default:
BUG();
}
- return EP_INTERVAL(interval);
+ return interval;
}
/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps.
return ep->ss_ep_comp.bmAttributes;
}
+static u32 xhci_get_endpoint_max_burst(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ /* Super speed and Plus have max burst in ep companion desc */
+ if (udev->speed >= USB_SPEED_SUPER)
+ return ep->ss_ep_comp.bMaxBurst;
+
+ if (udev->speed == USB_SPEED_HIGH &&
+ (usb_endpoint_xfer_isoc(&ep->desc) ||
+ usb_endpoint_xfer_int(&ep->desc)))
+ return (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11;
+
+ return 0;
+}
+
static u32 xhci_get_endpoint_type(struct usb_host_endpoint *ep)
{
int in;
- u32 type;
in = usb_endpoint_dir_in(&ep->desc);
- if (usb_endpoint_xfer_control(&ep->desc)) {
- type = EP_TYPE(CTRL_EP);
- } else if (usb_endpoint_xfer_bulk(&ep->desc)) {
- if (in)
- type = EP_TYPE(BULK_IN_EP);
- else
- type = EP_TYPE(BULK_OUT_EP);
- } else if (usb_endpoint_xfer_isoc(&ep->desc)) {
- if (in)
- type = EP_TYPE(ISOC_IN_EP);
- else
- type = EP_TYPE(ISOC_OUT_EP);
- } else if (usb_endpoint_xfer_int(&ep->desc)) {
- if (in)
- type = EP_TYPE(INT_IN_EP);
- else
- type = EP_TYPE(INT_OUT_EP);
- } else {
- type = 0;
- }
- return type;
+
+ if (usb_endpoint_xfer_control(&ep->desc))
+ return CTRL_EP;
+ if (usb_endpoint_xfer_bulk(&ep->desc))
+ return in ? BULK_IN_EP : BULK_OUT_EP;
+ if (usb_endpoint_xfer_isoc(&ep->desc))
+ return in ? ISOC_IN_EP : ISOC_OUT_EP;
+ if (usb_endpoint_xfer_int(&ep->desc))
+ return in ? INT_IN_EP : INT_OUT_EP;
+ return 0;
}
/* Return the maximum endpoint service interval time (ESIT) payload.
struct xhci_ep_ctx *ep_ctx;
struct xhci_ring *ep_ring;
unsigned int max_packet;
- unsigned int max_burst;
- enum xhci_ring_type type;
+ enum xhci_ring_type ring_type;
u32 max_esit_payload;
u32 endpoint_type;
+ unsigned int max_burst;
+ unsigned int interval;
+ unsigned int mult;
+ unsigned int avg_trb_len;
+ unsigned int err_count = 0;
ep_index = xhci_get_endpoint_index(&ep->desc);
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
endpoint_type = xhci_get_endpoint_type(ep);
if (!endpoint_type)
return -EINVAL;
- ep_ctx->ep_info2 = cpu_to_le32(endpoint_type);
- type = usb_endpoint_type(&ep->desc);
+ ring_type = usb_endpoint_type(&ep->desc);
/* Set up the endpoint ring */
virt_dev->eps[ep_index].new_ring =
- xhci_ring_alloc(xhci, 2, 1, type, mem_flags);
+ xhci_ring_alloc(xhci, 2, 1, ring_type, mem_flags);
if (!virt_dev->eps[ep_index].new_ring) {
/* Attempt to use the ring cache */
if (virt_dev->num_rings_cached == 0)
virt_dev->ring_cache[virt_dev->num_rings_cached];
virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL;
xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring,
- 1, type);
+ 1, ring_type);
}
virt_dev->eps[ep_index].skip = false;
ep_ring = virt_dev->eps[ep_index].new_ring;
- ep_ctx->deq = cpu_to_le64(ep_ring->first_seg->dma | ep_ring->cycle_state);
- ep_ctx->ep_info = cpu_to_le32(xhci_get_endpoint_interval(udev, ep)
- | EP_MULT(xhci_get_endpoint_mult(udev, ep)));
+ /*
+ * Get values to fill the endpoint context, mostly from ep descriptor.
+ * The average TRB buffer lengt for bulk endpoints is unclear as we
+ * have no clue on scatter gather list entry size. For Isoc and Int,
+ * set it to max available. See xHCI 1.1 spec 4.14.1.1 for details.
+ */
+ max_esit_payload = xhci_get_max_esit_payload(udev, ep);
+ interval = xhci_get_endpoint_interval(udev, ep);
+ mult = xhci_get_endpoint_mult(udev, ep);
+ max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
+ max_burst = xhci_get_endpoint_max_burst(udev, ep);
+ avg_trb_len = max_esit_payload;
/* FIXME dig Mult and streams info out of ep companion desc */
- /* Allow 3 retries for everything but isoc;
- * CErr shall be set to 0 for Isoch endpoints.
- */
+ /* Allow 3 retries for everything but isoc, set CErr = 3 */
if (!usb_endpoint_xfer_isoc(&ep->desc))
- ep_ctx->ep_info2 |= cpu_to_le32(ERROR_COUNT(3));
- else
- ep_ctx->ep_info2 |= cpu_to_le32(ERROR_COUNT(0));
-
- /* Set the max packet size and max burst */
- max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
- max_burst = 0;
- switch (udev->speed) {
- case USB_SPEED_SUPER_PLUS:
- case USB_SPEED_SUPER:
- /* dig out max burst from ep companion desc */
- max_burst = ep->ss_ep_comp.bMaxBurst;
- break;
- case USB_SPEED_HIGH:
- /* Some devices get this wrong */
- if (usb_endpoint_xfer_bulk(&ep->desc))
- max_packet = 512;
- /* bits 11:12 specify the number of additional transaction
- * opportunities per microframe (USB 2.0, section 9.6.6)
- */
- if (usb_endpoint_xfer_isoc(&ep->desc) ||
- usb_endpoint_xfer_int(&ep->desc)) {
- max_burst = (usb_endpoint_maxp(&ep->desc)
- & 0x1800) >> 11;
- }
- break;
- case USB_SPEED_FULL:
- case USB_SPEED_LOW:
- break;
- default:
- BUG();
- }
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) |
- MAX_BURST(max_burst));
- max_esit_payload = xhci_get_max_esit_payload(udev, ep);
- ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload));
-
- /*
- * XXX no idea how to calculate the average TRB buffer length for bulk
- * endpoints, as the driver gives us no clue how big each scatter gather
- * list entry (or buffer) is going to be.
- *
- * For isochronous and interrupt endpoints, we set it to the max
- * available, until we have new API in the USB core to allow drivers to
- * declare how much bandwidth they actually need.
- *
- * Normally, it would be calculated by taking the total of the buffer
- * lengths in the TD and then dividing by the number of TRBs in a TD,
- * including link TRBs, No-op TRBs, and Event data TRBs. Since we don't
- * use Event Data TRBs, and we don't chain in a link TRB on short
- * transfers, we're basically dividing by 1.
- *
- * xHCI 1.0 and 1.1 specification indicates that the Average TRB Length
- * should be set to 8 for control endpoints.
- */
+ err_count = 3;
+ /* Some devices get this wrong */
+ if (usb_endpoint_xfer_bulk(&ep->desc) && udev->speed == USB_SPEED_HIGH)
+ max_packet = 512;
+ /* xHCI 1.0 and 1.1 indicates that ctrl ep avg TRB Length should be 8 */
if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version >= 0x100)
- ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8));
- else
- ep_ctx->tx_info |=
- cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(max_esit_payload));
+ avg_trb_len = 8;
+
+ /* Fill the endpoint context */
+ ep_ctx->ep_info = cpu_to_le32(EP_INTERVAL(interval) |
+ EP_MULT(mult));
+ ep_ctx->ep_info2 = cpu_to_le32(EP_TYPE(endpoint_type) |
+ MAX_PACKET(max_packet) |
+ MAX_BURST(max_burst) |
+ ERROR_COUNT(err_count));
+ ep_ctx->deq = cpu_to_le64(ep_ring->first_seg->dma |
+ ep_ring->cycle_state);
+
+ ep_ctx->tx_info = cpu_to_le32(EP_MAX_ESIT_PAYLOAD_LO(max_esit_payload) |
+ EP_AVG_TRB_LENGTH(avg_trb_len));
/* FIXME Debug endpoint context */
return 0;
projects / cascardo / linux.git / commitdiff