ethernet: amd: dynamic debug fixes

This patch convert printk() to netdev_dbg/info/err or dev_info/err/dbg

Signed-off-by: Varka Bhadram <varkab@cdac.in>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/amd/amd8111e.c b/drivers/net/ethernet/amd/amd8111e.c
index 433107c..c322aa7 100644 (file)
--- a/drivers/net/ethernet/amd/amd8111e.c
+++ b/drivers/net/ethernet/amd/amd8111e.c
@@ -501,8 +501,7 @@ static int amd8111e_restart(struct net_device *dev)
 
        /* Enable interrupt coalesce */
        if(lp->options & OPTION_INTR_COAL_ENABLE){
-               printk(KERN_INFO "%s: Interrupt Coalescing Enabled.\n",
-                                                               dev->name);
+               netdev_info(dev, "Interrupt Coalescing Enabled.\n");
                amd8111e_set_coalesce(dev,ENABLE_COAL);
        }
 
@@ -860,16 +859,19 @@ static int amd8111e_link_change(struct net_device* dev)
                else if(speed == PHY_SPEED_100)
                        lp->link_config.speed = SPEED_100;
 
-               printk(KERN_INFO "%s: Link is Up. Speed is %s Mbps %s Duplex\n",                        dev->name,
-                      (lp->link_config.speed == SPEED_100) ? "100": "10",
-                      (lp->link_config.duplex == DUPLEX_FULL)? "Full": "Half");
+               netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n",
+                           (lp->link_config.speed == SPEED_100) ?
+                                                       "100" : "10",
+                           (lp->link_config.duplex == DUPLEX_FULL) ?
+                                                       "Full" : "Half");
+
                netif_carrier_on(dev);
        }
        else{
                lp->link_config.speed = SPEED_INVALID;
                lp->link_config.duplex = DUPLEX_INVALID;
                lp->link_config.autoneg = AUTONEG_INVALID;
-               printk(KERN_INFO "%s: Link is Down.\n",dev->name);
+               netdev_info(dev, "Link is Down.\n");
                netif_carrier_off(dev);
        }
 
@@ -1168,7 +1170,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
                        /* Schedule a polling routine */
                        __napi_schedule(&lp->napi);
                } else if (intren0 & RINTEN0) {
-                       printk("************Driver bug! interrupt while in poll\n");
+                       netdev_dbg(dev, "************Driver bug! interrupt while in poll\n");
                        /* Fix by disable receive interrupts */
                        writel(RINTEN0, mmio + INTEN0);
                }
@@ -1264,7 +1266,7 @@ static int amd8111e_open(struct net_device * dev )
        /* Start ipg timer */
        if(lp->options & OPTION_DYN_IPG_ENABLE){
                add_timer(&lp->ipg_data.ipg_timer);
-               printk(KERN_INFO "%s: Dynamic IPG Enabled.\n",dev->name);
+               netdev_info(dev, "Dynamic IPG Enabled\n");
        }
 
        lp->opened = 1;
@@ -1623,8 +1625,8 @@ static void amd8111e_tx_timeout(struct net_device *dev)
        struct amd8111e_priv* lp = netdev_priv(dev);
        int err;
 
-       printk(KERN_ERR "%s: transmit timed out, resetting\n",
-                                                     dev->name);
+       netdev_err(dev, "transmit timed out, resetting\n");
+
        spin_lock_irq(&lp->lock);
        err = amd8111e_restart(dev);
        spin_unlock_irq(&lp->lock);
@@ -1807,22 +1809,19 @@ static int amd8111e_probe_one(struct pci_dev *pdev,
 
        err = pci_enable_device(pdev);
        if(err){
-               printk(KERN_ERR "amd8111e: Cannot enable new PCI device, "
-                       "exiting.\n");
+               dev_err(&pdev->dev, "Cannot enable new PCI device\n");
                return err;
        }
 
        if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
-               printk(KERN_ERR "amd8111e: Cannot find PCI base address, "
-                      "exiting.\n");
+               dev_err(&pdev->dev, "Cannot find PCI base address\n");
                err = -ENODEV;
                goto err_disable_pdev;
        }
 
        err = pci_request_regions(pdev, MODULE_NAME);
        if(err){
-               printk(KERN_ERR "amd8111e: Cannot obtain PCI resources, "
-                      "exiting.\n");
+               dev_err(&pdev->dev, "Cannot obtain PCI resources\n");
                goto err_disable_pdev;
        }
 
@@ -1830,16 +1829,14 @@ static int amd8111e_probe_one(struct pci_dev *pdev,
 
        /* Find power-management capability. */
        if (!pdev->pm_cap) {
-               printk(KERN_ERR "amd8111e: No Power Management capability, "
-                      "exiting.\n");
+               dev_err(&pdev->dev, "No Power Management capability\n");
                err = -ENODEV;
                goto err_free_reg;
        }
 
        /* Initialize DMA */
        if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) {
-               printk(KERN_ERR "amd8111e: DMA not supported,"
-                       "exiting.\n");
+               dev_err(&pdev->dev, "DMA not supported\n");
                err = -ENODEV;
                goto err_free_reg;
        }
@@ -1868,8 +1865,7 @@ static int amd8111e_probe_one(struct pci_dev *pdev,
 
        lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len);
        if (!lp->mmio) {
-               printk(KERN_ERR "amd8111e: Cannot map device registers, "
-                      "exiting\n");
+               dev_err(&pdev->dev, "Cannot map device registers\n");
                err = -ENOMEM;
                goto err_free_dev;
        }
@@ -1911,8 +1907,7 @@ static int amd8111e_probe_one(struct pci_dev *pdev,
 
        err = register_netdev(dev);
        if (err) {
-               printk(KERN_ERR "amd8111e: Cannot register net device, "
-                      "exiting.\n");
+               dev_err(&pdev->dev, "Cannot register net device\n");
                goto err_free_dev;
        }
 
@@ -1932,16 +1927,15 @@ static int amd8111e_probe_one(struct pci_dev *pdev,
        /*  display driver and device information */
 
        chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
-       printk(KERN_INFO "%s: AMD-8111e Driver Version: %s\n",
-              dev->name,MODULE_VERS);
-       printk(KERN_INFO "%s: [ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
-              dev->name, chip_version, dev->dev_addr);
+       dev_info(&pdev->dev, "AMD-8111e Driver Version: %s\n", MODULE_VERS);
+       dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
+                chip_version, dev->dev_addr);
        if (lp->ext_phy_id)
-               printk(KERN_INFO "%s: Found MII PHY ID 0x%08x at address 0x%02x\n",
-                      dev->name, lp->ext_phy_id, lp->ext_phy_addr);
+               dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n",
+                        lp->ext_phy_id, lp->ext_phy_addr);
        else
-               printk(KERN_INFO "%s: Couldn't detect MII PHY, assuming address 0x01\n",
-                      dev->name);
+               dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n");
+
        return 0;
 
 err_free_dev: