Merge branches 'from-henrik', 'hidraw', 'logitech', 'picolcd', 'ps3', 'uclogic',...
authorJiri Kosina <jkosina@suse.cz>
Mon, 1 Oct 2012 12:36:26 +0000 (14:36 +0200)
committerJiri Kosina <jkosina@suse.cz>
Mon, 1 Oct 2012 12:36:26 +0000 (14:36 +0200)
1  2  3  4  5  6  7  8 
MAINTAINERS
drivers/hid/Kconfig
drivers/hid/Makefile
drivers/hid/hid-core.c
drivers/hid/hid-ids.h
drivers/input/mouse/sentelic.c
drivers/input/tablet/wacom_wac.c
drivers/input/touchscreen/edt-ft5x06.c

diff --cc MAINTAINERS
Simple merge
Simple merge
@@@@@@@@@ -69,7 -69,7 -69,7 -69,27 -69,8 -69,7 -69,7 -69,7 +69,28 @@@@@@@@@ obj-$(CONFIG_HID_PRODIKEYS) += hid-prod
        obj-$(CONFIG_HID_PANTHERLORD)   += hid-pl.o
        obj-$(CONFIG_HID_PETALYNX)      += hid-petalynx.o
        obj-$(CONFIG_HID_PICOLCD)       += hid-picolcd.o
+++ ++++hid-picolcd-y                   += hid-picolcd_core.o
+++ ++++ifdef CONFIG_HID_PICOLCD_FB
+++ ++++hid-picolcd-y                   += hid-picolcd_fb.o
+++ ++++endif
+++ ++++ifdef CONFIG_HID_PICOLCD_BACKLIGHT
+++ ++++hid-picolcd-y                   += hid-picolcd_backlight.o
+++ ++++endif
+++ ++++ifdef CONFIG_HID_PICOLCD_LCD
+++ ++++hid-picolcd-y                   += hid-picolcd_lcd.o
+++ ++++endif
+++ ++++ifdef CONFIG_HID_PICOLCD_LEDS
+++ ++++hid-picolcd-y                   += hid-picolcd_leds.o
+++ ++++endif
+++ ++++ifdef CONFIG_HID_PICOLCD_CIR
+++ ++++hid-picolcd-y                   += hid-picolcd_cir.o
+++ ++++endif
+++ ++++ifdef CONFIG_DEBUG_FS
+++ ++++hid-picolcd-y                   += hid-picolcd_debugfs.o
+++ ++++endif
+++ ++++
        obj-$(CONFIG_HID_PRIMAX)        += hid-primax.o
++++ +++obj-$(CONFIG_HID_PS3REMOTE)     += hid-ps3remote.o
        obj-$(CONFIG_HID_ROCCAT)        += hid-roccat.o hid-roccat-common.o \
                hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \
                hid-roccat-koneplus.o hid-roccat-kovaplus.o hid-roccat-pyra.o \
Simple merge
Simple merge
Simple merge
@@@@@@@@@ -1570,12 -1570,12 -1570,12 -1559,8 -1570,12 -1570,12 -1559,8 -1570,12 +1570,12 @@@@@@@@@ int wacom_setup_input_capabilities(stru
        
                                for (i = 0; i < features->touch_max; i++)
                                        wacom_wac->slots[i] = -1;
   +  +                 }
   +  +                 /* fall through */
        
   -  -                         input_mt_init_slots(input_dev, features->touch_max);
   +  +         case TABLETPC2FG:
   +  +                 if (features->device_type == BTN_TOOL_FINGER) {
 -- -- -                        input_mt_init_slots(input_dev, features->touch_max);
 +++++++                        input_mt_init_slots(input_dev, features->touch_max, 0);
                                input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
                                                0, MT_TOOL_MAX, 0, 0);
                                input_set_abs_params(input_dev, ABS_MT_POSITION_X,
@@@@@@@@@ -2087,11 -2090,12 -2090,12 -2062,8 -2090,12 -2087,11 -2062,8 -2087,11 +2090,12 @@@@@@@@@ const struct usb_device_id wacom_ids[] 
                { USB_DEVICE_WACOM(0xE5) },
                { USB_DEVICE_WACOM(0xE6) },
                { USB_DEVICE_WACOM(0xEC) },
   +  +         { USB_DEVICE_WACOM(0xED) },
   +  +         { USB_DEVICE_WACOM(0xEF) },
                { USB_DEVICE_WACOM(0x47) },
                { USB_DEVICE_WACOM(0xF4) },
+  + +++        { USB_DEVICE_WACOM(0xF8) },
   +  +         { USB_DEVICE_WACOM(0xFA) },
                { USB_DEVICE_LENOVO(0x6004) },
                { }
        };
index 7b786e7,6495777,6495777,0000000,6495777,9afc777,0000000,9afc777..099d144
mode 100644,100644,100644,000000,100644,100644,000000,100644..100644
--- /dev/null
--- /dev/null
@@@@@@@@@ -1,898 -1,901 -1,901 -1,0 -1,901 -1,898 -1,0 -1,898 +1,901 @@@@@@@@@
-    - -        error = copy_to_user(buf, tsdata->raw_buffer + *off, read);
-    - -        if (!error)
-    - -                *off += read;
   +  + /*
   +  +  * Copyright (C) 2012 Simon Budig, <simon.budig@kernelconcepts.de>
   +  +  *
   +  +  * This software is licensed under the terms of the GNU General Public
   +  +  * License version 2, as published by the Free Software Foundation, and
   +  +  * may be copied, distributed, and modified under those terms.
   +  +  *
   +  +  * This program is distributed in the hope that it will be useful,
   +  +  * but WITHOUT ANY WARRANTY; without even the implied warranty of
   +  +  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   +  +  * GNU General Public License for more details.
   +  +  *
   +  +  * You should have received a copy of the GNU General Public
   +  +  * License along with this library; if not, write to the Free Software
   +  +  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
   +  +  */
   +  + 
   +  + /*
   +  +  * This is a driver for the EDT "Polytouch" family of touch controllers
   +  +  * based on the FocalTech FT5x06 line of chips.
   +  +  *
   +  +  * Development of this driver has been sponsored by Glyn:
   +  +  *    http://www.glyn.com/Products/Displays
   +  +  */
   +  + 
   +  + #include <linux/module.h>
   +  + #include <linux/ratelimit.h>
   +  + #include <linux/interrupt.h>
   +  + #include <linux/input.h>
   +  + #include <linux/i2c.h>
   +  + #include <linux/uaccess.h>
   +  + #include <linux/delay.h>
   +  + #include <linux/debugfs.h>
   +  + #include <linux/slab.h>
   +  + #include <linux/gpio.h>
   +  + #include <linux/input/mt.h>
   +  + #include <linux/input/edt-ft5x06.h>
   +  + 
   +  + #define MAX_SUPPORT_POINTS              5
   +  + 
   +  + #define WORK_REGISTER_THRESHOLD         0x00
   +  + #define WORK_REGISTER_REPORT_RATE       0x08
   +  + #define WORK_REGISTER_GAIN              0x30
   +  + #define WORK_REGISTER_OFFSET            0x31
   +  + #define WORK_REGISTER_NUM_X             0x33
   +  + #define WORK_REGISTER_NUM_Y             0x34
   +  + 
   +  + #define WORK_REGISTER_OPMODE            0x3c
   +  + #define FACTORY_REGISTER_OPMODE         0x01
   +  + 
   +  + #define TOUCH_EVENT_DOWN                0x00
   +  + #define TOUCH_EVENT_UP                  0x01
   +  + #define TOUCH_EVENT_ON                  0x02
   +  + #define TOUCH_EVENT_RESERVED            0x03
   +  + 
   +  + #define EDT_NAME_LEN                    23
   +  + #define EDT_SWITCH_MODE_RETRIES         10
   +  + #define EDT_SWITCH_MODE_DELAY           5 /* msec */
   +  + #define EDT_RAW_DATA_RETRIES            100
   +  + #define EDT_RAW_DATA_DELAY              1 /* msec */
   +  + 
   +  + struct edt_ft5x06_ts_data {
   +  +         struct i2c_client *client;
   +  +         struct input_dev *input;
   +  +         u16 num_x;
   +  +         u16 num_y;
   +  + 
   +  + #if defined(CONFIG_DEBUG_FS)
   +  +         struct dentry *debug_dir;
   +  +         u8 *raw_buffer;
   +  +         size_t raw_bufsize;
   +  + #endif
   +  + 
   +  +         struct mutex mutex;
   +  +         bool factory_mode;
   +  +         int threshold;
   +  +         int gain;
   +  +         int offset;
   +  +         int report_rate;
   +  + 
   +  +         char name[EDT_NAME_LEN];
   +  + };
   +  + 
   +  + static int edt_ft5x06_ts_readwrite(struct i2c_client *client,
   +  +                                    u16 wr_len, u8 *wr_buf,
   +  +                                    u16 rd_len, u8 *rd_buf)
   +  + {
   +  +         struct i2c_msg wrmsg[2];
   +  +         int i = 0;
   +  +         int ret;
   +  + 
   +  +         if (wr_len) {
   +  +                 wrmsg[i].addr  = client->addr;
   +  +                 wrmsg[i].flags = 0;
   +  +                 wrmsg[i].len = wr_len;
   +  +                 wrmsg[i].buf = wr_buf;
   +  +                 i++;
   +  +         }
   +  +         if (rd_len) {
   +  +                 wrmsg[i].addr  = client->addr;
   +  +                 wrmsg[i].flags = I2C_M_RD;
   +  +                 wrmsg[i].len = rd_len;
   +  +                 wrmsg[i].buf = rd_buf;
   +  +                 i++;
   +  +         }
   +  + 
   +  +         ret = i2c_transfer(client->adapter, wrmsg, i);
   +  +         if (ret < 0)
   +  +                 return ret;
   +  +         if (ret != i)
   +  +                 return -EIO;
   +  + 
   +  +         return 0;
   +  + }
   +  + 
   +  + static bool edt_ft5x06_ts_check_crc(struct edt_ft5x06_ts_data *tsdata,
   +  +                                     u8 *buf, int buflen)
   +  + {
   +  +         int i;
   +  +         u8 crc = 0;
   +  + 
   +  +         for (i = 0; i < buflen - 1; i++)
   +  +                 crc ^= buf[i];
   +  + 
   +  +         if (crc != buf[buflen-1]) {
   +  +                 dev_err_ratelimited(&tsdata->client->dev,
   +  +                                     "crc error: 0x%02x expected, got 0x%02x\n",
   +  +                                     crc, buf[buflen-1]);
   +  +                 return false;
   +  +         }
   +  + 
   +  +         return true;
   +  + }
   +  + 
   +  + static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
   +  + {
   +  +         struct edt_ft5x06_ts_data *tsdata = dev_id;
   +  +         struct device *dev = &tsdata->client->dev;
   +  +         u8 cmd = 0xf9;
   +  +         u8 rdbuf[26];
   +  +         int i, type, x, y, id;
   +  +         int error;
   +  + 
   +  +         memset(rdbuf, 0, sizeof(rdbuf));
   +  + 
   +  +         error = edt_ft5x06_ts_readwrite(tsdata->client,
   +  +                                         sizeof(cmd), &cmd,
   +  +                                         sizeof(rdbuf), rdbuf);
   +  +         if (error) {
   +  +                 dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n",
   +  +                                     error);
   +  +                 goto out;
   +  +         }
   +  + 
   +  +         if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa || rdbuf[2] != 26) {
   +  +                 dev_err_ratelimited(dev, "Unexpected header: %02x%02x%02x!\n",
   +  +                                     rdbuf[0], rdbuf[1], rdbuf[2]);
   +  +                 goto out;
   +  +         }
   +  + 
   +  +         if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, 26))
   +  +                 goto out;
   +  + 
   +  +         for (i = 0; i < MAX_SUPPORT_POINTS; i++) {
   +  +                 u8 *buf = &rdbuf[i * 4 + 5];
   +  +                 bool down;
   +  + 
   +  +                 type = buf[0] >> 6;
   +  +                 /* ignore Reserved events */
   +  +                 if (type == TOUCH_EVENT_RESERVED)
   +  +                         continue;
   +  + 
   +  +                 x = ((buf[0] << 8) | buf[1]) & 0x0fff;
   +  +                 y = ((buf[2] << 8) | buf[3]) & 0x0fff;
   +  +                 id = (buf[2] >> 4) & 0x0f;
   +  +                 down = (type != TOUCH_EVENT_UP);
   +  + 
   +  +                 input_mt_slot(tsdata->input, id);
   +  +                 input_mt_report_slot_state(tsdata->input, MT_TOOL_FINGER, down);
   +  + 
   +  +                 if (!down)
   +  +                         continue;
   +  + 
   +  +                 input_report_abs(tsdata->input, ABS_MT_POSITION_X, x);
   +  +                 input_report_abs(tsdata->input, ABS_MT_POSITION_Y, y);
   +  +         }
   +  + 
   +  +         input_mt_report_pointer_emulation(tsdata->input, true);
   +  +         input_sync(tsdata->input);
   +  + 
   +  + out:
   +  +         return IRQ_HANDLED;
   +  + }
   +  + 
   +  + static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
   +  +                                      u8 addr, u8 value)
   +  + {
   +  +         u8 wrbuf[4];
   +  + 
   +  +         wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
   +  +         wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
   +  +         wrbuf[2] = value;
   +  +         wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2];
   +  + 
   +  +         return edt_ft5x06_ts_readwrite(tsdata->client, 4, wrbuf, 0, NULL);
   +  + }
   +  + 
   +  + static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata,
   +  +                                     u8 addr)
   +  + {
   +  +         u8 wrbuf[2], rdbuf[2];
   +  +         int error;
   +  + 
   +  +         wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
   +  +         wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
   +  +         wrbuf[1] |= tsdata->factory_mode ? 0x80 : 0x40;
   +  + 
   +  +         error = edt_ft5x06_ts_readwrite(tsdata->client, 2, wrbuf, 2, rdbuf);
   +  +         if (error)
   +  +                 return error;
   +  + 
   +  +         if ((wrbuf[0] ^ wrbuf[1] ^ rdbuf[0]) != rdbuf[1]) {
   +  +                 dev_err(&tsdata->client->dev,
   +  +                         "crc error: 0x%02x expected, got 0x%02x\n",
   +  +                         wrbuf[0] ^ wrbuf[1] ^ rdbuf[0], rdbuf[1]);
   +  +                 return -EIO;
   +  +         }
   +  + 
   +  +         return rdbuf[0];
   +  + }
   +  + 
   +  + struct edt_ft5x06_attribute {
   +  +         struct device_attribute dattr;
   +  +         size_t field_offset;
   +  +         u8 limit_low;
   +  +         u8 limit_high;
   +  +         u8 addr;
   +  + };
   +  + 
   +  + #define EDT_ATTR(_field, _mode, _addr, _limit_low, _limit_high)         \
   +  +         struct edt_ft5x06_attribute edt_ft5x06_attr_##_field = {        \
   +  +                 .dattr = __ATTR(_field, _mode,                          \
   +  +                                 edt_ft5x06_setting_show,                \
   +  +                                 edt_ft5x06_setting_store),              \
   +  +                 .field_offset =                                         \
   +  +                         offsetof(struct edt_ft5x06_ts_data, _field),    \
   +  +                 .limit_low = _limit_low,                                \
   +  +                 .limit_high = _limit_high,                              \
   +  +                 .addr = _addr,                                          \
   +  +         }
   +  + 
   +  + static ssize_t edt_ft5x06_setting_show(struct device *dev,
   +  +                                        struct device_attribute *dattr,
   +  +                                        char *buf)
   +  + {
   +  +         struct i2c_client *client = to_i2c_client(dev);
   +  +         struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
   +  +         struct edt_ft5x06_attribute *attr =
   +  +                         container_of(dattr, struct edt_ft5x06_attribute, dattr);
   +  +         u8 *field = (u8 *)((char *)tsdata + attr->field_offset);
   +  +         int val;
   +  +         size_t count = 0;
   +  +         int error = 0;
   +  + 
   +  +         mutex_lock(&tsdata->mutex);
   +  + 
   +  +         if (tsdata->factory_mode) {
   +  +                 error = -EIO;
   +  +                 goto out;
   +  +         }
   +  + 
   +  +         val = edt_ft5x06_register_read(tsdata, attr->addr);
   +  +         if (val < 0) {
   +  +                 error = val;
   +  +                 dev_err(&tsdata->client->dev,
   +  +                         "Failed to fetch attribute %s, error %d\n",
   +  +                         dattr->attr.name, error);
   +  +                 goto out;
   +  +         }
   +  + 
   +  +         if (val != *field) {
   +  +                 dev_warn(&tsdata->client->dev,
   +  +                          "%s: read (%d) and stored value (%d) differ\n",
   +  +                          dattr->attr.name, val, *field);
   +  +                 *field = val;
   +  +         }
   +  + 
   +  +         count = scnprintf(buf, PAGE_SIZE, "%d\n", val);
   +  + out:
   +  +         mutex_unlock(&tsdata->mutex);
   +  +         return error ?: count;
   +  + }
   +  + 
   +  + static ssize_t edt_ft5x06_setting_store(struct device *dev,
   +  +                                         struct device_attribute *dattr,
   +  +                                         const char *buf, size_t count)
   +  + {
   +  +         struct i2c_client *client = to_i2c_client(dev);
   +  +         struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
   +  +         struct edt_ft5x06_attribute *attr =
   +  +                         container_of(dattr, struct edt_ft5x06_attribute, dattr);
   +  +         u8 *field = (u8 *)((char *)tsdata + attr->field_offset);
   +  +         unsigned int val;
   +  +         int error;
   +  + 
   +  +         mutex_lock(&tsdata->mutex);
   +  + 
   +  +         if (tsdata->factory_mode) {
   +  +                 error = -EIO;
   +  +                 goto out;
   +  +         }
   +  + 
   +  +         error = kstrtouint(buf, 0, &val);
   +  +         if (error)
   +  +                 goto out;
   +  + 
   +  +         if (val < attr->limit_low || val > attr->limit_high) {
   +  +                 error = -ERANGE;
   +  +                 goto out;
   +  +         }
   +  + 
   +  +         error = edt_ft5x06_register_write(tsdata, attr->addr, val);
   +  +         if (error) {
   +  +                 dev_err(&tsdata->client->dev,
   +  +                         "Failed to update attribute %s, error: %d\n",
   +  +                         dattr->attr.name, error);
   +  +                 goto out;
   +  +         }
   +  + 
   +  +         *field = val;
   +  + 
   +  + out:
   +  +         mutex_unlock(&tsdata->mutex);
   +  +         return error ?: count;
   +  + }
   +  + 
   +  + static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN, 0, 31);
   +  + static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET, 0, 31);
   +  + static EDT_ATTR(threshold, S_IWUSR | S_IRUGO,
   +  +                 WORK_REGISTER_THRESHOLD, 20, 80);
   +  + static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO,
   +  +                 WORK_REGISTER_REPORT_RATE, 3, 14);
   +  + 
   +  + static struct attribute *edt_ft5x06_attrs[] = {
   +  +         &edt_ft5x06_attr_gain.dattr.attr,
   +  +         &edt_ft5x06_attr_offset.dattr.attr,
   +  +         &edt_ft5x06_attr_threshold.dattr.attr,
   +  +         &edt_ft5x06_attr_report_rate.dattr.attr,
   +  +         NULL
   +  + };
   +  + 
   +  + static const struct attribute_group edt_ft5x06_attr_group = {
   +  +         .attrs = edt_ft5x06_attrs,
   +  + };
   +  + 
   +  + #ifdef CONFIG_DEBUG_FS
   +  + static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
   +  + {
   +  +         struct i2c_client *client = tsdata->client;
   +  +         int retries = EDT_SWITCH_MODE_RETRIES;
   +  +         int ret;
   +  +         int error;
   +  + 
   +  +         disable_irq(client->irq);
   +  + 
   +  +         if (!tsdata->raw_buffer) {
   +  +                 tsdata->raw_bufsize = tsdata->num_x * tsdata->num_y *
   +  +                                       sizeof(u16);
   +  +                 tsdata->raw_buffer = kzalloc(tsdata->raw_bufsize, GFP_KERNEL);
   +  +                 if (!tsdata->raw_buffer) {
   +  +                         error = -ENOMEM;
   +  +                         goto err_out;
   +  +                 }
   +  +         }
   +  + 
   +  +         /* mode register is 0x3c when in the work mode */
   +  +         error = edt_ft5x06_register_write(tsdata, WORK_REGISTER_OPMODE, 0x03);
   +  +         if (error) {
   +  +                 dev_err(&client->dev,
   +  +                         "failed to switch to factory mode, error %d\n", error);
   +  +                 goto err_out;
   +  +         }
   +  + 
   +  +         tsdata->factory_mode = true;
   +  +         do {
   +  +                 mdelay(EDT_SWITCH_MODE_DELAY);
   +  +                 /* mode register is 0x01 when in factory mode */
   +  +                 ret = edt_ft5x06_register_read(tsdata, FACTORY_REGISTER_OPMODE);
   +  +                 if (ret == 0x03)
   +  +                         break;
   +  +         } while (--retries > 0);
   +  + 
   +  +         if (retries == 0) {
   +  +                 dev_err(&client->dev, "not in factory mode after %dms.\n",
   +  +                         EDT_SWITCH_MODE_RETRIES * EDT_SWITCH_MODE_DELAY);
   +  +                 error = -EIO;
   +  +                 goto err_out;
   +  +         }
   +  + 
   +  +         return 0;
   +  + 
   +  + err_out:
   +  +         kfree(tsdata->raw_buffer);
   +  +         tsdata->raw_buffer = NULL;
   +  +         tsdata->factory_mode = false;
   +  +         enable_irq(client->irq);
   +  + 
   +  +         return error;
   +  + }
   +  + 
   +  + static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
   +  + {
   +  +         struct i2c_client *client = tsdata->client;
   +  +         int retries = EDT_SWITCH_MODE_RETRIES;
   +  +         int ret;
   +  +         int error;
   +  + 
   +  +         /* mode register is 0x01 when in the factory mode */
   +  +         error = edt_ft5x06_register_write(tsdata, FACTORY_REGISTER_OPMODE, 0x1);
   +  +         if (error) {
   +  +                 dev_err(&client->dev,
   +  +                         "failed to switch to work mode, error: %d\n", error);
   +  +                 return error;
   +  +         }
   +  + 
   +  +         tsdata->factory_mode = false;
   +  + 
   +  +         do {
   +  +                 mdelay(EDT_SWITCH_MODE_DELAY);
   +  +                 /* mode register is 0x01 when in factory mode */
   +  +                 ret = edt_ft5x06_register_read(tsdata, WORK_REGISTER_OPMODE);
   +  +                 if (ret == 0x01)
   +  +                         break;
   +  +         } while (--retries > 0);
   +  + 
   +  +         if (retries == 0) {
   +  +                 dev_err(&client->dev, "not in work mode after %dms.\n",
   +  +                         EDT_SWITCH_MODE_RETRIES * EDT_SWITCH_MODE_DELAY);
   +  +                 tsdata->factory_mode = true;
   +  +                 return -EIO;
   +  +         }
   +  + 
   +  +         if (tsdata->raw_buffer)
   +  +                 kfree(tsdata->raw_buffer);
   +  +         tsdata->raw_buffer = NULL;
   +  + 
   +  +         /* restore parameters */
   +  +         edt_ft5x06_register_write(tsdata, WORK_REGISTER_THRESHOLD,
   +  +                                   tsdata->threshold);
   +  +         edt_ft5x06_register_write(tsdata, WORK_REGISTER_GAIN,
   +  +                                   tsdata->gain);
   +  +         edt_ft5x06_register_write(tsdata, WORK_REGISTER_OFFSET,
   +  +                                   tsdata->offset);
   +  +         edt_ft5x06_register_write(tsdata, WORK_REGISTER_REPORT_RATE,
   +  +                                   tsdata->report_rate);
   +  + 
   +  +         enable_irq(client->irq);
   +  + 
   +  +         return 0;
   +  + }
   +  + 
   +  + static int edt_ft5x06_debugfs_mode_get(void *data, u64 *mode)
   +  + {
   +  +         struct edt_ft5x06_ts_data *tsdata = data;
   +  + 
   +  +         *mode = tsdata->factory_mode;
   +  + 
   +  +         return 0;
   +  + };
   +  + 
   +  + static int edt_ft5x06_debugfs_mode_set(void *data, u64 mode)
   +  + {
   +  +         struct edt_ft5x06_ts_data *tsdata = data;
   +  +         int retval = 0;
   +  + 
   +  +         if (mode > 1)
   +  +                 return -ERANGE;
   +  + 
   +  +         mutex_lock(&tsdata->mutex);
   +  + 
   +  +         if (mode != tsdata->factory_mode) {
   +  +                 retval = mode ? edt_ft5x06_factory_mode(tsdata) :
   +  +                                 edt_ft5x06_work_mode(tsdata);
   +  +         }
   +  + 
   +  +         mutex_unlock(&tsdata->mutex);
   +  + 
   +  +         return retval;
   +  + };
   +  + 
   +  + DEFINE_SIMPLE_ATTRIBUTE(debugfs_mode_fops, edt_ft5x06_debugfs_mode_get,
   +  +                         edt_ft5x06_debugfs_mode_set, "%llu\n");
   +  + 
   +  + static int edt_ft5x06_debugfs_raw_data_open(struct inode *inode,
   +  +                                             struct file *file)
   +  + {
   +  +         file->private_data = inode->i_private;
   +  + 
   +  +         return 0;
   +  + }
   +  + 
   +  + static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file,
   +  +                                 char __user *buf, size_t count, loff_t *off)
   +  + {
   +  +         struct edt_ft5x06_ts_data *tsdata = file->private_data;
   +  +         struct i2c_client *client = tsdata->client;
   +  +         int retries  = EDT_RAW_DATA_RETRIES;
   +  +         int val, i, error;
   +  +         size_t read = 0;
   +  +         int colbytes;
   +  +         char wrbuf[3];
   +  +         u8 *rdbuf;
   +  + 
   +  +         if (*off < 0 || *off >= tsdata->raw_bufsize)
   +  +                 return 0;
   +  + 
   +  +         mutex_lock(&tsdata->mutex);
   +  + 
   +  +         if (!tsdata->factory_mode || !tsdata->raw_buffer) {
   +  +                 error = -EIO;
   +  +                 goto out;
   +  +         }
   +  + 
   +  +         error = edt_ft5x06_register_write(tsdata, 0x08, 0x01);
   +  +         if (error) {
   +  +                 dev_dbg(&client->dev,
   +  +                         "failed to write 0x08 register, error %d\n", error);
   +  +                 goto out;
   +  +         }
   +  + 
   +  +         do {
   +  +                 msleep(EDT_RAW_DATA_DELAY);
   +  +                 val = edt_ft5x06_register_read(tsdata, 0x08);
   +  +                 if (val < 1)
   +  +                         break;
   +  +         } while (--retries > 0);
   +  + 
   +  +         if (val < 0) {
   +  +                 error = val;
   +  +                 dev_dbg(&client->dev,
   +  +                         "failed to read 0x08 register, error %d\n", error);
   +  +                 goto out;
   +  +         }
   +  + 
   +  +         if (retries == 0) {
   +  +                 dev_dbg(&client->dev,
   +  +                         "timed out waiting for register to settle\n");
   +  +                 error = -ETIMEDOUT;
   +  +                 goto out;
   +  +         }
   +  + 
   +  +         rdbuf = tsdata->raw_buffer;
   +  +         colbytes = tsdata->num_y * sizeof(u16);
   +  + 
   +  +         wrbuf[0] = 0xf5;
   +  +         wrbuf[1] = 0x0e;
   +  +         for (i = 0; i < tsdata->num_x; i++) {
   +  +                 wrbuf[2] = i;  /* column index */
   +  +                 error = edt_ft5x06_ts_readwrite(tsdata->client,
   +  +                                                 sizeof(wrbuf), wrbuf,
   +  +                                                 colbytes, rdbuf);
   +  +                 if (error)
   +  +                         goto out;
   +  + 
   +  +                 rdbuf += colbytes;
   +  +         }
   +  + 
   +  +         read = min_t(size_t, count, tsdata->raw_bufsize - *off);
 -- -- -        error = input_mt_init_slots(input, MAX_SUPPORT_POINTS);
+  + +++        if (copy_to_user(buf, tsdata->raw_buffer + *off, read)) {
+  + +++                error = -EFAULT;
+  + +++                goto out;
+  + +++        }
+  + +++
+  + +++        *off += read;
   +  + out:
   +  +         mutex_unlock(&tsdata->mutex);
   +  +         return error ?: read;
   +  + };
   +  + 
   +  + 
   +  + static const struct file_operations debugfs_raw_data_fops = {
   +  +         .open = edt_ft5x06_debugfs_raw_data_open,
   +  +         .read = edt_ft5x06_debugfs_raw_data_read,
   +  + };
   +  + 
   +  + static void __devinit
   +  + edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
   +  +                               const char *debugfs_name)
   +  + {
   +  +         tsdata->debug_dir = debugfs_create_dir(debugfs_name, NULL);
   +  +         if (!tsdata->debug_dir)
   +  +                 return;
   +  + 
   +  +         debugfs_create_u16("num_x", S_IRUSR, tsdata->debug_dir, &tsdata->num_x);
   +  +         debugfs_create_u16("num_y", S_IRUSR, tsdata->debug_dir, &tsdata->num_y);
   +  + 
   +  +         debugfs_create_file("mode", S_IRUSR | S_IWUSR,
   +  +                             tsdata->debug_dir, tsdata, &debugfs_mode_fops);
   +  +         debugfs_create_file("raw_data", S_IRUSR,
   +  +                             tsdata->debug_dir, tsdata, &debugfs_raw_data_fops);
   +  + }
   +  + 
   +  + static void __devexit
   +  + edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
   +  + {
   +  +         if (tsdata->debug_dir)
   +  +                 debugfs_remove_recursive(tsdata->debug_dir);
+  + +++        kfree(tsdata->raw_buffer);
   +  + }
   +  + 
   +  + #else
   +  + 
   +  + static inline void
   +  + edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
   +  +                               const char *debugfs_name)
   +  + {
   +  + }
   +  + 
   +  + static inline void
   +  + edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
   +  + {
   +  + }
   +  + 
   +  + #endif /* CONFIG_DEBUGFS */
   +  + 
   +  + 
   +  + 
   +  + static int __devinit edt_ft5x06_ts_reset(struct i2c_client *client,
   +  +                                          int reset_pin)
   +  + {
   +  +         int error;
   +  + 
   +  +         if (gpio_is_valid(reset_pin)) {
   +  +                 /* this pulls reset down, enabling the low active reset */
   +  +                 error = gpio_request_one(reset_pin, GPIOF_OUT_INIT_LOW,
   +  +                                          "edt-ft5x06 reset");
   +  +                 if (error) {
   +  +                         dev_err(&client->dev,
   +  +                                 "Failed to request GPIO %d as reset pin, error %d\n",
   +  +                                 reset_pin, error);
   +  +                         return error;
   +  +                 }
   +  + 
   +  +                 mdelay(50);
   +  +                 gpio_set_value(reset_pin, 1);
   +  +                 mdelay(100);
   +  +         }
   +  + 
   +  +         return 0;
   +  + }
   +  + 
   +  + static int __devinit edt_ft5x06_ts_identify(struct i2c_client *client,
   +  +                                             char *model_name,
   +  +                                             char *fw_version)
   +  + {
   +  +         u8 rdbuf[EDT_NAME_LEN];
   +  +         char *p;
   +  +         int error;
   +  + 
   +  +         error = edt_ft5x06_ts_readwrite(client, 1, "\xbb",
   +  +                                         EDT_NAME_LEN - 1, rdbuf);
   +  +         if (error)
   +  +                 return error;
   +  + 
   +  +         /* remove last '$' end marker */
   +  +         rdbuf[EDT_NAME_LEN - 1] = '\0';
   +  +         if (rdbuf[EDT_NAME_LEN - 2] == '$')
   +  +                 rdbuf[EDT_NAME_LEN - 2] = '\0';
   +  + 
   +  +         /* look for Model/Version separator */
   +  +         p = strchr(rdbuf, '*');
   +  +         if (p)
   +  +                 *p++ = '\0';
   +  + 
   +  +         strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN);
   +  +         strlcpy(fw_version, p ? p : "", EDT_NAME_LEN);
   +  + 
   +  +         return 0;
   +  + }
   +  + 
   +  + #define EDT_ATTR_CHECKSET(name, reg) \
   +  +         if (pdata->name >= edt_ft5x06_attr_##name.limit_low &&          \
   +  +             pdata->name <= edt_ft5x06_attr_##name.limit_high)           \
   +  +                 edt_ft5x06_register_write(tsdata, reg, pdata->name)
   +  + 
   +  + static void __devinit
   +  + edt_ft5x06_ts_get_defaults(struct edt_ft5x06_ts_data *tsdata,
   +  +                            const struct edt_ft5x06_platform_data *pdata)
   +  + {
   +  +         if (!pdata->use_parameters)
   +  +                 return;
   +  + 
   +  +         /* pick up defaults from the platform data */
   +  +         EDT_ATTR_CHECKSET(threshold, WORK_REGISTER_THRESHOLD);
   +  +         EDT_ATTR_CHECKSET(gain, WORK_REGISTER_GAIN);
   +  +         EDT_ATTR_CHECKSET(offset, WORK_REGISTER_OFFSET);
   +  +         EDT_ATTR_CHECKSET(report_rate, WORK_REGISTER_REPORT_RATE);
   +  + }
   +  + 
   +  + static void __devinit
   +  + edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
   +  + {
   +  +         tsdata->threshold = edt_ft5x06_register_read(tsdata,
   +  +                                                      WORK_REGISTER_THRESHOLD);
   +  +         tsdata->gain = edt_ft5x06_register_read(tsdata, WORK_REGISTER_GAIN);
   +  +         tsdata->offset = edt_ft5x06_register_read(tsdata, WORK_REGISTER_OFFSET);
   +  +         tsdata->report_rate = edt_ft5x06_register_read(tsdata,
   +  +                                                 WORK_REGISTER_REPORT_RATE);
   +  +         tsdata->num_x = edt_ft5x06_register_read(tsdata, WORK_REGISTER_NUM_X);
   +  +         tsdata->num_y = edt_ft5x06_register_read(tsdata, WORK_REGISTER_NUM_Y);
   +  + }
   +  + 
   +  + static int __devinit edt_ft5x06_ts_probe(struct i2c_client *client,
   +  +                                          const struct i2c_device_id *id)
   +  + {
   +  +         const struct edt_ft5x06_platform_data *pdata =
   +  +                                                 client->dev.platform_data;
   +  +         struct edt_ft5x06_ts_data *tsdata;
   +  +         struct input_dev *input;
   +  +         int error;
   +  +         char fw_version[EDT_NAME_LEN];
   +  + 
   +  +         dev_dbg(&client->dev, "probing for EDT FT5x06 I2C\n");
   +  + 
   +  +         if (!pdata) {
   +  +                 dev_err(&client->dev, "no platform data?\n");
   +  +                 return -EINVAL;
   +  +         }
   +  + 
   +  +         error = edt_ft5x06_ts_reset(client, pdata->reset_pin);
   +  +         if (error)
   +  +                 return error;
   +  + 
   +  +         if (gpio_is_valid(pdata->irq_pin)) {
   +  +                 error = gpio_request_one(pdata->irq_pin,
   +  +                                          GPIOF_IN, "edt-ft5x06 irq");
   +  +                 if (error) {
   +  +                         dev_err(&client->dev,
   +  +                                 "Failed to request GPIO %d, error %d\n",
   +  +                                 pdata->irq_pin, error);
   +  +                         return error;
   +  +                 }
   +  +         }
   +  + 
   +  +         tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL);
   +  +         input = input_allocate_device();
   +  +         if (!tsdata || !input) {
   +  +                 dev_err(&client->dev, "failed to allocate driver data.\n");
   +  +                 error = -ENOMEM;
   +  +                 goto err_free_mem;
   +  +         }
   +  + 
   +  +         mutex_init(&tsdata->mutex);
   +  +         tsdata->client = client;
   +  +         tsdata->input = input;
   +  +         tsdata->factory_mode = false;
   +  + 
   +  +         error = edt_ft5x06_ts_identify(client, tsdata->name, fw_version);
   +  +         if (error) {
   +  +                 dev_err(&client->dev, "touchscreen probe failed\n");
   +  +                 goto err_free_mem;
   +  +         }
   +  + 
   +  +         edt_ft5x06_ts_get_defaults(tsdata, pdata);
   +  +         edt_ft5x06_ts_get_parameters(tsdata);
   +  + 
   +  +         dev_dbg(&client->dev,
   +  +                 "Model \"%s\", Rev. \"%s\", %dx%d sensors\n",
   +  +                 tsdata->name, fw_version, tsdata->num_x, tsdata->num_y);
   +  + 
   +  +         input->name = tsdata->name;
   +  +         input->id.bustype = BUS_I2C;
   +  +         input->dev.parent = &client->dev;
   +  + 
   +  +         __set_bit(EV_SYN, input->evbit);
   +  +         __set_bit(EV_KEY, input->evbit);
   +  +         __set_bit(EV_ABS, input->evbit);
   +  +         __set_bit(BTN_TOUCH, input->keybit);
   +  +         input_set_abs_params(input, ABS_X, 0, tsdata->num_x * 64 - 1, 0, 0);
   +  +         input_set_abs_params(input, ABS_Y, 0, tsdata->num_y * 64 - 1, 0, 0);
   +  +         input_set_abs_params(input, ABS_MT_POSITION_X,
   +  +                              0, tsdata->num_x * 64 - 1, 0, 0);
   +  +         input_set_abs_params(input, ABS_MT_POSITION_Y,
   +  +                              0, tsdata->num_y * 64 - 1, 0, 0);
-    - -        kfree(tsdata->raw_buffer);
 +++++++        error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0);
   +  +         if (error) {
   +  +                 dev_err(&client->dev, "Unable to init MT slots.\n");
   +  +                 goto err_free_mem;
   +  +         }
   +  + 
   +  +         input_set_drvdata(input, tsdata);
   +  +         i2c_set_clientdata(client, tsdata);
   +  + 
   +  +         error = request_threaded_irq(client->irq, NULL, edt_ft5x06_ts_isr,
   +  +                                      IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
   +  +                                      client->name, tsdata);
   +  +         if (error) {
   +  +                 dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
   +  +                 goto err_free_mem;
   +  +         }
   +  + 
   +  +         error = sysfs_create_group(&client->dev.kobj, &edt_ft5x06_attr_group);
   +  +         if (error)
   +  +                 goto err_free_irq;
   +  + 
   +  +         error = input_register_device(input);
   +  +         if (error)
   +  +                 goto err_remove_attrs;
   +  + 
   +  +         edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
   +  +         device_init_wakeup(&client->dev, 1);
   +  + 
   +  +         dev_dbg(&client->dev,
   +  +                 "EDT FT5x06 initialized: IRQ pin %d, Reset pin %d.\n",
   +  +                 pdata->irq_pin, pdata->reset_pin);
   +  + 
   +  +         return 0;
   +  + 
   +  + err_remove_attrs:
   +  +         sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
   +  + err_free_irq:
   +  +         free_irq(client->irq, tsdata);
   +  + err_free_mem:
   +  +         input_free_device(input);
   +  +         kfree(tsdata);
   +  + 
   +  +         if (gpio_is_valid(pdata->irq_pin))
   +  +                 gpio_free(pdata->irq_pin);
   +  + 
   +  +         return error;
   +  + }
   +  + 
   +  + static int __devexit edt_ft5x06_ts_remove(struct i2c_client *client)
   +  + {
   +  +         const struct edt_ft5x06_platform_data *pdata =
   +  +                                                 dev_get_platdata(&client->dev);
   +  +         struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
   +  + 
   +  +         edt_ft5x06_ts_teardown_debugfs(tsdata);
   +  +         sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
   +  + 
   +  +         free_irq(client->irq, tsdata);
   +  +         input_unregister_device(tsdata->input);
   +  + 
   +  +         if (gpio_is_valid(pdata->irq_pin))
   +  +                 gpio_free(pdata->irq_pin);
   +  +         if (gpio_is_valid(pdata->reset_pin))
   +  +                 gpio_free(pdata->reset_pin);
   +  + 
   +  +         kfree(tsdata);
   +  + 
   +  +         return 0;
   +  + }
   +  + 
   +  + #ifdef CONFIG_PM_SLEEP
   +  + static int edt_ft5x06_ts_suspend(struct device *dev)
   +  + {
   +  +         struct i2c_client *client = to_i2c_client(dev);
   +  + 
   +  +         if (device_may_wakeup(dev))
   +  +                 enable_irq_wake(client->irq);
   +  + 
   +  +         return 0;
   +  + }
   +  + 
   +  + static int edt_ft5x06_ts_resume(struct device *dev)
   +  + {
   +  +         struct i2c_client *client = to_i2c_client(dev);
   +  + 
   +  +         if (device_may_wakeup(dev))
   +  +                 disable_irq_wake(client->irq);
   +  + 
   +  +         return 0;
   +  + }
   +  + #endif
   +  + 
   +  + static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
   +  +                          edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);
   +  + 
   +  + static const struct i2c_device_id edt_ft5x06_ts_id[] = {
   +  +         { "edt-ft5x06", 0 },
   +  +         { }
   +  + };
   +  + MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
   +  + 
   +  + static struct i2c_driver edt_ft5x06_ts_driver = {
   +  +         .driver = {
   +  +                 .owner = THIS_MODULE,
   +  +                 .name = "edt_ft5x06",
   +  +                 .pm = &edt_ft5x06_ts_pm_ops,
   +  +         },
   +  +         .id_table = edt_ft5x06_ts_id,
   +  +         .probe    = edt_ft5x06_ts_probe,
   +  +         .remove   = __devexit_p(edt_ft5x06_ts_remove),
   +  + };
   +  + 
   +  + module_i2c_driver(edt_ft5x06_ts_driver);
   +  + 
   +  + MODULE_AUTHOR("Simon Budig <simon.budig@kernelconcepts.de>");
   +  + MODULE_DESCRIPTION("EDT FT5x06 I2C Touchscreen Driver");
   +  + MODULE_LICENSE("GPL");