ath6kl: enable USB support
authorKalle Valo <kvalo@qca.qualcomm.com>
Fri, 11 Nov 2011 10:18:45 +0000 (12:18 +0200)
committerKalle Valo <kvalo@qca.qualcomm.com>
Sun, 13 Nov 2011 10:34:31 +0000 (12:34 +0200)
Now two modules are built, ath6kl_sdio.ko and ath6kl_usb.ko. But the USB
module isn't fully functional yet as HTC layer is missing support and
that's why it's marked as experimental for now.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
drivers/net/wireless/ath/ath6kl/Kconfig
drivers/net/wireless/ath/ath6kl/Makefile
drivers/net/wireless/ath/ath6kl/sdio.c

index 3d5f8be..d755a5e 100644 (file)
@@ -1,12 +1,29 @@
 config ATH6KL
-       tristate "Atheros ath6kl support"
+       tristate "Atheros mobile chipsets support"
+
+config ATH6KL_SDIO
+       tristate "Atheros ath6kl SDIO support"
+       depends on ATH6KL
        depends on MMC
        depends on CFG80211
        ---help---
          This module adds support for wireless adapters based on
-         Atheros AR6003 chipset running over SDIO. If you choose to
-         build it as a module, it will be called ath6kl. Pls note
-         that AR6002 and AR6001 are not supported by this driver.
+         Atheros AR6003 and AR6004 chipsets running over SDIO. If you
+         choose to build it as a module, it will be called ath6kl_sdio.
+         Please note that AR6002 and AR6001 are not supported by this
+         driver.
+
+config ATH6KL_USB
+       tristate "Atheros ath6kl USB support"
+       depends on ATH6KL
+       depends on USB
+       depends on CFG80211
+       depends on EXPERIMENTAL
+       ---help---
+         This module adds support for wireless adapters based on
+         Atheros AR6004 chipset running over USB. This is still under
+         implementation and it isn't functional. If you choose to
+         build it as a module, it will be called ath6kl_usb.
 
 config ATH6KL_DEBUG
        bool "Atheros ath6kl debugging"
index 7070693..e14cef9 100644 (file)
 # Author(s): ="Atheros"
 #------------------------------------------------------------------------------
 
-obj-$(CONFIG_ATH6KL) := ath6kl.o
-ath6kl-y += debug.o
-ath6kl-y += hif.o
-ath6kl-y += htc.o
-ath6kl-y += bmi.o
-ath6kl-y += cfg80211.o
-ath6kl-y += init.o
-ath6kl-y += main.o
-ath6kl-y += txrx.o
-ath6kl-y += wmi.o
-ath6kl-y += sdio.o
-ath6kl-$(CONFIG_NL80211_TESTMODE) += testmode.o
+obj-$(CONFIG_ATH6KL_SDIO) := ath6kl_sdio.o
+ath6kl_sdio-y += debug.o
+ath6kl_sdio-y += hif.o
+ath6kl_sdio-y += htc.o
+ath6kl_sdio-y += bmi.o
+ath6kl_sdio-y += cfg80211.o
+ath6kl_sdio-y += init.o
+ath6kl_sdio-y += main.o
+ath6kl_sdio-y += txrx.o
+ath6kl_sdio-y += wmi.o
+ath6kl_sdio-y += sdio.o
+ath6kl_sdio-$(CONFIG_NL80211_TESTMODE) += testmode.o
+
+obj-$(CONFIG_ATH6KL_USB) += ath6kl_usb.o
+ath6kl_usb-y += debug.o
+ath6kl_usb-y += hif.o
+ath6kl_usb-y += htc.o
+ath6kl_usb-y += bmi.o
+ath6kl_usb-y += cfg80211.o
+ath6kl_usb-y += init.o
+ath6kl_usb-y += main.o
+ath6kl_usb-y += txrx.o
+ath6kl_usb-y += wmi.o
+ath6kl_usb-y += usb.o
+ath6kl_usb-$(CONFIG_NL80211_TESTMODE) += testmode.o
 
 ccflags-y += -D__CHECK_ENDIAN__
index 7ad57cd..fff2f90 100644 (file)
@@ -1298,7 +1298,7 @@ static const struct sdio_device_id ath6kl_sdio_devices[] = {
 MODULE_DEVICE_TABLE(sdio, ath6kl_sdio_devices);
 
 static struct sdio_driver ath6kl_sdio_driver = {
-       .name = "ath6kl",
+       .name = "ath6kl_sdio",
        .id_table = ath6kl_sdio_devices,
        .probe = ath6kl_sdio_probe,
        .remove = ath6kl_sdio_remove,