ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes

Enable both gxbb USB controller and add a 5V regulator for the OTG port
VBUS

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
index 5624326..73f1593 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@@ -52,6 +52,19 @@
        chosen {
                stdout-path = "serial0:115200n8";
        };
+
+       usb_vbus: regulator-usb0-vbus {
+               compatible = "regulator-fixed";
+
+               regulator-name = "USB0_VBUS";
+
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+
+               gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+               enable-active-high;
+       };
+
 };
 
 &uart_AO {
@@ -72,3 +85,20 @@
        pinctrl-0 = <&eth_pins>;
        pinctrl-names = "default";
 };
+
+&usb0_phy {
+       status = "okay";
+       phy-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+};
+
+&usb1 {
+       status = "okay";
+};