ARM: STi: DT: STiH41x: Convert all uppercase non-defines to lowercase

Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>

diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index 8509a03..1c41301 100644 (file)
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -11,33 +11,33 @@
 / {
 
        aliases {
-               gpio0   = &PIO0;
-               gpio1   = &PIO1;
-               gpio2   = &PIO2;
-               gpio3   = &PIO3;
-               gpio4   = &PIO4;
-               gpio5   = &PIO5;
-               gpio6   = &PIO6;
-               gpio7   = &PIO7;
-               gpio8   = &PIO8;
-               gpio9   = &PIO9;
-               gpio10  = &PIO10;
-               gpio11  = &PIO11;
-               gpio12  = &PIO12;
-               gpio13  = &PIO13;
-               gpio14  = &PIO14;
-               gpio15  = &PIO15;
-               gpio16  = &PIO16;
-               gpio17  = &PIO17;
-               gpio18  = &PIO18;
-               gpio19  = &PIO100;
-               gpio20  = &PIO101;
-               gpio21  = &PIO102;
-               gpio22  = &PIO103;
-               gpio23  = &PIO104;
-               gpio24  = &PIO105;
-               gpio25  = &PIO106;
-               gpio26  = &PIO107;
+               gpio0   = &pio0;
+               gpio1   = &pio1;
+               gpio2   = &pio2;
+               gpio3   = &pio3;
+               gpio4   = &pio4;
+               gpio5   = &pio5;
+               gpio6   = &pio6;
+               gpio7   = &pio7;
+               gpio8   = &pio8;
+               gpio9   = &pio9;
+               gpio10  = &pio10;
+               gpio11  = &pio11;
+               gpio12  = &pio12;
+               gpio13  = &pio13;
+               gpio14  = &pio14;
+               gpio15  = &pio15;
+               gpio16  = &pio16;
+               gpio17  = &pio17;
+               gpio18  = &pio18;
+               gpio19  = &pio100;
+               gpio20  = &pio101;
+               gpio21  = &pio102;
+               gpio22  = &pio103;
+               gpio23  = &pio104;
+               gpio24  = &pio105;
+               gpio25  = &pio106;
+               gpio26  = &pio107;
        };
 
        soc {
@@ -52,7 +52,7 @@
                        interrupt-names = "irqmux";
                        ranges          = <0 0xfe610000 0x5000>;
 
-                       PIO0: gpio@fe610000 {
+                       pio0: gpio@fe610000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -60,7 +60,7 @@
                                reg             = <0 0x100>;
                                st,bank-name    = "PIO0";
                        };
-                       PIO1: gpio@fe611000 {
+                       pio1: gpio@fe611000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -68,7 +68,7 @@
                                reg             = <0x1000 0x100>;
                                st,bank-name    = "PIO1";
                        };
-                       PIO2: gpio@fe612000 {
+                       pio2: gpio@fe612000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -76,7 +76,7 @@
                                reg             = <0x2000 0x100>;
                                st,bank-name    = "PIO2";
                        };
-                       PIO3: gpio@fe613000 {
+                       pio3: gpio@fe613000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -84,7 +84,7 @@
                                reg             = <0x3000 0x100>;
                                st,bank-name    = "PIO3";
                        };
-                       PIO4: gpio@fe614000 {
+                       pio4: gpio@fe614000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -96,8 +96,8 @@
                        sbc_serial1 {
                                pinctrl_sbc_serial1:sbc_serial1 {
                                        st,pins {
-                                               tx      = <&PIO2 6 ALT3 OUT>;
-                                               rx      = <&PIO2 7 ALT3 IN>;
+                                               tx      = <&pio2 6 ALT3 OUT>;
+                                               rx      = <&pio2 7 ALT3 IN>;
                                        };
                                };
                        };
@@ -105,15 +105,15 @@
                        keyscan {
                                pinctrl_keyscan: keyscan {
                                        st,pins {
-                                               keyin0 = <&PIO0 2 ALT2 IN>;
-                                               keyin1 = <&PIO0 3 ALT2 IN>;
-                                               keyin2 = <&PIO0 4 ALT2 IN>;
-                                               keyin3 = <&PIO2 6 ALT2 IN>;
-
-                                               keyout0 = <&PIO1 6 ALT2 OUT>;
-                                               keyout1 = <&PIO1 7 ALT2 OUT>;
-                                               keyout2 = <&PIO0 6 ALT2 OUT>;
-                                               keyout3 = <&PIO2 7 ALT2 OUT>;
+                                               keyin0 = <&pio0 2 ALT2 IN>;
+                                               keyin1 = <&pio0 3 ALT2 IN>;
+                                               keyin2 = <&pio0 4 ALT2 IN>;
+                                               keyin3 = <&pio2 6 ALT2 IN>;
+
+                                               keyout0 = <&pio1 6 ALT2 OUT>;
+                                               keyout1 = <&pio1 7 ALT2 OUT>;
+                                               keyout2 = <&pio0 6 ALT2 OUT>;
+                                               keyout3 = <&pio2 7 ALT2 OUT>;
                                        };
                                };
                        };
@@ -121,8 +121,8 @@
                        sbc_i2c0 {
                                pinctrl_sbc_i2c0_default: sbc_i2c0-default {
                                        st,pins {
-                                               sda = <&PIO4 6 ALT1 BIDIR>;
-                                               scl = <&PIO4 5 ALT1 BIDIR>;
+                                               sda = <&pio4 6 ALT1 BIDIR>;
+                                               scl = <&pio4 5 ALT1 BIDIR>;
                                        };
                                };
                        };
@@ -130,8 +130,8 @@
                        sbc_i2c1 {
                                pinctrl_sbc_i2c1_default: sbc_i2c1-default {
                                        st,pins {
-                                               sda = <&PIO3 2 ALT2 BIDIR>;
-                                               scl = <&PIO3 1 ALT2 BIDIR>;
+                                               sda = <&pio3 2 ALT2 BIDIR>;
+                                               scl = <&pio3 1 ALT2 BIDIR>;
                                        };
                                };
                        };
@@ -139,7 +139,7 @@
                        rc{
                                pinctrl_ir: ir0 {
                                        st,pins {
-                                               ir = <&PIO4 0 ALT2 IN>;
+                                               ir = <&pio4 0 ALT2 IN>;
                                        };
                                };
                        };
@@ -147,49 +147,49 @@
                        gmac1 {
                                pinctrl_mii1: mii1 {
                                                st,pins {
-                                                txd0   = <&PIO0 0 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
-                                                txd1   = <&PIO0 1 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
-                                                txd2   = <&PIO0 2 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
-                                                txd3   = <&PIO0 3 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
-                                                txer   = <&PIO0 4 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
-                                                txen   = <&PIO0 5 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
-                                                txclk  = <&PIO0 6 ALT1 IN   NICLK      0       CLK_A>;
-                                                col    = <&PIO0 7 ALT1 IN   BYPASS     1000>;
-                                                mdio   = <&PIO1 0 ALT1 OUT  BYPASS     0>;
-                                                mdc    = <&PIO1 1 ALT1 OUT  NICLK      0       CLK_A>;
-                                                crs    = <&PIO1 2 ALT1 IN   BYPASS     1000>;
-                                                mdint  = <&PIO1 3 ALT1 IN   BYPASS     0>;
-                                                rxd0   = <&PIO1 4 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
-                                                rxd1   = <&PIO1 5 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
-                                                rxd2   = <&PIO1 6 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
-                                                rxd3   = <&PIO1 7 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
-                                                rxdv   = <&PIO2 0 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
-                                                rx_er  = <&PIO2 1 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
-                                                rxclk  = <&PIO2 2 ALT1 IN   NICLK      0       CLK_A>;
-                                                phyclk = <&PIO2 3 ALT1 IN   NICLK      1000    CLK_A>;
+                                                txd0   = <&pio0 0 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
+                                                txd1   = <&pio0 1 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
+                                                txd2   = <&pio0 2 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
+                                                txd3   = <&pio0 3 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
+                                                txer   = <&pio0 4 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
+                                                txen   = <&pio0 5 ALT1 OUT  SE_NICLK_IO        0       CLK_A>;
+                                                txclk  = <&pio0 6 ALT1 IN   NICLK      0       CLK_A>;
+                                                col    = <&pio0 7 ALT1 IN   BYPASS     1000>;
+                                                mdio   = <&pio1 0 ALT1 OUT  BYPASS     0>;
+                                                mdc    = <&pio1 1 ALT1 OUT  NICLK      0       CLK_A>;
+                                                crs    = <&pio1 2 ALT1 IN   BYPASS     1000>;
+                                                mdint  = <&pio1 3 ALT1 IN   BYPASS     0>;
+                                                rxd0   = <&pio1 4 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
+                                                rxd1   = <&pio1 5 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
+                                                rxd2   = <&pio1 6 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
+                                                rxd3   = <&pio1 7 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
+                                                rxdv   = <&pio2 0 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
+                                                rx_er  = <&pio2 1 ALT1 IN   SE_NICLK_IO        0       CLK_A>;
+                                                rxclk  = <&pio2 2 ALT1 IN   NICLK      0       CLK_A>;
+                                                phyclk = <&pio2 3 ALT1 IN   NICLK      1000    CLK_A>;
                                        };
                                };
 
                                pinctrl_rgmii1: rgmii1-0 {
                                        st,pins {
-                                                txd0 =  <&PIO0 0 ALT1 OUT DE_IO        1000    CLK_A>;
-                                                txd1 =  <&PIO0 1 ALT1 OUT DE_IO        1000    CLK_A>;
-                                                txd2 =  <&PIO0 2 ALT1 OUT DE_IO        1000    CLK_A>;
-                                                txd3 =  <&PIO0 3 ALT1 OUT DE_IO        1000    CLK_A>;
-                                                txen =  <&PIO0 5 ALT1 OUT DE_IO        0       CLK_A>;
-                                                txclk = <&PIO0 6 ALT1 IN       NICLK   0       CLK_A>;
-                                                mdio =  <&PIO1 0 ALT1 OUT      BYPASS  0>;
-                                                mdc =   <&PIO1 1 ALT1 OUT      NICLK   0       CLK_A>;
-                                                rxd0 =  <&PIO1 4 ALT1 IN DE_IO 0       CLK_A>;
-                                                rxd1 =  <&PIO1 5 ALT1 IN DE_IO 0       CLK_A>;
-                                                rxd2 =  <&PIO1 6 ALT1 IN DE_IO 0       CLK_A>;
-                                                rxd3 =  <&PIO1 7 ALT1 IN DE_IO 0       CLK_A>;
-
-                                                rxdv =   <&PIO2 0 ALT1 IN DE_IO        500     CLK_A>;
-                                                rxclk =  <&PIO2 2 ALT1 IN      NICLK   0       CLK_A>;
-                                                phyclk = <&PIO2 3 ALT4 OUT     NICLK   0       CLK_B>;
-
-                                                clk125= <&PIO3 7 ALT4 IN       NICLK   0       CLK_A>;
+                                                txd0 =  <&pio0 0 ALT1 OUT DE_IO        1000    CLK_A>;
+                                                txd1 =  <&pio0 1 ALT1 OUT DE_IO        1000    CLK_A>;
+                                                txd2 =  <&pio0 2 ALT1 OUT DE_IO        1000    CLK_A>;
+                                                txd3 =  <&pio0 3 ALT1 OUT DE_IO        1000    CLK_A>;
+                                                txen =  <&pio0 5 ALT1 OUT DE_IO        0       CLK_A>;
+                                                txclk = <&pio0 6 ALT1 IN       NICLK   0       CLK_A>;
+                                                mdio =  <&pio1 0 ALT1 OUT      BYPASS  0>;
+                                                mdc =   <&pio1 1 ALT1 OUT      NICLK   0       CLK_A>;
+                                                rxd0 =  <&pio1 4 ALT1 IN DE_IO 0       CLK_A>;
+                                                rxd1 =  <&pio1 5 ALT1 IN DE_IO 0       CLK_A>;
+                                                rxd2 =  <&pio1 6 ALT1 IN DE_IO 0       CLK_A>;
+                                                rxd3 =  <&pio1 7 ALT1 IN DE_IO 0       CLK_A>;
+
+                                                rxdv =   <&pio2 0 ALT1 IN DE_IO        500     CLK_A>;
+                                                rxclk =  <&pio2 2 ALT1 IN      NICLK   0       CLK_A>;
+                                                phyclk = <&pio2 3 ALT4 OUT     NICLK   0       CLK_B>;
+
+                                                clk125= <&pio3 7 ALT4 IN       NICLK   0       CLK_A>;
                                        };
                                };
                        };
@@ -206,7 +206,7 @@
                        interrupt-names = "irqmux";
                        ranges          = <0 0xfee00000 0x8000>;
 
-                       PIO5: gpio@fee00000 {
+                       pio5: gpio@fee00000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -214,7 +214,7 @@
                                reg             = <0 0x100>;
                                st,bank-name    = "PIO5";
                        };
-                       PIO6: gpio@fee01000 {
+                       pio6: gpio@fee01000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -222,7 +222,7 @@
                                reg             = <0x1000 0x100>;
                                st,bank-name    = "PIO6";
                        };
-                       PIO7: gpio@fee02000 {
+                       pio7: gpio@fee02000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -230,7 +230,7 @@
                                reg             = <0x2000 0x100>;
                                st,bank-name    = "PIO7";
                        };
-                       PIO8: gpio@fee03000 {
+                       pio8: gpio@fee03000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -238,7 +238,7 @@
                                reg             = <0x3000 0x100>;
                                st,bank-name    = "PIO8";
                        };
-                       PIO9: gpio@fee04000 {
+                       pio9: gpio@fee04000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -246,7 +246,7 @@
                                reg             = <0x4000 0x100>;
                                st,bank-name    = "PIO9";
                        };
-                       PIO10: gpio@fee05000 {
+                       pio10: gpio@fee05000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -254,7 +254,7 @@
                                reg             = <0x5000 0x100>;
                                st,bank-name    = "PIO10";
                        };
-                       PIO11: gpio@fee06000 {
+                       pio11: gpio@fee06000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -262,7 +262,7 @@
                                reg             = <0x6000 0x100>;
                                st,bank-name    = "PIO11";
                        };
-                       PIO12: gpio@fee07000 {
+                       pio12: gpio@fee07000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -274,8 +274,8 @@
                        i2c0 {
                                pinctrl_i2c0_default: i2c0-default {
                                        st,pins {
-                                               sda = <&PIO9 3 ALT1 BIDIR>;
-                                               scl = <&PIO9 2 ALT1 BIDIR>;
+                                               sda = <&pio9 3 ALT1 BIDIR>;
+                                               scl = <&pio9 2 ALT1 BIDIR>;
                                        };
                                };
                        };
@@ -283,8 +283,8 @@
                        i2c1 {
                                pinctrl_i2c1_default: i2c1-default {
                                        st,pins {
-                                               sda = <&PIO12 1 ALT1 BIDIR>;
-                                               scl = <&PIO12 0 ALT1 BIDIR>;
+                                               sda = <&pio12 1 ALT1 BIDIR>;
+                                               scl = <&pio12 0 ALT1 BIDIR>;
                                        };
                                };
                        };
@@ -301,7 +301,7 @@
                        interrupt-names = "irqmux";
                        ranges          = <0 0xfe820000 0x8000>;
 
-                       PIO13: gpio@fe820000 {
+                       pio13: gpio@fe820000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -309,7 +309,7 @@
                                reg             = <0 0x100>;
                                st,bank-name    = "PIO13";
                        };
-                       PIO14: gpio@fe821000 {
+                       pio14: gpio@fe821000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -317,7 +317,7 @@
                                reg             = <0x1000 0x100>;
                                st,bank-name    = "PIO14";
                        };
-                       PIO15: gpio@fe822000 {
+                       pio15: gpio@fe822000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -325,7 +325,7 @@
                                reg             = <0x2000 0x100>;
                                st,bank-name    = "PIO15";
                        };
-                       PIO16: gpio@fe823000 {
+                       pio16: gpio@fe823000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -333,7 +333,7 @@
                                reg             = <0x3000 0x100>;
                                st,bank-name    = "PIO16";
                        };
-                       PIO17: gpio@fe824000 {
+                       pio17: gpio@fe824000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -341,7 +341,7 @@
                                reg             = <0x4000 0x100>;
                                st,bank-name    = "PIO17";
                        };
-                       PIO18: gpio@fe825000 {
+                       pio18: gpio@fe825000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -353,8 +353,8 @@
                        serial2 {
                                pinctrl_serial2: serial2-0 {
                                        st,pins {
-                                               tx      = <&PIO17 4 ALT2 OUT>;
-                                               rx      = <&PIO17 5 ALT2 IN>;
+                                               tx      = <&pio17 4 ALT2 OUT>;
+                                               rx      = <&pio17 5 ALT2 IN>;
                                        };
                                };
                        };
@@ -362,68 +362,68 @@
                        gmac0{
                                pinctrl_mii0: mii0 {
                                        st,pins {
-                                        mdint =        <&PIO13 6 ALT2  IN      BYPASS          0>;
-                                        txen =         <&PIO13 7 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
-
-                                        txd0 =         <&PIO14 0 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
-                                        txd1 =         <&PIO14 1 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
-                                        txd2 =         <&PIO14 2 ALT2  OUT     SE_NICLK_IO     0       CLK_B>;
-                                        txd3 =         <&PIO14 3 ALT2  OUT     SE_NICLK_IO     0       CLK_B>;
-
-                                        txclk =        <&PIO15 0 ALT2  IN      NICLK           0       CLK_A>;
-                                        txer =         <&PIO15 1 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
-                                        crs =          <&PIO15 2 ALT2  IN      BYPASS          1000>;
-                                        col =          <&PIO15 3 ALT2  IN      BYPASS          1000>;
-                                        mdio  =        <&PIO15 4 ALT2  OUT     BYPASS  3000>;
-                                        mdc   =        <&PIO15 5 ALT2  OUT     NICLK   0       CLK_B>;
-
-                                        rxd0 =         <&PIO16 0 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
-                                        rxd1 =         <&PIO16 1 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
-                                        rxd2 =         <&PIO16 2 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
-                                        rxd3 =         <&PIO16 3 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
-                                        rxdv =         <&PIO15 6 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
-                                        rx_er =        <&PIO15 7 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
-                                        rxclk =        <&PIO17 0 ALT2  IN      NICLK           0       CLK_A>;
-                                        phyclk =       <&PIO13 5 ALT2  OUT     NICLK   1000    CLK_A>;
+                                        mdint =        <&pio13 6 ALT2  IN      BYPASS          0>;
+                                        txen =         <&pio13 7 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
+
+                                        txd0 =         <&pio14 0 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
+                                        txd1 =         <&pio14 1 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
+                                        txd2 =         <&pio14 2 ALT2  OUT     SE_NICLK_IO     0       CLK_B>;
+                                        txd3 =         <&pio14 3 ALT2  OUT     SE_NICLK_IO     0       CLK_B>;
+
+                                        txclk =        <&pio15 0 ALT2  IN      NICLK           0       CLK_A>;
+                                        txer =         <&pio15 1 ALT2  OUT     SE_NICLK_IO     0       CLK_A>;
+                                        crs =          <&pio15 2 ALT2  IN      BYPASS          1000>;
+                                        col =          <&pio15 3 ALT2  IN      BYPASS          1000>;
+                                        mdio  =        <&pio15 4 ALT2  OUT     BYPASS  3000>;
+                                        mdc   =        <&pio15 5 ALT2  OUT     NICLK   0       CLK_B>;
+
+                                        rxd0 =         <&pio16 0 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
+                                        rxd1 =         <&pio16 1 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
+                                        rxd2 =         <&pio16 2 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
+                                        rxd3 =         <&pio16 3 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
+                                        rxdv =         <&pio15 6 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
+                                        rx_er =        <&pio15 7 ALT2  IN      SE_NICLK_IO     0       CLK_A>;
+                                        rxclk =        <&pio17 0 ALT2  IN      NICLK           0       CLK_A>;
+                                        phyclk =       <&pio13 5 ALT2  OUT     NICLK   1000    CLK_A>;
 
                                        };
                                };
 
                        pinctrl_gmii0: gmii0 {
                                st,pins {
-                                        mdint =        <&PIO13 6       ALT2 IN         BYPASS  0>;
-                                        mdio  =        <&PIO15 4       ALT2 OUT        BYPASS  3000>;
-                                        mdc   =        <&PIO15 5       ALT2 OUT        NICLK   0       CLK_B>;
-                                        txen =         <&PIO13 7       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
-
-                                        txd0 =         <&PIO14 0       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
-                                        txd1 =         <&PIO14 1       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
-                                        txd2 =         <&PIO14 2       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
-                                        txd3 =         <&PIO14 3       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
-                                        txd4 =         <&PIO14 4       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
-                                        txd5 =         <&PIO14 5       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
-                                        txd6 =         <&PIO14 6       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
-                                        txd7 =         <&PIO14 7       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
-
-                                        txclk =        <&PIO15 0       ALT2 IN         NICLK   0       CLK_A>;
-                                        txer =         <&PIO15 1       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
-                                        crs =          <&PIO15 2       ALT2 IN         BYPASS  1000>;
-                                        col =          <&PIO15 3       ALT2 IN         BYPASS  1000>;
-                                        rxdv =         <&PIO15 6       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
-                                        rx_er =        <&PIO15 7       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
-
-                                        rxd0 =         <&PIO16 0       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
-                                        rxd1 =         <&PIO16 1       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
-                                        rxd2 =         <&PIO16 2       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
-                                        rxd3 =         <&PIO16 3       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
-                                        rxd4 =         <&PIO16 4       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
-                                        rxd5 =         <&PIO16 5       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
-                                        rxd6 =         <&PIO16 6       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
-                                        rxd7 =         <&PIO16 7       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
-
-                                        rxclk =        <&PIO17 0       ALT2 IN NICLK   0       CLK_A>;
-                                        clk125 =       <&PIO17 6       ALT1 IN NICLK   0       CLK_A>;
-                                         phyclk =       <&PIO13 5       ALT4 OUT NICLK   0       CLK_B>;
+                                        mdint =        <&pio13 6       ALT2 IN         BYPASS  0>;
+                                        mdio  =        <&pio15 4       ALT2 OUT        BYPASS  3000>;
+                                        mdc   =        <&pio15 5       ALT2 OUT        NICLK   0       CLK_B>;
+                                        txen =         <&pio13 7       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
+
+                                        txd0 =         <&pio14 0       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
+                                        txd1 =         <&pio14 1       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
+                                        txd2 =         <&pio14 2       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
+                                        txd3 =         <&pio14 3       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
+                                        txd4 =         <&pio14 4       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
+                                        txd5 =         <&pio14 5       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
+                                        txd6 =         <&pio14 6       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
+                                        txd7 =         <&pio14 7       ALT2 OUT        SE_NICLK_IO     3000    CLK_B>;
+
+                                        txclk =        <&pio15 0       ALT2 IN         NICLK   0       CLK_A>;
+                                        txer =         <&pio15 1       ALT2 OUT        SE_NICLK_IO     3000    CLK_A>;
+                                        crs =          <&pio15 2       ALT2 IN         BYPASS  1000>;
+                                        col =          <&pio15 3       ALT2 IN         BYPASS  1000>;
+                                        rxdv =         <&pio15 6       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
+                                        rx_er =        <&pio15 7       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
+
+                                        rxd0 =         <&pio16 0       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
+                                        rxd1 =         <&pio16 1       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
+                                        rxd2 =         <&pio16 2       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
+                                        rxd3 =         <&pio16 3       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
+                                        rxd4 =         <&pio16 4       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
+                                        rxd5 =         <&pio16 5       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
+                                        rxd6 =         <&pio16 6       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
+                                        rxd7 =         <&pio16 7       ALT2 IN         SE_NICLK_IO     1500    CLK_A>;
+
+                                        rxclk =        <&pio17 0       ALT2 IN NICLK   0       CLK_A>;
+                                        clk125 =       <&pio17 6       ALT1 IN NICLK   0       CLK_A>;
+                                         phyclk =       <&pio13 5       ALT4 OUT NICLK   0       CLK_B>;
 
 
                                        };
@@ -442,7 +442,7 @@
                        interrupt-names = "irqmux";
                        ranges          = <0 0xfd6b0000 0x3000>;
 
-                       PIO100: gpio@fd6b0000 {
+                       pio100: gpio@fd6b0000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -450,7 +450,7 @@
                                reg             = <0 0x100>;
                                st,bank-name    = "PIO100";
                        };
-                       PIO101: gpio@fd6b1000 {
+                       pio101: gpio@fd6b1000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -458,7 +458,7 @@
                                reg             = <0x1000 0x100>;
                                st,bank-name    = "PIO101";
                        };
-                       PIO102: gpio@fd6b2000 {
+                       pio102: gpio@fd6b2000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -479,7 +479,7 @@
                        interrupt-names = "irqmux";
                        ranges          = <0 0xfd330000 0x5000>;
 
-                       PIO103: gpio@fd330000 {
+                       pio103: gpio@fd330000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -487,7 +487,7 @@
                                reg             = <0 0x100>;
                                st,bank-name    = "PIO103";
                        };
-                       PIO104: gpio@fd331000 {
+                       pio104: gpio@fd331000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -495,7 +495,7 @@
                                reg             = <0x1000 0x100>;
                                st,bank-name    = "PIO104";
                        };
-                       PIO105: gpio@fd332000 {
+                       pio105: gpio@fd332000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -503,7 +503,7 @@
                                reg             = <0x2000 0x100>;
                                st,bank-name    = "PIO105";
                        };
-                       PIO106: gpio@fd333000 {
+                       pio106: gpio@fd333000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -511,7 +511,7 @@
                                reg             = <0x3000 0x100>;
                                st,bank-name    = "PIO106";
                        };
-                       PIO107: gpio@fd334000 {
+                       pio107: gpio@fd334000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;

diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts
index ba0fa2c..d72e5c7 100644 (file)
--- a/arch/arm/boot/dts/stih416-b2020e.dts
+++ b/arch/arm/boot/dts/stih416-b2020e.dts
@@ -19,17 +19,17 @@
                        red {
                                #gpio-cells             = <1>;
                                label                   = "Front Panel LED";
-                               gpios                   = <&PIO4 1>;
+                               gpios                   = <&pio4 1>;
                                linux,default-trigger   = "heartbeat";
                        };
                        green {
-                               gpios                   = <&PIO1 3>;
+                               gpios                   = <&pio1 3>;
                                default-state           = "off";
                        };
                };
 
                ethernet1: dwmac@fef08000 {
-                       snps,reset-gpio = <&PIO0 7>;
+                       snps,reset-gpio = <&pio0 7>;
                };
        };
 };

diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi
index ee6c119..787c2ee 100644 (file)
--- a/arch/arm/boot/dts/stih416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi
@@ -12,36 +12,36 @@
 / {
 
        aliases {
-               gpio0   = &PIO0;
-               gpio1   = &PIO1;
-               gpio2   = &PIO2;
-               gpio3   = &PIO3;
-               gpio4   = &PIO4;
-               gpio5   = &PIO40;
-               gpio6   = &PIO5;
-               gpio7   = &PIO6;
-               gpio8   = &PIO7;
-               gpio9   = &PIO8;
-               gpio10  = &PIO9;
-               gpio11  = &PIO10;
-               gpio12  = &PIO11;
-               gpio13  = &PIO12;
-               gpio14  = &PIO30;
-               gpio15  = &PIO31;
-               gpio16  = &PIO13;
-               gpio17  = &PIO14;
-               gpio18  = &PIO15;
-               gpio19  = &PIO16;
-               gpio20  = &PIO17;
-               gpio21  = &PIO18;
-               gpio22  = &PIO100;
-               gpio23  = &PIO101;
-               gpio24  = &PIO102;
-               gpio25  = &PIO103;
-               gpio26  = &PIO104;
-               gpio27  = &PIO105;
-               gpio28  = &PIO106;
-               gpio29  = &PIO107;
+               gpio0   = &pio0;
+               gpio1   = &pio1;
+               gpio2   = &pio2;
+               gpio3   = &pio3;
+               gpio4   = &pio4;
+               gpio5   = &pio40;
+               gpio6   = &pio5;
+               gpio7   = &pio6;
+               gpio8   = &pio7;
+               gpio9   = &pio8;
+               gpio10  = &pio9;
+               gpio11  = &pio10;
+               gpio12  = &pio11;
+               gpio13  = &pio12;
+               gpio14  = &pio30;
+               gpio15  = &pio31;
+               gpio16  = &pio13;
+               gpio17  = &pio14;
+               gpio18  = &pio15;
+               gpio19  = &pio16;
+               gpio20  = &pio17;
+               gpio21  = &pio18;
+               gpio22  = &pio100;
+               gpio23  = &pio101;
+               gpio24  = &pio102;
+               gpio25  = &pio103;
+               gpio26  = &pio104;
+               gpio27  = &pio105;
+               gpio28  = &pio106;
+               gpio29  = &pio107;
        };
 
        soc {
@@ -56,7 +56,7 @@
                        interrupt-names = "irqmux";
                        ranges          = <0 0xfe610000 0x6000>;
 
-                       PIO0: gpio@fe610000 {
+                       pio0: gpio@fe610000 {
                                gpio-controller;
                                #gpio-cells = <1>;
                                interrupt-controller;
@@ -64,7 +64,7 @@
                                reg             = <0 0x100>;
                                st,bank-name    = "PIO0";
                        };
-                       PIO1: gpio@fe611000 {
+                       pio1: gpio@fe611000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -72,7 +72,7 @@
                                reg             = <0x1000 0x100>;
                                st,bank-name    = "PIO1";
                        };
-                       PIO2: gpio@fe612000 {
+                       pio2: gpio@fe612000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -80,7 +80,7 @@
                                reg             = <0x2000 0x100>;
                                st,bank-name    = "PIO2";
                        };
-                       PIO3: gpio@fe613000 {
+                       pio3: gpio@fe613000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -88,7 +88,7 @@
                                reg             = <0x3000 0x100>;
                                st,bank-name    = "PIO3";
                        };
-                       PIO4: gpio@fe614000 {
+                       pio4: gpio@fe614000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -96,7 +96,7 @@
                                reg             = <0x4000 0x100>;
                                st,bank-name    = "PIO4";
                        };
-                       PIO40: gpio@fe615000 {
+                       pio40: gpio@fe615000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -109,15 +109,15 @@
                        rc{
                                pinctrl_ir: ir0 {
                                        st,pins {
-                                               ir = <&PIO4 0 ALT2 IN>;
+                                               ir = <&pio4 0 ALT2 IN>;
                                        };
                                };
                        };
                        sbc_serial1 {
                                pinctrl_sbc_serial1: sbc_serial1 {
                                        st,pins {
-                                               tx      = <&PIO2 6 ALT3 OUT>;
-                                               rx      = <&PIO2 7 ALT3 IN>;
+                                               tx      = <&pio2 6 ALT3 OUT>;
+                                               rx      = <&pio2 7 ALT3 IN>;
                                        };
                                };
                        };
@@ -125,15 +125,15 @@
                        keyscan {
                                pinctrl_keyscan: keyscan {
                                        st,pins {
-                                               keyin0 = <&PIO0 2 ALT2 IN>;
-                                               keyin1 = <&PIO0 3 ALT2 IN>;
-                                               keyin2 = <&PIO0 4 ALT2 IN>;
-                                               keyin3 = <&PIO2 6 ALT2 IN>;
-
-                                               keyout0 = <&PIO1 6 ALT2 OUT>;
-                                               keyout1 = <&PIO1 7 ALT2 OUT>;
-                                               keyout2 = <&PIO0 6 ALT2 OUT>;
-                                               keyout3 = <&PIO2 7 ALT2 OUT>;
+                                               keyin0 = <&pio0 2 ALT2 IN>;
+                                               keyin1 = <&pio0 3 ALT2 IN>;
+                                               keyin2 = <&pio0 4 ALT2 IN>;
+                                               keyin3 = <&pio2 6 ALT2 IN>;
+
+                                               keyout0 = <&pio1 6 ALT2 OUT>;
+                                               keyout1 = <&pio1 7 ALT2 OUT>;
+                                               keyout2 = <&pio0 6 ALT2 OUT>;
+                                               keyout3 = <&pio2 7 ALT2 OUT>;
                                        };
                                };
                        };
@@ -141,8 +141,8 @@
                        sbc_i2c0 {
                                pinctrl_sbc_i2c0_default: sbc_i2c0-default {
                                        st,pins {
-                                               sda = <&PIO4 6 ALT1 BIDIR>;
-                                               scl = <&PIO4 5 ALT1 BIDIR>;
+                                               sda = <&pio4 6 ALT1 BIDIR>;
+                                               scl = <&pio4 5 ALT1 BIDIR>;
                                        };
                                };
                        };
@@ -150,8 +150,8 @@
                        sbc_i2c1 {
                                pinctrl_sbc_i2c1_default: sbc_i2c1-default {
                                        st,pins {
-                                               sda = <&PIO3 2 ALT2 BIDIR>;
-                                               scl = <&PIO3 1 ALT2 BIDIR>;
+                                               sda = <&pio3 2 ALT2 BIDIR>;
+                                               scl = <&pio3 1 ALT2 BIDIR>;
                                        };
                                };
                        };
@@ -159,51 +159,51 @@
                        gmac1 {
                                pinctrl_mii1: mii1 {
                                        st,pins {
-                                               txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-                                               txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-                                               txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-                                               txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-                                               txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-                                               txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
-                                               txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
-                                               col =   <&PIO0 7 ALT1 IN BYPASS 1000>;
-
-                                               mdio =  <&PIO1 0 ALT1 OUT BYPASS 1500>;
-                                               mdc =   <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
-                                               crs =   <&PIO1 2 ALT1 IN BYPASS 1000>;
-                                               mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
-                                               rxd0 =  <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-                                               rxd1 =  <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-                                               rxd2 =  <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-                                               rxd3 =  <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-
-                                               rxdv =  <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-                                               rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-                                               rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
-                                               phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
+                                               txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+                                               txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+                                               txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+                                               txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+                                               txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+                                               txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+                                               txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+                                               col =   <&pio0 7 ALT1 IN BYPASS 1000>;
+
+                                               mdio =  <&pio1 0 ALT1 OUT BYPASS 1500>;
+                                               mdc =   <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+                                               crs =   <&pio1 2 ALT1 IN BYPASS 1000>;
+                                               mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+                                               rxd0 =  <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               rxd1 =  <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               rxd2 =  <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               rxd3 =  <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+                                               rxdv =  <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+                                               rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+                                               phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
                                        };
                                };
                                pinctrl_rgmii1: rgmii1-0 {
                                        st,pins {
-                                               txd0 =  <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>;
-                                               txd1 =  <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>;
-                                               txd2 =  <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>;
-                                               txd3 =  <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>;
-                                               txen =  <&PIO0 5 ALT1 OUT DE_IO 0   CLK_A>;
-                                               txclk = <&PIO0 6 ALT1 IN  NICLK 0   CLK_A>;
-
-                                               mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
-                                               mdc  = <&PIO1 1 ALT1 OUT NICLK  0 CLK_A>;
-                                               rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>;
-                                               rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>;
-                                               rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>;
-                                               rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>;
-
-                                               rxdv   = <&PIO2 0 ALT1 IN  DE_IO 500 CLK_A>;
-                                               rxclk  = <&PIO2 2 ALT1 IN  NICLK 0   CLK_A>;
-                                               phyclk = <&PIO2 3 ALT4 OUT NICLK 0   CLK_B>;
-
-                                               clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+                                               txd0 =  <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
+                                               txd1 =  <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
+                                               txd2 =  <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
+                                               txd3 =  <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
+                                               txen =  <&pio0 5 ALT1 OUT DE_IO 0   CLK_A>;
+                                               txclk = <&pio0 6 ALT1 IN  NICLK 0   CLK_A>;
+
+                                               mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+                                               mdc  = <&pio1 1 ALT1 OUT NICLK  0 CLK_A>;
+                                               rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
+                                               rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
+                                               rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
+                                               rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
+
+                                               rxdv   = <&pio2 0 ALT1 IN  DE_IO 500 CLK_A>;
+                                               rxclk  = <&pio2 2 ALT1 IN  NICLK 0   CLK_A>;
+                                               phyclk = <&pio2 3 ALT4 OUT NICLK 0   CLK_B>;
+
+                                               clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
                                        };
                                };
                        };
@@ -220,7 +220,7 @@
                        interrupt-names = "irqmux";
                        ranges          = <0 0xfee00000 0x10000>;
 
-                       PIO5: gpio@fee00000 {
+                       pio5: gpio@fee00000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -228,7 +228,7 @@
                                reg             = <0 0x100>;
                                st,bank-name    = "PIO5";
                        };
-                       PIO6: gpio@fee01000 {
+                       pio6: gpio@fee01000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -236,7 +236,7 @@
                                reg             = <0x1000 0x100>;
                                st,bank-name    = "PIO6";
                        };
-                       PIO7: gpio@fee02000 {
+                       pio7: gpio@fee02000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -244,7 +244,7 @@
                                reg             = <0x2000 0x100>;
                                st,bank-name    = "PIO7";
                        };
-                       PIO8: gpio@fee03000 {
+                       pio8: gpio@fee03000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -252,7 +252,7 @@
                                reg             = <0x3000 0x100>;
                                st,bank-name    = "PIO8";
                        };
-                       PIO9: gpio@fee04000 {
+                       pio9: gpio@fee04000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -260,7 +260,7 @@
                                reg             = <0x4000 0x100>;
                                st,bank-name    = "PIO9";
                        };
-                       PIO10: gpio@fee05000 {
+                       pio10: gpio@fee05000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -268,7 +268,7 @@
                                reg             = <0x5000 0x100>;
                                st,bank-name    = "PIO10";
                        };
-                       PIO11: gpio@fee06000 {
+                       pio11: gpio@fee06000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -276,7 +276,7 @@
                                reg             = <0x6000 0x100>;
                                st,bank-name    = "PIO11";
                        };
-                       PIO12: gpio@fee07000 {
+                       pio12: gpio@fee07000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -284,7 +284,7 @@
                                reg             = <0x7000 0x100>;
                                st,bank-name    = "PIO12";
                        };
-                       PIO30: gpio@fee08000 {
+                       pio30: gpio@fee08000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -292,7 +292,7 @@
                                reg             = <0x8000 0x100>;
                                st,bank-name    = "PIO30";
                        };
-                       PIO31: gpio@fee09000 {
+                       pio31: gpio@fee09000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -304,7 +304,7 @@
                        serial2-oe {
                                pinctrl_serial2_oe: serial2-1 {
                                        st,pins {
-                                               output-enable   = <&PIO11 3 ALT2 OUT>;
+                                               output-enable   = <&pio11 3 ALT2 OUT>;
                                        };
                                };
                        };
@@ -312,8 +312,8 @@
                        i2c0 {
                                pinctrl_i2c0_default: i2c0-default {
                                        st,pins {
-                                               sda = <&PIO9 3 ALT1 BIDIR>;
-                                               scl = <&PIO9 2 ALT1 BIDIR>;
+                                               sda = <&pio9 3 ALT1 BIDIR>;
+                                               scl = <&pio9 2 ALT1 BIDIR>;
                                        };
                                };
                        };
@@ -321,8 +321,8 @@
                        i2c1 {
                                pinctrl_i2c1_default: i2c1-default {
                                        st,pins {
-                                               sda = <&PIO12 1 ALT1 BIDIR>;
-                                               scl = <&PIO12 0 ALT1 BIDIR>;
+                                               sda = <&pio12 1 ALT1 BIDIR>;
+                                               scl = <&pio12 0 ALT1 BIDIR>;
                                        };
                                };
                        };
@@ -330,12 +330,12 @@
                        fsm {
                                pinctrl_fsm: fsm {
                                        st,pins {
-                                               spi-fsm-clk  = <&PIO12 2 ALT1 OUT>;
-                                               spi-fsm-cs   = <&PIO12 3 ALT1 OUT>;
-                                               spi-fsm-mosi = <&PIO12 4 ALT1 OUT>;
-                                               spi-fsm-miso = <&PIO12 5 ALT1 IN>;
-                                               spi-fsm-hol  = <&PIO12 6 ALT1 OUT>;
-                                               spi-fsm-wp   = <&PIO12 7 ALT1 OUT>;
+                                               spi-fsm-clk  = <&pio12 2 ALT1 OUT>;
+                                               spi-fsm-cs   = <&pio12 3 ALT1 OUT>;
+                                               spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
+                                               spi-fsm-miso = <&pio12 5 ALT1 IN>;
+                                               spi-fsm-hol  = <&pio12 6 ALT1 OUT>;
+                                               spi-fsm-wp   = <&pio12 7 ALT1 OUT>;
                                        };
                                };
                        };
@@ -352,7 +352,7 @@
                        interrupt-names = "irqmux";
                        ranges          = <0 0xfe820000 0x6000>;
 
-                       PIO13: gpio@fe820000 {
+                       pio13: gpio@fe820000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -360,7 +360,7 @@
                                reg             = <0 0x100>;
                                st,bank-name    = "PIO13";
                        };
-                       PIO14: gpio@fe821000 {
+                       pio14: gpio@fe821000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -368,7 +368,7 @@
                                reg             = <0x1000 0x100>;
                                st,bank-name    = "PIO14";
                        };
-                       PIO15: gpio@fe822000 {
+                       pio15: gpio@fe822000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -376,7 +376,7 @@
                                reg             = <0x2000 0x100>;
                                st,bank-name    = "PIO15";
                        };
-                       PIO16: gpio@fe823000 {
+                       pio16: gpio@fe823000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -384,7 +384,7 @@
                                reg             = <0x3000 0x100>;
                                st,bank-name    = "PIO16";
                        };
-                       PIO17: gpio@fe824000 {
+                       pio17: gpio@fe824000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -392,7 +392,7 @@
                                reg             = <0x4000 0x100>;
                                st,bank-name    = "PIO17";
                        };
-                       PIO18: gpio@fe825000 {
+                       pio18: gpio@fe825000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -405,8 +405,8 @@
                        serial2 {
                                pinctrl_serial2: serial2-0 {
                                        st,pins {
-                                               tx      = <&PIO17 4 ALT2 OUT>;
-                                               rx      = <&PIO17 5 ALT2 IN>;
+                                               tx      = <&pio17 4 ALT2 OUT>;
+                                               rx      = <&pio17 5 ALT2 IN>;
                                        };
                                };
                        };
@@ -414,28 +414,28 @@
                        gmac0 {
                                pinctrl_mii0: mii0 {
                                        st,pins {
-                                               mdint = <&PIO13 6 ALT2 IN  BYPASS      0>;
-                                               txen =  <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-                                               txd0 =  <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-                                               txd1 =  <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-                                               txd2 =  <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-                                               txd3 =  <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-
-                                               txclk = <&PIO15 0 ALT2 IN  NICLK       0 CLK_A>;
-                                               txer =  <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-                                               crs = <&PIO15 2 ALT2 IN  BYPASS 1000>;
-                                               col = <&PIO15 3 ALT2 IN  BYPASS 1000>;
-                                               mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>;
-                                               mdc = <&PIO15 5 ALT2 OUT NICLK  0    CLK_B>;
-
-                                               rxd0 =  <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-                                               rxd1 =  <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-                                               rxd2 =  <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-                                               rxd3 =  <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-                                               rxdv =  <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-                                               rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
-                                               rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
-                                               phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>;
+                                               mdint = <&pio13 6 ALT2 IN  BYPASS      0>;
+                                               txen =  <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+                                               txd0 =  <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+                                               txd1 =  <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+                                               txd2 =  <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+                                               txd3 =  <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+
+                                               txclk = <&pio15 0 ALT2 IN  NICLK       0 CLK_A>;
+                                               txer =  <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+                                               crs = <&pio15 2 ALT2 IN  BYPASS 1000>;
+                                               col = <&pio15 3 ALT2 IN  BYPASS 1000>;
+                                               mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
+                                               mdc = <&pio15 5 ALT2 OUT NICLK  0    CLK_B>;
+
+                                               rxd0 =  <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+                                               rxd1 =  <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+                                               rxd2 =  <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+                                               rxd3 =  <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+                                               rxdv =  <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+                                               rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+                                               rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+                                               phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
                                        };
                                };
 
@@ -445,25 +445,25 @@
                                };
                                pinctrl_rgmii0: rgmii0 {
                                        st,pins {
-                                                phyclk = <&PIO13  5 ALT4 OUT NICLK 0 CLK_B>;
-                                                txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>;
-                                                txd0  = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>;
-                                                txd1  = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>;
-                                                txd2  = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>;
-                                                txd3  = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>;
-                                                txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
-
-                                                mdio = <&PIO15 4 ALT2 OUT BYPASS 0>;
-                                                mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
-
-                                                rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>;
-                                                rxd0 =<&PIO16 0 ALT2 IN DE_IO  500 CLK_A>;
-                                                rxd1 =<&PIO16 1 ALT2 IN DE_IO  500 CLK_A>;
-                                                rxd2 =<&PIO16 2 ALT2 IN DE_IO  500 CLK_A>;
-                                                rxd3  =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>;
-                                                rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
-
-                                                clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
+                                                phyclk = <&pio13  5 ALT4 OUT NICLK 0 CLK_B>;
+                                                txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
+                                                txd0  = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
+                                                txd1  = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
+                                                txd2  = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
+                                                txd3  = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
+                                                txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+
+                                                mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
+                                                mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+                                                rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
+                                                rxd0 =<&pio16 0 ALT2 IN DE_IO  500 CLK_A>;
+                                                rxd1 =<&pio16 1 ALT2 IN DE_IO  500 CLK_A>;
+                                                rxd2 =<&pio16 2 ALT2 IN DE_IO  500 CLK_A>;
+                                                rxd3  =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
+                                                rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+
+                                                clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
                                        };
                                };
                        };
@@ -480,7 +480,7 @@
                        interrupt-names = "irqmux";
                        ranges          = <0 0xfd6b0000 0x3000>;
 
-                       PIO100: gpio@fd6b0000 {
+                       pio100: gpio@fd6b0000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -488,7 +488,7 @@
                                reg             = <0 0x100>;
                                st,bank-name    = "PIO100";
                        };
-                       PIO101: gpio@fd6b1000 {
+                       pio101: gpio@fd6b1000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -496,7 +496,7 @@
                                reg             = <0x1000 0x100>;
                                st,bank-name    = "PIO101";
                        };
-                       PIO102: gpio@fd6b2000 {
+                       pio102: gpio@fd6b2000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -517,7 +517,7 @@
                        interrupt-names = "irqmux";
                        ranges                  = <0 0xfd330000 0x5000>;
 
-                       PIO103: gpio@fd330000 {
+                       pio103: gpio@fd330000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -525,7 +525,7 @@
                                reg             = <0 0x100>;
                                st,bank-name    = "PIO103";
                        };
-                       PIO104: gpio@fd331000 {
+                       pio104: gpio@fd331000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -533,7 +533,7 @@
                                reg             = <0x1000 0x100>;
                                st,bank-name    = "PIO104";
                        };
-                       PIO105: gpio@fd332000 {
+                       pio105: gpio@fd332000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -541,7 +541,7 @@
                                reg             = <0x2000 0x100>;
                                st,bank-name    = "PIO105";
                        };
-                       PIO106: gpio@fd333000 {
+                       pio106: gpio@fd333000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;
@@ -550,7 +550,7 @@
                                st,bank-name    = "PIO106";
                        };
 
-                       PIO107: gpio@fd334000 {
+                       pio107: gpio@fd334000 {
                                gpio-controller;
                                #gpio-cells     = <1>;
                                interrupt-controller;

diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi
index b3dd6ca..5f91f45 100644 (file)
--- a/arch/arm/boot/dts/stih41x-b2000.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2000.dtsi
@@ -35,7 +35,7 @@
                        fp_led {
                                #gpio-cells = <1>;
                                label   = "Front Panel LED";
-                               gpios   = <&PIO105 7>;
+                               gpios   = <&pio105 7>;
                                linux,default-trigger   = "heartbeat";
                        };
                };
@@ -55,7 +55,7 @@
                        phy-mode                = "mii";
                        pinctrl-0               = <&pinctrl_mii0>;
 
-                       snps,reset-gpio         = <&PIO106 2>;
+                       snps,reset-gpio         = <&pio106 2>;
                        snps,reset-active-low;
                        snps,reset-delays-us    = <0 10000 10000>;
                };
@@ -65,7 +65,7 @@
                        phy-mode                = "mii";
                        st,tx-retime-src        = "txclk";
 
-                       snps,reset-gpio         = <&PIO4 7>;
+                       snps,reset-gpio         = <&pio4 7>;
                        snps,reset-active-low;
                        snps,reset-delays-us    = <0 10000 10000>;
                };

diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi
index d8a8429..c0f50e9 100644 (file)
--- a/arch/arm/boot/dts/stih41x-b2020.dtsi
+++ b/arch/arm/boot/dts/stih41x-b2020.dtsi
@@ -32,11 +32,11 @@
                        red {
                                #gpio-cells = <1>;
                                label   = "Front Panel LED";
-                               gpios   = <&PIO4 1>;
+                               gpios   = <&pio4 1>;
                                linux,default-trigger   = "heartbeat";
                        };
                        green {
-                               gpios   = <&PIO4 7>;
+                               gpios   = <&pio4 7>;
                                default-state = "off";
                        };
                };
@@ -68,7 +68,7 @@
                        phy-mode                = "rgmii-id";
                        max-speed               = <1000>;
                        st,tx-retime-src        = "clk_125";
-                       snps,reset-gpio         = <&PIO3 0>;
+                       snps,reset-gpio         = <&pio3 0>;
                        snps,reset-active-low;
                        snps,reset-delays-us    = <0 10000 10000>;