Q: http://patchwork.kernel.org/project/linux-sh/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
S: Supported
+F: arch/arm/boot/dts/emev2*
+F: arch/arm/boot/dts/r7s*
+F: arch/arm/boot/dts/r8a*
+F: arch/arm/boot/dts/sh*
+F: arch/arm/configs/ape6evm_defconfig
+F: arch/arm/configs/armadillo800eva_defconfig
+F: arch/arm/configs/bockw_defconfig
+F: arch/arm/configs/genmai_defconfig
+F: arch/arm/configs/koelsch_defconfig
+F: arch/arm/configs/kzm9g_defconfig
+F: arch/arm/configs/lager_defconfig
+F: arch/arm/configs/mackerel_defconfig
+F: arch/arm/configs/marzen_defconfig
+F: arch/arm/configs/shmobile_defconfig
F: arch/arm/mach-shmobile/
F: drivers/sh/
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
- tx-num-evt = <1>;
- rx-num-evt = <1>;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
};
&tps {
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
- tx-num-evt = <1>;
- rx-num-evt = <1>;
+ tx-num-evt = <32>;
+ rx-num-evt = <32>;
};
&tscadc {
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
+ phy-mode = "rmii";
};
&cpsw_emac1 {
phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rmii";
+};
+
+&phy_sel {
+ rmii-clock-ext;
};
&elm {
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&usb>, <&udphs_clk>;
+ clock-names = "hclk", "pclk";
status = "disabled";
ep0 {
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
regulator-boot-on;
};
l3_iclk_div: l3_iclk_div {
#clock-cells = <0>;
- compatible = "fixed-factor-clock";
+ compatible = "ti,divider-clock";
+ ti,max-div = <2>;
+ ti,bit-shift = <4>;
+ reg = <0x0100>;
clocks = <&dpll_core_h12x2_ck>;
- clock-mult = <1>;
- clock-div = <1>;
+ ti,index-power-of-two;
};
l4_root_clk_div: l4_root_clk_div {
compatible = "fixed-factor-clock";
clocks = <&l3_iclk_div>;
clock-mult = <1>;
- clock-div = <1>;
+ clock-div = <2>;
};
video1_clk2_div: video1_clk2_div {
interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
clocks = <&clock CLK_PWM>;
clock-names = "timers";
- #pwm-cells = <2>;
+ #pwm-cells = <3>;
status = "disabled";
};
* This is called from smp_prepare_cpus if we've built for SMP, but
* we still need to set it up for PM and firmware ops if not.
*/
- if (!IS_ENABLED(SMP))
+ if (!IS_ENABLED(CONFIG_SMP))
exynos_sysram_init();
exynos_cpuidle_init();
boot_reg = sysram_ns_base_addr + 0x1c;
- if (!soc_is_exynos4212() && !soc_is_exynos3250())
- boot_reg += 4*cpu;
+ /*
+ * Almost all Exynos-series of SoCs that run in secure mode don't need
+ * additional offset for every CPU, with Exynos4412 being the only
+ * exception.
+ */
+ if (soc_is_exynos4412())
+ boot_reg += 4 * cpu;
__raw_writel(boot_addr, boot_reg);
return 0;
spin_lock_irqsave(gate->lock, flags);
- if (gate->share_count && --(*gate->share_count) > 0)
- goto out;
+ if (gate->share_count) {
+ if (WARN_ON(*gate->share_count == 0))
+ goto out;
+ else if (--(*gate->share_count) > 0)
+ goto out;
+ }
reg = readl(gate->reg);
reg &= ~(3 << gate->bit_idx);
spin_unlock_irqrestore(gate->lock, flags);
}
-static int clk_gate2_is_enabled(struct clk_hw *hw)
+static int clk_gate2_reg_is_enabled(void __iomem *reg, u8 bit_idx)
{
- u32 reg;
- struct clk_gate2 *gate = to_clk_gate2(hw);
+ u32 val = readl(reg);
- reg = readl(gate->reg);
-
- if (((reg >> gate->bit_idx) & 1) == 1)
+ if (((val >> bit_idx) & 1) == 1)
return 1;
return 0;
}
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+ struct clk_gate2 *gate = to_clk_gate2(hw);
+
+ if (gate->share_count)
+ return !!(*gate->share_count);
+ else
+ return clk_gate2_reg_is_enabled(gate->reg, gate->bit_idx);
+}
+
static struct clk_ops clk_gate2_ops = {
.enable = clk_gate2_enable,
.disable = clk_gate2_disable,
gate->bit_idx = bit_idx;
gate->flags = clk_gate2_flags;
gate->lock = lock;
+
+ /* Initialize share_count per hardware state */
+ if (share_count)
+ *share_count = clk_gate2_reg_is_enabled(reg, bit_idx) ? 1 : 0;
gate->share_count = share_count;
init.name = name;
* (assuming that it is counting N upwards), or -2 if the enclosing loop
* should skip to the next iteration (again assuming N is increasing).
*/
-static int _dpll_test_fint(struct clk_hw_omap *clk, u8 n)
+static int _dpll_test_fint(struct clk_hw_omap *clk, unsigned int n)
{
struct dpll_data *dd;
long fint, fint_min, fint_max;
#define OMAP3430_EN_WDT3_SHIFT 12
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_MASK (1 << 0)
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0
+#define OMAP3430_IVA2_DPLL_FREQSEL_SHIFT 4
#define OMAP3430_IVA2_DPLL_FREQSEL_MASK (0xf << 4)
#define OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT 3
+#define OMAP3430_EN_IVA2_DPLL_SHIFT 0
#define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0)
#define OMAP3430_ST_IVA2_SHIFT 0
#define OMAP3430_ST_IVA2_CLK_MASK (1 << 0)
+#define OMAP3430_AUTO_IVA2_DPLL_SHIFT 0
#define OMAP3430_AUTO_IVA2_DPLL_MASK (0x7 << 0)
#define OMAP3430_IVA2_CLK_SRC_SHIFT 19
#define OMAP3430_IVA2_CLK_SRC_WIDTH 3
}
#endif
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
+#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
+ defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
void omap44xx_restart(enum reboot_mode mode, const char *cmd);
#else
static inline void omap44xx_restart(enum reboot_mode mode, const char *cmd)
static inline void omap_init_audio(void) {}
#endif
-#if defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI) || \
- defined(CONFIG_SND_OMAP_SOC_OMAP_HDMI_MODULE)
-
-static struct platform_device omap_hdmi_audio = {
- .name = "omap-hdmi-audio",
- .id = -1,
-};
-
-static void __init omap_init_hdmi_audio(void)
-{
- struct omap_hwmod *oh;
- struct platform_device *pdev;
-
- oh = omap_hwmod_lookup("dss_hdmi");
- if (!oh)
- return;
-
- pdev = omap_device_build("omap-hdmi-audio-dai", -1, oh, NULL, 0);
- WARN(IS_ERR(pdev),
- "Can't build omap_device for omap-hdmi-audio-dai.\n");
-
- platform_device_register(&omap_hdmi_audio);
-}
-#else
-static inline void omap_init_hdmi_audio(void) {}
-#endif
-
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <linux/platform_data/spi-omap2-mcspi.h>
*/
omap_init_audio();
omap_init_camera();
- omap_init_hdmi_audio();
omap_init_mbox();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {
#ifdef CONFIG_TIDSPBRIDGE_DVFS
#include "omap-pm.h"
#endif
+#include "soc.h"
#include <linux/platform_data/dsp-omap.h>
phys_addr_t size = CONFIG_TIDSPBRIDGE_MEMPOOL_SIZE;
phys_addr_t paddr;
+ if (!cpu_is_omap34xx())
+ return;
+
if (!size)
return;
int err = -ENOMEM;
struct omap_dsp_platform_data *pdata = &omap_dsp_pdata;
+ if (!cpu_is_omap34xx())
+ return 0;
+
pdata->phys_mempool_base = omap_dsp_get_mempool_base();
if (pdata->phys_mempool_base) {
static void __exit omap_dsp_exit(void)
{
+ if (!cpu_is_omap34xx())
+ return;
+
platform_device_unregister(omap_dsp_pdev);
}
module_exit(omap_dsp_exit);
return ret;
}
- for_each_child_of_node(pdev->dev.of_node, child) {
+ for_each_available_child_of_node(pdev->dev.of_node, child) {
if (!child->name)
continue;
};
/* sata */
-static struct omap_hwmod_opt_clk sata_opt_clks[] = {
- { .role = "ref_clk", .clk = "sata_ref_clk" },
-};
static struct omap_hwmod dra7xx_sata_hwmod = {
.name = "sata",
.clkdm_name = "l3init_clkdm",
.flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
.main_clk = "func_48m_fclk",
+ .mpu_rt_idx = 1,
.prcm = {
.omap4 = {
.clkctrl_offs = DRA7XX_CM_L3INIT_SATA_CLKCTRL_OFFSET,
.modulemode = MODULEMODE_SWCTRL,
},
},
- .opt_clks = sata_opt_clks,
- .opt_clks_cnt = ARRAY_SIZE(sata_opt_clks),
};
/*
*
*/
+static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .sysc_flags = (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
+ SYSC_HAS_SIDLEMODE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+ MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = {
.name = "usb_otg_ss",
+ .sysc = &dra7xx_usb_otg_ss_sysc,
};
/* usb_otg_ss1 */
#define OMAP3430_LOGICSTATEST_MASK (1 << 2)
#define OMAP3430_LASTLOGICSTATEENTERED_MASK (1 << 2)
#define OMAP3430_LASTPOWERSTATEENTERED_MASK (0x3 << 0)
+#define OMAP3430_GRPSEL_MCBSP5_MASK (1 << 10)
+#define OMAP3430_GRPSEL_MCBSP1_MASK (1 << 9)
#define OMAP3630_GRPSEL_UART4_MASK (1 << 18)
#define OMAP3430_GRPSEL_GPIO6_MASK (1 << 17)
#define OMAP3430_GRPSEL_GPIO5_MASK (1 << 16)
#define OMAP3430_GRPSEL_GPIO3_MASK (1 << 14)
#define OMAP3430_GRPSEL_GPIO2_MASK (1 << 13)
#define OMAP3430_GRPSEL_UART3_MASK (1 << 11)
+#define OMAP3430_GRPSEL_GPT8_MASK (1 << 9)
+#define OMAP3430_GRPSEL_GPT7_MASK (1 << 8)
+#define OMAP3430_GRPSEL_GPT6_MASK (1 << 7)
+#define OMAP3430_GRPSEL_GPT5_MASK (1 << 6)
#define OMAP3430_GRPSEL_MCBSP4_MASK (1 << 2)
#define OMAP3430_GRPSEL_MCBSP3_MASK (1 << 1)
#define OMAP3430_GRPSEL_MCBSP2_MASK (1 << 0)
exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
}
-static cycle_t exynos4_frc_read(struct clocksource *cs)
+static cycle_t notrace _exynos4_frc_read(void)
{
unsigned int lo, hi;
u32 hi2 = __raw_readl(reg_base + EXYNOS4_MCT_G_CNT_U);
return ((cycle_t)hi << 32) | lo;
}
+static cycle_t exynos4_frc_read(struct clocksource *cs)
+{
+ return _exynos4_frc_read();
+}
+
static void exynos4_frc_resume(struct clocksource *cs)
{
exynos4_mct_frc_start();
static u64 notrace exynos4_read_sched_clock(void)
{
- return exynos4_frc_read(&mct_frc);
+ return _exynos4_frc_read();
+}
+
+static struct delay_timer exynos4_delay_timer;
+
+static cycles_t exynos4_read_current_timer(void)
+{
+ return _exynos4_frc_read();
}
static void __init exynos4_clocksource_init(void)
{
exynos4_mct_frc_start();
+ exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer;
+ exynos4_delay_timer.freq = clk_rate;
+ register_current_timer_delay(&exynos4_delay_timer);
+
if (clocksource_register_hz(&mct_frc, clk_rate))
panic("%s: can't register clocksource\n", mct_frc.name);
projects / cascardo / linux.git / commitdiff