i40e: limit WoL and link settings to partition 1

When in multi-function mode, e.g. Dell's NPAR, only partition 1
of each MAC is allowed to set WoL, speed, and flow control.

Change-ID: I87a9debc7479361c55a71f0120294ea319f23588
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 951e876..b8230dc 100644 (file)
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -218,6 +218,16 @@ static const char i40e_gstrings_test[][ETH_GSTRING_LEN] = {
 
 #define I40E_TEST_LEN (sizeof(i40e_gstrings_test) / ETH_GSTRING_LEN)
 
+/**
+ * i40e_partition_setting_complaint - generic complaint for MFP restriction
+ * @pf: the PF struct
+ **/
+static void i40e_partition_setting_complaint(struct i40e_pf *pf)
+{
+       dev_info(&pf->pdev->dev,
+                "The link settings are allowed to be changed only from the first partition of a given port. Please switch to the first partition in order to change the setting.\n");
+}
+
 /**
  * i40e_get_settings - Get Link Speed and Duplex settings
  * @netdev: network interface device structure
@@ -485,6 +495,14 @@ static int i40e_set_settings(struct net_device *netdev,
        u8 autoneg;
        u32 advertise;
 
+       /* Changing port settings is not supported if this isn't the
+        * port's controlling PF
+        */
+       if (hw->partition_id != 1) {
+               i40e_partition_setting_complaint(pf);
+               return -EOPNOTSUPP;
+       }
+
        if (vsi != pf->vsi[pf->lan_vsi])
                return -EOPNOTSUPP;
 
@@ -687,6 +705,14 @@ static int i40e_set_pauseparam(struct net_device *netdev,
        u8 aq_failures;
        int err = 0;
 
+       /* Changing the port's flow control is not supported if this isn't the
+        * port's controlling PF
+        */
+       if (hw->partition_id != 1) {
+               i40e_partition_setting_complaint(pf);
+               return -EOPNOTSUPP;
+       }
+
        if (vsi != pf->vsi[pf->lan_vsi])
                return -EOPNOTSUPP;
 
@@ -1503,7 +1529,7 @@ static void i40e_get_wol(struct net_device *netdev,
 
        /* NVM bit on means WoL disabled for the port */
        i40e_read_nvm_word(hw, I40E_SR_NVM_WAKE_ON_LAN, &wol_nvm_bits);
-       if ((1 << hw->port) & wol_nvm_bits) {
+       if ((1 << hw->port) & wol_nvm_bits || hw->partition_id != 1) {
                wol->supported = 0;
                wol->wolopts = 0;
        } else {
@@ -1512,13 +1538,28 @@ static void i40e_get_wol(struct net_device *netdev,
        }
 }
 
+/**
+ * i40e_set_wol - set the WakeOnLAN configuration
+ * @netdev: the netdev in question
+ * @wol: the ethtool WoL setting data
+ **/
 static int i40e_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
 {
        struct i40e_netdev_priv *np = netdev_priv(netdev);
        struct i40e_pf *pf = np->vsi->back;
+       struct i40e_vsi *vsi = np->vsi;
        struct i40e_hw *hw = &pf->hw;
        u16 wol_nvm_bits;
 
+       /* WoL not supported if this isn't the controlling PF on the port */
+       if (hw->partition_id != 1) {
+               i40e_partition_setting_complaint(pf);
+               return -EOPNOTSUPP;
+       }
+
+       if (vsi != pf->vsi[pf->lan_vsi])
+               return -EOPNOTSUPP;
+
        /* NVM bit on means WoL disabled for the port */
        i40e_read_nvm_word(hw, I40E_SR_NVM_WAKE_ON_LAN, &wol_nvm_bits);
        if (((1 << hw->port) & wol_nvm_bits))