rtl8xxxu: Initialize burst parameters for 8723bu

Implement burst parameter sequence for 8723bu parts. Eventually this
should be moved into device specific sections.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index 6611128..6314825 100644 (file)
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -6278,6 +6278,39 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
        rtl8xxxu_write8(priv, REG_BEACON_DMA_TIME, BEACON_DMA_ATIME_INT_TIME);
        rtl8xxxu_write16(priv, REG_BEACON_TCFG, 0x660F);
 
+       /*
+        * Initialize burst parameters
+        */
+       if (priv->rtlchip == 0x8723b) {
+               /*
+                * For USB high speed set 512B packets
+                */
+               val8 = rtl8xxxu_read8(priv, REG_RXDMA_PRO_8723B);
+               val8 &= ~(BIT(4) | BIT(5));
+               val8 |= BIT(4);
+               val8 |= BIT(1) | BIT(2) | BIT(3);
+               rtl8xxxu_write8(priv, REG_RXDMA_PRO_8723B, val8);
+
+               /*
+                * For USB high speed set 512B packets
+                */
+               val8 = rtl8xxxu_read8(priv, REG_HT_SINGLE_AMPDU_8723B);
+               val8 |= BIT(7);
+               rtl8xxxu_write8(priv, REG_HT_SINGLE_AMPDU_8723B, val8);
+
+               rtl8xxxu_write16(priv, REG_MAX_AGGR_NUM, 0x0c14);
+               rtl8xxxu_write8(priv, REG_AMPDU_MAX_TIME_8723B, 0x5e);
+               rtl8xxxu_write32(priv, REG_AGGLEN_LMT, 0xffffffff);
+               rtl8xxxu_write8(priv, REG_RX_PKT_LIMIT, 0x18);
+               rtl8xxxu_write8(priv, REG_PIFS, 0x00);
+               rtl8xxxu_write8(priv, REG_USTIME_TSF_8723B, 0x50);
+               rtl8xxxu_write8(priv, REG_USTIME_EDCA, 0x50);
+
+               val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL);
+               val8 |= BIT(5) | BIT(6);
+               rtl8xxxu_write8(priv, REG_RSV_CTRL, val8);
+       }
+
        /*
         * Enable CCK and OFDM block
         */

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
index 5250388..8209830 100644 (file)
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h
@@ -405,7 +405,7 @@
 
 /* Presumably only found on newer chips such as 8723bu */
 #define REG_RX_DMA_CTRL_8723B          0x0286
-#define REG_RX_DMA_MODE_CTRL_8723B     0x0290
+#define REG_RXDMA_PRO_8723B            0x0290
 
 #define REG_RF_BB_CMD_ADDR             0x02c0
 #define REG_RF_BB_CMD_DATA             0x02c4
@@ -478,6 +478,7 @@
 #define REG_ARFR1                      0x0448
 #define REG_ARFR2                      0x044c
 #define REG_ARFR3                      0x0450
+#define REG_AMPDU_MAX_TIME_8723B       0x0456
 #define REG_AGGLEN_LMT                 0x0458
 #define REG_AMPDU_MIN_SPACE            0x045c
 #define REG_TXPKTBUF_WMAC_LBK_BF_HD    0x045d
@@ -496,6 +497,7 @@
 #define REG_PKT_VO_VI_LIFE_TIME                0x04c0
 #define REG_PKT_BE_BK_LIFE_TIME                0x04c2
 #define REG_STBC_SETTING               0x04c4
+#define REG_HT_SINGLE_AMPDU_8723B      0x04c7
 #define REG_PROT_MODE_CTRL             0x04c8
 #define REG_MAX_AGGR_NUM               0x04ca
 #define REG_RTS_MAX_AGGR_NUM           0x04cb
@@ -560,6 +562,7 @@
 #define  BEACON_DMA_ATIME_INT_TIME     2
 
 #define REG_ATIMWND                    0x055a
+#define REG_USTIME_TSF_8723B           0x055c
 #define REG_BCN_MAX_ERR                        0x055d
 #define REG_RXTSF_OFFSET_CCK           0x055e
 #define REG_RXTSF_OFFSET_OFDM          0x055f