ipmi: run to completion fixes

The "run_to_completion" mode was somewhat broken.  Locks need to be avoided in
run_to_completion mode, and it shouldn't be used by normal users, just
internally for panic situations.

This patch removes locks in run_to_completion mode and removes the user call
for setting the mode.  The only user was the poweroff code, but it was easily
converted to use the polling interface.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 32b2b22..9f0075c 100644 (file)
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -1197,13 +1197,6 @@ int ipmi_unregister_for_cmd(ipmi_user_t   user,
        return rv;
 }
 
-void ipmi_user_set_run_to_completion(ipmi_user_t user, int val)
-{
-       ipmi_smi_t intf = user->intf;
-       if (intf->handlers)
-               intf->handlers->set_run_to_completion(intf->send_info, val);
-}
-
 static unsigned char
 ipmb_checksum(unsigned char *data, int size)
 {
@@ -4190,5 +4183,4 @@ EXPORT_SYMBOL(ipmi_get_my_address);
 EXPORT_SYMBOL(ipmi_set_my_LUN);
 EXPORT_SYMBOL(ipmi_get_my_LUN);
 EXPORT_SYMBOL(ipmi_smi_add_proc_entry);
-EXPORT_SYMBOL(ipmi_user_set_run_to_completion);
 EXPORT_SYMBOL(ipmi_free_recv_msg);

diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c
index b86186d..b065a53 100644 (file)
--- a/drivers/char/ipmi/ipmi_poweroff.c
+++ b/drivers/char/ipmi/ipmi_poweroff.c
@@ -99,11 +99,14 @@ static unsigned char ipmi_version;
    allocate them, since we may be in a panic situation.  The whole
    thing is single-threaded, anyway, so multiple messages are not
    required. */
+static atomic_t dummy_count = ATOMIC_INIT(0);
 static void dummy_smi_free(struct ipmi_smi_msg *msg)
 {
+       atomic_dec(&dummy_count);
 }
 static void dummy_recv_free(struct ipmi_recv_msg *msg)
 {
+       atomic_dec(&dummy_count);
 }
 static struct ipmi_smi_msg halt_smi_msg =
 {
@@ -152,17 +155,28 @@ static int ipmi_request_wait_for_response(ipmi_user_t            user,
        return halt_recv_msg.msg.data[0];
 }
 
-/* We are in run-to-completion mode, no completion is desired. */
+/* Wait for message to complete, spinning. */
 static int ipmi_request_in_rc_mode(ipmi_user_t            user,
                                   struct ipmi_addr       *addr,
                                   struct kernel_ipmi_msg *send_msg)
 {
        int rv;
 
+       atomic_set(&dummy_count, 2);
        rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL,
                                      &halt_smi_msg, &halt_recv_msg, 0);
-       if (rv)
+       if (rv) {
+               atomic_set(&dummy_count, 0);
                return rv;
+       }
+
+       /*
+        * Spin until our message is done.
+        */
+       while (atomic_read(&dummy_count) > 0) {
+               ipmi_poll_interface(user);
+               cpu_relax();
+       }
 
        return halt_recv_msg.msg.data[0];
 }
@@ -531,9 +545,7 @@ static void ipmi_poweroff_function (void)
                return;
 
        /* Use run-to-completion mode, since interrupts may be off. */
-       ipmi_user_set_run_to_completion(ipmi_user, 1);
        specific_poweroff_func(ipmi_user);
-       ipmi_user_set_run_to_completion(ipmi_user, 0);
 }
 
 /* Wait for an IPMI interface to be installed, the first one installed

diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 1a8c1ca..30f5356 100644 (file)
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -806,56 +806,53 @@ static void sender(void                *send_info,
                return;
        }
 
-       spin_lock_irqsave(&(smi_info->msg_lock), flags);
 #ifdef DEBUG_TIMING
        do_gettimeofday(&t);
        printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec);
 #endif
 
        if (smi_info->run_to_completion) {
-               /* If we are running to completion, then throw it in
-                  the list and run transactions until everything is
-                  clear.  Priority doesn't matter here. */
+               /*
+                * If we are running to completion, then throw it in
+                * the list and run transactions until everything is
+                * clear.  Priority doesn't matter here.
+                */
+
+               /*
+                * Run to completion means we are single-threaded, no
+                * need for locks.
+                */
                list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
 
-               /* We have to release the msg lock and claim the smi
-                  lock in this case, because of race conditions. */
-               spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
-
-               spin_lock_irqsave(&(smi_info->si_lock), flags);
                result = smi_event_handler(smi_info, 0);
                while (result != SI_SM_IDLE) {
                        udelay(SI_SHORT_TIMEOUT_USEC);
                        result = smi_event_handler(smi_info,
                                                   SI_SHORT_TIMEOUT_USEC);
                }
-               spin_unlock_irqrestore(&(smi_info->si_lock), flags);
                return;
-       } else {
-               if (priority > 0) {
-                       list_add_tail(&(msg->link), &(smi_info->hp_xmit_msgs));
-               } else {
-                       list_add_tail(&(msg->link), &(smi_info->xmit_msgs));
-               }
        }
-       spin_unlock_irqrestore(&(smi_info->msg_lock), flags);
 
-       spin_lock_irqsave(&(smi_info->si_lock), flags);
+       spin_lock_irqsave(&smi_info->msg_lock, flags);
+       if (priority > 0)
+               list_add_tail(&msg->link, &smi_info->hp_xmit_msgs);
+       else
+               list_add_tail(&msg->link, &smi_info->xmit_msgs);
+       spin_unlock_irqrestore(&smi_info->msg_lock, flags);
+
+       spin_lock_irqsave(&smi_info->si_lock, flags);
        if ((smi_info->si_state == SI_NORMAL)
            && (smi_info->curr_msg == NULL))
        {
                start_next_msg(smi_info);
        }
-       spin_unlock_irqrestore(&(smi_info->si_lock), flags);
+       spin_unlock_irqrestore(&smi_info->si_lock, flags);
 }
 
 static void set_run_to_completion(void *send_info, int i_run_to_completion)
 {
        struct smi_info   *smi_info = send_info;
        enum si_sm_result result;
-       unsigned long     flags;
-
-       spin_lock_irqsave(&(smi_info->si_lock), flags);
 
        smi_info->run_to_completion = i_run_to_completion;
        if (i_run_to_completion) {
@@ -866,8 +863,6 @@ static void set_run_to_completion(void *send_info, int i_run_to_completion)
                                                   SI_SHORT_TIMEOUT_USEC);
                }
        }
-
-       spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 }
 
 static int ipmi_thread(void *data)

diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index c5bd28b..1144b32 100644 (file)
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -368,9 +368,8 @@ int ipmi_request_supply_msgs(ipmi_user_t          user,
  * Poll the IPMI interface for the user.  This causes the IPMI code to
  * do an immediate check for information from the driver and handle
  * anything that is immediately pending.  This will not block in any
- * way.  This is useful if you need to implement polling from the user
- * for things like modifying the watchdog timeout when a panic occurs
- * or disabling the watchdog timer on a reboot.
+ * way.  This is useful if you need to spin waiting for something to
+ * happen in the IPMI driver.
  */
 void ipmi_poll_interface(ipmi_user_t user);
 
@@ -421,12 +420,6 @@ int ipmi_unregister_for_cmd(ipmi_user_t   user,
 int ipmi_get_maintenance_mode(ipmi_user_t user);
 int ipmi_set_maintenance_mode(ipmi_user_t user, int mode);
 
-/*
- * Allow run-to-completion mode to be set for the interface of
- * a specific user.
- */
-void ipmi_user_set_run_to_completion(ipmi_user_t user, int val);
-
 /*
  * When the user is created, it will not receive IPMI events by
  * default.  The user must set this to TRUE to get incoming events.