CONFIG_NETDEVICES=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6123=y
CONFIG_NET_DSA_MV88E6171=y
CONFIG_NET_DSA_MV88E6352=y
CONFIG_MV643XX_ETH=y
CONFIG_NETDEVICES=y
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6123=y
CONFIG_NET_DSA_MV88E6171=y
CONFIG_NET_DSA_MV88E6352=y
CONFIG_MV643XX_ETH=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6123=y
CONFIG_MV643XX_ETH=y
CONFIG_MARVELL_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_VETH=m
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6123=y
CONFIG_SKY2=y
CONFIG_PTP_1588_CLOCK_TILEGX=y
# CONFIG_WLAN is not set
CONFIG_VETH=m
CONFIG_NET_DSA_MV88E6060=y
CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6123=y
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_E1000E=y
# CONFIG_WLAN is not set
This enables support for the Marvell 88E6085/6095/6095F/6131
ethernet switch chips.
-config NET_DSA_MV88E6123_61_65
+config NET_DSA_MV88E6123
tristate "Marvell 88E6123/6161/6165 ethernet switch chip support"
depends on NET_DSA
select NET_DSA_MV88E6XXX
obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
obj-$(CONFIG_NET_DSA_MV88E6XXX) += mv88e6xxx_drv.o
mv88e6xxx_drv-y += mv88e6xxx.o
-ifdef CONFIG_NET_DSA_MV88E6123_61_65
-mv88e6xxx_drv-y += mv88e6123_61_65.o
+ifdef CONFIG_NET_DSA_MV88E6123
+mv88e6xxx_drv-y += mv88e6123.o
endif
ifdef CONFIG_NET_DSA_MV88E6131
mv88e6xxx_drv-y += mv88e6131.o
--- /dev/null
+/*
+ * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <net/dsa.h>
+#include "mv88e6xxx.h"
+
+static const struct mv88e6xxx_switch_id mv88e6123_table[] = {
+ { PORT_SWITCH_ID_6123, "Marvell 88E6123" },
+ { PORT_SWITCH_ID_6123_A1, "Marvell 88E6123 (A1)" },
+ { PORT_SWITCH_ID_6123_A2, "Marvell 88E6123 (A2)" },
+ { PORT_SWITCH_ID_6161, "Marvell 88E6161" },
+ { PORT_SWITCH_ID_6161_A1, "Marvell 88E6161 (A1)" },
+ { PORT_SWITCH_ID_6161_A2, "Marvell 88E6161 (A2)" },
+ { PORT_SWITCH_ID_6165, "Marvell 88E6165" },
+ { PORT_SWITCH_ID_6165_A1, "Marvell 88E6165 (A1)" },
+ { PORT_SWITCH_ID_6165_A2, "Marvell 88e6165 (A2)" },
+};
+
+static char *mv88e6123_probe(struct device *host_dev, int sw_addr)
+{
+ return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6123_table,
+ ARRAY_SIZE(mv88e6123_table));
+}
+
+static int mv88e6123_setup_global(struct dsa_switch *ds)
+{
+ u32 upstream_port = dsa_upstream_port(ds);
+ int ret;
+ u32 reg;
+
+ ret = mv88e6xxx_setup_global(ds);
+ if (ret)
+ return ret;
+
+ /* Disable the PHY polling unit (since there won't be any
+ * external PHYs to poll), don't discard packets with
+ * excessive collisions, and mask all interrupt sources.
+ */
+ REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, 0x0000);
+
+ /* Configure the upstream port, and configure the upstream
+ * port as the port to which ingress and egress monitor frames
+ * are to be sent.
+ */
+ reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
+ upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
+ upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
+ REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
+
+ /* Disable remote management for now, and set the switch's
+ * DSA device number.
+ */
+ REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, ds->index & 0x1f);
+
+ return 0;
+}
+
+static int mv88e6123_setup(struct dsa_switch *ds)
+{
+ struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
+ int ret;
+
+ ret = mv88e6xxx_setup_common(ds);
+ if (ret < 0)
+ return ret;
+
+ switch (ps->id) {
+ case PORT_SWITCH_ID_6123:
+ ps->num_ports = 3;
+ break;
+ case PORT_SWITCH_ID_6161:
+ case PORT_SWITCH_ID_6165:
+ ps->num_ports = 6;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ ret = mv88e6xxx_switch_reset(ds, false);
+ if (ret < 0)
+ return ret;
+
+ ret = mv88e6123_setup_global(ds);
+ if (ret < 0)
+ return ret;
+
+ return mv88e6xxx_setup_ports(ds);
+}
+
+struct dsa_switch_driver mv88e6123_switch_driver = {
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
+ .priv_size = sizeof(struct mv88e6xxx_priv_state),
+ .probe = mv88e6123_probe,
+ .setup = mv88e6123_setup,
+ .set_addr = mv88e6xxx_set_addr_indirect,
+ .phy_read = mv88e6xxx_phy_read,
+ .phy_write = mv88e6xxx_phy_write,
+ .get_strings = mv88e6xxx_get_strings,
+ .get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
+ .get_sset_count = mv88e6xxx_get_sset_count,
+ .adjust_link = mv88e6xxx_adjust_link,
+#ifdef CONFIG_NET_DSA_HWMON
+ .get_temp = mv88e6xxx_get_temp,
+#endif
+ .get_regs_len = mv88e6xxx_get_regs_len,
+ .get_regs = mv88e6xxx_get_regs,
+};
+
+MODULE_ALIAS("platform:mv88e6123");
+MODULE_ALIAS("platform:mv88e6161");
+MODULE_ALIAS("platform:mv88e6165");
+++ /dev/null
-/*
- * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
- * Copyright (c) 2008-2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/delay.h>
-#include <linux/jiffies.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <net/dsa.h>
-#include "mv88e6xxx.h"
-
-static const struct mv88e6xxx_switch_id mv88e6123_61_65_table[] = {
- { PORT_SWITCH_ID_6123, "Marvell 88E6123" },
- { PORT_SWITCH_ID_6123_A1, "Marvell 88E6123 (A1)" },
- { PORT_SWITCH_ID_6123_A2, "Marvell 88E6123 (A2)" },
- { PORT_SWITCH_ID_6161, "Marvell 88E6161" },
- { PORT_SWITCH_ID_6161_A1, "Marvell 88E6161 (A1)" },
- { PORT_SWITCH_ID_6161_A2, "Marvell 88E6161 (A2)" },
- { PORT_SWITCH_ID_6165, "Marvell 88E6165" },
- { PORT_SWITCH_ID_6165_A1, "Marvell 88E6165 (A1)" },
- { PORT_SWITCH_ID_6165_A2, "Marvell 88e6165 (A2)" },
-};
-
-static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr)
-{
- return mv88e6xxx_lookup_name(host_dev, sw_addr, mv88e6123_61_65_table,
- ARRAY_SIZE(mv88e6123_61_65_table));
-}
-
-static int mv88e6123_61_65_setup_global(struct dsa_switch *ds)
-{
- u32 upstream_port = dsa_upstream_port(ds);
- int ret;
- u32 reg;
-
- ret = mv88e6xxx_setup_global(ds);
- if (ret)
- return ret;
-
- /* Disable the PHY polling unit (since there won't be any
- * external PHYs to poll), don't discard packets with
- * excessive collisions, and mask all interrupt sources.
- */
- REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, 0x0000);
-
- /* Configure the upstream port, and configure the upstream
- * port as the port to which ingress and egress monitor frames
- * are to be sent.
- */
- reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
- upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
- upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
- REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
-
- /* Disable remote management for now, and set the switch's
- * DSA device number.
- */
- REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, ds->index & 0x1f);
-
- return 0;
-}
-
-static int mv88e6123_61_65_setup(struct dsa_switch *ds)
-{
- struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
- int ret;
-
- ret = mv88e6xxx_setup_common(ds);
- if (ret < 0)
- return ret;
-
- switch (ps->id) {
- case PORT_SWITCH_ID_6123:
- ps->num_ports = 3;
- break;
- case PORT_SWITCH_ID_6161:
- case PORT_SWITCH_ID_6165:
- ps->num_ports = 6;
- break;
- default:
- return -ENODEV;
- }
-
- ret = mv88e6xxx_switch_reset(ds, false);
- if (ret < 0)
- return ret;
-
- ret = mv88e6123_61_65_setup_global(ds);
- if (ret < 0)
- return ret;
-
- return mv88e6xxx_setup_ports(ds);
-}
-
-struct dsa_switch_driver mv88e6123_61_65_switch_driver = {
- .tag_protocol = DSA_TAG_PROTO_EDSA,
- .priv_size = sizeof(struct mv88e6xxx_priv_state),
- .probe = mv88e6123_61_65_probe,
- .setup = mv88e6123_61_65_setup,
- .set_addr = mv88e6xxx_set_addr_indirect,
- .phy_read = mv88e6xxx_phy_read,
- .phy_write = mv88e6xxx_phy_write,
- .get_strings = mv88e6xxx_get_strings,
- .get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
- .get_sset_count = mv88e6xxx_get_sset_count,
- .adjust_link = mv88e6xxx_adjust_link,
-#ifdef CONFIG_NET_DSA_HWMON
- .get_temp = mv88e6xxx_get_temp,
-#endif
- .get_regs_len = mv88e6xxx_get_regs_len,
- .get_regs = mv88e6xxx_get_regs,
-};
-
-MODULE_ALIAS("platform:mv88e6123");
-MODULE_ALIAS("platform:mv88e6161");
-MODULE_ALIAS("platform:mv88e6165");
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
register_switch_driver(&mv88e6131_switch_driver);
#endif
-#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
- register_switch_driver(&mv88e6123_61_65_switch_driver);
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123)
+ register_switch_driver(&mv88e6123_switch_driver);
#endif
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352)
register_switch_driver(&mv88e6352_switch_driver);
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352)
unregister_switch_driver(&mv88e6352_switch_driver);
#endif
-#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65)
- unregister_switch_driver(&mv88e6123_61_65_switch_driver);
+#if IS_ENABLED(CONFIG_NET_DSA_MV88E6123)
+ unregister_switch_driver(&mv88e6123_switch_driver);
#endif
#if IS_ENABLED(CONFIG_NET_DSA_MV88E6131)
unregister_switch_driver(&mv88e6131_switch_driver);
int reg, int val);
extern struct dsa_switch_driver mv88e6131_switch_driver;
-extern struct dsa_switch_driver mv88e6123_61_65_switch_driver;
+extern struct dsa_switch_driver mv88e6123_switch_driver;
extern struct dsa_switch_driver mv88e6352_switch_driver;
extern struct dsa_switch_driver mv88e6171_switch_driver;
projects / cascardo / linux.git / commitdiff