--- /dev/null
+Kernel driver for Mellanox systems LEDs
+=======================================
+
+Provide system LED support for the nex Mellanox systems:
+"msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
+"msn2410", "msb7800", "msn2740", "msn2100".
+
+Description
+-----------
+Driver provides the following LEDs for the systems "msx6710", "msx6720",
+"msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740":
+ mlxcpld:fan1:green
+ mlxcpld:fan1:red
+ mlxcpld:fan2:green
+ mlxcpld:fan2:red
+ mlxcpld:fan3:green
+ mlxcpld:fan3:red
+ mlxcpld:fan4:green
+ mlxcpld:fan4:red
+ mlxcpld:psu:green
+ mlxcpld:psu:red
+ mlxcpld:status:green
+ mlxcpld:status:red
+
+ "status"
+ CPLD reg offset: 0x20
+ Bits [3:0]
+
+ "psu"
+ CPLD reg offset: 0x20
+ Bits [7:4]
+
+ "fan1"
+ CPLD reg offset: 0x21
+ Bits [3:0]
+
+ "fan2"
+ CPLD reg offset: 0x21
+ Bits [7:4]
+
+ "fan3"
+ CPLD reg offset: 0x22
+ Bits [3:0]
+
+ "fan4"
+ CPLD reg offset: 0x22
+ Bits [7:4]
+
+ Color mask for all the above LEDs:
+ [bit3,bit2,bit1,bit0] or
+ [bit7,bit6,bit5,bit4]:
+ [0,0,0,0] = LED OFF
+ [0,1,0,1] = Red static ON
+ [1,1,0,1] = Green static ON
+ [0,1,1,0] = Red blink 3Hz
+ [1,1,1,0] = Green blink 3Hz
+ [0,1,1,1] = Red blink 6Hz
+ [1,1,1,1] = Green blink 6Hz
+
+Driver provides the following LEDs for the system "msn2100":
+ mlxcpld:fan:green
+ mlxcpld:fan:red
+ mlxcpld:psu1:green
+ mlxcpld:psu1:red
+ mlxcpld:psu2:green
+ mlxcpld:psu2:red
+ mlxcpld:status:green
+ mlxcpld:status:red
+ mlxcpld:uid:blue
+
+ "status"
+ CPLD reg offset: 0x20
+ Bits [3:0]
+
+ "fan"
+ CPLD reg offset: 0x21
+ Bits [3:0]
+
+ "psu1"
+ CPLD reg offset: 0x23
+ Bits [3:0]
+
+ "psu2"
+ CPLD reg offset: 0x23
+ Bits [7:4]
+
+ "uid"
+ CPLD reg offset: 0x24
+ Bits [3:0]
+
+ Color mask for all the above LEDs, excepted uid:
+ [bit3,bit2,bit1,bit0] or
+ [bit7,bit6,bit5,bit4]:
+ [0,0,0,0] = LED OFF
+ [0,1,0,1] = Red static ON
+ [1,1,0,1] = Green static ON
+ [0,1,1,0] = Red blink 3Hz
+ [1,1,1,0] = Green blink 3Hz
+ [0,1,1,1] = Red blink 6Hz
+ [1,1,1,1] = Green blink 6Hz
+
+ Color mask for uid LED:
+ [bit3,bit2,bit1,bit0]:
+ [0,0,0,0] = LED OFF
+ [1,1,0,1] = Blue static ON
+ [1,1,1,0] = Blue blink 3Hz
+ [1,1,1,1] = Blue blink 6Hz
+
+Driver supports HW blinking at 3Hz and 6Hz frequency (50% duty cycle).
+For 3Hz duty cylce is about 167 msec, for 6Hz is about 83 msec.
--- /dev/null
+/*
+ * drivers/leds/leds-mlxcpld.c
+ * Copyright (c) 2016 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2016 Vadim Pasternak <vadimp@mellanox.com>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the names of the copyright holders nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 /* LPC bus access */
+
+/* Color codes for LEDs */
+#define MLXCPLD_LED_OFFSET_HALF 0x01 /* Offset from solid: 3Hz blink */
+#define MLXCPLD_LED_OFFSET_FULL 0x02 /* Offset from solid: 6Hz blink */
+#define MLXCPLD_LED_IS_OFF 0x00 /* Off */
+#define MLXCPLD_LED_RED_STATIC_ON 0x05 /* Solid red */
+#define MLXCPLD_LED_RED_BLINK_HALF (MLXCPLD_LED_RED_STATIC_ON + \
+ MLXCPLD_LED_OFFSET_HALF)
+#define MLXCPLD_LED_RED_BLINK_FULL (MLXCPLD_LED_RED_STATIC_ON + \
+ MLXCPLD_LED_OFFSET_FULL)
+#define MLXCPLD_LED_GREEN_STATIC_ON 0x0D /* Solid green */
+#define MLXCPLD_LED_GREEN_BLINK_HALF (MLXCPLD_LED_GREEN_STATIC_ON + \
+ MLXCPLD_LED_OFFSET_HALF)
+#define MLXCPLD_LED_GREEN_BLINK_FULL (MLXCPLD_LED_GREEN_STATIC_ON + \
+ MLXCPLD_LED_OFFSET_FULL)
+#define MLXCPLD_LED_BLINK_3HZ 167 /* ~167 msec off/on */
+#define MLXCPLD_LED_BLINK_6HZ 83 /* ~83 msec off/on */
+
+/**
+ * mlxcpld_param - LED access parameters:
+ * @offset - offset for LED access in CPLD device
+ * @mask - mask for LED access in CPLD device
+ * @base_color - base color code for LED
+**/
+struct mlxcpld_param {
+ u8 offset;
+ u8 mask;
+ u8 base_color;
+};
+
+/**
+ * mlxcpld_led_priv - LED private data:
+ * @cled - LED class device instance
+ * @param - LED CPLD access parameters
+**/
+struct mlxcpld_led_priv {
+ struct led_classdev cdev;
+ struct mlxcpld_param param;
+};
+
+#define cdev_to_priv(c) container_of(c, struct mlxcpld_led_priv, cdev)
+
+/**
+ * mlxcpld_led_profile - system LED profile (defined per system class):
+ * @offset - offset for LED access in CPLD device
+ * @mask - mask for LED access in CPLD device
+ * @base_color - base color code
+ * @brightness - default brightness setting (on/off)
+ * @name - LED name
+**/
+struct mlxcpld_led_profile {
+ u8 offset;
+ u8 mask;
+ u8 base_color;
+ enum led_brightness brightness;
+ const char *name;
+};
+
+/**
+ * mlxcpld_led_pdata - system LED private data
+ * @pdev - platform device pointer
+ * @pled - LED class device instance
+ * @profile - system configuration profile
+ * @num_led_instances - number of LED instances
+ * @lock - device access lock
+**/
+struct mlxcpld_led_pdata {
+ struct platform_device *pdev;
+ struct mlxcpld_led_priv *pled;
+ struct mlxcpld_led_profile *profile;
+ int num_led_instances;
+ spinlock_t lock;
+};
+
+static struct mlxcpld_led_pdata *mlxcpld_led;
+
+/* Default profile fit the next Mellanox systems:
+ * "msx6710", "msx6720", "msb7700", "msn2700", "msx1410",
+ * "msn2410", "msb7800", "msn2740"
+ */
+static struct mlxcpld_led_profile mlxcpld_led_default_profile[] = {
+ {
+ 0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+ "mlxcpld:fan1:green",
+ },
+ {
+ 0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+ "mlxcpld:fan1:red",
+ },
+ {
+ 0x21, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+ "mlxcpld:fan2:green",
+ },
+ {
+ 0x21, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+ "mlxcpld:fan2:red",
+ },
+ {
+ 0x22, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+ "mlxcpld:fan3:green",
+ },
+ {
+ 0x22, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+ "mlxcpld:fan3:red",
+ },
+ {
+ 0x22, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+ "mlxcpld:fan4:green",
+ },
+ {
+ 0x22, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+ "mlxcpld:fan4:red",
+ },
+ {
+ 0x20, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+ "mlxcpld:psu:green",
+ },
+ {
+ 0x20, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+ "mlxcpld:psu:red",
+ },
+ {
+ 0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+ "mlxcpld:status:green",
+ },
+ {
+ 0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+ "mlxcpld:status:red",
+ },
+};
+
+/* Profile fit the Mellanox systems based on "msn2100" */
+static struct mlxcpld_led_profile mlxcpld_led_msn2100_profile[] = {
+ {
+ 0x21, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+ "mlxcpld:fan:green",
+ },
+ {
+ 0x21, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+ "mlxcpld:fan:red",
+ },
+ {
+ 0x23, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+ "mlxcpld:psu1:green",
+ },
+ {
+ 0x23, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+ "mlxcpld:psu1:red",
+ },
+ {
+ 0x23, 0x0f, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+ "mlxcpld:psu2:green",
+ },
+ {
+ 0x23, 0x0f, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+ "mlxcpld:psu2:red",
+ },
+ {
+ 0x20, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, 1,
+ "mlxcpld:status:green",
+ },
+ {
+ 0x20, 0xf0, MLXCPLD_LED_RED_STATIC_ON, LED_OFF,
+ "mlxcpld:status:red",
+ },
+ {
+ 0x24, 0xf0, MLXCPLD_LED_GREEN_STATIC_ON, LED_OFF,
+ "mlxcpld:uid:blue",
+ },
+};
+
+enum mlxcpld_led_platform_types {
+ MLXCPLD_LED_PLATFORM_DEFAULT,
+ MLXCPLD_LED_PLATFORM_MSN2100,
+};
+
+static const char *mlx_product_names[] = {
+ "DEFAULT",
+ "MSN2100",
+};
+
+static enum
+mlxcpld_led_platform_types mlxcpld_led_platform_check_sys_type(void)
+{
+ const char *mlx_product_name;
+ int i;
+
+ mlx_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (!mlx_product_name)
+ return MLXCPLD_LED_PLATFORM_DEFAULT;
+
+ for (i = 1; i < ARRAY_SIZE(mlx_product_names); i++) {
+ if (strstr(mlx_product_name, mlx_product_names[i]))
+ return i;
+ }
+
+ return MLXCPLD_LED_PLATFORM_DEFAULT;
+}
+
+static void mlxcpld_led_bus_access_func(u16 base, u8 offset, u8 rw_flag,
+ u8 *data)
+{
+ u32 addr = base + offset;
+
+ if (rw_flag == 0)
+ outb(*data, addr);
+ else
+ *data = inb(addr);
+}
+
+static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset)
+{
+ u8 nib, val;
+
+ /*
+ * Each LED is controlled through low or high nibble of the relevant
+ * CPLD register. Register offset is specified by off parameter.
+ * Parameter vset provides color code: 0x0 for off, 0x5 for solid red,
+ * 0x6 for 3Hz blink red, 0xd for solid green, 0xe for 3Hz blink
+ * green.
+ * Parameter mask specifies which nibble is used for specific LED: mask
+ * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f -
+ * higher nibble (bits from 4 to 7).
+ */
+ spin_lock(&mlxcpld_led->lock);
+ mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 1,
+ &val);
+ nib = (mask == 0xf0) ? vset : (vset << 4);
+ val = (val & mask) | nib;
+ mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 0,
+ &val);
+ spin_unlock(&mlxcpld_led->lock);
+}
+
+static void mlxcpld_led_brightness_set(struct led_classdev *led,
+ enum led_brightness value)
+{
+ struct mlxcpld_led_priv *pled = cdev_to_priv(led);
+
+ if (value) {
+ mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
+ pled->param.base_color);
+ return;
+ }
+
+ mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
+ MLXCPLD_LED_IS_OFF);
+}
+
+static int mlxcpld_led_blink_set(struct led_classdev *led,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct mlxcpld_led_priv *pled = cdev_to_priv(led);
+
+ /*
+ * HW supports two types of blinking: full (6Hz) and half (3Hz).
+ * For delay on/off zero default setting 3Hz is used.
+ */
+ if (!(*delay_on == 0 && *delay_off == 0) &&
+ !(*delay_on == MLXCPLD_LED_BLINK_3HZ &&
+ *delay_off == MLXCPLD_LED_BLINK_3HZ) &&
+ !(*delay_on == MLXCPLD_LED_BLINK_6HZ &&
+ *delay_off == MLXCPLD_LED_BLINK_6HZ))
+ return -EINVAL;
+
+ if (*delay_on == MLXCPLD_LED_BLINK_6HZ)
+ mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
+ pled->param.base_color +
+ MLXCPLD_LED_OFFSET_FULL);
+ else
+ mlxcpld_led_store_hw(pled->param.mask, pled->param.offset,
+ pled->param.base_color +
+ MLXCPLD_LED_OFFSET_HALF);
+
+ return 0;
+}
+
+static int mlxcpld_led_config(struct device *dev,
+ struct mlxcpld_led_pdata *cpld)
+{
+ int i;
+ int err;
+
+ cpld->pled = devm_kzalloc(dev, sizeof(struct mlxcpld_led_priv) *
+ cpld->num_led_instances, GFP_KERNEL);
+ if (!cpld->pled)
+ return -ENOMEM;
+
+ for (i = 0; i < cpld->num_led_instances; i++) {
+ cpld->pled[i].cdev.name = cpld->profile[i].name;
+ cpld->pled[i].cdev.brightness = cpld->profile[i].brightness;
+ cpld->pled[i].cdev.max_brightness = 1;
+ cpld->pled[i].cdev.brightness_set = mlxcpld_led_brightness_set;
+ cpld->pled[i].cdev.blink_set = mlxcpld_led_blink_set;
+ cpld->pled[i].cdev.flags = LED_CORE_SUSPENDRESUME;
+ err = devm_led_classdev_register(dev, &cpld->pled[i].cdev);
+ if (err)
+ return err;
+
+ cpld->pled[i].param.offset = mlxcpld_led->profile[i].offset;
+ cpld->pled[i].param.mask = mlxcpld_led->profile[i].mask;
+ cpld->pled[i].param.base_color =
+ mlxcpld_led->profile[i].base_color;
+
+ if (mlxcpld_led->profile[i].brightness)
+ mlxcpld_led_brightness_set(&cpld->pled[i].cdev,
+ mlxcpld_led->profile[i].brightness);
+ }
+
+ return 0;
+}
+
+static int __init mlxcpld_led_probe(struct platform_device *pdev)
+{
+ enum mlxcpld_led_platform_types mlxcpld_led_plat =
+ mlxcpld_led_platform_check_sys_type();
+
+ mlxcpld_led = devm_kzalloc(&pdev->dev, sizeof(*mlxcpld_led),
+ GFP_KERNEL);
+ if (!mlxcpld_led)
+ return -ENOMEM;
+
+ mlxcpld_led->pdev = pdev;
+
+ switch (mlxcpld_led_plat) {
+ case MLXCPLD_LED_PLATFORM_MSN2100:
+ mlxcpld_led->profile = mlxcpld_led_msn2100_profile;
+ mlxcpld_led->num_led_instances =
+ ARRAY_SIZE(mlxcpld_led_msn2100_profile);
+ break;
+
+ default:
+ mlxcpld_led->profile = mlxcpld_led_default_profile;
+ mlxcpld_led->num_led_instances =
+ ARRAY_SIZE(mlxcpld_led_default_profile);
+ break;
+ }
+
+ spin_lock_init(&mlxcpld_led->lock);
+
+ return mlxcpld_led_config(&pdev->dev, mlxcpld_led);
+}
+
+static struct platform_driver mlxcpld_led_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+};
+
+static int __init mlxcpld_led_init(void)
+{
+ struct platform_device *pdev;
+ int err;
+
+ pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0);
+ if (IS_ERR(pdev)) {
+ pr_err("Device allocation failed\n");
+ return PTR_ERR(pdev);
+ }
+
+ err = platform_driver_probe(&mlxcpld_led_driver, mlxcpld_led_probe);
+ if (err) {
+ pr_err("Probe platform driver failed\n");
+ platform_device_unregister(pdev);
+ }
+
+ return err;
+}
+
+static void __exit mlxcpld_led_exit(void)
+{
+ platform_device_unregister(mlxcpld_led->pdev);
+ platform_driver_unregister(&mlxcpld_led_driver);
+}
+
+module_init(mlxcpld_led_init);
+module_exit(mlxcpld_led_exit);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
+MODULE_DESCRIPTION("Mellanox board LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:leds_mlxcpld");
projects / cascardo / linux.git / commitdiff