ARM: dts: sun8i: add NAND controller node for A23/A33

A23/A33 has a NAND controller which can now be used properly.

Add a device node for it.

The DMA function cannot work because of changed DMA IP block, so it's
temporarily removed in the device node. However, with PIO mode it can still
work.

Tested on an Aoson M751s tablet with Boris Brezillon's "mtd: nand: allow
vendor specific detection/initialization" patchset, which is needed for the
large-block MLC chip to be recognized correctly.
( http://lists.infradead.org/pipermail/linux-mtd/2016-June/068198.html )

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 7e05e09..6d6509c 100644 (file)
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -239,6 +239,14 @@
                                             "mmc2_sample";
                };
 
+               nand_clk: clk@01c20080 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c20080 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>;
+                       clock-output-names = "nand";
+               };
+
                usb_clk: clk@01c200cc {
                        #clock-cells = <1>;
                        #reset-cells = <1>;
@@ -322,6 +330,19 @@
                        #size-cells = <0>;
                };
 
+               nfc: nand@01c03000 {
+                       compatible = "allwinner,sun4i-a10-nand";
+                       reg = <0x01c03000 0x1000>;
+                       interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ahb1_gates 13>, <&nand_clk>;
+                       clock-names = "ahb", "mod";
+                       resets = <&ahb1_rst 13>;
+                       reset-names = "ahb";
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
                ehci0: usb@01c1a000 {
                        compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
                        reg = <0x01c1a000 0x100>;