.parent = &clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 9),
- }, {
- .name = "sata",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 10),
+ }, {
+ .name = "dac",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "vp",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hdmi",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "hdmiphy",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_hdmiphy_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dacphy",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_dac_ctrl,
+ .ctrlbit = (1 << 0),
}, {
.name = "dma",
- .devname = "s3c-pl330.0",
+ .devname = "dma-pl330.0",
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 0),
}, {
--- /dev/null
-/* UART interrupts, each UART has 4 intterupts per channel so
- * use the space between the ISA and S3C main interrupts. Note, these
- * are not in the same order as the S3C24XX series! */
-
-#define IRQ_S5P_UART_BASE0 (16)
-#define IRQ_S5P_UART_BASE1 (20)
-#define IRQ_S5P_UART_BASE2 (24)
-#define IRQ_S5P_UART_BASE3 (28)
-
-#define UART_IRQ_RXD (0)
-#define UART_IRQ_ERR (1)
-#define UART_IRQ_TXD (2)
-
-#define IRQ_S5P_UART_RX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX0 (IRQ_S5P_UART_BASE0 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR0 (IRQ_S5P_UART_BASE0 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX1 (IRQ_S5P_UART_BASE1 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR1 (IRQ_S5P_UART_BASE1 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX2 (IRQ_S5P_UART_BASE2 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR2 (IRQ_S5P_UART_BASE2 + UART_IRQ_ERR)
-
-#define IRQ_S5P_UART_RX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_RXD)
-#define IRQ_S5P_UART_TX3 (IRQ_S5P_UART_BASE3 + UART_IRQ_TXD)
-#define IRQ_S5P_UART_ERR3 (IRQ_S5P_UART_BASE3 + UART_IRQ_ERR)
-
-/* S3C compatibilty defines */
-#define IRQ_S3CUART_RX0 IRQ_S5P_UART_RX0
-#define IRQ_S3CUART_RX1 IRQ_S5P_UART_RX1
-#define IRQ_S3CUART_RX2 IRQ_S5P_UART_RX2
-#define IRQ_S3CUART_RX3 IRQ_S5P_UART_RX3
-
+ /* linux/arch/arm/plat-samsung/include/plat/irqs.h
+ *
+ * Copyright (c) 2009 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P Common IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+ #ifndef __PLAT_SAMSUNG_IRQS_H
+ #define __PLAT_SAMSUNG_IRQS_H __FILE__
+
+ /* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ *
+ * note, since we're using the VICs, our start must be a
+ * mulitple of 32 to allow the common code to work
+ */
+
+ #define S5P_IRQ_OFFSET (32)
+
+ #define S5P_IRQ(x) ((x) + S5P_IRQ_OFFSET)
+
+ #define S5P_VIC0_BASE S5P_IRQ(0)
+ #define S5P_VIC1_BASE S5P_IRQ(32)
+ #define S5P_VIC2_BASE S5P_IRQ(64)
+ #define S5P_VIC3_BASE S5P_IRQ(96)
+
+ #define VIC_BASE(x) (S5P_VIC0_BASE + ((x)*32))
+
+ #define IRQ_VIC0_BASE S5P_VIC0_BASE
+ #define IRQ_VIC1_BASE S5P_VIC1_BASE
+ #define IRQ_VIC2_BASE S5P_VIC2_BASE
+
+ /* VIC based IRQs */
+
+ #define S5P_IRQ_VIC0(x) (S5P_VIC0_BASE + (x))
+ #define S5P_IRQ_VIC1(x) (S5P_VIC1_BASE + (x))
+ #define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
+ #define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
+
+ #define S5P_TIMER_IRQ(x) (11 + (x))
+
+ #define IRQ_TIMER0 S5P_TIMER_IRQ(0)
+ #define IRQ_TIMER1 S5P_TIMER_IRQ(1)
+ #define IRQ_TIMER2 S5P_TIMER_IRQ(2)
+ #define IRQ_TIMER3 S5P_TIMER_IRQ(3)
+ #define IRQ_TIMER4 S5P_TIMER_IRQ(4)
+
+ #define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
+ : ((x) - 16 + S5P_EINT_BASE2))
+
+ #define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \
+ ((irq) - S5P_EINT_BASE1) : \
+ ((irq) + 16 - S5P_EINT_BASE2))
+
+ #define IRQ_EINT_BIT(x) EINT_OFFSET(x)
+
+ /* Typically only a few gpio chips require gpio interrupt support.
+ To avoid memory waste irq descriptors are allocated only for
+ S5P_GPIOINT_GROUP_COUNT chips, each with total number of
+ S5P_GPIOINT_GROUP_SIZE pins/irqs. Each GPIOINT group can be assiged
+ to any gpio chip with the s5p_register_gpio_interrupt() function */
+ #define S5P_GPIOINT_GROUP_COUNT 4
+ #define S5P_GPIOINT_GROUP_SIZE 8
+ #define S5P_GPIOINT_COUNT (S5P_GPIOINT_GROUP_COUNT * S5P_GPIOINT_GROUP_SIZE)
+
+ /* IRQ types common for all s5p platforms */
+ #define S5P_IRQ_TYPE_LEVEL_LOW (0x00)
+ #define S5P_IRQ_TYPE_LEVEL_HIGH (0x01)
+ #define S5P_IRQ_TYPE_EDGE_FALLING (0x02)
+ #define S5P_IRQ_TYPE_EDGE_RISING (0x03)
+ #define S5P_IRQ_TYPE_EDGE_BOTH (0x04)
+
+ #endif /* __PLAT_SAMSUNG_IRQS_H */
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
+obj-$(CONFIG_ARCH_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
- obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o
obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
+obj-$(CONFIG_MACH_KS8695) += gpio-ks8695.o
obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o
+obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
obj-$(CONFIG_GPIO_MAX7301) += gpio-max7301.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
+obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
-
- obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o
- obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o
- obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o
+ obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
+obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
obj-$(CONFIG_GPIO_SCH) += gpio-sch.o
obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o
obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o
projects / cascardo / linux.git / commitdiff