb);
sch->q.qlen--;
} else {
skb = sch->dequeue(sch);
IB_DEVICE_CROSS_CHANNEL = (1 << 27),
IB_DEVICE_MANAGED_FLOW_STEERING = (1 << 29),
IB_DEVICE_SIGNATURE_HANDOVER = (1 << 30),
- IB_DEVICE_ON_DEMAND_PAGING = (1 << 31),
+ IB_DEVICE_ON_DEMAND_PAGING = (1ULL << 31),
IB_DEVICE_SG_GAPS_REG = (1ULL << 32),
- IB_DEVICE_VIRTUAL_FUNCTION = ((u64)1 << 33),
- IB_DEVICE_RAW_SCATTER_FCS = ((u64)1 << 34),
+ IB_DEVICE_VIRTUAL_FUNCTION = (1ULL << 33),
+ IB_DEVICE_RAW_SCATTER_FCS = (1ULL << 34),
};
enum ib_signature_prot_cap {
};
union {
char name[BTRFS_SUBVOL_NAME_MAX + 1];
- u64 devid;
+ __u64 devid;
};
};
ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT = 28,
ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT = 29,
ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT = 30,
+ ETHTOOL_LINK_MODE_25000baseCR_Full_BIT = 31,
+ ETHTOOL_LINK_MODE_25000baseKR_Full_BIT = 32,
+ ETHTOOL_LINK_MODE_25000baseSR_Full_BIT = 33,
+ ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT = 34,
+ ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT = 35,
+ ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT = 36,
+ ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT = 37,
+ ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT = 38,
+ ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT = 39,
/* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
* 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
*/
__ETHTOOL_LINK_MODE_LAST
- = ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT,
+ = ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT,
};
#define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \
#ifndef _UAPI_LINUX_GTP_H_
-#define _UAPI_LINUX_GTP_H__
+#define _UAPI_LINUX_GTP_H_
enum gtp_genl_cmds {
GTP_CMD_NEWPDP,
TCA_POLICE_PEAKRATE,
TCA_POLICE_AVRATE,
TCA_POLICE_RESULT,
+ TCA_POLICE_TM,
+ TCA_POLICE_PAD,
__TCA_POLICE_MAX
#define TCA_POLICE_RESULT TCA_POLICE_RESULT
};
TCA_U32_DIVISOR,
TCA_U32_SEL,
TCA_U32_POLICE,
- TCA_U32_ACT,
+ TCA_U32_ACT,
TCA_U32_INDEV,
TCA_U32_PCNT,
TCA_U32_MARK,
# UAPI Header export list
header-y += asequencer.h
+header-y += asoc.h
header-y += asound.h
header-y += asound_fm.h
header-y += compress_offload.h
header-y += hdspm.h
header-y += sb16_csp.h
header-y += sfnt_info.h
+header-y += tlv.h
+header-y += usb_stream.h
.name = "bpf",
.mount = bpf_mount,
.kill_sb = kill_litter_super,
- .fs_flags = FS_USERNS_MOUNT,
};
MODULE_ALIAS_FS("bpf");
if (event->ctx)
put_ctx(event->ctx);
- if (event->pmu) {
- exclusive_event_destroy(event);
- module_put(event->pmu->module);
- }
+ exclusive_event_destroy(event);
+ module_put(event->pmu->module);
call_rcu(&event->rcu_head, free_event_rcu);
}
{
unsigned long address = (unsigned long)uaddr;
struct mm_struct *mm = current->mm;
- struct page *page;
+ struct page *page, *tail;
struct address_space *mapping;
int err, ro = 0;
* considered here and page lock forces unnecessarily serialization
* From this point on, mapping will be re-verified if necessary and
* page lock will be acquired only if it is unavoidable
- */
+ *
+ * Mapping checks require the head page for any compound page so the
+ * head page and mapping is looked up now. For anonymous pages, it
+ * does not matter if the page splits in the future as the key is
+ * based on the address. For filesystem-backed pages, the tail is
+ * required as the index of the page determines the key. For
+ * base pages, there is no tail page and tail == page.
+ */
+ tail = page;
page = compound_head(page);
mapping = READ_ONCE(page->mapping);
key->both.offset |= FUT_OFF_INODE; /* inode-based key */
key->shared.inode = inode;
- key->shared.pgoff = basepage_index(page);
+ key->shared.pgoff = basepage_index(tail);
rcu_read_unlock();
}
domain = data->domain;
if (WARN_ON(domain == NULL))
- return;
+ return -EINVAL;
if (!irq_domain_is_ipi(domain)) {
pr_warn("Trying to destroy a non IPI domain!\n");
if (!hold_ctx)
return 0;
- if (unlikely(ctx == hold_ctx))
- return -EALREADY;
-
if (ctx->stamp - hold_ctx->stamp <= LONG_MAX &&
(ctx->stamp != hold_ctx->stamp || ctx > hold_ctx)) {
#ifdef CONFIG_DEBUG_MUTEXES
unsigned long flags;
int ret;
+ if (use_ww_ctx) {
+ struct ww_mutex *ww = container_of(lock, struct ww_mutex, base);
+ if (unlikely(ww_ctx == READ_ONCE(ww->ctx)))
+ return -EALREADY;
+ }
+
preempt_disable();
mutex_acquire_nest(&lock->dep_map, subclass, 0, nest_lock, ip);
#define queued_spin_lock_slowpath native_queued_spin_lock_slowpath
#endif
+/*
+ * queued_spin_lock_slowpath() can (load-)ACQUIRE the lock before
+ * issuing an _unordered_ store to set _Q_LOCKED_VAL.
+ *
+ * This means that the store can be delayed, but no later than the
+ * store-release from the unlock. This means that simply observing
+ * _Q_LOCKED_VAL is not sufficient to determine if the lock is acquired.
+ *
+ * There are two paths that can issue the unordered store:
+ *
+ * (1) clear_pending_set_locked(): *,1,0 -> *,0,1
+ *
+ * (2) set_locked(): t,0,0 -> t,0,1 ; t != 0
+ * atomic_cmpxchg_relaxed(): t,0,0 -> 0,0,1
+ *
+ * However, in both cases we have other !0 state we've set before to queue
+ * ourseves:
+ *
+ * For (1) we have the atomic_cmpxchg_acquire() that set _Q_PENDING_VAL, our
+ * load is constrained by that ACQUIRE to not pass before that, and thus must
+ * observe the store.
+ *
+ * For (2) we have a more intersting scenario. We enqueue ourselves using
+ * xchg_tail(), which ends up being a RELEASE. This in itself is not
+ * sufficient, however that is followed by an smp_cond_acquire() on the same
+ * word, giving a RELEASE->ACQUIRE ordering. This again constrains our load and
+ * guarantees we must observe that store.
+ *
+ * Therefore both cases have other !0 state that is observable before the
+ * unordered locked byte store comes through. This means we can use that to
+ * wait for the lock store, and then wait for an unlock.
+ */
+#ifndef queued_spin_unlock_wait
+void queued_spin_unlock_wait(struct qspinlock *lock)
+{
+ u32 val;
+
+ for (;;) {
+ val = atomic_read(&lock->val);
+
+ if (!val) /* not locked, we're done */
+ goto done;
+
+ if (val & _Q_LOCKED_MASK) /* locked, go wait for unlock */
+ break;
+
+ /* not locked, but pending, wait until we observe the lock */
+ cpu_relax();
+ }
+
+ /* any unlock is good */
+ while (atomic_read(&lock->val) & _Q_LOCKED_MASK)
+ cpu_relax();
+
+done:
+ smp_rmb(); /* CTRL + RMB -> ACQUIRE */
+}
+EXPORT_SYMBOL(queued_spin_unlock_wait);
+#endif
+
#endif /* _GEN_PV_LOCK_SLOWPATH */
/**
kref_put(&chan->kref, relay_destroy_channel);
mutex_unlock(&relay_channels_mutex);
+ kfree(chan);
return NULL;
}
EXPORT_SYMBOL_GPL(relay_open);
#endif
#endif
+#ifdef CONFIG_SCHEDSTATS
+
DEFINE_STATIC_KEY_FALSE(sched_schedstats);
+static bool __initdata __sched_schedstats = false;
-#ifdef CONFIG_SCHEDSTATS
static void set_schedstats(bool enabled)
{
if (enabled)
if (!str)
goto out;
+ /*
+ * This code is called before jump labels have been set up, so we can't
+ * change the static branch directly just yet. Instead set a temporary
+ * variable so init_schedstats() can do it later.
+ */
if (!strcmp(str, "enable")) {
- set_schedstats(true);
+ __sched_schedstats = true;
ret = 1;
} else if (!strcmp(str, "disable")) {
- set_schedstats(false);
+ __sched_schedstats = false;
ret = 1;
}
out:
}
__setup("schedstats=", setup_schedstats);
+static void __init init_schedstats(void)
+{
+ set_schedstats(__sched_schedstats);
+}
+
#ifdef CONFIG_PROC_SYSCTL
int sysctl_schedstats(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
set_schedstats(state);
return err;
}
-#endif
-#endif
+#endif /* CONFIG_PROC_SYSCTL */
+#else /* !CONFIG_SCHEDSTATS */
+static inline void init_schedstats(void) {}
+#endif /* CONFIG_SCHEDSTATS */
/*
* fork()/clone()-time setup:
static inline void schedule_debug(struct task_struct *prev)
{
#ifdef CONFIG_SCHED_STACK_END_CHECK
- BUG_ON(task_stack_end_corrupted(prev));
+ if (task_stack_end_corrupted(prev))
+ panic("corrupted stack end detected inside scheduler\n");
#endif
if (unlikely(in_atomic_preempt_off())) {
#endif
init_sched_fair_class();
+ init_schedstats();
+
scheduler_running = 1;
}
SPLIT_NS(p->se.vruntime),
(long long)(p->nvcsw + p->nivcsw),
p->prio);
-#ifdef CONFIG_SCHEDSTATS
- if (schedstat_enabled()) {
- SEQ_printf(m, "%9Ld.%06ld %9Ld.%06ld %9Ld.%06ld",
- SPLIT_NS(p->se.statistics.wait_sum),
- SPLIT_NS(p->se.sum_exec_runtime),
- SPLIT_NS(p->se.statistics.sum_sleep_runtime));
- }
-#else
+
SEQ_printf(m, "%9Ld.%06ld %9Ld.%06ld %9Ld.%06ld",
- 0LL, 0L,
+ SPLIT_NS(schedstat_val(p, se.statistics.wait_sum)),
SPLIT_NS(p->se.sum_exec_runtime),
- 0LL, 0L);
-#endif
+ SPLIT_NS(schedstat_val(p, se.statistics.sum_sleep_runtime)));
+
#ifdef CONFIG_NUMA_BALANCING
SEQ_printf(m, " %d %d", task_node(p), task_numa_group_id(p));
#endif
*/
static void cpuidle_idle_call(void)
{
- struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
+ struct cpuidle_device *dev = cpuidle_get_device();
struct cpuidle_driver *drv = cpuidle_get_cpu_driver(dev);
int next_state, entered_state;
# define schedstat_inc(rq, field) do { if (schedstat_enabled()) { (rq)->field++; } } while (0)
# define schedstat_add(rq, field, amt) do { if (schedstat_enabled()) { (rq)->field += (amt); } } while (0)
# define schedstat_set(var, val) do { if (schedstat_enabled()) { var = (val); } } while (0)
+# define schedstat_val(rq, field) ((schedstat_enabled()) ? (rq)->field : 0)
+
#else /* !CONFIG_SCHEDSTATS */
static inline void
rq_sched_info_arrive(struct rq *rq, unsigned long long delta)
# define schedstat_inc(rq, field) do { } while (0)
# define schedstat_add(rq, field, amt) do { } while (0)
# define schedstat_set(var, val) do { } while (0)
+# define schedstat_val(rq, field) 0
#endif
#ifdef CONFIG_SCHED_INFO
{
debug_object_free(timer, &hrtimer_debug_descr);
}
+EXPORT_SYMBOL_GPL(destroy_hrtimer_on_stack);
#else
static inline void debug_hrtimer_init(struct hrtimer *timer) { }
if (unlikely(index >= array->map.max_entries))
return -E2BIG;
- file = (struct file *)array->ptrs[index];
+ file = READ_ONCE(array->ptrs[index]);
if (unlikely(!file))
return -ENOENT;
if (unlikely(index >= array->map.max_entries))
return -E2BIG;
- file = (struct file *)array->ptrs[index];
+ file = READ_ONCE(array->ptrs[index]);
if (unlikely(!file))
return -ENOENT;
If unsure, say N.
+config TEST_UUID
+ tristate "Test functions located in the uuid module at runtime"
+
config TEST_RHASHTABLE
tristate "Perform selftest on resizable hash table"
default n
obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o
obj-$(CONFIG_TEST_PRINTF) += test_printf.o
obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
+obj-$(CONFIG_TEST_UUID) += test_uuid.o
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
--- /dev/null
+/*
+ * Test cases for lib/uuid.c module.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/uuid.h>
+
+struct test_uuid_data {
+ const char *uuid;
+ uuid_le le;
+ uuid_be be;
+};
+
+static const struct test_uuid_data test_uuid_test_data[] = {
+ {
+ .uuid = "c33f4995-3701-450e-9fbf-206a2e98e576",
+ .le = UUID_LE(0xc33f4995, 0x3701, 0x450e, 0x9f, 0xbf, 0x20, 0x6a, 0x2e, 0x98, 0xe5, 0x76),
+ .be = UUID_BE(0xc33f4995, 0x3701, 0x450e, 0x9f, 0xbf, 0x20, 0x6a, 0x2e, 0x98, 0xe5, 0x76),
+ },
+ {
+ .uuid = "64b4371c-77c1-48f9-8221-29f054fc023b",
+ .le = UUID_LE(0x64b4371c, 0x77c1, 0x48f9, 0x82, 0x21, 0x29, 0xf0, 0x54, 0xfc, 0x02, 0x3b),
+ .be = UUID_BE(0x64b4371c, 0x77c1, 0x48f9, 0x82, 0x21, 0x29, 0xf0, 0x54, 0xfc, 0x02, 0x3b),
+ },
+ {
+ .uuid = "0cb4ddff-a545-4401-9d06-688af53e7f84",
+ .le = UUID_LE(0x0cb4ddff, 0xa545, 0x4401, 0x9d, 0x06, 0x68, 0x8a, 0xf5, 0x3e, 0x7f, 0x84),
+ .be = UUID_BE(0x0cb4ddff, 0xa545, 0x4401, 0x9d, 0x06, 0x68, 0x8a, 0xf5, 0x3e, 0x7f, 0x84),
+ },
+};
+
+static const char * const test_uuid_wrong_data[] = {
+ "c33f4995-3701-450e-9fbf206a2e98e576 ", /* no hyphen(s) */
+ "64b4371c-77c1-48f9-8221-29f054XX023b", /* invalid character(s) */
+ "0cb4ddff-a545-4401-9d06-688af53e", /* not enough data */
+};
+
+static unsigned total_tests __initdata;
+static unsigned failed_tests __initdata;
+
+static void __init test_uuid_failed(const char *prefix, bool wrong, bool be,
+ const char *data, const char *actual)
+{
+ pr_err("%s test #%u %s %s data: '%s'\n",
+ prefix,
+ total_tests,
+ wrong ? "passed on wrong" : "failed on",
+ be ? "BE" : "LE",
+ data);
+ if (actual && *actual)
+ pr_err("%s test #%u actual data: '%s'\n",
+ prefix,
+ total_tests,
+ actual);
+ failed_tests++;
+}
+
+static void __init test_uuid_test(const struct test_uuid_data *data)
+{
+ uuid_le le;
+ uuid_be be;
+ char buf[48];
+
+ /* LE */
+ total_tests++;
+ if (uuid_le_to_bin(data->uuid, &le))
+ test_uuid_failed("conversion", false, false, data->uuid, NULL);
+
+ total_tests++;
+ if (uuid_le_cmp(data->le, le)) {
+ sprintf(buf, "%pUl", &le);
+ test_uuid_failed("cmp", false, false, data->uuid, buf);
+ }
+
+ /* BE */
+ total_tests++;
+ if (uuid_be_to_bin(data->uuid, &be))
+ test_uuid_failed("conversion", false, true, data->uuid, NULL);
+
+ total_tests++;
+ if (uuid_be_cmp(data->be, be)) {
+ sprintf(buf, "%pUb", &be);
+ test_uuid_failed("cmp", false, true, data->uuid, buf);
+ }
+}
+
+static void __init test_uuid_wrong(const char *data)
+{
+ uuid_le le;
+ uuid_be be;
+
+ /* LE */
+ total_tests++;
+ if (!uuid_le_to_bin(data, &le))
+ test_uuid_failed("negative", true, false, data, NULL);
+
+ /* BE */
+ total_tests++;
+ if (!uuid_be_to_bin(data, &be))
+ test_uuid_failed("negative", true, true, data, NULL);
+}
+
+static int __init test_uuid_init(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(test_uuid_test_data); i++)
+ test_uuid_test(&test_uuid_test_data[i]);
+
+ for (i = 0; i < ARRAY_SIZE(test_uuid_wrong_data); i++)
+ test_uuid_wrong(test_uuid_wrong_data[i]);
+
+ if (failed_tests == 0)
+ pr_info("all %u tests passed\n", total_tests);
+ else
+ pr_err("failed %u out of %u tests\n", failed_tests, total_tests);
+
+ return failed_tests ? -EINVAL : 0;
+}
+module_init(test_uuid_init);
+
+static void __exit test_uuid_exit(void)
+{
+ /* do nothing */
+}
+module_exit(test_uuid_exit);
+
+MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>");
+MODULE_LICENSE("Dual BSD/GPL");
return -EINVAL;
for (i = 0; i < 16; i++) {
- int hi = hex_to_bin(uuid[si[i]] + 0);
- int lo = hex_to_bin(uuid[si[i]] + 1);
+ int hi = hex_to_bin(uuid[si[i] + 0]);
+ int lo = hex_to_bin(uuid[si[i] + 1]);
b[ei[i]] = (hi << 4) | lo;
}
*/
start_index = (offset+(PAGE_SIZE-1)) >> PAGE_SHIFT;
end_index = (endbyte >> PAGE_SHIFT);
+ if ((endbyte & ~PAGE_MASK) != ~PAGE_MASK) {
+ /* First page is tricky as 0 - 1 = -1, but pgoff_t
+ * is unsigned, so the end_index >= start_index
+ * check below would be true and we'll discard the whole
+ * file cache which is not what was asked.
+ */
+ if (end_index == 0)
+ break;
+
+ end_index--;
+ }
if (end_index >= start_index) {
unsigned long count = invalidate_mapping_pages(mapping,
* Only the process that called mmap() has reserves for
* private mappings.
*/
- if (is_vma_resv_set(vma, HPAGE_RESV_OWNER))
- return true;
+ if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
+ /*
+ * Like the shared case above, a hole punch or truncate
+ * could have been performed on the private mapping.
+ * Examine the value of chg to determine if reserves
+ * actually exist or were previously consumed.
+ * Very Subtle - The value of chg comes from a previous
+ * call to vma_needs_reserves(). The reserve map for
+ * private mappings has different (opposite) semantics
+ * than that of shared mappings. vma_needs_reserves()
+ * has already taken this difference in semantics into
+ * account. Therefore, the meaning of chg is the same
+ * as in the shared case above. Code could easily be
+ * combined, but keeping it separate draws attention to
+ * subtle differences.
+ */
+ if (chg)
+ return false;
+ else
+ return true;
+ }
return false;
}
if (vma->vm_flags & VM_MAYSHARE)
return ret;
+ else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER) && ret >= 0) {
+ /*
+ * In most cases, reserves always exist for private mappings.
+ * However, a file associated with mapping could have been
+ * hole punched or truncated after reserves were consumed.
+ * As subsequent fault on such a range will not use reserves.
+ * Subtle - The reserve map for private mappings has the
+ * opposite meaning than that of shared mappings. If NO
+ * entry is in the reserve map, it means a reservation exists.
+ * If an entry exists in the reserve map, it means the
+ * reservation has already been consumed. As a result, the
+ * return value of this routine is the opposite of the
+ * value returned from reserve map manipulation routines above.
+ */
+ if (ret)
+ return 0;
+ else
+ return 1;
+ }
else
return ret < 0 ? ret : 0;
}
static int __init kasan_memhotplug_init(void)
{
- pr_err("WARNING: KASAN doesn't support memory hot-add\n");
- pr_err("Memory hot-add will be disabled\n");
+ pr_info("WARNING: KASAN doesn't support memory hot-add\n");
+ pr_info("Memory hot-add will be disabled\n");
hotplug_memory_notifier(kasan_mem_notifier, 0);
static void mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int order)
{
- if (!current->memcg_may_oom || current->memcg_in_oom)
+ if (!current->memcg_may_oom)
return;
/*
* We are in the middle of the charge context here, so we
* ordering is imposed by list_lru_node->lock taken by
* memcg_drain_all_list_lrus().
*/
+ rcu_read_lock(); /* can be called from css_free w/o cgroup_mutex */
css_for_each_descendant_pre(css, &memcg->css) {
child = mem_cgroup_from_css(css);
BUG_ON(child->kmemcg_id != kmemcg_id);
if (!memcg->use_hierarchy)
break;
}
+ rcu_read_unlock();
+
memcg_drain_all_list_lrus(kmemcg_id, parent->kmemcg_id);
memcg_free_cache_id(kmemcg_id);
if (atomic_read(&mm->mm_users) > 1) {
rcu_read_lock();
for_each_process(p) {
- bool exiting;
-
if (!process_shares_mm(p, mm))
continue;
if (fatal_signal_pending(p))
* If the task is exiting make sure the whole thread group
* is exiting and cannot acces mm anymore.
*/
- spin_lock_irq(&p->sighand->siglock);
- exiting = signal_group_exit(p->signal);
- spin_unlock_irq(&p->sighand->siglock);
- if (exiting)
+ if (signal_group_exit(p->signal))
continue;
/* Give up */
struct dirty_throttle_control *gdtc = mdtc_gdtc(dtc);
unsigned long bytes = vm_dirty_bytes;
unsigned long bg_bytes = dirty_background_bytes;
- unsigned long ratio = vm_dirty_ratio;
- unsigned long bg_ratio = dirty_background_ratio;
+ /* convert ratios to per-PAGE_SIZE for higher precision */
+ unsigned long ratio = (vm_dirty_ratio * PAGE_SIZE) / 100;
+ unsigned long bg_ratio = (dirty_background_ratio * PAGE_SIZE) / 100;
unsigned long thresh;
unsigned long bg_thresh;
struct task_struct *tsk;
/*
* The byte settings can't be applied directly to memcg
* domains. Convert them to ratios by scaling against
- * globally available memory.
+ * globally available memory. As the ratios are in
+ * per-PAGE_SIZE, they can be obtained by dividing bytes by
+ * number of pages.
*/
if (bytes)
- ratio = min(DIV_ROUND_UP(bytes, PAGE_SIZE) * 100 /
- global_avail, 100UL);
+ ratio = min(DIV_ROUND_UP(bytes, global_avail),
+ PAGE_SIZE);
if (bg_bytes)
- bg_ratio = min(DIV_ROUND_UP(bg_bytes, PAGE_SIZE) * 100 /
- global_avail, 100UL);
+ bg_ratio = min(DIV_ROUND_UP(bg_bytes, global_avail),
+ PAGE_SIZE);
bytes = bg_bytes = 0;
}
if (bytes)
thresh = DIV_ROUND_UP(bytes, PAGE_SIZE);
else
- thresh = (ratio * available_memory) / 100;
+ thresh = (ratio * available_memory) / PAGE_SIZE;
if (bg_bytes)
bg_thresh = DIV_ROUND_UP(bg_bytes, PAGE_SIZE);
else
- bg_thresh = (bg_ratio * available_memory) / 100;
+ bg_thresh = (bg_ratio * available_memory) / PAGE_SIZE;
if (bg_thresh >= thresh)
bg_thresh = thresh / 2;
return;
page_ext = lookup_page_ext(page);
+ if (unlikely(!page_ext))
+ return;
+
__set_bit(PAGE_EXT_DEBUG_GUARD, &page_ext->flags);
INIT_LIST_HEAD(&page->lru);
return;
page_ext = lookup_page_ext(page);
+ if (unlikely(!page_ext))
+ return;
+
__clear_bit(PAGE_EXT_DEBUG_GUARD, &page_ext->flags);
set_page_private(page, 0);
page = list_last_entry(list, struct page, lru);
else
page = list_first_entry(list, struct page, lru);
- } while (page && check_new_pcp(page));
- __dec_zone_state(zone, NR_ALLOC_BATCH);
- list_del(&page->lru);
- pcp->count--;
+ __dec_zone_state(zone, NR_ALLOC_BATCH);
+ list_del(&page->lru);
+ pcp->count--;
+
+ } while (check_new_pcp(page));
} else {
/*
* We most definitely don't want callers attempting to
apply_fair = false;
fair_skipped = false;
reset_alloc_batches(ac->preferred_zoneref->zone);
+ z = ac->preferred_zoneref;
goto zonelist_scan;
}
*/
alloc_flags = gfp_to_alloc_flags(gfp_mask);
+ /*
+ * Reset the zonelist iterators if memory policies can be ignored.
+ * These allocations are high priority and system rather than user
+ * orientated.
+ */
+ if ((alloc_flags & ALLOC_NO_WATERMARKS) || !(alloc_flags & ALLOC_CPUSET)) {
+ ac->zonelist = node_zonelist(numa_node_id(), gfp_mask);
+ ac->preferred_zoneref = first_zones_zonelist(ac->zonelist,
+ ac->high_zoneidx, ac->nodemask);
+ }
+
/* This is the last chance, in general, before the goto nopage. */
page = get_page_from_freelist(gfp_mask, order,
alloc_flags & ~ALLOC_NO_WATERMARKS, ac);
/* Allocate without watermarks if the context allows */
if (alloc_flags & ALLOC_NO_WATERMARKS) {
- /*
- * Ignore mempolicies if ALLOC_NO_WATERMARKS on the grounds
- * the allocation is high priority and these type of
- * allocations are system rather than user orientated
- */
- ac->zonelist = node_zonelist(numa_node_id(), gfp_mask);
page = get_page_from_freelist(gfp_mask, order,
ALLOC_NO_WATERMARKS, ac);
if (page)
/* Dirty zone balancing only done in the fast path */
ac.spread_dirty_pages = (gfp_mask & __GFP_WRITE);
- /* The preferred zone is used for statistics later */
+ /*
+ * The preferred zone is used for statistics but crucially it is
+ * also used as the starting point for the zonelist iterator. It
+ * may get reset for allocations that ignore memory policies.
+ */
ac.preferred_zoneref = first_zones_zonelist(ac.zonelist,
ac.high_zoneidx, ac.nodemask);
if (!ac.preferred_zoneref) {
for (i = 0; i < (1 << order); i++) {
page_ext = lookup_page_ext(page + i);
+ if (unlikely(!page_ext))
+ continue;
__clear_bit(PAGE_EXT_OWNER, &page_ext->flags);
}
}
void __set_page_owner(struct page *page, unsigned int order, gfp_t gfp_mask)
{
struct page_ext *page_ext = lookup_page_ext(page);
+
struct stack_trace trace = {
.nr_entries = 0,
.max_entries = ARRAY_SIZE(page_ext->trace_entries),
.skip = 3,
};
+ if (unlikely(!page_ext))
+ return;
+
save_stack_trace(&trace);
page_ext->order = order;
void __set_page_owner_migrate_reason(struct page *page, int reason)
{
struct page_ext *page_ext = lookup_page_ext(page);
+ if (unlikely(!page_ext))
+ return;
page_ext->last_migrate_reason = reason;
}
gfp_t __get_page_owner_gfp(struct page *page)
{
struct page_ext *page_ext = lookup_page_ext(page);
+ if (unlikely(!page_ext))
+ /*
+ * The caller just returns 0 if no valid gfp
+ * So return 0 here too.
+ */
+ return 0;
return page_ext->gfp_mask;
}
struct page_ext *new_ext = lookup_page_ext(newpage);
int i;
+ if (unlikely(!old_ext || !new_ext))
+ return;
+
new_ext->order = old_ext->order;
new_ext->gfp_mask = old_ext->gfp_mask;
new_ext->nr_entries = old_ext->nr_entries;
gfp_t gfp_mask = page_ext->gfp_mask;
int mt = gfpflags_to_migratetype(gfp_mask);
+ if (unlikely(!page_ext)) {
+ pr_alert("There is not page extension available.\n");
+ return;
+ }
+
if (!test_bit(PAGE_EXT_OWNER, &page_ext->flags)) {
pr_alert("page_owner info is not active (free page?)\n");
return;
}
page_ext = lookup_page_ext(page);
+ if (unlikely(!page_ext))
+ continue;
/*
* Some pages could be missed by concurrent allocation or free,
continue;
page_ext = lookup_page_ext(page);
+ if (unlikely(!page_ext))
+ continue;
/* Maybe overraping zone */
if (test_bit(PAGE_EXT_OWNER, &page_ext->flags))
struct page_ext *page_ext;
page_ext = lookup_page_ext(page);
+ if (unlikely(!page_ext))
+ return;
+
__set_bit(PAGE_EXT_DEBUG_POISON, &page_ext->flags);
}
struct page_ext *page_ext;
page_ext = lookup_page_ext(page);
+ if (unlikely(!page_ext))
+ return;
+
__clear_bit(PAGE_EXT_DEBUG_POISON, &page_ext->flags);
}
struct page_ext *page_ext;
page_ext = lookup_page_ext(page);
- if (!page_ext)
+ if (unlikely(!page_ext))
return false;
return test_bit(PAGE_EXT_DEBUG_POISON, &page_ext->flags);
static DEFINE_PER_CPU(struct work_struct, lru_add_drain_work);
+/*
+ * lru_add_drain_wq is used to do lru_add_drain_all() from a WQ_MEM_RECLAIM
+ * workqueue, aiding in getting memory freed.
+ */
+static struct workqueue_struct *lru_add_drain_wq;
+
+static int __init lru_init(void)
+{
+ lru_add_drain_wq = alloc_workqueue("lru-add-drain", WQ_MEM_RECLAIM, 0);
+
+ if (WARN(!lru_add_drain_wq,
+ "Failed to create workqueue lru_add_drain_wq"))
+ return -ENOMEM;
+
+ return 0;
+}
+early_initcall(lru_init);
+
void lru_add_drain_all(void)
{
static DEFINE_MUTEX(lock);
pagevec_count(&per_cpu(lru_deactivate_pvecs, cpu)) ||
need_activate_page_drain(cpu)) {
INIT_WORK(work, lru_add_drain_per_cpu);
- schedule_work_on(cpu, work);
+ queue_work_on(cpu, lru_add_drain_wq, work);
cpumask_set_cpu(cpu, &has_work);
}
}
void free_page_and_swap_cache(struct page *page)
{
free_swap_cache(page);
- put_page(page);
+ if (is_huge_zero_page(page))
+ put_huge_zero_page();
+ else
+ put_page(page);
}
/*
*/
void vm_unmap_ram(const void *mem, unsigned int count)
{
- unsigned long size = count << PAGE_SHIFT;
+ unsigned long size = (unsigned long)count << PAGE_SHIFT;
unsigned long addr = (unsigned long)mem;
BUG_ON(!addr);
*/
void *vm_map_ram(struct page **pages, unsigned int count, int node, pgprot_t prot)
{
- unsigned long size = count << PAGE_SHIFT;
+ unsigned long size = (unsigned long)count << PAGE_SHIFT;
unsigned long addr;
void *mem;
unsigned long flags, pgprot_t prot)
{
struct vm_struct *area;
+ unsigned long size; /* In bytes */
might_sleep();
if (count > totalram_pages)
return NULL;
- area = get_vm_area_caller((count << PAGE_SHIFT), flags,
- __builtin_return_address(0));
+ size = (unsigned long)count << PAGE_SHIFT;
+ area = get_vm_area_caller(size, flags, __builtin_return_address(0));
if (!area)
return NULL;
continue;
page_ext = lookup_page_ext(page);
+ if (unlikely(!page_ext))
+ continue;
if (!test_bit(PAGE_EXT_OWNER, &page_ext->flags))
continue;
/* HEADLESS page stored */
bud = HEADLESS;
} else {
- bud = (handle - zhdr->first_num) & BUDDY_MASK;
+ bud = handle_to_buddy(handle);
switch (bud) {
case FIRST:
pool->pages_nr--;
spin_unlock(&pool->lock);
return 0;
- } else if (zhdr->first_chunks != 0 &&
- zhdr->last_chunks != 0 && zhdr->middle_chunks != 0) {
- /* Full, add to buddied list */
- list_add(&zhdr->buddy, &pool->buddied);
- } else if (!test_bit(PAGE_HEADLESS, &page->private)) {
- z3fold_compact_page(zhdr);
- /* add to unbuddied list */
- freechunks = num_free_chunks(zhdr);
- list_add(&zhdr->buddy, &pool->unbuddied[freechunks]);
+ } else if (!test_bit(PAGE_HEADLESS, &page->private)) {
+ if (zhdr->first_chunks != 0 &&
+ zhdr->last_chunks != 0 &&
+ zhdr->middle_chunks != 0) {
+ /* Full, add to buddied list */
+ list_add(&zhdr->buddy, &pool->buddied);
+ } else {
+ z3fold_compact_page(zhdr);
+ /* add to unbuddied list */
+ freechunks = num_free_chunks(zhdr);
+ list_add(&zhdr->buddy,
+ &pool->unbuddied[freechunks]);
+ }
}
/* add to beginning of LRU */
if (ether_addr_equal(vlan->real_dev_addr, dev->dev_addr))
return;
+ /* vlan continues to inherit address of lower device */
+ if (vlan_dev_inherit_address(vlandev, dev))
+ goto out;
+
/* vlan address was different from the old address and is equal to
* the new address */
if (!ether_addr_equal(vlandev->dev_addr, vlan->real_dev_addr) &&
!ether_addr_equal(vlandev->dev_addr, dev->dev_addr))
dev_uc_add(dev, vlandev->dev_addr);
+out:
ether_addr_copy(vlan->real_dev_addr, dev->dev_addr);
}
void vlan_setup(struct net_device *dev);
int register_vlan_dev(struct net_device *dev);
void unregister_vlan_dev(struct net_device *dev, struct list_head *head);
+bool vlan_dev_inherit_address(struct net_device *dev,
+ struct net_device *real_dev);
static inline u32 vlan_get_ingress_priority(struct net_device *dev,
u16 vlan_tci)
strncpy(result, vlan_dev_priv(dev)->real_dev->name, 23);
}
+bool vlan_dev_inherit_address(struct net_device *dev,
+ struct net_device *real_dev)
+{
+ if (dev->addr_assign_type != NET_ADDR_STOLEN)
+ return false;
+
+ ether_addr_copy(dev->dev_addr, real_dev->dev_addr);
+ call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+ return true;
+}
+
static int vlan_dev_open(struct net_device *dev)
{
struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
!(vlan->flags & VLAN_FLAG_LOOSE_BINDING))
return -ENETDOWN;
- if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr)) {
+ if (!ether_addr_equal(dev->dev_addr, real_dev->dev_addr) &&
+ !vlan_dev_inherit_address(dev, real_dev)) {
err = dev_uc_add(real_dev, dev->dev_addr);
if (err < 0)
goto out;
/* ipv6 shared card related stuff */
dev->dev_id = real_dev->dev_id;
- if (is_zero_ether_addr(dev->dev_addr))
- eth_hw_addr_inherit(dev, real_dev);
+ if (is_zero_ether_addr(dev->dev_addr)) {
+ ether_addr_copy(dev->dev_addr, real_dev->dev_addr);
+ dev->addr_assign_type = NET_ADDR_STOLEN;
+ }
if (is_zero_ether_addr(dev->broadcast))
memcpy(dev->broadcast, real_dev->broadcast, dev->addr_len);
break;
case as_addparty:
case as_dropparty:
- sk->sk_err_soft = msg->reply;
+ sk->sk_err_soft = -msg->reply;
/* < 0 failure, otherwise ep_ref */
clear_bit(ATM_VF_WAITING, &vcc->flags);
break;
schedule();
}
finish_wait(sk_sleep(sk), &wait);
- error = xchg(&sk->sk_err_soft, 0);
+ error = -xchg(&sk->sk_err_soft, 0);
out:
release_sock(sk);
return error;
error = -EUNATCH;
goto out;
}
- error = xchg(&sk->sk_err_soft, 0);
+ error = -xchg(&sk->sk_err_soft, 0);
out:
release_sock(sk);
return error;
* change from under us.
*/
list_for_each_entry(v, &vg->vlan_list, vlist) {
+ if (!br_vlan_should_use(v))
+ continue;
f = __br_fdb_get(br, br->dev->dev_addr, v->vid);
if (f && f->is_local && !f->dst)
fdb_delete_local(br, NULL, f);
const struct ceph_osd_request_target *t,
struct ceph_pg_pool_info *pi)
{
- bool pauserd = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSERD);
- bool pausewr = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSEWR) ||
- ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL) ||
+ bool pauserd = ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSERD);
+ bool pausewr = ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSEWR) ||
+ ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL) ||
__pool_full(pi);
WARN_ON(pi->id != t->base_oloc.pool);
bool force_resend = false;
bool need_check_tiering = false;
bool need_resend = false;
- bool sort_bitwise = ceph_osdmap_flag(osdc->osdmap,
- CEPH_OSDMAP_SORTBITWISE);
+ bool sort_bitwise = ceph_osdmap_flag(osdc, CEPH_OSDMAP_SORTBITWISE);
enum calc_target_result ct_res;
int ret;
*/
msg->hdr.data_off = cpu_to_le16(req->r_data_offset);
- dout("%s req %p oid %*pE oid_len %d front %zu data %u\n", __func__,
- req, req->r_t.target_oid.name_len, req->r_t.target_oid.name,
- req->r_t.target_oid.name_len, msg->front.iov_len, data_len);
+ dout("%s req %p oid %s oid_len %d front %zu data %u\n", __func__,
+ req, req->r_t.target_oid.name, req->r_t.target_oid.name_len,
+ msg->front.iov_len, data_len);
}
/*
verify_osdc_locked(osdc);
WARN_ON(!osdc->osdmap->epoch);
- if (ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL) ||
- ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSERD) ||
- ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSEWR)) {
+ if (ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL) ||
+ ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSERD) ||
+ ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSEWR)) {
dout("%s osdc %p continuous\n", __func__, osdc);
continuous = true;
} else {
}
if ((req->r_flags & CEPH_OSD_FLAG_WRITE) &&
- ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSEWR)) {
+ ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSEWR)) {
dout("req %p pausewr\n", req);
req->r_t.paused = true;
maybe_request_map(osdc);
} else if ((req->r_flags & CEPH_OSD_FLAG_READ) &&
- ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSERD)) {
+ ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSERD)) {
dout("req %p pauserd\n", req);
req->r_t.paused = true;
maybe_request_map(osdc);
} else if ((req->r_flags & CEPH_OSD_FLAG_WRITE) &&
!(req->r_flags & (CEPH_OSD_FLAG_FULL_TRY |
CEPH_OSD_FLAG_FULL_FORCE)) &&
- (ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL) ||
+ (ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL) ||
pool_full(osdc, req->r_t.base_oloc.pool))) {
dout("req %p full/pool_full\n", req);
pr_warn_ratelimited("FULL or reached pool quota\n");
struct ceph_osd_request *req = lreq->ping_req;
struct ceph_osd_req_op *op = &req->r_ops[0];
- if (ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSERD)) {
+ if (ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSERD)) {
dout("%s PAUSERD\n", __func__);
return;
}
dout("req %p tid %llu cb\n", req, req->r_tid);
__complete_request(req);
}
+ if (m.flags & CEPH_OSD_FLAG_ONDISK)
+ complete_all(&req->r_safe_completion);
+ ceph_osdc_put_request(req);
} else {
if (req->r_unsafe_callback) {
dout("req %p tid %llu unsafe-cb\n", req, req->r_tid);
WARN_ON(1);
}
}
- if (m.flags & CEPH_OSD_FLAG_ONDISK)
- complete_all(&req->r_safe_completion);
- ceph_osdc_put_request(req);
return;
fail_request:
bool skipped_map = false;
bool was_full;
- was_full = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL);
+ was_full = ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL);
set_pool_was_full(osdc);
if (incremental)
osdc->osdmap = newmap;
}
- was_full &= !ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL);
+ was_full &= !ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL);
scan_requests(&osdc->homeless_osd, skipped_map, was_full, true,
need_resend, need_resend_linger);
if (ceph_check_fsid(osdc->client, &fsid) < 0)
goto bad;
- was_pauserd = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSERD);
- was_pausewr = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSEWR) ||
- ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL) ||
+ was_pauserd = ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSERD);
+ was_pausewr = ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSEWR) ||
+ ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL) ||
have_pool_full(osdc);
/* incremental maps */
* we find out when we are no longer full and stop returning
* ENOSPC.
*/
- pauserd = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSERD);
- pausewr = ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_PAUSEWR) ||
- ceph_osdmap_flag(osdc->osdmap, CEPH_OSDMAP_FULL) ||
+ pauserd = ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSERD);
+ pausewr = ceph_osdmap_flag(osdc, CEPH_OSDMAP_PAUSEWR) ||
+ ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL) ||
have_pool_full(osdc);
if (was_pauserd || was_pausewr || pauserd || pausewr)
maybe_request_map(osdc);
raw_pgid->seed = ceph_str_hash(pi->object_hash, oid->name,
oid->name_len);
- dout("%s %*pE -> raw_pgid %llu.%x\n", __func__, oid->name_len,
- oid->name, raw_pgid->pool, raw_pgid->seed);
+ dout("%s %s -> raw_pgid %llu.%x\n", __func__, oid->name,
+ raw_pgid->pool, raw_pgid->seed);
return 0;
}
EXPORT_SYMBOL(ceph_object_locator_to_pg);
__scm_destroy(scm);
}
-static int do_set_attach_filter(struct socket *sock, int level, int optname,
- char __user *optval, unsigned int optlen)
+/* allocate a 64-bit sock_fprog on the user stack for duration of syscall. */
+struct sock_fprog __user *get_compat_bpf_fprog(char __user *optval)
{
struct compat_sock_fprog __user *fprog32 = (struct compat_sock_fprog __user *)optval;
struct sock_fprog __user *kfprog = compat_alloc_user_space(sizeof(struct sock_fprog));
__get_user(ptr, &fprog32->filter) ||
__put_user(len, &kfprog->len) ||
__put_user(compat_ptr(ptr), &kfprog->filter))
+ return NULL;
+
+ return kfprog;
+}
+EXPORT_SYMBOL_GPL(get_compat_bpf_fprog);
+
+static int do_set_attach_filter(struct socket *sock, int level, int optname,
+ char __user *optval, unsigned int optlen)
+{
+ struct sock_fprog __user *kfprog;
+
+ kfprog = get_compat_bpf_fprog(optval);
+ if (!kfprog)
return -EFAULT;
return sock_setsockopt(sock, level, optname, (char __user *)kfprog,
static int compat_sock_setsockopt(struct socket *sock, int level, int optname,
char __user *optval, unsigned int optlen)
{
- if (optname == SO_ATTACH_FILTER)
+ if (optname == SO_ATTACH_FILTER ||
+ optname == SO_ATTACH_REUSEPORT_CBPF)
return do_set_attach_filter(sock, level, optname,
optval, optlen);
if (optname == SO_RCVTIMEO || optname == SO_SNDTIMEO)
* @xstats_type: TLV type for backward compatibility xstats TLV
* @lock: statistics lock
* @d: dumping handle
+ * @padattr: padding attribute
*
* Initializes the dumping handle, grabs the statistic lock and appends
* an empty TLV header to the socket buffer for use a container for all
* @type: TLV type for top level statistic TLV
* @lock: statistics lock
* @d: dumping handle
+ * @padattr: padding attribute
*
* Initializes the dumping handle, grabs the statistic lock and appends
* an empty TLV header to the socket buffer for use a container for all
spin_lock_irqsave(&bm_pool->lock, flags);
if (bm_pool->buf_num == bm_pool->size) {
pr_warn("pool already filled\n");
+ spin_unlock_irqrestore(&bm_pool->lock, flags);
return bm_pool->buf_num;
}
if (buf_num + bm_pool->buf_num > bm_pool->size) {
pr_warn("cannot allocate %d buffers for pool\n",
buf_num);
+ spin_unlock_irqrestore(&bm_pool->lock, flags);
return 0;
}
if ((buf_num + bm_pool->buf_num) < bm_pool->buf_num) {
pr_warn("Adding %d buffers to the %d current buffers will overflow\n",
buf_num, bm_pool->buf_num);
+ spin_unlock_irqrestore(&bm_pool->lock, flags);
return 0;
}
#include <linux/jiffies.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
+#include <linux/of_net.h>
#include "net-sysfs.h"
hrtimer_set_expires(&t.timer, spin_until);
remaining = ktime_to_ns(hrtimer_expires_remaining(&t.timer));
- if (remaining <= 0) {
- pkt_dev->next_tx = ktime_add_ns(spin_until, pkt_dev->delay);
- return;
- }
+ if (remaining <= 0)
+ goto out;
start_time = ktime_get();
if (remaining < 100000) {
}
pkt_dev->idle_acc += ktime_to_ns(ktime_sub(end_time, start_time));
+out:
pkt_dev->next_tx = ktime_add_ns(spin_until, pkt_dev->delay);
+ destroy_hrtimer_on_stack(&t.timer);
}
static inline void set_pkt_overhead(struct pktgen_dev *pkt_dev)
nl802154_dev_addr_policy))
return -EINVAL;
- if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] &&
- !attrs[NL802154_DEV_ADDR_ATTR_MODE] &&
+ if (!attrs[NL802154_DEV_ADDR_ATTR_PAN_ID] ||
+ !attrs[NL802154_DEV_ADDR_ATTR_MODE] ||
!(attrs[NL802154_DEV_ADDR_ATTR_SHORT] ||
attrs[NL802154_DEV_ADDR_ATTR_EXTENDED]))
return -EINVAL;
*/
net->ipv4.ping_group_range.range[0] = make_kgid(&init_user_ns, 1);
net->ipv4.ping_group_range.range[1] = make_kgid(&init_user_ns, 0);
+
+ /* Default values for sysctl-controlled parameters.
+ * We set them here, in case sysctl is not compiled.
+ */
+ net->ipv4.sysctl_ip_default_ttl = IPDEFTTL;
+ net->ipv4.sysctl_ip_dynaddr = 0;
+ net->ipv4.sysctl_ip_early_demux = 1;
+
return 0;
}
if (!net->ipv4.sysctl_local_reserved_ports)
goto err_ports;
- net->ipv4.sysctl_ip_default_ttl = IPDEFTTL;
- net->ipv4.sysctl_ip_dynaddr = 0;
- net->ipv4.sysctl_ip_early_demux = 1;
-
return 0;
err_ports:
}
}
- if (rcu_access_pointer(sk->sk_filter)) {
- if (udp_lib_checksum_complete(skb))
+ if (rcu_access_pointer(sk->sk_filter) &&
+ udp_lib_checksum_complete(skb))
goto csum_error;
- if (sk_filter(sk, skb))
- goto drop;
- }
+
+ if (sk_filter(sk, skb))
+ goto drop;
udp_csum_pull_header(skb);
if (sk_rcvqueues_full(sk, sk->sk_rcvbuf)) {
Saying M here will produce a module called ip6_gre. If unsure, say N.
+config IPV6_FOU
+ tristate
+ default NET_FOU && IPV6
+
+config IPV6_FOU_TUNNEL
+ tristate
+ default NET_FOU_IP_TUNNELS && IPV6_FOU
+ select IPV6_TUNNEL
+
config IPV6_MULTIPLE_TABLES
bool "IPv6: Multiple Routing Tables"
select FIB_RULES
obj-$(CONFIG_IPV6_SIT) += sit.o
obj-$(CONFIG_IPV6_TUNNEL) += ip6_tunnel.o
obj-$(CONFIG_IPV6_GRE) += ip6_gre.o
-obj-$(CONFIG_NET_FOU) += fou6.o
+obj-$(CONFIG_IPV6_FOU) += fou6.o
obj-y += addrconf_core.o exthdrs_core.o ip6_checksum.o ip6_icmp.o
obj-$(CONFIG_INET) += output_core.o protocol.o $(ipv6-offload)
}
EXPORT_SYMBOL(gue6_build_header);
-#ifdef CONFIG_NET_FOU_IP_TUNNELS
+#if IS_ENABLED(CONFIG_IPV6_FOU_TUNNEL)
static const struct ip6_tnl_encap_ops fou_ip6tun_ops = {
.encap_hlen = fou_encap_hlen,
fl6->daddr = p->raddr;
fl6->flowi6_oif = p->link;
fl6->flowlabel = 0;
+ fl6->flowi6_proto = IPPROTO_GRE;
if (!(p->flags&IP6_TNL_F_USE_ORIG_TCLASS))
fl6->flowlabel |= IPV6_TCLASS_MASK & p->flowinfo;
dev->hard_header_len = LL_MAX_HEADER + t_hlen;
dev->mtu = ETH_DATA_LEN - t_hlen;
+ if (dev->type == ARPHRD_ETHER)
+ dev->mtu -= ETH_HLEN;
if (!(tunnel->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
dev->mtu -= 8;
if (ret)
return ret;
+ dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
+
tunnel = netdev_priv(dev);
ip6gre_tnl_link_config(tunnel, 1);
dev->features |= NETIF_F_NETNS_LOCAL;
dev->priv_flags &= ~IFF_TX_SKB_SHARING;
+ dev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
}
static bool ip6gre_netlink_encap_parms(struct nlattr *data[],
const struct in6_addr *final_dst)
{
struct dst_entry *dst = sk_dst_check(sk, inet6_sk(sk)->dst_cookie);
- int err;
dst = ip6_sk_dst_check(sk, dst, fl6);
+ if (!dst)
+ dst = ip6_dst_lookup_flow(sk, fl6, final_dst);
- err = ip6_dst_lookup_tail(sock_net(sk), sk, &dst, fl6);
- if (err)
- return ERR_PTR(err);
- if (final_dst)
- fl6->daddr = *final_dst;
-
- return xfrm_lookup_route(sock_net(sk), dst, flowi6_to_flowi(fl6), sk, 0);
+ return dst;
}
EXPORT_SYMBOL_GPL(ip6_sk_dst_lookup_flow);
fl6.daddr = *gw;
fl6.flowlabel = (__force __be32)(((iph->flow_lbl[0] & 0xF) << 16) |
(iph->flow_lbl[1] << 8) | iph->flow_lbl[2]);
+ fl6.flowi6_flags = FLOWI_FLAG_KNOWN_NH;
dst = ip6_route_output(net, NULL, &fl6);
if (dst->error) {
dst_release(dst);
destp = ntohs(inet->inet_dport);
srcp = ntohs(inet->inet_sport);
- if (icsk->icsk_pending == ICSK_TIME_RETRANS) {
+ if (icsk->icsk_pending == ICSK_TIME_RETRANS ||
+ icsk->icsk_pending == ICSK_TIME_EARLY_RETRANS ||
+ icsk->icsk_pending == ICSK_TIME_LOSS_PROBE) {
timer_active = 1;
timer_expires = icsk->icsk_timeout;
} else if (icsk->icsk_pending == ICSK_TIME_PROBE0) {
}
}
- if (rcu_access_pointer(sk->sk_filter)) {
- if (udp_lib_checksum_complete(skb))
- goto csum_error;
- if (sk_filter(sk, skb))
- goto drop;
- }
+ if (rcu_access_pointer(sk->sk_filter) &&
+ udp_lib_checksum_complete(skb))
+ goto csum_error;
+
+ if (sk_filter(sk, skb))
+ goto drop;
udp_csum_pull_header(skb);
if (sk_rcvqueues_full(sk, sk->sk_rcvbuf)) {
/* Mark socket as an encapsulation socket. See net/ipv4/udp.c */
tunnel->encap = encap;
if (encap == L2TP_ENCAPTYPE_UDP) {
- struct udp_tunnel_sock_cfg udp_cfg;
+ struct udp_tunnel_sock_cfg udp_cfg = { };
udp_cfg.sk_user_data = tunnel;
udp_cfg.encap_type = UDP_ENCAP_L2TPINUDP;
*/
static int l2tp_ip6_recv(struct sk_buff *skb)
{
+ struct net *net = dev_net(skb->dev);
struct sock *sk;
u32 session_id;
u32 tunnel_id;
}
/* Ok, this is a data packet. Lookup the session. */
- session = l2tp_session_find(&init_net, NULL, session_id);
+ session = l2tp_session_find(net, NULL, session_id);
if (session == NULL)
goto discard;
goto discard;
tunnel_id = ntohl(*(__be32 *) &skb->data[4]);
- tunnel = l2tp_tunnel_find(&init_net, tunnel_id);
+ tunnel = l2tp_tunnel_find(net, tunnel_id);
if (tunnel != NULL)
sk = tunnel->sock;
else {
struct ipv6hdr *iph = ipv6_hdr(skb);
read_lock_bh(&l2tp_ip6_lock);
- sk = __l2tp_ip6_bind_lookup(&init_net, &iph->daddr,
+ sk = __l2tp_ip6_bind_lookup(net, &iph->daddr,
0, tunnel_id);
read_unlock_bh(&l2tp_ip6_lock);
}
struct inet_sock *inet = inet_sk(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
struct sockaddr_l2tpip6 *addr = (struct sockaddr_l2tpip6 *) uaddr;
+ struct net *net = sock_net(sk);
__be32 v4addr = 0;
int addr_type;
int err;
err = -EADDRINUSE;
read_lock_bh(&l2tp_ip6_lock);
- if (__l2tp_ip6_bind_lookup(&init_net, &addr->l2tp_addr,
+ if (__l2tp_ip6_bind_lookup(net, &addr->l2tp_addr,
sk->sk_bound_dev_if, addr->l2tp_conn_id))
goto out_in_use;
read_unlock_bh(&l2tp_ip6_lock);
return 0;
drop:
- IP_INC_STATS(&init_net, IPSTATS_MIB_INDISCARDS);
+ IP_INC_STATS(sock_net(sk), IPSTATS_MIB_INDISCARDS);
kfree_skb(skb);
return -1;
}
break;
case LAPB_FRMR:
- lapb_dbg(1, "(%p) S3 RX FRMR(%d) %02X %02X %02X %02X %02X\n",
+ lapb_dbg(1, "(%p) S3 RX FRMR(%d) %5ph\n",
lapb->dev, frame->pf,
- skb->data[0], skb->data[1], skb->data[2],
- skb->data[3], skb->data[4]);
+ skb->data);
lapb_establish_data_link(lapb);
lapb_dbg(0, "(%p) S3 -> S1\n", lapb->dev);
lapb_requeue_frames(lapb);
}
}
- lapb_dbg(2, "(%p) S%d TX %02X %02X %02X\n",
- lapb->dev, lapb->state,
- skb->data[0], skb->data[1], skb->data[2]);
+ lapb_dbg(2, "(%p) S%d TX %3ph\n", lapb->dev, lapb->state, skb->data);
if (!lapb_data_transmit(lapb, skb))
kfree_skb(skb);
{
frame->type = LAPB_ILLEGAL;
- lapb_dbg(2, "(%p) S%d RX %02X %02X %02X\n",
- lapb->dev, lapb->state,
- skb->data[0], skb->data[1], skb->data[2]);
+ lapb_dbg(2, "(%p) S%d RX %3ph\n", lapb->dev, lapb->state, skb->data);
/* We always need to look at 2 bytes, sometimes we need
* to look at 3 and those cases are handled below.
dptr++;
*dptr++ = lapb->frmr_type;
- lapb_dbg(1, "(%p) S%d TX FRMR %02X %02X %02X %02X %02X\n",
+ lapb_dbg(1, "(%p) S%d TX FRMR %5ph\n",
lapb->dev, lapb->state,
- skb->data[1], skb->data[2], skb->data[3],
- skb->data[4], skb->data[5]);
+ &skb->data[1]);
} else {
dptr = skb_put(skb, 4);
*dptr++ = LAPB_FRMR;
dptr++;
*dptr++ = lapb->frmr_type;
- lapb_dbg(1, "(%p) S%d TX FRMR %02X %02X %02X\n",
- lapb->dev, lapb->state, skb->data[1],
- skb->data[2], skb->data[3]);
+ lapb_dbg(1, "(%p) S%d TX FRMR %3ph\n",
+ lapb->dev, lapb->state, &skb->data[1]);
}
lapb_transmit_buffer(lapb, skb, LAPB_RESPONSE);
del_timer_sync(&sta->mesh->plink_timer);
}
+ /* make sure no readers can access nexthop sta from here on */
+ mesh_path_flush_by_nexthop(sta);
+ synchronize_net();
+
if (changed)
ieee80211_mbss_info_change_notify(sdata, changed);
}
u8 sa_offs, da_offs, pn_offs;
u8 band;
u8 hdr[30 + 2 + IEEE80211_FAST_XMIT_MAX_IV +
- sizeof(rfc1042_header)];
+ sizeof(rfc1042_header)] __aligned(2);
struct rcu_head rcu_head;
};
* If available, return 1, otherwise invalidate this connection
* template and return 0.
*/
-int ip_vs_check_template(struct ip_vs_conn *ct)
+int ip_vs_check_template(struct ip_vs_conn *ct, struct ip_vs_dest *cdest)
{
struct ip_vs_dest *dest = ct->dest;
struct netns_ipvs *ipvs = ct->ipvs;
*/
if ((dest == NULL) ||
!(dest->flags & IP_VS_DEST_F_AVAILABLE) ||
- expire_quiescent_template(ipvs, dest)) {
+ expire_quiescent_template(ipvs, dest) ||
+ (cdest && (dest != cdest))) {
IP_VS_DBG_BUF(9, "check_template: dest not available for "
"protocol %s s:%s:%d v:%s:%d "
"-> d:%s:%d\n",
/* Check if a template already exists */
ct = ip_vs_ct_in_get(¶m);
- if (!ct || !ip_vs_check_template(ct)) {
+ if (!ct || !ip_vs_check_template(ct, NULL)) {
struct ip_vs_scheduler *sched;
/*
vport, ¶m) < 0)
return NULL;
ct = ip_vs_ct_in_get(¶m);
- if (!ct) {
+ /* check if template exists and points to the same dest */
+ if (!ct || !ip_vs_check_template(ct, dest)) {
ct = ip_vs_conn_new(¶m, dest->af, daddr, dport,
IP_VS_CONN_F_TEMPLATE, dest, 0);
if (!ct) {
if (ret) {
pr_err("failed to register helper for pf: %d port: %d\n",
ftp[i][j].tuple.src.l3num, ports[i]);
+ ports_c = i;
nf_conntrack_ftp_fini();
return ret;
}
int nf_conntrack_helper_register(struct nf_conntrack_helper *me)
{
- int ret = 0;
- struct nf_conntrack_helper *cur;
+ struct nf_conntrack_tuple_mask mask = { .src.u.all = htons(0xFFFF) };
unsigned int h = helper_hash(&me->tuple);
+ struct nf_conntrack_helper *cur;
+ int ret = 0;
BUG_ON(me->expect_policy == NULL);
BUG_ON(me->expect_class_max >= NF_CT_MAX_EXPECT_CLASSES);
mutex_lock(&nf_ct_helper_mutex);
hlist_for_each_entry(cur, &nf_ct_helper_hash[h], hnode) {
- if (strncmp(cur->name, me->name, NF_CT_HELPER_NAME_LEN) == 0 &&
- cur->tuple.src.l3num == me->tuple.src.l3num &&
- cur->tuple.dst.protonum == me->tuple.dst.protonum) {
+ if (nf_ct_tuple_src_mask_cmp(&cur->tuple, &me->tuple, &mask)) {
ret = -EEXIST;
goto out;
}
if (ret) {
pr_err("failed to register helper for pf: %u port: %u\n",
irc[i].tuple.src.l3num, ports[i]);
+ ports_c = i;
nf_conntrack_irc_fini();
return ret;
}
if (ret) {
pr_err("failed to register helper for pf: %d port: %d\n",
sane[i][j].tuple.src.l3num, ports[i]);
+ ports_c = i;
nf_conntrack_sane_fini();
return ret;
}
if (ret) {
pr_err("failed to register helper for pf: %u port: %u\n",
sip[i][j].tuple.src.l3num, ports[i]);
+ ports_c = i;
nf_conntrack_sip_fini();
return ret;
}
{ }
};
-#define NET_NF_CONNTRACK_MAX 2089
-
static struct ctl_table nf_ct_netfilter_table[] = {
{
.procname = "nf_conntrack_max",
if (ret) {
pr_err("failed to register helper for pf: %u port: %u\n",
tftp[i][j].tuple.src.l3num, ports[i]);
+ ports_c = i;
nf_conntrack_tftp_fini();
return ret;
}
* Once the queue is registered it must reinject all packets it
* receives, no matter what.
*/
-static const struct nf_queue_handler __rcu *queue_handler __read_mostly;
/* return EBUSY when somebody else is registered, return EEXIST if the
* same handler is registered, return 0 in case of success. */
-void nf_register_queue_handler(const struct nf_queue_handler *qh)
+void nf_register_queue_handler(struct net *net, const struct nf_queue_handler *qh)
{
/* should never happen, we only have one queueing backend in kernel */
- WARN_ON(rcu_access_pointer(queue_handler));
- rcu_assign_pointer(queue_handler, qh);
+ WARN_ON(rcu_access_pointer(net->nf.queue_handler));
+ rcu_assign_pointer(net->nf.queue_handler, qh);
}
EXPORT_SYMBOL(nf_register_queue_handler);
/* The caller must flush their queue before this */
-void nf_unregister_queue_handler(void)
+void nf_unregister_queue_handler(struct net *net)
{
- RCU_INIT_POINTER(queue_handler, NULL);
- synchronize_rcu();
+ RCU_INIT_POINTER(net->nf.queue_handler, NULL);
}
EXPORT_SYMBOL(nf_unregister_queue_handler);
const struct nf_queue_handler *qh;
rcu_read_lock();
- qh = rcu_dereference(queue_handler);
+ qh = rcu_dereference(net->nf.queue_handler);
if (qh)
qh->nf_hook_drop(net, ops);
rcu_read_unlock();
struct nf_queue_entry *entry = NULL;
const struct nf_afinfo *afinfo;
const struct nf_queue_handler *qh;
+ struct net *net = state->net;
/* QUEUE == DROP if no one is waiting, to be safe. */
- qh = rcu_dereference(queue_handler);
+ qh = rcu_dereference(net->nf.queue_handler);
if (!qh) {
status = -ESRCH;
goto err;
/* Only accept unspec with dump */
if (nfmsg->nfgen_family == NFPROTO_UNSPEC)
return -EAFNOSUPPORT;
+ if (!nla[NFTA_SET_TABLE])
+ return -EINVAL;
set = nf_tables_set_lookup(ctx.table, nla[NFTA_SET_NAME]);
if (IS_ERR(set))
if (entskb->tstamp.tv64) {
struct nfqnl_msg_packet_timestamp ts;
- struct timespec64 kts = ktime_to_timespec64(skb->tstamp);
+ struct timespec64 kts = ktime_to_timespec64(entskb->tstamp);
ts.sec = cpu_to_be64(kts.tv_sec);
ts.usec = cpu_to_be64(kts.tv_nsec / NSEC_PER_USEC);
net->nf.proc_netfilter, &nfqnl_file_ops))
return -ENOMEM;
#endif
+ nf_register_queue_handler(net, &nfqh);
return 0;
}
static void __net_exit nfnl_queue_net_exit(struct net *net)
{
+ nf_unregister_queue_handler(net);
#ifdef CONFIG_PROC_FS
remove_proc_entry("nfnetlink_queue", net->nf.proc_netfilter);
#endif
}
+static void nfnl_queue_net_exit_batch(struct list_head *net_exit_list)
+{
+ synchronize_rcu();
+}
+
static struct pernet_operations nfnl_queue_net_ops = {
- .init = nfnl_queue_net_init,
- .exit = nfnl_queue_net_exit,
- .id = &nfnl_queue_net_id,
- .size = sizeof(struct nfnl_queue_net),
+ .init = nfnl_queue_net_init,
+ .exit = nfnl_queue_net_exit,
+ .exit_batch = nfnl_queue_net_exit_batch,
+ .id = &nfnl_queue_net_id,
+ .size = sizeof(struct nfnl_queue_net),
};
static int __init nfnetlink_queue_init(void)
}
register_netdevice_notifier(&nfqnl_dev_notifier);
- nf_register_queue_handler(&nfqh);
return status;
cleanup_netlink_notifier:
static void __exit nfnetlink_queue_fini(void)
{
- nf_unregister_queue_handler();
unregister_netdevice_notifier(&nfqnl_dev_notifier);
nfnetlink_subsys_unregister(&nfqnl_subsys);
netlink_unregister_notifier(&nfqnl_rtnl_notifier);
return -EINVAL;
if (strcmp(t->u.user.name, XT_STANDARD_TARGET) == 0 &&
- target_offset + sizeof(struct compat_xt_standard_target) != next_offset)
+ COMPAT_XT_ALIGN(target_offset + sizeof(struct compat_xt_standard_target)) != next_offset)
return -EINVAL;
/* compat_xt_entry match has less strict aligment requirements,
return -EINVAL;
if (strcmp(t->u.user.name, XT_STANDARD_TARGET) == 0 &&
- target_offset + sizeof(struct xt_standard_target) != next_offset)
+ XT_ALIGN(target_offset + sizeof(struct xt_standard_target)) != next_offset)
return -EINVAL;
return xt_check_entry_match(elems, base + target_offset,
return !!key->eth.type;
}
+static void update_ethertype(struct sk_buff *skb, struct ethhdr *hdr,
+ __be16 ethertype)
+{
+ if (skb->ip_summed == CHECKSUM_COMPLETE) {
+ __be16 diff[] = { ~(hdr->h_proto), ethertype };
+
+ skb->csum = ~csum_partial((char *)diff, sizeof(diff),
+ ~skb->csum);
+ }
+
+ hdr->h_proto = ethertype;
+}
+
static int push_mpls(struct sk_buff *skb, struct sw_flow_key *key,
const struct ovs_action_push_mpls *mpls)
{
__be32 *new_mpls_lse;
- struct ethhdr *hdr;
/* Networking stack do not allow simultaneous Tunnel and MPLS GSO. */
if (skb->encapsulation)
skb_postpush_rcsum(skb, new_mpls_lse, MPLS_HLEN);
- hdr = eth_hdr(skb);
- hdr->h_proto = mpls->mpls_ethertype;
-
+ update_ethertype(skb, eth_hdr(skb), mpls->mpls_ethertype);
if (!skb->inner_protocol)
skb_set_inner_protocol(skb, skb->protocol);
skb->protocol = mpls->mpls_ethertype;
* field correctly in the presence of VLAN tags.
*/
hdr = (struct ethhdr *)(skb_mpls_header(skb) - ETH_HLEN);
- hdr->h_proto = ethertype;
+ update_ethertype(skb, hdr, ethertype);
if (eth_p_mpls(skb->protocol))
skb->protocol = ethertype;
#include <net/inet_common.h>
#endif
#include <linux/bpf.h>
+#include <net/compat.h>
#include "internal.h"
}
+#ifdef CONFIG_COMPAT
+static int compat_packet_setsockopt(struct socket *sock, int level, int optname,
+ char __user *optval, unsigned int optlen)
+{
+ struct packet_sock *po = pkt_sk(sock->sk);
+
+ if (level != SOL_PACKET)
+ return -ENOPROTOOPT;
+
+ if (optname == PACKET_FANOUT_DATA &&
+ po->fanout && po->fanout->type == PACKET_FANOUT_CBPF) {
+ optval = (char __user *)get_compat_bpf_fprog(optval);
+ if (!optval)
+ return -EFAULT;
+ optlen = sizeof(struct sock_fprog);
+ }
+
+ return packet_setsockopt(sock, level, optname, optval, optlen);
+}
+#endif
+
static int packet_notifier(struct notifier_block *this,
unsigned long msg, void *ptr)
{
.shutdown = sock_no_shutdown,
.setsockopt = packet_setsockopt,
.getsockopt = packet_getsockopt,
+#ifdef CONFIG_COMPAT
+ .compat_setsockopt = compat_packet_setsockopt,
+#endif
.sendmsg = packet_sendmsg,
.recvmsg = packet_recvmsg,
.mmap = packet_mmap,
RDS_CONN_CONNECTING,
RDS_CONN_DISCONNECTING,
RDS_CONN_UP,
+ RDS_CONN_RESETTING,
RDS_CONN_ERROR,
};
void rds_shutdown_worker(struct work_struct *);
void rds_send_worker(struct work_struct *);
void rds_recv_worker(struct work_struct *);
+void rds_connect_path_complete(struct rds_connection *conn, int curr);
void rds_connect_complete(struct rds_connection *conn);
/* transport.c */
minfo.fport = inc->i_hdr.h_dport;
}
+ minfo.flags = 0;
+
rds_info_copy(iter, &minfo, sizeof(minfo));
}
list_splice_init(&conn->c_retrans, &conn->c_send_queue);
spin_unlock_irqrestore(&conn->c_lock, flags);
}
+EXPORT_SYMBOL_GPL(rds_send_reset);
static int acquire_in_xmit(struct rds_connection *conn)
{
}
/*
- * This is the only path that sets tc->t_sock. Send and receive trust that
- * it is set. The RDS_CONN_UP bit protects those paths from being
- * called while it isn't set.
+ * rds_tcp_reset_callbacks() switches the to the new sock and
+ * returns the existing tc->t_sock.
+ *
+ * The only functions that set tc->t_sock are rds_tcp_set_callbacks
+ * and rds_tcp_reset_callbacks. Send and receive trust that
+ * it is set. The absence of RDS_CONN_UP bit protects those paths
+ * from being called while it isn't set.
+ */
+void rds_tcp_reset_callbacks(struct socket *sock,
+ struct rds_connection *conn)
+{
+ struct rds_tcp_connection *tc = conn->c_transport_data;
+ struct socket *osock = tc->t_sock;
+
+ if (!osock)
+ goto newsock;
+
+ /* Need to resolve a duelling SYN between peers.
+ * We have an outstanding SYN to this peer, which may
+ * potentially have transitioned to the RDS_CONN_UP state,
+ * so we must quiesce any send threads before resetting
+ * c_transport_data. We quiesce these threads by setting
+ * c_state to something other than RDS_CONN_UP, and then
+ * waiting for any existing threads in rds_send_xmit to
+ * complete release_in_xmit(). (Subsequent threads entering
+ * rds_send_xmit() will bail on !rds_conn_up().
+ *
+ * However an incoming syn-ack at this point would end up
+ * marking the conn as RDS_CONN_UP, and would again permit
+ * rds_send_xmi() threads through, so ideally we would
+ * synchronize on RDS_CONN_UP after lock_sock(), but cannot
+ * do that: waiting on !RDS_IN_XMIT after lock_sock() may
+ * end up deadlocking with tcp_sendmsg(), and the RDS_IN_XMIT
+ * would not get set. As a result, we set c_state to
+ * RDS_CONN_RESETTTING, to ensure that rds_tcp_state_change
+ * cannot mark rds_conn_path_up() in the window before lock_sock()
+ */
+ atomic_set(&conn->c_state, RDS_CONN_RESETTING);
+ wait_event(conn->c_waitq, !test_bit(RDS_IN_XMIT, &conn->c_flags));
+ lock_sock(osock->sk);
+ /* reset receive side state for rds_tcp_data_recv() for osock */
+ if (tc->t_tinc) {
+ rds_inc_put(&tc->t_tinc->ti_inc);
+ tc->t_tinc = NULL;
+ }
+ tc->t_tinc_hdr_rem = sizeof(struct rds_header);
+ tc->t_tinc_data_rem = 0;
+ tc->t_sock = NULL;
+
+ write_lock_bh(&osock->sk->sk_callback_lock);
+
+ osock->sk->sk_user_data = NULL;
+ osock->sk->sk_data_ready = tc->t_orig_data_ready;
+ osock->sk->sk_write_space = tc->t_orig_write_space;
+ osock->sk->sk_state_change = tc->t_orig_state_change;
+ write_unlock_bh(&osock->sk->sk_callback_lock);
+ release_sock(osock->sk);
+ sock_release(osock);
+newsock:
+ rds_send_reset(conn);
+ lock_sock(sock->sk);
+ write_lock_bh(&sock->sk->sk_callback_lock);
+ tc->t_sock = sock;
+ sock->sk->sk_user_data = conn;
+ sock->sk->sk_data_ready = rds_tcp_data_ready;
+ sock->sk->sk_write_space = rds_tcp_write_space;
+ sock->sk->sk_state_change = rds_tcp_state_change;
+
+ write_unlock_bh(&sock->sk->sk_callback_lock);
+ release_sock(sock->sk);
+}
+
+/* Add tc to rds_tcp_tc_list and set tc->t_sock. See comments
+ * above rds_tcp_reset_callbacks for notes about synchronization
+ * with data path
*/
void rds_tcp_set_callbacks(struct socket *sock, struct rds_connection *conn)
{
void rds_tcp_tune(struct socket *sock);
void rds_tcp_nonagle(struct socket *sock);
void rds_tcp_set_callbacks(struct socket *sock, struct rds_connection *conn);
+void rds_tcp_reset_callbacks(struct socket *sock, struct rds_connection *conn);
void rds_tcp_restore_callbacks(struct socket *sock,
struct rds_tcp_connection *tc);
u32 rds_tcp_snd_nxt(struct rds_tcp_connection *tc);
case TCP_SYN_RECV:
break;
case TCP_ESTABLISHED:
- rds_connect_complete(conn);
+ rds_connect_path_complete(conn, RDS_CONN_CONNECTING);
break;
case TCP_CLOSE_WAIT:
case TCP_CLOSE:
struct inet_sock *inet;
struct rds_tcp_connection *rs_tcp = NULL;
int conn_state;
- struct sock *nsk;
if (!sock) /* module unload or netns delete in progress */
return -ENETUNREACH;
!conn->c_outgoing) {
goto rst_nsk;
} else {
- atomic_set(&conn->c_state, RDS_CONN_CONNECTING);
- wait_event(conn->c_waitq,
- !test_bit(RDS_IN_XMIT, &conn->c_flags));
- rds_tcp_restore_callbacks(rs_tcp->t_sock, rs_tcp);
+ rds_tcp_reset_callbacks(new_sock, conn);
conn->c_outgoing = 0;
+ /* rds_connect_path_complete() marks RDS_CONN_UP */
+ rds_connect_path_complete(conn, RDS_CONN_DISCONNECTING);
}
+ } else {
+ rds_tcp_set_callbacks(new_sock, conn);
+ rds_connect_path_complete(conn, RDS_CONN_CONNECTING);
}
- rds_tcp_set_callbacks(new_sock, conn);
- rds_connect_complete(conn); /* marks RDS_CONN_UP */
new_sock = NULL;
ret = 0;
goto out;
rst_nsk:
/* reset the newly returned accept sock and bail */
- nsk = new_sock->sk;
- rds_tcp_stats_inc(s_tcp_listen_closed_stale);
- nsk->sk_user_data = NULL;
- nsk->sk_prot->disconnect(nsk, 0);
- tcp_done(nsk);
- new_sock = NULL;
+ kernel_sock_shutdown(new_sock, SHUT_RDWR);
ret = 0;
out:
if (rs_tcp)
struct workqueue_struct *rds_wq;
EXPORT_SYMBOL_GPL(rds_wq);
-void rds_connect_complete(struct rds_connection *conn)
+void rds_connect_path_complete(struct rds_connection *conn, int curr)
{
- if (!rds_conn_transition(conn, RDS_CONN_CONNECTING, RDS_CONN_UP)) {
+ if (!rds_conn_transition(conn, curr, RDS_CONN_UP)) {
printk(KERN_WARNING "%s: Cannot transition to state UP, "
"current state is %d\n",
__func__,
queue_delayed_work(rds_wq, &conn->c_send_w, 0);
queue_delayed_work(rds_wq, &conn->c_recv_w, 0);
}
+EXPORT_SYMBOL_GPL(rds_connect_path_complete);
+
+void rds_connect_complete(struct rds_connection *conn)
+{
+ rds_connect_path_complete(conn, RDS_CONN_CONNECTING);
+}
EXPORT_SYMBOL_GPL(rds_connect_complete);
/*
/* pin the cipher we need so that the crypto layer doesn't invoke
* keventd to go get it */
rxkad_ci = crypto_alloc_skcipher("pcbc(fcrypt)", 0, CRYPTO_ALG_ASYNC);
- if (IS_ERR(rxkad_ci))
- return PTR_ERR(rxkad_ci);
- return 0;
+ return PTR_ERR_OR_ZERO(rxkad_ci);
}
/*
bool peak_present;
};
#define to_police(pc) \
- container_of(pc, struct tcf_police, common)
+ container_of(pc->priv, struct tcf_police, common)
#define POL_TAB_MASK 15
struct nlattr *est, struct tc_action *a,
int ovr, int bind)
{
- unsigned int h;
int ret = 0, err;
struct nlattr *tb[TCA_POLICE_MAX + 1];
struct tc_police *parm;
struct tcf_police *police;
struct qdisc_rate_table *R_tab = NULL, *P_tab = NULL;
struct tc_action_net *tn = net_generic(net, police_net_id);
- struct tcf_hashinfo *hinfo = tn->hinfo;
int size;
if (nla == NULL)
if (parm->index) {
if (tcf_hash_search(tn, a, parm->index)) {
- police = to_police(a->priv);
+ police = to_police(a);
if (bind) {
police->tcf_bindcnt += 1;
police->tcf_refcnt += 1;
/* not replacing */
return -EEXIST;
}
+ } else {
+ ret = tcf_hash_create(tn, parm->index, NULL, a,
+ sizeof(*police), bind, false);
+ if (ret)
+ return ret;
+ ret = ACT_P_CREATED;
}
- police = kzalloc(sizeof(*police), GFP_KERNEL);
- if (police == NULL)
- return -ENOMEM;
- ret = ACT_P_CREATED;
- police->tcf_refcnt = 1;
- spin_lock_init(&police->tcf_lock);
- if (bind)
- police->tcf_bindcnt = 1;
+ police = to_police(a);
override:
if (parm->rate.rate) {
err = -ENOMEM;
return ret;
police->tcfp_t_c = ktime_get_ns();
- police->tcf_index = parm->index ? parm->index :
- tcf_hash_new_index(tn);
- h = tcf_hash(police->tcf_index, POL_TAB_MASK);
- spin_lock_bh(&hinfo->lock);
- hlist_add_head(&police->tcf_head, &hinfo->htab[h]);
- spin_unlock_bh(&hinfo->lock);
+ tcf_hash_insert(tn, a);
- a->priv = police;
return ret;
failure_unlock:
qdisc_put_rtab(P_tab);
qdisc_put_rtab(R_tab);
if (ret == ACT_P_CREATED)
- kfree(police);
+ tcf_hash_cleanup(a, est);
return err;
}
spin_lock(&police->tcf_lock);
bstats_update(&police->tcf_bstats, skb);
+ tcf_lastuse_update(&police->tcf_tm);
if (police->tcfp_ewma_rate &&
police->tcf_rate_est.bps >= police->tcfp_ewma_rate) {
.refcnt = police->tcf_refcnt - ref,
.bindcnt = police->tcf_bindcnt - bind,
};
+ struct tcf_t t;
if (police->rate_present)
psched_ratecfg_getrate(&opt.rate, &police->rate);
if (police->tcfp_ewma_rate &&
nla_put_u32(skb, TCA_POLICE_AVRATE, police->tcfp_ewma_rate))
goto nla_put_failure;
+
+ t.install = jiffies_to_clock_t(jiffies - police->tcf_tm.install);
+ t.lastuse = jiffies_to_clock_t(jiffies - police->tcf_tm.lastuse);
+ t.expires = jiffies_to_clock_t(police->tcf_tm.expires);
+ if (nla_put_64bit(skb, TCA_POLICE_TM, sizeof(t), &t, TCA_POLICE_PAD))
+ goto nla_put_failure;
+
return skb->len;
nla_put_failure:
struct tc_cls_flower_offload offload = {0};
struct tc_to_netdev tc;
- if (!tc_should_offload(dev, 0))
+ if (!tc_should_offload(dev, tp, 0))
return;
offload.command = TC_CLSFLOWER_DESTROY;
struct tc_cls_flower_offload offload = {0};
struct tc_to_netdev tc;
- if (!tc_should_offload(dev, flags))
+ if (!tc_should_offload(dev, tp, flags))
return;
offload.command = TC_CLSFLOWER_REPLACE;
struct tc_cls_flower_offload offload = {0};
struct tc_to_netdev tc;
- if (!tc_should_offload(dev, 0))
+ if (!tc_should_offload(dev, tp, 0))
return;
offload.command = TC_CLSFLOWER_STATS;
offload.type = TC_SETUP_CLSU32;
offload.cls_u32 = &u32_offload;
- if (tc_should_offload(dev, 0)) {
+ if (tc_should_offload(dev, tp, 0)) {
offload.cls_u32->command = TC_CLSU32_DELETE_KNODE;
offload.cls_u32->knode.handle = handle;
dev->netdev_ops->ndo_setup_tc(dev, tp->q->handle,
struct tc_to_netdev offload;
int err;
+ if (!tc_should_offload(dev, tp, flags))
+ return tc_skip_sw(flags) ? -EINVAL : 0;
+
offload.type = TC_SETUP_CLSU32;
offload.cls_u32 = &u32_offload;
- if (tc_should_offload(dev, flags)) {
- offload.cls_u32->command = TC_CLSU32_NEW_HNODE;
- offload.cls_u32->hnode.divisor = h->divisor;
- offload.cls_u32->hnode.handle = h->handle;
- offload.cls_u32->hnode.prio = h->prio;
+ offload.cls_u32->command = TC_CLSU32_NEW_HNODE;
+ offload.cls_u32->hnode.divisor = h->divisor;
+ offload.cls_u32->hnode.handle = h->handle;
+ offload.cls_u32->hnode.prio = h->prio;
- err = dev->netdev_ops->ndo_setup_tc(dev, tp->q->handle,
- tp->protocol, &offload);
- if (tc_skip_sw(flags))
- return err;
- }
+ err = dev->netdev_ops->ndo_setup_tc(dev, tp->q->handle,
+ tp->protocol, &offload);
+ if (tc_skip_sw(flags))
+ return err;
return 0;
}
offload.type = TC_SETUP_CLSU32;
offload.cls_u32 = &u32_offload;
- if (tc_should_offload(dev, 0)) {
+ if (tc_should_offload(dev, tp, 0)) {
offload.cls_u32->command = TC_CLSU32_DELETE_HNODE;
offload.cls_u32->hnode.divisor = h->divisor;
offload.cls_u32->hnode.handle = h->handle;
offload.type = TC_SETUP_CLSU32;
offload.cls_u32 = &u32_offload;
- if (tc_should_offload(dev, flags)) {
- offload.cls_u32->command = TC_CLSU32_REPLACE_KNODE;
- offload.cls_u32->knode.handle = n->handle;
- offload.cls_u32->knode.fshift = n->fshift;
+ if (!tc_should_offload(dev, tp, flags))
+ return tc_skip_sw(flags) ? -EINVAL : 0;
+
+ offload.cls_u32->command = TC_CLSU32_REPLACE_KNODE;
+ offload.cls_u32->knode.handle = n->handle;
+ offload.cls_u32->knode.fshift = n->fshift;
#ifdef CONFIG_CLS_U32_MARK
- offload.cls_u32->knode.val = n->val;
- offload.cls_u32->knode.mask = n->mask;
+ offload.cls_u32->knode.val = n->val;
+ offload.cls_u32->knode.mask = n->mask;
#else
- offload.cls_u32->knode.val = 0;
- offload.cls_u32->knode.mask = 0;
+ offload.cls_u32->knode.val = 0;
+ offload.cls_u32->knode.mask = 0;
#endif
- offload.cls_u32->knode.sel = &n->sel;
- offload.cls_u32->knode.exts = &n->exts;
- if (n->ht_down)
- offload.cls_u32->knode.link_handle = n->ht_down->handle;
-
- err = dev->netdev_ops->ndo_setup_tc(dev, tp->q->handle,
- tp->protocol, &offload);
- if (tc_skip_sw(flags))
- return err;
- }
+ offload.cls_u32->knode.sel = &n->sel;
+ offload.cls_u32->knode.exts = &n->exts;
+ if (n->ht_down)
+ offload.cls_u32->knode.link_handle = n->ht_down->handle;
+
+ err = dev->netdev_ops->ndo_setup_tc(dev, tp->q->handle,
+ tp->protocol, &offload);
+ if (tc_skip_sw(flags))
+ return err;
return 0;
}
if (tb[TCA_U32_FLAGS]) {
flags = nla_get_u32(tb[TCA_U32_FLAGS]);
if (!tc_flags_valid(flags))
- return err;
+ return -EINVAL;
}
n = (struct tc_u_knode *)*arg;
ht->divisor = divisor;
ht->handle = handle;
ht->prio = tp->prio;
+
+ err = u32_replace_hw_hnode(tp, ht, flags);
+ if (err) {
+ kfree(ht);
+ return err;
+ }
+
RCU_INIT_POINTER(ht->next, tp_c->hlist);
rcu_assign_pointer(tp_c->hlist, ht);
*arg = (unsigned long)ht;
- u32_replace_hw_hnode(tp, ht, flags);
return 0;
}
if (throttle)
qdisc_throttled(wd->qdisc);
+ if (wd->last_expires == expires)
+ return;
+
+ wd->last_expires = expires;
hrtimer_start(&wd->timer,
ns_to_ktime(expires),
HRTIMER_MODE_ABS_PINNED);
cl->deficit = cl->quantum;
}
+ qdisc_qstats_backlog_inc(sch, skb);
sch->q.qlen++;
return err;
}
bstats_update(&cl->bstats, skb);
qdisc_bstats_update(sch, skb);
+ qdisc_qstats_backlog_dec(sch, skb);
sch->q.qlen--;
return skb;
}
if (cl->qdisc->ops->drop) {
len = cl->qdisc->ops->drop(cl->qdisc);
if (len > 0) {
+ sch->qstats.backlog -= len;
sch->q.qlen--;
if (cl->qdisc->q.qlen == 0)
list_del(&cl->alist);
qdisc_reset(cl->qdisc);
}
}
+ sch->qstats.backlog = 0;
sch->q.qlen = 0;
}
unsigned int idx, prev_backlog, prev_qlen;
struct fq_codel_flow *flow;
int uninitialized_var(ret);
+ unsigned int pkt_len;
bool memory_limited;
idx = fq_codel_classify(skb, sch, &ret);
prev_backlog = sch->qstats.backlog;
prev_qlen = sch->q.qlen;
+ /* save this packet length as it might be dropped by fq_codel_drop() */
+ pkt_len = qdisc_pkt_len(skb);
/* fq_codel_drop() is quite expensive, as it performs a linear search
* in q->backlogs[] to find a fat flow.
* So instead of dropping a single packet, drop half of its backlog
*/
ret = fq_codel_drop(sch, q->drop_batch_size);
- q->drop_overlimit += prev_qlen - sch->q.qlen;
+ prev_qlen -= sch->q.qlen;
+ prev_backlog -= sch->qstats.backlog;
+ q->drop_overlimit += prev_qlen;
if (memory_limited)
- q->drop_overmemory += prev_qlen - sch->q.qlen;
- /* As we dropped packet(s), better let upper stack know this */
- qdisc_tree_reduce_backlog(sch, prev_qlen - sch->q.qlen,
- prev_backlog - sch->qstats.backlog);
+ q->drop_overmemory += prev_qlen;
- return ret == idx ? NET_XMIT_CN : NET_XMIT_SUCCESS;
+ /* As we dropped packet(s), better let upper stack know this.
+ * If we dropped a packet for this flow, return NET_XMIT_CN,
+ * but in this case, our parents wont increase their backlogs.
+ */
+ if (ret == idx) {
+ qdisc_tree_reduce_backlog(sch, prev_qlen - 1,
+ prev_backlog - pkt_len);
+ return NET_XMIT_CN;
+ }
+ qdisc_tree_reduce_backlog(sch, prev_qlen, prev_backlog);
+ return NET_XMIT_SUCCESS;
}
/* This is the specific function called from codel_dequeue()
qs.backlog = q->backlogs[idx];
qs.drops = flow->dropped;
}
- if (gnet_stats_copy_queue(d, NULL, &qs, 0) < 0)
+ if (gnet_stats_copy_queue(d, NULL, &qs, qs.qlen) < 0)
return -1;
if (idx < q->flows_cnt)
return gnet_stats_copy_app(d, &xstats, sizeof(xstats));
{
q->gso_skb = skb;
q->qstats.requeues++;
+ qdisc_qstats_backlog_inc(q, skb);
q->q.qlen++; /* it's still part of the queue */
__netif_schedule(q);
txq = skb_get_tx_queue(txq->dev, skb);
if (!netif_xmit_frozen_or_stopped(txq)) {
q->gso_skb = NULL;
+ qdisc_qstats_backlog_dec(q, skb);
q->q.qlen--;
} else
skb = NULL;
q->eligible = RB_ROOT;
INIT_LIST_HEAD(&q->droplist);
qdisc_watchdog_cancel(&q->watchdog);
+ sch->qstats.backlog = 0;
sch->q.qlen = 0;
}
struct hfsc_sched *q = qdisc_priv(sch);
unsigned char *b = skb_tail_pointer(skb);
struct tc_hfsc_qopt qopt;
- struct hfsc_class *cl;
- unsigned int i;
-
- sch->qstats.backlog = 0;
- for (i = 0; i < q->clhash.hashsize; i++) {
- hlist_for_each_entry(cl, &q->clhash.hash[i], cl_common.hnode)
- sch->qstats.backlog += cl->qdisc->qstats.backlog;
- }
qopt.defcls = q->defcls;
if (nla_put(skb, TCA_OPTIONS, sizeof(qopt), &qopt))
if (cl->qdisc->q.qlen == 1)
set_active(cl, qdisc_pkt_len(skb));
+ qdisc_qstats_backlog_inc(sch, skb);
sch->q.qlen++;
return NET_XMIT_SUCCESS;
qdisc_unthrottled(sch);
qdisc_bstats_update(sch, skb);
+ qdisc_qstats_backlog_dec(sch, skb);
sch->q.qlen--;
return skb;
}
cl->qstats.drops++;
qdisc_qstats_drop(sch);
+ sch->qstats.backlog -= len;
sch->q.qlen--;
return len;
}
}
}
qdisc_qstats_overlimit(sch);
- if (likely(next_event > q->now)) {
- if (!test_bit(__QDISC_STATE_DEACTIVATED,
- &qdisc_root_sleeping(q->watchdog.qdisc)->state)) {
- ktime_t time = ns_to_ktime(next_event);
- qdisc_throttled(q->watchdog.qdisc);
- hrtimer_start(&q->watchdog.timer, time,
- HRTIMER_MODE_ABS_PINNED);
- }
- } else {
+ if (likely(next_event > q->now))
+ qdisc_watchdog_schedule_ns(&q->watchdog, next_event, true);
+ else
schedule_work(&q->work);
- }
fin:
return skb;
}
return TC_H_MIN(classid) + 1;
}
+static bool ingress_cl_offload(u32 classid)
+{
+ return true;
+}
+
static unsigned long ingress_bind_filter(struct Qdisc *sch,
unsigned long parent, u32 classid)
{
.put = ingress_put,
.walk = ingress_walk,
.tcf_chain = ingress_find_tcf,
+ .tcf_cl_offload = ingress_cl_offload,
.bind_tcf = ingress_bind_filter,
.unbind_tcf = ingress_put,
};
}
}
+static bool clsact_cl_offload(u32 classid)
+{
+ return TC_H_MIN(classid) == TC_H_MIN(TC_H_MIN_INGRESS);
+}
+
static unsigned long clsact_bind_filter(struct Qdisc *sch,
unsigned long parent, u32 classid)
{
.put = ingress_put,
.walk = ingress_walk,
.tcf_chain = clsact_find_tcf,
+ .tcf_cl_offload = clsact_cl_offload,
.bind_tcf = clsact_bind_filter,
.unbind_tcf = ingress_put,
};
ret = qdisc_enqueue(skb, qdisc);
if (ret == NET_XMIT_SUCCESS) {
+ qdisc_qstats_backlog_inc(sch, skb);
sch->q.qlen++;
return NET_XMIT_SUCCESS;
}
struct sk_buff *skb = qdisc_dequeue_peeked(qdisc);
if (skb) {
qdisc_bstats_update(sch, skb);
+ qdisc_qstats_backlog_dec(sch, skb);
sch->q.qlen--;
return skb;
}
for (prio = q->bands-1; prio >= 0; prio--) {
qdisc = q->queues[prio];
if (qdisc->ops->drop && (len = qdisc->ops->drop(qdisc)) != 0) {
+ sch->qstats.backlog -= len;
sch->q.qlen--;
return len;
}
for (prio = 0; prio < q->bands; prio++)
qdisc_reset(q->queues[prio]);
+ sch->qstats.backlog = 0;
sch->q.qlen = 0;
}
cl->agg->lmax, qdisc_pkt_len(skb), cl->common.classid);
err = qfq_change_agg(sch, cl, cl->agg->class_weight,
qdisc_pkt_len(skb));
- if (err)
- return err;
+ if (err) {
+ cl->qstats.drops++;
+ return qdisc_drop(skb, sch);
+ }
}
err = qdisc_enqueue(skb, cl->qdisc);
ret = qdisc_enqueue(skb, child);
if (likely(ret == NET_XMIT_SUCCESS)) {
+ qdisc_qstats_backlog_inc(sch, skb);
sch->q.qlen++;
} else if (net_xmit_drop_count(ret)) {
q->stats.pdrop++;
skb = child->dequeue(child);
if (skb) {
qdisc_bstats_update(sch, skb);
+ qdisc_qstats_backlog_dec(sch, skb);
sch->q.qlen--;
} else {
if (!red_is_idling(&q->vars))
if (child->ops->drop && (len = child->ops->drop(child)) > 0) {
q->stats.other++;
qdisc_qstats_drop(sch);
+ sch->qstats.backlog -= len;
sch->q.qlen--;
return len;
}
struct red_sched_data *q = qdisc_priv(sch);
qdisc_reset(q->qdisc);
+ sch->qstats.backlog = 0;
sch->q.qlen = 0;
red_restart(&q->vars);
}
return ret;
}
+ qdisc_qstats_backlog_inc(sch, skb);
sch->q.qlen++;
return NET_XMIT_SUCCESS;
}
unsigned int len = 0;
if (q->qdisc->ops->drop && (len = q->qdisc->ops->drop(q->qdisc)) != 0) {
+ sch->qstats.backlog -= len;
sch->q.qlen--;
qdisc_qstats_drop(sch);
}
q->t_c = now;
q->tokens = toks;
q->ptokens = ptoks;
+ qdisc_qstats_backlog_dec(sch, skb);
sch->q.qlen--;
qdisc_unthrottled(sch);
qdisc_bstats_update(sch, skb);
struct tbf_sched_data *q = qdisc_priv(sch);
qdisc_reset(q->qdisc);
+ sch->qstats.backlog = 0;
sch->q.qlen = 0;
q->t_c = ktime_get_ns();
q->tokens = q->buffer;
if (cb->args[4] < cb->args[1])
goto next;
+ if ((r->idiag_states & ~TCPF_LISTEN) && !list_empty(&ep->asocs))
+ goto next;
+
if (r->sdiag_family != AF_UNSPEC &&
sk->sk_family != r->sdiag_family)
goto next;
info->sctpi_s_disable_fragments = sp->disable_fragments;
info->sctpi_s_v4mapped = sp->v4mapped;
info->sctpi_s_frag_interleave = sp->frag_interleave;
+ info->sctpi_s_type = sp->type;
return 0;
}
struct nlattr **attrs)
{
struct nlattr *bearer[TIPC_NLA_BEARER_MAX + 1];
+ int err;
+
+ if (!attrs[TIPC_NLA_BEARER])
+ return -EINVAL;
- nla_parse_nested(bearer, TIPC_NLA_BEARER_MAX, attrs[TIPC_NLA_BEARER],
- NULL);
+ err = nla_parse_nested(bearer, TIPC_NLA_BEARER_MAX,
+ attrs[TIPC_NLA_BEARER], NULL);
+ if (err)
+ return err;
return tipc_add_tlv(msg->rep, TIPC_TLV_BEARER_NAME,
nla_data(bearer[TIPC_NLA_BEARER_NAME]),
struct nlattr *link[TIPC_NLA_LINK_MAX + 1];
struct nlattr *prop[TIPC_NLA_PROP_MAX + 1];
struct nlattr *stats[TIPC_NLA_STATS_MAX + 1];
+ int err;
- nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK], NULL);
+ if (!attrs[TIPC_NLA_LINK])
+ return -EINVAL;
- nla_parse_nested(prop, TIPC_NLA_PROP_MAX, link[TIPC_NLA_LINK_PROP],
- NULL);
+ err = nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK],
+ NULL);
+ if (err)
+ return err;
+
+ if (!link[TIPC_NLA_LINK_PROP])
+ return -EINVAL;
- nla_parse_nested(stats, TIPC_NLA_STATS_MAX, link[TIPC_NLA_LINK_STATS],
- NULL);
+ err = nla_parse_nested(prop, TIPC_NLA_PROP_MAX,
+ link[TIPC_NLA_LINK_PROP], NULL);
+ if (err)
+ return err;
+
+ if (!link[TIPC_NLA_LINK_STATS])
+ return -EINVAL;
+
+ err = nla_parse_nested(stats, TIPC_NLA_STATS_MAX,
+ link[TIPC_NLA_LINK_STATS], NULL);
+ if (err)
+ return err;
name = (char *)TLV_DATA(msg->req);
if (strcmp(name, nla_data(link[TIPC_NLA_LINK_NAME])) != 0)
{
struct nlattr *link[TIPC_NLA_LINK_MAX + 1];
struct tipc_link_info link_info;
+ int err;
- nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK], NULL);
+ if (!attrs[TIPC_NLA_LINK])
+ return -EINVAL;
+
+ err = nla_parse_nested(link, TIPC_NLA_LINK_MAX, attrs[TIPC_NLA_LINK],
+ NULL);
+ if (err)
+ return err;
link_info.dest = nla_get_flag(link[TIPC_NLA_LINK_DEST]);
link_info.up = htonl(nla_get_flag(link[TIPC_NLA_LINK_UP]));
- strcpy(link_info.str, nla_data(link[TIPC_NLA_LINK_NAME]));
+ nla_strlcpy(link_info.str, nla_data(link[TIPC_NLA_LINK_NAME]),
+ TIPC_MAX_LINK_NAME);
return tipc_add_tlv(msg->rep, TIPC_TLV_LINK_INFO,
&link_info, sizeof(link_info));
u32 node, depth, type, lowbound, upbound;
static const char * const scope_str[] = {"", " zone", " cluster",
" node"};
+ int err;
- nla_parse_nested(nt, TIPC_NLA_NAME_TABLE_MAX,
- attrs[TIPC_NLA_NAME_TABLE], NULL);
+ if (!attrs[TIPC_NLA_NAME_TABLE])
+ return -EINVAL;
- nla_parse_nested(publ, TIPC_NLA_PUBL_MAX, nt[TIPC_NLA_NAME_TABLE_PUBL],
- NULL);
+ err = nla_parse_nested(nt, TIPC_NLA_NAME_TABLE_MAX,
+ attrs[TIPC_NLA_NAME_TABLE], NULL);
+ if (err)
+ return err;
+
+ if (!nt[TIPC_NLA_NAME_TABLE_PUBL])
+ return -EINVAL;
+
+ err = nla_parse_nested(publ, TIPC_NLA_PUBL_MAX,
+ nt[TIPC_NLA_NAME_TABLE_PUBL], NULL);
+ if (err)
+ return err;
ntq = (struct tipc_name_table_query *)TLV_DATA(msg->req);
{
u32 type, lower, upper;
struct nlattr *publ[TIPC_NLA_PUBL_MAX + 1];
+ int err;
- nla_parse_nested(publ, TIPC_NLA_PUBL_MAX, attrs[TIPC_NLA_PUBL], NULL);
+ if (!attrs[TIPC_NLA_PUBL])
+ return -EINVAL;
+
+ err = nla_parse_nested(publ, TIPC_NLA_PUBL_MAX, attrs[TIPC_NLA_PUBL],
+ NULL);
+ if (err)
+ return err;
type = nla_get_u32(publ[TIPC_NLA_PUBL_TYPE]);
lower = nla_get_u32(publ[TIPC_NLA_PUBL_LOWER]);
u32 sock_ref;
struct nlattr *sock[TIPC_NLA_SOCK_MAX + 1];
- nla_parse_nested(sock, TIPC_NLA_SOCK_MAX, attrs[TIPC_NLA_SOCK], NULL);
+ if (!attrs[TIPC_NLA_SOCK])
+ return -EINVAL;
+
+ err = nla_parse_nested(sock, TIPC_NLA_SOCK_MAX, attrs[TIPC_NLA_SOCK],
+ NULL);
+ if (err)
+ return err;
sock_ref = nla_get_u32(sock[TIPC_NLA_SOCK_REF]);
tipc_tlv_sprintf(msg->rep, "%u:", sock_ref);
struct nlattr **attrs)
{
struct nlattr *media[TIPC_NLA_MEDIA_MAX + 1];
+ int err;
+
+ if (!attrs[TIPC_NLA_MEDIA])
+ return -EINVAL;
- nla_parse_nested(media, TIPC_NLA_MEDIA_MAX, attrs[TIPC_NLA_MEDIA],
- NULL);
+ err = nla_parse_nested(media, TIPC_NLA_MEDIA_MAX, attrs[TIPC_NLA_MEDIA],
+ NULL);
+ if (err)
+ return err;
return tipc_add_tlv(msg->rep, TIPC_TLV_MEDIA_NAME,
nla_data(media[TIPC_NLA_MEDIA_NAME]),
{
struct tipc_node_info node_info;
struct nlattr *node[TIPC_NLA_NODE_MAX + 1];
+ int err;
- nla_parse_nested(node, TIPC_NLA_NODE_MAX, attrs[TIPC_NLA_NODE], NULL);
+ if (!attrs[TIPC_NLA_NODE])
+ return -EINVAL;
+
+ err = nla_parse_nested(node, TIPC_NLA_NODE_MAX, attrs[TIPC_NLA_NODE],
+ NULL);
+ if (err)
+ return err;
node_info.addr = htonl(nla_get_u32(node[TIPC_NLA_NODE_ADDR]));
node_info.up = htonl(nla_get_flag(node[TIPC_NLA_NODE_UP]));
{
__be32 id;
struct nlattr *net[TIPC_NLA_NET_MAX + 1];
+ int err;
+
+ if (!attrs[TIPC_NLA_NET])
+ return -EINVAL;
+
+ err = nla_parse_nested(net, TIPC_NLA_NET_MAX, attrs[TIPC_NLA_NET],
+ NULL);
+ if (err)
+ return err;
- nla_parse_nested(net, TIPC_NLA_NET_MAX, attrs[TIPC_NLA_NET], NULL);
id = htonl(nla_get_u32(net[TIPC_NLA_NET_ID]));
return tipc_add_tlv(msg->rep, TIPC_TLV_UNSIGNED, &id, sizeof(id));
WARN_ON(ops->remain_on_channel && !ops->cancel_remain_on_channel);
WARN_ON(ops->tdls_channel_switch && !ops->tdls_cancel_channel_switch);
WARN_ON(ops->add_tx_ts && !ops->del_tx_ts);
- WARN_ON(ops->set_tx_power && !ops->get_tx_power);
- WARN_ON(ops->set_antenna && !ops->get_antenna);
alloc_size = sizeof(*rdev) + sizeof_priv;
return private(dev, iwr, cmd, info, handler);
}
/* Old driver API : call driver ioctl handler */
- if (dev->netdev_ops->ndo_do_ioctl)
- return dev->netdev_ops->ndo_do_ioctl(dev, ifr, cmd);
+ if (dev->netdev_ops->ndo_do_ioctl) {
+#ifdef CONFIG_COMPAT
+ if (info->flags & IW_REQUEST_FLAG_COMPAT) {
+ int ret = 0;
+ struct iwreq iwr_lcl;
+ struct compat_iw_point *iwp_compat = (void *) &iwr->u.data;
+
+ memcpy(&iwr_lcl, iwr, sizeof(struct iwreq));
+ iwr_lcl.u.data.pointer = compat_ptr(iwp_compat->pointer);
+ iwr_lcl.u.data.length = iwp_compat->length;
+ iwr_lcl.u.data.flags = iwp_compat->flags;
+
+ ret = dev->netdev_ops->ndo_do_ioctl(dev, (void *) &iwr_lcl, cmd);
+
+ iwp_compat->pointer = ptr_to_compat(iwr_lcl.u.data.pointer);
+ iwp_compat->length = iwr_lcl.u.data.length;
+ iwp_compat->flags = iwr_lcl.u.data.flags;
+
+ return ret;
+ } else
+#endif
+ return dev->netdev_ops->ndo_do_ioctl(dev, ifr, cmd);
+ }
return -EOPNOTSUPP;
}
# Check for git id commit length and improperly formed commit descriptions
if ($in_commit_log && !$commit_log_possible_stack_dump &&
+ $line !~ /^\s*(?:Link|Patchwork|http|BugLink):/i &&
($line =~ /\bcommit\s+[0-9a-f]{5,}\b/i ||
($line =~ /\b[0-9a-f]{12,40}\b/i &&
$line !~ /[\<\[][0-9a-f]{12,40}[\>\]]/i &&
len = sprintf(alias, "of:N%sT%s", (*name)[0] ? *name : "*",
(*type)[0] ? *type : "*");
- if (compatible[0])
+ if ((*compatible)[0])
sprintf(&alias[len], "%sC%s", (*type)[0] ? "*" : "",
*compatible);
case KEYCTL_DH_COMPUTE:
return keyctl_dh_compute(compat_ptr(arg2), compat_ptr(arg3),
- arg4);
+ arg4, compat_ptr(arg5));
default:
return -EOPNOTSUPP;
}
long keyctl_dh_compute(struct keyctl_dh_params __user *params,
- char __user *buffer, size_t buflen)
+ char __user *buffer, size_t buflen,
+ void __user *reserved)
{
long ret;
MPI base, private, prime, result;
goto out;
}
+ if (reserved) {
+ ret = -EINVAL;
+ goto out;
+ }
+
keylen = mpi_from_key(pcopy.prime, buflen, &prime);
if (keylen < 0 || !prime) {
/* buflen == 0 may be used to query the required buffer size,
#ifdef CONFIG_KEY_DH_OPERATIONS
extern long keyctl_dh_compute(struct keyctl_dh_params __user *, char __user *,
- size_t);
+ size_t, void __user *);
#else
static inline long keyctl_dh_compute(struct keyctl_dh_params __user *params,
- char __user *buffer, size_t buflen)
+ char __user *buffer, size_t buflen,
+ void __user *reserved)
{
return -EOPNOTSUPP;
}
case KEYCTL_DH_COMPUTE:
return keyctl_dh_compute((struct keyctl_dh_params __user *) arg2,
- (char __user *) arg3,
- (size_t) arg4);
+ (char __user *) arg3, (size_t) arg4,
+ (void __user *) arg5);
default:
return -EOPNOTSUPP;
#define IS_SKL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa170)
#define IS_SKL_LP(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x9d70)
+#define IS_KBL(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0xa171)
+#define IS_KBL_LP(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x9d71)
#define IS_BXT(pci) ((pci)->vendor == 0x8086 && (pci)->device == 0x5a98)
-#define IS_SKL_PLUS(pci) (IS_SKL(pci) || IS_SKL_LP(pci) || IS_BXT(pci))
+#define IS_SKL_PLUS(pci) (IS_SKL(pci) || IS_SKL_LP(pci) || IS_BXT(pci)) || \
+ IS_KBL(pci) || IS_KBL_LP(pci)
static char *driver_short_names[] = {
[AZX_DRIVER_ICH] = "HDA Intel",
/* Sunrise Point-LP */
{ PCI_DEVICE(0x8086, 0x9d70),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_SKYLAKE },
+ /* Kabylake */
+ { PCI_DEVICE(0x8086, 0xa171),
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_SKYLAKE },
+ /* Kabylake-LP */
+ { PCI_DEVICE(0x8086, 0x9d71),
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_SKYLAKE },
/* Broxton-P(Apollolake) */
{ PCI_DEVICE(0x8086, 0x5a98),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_BROXTON },
case 0x10ec0234:
case 0x10ec0274:
case 0x10ec0294:
+ case 0x10ec0700:
+ case 0x10ec0701:
+ case 0x10ec0703:
alc_update_coef_idx(codec, 0x10, 1<<15, 0);
break;
case 0x10ec0662:
ALC269_TYPE_ALC256,
ALC269_TYPE_ALC225,
ALC269_TYPE_ALC294,
+ ALC269_TYPE_ALC700,
};
/*
case ALC269_TYPE_ALC256:
case ALC269_TYPE_ALC225:
case ALC269_TYPE_ALC294:
+ case ALC269_TYPE_ALC700:
ssids = alc269_ssids;
break;
default:
static void alc_headset_mode_unplugged(struct hda_codec *codec)
{
static struct coef_fw coef0255[] = {
- WRITE_COEF(0x1b, 0x0c0b), /* LDO and MISC control */
WRITE_COEF(0x45, 0xd089), /* UAJ function set to menual mode */
UPDATE_COEFEX(0x57, 0x05, 1<<14, 0), /* Direct Drive HP Amp control(Set to verb control)*/
WRITE_COEF(0x06, 0x6104), /* Set MIC2 Vref gate with HP */
WRITE_COEFEX(0x57, 0x03, 0x8aa6), /* Direct Drive HP Amp control */
{}
};
+ static struct coef_fw coef0255_1[] = {
+ WRITE_COEF(0x1b, 0x0c0b), /* LDO and MISC control */
+ {}
+ };
+ static struct coef_fw coef0256[] = {
+ WRITE_COEF(0x1b, 0x0c4b), /* LDO and MISC control */
+ {}
+ };
static struct coef_fw coef0233[] = {
WRITE_COEF(0x1b, 0x0c0b),
WRITE_COEF(0x45, 0xc429),
switch (codec->core.vendor_id) {
case 0x10ec0255:
+ alc_process_coef_fw(codec, coef0255_1);
+ alc_process_coef_fw(codec, coef0255);
+ break;
case 0x10ec0256:
+ alc_process_coef_fw(codec, coef0256);
alc_process_coef_fw(codec, coef0255);
break;
case 0x10ec0233:
WRITE_COEFEX(0x57, 0x03, 0x8ea6),
{}
};
+ static struct coef_fw coef0256[] = {
+ WRITE_COEF(0x45, 0xd489), /* Set to CTIA type */
+ WRITE_COEF(0x1b, 0x0c6b),
+ WRITE_COEFEX(0x57, 0x03, 0x8ea6),
+ {}
+ };
static struct coef_fw coef0233[] = {
WRITE_COEF(0x45, 0xd429),
WRITE_COEF(0x1b, 0x0c2b),
switch (codec->core.vendor_id) {
case 0x10ec0255:
- case 0x10ec0256:
alc_process_coef_fw(codec, coef0255);
break;
+ case 0x10ec0256:
+ alc_process_coef_fw(codec, coef0256);
+ break;
case 0x10ec0233:
case 0x10ec0283:
alc_process_coef_fw(codec, coef0233);
WRITE_COEFEX(0x57, 0x03, 0x8ea6),
{}
};
+ static struct coef_fw coef0256[] = {
+ WRITE_COEF(0x45, 0xe489), /* Set to OMTP Type */
+ WRITE_COEF(0x1b, 0x0c6b),
+ WRITE_COEFEX(0x57, 0x03, 0x8ea6),
+ {}
+ };
static struct coef_fw coef0233[] = {
WRITE_COEF(0x45, 0xe429),
WRITE_COEF(0x1b, 0x0c2b),
switch (codec->core.vendor_id) {
case 0x10ec0255:
- case 0x10ec0256:
alc_process_coef_fw(codec, coef0255);
break;
+ case 0x10ec0256:
+ alc_process_coef_fw(codec, coef0256);
+ break;
case 0x10ec0233:
case 0x10ec0283:
alc_process_coef_fw(codec, coef0233);
static void alc255_set_default_jack_type(struct hda_codec *codec)
{
/* Set to iphone type */
- static struct coef_fw fw[] = {
+ static struct coef_fw alc255fw[] = {
WRITE_COEF(0x1b, 0x880b),
WRITE_COEF(0x45, 0xd089),
WRITE_COEF(0x1b, 0x080b),
WRITE_COEF(0x1b, 0x0c0b),
{}
};
- alc_process_coef_fw(codec, fw);
+ static struct coef_fw alc256fw[] = {
+ WRITE_COEF(0x1b, 0x884b),
+ WRITE_COEF(0x45, 0xd089),
+ WRITE_COEF(0x1b, 0x084b),
+ WRITE_COEF(0x46, 0x0004),
+ WRITE_COEF(0x1b, 0x0c4b),
+ {}
+ };
+ switch (codec->core.vendor_id) {
+ case 0x10ec0255:
+ alc_process_coef_fw(codec, alc255fw);
+ break;
+ case 0x10ec0256:
+ alc_process_coef_fw(codec, alc256fw);
+ break;
+ }
msleep(30);
}
SND_PCI_QUIRK(0x17aa, 0x2218, "Thinkpad X1 Carbon 2nd", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2223, "ThinkPad T550", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2226, "ThinkPad X250", ALC292_FIXUP_TPT440_DOCK),
+ SND_PCI_QUIRK(0x17aa, 0x2231, "Thinkpad T560", ALC292_FIXUP_TPT460),
SND_PCI_QUIRK(0x17aa, 0x2233, "Thinkpad", ALC292_FIXUP_TPT460),
SND_PCI_QUIRK(0x17aa, 0x30bb, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
SND_PCI_QUIRK(0x17aa, 0x30e2, "ThinkCentre AIO", ALC233_FIXUP_LENOVO_LINE2_MIC_HOTKEY),
{0x12, 0x90a60180},
{0x14, 0x90170130},
{0x21, 0x02211040}),
+ SND_HDA_PIN_QUIRK(0x10ec0255, 0x1028, "Dell Inspiron 5565", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
+ {0x12, 0x90a60180},
+ {0x14, 0x90170120},
+ {0x21, 0x02211030}),
SND_HDA_PIN_QUIRK(0x10ec0256, 0x1028, "Dell", ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
{0x12, 0x90a60160},
{0x14, 0x90170120},
case 0x10ec0294:
spec->codec_variant = ALC269_TYPE_ALC294;
break;
+ case 0x10ec0700:
+ case 0x10ec0701:
+ case 0x10ec0703:
+ spec->codec_variant = ALC269_TYPE_ALC700;
+ spec->gen.mixer_nid = 0; /* ALC700 does not have any loopback mixer path */
+ alc_update_coef_idx(codec, 0x4a, 0, 1 << 15); /* Combo jack auto trigger control */
+ break;
+
}
if (snd_hda_codec_read(codec, 0x51, 0, AC_VERB_PARAMETERS, 0) == 0x10ec5505) {
HDA_CODEC_ENTRY(0x10ec0670, "ALC670", patch_alc662),
HDA_CODEC_ENTRY(0x10ec0671, "ALC671", patch_alc662),
HDA_CODEC_ENTRY(0x10ec0680, "ALC680", patch_alc680),
+ HDA_CODEC_ENTRY(0x10ec0700, "ALC700", patch_alc269),
+ HDA_CODEC_ENTRY(0x10ec0701, "ALC701", patch_alc269),
+ HDA_CODEC_ENTRY(0x10ec0703, "ALC703", patch_alc269),
HDA_CODEC_ENTRY(0x10ec0867, "ALC891", patch_alc882),
HDA_CODEC_ENTRY(0x10ec0880, "ALC880", patch_alc880),
HDA_CODEC_ENTRY(0x10ec0882, "ALC882", patch_alc882),
return (value_int & value_mask) | ~value_mask;
}
+static int string_set_value(struct bt_ctf_field *field, const char *string)
+{
+ char *buffer = NULL;
+ size_t len = strlen(string), i, p;
+ int err;
+
+ for (i = p = 0; i < len; i++, p++) {
+ if (isprint(string[i])) {
+ if (!buffer)
+ continue;
+ buffer[p] = string[i];
+ } else {
+ char numstr[5];
+
+ snprintf(numstr, sizeof(numstr), "\\x%02x",
+ (unsigned int)(string[i]) & 0xff);
+
+ if (!buffer) {
+ buffer = zalloc(i + (len - i) * 4 + 2);
+ if (!buffer) {
+ pr_err("failed to set unprintable string '%s'\n", string);
+ return bt_ctf_field_string_set_value(field, "UNPRINTABLE-STRING");
+ }
+ if (i > 0)
+ strncpy(buffer, string, i);
+ }
+ strncat(buffer + p, numstr, 4);
+ p += 3;
+ }
+ }
+
+ if (!buffer)
+ return bt_ctf_field_string_set_value(field, string);
+ err = bt_ctf_field_string_set_value(field, buffer);
+ free(buffer);
+ return err;
+}
+
static int add_tracepoint_field_value(struct ctf_writer *cw,
struct bt_ctf_event_class *event_class,
struct bt_ctf_event *event,
}
if (flags & FIELD_IS_STRING)
- ret = bt_ctf_field_string_set_value(field,
- data + offset + i * len);
+ ret = string_set_value(field, data + offset + i * len);
else {
unsigned long long value_int;
int err;
union perf_event *event;
+ if (symbol_conf.kptr_restrict)
+ return -1;
if (map == NULL)
return -1;
static bool symbol__read_kptr_restrict(void)
{
bool value = false;
+ FILE *fp = fopen("/proc/sys/kernel/kptr_restrict", "r");
- if (geteuid() != 0) {
- FILE *fp = fopen("/proc/sys/kernel/kptr_restrict", "r");
- if (fp != NULL) {
- char line[8];
+ if (fp != NULL) {
+ char line[8];
- if (fgets(line, sizeof(line), fp) != NULL)
- value = atoi(line) != 0;
+ if (fgets(line, sizeof(line), fp) != NULL)
+ value = (geteuid() != 0) ?
+ (atoi(line) != 0) :
+ (atoi(line) == 2);
- fclose(fp);
- }
+ fclose(fp);
}
return value;
memset(&attr, 0, sizeof(attr));
attr.prog_type = BPF_PROG_TYPE_SOCKET_FILTER;
attr.insn_cnt = ARRAY_SIZE(prog);
- attr.insns = (uint64_t)prog;
- attr.license = (uint64_t)bpf_license;
- attr.log_buf = (uint64_t)bpf_log_buf;
+ attr.insns = (unsigned long) &prog;
+ attr.license = (unsigned long) &bpf_license;
+ attr.log_buf = (unsigned long) &bpf_log_buf;
attr.log_size = sizeof(bpf_log_buf);
attr.log_level = 1;
attr.kern_version = 0;
memset(&eprog, 0, sizeof(eprog));
eprog.prog_type = BPF_PROG_TYPE_SOCKET_FILTER;
eprog.insn_cnt = ARRAY_SIZE(ecode);
- eprog.insns = (uint64_t)ecode;
- eprog.license = (uint64_t)bpf_license;
+ eprog.insns = (unsigned long) &ecode;
+ eprog.license = (unsigned long) &bpf_license;
eprog.kern_version = 0;
memset(&cprog, 0, sizeof(cprog));
if (!(vcpu->arch.vgic_cpu.live_lrs & (1UL << i)))
continue;
- if (cpu_if->vgic_elrsr & (1UL << i)) {
+ if (cpu_if->vgic_elrsr & (1UL << i))
cpu_if->vgic_lr[i] &= ~GICH_LR_STATE;
- continue;
- }
+ else
+ cpu_if->vgic_lr[i] = readl_relaxed(base + GICH_LR0 + (i * 4));
- cpu_if->vgic_lr[i] = readl_relaxed(base + GICH_LR0 + (i * 4));
writel_relaxed(0, base + GICH_LR0 + (i * 4));
}
}
* other thread sync back the IRQ.
*/
while (irq->vcpu && /* IRQ may have state in an LR somewhere */
- irq->vcpu->cpu != -1) { /* VCPU thread is running */
- BUG_ON(irq->intid < VGIC_NR_PRIVATE_IRQS);
+ irq->vcpu->cpu != -1) /* VCPU thread is running */
cond_resched_lock(&irq->irq_lock);
- }
irq->active = new_active_state;
if (new_active_state)
}
}
- /* Clear soft pending state when level IRQs have been acked */
- if (irq->config == VGIC_CONFIG_LEVEL &&
- !(val & GICH_LR_PENDING_BIT)) {
- irq->soft_pending = false;
- irq->pending = irq->line_level;
+ /*
+ * Clear soft pending state when level irqs have been acked.
+ * Always regenerate the pending state.
+ */
+ if (irq->config == VGIC_CONFIG_LEVEL) {
+ if (!(val & GICH_LR_PENDING_BIT))
+ irq->soft_pending = false;
+
+ irq->pending = irq->line_level || irq->soft_pending;
}
spin_unlock(&irq->irq_lock);
}
}
- /* Clear soft pending state when level irqs have been acked */
- if (irq->config == VGIC_CONFIG_LEVEL &&
- !(val & ICH_LR_PENDING_BIT)) {
- irq->soft_pending = false;
- irq->pending = irq->line_level;
+ /*
+ * Clear soft pending state when level irqs have been acked.
+ * Always regenerate the pending state.
+ */
+ if (irq->config == VGIC_CONFIG_LEVEL) {
+ if (!(val & ICH_LR_PENDING_BIT))
+ irq->soft_pending = false;
+
+ irq->pending = irq->line_level || irq->soft_pending;
}
spin_unlock(&irq->irq_lock);
irq_rt = srcu_dereference_check(kvm->irq_routing, &kvm->irq_srcu,
lockdep_is_held(&kvm->irq_lock));
- if (gsi < irq_rt->nr_rt_entries) {
+ if (irq_rt && gsi < irq_rt->nr_rt_entries) {
hlist_for_each_entry(e, &irq_rt->map[gsi], link) {
entries[n] = *e;
++n;
case KVM_SET_GSI_ROUTING: {
struct kvm_irq_routing routing;
struct kvm_irq_routing __user *urouting;
- struct kvm_irq_routing_entry *entries;
+ struct kvm_irq_routing_entry *entries = NULL;
r = -EFAULT;
if (copy_from_user(&routing, argp, sizeof(routing)))
goto out;
if (routing.flags)
goto out;
- r = -ENOMEM;
- entries = vmalloc(routing.nr * sizeof(*entries));
- if (!entries)
- goto out;
- r = -EFAULT;
- urouting = argp;
- if (copy_from_user(entries, urouting->entries,
- routing.nr * sizeof(*entries)))
- goto out_free_irq_routing;
+ if (routing.nr) {
+ r = -ENOMEM;
+ entries = vmalloc(routing.nr * sizeof(*entries));
+ if (!entries)
+ goto out;
+ r = -EFAULT;
+ urouting = argp;
+ if (copy_from_user(entries, urouting->entries,
+ routing.nr * sizeof(*entries)))
+ goto out_free_irq_routing;
+ }
r = kvm_set_irq_routing(kvm, entries, routing.nr,
routing.flags);
out_free_irq_routing:
projects / cascardo / linux.git / commitdiff