executed in user mode, or executed in the idle loop, we can
safely free up that item.
- Preemptible variants of RCU (CONFIG_TREE_PREEMPT_RCU) get the
+ Preemptible variants of RCU (CONFIG_PREEMPT_RCU) get the
same effect, but require that the readers manipulate CPU-local
counters. These counters allow limited types of blocking within
RCU read-side critical sections. SRCU also uses CPU-local
o I hear that RCU needs work in order to support realtime kernels?
This work is largely completed. Realtime-friendly RCU can be
- enabled via the CONFIG_TREE_PREEMPT_RCU kernel configuration
+ enabled via the CONFIG_PREEMPT_RCU kernel configuration
parameter. However, work is in progress for enabling priority
boosting of preempted RCU read-side critical sections. This is
needed if you have CPU-bound realtime threads.
Stall-warning messages may be enabled and disabled completely via
/sys/module/rcupdate/parameters/rcu_cpu_stall_suppress.
-CONFIG_RCU_CPU_STALL_VERBOSE
-
- This kernel configuration parameter causes the stall warning to
- also dump the stacks of any tasks that are blocking the current
- RCU-preempt grace period.
-
CONFIG_RCU_CPU_STALL_INFO
This kernel configuration parameter causes the stall warning to
and that the stall was affecting RCU-sched. This message will normally be
followed by a stack dump of the offending CPU. On TREE_RCU kernel builds,
RCU and RCU-sched are implemented by the same underlying mechanism,
-while on TREE_PREEMPT_RCU kernel builds, RCU is instead implemented
+while on PREEMPT_RCU kernel builds, RCU is instead implemented
by rcu_preempt_state.
On the other hand, if the offending CPU fails to print out a stall-warning
This message indicates that CPU 2 detected that CPUs 3 and 5 were both
causing stalls, and that the stall was affecting RCU-bh. This message
will normally be followed by stack dumps for each CPU. Please note that
-TREE_PREEMPT_RCU builds can be stalled by tasks as well as by CPUs,
+PREEMPT_RCU builds can be stalled by tasks as well as by CPUs,
and that the tasks will be indicated by PID, for example, "P3421".
It is even possible for a rcu_preempt_state stall to be caused by both
CPUs -and- tasks, in which case the offending CPUs and tasks will all
o A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that
is running at a higher priority than the RCU softirq threads.
This will prevent RCU callbacks from ever being invoked,
- and in a CONFIG_TREE_PREEMPT_RCU kernel will further prevent
+ and in a CONFIG_PREEMPT_RCU kernel will further prevent
RCU grace periods from ever completing. Either way, the
system will eventually run out of memory and hang. In the
- CONFIG_TREE_PREEMPT_RCU case, you might see stall-warning
+ CONFIG_PREEMPT_RCU case, you might see stall-warning
messages.
o A hardware or software issue shuts off the scheduler-clock
for rcutree and next for rcutiny.
-CONFIG_TREE_RCU and CONFIG_TREE_PREEMPT_RCU debugfs Files and Formats
+CONFIG_TREE_RCU and CONFIG_PREEMPT_RCU debugfs Files and Formats
These implementations of RCU provide several debugfs directories under the
top-level directory "rcu":
rcu/rcu_sched
Each directory contains files for the corresponding flavor of RCU.
-Note that rcu/rcu_preempt is only present for CONFIG_TREE_PREEMPT_RCU.
+Note that rcu/rcu_preempt is only present for CONFIG_PREEMPT_RCU.
For CONFIG_TREE_RCU, the RCU flavor maps onto the RCU-sched flavor,
so that activity for both appears in rcu/rcu_sched.
Used by a reader to inform the reclaimer that the reader is
entering an RCU read-side critical section. It is illegal
to block while in an RCU read-side critical section, though
- kernels built with CONFIG_TREE_PREEMPT_RCU can preempt RCU
+ kernels built with CONFIG_PREEMPT_RCU can preempt RCU
read-side critical sections. Any RCU-protected data structure
accessed during an RCU read-side critical section is guaranteed to
remain unreclaimed for the full duration of that critical section.
maintainers on how to implement atomic counter, bitops, and spinlock
interfaces properly.
- The atomic_t type should be defined as a signed integer.
-Also, it should be made opaque such that any kind of cast to a normal
-C integer type will fail. Something like the following should
-suffice:
+ The atomic_t type should be defined as a signed integer and
+the atomic_long_t type as a signed long integer. Also, they should
+be made opaque such that any kind of cast to a normal C integer type
+will fail. Something like the following should suffice:
typedef struct { int counter; } atomic_t;
+ typedef struct { long counter; } atomic_long_t;
Historically, counter has been declared volatile. This is now discouraged.
See Documentation/volatile-considered-harmful.txt for the complete rationale.
proper implicit or explicit read memory barrier is needed before reading the
value with atomic_read from another thread.
+As with all of the atomic_ interfaces, replace the leading "atomic_"
+with "atomic_long_" to operate on atomic_long_t.
+
The second interface can be used at runtime, as in:
struct foo { atomic_t counter; };
quiescent states. Units are jiffies, minimum
value is one, and maximum value is HZ.
+ rcutree.kthread_prio= [KNL,BOOT]
+ Set the SCHED_FIFO priority of the RCU
+ per-CPU kthreads (rcuc/N). This value is also
+ used for the priority of the RCU boost threads
+ (rcub/N). Valid values are 1-99 and the default
+ is 1 (the least-favored priority).
+
rcutree.rcu_nocb_leader_stride= [KNL]
Set the number of NOCB kthread groups, which
defaults to the square root of the number of
messages. Disable with a value less than or equal
to zero.
+ rcupdate.rcu_self_test= [KNL]
+ Run the RCU early boot self tests
+
+ rcupdate.rcu_self_test_bh= [KNL]
+ Run the RCU bh early boot self tests
+
+ rcupdate.rcu_self_test_sched= [KNL]
+ Run the RCU sched early boot self tests
+
rdinit= [KNL]
Format: <full_path>
Run specified binary instead of /init from the ramdisk,
The set of accesses as seen by the memory system in the middle can be arranged
in 24 different combinations:
- STORE A=3, STORE B=4, x=LOAD A->3, y=LOAD B->4
- STORE A=3, STORE B=4, y=LOAD B->4, x=LOAD A->3
- STORE A=3, x=LOAD A->3, STORE B=4, y=LOAD B->4
- STORE A=3, x=LOAD A->3, y=LOAD B->2, STORE B=4
- STORE A=3, y=LOAD B->2, STORE B=4, x=LOAD A->3
- STORE A=3, y=LOAD B->2, x=LOAD A->3, STORE B=4
- STORE B=4, STORE A=3, x=LOAD A->3, y=LOAD B->4
+ STORE A=3, STORE B=4, y=LOAD A->3, x=LOAD B->4
+ STORE A=3, STORE B=4, x=LOAD B->4, y=LOAD A->3
+ STORE A=3, y=LOAD A->3, STORE B=4, x=LOAD B->4
+ STORE A=3, y=LOAD A->3, x=LOAD B->2, STORE B=4
+ STORE A=3, x=LOAD B->2, STORE B=4, y=LOAD A->3
+ STORE A=3, x=LOAD B->2, y=LOAD A->3, STORE B=4
+ STORE B=4, STORE A=3, y=LOAD A->3, x=LOAD B->4
STORE B=4, ...
...
and can thus result in four different combinations of values:
- x == 1, y == 2
- x == 1, y == 4
- x == 3, y == 2
- x == 3, y == 4
+ x == 2, y == 1
+ x == 2, y == 3
+ x == 4, y == 1
+ x == 4, y == 3
Furthermore, the stores committed by a CPU to the memory system may not be
identical, as noted earlier, the compiler could pull this store outside
of the 'if' statement.
+You must also be careful not to rely too much on boolean short-circuit
+evaluation. Consider this example:
+
+ q = ACCESS_ONCE(a);
+ if (a || 1 > 0)
+ ACCESS_ONCE(b) = 1;
+
+Because the second condition is always true, the compiler can transform
+this example as following, defeating control dependency:
+
+ q = ACCESS_ONCE(a);
+ ACCESS_ONCE(b) = 1;
+
+This example underscores the need to ensure that the compiler cannot
+out-guess your code. More generally, although ACCESS_ONCE() does force
+the compiler to actually emit code for a given load, it does not force
+the compiler to use the results.
+
Finally, control dependencies do -not- provide transitivity. This is
demonstrated by two related examples, with the initial values of
x and y both being zero:
#define INIT_IDS
#endif
-#ifdef CONFIG_TREE_PREEMPT_RCU
+#ifdef CONFIG_PREEMPT_RCU
#define INIT_TASK_RCU_TREE_PREEMPT() \
.rcu_blocked_node = NULL,
#else
INVALID_RCU_FLAVOR
};
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU)
void rcutorture_get_gp_data(enum rcutorture_type test_type, int *flags,
unsigned long *gpnum, unsigned long *completed);
void rcutorture_record_test_transition(void);
void rcu_init(void);
void rcu_sched_qs(void);
void rcu_bh_qs(void);
-void rcu_check_callbacks(int cpu, int user);
+void rcu_check_callbacks(int user);
struct notifier_block;
void rcu_idle_enter(void);
void rcu_idle_exit(void);
*/
#define cond_resched_rcu_qs() \
do { \
- rcu_note_voluntary_context_switch(current); \
- cond_resched(); \
+ if (!cond_resched()) \
+ rcu_note_voluntary_context_switch(current); \
} while (0)
#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) || defined(CONFIG_SMP)
void (*func)(struct rcu_head *head));
void wait_rcu_gp(call_rcu_func_t crf);
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU)
#include <linux/rcutree.h>
#elif defined(CONFIG_TINY_RCU)
#include <linux/rcutiny.h>
*
* In non-preemptible RCU implementations (TREE_RCU and TINY_RCU),
* it is illegal to block while in an RCU read-side critical section.
- * In preemptible RCU implementations (TREE_PREEMPT_RCU) in CONFIG_PREEMPT
+ * In preemptible RCU implementations (PREEMPT_RCU) in CONFIG_PREEMPT
* kernel builds, RCU read-side critical sections may be preempted,
* but explicit blocking is illegal. Finally, in preemptible RCU
* implementations in real-time (with -rt patchset) kernel builds, RCU
* Unfortunately, this function acquires the scheduler's runqueue and
* priority-inheritance spinlocks. This means that deadlock could result
* if the caller of rcu_read_unlock() already holds one of these locks or
- * any lock that is ever acquired while holding them.
+ * any lock that is ever acquired while holding them; or any lock which
+ * can be taken from interrupt context because rcu_boost()->rt_mutex_lock()
+ * does not disable irqs while taking ->wait_lock.
*
* That said, RCU readers are never priority boosted unless they were
* preempted. Therefore, one way to avoid deadlock is to make sure
*/
#define RCU_INIT_POINTER(p, v) \
do { \
+ rcu_dereference_sparse(p, __rcu); \
p = RCU_INITIALIZER(v); \
} while (0)
__kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head))
#if defined(CONFIG_TINY_RCU) || defined(CONFIG_RCU_NOCB_CPU_ALL)
-static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
+static inline int rcu_needs_cpu(unsigned long *delta_jiffies)
{
*delta_jiffies = ULONG_MAX;
return 0;
call_rcu(head, func);
}
-static inline void rcu_note_context_switch(int cpu)
+static inline void rcu_note_context_switch(void)
{
rcu_sched_qs();
}
#ifndef __LINUX_RCUTREE_H
#define __LINUX_RCUTREE_H
-void rcu_note_context_switch(int cpu);
+void rcu_note_context_switch(void);
#ifndef CONFIG_RCU_NOCB_CPU_ALL
-int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies);
+int rcu_needs_cpu(unsigned long *delta_jiffies);
#endif /* #ifndef CONFIG_RCU_NOCB_CPU_ALL */
void rcu_cpu_stall_reset(void);
*/
static inline void rcu_virt_note_context_switch(int cpu)
{
- rcu_note_context_switch(cpu);
+ rcu_note_context_switch();
}
void synchronize_rcu_bh(void);
union rcu_special rcu_read_unlock_special;
struct list_head rcu_node_entry;
#endif /* #ifdef CONFIG_PREEMPT_RCU */
-#ifdef CONFIG_TREE_PREEMPT_RCU
+#ifdef CONFIG_PREEMPT_RCU
struct rcu_node *rcu_blocked_node;
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+#endif /* #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_TASKS_RCU
unsigned long rcu_tasks_nvcsw;
bool rcu_tasks_holdout;
#ifdef CONFIG_RCU_TRACE
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU)
/*
* Tracepoint for grace-period events. Takes a string identifying the
__entry->cpu, __entry->qsevent)
);
-#endif /* #if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) */
+#endif /* #if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU) */
/*
* Tracepoint for dyntick-idle entry/exit events. These take a string
thousands of CPUs. It also scales down nicely to
smaller systems.
-config TREE_PREEMPT_RCU
+config PREEMPT_RCU
bool "Preemptible tree-based hierarchical RCU"
depends on PREEMPT
select IRQ_WORK
endchoice
-config PREEMPT_RCU
- def_bool TREE_PREEMPT_RCU
- help
- This option enables preemptible-RCU code that is common between
- TREE_PREEMPT_RCU and, in the old days, TINY_PREEMPT_RCU.
-
config TASKS_RCU
bool "Task_based RCU implementation using voluntary context switch"
default n
If unsure, say N.
config RCU_STALL_COMMON
- def_bool ( TREE_RCU || TREE_PREEMPT_RCU || RCU_TRACE )
+ def_bool ( TREE_RCU || PREEMPT_RCU || RCU_TRACE )
help
This option enables RCU CPU stall code that is common between
the TINY and TREE variants of RCU. The purpose is to allow
int "Tree-based hierarchical RCU fanout value"
range 2 64 if 64BIT
range 2 32 if !64BIT
- depends on TREE_RCU || TREE_PREEMPT_RCU
+ depends on TREE_RCU || PREEMPT_RCU
default 64 if 64BIT
default 32 if !64BIT
help
int "Tree-based hierarchical RCU leaf-level fanout value"
range 2 RCU_FANOUT if 64BIT
range 2 RCU_FANOUT if !64BIT
- depends on TREE_RCU || TREE_PREEMPT_RCU
+ depends on TREE_RCU || PREEMPT_RCU
default 16
help
This option controls the leaf-level fanout of hierarchical
config RCU_FANOUT_EXACT
bool "Disable tree-based hierarchical RCU auto-balancing"
- depends on TREE_RCU || TREE_PREEMPT_RCU
+ depends on TREE_RCU || PREEMPT_RCU
default n
help
This option forces use of the exact RCU_FANOUT value specified,
Say N if you are unsure.
config TREE_RCU_TRACE
- def_bool RCU_TRACE && ( TREE_RCU || TREE_PREEMPT_RCU )
+ def_bool RCU_TRACE && ( TREE_RCU || PREEMPT_RCU )
select DEBUG_FS
help
This option provides tracing for the TREE_RCU and
- TREE_PREEMPT_RCU implementations, permitting Makefile to
+ PREEMPT_RCU implementations, permitting Makefile to
trivially select kernel/rcutree_trace.c.
config RCU_BOOST
Say Y here if you are working with real-time apps or heavy loads
Say N here if you are unsure.
-config RCU_BOOST_PRIO
- int "Real-time priority to boost RCU readers to"
+config RCU_KTHREAD_PRIO
+ int "Real-time priority to use for RCU worker threads"
range 1 99
depends on RCU_BOOST
default 1
help
- This option specifies the real-time priority to which long-term
- preempted RCU readers are to be boosted. If you are working
- with a real-time application that has one or more CPU-bound
- threads running at a real-time priority level, you should set
- RCU_BOOST_PRIO to a priority higher then the highest-priority
- real-time CPU-bound thread. The default RCU_BOOST_PRIO value
- of 1 is appropriate in the common case, which is real-time
+ This option specifies the SCHED_FIFO priority value that will be
+ assigned to the rcuc/n and rcub/n threads and is also the value
+ used for RCU_BOOST (if enabled). If you are working with a
+ real-time application that has one or more CPU-bound threads
+ running at a real-time priority level, you should set
+ RCU_KTHREAD_PRIO to a priority higher than the highest-priority
+ real-time CPU-bound application thread. The default RCU_KTHREAD_PRIO
+ value of 1 is appropriate in the common case, which is real-time
applications that do not have any CPU-bound threads.
Some real-time applications might not have a single real-time
thread that saturates a given CPU, but instead might have
multiple real-time threads that, taken together, fully utilize
- that CPU. In this case, you should set RCU_BOOST_PRIO to
+ that CPU. In this case, you should set RCU_KTHREAD_PRIO to
a priority higher than the lowest-priority thread that is
conspiring to prevent the CPU from running any non-real-time
tasks. For example, if one thread at priority 10 and another
thread at priority 5 are between themselves fully consuming
- the CPU time on a given CPU, then RCU_BOOST_PRIO should be
+ the CPU time on a given CPU, then RCU_KTHREAD_PRIO should be
set to priority 6 or higher.
Specify the real-time priority, or take the default if unsure.
config RCU_NOCB_CPU
bool "Offload RCU callback processing from boot-selected CPUs"
- depends on TREE_RCU || TREE_PREEMPT_RCU
+ depends on TREE_RCU || PREEMPT_RCU
default n
help
Use this option to reduce OS jitter for aggressive HPC or
choice
prompt "Build-forced no-CBs CPUs"
default RCU_NOCB_CPU_NONE
+ depends on RCU_NOCB_CPU
help
This option allows no-CBs CPUs (whose RCU callbacks are invoked
from kthreads rather than from softirq context) to be specified
config RCU_NOCB_CPU_NONE
bool "No build_forced no-CBs CPUs"
- depends on RCU_NOCB_CPU
help
This option does not force any of the CPUs to be no-CBs CPUs.
Only CPUs designated by the rcu_nocbs= boot parameter will be
config RCU_NOCB_CPU_ZERO
bool "CPU 0 is a build_forced no-CBs CPU"
- depends on RCU_NOCB_CPU
help
This option forces CPU 0 to be a no-CBs CPU, so that its RCU
callbacks are invoked by a per-CPU kthread whose name begins
config RCU_NOCB_CPU_ALL
bool "All CPUs are build_forced no-CBs CPUs"
- depends on RCU_NOCB_CPU
help
This option forces all CPUs to be no-CBs CPUs. The rcu_nocbs=
boot parameter will be ignored. All CPUs' RCU callbacks will
#define cpuhp_lock_acquire() lock_map_acquire(&cpu_hotplug.dep_map)
#define cpuhp_lock_release() lock_map_release(&cpu_hotplug.dep_map)
+static void apply_puts_pending(int max)
+{
+ int delta;
+
+ if (atomic_read(&cpu_hotplug.puts_pending) >= max) {
+ delta = atomic_xchg(&cpu_hotplug.puts_pending, 0);
+ cpu_hotplug.refcount -= delta;
+ }
+}
+
void get_online_cpus(void)
{
might_sleep();
return;
cpuhp_lock_acquire_read();
mutex_lock(&cpu_hotplug.lock);
+ apply_puts_pending(65536);
cpu_hotplug.refcount++;
mutex_unlock(&cpu_hotplug.lock);
}
if (!mutex_trylock(&cpu_hotplug.lock))
return false;
cpuhp_lock_acquire_tryread();
+ apply_puts_pending(65536);
cpu_hotplug.refcount++;
mutex_unlock(&cpu_hotplug.lock);
return true;
cpuhp_lock_acquire();
for (;;) {
mutex_lock(&cpu_hotplug.lock);
- if (atomic_read(&cpu_hotplug.puts_pending)) {
- int delta;
-
- delta = atomic_xchg(&cpu_hotplug.puts_pending, 0);
- cpu_hotplug.refcount -= delta;
- }
+ apply_puts_pending(1);
if (likely(!cpu_hotplug.refcount))
break;
__set_current_state(TASK_UNINTERRUPTIBLE);
{
if (atomic_dec_and_test(&sighand->count)) {
signalfd_cleanup(sighand);
+ /*
+ * sighand_cachep is SLAB_DESTROY_BY_RCU so we can free it
+ * without an RCU grace period, see __lock_task_sighand().
+ */
kmem_cache_free(sighand_cachep, sighand);
}
}
-
/*
* Initialize POSIX timer handling for a thread group.
*/
obj-y += update.o srcu.o
obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
obj-$(CONFIG_TREE_RCU) += tree.o
-obj-$(CONFIG_TREE_PREEMPT_RCU) += tree.o
+obj-$(CONFIG_PREEMPT_RCU) += tree.o
obj-$(CONFIG_TREE_RCU_TRACE) += tree_trace.o
obj-$(CONFIG_TINY_RCU) += tiny.o
*/
#define TPS(x) tracepoint_string(x)
+void rcu_early_boot_tests(void);
+
#endif /* __LINUX_RCU_H */
cur_ops->cb_barrier();
stutter_wait("rcu_torture_cbflood");
} while (!torture_must_stop());
+ vfree(rhp);
torture_kthread_stopping("rcu_torture_cbflood");
return 0;
}
* be called from hardirq context. It is normally called from the
* scheduling-clock interrupt.
*/
-void rcu_check_callbacks(int cpu, int user)
+void rcu_check_callbacks(int user)
{
RCU_TRACE(check_cpu_stalls());
if (user || rcu_is_cpu_rrupt_from_idle())
}
EXPORT_SYMBOL_GPL(call_rcu_bh);
-void rcu_init(void)
+void __init rcu_init(void)
{
open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
+
+ rcu_early_boot_tests();
}
.name = RCU_STATE_NAME(sname), \
.abbr = sabbr, \
}; \
-DEFINE_PER_CPU(struct rcu_data, sname##_data)
+DEFINE_PER_CPU_SHARED_ALIGNED(struct rcu_data, sname##_data)
RCU_STATE_INITIALIZER(rcu_sched, 's', call_rcu_sched);
RCU_STATE_INITIALIZER(rcu_bh, 'b', call_rcu_bh);
*/
static int rcu_scheduler_fully_active __read_mostly;
-#ifdef CONFIG_RCU_BOOST
-
-/*
- * Control variables for per-CPU and per-rcu_node kthreads. These
- * handle all flavors of RCU.
- */
-static DEFINE_PER_CPU(struct task_struct *, rcu_cpu_kthread_task);
-DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
-DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
-DEFINE_PER_CPU(char, rcu_cpu_has_work);
-
-#endif /* #ifdef CONFIG_RCU_BOOST */
-
static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu);
static void invoke_rcu_core(void);
static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp);
* and requires special handling for preemptible RCU.
* The caller must have disabled preemption.
*/
-void rcu_note_context_switch(int cpu)
+void rcu_note_context_switch(void)
{
trace_rcu_utilization(TPS("Start context switch"));
rcu_sched_qs();
- rcu_preempt_note_context_switch(cpu);
+ rcu_preempt_note_context_switch();
if (unlikely(raw_cpu_read(rcu_sched_qs_mask)))
rcu_momentary_dyntick_idle();
trace_rcu_utilization(TPS("End context switch"));
unsigned long *maxj),
bool *isidle, unsigned long *maxj);
static void force_quiescent_state(struct rcu_state *rsp);
-static int rcu_pending(int cpu);
+static int rcu_pending(void);
/*
* Return the number of RCU-sched batches processed thus far for debug & stats.
* we really have entered idle, and must do the appropriate accounting.
* The caller must have disabled interrupts.
*/
-static void rcu_eqs_enter_common(struct rcu_dynticks *rdtp, long long oldval,
- bool user)
+static void rcu_eqs_enter_common(long long oldval, bool user)
{
struct rcu_state *rsp;
struct rcu_data *rdp;
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
trace_rcu_dyntick(TPS("Start"), oldval, rdtp->dynticks_nesting);
if (!user && !is_idle_task(current)) {
rdp = this_cpu_ptr(rsp->rda);
do_nocb_deferred_wakeup(rdp);
}
- rcu_prepare_for_idle(smp_processor_id());
+ rcu_prepare_for_idle();
/* CPUs seeing atomic_inc() must see prior RCU read-side crit sects */
smp_mb__before_atomic(); /* See above. */
atomic_inc(&rdtp->dynticks);
WARN_ON_ONCE((oldval & DYNTICK_TASK_NEST_MASK) == 0);
if ((oldval & DYNTICK_TASK_NEST_MASK) == DYNTICK_TASK_NEST_VALUE) {
rdtp->dynticks_nesting = 0;
- rcu_eqs_enter_common(rdtp, oldval, user);
+ rcu_eqs_enter_common(oldval, user);
} else {
rdtp->dynticks_nesting -= DYNTICK_TASK_NEST_VALUE;
}
local_irq_save(flags);
rcu_eqs_enter(false);
- rcu_sysidle_enter(this_cpu_ptr(&rcu_dynticks), 0);
+ rcu_sysidle_enter(0);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(rcu_idle_enter);
if (rdtp->dynticks_nesting)
trace_rcu_dyntick(TPS("--="), oldval, rdtp->dynticks_nesting);
else
- rcu_eqs_enter_common(rdtp, oldval, true);
- rcu_sysidle_enter(rdtp, 1);
+ rcu_eqs_enter_common(oldval, true);
+ rcu_sysidle_enter(1);
local_irq_restore(flags);
}
* we really have exited idle, and must do the appropriate accounting.
* The caller must have disabled interrupts.
*/
-static void rcu_eqs_exit_common(struct rcu_dynticks *rdtp, long long oldval,
- int user)
+static void rcu_eqs_exit_common(long long oldval, int user)
{
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
+
rcu_dynticks_task_exit();
smp_mb__before_atomic(); /* Force ordering w/previous sojourn. */
atomic_inc(&rdtp->dynticks);
/* CPUs seeing atomic_inc() must see later RCU read-side crit sects */
smp_mb__after_atomic(); /* See above. */
WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1));
- rcu_cleanup_after_idle(smp_processor_id());
+ rcu_cleanup_after_idle();
trace_rcu_dyntick(TPS("End"), oldval, rdtp->dynticks_nesting);
if (!user && !is_idle_task(current)) {
struct task_struct *idle __maybe_unused =
rdtp->dynticks_nesting += DYNTICK_TASK_NEST_VALUE;
} else {
rdtp->dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
- rcu_eqs_exit_common(rdtp, oldval, user);
+ rcu_eqs_exit_common(oldval, user);
}
}
local_irq_save(flags);
rcu_eqs_exit(false);
- rcu_sysidle_exit(this_cpu_ptr(&rcu_dynticks), 0);
+ rcu_sysidle_exit(0);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(rcu_idle_exit);
if (oldval)
trace_rcu_dyntick(TPS("++="), oldval, rdtp->dynticks_nesting);
else
- rcu_eqs_exit_common(rdtp, oldval, true);
- rcu_sysidle_exit(rdtp, 1);
+ rcu_eqs_exit_common(oldval, true);
+ rcu_sysidle_exit(1);
local_irq_restore(flags);
}
* invoked from the scheduling-clock interrupt. If rcu_pending returns
* false, there is no point in invoking rcu_check_callbacks().
*/
-void rcu_check_callbacks(int cpu, int user)
+void rcu_check_callbacks(int user)
{
trace_rcu_utilization(TPS("Start scheduler-tick"));
increment_cpu_stall_ticks();
rcu_bh_qs();
}
- rcu_preempt_check_callbacks(cpu);
- if (rcu_pending(cpu))
+ rcu_preempt_check_callbacks();
+ if (rcu_pending())
invoke_rcu_core();
if (user)
rcu_note_voluntary_context_switch(current);
*/
void synchronize_sched_expedited(void)
{
+ cpumask_var_t cm;
+ bool cma = false;
+ int cpu;
long firstsnap, s, snap;
int trycount = 0;
struct rcu_state *rsp = &rcu_sched_state;
}
WARN_ON_ONCE(cpu_is_offline(raw_smp_processor_id()));
+ /* Offline CPUs, idle CPUs, and any CPU we run on are quiescent. */
+ cma = zalloc_cpumask_var(&cm, GFP_KERNEL);
+ if (cma) {
+ cpumask_copy(cm, cpu_online_mask);
+ cpumask_clear_cpu(raw_smp_processor_id(), cm);
+ for_each_cpu(cpu, cm) {
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+ if (!(atomic_add_return(0, &rdtp->dynticks) & 0x1))
+ cpumask_clear_cpu(cpu, cm);
+ }
+ if (cpumask_weight(cm) == 0)
+ goto all_cpus_idle;
+ }
+
/*
* Each pass through the following loop attempts to force a
* context switch on each CPU.
*/
- while (try_stop_cpus(cpu_online_mask,
+ while (try_stop_cpus(cma ? cm : cpu_online_mask,
synchronize_sched_expedited_cpu_stop,
NULL) == -EAGAIN) {
put_online_cpus();
/* ensure test happens before caller kfree */
smp_mb__before_atomic(); /* ^^^ */
atomic_long_inc(&rsp->expedited_workdone1);
+ free_cpumask_var(cm);
return;
}
} else {
wait_rcu_gp(call_rcu_sched);
atomic_long_inc(&rsp->expedited_normal);
+ free_cpumask_var(cm);
return;
}
/* ensure test happens before caller kfree */
smp_mb__before_atomic(); /* ^^^ */
atomic_long_inc(&rsp->expedited_workdone2);
+ free_cpumask_var(cm);
return;
}
/* CPU hotplug operation in flight, use normal GP. */
wait_rcu_gp(call_rcu_sched);
atomic_long_inc(&rsp->expedited_normal);
+ free_cpumask_var(cm);
return;
}
snap = atomic_long_read(&rsp->expedited_start);
}
atomic_long_inc(&rsp->expedited_stoppedcpus);
+all_cpus_idle:
+ free_cpumask_var(cm);
+
/*
* Everyone up to our most recent fetch is covered by our grace
* period. Update the counter, but only if our work is still
* by the current CPU, returning 1 if so. This function is part of the
* RCU implementation; it is -not- an exported member of the RCU API.
*/
-static int rcu_pending(int cpu)
+static int rcu_pending(void)
{
struct rcu_state *rsp;
for_each_rcu_flavor(rsp)
- if (__rcu_pending(rsp, per_cpu_ptr(rsp->rda, cpu)))
+ if (__rcu_pending(rsp, this_cpu_ptr(rsp->rda)))
return 1;
return 0;
}
* non-NULL, store an indication of whether all callbacks are lazy.
* (If there are no callbacks, all of them are deemed to be lazy.)
*/
-static int __maybe_unused rcu_cpu_has_callbacks(int cpu, bool *all_lazy)
+static int __maybe_unused rcu_cpu_has_callbacks(bool *all_lazy)
{
bool al = true;
bool hc = false;
struct rcu_state *rsp;
for_each_rcu_flavor(rsp) {
- rdp = per_cpu_ptr(rsp->rda, cpu);
+ rdp = this_cpu_ptr(rsp->rda);
if (!rdp->nxtlist)
continue;
hc = true;
case CPU_DEAD_FROZEN:
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
- for_each_rcu_flavor(rsp)
+ for_each_rcu_flavor(rsp) {
rcu_cleanup_dead_cpu(cpu, rsp);
+ do_nocb_deferred_wakeup(per_cpu_ptr(rsp->rda, cpu));
+ }
break;
default:
break;
pm_notifier(rcu_pm_notify, 0);
for_each_online_cpu(cpu)
rcu_cpu_notify(NULL, CPU_UP_PREPARE, (void *)(long)cpu);
+
+ rcu_early_boot_tests();
}
#include "tree_plugin.h"
unsigned long expmask; /* Groups that have ->blkd_tasks */
/* elements that need to drain to allow the */
/* current expedited grace period to */
- /* complete (only for TREE_PREEMPT_RCU). */
+ /* complete (only for PREEMPT_RCU). */
unsigned long qsmaskinit;
/* Per-GP initial value for qsmask & expmask. */
unsigned long grpmask; /* Mask to apply to parent qsmask. */
extern struct rcu_state rcu_bh_state;
DECLARE_PER_CPU(struct rcu_data, rcu_bh_data);
-#ifdef CONFIG_TREE_PREEMPT_RCU
+#ifdef CONFIG_PREEMPT_RCU
extern struct rcu_state rcu_preempt_state;
DECLARE_PER_CPU(struct rcu_data, rcu_preempt_data);
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+#endif /* #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_RCU_BOOST
DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
/* Forward declarations for rcutree_plugin.h */
static void rcu_bootup_announce(void);
long rcu_batches_completed(void);
-static void rcu_preempt_note_context_switch(int cpu);
+static void rcu_preempt_note_context_switch(void);
static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
struct rcu_node *rnp,
struct rcu_data *rdp);
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
-static void rcu_preempt_check_callbacks(int cpu);
+static void rcu_preempt_check_callbacks(void);
void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu));
-#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_TREE_PREEMPT_RCU)
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PREEMPT_RCU)
static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp,
bool wake);
-#endif /* #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_TREE_PREEMPT_RCU) */
+#endif /* #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PREEMPT_RCU) */
static void __init __rcu_init_preempt(void);
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags);
static void rcu_preempt_boost_start_gp(struct rcu_node *rnp);
#endif /* #ifdef CONFIG_RCU_BOOST */
static void __init rcu_spawn_boost_kthreads(void);
static void rcu_prepare_kthreads(int cpu);
-static void rcu_cleanup_after_idle(int cpu);
-static void rcu_prepare_for_idle(int cpu);
+static void rcu_cleanup_after_idle(void);
+static void rcu_prepare_for_idle(void);
static void rcu_idle_count_callbacks_posted(void);
static void print_cpu_stall_info_begin(void);
static void print_cpu_stall_info(struct rcu_state *rsp, int cpu);
#endif /* #ifdef CONFIG_RCU_NOCB_CPU */
static void __maybe_unused rcu_kick_nohz_cpu(int cpu);
static bool init_nocb_callback_list(struct rcu_data *rdp);
-static void rcu_sysidle_enter(struct rcu_dynticks *rdtp, int irq);
-static void rcu_sysidle_exit(struct rcu_dynticks *rdtp, int irq);
+static void rcu_sysidle_enter(int irq);
+static void rcu_sysidle_exit(int irq);
static void rcu_sysidle_check_cpu(struct rcu_data *rdp, bool *isidle,
unsigned long *maxj);
static bool is_sysidle_rcu_state(struct rcu_state *rsp);
#include <linux/smpboot.h>
#include "../time/tick-internal.h"
-#define RCU_KTHREAD_PRIO 1
-
#ifdef CONFIG_RCU_BOOST
+
#include "../locking/rtmutex_common.h"
-#define RCU_BOOST_PRIO CONFIG_RCU_BOOST_PRIO
-#else
-#define RCU_BOOST_PRIO RCU_KTHREAD_PRIO
-#endif
+
+/* rcuc/rcub kthread realtime priority */
+static int kthread_prio = CONFIG_RCU_KTHREAD_PRIO;
+module_param(kthread_prio, int, 0644);
+
+/*
+ * Control variables for per-CPU and per-rcu_node kthreads. These
+ * handle all flavors of RCU.
+ */
+static DEFINE_PER_CPU(struct task_struct *, rcu_cpu_kthread_task);
+DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
+DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
+DEFINE_PER_CPU(char, rcu_cpu_has_work);
+
+#endif /* #ifdef CONFIG_RCU_BOOST */
#ifdef CONFIG_RCU_NOCB_CPU
static cpumask_var_t rcu_nocb_mask; /* CPUs to have callbacks offloaded. */
#ifdef CONFIG_RCU_TORTURE_TEST_RUNNABLE
pr_info("\tRCU torture testing starts during boot.\n");
#endif
-#if defined(CONFIG_TREE_PREEMPT_RCU) && !defined(CONFIG_RCU_CPU_STALL_VERBOSE)
- pr_info("\tDump stacks of tasks blocking RCU-preempt GP.\n");
-#endif
#if defined(CONFIG_RCU_CPU_STALL_INFO)
pr_info("\tAdditional per-CPU info printed with stalls.\n");
#endif
pr_info("\tBoot-time adjustment of leaf fanout to %d.\n", rcu_fanout_leaf);
if (nr_cpu_ids != NR_CPUS)
pr_info("\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%d.\n", NR_CPUS, nr_cpu_ids);
+#ifdef CONFIG_RCU_BOOST
+ pr_info("\tRCU kthread priority: %d.\n", kthread_prio);
+#endif
}
-#ifdef CONFIG_TREE_PREEMPT_RCU
+#ifdef CONFIG_PREEMPT_RCU
RCU_STATE_INITIALIZER(rcu_preempt, 'p', call_rcu);
static struct rcu_state *rcu_state_p = &rcu_preempt_state;
*
* Caller must disable preemption.
*/
-static void rcu_preempt_note_context_switch(int cpu)
+static void rcu_preempt_note_context_switch(void)
{
struct task_struct *t = current;
unsigned long flags;
!t->rcu_read_unlock_special.b.blocked) {
/* Possibly blocking in an RCU read-side critical section. */
- rdp = per_cpu_ptr(rcu_preempt_state.rda, cpu);
+ rdp = this_cpu_ptr(rcu_preempt_state.rda);
rnp = rdp->mynode;
raw_spin_lock_irqsave(&rnp->lock, flags);
smp_mb__after_unlock_lock();
}
}
-#ifdef CONFIG_RCU_CPU_STALL_VERBOSE
-
/*
* Dump detailed information for all tasks blocking the current RCU
* grace period on the specified rcu_node structure.
rcu_print_detail_task_stall_rnp(rnp);
}
-#else /* #ifdef CONFIG_RCU_CPU_STALL_VERBOSE */
-
-static void rcu_print_detail_task_stall(struct rcu_state *rsp)
-{
-}
-
-#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_VERBOSE */
-
#ifdef CONFIG_RCU_CPU_STALL_INFO
static void rcu_print_task_stall_begin(struct rcu_node *rnp)
*
* Caller must disable hard irqs.
*/
-static void rcu_preempt_check_callbacks(int cpu)
+static void rcu_preempt_check_callbacks(void)
{
struct task_struct *t = current;
return;
}
if (t->rcu_read_lock_nesting > 0 &&
- per_cpu(rcu_preempt_data, cpu).qs_pending &&
- !per_cpu(rcu_preempt_data, cpu).passed_quiesce)
+ __this_cpu_read(rcu_preempt_data.qs_pending) &&
+ !__this_cpu_read(rcu_preempt_data.passed_quiesce))
t->rcu_read_unlock_special.b.need_qs = true;
}
__rcu_read_unlock();
}
-#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+#else /* #ifdef CONFIG_PREEMPT_RCU */
static struct rcu_state *rcu_state_p = &rcu_sched_state;
* Because preemptible RCU does not exist, we never have to check for
* CPUs being in quiescent states.
*/
-static void rcu_preempt_note_context_switch(int cpu)
+static void rcu_preempt_note_context_switch(void)
{
}
* Because preemptible RCU does not exist, it never has any callbacks
* to check.
*/
-static void rcu_preempt_check_callbacks(int cpu)
+static void rcu_preempt_check_callbacks(void)
{
}
{
}
-#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
+#endif /* #else #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_RCU_BOOST
smp_mb__after_unlock_lock();
rnp->boost_kthread_task = t;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
- sp.sched_priority = RCU_BOOST_PRIO;
+ sp.sched_priority = kthread_prio;
sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */
return 0;
{
struct sched_param sp;
- sp.sched_priority = RCU_KTHREAD_PRIO;
+ sp.sched_priority = kthread_prio;
sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
}
* any flavor of RCU.
*/
#ifndef CONFIG_RCU_NOCB_CPU_ALL
-int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
+int rcu_needs_cpu(unsigned long *delta_jiffies)
{
*delta_jiffies = ULONG_MAX;
- return rcu_cpu_has_callbacks(cpu, NULL);
+ return rcu_cpu_has_callbacks(NULL);
}
#endif /* #ifndef CONFIG_RCU_NOCB_CPU_ALL */
* Because we do not have RCU_FAST_NO_HZ, don't bother cleaning up
* after it.
*/
-static void rcu_cleanup_after_idle(int cpu)
+static void rcu_cleanup_after_idle(void)
{
}
* Do the idle-entry grace-period work, which, because CONFIG_RCU_FAST_NO_HZ=n,
* is nothing.
*/
-static void rcu_prepare_for_idle(int cpu)
+static void rcu_prepare_for_idle(void)
{
}
* The caller must have disabled interrupts.
*/
#ifndef CONFIG_RCU_NOCB_CPU_ALL
-int rcu_needs_cpu(int cpu, unsigned long *dj)
+int rcu_needs_cpu(unsigned long *dj)
{
- struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
/* Snapshot to detect later posting of non-lazy callback. */
rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted;
/* If no callbacks, RCU doesn't need the CPU. */
- if (!rcu_cpu_has_callbacks(cpu, &rdtp->all_lazy)) {
+ if (!rcu_cpu_has_callbacks(&rdtp->all_lazy)) {
*dj = ULONG_MAX;
return 0;
}
*
* The caller must have disabled interrupts.
*/
-static void rcu_prepare_for_idle(int cpu)
+static void rcu_prepare_for_idle(void)
{
#ifndef CONFIG_RCU_NOCB_CPU_ALL
bool needwake;
struct rcu_data *rdp;
- struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
struct rcu_node *rnp;
struct rcu_state *rsp;
int tne;
/* Handle nohz enablement switches conservatively. */
tne = ACCESS_ONCE(tick_nohz_active);
if (tne != rdtp->tick_nohz_enabled_snap) {
- if (rcu_cpu_has_callbacks(cpu, NULL))
+ if (rcu_cpu_has_callbacks(NULL))
invoke_rcu_core(); /* force nohz to see update. */
rdtp->tick_nohz_enabled_snap = tne;
return;
return;
/* If this is a no-CBs CPU, no callbacks, just return. */
- if (rcu_is_nocb_cpu(cpu))
+ if (rcu_is_nocb_cpu(smp_processor_id()))
return;
/*
return;
rdtp->last_accelerate = jiffies;
for_each_rcu_flavor(rsp) {
- rdp = per_cpu_ptr(rsp->rda, cpu);
+ rdp = this_cpu_ptr(rsp->rda);
if (!*rdp->nxttail[RCU_DONE_TAIL])
continue;
rnp = rdp->mynode;
* any grace periods that elapsed while the CPU was idle, and if any
* callbacks are now ready to invoke, initiate invocation.
*/
-static void rcu_cleanup_after_idle(int cpu)
+static void rcu_cleanup_after_idle(void)
{
#ifndef CONFIG_RCU_NOCB_CPU_ALL
- if (rcu_is_nocb_cpu(cpu))
+ if (rcu_is_nocb_cpu(smp_processor_id()))
return;
if (rcu_try_advance_all_cbs())
invoke_rcu_core();
rdp->nocb_leader = rdp_spawn;
if (rdp_last && rdp != rdp_spawn)
rdp_last->nocb_next_follower = rdp;
- rdp_last = rdp;
- rdp = rdp->nocb_next_follower;
- rdp_last->nocb_next_follower = NULL;
+ if (rdp == rdp_spawn) {
+ rdp = rdp->nocb_next_follower;
+ } else {
+ rdp_last = rdp;
+ rdp = rdp->nocb_next_follower;
+ rdp_last->nocb_next_follower = NULL;
+ }
} while (rdp);
rdp_spawn->nocb_next_follower = rdp_old_leader;
}
* to detect full-system idle states, not RCU quiescent states and grace
* periods. The caller must have disabled interrupts.
*/
-static void rcu_sysidle_enter(struct rcu_dynticks *rdtp, int irq)
+static void rcu_sysidle_enter(int irq)
{
unsigned long j;
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
/* If there are no nohz_full= CPUs, no need to track this. */
if (!tick_nohz_full_enabled())
* usermode execution does -not- count as idle here! The caller must
* have disabled interrupts.
*/
-static void rcu_sysidle_exit(struct rcu_dynticks *rdtp, int irq)
+static void rcu_sysidle_exit(int irq)
{
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
+
/* If there are no nohz_full= CPUs, no need to track this. */
if (!tick_nohz_full_enabled())
return;
#else /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
-static void rcu_sysidle_enter(struct rcu_dynticks *rdtp, int irq)
+static void rcu_sysidle_enter(int irq)
{
}
-static void rcu_sysidle_exit(struct rcu_dynticks *rdtp, int irq)
+static void rcu_sysidle_exit(int irq)
{
}
EXPORT_SYMBOL_GPL(rcuhead_debug_descr);
#endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) || defined(CONFIG_RCU_TRACE)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU) || defined(CONFIG_RCU_TRACE)
void do_trace_rcu_torture_read(const char *rcutorturename, struct rcu_head *rhp,
unsigned long secs,
unsigned long c_old, unsigned long c)
struct rcu_head *next;
LIST_HEAD(rcu_tasks_holdouts);
- /* FIXME: Add housekeeping affinity. */
+ /* Run on housekeeping CPUs by default. Sysadm can move if desired. */
+ housekeeping_affine(current);
/*
* Each pass through the following loop makes one check for
}
#endif /* #ifdef CONFIG_TASKS_RCU */
+
+#ifdef CONFIG_PROVE_RCU
+
+/*
+ * Early boot self test parameters, one for each flavor
+ */
+static bool rcu_self_test;
+static bool rcu_self_test_bh;
+static bool rcu_self_test_sched;
+
+module_param(rcu_self_test, bool, 0444);
+module_param(rcu_self_test_bh, bool, 0444);
+module_param(rcu_self_test_sched, bool, 0444);
+
+static int rcu_self_test_counter;
+
+static void test_callback(struct rcu_head *r)
+{
+ rcu_self_test_counter++;
+ pr_info("RCU test callback executed %d\n", rcu_self_test_counter);
+}
+
+static void early_boot_test_call_rcu(void)
+{
+ static struct rcu_head head;
+
+ call_rcu(&head, test_callback);
+}
+
+static void early_boot_test_call_rcu_bh(void)
+{
+ static struct rcu_head head;
+
+ call_rcu_bh(&head, test_callback);
+}
+
+static void early_boot_test_call_rcu_sched(void)
+{
+ static struct rcu_head head;
+
+ call_rcu_sched(&head, test_callback);
+}
+
+void rcu_early_boot_tests(void)
+{
+ pr_info("Running RCU self tests\n");
+
+ if (rcu_self_test)
+ early_boot_test_call_rcu();
+ if (rcu_self_test_bh)
+ early_boot_test_call_rcu_bh();
+ if (rcu_self_test_sched)
+ early_boot_test_call_rcu_sched();
+}
+
+static int rcu_verify_early_boot_tests(void)
+{
+ int ret = 0;
+ int early_boot_test_counter = 0;
+
+ if (rcu_self_test) {
+ early_boot_test_counter++;
+ rcu_barrier();
+ }
+ if (rcu_self_test_bh) {
+ early_boot_test_counter++;
+ rcu_barrier_bh();
+ }
+ if (rcu_self_test_sched) {
+ early_boot_test_counter++;
+ rcu_barrier_sched();
+ }
+
+ if (rcu_self_test_counter != early_boot_test_counter) {
+ WARN_ON(1);
+ ret = -1;
+ }
+
+ return ret;
+}
+late_initcall(rcu_verify_early_boot_tests);
+#else
+void rcu_early_boot_tests(void) {}
+#endif /* CONFIG_PROVE_RCU */
preempt_disable();
cpu = smp_processor_id();
rq = cpu_rq(cpu);
- rcu_note_context_switch(cpu);
+ rcu_note_context_switch();
prev = rq->curr;
schedule_debug(prev);
local_irq_restore(*flags);
break;
}
-
+ /*
+ * This sighand can be already freed and even reused, but
+ * we rely on SLAB_DESTROY_BY_RCU and sighand_ctor() which
+ * initializes ->siglock: this slab can't go away, it has
+ * the same object type, ->siglock can't be reinitialized.
+ *
+ * We need to ensure that tsk->sighand is still the same
+ * after we take the lock, we can race with de_thread() or
+ * __exit_signal(). In the latter case the next iteration
+ * must see ->sighand == NULL.
+ */
spin_lock(&sighand->siglock);
if (likely(sighand == tsk->sighand)) {
rcu_read_unlock();
int error = -ESRCH;
struct task_struct *p;
- rcu_read_lock();
-retry:
- p = pid_task(pid, PIDTYPE_PID);
- if (p) {
- error = group_send_sig_info(sig, info, p);
- if (unlikely(error == -ESRCH))
- /*
- * The task was unhashed in between, try again.
- * If it is dead, pid_task() will return NULL,
- * if we race with de_thread() it will find the
- * new leader.
- */
- goto retry;
- }
- rcu_read_unlock();
+ for (;;) {
+ rcu_read_lock();
+ p = pid_task(pid, PIDTYPE_PID);
+ if (p)
+ error = group_send_sig_info(sig, info, p);
+ rcu_read_unlock();
+ if (likely(!p || error != -ESRCH))
+ return error;
- return error;
+ /*
+ * The task was unhashed in between, try again. If it
+ * is dead, pid_task() will return NULL, if we race with
+ * de_thread() it will find the new leader.
+ */
+ }
}
int kill_proc_info(int sig, struct siginfo *info, pid_t pid)
* in the task stack here.
*/
__do_softirq();
- rcu_note_context_switch(cpu);
+ rcu_note_context_switch();
local_irq_enable();
cond_resched();
return;
last_jiffies = jiffies;
} while (read_seqretry(&jiffies_lock, seq));
- if (rcu_needs_cpu(cpu, &rcu_delta_jiffies) ||
+ if (rcu_needs_cpu(&rcu_delta_jiffies) ||
arch_needs_cpu() || irq_work_needs_cpu()) {
next_jiffies = last_jiffies + 1;
delta_jiffies = 1;
void update_process_times(int user_tick)
{
struct task_struct *p = current;
- int cpu = smp_processor_id();
/* Note: this timer irq context must be accounted for as well. */
account_process_tick(p, user_tick);
run_local_timers();
- rcu_check_callbacks(cpu, user_tick);
+ rcu_check_callbacks(user_tick);
#ifdef CONFIG_IRQ_WORK
if (in_irq())
irq_work_tick();
RCU grace period persists, additional CPU stall warnings are
printed at more widely spaced intervals.
-config RCU_CPU_STALL_VERBOSE
- bool "Print additional per-task information for RCU_CPU_STALL_DETECTOR"
- depends on TREE_PREEMPT_RCU
- default y
- help
- This option causes RCU to printk detailed per-task information
- for any tasks that are stalling the current RCU grace period.
-
- Say N if you are unsure.
-
- Say Y if you want to enable such checks.
-
config RCU_CPU_STALL_INFO
bool "Print additional diagnostics on RCU CPU stall"
- depends on (TREE_RCU || TREE_PREEMPT_RCU) && DEBUG_KERNEL
+ depends on (TREE_RCU || PREEMPT_RCU) && DEBUG_KERNEL
default n
help
For each stalled CPU that is aware of the current RCU grace
touch $T
. $KVM/bin/functions.sh
-. $KVPATH/ver_functions.sh
+. $CONFIGFRAG/ver_functions.sh
config_template=${1}
config_dir=`echo $config_template | sed -e 's,/[^/]*$,,'`
touch $resdir/buildonly
exit 0
fi
-echo $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd
-( $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append "$qemu_append $boot_args"; echo $? > $resdir/qemu-retval ) &
+echo $QEMU $qemu_args -m 512 -kernel $resdir/bzImage -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd
+( $QEMU $qemu_args -m 512 -kernel $resdir/bzImage -append "$qemu_append $boot_args"; echo $? > $resdir/qemu-retval ) &
qemu_pid=$!
commandcompleted=0
echo Monitoring qemu job at pid $qemu_pid
configs=""
cpus=0
ds=`date +%Y.%m.%d-%H:%M:%S`
-kversion=""
. functions.sh
echo " --duration minutes"
echo " --interactive"
echo " --kmake-arg kernel-make-arguments"
- echo " --kversion vN.NN"
echo " --mac nn:nn:nn:nn:nn:nn"
echo " --no-initrd"
echo " --qemu-args qemu-system-..."
TORTURE_KMAKE_ARG="$2"
shift
;;
- --kversion)
- checkarg --kversion "(kernel version)" $# "$2" '^v[0-9.]*$' '^error'
- kversion=$2
- shift
- ;;
--mac)
checkarg --mac "(MAC address)" $# "$2" '^\([0-9a-fA-F]\{2\}:\)\{5\}[0-9a-fA-F]\{2\}$' error
TORTURE_QEMU_MAC=$2
done
CONFIGFRAG=${KVM}/configs/${TORTURE_SUITE}; export CONFIGFRAG
-KVPATH=${CONFIGFRAG}/$kversion; export KVPATH
if test -z "$configs"
then
- configs="`cat $CONFIGFRAG/$kversion/CFLIST`"
+ configs="`cat $CONFIGFRAG/CFLIST`"
fi
if test -z "$resdir"
touch $T/cfgcpu
for CF in $configs
do
- if test -f "$CONFIGFRAG/$kversion/$CF"
+ if test -f "$CONFIGFRAG/$CF"
then
- cpu_count=`configNR_CPUS.sh $CONFIGFRAG/$kversion/$CF`
- cpu_count=`configfrag_boot_cpus "$TORTURE_BOOTARGS" "$CONFIGFRAG/$kversion/$CF" "$cpu_count"`
+ cpu_count=`configNR_CPUS.sh $CONFIGFRAG/$CF`
+ cpu_count=`configfrag_boot_cpus "$TORTURE_BOOTARGS" "$CONFIGFRAG/$CF" "$cpu_count"`
echo $CF $cpu_count >> $T/cfgcpu
else
echo "The --configs file $CF does not exist, terminating."
cat << ___EOF___ > $T/script
CONFIGFRAG="$CONFIGFRAG"; export CONFIGFRAG
KVM="$KVM"; export KVM
-KVPATH="$KVPATH"; export KVPATH
PATH="$PATH"; export PATH
TORTURE_BOOT_IMAGE="$TORTURE_BOOT_IMAGE"; export TORTURE_BOOT_IMAGE
TORTURE_BUILDONLY="$TORTURE_BUILDONLY"; export TORTURE_BUILDONLY
fi
___EOF___
awk < $T/cfgcpu.pack \
- -v CONFIGDIR="$CONFIGFRAG/$kversion/" \
+ -v CONFIGDIR="$CONFIGFRAG/" \
-v KVM="$KVM" \
-v ncpus=$cpus \
-v rd=$resdir/$ds/ \
CONFIG_NO_HZ_IDLE=n
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_TRACE=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_COUNT=y
--- /dev/null
+rcupdate.rcu_self_test=1
+rcupdate.rcu_self_test_bh=1
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU_ZERO=y
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=y
CONFIG_NO_HZ_IDLE=n
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
+CONFIG_RCU_KTHREAD_PRIO=2
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
rcutorture.torture_type=sched
+rcupdate.rcu_self_test_sched=1
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
--- /dev/null
+rcupdate.rcu_self_test=1
+rcupdate.rcu_self_test_bh=1
+rcupdate.rcu_self_test_sched=1
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_DEBUG_LOCK_ALLOC=n
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
rcutorture.torture_type=sched
+rcupdate.rcu_self_test=1
+rcupdate.rcu_self_test_sched=1
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
+++ /dev/null
-P1-S-T-NH-SD-SMP-HP
-P2-2-t-nh-sd-SMP-hp
-P3-3-T-nh-SD-SMP-hp
-P4-A-t-NH-sd-SMP-HP
-P5-U-T-NH-sd-SMP-hp
-N1-S-T-NH-SD-SMP-HP
-N2-2-t-nh-sd-SMP-hp
-N3-3-T-nh-SD-SMP-hp
-N4-A-t-NH-sd-SMP-HP
-N5-U-T-NH-sd-SMP-hp
-PT1-nh
-PT2-NH
-NT1-nh
-NT3-NH
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#!/bin/bash
-#
-# Kernel-version-dependent shell functions for the rest of the scripts.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
-#
-# Copyright (C) IBM Corporation, 2013
-#
-# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
-
-# per_version_boot_params bootparam-string config-file seconds
-#
-# Adds per-version torture-module parameters to kernels supporting them.
-# Which old kernels do not.
-per_version_boot_params () {
- echo rcutorture.stat_interval=15 \
- rcutorture.shutdown_secs=$3 \
- rcutorture.rcutorture_runnable=1 \
- rcutorture.test_no_idle_hz=1 \
- rcutorture.verbose=1
-}
+++ /dev/null
-sysidleY.2013.06.19a
-sysidleN.2013.06.19a
-P1-S-T-NH-SD-SMP-HP
-P2-2-t-nh-sd-SMP-hp
-P3-3-T-nh-SD-SMP-hp
-P4-A-t-NH-sd-SMP-HP
-P5-U-T-NH-sd-SMP-hp
-P6---t-nh-SD-smp-hp
-N1-S-T-NH-SD-SMP-HP
-N2-2-t-nh-sd-SMP-hp
-N3-3-T-nh-SD-SMP-hp
-N4-A-t-NH-sd-SMP-HP
-N5-U-T-NH-sd-SMP-hp
-PT1-nh
-PT2-NH
-NT1-nh
-NT3-NH
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_NR_CPUS=1
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_RCU_NOCB_CPU=y
-CONFIG_RCU_NOCB_CPU_NONE=y
-CONFIG_RCU_NOCB_CPU_ZERO=n
-CONFIG_RCU_NOCB_CPU_ALL=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=14
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=n
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_RCU_NOCB_CPU=y
-CONFIG_RCU_NOCB_CPU_NONE=n
-CONFIG_RCU_NOCB_CPU_ZERO=n
-CONFIG_RCU_NOCB_CPU_ALL=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLUB=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_RCU_NOCB_CPU=y
-CONFIG_RCU_NOCB_CPU_NONE=y
-CONFIG_RCU_NOCB_CPU_ZERO=n
-CONFIG_RCU_NOCB_CPU_ALL=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLUB=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_RCU_NOCB_CPU=y
-CONFIG_RCU_NOCB_CPU_NONE=y
-CONFIG_RCU_NOCB_CPU_ZERO=n
-CONFIG_RCU_NOCB_CPU_ALL=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLUB=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_RCU_NOCB_CPU=y
-CONFIG_RCU_NOCB_CPU_NONE=n
-CONFIG_RCU_NOCB_CPU_ZERO=y
-CONFIG_RCU_NOCB_CPU_ALL=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLUB=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-P1-S-T-NH-SD-SMP-HP
-P2-2-t-nh-sd-SMP-hp
-P3-3-T-nh-SD-SMP-hp
-P4-A-t-NH-sd-SMP-HP
-P5-U-T-NH-sd-SMP-hp
-N1-S-T-NH-SD-SMP-HP
-N2-2-t-nh-sd-SMP-hp
-N3-3-T-nh-SD-SMP-hp
-N4-A-t-NH-sd-SMP-HP
-N5-U-T-NH-sd-SMP-hp
-PT1-nh
-PT2-NH
-NT1-nh
-NT3-NH
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#!/bin/bash
-#
-# Kernel-version-dependent shell functions for the rest of the scripts.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
-#
-# Copyright (C) IBM Corporation, 2013
-#
-# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
-
-# rcutorture_param_onoff bootparam-string config-file
-#
-# Adds onoff rcutorture module parameters to kernels having it.
-rcutorture_param_onoff () {
- if ! bootparam_hotplug_cpu "$1" && configfrag_hotplug_cpu "$2"
- then
- echo CPU-hotplug kernel, adding rcutorture onoff. 1>&2
- echo rcutorture.onoff_interval=3 rcutorture.onoff_holdoff=30
- fi
-}
-
-# per_version_boot_params bootparam-string config-file seconds
-#
-# Adds per-version torture-module parameters to kernels supporting them.
-per_version_boot_params () {
- echo $1 `rcutorture_param_onoff "$1" "$2"` \
- rcutorture.stat_interval=15 \
- rcutorture.shutdown_secs=$3 \
- rcutorture.rcutorture_runnable=1 \
- rcutorture.test_no_idle_hz=1 \
- rcutorture.verbose=1
-}
+++ /dev/null
-P1-S-T-NH-SD-SMP-HP
-P2-2-t-nh-sd-SMP-hp
-P3-3-T-nh-SD-SMP-hp
-P4-A-t-NH-sd-SMP-HP
-P5-U-T-NH-sd-SMP-hp
-N1-S-T-NH-SD-SMP-HP
-N2-2-t-nh-sd-SMP-hp
-N3-3-T-nh-SD-SMP-hp
-N4-A-t-NH-sd-SMP-HP
-N5-U-T-NH-sd-SMP-hp
-PT1-nh
-PT2-NH
-NT1-nh
-NT3-NH
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#!/bin/bash
-#
-# Kernel-version-dependent shell functions for the rest of the scripts.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
-#
-# Copyright (C) IBM Corporation, 2013
-#
-# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
-
-# rcutorture_param_n_barrier_cbs bootparam-string
-#
-# Adds n_barrier_cbs rcutorture module parameter to kernels having it.
-rcutorture_param_n_barrier_cbs () {
- if echo $1 | grep -q "rcutorture\.n_barrier_cbs"
- then
- :
- else
- echo rcutorture.n_barrier_cbs=4
- fi
-}
-
-# rcutorture_param_onoff bootparam-string config-file
-#
-# Adds onoff rcutorture module parameters to kernels having it.
-rcutorture_param_onoff () {
- if ! bootparam_hotplug_cpu "$1" && configfrag_hotplug_cpu "$2"
- then
- echo CPU-hotplug kernel, adding rcutorture onoff. 1>&2
- echo rcutorture.onoff_interval=3 rcutorture.onoff_holdoff=30
- fi
-}
-
-# per_version_boot_params bootparam-string config-file seconds
-#
-# Adds per-version torture-module parameters to kernels supporting them.
-per_version_boot_params () {
- echo $1 `rcutorture_param_onoff "$1" "$2"` \
- `rcutorture_param_n_barrier_cbs "$1"` \
- rcutorture.stat_interval=15 \
- rcutorture.shutdown_secs=$3 \
- rcutorture.rcutorture_runnable=1 \
- rcutorture.test_no_idle_hz=1 \
- rcutorture.verbose=1
-}
CONFIG_PREEMPT_RCU
CONFIG_SMP
CONFIG_TINY_RCU
-CONFIG_TREE_PREEMPT_RCU
+CONFIG_PREEMPT_RCU
CONFIG_TREE_RCU
All forced by CONFIG_TINY_RCU.
This document gives a brief rationale for the TREE_RCU-related test
-cases, a group that includes TREE_PREEMPT_RCU.
+cases, a group that includes PREEMPT_RCU.
Kconfig Parameters:
CONFIG_PREEMPT -- Do half. (First three and #8.)
CONFIG_PROVE_LOCKING -- Do all but two, covering CONFIG_PROVE_RCU and not.
CONFIG_PROVE_RCU -- Do all but one under CONFIG_PROVE_LOCKING.
-CONFIG_RCU_BOOST -- one of TREE_PREEMPT_RCU.
-CONFIG_RCU_BOOST_PRIO -- set to 2 for _BOOST testing.
-CONFIG_RCU_CPU_STALL_INFO -- do one with and without _VERBOSE.
-CONFIG_RCU_CPU_STALL_VERBOSE -- do one with and without _INFO.
+CONFIG_RCU_BOOST -- one of PREEMPT_RCU.
+CONFIG_RCU_KTHREAD_PRIO -- set to 2 for _BOOST testing.
+CONFIG_RCU_CPU_STALL_INFO -- Do one.
CONFIG_RCU_FANOUT -- Cover hierarchy as currently, but overlap with others.
CONFIG_RCU_FANOUT_EXACT -- Do one.
CONFIG_RCU_FANOUT_LEAF -- Do one non-default.
CONFIG_RCU_NOCB_CPU_NONE -- Do one.
CONFIG_RCU_NOCB_CPU_ZERO -- Do one.
CONFIG_RCU_TRACE -- Do half.
-CONFIG_SMP -- Need one !SMP for TREE_PREEMPT_RCU.
+CONFIG_SMP -- Need one !SMP for PREEMPT_RCU.
RCU-bh: Do one with PREEMPT and one with !PREEMPT.
RCU-sched: Do one with PREEMPT but not BOOST.
CONFIG_RCU_STALL_COMMON
- Implied by TREE_RCU and TREE_PREEMPT_RCU.
+ Implied by TREE_RCU and PREEMPT_RCU.
CONFIG_RCU_TORTURE_TEST
CONFIG_RCU_TORTURE_TEST_RUNNABLE
Redundant with CONFIG_NO_HZ_FULL.
-CONFIG_TREE_PREEMPT_RCU
+CONFIG_PREEMPT_RCU
CONFIG_TREE_RCU
These are controlled by CONFIG_PREEMPT.