# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
-# Do not:
-# o use make's built-in rules and variables
-# (this increases performance and avoids hard-to-debug behaviour);
-# o print "Entering directory ...";
-MAKEFLAGS += -rR --no-print-directory
+# Do not use make's built-in rules and variables
+# (this increases performance and avoids hard-to-debug behaviour);
+MAKEFLAGS += -rR
# Avoid funny character set dependencies
unexport LC_ALL
export quiet Q KBUILD_VERBOSE
-# Call a source code checker (by default, "sparse") as part of the
-# C compilation.
-#
-# Use 'make C=1' to enable checking of only re-compiled files.
-# Use 'make C=2' to enable checking of *all* source files, regardless
-# of whether they are re-compiled or not.
-#
-# See the file "Documentation/sparse.txt" for more details, including
-# where to get the "sparse" utility.
-
-ifeq ("$(origin C)", "command line")
- KBUILD_CHECKSRC = $(C)
-endif
-ifndef KBUILD_CHECKSRC
- KBUILD_CHECKSRC = 0
-endif
-
-# Use make M=dir to specify directory of external module to build
-# Old syntax make ... SUBDIRS=$PWD is still supported
-# Setting the environment variable KBUILD_EXTMOD take precedence
-ifdef SUBDIRS
- KBUILD_EXTMOD ?= $(SUBDIRS)
-endif
-
-ifeq ("$(origin M)", "command line")
- KBUILD_EXTMOD := $(M)
-endif
-
# kbuild supports saving output files in a separate directory.
# To locate output files in a separate directory two syntaxes are supported.
# In both cases the working directory must be the root of the kernel src.
# The O= assignment takes precedence over the KBUILD_OUTPUT environment
# variable.
-
# KBUILD_SRC is set on invocation of make in OBJ directory
# KBUILD_SRC is not intended to be used by the regular user (for now)
ifeq ($(KBUILD_SRC),)
$(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
@:
-# Fake the "Entering directory" message once, so that IDEs/editors are
-# able to understand relative filenames.
- echodir := @echo
- quiet_echodir := @echo
-silent_echodir := @:
sub-make: FORCE
- $($(quiet)echodir) "make[1]: Entering directory \`$(KBUILD_OUTPUT)'"
- $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
- KBUILD_SRC=$(CURDIR) \
- KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
- $(filter-out _all sub-make,$(MAKECMDGOALS))
+ $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
+ -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
# Leave processing to above invocation of make
skip-makefile := 1
# We process the rest of the Makefile if this is the final invocation of make
ifeq ($(skip-makefile),)
+# Do not print "Entering directory ...",
+# but we want to display it when entering to the output directory
+# so that IDEs/editors are able to understand relative filenames.
+MAKEFLAGS += --no-print-directory
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+ KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+ KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+ KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+ KBUILD_EXTMOD := $(M)
+endif
+
# If building an external module we do not care about the all: rule
# but instead _all depend on modules
PHONY += all
$(net-y) $(net-m) $(libs-y) $(libs-m)))
vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
- $(init-n) $(init-) \
- $(core-n) $(core-) $(drivers-n) $(drivers-) \
- $(net-n) $(net-) $(libs-n) $(libs-))))
+ $(init-) $(core-) $(drivers-) $(net-) $(libs-))))
init-y := $(patsubst %/, %/built-in.o, $(init-y))
core-y := $(patsubst %/, %/built-in.o, $(core-y))
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+clean := -f $(srctree)/scripts/Makefile.clean obj
endif # skip-makefile
LD += -EL
endif
-comma = ,
-
# This selects which instruction set is used.
# Note that GCC does not numerically define an architecture version
# macro, but instead defines a whole series of macros which makes
#
obj-y := gpio.o setup.o sysirq_mask.o
-obj-m :=
-obj-n :=
-obj- :=
obj-$(CONFIG_OLD_IRQ_AT91) += irq.o
obj-$(CONFIG_OLD_CLK_AT91) += clock.o
# Object file lists.
obj-y := core.o io.o leds.o
-obj-m :=
-obj-n :=
-obj- :=
# Makefile for the linux kernel.
#
obj-y := core.o clock.o
-obj-m :=
-obj-n :=
-obj- :=
obj-$(CONFIG_EP93XX_DMA) += dma.o
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
# Core
obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o
# Object file lists.
obj-y := common.o dma.o isa-irq.o
-obj-m :=
-obj-n :=
-obj- :=
pci-y += dc21285.o
pci-$(CONFIG_ARCH_CATS) += cats-pci.o
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
obj-$(CONFIG_ARCH_IOP13XX) += setup.o
obj-$(CONFIG_ARCH_IOP13XX) += irq.o
obj-$(CONFIG_ARCH_IOP13XX) += pci.o
#
obj-y := irq.o
-obj-m :=
-obj-n :=
-obj- :=
obj-$(CONFIG_MACH_GLANTANK) += glantank.o
obj-$(CONFIG_ARCH_IQ80321) += iq80321.o
#
obj-y := irq.o uart.o
-obj-m :=
-obj-n :=
-obj- :=
obj-$(CONFIG_ARCH_IQ80331) += iq80331.o
obj-$(CONFIG_MACH_IQ80332) += iq80332.o
#
obj-y := cpu.o irq.o time.o devices.o
-obj-m :=
-obj-n :=
-obj- :=
# PCI support is optional
obj-$(CONFIG_PCI) += pci.o
# Object file lists.
obj-y := dma.o ecard.o fiq.o irq.o riscpc.o time.o
-obj-m :=
-obj-n :=
-obj- :=
-
#
# Licensed under GPLv2
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
# core
obj-y += common.o
#
# Licensed under GPLv2
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
# Core
obj-y += common.o
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) += -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
-obj-y :=
-obj-m :=
-obj-n :=
-obj- :=
-
# Core
obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
# Common support
obj-y := clock.o generic.o irq.o time.o #nmi-oopser.o
-obj-m :=
-obj-n :=
-obj- :=
# Specific board support
obj-$(CONFIG_SA1100_ASSABET) += assabet.o
#
obj-y := core.o
-obj-m :=
-obj-n :=
-obj- :=
obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
obj-$(CONFIG_REGULATOR_AB3100) += regulator.o
# Makefile for the linux kernel.
#
-obj-y :=
-
# IOP32X
obj-$(CONFIG_ARCH_IOP32X) += i2c.o
obj-$(CONFIG_ARCH_IOP32X) += pci.o
# IOP13XX
obj-$(CONFIG_ARCH_IOP13XX) += cp6.o
obj-$(CONFIG_ARCH_IOP13XX) += time.o
-
-obj-m :=
-obj-n :=
-obj- :=
# Common support
obj-y := sram.o dma.o counter_32k.o
-obj-m :=
-obj-n :=
-obj- :=
# omap_device support (OMAP2+ only at the moment)
ccflags-$(CONFIG_ARCH_MULTI_V7) += -I$(srctree)/$(src)/include
-obj-y :=
-obj-m :=
-obj-n := dummy.o
-obj- :=
-
# Objects we always build independent of SoC choice
obj-y += init.o cpu.o
LD += -EL
endif
-comma = ,
-
CHECKFLAGS += -D__aarch64__
# Default value
obj-$(CONFIG_ARCH_R8A7794) += clk-rcar-gen2.o
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o
obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o
-# for emply built-in.o
-obj-n := dummy
-
obj-$(CONFIG_WIMAX_I2400M) += i2400m/
-
-# (from Sam Ravnborg) force kbuild to create built-in.o
-obj- := dummy.o
# Without this, built-in.o won't be created when it's empty, and the
# final vmlinux link will fail.
-obj-n := dummy
+obj- := dummy
hostprogs-y := ihex2fw
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
# Usage:
# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
+build := -f $(srctree)/scripts/Makefile.build obj
###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj=
# Usage:
# $(Q)$(MAKE) $(modbuiltin)=dir
-modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj
+modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj
# Prefix -I with $(srctree) if it is not an absolute path.
# skip if -I has no parameter
# ===========================================================================
-ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),)
+ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
lib-target := $(obj)/lib.a
endif
-ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),)
+ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
builtin-target := $(obj)/built-in.o
endif
quiet_cmd_link_multi-m = LD [M] $@
cmd_link_multi-m = $(cmd_link_multi-y)
-# We would rather have a list of rules like
-# foo.o: $(foo-objs)
-# but that's not so easy, so we rather make all composite objects depend
-# on the set of all their parts
-$(multi-used-y) : %.o: $(multi-objs-y) FORCE
+$(multi-used-y): FORCE
$(call if_changed,link_multi-y)
+$(call multi_depend, $(multi-used-y), .o, -objs -y)
-$(multi-used-m) : %.o: $(multi-objs-m) FORCE
+$(multi-used-m): FORCE
$(call if_changed,link_multi-m)
@{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
+$(call multi_depend, $(multi-used-m), .o, -objs -y)
targets += $(multi-used-y) $(multi-used-m)
# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+clean := -f $(srctree)/scripts/Makefile.clean obj
# The filename Kbuild has precedence over Makefile
kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
subdir-y += $(__subdir-y)
__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
subdir-m += $(__subdir-m)
-__subdir-n := $(patsubst %/,%,$(filter %/, $(obj-n)))
-subdir-n += $(__subdir-n)
__subdir- := $(patsubst %/,%,$(filter %/, $(obj-)))
subdir- += $(__subdir-)
# Subdirectories we need to descend into
subdir-ym := $(sort $(subdir-y) $(subdir-m))
-subdir-ymn := $(sort $(subdir-ym) $(subdir-n) $(subdir-))
+subdir-ymn := $(sort $(subdir-ym) $(subdir-))
# Add subdir path
# Installing firmware
#
# We don't include the .config, so all firmware files are in $(fw-shipped-)
-# rather than in $(fw-shipped-y) or $(fw-shipped-n).
+# rather than in $(fw-shipped-y) or $(fw-shipped-m).
# ==========================================================================
INSTALL := install
cmd_host-cmulti = $(HOSTCC) $(HOSTLDFLAGS) -o $@ \
$(addprefix $(obj)/,$($(@F)-objs)) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cmulti): $(obj)/%: $(host-cobjs) FORCE
+$(host-cmulti): FORCE
$(call if_changed,host-cmulti)
+$(call multi_depend, $(host-cmulti), , -objs)
# Create .o file from a single .c file
# host-cobjs -> .o
$(foreach o,objs cxxobjs,\
$(addprefix $(obj)/,$($(@F)-$(o)))) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) FORCE
+$(host-cxxmulti): FORCE
$(call if_changed,host-cxxmulti)
+$(call multi_depend, $(host-cxxmulti), , -objs -cxxobjs)
# Create .o file from a single .cc (C++) file
quiet_cmd_host-cxxobjs = HOSTCXX $@
modname-multi = $(sort $(foreach m,$(multi-used),\
$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
+# Useful for describing the dependency of composite objects
+# Usage:
+# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
+define multi_depend
+$(foreach m, $(notdir $1), \
+ $(eval $(obj)/$m: \
+ $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
+endef
+
ifdef REGENERATE_PARSERS
# GPERF
qconf-objs := zconf.tab.o
gconf-objs := gconf.o zconf.tab.o
-hostprogs-y := conf
-
-ifeq ($(MAKECMDGOALS),nconfig)
- hostprogs-y += nconf
-endif
-
-ifeq ($(MAKECMDGOALS),menuconfig)
- hostprogs-y += mconf
-endif
-
-ifeq ($(MAKECMDGOALS),update-po-config)
- hostprogs-y += kxgettext
-endif
-
-ifeq ($(MAKECMDGOALS),xconfig)
- qconf-target := 1
-endif
-ifeq ($(MAKECMDGOALS),gconfig)
- gconf-target := 1
-endif
-
-
-ifeq ($(qconf-target),1)
- hostprogs-y += qconf
-endif
-
-ifeq ($(gconf-target),1)
- hostprogs-y += gconf
-endif
+hostprogs-y := conf nconf mconf kxgettext qconf gconf
clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck
clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h
-clean-files += mconf qconf gconf nconf
clean-files += config.pot linux.pot
# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
HOSTLOADLIBES_nconf = $(shell \
- pkg-config --libs menu panel ncurses 2>/dev/null \
+ pkg-config --libs menuw panelw ncursesw 2>/dev/null \
+ || pkg-config --libs menu panel ncurses 2>/dev/null \
|| echo "-lmenu -lpanel -lncurses" )
$(obj)/qconf.o: $(obj)/.tmp_qtcheck
-ifeq ($(qconf-target),1)
+ifeq ($(MAKECMDGOALS),xconfig)
$(obj)/.tmp_qtcheck: $(src)/Makefile
-include $(obj)/.tmp_qtcheck
$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
-ifeq ($(gconf-target),1)
+ifeq ($(MAKECMDGOALS),gconfig)
-include $(obj)/.tmp_gtkcheck
# GTK needs some extra effort, too...
# Where is ncurses.h?
ccflags()
{
- if [ -f /usr/include/ncursesw/curses.h ]; then
+ if pkg-config --cflags ncursesw 2>/dev/null; then
+ echo '-DCURSES_LOC="<ncurses.h>" -DNCURSES_WIDECHAR=1'
+ elif pkg-config --cflags ncurses 2>/dev/null; then
+ echo '-DCURSES_LOC="<ncurses.h>"'
+ elif [ -f /usr/include/ncursesw/curses.h ]; then
echo '-I/usr/include/ncursesw -DCURSES_LOC="<curses.h>"'
echo ' -DNCURSES_WIDECHAR=1'
elif [ -f /usr/include/ncurses/ncurses.h ]; then
/* item list manipulation for lxdialog use */
#define MAXITEMSTR 200
struct dialog_item {
- char str[MAXITEMSTR]; /* promtp displayed */
+ char str[MAXITEMSTR]; /* prompt displayed */
char tag;
void *data; /* pointer to menu item - used by menubox+checklist */
int selected; /* Set to 1 by dialog_*() function if selected. */
projects / cascardo / linux.git / commitdiff