parport: Add support for the WCH353 1S/1P multi-IO card

This Multi-IO card has one serial 16550-like and one parallel port connector.
Here's the lspci output, after this commit is applied:

03:07.0 Serial controller: Device 4348:5053 (rev 10) (prog-if 02 [16550])
	Subsystem: Device 4348:5053
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at cf00 [size=8]
	Region 1: I/O ports at ce00 [size=8]
	Kernel driver in use: parport_serial
	Kernel modules: 8250_pci, parport_serial

This commit adds an entry with the device ID to the blacklist declared in
8250_pci to prevent the driver from taking ownership. Also, and as was done
for the 2S/1P variant, add a quirk to skip autodetection and set the correct
type to 16550A clone.

Proper entries are added to parport_serial, to support the device parallel
and serial ports.

Cc: Gianluca Anzolin <gianluca@sottospazio.it>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c
index ff53314..ee93200 100644 (file)
--- a/drivers/parport/parport_serial.c
+++ b/drivers/parport/parport_serial.c
@@ -62,6 +62,7 @@ enum parport_pc_pci_cards {
        timedia_9079a,
        timedia_9079b,
        timedia_9079c,
+       wch_ch353_1s1p,
        wch_ch353_2s1p,
        sunix_2s1p,
 };
@@ -148,6 +149,7 @@ static struct parport_pc_pci cards[] = {
        /* timedia_9079a */             { 1, { { 2, 3 }, } },
        /* timedia_9079b */             { 1, { { 2, 3 }, } },
        /* timedia_9079c */             { 1, { { 2, 3 }, } },
+       /* wch_ch353_1s1p*/             { 1, { { 1, -1}, } },
        /* wch_ch353_2s1p*/             { 1, { { 2, -1}, } },
        /* sunix_2s1p */                { 1, { { 3, -1 }, } },
 };
@@ -253,6 +255,7 @@ static struct pci_device_id parport_serial_pci_tbl[] = {
        { 0x1409, 0x7168, 0x1409, 0xd079, 0, 0, timedia_9079c },
 
        /* WCH CARDS */
+       { 0x4348, 0x5053, PCI_ANY_ID, PCI_ANY_ID, 0, 0, wch_ch353_1s1p},
        { 0x4348, 0x7053, 0x4348, 0x3253, 0, 0, wch_ch353_2s1p},
 
        /*
@@ -479,6 +482,12 @@ static struct pciserial_board pci_parport_serial_boards[] = {
                .base_baud      = 921600,
                .uart_offset    = 8,
        },
+       [wch_ch353_1s1p] = {
+               .flags          = FL_BASE0|FL_BASE_BARS,
+               .num_ports      = 1,
+               .base_baud      = 115200,
+               .uart_offset    = 8,
+       },
        [wch_ch353_2s1p] = {
                .flags          = FL_BASE0|FL_BASE_BARS,
                .num_ports      = 2,

diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index b14bcba..f35a85f 100644 (file)
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1778,6 +1778,7 @@ pci_wch_ch353_setup(struct serial_private *priv,
 #define PCI_DEVICE_ID_WCH_CH352_2S     0x3253
 #define PCI_DEVICE_ID_WCH_CH353_4S     0x3453
 #define PCI_DEVICE_ID_WCH_CH353_2S1PF  0x5046
+#define PCI_DEVICE_ID_WCH_CH353_1S1P   0x5053
 #define PCI_DEVICE_ID_WCH_CH353_2S1P   0x7053
 #define PCI_VENDOR_ID_AGESTAR          0x5372
 #define PCI_DEVICE_ID_AGESTAR_9375     0x6872
@@ -2410,6 +2411,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
                .subdevice      = PCI_ANY_ID,
                .setup          = pci_omegapci_setup,
        },
+       /* WCH CH353 1S1P card (16550 clone) */
+       {
+               .vendor         = PCI_VENDOR_ID_WCH,
+               .device         = PCI_DEVICE_ID_WCH_CH353_1S1P,
+               .subvendor      = PCI_ANY_ID,
+               .subdevice      = PCI_ANY_ID,
+               .setup          = pci_wch_ch353_setup,
+       },
        /* WCH CH353 2S1P card (16550 clone) */
        {
                .vendor         = PCI_VENDOR_ID_WCH,
@@ -3526,6 +3535,7 @@ static const struct pci_device_id blacklist[] = {
 
        /* multi-io cards handled by parport_serial */
        { PCI_DEVICE(0x4348, 0x7053), }, /* WCH CH353 2S1P */
+       { PCI_DEVICE(0x4348, 0x5053), }, /* WCH CH353 1S1P */
 };
 
 /*