ARM: dts: ls1021a: Add gpio support for ls1021a platform

Add gpio nodes for ls1021a platform dts file. The gpio
IP block of the ls1021a can be supported by the code
drivers/gpio/gpio-mpc8xxx.c.

The compatible "fsl,qoriq-gpio" is used by gpio driver:
drivers/gpio/gpio-mpc8xxx.c to implement general gpio
functionalities.

The chip-specific compatible "fsl,ls1021a-gpio" may be
used to fix potential gpio IP block errata or other
chip-specific gpio issues.

Signed-off-by: Liu Gang <Gang.Liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c0dee50..a5204a5 100644 (file)
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -346,6 +346,46 @@
                        status = "disabled";
                };
 
+               gpio0: gpio@2300000 {
+                       compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+                       reg = <0x0 0x2300000 0x0 0x10000>;
+                       interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpio1: gpio@2310000 {
+                       compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+                       reg = <0x0 0x2310000 0x0 0x10000>;
+                       interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpio2: gpio@2320000 {
+                       compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+                       reg = <0x0 0x2320000 0x0 0x10000>;
+                       interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
+               gpio3: gpio@2330000 {
+                       compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
+                       reg = <0x0 0x2330000 0x0 0x10000>;
+                       interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+
                lpuart0: serial@2950000 {
                        compatible = "fsl,ls1021a-lpuart";
                        reg = <0x0 0x2950000 0x0 0x1000>;