ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d4b5bd6..7f069de 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -58,7 +58,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
        bcm4708-buffalo-wzr-1750dhp.dtb \
        bcm4708-netgear-r6250.dtb \
        bcm4708-netgear-r6300-v2.dtb \
-       bcm47081-asus-rt-n18u.dtb
+       bcm47081-asus-rt-n18u.dtb \
+       bcm47081-buffalo-wzr-600dhp2.dtb
 dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
        bcm21664-garnet.dtb

diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
new file mode 100644 (file)
index 0000000..bbb414f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -0,0 +1,57 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-600DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+       compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
+       model = "Buffalo WZR-600DHP2 (BCM47081)";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       memory {
+               reg = <0x00000000 0x08000000>;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <200>;
+
+               aoss {
+                       label = "AOSS";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+               };
+
+               restart {
+                       label = "Reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+               };
+
+               /* Switch device mode? */
+               mode {
+                       label = "Mode";
+                       linux,code = <KEY_SETUP>;
+                       gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+               };
+
+               eject {
+                       label = "USB eject";
+                       linux,code = <KEY_EJECTCD>;
+                       gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+               };
+       };
+};