DT: phy.txt: Clarify expected compatible values

PHY devices may only list compatibility with clause 22, 45, and if
they need to be more specific, their PHY identifier values. No other
compatible strings are allowed.  Make this clear in the documentation,
and remove examples where make/model compatible strings are listed.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
index 451fef2..10587bd 100644 (file)
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt
@@ -68,7 +68,7 @@ ethernet@f0b60000 {
                phy1: ethernet-phy@1 {
                        max-speed = <1000>;
                        reg = <0x1>;
-                       compatible = "brcm,28nm-gphy", "ethernet-phy-ieee802.3-c22";
+                       compatible = "ethernet-phy-ieee802.3-c22";
                };
        };
 };
@@ -115,7 +115,7 @@ ethernet@f0ba0000 {
                phy0: ethernet-phy@0 {
                        max-speed = <1000>;
                        reg = <0x0>;
-                       compatible = "brcm,bcm53125", "ethernet-phy-ieee802.3-c22";
+                       compatible = "ethernet-phy-ieee802.3-c22";
                };
        };
 };

diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
index 7938411..694987d 100644 (file)
--- a/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
+++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.txt
@@ -38,7 +38,6 @@ Example :
 
                        phy11: ethernet-phy@1 {
                                reg = <1>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -48,7 +47,6 @@ Example :
                        };
                        phy12: ethernet-phy@2 {
                                reg = <2>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -58,7 +56,6 @@ Example :
                        };
                        phy13: ethernet-phy@3 {
                                reg = <3>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -68,7 +65,6 @@ Example :
                        };
                        phy14: ethernet-phy@4 {
                                reg = <4>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -85,7 +81,6 @@ Example :
 
                        phy21: ethernet-phy@1 {
                                reg = <1>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -95,7 +90,6 @@ Example :
                        };
                        phy22: ethernet-phy@2 {
                                reg = <2>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -105,7 +99,6 @@ Example :
                        };
                        phy23: ethernet-phy@3 {
                                reg = <3>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -115,7 +108,6 @@ Example :
                        };
                        phy24: ethernet-phy@4 {
                                reg = <4>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,

diff --git a/Documentation/devicetree/bindings/net/mdio-mux.txt b/Documentation/devicetree/bindings/net/mdio-mux.txt
index f65606f..491f5bd 100644 (file)
--- a/Documentation/devicetree/bindings/net/mdio-mux.txt
+++ b/Documentation/devicetree/bindings/net/mdio-mux.txt
@@ -47,7 +47,6 @@ Example :
 
                        phy11: ethernet-phy@1 {
                                reg = <1>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -57,7 +56,6 @@ Example :
                        };
                        phy12: ethernet-phy@2 {
                                reg = <2>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -67,7 +65,6 @@ Example :
                        };
                        phy13: ethernet-phy@3 {
                                reg = <3>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -77,7 +74,6 @@ Example :
                        };
                        phy14: ethernet-phy@4 {
                                reg = <4>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -94,7 +90,6 @@ Example :
 
                        phy21: ethernet-phy@1 {
                                reg = <1>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -104,7 +99,6 @@ Example :
                        };
                        phy22: ethernet-phy@2 {
                                reg = <2>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -114,7 +108,6 @@ Example :
                        };
                        phy23: ethernet-phy@3 {
                                reg = <3>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,
@@ -124,7 +117,6 @@ Example :
                        };
                        phy24: ethernet-phy@4 {
                                reg = <4>;
-                               compatible = "marvell,88e1149r";
                                marvell,reg-init = <3 0x10 0 0x5777>,
                                        <3 0x11 0 0x00aa>,
                                        <3 0x12 0 0x4105>,

diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt
index 525e165..bc1c3c8 100644 (file)
--- a/Documentation/devicetree/bindings/net/phy.txt
+++ b/Documentation/devicetree/bindings/net/phy.txt
@@ -17,8 +17,7 @@ Optional Properties:
   "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for
   PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45
   specifications. If neither of these are specified, the default is to
-  assume clause 22. The compatible list may also contain other
-  elements.
+  assume clause 22.
 
   If the phy's identifier is known then the list may contain an entry
   of the form: "ethernet-phy-idAAAA.BBBB" where
@@ -28,6 +27,9 @@ Optional Properties:
             4 hex digits. This is the chip vendor OUI bits 19:24,
             followed by 10 bits of a vendor specific ID.
 
+  The compatible list should not contain other values than those
+  listed here.
+
 - max-speed: Maximum PHY supported speed (10, 100, 1000...)
 
 - broken-turn-around: If set, indicates the PHY device does not correctly