ARM: Keystone: Convert device tree file to use IRQ defines

Use the GIC and standard IRQ binding defines in all IRQ specifiers.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dts
index 612ba8c..a68e34b 100644 (file)
--- a/arch/arm/boot/dts/keystone.dts
+++ b/arch/arm/boot/dts/keystone.dts
@@ -7,6 +7,8 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
 #include "skeleton.dtsi"
 
 / {
@@ -67,18 +69,23 @@
 
        timer {
                compatible = "arm,armv7-timer";
-               interrupts = <1 13 0xf08>,
-                            <1 14 0xf08>,
-                            <1 11 0xf08>,
-                            <1 10 0x308>;
+               interrupts =
+                       <GIC_PPI 13
+                               (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                       <GIC_PPI 14
+                               (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                       <GIC_PPI 11
+                               (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+                       <GIC_PPI 10
+                               (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
        };
 
        pmu {
                compatible = "arm,cortex-a15-pmu";
-               interrupts = <0 20 0xf01>,
-                            <0 21 0xf01>,
-                            <0 22 0xf01>,
-                            <0 23 0xf01>;
+               interrupts = <GIC_SPI 20 IRQ_TYPE_EDGE_RISING>,
+                            <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+                            <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>,
+                            <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
        };
 
        soc {
@@ -100,7 +107,7 @@
                        reg-io-width = <4>;
                        reg = <0x02530c00 0x100>;
                        clock-frequency = <133120000>;
-                       interrupts = <0 277 0xf01>;
+                       interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
                };
 
                uart1:  serial@02531000 {
@@ -110,7 +117,7 @@
                        reg-io-width = <4>;
                        reg = <0x02531000 0x100>;
                        clock-frequency = <133120000>;
-                       interrupts = <0 280 0xf01>;
+                       interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
                };
 
        };