ARM: S3C24XX: Remove omitted Kconfig selects and conditionals

After full migration of s3c24xx to Common Clock Framework, some unneeded
entries in Kconfig still remained. Delete them.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>

diff --git a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
index 0b64ad8..822505e 100644 (file)
--- a/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
+++ b/Documentation/devicetree/bindings/clock/samsung,s3c2410-clock.txt
@@ -19,7 +19,7 @@ to specify the clock which they consume. Some of the clocks are available only
 on a particular SoC.
 
 All available clocks are defined as preprocessor macros in
-dt-bindings/clock/samsung,s3c2410-clock.h header and can be used in device
+dt-bindings/clock/s3c2410.h header and can be used in device
 tree sources.
 
 External clocks:

diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 1331e78..ab2866b 100644 (file)
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -264,7 +264,7 @@ config ARCH_BAST
        bool "Simtec Electronics BAST (EB2410ITX)"
        select ISA
        select MACH_BAST_IDE
-       select S3C2410_COMMON_DCLK if COMMON_CLK
+       select S3C2410_COMMON_DCLK
        select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
        select S3C24XX_SIMTEC_NOR
        select S3C24XX_SIMTEC_PM if PM
@@ -346,8 +346,7 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
        bool "Thorcom VR1000"
        select MACH_BAST_IDE
-       select S3C2410_COMMON_DCLK if COMMON_CLK
-       select S3C24XX_DCLK if SAMSUNG_CLOCK
+       select S3C2410_COMMON_DCLK
        select S3C24XX_SIMTEC_NOR
        select S3C24XX_SIMTEC_PM if PM
        select S3C24XX_SIMTEC_USB
@@ -531,7 +530,7 @@ comment "S3C2440 Boards"
 config MACH_ANUBIS
        bool "Simtec Electronics ANUBIS"
        select HAVE_PATA_PLATFORM
-       select S3C2410_COMMON_DCLK if COMMON_CLK
+       select S3C2410_COMMON_DCLK
        select S3C2440_XTAL_12000000
        select S3C24XX_SIMTEC_PM if PM
        select S3C_DEV_USB_HOST
@@ -570,7 +569,7 @@ config MACH_NEXCODER_2440
 
 config MACH_OSIRIS
        bool "Simtec IM2440D20 (OSIRIS) module"
-       select S3C2410_COMMON_DCLK if COMMON_CLK
+       select S3C2410_COMMON_DCLK
        select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
        select S3C2440_XTAL_12000000
        select S3C24XX_SIMTEC_PM if PM
@@ -641,10 +640,9 @@ config MACH_RX1950
        bool "HP iPAQ rx1950"
        select I2C
        select PM_H1940 if PM
-       select S3C2410_COMMON_DCLK if COMMON_CLK
+       select S3C2410_COMMON_DCLK
        select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
        select S3C2440_XTAL_16934400
-       select S3C24XX_DCLK if SAMSUNG_CLOCK
        select S3C24XX_PWM
        select S3C_DEV_NAND
        help