ARM: dts: imx6qdl: Remove unneeded unit-addresses

The following build warnings are seen when building with 'W=1' option:

Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-1p1@110 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-3p0@120 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-2p5@130 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddcore@140 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddpu@140 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /soc/aips-bus@02000000/anatop@020c8000/regulator-vddsoc@140 has a unit name, but no reg property

Fix them by removing the unneeded unit-addresses.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 294afa7..ed613eb 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -621,7 +621,7 @@
                                             <0 54 IRQ_TYPE_LEVEL_HIGH>,
                                             <0 127 IRQ_TYPE_LEVEL_HIGH>;
 
-                               regulator-1p1@110 {
+                               regulator-1p1 {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "vdd1p1";
                                        regulator-min-microvolt = <800000>;
@@ -635,7 +635,7 @@
                                        anatop-max-voltage = <1375000>;
                                };
 
-                               regulator-3p0@120 {
+                               regulator-3p0 {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "vdd3p0";
                                        regulator-min-microvolt = <2800000>;
@@ -649,7 +649,7 @@
                                        anatop-max-voltage = <3400000>;
                                };
 
-                               regulator-2p5@130 {
+                               regulator-2p5 {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "vdd2p5";
                                        regulator-min-microvolt = <2000000>;
@@ -663,7 +663,7 @@
                                        anatop-max-voltage = <2750000>;
                                };
 
-                               reg_arm: regulator-vddcore@140 {
+                               reg_arm: regulator-vddcore {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "vddarm";
                                        regulator-min-microvolt = <725000>;
@@ -680,7 +680,7 @@
                                        anatop-max-voltage = <1450000>;
                                };
 
-                               reg_pu: regulator-vddpu@140 {
+                               reg_pu: regulator-vddpu {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "vddpu";
                                        regulator-min-microvolt = <725000>;
@@ -697,7 +697,7 @@
                                        anatop-max-voltage = <1450000>;
                                };
 
-                               reg_soc: regulator-vddsoc@140 {
+                               reg_soc: regulator-vddsoc {
                                        compatible = "fsl,anatop-regulator";
                                        regulator-name = "vddsoc";
                                        regulator-min-microvolt = <725000>;