ARM: mvebu: Fix whitespace in NETGEAR ReadyNAS .dts files

This patch provides some whitespace cleanup for NETGEAR
ReadyNAS Duo v2 and 102 .dts files:

 - Fixed bad spaces
 - Added some space between nodes to improve readability

Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index 41c54b1..1c2d13d 100644 (file)
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -64,6 +64,7 @@
                                        marvell,pins = "mpp57";
                                        marvell,function = "gpio";
                                };
+
                                sata1_led_pin: sata1-led-pin {
                                        marvell,pins = "mpp15";
                                        marvell,function = "gpio";

diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
index d408adc..3b1a365 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
@@ -45,34 +45,42 @@
                                marvell,pins = "mpp47";
                                marvell,function = "gpio";
                        };
+
                        pmx_button_backup: pmx-button-backup {
                                marvell,pins = "mpp45";
                                marvell,function = "gpio";
                        };
+
                        pmx_button_reset: pmx-button-reset {
                                marvell,pins = "mpp13";
                                marvell,function = "gpio";
                        };
+
                        pmx_led_blue_power: pmx-led-blue-power {
                                marvell,pins = "mpp31";
                                marvell,function = "gpio";
                        };
+
                        pmx_led_blue_activity: pmx-led-blue-activity {
                                marvell,pins = "mpp38";
                                marvell,function = "gpio";
                        };
+
                        pmx_led_blue_disk1: pmx-led-blue-disk1 {
                                marvell,pins = "mpp23";
                                marvell,function = "gpio";
                        };
+
                        pmx_led_blue_disk2: pmx-led-blue-disk2 {
                                marvell,pins = "mpp22";
                                marvell,function = "gpio";
                        };
+
                        pmx_led_blue_backup: pmx-led-blue-backup {
                                marvell,pins = "mpp29";
                                marvell,function = "gpio";
                        };
+
                        pmx_poweroff: pmx-poweroff {
                                marvell,pins = "mpp30";
                                marvell,function = "gpio";
@@ -129,18 +137,22 @@
                        gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
                        default-state = "keep";
                };
+
                activity_led {
                        label = "status:blue:activity_led";
                        gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
                };
+
                disk1_led {
                        label = "status:blue:disk1_led";
                        gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
                };
+
                disk2_led {
                        label = "status:blue:disk2_led";
                        gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
                };
+
                backup_led {
                        label = "status:blue:backup_led";
                        gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
@@ -158,11 +170,13 @@
                        linux,code = <KEY_POWER>;
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
+
                reset-button {
                        label = "Reset Button";
                        linux,code = <KEY_RESTART>;
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                };
+
                backup-button {
                        label = "Backup Button";
                        linux,code = <KEY_COPY>;
@@ -177,23 +191,23 @@
                gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
        };
 
-        regulators {
-                compatible = "simple-bus";
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                usb_power: regulator@1 {
-                        compatible = "regulator-fixed";
-                        reg = <1>;
-                        regulator-name = "USB 3.0 Power";
-                        regulator-min-microvolt = <5000000>;
-                        regulator-max-microvolt = <5000000>;
-                        enable-active-high;
-                        regulator-always-on;
-                        regulator-boot-on;
-                        gpio = <&gpio1 14 0>;
-                };
-        };
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               usb3_regulator: usb3-regulator {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "USB 3.0 Power";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       enable-active-high;
+                       regulator-always-on;
+                       regulator-boot-on;
+                       gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+               };
+       };
 };
 
 &nand {