ARM: vexpress: Check master site in daughterboard's sysctl operations

With recent enough motherboard firmware, core tile can be fitted
in either of the two daughterboard sites. The non-DT tile code for
V2P-CA9 did not check that when configuring DVI output nor setting
CLCD pixel clock.

Fixed now, providing "get master site" API in motherboard's code.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>

diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index c65cc3b..ab15a55 100644 (file)
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -66,8 +66,15 @@ static void __init ct_ca9x4_init_irq(void)
 
 static void ct_ca9x4_clcd_enable(struct clcd_fb *fb)
 {
-       v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE_DB1, 0);
-       v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE_DB1, 2);
+       u32 site = v2m_get_master_site();
+
+       /*
+        * Old firmware was using the "site" component of the command
+        * to control the DVI muxer (while it should be always 0 ie. MB).
+        * Newer firmware uses the data register. Keep both for compatibility.
+        */
+       v2m_cfg_write(SYS_CFG_MUXFPGA | SYS_CFG_SITE(site), site);
+       v2m_cfg_write(SYS_CFG_DVIMODE | SYS_CFG_SITE(SYS_CFG_SITE_MB), 2);
 }
 
 static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
@@ -112,7 +119,9 @@ static long ct_round(struct clk *clk, unsigned long rate)
 
 static int ct_set(struct clk *clk, unsigned long rate)
 {
-       return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_DB1 | 1, rate);
+       u32 site = v2m_get_master_site();
+
+       return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE(site) | 1, rate);
 }
 
 static const struct clk_ops osc1_clk_ops = {

diff --git a/arch/arm/mach-vexpress/include/mach/motherboard.h b/arch/arm/mach-vexpress/include/mach/motherboard.h
index 31a9289..f004ec9 100644 (file)
--- a/arch/arm/mach-vexpress/include/mach/motherboard.h
+++ b/arch/arm/mach-vexpress/include/mach/motherboard.h
@@ -104,9 +104,10 @@
 #define SYS_CFG_REBOOT         (9 << 20)
 #define SYS_CFG_DVIMODE                (11 << 20)
 #define SYS_CFG_POWER          (12 << 20)
-#define SYS_CFG_SITE_MB                (0 << 16)
-#define SYS_CFG_SITE_DB1       (1 << 16)
-#define SYS_CFG_SITE_DB2       (2 << 16)
+#define SYS_CFG_SITE(n)                ((n) << 16)
+#define SYS_CFG_SITE_MB                0
+#define SYS_CFG_SITE_DB1       1
+#define SYS_CFG_SITE_DB2       2
 #define SYS_CFG_STACK(n)       ((n) << 12)
 
 #define SYS_CFG_ERR            (1 << 1)
@@ -122,6 +123,8 @@ void v2m_flags_set(u32 data);
 #define SYS_MISC_MASTERSITE    (1 << 14)
 #define SYS_PROCIDx_HBI_MASK   0xfff
 
+int v2m_get_master_site(void);
+
 /*
  * Core tile IDs
  */

diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index fde26ad..bb18592 100644 (file)
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -147,6 +147,13 @@ void __init v2m_flags_set(u32 data)
        writel(data, v2m_sysreg_base + V2M_SYS_FLAGSSET);
 }
 
+int v2m_get_master_site(void)
+{
+       u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC);
+
+       return misc & SYS_MISC_MASTERSITE ? SYS_CFG_SITE_DB2 : SYS_CFG_SITE_DB1;
+}
+
 
 static struct resource v2m_pcie_i2c_resource = {
        .start  = V2M_SERIAL_BUS_PCI,
@@ -326,7 +333,8 @@ static long v2m_osc_round(struct clk *clk, unsigned long rate)
 
 static int v2m_osc1_set(struct clk *clk, unsigned long rate)
 {
-       return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE_MB | 1, rate);
+       return v2m_cfg_write(SYS_CFG_OSC | SYS_CFG_SITE(SYS_CFG_SITE_MB) | 1,
+                       rate);
 }
 
 static const struct clk_ops osc1_clk_ops = {
@@ -404,13 +412,13 @@ static void __init v2m_init_early(void)
 
 static void v2m_power_off(void)
 {
-       if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
+       if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0))
                printk(KERN_EMERG "Unable to shutdown\n");
 }
 
 static void v2m_restart(char str, const char *cmd)
 {
-       if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE_MB, 0))
+       if (v2m_cfg_write(SYS_CFG_REBOOT | SYS_CFG_SITE(SYS_CFG_SITE_MB), 0))
                printk(KERN_EMERG "Unable to reboot\n");
 }
 
@@ -605,8 +613,8 @@ void __init v2m_dt_init_early(void)
 
        /* Confirm board type against DT property, if available */
        if (of_property_read_u32(allnodes, "arm,hbi", &dt_hbi) == 0) {
-               u32 misc = readl(v2m_sysreg_base + V2M_SYS_MISC);
-               u32 id = readl(v2m_sysreg_base + (misc & SYS_MISC_MASTERSITE ?
+               int site = v2m_get_master_site();
+               u32 id = readl(v2m_sysreg_base + (site == SYS_CFG_SITE_DB2 ?
                                V2M_SYS_PROCID1 : V2M_SYS_PROCID0));
                u32 hbi = id & SYS_PROCIDx_HBI_MASK;