* (at your option) any later version.
*/
- #include <linux/io.h>
- #include <linux/init.h>
- #include <linux/slab.h>
- #include <linux/module.h>
- #include <linux/dmaengine.h>
- #include <linux/interrupt.h>
- #include <linux/amba/bus.h>
- #include <linux/amba/pl330.h>
- #include <linux/pm_runtime.h>
- #include <linux/scatterlist.h>
- #include <linux/of.h>
+ #include <linux/kernel.h>
+ #include <linux/io.h>
+ #include <linux/init.h>
+ #include <linux/slab.h>
+ #include <linux/module.h>
+ #include <linux/string.h>
+ #include <linux/delay.h>
+ #include <linux/interrupt.h>
+ #include <linux/dma-mapping.h>
+ #include <linux/dmaengine.h>
+ #include <linux/interrupt.h>
+ #include <linux/amba/bus.h>
+ #include <linux/amba/pl330.h>
+ #include <linux/pm_runtime.h>
+ #include <linux/scatterlist.h>
+ #include <linux/of.h>
+
+ #include "dmaengine.h"
+ #define PL330_MAX_CHAN 8
+ #define PL330_MAX_IRQS 32
+ #define PL330_MAX_PERI 32
+
+ enum pl330_srccachectrl {
+ SCCTRL0, /* Noncacheable and nonbufferable */
+ SCCTRL1, /* Bufferable only */
+ SCCTRL2, /* Cacheable, but do not allocate */
+ SCCTRL3, /* Cacheable and bufferable, but do not allocate */
+ SINVALID1,
+ SINVALID2,
+ SCCTRL6, /* Cacheable write-through, allocate on reads only */
+ SCCTRL7, /* Cacheable write-back, allocate on reads only */
+ };
+
+ enum pl330_dstcachectrl {
+ DCCTRL0, /* Noncacheable and nonbufferable */
+ DCCTRL1, /* Bufferable only */
+ DCCTRL2, /* Cacheable, but do not allocate */
+ DCCTRL3, /* Cacheable and bufferable, but do not allocate */
- DINVALID1 = 8,
++ DINVALID1, /* AWCACHE = 0x1000 */
+ DINVALID2,
+ DCCTRL6, /* Cacheable write-through, allocate on writes only */
+ DCCTRL7, /* Cacheable write-back, allocate on writes only */
+ };
+
+ enum pl330_byteswap {
+ SWAP_NO,
+ SWAP_2,
+ SWAP_4,
+ SWAP_8,
+ SWAP_16,
+ };
+
+ enum pl330_reqtype {
+ MEMTOMEM,
+ MEMTODEV,
+ DEVTOMEM,
+ DEVTODEV,
+ };
+
+ /* Register and Bit field Definitions */
+ #define DS 0x0
+ #define DS_ST_STOP 0x0
+ #define DS_ST_EXEC 0x1
+ #define DS_ST_CMISS 0x2
+ #define DS_ST_UPDTPC 0x3
+ #define DS_ST_WFE 0x4
+ #define DS_ST_ATBRR 0x5
+ #define DS_ST_QBUSY 0x6
+ #define DS_ST_WFP 0x7
+ #define DS_ST_KILL 0x8
+ #define DS_ST_CMPLT 0x9
+ #define DS_ST_FLTCMP 0xe
+ #define DS_ST_FAULT 0xf
+
+ #define DPC 0x4
+ #define INTEN 0x20
+ #define ES 0x24
+ #define INTSTATUS 0x28
+ #define INTCLR 0x2c
+ #define FSM 0x30
+ #define FSC 0x34
+ #define FTM 0x38
+
+ #define _FTC 0x40
+ #define FTC(n) (_FTC + (n)*0x4)
+
+ #define _CS 0x100
+ #define CS(n) (_CS + (n)*0x8)
+ #define CS_CNS (1 << 21)
+
+ #define _CPC 0x104
+ #define CPC(n) (_CPC + (n)*0x8)
+
+ #define _SA 0x400
+ #define SA(n) (_SA + (n)*0x20)
+
+ #define _DA 0x404
+ #define DA(n) (_DA + (n)*0x20)
+
+ #define _CC 0x408
+ #define CC(n) (_CC + (n)*0x20)
+
+ #define CC_SRCINC (1 << 0)
+ #define CC_DSTINC (1 << 14)
+ #define CC_SRCPRI (1 << 8)
+ #define CC_DSTPRI (1 << 22)
+ #define CC_SRCNS (1 << 9)
+ #define CC_DSTNS (1 << 23)
+ #define CC_SRCIA (1 << 10)
+ #define CC_DSTIA (1 << 24)
+ #define CC_SRCBRSTLEN_SHFT 4
+ #define CC_DSTBRSTLEN_SHFT 18
+ #define CC_SRCBRSTSIZE_SHFT 1
+ #define CC_DSTBRSTSIZE_SHFT 15
+ #define CC_SRCCCTRL_SHFT 11
+ #define CC_SRCCCTRL_MASK 0x7
+ #define CC_DSTCCTRL_SHFT 25
+ #define CC_DRCCCTRL_MASK 0x7
+ #define CC_SWAP_SHFT 28
+
+ #define _LC0 0x40c
+ #define LC0(n) (_LC0 + (n)*0x20)
+
+ #define _LC1 0x410
+ #define LC1(n) (_LC1 + (n)*0x20)
+
+ #define DBGSTATUS 0xd00
+ #define DBG_BUSY (1 << 0)
+
+ #define DBGCMD 0xd04
+ #define DBGINST0 0xd08
+ #define DBGINST1 0xd0c
+
+ #define CR0 0xe00
+ #define CR1 0xe04
+ #define CR2 0xe08
+ #define CR3 0xe0c
+ #define CR4 0xe10
+ #define CRD 0xe14
+
+ #define PERIPH_ID 0xfe0
+ #define PERIPH_REV_SHIFT 20
+ #define PERIPH_REV_MASK 0xf
+ #define PERIPH_REV_R0P0 0
+ #define PERIPH_REV_R1P0 1
+ #define PERIPH_REV_R1P1 2
+ #define PCELL_ID 0xff0
+
+ #define CR0_PERIPH_REQ_SET (1 << 0)
+ #define CR0_BOOT_EN_SET (1 << 1)
+ #define CR0_BOOT_MAN_NS (1 << 2)
+ #define CR0_NUM_CHANS_SHIFT 4
+ #define CR0_NUM_CHANS_MASK 0x7
+ #define CR0_NUM_PERIPH_SHIFT 12
+ #define CR0_NUM_PERIPH_MASK 0x1f
+ #define CR0_NUM_EVENTS_SHIFT 17
+ #define CR0_NUM_EVENTS_MASK 0x1f
+
+ #define CR1_ICACHE_LEN_SHIFT 0
+ #define CR1_ICACHE_LEN_MASK 0x7
+ #define CR1_NUM_ICACHELINES_SHIFT 4
+ #define CR1_NUM_ICACHELINES_MASK 0xf
+
+ #define CRD_DATA_WIDTH_SHIFT 0
+ #define CRD_DATA_WIDTH_MASK 0x7
+ #define CRD_WR_CAP_SHIFT 4
+ #define CRD_WR_CAP_MASK 0x7
+ #define CRD_WR_Q_DEP_SHIFT 8
+ #define CRD_WR_Q_DEP_MASK 0xf
+ #define CRD_RD_CAP_SHIFT 12
+ #define CRD_RD_CAP_MASK 0x7
+ #define CRD_RD_Q_DEP_SHIFT 16
+ #define CRD_RD_Q_DEP_MASK 0xf
+ #define CRD_DATA_BUFF_SHIFT 20
+ #define CRD_DATA_BUFF_MASK 0x3ff
+
+ #define PART 0x330
+ #define DESIGNER 0x41
+ #define REVISION 0x0
+ #define INTEG_CFG 0x0
+ #define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12))
+
+ #define PCELL_ID_VAL 0xb105f00d
+
+ #define PL330_STATE_STOPPED (1 << 0)
+ #define PL330_STATE_EXECUTING (1 << 1)
+ #define PL330_STATE_WFE (1 << 2)
+ #define PL330_STATE_FAULTING (1 << 3)
+ #define PL330_STATE_COMPLETING (1 << 4)
+ #define PL330_STATE_WFP (1 << 5)
+ #define PL330_STATE_KILLING (1 << 6)
+ #define PL330_STATE_FAULT_COMPLETING (1 << 7)
+ #define PL330_STATE_CACHEMISS (1 << 8)
+ #define PL330_STATE_UPDTPC (1 << 9)
+ #define PL330_STATE_ATBARRIER (1 << 10)
+ #define PL330_STATE_QUEUEBUSY (1 << 11)
+ #define PL330_STATE_INVALID (1 << 15)
+
+ #define PL330_STABLE_STATES (PL330_STATE_STOPPED | PL330_STATE_EXECUTING \
+ | PL330_STATE_WFE | PL330_STATE_FAULTING)
+
+ #define CMD_DMAADDH 0x54
+ #define CMD_DMAEND 0x00
+ #define CMD_DMAFLUSHP 0x35
+ #define CMD_DMAGO 0xa0
+ #define CMD_DMALD 0x04
+ #define CMD_DMALDP 0x25
+ #define CMD_DMALP 0x20
+ #define CMD_DMALPEND 0x28
+ #define CMD_DMAKILL 0x01
+ #define CMD_DMAMOV 0xbc
+ #define CMD_DMANOP 0x18
+ #define CMD_DMARMB 0x12
+ #define CMD_DMASEV 0x34
+ #define CMD_DMAST 0x08
+ #define CMD_DMASTP 0x29
+ #define CMD_DMASTZ 0x0c
+ #define CMD_DMAWFE 0x36
+ #define CMD_DMAWFP 0x30
+ #define CMD_DMAWMB 0x13
+
+ #define SZ_DMAADDH 3
+ #define SZ_DMAEND 1
+ #define SZ_DMAFLUSHP 2
+ #define SZ_DMALD 1
+ #define SZ_DMALDP 2
+ #define SZ_DMALP 2
+ #define SZ_DMALPEND 2
+ #define SZ_DMAKILL 1
+ #define SZ_DMAMOV 6
+ #define SZ_DMANOP 1
+ #define SZ_DMARMB 1
+ #define SZ_DMASEV 2
+ #define SZ_DMAST 1
+ #define SZ_DMASTP 2
+ #define SZ_DMASTZ 1
+ #define SZ_DMAWFE 2
+ #define SZ_DMAWFP 2
+ #define SZ_DMAWMB 1
+ #define SZ_DMAGO 6
+
+ #define BRST_LEN(ccr) ((((ccr) >> CC_SRCBRSTLEN_SHFT) & 0xf) + 1)
+ #define BRST_SIZE(ccr) (1 << (((ccr) >> CC_SRCBRSTSIZE_SHFT) & 0x7))
+
+ #define BYTE_TO_BURST(b, ccr) ((b) / BRST_SIZE(ccr) / BRST_LEN(ccr))
+ #define BURST_TO_BYTE(c, ccr) ((c) * BRST_SIZE(ccr) * BRST_LEN(ccr))
+
+ /*
+ * With 256 bytes, we can do more than 2.5MB and 5MB xfers per req
+ * at 1byte/burst for P<->M and M<->M respectively.
+ * For typical scenario, at 1word/burst, 10MB and 20MB xfers per req
+ * should be enough for P<->M and M<->M respectively.
+ */
+ #define MCODE_BUFF_PER_REQ 256
+
+ /* If the _pl330_req is available to the client */
+ #define IS_FREE(req) (*((u8 *)((req)->mc_cpu)) == CMD_DMAEND)
+
+ /* Use this _only_ to wait on transient states */
+ #define UNTIL(t, s) while (!(_state(t) & (s))) cpu_relax();
+
+ #ifdef PL330_DEBUG_MCGEN
+ static unsigned cmd_line;
+ #define PL330_DBGCMD_DUMP(off, x...) do { \
+ printk("%x:", cmd_line); \
+ printk(x); \
+ cmd_line += off; \
+ } while (0)
+ #define PL330_DBGMC_START(addr) (cmd_line = addr)
+ #else
+ #define PL330_DBGCMD_DUMP(off, x...) do {} while (0)
+ #define PL330_DBGMC_START(addr) do {} while (0)
+ #endif
+
+ /* The number of default descriptors */
+
+ #define NR_DEFAULT_DESC 16
+
+ /* Populated by the PL330 core driver for DMA API driver's info */
+ struct pl330_config {
+ u32 periph_id;
+ u32 pcell_id;
+ #define DMAC_MODE_NS (1 << 0)
+ unsigned int mode;
+ unsigned int data_bus_width:10; /* In number of bits */
+ unsigned int data_buf_dep:10;
+ unsigned int num_chan:4;
+ unsigned int num_peri:6;
+ u32 peri_ns;
+ unsigned int num_events:6;
+ u32 irq_ns;
+ };
+
+ /* Handle to the DMAC provided to the PL330 core */
+ struct pl330_info {
+ /* Owning device */
+ struct device *dev;
+ /* Size of MicroCode buffers for each channel. */
+ unsigned mcbufsz;
+ /* ioremap'ed address of PL330 registers. */
+ void __iomem *base;
+ /* Client can freely use it. */
+ void *client_data;
+ /* PL330 core data, Client must not touch it. */
+ void *pl330_data;
+ /* Populated by the PL330 core driver during pl330_add */
+ struct pl330_config pcfg;
+ /*
+ * If the DMAC has some reset mechanism, then the
+ * client may want to provide pointer to the method.
+ */
+ void (*dmac_reset)(struct pl330_info *pi);
+ };
+
+ /**
+ * Request Configuration.
+ * The PL330 core does not modify this and uses the last
+ * working configuration if the request doesn't provide any.
+ *
+ * The Client may want to provide this info only for the
+ * first request and a request with new settings.
+ */
+ struct pl330_reqcfg {
+ /* Address Incrementing */
+ unsigned dst_inc:1;
+ unsigned src_inc:1;
+
+ /*
+ * For now, the SRC & DST protection levels
+ * and burst size/length are assumed same.
+ */
+ bool nonsecure;
+ bool privileged;
+ bool insnaccess;
+ unsigned brst_len:5;
+ unsigned brst_size:3; /* in power of 2 */
+
+ enum pl330_dstcachectrl dcctl;
+ enum pl330_srccachectrl scctl;
+ enum pl330_byteswap swap;
+ struct pl330_config *pcfg;
+ };
+
+ /*
+ * One cycle of DMAC operation.
+ * There may be more than one xfer in a request.
+ */
+ struct pl330_xfer {
+ u32 src_addr;
+ u32 dst_addr;
+ /* Size to xfer */
+ u32 bytes;
+ /*
+ * Pointer to next xfer in the list.
+ * The last xfer in the req must point to NULL.
+ */
+ struct pl330_xfer *next;
+ };
+
+ /* The xfer callbacks are made with one of these arguments. */
+ enum pl330_op_err {
+ /* The all xfers in the request were success. */
+ PL330_ERR_NONE,
+ /* If req aborted due to global error. */
+ PL330_ERR_ABORT,
+ /* If req failed due to problem with Channel. */
+ PL330_ERR_FAIL,
+ };
+
+ /* A request defining Scatter-Gather List ending with NULL xfer. */
+ struct pl330_req {
+ enum pl330_reqtype rqtype;
+ /* Index of peripheral for the xfer. */
+ unsigned peri:5;
+ /* Unique token for this xfer, set by the client. */
+ void *token;
+ /* Callback to be called after xfer. */
+ void (*xfer_cb)(void *token, enum pl330_op_err err);
+ /* If NULL, req will be done at last set parameters. */
+ struct pl330_reqcfg *cfg;
+ /* Pointer to first xfer in the request. */
+ struct pl330_xfer *x;
+ };
+
+ /*
+ * To know the status of the channel and DMAC, the client
+ * provides a pointer to this structure. The PL330 core
+ * fills it with current information.
+ */
+ struct pl330_chanstatus {
+ /*
+ * If the DMAC engine halted due to some error,
+ * the client should remove-add DMAC.
+ */
+ bool dmac_halted;
+ /*
+ * If channel is halted due to some error,
+ * the client should ABORT/FLUSH and START the channel.
+ */
+ bool faulting;
+ /* Location of last load */
+ u32 src_addr;
+ /* Location of last store */
+ u32 dst_addr;
+ /*
+ * Pointer to the currently active req, NULL if channel is
+ * inactive, even though the requests may be present.
+ */
+ struct pl330_req *top_req;
+ /* Pointer to req waiting second in the queue if any. */
+ struct pl330_req *wait_req;
+ };
+
+ enum pl330_chan_op {
+ /* Start the channel */
+ PL330_OP_START,
+ /* Abort the active xfer */
+ PL330_OP_ABORT,
+ /* Stop xfer and flush queue */
+ PL330_OP_FLUSH,
+ };
+
+ struct _xfer_spec {
+ u32 ccr;
+ struct pl330_req *r;
+ struct pl330_xfer *x;
+ };
+
+ enum dmamov_dst {
+ SAR = 0,
+ CCR,
+ DAR,
+ };
+
+ enum pl330_dst {
+ SRC = 0,
+ DST,
+ };
+
+ enum pl330_cond {
+ SINGLE,
+ BURST,
+ ALWAYS,
+ };
+
+ struct _pl330_req {
+ u32 mc_bus;
+ void *mc_cpu;
+ /* Number of bytes taken to setup MC for the req */
+ u32 mc_len;
+ struct pl330_req *r;
+ /* Hook to attach to DMAC's list of reqs with due callback */
+ struct list_head rqd;
+ };
+
+ /* ToBeDone for tasklet */
+ struct _pl330_tbd {
+ bool reset_dmac;
+ bool reset_mngr;
+ u8 reset_chan;
+ };
+
+ /* A DMAC Thread */
+ struct pl330_thread {
+ u8 id;
+ int ev;
+ /* If the channel is not yet acquired by any client */
+ bool free;
+ /* Parent DMAC */
+ struct pl330_dmac *dmac;
+ /* Only two at a time */
+ struct _pl330_req req[2];
+ /* Index of the last enqueued request */
+ unsigned lstenq;
+ /* Index of the last submitted request or -1 if the DMA is stopped */
+ int req_running;
+ };
+
+ enum pl330_dmac_state {
+ UNINIT,
+ INIT,
+ DYING,
+ };
+
+ /* A DMAC */
+ struct pl330_dmac {
+ spinlock_t lock;
+ /* Holds list of reqs with due callbacks */
+ struct list_head req_done;
+ /* Pointer to platform specific stuff */
+ struct pl330_info *pinfo;
+ /* Maximum possible events/irqs */
+ int events[32];
+ /* BUS address of MicroCode buffer */
+ u32 mcode_bus;
+ /* CPU address of MicroCode buffer */
+ void *mcode_cpu;
+ /* List of all Channel threads */
+ struct pl330_thread *channels;
+ /* Pointer to the MANAGER thread */
+ struct pl330_thread *manager;
+ /* To handle bad news in interrupt */
+ struct tasklet_struct tasks;
+ struct _pl330_tbd dmac_tbd;
+ /* State of DMAC operation */
+ enum pl330_dmac_state state;
+ };
+
+ enum desc_status {
+ /* In the DMAC pool */
+ FREE,
+ /*
+ * Allocted to some channel during prep_xxx
+ * Also may be sitting on the work_list.
+ */
+ PREP,
+ /*
+ * Sitting on the work_list and already submitted
+ * to the PL330 core. Not more than two descriptors
+ * of a channel can be BUSY at any time.
+ */
+ BUSY,
+ /*
+ * Sitting on the channel work_list but xfer done
+ * by PL330 core
+ */
+ DONE,
+ };
+
+ struct dma_pl330_chan {
+ /* Schedule desc completion */
+ struct tasklet_struct task;
+
+ /* DMA-Engine Channel */
+ struct dma_chan chan;
+
+ /* List of to be xfered descriptors */
+ struct list_head work_list;
+
+ /* Pointer to the DMAC that manages this channel,
+ * NULL if the channel is available to be acquired.
+ * As the parent, this DMAC also provides descriptors
+ * to the channel.
+ */
+ struct dma_pl330_dmac *dmac;
+
+ /* To protect channel manipulation */
+ spinlock_t lock;
+
+ /* Token of a hardware channel thread of PL330 DMAC
+ * NULL if the channel is available to be acquired.
+ */
+ void *pl330_chid;
+
+ /* For D-to-M and M-to-D channels */
+ int burst_sz; /* the peripheral fifo width */
+ int burst_len; /* the number of burst */
+ dma_addr_t fifo_addr;
+
+ /* for cyclic capability */
+ bool cyclic;
+ };
+
+ struct dma_pl330_dmac {
+ struct pl330_info pif;
+
+ /* DMA-Engine Device */
+ struct dma_device ddma;
+
+ /* Pool of descriptors available for the DMAC's channels */
+ struct list_head desc_pool;
+ /* To protect desc_pool manipulation */
+ spinlock_t pool_lock;
+
+ /* Peripheral channels connected to this DMAC */
+ struct dma_pl330_chan *peripherals; /* keep at end */
+
+ struct clk *clk;
+ };
+
+ struct dma_pl330_desc {
+ /* To attach to a queue as child */
+ struct list_head node;
+
+ /* Descriptor for the DMA Engine API */
+ struct dma_async_tx_descriptor txd;
+
+ /* Xfer for PL330 core */
+ struct pl330_xfer px;
+
+ struct pl330_reqcfg rqcfg;
+ struct pl330_req req;
+
+ enum desc_status status;
+
+ /* The channel which currently holds this desc */
+ struct dma_pl330_chan *pchan;
+ };
+
+ static inline void _callback(struct pl330_req *r, enum pl330_op_err err)
+ {
+ if (r && r->xfer_cb)
+ r->xfer_cb(r->token, err);
+ }
+
+ static inline bool _queue_empty(struct pl330_thread *thrd)
+ {
+ return (IS_FREE(&thrd->req[0]) && IS_FREE(&thrd->req[1]))
+ ? true : false;
+ }
+
+ static inline bool _queue_full(struct pl330_thread *thrd)
+ {
+ return (IS_FREE(&thrd->req[0]) || IS_FREE(&thrd->req[1]))
+ ? false : true;
+ }
+
+ static inline bool is_manager(struct pl330_thread *thrd)
+ {
+ struct pl330_dmac *pl330 = thrd->dmac;
+
+ /* MANAGER is indexed at the end */
+ if (thrd->id == pl330->pinfo->pcfg.num_chan)
+ return true;
+ else
+ return false;
+ }
+
+ /* If manager of the thread is in Non-Secure mode */
+ static inline bool _manager_ns(struct pl330_thread *thrd)
+ {
+ struct pl330_dmac *pl330 = thrd->dmac;
+
+ return (pl330->pinfo->pcfg.mode & DMAC_MODE_NS) ? true : false;
+ }
+
+ static inline u32 get_id(struct pl330_info *pi, u32 off)
+ {
+ void __iomem *regs = pi->base;
+ u32 id = 0;
+
+ id |= (readb(regs + off + 0x0) << 0);
+ id |= (readb(regs + off + 0x4) << 8);
+ id |= (readb(regs + off + 0x8) << 16);
+ id |= (readb(regs + off + 0xc) << 24);
+
+ return id;
+ }
+
+ static inline u32 get_revision(u32 periph_id)
+ {
+ return (periph_id >> PERIPH_REV_SHIFT) & PERIPH_REV_MASK;
+ }
+
+ static inline u32 _emit_ADDH(unsigned dry_run, u8 buf[],
+ enum pl330_dst da, u16 val)
+ {
+ if (dry_run)
+ return SZ_DMAADDH;
+
+ buf[0] = CMD_DMAADDH;
+ buf[0] |= (da << 1);
+ *((u16 *)&buf[1]) = val;
+
+ PL330_DBGCMD_DUMP(SZ_DMAADDH, "\tDMAADDH %s %u\n",
+ da == 1 ? "DA" : "SA", val);
+
+ return SZ_DMAADDH;
+ }
+
+ static inline u32 _emit_END(unsigned dry_run, u8 buf[])
+ {
+ if (dry_run)
+ return SZ_DMAEND;
+
+ buf[0] = CMD_DMAEND;
+
+ PL330_DBGCMD_DUMP(SZ_DMAEND, "\tDMAEND\n");
+
+ return SZ_DMAEND;
+ }
+
+ static inline u32 _emit_FLUSHP(unsigned dry_run, u8 buf[], u8 peri)
+ {
+ if (dry_run)
+ return SZ_DMAFLUSHP;
+
+ buf[0] = CMD_DMAFLUSHP;
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMAFLUSHP, "\tDMAFLUSHP %u\n", peri >> 3);
+
+ return SZ_DMAFLUSHP;
+ }
+
+ static inline u32 _emit_LD(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+ {
+ if (dry_run)
+ return SZ_DMALD;
+
+ buf[0] = CMD_DMALD;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ PL330_DBGCMD_DUMP(SZ_DMALD, "\tDMALD%c\n",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+ return SZ_DMALD;
+ }
+
+ static inline u32 _emit_LDP(unsigned dry_run, u8 buf[],
+ enum pl330_cond cond, u8 peri)
+ {
+ if (dry_run)
+ return SZ_DMALDP;
+
+ buf[0] = CMD_DMALDP;
+
+ if (cond == BURST)
+ buf[0] |= (1 << 1);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMALDP, "\tDMALDP%c %u\n",
+ cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+ return SZ_DMALDP;
+ }
+
+ static inline u32 _emit_LP(unsigned dry_run, u8 buf[],
+ unsigned loop, u8 cnt)
+ {
+ if (dry_run)
+ return SZ_DMALP;
+
+ buf[0] = CMD_DMALP;
+
+ if (loop)
+ buf[0] |= (1 << 1);
+
+ cnt--; /* DMAC increments by 1 internally */
+ buf[1] = cnt;
+
+ PL330_DBGCMD_DUMP(SZ_DMALP, "\tDMALP_%c %u\n", loop ? '1' : '0', cnt);
+
+ return SZ_DMALP;
+ }
+
+ struct _arg_LPEND {
+ enum pl330_cond cond;
+ bool forever;
+ unsigned loop;
+ u8 bjump;
+ };
+
+ static inline u32 _emit_LPEND(unsigned dry_run, u8 buf[],
+ const struct _arg_LPEND *arg)
+ {
+ enum pl330_cond cond = arg->cond;
+ bool forever = arg->forever;
+ unsigned loop = arg->loop;
+ u8 bjump = arg->bjump;
+
+ if (dry_run)
+ return SZ_DMALPEND;
+
+ buf[0] = CMD_DMALPEND;
+
+ if (loop)
+ buf[0] |= (1 << 2);
+
+ if (!forever)
+ buf[0] |= (1 << 4);
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ buf[1] = bjump;
+
+ PL330_DBGCMD_DUMP(SZ_DMALPEND, "\tDMALP%s%c_%c bjmpto_%x\n",
+ forever ? "FE" : "END",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'),
+ loop ? '1' : '0',
+ bjump);
+
+ return SZ_DMALPEND;
+ }
+
+ static inline u32 _emit_KILL(unsigned dry_run, u8 buf[])
+ {
+ if (dry_run)
+ return SZ_DMAKILL;
+
+ buf[0] = CMD_DMAKILL;
+
+ return SZ_DMAKILL;
+ }
+
+ static inline u32 _emit_MOV(unsigned dry_run, u8 buf[],
+ enum dmamov_dst dst, u32 val)
+ {
+ if (dry_run)
+ return SZ_DMAMOV;
+
+ buf[0] = CMD_DMAMOV;
+ buf[1] = dst;
+ *((u32 *)&buf[2]) = val;
+
+ PL330_DBGCMD_DUMP(SZ_DMAMOV, "\tDMAMOV %s 0x%x\n",
+ dst == SAR ? "SAR" : (dst == DAR ? "DAR" : "CCR"), val);
+
+ return SZ_DMAMOV;
+ }
+
+ static inline u32 _emit_NOP(unsigned dry_run, u8 buf[])
+ {
+ if (dry_run)
+ return SZ_DMANOP;
+
+ buf[0] = CMD_DMANOP;
+
+ PL330_DBGCMD_DUMP(SZ_DMANOP, "\tDMANOP\n");
+
+ return SZ_DMANOP;
+ }
+
+ static inline u32 _emit_RMB(unsigned dry_run, u8 buf[])
+ {
+ if (dry_run)
+ return SZ_DMARMB;
+
+ buf[0] = CMD_DMARMB;
+
+ PL330_DBGCMD_DUMP(SZ_DMARMB, "\tDMARMB\n");
+
+ return SZ_DMARMB;
+ }
+
+ static inline u32 _emit_SEV(unsigned dry_run, u8 buf[], u8 ev)
+ {
+ if (dry_run)
+ return SZ_DMASEV;
+
+ buf[0] = CMD_DMASEV;
+
+ ev &= 0x1f;
+ ev <<= 3;
+ buf[1] = ev;
+
+ PL330_DBGCMD_DUMP(SZ_DMASEV, "\tDMASEV %u\n", ev >> 3);
+
+ return SZ_DMASEV;
+ }
+
+ static inline u32 _emit_ST(unsigned dry_run, u8 buf[], enum pl330_cond cond)
+ {
+ if (dry_run)
+ return SZ_DMAST;
+
+ buf[0] = CMD_DMAST;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (1 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (1 << 0);
+
+ PL330_DBGCMD_DUMP(SZ_DMAST, "\tDMAST%c\n",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'A'));
+
+ return SZ_DMAST;
+ }
+
+ static inline u32 _emit_STP(unsigned dry_run, u8 buf[],
+ enum pl330_cond cond, u8 peri)
+ {
+ if (dry_run)
+ return SZ_DMASTP;
+
+ buf[0] = CMD_DMASTP;
+
+ if (cond == BURST)
+ buf[0] |= (1 << 1);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMASTP, "\tDMASTP%c %u\n",
+ cond == SINGLE ? 'S' : 'B', peri >> 3);
+
+ return SZ_DMASTP;
+ }
+
+ static inline u32 _emit_STZ(unsigned dry_run, u8 buf[])
+ {
+ if (dry_run)
+ return SZ_DMASTZ;
+
+ buf[0] = CMD_DMASTZ;
+
+ PL330_DBGCMD_DUMP(SZ_DMASTZ, "\tDMASTZ\n");
+
+ return SZ_DMASTZ;
+ }
+
+ static inline u32 _emit_WFE(unsigned dry_run, u8 buf[], u8 ev,
+ unsigned invalidate)
+ {
+ if (dry_run)
+ return SZ_DMAWFE;
+
+ buf[0] = CMD_DMAWFE;
+
+ ev &= 0x1f;
+ ev <<= 3;
+ buf[1] = ev;
+
+ if (invalidate)
+ buf[1] |= (1 << 1);
+
+ PL330_DBGCMD_DUMP(SZ_DMAWFE, "\tDMAWFE %u%s\n",
+ ev >> 3, invalidate ? ", I" : "");
+
+ return SZ_DMAWFE;
+ }
+
+ static inline u32 _emit_WFP(unsigned dry_run, u8 buf[],
+ enum pl330_cond cond, u8 peri)
+ {
+ if (dry_run)
+ return SZ_DMAWFP;
+
+ buf[0] = CMD_DMAWFP;
+
+ if (cond == SINGLE)
+ buf[0] |= (0 << 1) | (0 << 0);
+ else if (cond == BURST)
+ buf[0] |= (1 << 1) | (0 << 0);
+ else
+ buf[0] |= (0 << 1) | (1 << 0);
+
+ peri &= 0x1f;
+ peri <<= 3;
+ buf[1] = peri;
+
+ PL330_DBGCMD_DUMP(SZ_DMAWFP, "\tDMAWFP%c %u\n",
+ cond == SINGLE ? 'S' : (cond == BURST ? 'B' : 'P'), peri >> 3);
+
+ return SZ_DMAWFP;
+ }
+
+ static inline u32 _emit_WMB(unsigned dry_run, u8 buf[])
+ {
+ if (dry_run)
+ return SZ_DMAWMB;
+
+ buf[0] = CMD_DMAWMB;
+
+ PL330_DBGCMD_DUMP(SZ_DMAWMB, "\tDMAWMB\n");
+
+ return SZ_DMAWMB;
+ }
+
+ struct _arg_GO {
+ u8 chan;
+ u32 addr;
+ unsigned ns;
+ };
+
+ static inline u32 _emit_GO(unsigned dry_run, u8 buf[],
+ const struct _arg_GO *arg)
+ {
+ u8 chan = arg->chan;
+ u32 addr = arg->addr;
+ unsigned ns = arg->ns;
+
+ if (dry_run)
+ return SZ_DMAGO;
+
+ buf[0] = CMD_DMAGO;
+ buf[0] |= (ns << 1);
+
+ buf[1] = chan & 0x7;
+
+ *((u32 *)&buf[2]) = addr;
+
+ return SZ_DMAGO;
+ }
+
+ #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
+
+ /* Returns Time-Out */
+ static bool _until_dmac_idle(struct pl330_thread *thrd)
+ {
+ void __iomem *regs = thrd->dmac->pinfo->base;
+ unsigned long loops = msecs_to_loops(5);
+
+ do {
+ /* Until Manager is Idle */
+ if (!(readl(regs + DBGSTATUS) & DBG_BUSY))
+ break;
+
+ cpu_relax();
+ } while (--loops);
+
+ if (!loops)
+ return true;
+
+ return false;
+ }
+
+ static inline void _execute_DBGINSN(struct pl330_thread *thrd,
+ u8 insn[], bool as_manager)
+ {
+ void __iomem *regs = thrd->dmac->pinfo->base;
+ u32 val;
+
+ val = (insn[0] << 16) | (insn[1] << 24);
+ if (!as_manager) {
+ val |= (1 << 0);
+ val |= (thrd->id << 8); /* Channel Number */
+ }
+ writel(val, regs + DBGINST0);
+
+ val = *((u32 *)&insn[2]);
+ writel(val, regs + DBGINST1);
+
+ /* If timed out due to halted state-machine */
+ if (_until_dmac_idle(thrd)) {
+ dev_err(thrd->dmac->pinfo->dev, "DMAC halted!\n");
+ return;
+ }
+
+ /* Get going */
+ writel(0, regs + DBGCMD);
+ }
+
+ /*
+ * Mark a _pl330_req as free.
+ * We do it by writing DMAEND as the first instruction
+ * because no valid request is going to have DMAEND as
+ * its first instruction to execute.
+ */
+ static void mark_free(struct pl330_thread *thrd, int idx)
+ {
+ struct _pl330_req *req = &thrd->req[idx];
+
+ _emit_END(0, req->mc_cpu);
+ req->mc_len = 0;
+
+ thrd->req_running = -1;
+ }
+
+ static inline u32 _state(struct pl330_thread *thrd)
+ {
+ void __iomem *regs = thrd->dmac->pinfo->base;
+ u32 val;
+
+ if (is_manager(thrd))
+ val = readl(regs + DS) & 0xf;
+ else
+ val = readl(regs + CS(thrd->id)) & 0xf;
+
+ switch (val) {
+ case DS_ST_STOP:
+ return PL330_STATE_STOPPED;
+ case DS_ST_EXEC:
+ return PL330_STATE_EXECUTING;
+ case DS_ST_CMISS:
+ return PL330_STATE_CACHEMISS;
+ case DS_ST_UPDTPC:
+ return PL330_STATE_UPDTPC;
+ case DS_ST_WFE:
+ return PL330_STATE_WFE;
+ case DS_ST_FAULT:
+ return PL330_STATE_FAULTING;
+ case DS_ST_ATBRR:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_ATBARRIER;
+ case DS_ST_QBUSY:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_QUEUEBUSY;
+ case DS_ST_WFP:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_WFP;
+ case DS_ST_KILL:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_KILLING;
+ case DS_ST_CMPLT:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_COMPLETING;
+ case DS_ST_FLTCMP:
+ if (is_manager(thrd))
+ return PL330_STATE_INVALID;
+ else
+ return PL330_STATE_FAULT_COMPLETING;
+ default:
+ return PL330_STATE_INVALID;
+ }
+ }
+
+ static void _stop(struct pl330_thread *thrd)
+ {
+ void __iomem *regs = thrd->dmac->pinfo->base;
+ u8 insn[6] = {0, 0, 0, 0, 0, 0};
+
+ if (_state(thrd) == PL330_STATE_FAULT_COMPLETING)
+ UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+ /* Return if nothing needs to be done */
+ if (_state(thrd) == PL330_STATE_COMPLETING
+ || _state(thrd) == PL330_STATE_KILLING
+ || _state(thrd) == PL330_STATE_STOPPED)
+ return;
+
+ _emit_KILL(0, insn);
+
+ /* Stop generating interrupts for SEV */
+ writel(readl(regs + INTEN) & ~(1 << thrd->ev), regs + INTEN);
+
+ _execute_DBGINSN(thrd, insn, is_manager(thrd));
+ }
+
+ /* Start doing req 'idx' of thread 'thrd' */
+ static bool _trigger(struct pl330_thread *thrd)
+ {
+ void __iomem *regs = thrd->dmac->pinfo->base;
+ struct _pl330_req *req;
+ struct pl330_req *r;
+ struct _arg_GO go;
+ unsigned ns;
+ u8 insn[6] = {0, 0, 0, 0, 0, 0};
+ int idx;
+
+ /* Return if already ACTIVE */
+ if (_state(thrd) != PL330_STATE_STOPPED)
+ return true;
+
+ idx = 1 - thrd->lstenq;
+ if (!IS_FREE(&thrd->req[idx]))
+ req = &thrd->req[idx];
+ else {
+ idx = thrd->lstenq;
+ if (!IS_FREE(&thrd->req[idx]))
+ req = &thrd->req[idx];
+ else
+ req = NULL;
+ }
+
+ /* Return if no request */
+ if (!req || !req->r)
+ return true;
+
+ r = req->r;
+
+ if (r->cfg)
+ ns = r->cfg->nonsecure ? 1 : 0;
+ else if (readl(regs + CS(thrd->id)) & CS_CNS)
+ ns = 1;
+ else
+ ns = 0;
+
+ /* See 'Abort Sources' point-4 at Page 2-25 */
+ if (_manager_ns(thrd) && !ns)
+ dev_info(thrd->dmac->pinfo->dev, "%s:%d Recipe for ABORT!\n",
+ __func__, __LINE__);
+
+ go.chan = thrd->id;
+ go.addr = req->mc_bus;
+ go.ns = ns;
+ _emit_GO(0, insn, &go);
+
+ /* Set to generate interrupts for SEV */
+ writel(readl(regs + INTEN) | (1 << thrd->ev), regs + INTEN);
+
+ /* Only manager can execute GO */
+ _execute_DBGINSN(thrd, insn, true);
+
+ thrd->req_running = idx;
+
+ return true;
+ }
+
+ static bool _start(struct pl330_thread *thrd)
+ {
+ switch (_state(thrd)) {
+ case PL330_STATE_FAULT_COMPLETING:
+ UNTIL(thrd, PL330_STATE_FAULTING | PL330_STATE_KILLING);
+
+ if (_state(thrd) == PL330_STATE_KILLING)
+ UNTIL(thrd, PL330_STATE_STOPPED)
+
+ case PL330_STATE_FAULTING:
+ _stop(thrd);
+
+ case PL330_STATE_KILLING:
+ case PL330_STATE_COMPLETING:
+ UNTIL(thrd, PL330_STATE_STOPPED)
+
+ case PL330_STATE_STOPPED:
+ return _trigger(thrd);
+
+ case PL330_STATE_WFP:
+ case PL330_STATE_QUEUEBUSY:
+ case PL330_STATE_ATBARRIER:
+ case PL330_STATE_UPDTPC:
+ case PL330_STATE_CACHEMISS:
+ case PL330_STATE_EXECUTING:
+ return true;
+
+ case PL330_STATE_WFE: /* For RESUME, nothing yet */
+ default:
+ return false;
+ }
+ }
+
+ static inline int _ldst_memtomem(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+ {
+ int off = 0;
+ struct pl330_config *pcfg = pxs->r->cfg->pcfg;
+
+ /* check lock-up free version */
+ if (get_revision(pcfg->periph_id) >= PERIPH_REV_R1P0) {
+ while (cyc--) {
+ off += _emit_LD(dry_run, &buf[off], ALWAYS);
+ off += _emit_ST(dry_run, &buf[off], ALWAYS);
+ }
+ } else {
+ while (cyc--) {
+ off += _emit_LD(dry_run, &buf[off], ALWAYS);
+ off += _emit_RMB(dry_run, &buf[off]);
+ off += _emit_ST(dry_run, &buf[off], ALWAYS);
+ off += _emit_WMB(dry_run, &buf[off]);
+ }
+ }
+
+ return off;
+ }
+
+ static inline int _ldst_devtomem(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+ {
+ int off = 0;
+
+ while (cyc--) {
+ off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+ off += _emit_LDP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+ off += _emit_ST(dry_run, &buf[off], ALWAYS);
+ off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+ }
+
+ return off;
+ }
+
+ static inline int _ldst_memtodev(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+ {
+ int off = 0;
+
+ while (cyc--) {
+ off += _emit_WFP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+ off += _emit_LD(dry_run, &buf[off], ALWAYS);
+ off += _emit_STP(dry_run, &buf[off], SINGLE, pxs->r->peri);
+ off += _emit_FLUSHP(dry_run, &buf[off], pxs->r->peri);
+ }
+
+ return off;
+ }
+
+ static int _bursts(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs, int cyc)
+ {
+ int off = 0;
+
+ switch (pxs->r->rqtype) {
+ case MEMTODEV:
+ off += _ldst_memtodev(dry_run, &buf[off], pxs, cyc);
+ break;
+ case DEVTOMEM:
+ off += _ldst_devtomem(dry_run, &buf[off], pxs, cyc);
+ break;
+ case MEMTOMEM:
+ off += _ldst_memtomem(dry_run, &buf[off], pxs, cyc);
+ break;
+ default:
+ off += 0x40000000; /* Scare off the Client */
+ break;
+ }
+
+ return off;
+ }
+
+ /* Returns bytes consumed and updates bursts */
+ static inline int _loop(unsigned dry_run, u8 buf[],
+ unsigned long *bursts, const struct _xfer_spec *pxs)
+ {
+ int cyc, cycmax, szlp, szlpend, szbrst, off;
+ unsigned lcnt0, lcnt1, ljmp0, ljmp1;
+ struct _arg_LPEND lpend;
+
+ /* Max iterations possible in DMALP is 256 */
+ if (*bursts >= 256*256) {
+ lcnt1 = 256;
+ lcnt0 = 256;
+ cyc = *bursts / lcnt1 / lcnt0;
+ } else if (*bursts > 256) {
+ lcnt1 = 256;
+ lcnt0 = *bursts / lcnt1;
+ cyc = 1;
+ } else {
+ lcnt1 = *bursts;
+ lcnt0 = 0;
+ cyc = 1;
+ }
+
+ szlp = _emit_LP(1, buf, 0, 0);
+ szbrst = _bursts(1, buf, pxs, 1);
+
+ lpend.cond = ALWAYS;
+ lpend.forever = false;
+ lpend.loop = 0;
+ lpend.bjump = 0;
+ szlpend = _emit_LPEND(1, buf, &lpend);
+
+ if (lcnt0) {
+ szlp *= 2;
+ szlpend *= 2;
+ }
+
+ /*
+ * Max bursts that we can unroll due to limit on the
+ * size of backward jump that can be encoded in DMALPEND
+ * which is 8-bits and hence 255
+ */
+ cycmax = (255 - (szlp + szlpend)) / szbrst;
+
+ cyc = (cycmax < cyc) ? cycmax : cyc;
+
+ off = 0;
+
+ if (lcnt0) {
+ off += _emit_LP(dry_run, &buf[off], 0, lcnt0);
+ ljmp0 = off;
+ }
+
+ off += _emit_LP(dry_run, &buf[off], 1, lcnt1);
+ ljmp1 = off;
+
+ off += _bursts(dry_run, &buf[off], pxs, cyc);
+
+ lpend.cond = ALWAYS;
+ lpend.forever = false;
+ lpend.loop = 1;
+ lpend.bjump = off - ljmp1;
+ off += _emit_LPEND(dry_run, &buf[off], &lpend);
+
+ if (lcnt0) {
+ lpend.cond = ALWAYS;
+ lpend.forever = false;
+ lpend.loop = 0;
+ lpend.bjump = off - ljmp0;
+ off += _emit_LPEND(dry_run, &buf[off], &lpend);
+ }
+
+ *bursts = lcnt1 * cyc;
+ if (lcnt0)
+ *bursts *= lcnt0;
+
+ return off;
+ }
+
+ static inline int _setup_loops(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs)
+ {
+ struct pl330_xfer *x = pxs->x;
+ u32 ccr = pxs->ccr;
+ unsigned long c, bursts = BYTE_TO_BURST(x->bytes, ccr);
+ int off = 0;
+
+ while (bursts) {
+ c = bursts;
+ off += _loop(dry_run, &buf[off], &c, pxs);
+ bursts -= c;
+ }
+
+ return off;
+ }
+
+ static inline int _setup_xfer(unsigned dry_run, u8 buf[],
+ const struct _xfer_spec *pxs)
+ {
+ struct pl330_xfer *x = pxs->x;
+ int off = 0;
+
+ /* DMAMOV SAR, x->src_addr */
+ off += _emit_MOV(dry_run, &buf[off], SAR, x->src_addr);
+ /* DMAMOV DAR, x->dst_addr */
+ off += _emit_MOV(dry_run, &buf[off], DAR, x->dst_addr);
+
+ /* Setup Loop(s) */
+ off += _setup_loops(dry_run, &buf[off], pxs);
+
+ return off;
+ }
+
+ /*
+ * A req is a sequence of one or more xfer units.
+ * Returns the number of bytes taken to setup the MC for the req.
+ */
+ static int _setup_req(unsigned dry_run, struct pl330_thread *thrd,
+ unsigned index, struct _xfer_spec *pxs)
+ {
+ struct _pl330_req *req = &thrd->req[index];
+ struct pl330_xfer *x;
+ u8 *buf = req->mc_cpu;
+ int off = 0;
+
+ PL330_DBGMC_START(req->mc_bus);
+
+ /* DMAMOV CCR, ccr */
+ off += _emit_MOV(dry_run, &buf[off], CCR, pxs->ccr);
+
+ x = pxs->r->x;
+ do {
+ /* Error if xfer length is not aligned at burst size */
+ if (x->bytes % (BRST_SIZE(pxs->ccr) * BRST_LEN(pxs->ccr)))
+ return -EINVAL;
+
+ pxs->x = x;
+ off += _setup_xfer(dry_run, &buf[off], pxs);
+
+ x = x->next;
+ } while (x);
+
+ /* DMASEV peripheral/event */
+ off += _emit_SEV(dry_run, &buf[off], thrd->ev);
+ /* DMAEND */
+ off += _emit_END(dry_run, &buf[off]);
+
+ return off;
+ }
+
+ static inline u32 _prepare_ccr(const struct pl330_reqcfg *rqc)
+ {
+ u32 ccr = 0;
+
+ if (rqc->src_inc)
+ ccr |= CC_SRCINC;
+
+ if (rqc->dst_inc)
+ ccr |= CC_DSTINC;
+
+ /* We set same protection levels for Src and DST for now */
+ if (rqc->privileged)
+ ccr |= CC_SRCPRI | CC_DSTPRI;
+ if (rqc->nonsecure)
+ ccr |= CC_SRCNS | CC_DSTNS;
+ if (rqc->insnaccess)
+ ccr |= CC_SRCIA | CC_DSTIA;
+
+ ccr |= (((rqc->brst_len - 1) & 0xf) << CC_SRCBRSTLEN_SHFT);
+ ccr |= (((rqc->brst_len - 1) & 0xf) << CC_DSTBRSTLEN_SHFT);
+
+ ccr |= (rqc->brst_size << CC_SRCBRSTSIZE_SHFT);
+ ccr |= (rqc->brst_size << CC_DSTBRSTSIZE_SHFT);
+
+ ccr |= (rqc->scctl << CC_SRCCCTRL_SHFT);
+ ccr |= (rqc->dcctl << CC_DSTCCTRL_SHFT);
+
+ ccr |= (rqc->swap << CC_SWAP_SHFT);
+
+ return ccr;
+ }
+
+ static inline bool _is_valid(u32 ccr)
+ {
+ enum pl330_dstcachectrl dcctl;
+ enum pl330_srccachectrl scctl;
+
+ dcctl = (ccr >> CC_DSTCCTRL_SHFT) & CC_DRCCCTRL_MASK;
+ scctl = (ccr >> CC_SRCCCTRL_SHFT) & CC_SRCCCTRL_MASK;
+
+ if (dcctl == DINVALID1 || dcctl == DINVALID2
+ || scctl == SINVALID1 || scctl == SINVALID2)
+ return false;
+ else
+ return true;
+ }
+
+ /*
+ * Submit a list of xfers after which the client wants notification.
+ * Client is not notified after each xfer unit, just once after all
+ * xfer units are done or some error occurs.
+ */
+ static int pl330_submit_req(void *ch_id, struct pl330_req *r)
+ {
+ struct pl330_thread *thrd = ch_id;
+ struct pl330_dmac *pl330;
+ struct pl330_info *pi;
+ struct _xfer_spec xs;
+ unsigned long flags;
+ void __iomem *regs;
+ unsigned idx;
+ u32 ccr;
+ int ret = 0;
+
+ /* No Req or Unacquired Channel or DMAC */
+ if (!r || !thrd || thrd->free)
+ return -EINVAL;
+
+ pl330 = thrd->dmac;
+ pi = pl330->pinfo;
+ regs = pi->base;
+
+ if (pl330->state == DYING
+ || pl330->dmac_tbd.reset_chan & (1 << thrd->id)) {
+ dev_info(thrd->dmac->pinfo->dev, "%s:%d\n",
+ __func__, __LINE__);
+ return -EAGAIN;
+ }
+
+ /* If request for non-existing peripheral */
+ if (r->rqtype != MEMTOMEM && r->peri >= pi->pcfg.num_peri) {
+ dev_info(thrd->dmac->pinfo->dev,
+ "%s:%d Invalid peripheral(%u)!\n",
+ __func__, __LINE__, r->peri);
+ return -EINVAL;
+ }
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ if (_queue_full(thrd)) {
+ ret = -EAGAIN;
+ goto xfer_exit;
+ }
+
+ /* Prefer Secure Channel */
+ if (!_manager_ns(thrd))
+ r->cfg->nonsecure = 0;
+ else
+ r->cfg->nonsecure = 1;
+
+ /* Use last settings, if not provided */
+ if (r->cfg)
+ ccr = _prepare_ccr(r->cfg);
+ else
+ ccr = readl(regs + CC(thrd->id));
+
+ /* If this req doesn't have valid xfer settings */
+ if (!_is_valid(ccr)) {
+ ret = -EINVAL;
+ dev_info(thrd->dmac->pinfo->dev, "%s:%d Invalid CCR(%x)!\n",
+ __func__, __LINE__, ccr);
+ goto xfer_exit;
+ }
+
+ idx = IS_FREE(&thrd->req[0]) ? 0 : 1;
+
+ xs.ccr = ccr;
+ xs.r = r;
+
+ /* First dry run to check if req is acceptable */
+ ret = _setup_req(1, thrd, idx, &xs);
+ if (ret < 0)
+ goto xfer_exit;
+
+ if (ret > pi->mcbufsz / 2) {
+ dev_info(thrd->dmac->pinfo->dev,
+ "%s:%d Trying increasing mcbufsz\n",
+ __func__, __LINE__);
+ ret = -ENOMEM;
+ goto xfer_exit;
+ }
+
+ /* Hook the request */
+ thrd->lstenq = idx;
+ thrd->req[idx].mc_len = _setup_req(0, thrd, idx, &xs);
+ thrd->req[idx].r = r;
+
+ ret = 0;
+
+ xfer_exit:
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ return ret;
+ }
+
+ static void pl330_dotask(unsigned long data)
+ {
+ struct pl330_dmac *pl330 = (struct pl330_dmac *) data;
+ struct pl330_info *pi = pl330->pinfo;
+ unsigned long flags;
+ int i;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ /* The DMAC itself gone nuts */
+ if (pl330->dmac_tbd.reset_dmac) {
+ pl330->state = DYING;
+ /* Reset the manager too */
+ pl330->dmac_tbd.reset_mngr = true;
+ /* Clear the reset flag */
+ pl330->dmac_tbd.reset_dmac = false;
+ }
+
+ if (pl330->dmac_tbd.reset_mngr) {
+ _stop(pl330->manager);
+ /* Reset all channels */
+ pl330->dmac_tbd.reset_chan = (1 << pi->pcfg.num_chan) - 1;
+ /* Clear the reset flag */
+ pl330->dmac_tbd.reset_mngr = false;
+ }
+
+ for (i = 0; i < pi->pcfg.num_chan; i++) {
+
+ if (pl330->dmac_tbd.reset_chan & (1 << i)) {
+ struct pl330_thread *thrd = &pl330->channels[i];
+ void __iomem *regs = pi->base;
+ enum pl330_op_err err;
+
+ _stop(thrd);
+
+ if (readl(regs + FSC) & (1 << thrd->id))
+ err = PL330_ERR_FAIL;
+ else
+ err = PL330_ERR_ABORT;
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ _callback(thrd->req[1 - thrd->lstenq].r, err);
+ _callback(thrd->req[thrd->lstenq].r, err);
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ thrd->req[0].r = NULL;
+ thrd->req[1].r = NULL;
+ mark_free(thrd, 0);
+ mark_free(thrd, 1);
+
+ /* Clear the reset flag */
+ pl330->dmac_tbd.reset_chan &= ~(1 << i);
+ }
+ }
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ return;
+ }
+
+ /* Returns 1 if state was updated, 0 otherwise */
+ static int pl330_update(const struct pl330_info *pi)
+ {
+ struct _pl330_req *rqdone;
+ struct pl330_dmac *pl330;
+ unsigned long flags;
+ void __iomem *regs;
+ u32 val;
+ int id, ev, ret = 0;
+
+ if (!pi || !pi->pl330_data)
+ return 0;
+
+ regs = pi->base;
+ pl330 = pi->pl330_data;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ val = readl(regs + FSM) & 0x1;
+ if (val)
+ pl330->dmac_tbd.reset_mngr = true;
+ else
+ pl330->dmac_tbd.reset_mngr = false;
+
+ val = readl(regs + FSC) & ((1 << pi->pcfg.num_chan) - 1);
+ pl330->dmac_tbd.reset_chan |= val;
+ if (val) {
+ int i = 0;
+ while (i < pi->pcfg.num_chan) {
+ if (val & (1 << i)) {
+ dev_info(pi->dev,
+ "Reset Channel-%d\t CS-%x FTC-%x\n",
+ i, readl(regs + CS(i)),
+ readl(regs + FTC(i)));
+ _stop(&pl330->channels[i]);
+ }
+ i++;
+ }
+ }
+
+ /* Check which event happened i.e, thread notified */
+ val = readl(regs + ES);
+ if (pi->pcfg.num_events < 32
+ && val & ~((1 << pi->pcfg.num_events) - 1)) {
+ pl330->dmac_tbd.reset_dmac = true;
+ dev_err(pi->dev, "%s:%d Unexpected!\n", __func__, __LINE__);
+ ret = 1;
+ goto updt_exit;
+ }
+
+ for (ev = 0; ev < pi->pcfg.num_events; ev++) {
+ if (val & (1 << ev)) { /* Event occurred */
+ struct pl330_thread *thrd;
+ u32 inten = readl(regs + INTEN);
+ int active;
+
+ /* Clear the event */
+ if (inten & (1 << ev))
+ writel(1 << ev, regs + INTCLR);
+
+ ret = 1;
+
+ id = pl330->events[ev];
+
+ thrd = &pl330->channels[id];
+
+ active = thrd->req_running;
+ if (active == -1) /* Aborted */
+ continue;
+
+ rqdone = &thrd->req[active];
+ mark_free(thrd, active);
+
+ /* Get going again ASAP */
+ _start(thrd);
+
+ /* For now, just make a list of callbacks to be done */
+ list_add_tail(&rqdone->rqd, &pl330->req_done);
+ }
+ }
+
+ /* Now that we are in no hurry, do the callbacks */
+ while (!list_empty(&pl330->req_done)) {
+ struct pl330_req *r;
+
+ rqdone = container_of(pl330->req_done.next,
+ struct _pl330_req, rqd);
+
+ list_del_init(&rqdone->rqd);
+
+ /* Detach the req */
+ r = rqdone->r;
+ rqdone->r = NULL;
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+ _callback(r, PL330_ERR_NONE);
+ spin_lock_irqsave(&pl330->lock, flags);
+ }
+
+ updt_exit:
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ if (pl330->dmac_tbd.reset_dmac
+ || pl330->dmac_tbd.reset_mngr
+ || pl330->dmac_tbd.reset_chan) {
+ ret = 1;
+ tasklet_schedule(&pl330->tasks);
+ }
+
+ return ret;
+ }
+
+ static int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
+ {
+ struct pl330_thread *thrd = ch_id;
+ struct pl330_dmac *pl330;
+ unsigned long flags;
- int ret = 0, active = thrd->req_running;
++ int ret = 0, active;
+
+ if (!thrd || thrd->free || thrd->dmac->state == DYING)
+ return -EINVAL;
+
+ pl330 = thrd->dmac;
++ active = thrd->req_running;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ switch (op) {
+ case PL330_OP_FLUSH:
+ /* Make sure the channel is stopped */
+ _stop(thrd);
+
+ thrd->req[0].r = NULL;
+ thrd->req[1].r = NULL;
+ mark_free(thrd, 0);
+ mark_free(thrd, 1);
+ break;
+
+ case PL330_OP_ABORT:
+ /* Make sure the channel is stopped */
+ _stop(thrd);
+
+ /* ABORT is only for the active req */
+ if (active == -1)
+ break;
+
+ thrd->req[active].r = NULL;
+ mark_free(thrd, active);
+
+ /* Start the next */
+ case PL330_OP_START:
+ if ((active == -1) && !_start(thrd))
+ ret = -EIO;
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+ return ret;
+ }
+
+ /* Reserve an event */
+ static inline int _alloc_event(struct pl330_thread *thrd)
+ {
+ struct pl330_dmac *pl330 = thrd->dmac;
+ struct pl330_info *pi = pl330->pinfo;
+ int ev;
+
+ for (ev = 0; ev < pi->pcfg.num_events; ev++)
+ if (pl330->events[ev] == -1) {
+ pl330->events[ev] = thrd->id;
+ return ev;
+ }
+
+ return -1;
+ }
+
+ static bool _chan_ns(const struct pl330_info *pi, int i)
+ {
+ return pi->pcfg.irq_ns & (1 << i);
+ }
+
+ /* Upon success, returns IdentityToken for the
+ * allocated channel, NULL otherwise.
+ */
+ static void *pl330_request_channel(const struct pl330_info *pi)
+ {
+ struct pl330_thread *thrd = NULL;
+ struct pl330_dmac *pl330;
+ unsigned long flags;
+ int chans, i;
+
+ if (!pi || !pi->pl330_data)
+ return NULL;
- #define NR_DEFAULT_DESC 16
+ pl330 = pi->pl330_data;
+
+ if (pl330->state == DYING)
+ return NULL;
+
+ chans = pi->pcfg.num_chan;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+
+ for (i = 0; i < chans; i++) {
+ thrd = &pl330->channels[i];
+ if ((thrd->free) && (!_manager_ns(thrd) ||
+ _chan_ns(pi, i))) {
+ thrd->ev = _alloc_event(thrd);
+ if (thrd->ev >= 0) {
+ thrd->free = false;
+ thrd->lstenq = 1;
+ thrd->req[0].r = NULL;
+ mark_free(thrd, 0);
+ thrd->req[1].r = NULL;
+ mark_free(thrd, 1);
+ break;
+ }
+ }
+ thrd = NULL;
+ }
+
+ spin_unlock_irqrestore(&pl330->lock, flags);
+
+ return thrd;
+ }
+
+ /* Release an event */
+ static inline void _free_event(struct pl330_thread *thrd, int ev)
+ {
+ struct pl330_dmac *pl330 = thrd->dmac;
+ struct pl330_info *pi = pl330->pinfo;
+
+ /* If the event is valid and was held by the thread */
+ if (ev >= 0 && ev < pi->pcfg.num_events
+ && pl330->events[ev] == thrd->id)
+ pl330->events[ev] = -1;
+ }
+
+ static void pl330_release_channel(void *ch_id)
+ {
+ struct pl330_thread *thrd = ch_id;
+ struct pl330_dmac *pl330;
+ unsigned long flags;
+
+ if (!thrd || thrd->free)
+ return;
+
+ _stop(thrd);
+
+ _callback(thrd->req[1 - thrd->lstenq].r, PL330_ERR_ABORT);
+ _callback(thrd->req[thrd->lstenq].r, PL330_ERR_ABORT);
+
+ pl330 = thrd->dmac;
+
+ spin_lock_irqsave(&pl330->lock, flags);
+ _free_event(thrd, thrd->ev);
+ thrd->free = true;
+ spin_unlock_irqrestore(&pl330->lock, flags);
+ }
+
+ /* Initialize the structure for PL330 configuration, that can be used
+ * by the client driver the make best use of the DMAC
+ */
+ static void read_dmac_config(struct pl330_info *pi)
+ {
+ void __iomem *regs = pi->base;
+ u32 val;
+
+ val = readl(regs + CRD) >> CRD_DATA_WIDTH_SHIFT;
+ val &= CRD_DATA_WIDTH_MASK;
+ pi->pcfg.data_bus_width = 8 * (1 << val);
+
+ val = readl(regs + CRD) >> CRD_DATA_BUFF_SHIFT;
+ val &= CRD_DATA_BUFF_MASK;
+ pi->pcfg.data_buf_dep = val + 1;
+
+ val = readl(regs + CR0) >> CR0_NUM_CHANS_SHIFT;
+ val &= CR0_NUM_CHANS_MASK;
+ val += 1;
+ pi->pcfg.num_chan = val;
+
+ val = readl(regs + CR0);
+ if (val & CR0_PERIPH_REQ_SET) {
+ val = (val >> CR0_NUM_PERIPH_SHIFT) & CR0_NUM_PERIPH_MASK;
+ val += 1;
+ pi->pcfg.num_peri = val;
+ pi->pcfg.peri_ns = readl(regs + CR4);
+ } else {
+ pi->pcfg.num_peri = 0;
+ }
+
+ val = readl(regs + CR0);
+ if (val & CR0_BOOT_MAN_NS)
+ pi->pcfg.mode |= DMAC_MODE_NS;
+ else
+ pi->pcfg.mode &= ~DMAC_MODE_NS;
+
+ val = readl(regs + CR0) >> CR0_NUM_EVENTS_SHIFT;
+ val &= CR0_NUM_EVENTS_MASK;
+ val += 1;
+ pi->pcfg.num_events = val;
+
+ pi->pcfg.irq_ns = readl(regs + CR3);
+
+ pi->pcfg.periph_id = get_id(pi, PERIPH_ID);
+ pi->pcfg.pcell_id = get_id(pi, PCELL_ID);
+ }
+
+ static inline void _reset_thread(struct pl330_thread *thrd)
+ {
+ struct pl330_dmac *pl330 = thrd->dmac;
+ struct pl330_info *pi = pl330->pinfo;
+
+ thrd->req[0].mc_cpu = pl330->mcode_cpu
+ + (thrd->id * pi->mcbufsz);
+ thrd->req[0].mc_bus = pl330->mcode_bus
+ + (thrd->id * pi->mcbufsz);
+ thrd->req[0].r = NULL;
+ mark_free(thrd, 0);
+
+ thrd->req[1].mc_cpu = thrd->req[0].mc_cpu
+ + pi->mcbufsz / 2;
+ thrd->req[1].mc_bus = thrd->req[0].mc_bus
+ + pi->mcbufsz / 2;
+ thrd->req[1].r = NULL;
+ mark_free(thrd, 1);
+ }
+
+ static int dmac_alloc_threads(struct pl330_dmac *pl330)
+ {
+ struct pl330_info *pi = pl330->pinfo;
+ int chans = pi->pcfg.num_chan;
+ struct pl330_thread *thrd;
+ int i;
+
+ /* Allocate 1 Manager and 'chans' Channel threads */
+ pl330->channels = kzalloc((1 + chans) * sizeof(*thrd),
+ GFP_KERNEL);
+ if (!pl330->channels)
+ return -ENOMEM;
+
+ /* Init Channel threads */
+ for (i = 0; i < chans; i++) {
+ thrd = &pl330->channels[i];
+ thrd->id = i;
+ thrd->dmac = pl330;
+ _reset_thread(thrd);
+ thrd->free = true;
+ }
+
+ /* MANAGER is indexed at the end */
+ thrd = &pl330->channels[chans];
+ thrd->id = chans;
+ thrd->dmac = pl330;
+ thrd->free = false;
+ pl330->manager = thrd;
+
+ return 0;
+ }
+
+ static int dmac_alloc_resources(struct pl330_dmac *pl330)
+ {
+ struct pl330_info *pi = pl330->pinfo;
+ int chans = pi->pcfg.num_chan;
+ int ret;
- enum desc_status {
- /* In the DMAC pool */
- FREE,
- /*
- * Allocted to some channel during prep_xxx
- * Also may be sitting on the work_list.
- */
- PREP,
/*
- * Sitting on the work_list and already submitted
- * to the PL330 core. Not more than two descriptors
- * of a channel can be BUSY at any time.
+ * Alloc MicroCode buffer for 'chans' Channel threads.
+ * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
*/
- BUSY,
+ pl330->mcode_cpu = dma_alloc_coherent(pi->dev,
+ chans * pi->mcbufsz,
+ &pl330->mcode_bus, GFP_KERNEL);
+ if (!pl330->mcode_cpu) {
+ dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+ __func__, __LINE__);
+ return -ENOMEM;
+ }
+
+ ret = dmac_alloc_threads(pl330);
+ if (ret) {
+ dev_err(pi->dev, "%s:%d Can't to create channels for DMAC!\n",
+ __func__, __LINE__);
+ dma_free_coherent(pi->dev,
+ chans * pi->mcbufsz,
+ pl330->mcode_cpu, pl330->mcode_bus);
+ return ret;
+ }
+
+ return 0;
+ }
+
+ static int pl330_add(struct pl330_info *pi)
+ {
+ struct pl330_dmac *pl330;
+ void __iomem *regs;
+ int i, ret;
+
+ if (!pi || !pi->dev)
+ return -EINVAL;
+
+ /* If already added */
+ if (pi->pl330_data)
+ return -EINVAL;
+
/*
- * Sitting on the channel work_list but xfer done
- * by PL330 core
+ * If the SoC can perform reset on the DMAC, then do it
+ * before reading its configuration.
*/
- DONE,
- };
+ if (pi->dmac_reset)
+ pi->dmac_reset(pi);
- struct dma_pl330_chan {
- /* Schedule desc completion */
- struct tasklet_struct task;
+ regs = pi->base;
- /* DMA-Engine Channel */
- struct dma_chan chan;
+ /* Check if we can handle this DMAC */
+ if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL
+ || get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
+ dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
+ get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID));
+ return -EINVAL;
+ }
- /* Last completed cookie */
- dma_cookie_t completed;
+ /* Read the configuration of the DMAC */
+ read_dmac_config(pi);
- /* List of to be xfered descriptors */
- struct list_head work_list;
+ if (pi->pcfg.num_events == 0) {
+ dev_err(pi->dev, "%s:%d Can't work without events!\n",
+ __func__, __LINE__);
+ return -EINVAL;
+ }
- /* Pointer to the DMAC that manages this channel,
- * NULL if the channel is available to be acquired.
- * As the parent, this DMAC also provides descriptors
- * to the channel.
- */
- struct dma_pl330_dmac *dmac;
+ pl330 = kzalloc(sizeof(*pl330), GFP_KERNEL);
+ if (!pl330) {
+ dev_err(pi->dev, "%s:%d Can't allocate memory!\n",
+ __func__, __LINE__);
+ return -ENOMEM;
+ }
- /* To protect channel manipulation */
- spinlock_t lock;
+ /* Assign the info structure and private data */
+ pl330->pinfo = pi;
+ pi->pl330_data = pl330;
- /* Token of a hardware channel thread of PL330 DMAC
- * NULL if the channel is available to be acquired.
- */
- void *pl330_chid;
+ spin_lock_init(&pl330->lock);
- /* For D-to-M and M-to-D channels */
- int burst_sz; /* the peripheral fifo width */
- int burst_len; /* the number of burst */
- dma_addr_t fifo_addr;
+ INIT_LIST_HEAD(&pl330->req_done);
- /* for cyclic capability */
- bool cyclic;
- };
+ /* Use default MC buffer size if not provided */
+ if (!pi->mcbufsz)
+ pi->mcbufsz = MCODE_BUFF_PER_REQ * 2;
- struct dma_pl330_dmac {
- struct pl330_info pif;
+ /* Mark all events as free */
+ for (i = 0; i < pi->pcfg.num_events; i++)
+ pl330->events[i] = -1;
- /* DMA-Engine Device */
- struct dma_device ddma;
+ /* Allocate resources needed by the DMAC */
+ ret = dmac_alloc_resources(pl330);
+ if (ret) {
+ dev_err(pi->dev, "Unable to create channels for DMAC\n");
+ kfree(pl330);
+ return ret;
+ }
- /* Pool of descriptors available for the DMAC's channels */
- struct list_head desc_pool;
- /* To protect desc_pool manipulation */
- spinlock_t pool_lock;
+ tasklet_init(&pl330->tasks, pl330_dotask, (unsigned long) pl330);
- /* Peripheral channels connected to this DMAC */
- struct dma_pl330_chan *peripherals; /* keep at end */
+ pl330->state = INIT;
- struct clk *clk;
- };
+ return 0;
+ }
- struct dma_pl330_desc {
- /* To attach to a queue as child */
- struct list_head node;
+ static int dmac_free_threads(struct pl330_dmac *pl330)
+ {
+ struct pl330_info *pi = pl330->pinfo;
+ int chans = pi->pcfg.num_chan;
+ struct pl330_thread *thrd;
+ int i;
- /* Descriptor for the DMA Engine API */
- struct dma_async_tx_descriptor txd;
+ /* Release Channel threads */
+ for (i = 0; i < chans; i++) {
+ thrd = &pl330->channels[i];
+ pl330_release_channel((void *)thrd);
+ }
- /* Xfer for PL330 core */
- struct pl330_xfer px;
+ /* Free memory */
+ kfree(pl330->channels);
- struct pl330_reqcfg rqcfg;
- struct pl330_req req;
+ return 0;
+ }
- enum desc_status status;
+ static void dmac_free_resources(struct pl330_dmac *pl330)
+ {
+ struct pl330_info *pi = pl330->pinfo;
+ int chans = pi->pcfg.num_chan;
- /* The channel which currently holds this desc */
- struct dma_pl330_chan *pchan;
- };
+ dmac_free_threads(pl330);
+
+ dma_free_coherent(pi->dev, chans * pi->mcbufsz,
+ pl330->mcode_cpu, pl330->mcode_bus);
+ }
+
+ static void pl330_del(struct pl330_info *pi)
+ {
+ struct pl330_dmac *pl330;
+
+ if (!pi || !pi->pl330_data)
+ return;
+
+ pl330 = pi->pl330_data;
+
+ pl330->state = UNINIT;
+
+ tasklet_kill(&pl330->tasks);
+
+ /* Free DMAC resources */
+ dmac_free_resources(pl330);
+
+ kfree(pl330);
+ pi->pl330_data = NULL;
+ }
/* forward declaration */
static struct amba_driver pl330_driver;
projects / cascardo / linux.git / commitdiff