obj-y += time.o ioport.o ldt.o dumpstack.o
obj-y += setup.o x86_init.o i8259.o irqinit.o jump_label.o
obj-$(CONFIG_IRQ_WORK) += irq_work.o
-obj-$(CONFIG_X86_VISWS) += visws_quirks.o
obj-$(CONFIG_X86_32) += probe_roms_32.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
+++ /dev/null
-/*
- * SGI Visual Workstation support and quirks, unmaintained.
- *
- * Split out from setup.c by davej@suse.de
- *
- * Copyright (C) 1999 Bent Hagemark, Ingo Molnar
- *
- * SGI Visual Workstation interrupt controller
- *
- * The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
- * which serves as the main interrupt controller in the system. Non-legacy
- * hardware in the system uses this controller directly. Legacy devices
- * are connected to the PIIX4 which in turn has its 8259(s) connected to
- * a of the Cobalt APIC entry.
- *
- * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
- *
- * 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
- */
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-
-#include <asm/visws/cobalt.h>
-#include <asm/visws/piix4.h>
-#include <asm/io_apic.h>
-#include <asm/fixmap.h>
-#include <asm/reboot.h>
-#include <asm/setup.h>
-#include <asm/apic.h>
-#include <asm/e820.h>
-#include <asm/time.h>
-#include <asm/io.h>
-
-#include <linux/kernel_stat.h>
-
-#include <asm/i8259.h>
-#include <asm/irq_vectors.h>
-#include <asm/visws/lithium.h>
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-
-extern int no_broadcast;
-
-char visws_board_type = -1;
-char visws_board_rev = -1;
-
-static void __init visws_time_init(void)
-{
- printk(KERN_INFO "Starting Cobalt Timer system clock\n");
-
- /* Set the countdown value */
- co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
-
- /* Start the timer */
- co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
-
- /* Enable (unmask) the timer interrupt */
- co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
-
- setup_default_timer_irq();
-}
-
-/* Replaces the default init_ISA_irqs in the generic setup */
-static void __init visws_pre_intr_init(void);
-
-/* Quirk for machine specific memory setup. */
-
-#define MB (1024 * 1024)
-
-unsigned long sgivwfb_mem_phys;
-unsigned long sgivwfb_mem_size;
-EXPORT_SYMBOL(sgivwfb_mem_phys);
-EXPORT_SYMBOL(sgivwfb_mem_size);
-
-long long mem_size __initdata = 0;
-
-static char * __init visws_memory_setup(void)
-{
- long long gfx_mem_size = 8 * MB;
-
- mem_size = boot_params.alt_mem_k;
-
- if (!mem_size) {
- printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
- mem_size = 128 * MB;
- }
-
- /*
- * this hardcodes the graphics memory to 8 MB
- * it really should be sized dynamically (or at least
- * set as a boot param)
- */
- if (!sgivwfb_mem_size) {
- printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
- sgivwfb_mem_size = 8 * MB;
- }
-
- /*
- * Trim to nearest MB
- */
- sgivwfb_mem_size &= ~((1 << 20) - 1);
- sgivwfb_mem_phys = mem_size - gfx_mem_size;
-
- e820_add_region(0, LOWMEMSIZE(), E820_RAM);
- e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
- e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
-
- return "PROM";
-}
-
-static void visws_machine_emergency_restart(void)
-{
- /*
- * Visual Workstations restart after this
- * register is poked on the PIIX4
- */
- outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
-}
-
-static void visws_machine_power_off(void)
-{
- unsigned short pm_status;
-/* extern unsigned int pci_bus0; */
-
- while ((pm_status = inw(PMSTS_PORT)) & 0x100)
- outw(pm_status, PMSTS_PORT);
-
- outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
-
- mdelay(10);
-
-#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
- (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
-
-/* outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */
- outl(PIIX_SPECIAL_STOP, 0xCFC);
-}
-
-static void __init visws_get_smp_config(unsigned int early)
-{
-}
-
-/*
- * The Visual Workstation is Intel MP compliant in the hardware
- * sense, but it doesn't have a BIOS(-configuration table).
- * No problem for Linux.
- */
-
-static void __init MP_processor_info(struct mpc_cpu *m)
-{
- int ver, logical_apicid;
- physid_mask_t apic_cpus;
-
- if (!(m->cpuflag & CPU_ENABLED))
- return;
-
- logical_apicid = m->apicid;
- printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
- m->cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
- m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
- (m->cpufeature & CPU_MODEL_MASK) >> 4, m->apicver);
-
- if (m->cpuflag & CPU_BOOTPROCESSOR)
- boot_cpu_physical_apicid = m->apicid;
-
- ver = m->apicver;
- if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) {
- printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
- m->apicid, MAX_APICS);
- return;
- }
-
- apic->apicid_to_cpu_present(m->apicid, &apic_cpus);
- physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
- /*
- * Validate version
- */
- if (ver == 0x0) {
- printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
- "fixing up to 0x10. (tell your hw vendor)\n",
- m->apicid);
- ver = 0x10;
- }
- apic_version[m->apicid] = ver;
-}
-
-static void __init visws_find_smp_config(void)
-{
- struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS);
- unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
-
- if (ncpus > CO_CPU_MAX) {
- printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
- ncpus, mp);
-
- ncpus = CO_CPU_MAX;
- }
-
- if (ncpus > setup_max_cpus)
- ncpus = setup_max_cpus;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- smp_found_config = 1;
-#endif
- while (ncpus--)
- MP_processor_info(mp++);
-
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-}
-
-static void visws_trap_init(void);
-
-void __init visws_early_detect(void)
-{
- int raw;
-
- visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
- >> PIIX_GPI_BD_SHIFT;
-
- if (visws_board_type < 0)
- return;
-
- /*
- * Override the default platform setup functions
- */
- x86_init.resources.memory_setup = visws_memory_setup;
- x86_init.mpparse.get_smp_config = visws_get_smp_config;
- x86_init.mpparse.find_smp_config = visws_find_smp_config;
- x86_init.irqs.pre_vector_init = visws_pre_intr_init;
- x86_init.irqs.trap_init = visws_trap_init;
- x86_init.timers.timer_init = visws_time_init;
- x86_init.pci.init = pci_visws_init;
- x86_init.pci.init_irq = x86_init_noop;
-
- /*
- * Install reboot quirks:
- */
- pm_power_off = visws_machine_power_off;
- machine_ops.emergency_restart = visws_machine_emergency_restart;
-
- /*
- * Do not use broadcast IPIs:
- */
- no_broadcast = 0;
-
-#ifdef CONFIG_X86_IO_APIC
- /*
- * Turn off IO-APIC detection and initialization:
- */
- skip_ioapic_setup = 1;
-#endif
-
- /*
- * Get Board rev.
- * First, we have to initialize the 307 part to allow us access
- * to the GPIO registers. Let's map them at 0x0fc0 which is right
- * after the PIIX4 PM section.
- */
- outb_p(SIO_DEV_SEL, SIO_INDEX);
- outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */
-
- outb_p(SIO_DEV_MSB, SIO_INDEX);
- outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */
-
- outb_p(SIO_DEV_LSB, SIO_INDEX);
- outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */
-
- outb_p(SIO_DEV_ENB, SIO_INDEX);
- outb_p(1, SIO_DATA); /* Enable GPIO registers. */
-
- /*
- * Now, we have to map the power management section to write
- * a bit which enables access to the GPIO registers.
- * What lunatic came up with this shit?
- */
- outb_p(SIO_DEV_SEL, SIO_INDEX);
- outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */
-
- outb_p(SIO_DEV_MSB, SIO_INDEX);
- outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */
-
- outb_p(SIO_DEV_LSB, SIO_INDEX);
- outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */
-
- outb_p(SIO_DEV_ENB, SIO_INDEX);
- outb_p(1, SIO_DATA); /* Enable PM registers. */
-
- /*
- * Now, write the PM register which enables the GPIO registers.
- */
- outb_p(SIO_PM_FER2, SIO_PM_INDEX);
- outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
-
- /*
- * Now, initialize the GPIO registers.
- * We want them all to be inputs which is the
- * power on default, so let's leave them alone.
- * So, let's just read the board rev!
- */
- raw = inb_p(SIO_GP_DATA1);
- raw &= 0x7f; /* 7 bits of valid board revision ID. */
-
- if (visws_board_type == VISWS_320) {
- if (raw < 0x6) {
- visws_board_rev = 4;
- } else if (raw < 0xc) {
- visws_board_rev = 5;
- } else {
- visws_board_rev = 6;
- }
- } else if (visws_board_type == VISWS_540) {
- visws_board_rev = 2;
- } else {
- visws_board_rev = raw;
- }
-
- printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
- (visws_board_type == VISWS_320 ? "320" :
- (visws_board_type == VISWS_540 ? "540" :
- "unknown")), visws_board_rev);
-}
-
-#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
-#define BCD (LI_INTB | LI_INTC | LI_INTD)
-#define ALLDEVS (A01234 | BCD)
-
-static __init void lithium_init(void)
-{
- set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
- set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
-
- if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
- printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
-/* panic("This machine is not SGI Visual Workstation 320/540"); */
- }
-
- if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
- printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
-/* panic("This machine is not SGI Visual Workstation 320/540"); */
- }
-
- li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
- li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
-}
-
-static __init void cobalt_init(void)
-{
- /*
- * On normal SMP PC this is used only with SMP, but we have to
- * use it and set it up here to start the Cobalt clock
- */
- set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
- setup_local_APIC();
- printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
- (unsigned int)apic_read(APIC_LVR),
- (unsigned int)apic_read(APIC_ID));
-
- set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
- set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
- printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
- co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
-
- /* Enable Cobalt APIC being careful to NOT change the ID! */
- co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
-
- printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
- co_apic_read(CO_APIC_ID));
-}
-
-static void __init visws_trap_init(void)
-{
- lithium_init();
- cobalt_init();
-}
-
-/*
- * IRQ controller / APIC support:
- */
-
-static DEFINE_SPINLOCK(cobalt_lock);
-
-/*
- * Set the given Cobalt APIC Redirection Table entry to point
- * to the given IDT vector/index.
- */
-static inline void co_apic_set(int entry, int irq)
-{
- co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
- co_apic_write(CO_APIC_HI(entry), 0);
-}
-
-/*
- * Cobalt (IO)-APIC functions to handle PCI devices.
- */
-static inline int co_apic_ide0_hack(void)
-{
- extern char visws_board_type;
- extern char visws_board_rev;
-
- if (visws_board_type == VISWS_320 && visws_board_rev == 5)
- return 5;
- return CO_APIC_IDE0;
-}
-
-static int is_co_apic(unsigned int irq)
-{
- if (IS_CO_APIC(irq))
- return CO_APIC(irq);
-
- switch (irq) {
- case 0: return CO_APIC_CPU;
- case CO_IRQ_IDE0: return co_apic_ide0_hack();
- case CO_IRQ_IDE1: return CO_APIC_IDE1;
- default: return -1;
- }
-}
-
-
-/*
- * This is the SGI Cobalt (IO-)APIC:
- */
-static void enable_cobalt_irq(struct irq_data *data)
-{
- co_apic_set(is_co_apic(data->irq), data->irq);
-}
-
-static void disable_cobalt_irq(struct irq_data *data)
-{
- int entry = is_co_apic(data->irq);
-
- co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
- co_apic_read(CO_APIC_LO(entry));
-}
-
-static void ack_cobalt_irq(struct irq_data *data)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- disable_cobalt_irq(data);
- apic_write(APIC_EOI, APIC_EIO_ACK);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip cobalt_irq_type = {
- .name = "Cobalt-APIC",
- .irq_enable = enable_cobalt_irq,
- .irq_disable = disable_cobalt_irq,
- .irq_ack = ack_cobalt_irq,
-};
-
-
-/*
- * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
- * -- not the manner expected by the code in i8259.c.
- *
- * there is a 'master' physical interrupt source that gets sent to
- * the CPU. But in the chipset there are various 'virtual' interrupts
- * waiting to be handled. We represent this to Linux through a 'master'
- * interrupt controller type, and through a special virtual interrupt-
- * controller. Device drivers only see the virtual interrupt sources.
- */
-static unsigned int startup_piix4_master_irq(struct irq_data *data)
-{
- legacy_pic->init(0);
- enable_cobalt_irq(data);
-}
-
-static void end_piix4_master_irq(struct irq_data *data)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cobalt_lock, flags);
- enable_cobalt_irq(data);
- spin_unlock_irqrestore(&cobalt_lock, flags);
-}
-
-static struct irq_chip piix4_master_irq_type = {
- .name = "PIIX4-master",
- .irq_startup = startup_piix4_master_irq,
- .irq_ack = ack_cobalt_irq,
-};
-
-static void pii4_mask(struct irq_data *data) { }
-
-static struct irq_chip piix4_virtual_irq_type = {
- .name = "PIIX4-virtual",
- .mask = pii4_mask,
-};
-
-/*
- * PIIX4-8259 master/virtual functions to handle interrupt requests
- * from legacy devices: floppy, parallel, serial, rtc.
- *
- * None of these get Cobalt APIC entries, neither do they have IDT
- * entries. These interrupts are purely virtual and distributed from
- * the 'master' interrupt source: CO_IRQ_8259.
- *
- * When the 8259 interrupts its handler figures out which of these
- * devices is interrupting and dispatches to its handler.
- *
- * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
- * enable_irq gets the right irq. This 'master' irq is never directly
- * manipulated by any driver.
- */
-static irqreturn_t piix4_master_intr(int irq, void *dev_id)
-{
- unsigned long flags;
- int realirq;
-
- raw_spin_lock_irqsave(&i8259A_lock, flags);
-
- /* Find out what's interrupting in the PIIX4 master 8259 */
- outb(0x0c, 0x20); /* OCW3 Poll command */
- realirq = inb(0x20);
-
- /*
- * Bit 7 == 0 means invalid/spurious
- */
- if (unlikely(!(realirq & 0x80)))
- goto out_unlock;
-
- realirq &= 7;
-
- if (unlikely(realirq == 2)) {
- outb(0x0c, 0xa0);
- realirq = inb(0xa0);
-
- if (unlikely(!(realirq & 0x80)))
- goto out_unlock;
-
- realirq = (realirq & 7) + 8;
- }
-
- /* mask and ack interrupt */
- cached_irq_mask |= 1 << realirq;
- if (unlikely(realirq > 7)) {
- inb(0xa1);
- outb(cached_slave_mask, 0xa1);
- outb(0x60 + (realirq & 7), 0xa0);
- outb(0x60 + 2, 0x20);
- } else {
- inb(0x21);
- outb(cached_master_mask, 0x21);
- outb(0x60 + realirq, 0x20);
- }
-
- raw_spin_unlock_irqrestore(&i8259A_lock, flags);
-
- /*
- * handle this 'virtual interrupt' as a Cobalt one now.
- */
- generic_handle_irq(realirq);
-
- return IRQ_HANDLED;
-
-out_unlock:
- raw_spin_unlock_irqrestore(&i8259A_lock, flags);
- return IRQ_NONE;
-}
-
-static struct irqaction master_action = {
- .handler = piix4_master_intr,
- .name = "PIIX4-8259",
-};
-
-static struct irqaction cascade_action = {
- .handler = no_action,
- .name = "cascade",
-};
-
-static inline void set_piix4_virtual_irq_type(void)
-{
- piix4_virtual_irq_type.enable = i8259A_chip.unmask;
- piix4_virtual_irq_type.disable = i8259A_chip.mask;
- piix4_virtual_irq_type.unmask = i8259A_chip.unmask;
-}
-
-static void __init visws_pre_intr_init(void)
-{
- int i;
-
- set_piix4_virtual_irq_type();
-
- for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
- struct irq_chip *chip = NULL;
-
- if (i == 0)
- chip = &cobalt_irq_type;
- else if (i == CO_IRQ_IDE0)
- chip = &cobalt_irq_type;
- else if (i == CO_IRQ_IDE1)
- >chip = &cobalt_irq_type;
- else if (i == CO_IRQ_8259)
- chip = &piix4_master_irq_type;
- else if (i < CO_IRQ_APIC0)
- chip = &piix4_virtual_irq_type;
- else if (IS_CO_APIC(i))
- chip = &cobalt_irq_type;
-
- if (chip)
- set_irq_chip(i, chip);
- }
-
- setup_irq(CO_IRQ_8259, &master_action);
- setup_irq(2, &cascade_action);
-}
# Platform specific code goes here
obj-y += efi/
obj-y += sfi/
+obj-y += visws/
--- /dev/null
+obj-$(CONFIG_X86_VISWS) += visws_quirks.o
--- /dev/null
+/*
+ * SGI Visual Workstation support and quirks, unmaintained.
+ *
+ * Split out from setup.c by davej@suse.de
+ *
+ * Copyright (C) 1999 Bent Hagemark, Ingo Molnar
+ *
+ * SGI Visual Workstation interrupt controller
+ *
+ * The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
+ * which serves as the main interrupt controller in the system. Non-legacy
+ * hardware in the system uses this controller directly. Legacy devices
+ * are connected to the PIIX4 which in turn has its 8259(s) connected to
+ * a of the Cobalt APIC entry.
+ *
+ * 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
+ *
+ * 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
+ */
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+
+#include <asm/visws/cobalt.h>
+#include <asm/visws/piix4.h>
+#include <asm/io_apic.h>
+#include <asm/fixmap.h>
+#include <asm/reboot.h>
+#include <asm/setup.h>
+#include <asm/apic.h>
+#include <asm/e820.h>
+#include <asm/time.h>
+#include <asm/io.h>
+
+#include <linux/kernel_stat.h>
+
+#include <asm/i8259.h>
+#include <asm/irq_vectors.h>
+#include <asm/visws/lithium.h>
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+extern int no_broadcast;
+
+char visws_board_type = -1;
+char visws_board_rev = -1;
+
+static void __init visws_time_init(void)
+{
+ printk(KERN_INFO "Starting Cobalt Timer system clock\n");
+
+ /* Set the countdown value */
+ co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
+
+ /* Start the timer */
+ co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
+
+ /* Enable (unmask) the timer interrupt */
+ co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
+
+ setup_default_timer_irq();
+}
+
+/* Replaces the default init_ISA_irqs in the generic setup */
+static void __init visws_pre_intr_init(void);
+
+/* Quirk for machine specific memory setup. */
+
+#define MB (1024 * 1024)
+
+unsigned long sgivwfb_mem_phys;
+unsigned long sgivwfb_mem_size;
+EXPORT_SYMBOL(sgivwfb_mem_phys);
+EXPORT_SYMBOL(sgivwfb_mem_size);
+
+long long mem_size __initdata = 0;
+
+static char * __init visws_memory_setup(void)
+{
+ long long gfx_mem_size = 8 * MB;
+
+ mem_size = boot_params.alt_mem_k;
+
+ if (!mem_size) {
+ printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
+ mem_size = 128 * MB;
+ }
+
+ /*
+ * this hardcodes the graphics memory to 8 MB
+ * it really should be sized dynamically (or at least
+ * set as a boot param)
+ */
+ if (!sgivwfb_mem_size) {
+ printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
+ sgivwfb_mem_size = 8 * MB;
+ }
+
+ /*
+ * Trim to nearest MB
+ */
+ sgivwfb_mem_size &= ~((1 << 20) - 1);
+ sgivwfb_mem_phys = mem_size - gfx_mem_size;
+
+ e820_add_region(0, LOWMEMSIZE(), E820_RAM);
+ e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
+ e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
+
+ return "PROM";
+}
+
+static void visws_machine_emergency_restart(void)
+{
+ /*
+ * Visual Workstations restart after this
+ * register is poked on the PIIX4
+ */
+ outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
+}
+
+static void visws_machine_power_off(void)
+{
+ unsigned short pm_status;
+/* extern unsigned int pci_bus0; */
+
+ while ((pm_status = inw(PMSTS_PORT)) & 0x100)
+ outw(pm_status, PMSTS_PORT);
+
+ outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
+
+ mdelay(10);
+
+#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
+ (0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
+
+/* outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */
+ outl(PIIX_SPECIAL_STOP, 0xCFC);
+}
+
+static void __init visws_get_smp_config(unsigned int early)
+{
+}
+
+/*
+ * The Visual Workstation is Intel MP compliant in the hardware
+ * sense, but it doesn't have a BIOS(-configuration table).
+ * No problem for Linux.
+ */
+
+static void __init MP_processor_info(struct mpc_cpu *m)
+{
+ int ver, logical_apicid;
+ physid_mask_t apic_cpus;
+
+ if (!(m->cpuflag & CPU_ENABLED))
+ return;
+
+ logical_apicid = m->apicid;
+ printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
+ m->cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
+ m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
+ (m->cpufeature & CPU_MODEL_MASK) >> 4, m->apicver);
+
+ if (m->cpuflag & CPU_BOOTPROCESSOR)
+ boot_cpu_physical_apicid = m->apicid;
+
+ ver = m->apicver;
+ if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) {
+ printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
+ m->apicid, MAX_APICS);
+ return;
+ }
+
+ apic->apicid_to_cpu_present(m->apicid, &apic_cpus);
+ physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
+ /*
+ * Validate version
+ */
+ if (ver == 0x0) {
+ printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
+ "fixing up to 0x10. (tell your hw vendor)\n",
+ m->apicid);
+ ver = 0x10;
+ }
+ apic_version[m->apicid] = ver;
+}
+
+static void __init visws_find_smp_config(void)
+{
+ struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS);
+ unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
+
+ if (ncpus > CO_CPU_MAX) {
+ printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
+ ncpus, mp);
+
+ ncpus = CO_CPU_MAX;
+ }
+
+ if (ncpus > setup_max_cpus)
+ ncpus = setup_max_cpus;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ smp_found_config = 1;
+#endif
+ while (ncpus--)
+ MP_processor_info(mp++);
+
+ mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+}
+
+static void visws_trap_init(void);
+
+void __init visws_early_detect(void)
+{
+ int raw;
+
+ visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
+ >> PIIX_GPI_BD_SHIFT;
+
+ if (visws_board_type < 0)
+ return;
+
+ /*
+ * Override the default platform setup functions
+ */
+ x86_init.resources.memory_setup = visws_memory_setup;
+ x86_init.mpparse.get_smp_config = visws_get_smp_config;
+ x86_init.mpparse.find_smp_config = visws_find_smp_config;
+ x86_init.irqs.pre_vector_init = visws_pre_intr_init;
+ x86_init.irqs.trap_init = visws_trap_init;
+ x86_init.timers.timer_init = visws_time_init;
+ x86_init.pci.init = pci_visws_init;
+ x86_init.pci.init_irq = x86_init_noop;
+
+ /*
+ * Install reboot quirks:
+ */
+ pm_power_off = visws_machine_power_off;
+ machine_ops.emergency_restart = visws_machine_emergency_restart;
+
+ /*
+ * Do not use broadcast IPIs:
+ */
+ no_broadcast = 0;
+
+#ifdef CONFIG_X86_IO_APIC
+ /*
+ * Turn off IO-APIC detection and initialization:
+ */
+ skip_ioapic_setup = 1;
+#endif
+
+ /*
+ * Get Board rev.
+ * First, we have to initialize the 307 part to allow us access
+ * to the GPIO registers. Let's map them at 0x0fc0 which is right
+ * after the PIIX4 PM section.
+ */
+ outb_p(SIO_DEV_SEL, SIO_INDEX);
+ outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */
+
+ outb_p(SIO_DEV_MSB, SIO_INDEX);
+ outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */
+
+ outb_p(SIO_DEV_LSB, SIO_INDEX);
+ outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */
+
+ outb_p(SIO_DEV_ENB, SIO_INDEX);
+ outb_p(1, SIO_DATA); /* Enable GPIO registers. */
+
+ /*
+ * Now, we have to map the power management section to write
+ * a bit which enables access to the GPIO registers.
+ * What lunatic came up with this shit?
+ */
+ outb_p(SIO_DEV_SEL, SIO_INDEX);
+ outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */
+
+ outb_p(SIO_DEV_MSB, SIO_INDEX);
+ outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */
+
+ outb_p(SIO_DEV_LSB, SIO_INDEX);
+ outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */
+
+ outb_p(SIO_DEV_ENB, SIO_INDEX);
+ outb_p(1, SIO_DATA); /* Enable PM registers. */
+
+ /*
+ * Now, write the PM register which enables the GPIO registers.
+ */
+ outb_p(SIO_PM_FER2, SIO_PM_INDEX);
+ outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
+
+ /*
+ * Now, initialize the GPIO registers.
+ * We want them all to be inputs which is the
+ * power on default, so let's leave them alone.
+ * So, let's just read the board rev!
+ */
+ raw = inb_p(SIO_GP_DATA1);
+ raw &= 0x7f; /* 7 bits of valid board revision ID. */
+
+ if (visws_board_type == VISWS_320) {
+ if (raw < 0x6) {
+ visws_board_rev = 4;
+ } else if (raw < 0xc) {
+ visws_board_rev = 5;
+ } else {
+ visws_board_rev = 6;
+ }
+ } else if (visws_board_type == VISWS_540) {
+ visws_board_rev = 2;
+ } else {
+ visws_board_rev = raw;
+ }
+
+ printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
+ (visws_board_type == VISWS_320 ? "320" :
+ (visws_board_type == VISWS_540 ? "540" :
+ "unknown")), visws_board_rev);
+}
+
+#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
+#define BCD (LI_INTB | LI_INTC | LI_INTD)
+#define ALLDEVS (A01234 | BCD)
+
+static __init void lithium_init(void)
+{
+ set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
+ set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
+
+ if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+ (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
+ printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
+/* panic("This machine is not SGI Visual Workstation 320/540"); */
+ }
+
+ if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
+ (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
+ printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
+/* panic("This machine is not SGI Visual Workstation 320/540"); */
+ }
+
+ li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
+ li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
+}
+
+static __init void cobalt_init(void)
+{
+ /*
+ * On normal SMP PC this is used only with SMP, but we have to
+ * use it and set it up here to start the Cobalt clock
+ */
+ set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
+ setup_local_APIC();
+ printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
+ (unsigned int)apic_read(APIC_LVR),
+ (unsigned int)apic_read(APIC_ID));
+
+ set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
+ set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
+ printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
+ co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
+
+ /* Enable Cobalt APIC being careful to NOT change the ID! */
+ co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
+
+ printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
+ co_apic_read(CO_APIC_ID));
+}
+
+static void __init visws_trap_init(void)
+{
+ lithium_init();
+ cobalt_init();
+}
+
+/*
+ * IRQ controller / APIC support:
+ */
+
+static DEFINE_SPINLOCK(cobalt_lock);
+
+/*
+ * Set the given Cobalt APIC Redirection Table entry to point
+ * to the given IDT vector/index.
+ */
+static inline void co_apic_set(int entry, int irq)
+{
+ co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
+ co_apic_write(CO_APIC_HI(entry), 0);
+}
+
+/*
+ * Cobalt (IO)-APIC functions to handle PCI devices.
+ */
+static inline int co_apic_ide0_hack(void)
+{
+ extern char visws_board_type;
+ extern char visws_board_rev;
+
+ if (visws_board_type == VISWS_320 && visws_board_rev == 5)
+ return 5;
+ return CO_APIC_IDE0;
+}
+
+static int is_co_apic(unsigned int irq)
+{
+ if (IS_CO_APIC(irq))
+ return CO_APIC(irq);
+
+ switch (irq) {
+ case 0: return CO_APIC_CPU;
+ case CO_IRQ_IDE0: return co_apic_ide0_hack();
+ case CO_IRQ_IDE1: return CO_APIC_IDE1;
+ default: return -1;
+ }
+}
+
+
+/*
+ * This is the SGI Cobalt (IO-)APIC:
+ */
+static void enable_cobalt_irq(struct irq_data *data)
+{
+ co_apic_set(is_co_apic(data->irq), data->irq);
+}
+
+static void disable_cobalt_irq(struct irq_data *data)
+{
+ int entry = is_co_apic(data->irq);
+
+ co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
+ co_apic_read(CO_APIC_LO(entry));
+}
+
+static void ack_cobalt_irq(struct irq_data *data)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cobalt_lock, flags);
+ disable_cobalt_irq(data);
+ apic_write(APIC_EOI, APIC_EIO_ACK);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct irq_chip cobalt_irq_type = {
+ .name = "Cobalt-APIC",
+ .irq_enable = enable_cobalt_irq,
+ .irq_disable = disable_cobalt_irq,
+ .irq_ack = ack_cobalt_irq,
+};
+
+
+/*
+ * This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
+ * -- not the manner expected by the code in i8259.c.
+ *
+ * there is a 'master' physical interrupt source that gets sent to
+ * the CPU. But in the chipset there are various 'virtual' interrupts
+ * waiting to be handled. We represent this to Linux through a 'master'
+ * interrupt controller type, and through a special virtual interrupt-
+ * controller. Device drivers only see the virtual interrupt sources.
+ */
+static unsigned int startup_piix4_master_irq(struct irq_data *data)
+{
+ legacy_pic->init(0);
+ enable_cobalt_irq(data);
+}
+
+static void end_piix4_master_irq(struct irq_data *data)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cobalt_lock, flags);
+ enable_cobalt_irq(data);
+ spin_unlock_irqrestore(&cobalt_lock, flags);
+}
+
+static struct irq_chip piix4_master_irq_type = {
+ .name = "PIIX4-master",
+ .irq_startup = startup_piix4_master_irq,
+ .irq_ack = ack_cobalt_irq,
+};
+
+static void pii4_mask(struct irq_data *data) { }
+
+static struct irq_chip piix4_virtual_irq_type = {
+ .name = "PIIX4-virtual",
+ .mask = pii4_mask,
+};
+
+/*
+ * PIIX4-8259 master/virtual functions to handle interrupt requests
+ * from legacy devices: floppy, parallel, serial, rtc.
+ *
+ * None of these get Cobalt APIC entries, neither do they have IDT
+ * entries. These interrupts are purely virtual and distributed from
+ * the 'master' interrupt source: CO_IRQ_8259.
+ *
+ * When the 8259 interrupts its handler figures out which of these
+ * devices is interrupting and dispatches to its handler.
+ *
+ * CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
+ * enable_irq gets the right irq. This 'master' irq is never directly
+ * manipulated by any driver.
+ */
+static irqreturn_t piix4_master_intr(int irq, void *dev_id)
+{
+ unsigned long flags;
+ int realirq;
+
+ raw_spin_lock_irqsave(&i8259A_lock, flags);
+
+ /* Find out what's interrupting in the PIIX4 master 8259 */
+ outb(0x0c, 0x20); /* OCW3 Poll command */
+ realirq = inb(0x20);
+
+ /*
+ * Bit 7 == 0 means invalid/spurious
+ */
+ if (unlikely(!(realirq & 0x80)))
+ goto out_unlock;
+
+ realirq &= 7;
+
+ if (unlikely(realirq == 2)) {
+ outb(0x0c, 0xa0);
+ realirq = inb(0xa0);
+
+ if (unlikely(!(realirq & 0x80)))
+ goto out_unlock;
+
+ realirq = (realirq & 7) + 8;
+ }
+
+ /* mask and ack interrupt */
+ cached_irq_mask |= 1 << realirq;
+ if (unlikely(realirq > 7)) {
+ inb(0xa1);
+ outb(cached_slave_mask, 0xa1);
+ outb(0x60 + (realirq & 7), 0xa0);
+ outb(0x60 + 2, 0x20);
+ } else {
+ inb(0x21);
+ outb(cached_master_mask, 0x21);
+ outb(0x60 + realirq, 0x20);
+ }
+
+ raw_spin_unlock_irqrestore(&i8259A_lock, flags);
+
+ /*
+ * handle this 'virtual interrupt' as a Cobalt one now.
+ */
+ generic_handle_irq(realirq);
+
+ return IRQ_HANDLED;
+
+out_unlock:
+ raw_spin_unlock_irqrestore(&i8259A_lock, flags);
+ return IRQ_NONE;
+}
+
+static struct irqaction master_action = {
+ .handler = piix4_master_intr,
+ .name = "PIIX4-8259",
+};
+
+static struct irqaction cascade_action = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+static inline void set_piix4_virtual_irq_type(void)
+{
+ piix4_virtual_irq_type.enable = i8259A_chip.unmask;
+ piix4_virtual_irq_type.disable = i8259A_chip.mask;
+ piix4_virtual_irq_type.unmask = i8259A_chip.unmask;
+}
+
+static void __init visws_pre_intr_init(void)
+{
+ int i;
+
+ set_piix4_virtual_irq_type();
+
+ for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
+ struct irq_chip *chip = NULL;
+
+ if (i == 0)
+ chip = &cobalt_irq_type;
+ else if (i == CO_IRQ_IDE0)
+ chip = &cobalt_irq_type;
+ else if (i == CO_IRQ_IDE1)
+ >chip = &cobalt_irq_type;
+ else if (i == CO_IRQ_8259)
+ chip = &piix4_master_irq_type;
+ else if (i < CO_IRQ_APIC0)
+ chip = &piix4_virtual_irq_type;
+ else if (IS_CO_APIC(i))
+ chip = &cobalt_irq_type;
+
+ if (chip)
+ set_irq_chip(i, chip);
+ }
+
+ setup_irq(CO_IRQ_8259, &master_action);
+ setup_irq(2, &cascade_action);
+}
projects / cascardo / linux.git / commitdiff