signing_key.priv
signing_key.x509
x509.genkey
+
+# Kconfig presets
+all.config
- How to do DMA with ISA (and LPC) devices.
DMA-attributes.txt
- listing of the various possible attributes a DMA region can have
+dmatest.txt
+ - how to compile, configure and use the dmatest system.
DocBook/
- directory with DocBook templates etc. for kernel documentation.
EDID/
- directory with info about Linux on the ARM architecture.
arm64/
- directory with info about Linux on the 64 bit ARM architecture.
+assoc_array.txt
+ - generic associative array intro.
atomic_ops.txt
- semantics and behavior of atomic and bitmask operations.
auxdisplay/
- how to use kernel parameters to exclude bad RAM regions.
basic_profiling.txt
- basic instructions for those who wants to profile Linux kernel.
+bcache.txt
+ - Block-layer cache on fast SSDs to improve slow (raid) I/O performance.
binfmt_misc.txt
- info on the kernel support for extra binary formats.
blackfin/
- info about initramfs, klibc, and userspace early during boot.
edac.txt
- information on EDAC - Error Detection And Correction
+efi-stub.txt
+ - How to use the EFI boot stub to bypass GRUB or elilo on EFI systems.
eisa.txt
- info on EISA bus support.
email-clients.txt
- info on requeueing of tasks from a non-PI futex to a PI futex
gcov.txt
- use of GCC's coverage testing tool "gcov" with the Linux kernel
-gpio.txt
- - overview of GPIO (General Purpose Input/Output) access conventions.
+gpio/
+ - gpio related documentation
hid/
- directory with information on human interface devices
highuid.txt
- listing of various WWW + books that document kernel internals.
kernel-parameters.txt
- summary listing of command line / boot prompt args for the kernel.
+kernel-per-CPU-kthreads.txt
+ - List of all per-CPU kthreads and how they introduce jitter.
kmemcheck.txt
- info on dynamic checker that detects uses of uninitialized memory.
kmemleak.txt
- directory with info on parts like the Texas Instruments EMIF driver
memory-hotplug.txt
- Hotpluggable memory support, how to use and current status.
-memory.txt
- - info on typical Linux memory problems.
metag/
- directory with info about Linux on Meta architecture.
mips/
- directory with info about the MMC subsystem
mn10300/
- directory with info about the mn10300 architecture port
+module-signing.txt
+ - Kernel module signing for increased security when loading modules.
mtd/
- directory with info about memory technology devices (flash)
mono.txt
- info on the Linux PCMCIA driver.
percpu-rw-semaphore.txt
- RCU based read-write semaphore optimized for locking for reading
+phy.txt
+ - Description of the generic PHY framework.
pi-futex.txt
- documentation on lightweight priority inheritance futexes.
pinctrl.txt
- info on the magic SysRq key.
target/
- directory with info on generating TCM v4 fabric .ko modules
+this_cpu_ops.txt
+ - List rationale behind and the way to use this_cpu operations.
thermal/
- directory with information on managing thermal issues (CPU/temp)
trace/
- directory with info about Intel Wireless Wimax Connections
workqueue.txt
- information on the Concurrency Managed Workqueue implementation
+ww-mutex-design.txt
+ - Intro to Mutex wait/would deadlock handling.s
x86/x86_64/
- directory with info on Linux support for AMD x86-64 (Hammer) machines.
xtensa/
Contact: Kay Sievers <kay.sievers@vrfy.org>
Description:
Shows the list of currently configured
- console devices, like 'tty1 ttyS0'.
+ tty devices used for the console,
+ like 'tty1 ttyS0'.
The last entry in the file is the active
device connected to /dev/console.
The file supports poll() to detect virtual
- Using RCU to Protect Read-Mostly Linked Lists
lockdep.txt
- RCU and lockdep checking
+lockdep-splat.txt
+ - RCU Lockdep splats explained.
NMI-RCU.txt
- Using RCU to Protect Dynamic NMI Handlers
rcubarrier.txt
- requirements for booting
Interrupts
- ARM Interrupt subsystem documentation
+IXP4xx
+ - Intel IXP4xx Network processor.
msm
- MSM specific documentation
Netwinder
- ST SPEAr platform Linux Overview
VFP/
- Release notes for Linux Kernel Vector Floating Point support code
+cluster-pm-race-avoidance.txt
+ - Algorithm for CPU and Cluster setup/teardown
empeg/
- Ltd's Empeg MP3 Car Audio Player
+firmware.txt
+ - Secure firmware registration and calling.
+kernel_mode_neon.txt
+ - How to use NEON instructions in kernel mode
+kernel_user_helpers.txt
+ - Helper functions in kernel space made available for userspace.
mem_alignment
- alignment abort handler documentation
memory.txt
- NWFPE floating point emulator documentation
swp_emulation
- SWP/SWPB emulation handler/logging description
+tcm.txt
+ - ARM Tightly Coupled Memory
+vlocks.txt
+ - Voting locks, low-level mechanism relying on memory system atomic writes.
00-INDEX
- This file
-
+Makefile
+ - Makefile for gptimers example file.
bfin-gpio-notes.txt
- Notes in developing/using bfin-gpio driver.
-
bfin-spi-notes.txt
- Notes for using bfin spi bus driver.
+gptimers-example.c
+ - gptimers example
- Deadline IO scheduler tunables
ioprio.txt
- Block io priorities (in CFQ scheduler)
+null_blk.txt
+ - Null block for block-layer benchmarking.
queue-sysfs.txt
- Queue's sysfs entries
request.txt
- this file
booting-without-of.txt
- Booting Linux without Open Firmware, describes history and format of device trees.
+usage-model.txt
+ - How Linux uses DT and what DT aims to solve.
\ No newline at end of file
regions, used when the GIC doesn't have banked registers. The offset is
cpu-offset * cpu-nr.
+- arm,routable-irqs : Total number of gic irq inputs which are not directly
+ connected from the peripherals, but are routed dynamically
+ by a crossbar/multiplexer preceding the GIC. The GIC irq
+ input line is assigned dynamically when the corresponding
+ peripheral's crossbar line is mapped.
Example:
intc: interrupt-controller@fff11000 {
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
+ arm,routable-irqs = <160>;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
};
--- /dev/null
+Some socs have a large number of interrupts requests to service
+the needs of its many peripherals and subsystems. All of the
+interrupt lines from the subsystems are not needed at the same
+time, so they have to be muxed to the irq-controller appropriately.
+In such places a interrupt controllers are preceded by an CROSSBAR
+that provides flexibility in muxing the device requests to the controller
+inputs.
+
+Required properties:
+- compatible : Should be "ti,irq-crossbar"
+- reg: Base address and the size of the crossbar registers.
+- ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,reg-size: Size of a individual register in bytes. Every individual
+ register is assumed to be of same size. Valid sizes are 1, 2, 4.
+- ti,irqs-reserved: List of the reserved irq lines that are not muxed using
+ crossbar. These interrupt lines are reserved in the soc,
+ so crossbar bar driver should not consider them as free
+ lines.
+
+Examples:
+ crossbar_mpu: @4a020000 {
+ compatible = "ti,irq-crossbar";
+ reg = <0x4a002a48 0x130>;
+ ti,max-irqs = <160>;
+ ti,reg-size = <2>;
+ ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+ };
--- /dev/null
+Clock bindings for ARM Integrator Core Module clocks
+
+Auxilary Oscillator Clock
+
+This is a configurable clock fed from a 24 MHz chrystal,
+used for generating e.g. video clocks. It is located on the
+core module and there is only one of these.
+
+This clock node *must* be a subnode of the core module, since
+it obtains the base address for it's address range from its
+parent node.
+
+
+Required properties:
+- compatible: must be "arm,integrator-cm-auxosc"
+- #clock-cells: must be <0>
+
+Optional properties:
+- clocks: parent clock(s)
+
+Example:
+
+core-module@10000000 {
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ auxosc: cm_aux_osc@25M {
+ #clock-cells = <0>;
+ compatible = "arm,integrator-cm-auxosc";
+ clocks = <&xtal24mhz>;
+ };
+};
--- /dev/null
+TI-NSPIRE interrupt controller
+
+Required properties:
+- compatible: Compatible property value should be "lsi,zevio-intc".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+Example:
+
+interrupt-controller {
+ compatible = "lsi,zevio-intc";
+ interrupt-controller;
+ reg = <0xDC000000 0x1000>;
+ #interrupt-cells = <1>;
+};
- #address-cells: should be one. The cell is the slot id.
- #size-cells: should be zero.
- at least one slot node
+- clock-names: tuple listing input clock names.
+ Required elements: "mci_clk"
+- clocks: phandles to input clocks.
The node contains child nodes for each slot that the platform uses
interrupts = <12 4>;
#address-cells = <1>;
#size-cells = <0>;
+ clock-names = "mci_clk";
+ clocks = <&mci0_clk>;
[ child node definitions...]
};
--- /dev/null
+* Altera SOCFPGA specific extensions to the Synopsys Designware Mobile
+ Storage Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Altera SOCFPGA specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+ - "altr,socfpga-dw-mshc": for Altera's SOCFPGA platform
+
+Example:
+
+ mmc: dwmmc0@ff704000 {
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff704000 0x1000>;
+ interrupts = <0 129 4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
* Allwinner EMAC ethernet controller
Required properties:
-- compatible: should be "allwinner,sun4i-emac".
+- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated:
+ "allwinner,sun4i-emac")
- reg: address and length of the register set for the device.
- interrupts: interrupt for the device
- phy: A phandle to a phy node defining the PHY address (as the reg
Example:
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
* Allwinner A10 MDIO Ethernet Controller interface
Required properties:
-- compatible: should be "allwinner,sun4i-mdio".
+- compatible: should be "allwinner,sun4i-a10-mdio"
+ (Deprecated: "allwinner,sun4i-mdio").
- reg: address and length of the register set for the device.
Optional properties:
Example at the SoC level:
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
#address-cells = <1>;
#size-cells = <0>;
--- /dev/null
+Binding for TI bq2415x Li-Ion Charger
+
+Required properties:
+- compatible: Should contain one of the following:
+ * "ti,bq24150"
+ * "ti,bq24150"
+ * "ti,bq24150a"
+ * "ti,bq24151"
+ * "ti,bq24151a"
+ * "ti,bq24152"
+ * "ti,bq24153"
+ * "ti,bq24153a"
+ * "ti,bq24155"
+ * "ti,bq24156"
+ * "ti,bq24156a"
+ * "ti,bq24158"
+- reg: integer, i2c address of the device.
+- ti,current-limit: integer, initial maximum current charger can pull
+ from power supply in mA.
+- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
+ The chip will use slow precharge if battery voltage
+ is below this value.
+- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
+- ti,charge-current: integer, maximum charging current in mA.
+- ti,termination-current: integer, charge will be terminated when current in
+ constant-voltage phase drops below this value (in mA).
+- ti,resistor-sense: integer, value of sensing resistor in milliohm.
+
+Optional properties:
+- ti,usb-charger-detection: phandle to usb charger detection device.
+ (required for auto mode)
+
+Example from Nokia N900:
+
+bq24150a {
+ compatible = "ti,bq24150a";
+ reg = <0x6b>;
+
+ ti,current-limit = <100>;
+ ti,weak-battery-voltage = <3400>;
+ ti,battery-regulation-voltage = <4200>;
+ ti,charge-current = <650>;
+ ti,termination-current = <100>;
+ ti,resistor-sense = <68>;
+
+ ti,usb-charger-detection = <&isp1704>;
+};
microcontroller to turn the power off. This driver adds a handler to
pm_power_off which is called to turn the power off.
+Synology NAS devices use a similar scheme, but a different baud rate,
+9600, and a different character, '1'.
+
Required Properties:
-- compatible: Should be "qnap,power-off"
+- compatible: Should be "qnap,power-off" or "synology,power-off"
- reg: Address and length of the register set for UART1
- clocks: tclk clock
--- /dev/null
+STMicroelectronics STi family Sysconfig Peripheral Powerdown Reset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable on-chip peripheral controllers such as USB and SATA, using
+"powerdown" control bits found in the STi family SoC system configuration
+registers. These have been grouped together into a single reset controller
+device for convenience.
+
+The actual action taken when powerdown is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers and after an assert/deassert sequence the hardware's previous state
+may no longer be valid.
+
+Please refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,<chip>-powerdown"
+ ex: "st,stih415-powerdown", "st,stih416-powerdown"
+- #reset-cells: 1, see below
+
+example:
+
+ powerdown: powerdown-controller {
+ #reset-cells = <1>;
+ compatible = "st,stih415-powerdown";
+ };
+
+
+Specifying powerdown control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the powerdown device node and an
+index specifying which channel to use, as described in reset.txt
+
+example:
+
+ usb1: usb@fe200000 {
+ resets = <&powerdown STIH41X_USB1_POWERDOWN>;
+ };
+
+Macro definitions for the supported reset channels can be found in:
+
+include/dt-bindings/reset-controller/stih415-resets.h
+include/dt-bindings/reset-controller/stih416-resets.h
--- /dev/null
+STMicroelectronics STi family Sysconfig Peripheral SoftReset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable on-chip peripheral controllers such as USB and SATA, using
+"softreset" control bits found in the STi family SoC system configuration
+registers.
+
+The actual action taken when softreset is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers and after an assert/deassert sequence the hardware's previous state
+may no longer be valid.
+
+Please refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+- compatible: Should be "st,<chip>-softreset" example:
+ "st,stih415-softreset" or "st,stih416-softreset";
+- #reset-cells: 1, see below
+
+example:
+
+ softreset: softreset-controller {
+ #reset-cells = <1>;
+ compatible = "st,stih415-softreset";
+ };
+
+
+Specifying softreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the softreset device node and an
+index specifying which channel to use, as described in reset.txt
+
+example:
+
+ ethernet0{
+ resets = <&softreset STIH415_ETH0_SOFTRESET>;
+ };
+
+Macro definitions for the supported reset channels can be found in:
+
+include/dt-bindings/reset-controller/stih415-resets.h
+include/dt-bindings/reset-controller/stih416-resets.h
- reg: Address and length of the register set for the device
- interrupts: Should contain spi interrupt
- cs-gpios: chipselects
+- clock-names: tuple listing input clock names.
+ Required elements: "spi_clk"
+- clocks: phandles to input clocks.
Example:
interrupts = <13 4 5>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&spi1_clk>;
+ clock-names = "spi_clk";
cs-gpios = <&pioB 3 0>;
status = "okay";
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
ak Asahi Kasei Corp.
+allwinner Allwinner Technology Co., Ltd.
altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amstaos AMS-Taos Inc.
gumstix Gumstix, Inc.
haoyu Haoyu Microelectronic Co. Ltd.
hisilicon Hisilicon Limited.
+honeywell Honeywell
hp Hewlett Packard
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
microchip Microchip Technology Inc.
mosaixtech Mosaix Technologies, Inc.
national National Semiconductor
+neonode Neonode Inc.
nintendo Nintendo
nvidia NVIDIA
nxp NXP Semiconductors
picochip Picochip Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
-qcom Qualcomm, Inc.
+qcom Qualcomm Technologies, Inc
ralink Mediatek/Ralink Technology Corp.
ramtron Ramtron International
realtek Realtek Semiconductor Corp.
simtek
sirf SiRF Technology, Inc.
snps Synopsys, Inc.
+spansion Spansion Inc.
st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
Required Properties:
- Compatibility : "marvell,orion-wdt"
-- reg : Address of the timer registers
+ "marvell,armada-370-wdt"
+ "marvell,armada-xp-wdt"
+
+- reg : Should contain two entries: first one with the
+ timer control address, second one with the
+ rstout enable address.
Optional properties:
+- interrupts : Contains the IRQ for watchdog expiration
- timeout-sec : Contains the watchdog timeout in seconds
Example:
wdt@20300 {
compatible = "marvell,orion-wdt";
- reg = <0x20300 0x28>;
+ reg = <0x20300 0x28>, <0x20108 0x4>;
+ interrupts = <3>;
timeout-sec = <10>;
status = "okay";
};
Wilson Michaels <wilsonmichaels@earthlink.net>
for the lgdt330x frontend driver, and various bugfixes
-Michael Krufky <mkrufky@m1k.net>
+Michael Krufky <mkrufky@linuxtv.org>
for maintaining v4l/dvb inter-tree dependencies
Taylor Jacob <rtjacob@earthlink.net>
00-INDEX
- this file.
+api.txt
+ - The frame buffer API between applications and buffer devices.
arkfb.txt
- info on the fbdev driver for ARK Logic chips.
aty128fb.txt
- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
sisfb.txt
- info on the framebuffer device driver for various SiS chips.
+sm501.txt
+ - info on the framebuffer device driver for sm501 videoframebuffer.
sstfb.txt
- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
tgafb.txt
- info on the TGA (DECChip 21030) frame buffer driver.
tridentfb.txt
info on the framebuffer driver for some Trident chip based cards.
+udlfb.txt
+ - Driver for DisplayLink USB 2.0 chips.
uvesafb.txt
- info on the userspace VESA (VBE2+ compliant) frame buffer device.
vesafb.txt
- this file (info on some of the filesystems supported by linux).
Locking
- info on locking rules as they pertain to Linux VFS.
+Makefile
+ - Makefile for building the filsystems-part of DocBook.
9p.txt
- 9p (v9fs) is an implementation of the Plan 9 remote fs protocol.
adfs.txt
- info on the Linux server implementation of NFSv4 minor version 1.
nfs-rdma.txt
- how to install and setup the Linux NFS/RDMA client and server software
+nfsd-admin-interfaces.txt
+ - Administrative interfaces for nfsd.
nfsroot.txt
- short guide on setting up a diskless box with NFS root filesystem.
pnfs.txt
- introduction to the caching mechanisms in the sunrpc layer.
idmapper.txt
- information for configuring request-keys to be used by idmapper
-knfsd-rpcgss.txt
+rpc-server-gss.txt
- Information on GSS authentication support in the NFS Server
several ways to achieve this, depending on the context and requirements.
-Method 1: Declare the I2C devices by bus number
------------------------------------------------
+Method 1a: Declare the I2C devices by bus number
+------------------------------------------------
This method is appropriate when the I2C bus is a system bus as is the case
for many embedded systems. On such systems, each I2C bus has a number
they sit on goes away (if ever.)
+Method 1b: Declare the I2C devices via devicetree
+-------------------------------------------------
+
+This method has the same implications as method 1a. The declaration of I2C
+devices is here done via devicetree as subnodes of the master controller.
+
+Example:
+
+ i2c1: i2c@400a0000 {
+ /* ... master properties skipped ... */
+ clock-frequency = <100000>;
+
+ flash@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+
+ pca9532: gpio@60 {
+ compatible = "nxp,pca9532";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x60>;
+ };
+ };
+
+Here, two devices are attached to the bus using a speed of 100kHz. For
+additional properties which might be needed to set up the device, please refer
+to its devicetree documentation in Documentation/devicetree/bindings/.
+
+
+Method 1c: Declare the I2C devices via ACPI
+-------------------------------------------
+
+ACPI can also describe I2C devices. There is special documentation for this
+which is currently located at Documentation/acpi/enumeration.txt.
+
+
Method 2: Instantiate the devices explicitly
--------------------------------------------
- info on the IDE ATAPI streaming tape driver
ide.txt
- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
+warm-plug-howto.txt
+ - using sysfs to remove and add IDE devices.
\ No newline at end of file
option description.
memmap=nn[KMG]@ss[KMG]
- [KNL] Force usage of a specific region of memory
- Region of memory to be used, from ss to ss+nn.
+ [KNL] Force usage of a specific region of memory.
+ Region of memory to be used is from ss to ss+nn.
memmap=nn[KMG]#ss[KMG]
[KNL,ACPI] Mark specific memory as ACPI data.
- Region of memory to be used, from ss to ss+nn.
+ Region of memory to be marked is from ss to ss+nn.
memmap=nn[KMG]$ss[KMG]
[KNL,ACPI] Mark specific memory as reserved.
- Region of memory to be used, from ss to ss+nn.
+ Region of memory to be reserved is from ss to ss+nn.
Example: Exclude memory from 0x18690000-0x1869ffff
memmap=64K$0x18690000
or
00-INDEX
- This file
-acer-wmi.txt
- - information on the Acer Laptop WMI Extras driver.
+Makefile
+ - Makefile for building dslm example program.
asus-laptop.txt
- information on the Asus Laptop Extras driver.
disk-shock-protection.txt
- information on hard disk shock protection.
dslm.c
- Simple Disk Sleep Monitor program
+hpfall.c
+ - (HP) laptop accelerometer program for disk protection.
laptop-mode.txt
- how to conserve battery power using laptop-mode.
sony-laptop.txt
+00-INDEX
+ - This file
+leds-blinkm.txt
+ - Driver for BlinkM LED-devices.
leds-class.txt
- documents LED handling under Linux.
leds-lp3944.txt
- description about lp55xx common driver.
leds-lm3556.txt
- notes on how to use the leds-lm3556 driver.
+ledtrig-oneshot.txt
+ - One-shot LED trigger for both sporadic and dense events.
+ledtrig-transient.txt
+ - LED Transient Trigger, one shot timer activation.
00-INDEX
- this file
+README.buddha
+ - Amiga Buddha and Catweasel IDE Driver
kernel-options.txt
- command line options for Linux/m68k
- information on the 3Com Etherlink III Series Ethernet cards.
6pack.txt
- info on the 6pack protocol, an alternative to KISS for AX.25
-DLINK.txt
- - info on the D-Link DE-600/DE-620 parallel port pocket adapters
+LICENSE.qla3xxx
+ - GPLv2 for QLogic Linux Networking HBA Driver
+LICENSE.qlge
+ - GPLv2 for QLogic Linux qlge NIC Driver
+LICENSE.qlcnic
+ - GPLv2 for QLogic Linux qlcnic NIC Driver
+Makefile
+ - Makefile for docsrc.
PLIP.txt
- PLIP: The Parallel Line Internet Protocol device driver
README.ipw2100
README.sb1000
- info on General Instrument/NextLevel SURFboard1000 cable modem.
alias.txt
- - info on using alias network devices
+ - info on using alias network devices.
arcnet-hardware.txt
- tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc.
arcnet.txt
- info on using Frame Relay/Data Link Connection Identifier (DLCI).
gen_stats.txt
- Generic networking statistics for netlink users.
-generic_hdlc.txt
+generic-hdlc.txt
- The generic High Level Data Link Control (HDLC) layer.
generic_netlink.txt
- info on Generic Netlink
- Gianfar Ethernet Driver.
i40e.txt
- README for the Intel Ethernet Controller XL710 Driver (i40e).
+i40evf.txt
+ - Short note on the Driver for the Intel(R) XL710 X710 Virtual Function
ieee802154.txt
- Linux IEEE 802.15.4 implementation, API and drivers
igb.txt
- AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
iphase.txt
- Interphase PCI ATM (i)Chip IA Linux driver info.
+ipsec.txt
+ - Note on not compressing IPSec payload and resulting failed policy check.
ipv6.txt
- Options to the ipv6 kernel module.
ipvs-sysctl.txt
- programming information of the LAPB module.
ltpc.txt
- the Apple or Farallon LocalTalk PC card driver
+mac80211-auth-assoc-deauth.txt
+ - authentication and association / deauth-disassoc with max80211
mac80211-injection.txt
- HOWTO use packet injection with mac80211
multiqueue.txt
- info on network device driver functions exported to the kernel.
netif-msg.txt
- Design of the network interface message level setting (NETIF_MSG_*).
+netlink_mmap.txt
+ - memory mapped I/O with netlink
+nf_conntrack-sysctl.txt
+ - list of netfilter-sysctl knobs.
nfc.txt
- The Linux Near Field Communication (NFS) subsystem.
openvswitch.txt
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
smc9.txt
- the driver for SMC's 9000 series of Ethernet cards
-spider-net.txt
+spider_net.txt
- README for the Spidernet Driver (as found in PS3 / Cell BE).
stmmac.txt
- README for the STMicro Synopsys Ethernet driver.
- short blurb on how TCP output takes place.
tcp-thin.txt
- kernel tuning options for low rate 'thin' TCP streams.
+team.txt
+ - pointer to information for ethernet teaming devices.
tlan.txt
- ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
tproxy.txt
- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
vxge.txt
- README for the Neterion X3100 PCIe Server Adapter.
+vxlan.txt
+ - Virtual extensible LAN overview
x25.txt
- general info on X.25 development.
x25-iface.txt
it. This framework provides the following APIs to get a reference to the PHY.
struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
struct phy *devm_phy_get(struct device *dev, const char *string);
-
-phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot,
-the string arguments should contain the phy name as given in the dt data and
-in the case of non-dt boot, it should contain the label of the PHY.
-The only difference between the two APIs is that devm_phy_get associates the
-device with the PHY using devres on successful PHY get. On driver detach,
-release function is invoked on the the devres data and devres data is freed.
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
+
+phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
+be used to get the PHY. In the case of dt boot, the string arguments
+should contain the phy name as given in the dt data and in the case of
+non-dt boot, it should contain the label of the PHY. The two
+devm_phy_get associates the device with the PHY using devres on
+successful PHY get. On driver detach, release function is invoked on
+the the devres data and devres data is freed. phy_optional_get and
+devm_phy_optional_get should be used when the phy is optional. These
+two functions will never return -ENODEV, but instead returns NULL when
+the phy cannot be found.
+
+It should be noted that NULL is a valid phy reference. All phy
+consumer calls on the NULL phy become NOPs. That is the release calls,
+the phy_init() and phy_exit() calls, and phy_power_on() and
+phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
+phy is useful in devices for handling optional phy devices.
5. Releasing a reference to the PHY
- basic info about the APM and ACPI support.
basic-pm-debugging.txt
- Debugging suspend and resume
+charger-manager.txt
+ - Battery charger management.
devices.txt
- How drivers interact with system-wide power management
drivers-testing.txt
- info on Linux PM Quality of Service interface
power_supply_class.txt
- Tells userspace about battery, UPS, AC or DC power supply properties
+runtime_pm.txt
+ - Power management framework for I/O devices.
s2ram.txt
- How to get suspend to ram working (and debug it when it isn't)
states.txt
- How to trick software suspend (to disk) into working when it isn't
userland-swsusp.txt
- Experimental implementation of software suspend in userspace
-video_extension.txt
- - ACPI video extensions
video.txt
- Video issues during resume from suspend
" -f val adjust the ptp clock frequency by 'val' ppb\n"
" -g get the ptp clock time\n"
" -h prints this message\n"
+ " -i val index for event/trigger\n"
" -k val measure the time offset between system and phc clock\n"
" for 'val' times (Maximum 25)\n"
" -p val enable output with a period of 'val' nanoseconds\n"
int capabilities = 0;
int extts = 0;
int gettime = 0;
+ int index = 0;
int oneshot = 0;
int pct_offset = 0;
int n_samples = 0;
progname = strrchr(argv[0], '/');
progname = progname ? 1+progname : argv[0];
- while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghk:p:P:sSt:v"))) {
+ while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghi:k:p:P:sSt:v"))) {
switch (c) {
case 'a':
oneshot = atoi(optarg);
case 'g':
gettime = 1;
break;
+ case 'i':
+ index = atoi(optarg);
+ break;
case 'k':
pct_offset = 1;
n_samples = atoi(optarg);
if (extts) {
memset(&extts_request, 0, sizeof(extts_request));
- extts_request.index = 0;
+ extts_request.index = index;
extts_request.flags = PTP_ENABLE_FEATURE;
if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) {
perror("PTP_EXTTS_REQUEST");
return -1;
}
memset(&perout_request, 0, sizeof(perout_request));
- perout_request.index = 0;
+ perout_request.index = index;
perout_request.start.sec = ts.tv_sec + 2;
perout_request.start.nsec = 0;
perout_request.period.sec = 0;
- hints for debugging on s390 systems.
driver-model.txt
- information on s390 devices and the driver model.
+kvm.txt
+ - ioctl calls to /dev/kvm on s390.
monreader.txt
- information on accessing the z/VM monitor stream from Linux.
+qeth.txt
+ - HiperSockets Bridge Port Support.
s390dbf.txt
- information on using the s390 debug feature.
-TAPE
- - information on the driver for channel-attached tapes.
-zfcpdump
+zfcpdump.txt
- information on the s390 SCSI dump tool.
- this file.
sched-arch.txt
- CPU Scheduler implementation hints for architecture specific code.
+sched-bwc.txt
+ - CFS bandwidth control overview.
sched-design-CFS.txt
- goals, design and implementation of the Completely Fair Scheduler.
sched-domains.txt
- info on WorkBiT NinjaSCSI-32/32Bi driver
aacraid.txt
- Driver supporting Adaptec RAID controllers
+advansys.txt
+ - List of Advansys Host Adapters
aha152x.txt
- info on driver for Adaptec AHA152x based adapters
aic79xx.txt
- info on driver for Adaptec controllers
arcmsr_spec.txt
- ARECA FIRMWARE SPEC (for IOP331 adapter)
+bfa.txt
+ - Brocade FC/FCOE adapter driver.
+bnx2fc.txt
+ - FCoE hardware offload for Broadcom network interfaces.
+cxgb3i.txt
+ - Chelsio iSCSI Linux Driver
dc395x.txt
- README file for the dc395x SCSI driver
dpti.txt
- info on driver for DTC 2x80 based adapters
g_NCR5380.txt
- info on driver for NCR5380 and NCR53c400 based adapters
+hpsa.txt
+ - HP Smart Array Controller SCSI driver.
hptiop.txt
- HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
in2000.txt
- info on in2000 driver
libsas.txt
- Serial Attached SCSI management layer.
+link_power_management_policy.txt
+ - Link power management options.
lpfc.txt
- LPFC driver release notes
megaraid.txt
- Common Management Module, shared code handling ioctls for LSI drivers
ncr53c8xx.txt
- info on driver for NCR53c8xx based adapters
+osd.txt
+ Object-Based Storage Device, command set introduction.
osst.txt
- info on driver for OnStream SC-x0 SCSI tape
ppa.txt
- README for the SCSI media changer driver
scsi-generic.txt
- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
+scsi-parameters.txt
+ - List of SCSI-parameters to pass to the kernel at module load-time.
scsi.txt
- short blurb on using SCSI support as a module.
scsi_mid_low_api.txt
- info on Cyclades-Z firmware loading.
digiepca.txt
- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
-hayes-esp.txt
- - info on using the Hayes ESP serial driver.
+driver
+ - intro to the low level serial driver.
moxa-smartio
- file with info on installing/using Moxa multiport serial driver.
+n_gsm.txt
+ - GSM 0710 tty multiplexer howto.
riscom8.txt
- notes on using the RISCom/8 multi-port serial driver.
rocket.txt
--- /dev/null
+00-INDEX
+ - this file.
+Makefile
+ - Makefile for the example sourcefiles.
+butterfly
+ - AVR Butterfly SPI driver overview and pin configuration.
+ep93xx_spi
+ - Basic EP93xx SPI driver configuration.
+pxa2xx
+ - PXA2xx SPI master controller build by spi_message fifo wq
+spidev
+ - Intro to the userspace API for spi devices
+spidev_fdx.c
+ - spidev example file
+spi-lm70llp
+ - Connecting an LM70-LLP sensor to the kernel via the SPI subsys.
+spi-sc18is602
+ - NXP SC18IS602/603 I2C-bus to SPI bridge
+spi-summary
+ - (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here.
+spidev_test.c
+ - SPI testing utility.
queuing transfers that arrive in the meantime. When the driver is
finished with this message, it must call
spi_finalize_current_message() so the subsystem can issue the next
- transfer. This may sleep.
+ message. This may sleep.
+
+ master->transfer_one(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *transfer)
+ The subsystem calls the driver to transfer a single transfer while
+ queuing transfers that arrive in the meantime. When the driver is
+ finished with this transfer, it must call
+ spi_finalize_current_transfer() so the subsystem can issue the next
+ transfer. This may sleep. Note: transfer_one and transfer_one_message
+ are mutually exclusive; when both are set, the generic subsystem does
+ not call your transfer_one callback.
+
+ Return values:
+ negative errno: error
+ 0: transfer is finished
+ 1: transfer is still in progress
DEPRECATED METHODS
- sample hpet timer test program
hrtimers.txt
- subsystem for high-resolution kernel timers
+Makefile
+ - Build and link hpet_example
NO_HZ.txt
- Summary of the different methods for the scheduler clock-interrupts management.
timers-howto.txt
- the paravirtualization interface on PowerPC.
review-checklist.txt
- review checklist for KVM patches.
+s390-diag.txt
+ - Diagnose hypercall description (for IBM S/390)
timekeeping.txt
- timekeeping virtualization for x86-based architectures.
- explains what hwpoison is
ksm.txt
- how to use the Kernel Samepage Merging feature.
-locking
- - info on how locking and synchronization is done in the Linux vm code.
numa
- information about NUMA specific code in the Linux vm.
numa_memory_policy.txt
- a short users guide for SLUB.
soft-dirty.txt
- short explanation for soft-dirty PTEs
+split_page_table_lock
+ - Separate per-table lock to improve scalability of the old page_table_lock.
transhuge.txt
- Transparent Hugepage Support, alternative way of using hugepages.
unevictable-lru.txt
- The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
ds2490
- The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
-mxc_w1
+mxc-w1
- W1 master controller driver found on Freescale MX2/MX3 SoCs
+omap-hdq
+ - HDQ/1-wire module of TI OMAP 2430/3430.
w1-gpio
- GPIO 1-wire bus master driver.
- The Maxim/Dallas Semiconductor ds18*20 temperature sensor.
w1_ds2423
- The Maxim/Dallas Semiconductor ds2423 counter device.
+w1_ds28e04
+ - The Maxim/Dallas Semiconductor ds28e04 eeprom.
00-INDEX
- this file
-mtrr.txt
- - how to use x86 Memory Type Range Registers to increase performance
+boot.txt
+ - List of boot protocol versions
+early-microcode.txt
+ - How to load microcode from an initrd-CPIO archive early to fix CPU issues.
+earlyprintk.txt
+ - Using earlyprintk with a USB2 debug port key.
+entry_64.txt
+ - Describe (some of the) kernel entry points for x86.
exception-tables.txt
- why and how Linux kernel uses exception tables on x86
+mtrr.txt
+ - how to use x86 Memory Type Range Registers to increase performance
+pat.txt
+ - Page Attribute Table intro and API
+usb-legacy-support.txt
+ - how to fix/avoid quirks when using emulated PS/2 mouse/keyboard.
+zero-page.txt
+ - layout of the first page of memory.
or if there is a problem with the translation.
Maintainer: Will Deacon <will.deacon@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
---------------------------------------------------------------------
Documentation/arm64/booting.txt 的中文翻译
译存在问题，请联系中文版维护者。
英文版维护者： Will Deacon <will.deacon@arm.com>
-中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版维护者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜 Fu Wei <wefu@redhat.com>
以下为正文
---------------------------------------------------------------------
必要性: 强制
-设å¤\87æ \91æ\95°æ\8d®å\9d\97ï¼\88dtbï¼\89大å°\8få¿\85é¡»ä¸\8d大äº\8e 2 MBï¼\8cä¸\94ä½\8däº\8eä»\8eå\86\85æ ¸æ\98 å\83\8fèµ·å§\8bç®\97起第ä¸\80个
-512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来
+设å¤\87æ \91æ\95°æ\8d®å\9d\97ï¼\88dtbï¼\89å¿\85é¡» 8 å\97è\8a\82对é½\90ï¼\8c并ä½\8däº\8eä»\8eå\86\85æ ¸æ\98 å\83\8fèµ·å§\8bç®\97起第ä¸\80个 512MB
+内，且不得跨越 2MB 对齐边界。这使得内核可以通过初始页表中的单个节描述符来
映射此数据块。
必要性: 强制
-已解压的内核映像包含一个 32 字节的头，内容如下：
+已解压的内核映像包含一个 64 字节的头，内容如下：
- u32 magic = 0x14000008; /* 跳转到 stext, 小端 */
- u32 res0 = 0; /* 保留 */
+ u32 code0; /* 可执行代码 */
+ u32 code1; /* 可执行代码 */
u64 text_offset; /* 映像装载偏移 */
+ u64 res0 = 0; /* 保留 */
u64 res1 = 0; /* 保留 */
u64 res2 = 0; /* 保留 */
+ u64 res3 = 0; /* 保留 */
+ u64 res4 = 0; /* 保留 */
+ u32 magic = 0x644d5241; /* 魔数, 小端, "ARM\x64" */
+ u32 res5 = 0; /* 保留 */
+
+
+映像头注释：
+
+- code0/code1 负责跳转到 stext.
映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM
的起始地址必须是以 2MB 对齐的。
外部高速缓存（如果存在）必须配置并禁用。
- 架构计时器
- CNTFRQ 必须设定为计时器的频率。
- 如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0)
- 必须置位。
+ CNTFRQ 必须设定为计时器的频率，且 CNTVOFF 必须设定为对所有 CPU
+ 都一致的值。如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的
+ EL1PCTEN (bit 0) 必须置位。
- 一致性
通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件
在一个更高的异常级别下初始化，以防止在 未知 状态下运行。
+以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的
+必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。
+
引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口：
- 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
- 数据块必须在每个 CPU 节点中包含以下内容：
-
- 1、‘enable-method’属性。目前，此字段支持的值仅为字符串“spin-table”。
-
- 2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。
+ 数据块必须在每个 CPU 节点中包含一个 ‘enable-method’ 属性，所
+ 支持的 enable-method 请见下文。
引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入
数据块。
-- 任何辅助 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
+- enable-method 为 “spin-table” 的 CPU 必须在它们的 CPU
+ 节点中包含一个 ‘cpu-release-addr’ 属性。这个属性标识了一个
+ 64 位自然对齐且初始化为零的内存位置。
+
+ 这些 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须
包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将
发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
- 时，CPU 必须直接跳入此值所指向的地址。
+ 时，CPU 必须跳入此值所指向的地址。此值为一个单独的 64 位小端值，
+ 因此 CPU 须在跳转前将所读取的值转换为其本身的端模式。
+
+- enable-method 为 “psci” 的 CPU 保持在内核外（比如，在
+ memory 节点中描述为内核空间的内存区外，或在通过设备树 /memreserve/
+ 域中描述为内核保留区的空间中）。内核将会发起在 ARM 文档（编号
+ ARM DEN 0022A：用于 ARM 上的电源状态协调接口系统软件）中描述的
+ CPU_ON 调用来将 CPU 带入内核。
+
+ *译者注:到文档翻译时，此文档已更新为 ARM DEN 0022B。
+
+ 设备树必须包含一个 ‘psci’ 节点，请参考以下文档：
+ Documentation/devicetree/bindings/arm/psci.txt
+
- 辅助 CPU 通用寄存器设置
x0 = 0 (保留，将来可能使用)
or if there is a problem with the translation.
Maintainer: Catalin Marinas <catalin.marinas@arm.com>
-Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
---------------------------------------------------------------------
Documentation/arm64/memory.txt 的中文翻译
译存在问题，请联系中文版维护者。
英文版维护者： Catalin Marinas <catalin.marinas@arm.com>
-中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
-中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
+中文版维护者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜 Fu Wei <wefu@redhat.com>
以下为正文
---------------------------------------------------------------------
TTBR1 中，且从不写入 TTBR0。
-AArch64 Linux 内存布局：
+AArch64 Linux å\9c¨é¡µå¤§å°\8f为 4KB æ\97¶ç\9a\84å\86\85å\98å¸\83å±\80ï¼\9a
起始地址 结束地址 大小 用途
-----------------------------------------------------------------------
ffffffbe00000000 ffffffbffbbfffff ~8GB [防护页，未来用于 vmmemap]
+ffffffbffbc00000 ffffffbffbdfffff 2MB earlyprintk 设备
+
ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O 空间
-ffffffbbffff0000 ffffffbcffffffff ~2MB [防护页]
+ffffffbffbe10000 ffffffbcffffffff ~2MB [防护页]
ffffffbffc000000 ffffffbfffffffff 64MB 模块
ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射
+AArch64 Linux 在页大小为 64KB 时的内存布局：
+
+起始地址 结束地址 大小 用途
+-----------------------------------------------------------------------
+0000000000000000 000003ffffffffff 4TB 用户空间
+
+fffffc0000000000 fffffdfbfffeffff ~2TB vmalloc
+
+fffffdfbffff0000 fffffdfbffffffff 64KB [防护页]
+
+fffffdfc00000000 fffffdfdffffffff 8GB vmemmap
+
+fffffdfe00000000 fffffdfffbbfffff ~8GB [防护页，未来用于 vmmemap]
+
+fffffdfffbc00000 fffffdfffbdfffff 2MB earlyprintk 设备
+
+fffffdfffbe00000 fffffdfffbe0ffff 64KB PCI I/O 空间
+
+fffffdfffbe10000 fffffdfffbffffff ~2MB [防护页]
+
+fffffdfffc000000 fffffdffffffffff 64MB 模块
+
+fffffe0000000000 ffffffffffffffff 2TB 内核逻辑内存映射
+
+
4KB 页大小的转换表查找：
+--------+--------+--------+--------+--------+--------+--------+--------+
| | +--------------------------> [41:29] L2 索引 (仅使用 38:29 )
| +-------------------------------> [47:42] L1 索引 (未使用)
+-------------------------------------------------> [63] TTBR0/1
+
+当使用 KVM 时, 管理程序（hypervisor）在 EL2 中通过相对内核虚拟地址的
+一个固定偏移来映射内核页（内核虚拟地址的高 24 位设为零）:
+
+起始地址 结束地址 大小 用途
+-----------------------------------------------------------------------
+0000004000000000 0000007fffffffff 256GB 在 HYP 中映射的内核对象
--- /dev/null
+Chinese translated version of Documentation/arm64/tagged-pointers.txt
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly. However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help. Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+---------------------------------------------------------------------
+Documentation/arm64/tagged-pointers.txt 的中文翻译
+
+如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
+交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
+译存在问题，请联系中文版维护者。
+
+英文版维护者： Will Deacon <will.deacon@arm.com>
+中文版维护者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com>
+中文版校译者： 傅炜 Fu Wei <wefu@redhat.com>
+
+以下为正文
+---------------------------------------------------------------------
+ Linux 在 AArch64 中带标记的虚拟地址
+ =================================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2013 年 06 月 12 日
+
+本文档简述了在 AArch64 地址转换系统中提供的带标记的虚拟地址及其在
+AArch64 Linux 中的潜在用途。
+
+内核提供的地址转换表配置使通过 TTBR0 完成的虚拟地址转换（即用户空间
+映射），其虚拟地址的最高 8 位（63:56）会被转换硬件所忽略。这种机制
+让这些位可供应用程序自由使用，其注意事项如下：
+
+ (1) 内核要求所有传递到 EL1 的用户空间地址带有 0x00 标记。
+ 这意味着任何携带用户空间虚拟地址的系统调用（syscall）
+ 参数 *必须* 在陷入内核前使它们的最高字节被清零。
+
+ (2) 非零标记在传递信号时不被保存。这意味着在应用程序中利用了
+ 标记的信号处理函数无法依赖 siginfo_t 的用户空间虚拟
+ 地址所携带的包含其内部域信息的标记。此规则的一个例外是
+ 当信号是在调试观察点的异常处理程序中产生的，此时标记的
+ 信息将被保存。
+
+ (3) 当使用带标记的指针时需特别留心，因为仅对两个虚拟地址
+ 的高字节，C 编译器很可能无法判断它们是不同的。
+
+此构架会阻止对带标记的 PC 指针的利用，因此在异常返回时，其高字节
+将被设置成一个为 “55” 的扩展符。
W: http://www.arm.linux.org.uk/
S: Maintained
+ARM/QUALCOMM SUPPORT
+M: Kumar Gala <galak@codeaurora.org>
+M: David Brown <davidb@codeaurora.org>
+L: linux-arm-msm@vger.kernel.org
+S: Maintained
+F: arch/arm/mach-qcom/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
+
ARM/RADISYS ENP2611 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
CPU FREQUENCY DRIVERS - ARM BIG LITTLE
M: Viresh Kumar <viresh.kumar@linaro.org>
-M: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
+M: Sudeep Holla <sudeep.holla@arm.com>
L: cpufreq@vger.kernel.org
L: linux-pm@vger.kernel.org
W: http://www.arm.com/products/processors/technologies/biglittleprocessing.php
L: intel-gfx@lists.freedesktop.org
L: dri-devel@lists.freedesktop.org
Q: http://patchwork.freedesktop.org/project/intel-gfx/
-T: git git://people.freedesktop.org/~danvet/drm-intel
+T: git git://anongit.freedesktop.org/drm-intel
S: Supported
F: drivers/gpu/drm/i915/
F: include/drm/i915*
F: drivers/net/ethernet/rdc/r6040.c
RDS - RELIABLE DATAGRAM SOCKETS
-M: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
+M: Chien Yen <chien.yen@oracle.com>
L: rds-devel@oss.oracle.com (moderated for non-subscribers)
S: Supported
F: net/rds/
VERSION = 3
PATCHLEVEL = 14
SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
NAME = Shuffling Zombie Juror
# *DOCUMENTATION*
config ARCH_MULTIPLATFORM
bool "Allow multiple platforms to be selected"
depends on MMU
+ select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
select COMMON_CLK
+ select GENERIC_CLOCKEVENTS
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
select USE_OF
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MSM_NODT
- bool "Qualcomm MSM"
- select ARCH_MSM
+config ARCH_MSM
+ bool "Qualcomm MSM (non-multiplatform)"
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK
select GENERIC_CLOCKEVENTS
config ARCH_MULTI_V6
bool "ARMv6 based platforms (ARM11)"
select ARCH_MULTI_V6_V7
- select CPU_V6
+ select CPU_V6K
config ARCH_MULTI_V7
bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
select CPU_V7
+ select HAVE_SMP
config ARCH_MULTI_V6_V7
bool
+ select MIGHT_HAVE_CACHE_L2X0
config ARCH_MULTI_CPU_AUTO
def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
endmenu
+config ARCH_VIRT
+ bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_PSCI
+ select HAVE_ARM_ARCH_TIMER
+
#
# This is sorted alphabetically by mach-* pathname. However, plat-*
# Kconfigs may be included either alphabetically (according to the
source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-qcom/Kconfig"
+
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
source "arch/arm/mach-vexpress/Kconfig"
source "arch/arm/plat-versatile/Kconfig"
-source "arch/arm/mach-virt/Kconfig"
-
source "arch/arm/mach-vt8500/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
config DEBUG_MSM_UART
bool
- depends on ARCH_MSM
+ depends on ARCH_MSM || ARCH_QCOM
config DEBUG_LL_INCLUDE
string
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
machine-$(CONFIG_ARCH_PXA) += pxa
+machine-$(CONFIG_ARCH_QCOM) += qcom
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
machine-$(CONFIG_ARCH_U8500) += ux500
machine-$(CONFIG_ARCH_VERSATILE) += versatile
machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
-machine-$(CONFIG_ARCH_VIRT) += virt
machine-$(CONFIG_ARCH_VT8500) += vt8500
machine-$(CONFIG_ARCH_W90X900) += w90x900
machine-$(CONFIG_ARCH_ZYNQ) += zynq
dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
# sama5d3
+dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
-dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
dra7-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
+ qcom-msm8960-cdp.dtb \
+ qcom-apq8074-dragonboard.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
--- /dev/null
+/*
+ * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
+ *
+ * Copyright (C) 2014 Atmel,
+ * 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+ model = "SAMA5D3 Xplained";
+ compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x20000000 0x10000000>;
+ };
+
+ ahb {
+ apb {
+ mmc0: mmc@f0000000 {
+ pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi0: spi@f0004000 {
+ cs-gpios = <&pioD 13 0>;
+ status = "okay";
+ };
+
+ can0: can@f000c000 {
+ status = "okay";
+ };
+
+ i2c0: i2c@f0014000 {
+ status = "okay";
+ };
+
+ i2c1: i2c@f0018000 {
+ status = "okay";
+ };
+
+ macb0: ethernet@f0028000 {
+ phy-mode = "rgmii";
+ status = "okay";
+ };
+
+ usart0: serial@f001c000 {
+ status = "okay";
+ };
+
+ usart1: serial@f0020000 {
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+ status = "okay";
+ };
+
+ uart0: serial@f0024000 {
+ status = "okay";
+ };
+
+ mmc1: mmc@f8000000 {
+ pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+ status = "okay";
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ spi1: spi@f8008000 {
+ cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
+ status = "okay";
+ };
+
+ adc0: adc@f8018000 {
+ pinctrl-0 = <
+ &pinctrl_adc0_adtrg
+ &pinctrl_adc0_ad0
+ &pinctrl_adc0_ad1
+ &pinctrl_adc0_ad2
+ &pinctrl_adc0_ad3
+ &pinctrl_adc0_ad4
+ &pinctrl_adc0_ad5
+ &pinctrl_adc0_ad6
+ &pinctrl_adc0_ad7
+ &pinctrl_adc0_ad8
+ &pinctrl_adc0_ad9
+ >;
+ status = "okay";
+ };
+
+ i2c2: i2c@f801c000 {
+ dmas = <0>, <0>; /* Do not use DMA for i2c2 */
+ status = "okay";
+ };
+
+ macb1: ethernet@f802c000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
+
+ dbgu: serial@ffffee00 {
+ status = "okay";
+ };
+
+ pinctrl@fffff200 {
+ board {
+ pinctrl_mmc0_cd: mmc0_cd {
+ atmel,pins =
+ <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_mmc1_cd: mmc1_cd {
+ atmel,pins =
+ <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ atmel,pins =
+ <AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
+ };
+ };
+ };
+
+ pmc: pmc@fffffc00 {
+ main: mainck {
+ clock-frequency = <12000000>;
+ };
+ };
+ };
+
+ nand0: nand@60000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ atmel,has-pmecc;
+ atmel,pmecc-cap = <4>;
+ atmel,pmecc-sector-size = <512>;
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x40000>;
+ };
+
+ bootloader@40000 {
+ label = "bootloader";
+ reg = <0x40000 0x80000>;
+ };
+
+ bootloaderenv@c0000 {
+ label = "bootloader env";
+ reg = <0xc0000 0xc0000>;
+ };
+
+ dtb@180000 {
+ label = "device tree";
+ reg = <0x180000 0x80000>;
+ };
+
+ kernel@200000 {
+ label = "kernel";
+ reg = <0x200000 0x600000>;
+ };
+
+ rootfs@800000 {
+ label = "rootfs";
+ reg = <0x800000 0x0f800000>;
+ };
+ };
+
+ usb0: gadget@00500000 {
+ atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
+ status = "okay";
+ };
+
+ usb1: ohci@00600000 {
+ num-ports = <3>;
+ atmel,vbus-gpio = <0
+ &pioE 3 GPIO_ACTIVE_LOW
+ &pioE 4 GPIO_ACTIVE_LOW
+ >;
+ status = "okay";
+ };
+
+ usb2: ehci@00700000 {
+ status = "okay";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ bp3 {
+ label = "PB_USER";
+ gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+ linux,code = <0x104>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ d2 {
+ label = "d2";
+ gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */
+ linux,default-trigger = "heartbeat";
+ };
+
+ d3 {
+ label = "d3";
+ gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
};
i2c0: i2c@fff88000 {
- compatible = "atmel,at91sam9263-i2c";
+ compatible = "atmel,at91sam9260-i2c";
reg = <0xfff88000 0x100>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
nand-on-flash-bbt;
status = "okay";
};
+
+ usb0: ohci@00500000 {
+ status = "okay";
+ };
};
leds {
bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
};
+ /* 24 MHz chrystal on the core module */
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* The UART clock is 14.74 MHz divided by an ICS525 */
+ uartclk: uartclk@14.74M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <14745600>;
+ };
+
syscon {
compatible = "arm,integrator-ap-syscon";
reg = <0x11000000 0x100>;
timer0: timer@13000000 {
compatible = "arm,integrator-timer";
+ clocks = <&xtal24mhz>;
};
timer1: timer@13000100 {
compatible = "arm,integrator-timer";
+ clocks = <&xtal24mhz>;
};
timer2: timer@13000200 {
compatible = "arm,integrator-timer";
+ clocks = <&xtal24mhz>;
};
pic: pic@14000000 {
rtc: rtc@15000000 {
compatible = "arm,pl030", "arm,primecell";
arm,primecell-periphid = <0x00041030>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
uart0: uart@16000000 {
compatible = "arm,pl010", "arm,primecell";
arm,primecell-periphid = <0x00041010>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
uart1: uart@17000000 {
compatible = "arm,pl010", "arm,primecell";
arm,primecell-periphid = <0x00041010>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
kmi0: kmi@18000000 {
compatible = "arm,pl050", "arm,primecell";
arm,primecell-periphid = <0x00041050>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
kmi1: kmi@19000000 {
compatible = "arm,pl050", "arm,primecell";
arm,primecell-periphid = <0x00041050>;
+ clocks = <&xtal24mhz>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
};
};
bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
};
+ /*
+ * The Integrator/CP overall clocking architecture can be found in
+ * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
+ * appear to illustrate the layout used in most configurations.
+ */
+
+ /* The codec chrystal operates at 24.576 MHz */
+ xtal_codec: xtal24.576@24.576M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24576000>;
+ };
+
+ /* The chrystal is divided by 2 by the codec for the AACI bit clock */
+ aaci_bitclk: aaci_bitclk@12.288M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <2>;
+ clock-mult = <1>;
+ clocks = <&xtal_codec>;
+ };
+
+ /* This is a 25MHz chrystal on the base board */
+ xtal25mhz: xtal25mhz@25M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ };
+
+ /* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
+ uartclk: uartclk@14.74M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <14745600>;
+ };
+
+ /* Actually sysclk I think */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ core-module@10000000 {
+ /* 24 MHz chrystal on the core module */
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ /*
+ * External oscillator on the core module, usually used
+ * to drive video circuitry. Driven from the 24MHz clock.
+ */
+ auxosc: cm_aux_osc@25M {
+ #clock-cells = <0>;
+ compatible = "arm,integrator-cm-auxosc";
+ clocks = <&xtal24mhz>;
+ };
+
+ /* The KMI clock is the 24 MHz oscillator divided to 8MHz */
+ kmiclk: kmiclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <3>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* The timer clock is the 24 MHz oscillator divided to 1MHz */
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+ };
+
syscon {
compatible = "arm,integrator-cp-syscon";
reg = <0xcb000000 0x100>;
};
timer0: timer@13000000 {
- /* TIMER0 runs @ 25MHz */
+ /* TIMER0 runs directly on the 25MHz chrystal */
compatible = "arm,integrator-cp-timer";
- status = "disabled";
+ clocks = <&xtal25mhz>;
};
timer1: timer@13000100 {
/* TIMER1 runs @ 1MHz */
compatible = "arm,integrator-cp-timer";
+ clocks = <&timclk>;
};
timer2: timer@13000200 {
/* TIMER2 runs @ 1MHz */
compatible = "arm,integrator-cp-timer";
+ clocks = <&timclk>;
};
pic: pic@14000000 {
*/
rtc@15000000 {
compatible = "arm,pl031", "arm,primecell";
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
uart@16000000 {
compatible = "arm,pl011", "arm,primecell";
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
uart@17000000 {
compatible = "arm,pl011", "arm,primecell";
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
};
kmi@18000000 {
compatible = "arm,pl050", "arm,primecell";
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
kmi@19000000 {
compatible = "arm,pl050", "arm,primecell";
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
};
/*
reg = <0x1c000000 0x1000>;
interrupts = <23 24>;
max-frequency = <515633>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
};
aaci@1d000000 {
compatible = "arm,pl041", "arm,primecell";
reg = <0x1d000000 0x1000>;
interrupts = <25>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
};
clcd@c0000000 {
compatible = "arm,pl110", "arm,primecell";
reg = <0xC0000000 0x1000>;
interrupts = <22>;
+ clocks = <&auxosc>, <&pclk>;
+ clock-names = "clcd", "apb_pclk";
};
};
};
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+#include "qcom-msm8660.dtsi"
/ {
model = "Qualcomm MSM8660 SURF";
compatible = "qcom,msm8660-surf", "qcom,msm8660";
- interrupt-parent = <&intc>;
-
- intc: interrupt-controller@2080000 {
- compatible = "qcom,msm-8660-qgic";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = < 0x02080000 0x1000 >,
- < 0x02081000 0x1000 >;
- };
-
- timer@2000000 {
- compatible = "qcom,scss-timer", "qcom,msm-timer";
- interrupts = <1 0 0x301>,
- <1 1 0x301>,
- <1 2 0x301>;
- reg = <0x02000000 0x100>;
- clock-frequency = <27000000>,
- <32768>;
- cpu-offset = <0x40000>;
- };
-
- msmgpio: gpio@800000 {
- compatible = "qcom,msm-gpio";
- reg = <0x00800000 0x4000>;
- gpio-controller;
- #gpio-cells = <2>;
- ngpio = <173>;
- interrupts = <0 16 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- };
-
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-msm8660";
- #clock-cells = <1>;
- #reset-cells = <1>;
- reg = <0x900000 0x4000>;
- };
-
- serial@19c40000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x19c40000 0x1000>,
- <0x19c00000 0x1000>;
- interrupts = <0 195 0x0>;
- clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
- clock-names = "core", "iface";
- };
-
- qcom,ssbi@500000 {
- compatible = "qcom,ssbi";
- reg = <0x500000 0x1000>;
- qcom,controller-type = "pmic-arbiter";
- };
};
--- /dev/null
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8660.h>
+
+/ {
+ model = "Qualcomm MSM8660";
+ compatible = "qcom,msm8660";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@2080000 {
+ compatible = "qcom,msm-8660-qgic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0x02080000 0x1000 >,
+ < 0x02081000 0x1000 >;
+ };
+
+ timer@2000000 {
+ compatible = "qcom,scss-timer", "qcom,msm-timer";
+ interrupts = <1 0 0x301>,
+ <1 1 0x301>,
+ <1 2 0x301>;
+ reg = <0x02000000 0x100>;
+ clock-frequency = <27000000>,
+ <32768>;
+ cpu-offset = <0x40000>;
+ };
+
+ msmgpio: gpio@800000 {
+ compatible = "qcom,msm-gpio";
+ reg = <0x00800000 0x4000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpio = <173>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-msm8660";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x900000 0x4000>;
+ };
+
+ serial@19c40000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x19c40000 0x1000>,
+ <0x19c00000 0x1000>;
+ interrupts = <0 195 0x0>;
+ clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+};
-/dts-v1/;
-
-/include/ "skeleton.dtsi"
-
-#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+#include "qcom-msm8960.dtsi"
/ {
model = "Qualcomm MSM8960 CDP";
compatible = "qcom,msm8960-cdp", "qcom,msm8960";
- interrupt-parent = <&intc>;
-
- intc: interrupt-controller@2000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = < 0x02000000 0x1000 >,
- < 0x02002000 0x1000 >;
- };
-
- timer@200a000 {
- compatible = "qcom,kpss-timer", "qcom,msm-timer";
- interrupts = <1 1 0x301>,
- <1 2 0x301>,
- <1 3 0x301>;
- reg = <0x0200a000 0x100>;
- clock-frequency = <27000000>,
- <32768>;
- cpu-offset = <0x80000>;
- };
-
- msmgpio: gpio@800000 {
- compatible = "qcom,msm-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- ngpio = <150>;
- interrupts = <0 16 0x4>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x800000 0x4000>;
- };
-
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-msm8960";
- #clock-cells = <1>;
- #reset-cells = <1>;
- reg = <0x900000 0x4000>;
- };
-
- clock-controller@4000000 {
- compatible = "qcom,mmcc-msm8960";
- reg = <0x4000000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- serial@16440000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16440000 0x1000>,
- <0x16400000 0x1000>;
- interrupts = <0 154 0x0>;
- clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- };
-
- qcom,ssbi@500000 {
- compatible = "qcom,ssbi";
- reg = <0x500000 0x1000>;
- qcom,controller-type = "pmic-arbiter";
- };
};
--- /dev/null
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+
+#include <dt-bindings/clock/qcom,gcc-msm8960.h>
+
+/ {
+ model = "Qualcomm MSM8960";
+ compatible = "qcom,msm8960";
+ interrupt-parent = <&intc>;
+
+ intc: interrupt-controller@2000000 {
+ compatible = "qcom,msm-qgic2";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = < 0x02000000 0x1000 >,
+ < 0x02002000 0x1000 >;
+ };
+
+ timer@200a000 {
+ compatible = "qcom,kpss-timer", "qcom,msm-timer";
+ interrupts = <1 1 0x301>,
+ <1 2 0x301>,
+ <1 3 0x301>;
+ reg = <0x0200a000 0x100>;
+ clock-frequency = <27000000>,
+ <32768>;
+ cpu-offset = <0x80000>;
+ };
+
+ msmgpio: gpio@800000 {
+ compatible = "qcom,msm-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpio = <150>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x800000 0x4000>;
+ };
+
+ gcc: clock-controller@900000 {
+ compatible = "qcom,gcc-msm8960";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x900000 0x4000>;
+ };
+
+ clock-controller@4000000 {
+ compatible = "qcom,mmcc-msm8960";
+ reg = <0x4000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ serial@16440000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x16440000 0x1000>,
+ <0x16400000 0x1000>;
+ interrupts = <0 154 0x0>;
+ clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+ clock-names = "core", "iface";
+ };
+
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x500000 0x1000>;
+ qcom,controller-type = "pmic-arbiter";
+ };
+};
clock-output-names = "extal";
};
+ /*
+ * The external audio clocks are configured as 0 Hz fixed frequency clocks by
+ * default. Boards that provide audio clocks should override them.
+ */
+ audio_clk_a: audio_clk_a {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_a";
+ };
+ audio_clk_b: audio_clk_b {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_b";
+ };
+ audio_clk_c: audio_clk_c {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ clock-output-names = "audio_clk_c";
+ };
+
/* Special CPG clocks */
cpg_clocks: cpg_clocks@e6150000 {
compatible = "renesas,r8a7790-cpg-clocks",
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
+ clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
<&uhpck>;
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
- osc: osc1 {
+ osc1: osc1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ osc2: osc2 {
#clock-cells = <0>;
compatible = "fixed-clock";
};
f2s_periph_ref_clk: f2s_periph_ref_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <10000000>;
+ };
+
+ f2s_sdram_ref_clk: f2s_sdram_ref_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
};
main_pll: main_pll {
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
- clocks = <&osc>;
+ clocks = <&osc1>;
reg = <0x40>;
mpuclk: mpuclk {
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
- clocks = <&osc>;
+ clocks = <&osc1>, <&osc2>, <&f2s_periph_ref_clk>;
reg = <0x80>;
emac0_clk: emac0_clk {
#size-cells = <0>;
#clock-cells = <0>;
compatible = "altr,socfpga-pll-clock";
- clocks = <&osc>;
+ clocks = <&osc1>, <&osc2>, <&f2s_sdram_ref_clk>;
reg = <0xC0>;
ddr_dqs_clk: ddr_dqs_clk {
arm,data-latency = <2 1 1>;
};
+ mmc: dwmmc0@ff704000 {
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff704000 0x1000>;
+ interrupts = <0 139 4>;
+ fifo-depth = <0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+ clock-names = "biu", "ciu";
+ };
+
/* Local timer */
timer@fffec600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xffd05000 0x1000>;
};
- sysmgr@ffd08000 {
- compatible = "altr,sys-mgr";
- reg = <0xffd08000 0x4000>;
- };
+ sysmgr: sysmgr@ffd08000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd08000 0x4000>;
+ };
};
};
};
};
+ dwmmc0@ff704000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
serial0@ffc02000 {
clock-frequency = <100000000>;
};
};
};
+ dwmmc0@ff704000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
ethernet@ff702000 {
phy-mode = "rgmii";
phy-addr = <0xffffffff>; /* probe for phy addr */
};
};
+ dwmmc0@ff704000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
ethernet@ff700000 {
phy-mode = "gmii";
status = "okay";
msp2: msp@80117000 {
pinctrl-names = "default";
pinctrl-0 = <&msp2_default_mode>;
- status = "okay";
};
msp3: msp@80125000 {
compatible = "fixed-clock";
clock-frequency = <100000000>;
};
+
+ CLKS_GMAC0_PHY: clockgenA1@7 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "CLKS_GMAC0_PHY";
+ };
+
+ CLKS_ETH1_PHY: clockgenA0@7 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "CLKS_ETH1_PHY";
+ };
};
};
* publishhed by the Free Software Foundation.
*/
#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
aliases {
#size-cells = <1>;
compatible = "st,stih415-sbc-pinctrl";
st,syscfg = <&syscfg_sbc>;
+ reg = <0xfe61f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-names = "irqmux";
ranges = <0 0xfe610000 0x5000>;
PIO0: gpio@fe610000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO0";
};
PIO1: gpio@fe611000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO1";
};
PIO2: gpio@fe612000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO2";
};
PIO3: gpio@fe613000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO3";
};
PIO4: gpio@fe614000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO4";
};
};
};
};
+
+ rc{
+ pinctrl_ir: ir0 {
+ st,pins {
+ ir = <&PIO4 0 ALT2 IN>;
+ };
+ };
+ };
+
+ gmac1 {
+ pinctrl_mii1: mii1 {
+ st,pins {
+ txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&PIO0 7 ALT1 IN BYPASS 1000>;
+ mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&PIO2 3 ALT1 IN NICLK 1000 CLK_A>;
+ };
+ };
+
+ pinctrl_rgmii1: rgmii1-0 {
+ st,pins {
+ txd0 = <&PIO0 0 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd1 = <&PIO0 1 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd2 = <&PIO0 2 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd3 = <&PIO0 3 ALT1 OUT DE_IO 1000 CLK_A>;
+ txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
+ mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
+ rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>;
+ rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>;
+ rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>;
+ rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>;
+
+ rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>;
+ rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>;
+
+ clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+ };
+ };
+ };
};
pin-controller-front {
#size-cells = <1>;
compatible = "st,stih415-front-pinctrl";
st,syscfg = <&syscfg_front>;
+ reg = <0xfee0f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-names = "irqmux";
ranges = <0 0xfee00000 0x8000>;
PIO5: gpio@fee00000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO5";
};
PIO6: gpio@fee01000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO6";
};
PIO7: gpio@fee02000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO7";
};
PIO8: gpio@fee03000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO8";
};
PIO9: gpio@fee04000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO9";
};
PIO10: gpio@fee05000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO10";
};
PIO11: gpio@fee06000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x6000 0x100>;
st,bank-name = "PIO11";
};
PIO12: gpio@fee07000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x7000 0x100>;
st,bank-name = "PIO12";
};
#size-cells = <1>;
compatible = "st,stih415-rear-pinctrl";
st,syscfg = <&syscfg_rear>;
+ reg = <0xfe82f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-names = "irqmux";
ranges = <0 0xfe820000 0x8000>;
PIO13: gpio@fe820000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO13";
};
PIO14: gpio@fe821000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO14";
};
PIO15: gpio@fe822000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO15";
};
PIO16: gpio@fe823000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO16";
};
PIO17: gpio@fe824000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO17";
};
PIO18: gpio@fe825000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO18";
};
};
};
};
+
+ gmac0{
+ pinctrl_mii0: mii0 {
+ st,pins {
+ mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
+ txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+
+ txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+ txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+
+ txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
+ col = <&PIO15 3 ALT2 IN BYPASS 1000>;
+ mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>;
+ mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+ rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
+ phyclk = <&PIO13 5 ALT2 OUT NICLK 1000 CLK_A>;
+
+ };
+ };
+
+ pinctrl_gmii0: gmii0 {
+ st,pins {
+ mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
+ mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>;
+ mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
+ txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+
+ txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd4 = <&PIO14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd5 = <&PIO14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd6 = <&PIO14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd7 = <&PIO14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+
+ txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
+ col = <&PIO15 3 ALT2 IN BYPASS 1000>;
+ rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+
+ rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd4 = <&PIO16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd5 = <&PIO16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd6 = <&PIO16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd7 = <&PIO16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+
+ rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
+ clk125 = <&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>;
+
+
+ };
+ };
+ };
};
pin-controller-left {
#size-cells = <1>;
compatible = "st,stih415-left-pinctrl";
st,syscfg = <&syscfg_left>;
+ reg = <0xfd6bf080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>;
PIO100: gpio@fd6b0000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO100";
};
PIO101: gpio@fd6b1000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO101";
};
PIO102: gpio@fd6b2000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO102";
};
#size-cells = <1>;
compatible = "st,stih415-right-pinctrl";
st,syscfg = <&syscfg_right>;
+ reg = <0xfd33f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-names = "irqmux";
ranges = <0 0xfd330000 0x5000>;
PIO103: gpio@fd330000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO103";
};
PIO104: gpio@fd331000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO104";
};
PIO105: gpio@fd332000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO105";
};
PIO106: gpio@fd333000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO106";
};
PIO107: gpio@fd334000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO107";
};
#include "stih415-clock.dtsi"
#include "stih415-pinctrl.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/stih415-resets.h>
/ {
L2: cache-controller {
ranges;
compatible = "simple-bus";
+ powerdown: powerdown-controller {
+ #reset-cells = <1>;
+ compatible = "st,stih415-powerdown";
+ };
+
+ softreset: softreset-controller {
+ #reset-cells = <1>;
+ compatible = "st,stih415-softreset";
+ };
+
syscfg_sbc: sbc-syscfg@fe600000{
compatible = "st,stih415-sbc-syscfg", "syscon";
reg = <0xfe600000 0xb4>;
status = "disabled";
};
+
+ ethernet0: dwmac@fe810000 {
+ device_type = "network";
+ compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
+ status = "disabled";
+
+ reg = <0xfe810000 0x8000>, <0x148 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+
+ interrupts = <0 147 0>, <0 148 0>, <0 149 0>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+ resets = <&softreset STIH415_ETH0_SOFTRESET>;
+ reset-names = "stmmaceth";
+
+ snps,pbl = <32>;
+ snps,mixed-burst;
+ snps,force_sf_dma_mode;
+
+ st,syscon = <&syscfg_rear>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mii0>;
+ clock-names = "stmmaceth";
+ clocks = <&CLKS_GMAC0_PHY>;
+ };
+
+ ethernet1: dwmac@fef08000 {
+ device_type = "network";
+ compatible = "st,stih415-dwmac", "snps,dwmac", "snps,dwmac-3.610";
+ status = "disabled";
+ reg = <0xfef08000 0x8000>, <0x74 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+ interrupts = <0 150 0>, <0 151 0>, <0 152 0>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+ snps,pbl = <32>;
+ snps,mixed-burst;
+ snps,force_sf_dma_mode;
+
+ st,syscon = <&syscfg_sbc>;
+
+ resets = <&softreset STIH415_ETH1_SOFTRESET>;
+ reset-names = "stmmaceth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mii1>;
+ clock-names = "stmmaceth";
+ clocks = <&CLKS_ETH1_PHY>;
+ };
+
+ rc: rc@fe518000 {
+ compatible = "st,comms-irb";
+ reg = <0xfe518000 0x234>;
+ interrupts = <0 203 0>;
+ clocks = <&CLK_SYSIN>;
+ rx-mode = "infrared";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ir>;
+ resets = <&softreset STIH415_IRB_SOFTRESET>;
+ };
};
};
clock-frequency = <100000000>;
clock-output-names = "CLK_S_ICN_REG_0";
};
+
+ CLK_S_GMAC0_PHY: clockgenA1@7 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "CLK_S_GMAC0_PHY";
+ };
+
+ CLK_S_ETH1_PHY: clockgenA0@7 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ clock-output-names = "CLK_S_ETH1_PHY";
+ };
};
};
* publishhed by the Free Software Foundation.
*/
#include "st-pincfg.h"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
aliases {
#size-cells = <1>;
compatible = "st,stih416-sbc-pinctrl";
st,syscfg = <&syscfg_sbc>;
+ reg = <0xfe61f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-names = "irqmux";
ranges = <0 0xfe610000 0x6000>;
PIO0: gpio@fe610000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO0";
};
PIO1: gpio@fe611000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO1";
};
PIO2: gpio@fe612000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO2";
};
PIO3: gpio@fe613000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO3";
};
PIO4: gpio@fe614000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO4";
};
PIO40: gpio@fe615000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO40";
st,retime-pin-mask = <0x7f>;
};
+ rc{
+ pinctrl_ir: ir0 {
+ st,pins {
+ ir = <&PIO4 0 ALT2 IN>;
+ };
+ };
+ };
sbc_serial1 {
pinctrl_sbc_serial1: sbc_serial1 {
st,pins {
};
};
};
+
+ gmac1 {
+ pinctrl_mii1: mii1 {
+ st,pins {
+ txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&PIO0 7 ALT1 IN BYPASS 1000>;
+
+ mdio = <&PIO1 0 ALT1 OUT BYPASS 1500>;
+ mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+ rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
+ };
+ };
+ pinctrl_rgmii1: rgmii1-0 {
+ st,pins {
+ txd0 = <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>;
+ txd1 = <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>;
+ txd2 = <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>;
+ txd3 = <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>;
+ txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
+
+ mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
+ rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>;
+ rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>;
+ rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>;
+ rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>;
+
+ rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>;
+ rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>;
+
+ clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+ };
+ };
+ };
};
pin-controller-front {
#size-cells = <1>;
compatible = "st,stih416-front-pinctrl";
st,syscfg = <&syscfg_front>;
+ reg = <0xfee0f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-names = "irqmux";
ranges = <0 0xfee00000 0x10000>;
PIO5: gpio@fee00000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO5";
};
PIO6: gpio@fee01000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO6";
};
PIO7: gpio@fee02000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO7";
};
PIO8: gpio@fee03000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO8";
};
PIO9: gpio@fee04000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO9";
};
PIO10: gpio@fee05000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO10";
};
PIO11: gpio@fee06000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x6000 0x100>;
st,bank-name = "PIO11";
};
PIO12: gpio@fee07000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x7000 0x100>;
st,bank-name = "PIO12";
};
PIO30: gpio@fee08000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x8000 0x100>;
st,bank-name = "PIO30";
};
PIO31: gpio@fee09000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x9000 0x100>;
st,bank-name = "PIO31";
};
#size-cells = <1>;
compatible = "st,stih416-rear-pinctrl";
st,syscfg = <&syscfg_rear>;
+ reg = <0xfe82f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-names = "irqmux";
ranges = <0 0xfe820000 0x6000>;
PIO13: gpio@fe820000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO13";
};
PIO14: gpio@fe821000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO14";
};
PIO15: gpio@fe822000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO15";
};
PIO16: gpio@fe823000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO16";
};
PIO17: gpio@fe824000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO17";
};
PIO18: gpio@fe825000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x5000 0x100>;
st,bank-name = "PIO18";
st,retime-pin-mask = <0xf>;
};
};
};
+
+ gmac0 {
+ pinctrl_mii0: mii0 {
+ st,pins {
+ mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
+ txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+ txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+
+ txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
+ col = <&PIO15 3 ALT2 IN BYPASS 1000>;
+ mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>;
+ mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+ rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
+ phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>;
+ };
+ };
+
+ pinctrl_gmii0: gmii0 {
+ st,pins {
+ };
+ };
+ pinctrl_rgmii0: rgmii0 {
+ st,pins {
+ phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>;
+ txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>;
+ txd0 = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>;
+ txd1 = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>;
+ txd2 = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>;
+ txd3 = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>;
+ txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
+
+ mdio = <&PIO15 4 ALT2 OUT BYPASS 0>;
+ mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+ rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>;
+ rxd0 =<&PIO16 0 ALT2 IN DE_IO 500 CLK_A>;
+ rxd1 =<&PIO16 1 ALT2 IN DE_IO 500 CLK_A>;
+ rxd2 =<&PIO16 2 ALT2 IN DE_IO 500 CLK_A>;
+ rxd3 =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>;
+ rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
+
+ clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
+ };
+ };
+ };
};
pin-controller-fvdp-fe {
#size-cells = <1>;
compatible = "st,stih416-fvdp-fe-pinctrl";
st,syscfg = <&syscfg_fvdp_fe>;
+ reg = <0xfd6bf080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>;
PIO100: gpio@fd6b0000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO100";
};
PIO101: gpio@fd6b1000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO101";
};
PIO102: gpio@fd6b2000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO102";
};
#size-cells = <1>;
compatible = "st,stih416-fvdp-lite-pinctrl";
st,syscfg = <&syscfg_fvdp_lite>;
+ reg = <0xfd33f080 0x4>;
+ reg-names = "irqmux";
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts-names = "irqmux";
ranges = <0 0xfd330000 0x5000>;
PIO103: gpio@fd330000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0 0x100>;
st,bank-name = "PIO103";
};
PIO104: gpio@fd331000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x1000 0x100>;
st,bank-name = "PIO104";
};
PIO105: gpio@fd332000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x2000 0x100>;
st,bank-name = "PIO105";
};
PIO106: gpio@fd333000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x3000 0x100>;
st,bank-name = "PIO106";
};
PIO107: gpio@fd334000 {
gpio-controller;
#gpio-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
reg = <0x4000 0x100>;
st,bank-name = "PIO107";
st,retime-pin-mask = <0xf>;
#include "stih416-clock.dtsi"
#include "stih416-pinctrl.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset-controller/stih416-resets.h>
/ {
L2: cache-controller {
compatible = "arm,pl310-cache";
ranges;
compatible = "simple-bus";
+ powerdown: powerdown-controller {
+ #reset-cells = <1>;
+ compatible = "st,stih416-powerdown";
+ };
+
+ softreset: softreset-controller {
+ #reset-cells = <1>;
+ compatible = "st,stih416-softreset";
+ };
+
syscfg_sbc:sbc-syscfg@fe600000{
compatible = "st,stih416-sbc-syscfg", "syscon";
reg = <0xfe600000 0x1000>;
status = "disabled";
};
+
+ ethernet0: dwmac@fe810000 {
+ device_type = "network";
+ compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+ status = "disabled";
+ reg = <0xfe810000 0x8000>, <0x8bc 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+
+ interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+ snps,pbl = <32>;
+ snps,mixed-burst;
+
+ st,syscon = <&syscfg_rear>;
+ resets = <&softreset STIH416_ETH0_SOFTRESET>;
+ reset-names = "stmmaceth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mii0>;
+ clock-names = "stmmaceth";
+ clocks = <&CLK_S_GMAC0_PHY>;
+ };
+
+ ethernet1: dwmac@fef08000 {
+ device_type = "network";
+ compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+ status = "disabled";
+ reg = <0xfef08000 0x8000>, <0x7f0 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+ interrupts = <0 136 0>, <0 137 0>, <0 138 0>;
+ interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+
+ snps,pbl = <32>;
+ snps,mixed-burst;
+
+ st,syscon = <&syscfg_sbc>;
+
+ resets = <&softreset STIH416_ETH1_SOFTRESET>;
+ reset-names = "stmmaceth";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mii1>;
+ clock-names = "stmmaceth";
+ clocks = <&CLK_S_ETH1_PHY>;
+ };
+
+ rc: rc@fe518000 {
+ compatible = "st,comms-irb";
+ reg = <0xfe518000 0x234>;
+ interrupts = <0 203 0>;
+ rx-mode = "infrared";
+ clocks = <&CLK_SYSIN>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ir>;
+ resets = <&softreset STIH416_IRB_SOFTRESET>;
+ };
+
};
};
aliases {
ttyAS0 = &serial2;
+ ethernet0 = ðernet0;
+ ethernet1 = ðernet1;
};
soc {
status = "okay";
};
+
+ ethernet0: dwmac@fe810000 {
+ status = "okay";
+ phy-mode = "mii";
+ pinctrl-0 = <&pinctrl_mii0>;
+
+ snps,reset-gpio = <&PIO106 2>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 10000>;
+ };
+
+ ethernet1: dwmac@fef08000 {
+ status = "disabled";
+ phy-mode = "mii";
+ st,tx-retime-src = "txclk";
+
+ snps,reset-gpio = <&PIO4 7>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 10000>;
+ };
};
};
aliases {
ttyAS0 = &sbc_serial1;
+ ethernet1 = ðernet1;
};
soc {
sbc_serial1: serial@fe531000 {
i2c@fe541000 {
status = "okay";
};
+
+ ethernet1: dwmac@fef08000 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ max-speed = <1000>;
+ st,tx-retime-src = "clk_125";
+ snps,reset-gpio = <&PIO3 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 10000>;
+
+ pinctrl-0 = <&pinctrl_rgmii1>;
+ };
};
};
ranges;
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
};
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
ranges;
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <55>;
clocks = <&ahb_gates 17>;
};
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
ranges;
emac: ethernet@01c0b000 {
- compatible = "allwinner,sun4i-emac";
+ compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
interrupts = <0 55 4>;
clocks = <&ahb_gates 17>;
};
mdio@01c0b080 {
- compatible = "allwinner,sun4i-mdio";
+ compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
#address-cells = <1>;
void __iomem *base;
int irq;
const char *name = of_get_property(np, "compatible", NULL);
+ struct clk *clk;
base = of_iomap(np, 0);
if (WARN_ON(!base))
return;
+ clk = of_clk_get(np, 0);
+ if (WARN_ON(IS_ERR(clk)))
+ return;
/* Ensure timer is disabled */
writel(0, base + TIMER_CTRL);
goto err;
if (!init_count)
- sp804_clocksource_init(base, name);
+ __sp804_clocksource_and_sched_clock_init(base, name, clk, 0);
else {
irq = irq_of_parse_and_map(np, 0);
if (irq <= 0)
goto err;
- sp804_clockevents_init(base, irq, name);
+ __sp804_clockevents_init(base, irq, clk, name);
}
init_count++;
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
CONFIG_SOC_AM33XX=y
+CONFIG_SOC_DRA7XX=y
CONFIG_SOC_AM43XX=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_ARCH_SOCFPGA=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_STMMAC_ETH=y
+CONFIG_MICREL_PHY=y
# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT3_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_VFAT_FS=y
CONFIG_ENABLE_DEFAULT_TRACERS=y
CONFIG_DEBUG_USER=y
CONFIG_XZ_DEC=y
+CONFIG_MMC=y
+CONFIG_MMC_DW=y
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_GIC
- select CPU_V7
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- select GENERIC_TIME
select GPIO_BCM_KONA
- select SPARSE_IRQ
select TICK_ONESHOT
select CACHE_L2X0
select HAVE_ARM_ARCH_TIMER
select ARM_AMBA
select ARM_ERRATA_411920
select ARM_TIMER_SP804
- select CLKDEV_LOOKUP
- select CLKSRC_OF
- select CPU_V6
- select GENERIC_CLOCKEVENTS
select PINCTRL
select PINCTRL_BCM2835
help
config ARCH_BERLIN
bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
select ARM_GIC
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select COMMON_CLK
select DW_APB_ICTL
select DW_APB_TIMER_OF
select CACHE_L2X0
select CPU_PJ4B
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
config MACH_BERLIN_BG2CD
bool "Marvell Armada 1500-mini (BG2CD)"
select CACHE_L2X0
- select CPU_V7
select HAVE_ARM_TWD if SMP
endmenu
config ARCH_CNS3XXX
bool "Cavium Networks CNS3XXX family" if ARCH_MULTI_V6
select ARM_GIC
- select CPU_V6K
- select GENERIC_CLOCKEVENTS
- select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
help
#include <linux/time.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/mtd-davinci.h>
/* Timing value configuration */
WSTROBE(WSTROBE_MAX) | \
WSETUP(WSETUP_MAX))
+static inline unsigned int davinci_aemif_readl(void __iomem *base, int offset)
+{
+ return readl_relaxed(base + offset);
+}
+
+static inline void davinci_aemif_writel(void __iomem *base,
+ int offset, unsigned long value)
+{
+ writel_relaxed(value, base + offset);
+}
+
/*
* aemif_calc_rate - calculate timing data.
* @wanted: The cycle time needed in nanoseconds.
* @t: timing values to be progammed
* @base: The virtual base address of the AEMIF interface
* @cs: chip-select to program the timing values for
+ * @clkrate: the AEMIF clkrate
*
* This function programs the given timing values (in real clock) into the
* AEMIF registers taking the AEMIF clock into account.
*
* Returns 0 on success, else negative errno.
*/
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
- void __iomem *base, unsigned cs)
+static int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
+ void __iomem *base, unsigned cs,
+ unsigned long clkrate)
{
unsigned set, val;
int ta, rhold, rstrobe, rsetup, whold, wstrobe, wsetup;
unsigned offset = A1CR_OFFSET + cs * 4;
- struct clk *aemif_clk;
- unsigned long clkrate;
if (!t)
return 0; /* Nothing to do */
- aemif_clk = clk_get(NULL, "aemif");
- if (IS_ERR(aemif_clk))
- return PTR_ERR(aemif_clk);
-
- clkrate = clk_get_rate(aemif_clk);
-
clkrate /= 1000; /* turn clock into kHz for ease of use */
ta = aemif_calc_rate(t->ta, clkrate, TA_MAX);
return 0;
}
-EXPORT_SYMBOL(davinci_aemif_setup_timing);
+
+/**
+ * davinci_aemif_setup - setup AEMIF interface by davinci_nand_pdata
+ * @pdev - link to platform device to setup settings for
+ *
+ * This function does not use any locking while programming the AEMIF
+ * because it is expected that there is only one user of a given
+ * chip-select.
+ *
+ * Returns 0 on success, else negative errno.
+ */
+int davinci_aemif_setup(struct platform_device *pdev)
+{
+ struct davinci_nand_pdata *pdata = dev_get_platdata(&pdev->dev);
+ uint32_t val;
+ unsigned long clkrate;
+ struct resource *res;
+ void __iomem *base;
+ struct clk *clk;
+ int ret = 0;
+
+ clk = clk_get(&pdev->dev, "aemif");
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret < 0) {
+ dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
+ ret);
+ goto err_put;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "cannot get IORESOURCE_MEM\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ base = ioremap(res->start, resource_size(res));
+ if (!base) {
+ dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ /*
+ * Setup Async configuration register in case we did not boot
+ * from NAND and so bootloader did not bother to set it up.
+ */
+ val = davinci_aemif_readl(base, A1CR_OFFSET + pdev->id * 4);
+ /*
+ * Extended Wait is not valid and Select Strobe mode is not
+ * used
+ */
+ val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK);
+ if (pdata->options & NAND_BUSWIDTH_16)
+ val |= 0x1;
+
+ davinci_aemif_writel(base, A1CR_OFFSET + pdev->id * 4, val);
+
+ clkrate = clk_get_rate(clk);
+
+ if (pdata->timing)
+ ret = davinci_aemif_setup_timing(pdata->timing, base, pdev->id,
+ clkrate);
+
+ if (ret < 0)
+ dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
+
+ iounmap(base);
+err:
+ clk_disable_unprepare(clk);
+err_put:
+ clk_put(clk);
+ return ret;
+}
if (ret)
pr_warning("da830_evm_init: NAND device not registered.\n");
+ if (davinci_aemif_setup(&da830_evm_nand_device))
+ pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+
gpio_direction_output(mux_mode, 1);
}
#else
platform_add_devices(da850_evm_devices,
ARRAY_SIZE(da850_evm_devices));
+
+ if (davinci_aemif_setup(&da850_evm_nandflash_device))
+ pr_warn("%s: Cannot configure AEMIF.\n", __func__);
}
}
/* only one device will be jumpered and detected */
if (HAS_NAND) {
platform_device_register(&davinci_evm_nandflash_device);
+
+ if (davinci_aemif_setup(&davinci_evm_nandflash_device))
+ pr_warn("%s: Cannot configure AEMIF.\n",
+ __func__);
+
evm_leds[7].default_trigger = "nand-disk";
if (HAS_NOR)
pr_warning("WARNING: both NAND and NOR flash "
platform_device_register(&davinci_nand_device);
+ if (davinci_aemif_setup(&davinci_nand_device))
+ pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+
dm646x_init_edma(dm646x_edma_rsv);
if (HAS_ATA)
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
#include <mach/mux.h>
#include <linux/platform_data/spi-davinci.h>
{
platform_add_devices(mityomapl138_devices,
ARRAY_SIZE(mityomapl138_devices));
+
+ if (davinci_aemif_setup(&mityomapl138_nandflash_device))
+ pr_warn("%s: Cannot configure AEMIF.\n", __func__);
}
static const short mityomap_mii_pins[] = {
#define CPU_CTRL_PCIE1_LINK 0x00000008
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
+#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
select ARM_PSCI
select ARM_TIMER_SP804
select CACHE_L2X0
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select MAILBOX
select PL320_MBOX
- select SPARSE_IRQ
- select USE_OF
select ZONE_DMA if ARM_LPAE
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
- select ARCH_WANT_OPTIONAL_GPIOLIB
select CACHE_L2X0
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
- select HAVE_ARM_TWD
- select HAVE_SMP
+ select HAVE_ARM_TWD if SMP
select PINCTRL
select PINCTRL_SINGLE
help
bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
- select ARM_PATCH_PHYS_VIRT
select CLKSRC_MMIO
- select COMMON_CLK
select GENERIC_ALLOCATOR
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
- select MULTI_IRQ_HANDLER
select PINCTRL
select SOC_BUS
- select SPARSE_IRQ
- select USE_OF
help
Support for Freescale MXC/iMX-based family of processors
config SOC_IMX35
bool
select ARCH_MXC_IOMUX_V3
- select CPU_V6K
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
- select CPU_V7
select MXC_TZIC
config SOC_IMX51
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420
select ARM_GIC
- select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
select HAVE_IMX_SRC
- select HAVE_SMP
select MFD_SYSCON
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select ARM_GIC
- select CPU_V7
select HAVE_IMX_ANATOP
select HAVE_IMX_GPC
select HAVE_IMX_MMDC
config SOC_VF610
bool "Vybrid Family VF610 support"
- select CPU_V7
select ARM_GIC
- select CLKSRC_OF
select PINCTRL_VF610
select VF_PIT_TIMER
select PL310_ERRATA_588369 if CACHE_PL310
if (IS_ENABLED(CONFIG_PCI_IMX6))
clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
+ /* Set initial power mode */
+ imx6q_set_lpm(WAIT_CLOCKED);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
/* Audio-related clocks configuration */
clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]);
+ /* Set initial power mode */
+ imx6q_set_lpm(WAIT_CLOCKED);
+
np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
IMX6Q_GPR1_GINT);
- /* Set initial power mode */
- imx6q_set_lpm(WAIT_CLOCKED);
suspend_set_ops(&imx6q_pm_ops);
}
config INTEGRATOR_IMPD1
tristate "Include support for Integrator/IM-PD1"
depends on ARCH_INTEGRATOR_AP
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_VIC
+ select GPIO_PL061 if GPIOLIB
help
The IM-PD1 is an add-on logic module for the Integrator which
allows ARM(R) Ltd PrimeCells to be developed and evaluated.
#include <linux/io.h>
#include <linux/platform_data/clk-integrator.h>
#include <linux/slab.h>
+#include <linux/irqchip/arm-vic.h>
#include <mach/lm.h>
#include <mach/impd1.h>
struct impd1_module {
void __iomem *base;
+ void __iomem *vic_base;
};
void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
static struct impd1_device impd1_devs[] = {
{
- .offset = 0x03000000,
- .id = 0x00041190,
- }, {
.offset = 0x00100000,
.irq = { 1 },
.id = 0x00141011,
}
};
-static int impd1_probe(struct lm_device *dev)
+/*
+ * Valid IRQs: 0 thru 9 and 11, 10 unused.
+ */
+#define IMPD1_VALID_IRQS 0x00000bffU
+
+static int __init impd1_probe(struct lm_device *dev)
{
struct impd1_module *impd1;
- int i, ret;
+ int irq_base;
+ int i;
if (dev->id != module_id)
return -EINVAL;
- if (!request_mem_region(dev->resource.start, SZ_4K, "LM registers"))
+ if (!devm_request_mem_region(&dev->dev, dev->resource.start,
+ SZ_4K, "LM registers"))
return -EBUSY;
- impd1 = kzalloc(sizeof(struct impd1_module), GFP_KERNEL);
- if (!impd1) {
- ret = -ENOMEM;
- goto release_lm;
- }
+ impd1 = devm_kzalloc(&dev->dev, sizeof(struct impd1_module),
+ GFP_KERNEL);
+ if (!impd1)
+ return -ENOMEM;
- impd1->base = ioremap(dev->resource.start, SZ_4K);
- if (!impd1->base) {
- ret = -ENOMEM;
- goto free_impd1;
- }
+ impd1->base = devm_ioremap(&dev->dev, dev->resource.start, SZ_4K);
+ if (!impd1->base)
+ return -ENOMEM;
- lm_set_drvdata(dev, impd1);
+ integrator_impd1_clk_init(impd1->base, dev->id);
- printk("IM-PD1 found at 0x%08lx\n",
- (unsigned long)dev->resource.start);
+ if (!devm_request_mem_region(&dev->dev,
+ dev->resource.start + 0x03000000,
+ SZ_4K, "VIC"))
+ return -EBUSY;
- integrator_impd1_clk_init(impd1->base, dev->id);
+ impd1->vic_base = devm_ioremap(&dev->dev,
+ dev->resource.start + 0x03000000,
+ SZ_4K);
+ if (!impd1->vic_base)
+ return -ENOMEM;
+
+ irq_base = vic_init_cascaded(impd1->vic_base, dev->irq,
+ IMPD1_VALID_IRQS, 0);
+
+ lm_set_drvdata(dev, impd1);
+
+ dev_info(&dev->dev, "IM-PD1 found at 0x%08lx\n",
+ (unsigned long)dev->resource.start);
for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
struct impd1_device *idev = impd1_devs + i;
struct amba_device *d;
unsigned long pc_base;
char devname[32];
+ int irq1 = idev->irq[0];
+ int irq2 = idev->irq[1];
+
+ /* Translate IRQs to IM-PD1 local numberspace */
+ if (irq1)
+ irq1 += irq_base;
+ if (irq2)
+ irq2 += irq_base;
pc_base = dev->resource.start + idev->offset;
snprintf(devname, 32, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
d = amba_ahb_device_add_res(&dev->dev, devname, pc_base, SZ_4K,
- dev->irq, dev->irq,
+ irq1, irq2,
idev->platform_data, idev->id,
&dev->resource);
if (IS_ERR(d)) {
}
return 0;
-
- free_impd1:
- if (impd1 && impd1->base)
- iounmap(impd1->base);
- kfree(impd1);
- release_lm:
- release_mem_region(dev->resource.start, SZ_4K);
- return ret;
}
static int impd1_remove_one(struct device *dev, void *data)
static void impd1_remove(struct lm_device *dev)
{
- struct impd1_module *impd1 = lm_get_drvdata(dev);
-
device_for_each_child(&dev->dev, NULL, impd1_remove_one);
integrator_impd1_clk_exit(dev->id);
lm_set_drvdata(dev, NULL);
-
- iounmap(impd1->base);
- kfree(impd1);
- release_mem_region(dev->resource.start, SZ_4K);
}
static struct lm_driver impd1_driver = {
#include <linux/sys_soc.h>
#include <linux/termios.h>
#include <linux/sched_clock.h>
+#include <linux/clk-provider.h>
#include <mach/hardware.h>
#include <mach/platform.h>
struct clk *clk;
unsigned long rate;
- clk = clk_get_sys("ap_timer", NULL);
- BUG_ON(IS_ERR(clk));
- clk_prepare_enable(clk);
- rate = clk_get_rate(clk);
+ of_clk_init(NULL);
err = of_property_read_string(of_aliases,
"arm,timer-primary", &path);
base = of_iomap(node, 0);
if (WARN_ON(!base))
return;
+
+ clk = of_clk_get(node, 0);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+
writel(0, base + TIMER_CTRL);
integrator_clocksource_init(rate, base);
if (WARN_ON(!base))
return;
irq = irq_of_parse_and_map(node, 0);
+
+ clk = of_clk_get(node, 0);
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+
writel(0, base + TIMER_CTRL);
integrator_clockevent_init(rate, base, irq);
}
{
cm_init();
of_irq_init(fpga_irq_of_match);
- integrator_clk_init(false);
}
/* For the Device Tree, add in the UART callbacks as AUXDATA */
#include <linux/irqchip/versatile-fpga.h>
#include <linux/gfp.h>
#include <linux/mtd/physmap.h>
-#include <linux/platform_data/clk-integrator.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <mach/platform.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/icst.h>
#include <mach/lm.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/hardware/timer-sp.h>
-
#include <plat/clcd.h>
#include <plat/sched_clock.h>
{
cm_init();
of_irq_init(fpga_irq_of_match);
- integrator_clk_init(true);
}
/*
config ARCH_KEYSTONE
bool "Texas Instruments Keystone Devices"
depends on ARCH_MULTI_V7
- select CPU_V7
select ARM_GIC
select HAVE_ARM_ARCH_TIMER
- select HAVE_SMP
select CLKSRC_MMIO
- select GENERIC_CLOCKEVENTS
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_ERRATA_798181 if SMP
select COMMON_CLK_KEYSTONE
select ARCH_SUPPORTS_BIG_ENDIAN
#define CPU_RESET 0x00000002
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
+#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
bool "MOXA ART SoC" if ARCH_MULTI_V4T
select CPU_FA526
select ARM_DMA_MEM_BUFFERABLE
- select DMA_OF
- select USE_OF
- select CLKSRC_OF
select CLKSRC_MMIO
- select HAVE_CLK
- select COMMON_CLK
select GENERIC_IRQ_CHIP
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_CLOCKEVENTS
select PHYLIB if NETDEVICES
help
Say Y here if you want to run your kernel on hardware with a
-config ARCH_MSM
- bool
-
-config ARCH_MSM_DT
- bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7
- select ARCH_MSM
- select ARCH_REQUIRE_GPIOLIB
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- help
- Support for Qualcomm's devicetree based MSM systems.
-
if ARCH_MSM
-menu "Qualcomm MSM SoC Selection"
- depends on ARCH_MSM_DT
-
-config ARCH_MSM8X60
- bool "Enable support for MSM8X60"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MSM_SCM if SMP
- select MSM_TIMER
-
-config ARCH_MSM8960
- bool "Enable support for MSM8960"
- select ARM_GIC
- select CPU_V7
- select HAVE_SMP
- select MSM_SCM if SMP
- select MSM_TIMER
-
-config ARCH_MSM8974
- bool "Enable support for MSM8974"
- select ARM_GIC
- select CPU_V7
- select HAVE_ARM_ARCH_TIMER
- select HAVE_SMP
- select MSM_SCM if SMP
-
-endmenu
-
choice
prompt "Qualcomm MSM SoC Type"
default ARCH_MSM7X00A
- depends on ARCH_MSM_NODT
+ depends on ARCH_MSM
config ARCH_MSM7X00A
bool "MSM7x00A / MSM7x01A"
select MACH_TROUT if !MACH_HALIBUT
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_SMD_PKG3
config ARCH_MSM7X30
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_VIC
config ARCH_QSD8X50
select MSM_GPIOMUX
select MSM_PROC_COMM
select MSM_SMD
- select MSM_TIMER
+ select CLKSRC_QCOM
select MSM_VIC
endchoice
bool
menu "Qualcomm MSM Board Type"
- depends on ARCH_MSM_NODT
+ depends on ARCH_MSM
config MACH_HALIBUT
depends on ARCH_MSM
config MSM_SCM
bool
-config MSM_TIMER
- bool
-
endif
-obj-$(CONFIG_MSM_TIMER) += timer.o
obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_MSM_VIC) += irq-vic.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
-obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
-
-CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
-
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
-obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
+++ /dev/null
-/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/of.h>
-#include <linux/of_platform.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static const char * const msm_dt_match[] __initconst = {
- "qcom,msm8660-fluid",
- "qcom,msm8660-surf",
- "qcom,msm8960-cdp",
- NULL
-};
-
-static const char * const apq8074_dt_match[] __initconst = {
- "qcom,apq8074-dragonboard",
- NULL
-};
-
-DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
- .smp = smp_ops(msm_smp_ops),
- .dt_compat = msm_dt_match,
-MACHINE_END
-
-DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
- .dt_compat = apq8074_dt_match,
-MACHINE_END
unsigned int mtype, void *caller);
extern struct smp_operations msm_smp_ops;
-extern void msm_cpu_die(unsigned int cpu);
struct msm_mmc_platform_data;
+++ /dev/null
-/*
- * linux/arch/arm/mach-realview/headsmp.S
- *
- * Copyright (c) 2003 ARM Limited
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-/*
- * MSM specific entry point for secondary CPUs. This provides
- * a "holding pen" into which all secondary cores are held until we're
- * ready for them to initialise.
- */
-ENTRY(msm_secondary_startup)
- mrc p15, 0, r0, c0, c0, 5
- and r0, r0, #15
- adr r4, 1f
- ldmia r4, {r5, r6}
- sub r4, r4, r5
- add r6, r6, r4
-pen: ldr r7, [r6]
- cmp r7, r0
- bne pen
-
- /*
- * we've been released from the holding pen: secondary_stack
- * should now contain the SVC stack for this core
- */
- b secondary_startup
-ENDPROC(msm_secondary_startup)
-
- .align
-1: .long .
- .long pen_release
+++ /dev/null
-/*
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/smp_plat.h>
-
-#include "common.h"
-
-static inline void cpu_enter_lowpower(void)
-{
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-}
-
-static inline void platform_do_lowpower(unsigned int cpu)
-{
- /* Just enter wfi for now. TODO: Properly shut off the cpu. */
- for (;;) {
- /*
- * here's the WFI
- */
- asm("wfi"
- :
- :
- : "memory", "cc");
-
- if (pen_release == cpu_logical_map(cpu)) {
- /*
- * OK, proper wakeup, we're done
- */
- break;
- }
-
- /*
- * getting here, means that we have come out of WFI without
- * having been woken up - this shouldn't happen
- *
- * The trouble is, letting people know about this is not really
- * possible, since we are currently running incoherently, and
- * therefore cannot safely call printk() or anything else
- */
- pr_debug("CPU%u: spurious wakeup call\n", cpu);
- }
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void __ref msm_cpu_die(unsigned int cpu)
-{
- /*
- * we're ready for shutdown now, so do it
- */
- cpu_enter_lowpower();
- platform_do_lowpower(cpu);
-
- /*
- * bring this CPU back into the world of cache
- * coherency, and then restore interrupts
- */
- cpu_leave_lowpower();
-}
+++ /dev/null
-/*
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/mach-types.h>
-#include <asm/smp_plat.h>
-
-#include "scm-boot.h"
-#include "common.h"
-
-#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
-#define SCSS_CPU1CORE_RESET 0xD80
-#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-
-extern void msm_secondary_startup(void);
-
-static DEFINE_SPINLOCK(boot_lock);
-
-static inline int get_core_count(void)
-{
- /* 1 + the PART[1:0] field of MIDR */
- return ((read_cpuid_id() >> 4) & 3) + 1;
-}
-
-static void msm_secondary_init(unsigned int cpu)
-{
- /*
- * let the primary processor know we're out of the
- * pen, then head off into the C entry point
- */
- pen_release = -1;
- smp_wmb();
-
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
-}
-
-static void prepare_cold_cpu(unsigned int cpu)
-{
- int ret;
- ret = scm_set_boot_addr(virt_to_phys(msm_secondary_startup),
- SCM_FLAG_COLDBOOT_CPU1);
- if (ret == 0) {
- void __iomem *sc1_base_ptr;
- sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
- if (sc1_base_ptr) {
- writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
- writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
- writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
- iounmap(sc1_base_ptr);
- }
- } else
- printk(KERN_DEBUG "Failed to set secondary core boot "
- "address\n");
-}
-
-static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
- unsigned long timeout;
- static int cold_boot_done;
-
- /* Only need to bring cpu out of reset this way once */
- if (cold_boot_done == false) {
- prepare_cold_cpu(cpu);
- cold_boot_done = true;
- }
-
- /*
- * set synchronisation state between this boot processor
- * and the secondary one
- */
- spin_lock(&boot_lock);
-
- /*
- * The secondary processor is waiting to be released from
- * the holding pen - release it, then wait for it to flag
- * that it has been released by resetting pen_release.
- *
- * Note that "pen_release" is the hardware CPU ID, whereas
- * "cpu" is Linux's internal ID.
- */
- pen_release = cpu_logical_map(cpu);
- sync_cache_w(&pen_release);
-
- /*
- * Send the secondary CPU a soft interrupt, thereby causing
- * the boot monitor to read the system wide flags register,
- * and branch to the address found there.
- */
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
- timeout = jiffies + (1 * HZ);
- while (time_before(jiffies, timeout)) {
- smp_rmb();
- if (pen_release == -1)
- break;
-
- udelay(10);
- }
-
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return pen_release != -1 ? -ENOSYS : 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system. The msm8x60
- * does not support the ARM SCU, so just set the possible cpu mask to
- * NR_CPUS.
- */
-static void __init msm_smp_init_cpus(void)
-{
- unsigned int i, ncores = get_core_count();
-
- if (ncores > nr_cpu_ids) {
- pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
- ncores, nr_cpu_ids);
- ncores = nr_cpu_ids;
- }
-
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
-}
-
-static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
-{
-}
-
-struct smp_operations msm_smp_ops __initdata = {
- .smp_init_cpus = msm_smp_init_cpus,
- .smp_prepare_cpus = msm_smp_prepare_cpus,
- .smp_secondary_init = msm_secondary_init,
- .smp_boot_secondary = msm_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
- .cpu_die = msm_cpu_die,
-#endif
-};
+++ /dev/null
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include "scm.h"
-#include "scm-boot.h"
-
-/*
- * Set the cold/warm boot address for one of the CPU cores.
- */
-int scm_set_boot_addr(phys_addr_t addr, int flags)
-{
- struct {
- unsigned int flags;
- phys_addr_t addr;
- } cmd;
-
- cmd.addr = addr;
- cmd.flags = flags;
- return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
- &cmd, sizeof(cmd), NULL, 0);
-}
-EXPORT_SYMBOL(scm_set_boot_addr);
+++ /dev/null
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_BOOT_H
-#define __MACH_SCM_BOOT_H
-
-#define SCM_BOOT_ADDR 0x1
-#define SCM_FLAG_COLDBOOT_CPU1 0x1
-#define SCM_FLAG_WARMBOOT_CPU1 0x2
-#define SCM_FLAG_WARMBOOT_CPU0 0x4
-
-int scm_set_boot_addr(phys_addr_t addr, int flags);
-
-#endif
+++ /dev/null
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-
-#include <asm/cacheflush.h>
-
-#include "scm.h"
-
-/* Cache line size for msm8x60 */
-#define CACHELINESIZE 32
-
-#define SCM_ENOMEM -5
-#define SCM_EOPNOTSUPP -4
-#define SCM_EINVAL_ADDR -3
-#define SCM_EINVAL_ARG -2
-#define SCM_ERROR -1
-#define SCM_INTERRUPTED 1
-
-static DEFINE_MUTEX(scm_lock);
-
-/**
- * struct scm_command - one SCM command buffer
- * @len: total available memory for command and response
- * @buf_offset: start of command buffer
- * @resp_hdr_offset: start of response buffer
- * @id: command to be executed
- * @buf: buffer returned from scm_get_command_buffer()
- *
- * An SCM command is laid out in memory as follows:
- *
- * ------------------- <--- struct scm_command
- * | command header |
- * ------------------- <--- scm_get_command_buffer()
- * | command buffer |
- * ------------------- <--- struct scm_response and
- * | response header | scm_command_to_response()
- * ------------------- <--- scm_get_response_buffer()
- * | response buffer |
- * -------------------
- *
- * There can be arbitrary padding between the headers and buffers so
- * you should always use the appropriate scm_get_*_buffer() routines
- * to access the buffers in a safe manner.
- */
-struct scm_command {
- u32 len;
- u32 buf_offset;
- u32 resp_hdr_offset;
- u32 id;
- u32 buf[0];
-};
-
-/**
- * struct scm_response - one SCM response buffer
- * @len: total available memory for response
- * @buf_offset: start of response data relative to start of scm_response
- * @is_complete: indicates if the command has finished processing
- */
-struct scm_response {
- u32 len;
- u32 buf_offset;
- u32 is_complete;
-};
-
-/**
- * alloc_scm_command() - Allocate an SCM command
- * @cmd_size: size of the command buffer
- * @resp_size: size of the response buffer
- *
- * Allocate an SCM command, including enough room for the command
- * and response headers as well as the command and response buffers.
- *
- * Returns a valid &scm_command on success or %NULL if the allocation fails.
- */
-static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
-{
- struct scm_command *cmd;
- size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
- resp_size;
-
- cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
- if (cmd) {
- cmd->len = len;
- cmd->buf_offset = offsetof(struct scm_command, buf);
- cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
- }
- return cmd;
-}
-
-/**
- * free_scm_command() - Free an SCM command
- * @cmd: command to free
- *
- * Free an SCM command.
- */
-static inline void free_scm_command(struct scm_command *cmd)
-{
- kfree(cmd);
-}
-
-/**
- * scm_command_to_response() - Get a pointer to a scm_response
- * @cmd: command
- *
- * Returns a pointer to a response for a command.
- */
-static inline struct scm_response *scm_command_to_response(
- const struct scm_command *cmd)
-{
- return (void *)cmd + cmd->resp_hdr_offset;
-}
-
-/**
- * scm_get_command_buffer() - Get a pointer to a command buffer
- * @cmd: command
- *
- * Returns a pointer to the command buffer of a command.
- */
-static inline void *scm_get_command_buffer(const struct scm_command *cmd)
-{
- return (void *)cmd->buf;
-}
-
-/**
- * scm_get_response_buffer() - Get a pointer to a response buffer
- * @rsp: response
- *
- * Returns a pointer to a response buffer of a response.
- */
-static inline void *scm_get_response_buffer(const struct scm_response *rsp)
-{
- return (void *)rsp + rsp->buf_offset;
-}
-
-static int scm_remap_error(int err)
-{
- switch (err) {
- case SCM_ERROR:
- return -EIO;
- case SCM_EINVAL_ADDR:
- case SCM_EINVAL_ARG:
- return -EINVAL;
- case SCM_EOPNOTSUPP:
- return -EOPNOTSUPP;
- case SCM_ENOMEM:
- return -ENOMEM;
- }
- return -EINVAL;
-}
-
-static u32 smc(u32 cmd_addr)
-{
- int context_id;
- register u32 r0 asm("r0") = 1;
- register u32 r1 asm("r1") = (u32)&context_id;
- register u32 r2 asm("r2") = cmd_addr;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r0")
- __asmeq("%2", "r1")
- __asmeq("%3", "r2")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0)
- : "r" (r0), "r" (r1), "r" (r2)
- : "r3");
- } while (r0 == SCM_INTERRUPTED);
-
- return r0;
-}
-
-static int __scm_call(const struct scm_command *cmd)
-{
- int ret;
- u32 cmd_addr = virt_to_phys(cmd);
-
- /*
- * Flush the entire cache here so callers don't have to remember
- * to flush the cache when passing physical addresses to the secure
- * side in the buffer.
- */
- flush_cache_all();
- ret = smc(cmd_addr);
- if (ret < 0)
- ret = scm_remap_error(ret);
-
- return ret;
-}
-
-/**
- * scm_call() - Send an SCM command
- * @svc_id: service identifier
- * @cmd_id: command identifier
- * @cmd_buf: command buffer
- * @cmd_len: length of the command buffer
- * @resp_buf: response buffer
- * @resp_len: length of the response buffer
- *
- * Sends a command to the SCM and waits for the command to finish processing.
- */
-int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
- void *resp_buf, size_t resp_len)
-{
- int ret;
- struct scm_command *cmd;
- struct scm_response *rsp;
-
- cmd = alloc_scm_command(cmd_len, resp_len);
- if (!cmd)
- return -ENOMEM;
-
- cmd->id = (svc_id << 10) | cmd_id;
- if (cmd_buf)
- memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
-
- mutex_lock(&scm_lock);
- ret = __scm_call(cmd);
- mutex_unlock(&scm_lock);
- if (ret)
- goto out;
-
- rsp = scm_command_to_response(cmd);
- do {
- u32 start = (u32)rsp;
- u32 end = (u32)scm_get_response_buffer(rsp) + resp_len;
- start &= ~(CACHELINESIZE - 1);
- while (start < end) {
- asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
- : "memory");
- start += CACHELINESIZE;
- }
- } while (!rsp->is_complete);
-
- if (resp_buf)
- memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
-out:
- free_scm_command(cmd);
- return ret;
-}
-EXPORT_SYMBOL(scm_call);
-
-u32 scm_get_version(void)
-{
- int context_id;
- static u32 version = -1;
- register u32 r0 asm("r0");
- register u32 r1 asm("r1");
-
- if (version != -1)
- return version;
-
- mutex_lock(&scm_lock);
-
- r0 = 0x1 << 8;
- r1 = (u32)&context_id;
- do {
- asm volatile(
- __asmeq("%0", "r0")
- __asmeq("%1", "r1")
- __asmeq("%2", "r0")
- __asmeq("%3", "r1")
-#ifdef REQUIRES_SEC
- ".arch_extension sec\n"
-#endif
- "smc #0 @ switch to secure world\n"
- : "=r" (r0), "=r" (r1)
- : "r" (r0), "r" (r1)
- : "r2", "r3");
- } while (r0 == SCM_INTERRUPTED);
-
- version = r1;
- mutex_unlock(&scm_lock);
-
- return version;
-}
-EXPORT_SYMBOL(scm_get_version);
+++ /dev/null
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_SCM_H
-#define __MACH_SCM_H
-
-#define SCM_SVC_BOOT 0x1
-#define SCM_SVC_PIL 0x2
-
-extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
- void *resp_buf, size_t resp_len);
-
-#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
-
-extern u32 scm_get_version(void);
-
-#endif
+++ /dev/null
-/*
- *
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2012, The Linux Foundation. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/cpu.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-#include <asm/mach/time.h>
-
-#include "common.h"
-
-#define TIMER_MATCH_VAL 0x0000
-#define TIMER_COUNT_VAL 0x0004
-#define TIMER_ENABLE 0x0008
-#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1)
-#define TIMER_ENABLE_EN BIT(0)
-#define TIMER_CLEAR 0x000C
-#define DGT_CLK_CTL 0x10
-#define DGT_CLK_CTL_DIV_4 0x3
-#define TIMER_STS_GPT0_CLR_PEND BIT(10)
-
-#define GPT_HZ 32768
-
-#define MSM_DGT_SHIFT 5
-
-static void __iomem *event_base;
-static void __iomem *sts_base;
-
-static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
- /* Stop the timer tick */
- if (evt->mode == CLOCK_EVT_MODE_ONESHOT) {
- u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
- ctrl &= ~TIMER_ENABLE_EN;
- writel_relaxed(ctrl, event_base + TIMER_ENABLE);
- }
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static int msm_timer_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-{
- u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
-
- ctrl &= ~TIMER_ENABLE_EN;
- writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-
- writel_relaxed(ctrl, event_base + TIMER_CLEAR);
- writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
-
- if (sts_base)
- while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND)
- cpu_relax();
-
- writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
- return 0;
-}
-
-static void msm_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- u32 ctrl;
-
- ctrl = readl_relaxed(event_base + TIMER_ENABLE);
- ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN);
-
- switch (mode) {
- case CLOCK_EVT_MODE_RESUME:
- case CLOCK_EVT_MODE_PERIODIC:
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* Timer is enabled in set_next_event */
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- break;
- }
- writel_relaxed(ctrl, event_base + TIMER_ENABLE);
-}
-
-static struct clock_event_device __percpu *msm_evt;
-
-static void __iomem *source_base;
-
-static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
-{
- return readl_relaxed(source_base + TIMER_COUNT_VAL);
-}
-
-static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
-{
- /*
- * Shift timer count down by a constant due to unreliable lower bits
- * on some targets.
- */
- return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
-}
-
-static struct clocksource msm_clocksource = {
- .name = "dg_timer",
- .rating = 300,
- .read = msm_read_timer_count,
- .mask = CLOCKSOURCE_MASK(32),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int msm_timer_irq;
-static int msm_timer_has_ppi;
-
-static int msm_local_timer_setup(struct clock_event_device *evt)
-{
- int cpu = smp_processor_id();
- int err;
-
- evt->irq = msm_timer_irq;
- evt->name = "msm_timer";
- evt->features = CLOCK_EVT_FEAT_ONESHOT;
- evt->rating = 200;
- evt->set_mode = msm_timer_set_mode;
- evt->set_next_event = msm_timer_set_next_event;
- evt->cpumask = cpumask_of(cpu);
-
- clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff);
-
- if (msm_timer_has_ppi) {
- enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
- } else {
- err = request_irq(evt->irq, msm_timer_interrupt,
- IRQF_TIMER | IRQF_NOBALANCING |
- IRQF_TRIGGER_RISING, "gp_timer", evt);
- if (err)
- pr_err("request_irq failed\n");
- }
-
- return 0;
-}
-
-static void msm_local_timer_stop(struct clock_event_device *evt)
-{
- evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
- disable_percpu_irq(evt->irq);
-}
-
-static int msm_timer_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu)
-{
- /*
- * Grab cpu pointer in each case to avoid spurious
- * preemptible warnings
- */
- switch (action & ~CPU_TASKS_FROZEN) {
- case CPU_STARTING:
- msm_local_timer_setup(this_cpu_ptr(msm_evt));
- break;
- case CPU_DYING:
- msm_local_timer_stop(this_cpu_ptr(msm_evt));
- break;
- }
-
- return NOTIFY_OK;
-}
-
-static struct notifier_block msm_timer_cpu_nb = {
- .notifier_call = msm_timer_cpu_notify,
-};
-
-static u64 notrace msm_sched_clock_read(void)
-{
- return msm_clocksource.read(&msm_clocksource);
-}
-
-static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
- bool percpu)
-{
- struct clocksource *cs = &msm_clocksource;
- int res = 0;
-
- msm_timer_irq = irq;
- msm_timer_has_ppi = percpu;
-
- msm_evt = alloc_percpu(struct clock_event_device);
- if (!msm_evt) {
- pr_err("memory allocation failed for clockevents\n");
- goto err;
- }
-
- if (percpu)
- res = request_percpu_irq(irq, msm_timer_interrupt,
- "gp_timer", msm_evt);
-
- if (res) {
- pr_err("request_percpu_irq failed\n");
- } else {
- res = register_cpu_notifier(&msm_timer_cpu_nb);
- if (res) {
- free_percpu_irq(irq, msm_evt);
- goto err;
- }
-
- /* Immediately configure the timer on the boot CPU */
- msm_local_timer_setup(__this_cpu_ptr(msm_evt));
- }
-
-err:
- writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
- res = clocksource_register_hz(cs, dgt_hz);
- if (res)
- pr_err("clocksource_register failed\n");
- sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
-}
-
-#ifdef CONFIG_OF
-static void __init msm_dt_timer_init(struct device_node *np)
-{
- u32 freq;
- int irq;
- struct resource res;
- u32 percpu_offset;
- void __iomem *base;
- void __iomem *cpu0_base;
-
- base = of_iomap(np, 0);
- if (!base) {
- pr_err("Failed to map event base\n");
- return;
- }
-
- /* We use GPT0 for the clockevent */
- irq = irq_of_parse_and_map(np, 1);
- if (irq <= 0) {
- pr_err("Can't get irq\n");
- return;
- }
-
- /* We use CPU0's DGT for the clocksource */
- if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
- percpu_offset = 0;
-
- if (of_address_to_resource(np, 0, &res)) {
- pr_err("Failed to parse DGT resource\n");
- return;
- }
-
- cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res));
- if (!cpu0_base) {
- pr_err("Failed to map source base\n");
- return;
- }
-
- if (of_property_read_u32(np, "clock-frequency", &freq)) {
- pr_err("Unknown frequency\n");
- return;
- }
-
- event_base = base + 0x4;
- sts_base = base + 0x88;
- source_base = cpu0_base + 0x24;
- freq /= 4;
- writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL);
-
- msm_timer_init(freq, 32, irq, !!percpu_offset);
-}
-CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
-CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
-#endif
-
-static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
- u32 sts)
-{
- void __iomem *base;
-
- base = ioremap(addr, SZ_256);
- if (!base) {
- pr_err("Failed to map timer base\n");
- return -ENOMEM;
- }
- event_base = base + event;
- source_base = base + source;
- if (sts)
- sts_base = base + sts;
-
- return 0;
-}
-
-void __init msm7x01_timer_init(void)
-{
- struct clocksource *cs = &msm_clocksource;
-
- if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0))
- return;
- cs->read = msm_read_timer_count_shift;
- cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
- /* 600 KHz */
- msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
- false);
-}
-
-void __init msm7x30_timer_init(void)
-{
- if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80))
- return;
- msm_timer_init(24576000 / 4, 32, 1, false);
-}
-
-void __init qsd8x50_timer_init(void)
-{
- if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34))
- return;
- msm_timer_init(19200000 / 4, 32, 7, false);
-}
#define L2_WRITETHROUGH 0x00020000
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108)
+#define RSTOUTn_MASK_PHYS (BRIDGE_PHYS_BASE + 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c)
bool "Marvell SOCs with Device Tree support" if ARCH_MULTI_V7
select ARCH_SUPPORTS_BIG_ENDIAN
select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select IRQ_DOMAIN
- select MULTI_IRQ_HANDLER
select PINCTRL
select PLAT_ORION
- select SPARSE_IRQ
- select CLKDEV_LOOKUP
select MVEBU_MBUS
select ZONE_DMA if ARM_LPAE
select ARCH_REQUIRE_GPIOLIB
config MACH_ARMADA_370_XP
bool
select ARMADA_370_XP_TIMER
- select HAVE_SMP
select CACHE_L2X0
select CPU_PJ4B
bool "Freescale MXS (i.MX23, i.MX28) support"
depends on ARCH_MULTI_V5
select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK_PREPARE
select PINCTRL
select SOC_BUS
select SOC_IMX23
select ARM_VIC
select CLKSRC_NOMADIK_MTU
select CLKSRC_NOMADIK_MTU_SCHED_CLOCK
- select CLKSRC_OF
- select COMMON_CLK
select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_NOMADIK
select PINCTRL_STN8815
- select SPARSE_IRQ
- select USE_OF
help
Support for the Nomadik platform by ST-Ericsson
depends on ARCH_MULTI_V4_V5
depends on MMU
select CPU_ARM926T
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select SPARSE_IRQ
select ARM_AMBA
select ARM_VIC
select ARM_TIMER_SP804
- select USE_OF
- select CLKSRC_OF
help
This enables support for systems using the TI-NSPIRE CPU
depends on ARCH_MULTI_V6
select ARCH_OMAP2PLUS
select CPU_V6
- select MULTI_IRQ_HANDLER
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
select ARCH_OMAP2PLUS
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
- select CPU_V7
- select MULTI_IRQ_HANDLER
select OMAP_INTERCONNECT
select PM_OPP if PM
select PM_RUNTIME if CPU_IDLE
select ARM_ERRATA_720789
select ARM_GIC
select CACHE_L2X0
- select CPU_V7
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select OMAP_INTERCONNECT
select PL310_ERRATA_588369
select PL310_ERRATA_727915
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select ARM_GIC
- select CPU_V7
select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if LOCAL_TIMERS
- select HAVE_SMP
+ select HAVE_ARM_TWD if SMP
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
- select CPU_V7
- select MULTI_IRQ_HANDLER
config SOC_AM43XX
bool "TI AM43x"
depends on ARCH_MULTI_V7
- select CPU_V7
select ARCH_OMAP2PLUS
- select MULTI_IRQ_HANDLER
select ARM_GIC
select MACH_OMAP_GENERIC
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
select ARM_GIC
- select CPU_V7
- select HAVE_SMP
select HAVE_ARM_ARCH_TIMER
+ select IRQ_CROSSBAR
config ARCH_OMAP2PLUS
bool
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select MACH_OMAP_GENERIC
select OMAP_DM_TIMER
select PINCTRL
select PROC_DEVICETREE if PROC_FS
select SOC_BUS
- select SPARSE_IRQ
select TI_PRIV_EDMA
- select USE_OF
help
Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
unsigned long flags;
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
- _wakeupgen_clear(d->irq, irq_target_cpu[d->irq]);
+ _wakeupgen_clear(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
unsigned long flags;
raw_spin_lock_irqsave(&wakeupgen_lock, flags);
- _wakeupgen_set(d->irq, irq_target_cpu[d->irq]);
+ _wakeupgen_set(d->hwirq, irq_target_cpu[d->hwirq]);
raw_spin_unlock_irqrestore(&wakeupgen_lock, flags);
}
#include <linux/of_platform.h>
#include <linux/export.h>
#include <linux/irqchip/arm-gic.h>
+#include <linux/irqchip/irq-crossbar.h>
#include <linux/of_address.h>
#include <linux/reboot.h>
skip_errata_init:
omap_wakeupgen_init();
+#ifdef CONFIG_IRQ_CROSSBAR
+ irqcrossbar_init();
+#endif
irqchip_init();
}
#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE + 0x104)
#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE + 0x108)
+#define RSTOUTn_MASK_PHYS (ORION5X_BRIDGE_PHYS_BASE + 0x108)
#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE + 0x10c)
config ARCH_PICOXCELL
bool "Picochip PicoXcell" if ARCH_MULTI_V6
select ARCH_REQUIRE_GPIOLIB
- select ARM_PATCH_PHYS_VIRT
select ARM_VIC
- select CPU_V6K
select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
select HAVE_TCM
select NO_IOPORT
- select SPARSE_IRQ
- select USE_OF
config ARCH_SIRF
bool "CSR SiRF" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select PINCTRL
select PINCTRL_SIRF
config ARCH_ATLAS6
bool "CSR SiRFSoC ATLAS6 ARM Cortex A9 Platform"
default y
- select CPU_V7
select SIRF_IRQ
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
config ARCH_PRIMA2
bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
default y
- select CPU_V7
select SIRF_IRQ
select ZONE_DMA
help
bool "CSR SiRFSoC MARCO ARM Cortex A9 Platform"
default y
select ARM_GIC
- select CPU_V7
select HAVE_ARM_SCU if SMP
- select HAVE_SMP
select SMP_ON_UP if SMP
help
Support for CSR SiRFSoC ARM Cortex A9 Platform
#include <mach/gumstix.h>
#include <mach/mfp-pxa25x.h>
+#include <mach/irqs.h>
#include <linux/platform_data/video-pxafb.h>
#include "generic.h"
#ifndef ASM_ARCH_BALLOON3_H
#define ASM_ARCH_BALLOON3_H
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
enum balloon3_features {
BALLOON3_FEATURE_OHCI,
BALLOON3_FEATURE_MMC,
#ifndef __ASM_ARCH_CORGI_H
#define __ASM_ARCH_CORGI_H 1
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
/*
* Corgi (Non Standard) GPIO Definitions
#ifndef CSB726_H
#define CSB726_H
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
#define CSB726_GPIO_IRQ_LAN 52
#define CSB726_GPIO_IRQ_SM501 53
#define CSB726_GPIO_MMC_DETECT 100
* published by the Free Software Foundation.
*/
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
/* BTRESET - Reset line to Bluetooth module, active low signal. */
#define GPIO_GUMSTIX_BTRESET 7
* IDP hardware.
*/
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
#define IDP_FLASH_PHYS (PXA_CS0_PHYS)
#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS)
#ifndef _INCLUDE_PALMLD_H_
#define _INCLUDE_PALMLD_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
#ifndef _INCLUDE_PALMT5_H_
#define _INCLUDE_PALMT5_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
#ifndef _INCLUDE_PALMTC_H_
#define _INCLUDE_PALMTC_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
#ifndef _INCLUDE_PALMTX_H_
#define _INCLUDE_PALMTX_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/** HERE ARE GPIOs **/
/* GPIOs */
* Definitions of CPU card resources only
*/
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/* phyCORE-PXA270 (PCM027) Interrupts */
#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
#define PCM027_BTDET_IRQ PCM027_IRQ(0)
*/
#include <mach/pcm027.h>
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
/*
* definitions relevant only when the PCM-990
#ifndef __ASM_ARCH_POODLE_H
#define __ASM_ARCH_POODLE_H 1
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/*
* GPIOs
*/
#define __ASM_ARCH_SPITZ_H 1
#endif
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO, PXA_GPIO_TO_IRQ */
#include <linux/fb.h>
-#include <linux/gpio.h>
/* Spitz/Akita GPIOs */
#ifndef _ASM_ARCH_TOSA_H_
#define _ASM_ARCH_TOSA_H_ 1
+#include "irqs.h" /* PXA_NR_BUILTIN_GPIO */
+
/* TOSA Chip selects */
#define TOSA_LCDC_PHYS PXA_CS4_PHYS
/* Internel Scoop */
#ifndef _TRIPEPS4_H_
#define _TRIPEPS4_H_
+#include "irqs.h" /* PXA_GPIO_TO_IRQ */
+
/* physical memory regions */
#define TRIZEPS4_FLASH_PHYS (PXA_CS0_PHYS) /* Flash region */
#define TRIZEPS4_DISK_PHYS (PXA_CS1_PHYS) /* Disk On Chip region */
--- /dev/null
+config ARCH_QCOM
+ bool "Qualcomm Support" if ARCH_MULTI_V7
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_GIC
+ select CLKSRC_OF
+ select GENERIC_CLOCKEVENTS
+ select HAVE_SMP
+ select QCOM_SCM if SMP
+ help
+ Support for Qualcomm's devicetree based systems.
+
+if ARCH_QCOM
+
+menu "Qualcomm SoC Selection"
+
+config ARCH_MSM8X60
+ bool "Enable support for MSM8X60"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8960
+ bool "Enable support for MSM8960"
+ select CLKSRC_QCOM
+
+config ARCH_MSM8974
+ bool "Enable support for MSM8974"
+ select HAVE_ARM_ARCH_TIMER
+
+endmenu
+
+config QCOM_SCM
+ bool
+
+endif
--- /dev/null
+obj-y := board.o
+obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o
+
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
--- /dev/null
+/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+extern struct smp_operations qcom_smp_ops;
+
+static const char * const qcom_dt_match[] __initconst = {
+ "qcom,msm8660-surf",
+ "qcom,msm8960-cdp",
+ NULL
+};
+
+static const char * const apq8074_dt_match[] __initconst = {
+ "qcom,apq8074-dragonboard",
+ NULL
+};
+
+DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
+ .smp = smp_ops(qcom_smp_ops),
+ .dt_compat = qcom_dt_match,
+MACHINE_END
+
+DT_MACHINE_START(APQ_DT, "Qualcomm (Flattened Device Tree)")
+ .dt_compat = apq8074_dt_match,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2014 The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cputype.h>
+#include <asm/smp_plat.h>
+
+#include "scm-boot.h"
+
+#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
+#define SCSS_CPU1CORE_RESET 0xD80
+#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
+
+extern void secondary_startup(void);
+
+static DEFINE_SPINLOCK(boot_lock);
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void __ref qcom_cpu_die(unsigned int cpu)
+{
+ wfi();
+}
+#endif
+
+static inline int get_core_count(void)
+{
+ /* 1 + the PART[1:0] field of MIDR */
+ return ((read_cpuid_id() >> 4) & 3) + 1;
+}
+
+static void qcom_secondary_init(unsigned int cpu)
+{
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+static void prepare_cold_cpu(unsigned int cpu)
+{
+ int ret;
+ ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
+ SCM_FLAG_COLDBOOT_CPU1);
+ if (ret == 0) {
+ void __iomem *sc1_base_ptr;
+ sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
+ if (sc1_base_ptr) {
+ writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
+ writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
+ writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
+ iounmap(sc1_base_ptr);
+ }
+ } else
+ printk(KERN_DEBUG "Failed to set secondary core boot "
+ "address\n");
+}
+
+static int qcom_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ static int cold_boot_done;
+
+ /* Only need to bring cpu out of reset this way once */
+ if (cold_boot_done == false) {
+ prepare_cold_cpu(cpu);
+ cold_boot_done = true;
+ }
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * Send the secondary CPU a soft interrupt, thereby causing
+ * the boot monitor to read the system wide flags register,
+ * and branch to the address found there.
+ */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return 0;
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system. The msm8x60
+ * does not support the ARM SCU, so just set the possible cpu mask to
+ * NR_CPUS.
+ */
+static void __init qcom_smp_init_cpus(void)
+{
+ unsigned int i, ncores = get_core_count();
+
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
+{
+}
+
+struct smp_operations qcom_smp_ops __initdata = {
+ .smp_init_cpus = qcom_smp_init_cpus,
+ .smp_prepare_cpus = qcom_smp_prepare_cpus,
+ .smp_secondary_init = qcom_secondary_init,
+ .smp_boot_secondary = qcom_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = qcom_cpu_die,
+#endif
+};
--- /dev/null
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "scm.h"
+#include "scm-boot.h"
+
+/*
+ * Set the cold/warm boot address for one of the CPU cores.
+ */
+int scm_set_boot_addr(phys_addr_t addr, int flags)
+{
+ struct {
+ unsigned int flags;
+ phys_addr_t addr;
+ } cmd;
+
+ cmd.addr = addr;
+ cmd.flags = flags;
+ return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
+ &cmd, sizeof(cmd), NULL, 0);
+}
+EXPORT_SYMBOL(scm_set_boot_addr);
--- /dev/null
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_SCM_BOOT_H
+#define __MACH_SCM_BOOT_H
+
+#define SCM_BOOT_ADDR 0x1
+#define SCM_FLAG_COLDBOOT_CPU1 0x1
+#define SCM_FLAG_WARMBOOT_CPU1 0x2
+#define SCM_FLAG_WARMBOOT_CPU0 0x4
+
+int scm_set_boot_addr(phys_addr_t addr, int flags);
+
+#endif
--- /dev/null
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ */
+
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+
+#include <asm/cacheflush.h>
+
+#include "scm.h"
+
+/* Cache line size for msm8x60 */
+#define CACHELINESIZE 32
+
+#define SCM_ENOMEM -5
+#define SCM_EOPNOTSUPP -4
+#define SCM_EINVAL_ADDR -3
+#define SCM_EINVAL_ARG -2
+#define SCM_ERROR -1
+#define SCM_INTERRUPTED 1
+
+static DEFINE_MUTEX(scm_lock);
+
+/**
+ * struct scm_command - one SCM command buffer
+ * @len: total available memory for command and response
+ * @buf_offset: start of command buffer
+ * @resp_hdr_offset: start of response buffer
+ * @id: command to be executed
+ * @buf: buffer returned from scm_get_command_buffer()
+ *
+ * An SCM command is laid out in memory as follows:
+ *
+ * ------------------- <--- struct scm_command
+ * | command header |
+ * ------------------- <--- scm_get_command_buffer()
+ * | command buffer |
+ * ------------------- <--- struct scm_response and
+ * | response header | scm_command_to_response()
+ * ------------------- <--- scm_get_response_buffer()
+ * | response buffer |
+ * -------------------
+ *
+ * There can be arbitrary padding between the headers and buffers so
+ * you should always use the appropriate scm_get_*_buffer() routines
+ * to access the buffers in a safe manner.
+ */
+struct scm_command {
+ u32 len;
+ u32 buf_offset;
+ u32 resp_hdr_offset;
+ u32 id;
+ u32 buf[0];
+};
+
+/**
+ * struct scm_response - one SCM response buffer
+ * @len: total available memory for response
+ * @buf_offset: start of response data relative to start of scm_response
+ * @is_complete: indicates if the command has finished processing
+ */
+struct scm_response {
+ u32 len;
+ u32 buf_offset;
+ u32 is_complete;
+};
+
+/**
+ * alloc_scm_command() - Allocate an SCM command
+ * @cmd_size: size of the command buffer
+ * @resp_size: size of the response buffer
+ *
+ * Allocate an SCM command, including enough room for the command
+ * and response headers as well as the command and response buffers.
+ *
+ * Returns a valid &scm_command on success or %NULL if the allocation fails.
+ */
+static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
+{
+ struct scm_command *cmd;
+ size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
+ resp_size;
+
+ cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
+ if (cmd) {
+ cmd->len = len;
+ cmd->buf_offset = offsetof(struct scm_command, buf);
+ cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
+ }
+ return cmd;
+}
+
+/**
+ * free_scm_command() - Free an SCM command
+ * @cmd: command to free
+ *
+ * Free an SCM command.
+ */
+static inline void free_scm_command(struct scm_command *cmd)
+{
+ kfree(cmd);
+}
+
+/**
+ * scm_command_to_response() - Get a pointer to a scm_response
+ * @cmd: command
+ *
+ * Returns a pointer to a response for a command.
+ */
+static inline struct scm_response *scm_command_to_response(
+ const struct scm_command *cmd)
+{
+ return (void *)cmd + cmd->resp_hdr_offset;
+}
+
+/**
+ * scm_get_command_buffer() - Get a pointer to a command buffer
+ * @cmd: command
+ *
+ * Returns a pointer to the command buffer of a command.
+ */
+static inline void *scm_get_command_buffer(const struct scm_command *cmd)
+{
+ return (void *)cmd->buf;
+}
+
+/**
+ * scm_get_response_buffer() - Get a pointer to a response buffer
+ * @rsp: response
+ *
+ * Returns a pointer to a response buffer of a response.
+ */
+static inline void *scm_get_response_buffer(const struct scm_response *rsp)
+{
+ return (void *)rsp + rsp->buf_offset;
+}
+
+static int scm_remap_error(int err)
+{
+ switch (err) {
+ case SCM_ERROR:
+ return -EIO;
+ case SCM_EINVAL_ADDR:
+ case SCM_EINVAL_ARG:
+ return -EINVAL;
+ case SCM_EOPNOTSUPP:
+ return -EOPNOTSUPP;
+ case SCM_ENOMEM:
+ return -ENOMEM;
+ }
+ return -EINVAL;
+}
+
+static u32 smc(u32 cmd_addr)
+{
+ int context_id;
+ register u32 r0 asm("r0") = 1;
+ register u32 r1 asm("r1") = (u32)&context_id;
+ register u32 r2 asm("r2") = cmd_addr;
+ do {
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r0")
+ __asmeq("%2", "r1")
+ __asmeq("%3", "r2")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0)
+ : "r" (r0), "r" (r1), "r" (r2)
+ : "r3");
+ } while (r0 == SCM_INTERRUPTED);
+
+ return r0;
+}
+
+static int __scm_call(const struct scm_command *cmd)
+{
+ int ret;
+ u32 cmd_addr = virt_to_phys(cmd);
+
+ /*
+ * Flush the entire cache here so callers don't have to remember
+ * to flush the cache when passing physical addresses to the secure
+ * side in the buffer.
+ */
+ flush_cache_all();
+ ret = smc(cmd_addr);
+ if (ret < 0)
+ ret = scm_remap_error(ret);
+
+ return ret;
+}
+
+/**
+ * scm_call() - Send an SCM command
+ * @svc_id: service identifier
+ * @cmd_id: command identifier
+ * @cmd_buf: command buffer
+ * @cmd_len: length of the command buffer
+ * @resp_buf: response buffer
+ * @resp_len: length of the response buffer
+ *
+ * Sends a command to the SCM and waits for the command to finish processing.
+ */
+int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
+ void *resp_buf, size_t resp_len)
+{
+ int ret;
+ struct scm_command *cmd;
+ struct scm_response *rsp;
+
+ cmd = alloc_scm_command(cmd_len, resp_len);
+ if (!cmd)
+ return -ENOMEM;
+
+ cmd->id = (svc_id << 10) | cmd_id;
+ if (cmd_buf)
+ memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
+
+ mutex_lock(&scm_lock);
+ ret = __scm_call(cmd);
+ mutex_unlock(&scm_lock);
+ if (ret)
+ goto out;
+
+ rsp = scm_command_to_response(cmd);
+ do {
+ u32 start = (u32)rsp;
+ u32 end = (u32)scm_get_response_buffer(rsp) + resp_len;
+ start &= ~(CACHELINESIZE - 1);
+ while (start < end) {
+ asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
+ : "memory");
+ start += CACHELINESIZE;
+ }
+ } while (!rsp->is_complete);
+
+ if (resp_buf)
+ memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
+out:
+ free_scm_command(cmd);
+ return ret;
+}
+EXPORT_SYMBOL(scm_call);
+
+u32 scm_get_version(void)
+{
+ int context_id;
+ static u32 version = -1;
+ register u32 r0 asm("r0");
+ register u32 r1 asm("r1");
+
+ if (version != -1)
+ return version;
+
+ mutex_lock(&scm_lock);
+
+ r0 = 0x1 << 8;
+ r1 = (u32)&context_id;
+ do {
+ asm volatile(
+ __asmeq("%0", "r0")
+ __asmeq("%1", "r1")
+ __asmeq("%2", "r0")
+ __asmeq("%3", "r1")
+#ifdef REQUIRES_SEC
+ ".arch_extension sec\n"
+#endif
+ "smc #0 @ switch to secure world\n"
+ : "=r" (r0), "=r" (r1)
+ : "r" (r0), "r" (r1)
+ : "r2", "r3");
+ } while (r0 == SCM_INTERRUPTED);
+
+ version = r1;
+ mutex_unlock(&scm_lock);
+
+ return version;
+}
+EXPORT_SYMBOL(scm_get_version);
--- /dev/null
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MACH_SCM_H
+#define __MACH_SCM_H
+
+#define SCM_SVC_BOOT 0x1
+#define SCM_SVC_PIL 0x2
+
+extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
+ void *resp_buf, size_t resp_len);
+
+#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
+
+extern u32 scm_get_version(void);
+
+#endif
select ARM_GIC
select CACHE_L2X0
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select DW_APB_TIMER_OF
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
bool "Renesas ARM SoCs" if ARCH_MULTI_V7
depends on MMU
select ARCH_SHMOBILE
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if LOCAL_TIMERS
- select HAVE_SMP
+ select HAVE_ARM_TWD if SMP
select ARM_GIC
- select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select NO_IOPORT
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
- select CLKDEV_LOOKUP
if ARCH_SHMOBILE_MULTI
#include <mach/common.h>
#include <mach/r7s72100.h>
-/* registers */
+/* Frequency Control Registers */
#define FRQCR 0xfcfe0010
#define FRQCR2 0xfcfe0014
+/* Standby Control Registers */
#define STBCR3 0xfcfe0420
#define STBCR4 0xfcfe0424
+#define STBCR7 0xfcfe0430
#define STBCR9 0xfcfe0438
+#define STBCR10 0xfcfe043c
#define PLL_RATE 30
static unsigned long bus_recalc(struct clk *clk)
{
- return clk->parent->rate * 2 / 3;
+ return clk->parent->rate / 3;
}
static struct sh_clk_ops bus_clk_ops = {
| CLK_ENABLE_ON_INIT),
};
-enum { MSTP97, MSTP96, MSTP95, MSTP94,
+enum {
+ MSTP107, MSTP106, MSTP105, MSTP104, MSTP103,
+ MSTP97, MSTP96, MSTP95, MSTP94,
+ MSTP74,
MSTP47, MSTP46, MSTP45, MSTP44, MSTP43, MSTP42, MSTP41, MSTP40,
- MSTP33, MSTP_NR };
+ MSTP33, MSTP_NR
+};
static struct clk mstp_clks[MSTP_NR] = {
+ [MSTP107] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 7, 0), /* RSPI0 */
+ [MSTP106] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 6, 0), /* RSPI1 */
+ [MSTP105] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 5, 0), /* RSPI2 */
+ [MSTP104] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 4, 0), /* RSPI3 */
+ [MSTP103] = SH_CLK_MSTP8(&peripheral1_clk, STBCR10, 3, 0), /* RSPI4 */
[MSTP97] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 7, 0), /* RIIC0 */
[MSTP96] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 6, 0), /* RIIC1 */
[MSTP95] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 5, 0), /* RIIC2 */
[MSTP94] = SH_CLK_MSTP8(&peripheral0_clk, STBCR9, 4, 0), /* RIIC3 */
+ [MSTP74] = SH_CLK_MSTP8(&peripheral1_clk, STBCR7, 4, 0), /* Ether */
[MSTP47] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 7, 0), /* SCIF0 */
[MSTP46] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 6, 0), /* SCIF1 */
[MSTP45] = SH_CLK_MSTP8(&peripheral1_clk, STBCR4, 5, 0), /* SCIF2 */
CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
/* MSTP clocks */
+ CLKDEV_DEV_ID("rspi-rz.0", &mstp_clks[MSTP107]),
+ CLKDEV_DEV_ID("rspi-rz.1", &mstp_clks[MSTP106]),
+ CLKDEV_DEV_ID("rspi-rz.2", &mstp_clks[MSTP105]),
+ CLKDEV_DEV_ID("rspi-rz.3", &mstp_clks[MSTP104]),
+ CLKDEV_DEV_ID("rspi-rz.4", &mstp_clks[MSTP103]),
+ CLKDEV_DEV_ID("e800c800.spi", &mstp_clks[MSTP107]),
+ CLKDEV_DEV_ID("e800d000.spi", &mstp_clks[MSTP106]),
+ CLKDEV_DEV_ID("e800d800.spi", &mstp_clks[MSTP105]),
+ CLKDEV_DEV_ID("e800e000.spi", &mstp_clks[MSTP104]),
+ CLKDEV_DEV_ID("e800e800.spi", &mstp_clks[MSTP103]),
+ CLKDEV_DEV_ID("fcfee000.i2c", &mstp_clks[MSTP97]),
+ CLKDEV_DEV_ID("fcfee400.i2c", &mstp_clks[MSTP96]),
+ CLKDEV_DEV_ID("fcfee800.i2c", &mstp_clks[MSTP95]),
+ CLKDEV_DEV_ID("fcfeec00.i2c", &mstp_clks[MSTP94]),
+ CLKDEV_DEV_ID("r7s72100-ether", &mstp_clks[MSTP74]),
CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
/* ICK */
CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */
CLKDEV_DEV_ID("rcar_sound", &mstp_clks[MSTP008]), /* SRU */
+ CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
+ CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
+ CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
+ CLKDEV_ICK_ID("clk_i", "rcar_sound", &s1_clk),
CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP012]),
CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP011]),
CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP010]),
[MSTP322] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 22, 0), /* SDHI1 */
[MSTP321] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 21, 0), /* SDHI2 */
[MSTP320] = SH_CLK_MSTP32(&clkp_clk, MSTPCR3, 20, 0), /* SDHI3 */
- [MSTP120] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 20, 0), /* VIN3 */
- [MSTP116] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 16, 0), /* PCIe */
- [MSTP115] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 15, 0), /* SATA */
- [MSTP114] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 14, 0), /* Ether */
- [MSTP110] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 10, 0), /* VIN0 */
- [MSTP109] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 9, 0), /* VIN1 */
- [MSTP108] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 8, 0), /* VIN2 */
- [MSTP103] = SH_CLK_MSTP32(&clks_clk, MSTPCR1, 3, 0), /* DU */
- [MSTP101] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 1, 0), /* USB2 */
- [MSTP100] = SH_CLK_MSTP32(&clkp_clk, MSTPCR1, 0, 0), /* USB0/1 */
+ [MSTP120] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 20, MSTPSR1, 0), /* VIN3 */
+ [MSTP116] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 16, MSTPSR1, 0), /* PCIe */
+ [MSTP115] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 15, MSTPSR1, 0), /* SATA */
+ [MSTP114] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 14, MSTPSR1, 0), /* Ether */
+ [MSTP110] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 10, MSTPSR1, 0), /* VIN0 */
+ [MSTP109] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 9, MSTPSR1, 0), /* VIN1 */
+ [MSTP108] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 8, MSTPSR1, 0), /* VIN2 */
+ [MSTP103] = SH_CLK_MSTP32_STS(&clks_clk, MSTPCR1, 3, MSTPSR1, 0), /* DU */
+ [MSTP101] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 1, MSTPSR1, 0), /* USB2 */
+ [MSTP100] = SH_CLK_MSTP32_STS(&clkp_clk, MSTPCR1, 0, MSTPSR1, 0), /* USB0/1 */
[MSTP030] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 30, 0), /* I2C0 */
[MSTP029] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 29, 0), /* I2C1 */
[MSTP028] = SH_CLK_MSTP32(&clkp_clk, MSTPCR0, 28, 0), /* I2C2 */
* see "p1 / 2" on R8A7790_CLOCK_ROOT() below
*/
-#define CPG_BASE 0xe6150000
-#define CPG_LEN 0x1000
-
-#define SMSTPCR1 0xe6150134
-#define SMSTPCR2 0xe6150138
-#define SMSTPCR3 0xe615013c
-#define SMSTPCR5 0xe6150144
-#define SMSTPCR7 0xe615014c
-#define SMSTPCR8 0xe6150990
-#define SMSTPCR9 0xe6150994
-#define SMSTPCR10 0xe6150998
+#define CPG_BASE 0xe6150000
+#define CPG_LEN 0x1000
+
+#define SMSTPCR1 0xe6150134
+#define SMSTPCR2 0xe6150138
+#define SMSTPCR3 0xe615013c
+#define SMSTPCR5 0xe6150144
+#define SMSTPCR7 0xe615014c
+#define SMSTPCR8 0xe6150990
+#define SMSTPCR9 0xe6150994
+#define SMSTPCR10 0xe6150998
+
+#define MSTPSR1 IOMEM(0xe6150038)
+#define MSTPSR2 IOMEM(0xe6150040)
+#define MSTPSR3 IOMEM(0xe6150048)
+#define MSTPSR5 IOMEM(0xe615003c)
+#define MSTPSR7 IOMEM(0xe61501c4)
+#define MSTPSR8 IOMEM(0xe61509a0)
+#define MSTPSR9 IOMEM(0xe61509a4)
+#define MSTPSR10 IOMEM(0xe61509a8)
#define SDCKCR 0xE6150074
#define SD2CKCR 0xE6150078
.ops = &followparent_clk_ops,
};
+static struct clk audio_clk_a = {
+};
+
+static struct clk audio_clk_b = {
+};
+
+static struct clk audio_clk_c = {
+};
+
/*
* clock ratio of these clock will be updated
* on r8a7790_clock_init()
SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15);
static struct clk *main_clks[] = {
+ &audio_clk_a,
+ &audio_clk_b,
+ &audio_clk_c,
&extal_clk,
&extal_div2_clk,
&main_clk,
/* MSTP */
enum {
+ MSTP1017, /* parent of SCU */
+
+ MSTP1031, MSTP1030,
+ MSTP1029, MSTP1028, MSTP1027, MSTP1026, MSTP1025, MSTP1024, MSTP1023, MSTP1022,
MSTP1015, MSTP1014, MSTP1013, MSTP1012, MSTP1011, MSTP1010,
MSTP1009, MSTP1008, MSTP1007, MSTP1006, MSTP1005,
MSTP931, MSTP930, MSTP929, MSTP928,
MSTP917,
+ MSTP815, MSTP814,
MSTP813,
+ MSTP811, MSTP810, MSTP809, MSTP808,
MSTP726, MSTP725, MSTP724, MSTP723, MSTP722, MSTP721, MSTP720,
MSTP717, MSTP716,
- MSTP704,
+ MSTP704, MSTP703,
MSTP522,
+ MSTP502, MSTP501,
MSTP315, MSTP314, MSTP313, MSTP312, MSTP311, MSTP305, MSTP304,
MSTP216, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202,
MSTP124,
};
static struct clk mstp_clks[MSTP_NR] = {
- [MSTP1015] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 15, 0), /* SSI0 */
- [MSTP1014] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 14, 0), /* SSI1 */
- [MSTP1013] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 13, 0), /* SSI2 */
- [MSTP1012] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 12, 0), /* SSI3 */
- [MSTP1011] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 11, 0), /* SSI4 */
- [MSTP1010] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 10, 0), /* SSI5 */
- [MSTP1009] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 9, 0), /* SSI6 */
- [MSTP1008] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 8, 0), /* SSI7 */
- [MSTP1007] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 7, 0), /* SSI8 */
- [MSTP1006] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 6, 0), /* SSI9 */
- [MSTP1005] = SH_CLK_MSTP32(&p_clk, SMSTPCR10, 5, 0), /* SSI ALL */
- [MSTP931] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 31, 0), /* I2C0 */
- [MSTP930] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 30, 0), /* I2C1 */
- [MSTP929] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 29, 0), /* I2C2 */
- [MSTP928] = SH_CLK_MSTP32(&p_clk, SMSTPCR9, 28, 0), /* I2C3 */
- [MSTP917] = SH_CLK_MSTP32(&qspi_clk, SMSTPCR9, 17, 0), /* QSPI */
- [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
- [MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
- [MSTP725] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 25, 0), /* LVDS1 */
- [MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
- [MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
- [MSTP722] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 22, 0), /* DU2 */
- [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
- [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
- [MSTP717] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 17, 0), /* HSCIF0 */
- [MSTP716] = SH_CLK_MSTP32(&zs_clk, SMSTPCR7, 16, 0), /* HSCIF1 */
- [MSTP704] = SH_CLK_MSTP32(&mp_clk, SMSTPCR7, 4, 0), /* HSUSB */
- [MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
- [MSTP315] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, 0), /* MMC0 */
- [MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_SD0], SMSTPCR3, 14, 0), /* SDHI0 */
- [MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_SD1], SMSTPCR3, 13, 0), /* SDHI1 */
- [MSTP312] = SH_CLK_MSTP32(&div6_clks[DIV6_SD2], SMSTPCR3, 12, 0), /* SDHI2 */
- [MSTP311] = SH_CLK_MSTP32(&div6_clks[DIV6_SD3], SMSTPCR3, 11, 0), /* SDHI3 */
- [MSTP305] = SH_CLK_MSTP32(&div6_clks[DIV6_MMC1], SMSTPCR3, 5, 0), /* MMC1 */
- [MSTP304] = SH_CLK_MSTP32(&cp_clk, SMSTPCR3, 4, 0), /* TPU0 */
- [MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
- [MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
- [MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
- [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
- [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
- [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
- [MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
+ [MSTP1031] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 31, MSTPSR10, 0), /* SCU0 */
+ [MSTP1030] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 30, MSTPSR10, 0), /* SCU1 */
+ [MSTP1029] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 29, MSTPSR10, 0), /* SCU2 */
+ [MSTP1028] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 28, MSTPSR10, 0), /* SCU3 */
+ [MSTP1027] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 27, MSTPSR10, 0), /* SCU4 */
+ [MSTP1026] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 26, MSTPSR10, 0), /* SCU5 */
+ [MSTP1025] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 25, MSTPSR10, 0), /* SCU6 */
+ [MSTP1024] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 24, MSTPSR10, 0), /* SCU7 */
+ [MSTP1023] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 23, MSTPSR10, 0), /* SCU8 */
+ [MSTP1022] = SH_CLK_MSTP32_STS(&mstp_clks[MSTP1017], SMSTPCR10, 22, MSTPSR10, 0), /* SCU9 */
+ [MSTP1017] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 17, MSTPSR10, 0), /* SCU */
+ [MSTP1015] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 15, MSTPSR10, 0), /* SSI0 */
+ [MSTP1014] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 14, MSTPSR10, 0), /* SSI1 */
+ [MSTP1013] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 13, MSTPSR10, 0), /* SSI2 */
+ [MSTP1012] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 12, MSTPSR10, 0), /* SSI3 */
+ [MSTP1011] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 11, MSTPSR10, 0), /* SSI4 */
+ [MSTP1010] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 10, MSTPSR10, 0), /* SSI5 */
+ [MSTP1009] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 9, MSTPSR10, 0), /* SSI6 */
+ [MSTP1008] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 8, MSTPSR10, 0), /* SSI7 */
+ [MSTP1007] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 7, MSTPSR10, 0), /* SSI8 */
+ [MSTP1006] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 6, MSTPSR10, 0), /* SSI9 */
+ [MSTP1005] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR10, 5, MSTPSR10, 0), /* SSI ALL */
+ [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
+ [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
+ [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
+ [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
+ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
+ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
+ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
+ [MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /* Ether */
+ [MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0), /* VIN0 */
+ [MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8, 0), /* VIN1 */
+ [MSTP809] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 9, MSTPSR8, 0), /* VIN2 */
+ [MSTP808] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 8, MSTPSR8, 0), /* VIN3 */
+ [MSTP726] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 26, MSTPSR7, 0), /* LVDS0 */
+ [MSTP725] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 25, MSTPSR7, 0), /* LVDS1 */
+ [MSTP724] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 24, MSTPSR7, 0), /* DU0 */
+ [MSTP723] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 23, MSTPSR7, 0), /* DU1 */
+ [MSTP722] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 22, MSTPSR7, 0), /* DU2 */
+ [MSTP721] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 21, MSTPSR7, 0), /* SCIF0 */
+ [MSTP720] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 20, MSTPSR7, 0), /* SCIF1 */
+ [MSTP717] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR7, 17, MSTPSR7, 0), /* HSCIF0 */
+ [MSTP716] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR7, 16, MSTPSR7, 0), /* HSCIF1 */
+ [MSTP704] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR7, 4, MSTPSR7, 0), /* HSUSB */
+ [MSTP703] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR7, 3, MSTPSR7, 0), /* EHCI */
+ [MSTP522] = SH_CLK_MSTP32_STS(&extal_clk, SMSTPCR5, 22, MSTPSR5, 0), /* Thermal */
+ [MSTP502] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR5, 2, MSTPSR5, 0), /* Audio-DMAC low */
+ [MSTP501] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR5, 1, MSTPSR5, 0), /* Audio-DMAC hi */
+ [MSTP315] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_MMC0], SMSTPCR3, 15, MSTPSR3, 0), /* MMC0 */
+ [MSTP314] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD0], SMSTPCR3, 14, MSTPSR3, 0), /* SDHI0 */
+ [MSTP313] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD1], SMSTPCR3, 13, MSTPSR3, 0), /* SDHI1 */
+ [MSTP312] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD2], SMSTPCR3, 12, MSTPSR3, 0), /* SDHI2 */
+ [MSTP311] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD3], SMSTPCR3, 11, MSTPSR3, 0), /* SDHI3 */
+ [MSTP305] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_MMC1], SMSTPCR3, 5, MSTPSR3, 0), /* MMC1 */
+ [MSTP304] = SH_CLK_MSTP32_STS(&cp_clk, SMSTPCR3, 4, MSTPSR3, 0), /* TPU0 */
+ [MSTP216] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 16, MSTPSR2, 0), /* SCIFB2 */
+ [MSTP207] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 7, MSTPSR2, 0), /* SCIFB1 */
+ [MSTP206] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 6, MSTPSR2, 0), /* SCIFB0 */
+ [MSTP204] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 4, MSTPSR2, 0), /* SCIFA0 */
+ [MSTP203] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 3, MSTPSR2, 0), /* SCIFA1 */
+ [MSTP202] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 2, MSTPSR2, 0), /* SCIFA2 */
+ [MSTP124] = SH_CLK_MSTP32_STS(&rclk_clk, SMSTPCR1, 24, MSTPSR1, 0), /* CMT0 */
};
static struct clk_lookup lookups[] = {
/* main clocks */
+ CLKDEV_CON_ID("audio_clk_a", &audio_clk_a),
+ CLKDEV_CON_ID("audio_clk_b", &audio_clk_b),
+ CLKDEV_CON_ID("audio_clk_c", &audio_clk_c),
+ CLKDEV_CON_ID("audio_clk_internal", &m2_clk),
CLKDEV_CON_ID("extal", &extal_clk),
CLKDEV_CON_ID("extal_div2", &extal_div2_clk),
CLKDEV_CON_ID("main", &main_clk),
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]),
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
- CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
- CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]),
- CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]),
- CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]),
CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
- CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
+ CLKDEV_DEV_ID("r8a7790-vin.0", &mstp_clks[MSTP811]),
+ CLKDEV_DEV_ID("r8a7790-vin.1", &mstp_clks[MSTP810]),
+ CLKDEV_DEV_ID("r8a7790-vin.2", &mstp_clks[MSTP809]),
+ CLKDEV_DEV_ID("r8a7790-vin.3", &mstp_clks[MSTP808]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
- CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]),
+ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP502]),
+ CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP501]),
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]),
- CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]),
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]),
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]),
- CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]),
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("ee160000.sd", &mstp_clks[MSTP311]),
CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]),
- CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]),
CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP704]),
+ CLKDEV_DEV_ID("pci-rcar-gen2.0", &mstp_clks[MSTP703]),
+ CLKDEV_DEV_ID("pci-rcar-gen2.1", &mstp_clks[MSTP703]),
+ CLKDEV_DEV_ID("pci-rcar-gen2.2", &mstp_clks[MSTP703]),
+ CLKDEV_DEV_ID("sata-r8a7790.0", &mstp_clks[MSTP815]),
+ CLKDEV_DEV_ID("sata-r8a7790.1", &mstp_clks[MSTP814]),
/* ICK */
CLKDEV_ICK_ID("usbhs", "usb_phy_rcar_gen2", &mstp_clks[MSTP704]),
CLKDEV_ICK_ID("du.0", "rcar-du-r8a7790", &mstp_clks[MSTP724]),
CLKDEV_ICK_ID("du.1", "rcar-du-r8a7790", &mstp_clks[MSTP723]),
CLKDEV_ICK_ID("du.2", "rcar-du-r8a7790", &mstp_clks[MSTP722]),
+ CLKDEV_ICK_ID("clk_a", "rcar_sound", &audio_clk_a),
+ CLKDEV_ICK_ID("clk_b", "rcar_sound", &audio_clk_b),
+ CLKDEV_ICK_ID("clk_c", "rcar_sound", &audio_clk_c),
+ CLKDEV_ICK_ID("clk_i", "rcar_sound", &m2_clk),
+ CLKDEV_ICK_ID("scu.0", "rcar_sound", &mstp_clks[MSTP1031]),
+ CLKDEV_ICK_ID("scu.1", "rcar_sound", &mstp_clks[MSTP1030]),
+ CLKDEV_ICK_ID("scu.2", "rcar_sound", &mstp_clks[MSTP1029]),
+ CLKDEV_ICK_ID("scu.3", "rcar_sound", &mstp_clks[MSTP1028]),
+ CLKDEV_ICK_ID("scu.4", "rcar_sound", &mstp_clks[MSTP1027]),
+ CLKDEV_ICK_ID("scu.5", "rcar_sound", &mstp_clks[MSTP1026]),
+ CLKDEV_ICK_ID("scu.6", "rcar_sound", &mstp_clks[MSTP1025]),
+ CLKDEV_ICK_ID("scu.7", "rcar_sound", &mstp_clks[MSTP1024]),
+ CLKDEV_ICK_ID("scu.8", "rcar_sound", &mstp_clks[MSTP1023]),
+ CLKDEV_ICK_ID("scu.9", "rcar_sound", &mstp_clks[MSTP1022]),
CLKDEV_ICK_ID("ssi.0", "rcar_sound", &mstp_clks[MSTP1015]),
CLKDEV_ICK_ID("ssi.1", "rcar_sound", &mstp_clks[MSTP1014]),
CLKDEV_ICK_ID("ssi.2", "rcar_sound", &mstp_clks[MSTP1013]),
#define SMSTPCR10 0xE6150998
#define SMSTPCR11 0xE615099C
+#define MSTPSR1 IOMEM(0xe6150038)
+#define MSTPSR2 IOMEM(0xe6150040)
+#define MSTPSR3 IOMEM(0xe6150048)
+#define MSTPSR5 IOMEM(0xe615003c)
+#define MSTPSR7 IOMEM(0xe61501c4)
+#define MSTPSR8 IOMEM(0xe61509a0)
+#define MSTPSR9 IOMEM(0xe61509a4)
+#define MSTPSR11 IOMEM(0xe61509ac)
+
#define MODEMR 0xE6160060
#define SDCKCR 0xE6150074
-#define SD2CKCR 0xE6150078
-#define SD3CKCR 0xE615007C
+#define SD1CKCR 0xE6150078
+#define SD2CKCR 0xE615026c
#define MMC0CKCR 0xE6150240
#define MMC1CKCR 0xE6150244
#define SSPCKCR 0xE6150248
*/
SH_FIXED_RATIO_CLK_SET(pll1_clk, main_clk, 1, 1);
SH_FIXED_RATIO_CLK_SET(pll3_clk, main_clk, 1, 1);
+SH_FIXED_RATIO_CLK_SET(qspi_clk, pll1_clk, 1, 1);
/* fixed ratio clock */
SH_FIXED_RATIO_CLK_SET(extal_div2_clk, extal_clk, 1, 2);
SH_FIXED_RATIO_CLK_SET(p_clk, pll1_clk, 1, 24);
SH_FIXED_RATIO_CLK_SET(rclk_clk, pll1_clk, 1, (48 * 1024));
SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15);
+SH_FIXED_RATIO_CLK_SET(zg_clk, pll1_clk, 1, 3);
SH_FIXED_RATIO_CLK_SET(zx_clk, pll1_clk, 1, 3);
+SH_FIXED_RATIO_CLK_SET(zs_clk, pll1_clk, 1, 6);
static struct clk *main_clks[] = {
&extal_clk,
&pll3_clk,
&hp_clk,
&p_clk,
+ &qspi_clk,
&rclk_clk,
&mp_clk,
&cp_clk,
+ &zg_clk,
&zx_clk,
+ &zs_clk,
+};
+
+/* SDHI (DIV4) clock */
+static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10 };
+
+static struct clk_div_mult_table div4_div_mult_table = {
+ .divisors = divisors,
+ .nr_divisors = ARRAY_SIZE(divisors),
+};
+
+static struct clk_div4_table div4_table = {
+ .div_mult_table = &div4_div_mult_table,
+};
+
+enum {
+ DIV4_SDH, DIV4_SD0,
+ DIV4_NR
+};
+
+static struct clk div4_clks[DIV4_NR] = {
+ [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
+ [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1de0, CLK_ENABLE_ON_INIT),
+};
+
+/* DIV6 clocks */
+enum {
+ DIV6_SD1, DIV6_SD2,
+ DIV6_NR
+};
+
+static struct clk div6_clks[DIV6_NR] = {
+ [DIV6_SD1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0),
+ [DIV6_SD2] = SH_CLK_DIV6(&pll1_div2_clk, SD2CKCR, 0),
};
/* MSTP */
enum {
+ MSTP1108, MSTP1107, MSTP1106,
+ MSTP931, MSTP930, MSTP929, MSTP928, MSTP927, MSTP925,
+ MSTP917,
+ MSTP815, MSTP814,
MSTP813,
+ MSTP811, MSTP810, MSTP809,
MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
MSTP719, MSTP718, MSTP715, MSTP714,
MSTP522,
+ MSTP314, MSTP312, MSTP311,
MSTP216, MSTP207, MSTP206,
- MSTP204, MSTP203, MSTP202, MSTP1105, MSTP1106, MSTP1107,
+ MSTP204, MSTP203, MSTP202,
MSTP124,
MSTP_NR
};
static struct clk mstp_clks[MSTP_NR] = {
- [MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
- [MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
- [MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
- [MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
- [MSTP721] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 21, 0), /* SCIF0 */
- [MSTP720] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 20, 0), /* SCIF1 */
- [MSTP719] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 19, 0), /* SCIF2 */
- [MSTP718] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 18, 0), /* SCIF3 */
- [MSTP715] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 15, 0), /* SCIF4 */
- [MSTP714] = SH_CLK_MSTP32(&p_clk, SMSTPCR7, 14, 0), /* SCIF5 */
- [MSTP522] = SH_CLK_MSTP32(&extal_clk, SMSTPCR5, 22, 0), /* Thermal */
- [MSTP216] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 16, 0), /* SCIFB2 */
- [MSTP207] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 7, 0), /* SCIFB1 */
- [MSTP206] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 6, 0), /* SCIFB0 */
- [MSTP204] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 4, 0), /* SCIFA0 */
- [MSTP203] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 3, 0), /* SCIFA1 */
- [MSTP202] = SH_CLK_MSTP32(&mp_clk, SMSTPCR2, 2, 0), /* SCIFA2 */
- [MSTP1105] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 5, 0), /* SCIFA3 */
- [MSTP1106] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 6, 0), /* SCIFA4 */
- [MSTP1107] = SH_CLK_MSTP32(&mp_clk, SMSTPCR11, 7, 0), /* SCIFA5 */
- [MSTP124] = SH_CLK_MSTP32(&rclk_clk, SMSTPCR1, 24, 0), /* CMT0 */
+ [MSTP1108] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 8, MSTPSR11, 0), /* SCIFA5 */
+ [MSTP1107] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 7, MSTPSR11, 0), /* SCIFA4 */
+ [MSTP1106] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 6, MSTPSR11, 0), /* SCIFA3 */
+ [MSTP931] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
+ [MSTP930] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
+ [MSTP929] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
+ [MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
+ [MSTP927] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */
+ [MSTP925] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */
+ [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
+ [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
+ [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
+ [MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /* Ether */
+ [MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0), /* VIN0 */
+ [MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8, 0), /* VIN1 */
+ [MSTP809] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 9, MSTPSR8, 0), /* VIN2 */
+ [MSTP726] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 26, MSTPSR7, 0), /* LVDS0 */
+ [MSTP724] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 24, MSTPSR7, 0), /* DU0 */
+ [MSTP723] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 23, MSTPSR7, 0), /* DU1 */
+ [MSTP721] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 21, MSTPSR7, 0), /* SCIF0 */
+ [MSTP720] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 20, MSTPSR7, 0), /* SCIF1 */
+ [MSTP719] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 19, MSTPSR7, 0), /* SCIF2 */
+ [MSTP718] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 18, MSTPSR7, 0), /* SCIF3 */
+ [MSTP715] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 15, MSTPSR7, 0), /* SCIF4 */
+ [MSTP714] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 14, MSTPSR7, 0), /* SCIF5 */
+ [MSTP522] = SH_CLK_MSTP32_STS(&extal_clk, SMSTPCR5, 22, MSTPSR5, 0), /* Thermal */
+ [MSTP314] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD0], SMSTPCR3, 14, MSTPSR3, 0), /* SDHI0 */
+ [MSTP312] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD1], SMSTPCR3, 12, MSTPSR3, 0), /* SDHI1 */
+ [MSTP311] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD2], SMSTPCR3, 11, MSTPSR3, 0), /* SDHI2 */
+ [MSTP216] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 16, MSTPSR2, 0), /* SCIFB2 */
+ [MSTP207] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 7, MSTPSR2, 0), /* SCIFB1 */
+ [MSTP206] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 6, MSTPSR2, 0), /* SCIFB0 */
+ [MSTP204] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 4, MSTPSR2, 0), /* SCIFA0 */
+ [MSTP203] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 3, MSTPSR2, 0), /* SCIFA1 */
+ [MSTP202] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 2, MSTPSR2, 0), /* SCIFA2 */
+ [MSTP124] = SH_CLK_MSTP32_STS(&rclk_clk, SMSTPCR1, 24, MSTPSR1, 0), /* CMT0 */
};
static struct clk_lookup lookups[] = {
CLKDEV_CON_ID("pll1", &pll1_clk),
CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk),
CLKDEV_CON_ID("pll3", &pll3_clk),
+ CLKDEV_CON_ID("zg", &zg_clk),
+ CLKDEV_CON_ID("zs", &zs_clk),
CLKDEV_CON_ID("hp", &hp_clk),
CLKDEV_CON_ID("p", &p_clk),
+ CLKDEV_CON_ID("qspi", &qspi_clk),
CLKDEV_CON_ID("rclk", &rclk_clk),
CLKDEV_CON_ID("mp", &mp_clk),
CLKDEV_CON_ID("cp", &cp_clk),
CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */
CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */
CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */
- CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */
- CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
- CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
+ CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1106]), /* SCIFA3 */
+ CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1107]), /* SCIFA4 */
+ CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1108]), /* SCIFA5 */
+ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
+ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP312]),
+ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]),
CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
- CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
+ CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.4", &mstp_clks[MSTP927]),
+ CLKDEV_DEV_ID("i2c-rcar_gen2.5", &mstp_clks[MSTP925]),
CLKDEV_DEV_ID("r8a7791-ether", &mstp_clks[MSTP813]), /* Ether */
+ CLKDEV_DEV_ID("r8a7791-vin.0", &mstp_clks[MSTP811]),
+ CLKDEV_DEV_ID("r8a7791-vin.1", &mstp_clks[MSTP810]),
+ CLKDEV_DEV_ID("r8a7791-vin.2", &mstp_clks[MSTP809]),
+ CLKDEV_DEV_ID("sata-r8a7791.0", &mstp_clks[MSTP815]),
+ CLKDEV_DEV_ID("sata-r8a7791.1", &mstp_clks[MSTP814]),
};
#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31) \
break;
}
+ if ((mode & (MD(3) | MD(2) | MD(1))) == MD(2))
+ SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 16);
+ else
+ SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 20);
+
for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
ret = clk_register(main_clks[k]);
+ if (!ret)
+ ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
+
+ if (!ret)
+ ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+
if (!ret)
ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
#include <mach/rcar-gen2.h>
+/* DMA slave IDs */
+enum {
+ RCAR_DMA_SLAVE_INVALID,
+ AUDIO_DMAC_SLAVE_SSI0_TX,
+ AUDIO_DMAC_SLAVE_SSI0_RX,
+ AUDIO_DMAC_SLAVE_SSI1_TX,
+ AUDIO_DMAC_SLAVE_SSI1_RX,
+ AUDIO_DMAC_SLAVE_SSI2_TX,
+ AUDIO_DMAC_SLAVE_SSI2_RX,
+ AUDIO_DMAC_SLAVE_SSI3_TX,
+ AUDIO_DMAC_SLAVE_SSI3_RX,
+ AUDIO_DMAC_SLAVE_SSI4_TX,
+ AUDIO_DMAC_SLAVE_SSI4_RX,
+ AUDIO_DMAC_SLAVE_SSI5_TX,
+ AUDIO_DMAC_SLAVE_SSI5_RX,
+ AUDIO_DMAC_SLAVE_SSI6_TX,
+ AUDIO_DMAC_SLAVE_SSI6_RX,
+ AUDIO_DMAC_SLAVE_SSI7_TX,
+ AUDIO_DMAC_SLAVE_SSI7_RX,
+ AUDIO_DMAC_SLAVE_SSI8_TX,
+ AUDIO_DMAC_SLAVE_SSI8_RX,
+ AUDIO_DMAC_SLAVE_SSI9_TX,
+ AUDIO_DMAC_SLAVE_SSI9_RX,
+};
+
void r8a7790_add_standard_devices(void);
void r8a7790_add_dt_devices(void);
void r8a7790_clock_init(void);
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/irq-renesas-irqc.h>
#include <linux/serial_sci.h>
+#include <linux/sh_dma.h>
#include <linux/sh_timer.h>
#include <mach/common.h>
+#include <mach/dma-register.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
#include <asm/mach/arch.h>
+/* Audio-DMAC */
+#define AUDIO_DMAC_SLAVE(_id, _addr, t, r) \
+{ \
+ .slave_id = AUDIO_DMAC_SLAVE_## _id ##_TX, \
+ .addr = _addr + 0x8, \
+ .chcr = CHCR_TX(XMIT_SZ_32BIT), \
+ .mid_rid = t, \
+}, { \
+ .slave_id = AUDIO_DMAC_SLAVE_## _id ##_RX, \
+ .addr = _addr + 0xc, \
+ .chcr = CHCR_RX(XMIT_SZ_32BIT), \
+ .mid_rid = r, \
+}
+
+static const struct sh_dmae_slave_config r8a7790_audio_dmac_slaves[] = {
+ AUDIO_DMAC_SLAVE(SSI0, 0xec241000, 0x01, 0x02),
+ AUDIO_DMAC_SLAVE(SSI1, 0xec241040, 0x03, 0x04),
+ AUDIO_DMAC_SLAVE(SSI2, 0xec241080, 0x05, 0x06),
+ AUDIO_DMAC_SLAVE(SSI3, 0xec2410c0, 0x07, 0x08),
+ AUDIO_DMAC_SLAVE(SSI4, 0xec241100, 0x09, 0x0a),
+ AUDIO_DMAC_SLAVE(SSI5, 0xec241140, 0x0b, 0x0c),
+ AUDIO_DMAC_SLAVE(SSI6, 0xec241180, 0x0d, 0x0e),
+ AUDIO_DMAC_SLAVE(SSI7, 0xec2411c0, 0x0f, 0x10),
+ AUDIO_DMAC_SLAVE(SSI8, 0xec241200, 0x11, 0x12),
+ AUDIO_DMAC_SLAVE(SSI9, 0xec241240, 0x13, 0x14),
+};
+
+#define DMAE_CHANNEL(a, b) \
+{ \
+ .offset = (a) - 0x20, \
+ .dmars = (a) - 0x20 + 0x40, \
+ .chclr_bit = (b), \
+ .chclr_offset = 0x80 - 0x20, \
+}
+
+static const struct sh_dmae_channel r8a7790_audio_dmac_channels[] = {
+ DMAE_CHANNEL(0x8000, 0),
+ DMAE_CHANNEL(0x8080, 1),
+ DMAE_CHANNEL(0x8100, 2),
+ DMAE_CHANNEL(0x8180, 3),
+ DMAE_CHANNEL(0x8200, 4),
+ DMAE_CHANNEL(0x8280, 5),
+ DMAE_CHANNEL(0x8300, 6),
+ DMAE_CHANNEL(0x8380, 7),
+ DMAE_CHANNEL(0x8400, 8),
+ DMAE_CHANNEL(0x8480, 9),
+ DMAE_CHANNEL(0x8500, 10),
+ DMAE_CHANNEL(0x8580, 11),
+ DMAE_CHANNEL(0x8600, 12),
+};
+
+static struct sh_dmae_pdata r8a7790_audio_dmac_platform_data = {
+ .slave = r8a7790_audio_dmac_slaves,
+ .slave_num = ARRAY_SIZE(r8a7790_audio_dmac_slaves),
+ .channel = r8a7790_audio_dmac_channels,
+ .channel_num = ARRAY_SIZE(r8a7790_audio_dmac_channels),
+ .ts_low_shift = TS_LOW_SHIFT,
+ .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
+ .ts_high_shift = TS_HI_SHIFT,
+ .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
+ .ts_shift = dma_ts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chclr_present = 1,
+ .chclr_bitwise = 1,
+};
+
+static struct resource r8a7790_audio_dmac_resources[] = {
+ /* Channel registers and DMAOR for low */
+ DEFINE_RES_MEM(0xec700020, 0x8663 - 0x20),
+ DEFINE_RES_IRQ(gic_spi(346)),
+ DEFINE_RES_NAMED(gic_spi(320), 13, NULL, IORESOURCE_IRQ),
+
+ /* Channel registers and DMAOR for hi */
+ DEFINE_RES_MEM(0xec720020, 0x8663 - 0x20), /* hi */
+ DEFINE_RES_IRQ(gic_spi(347)),
+ DEFINE_RES_NAMED(gic_spi(333), 13, NULL, IORESOURCE_IRQ),
+};
+
+#define r8a7790_register_audio_dmac(id) \
+ platform_device_register_resndata( \
+ &platform_bus, "sh-dma-engine", id, \
+ &r8a7790_audio_dmac_resources[id * 3], 3, \
+ &r8a7790_audio_dmac_platform_data, \
+ sizeof(r8a7790_audio_dmac_platform_data))
+
static const struct resource pfc_resources[] __initconst = {
DEFINE_RES_MEM(0xe6060000, 0x250),
};
r8a7790_register_i2c(1);
r8a7790_register_i2c(2);
r8a7790_register_i2c(3);
+ r8a7790_register_audio_dmac(0);
+ r8a7790_register_audio_dmac(1);
}
#define __R8A7790_SCIF(scif_type, _scscr, index, baseaddr, irq) \
config ARCH_SOCFPGA
bool "Altera SOCFPGA family" if ARCH_MULTI_V7
- select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
select CACHE_L2X0
- select COMMON_CLK
- select CPU_V7
select DW_APB_TIMER_OF
- select GENERIC_CLOCKEVENTS
select GPIO_PL061 if GPIOLIB
select HAVE_ARM_SCU
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
select MFD_SYSCON
- select SPARSE_IRQ
- select USE_OF
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select CLKSRC_MMIO
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
if PLAT_SPEAR
depends on ARCH_MULTI_V7 || PLAT_SPEAR_SINGLE
select ARCH_HAS_CPUFREQ
select ARM_GIC
- select CPU_V7
select GPIO_SPEAR_SPICS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
- select USE_OF
help
Supports for ARM's SPEAR13XX family
depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
depends on !ARCH_SPEAR13XX
select ARM_VIC
- select CPU_ARM926T
select PINCTRL
- select USE_OF
help
Supports for ARM's SPEAR3XX family
depends on ARCH_MULTI_V5 || PLAT_SPEAR_SINGLE
depends on !ARCH_SPEAR13XX
select ARM_VIC
- select CPU_ARM926T
help
Supports for ARM's SPEAR6XX family
config MACH_SPEAR600
def_bool y
depends on ARCH_SPEAR6XX
- select USE_OF
help
Supports ST SPEAr600 boards configured via the device-treesource "arch/arm/mach-spear6xx/Kconfig"
menuconfig ARCH_STI
bool "STMicroelectronics Consumer Electronics SOCs with Device Trees" if ARCH_MULTI_V7
- select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
select ARM_GIC
select ARM_GLOBAL_TIMER
select PINCTRL
select PINCTRL_ST
select MFD_SYSCON
- select MIGHT_HAVE_CACHE_L2X0
- select HAVE_SMP
+ select ARCH_HAS_RESET_CONTROLLER
select HAVE_ARM_SCU if SMP
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
config SOC_STIH415
bool "STiH415 STMicroelectronics Consumer Electronics family"
default y
+ select STIH415_RESET
help
This enables support for STMicroelectronics Digital Consumer
Electronics family StiH415 parts, primarily targeted at set-top-box
config SOC_STIH416
bool "STiH416 STMicroelectronics Consumer Electronics family"
default y
+ select STIH416_RESET
help
This enables support for STMicroelectronics Digital Consumer
Electronics family StiH416 parts, primarily targeted at set-top-box
select ARM_GIC
select ARM_PSCI
select CLKSRC_MMIO
- select CLKSRC_OF
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
- select HAVE_SMP
select PINCTRL
select PINCTRL_SUNXI
select RESET_CONTROLLER
- select SPARSE_IRQ
select SUN4I_TIMER
select SUN5I_HSTIMER
select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
select ARM_GIC
select CLKSRC_MMIO
- select CLKSRC_OF
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
select MIGHT_HAVE_PCI
select PINCTRL
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
select SOC_BUS
- select SPARSE_IRQ
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB_PHY
select USB_ULPI_VIEWPORT if USB_PHY
- select USE_OF
help
This enables support for NVIDIA Tegra based systems.
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
- select ARM_PATCH_PHYS_VIRT
select ARM_VIC
select CLKSRC_MMIO
- select CLKSRC_OF
- select COMMON_CLK
select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
select HAVE_TCM
select PINCTRL
select PINCTRL_COH901
select PINCTRL_U300
- select SPARSE_IRQ
select MFD_SYSCON
- select USE_OF
help
Support for ST-Ericsson U300 series mobile platforms.
select ARM_GIC
select CACHE_L2X0
select CLKSRC_NOMADIK_MTU
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PINCTRL_ABX500
select PINCTRL_NOMADIK
config MACH_UX500_DT
bool "Generic U8500 support using device tree"
depends on MACH_MOP500
- select USE_OF
endmenu
np = of_find_matching_node_by_address(NULL, vic_of_match,
VERSATILE_VIC_BASE);
- __vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0, np);
+ __vic_init(VA_VIC_BASE, 0, IRQ_VIC_START, ~0, 0, np);
writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR);
select ARM_AMBA
select ARM_GIC
select ARM_TIMER_SP804
- select COMMON_CLK
select COMMON_CLK_VERSATILE
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select HAVE_PATA_PLATFORM
- select HAVE_SMP
select ICST
- select MIGHT_HAVE_CACHE_L2X0
select NO_IOPORT
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
+++ /dev/null
-config ARCH_VIRT
- bool "Dummy Virtual Machine" if ARCH_MULTI_V7
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
- select HAVE_ARM_ARCH_TIMER
- select ARM_PSCI
- select HAVE_SMP
- select CPU_V7
- select SPARSE_IRQ
- select USE_OF
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-obj-y := virt.o
+++ /dev/null
-/*
- * Dummy Virtual Machine - does what it says on the tin.
- *
- * Copyright (C) 2012 ARM Ltd
- * Authors: Will Deacon <will.deacon@arm.com>,
- * Marc Zyngier <marc.zyngier@arm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/smp.h>
-
-#include <asm/mach/arch.h>
-
-static void __init virt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
-static const char *virt_dt_match[] = {
- "linux,dummy-virt",
- "xen,xenvm",
- NULL
-};
-
-DT_MACHINE_START(VIRT, "Dummy Virtual Machine")
- .init_machine = virt_init,
- .dt_compat = virt_dt_match,
-MACHINE_END
select ARCH_HAS_CPUFREQ
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
- select CLKSRC_OF
- select GENERIC_CLOCKEVENTS
select VT8500_TIMER
select PINCTRL
help
bool "WonderMedia WM8750"
depends on ARCH_MULTI_V6
select ARCH_VT8500
- select CPU_V6
help
Support for WonderMedia WM8750 System-on-Chip.
bool "WonderMedia WM8850"
depends on ARCH_MULTI_V7
select ARCH_VT8500
- select CPU_V7
help
Support for WonderMedia WM8850 System-on-Chip.
bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
- select COMMON_CLK
- select CPU_V7
- select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ICST
- select MIGHT_HAVE_CACHE_L2X0
- select USE_OF
- select HAVE_SMP
- select SPARSE_IRQ
select CADENCE_TTC_TIMER
select ARM_GLOBAL_TIMER
help
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of.h>
+#include <linux/memblock.h>
#include <linux/irqchip.h>
#include <linux/irqchip/arm-gic.h>
void __iomem *zynq_scu_base;
+/**
+ * zynq_memory_init - Initialize special memory
+ *
+ * We need to stop things allocating the low memory as DMA can't work in
+ * the 1st 512K of memory.
+ */
+static void __init zynq_memory_init(void)
+{
+ if (!__pa(PAGE_OFFSET))
+ memblock_reserve(__pa(PAGE_OFFSET), __pa(swapper_pg_dir));
+}
+
static struct platform_device zynq_cpuidle_device = {
.name = "cpuidle-zynq",
};
.init_machine = zynq_init_machine,
.init_time = zynq_timer_init,
.dt_compat = zynq_dt_match,
+ .reserve = zynq_memory_init,
.restart = zynq_system_reset,
MACHINE_END
/*****************************************************************************
* Watchdog
****************************************************************************/
-static struct resource orion_wdt_resource =
- DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
+static struct resource orion_wdt_resource[] = {
+ DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
+ DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
+};
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
.id = -1,
- .num_resources = 1,
- .resource = &orion_wdt_resource,
+ .num_resources = ARRAY_SIZE(orion_wdt_resource),
+ .resource = orion_wdt_resource,
};
void __init orion_wdt_init(void)
select HAVE_GENERIC_DMA_COHERENT
select HAVE_HW_BREAKPOINT if PERF_EVENTS
select HAVE_MEMBLOCK
+ select HAVE_PATA_PLATFORM
select HAVE_PERF_EVENTS
select IRQ_DOMAIN
select MODULES_USE_ELF_RELA
-CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
+CONFIG_JUMP_LABEL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_XGENE=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
+CONFIG_CMA=y
CONFIG_CMDLINE="console=ttyAMA0"
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_COMPAT=y
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
-CONFIG_BLK_DEV=y
+CONFIG_DMA_CMA=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
CONFIG_NETDEVICES=y
-CONFIG_MII=y
CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_FB=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
" stxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
- : "Ir" (i)
- : "cc");
+ : "Ir" (i));
}
static inline int atomic_add_return(int i, atomic_t *v)
int result;
asm volatile("// atomic_add_return\n"
-"1: ldaxr %w0, %2\n"
+"1: ldxr %w0, %2\n"
" add %w0, %w0, %w3\n"
" stlxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
: "Ir" (i)
- : "cc", "memory");
+ : "memory");
+ smp_mb();
return result;
}
" stxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
- : "Ir" (i)
- : "cc");
+ : "Ir" (i));
}
static inline int atomic_sub_return(int i, atomic_t *v)
int result;
asm volatile("// atomic_sub_return\n"
-"1: ldaxr %w0, %2\n"
+"1: ldxr %w0, %2\n"
" sub %w0, %w0, %w3\n"
" stlxr %w1, %w0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
: "Ir" (i)
- : "cc", "memory");
+ : "memory");
+ smp_mb();
return result;
}
unsigned long tmp;
int oldval;
+ smp_mb();
+
asm volatile("// atomic_cmpxchg\n"
-"1: ldaxr %w1, %2\n"
+"1: ldxr %w1, %2\n"
" cmp %w1, %w3\n"
" b.ne 2f\n"
-" stlxr %w0, %w4, %2\n"
+" stxr %w0, %w4, %2\n"
" cbnz %w0, 1b\n"
"2:"
: "=&r" (tmp), "=&r" (oldval), "+Q" (ptr->counter)
: "Ir" (old), "r" (new)
- : "cc", "memory");
+ : "cc");
+ smp_mb();
return oldval;
}
" stxr %w1, %0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
- : "Ir" (i)
- : "cc");
+ : "Ir" (i));
}
static inline long atomic64_add_return(long i, atomic64_t *v)
unsigned long tmp;
asm volatile("// atomic64_add_return\n"
-"1: ldaxr %0, %2\n"
+"1: ldxr %0, %2\n"
" add %0, %0, %3\n"
" stlxr %w1, %0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
: "Ir" (i)
- : "cc", "memory");
+ : "memory");
+ smp_mb();
return result;
}
" stxr %w1, %0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
- : "Ir" (i)
- : "cc");
+ : "Ir" (i));
}
static inline long atomic64_sub_return(long i, atomic64_t *v)
unsigned long tmp;
asm volatile("// atomic64_sub_return\n"
-"1: ldaxr %0, %2\n"
+"1: ldxr %0, %2\n"
" sub %0, %0, %3\n"
" stlxr %w1, %0, %2\n"
" cbnz %w1, 1b"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
: "Ir" (i)
- : "cc", "memory");
+ : "memory");
+ smp_mb();
return result;
}
long oldval;
unsigned long res;
+ smp_mb();
+
asm volatile("// atomic64_cmpxchg\n"
-"1: ldaxr %1, %2\n"
+"1: ldxr %1, %2\n"
" cmp %1, %3\n"
" b.ne 2f\n"
-" stlxr %w0, %4, %2\n"
+" stxr %w0, %4, %2\n"
" cbnz %w0, 1b\n"
"2:"
: "=&r" (res), "=&r" (oldval), "+Q" (ptr->counter)
: "Ir" (old), "r" (new)
- : "cc", "memory");
+ : "cc");
+ smp_mb();
return oldval;
}
unsigned long tmp;
asm volatile("// atomic64_dec_if_positive\n"
-"1: ldaxr %0, %2\n"
+"1: ldxr %0, %2\n"
" subs %0, %0, #1\n"
" b.mi 2f\n"
" stlxr %w1, %0, %2\n"
" cbnz %w1, 1b\n"
+" dmb ish\n"
"2:"
: "=&r" (result), "=&r" (tmp), "+Q" (v->counter)
:
#define wfi() asm volatile("wfi" : : : "memory")
#define isb() asm volatile("isb" : : : "memory")
-#define dsb() asm volatile("dsb sy" : : : "memory")
+#define dsb(opt) asm volatile("dsb sy" : : : "memory")
#define mb() dsb()
#define rmb() asm volatile("dsb ld" : : : "memory")
static inline void __flush_icache_all(void)
{
asm("ic ialluis");
+ dsb();
}
#define flush_dcache_mmap_lock(mapping) \
switch (size) {
case 1:
asm volatile("// __xchg1\n"
- "1: ldaxrb %w0, %2\n"
+ "1: ldxrb %w0, %2\n"
" stlxrb %w1, %w3, %2\n"
" cbnz %w1, 1b\n"
: "=&r" (ret), "=&r" (tmp), "+Q" (*(u8 *)ptr)
: "r" (x)
- : "cc", "memory");
+ : "memory");
break;
case 2:
asm volatile("// __xchg2\n"
- "1: ldaxrh %w0, %2\n"
+ "1: ldxrh %w0, %2\n"
" stlxrh %w1, %w3, %2\n"
" cbnz %w1, 1b\n"
: "=&r" (ret), "=&r" (tmp), "+Q" (*(u16 *)ptr)
: "r" (x)
- : "cc", "memory");
+ : "memory");
break;
case 4:
asm volatile("// __xchg4\n"
- "1: ldaxr %w0, %2\n"
+ "1: ldxr %w0, %2\n"
" stlxr %w1, %w3, %2\n"
" cbnz %w1, 1b\n"
: "=&r" (ret), "=&r" (tmp), "+Q" (*(u32 *)ptr)
: "r" (x)
- : "cc", "memory");
+ : "memory");
break;
case 8:
asm volatile("// __xchg8\n"
- "1: ldaxr %0, %2\n"
+ "1: ldxr %0, %2\n"
" stlxr %w1, %3, %2\n"
" cbnz %w1, 1b\n"
: "=&r" (ret), "=&r" (tmp), "+Q" (*(u64 *)ptr)
: "r" (x)
- : "cc", "memory");
+ : "memory");
break;
default:
BUILD_BUG();
}
+ smp_mb();
return ret;
}
#define ESR_EL1_EC_SP_ALIGN (0x26)
#define ESR_EL1_EC_FP_EXC32 (0x28)
#define ESR_EL1_EC_FP_EXC64 (0x2C)
-#define ESR_EL1_EC_SERRROR (0x2F)
+#define ESR_EL1_EC_SERROR (0x2F)
#define ESR_EL1_EC_BREAKPT_EL0 (0x30)
#define ESR_EL1_EC_BREAKPT_EL1 (0x31)
#define ESR_EL1_EC_SOFTSTP_EL0 (0x32)
#define __futex_atomic_op(insn, ret, oldval, uaddr, tmp, oparg) \
asm volatile( \
-"1: ldaxr %w1, %2\n" \
+"1: ldxr %w1, %2\n" \
insn "\n" \
"2: stlxr %w3, %w0, %2\n" \
" cbnz %w3, 1b\n" \
+" dmb ish\n" \
"3:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
" .popsection\n" \
: "=&r" (ret), "=&r" (oldval), "+Q" (*uaddr), "=&r" (tmp) \
: "r" (oparg), "Ir" (-EFAULT) \
- : "cc", "memory")
+ : "memory")
static inline int
futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
return -EFAULT;
asm volatile("// futex_atomic_cmpxchg_inatomic\n"
-"1: ldaxr %w1, %2\n"
+"1: ldxr %w1, %2\n"
" sub %w3, %w1, %w4\n"
" cbnz %w3, 3f\n"
"2: stlxr %w3, %w5, %2\n"
" cbnz %w3, 1b\n"
+" dmb ish\n"
"3:\n"
" .pushsection .fixup,\"ax\"\n"
"4: mov %w0, %w6\n"
" .popsection\n"
: "+r" (ret), "=&r" (val), "+Q" (*uaddr), "=&r" (tmp)
: "r" (oldval), "r" (newval), "Ir" (-EFAULT)
- : "cc", "memory");
+ : "memory");
*uval = val;
return ret;
#define ESR_EL2_EC_SP_ALIGN (0x26)
#define ESR_EL2_EC_FP_EXC32 (0x28)
#define ESR_EL2_EC_FP_EXC64 (0x2C)
-#define ESR_EL2_EC_SERRROR (0x2F)
+#define ESR_EL2_EC_SERROR (0x2F)
#define ESR_EL2_EC_BREAKPT (0x30)
#define ESR_EL2_EC_BREAKPT_HYP (0x31)
#define ESR_EL2_EC_SOFTSTP (0x32)
" cbnz %w0, 2b\n"
: "=&r" (tmp), "+Q" (rw->lock)
: "r" (0x80000000)
- : "cc", "memory");
+ : "memory");
}
static inline int arch_write_trylock(arch_rwlock_t *rw)
"1:\n"
: "=&r" (tmp), "+Q" (rw->lock)
: "r" (0x80000000)
- : "cc", "memory");
+ : "memory");
return !tmp;
}
" cbnz %w1, 2b\n"
: "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
:
- : "cc", "memory");
+ : "memory");
}
static inline void arch_read_unlock(arch_rwlock_t *rw)
" cbnz %w1, 1b\n"
: "=&r" (tmp), "=&r" (tmp2), "+Q" (rw->lock)
:
- : "cc", "memory");
+ : "memory");
}
static inline int arch_read_trylock(arch_rwlock_t *rw)
"1:\n"
: "=&r" (tmp), "+r" (tmp2), "+Q" (rw->lock)
:
- : "cc", "memory");
+ : "memory");
return !tmp2;
}
__SYSCALL(375, sys_setns)
__SYSCALL(376, compat_sys_process_vm_readv)
__SYSCALL(377, compat_sys_process_vm_writev)
-__SYSCALL(378, sys_ni_syscall) /* 378 for kcmp */
+__SYSCALL(378, sys_kcmp)
+__SYSCALL(379, sys_finit_module)
+__SYSCALL(380, sys_sched_setattr)
+__SYSCALL(381, sys_sched_getattr)
#define __NR_compat_syscalls 379
#define KVM_REG_ARM_TIMER_CNT ARM64_SYS_REG(3, 3, 14, 3, 2)
#define KVM_REG_ARM_TIMER_CVAL ARM64_SYS_REG(3, 3, 14, 0, 2)
+/* Device Control API: ARM VGIC */
+#define KVM_DEV_ARM_VGIC_GRP_ADDR 0
+#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1
+#define KVM_DEV_ARM_VGIC_GRP_CPU_REGS 2
+#define KVM_DEV_ARM_VGIC_CPUID_SHIFT 32
+#define KVM_DEV_ARM_VGIC_CPUID_MASK (0xffULL << KVM_DEV_ARM_VGIC_CPUID_SHIFT)
+#define KVM_DEV_ARM_VGIC_OFFSET_SHIFT 0
+#define KVM_DEV_ARM_VGIC_OFFSET_MASK (0xffffffffULL << KVM_DEV_ARM_VGIC_OFFSET_SHIFT)
+
/* KVM_IRQ_LINE irq field index values */
#define KVM_ARM_IRQ_TYPE_SHIFT 24
#define KVM_ARM_IRQ_TYPE_MASK 0xff
.inst 0xe92d00f0 // push {r4, r5, r6, r7}
.inst 0xe1c040d0 // ldrd r4, r5, [r0]
.inst 0xe1c160d0 // ldrd r6, r7, [r1]
- .inst 0xe1b20e9f // 1: ldaexd r0, r1, [r2]
+ .inst 0xe1b20f9f // 1: ldrexd r0, r1, [r2]
.inst 0xe0303004 // eors r3, r0, r4
.inst 0x00313005 // eoreqs r3, r1, r5
.inst 0x01a23e96 // stlexdeq r3, r6, [r2]
.inst 0x03330001 // teqeq r3, #1
.inst 0x0afffff9 // beq 1b
+ .inst 0xf57ff05b // dmb ish
.inst 0xe2730000 // rsbs r0, r3, #0
.inst 0xe8bd00f0 // pop {r4, r5, r6, r7}
.inst 0xe12fff1e // bx lr
.align 5
__kuser_cmpxchg: // 0xffff0fc0
- .inst 0xe1923e9f // 1: ldaex r3, [r2]
+ .inst 0xe1923f9f // 1: ldrex r3, [r2]
.inst 0xe0533000 // subs r3, r3, r0
.inst 0x01823e91 // stlexeq r3, r1, [r2]
.inst 0x03330001 // teqeq r3, #1
.inst 0x0afffffa // beq 1b
+ .inst 0xf57ff05b // dmb ish
.inst 0xe2730000 // rsbs r0, r3, #0
.inst 0xe12fff1e // bx lr
vdso_data->use_syscall = use_syscall;
vdso_data->xtime_coarse_sec = xtime_coarse.tv_sec;
vdso_data->xtime_coarse_nsec = xtime_coarse.tv_nsec;
+ vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec;
+ vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec;
if (!use_syscall) {
vdso_data->cs_cycle_last = tk->clock->cycle_last;
vdso_data->xtime_clock_nsec = tk->xtime_nsec;
vdso_data->cs_mult = tk->mult;
vdso_data->cs_shift = tk->shift;
- vdso_data->wtm_clock_sec = tk->wall_to_monotonic.tv_sec;
- vdso_data->wtm_clock_nsec = tk->wall_to_monotonic.tv_nsec;
}
smp_wmb();
# Actual build commands
quiet_cmd_vdsold = VDSOL $@
- cmd_vdsold = $(CC) $(c_flags) -Wl,-T $^ -o $@
+ cmd_vdsold = $(CC) $(c_flags) -Wl,-n -Wl,-T $^ -o $@
quiet_cmd_vdsoas = VDSOA $@
cmd_vdsoas = $(CC) $(a_flags) -c -o $@ $<
bl __do_get_tspec
seqcnt_check w9, 1b
+ mov x30, x2
+
cmp w0, #CLOCK_MONOTONIC
b.ne 6f
ccmp w0, #CLOCK_MONOTONIC_COARSE, #0x4, ne
b.ne 8f
+ /* xtime_coarse_nsec is already right-shifted */
+ mov x12, #0
+
/* Get coarse timespec. */
adr vdso_data, _vdso_data
3: seqcnt_acquire
lsr x11, x11, x12
stp x10, x11, [x1, #TSPEC_TV_SEC]
mov x0, xzr
- ret x2
+ ret
7:
mov x30, x2
8: /* Syscall fallback. */
mov x2, #1
add x1, x1, x0, lsr #3 // Get word offset
lsl x4, x2, x3 // Create mask
-1: ldaxr x2, [x1]
+1: ldxr x2, [x1]
lsr x0, x2, x3 // Save old value of bit
\instr x2, x2, x4 // toggle bit
stlxr w5, x2, [x1]
cbnz w5, 1b
+ dmb ish
and x0, x0, #1
3: ret
ENDPROC(\name )
if (IS_ENABLED(CONFIG_DMA_CMA)) {
struct page *page;
+ size = PAGE_ALIGN(size);
page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT,
get_order(size));
if (!page)
do {
next = pmd_addr_end(addr, end);
/* try section mapping first */
- if (((addr | next | phys) & ~SECTION_MASK) == 0)
+ if (((addr | next | phys) & ~SECTION_MASK) == 0) {
+ pmd_t old_pmd =*pmd;
set_pmd(pmd, __pmd(phys | prot_sect_kernel));
- else
+ /*
+ * Check for previous table entries created during
+ * boot (__create_page_tables) and flush them.
+ */
+ if (!pmd_none(old_pmd))
+ flush_tlb_all();
+ } else {
alloc_init_pte(pmd, addr, next, __phys_to_pfn(phys));
+ }
phys += next - addr;
} while (pmd++, addr = next, addr != end);
}
pgd_t *pgd_alloc(struct mm_struct *mm)
{
- pgd_t *new_pgd;
-
if (PGD_SIZE == PAGE_SIZE)
- new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
+ return (pgd_t *)get_zeroed_page(GFP_KERNEL);
else
- new_pgd = kzalloc(PGD_SIZE, GFP_KERNEL);
-
- if (!new_pgd)
- return NULL;
-
- return new_pgd;
+ return kzalloc(PGD_SIZE, GFP_KERNEL);
}
void pgd_free(struct mm_struct *mm, pgd_t *pgd)
KBUILD_DEFCONFIG := atstk1002_defconfig
-KBUILD_CFLAGS += -pipe -fno-builtin -mno-pic
+KBUILD_CFLAGS += -pipe -fno-builtin -mno-pic -D__linux__
KBUILD_AFLAGS += -mrelax -mno-pic
KBUILD_CFLAGS_MODULE += -mno-relax
LDFLAGS_vmlinux += --relax
#define FRAM_VERSION "1.0"
#include <linux/miscdevice.h>
+#include <linux/module.h>
#include <linux/proc_fs.h>
#include <linux/mm.h>
#include <linux/io.h>
generic-y += sections.h
generic-y += topology.h
generic-y += trace_clock.h
+generic-y += vga.h
generic-y += xor.h
generic-y += hash.h
#define iounmap(addr) \
__iounmap(addr)
+#define ioremap_wc ioremap_nocache
+
#define cached(addr) P1SEGADDR(addr)
#define uncached(addr) P2SEGADDR(addr)
-#define NR_syscalls 312 /* length of syscall table */
+#define NR_syscalls 314 /* length of syscall table */
/*
* The following defines stop scripts/checksyscalls.sh from complaining about
#define __NR_process_vm_writev 1333
#define __NR_accept4 1334
#define __NR_finit_module 1335
+#define __NR_sched_setattr 1336
+#define __NR_sched_getattr 1337
#endif /* _UAPI_ASM_IA64_UNISTD_H */
data8 sys_process_vm_writev
data8 sys_accept4
data8 sys_finit_module // 1335
+ data8 sys_sched_setattr
+ data8 sys_sched_getattr
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
#ifndef _ASM_MICROBLAZE_DELAY_H
#define _ASM_MICROBLAZE_DELAY_H
+#include <linux/param.h>
+
extern inline void __delay(unsigned long loops)
{
asm volatile ("# __delay \n\t" \
{
return le32_to_cpu(*(volatile unsigned int __force *)addr);
}
+#define readq readq
+static inline u64 readq(const volatile void __iomem *addr)
+{
+ return le64_to_cpu(__raw_readq(addr));
+}
static inline void writeb(unsigned char v, volatile void __iomem *addr)
{
*(volatile unsigned char __force *)addr = v;
{
*(volatile unsigned int __force *)addr = cpu_to_le32(v);
}
+#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
/* ioread and iowrite variants. thease are for now same as __raw_
* variants of accessors. we might check for endianess in the feature
mts rmsr, r0
/* Disable stack protection from bootloader */
mts rslr, r0
- addi r8, r0, 0xFFFFFFF
+ addi r8, r0, 0xFFFFFFFF
mts rshr, r8
/*
* According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc'
s0 = AU1100_GPIO1_INT;
s1 = AU1100_GPIO4_INT;
+ gpio_request(19, "sd0_cd");
+ gpio_request(20, "sd1_cd");
gpio_direction_input(19); /* sd0 cd# */
gpio_direction_input(20); /* sd1 cd# */
- gpio_direction_input(21); /* touch pendown# */
- gpio_direction_input(207); /* SPI MISO */
- gpio_direction_output(208, 0); /* SPI MOSI */
- gpio_direction_output(209, 1); /* SPI SCK */
- gpio_direction_output(210, 1); /* SPI CS# */
/* spi_gpio on SSI0 pins */
pfc = __raw_readl((void __iomem *)SYS_PINFUNC);
default:
BUG();
}
+
+ return SIGFPE;
}
#define __disable_fpu() \
#define __NR_process_vm_writev (__NR_Linux + 346)
#define __NR_kcmp (__NR_Linux + 347)
#define __NR_finit_module (__NR_Linux + 348)
+#define __NR_sched_setattr (__NR_Linux + 349)
+#define __NR_sched_getattr (__NR_Linux + 350)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 348
+#define __NR_Linux_syscalls 350
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 348
+#define __NR_O32_Linux_syscalls 350
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_kcmp (__NR_Linux + 306)
#define __NR_finit_module (__NR_Linux + 307)
#define __NR_getdents64 (__NR_Linux + 308)
+#define __NR_sched_setattr (__NR_Linux + 309)
+#define __NR_sched_getattr (__NR_Linux + 310)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 308
+#define __NR_Linux_syscalls 310
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 308
+#define __NR_64_Linux_syscalls 310
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_process_vm_writev (__NR_Linux + 310)
#define __NR_kcmp (__NR_Linux + 311)
#define __NR_finit_module (__NR_Linux + 312)
+#define __NR_sched_setattr (__NR_Linux + 313)
+#define __NR_sched_getattr (__NR_Linux + 314)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 312
+#define __NR_Linux_syscalls 314
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 312
+#define __NR_N32_Linux_syscalls 314
#endif /* _UAPI_ASM_UNISTD_H */
PTR sys_process_vm_writev
PTR sys_kcmp
PTR sys_finit_module
+ PTR sys_sched_setattr
+ PTR sys_sched_getattr /* 4350 */
PTR sys_kcmp
PTR sys_finit_module
PTR sys_getdents64
+ PTR sys_sched_setattr
+ PTR sys_sched_getattr /* 5310 */
.size sys_call_table,.-sys_call_table
PTR compat_sys_process_vm_writev /* 6310 */
PTR sys_kcmp
PTR sys_finit_module
+ PTR sys_sched_setattr
+ PTR sys_sched_getattr
.size sysn32_call_table,.-sysn32_call_table
PTR compat_sys_process_vm_writev
PTR sys_kcmp
PTR sys_finit_module
+ PTR sys_sched_setattr
+ PTR sys_sched_getattr /* 4350 */
.size sys32_call_table,.-sys32_call_table
int hpux_execve(struct pt_regs *regs)
{
- int error;
- struct filename *filename;
-
- filename = getname((const char __user *) regs->gr[26]);
- error = PTR_ERR(filename);
- if (IS_ERR(filename))
- goto out;
-
- error = do_execve(filename->name,
+ return do_execve(getname((const char __user *) regs->gr[26]),
(const char __user *const __user *) regs->gr[25],
(const char __user *const __user *) regs->gr[24]);
-
- putname(filename);
-
-out:
- return error;
}
struct hpux_dirent {
}
extern int dma_set_mask(struct device *dev, u64 dma_mask);
+extern int __dma_set_mask(struct device *dev, u64 dma_mask);
#define dma_alloc_coherent(d,s,h,f) dma_alloc_attrs(d,s,h,f,NULL)
};
extern struct eeh_ops *eeh_ops;
-extern int eeh_subsystem_enabled;
+extern bool eeh_subsystem_enabled;
extern raw_spinlock_t confirm_error_lock;
extern int eeh_probe_mode;
+static inline bool eeh_enabled(void)
+{
+ return eeh_subsystem_enabled;
+}
+
+static inline void eeh_set_enable(bool mode)
+{
+ eeh_subsystem_enabled = mode;
+}
+
#define EEH_PROBE_MODE_DEV (1<<0) /* From PCI device */
#define EEH_PROBE_MODE_DEVTREE (1<<1) /* From device tree */
* If this macro yields TRUE, the caller relays to eeh_check_failure()
* which does further tests out of line.
*/
-#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_subsystem_enabled)
+#define EEH_POSSIBLE_ERROR(val, type) ((val) == (type)~0 && eeh_enabled())
/*
* Reads from a device which has been isolated by EEH will return
#else /* !CONFIG_EEH */
+static inline bool eeh_enabled(void)
+{
+ return false;
+}
+
+static inline void eeh_set_enable(bool mode) { }
+
static inline int eeh_init(void)
{
return 0;
unsigned long addr, pte_t *ptep)
{
#ifdef CONFIG_PPC64
- return __pte(pte_update(mm, addr, ptep, ~0UL, 1));
+ return __pte(pte_update(mm, addr, ptep, ~0UL, 0, 1));
#else
return __pte(pte_update(ptep, ~0UL, 0));
#endif
#ifdef CONFIG_IOMMU_API
struct iommu_group *it_group;
#endif
+ void (*set_bypass)(struct iommu_table *tbl, bool enable);
};
/* Pure 2^n version of get_order */
static inline unsigned long pte_update(struct mm_struct *mm,
unsigned long addr,
pte_t *ptep, unsigned long clr,
+ unsigned long set,
int huge)
{
#ifdef PTE_ATOMIC_UPDATES
andi. %1,%0,%6\n\
bne- 1b \n\
andc %1,%0,%4 \n\
+ or %1,%1,%7\n\
stdcx. %1,0,%3 \n\
bne- 1b"
: "=&r" (old), "=&r" (tmp), "=m" (*ptep)
- : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY)
+ : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY), "r" (set)
: "cc" );
#else
unsigned long old = pte_val(*ptep);
- *ptep = __pte(old & ~clr);
+ *ptep = __pte((old & ~clr) | set);
#endif
/* huge pages use the old page table lock */
if (!huge)
{
unsigned long old;
- if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
+ if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
return 0;
- old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0);
+ old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0);
return (old & _PAGE_ACCESSED) != 0;
}
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
if ((pte_val(*ptep) & _PAGE_RW) == 0)
return;
- pte_update(mm, addr, ptep, _PAGE_RW, 0);
+ pte_update(mm, addr, ptep, _PAGE_RW, 0, 0);
}
static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
if ((pte_val(*ptep) & _PAGE_RW) == 0)
return;
- pte_update(mm, addr, ptep, _PAGE_RW, 1);
+ pte_update(mm, addr, ptep, _PAGE_RW, 0, 1);
}
/*
static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
- unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0);
+ unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0, 0);
return __pte(old);
}
static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
pte_t * ptep)
{
- pte_update(mm, addr, ptep, ~0UL, 0);
+ pte_update(mm, addr, ptep, ~0UL, 0, 0);
}
extern unsigned long pmd_hugepage_update(struct mm_struct *mm,
unsigned long addr,
- pmd_t *pmdp, unsigned long clr);
+ pmd_t *pmdp,
+ unsigned long clr,
+ unsigned long set);
static inline int __pmdp_test_and_clear_young(struct mm_struct *mm,
unsigned long addr, pmd_t *pmdp)
if ((pmd_val(*pmdp) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
return 0;
- old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED);
+ old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED, 0);
return ((old & _PAGE_ACCESSED) != 0);
}
if ((pmd_val(*pmdp) & _PAGE_RW) == 0)
return;
- pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW);
+ pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW, 0);
}
#define __HAVE_ARCH_PMDP_SPLITTING_FLUSH
return pte;
}
+#define ptep_set_numa ptep_set_numa
+static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ if ((pte_val(*ptep) & _PAGE_PRESENT) == 0)
+ VM_BUG_ON(1);
+
+ pte_update(mm, addr, ptep, _PAGE_PRESENT, _PAGE_NUMA, 0);
+ return;
+}
+
#define pmd_numa pmd_numa
static inline int pmd_numa(pmd_t pmd)
{
return pte_numa(pmd_pte(pmd));
}
+#define pmdp_set_numa pmdp_set_numa
+static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
+ pmd_t *pmdp)
+{
+ if ((pmd_val(*pmdp) & _PAGE_PRESENT) == 0)
+ VM_BUG_ON(1);
+
+ pmd_hugepage_update(mm, addr, pmdp, _PAGE_PRESENT, _PAGE_NUMA);
+ return;
+}
+
#define pmd_mknonnuma pmd_mknonnuma
static inline pmd_t pmd_mknonnuma(pmd_t pmd)
{
#ifdef __powerpc64__
+extern char __start_interrupts[];
extern char __end_interrupts[];
extern char __prom_init_toc_start[];
return 0;
}
+static inline int overlaps_interrupt_vector_text(unsigned long start,
+ unsigned long end)
+{
+ unsigned long real_start, real_end;
+ real_start = __start_interrupts - _stext;
+ real_end = __end_interrupts - _stext;
+
+ return start < (unsigned long)__va(real_end) &&
+ (unsigned long)__va(real_start) < end;
+}
+
static inline int overlaps_kernel_text(unsigned long start, unsigned long end)
{
return start < (unsigned long)__init_end &&
#ifdef __KERNEL__
/* Default link addresses for the vDSOs */
-#define VDSO32_LBASE 0x100000
-#define VDSO64_LBASE 0x100000
+#define VDSO32_LBASE 0x0
+#define VDSO64_LBASE 0x0
/* Default map addresses for 32bit vDSO */
-#define VDSO32_MBASE VDSO32_LBASE
+#define VDSO32_MBASE 0x100000
#define VDSO_VERSION_STRING LINUX_2.6.15
#define PREALLOC_DMA_DEBUG_ENTRIES (1 << 16)
-int dma_set_mask(struct device *dev, u64 dma_mask)
+int __dma_set_mask(struct device *dev, u64 dma_mask)
{
struct dma_map_ops *dma_ops = get_dma_ops(dev);
- if (ppc_md.dma_set_mask)
- return ppc_md.dma_set_mask(dev, dma_mask);
if ((dma_ops != NULL) && (dma_ops->set_dma_mask != NULL))
return dma_ops->set_dma_mask(dev, dma_mask);
if (!dev->dma_mask || !dma_supported(dev, dma_mask))
*dev->dma_mask = dma_mask;
return 0;
}
+int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ if (ppc_md.dma_set_mask)
+ return ppc_md.dma_set_mask(dev, dma_mask);
+ return __dma_set_mask(dev, dma_mask);
+}
EXPORT_SYMBOL(dma_set_mask);
u64 dma_get_required_mask(struct device *dev)
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <linux/rbtree.h>
+#include <linux/reboot.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
#include <linux/export.h>
/* Platform dependent EEH operations */
struct eeh_ops *eeh_ops = NULL;
-int eeh_subsystem_enabled;
+bool eeh_subsystem_enabled = false;
EXPORT_SYMBOL(eeh_subsystem_enabled);
/*
eeh_stats.total_mmio_ffs++;
- if (!eeh_subsystem_enabled)
+ if (!eeh_enabled())
return 0;
if (!edev) {
return -EEXIST;
}
+static int eeh_reboot_notifier(struct notifier_block *nb,
+ unsigned long action, void *unused)
+{
+ eeh_set_enable(false);
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block eeh_reboot_nb = {
+ .notifier_call = eeh_reboot_notifier,
+};
+
/**
* eeh_init - EEH initialization
*
if (machine_is(powernv) && cnt++ <= 0)
return ret;
+ /* Register reboot notifier */
+ ret = register_reboot_notifier(&eeh_reboot_nb);
+ if (ret) {
+ pr_warn("%s: Failed to register notifier (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+
/* call platform initialization function */
if (!eeh_ops) {
pr_warning("%s: Platform EEH operation not found\n",
return ret;
}
- if (eeh_subsystem_enabled)
+ if (eeh_enabled())
pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
else
pr_warning("EEH: No capable adapters found\n");
struct device_node *dn;
struct eeh_dev *edev;
- if (!dev || !eeh_subsystem_enabled)
+ if (!dev || !eeh_enabled())
return;
pr_debug("EEH: Adding device %s\n", pci_name(dev));
{
struct eeh_dev *edev;
- if (!dev || !eeh_subsystem_enabled)
+ if (!dev || !eeh_enabled())
return;
edev = pci_dev_to_eeh_dev(dev);
static int proc_eeh_show(struct seq_file *m, void *v)
{
- if (0 == eeh_subsystem_enabled) {
+ if (!eeh_enabled()) {
seq_printf(m, "EEH Subsystem is globally disabled\n");
seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs);
} else {
*/
if (!dev || (dev->hdr_type & PCI_HEADER_TYPE_BRIDGE))
return NULL;
+
driver = eeh_pcid_get(dev);
- if (driver && driver->err_handler)
- return NULL;
+ if (driver) {
+ eeh_pcid_put(dev);
+ if (driver->err_handler)
+ return NULL;
+ }
/* Remove it from PCI subsystem */
pr_debug("EEH: Removing %s without EEH sensitive driver\n",
memset(tbl->it_map, 0xff, sz);
iommu_clear_tces_and_put_pages(tbl, tbl->it_offset, tbl->it_size);
+ /*
+ * Disable iommu bypass, otherwise the user can DMA to all of
+ * our physical memory via the bypass window instead of just
+ * the pages that has been explicitly mapped into the iommu
+ */
+ if (tbl->set_bypass)
+ tbl->set_bypass(tbl, false);
+
return 0;
}
EXPORT_SYMBOL_GPL(iommu_take_ownership);
/* Restore bit#0 set by iommu_init_table() */
if (tbl->it_offset == 0)
set_bit(0, tbl->it_map);
+
+ /* The kernel owns the device now, we can restore the iommu bypass */
+ if (tbl->set_bypass)
+ tbl->set_bypass(tbl, true);
}
EXPORT_SYMBOL_GPL(iommu_release_ownership);
#ifdef CONFIG_PPC64
cpu_nr = i;
#else
+#ifdef CONFIG_SMP
cpu_nr = get_hard_smp_processor_id(i);
+#else
+ cpu_nr = 0;
#endif
+#endif
+
memset((void *)critirq_ctx[cpu_nr], 0, THREAD_SIZE);
tp = critirq_ctx[cpu_nr];
tp->cpu = cpu_nr;
/* Values we need to export to the second kernel via the device tree. */
static phys_addr_t kernel_end;
+static phys_addr_t crashk_base;
static phys_addr_t crashk_size;
+static unsigned long long mem_limit;
static struct property kernel_end_prop = {
.name = "linux,kernel-end",
static struct property crashk_base_prop = {
.name = "linux,crashkernel-base",
.length = sizeof(phys_addr_t),
- .value = &crashk_res.start,
+ .value = &crashk_base
};
static struct property crashk_size_prop = {
static struct property memory_limit_prop = {
.name = "linux,memory-limit",
.length = sizeof(unsigned long long),
- .value = &memory_limit,
+ .value = &mem_limit,
};
+#define cpu_to_be_ulong __PASTE(cpu_to_be, BITS_PER_LONG)
+
static void __init export_crashk_values(struct device_node *node)
{
struct property *prop;
of_remove_property(node, prop);
if (crashk_res.start != 0) {
+ crashk_base = cpu_to_be_ulong(crashk_res.start),
of_add_property(node, &crashk_base_prop);
- crashk_size = resource_size(&crashk_res);
+ crashk_size = cpu_to_be_ulong(resource_size(&crashk_res));
of_add_property(node, &crashk_size_prop);
}
* memory_limit is required by the kexec-tools to limit the
* crash regions to the actual memory used.
*/
+ mem_limit = cpu_to_be_ulong(memory_limit);
of_update_property(node, &memory_limit_prop);
}
of_remove_property(node, prop);
/* information needed by userspace when using default_machine_kexec */
- kernel_end = __pa(_end);
+ kernel_end = cpu_to_be_ulong(__pa(_end));
of_add_property(node, &kernel_end_prop);
export_crashk_values(node);
/* Values we need to export to the second kernel via the device tree. */
static unsigned long htab_base;
+static unsigned long htab_size;
static struct property htab_base_prop = {
.name = "linux,htab-base",
static struct property htab_size_prop = {
.name = "linux,htab-size",
.length = sizeof(unsigned long),
- .value = &htab_size_bytes,
+ .value = &htab_size,
};
static int __init export_htab_values(void)
if (prop)
of_remove_property(node, prop);
- htab_base = __pa(htab_address);
+ htab_base = cpu_to_be64(__pa(htab_address));
of_add_property(node, &htab_base_prop);
+ htab_size = cpu_to_be64(htab_size_bytes);
of_add_property(node, &htab_size_prop);
of_node_put(node);
mtlr r0
blr
+/*
+ * void call_do_irq(struct pt_regs *regs, struct thread_info *irqtp);
+ */
_GLOBAL(call_do_irq)
mflr r0
stw r0,4(r1)
lwz r10,THREAD+KSP_LIMIT(r2)
- addi r11,r3,THREAD_INFO_GAP
+ addi r11,r4,THREAD_INFO_GAP
stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
mr r1,r4
stw r10,8(r1)
* R_PPC64_RELATIVE ones.
*/
mtctr r8
-5: lwz r0,12(9) /* ELF64_R_TYPE(reloc->r_info) */
- cmpwi r0,R_PPC64_RELATIVE
+5: ld r0,8(9) /* ELF64_R_TYPE(reloc->r_info) */
+ cmpdi r0,R_PPC64_RELATIVE
bne 6f
ld r6,0(r9) /* reloc->r_offset */
ld r0,16(r9) /* reloc->r_addend */
/* interrupt stacks must be in lowmem, we get that for free on ppc32
* as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
for_each_possible_cpu(i) {
+#ifdef CONFIG_SMP
hw_cpu = get_hard_smp_processor_id(i);
+#else
+ hw_cpu = 0;
+#endif
+
critirq_ctx[hw_cpu] = (struct thread_info *)
__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
#ifdef CONFIG_BOOKE
.globl vdso32_start, vdso32_end
.balign PAGE_SIZE
vdso32_start:
- .incbin "arch/powerpc/kernel/vdso32/vdso32.so"
+ .incbin "arch/powerpc/kernel/vdso32/vdso32.so.dbg"
.balign PAGE_SIZE
vdso32_end:
.globl vdso64_start, vdso64_end
.balign PAGE_SIZE
vdso64_start:
- .incbin "arch/powerpc/kernel/vdso64/vdso64.so"
+ .incbin "arch/powerpc/kernel/vdso64/vdso64.so.dbg"
.balign PAGE_SIZE
vdso64_end:
if (overlaps_kernel_text(vaddr, vaddr + step))
tprot &= ~HPTE_R_N;
+ /*
+ * If relocatable, check if it overlaps interrupt vectors that
+ * are copied down to real 0. For relocatable kernel
+ * (e.g. kdump case) we copy interrupt vectors down to real
+ * address 0. Mark that region as executable. This is
+ * because on p8 system with relocation on exception feature
+ * enabled, exceptions are raised with MMU (IR=DR=1) ON. Hence
+ * in order to execute the interrupt handlers in virtual
+ * mode the vector region need to be marked as executable.
+ */
+ if ((PHYSICAL_START > MEMORY_START) &&
+ overlaps_interrupt_vector_text(vaddr, vaddr + step))
+ tprot &= ~HPTE_R_N;
+
hash = hpt_hash(vpn, shift, ssize);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
}
unsigned long pmd_hugepage_update(struct mm_struct *mm, unsigned long addr,
- pmd_t *pmdp, unsigned long clr)
+ pmd_t *pmdp, unsigned long clr,
+ unsigned long set)
{
unsigned long old, tmp;
andi. %1,%0,%6\n\
bne- 1b \n\
andc %1,%0,%4 \n\
+ or %1,%1,%7\n\
stdcx. %1,0,%3 \n\
bne- 1b"
: "=&r" (old), "=&r" (tmp), "=m" (*pmdp)
- : "r" (pmdp), "r" (clr), "m" (*pmdp), "i" (_PAGE_BUSY)
+ : "r" (pmdp), "r" (clr), "m" (*pmdp), "i" (_PAGE_BUSY), "r" (set)
: "cc" );
#else
old = pmd_val(*pmdp);
- *pmdp = __pmd(old & ~clr);
+ *pmdp = __pmd((old & ~clr) | set);
#endif
if (old & _PAGE_HASHPTE)
hpte_do_hugepage_flush(mm, addr, pmdp);
void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
pmd_t *pmdp)
{
- pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT);
+ pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT, 0);
}
/*
unsigned long old;
pgtable_t *pgtable_slot;
- old = pmd_hugepage_update(mm, addr, pmdp, ~0UL);
+ old = pmd_hugepage_update(mm, addr, pmdp, ~0UL, 0);
old_pmd = __pmd(old);
/*
* We have pmd == none and we are holding page_table_lock.
pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
arch_enter_lazy_mmu_mode();
for (; npages > 0; --npages) {
- pte_update(mm, addr, pte, 0, 0);
+ pte_update(mm, addr, pte, 0, 0, 0);
addr += PAGE_SIZE;
++pte;
}
mmcr0 = ebb_switch_in(ebb, cpuhw->mmcr[0]);
mb();
+ if (cpuhw->bhrb_users)
+ ppmu->config_bhrb(cpuhw->bhrb_filter);
+
write_mmcr0(cpuhw, mmcr0);
/*
}
out:
- if (cpuhw->bhrb_users)
- ppmu->config_bhrb(cpuhw->bhrb_filter);
local_irq_restore(flags);
}
#define PM_BRU_FIN 0x10068
#define PM_BR_MPRED_CMPL 0x400f6
+/* All L1 D cache load references counted at finish, gated by reject */
+#define PM_LD_REF_L1 0x100ee
+/* Load Missed L1 */
+#define PM_LD_MISS_L1 0x3e054
+/* Store Missed L1 */
+#define PM_ST_MISS_L1 0x300f0
+/* L1 cache data prefetches */
+#define PM_L1_PREF 0x0d8b8
+/* Instruction fetches from L1 */
+#define PM_INST_FROM_L1 0x04080
+/* Demand iCache Miss */
+#define PM_L1_ICACHE_MISS 0x200fd
+/* Instruction Demand sectors wriittent into IL1 */
+#define PM_L1_DEMAND_WRITE 0x0408c
+/* Instruction prefetch written into IL1 */
+#define PM_IC_PREF_WRITE 0x0408e
+/* The data cache was reloaded from local core's L3 due to a demand load */
+#define PM_DATA_FROM_L3 0x4c042
+/* Demand LD - L3 Miss (not L2 hit and not L3 hit) */
+#define PM_DATA_FROM_L3MISS 0x300fe
+/* All successful D-side store dispatches for this thread */
+#define PM_L2_ST 0x17080
+/* All successful D-side store dispatches for this thread that were L2 Miss */
+#define PM_L2_ST_MISS 0x17082
+/* Total HW L3 prefetches(Load+store) */
+#define PM_L3_PREF_ALL 0x4e052
+/* Data PTEG reload */
+#define PM_DTLB_MISS 0x300fc
+/* ITLB Reloaded */
+#define PM_ITLB_MISS 0x400fc
+
/*
* Raw event encoding for POWER8:
[PERF_COUNT_HW_INSTRUCTIONS] = PM_INST_CMPL,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = PM_BRU_FIN,
[PERF_COUNT_HW_BRANCH_MISSES] = PM_BR_MPRED_CMPL,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = PM_LD_REF_L1,
+ [PERF_COUNT_HW_CACHE_MISSES] = PM_LD_MISS_L1,
};
static u64 power8_bhrb_filter_map(u64 branch_sample_type)
mtspr(SPRN_MMCRA, (mfspr(SPRN_MMCRA) | pmu_bhrb_filter));
}
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+/*
+ * Table of generalized cache-related events.
+ * 0 means not supported, -1 means nonsensical, other values
+ * are event codes.
+ */
+static int power8_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+ [ C(L1D) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_LD_REF_L1,
+ [ C(RESULT_MISS) ] = PM_LD_MISS_L1,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = PM_ST_MISS_L1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L1_PREF,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(L1I) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_INST_FROM_L1,
+ [ C(RESULT_MISS) ] = PM_L1_ICACHE_MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L1_DEMAND_WRITE,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = PM_IC_PREF_WRITE,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(LL) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_DATA_FROM_L3,
+ [ C(RESULT_MISS) ] = PM_DATA_FROM_L3MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L2_ST,
+ [ C(RESULT_MISS) ] = PM_L2_ST_MISS,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = PM_L3_PREF_ALL,
+ [ C(RESULT_MISS) ] = 0,
+ },
+ },
+ [ C(DTLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = PM_DTLB_MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(ITLB) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = 0,
+ [ C(RESULT_MISS) ] = PM_ITLB_MISS,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(BPU) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = PM_BRU_FIN,
+ [ C(RESULT_MISS) ] = PM_BR_MPRED_CMPL,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+ [ C(NODE) ] = {
+ [ C(OP_READ) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = -1,
+ [ C(RESULT_MISS) ] = -1,
+ },
+ },
+};
+
+#undef C
+
static struct power_pmu power8_pmu = {
.name = "POWER8",
.n_counter = 6,
.flags = PPMU_HAS_SSLOT | PPMU_HAS_SIER | PPMU_BHRB | PPMU_EBB,
.n_generic = ARRAY_SIZE(power8_generic_events),
.generic_events = power8_generic_events,
+ .cache_events = &power8_cache_events,
.attr_groups = power8_pmu_attr_groups,
.bhrb_nr = 32,
};
/* We simply send special EEH event */
if ((changed_evts & OPAL_EVENT_PCI_ERROR) &&
- (events & OPAL_EVENT_PCI_ERROR))
+ (events & OPAL_EVENT_PCI_ERROR) &&
+ eeh_enabled())
eeh_send_failure_event(NULL);
return 0;
static int ioda_eeh_reset(struct eeh_pe *pe, int option)
{
struct pci_controller *hose = pe->phb;
- struct eeh_dev *edev;
- struct pci_dev *dev;
+ struct pci_bus *bus;
int ret;
/*
if (pe->type & EEH_PE_PHB) {
ret = ioda_eeh_phb_reset(hose, option);
} else {
- if (pe->type & EEH_PE_DEVICE) {
- /*
- * If it's device PE, we didn't refer to the parent
- * PCI bus yet. So we have to figure it out indirectly.
- */
- edev = list_first_entry(&pe->edevs,
- struct eeh_dev, list);
- dev = eeh_dev_to_pci_dev(edev);
- dev = dev->bus->self;
- } else {
- /*
- * If it's bus PE, the parent PCI bus is already there
- * and just pick it up.
- */
- dev = pe->bus->self;
- }
-
- /*
- * Do reset based on the fact that the direct upstream bridge
- * is root bridge (port) or not.
- */
- if (dev->bus->number == 0)
+ bus = eeh_pe_bus_get(pe);
+ if (pci_is_root_bus(bus))
ret = ioda_eeh_root_reset(hose, option);
else
- ret = ioda_eeh_bridge_reset(hose, dev, option);
+ ret = ioda_eeh_bridge_reset(hose, bus->self, option);
}
return ret;
* Enable EEH explicitly so that we will do EEH check
* while accessing I/O stuff
*/
- eeh_subsystem_enabled = 1;
+ eeh_set_enable(true);
/* Save memory bars */
eeh_save_bars(edev);
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/msi.h>
+#include <linux/memblock.h>
#include <asm/sections.h>
#include <asm/io.h>
return;
pe = &phb->ioda.pe_array[pdn->pe_number];
+ WARN_ON(get_dma_ops(&pdev->dev) != &dma_iommu_ops);
set_iommu_table_base_and_group(&pdev->dev, &pe->tce32_table);
}
+static int pnv_pci_ioda_dma_set_mask(struct pnv_phb *phb,
+ struct pci_dev *pdev, u64 dma_mask)
+{
+ struct pci_dn *pdn = pci_get_pdn(pdev);
+ struct pnv_ioda_pe *pe;
+ uint64_t top;
+ bool bypass = false;
+
+ if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
+ return -ENODEV;;
+
+ pe = &phb->ioda.pe_array[pdn->pe_number];
+ if (pe->tce_bypass_enabled) {
+ top = pe->tce_bypass_base + memblock_end_of_DRAM() - 1;
+ bypass = (dma_mask >= top);
+ }
+
+ if (bypass) {
+ dev_info(&pdev->dev, "Using 64-bit DMA iommu bypass\n");
+ set_dma_ops(&pdev->dev, &dma_direct_ops);
+ set_dma_offset(&pdev->dev, pe->tce_bypass_base);
+ } else {
+ dev_info(&pdev->dev, "Using 32-bit DMA via iommu\n");
+ set_dma_ops(&pdev->dev, &dma_iommu_ops);
+ set_iommu_table_base(&pdev->dev, &pe->tce32_table);
+ }
+ return 0;
+}
+
static void pnv_ioda_setup_bus_dma(struct pnv_ioda_pe *pe, struct pci_bus *bus)
{
struct pci_dev *dev;
__free_pages(tce_mem, get_order(TCE32_TABLE_SIZE * segs));
}
+static void pnv_pci_ioda2_set_bypass(struct iommu_table *tbl, bool enable)
+{
+ struct pnv_ioda_pe *pe = container_of(tbl, struct pnv_ioda_pe,
+ tce32_table);
+ uint16_t window_id = (pe->pe_number << 1 ) + 1;
+ int64_t rc;
+
+ pe_info(pe, "%sabling 64-bit DMA bypass\n", enable ? "En" : "Dis");
+ if (enable) {
+ phys_addr_t top = memblock_end_of_DRAM();
+
+ top = roundup_pow_of_two(top);
+ rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id,
+ pe->pe_number,
+ window_id,
+ pe->tce_bypass_base,
+ top);
+ } else {
+ rc = opal_pci_map_pe_dma_window_real(pe->phb->opal_id,
+ pe->pe_number,
+ window_id,
+ pe->tce_bypass_base,
+ 0);
+
+ /*
+ * We might want to reset the DMA ops of all devices on
+ * this PE. However in theory, that shouldn't be necessary
+ * as this is used for VFIO/KVM pass-through and the device
+ * hasn't yet been returned to its kernel driver
+ */
+ }
+ if (rc)
+ pe_err(pe, "OPAL error %lld configuring bypass window\n", rc);
+ else
+ pe->tce_bypass_enabled = enable;
+}
+
+static void pnv_pci_ioda2_setup_bypass_pe(struct pnv_phb *phb,
+ struct pnv_ioda_pe *pe)
+{
+ /* TVE #1 is selected by PCI address bit 59 */
+ pe->tce_bypass_base = 1ull << 59;
+
+ /* Install set_bypass callback for VFIO */
+ pe->tce32_table.set_bypass = pnv_pci_ioda2_set_bypass;
+
+ /* Enable bypass by default */
+ pnv_pci_ioda2_set_bypass(&pe->tce32_table, true);
+}
+
static void pnv_pci_ioda2_setup_dma_pe(struct pnv_phb *phb,
struct pnv_ioda_pe *pe)
{
else
pnv_ioda_setup_bus_dma(pe, pe->pbus);
+ /* Also create a bypass window */
+ pnv_pci_ioda2_setup_bypass_pe(phb, pe);
return;
fail:
if (pe->tce32_seg >= 0)
/* Setup TCEs */
phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
+ phb->dma_set_mask = pnv_pci_ioda_dma_set_mask;
/* Setup shutdown function for kexec */
phb->shutdown = pnv_pci_ioda_shutdown;
pnv_pci_dma_fallback_setup(hose, pdev);
}
+int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
+{
+ struct pci_controller *hose = pci_bus_to_host(pdev->bus);
+ struct pnv_phb *phb = hose->private_data;
+
+ if (phb && phb->dma_set_mask)
+ return phb->dma_set_mask(phb, pdev, dma_mask);
+ return __dma_set_mask(&pdev->dev, dma_mask);
+}
+
void pnv_pci_shutdown(void)
{
struct pci_controller *hose;
struct iommu_table tce32_table;
phys_addr_t tce_inval_reg_phys;
- /* XXX TODO: Add support for additional 64-bit iommus */
+ /* 64-bit TCE bypass region */
+ bool tce_bypass_enabled;
+ uint64_t tce_bypass_base;
/* MSIs. MVE index is identical for for 32 and 64 bit MSI
* and -1 if not supported. (It's actually identical to the
unsigned int hwirq, unsigned int virq,
unsigned int is_64, struct msi_msg *msg);
void (*dma_dev_setup)(struct pnv_phb *phb, struct pci_dev *pdev);
+ int (*dma_set_mask)(struct pnv_phb *phb, struct pci_dev *pdev,
+ u64 dma_mask);
void (*fixup_phb)(struct pci_controller *hose);
u32 (*bdfn_to_pe)(struct pnv_phb *phb, struct pci_bus *bus, u32 devfn);
void (*shutdown)(struct pnv_phb *phb);
static inline void pnv_smp_init(void) { }
#endif
+struct pci_dev;
+
#ifdef CONFIG_PCI
extern void pnv_pci_init(void);
extern void pnv_pci_shutdown(void);
+extern int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask);
#else
static inline void pnv_pci_init(void) { }
static inline void pnv_pci_shutdown(void) { }
+
+static inline int pnv_pci_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
+{
+ return -ENODEV;
+}
#endif
extern void pnv_lpc_init(void);
#include <linux/interrupt.h>
#include <linux/bug.h>
#include <linux/cpuidle.h>
+#include <linux/pci.h>
#include <asm/machdep.h>
#include <asm/firmware.h>
{
}
+static int pnv_dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ if (dev_is_pci(dev))
+ return pnv_pci_dma_set_mask(to_pci_dev(dev), dma_mask);
+ return __dma_set_mask(dev, dma_mask);
+}
+
static void pnv_shutdown(void)
{
/* Let the PCI code clear up IODA tables */
.machine_shutdown = pnv_shutdown,
.power_save = powernv_idle,
.calibrate_decr = generic_calibrate_decr,
+ .dma_set_mask = pnv_dma_set_mask,
#ifdef CONFIG_KEXEC
.kexec_cpu_down = pnv_kexec_cpu_down,
#endif
select PPC_DOORBELL
select HAVE_CONTEXT_TRACKING
select HOTPLUG_CPU if SMP
+ select ARCH_RANDOM
default y
config PPC_SPLPAR
enable = 1;
if (enable) {
- eeh_subsystem_enabled = 1;
+ eeh_set_enable(true);
eeh_add_to_parent_pe(edev);
pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n",
{
struct device_node *dn, *pdn;
struct pci_bus *bus;
- const __be32 *pcie_link_speed_stats;
+ u32 pcie_link_speed_stats[2];
+ int rc;
bus = bridge->bus;
return 0;
for (pdn = dn; pdn != NULL; pdn = of_get_next_parent(pdn)) {
- pcie_link_speed_stats = of_get_property(pdn,
- "ibm,pcie-link-speed-stats", NULL);
- if (pcie_link_speed_stats)
+ rc = of_property_read_u32_array(pdn,
+ "ibm,pcie-link-speed-stats",
+ &pcie_link_speed_stats[0], 2);
+ if (!rc)
break;
}
of_node_put(pdn);
- if (!pcie_link_speed_stats) {
+ if (rc) {
pr_err("no ibm,pcie-link-speed-stats property\n");
return 0;
}
- switch (be32_to_cpup(pcie_link_speed_stats)) {
+ switch (pcie_link_speed_stats[0]) {
case 0x01:
bus->max_bus_speed = PCIE_SPEED_2_5GT;
break;
case 0x02:
bus->max_bus_speed = PCIE_SPEED_5_0GT;
break;
+ case 0x04:
+ bus->max_bus_speed = PCIE_SPEED_8_0GT;
+ break;
default:
bus->max_bus_speed = PCI_SPEED_UNKNOWN;
break;
}
- switch (be32_to_cpup(pcie_link_speed_stats)) {
+ switch (pcie_link_speed_stats[1]) {
case 0x01:
bus->cur_bus_speed = PCIE_SPEED_2_5GT;
break;
case 0x02:
bus->cur_bus_speed = PCIE_SPEED_5_0GT;
break;
+ case 0x04:
+ bus->cur_bus_speed = PCIE_SPEED_8_0GT;
+ break;
default:
bus->cur_bus_speed = PCI_SPEED_UNKNOWN;
break;
{
long rc;
- if (firmware_has_feature(FW_FEATURE_SET_MODE) &&
- (image->type != KEXEC_TYPE_CRASH)) {
+ if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
rc = pSeries_disable_reloc_on_exc();
if (rc != H_SUCCESS)
pr_warning("Warning: Failed to disable relocation on "
/* Default: read HW settings */
if (flow_type == IRQ_TYPE_DEFAULT) {
- switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) |
- MPIC_INFO(VECPRI_SENSE_MASK))) {
- case MPIC_INFO(VECPRI_SENSE_EDGE) |
- MPIC_INFO(VECPRI_POLARITY_POSITIVE):
- flow_type = IRQ_TYPE_EDGE_RISING;
- break;
- case MPIC_INFO(VECPRI_SENSE_EDGE) |
- MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
- flow_type = IRQ_TYPE_EDGE_FALLING;
- break;
- case MPIC_INFO(VECPRI_SENSE_LEVEL) |
- MPIC_INFO(VECPRI_POLARITY_POSITIVE):
- flow_type = IRQ_TYPE_LEVEL_HIGH;
- break;
- case MPIC_INFO(VECPRI_SENSE_LEVEL) |
- MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
- flow_type = IRQ_TYPE_LEVEL_LOW;
- break;
- }
+ int vold_ps;
+
+ vold_ps = vold & (MPIC_INFO(VECPRI_POLARITY_MASK) |
+ MPIC_INFO(VECPRI_SENSE_MASK));
+
+ if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) |
+ MPIC_INFO(VECPRI_POLARITY_POSITIVE)))
+ flow_type = IRQ_TYPE_EDGE_RISING;
+ else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_EDGE) |
+ MPIC_INFO(VECPRI_POLARITY_NEGATIVE)))
+ flow_type = IRQ_TYPE_EDGE_FALLING;
+ else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) |
+ MPIC_INFO(VECPRI_POLARITY_POSITIVE)))
+ flow_type = IRQ_TYPE_LEVEL_HIGH;
+ else if (vold_ps == (MPIC_INFO(VECPRI_SENSE_LEVEL) |
+ MPIC_INFO(VECPRI_POLARITY_NEGATIVE)))
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+ else
+ WARN_ONCE(1, "mpic: unknown IRQ type %d\n", vold);
}
/* Apply to irq desc */
if (xmon_speaker == me)
return;
+
for (;;) {
- if (xmon_speaker == 0) {
- last_speaker = cmpxchg(&xmon_speaker, 0, me);
- if (last_speaker == 0)
- return;
- }
- timeout = 10000000;
+ last_speaker = cmpxchg(&xmon_speaker, 0, me);
+ if (last_speaker == 0)
+ return;
+
+ /*
+ * Wait a full second for the lock, we might be on a slow
+ * console, but check every 100us.
+ */
+ timeout = 10000;
while (xmon_speaker == last_speaker) {
- if (--timeout > 0)
+ if (--timeout > 0) {
+ udelay(100);
continue;
+ }
+
/* hostile takeover */
prev = cmpxchg(&xmon_speaker, last_speaker, me);
if (prev == last_speaker)
}
xmon_fault_jmp[cpu] = recurse_jmp;
- cpumask_set_cpu(cpu, &cpus_in_xmon);
bp = NULL;
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT))
release_output_lock();
}
+ cpumask_set_cpu(cpu, &cpus_in_xmon);
+
waiting:
secondary = 1;
while (secondary && !xmon_gate) {
{
int rc;
+ init_virt_timer(&appldata_timer);
appldata_timer.function = appldata_timer_function;
appldata_timer.data = (unsigned long) &appldata_work;
#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/spinlock.h>
#include "crypt_s390.h"
#define AES_KEYLEN_128 1
#define AES_KEYLEN_256 4
static u8 *ctrblk;
+static DEFINE_SPINLOCK(ctrblk_lock);
static char keylen_flag;
struct s390_aes_ctx {
return aes_set_key(tfm, in_key, key_len);
}
+static unsigned int __ctrblk_init(u8 *ctrptr, unsigned int nbytes)
+{
+ unsigned int i, n;
+
+ /* only use complete blocks, max. PAGE_SIZE */
+ n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : nbytes & ~(AES_BLOCK_SIZE - 1);
+ for (i = AES_BLOCK_SIZE; i < n; i += AES_BLOCK_SIZE) {
+ memcpy(ctrptr + i, ctrptr + i - AES_BLOCK_SIZE,
+ AES_BLOCK_SIZE);
+ crypto_inc(ctrptr + i, AES_BLOCK_SIZE);
+ }
+ return n;
+}
+
static int ctr_aes_crypt(struct blkcipher_desc *desc, long func,
struct s390_aes_ctx *sctx, struct blkcipher_walk *walk)
{
int ret = blkcipher_walk_virt_block(desc, walk, AES_BLOCK_SIZE);
- unsigned int i, n, nbytes;
- u8 buf[AES_BLOCK_SIZE];
- u8 *out, *in;
+ unsigned int n, nbytes;
+ u8 buf[AES_BLOCK_SIZE], ctrbuf[AES_BLOCK_SIZE];
+ u8 *out, *in, *ctrptr = ctrbuf;
if (!walk->nbytes)
return ret;
- memcpy(ctrblk, walk->iv, AES_BLOCK_SIZE);
+ if (spin_trylock(&ctrblk_lock))
+ ctrptr = ctrblk;
+
+ memcpy(ctrptr, walk->iv, AES_BLOCK_SIZE);
while ((nbytes = walk->nbytes) >= AES_BLOCK_SIZE) {
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
while (nbytes >= AES_BLOCK_SIZE) {
- /* only use complete blocks, max. PAGE_SIZE */
- n = (nbytes > PAGE_SIZE) ? PAGE_SIZE :
- nbytes & ~(AES_BLOCK_SIZE - 1);
- for (i = AES_BLOCK_SIZE; i < n; i += AES_BLOCK_SIZE) {
- memcpy(ctrblk + i, ctrblk + i - AES_BLOCK_SIZE,
- AES_BLOCK_SIZE);
- crypto_inc(ctrblk + i, AES_BLOCK_SIZE);
- }
- ret = crypt_s390_kmctr(func, sctx->key, out, in, n, ctrblk);
- if (ret < 0 || ret != n)
+ if (ctrptr == ctrblk)
+ n = __ctrblk_init(ctrptr, nbytes);
+ else
+ n = AES_BLOCK_SIZE;
+ ret = crypt_s390_kmctr(func, sctx->key, out, in,
+ n, ctrptr);
+ if (ret < 0 || ret != n) {
+ if (ctrptr == ctrblk)
+ spin_unlock(&ctrblk_lock);
return -EIO;
+ }
if (n > AES_BLOCK_SIZE)
- memcpy(ctrblk, ctrblk + n - AES_BLOCK_SIZE,
+ memcpy(ctrptr, ctrptr + n - AES_BLOCK_SIZE,
AES_BLOCK_SIZE);
- crypto_inc(ctrblk, AES_BLOCK_SIZE);
+ crypto_inc(ctrptr, AES_BLOCK_SIZE);
out += n;
in += n;
nbytes -= n;
}
ret = blkcipher_walk_done(desc, walk, nbytes);
}
+ if (ctrptr == ctrblk) {
+ if (nbytes)
+ memcpy(ctrbuf, ctrptr, AES_BLOCK_SIZE);
+ else
+ memcpy(walk->iv, ctrptr, AES_BLOCK_SIZE);
+ spin_unlock(&ctrblk_lock);
+ }
/*
* final block may be < AES_BLOCK_SIZE, copy only nbytes
*/
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
ret = crypt_s390_kmctr(func, sctx->key, buf, in,
- AES_BLOCK_SIZE, ctrblk);
+ AES_BLOCK_SIZE, ctrbuf);
if (ret < 0 || ret != AES_BLOCK_SIZE)
return -EIO;
memcpy(out, buf, nbytes);
- crypto_inc(ctrblk, AES_BLOCK_SIZE);
+ crypto_inc(ctrbuf, AES_BLOCK_SIZE);
ret = blkcipher_walk_done(desc, walk, 0);
+ memcpy(walk->iv, ctrbuf, AES_BLOCK_SIZE);
}
- memcpy(walk->iv, ctrblk, AES_BLOCK_SIZE);
+
return ret;
}
#define DES3_KEY_SIZE (3 * DES_KEY_SIZE)
static u8 *ctrblk;
+static DEFINE_SPINLOCK(ctrblk_lock);
struct s390_des_ctx {
u8 iv[DES_BLOCK_SIZE];
}
static int cbc_desall_crypt(struct blkcipher_desc *desc, long func,
- u8 *iv, struct blkcipher_walk *walk)
+ struct blkcipher_walk *walk)
{
+ struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
int ret = blkcipher_walk_virt(desc, walk);
unsigned int nbytes = walk->nbytes;
+ struct {
+ u8 iv[DES_BLOCK_SIZE];
+ u8 key[DES3_KEY_SIZE];
+ } param;
if (!nbytes)
goto out;
- memcpy(iv, walk->iv, DES_BLOCK_SIZE);
+ memcpy(param.iv, walk->iv, DES_BLOCK_SIZE);
+ memcpy(param.key, ctx->key, DES3_KEY_SIZE);
do {
/* only use complete blocks */
unsigned int n = nbytes & ~(DES_BLOCK_SIZE - 1);
u8 *out = walk->dst.virt.addr;
u8 *in = walk->src.virt.addr;
- ret = crypt_s390_kmc(func, iv, out, in, n);
+ ret = crypt_s390_kmc(func, ¶m, out, in, n);
if (ret < 0 || ret != n)
return -EIO;
nbytes &= DES_BLOCK_SIZE - 1;
ret = blkcipher_walk_done(desc, walk, nbytes);
} while ((nbytes = walk->nbytes));
- memcpy(walk->iv, iv, DES_BLOCK_SIZE);
+ memcpy(walk->iv, param.iv, DES_BLOCK_SIZE);
out:
return ret;
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_DEA_ENCRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_DEA_ENCRYPT, &walk);
}
static int cbc_des_decrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_DEA_DECRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_DEA_DECRYPT, &walk);
}
static struct crypto_alg cbc_des_alg = {
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_TDEA_192_ENCRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_TDEA_192_ENCRYPT, &walk);
}
static int cbc_des3_decrypt(struct blkcipher_desc *desc,
struct scatterlist *dst, struct scatterlist *src,
unsigned int nbytes)
{
- struct s390_des_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
struct blkcipher_walk walk;
blkcipher_walk_init(&walk, dst, src, nbytes);
- return cbc_desall_crypt(desc, KMC_TDEA_192_DECRYPT, ctx->iv, &walk);
+ return cbc_desall_crypt(desc, KMC_TDEA_192_DECRYPT, &walk);
}
static struct crypto_alg cbc_des3_alg = {
}
};
+static unsigned int __ctrblk_init(u8 *ctrptr, unsigned int nbytes)
+{
+ unsigned int i, n;
+
+ /* align to block size, max. PAGE_SIZE */
+ n = (nbytes > PAGE_SIZE) ? PAGE_SIZE : nbytes & ~(DES_BLOCK_SIZE - 1);
+ for (i = DES_BLOCK_SIZE; i < n; i += DES_BLOCK_SIZE) {
+ memcpy(ctrptr + i, ctrptr + i - DES_BLOCK_SIZE, DES_BLOCK_SIZE);
+ crypto_inc(ctrptr + i, DES_BLOCK_SIZE);
+ }
+ return n;
+}
+
static int ctr_desall_crypt(struct blkcipher_desc *desc, long func,
- struct s390_des_ctx *ctx, struct blkcipher_walk *walk)
+ struct s390_des_ctx *ctx,
+ struct blkcipher_walk *walk)
{
int ret = blkcipher_walk_virt_block(desc, walk, DES_BLOCK_SIZE);
- unsigned int i, n, nbytes;
- u8 buf[DES_BLOCK_SIZE];
- u8 *out, *in;
+ unsigned int n, nbytes;
+ u8 buf[DES_BLOCK_SIZE], ctrbuf[DES_BLOCK_SIZE];
+ u8 *out, *in, *ctrptr = ctrbuf;
+
+ if (!walk->nbytes)
+ return ret;
- memcpy(ctrblk, walk->iv, DES_BLOCK_SIZE);
+ if (spin_trylock(&ctrblk_lock))
+ ctrptr = ctrblk;
+
+ memcpy(ctrptr, walk->iv, DES_BLOCK_SIZE);
while ((nbytes = walk->nbytes) >= DES_BLOCK_SIZE) {
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
while (nbytes >= DES_BLOCK_SIZE) {
- /* align to block size, max. PAGE_SIZE */
- n = (nbytes > PAGE_SIZE) ? PAGE_SIZE :
- nbytes & ~(DES_BLOCK_SIZE - 1);
- for (i = DES_BLOCK_SIZE; i < n; i += DES_BLOCK_SIZE) {
- memcpy(ctrblk + i, ctrblk + i - DES_BLOCK_SIZE,
- DES_BLOCK_SIZE);
- crypto_inc(ctrblk + i, DES_BLOCK_SIZE);
- }
- ret = crypt_s390_kmctr(func, ctx->key, out, in, n, ctrblk);
- if (ret < 0 || ret != n)
+ if (ctrptr == ctrblk)
+ n = __ctrblk_init(ctrptr, nbytes);
+ else
+ n = DES_BLOCK_SIZE;
+ ret = crypt_s390_kmctr(func, ctx->key, out, in,
+ n, ctrptr);
+ if (ret < 0 || ret != n) {
+ if (ctrptr == ctrblk)
+ spin_unlock(&ctrblk_lock);
return -EIO;
+ }
if (n > DES_BLOCK_SIZE)
- memcpy(ctrblk, ctrblk + n - DES_BLOCK_SIZE,
+ memcpy(ctrptr, ctrptr + n - DES_BLOCK_SIZE,
DES_BLOCK_SIZE);
- crypto_inc(ctrblk, DES_BLOCK_SIZE);
+ crypto_inc(ctrptr, DES_BLOCK_SIZE);
out += n;
in += n;
nbytes -= n;
}
ret = blkcipher_walk_done(desc, walk, nbytes);
}
-
+ if (ctrptr == ctrblk) {
+ if (nbytes)
+ memcpy(ctrbuf, ctrptr, DES_BLOCK_SIZE);
+ else
+ memcpy(walk->iv, ctrptr, DES_BLOCK_SIZE);
+ spin_unlock(&ctrblk_lock);
+ }
/* final block may be < DES_BLOCK_SIZE, copy only nbytes */
if (nbytes) {
out = walk->dst.virt.addr;
in = walk->src.virt.addr;
ret = crypt_s390_kmctr(func, ctx->key, buf, in,
- DES_BLOCK_SIZE, ctrblk);
+ DES_BLOCK_SIZE, ctrbuf);
if (ret < 0 || ret != DES_BLOCK_SIZE)
return -EIO;
memcpy(out, buf, nbytes);
- crypto_inc(ctrblk, DES_BLOCK_SIZE);
+ crypto_inc(ctrbuf, DES_BLOCK_SIZE);
ret = blkcipher_walk_done(desc, walk, 0);
+ memcpy(walk->iv, ctrbuf, DES_BLOCK_SIZE);
}
- memcpy(walk->iv, ctrblk, DES_BLOCK_SIZE);
return ret;
}
.quad 0 # cr12: tracing off
.quad 0 # cr13: home space segment table
.quad 0xc0000000 # cr14: machine check handling off
- .quad 0 # cr15: linkage stack operations
+ .quad .Llinkage_stack # cr15: linkage stack operations
.Lpcmsk:.quad 0x0000000180000000
.L4malign:.quad 0xffffffffffc00000
.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
.Lparmaddr:
.quad PARMAREA
.align 64
-.Lduct: .long 0,0,0,0,.Lduald,0,0,0
+.Lduct: .long 0,.Laste,.Laste,0,.Lduald,0,0,0
.long 0,0,0,0,0,0,0,0
+.Laste: .quad 0,0xffffffffffffffff,0,0,0,0,0,0
.align 128
.Lduald:.rept 8
.long 0x80000000,0,0,0 # invalid access-list entries
.endr
+.Llinkage_stack:
+ .long 0,0,0x89000000,0,0,0,0x8a000000,0
ENTRY(_ehead)
#include <linux/mm.h>
#include <linux/gfp.h>
#include <linux/init.h>
+#include <asm/setup.h>
+#include <asm/ipl.h>
#define ESSA_SET_STABLE 1
#define ESSA_SET_UNUSED 2
if (!cmma_flag)
return;
+ /*
+ * Disable CMM for dump, otherwise the tprot based memory
+ * detection can fail because of unstable pages.
+ */
+ if (OLDMEM_BASE || ipl_info.type == IPL_TYPE_FCP_DUMP) {
+ cmma_flag = 0;
+ return;
+ }
asm volatile(
" .insn rrf,0xb9ab0000,%1,%1,0,0\n"
"0: la %0,0\n"
bool "Intel MID platform support"
depends on X86_32
depends on X86_EXTENDED_PLATFORM
+ depends on X86_PLATFORM_DEVICES
depends on PCI
depends on PCI_GOANY
depends on X86_IO_APIC
This options enables microcode patch loading support for Intel
processors.
- For latest news and information on obtaining all the required
- Intel ingredients for this driver, check:
- <http://www.urbanmyth.org/microcode/>.
+ For the current Intel microcode data package go to
+ <https://downloadcenter.intel.com> and search for
+ 'Linux Processor Microcode Data File'.
config MICROCODE_AMD
bool "AMD microcode loading support"
config X86_DECODER_SELFTEST
bool "x86 instruction decoder selftest"
depends on DEBUG_KERNEL && KPROBES
+ depends on !COMPILE_TEST
---help---
Perform x86 instruction decoder selftests at build time.
This option is useful for checking the sanity of x86 instruction
extern void amd_flush_garts(void);
extern int amd_numa_init(void);
extern int amd_get_subcaches(int);
-extern int amd_set_subcaches(int, int);
+extern int amd_set_subcaches(int, unsigned long);
struct amd_l3_cache {
unsigned indices;
extern void efi_sync_low_kernel_mappings(void);
extern void efi_setup_page_tables(void);
extern void __init old_map_region(efi_memory_desc_t *md);
+extern void __init runtime_code_page_mkexec(void);
+extern void __init efi_runtime_mkexec(void);
struct efi_setup_data {
u64 fw_vendor;
return a.pte == b.pte;
}
+static inline int pteval_present(pteval_t pteval)
+{
+ /*
+ * Yes Linus, _PAGE_PROTNONE == _PAGE_NUMA. Expressing it this
+ * way clearly states that the intent is that protnone and numa
+ * hinting ptes are considered present for the purposes of
+ * pagetable operations like zapping, protection changes, gup etc.
+ */
+ return pteval & (_PAGE_PRESENT | _PAGE_PROTNONE | _PAGE_NUMA);
+}
+
static inline int pte_present(pte_t a)
{
- return pte_flags(a) & (_PAGE_PRESENT | _PAGE_PROTNONE |
- _PAGE_NUMA);
+ return pteval_present(pte_flags(a));
}
#define pte_accessible pte_accessible
static inline void __flush_tlb_one(unsigned long addr)
{
- count_vm_event(NR_TLB_LOCAL_FLUSH_ONE);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
__flush_tlb_single(addr);
}
*/
static inline void __flush_tlb_up(void)
{
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
__flush_tlb();
}
static inline void flush_tlb_all(void)
{
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
__flush_tlb_all();
}
extern int m2p_add_override(unsigned long mfn, struct page *page,
struct gnttab_map_grant_ref *kmap_op);
extern int m2p_remove_override(struct page *page,
- struct gnttab_map_grant_ref *kmap_op,
- unsigned long mfn);
+ struct gnttab_map_grant_ref *kmap_op);
extern struct page *m2p_find_override(unsigned long mfn);
extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn);
pfn = m2p_find_override_pfn(mfn, ~0);
}
- /*
+ /*
* pfn is ~0 if there are no entries in the m2p for mfn or if the
* entry doesn't map back to the mfn and m2p_override doesn't have a
* valid entry for it.
return (mask >> (4 * cuid)) & 0xf;
}
-int amd_set_subcaches(int cpu, int mask)
+int amd_set_subcaches(int cpu, unsigned long mask)
{
static unsigned int reset, ban;
struct amd_northbridge *nb = node_to_amd_nb(amd_get_nb_id(cpu));
static void cpu_set_tlb_flushall_shift(struct cpuinfo_x86 *c)
{
- tlb_flushall_shift = 5;
-
- if (c->x86 <= 0x11)
- tlb_flushall_shift = 4;
+ tlb_flushall_shift = 6;
}
static void cpu_detect_tlb_amd(struct cpuinfo_x86 *c)
raw_local_save_flags(eflags);
BUG_ON(eflags & X86_EFLAGS_AC);
- if (cpu_has(c, X86_FEATURE_SMAP))
+ if (cpu_has(c, X86_FEATURE_SMAP)) {
+#ifdef CONFIG_X86_SMAP
set_in_cr4(X86_CR4_SMAP);
+#else
+ clear_in_cr4(X86_CR4_SMAP);
+#endif
+ }
}
/*
case 0x61d: /* six-core 45 nm xeon "Dunnington" */
tlb_flushall_shift = -1;
break;
+ case 0x63a: /* Ivybridge */
+ tlb_flushall_shift = 2;
+ break;
case 0x61a: /* 45 nm nehalem, "Bloomfield" */
case 0x61e: /* 45 nm nehalem, "Lynnfield" */
case 0x625: /* 32 nm nehalem, "Clarkdale" */
case 0x62c: /* 32 nm nehalem, "Gulftown" */
case 0x62e: /* 45 nm nehalem-ex, "Beckton" */
case 0x62f: /* 32 nm Xeon E7 */
- tlb_flushall_shift = 6;
- break;
case 0x62a: /* SandyBridge */
case 0x62d: /* SandyBridge, "Romely-EP" */
- tlb_flushall_shift = 5;
- break;
- case 0x63a: /* Ivybridge */
- tlb_flushall_shift = 1;
- break;
default:
tlb_flushall_shift = 6;
}
uci->cpu_sig.sig = cpuid_eax(0x00000001);
}
+
+static void __init get_bsp_sig(void)
+{
+ unsigned int bsp = boot_cpu_data.cpu_index;
+ struct ucode_cpu_info *uci = ucode_cpu_info + bsp;
+
+ if (!uci->cpu_sig.sig)
+ smp_call_function_single(bsp, collect_cpu_sig_on_bsp, NULL, 1);
+}
#else
void load_ucode_amd_ap(void)
{
int __init save_microcode_in_initrd_amd(void)
{
+ unsigned long cont;
enum ucode_state ret;
u32 eax;
-#ifdef CONFIG_X86_32
- unsigned int bsp = boot_cpu_data.cpu_index;
- struct ucode_cpu_info *uci = ucode_cpu_info + bsp;
-
- if (!uci->cpu_sig.sig)
- smp_call_function_single(bsp, collect_cpu_sig_on_bsp, NULL, 1);
+ if (!container)
+ return -EINVAL;
+#ifdef CONFIG_X86_32
+ get_bsp_sig();
+ cont = (unsigned long)container;
+#else
/*
- * Take into account the fact that the ramdisk might get relocated
- * and therefore we need to recompute the container's position in
- * virtual memory space.
+ * We need the physical address of the container for both bitness since
+ * boot_params.hdr.ramdisk_image is a physical address.
*/
- container = (u8 *)(__va((u32)relocated_ramdisk) +
- ((u32)container - boot_params.hdr.ramdisk_image));
+ cont = __pa(container);
#endif
+
+ /*
+ * Take into account the fact that the ramdisk might get relocated and
+ * therefore we need to recompute the container's position in virtual
+ * memory space.
+ */
+ if (relocated_ramdisk)
+ container = (u8 *)(__va(relocated_ramdisk) +
+ (cont - boot_params.hdr.ramdisk_image));
+
if (ucode_new_rev)
pr_info("microcode: updated early to new patch_level=0x%08x\n",
ucode_new_rev);
- if (!container)
- return -EINVAL;
-
eax = cpuid_eax(0x00000001);
eax = ((eax >> 8) & 0xf) + ((eax >> 20) & 0xff);
}
/* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
__flush_tlb();
/* Save MTRR state */
static void post_set(void) __releases(set_atomicity_lock)
{
/* Flush TLBs (no need to flush caches - they are disabled) */
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
__flush_tlb();
/* Intel (P6) standard MTRRs */
return addr >= start && addr < end;
}
-static int
-do_ftrace_mod_code(unsigned long ip, const void *new_code)
+static unsigned long text_ip_addr(unsigned long ip)
{
/*
* On x86_64, kernel text mappings are mapped read-only with
if (within(ip, (unsigned long)_text, (unsigned long)_etext))
ip = (unsigned long)__va(__pa_symbol(ip));
- return probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE);
+ return ip;
}
static const unsigned char *ftrace_nop_replace(void)
if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
return -EINVAL;
+ ip = text_ip_addr(ip);
+
/* replace the text with the new text */
- if (do_ftrace_mod_code(ip, new_code))
+ if (probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE))
return -EPERM;
sync_core();
return -EINVAL;
}
-int ftrace_update_ftrace_func(ftrace_func_t func)
+static unsigned long ftrace_update_func;
+
+static int update_ftrace_func(unsigned long ip, void *new)
{
- unsigned long ip = (unsigned long)(&ftrace_call);
- unsigned char old[MCOUNT_INSN_SIZE], *new;
+ unsigned char old[MCOUNT_INSN_SIZE];
int ret;
- memcpy(old, &ftrace_call, MCOUNT_INSN_SIZE);
- new = ftrace_call_replace(ip, (unsigned long)func);
+ memcpy(old, (void *)ip, MCOUNT_INSN_SIZE);
+
+ ftrace_update_func = ip;
+ /* Make sure the breakpoints see the ftrace_update_func update */
+ smp_wmb();
/* See comment above by declaration of modifying_ftrace_code */
atomic_inc(&modifying_ftrace_code);
ret = ftrace_modify_code(ip, old, new);
+ atomic_dec(&modifying_ftrace_code);
+
+ return ret;
+}
+
+int ftrace_update_ftrace_func(ftrace_func_t func)
+{
+ unsigned long ip = (unsigned long)(&ftrace_call);
+ unsigned char *new;
+ int ret;
+
+ new = ftrace_call_replace(ip, (unsigned long)func);
+ ret = update_ftrace_func(ip, new);
+
/* Also update the regs callback function */
if (!ret) {
ip = (unsigned long)(&ftrace_regs_call);
- memcpy(old, &ftrace_regs_call, MCOUNT_INSN_SIZE);
new = ftrace_call_replace(ip, (unsigned long)func);
- ret = ftrace_modify_code(ip, old, new);
+ ret = update_ftrace_func(ip, new);
}
- atomic_dec(&modifying_ftrace_code);
-
return ret;
}
static int is_ftrace_caller(unsigned long ip)
{
- if (ip == (unsigned long)(&ftrace_call) ||
- ip == (unsigned long)(&ftrace_regs_call))
+ if (ip == ftrace_update_func)
return 1;
return 0;
#ifdef CONFIG_DYNAMIC_FTRACE
extern void ftrace_graph_call(void);
-static int ftrace_mod_jmp(unsigned long ip,
- int old_offset, int new_offset)
+static unsigned char *ftrace_jmp_replace(unsigned long ip, unsigned long addr)
{
- unsigned char code[MCOUNT_INSN_SIZE];
+ static union ftrace_code_union calc;
- if (probe_kernel_read(code, (void *)ip, MCOUNT_INSN_SIZE))
- return -EFAULT;
+ /* Jmp not a call (ignore the .e8) */
+ calc.e8 = 0xe9;
+ calc.offset = ftrace_calc_offset(ip + MCOUNT_INSN_SIZE, addr);
- if (code[0] != 0xe9 || old_offset != *(int *)(&code[1]))
- return -EINVAL;
+ /*
+ * ftrace external locks synchronize the access to the static variable.
+ */
+ return calc.code;
+}
- *(int *)(&code[1]) = new_offset;
+static int ftrace_mod_jmp(unsigned long ip, void *func)
+{
+ unsigned char *new;
- if (do_ftrace_mod_code(ip, &code))
- return -EPERM;
+ new = ftrace_jmp_replace(ip, (unsigned long)func);
- return 0;
+ return update_ftrace_func(ip, new);
}
int ftrace_enable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
- int old_offset, new_offset;
- old_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);
- new_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);
-
- return ftrace_mod_jmp(ip, old_offset, new_offset);
+ return ftrace_mod_jmp(ip, &ftrace_graph_caller);
}
int ftrace_disable_ftrace_graph_caller(void)
{
unsigned long ip = (unsigned long)(&ftrace_graph_call);
- int old_offset, new_offset;
-
- old_offset = (unsigned long)(&ftrace_graph_caller) - (ip + MCOUNT_INSN_SIZE);
- new_offset = (unsigned long)(&ftrace_stub) - (ip + MCOUNT_INSN_SIZE);
- return ftrace_mod_jmp(ip, old_offset, new_offset);
+ return ftrace_mod_jmp(ip, &ftrace_stub);
}
#endif /* !CONFIG_DYNAMIC_FTRACE */
EXPORT_SYMBOL_GPL(vector_used_by_percpu_irq);
#ifdef CONFIG_HOTPLUG_CPU
+
+/* These two declarations are only used in check_irq_vectors_for_cpu_disable()
+ * below, which is protected by stop_machine(). Putting them on the stack
+ * results in a stack frame overflow. Dynamically allocating could result in a
+ * failure so declare these two cpumasks as global.
+ */
+static struct cpumask affinity_new, online_new;
+
/*
* This cpu is going to be removed and its vectors migrated to the remaining
* online cpus. Check to see if there are enough vectors in the remaining cpus.
unsigned int this_cpu, vector, this_count, count;
struct irq_desc *desc;
struct irq_data *data;
- struct cpumask affinity_new, online_new;
this_cpu = smp_processor_id();
cpumask_copy(&online_new, cpu_online_mask);
quirk_amd_nb_node);
#endif
+
+#ifdef CONFIG_PCI
+/*
+ * Processor does not ensure DRAM scrub read/write sequence
+ * is atomic wrt accesses to CC6 save state area. Therefore
+ * if a concurrent scrub read/write access is to same address
+ * the entry may appear as if it is not written. This quirk
+ * applies to Fam16h models 00h-0Fh
+ *
+ * See "Revision Guide" for AMD F16h models 00h-0fh,
+ * document 51810 rev. 3.04, Nov 2013
+ */
+static void amd_disable_seq_and_redirect_scrub(struct pci_dev *dev)
+{
+ u32 val;
+
+ /*
+ * Suggested workaround:
+ * set D18F3x58[4:0] = 00h and set D18F3x5C[0] = 0b
+ */
+ pci_read_config_dword(dev, 0x58, &val);
+ if (val & 0x1F) {
+ val &= ~(0x1F);
+ pci_write_config_dword(dev, 0x58, val);
+ }
+
+ pci_read_config_dword(dev, 0x5C, &val);
+ if (val & BIT(0)) {
+ val &= ~BIT(0);
+ pci_write_config_dword(dev, 0x5c, val);
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3,
+ amd_disable_seq_and_redirect_scrub);
+
+#endif
* dance when its actually needed.
*/
- preempt_disable();
+ preempt_disable_notrace();
data = this_cpu_read(cyc2ns.head);
tail = this_cpu_read(cyc2ns.tail);
if (!--data->__count)
this_cpu_write(cyc2ns.tail, data);
}
- preempt_enable();
+ preempt_enable_notrace();
return ns;
}
static inline bool smap_violation(int error_code, struct pt_regs *regs)
{
+ if (!IS_ENABLED(CONFIG_X86_SMAP))
+ return false;
+
+ if (!static_cpu_has(X86_FEATURE_SMAP))
+ return false;
+
if (error_code & PF_USER)
return false;
if (unlikely(error_code & PF_RSVD))
pgtable_bad(regs, error_code, address);
- if (static_cpu_has(X86_FEATURE_SMAP)) {
- if (unlikely(smap_violation(error_code, regs))) {
- bad_area_nosemaphore(regs, error_code, address);
- return;
- }
+ if (unlikely(smap_violation(error_code, regs))) {
+ bad_area_nosemaphore(regs, error_code, address);
+ return;
}
/*
struct numa_memblk *mb = &mi->blk[i];
memblock_set_node(mb->start, mb->end - mb->start,
&memblock.memory, mb->nid);
-
- /*
- * At this time, all memory regions reserved by memblock are
- * used by the kernel. Set the nid in memblock.reserved will
- * mark out all the nodes the kernel resides in.
- */
- memblock_set_node(mb->start, mb->end - mb->start,
- &memblock.reserved, mb->nid);
}
/*
static void __init numa_clear_kernel_node_hotplug(void)
{
int i, nid;
- nodemask_t numa_kernel_nodes;
+ nodemask_t numa_kernel_nodes = NODE_MASK_NONE;
unsigned long start, end;
struct memblock_type *type = &memblock.reserved;
+ /*
+ * At this time, all memory regions reserved by memblock are
+ * used by the kernel. Set the nid in memblock.reserved will
+ * mark out all the nodes the kernel resides in.
+ */
+ for (i = 0; i < numa_meminfo.nr_blks; i++) {
+ struct numa_memblk *mb = &numa_meminfo.blk[i];
+ memblock_set_node(mb->start, mb->end - mb->start,
+ &memblock.reserved, mb->nid);
+ }
+
/* Mark all kernel nodes. */
for (i = 0; i < type->cnt; i++)
node_set(type->regions[i].nid, numa_kernel_nodes);
nid, start, end);
printk(KERN_DEBUG " Setting physnode_map array to node %d for pfns:\n", nid);
printk(KERN_DEBUG " ");
+ start = round_down(start, PAGES_PER_SECTION);
+ end = round_up(end, PAGES_PER_SECTION);
for (pfn = start; pfn < end; pfn += PAGES_PER_SECTION) {
physnode_map[pfn / PAGES_PER_SECTION] = nid;
printk(KERN_CONT "%lx ", pfn);
return acpi_numa < 0;
}
-/* Callback for SLIT parsing */
+/*
+ * Callback for SLIT parsing. pxm_to_node() returns NUMA_NO_NODE for
+ * I/O localities since SRAT does not list them. I/O localities are
+ * not supported at this point.
+ */
void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
{
int i, j;
- for (i = 0; i < slit->locality_count; i++)
- for (j = 0; j < slit->locality_count; j++)
+ for (i = 0; i < slit->locality_count; i++) {
+ if (pxm_to_node(i) == NUMA_NO_NODE)
+ continue;
+ for (j = 0; j < slit->locality_count; j++) {
+ if (pxm_to_node(j) == NUMA_NO_NODE)
+ continue;
numa_set_distance(pxm_to_node(i), pxm_to_node(j),
slit->entry[slit->locality_count * i + j]);
+ }
+ }
}
/* Callback for Proximity Domain -> x2APIC mapping */
if (f->flush_mm != this_cpu_read(cpu_tlbstate.active_mm))
return;
- count_vm_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
+ count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_OK) {
if (f->flush_end == TLB_FLUSH_ALL)
local_flush_tlb();
info.flush_start = start;
info.flush_end = end;
- count_vm_event(NR_TLB_REMOTE_FLUSH);
+ count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
if (is_uv_system()) {
unsigned int cpu;
preempt_disable();
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
local_flush_tlb();
if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
flush_tlb_others(mm_cpumask(mm), mm, 0UL, TLB_FLUSH_ALL);
preempt_enable();
}
-/*
- * It can find out the THP large page, or
- * HUGETLB page in tlb_flush when THP disabled
- */
-static inline unsigned long has_large_page(struct mm_struct *mm,
- unsigned long start, unsigned long end)
-{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- unsigned long addr = ALIGN(start, HPAGE_SIZE);
- for (; addr < end; addr += HPAGE_SIZE) {
- pgd = pgd_offset(mm, addr);
- if (likely(!pgd_none(*pgd))) {
- pud = pud_offset(pgd, addr);
- if (likely(!pud_none(*pud))) {
- pmd = pmd_offset(pud, addr);
- if (likely(!pmd_none(*pmd)))
- if (pmd_large(*pmd))
- return addr;
- }
- }
- }
- return 0;
-}
-
void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start,
unsigned long end, unsigned long vmflag)
{
unsigned long addr;
unsigned act_entries, tlb_entries = 0;
+ unsigned long nr_base_pages;
preempt_disable();
if (current->active_mm != mm)
tlb_entries = tlb_lli_4k[ENTRIES];
else
tlb_entries = tlb_lld_4k[ENTRIES];
+
/* Assume all of TLB entries was occupied by this task */
- act_entries = mm->total_vm > tlb_entries ? tlb_entries : mm->total_vm;
+ act_entries = tlb_entries >> tlb_flushall_shift;
+ act_entries = mm->total_vm > act_entries ? act_entries : mm->total_vm;
+ nr_base_pages = (end - start) >> PAGE_SHIFT;
/* tlb_flushall_shift is on balance point, details in commit log */
- if ((end - start) >> PAGE_SHIFT > act_entries >> tlb_flushall_shift) {
- count_vm_event(NR_TLB_LOCAL_FLUSH_ALL);
+ if (nr_base_pages > act_entries) {
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
local_flush_tlb();
} else {
- if (has_large_page(mm, start, end)) {
- local_flush_tlb();
- goto flush_all;
- }
/* flush range by one by one 'invlpg' */
for (addr = start; addr < end; addr += PAGE_SIZE) {
- count_vm_event(NR_TLB_LOCAL_FLUSH_ONE);
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
__flush_tlb_single(addr);
}
static void do_flush_tlb_all(void *info)
{
- count_vm_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
+ count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED);
__flush_tlb_all();
if (this_cpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY)
leave_mm(smp_processor_id());
void flush_tlb_all(void)
{
- count_vm_event(NR_TLB_REMOTE_FLUSH);
+ count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
on_each_cpu(do_flush_tlb_all, NULL, 1);
}
if (bgrt_tab->header.length < sizeof(*bgrt_tab))
return;
- if (bgrt_tab->version != 1)
+ if (bgrt_tab->version != 1 || bgrt_tab->status != 1)
return;
if (bgrt_tab->image_type != 0 || !bgrt_tab->image_address)
return;
image = efi_lookup_mapped_addr(bgrt_tab->image_address);
if (!image) {
- image = ioremap(bgrt_tab->image_address, sizeof(bmp_header));
+ image = early_memremap(bgrt_tab->image_address,
+ sizeof(bmp_header));
ioremapped = true;
if (!image)
return;
memcpy_fromio(&bmp_header, image, sizeof(bmp_header));
if (ioremapped)
- iounmap(image);
+ early_iounmap(image, sizeof(bmp_header));
bgrt_image_size = bmp_header.size;
bgrt_image = kmalloc(bgrt_image_size, GFP_KERNEL);
return;
if (ioremapped) {
- image = ioremap(bgrt_tab->image_address, bmp_header.size);
+ image = early_memremap(bgrt_tab->image_address,
+ bmp_header.size);
if (!image) {
kfree(bgrt_image);
bgrt_image = NULL;
memcpy_fromio(bgrt_image, image, bgrt_image_size);
if (ioremapped)
- iounmap(image);
+ early_iounmap(image, bmp_header.size);
}
set_memory_nx(addr, npages);
}
-static void __init runtime_code_page_mkexec(void)
+void __init runtime_code_page_mkexec(void)
{
efi_memory_desc_t *md;
void *p;
efi.update_capsule = virt_efi_update_capsule;
efi.query_capsule_caps = virt_efi_query_capsule_caps;
- if (efi_enabled(EFI_OLD_MEMMAP) && (__supported_pte_mask & _PAGE_NX))
- runtime_code_page_mkexec();
+ efi_runtime_mkexec();
kfree(new_memmap);
local_irq_restore(efi_rt_eflags);
}
+
+void __init efi_runtime_mkexec(void)
+{
+ if (__supported_pte_mask & _PAGE_NX)
+ runtime_code_page_mkexec();
+}
{
efi_setup = phys_addr + sizeof(struct setup_data);
}
+
+void __init efi_runtime_mkexec(void)
+{
+ if (!efi_enabled(EFI_OLD_MEMMAP))
+ return;
+
+ if (__supported_pte_mask & _PAGE_NX)
+ runtime_code_page_mkexec();
+}
* X86_CR0_TS, X86_CR0_PE, X86_CR0_ET are set by Xen for HVM guests
* (which PVH shared codepaths), while X86_CR0_PG is for PVH. */
write_cr0(read_cr0() | X86_CR0_MP | X86_CR0_NE | X86_CR0_WP | X86_CR0_AM);
+
+ if (!cpu)
+ return;
+ /*
+ * For BSP, PSE PGE are set in probe_page_size_mask(), for APs
+ * set them here. For all, OSFXSR OSXMMEXCPT are set in fpu_init.
+ */
+ if (cpu_has_pse)
+ set_in_cr4(X86_CR4_PSE);
+
+ if (cpu_has_pge)
+ set_in_cr4(X86_CR4_PGE);
}
/*
/* Assume pteval_t is equivalent to all the other *val_t types. */
static pteval_t pte_mfn_to_pfn(pteval_t val)
{
- if (val & _PAGE_PRESENT) {
+ if (pteval_present(val)) {
unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
unsigned long pfn = mfn_to_pfn(mfn);
static pteval_t pte_pfn_to_mfn(pteval_t val)
{
- if (val & _PAGE_PRESENT) {
+ if (pteval_present(val)) {
unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
pteval_t flags = val & PTE_FLAGS_MASK;
unsigned long mfn;
"m2p_add_override: pfn %lx not mapped", pfn))
return -EINVAL;
}
+ WARN_ON(PagePrivate(page));
+ SetPagePrivate(page);
+ set_page_private(page, mfn);
+ page->index = pfn_to_mfn(pfn);
+
+ if (unlikely(!set_phys_to_machine(pfn, FOREIGN_FRAME(mfn))))
+ return -ENOMEM;
if (kmap_op != NULL) {
if (!PageHighMem(page)) {
}
EXPORT_SYMBOL_GPL(m2p_add_override);
int m2p_remove_override(struct page *page,
- struct gnttab_map_grant_ref *kmap_op,
- unsigned long mfn)
+ struct gnttab_map_grant_ref *kmap_op)
{
unsigned long flags;
+ unsigned long mfn;
unsigned long pfn;
unsigned long uninitialized_var(address);
unsigned level;
pte_t *ptep = NULL;
pfn = page_to_pfn(page);
+ mfn = get_phys_to_machine(pfn);
+ if (mfn == INVALID_P2M_ENTRY || !(mfn & FOREIGN_FRAME_BIT))
+ return -EINVAL;
if (!PageHighMem(page)) {
address = (unsigned long)__va(pfn << PAGE_SHIFT);
spin_lock_irqsave(&m2p_override_lock, flags);
list_del(&page->lru);
spin_unlock_irqrestore(&m2p_override_lock, flags);
+ WARN_ON(!PagePrivate(page));
+ ClearPagePrivate(page);
+ set_phys_to_machine(pfn, page->index);
if (kmap_op != NULL) {
if (!PageHighMem(page)) {
struct multicall_space mcs;
if (!uninit_q)
return NULL;
+ uninit_q->flush_rq = kzalloc(sizeof(struct request), GFP_KERNEL);
+ if (!uninit_q->flush_rq)
+ goto out_cleanup_queue;
+
q = blk_init_allocated_queue(uninit_q, rfn, lock);
if (!q)
- blk_cleanup_queue(uninit_q);
-
+ goto out_free_flush_rq;
return q;
+
+out_free_flush_rq:
+ kfree(uninit_q->flush_rq);
+out_cleanup_queue:
+ blk_cleanup_queue(uninit_q);
+ return NULL;
}
EXPORT_SYMBOL(blk_init_queue_node);
struct request *blk_get_request(struct request_queue *q, int rw, gfp_t gfp_mask)
{
if (q->mq_ops)
- return blk_mq_alloc_request(q, rw, gfp_mask, false);
+ return blk_mq_alloc_request(q, rw, gfp_mask);
else
return blk_old_get_request(q, rw, gfp_mask);
}
if (unlikely(!q))
return;
+ if (q->mq_ops) {
+ blk_mq_free_request(req);
+ return;
+ }
+
blk_pm_put_request(req);
elv_completed_request(q, req);
* be resued after dying flag is set
*/
if (q->mq_ops) {
- blk_mq_insert_request(q, rq, true);
+ blk_mq_insert_request(q, rq, at_head, true);
return;
}
blk_clear_rq_complete(rq);
}
-static void mq_flush_data_run(struct work_struct *work)
+static void mq_flush_run(struct work_struct *work)
{
struct request *rq;
- rq = container_of(work, struct request, mq_flush_data);
+ rq = container_of(work, struct request, mq_flush_work);
memset(&rq->csd, 0, sizeof(rq->csd));
blk_mq_run_request(rq, true, false);
}
-static void blk_mq_flush_data_insert(struct request *rq)
+static bool blk_flush_queue_rq(struct request *rq)
{
- INIT_WORK(&rq->mq_flush_data, mq_flush_data_run);
- kblockd_schedule_work(rq->q, &rq->mq_flush_data);
+ if (rq->q->mq_ops) {
+ INIT_WORK(&rq->mq_flush_work, mq_flush_run);
+ kblockd_schedule_work(rq->q, &rq->mq_flush_work);
+ return false;
+ } else {
+ list_add_tail(&rq->queuelist, &rq->q->queue_head);
+ return true;
+ }
}
/**
case REQ_FSEQ_DATA:
list_move_tail(&rq->flush.list, &q->flush_data_in_flight);
- if (q->mq_ops)
- blk_mq_flush_data_insert(rq);
- else {
- list_add(&rq->queuelist, &q->queue_head);
- queued = true;
- }
+ queued = blk_flush_queue_rq(rq);
break;
case REQ_FSEQ_DONE:
}
kicked = blk_kick_flush(q);
- /* blk_mq_run_flush will run queue */
- if (q->mq_ops)
- return queued;
return kicked | queued;
}
struct request *rq, *n;
unsigned long flags = 0;
- if (q->mq_ops) {
- blk_mq_free_request(flush_rq);
+ if (q->mq_ops)
spin_lock_irqsave(&q->mq_flush_lock, flags);
- }
+
running = &q->flush_queue[q->flush_running_idx];
BUG_ON(q->flush_pending_idx == q->flush_running_idx);
* kblockd.
*/
if (queued || q->flush_queue_delayed) {
- if (!q->mq_ops)
- blk_run_queue_async(q);
- else
- /*
- * This can be optimized to only run queues with requests
- * queued if necessary.
- */
- blk_mq_run_queues(q, true);
+ WARN_ON(q->mq_ops);
+ blk_run_queue_async(q);
}
q->flush_queue_delayed = 0;
if (q->mq_ops)
spin_unlock_irqrestore(&q->mq_flush_lock, flags);
}
-static void mq_flush_work(struct work_struct *work)
-{
- struct request_queue *q;
- struct request *rq;
-
- q = container_of(work, struct request_queue, mq_flush_work);
-
- /* We don't need set REQ_FLUSH_SEQ, it's for consistency */
- rq = blk_mq_alloc_request(q, WRITE_FLUSH|REQ_FLUSH_SEQ,
- __GFP_WAIT|GFP_ATOMIC, true);
- rq->cmd_type = REQ_TYPE_FS;
- rq->end_io = flush_end_io;
-
- blk_mq_run_request(rq, true, false);
-}
-
-/*
- * We can't directly use q->flush_rq, because it doesn't have tag and is not in
- * hctx->rqs[]. so we must allocate a new request, since we can't sleep here,
- * so offload the work to workqueue.
- *
- * Note: we assume a flush request finished in any hardware queue will flush
- * the whole disk cache.
- */
-static void mq_run_flush(struct request_queue *q)
-{
- kblockd_schedule_work(q, &q->mq_flush_work);
-}
-
/**
* blk_kick_flush - consider issuing flush request
* @q: request_queue being kicked
* different from running_idx, which means flush is in flight.
*/
q->flush_pending_idx ^= 1;
+
if (q->mq_ops) {
- mq_run_flush(q);
- return true;
+ struct blk_mq_ctx *ctx = first_rq->mq_ctx;
+ struct blk_mq_hw_ctx *hctx = q->mq_ops->map_queue(q, ctx->cpu);
+
+ blk_mq_rq_init(hctx, q->flush_rq);
+ q->flush_rq->mq_ctx = ctx;
+
+ /*
+ * Reuse the tag value from the fist waiting request,
+ * with blk-mq the tag is generated during request
+ * allocation and drivers can rely on it being inside
+ * the range they asked for.
+ */
+ q->flush_rq->tag = first_rq->tag;
+ } else {
+ blk_rq_init(q, q->flush_rq);
}
- blk_rq_init(q, &q->flush_rq);
- q->flush_rq.cmd_type = REQ_TYPE_FS;
- q->flush_rq.cmd_flags = WRITE_FLUSH | REQ_FLUSH_SEQ;
- q->flush_rq.rq_disk = first_rq->rq_disk;
- q->flush_rq.end_io = flush_end_io;
+ q->flush_rq->cmd_type = REQ_TYPE_FS;
+ q->flush_rq->cmd_flags = WRITE_FLUSH | REQ_FLUSH_SEQ;
+ q->flush_rq->rq_disk = first_rq->rq_disk;
+ q->flush_rq->end_io = flush_end_io;
- list_add_tail(&q->flush_rq.queuelist, &q->queue_head);
- return true;
+ return blk_flush_queue_rq(q->flush_rq);
}
static void flush_data_end_io(struct request *rq, int error)
void blk_mq_init_flush(struct request_queue *q)
{
spin_lock_init(&q->mq_flush_lock);
- INIT_WORK(&q->mq_flush_work, mq_flush_work);
}
atomic_inc(&bb.done);
submit_bio(type, bio);
+
+ /*
+ * We can loop for a long time in here, if someone does
+ * full device discards (like mkfs). Be nice and allow
+ * us to schedule out to avoid softlocking if preempt
+ * is disabled.
+ */
+ cond_resched();
}
blk_finish_plug(&plug);
if (!bio)
return 0;
+ /*
+ * This should probably be returning 0, but blk_add_request_payload()
+ * (Christoph!!!!)
+ */
+ if (bio->bi_rw & REQ_DISCARD)
+ return 1;
+
+ if (bio->bi_rw & REQ_WRITE_SAME)
+ return 1;
+
fbio = bio;
cluster = blk_queue_cluster(q);
seg_size = 0;
*bvprv = *bvec;
}
-/*
- * map a request to scatterlist, return number of sg entries setup. Caller
- * must make sure sg can hold rq->nr_phys_segments entries
- */
-int blk_rq_map_sg(struct request_queue *q, struct request *rq,
- struct scatterlist *sglist)
+static int __blk_bios_map_sg(struct request_queue *q, struct bio *bio,
+ struct scatterlist *sglist,
+ struct scatterlist **sg)
{
struct bio_vec bvec, bvprv = { NULL };
- struct req_iterator iter;
- struct scatterlist *sg;
+ struct bvec_iter iter;
int nsegs, cluster;
nsegs = 0;
cluster = blk_queue_cluster(q);
- /*
- * for each bio in rq
- */
- sg = NULL;
- rq_for_each_segment(bvec, rq, iter) {
- __blk_segment_map_sg(q, &bvec, sglist, &bvprv, &sg,
- &nsegs, &cluster);
- } /* segments in rq */
+ if (bio->bi_rw & REQ_DISCARD) {
+ /*
+ * This is a hack - drivers should be neither modifying the
+ * biovec, nor relying on bi_vcnt - but because of
+ * blk_add_request_payload(), a discard bio may or may not have
+ * a payload we need to set up here (thank you Christoph) and
+ * bi_vcnt is really the only way of telling if we need to.
+ */
+
+ if (bio->bi_vcnt)
+ goto single_segment;
+
+ return 0;
+ }
+
+ if (bio->bi_rw & REQ_WRITE_SAME) {
+single_segment:
+ *sg = sglist;
+ bvec = bio_iovec(bio);
+ sg_set_page(*sg, bvec.bv_page, bvec.bv_len, bvec.bv_offset);
+ return 1;
+ }
+
+ for_each_bio(bio)
+ bio_for_each_segment(bvec, bio, iter)
+ __blk_segment_map_sg(q, &bvec, sglist, &bvprv, sg,
+ &nsegs, &cluster);
+ return nsegs;
+}
+
+/*
+ * map a request to scatterlist, return number of sg entries setup. Caller
+ * must make sure sg can hold rq->nr_phys_segments entries
+ */
+int blk_rq_map_sg(struct request_queue *q, struct request *rq,
+ struct scatterlist *sglist)
+{
+ struct scatterlist *sg = NULL;
+ int nsegs = 0;
+
+ if (rq->bio)
+ nsegs = __blk_bios_map_sg(q, rq->bio, sglist, &sg);
if (unlikely(rq->cmd_flags & REQ_COPY_USER) &&
(blk_rq_bytes(rq) & q->dma_pad_mask)) {
int blk_bio_map_sg(struct request_queue *q, struct bio *bio,
struct scatterlist *sglist)
{
- struct bio_vec bvec, bvprv = { NULL };
- struct scatterlist *sg;
- int nsegs, cluster;
- struct bvec_iter iter;
-
- nsegs = 0;
- cluster = blk_queue_cluster(q);
-
- sg = NULL;
- bio_for_each_segment(bvec, bio, iter) {
- __blk_segment_map_sg(q, &bvec, sglist, &bvprv, &sg,
- &nsegs, &cluster);
- } /* segments in bio */
+ struct scatterlist *sg = NULL;
+ int nsegs;
+ struct bio *next = bio->bi_next;
+ bio->bi_next = NULL;
+ nsegs = __blk_bios_map_sg(q, bio, sglist, &sg);
+ bio->bi_next = next;
if (sg)
sg_mark_end(sg);
ssize_t blk_mq_tag_sysfs_show(struct blk_mq_tags *tags, char *page)
{
char *orig_page = page;
- int cpu;
+ unsigned int cpu;
if (!tags)
return 0;
return rq;
}
-struct request *blk_mq_alloc_request(struct request_queue *q, int rw,
- gfp_t gfp, bool reserved)
+struct request *blk_mq_alloc_request(struct request_queue *q, int rw, gfp_t gfp)
{
struct request *rq;
if (blk_mq_queue_enter(q))
return NULL;
- rq = blk_mq_alloc_request_pinned(q, rw, gfp, reserved);
+ rq = blk_mq_alloc_request_pinned(q, rw, gfp, false);
if (rq)
blk_mq_put_ctx(rq->mq_ctx);
return rq;
/*
* Re-init and set pdu, if we have it
*/
-static void blk_mq_rq_init(struct blk_mq_hw_ctx *hctx, struct request *rq)
+void blk_mq_rq_init(struct blk_mq_hw_ctx *hctx, struct request *rq)
{
blk_rq_init(hctx->queue, rq);
bio_endio(bio, error);
}
-void blk_mq_complete_request(struct request *rq, int error)
+void blk_mq_end_io(struct request *rq, int error)
{
struct bio *bio = rq->bio;
unsigned int bytes = 0;
else
blk_mq_free_request(rq);
}
+EXPORT_SYMBOL(blk_mq_end_io);
-void __blk_mq_end_io(struct request *rq, int error)
-{
- if (!blk_mark_rq_complete(rq))
- blk_mq_complete_request(rq, error);
-}
-
-static void blk_mq_end_io_remote(void *data)
+static void __blk_mq_complete_request_remote(void *data)
{
struct request *rq = data;
- __blk_mq_end_io(rq, rq->errors);
+ rq->q->softirq_done_fn(rq);
}
-/*
- * End IO on this request on a multiqueue enabled driver. We'll either do
- * it directly inline, or punt to a local IPI handler on the matching
- * remote CPU.
- */
-void blk_mq_end_io(struct request *rq, int error)
+void __blk_mq_complete_request(struct request *rq)
{
struct blk_mq_ctx *ctx = rq->mq_ctx;
int cpu;
- if (!ctx->ipi_redirect)
- return __blk_mq_end_io(rq, error);
+ if (!ctx->ipi_redirect) {
+ rq->q->softirq_done_fn(rq);
+ return;
+ }
cpu = get_cpu();
if (cpu != ctx->cpu && cpu_online(ctx->cpu)) {
- rq->errors = error;
- rq->csd.func = blk_mq_end_io_remote;
+ rq->csd.func = __blk_mq_complete_request_remote;
rq->csd.info = rq;
rq->csd.flags = 0;
__smp_call_function_single(ctx->cpu, &rq->csd, 0);
} else {
- __blk_mq_end_io(rq, error);
+ rq->q->softirq_done_fn(rq);
}
put_cpu();
}
-EXPORT_SYMBOL(blk_mq_end_io);
-static void blk_mq_start_request(struct request *rq)
+/**
+ * blk_mq_complete_request - end I/O on a request
+ * @rq: the request being processed
+ *
+ * Description:
+ * Ends all I/O on a request. It does not handle partial completions.
+ * The actual completion happens out-of-order, through a IPI handler.
+ **/
+void blk_mq_complete_request(struct request *rq)
+{
+ if (unlikely(blk_should_fake_timeout(rq->q)))
+ return;
+ if (!blk_mark_rq_complete(rq))
+ __blk_mq_complete_request(rq);
+}
+EXPORT_SYMBOL(blk_mq_complete_request);
+
+static void blk_mq_start_request(struct request *rq, bool last)
{
struct request_queue *q = rq->q;
*/
rq->deadline = jiffies + q->rq_timeout;
set_bit(REQ_ATOM_STARTED, &rq->atomic_flags);
+
+ if (q->dma_drain_size && blk_rq_bytes(rq)) {
+ /*
+ * Make sure space for the drain appears. We know we can do
+ * this because max_hw_segments has been adjusted to be one
+ * fewer than the device can handle.
+ */
+ rq->nr_phys_segments++;
+ }
+
+ /*
+ * Flag the last request in the series so that drivers know when IO
+ * should be kicked off, if they don't do it on a per-request basis.
+ *
+ * Note: the flag isn't the only condition drivers should do kick off.
+ * If drive is busy, the last request might not have the bit set.
+ */
+ if (last)
+ rq->cmd_flags |= REQ_END;
}
static void blk_mq_requeue_request(struct request *rq)
trace_block_rq_requeue(q, rq);
clear_bit(REQ_ATOM_STARTED, &rq->atomic_flags);
+
+ rq->cmd_flags &= ~REQ_END;
+
+ if (q->dma_drain_size && blk_rq_bytes(rq))
+ rq->nr_phys_segments--;
}
struct blk_mq_timeout_data {
rq = list_first_entry(&rq_list, struct request, queuelist);
list_del_init(&rq->queuelist);
- blk_mq_start_request(rq);
- /*
- * Last request in the series. Flag it as such, this
- * enables drivers to know when IO should be kicked off,
- * if they don't do it on a per-request basis.
- *
- * Note: the flag isn't the only condition drivers
- * should do kick off. If drive is busy, the last
- * request might not have the bit set.
- */
- if (list_empty(&rq_list))
- rq->cmd_flags |= REQ_END;
+ blk_mq_start_request(rq, list_empty(&rq_list));
ret = q->mq_ops->queue_rq(hctx, rq);
switch (ret) {
break;
default:
pr_err("blk-mq: bad return on queue: %d\n", ret);
- rq->errors = -EIO;
case BLK_MQ_RQ_QUEUE_ERROR:
+ rq->errors = -EIO;
blk_mq_end_io(rq, rq->errors);
break;
}
}
static void __blk_mq_insert_request(struct blk_mq_hw_ctx *hctx,
- struct request *rq)
+ struct request *rq, bool at_head)
{
struct blk_mq_ctx *ctx = rq->mq_ctx;
trace_block_rq_insert(hctx->queue, rq);
- list_add_tail(&rq->queuelist, &ctx->rq_list);
+ if (at_head)
+ list_add(&rq->queuelist, &ctx->rq_list);
+ else
+ list_add_tail(&rq->queuelist, &ctx->rq_list);
blk_mq_hctx_mark_pending(hctx, ctx);
/*
}
void blk_mq_insert_request(struct request_queue *q, struct request *rq,
- bool run_queue)
+ bool at_head, bool run_queue)
{
struct blk_mq_hw_ctx *hctx;
struct blk_mq_ctx *ctx, *current_ctx;
rq->mq_ctx = ctx;
}
spin_lock(&ctx->lock);
- __blk_mq_insert_request(hctx, rq);
+ __blk_mq_insert_request(hctx, rq, at_head);
spin_unlock(&ctx->lock);
blk_mq_put_ctx(current_ctx);
/* ctx->cpu might be offline */
spin_lock(&ctx->lock);
- __blk_mq_insert_request(hctx, rq);
+ __blk_mq_insert_request(hctx, rq, false);
spin_unlock(&ctx->lock);
blk_mq_put_ctx(current_ctx);
rq = list_first_entry(list, struct request, queuelist);
list_del_init(&rq->queuelist);
rq->mq_ctx = ctx;
- __blk_mq_insert_request(hctx, rq);
+ __blk_mq_insert_request(hctx, rq, false);
}
spin_unlock(&ctx->lock);
blk_queue_bounce(q, &bio);
+ if (bio_integrity_enabled(bio) && bio_integrity_prep(bio)) {
+ bio_endio(bio, -EIO);
+ return;
+ }
+
if (use_plug && blk_attempt_plug_merge(q, bio, &request_count))
return;
__blk_mq_free_request(hctx, ctx, rq);
else {
blk_mq_bio_to_request(rq, bio);
- __blk_mq_insert_request(hctx, rq);
+ __blk_mq_insert_request(hctx, rq, false);
}
spin_unlock(&ctx->lock);
reg->queue_depth = BLK_MQ_MAX_DEPTH;
}
- /*
- * Set aside a tag for flush requests. It will only be used while
- * another flush request is in progress but outside the driver.
- *
- * TODO: only allocate if flushes are supported
- */
- reg->queue_depth++;
- reg->reserved_tags++;
-
if (reg->queue_depth < (reg->reserved_tags + BLK_MQ_TAG_MIN))
return ERR_PTR(-EINVAL);
q->mq_ops = reg->ops;
q->queue_flags |= QUEUE_FLAG_MQ_DEFAULT;
+ q->sg_reserved_size = INT_MAX;
+
blk_queue_make_request(q, blk_mq_make_request);
blk_queue_rq_timed_out(q, reg->ops->timeout);
if (reg->timeout)
blk_queue_rq_timeout(q, reg->timeout);
+ if (reg->ops->complete)
+ blk_queue_softirq_done(q, reg->ops->complete);
+
blk_mq_init_flush(q);
blk_mq_init_cpu_queues(q, reg->nr_hw_queues);
- if (blk_mq_init_hw_queues(q, reg, driver_data))
+ q->flush_rq = kzalloc(round_up(sizeof(struct request) + reg->cmd_size,
+ cache_line_size()), GFP_KERNEL);
+ if (!q->flush_rq)
goto err_hw;
+ if (blk_mq_init_hw_queues(q, reg, driver_data))
+ goto err_flush_rq;
+
blk_mq_map_swqueue(q);
mutex_lock(&all_q_mutex);
mutex_unlock(&all_q_mutex);
return q;
+
+err_flush_rq:
+ kfree(q->flush_rq);
err_hw:
kfree(q->mq_map);
err_map:
struct kobject kobj;
};
-void __blk_mq_end_io(struct request *rq, int error);
-void blk_mq_complete_request(struct request *rq, int error);
+void __blk_mq_complete_request(struct request *rq);
void blk_mq_run_request(struct request *rq, bool run_queue, bool async);
void blk_mq_run_hw_queue(struct blk_mq_hw_ctx *hctx, bool async);
void blk_mq_init_flush(struct request_queue *q);
void blk_mq_drain_queue(struct request_queue *q);
void blk_mq_free_queue(struct request_queue *q);
+void blk_mq_rq_init(struct blk_mq_hw_ctx *hctx, struct request *rq);
/*
* CPU hotplug helpers
if (q->mq_ops)
blk_mq_free_queue(q);
+ kfree(q->flush_rq);
+
blk_trace_shutdown(q);
bdi_destroy(&q->backing_dev_info);
case BLK_EH_HANDLED:
/* Can we use req->errors here? */
if (q->mq_ops)
- blk_mq_complete_request(req, req->errors);
+ __blk_mq_complete_request(req);
else
__blk_complete_request(req);
break;
q->flush_queue_delayed = 1;
return NULL;
}
- if (unlikely(blk_queue_dying(q)) ||
+ if (unlikely(blk_queue_bypass(q)) ||
!q->elevator->type->ops.elevator_dispatch_fn(q, 0))
return NULL;
}
{
unsigned long x;
struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev));
- if (sscanf(buf, "%ld\n", &x) == 1)
+ if (sscanf(buf, "%lu\n", &x) == 1)
battery->alarm = x/1000;
if (acpi_battery_present(battery))
acpi_battery_set_alarm(battery);
ACPI_COMPANION_SET(dev, adev);
dev->release = acpi_container_release;
ret = device_register(dev);
- if (ret)
+ if (ret) {
+ put_device(dev);
return ret;
-
+ }
adev->driver_data = dev;
return 1;
}
static void dock_notify(struct dock_station *ds, u32 event)
{
acpi_handle handle = ds->handle;
- struct acpi_device *ad;
+ struct acpi_device *adev = NULL;
int surprise_removal = 0;
/*
switch (event) {
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
- if (!dock_in_progress(ds) && acpi_bus_get_device(handle, &ad)) {
+ acpi_bus_get_device(handle, &adev);
+ if (!dock_in_progress(ds) && !acpi_device_enumerated(adev)) {
begin_dock(ds);
dock(ds);
if (!dock_present(ds)) {
seq_printf(seq, "%c%-8s %s:%s\n",
dev->wakeup.flags.run_wake ? '*' : ' ',
(device_may_wakeup(&dev->dev) ||
- (ldev && device_may_wakeup(ldev))) ?
+ device_may_wakeup(ldev)) ?
"enabled" : "disabled",
ldev->bus ? ldev->bus->name :
"no-bus", dev_name(ldev));
static void acpi_hotplug_notify_cb(acpi_handle handle, u32 type, void *data)
{
u32 ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE;
- struct acpi_scan_handler *handler = data;
struct acpi_device *adev;
acpi_status status;
break;
case ACPI_NOTIFY_EJECT_REQUEST:
acpi_handle_debug(handle, "ACPI_NOTIFY_EJECT_REQUEST event\n");
- if (!handler->hotplug.enabled) {
+ if (!adev->handler)
+ goto err_out;
+
+ if (!adev->handler->hotplug.enabled) {
acpi_handle_err(handle, "Eject disabled\n");
ost_code = ACPI_OST_SC_EJECT_NOT_SUPPORTED;
goto err_out;
union acpi_object *element = &(package->package.elements[i]);
- if (!element) {
- return AE_BAD_DATA;
- }
-
switch (element->type) {
case ACPI_TYPE_INTEGER:
},
{
.callback = video_detect_force_vendor,
+ .ident = "HP EliteBook Revolve 810",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook Revolve 810 G1"),
+ },
+ },
+ {
+ .callback = video_detect_force_vendor,
.ident = "Lenovo Yoga 13",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
ahb->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(ahb->regs))
return PTR_ERR(ahb->regs);
clk_prepare_enable(hpriv->port_clks[port]);
sprintf(port_number, "port%d", port);
- hpriv->port_phys[port] = devm_phy_get(&pdev->dev, port_number);
+ hpriv->port_phys[port] = devm_phy_optional_get(&pdev->dev,
+ port_number);
if (IS_ERR(hpriv->port_phys[port])) {
rc = PTR_ERR(hpriv->port_phys[port]);
hpriv->port_phys[port] = NULL;
- if ((rc != -EPROBE_DEFER) && (rc != -ENODEV))
- dev_warn(&pdev->dev, "error getting phy");
+ if (rc != -EPROBE_DEFER)
+ dev_warn(&pdev->dev, "error getting phy %d",
+ rc);
goto err;
} else
phy_power_on(hpriv->port_phys[port]);
goto out;
}
+ if (!devres_open_group(master->dev, NULL, GFP_KERNEL)) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
/* Found all components */
ret = master->ops->bind(master->dev);
if (ret < 0) {
+ devres_release_group(master->dev, NULL);
+ dev_info(master->dev, "master bind failed: %d\n", ret);
master_remove_components(master);
goto out;
}
{
if (master->bound) {
master->ops->unbind(master->dev);
+ devres_release_group(master->dev, NULL);
master->bound = false;
}
if (ret)
return ret;
- seq_printf(s, "\nDma-buf Objects:\n");
- seq_printf(s, "\texp_name\tsize\tflags\tmode\tcount\n");
+ seq_puts(s, "\nDma-buf Objects:\n");
+ seq_puts(s, "size\tflags\tmode\tcount\texp_name\n");
list_for_each_entry(buf_obj, &db_list.head, list_node) {
ret = mutex_lock_interruptible(&buf_obj->lock);
if (ret) {
- seq_printf(s,
- "\tERROR locking buffer object: skipping\n");
+ seq_puts(s,
+ "\tERROR locking buffer object: skipping\n");
continue;
}
- seq_printf(s, "\t");
-
- seq_printf(s, "\t%s\t%08zu\t%08x\t%08x\t%08ld\n",
- buf_obj->exp_name, buf_obj->size,
+ seq_printf(s, "%08zu\t%08x\t%08x\t%08ld\t%s\n",
+ buf_obj->size,
buf_obj->file->f_flags, buf_obj->file->f_mode,
- (long)(buf_obj->file->f_count.counter));
+ (long)(buf_obj->file->f_count.counter),
+ buf_obj->exp_name);
- seq_printf(s, "\t\tAttached Devices:\n");
+ seq_puts(s, "\tAttached Devices:\n");
attach_count = 0;
list_for_each_entry(attach_obj, &buf_obj->attachments, node) {
- seq_printf(s, "\t\t");
+ seq_puts(s, "\t");
- seq_printf(s, "%s\n", attach_obj->dev->init_name);
+ seq_printf(s, "%s\n", dev_name(attach_obj->dev));
attach_count++;
}
- seq_printf(s, "\n\t\tTotal %d devices attached\n",
+ seq_printf(s, "Total %d devices attached\n\n",
attach_count);
count++;
NULL_IRQ_NONE = 0,
NULL_IRQ_SOFTIRQ = 1,
NULL_IRQ_TIMER = 2,
+};
+enum {
NULL_Q_BIO = 0,
NULL_Q_RQ = 1,
NULL_Q_MQ = 2,
static void end_cmd(struct nullb_cmd *cmd)
{
- if (cmd->rq) {
- if (queue_mode == NULL_Q_MQ)
- blk_mq_end_io(cmd->rq, 0);
- else {
- INIT_LIST_HEAD(&cmd->rq->queuelist);
- blk_end_request_all(cmd->rq, 0);
- }
- } else if (cmd->bio)
+ switch (queue_mode) {
+ case NULL_Q_MQ:
+ blk_mq_end_io(cmd->rq, 0);
+ return;
+ case NULL_Q_RQ:
+ INIT_LIST_HEAD(&cmd->rq->queuelist);
+ blk_end_request_all(cmd->rq, 0);
+ break;
+ case NULL_Q_BIO:
bio_endio(cmd->bio, 0);
+ break;
+ }
- if (queue_mode != NULL_Q_MQ)
- free_cmd(cmd);
+ free_cmd(cmd);
}
static enum hrtimer_restart null_cmd_timer_expired(struct hrtimer *timer)
cq = &per_cpu(completion_queues, smp_processor_id());
while ((entry = llist_del_all(&cq->list)) != NULL) {
+ entry = llist_reverse_order(entry);
do {
cmd = container_of(entry, struct nullb_cmd, ll_list);
end_cmd(cmd);
static void null_softirq_done_fn(struct request *rq)
{
- blk_end_request_all(rq, 0);
-}
-
-#ifdef CONFIG_SMP
-
-static void null_ipi_cmd_end_io(void *data)
-{
- struct completion_queue *cq;
- struct llist_node *entry, *next;
- struct nullb_cmd *cmd;
-
- cq = &per_cpu(completion_queues, smp_processor_id());
-
- entry = llist_del_all(&cq->list);
-
- while (entry) {
- next = entry->next;
- cmd = llist_entry(entry, struct nullb_cmd, ll_list);
- end_cmd(cmd);
- entry = next;
- }
-}
-
-static void null_cmd_end_ipi(struct nullb_cmd *cmd)
-{
- struct call_single_data *data = &cmd->csd;
- int cpu = get_cpu();
- struct completion_queue *cq = &per_cpu(completion_queues, cpu);
-
- cmd->ll_list.next = NULL;
-
- if (llist_add(&cmd->ll_list, &cq->list)) {
- data->func = null_ipi_cmd_end_io;
- data->flags = 0;
- __smp_call_function_single(cpu, data, 0);
- }
-
- put_cpu();
+ end_cmd(rq->special);
}
-#endif /* CONFIG_SMP */
-
static inline void null_handle_cmd(struct nullb_cmd *cmd)
{
/* Complete IO by inline, softirq or timer */
switch (irqmode) {
- case NULL_IRQ_NONE:
- end_cmd(cmd);
- break;
case NULL_IRQ_SOFTIRQ:
-#ifdef CONFIG_SMP
- null_cmd_end_ipi(cmd);
-#else
+ switch (queue_mode) {
+ case NULL_Q_MQ:
+ blk_mq_complete_request(cmd->rq);
+ break;
+ case NULL_Q_RQ:
+ blk_complete_request(cmd->rq);
+ break;
+ case NULL_Q_BIO:
+ /*
+ * XXX: no proper submitting cpu information available.
+ */
+ end_cmd(cmd);
+ break;
+ }
+ break;
+ case NULL_IRQ_NONE:
end_cmd(cmd);
-#endif
break;
case NULL_IRQ_TIMER:
null_cmd_end_timer(cmd);
.queue_rq = null_queue_rq,
.map_queue = blk_mq_map_queue,
.init_hctx = null_init_hctx,
+ .complete = null_softirq_done_fn,
};
static struct blk_mq_reg null_mq_reg = {
{
unsigned int i;
-#if !defined(CONFIG_SMP)
- if (irqmode == NULL_IRQ_SOFTIRQ) {
- pr_warn("null_blk: softirq completions not available.\n");
- pr_warn("null_blk: using direct completions.\n");
- irqmode = NULL_IRQ_NONE;
- }
-#endif
if (bs > PAGE_SIZE) {
pr_warn("null_blk: invalid block size\n");
pr_warn("null_blk: defaults block size to %lu\n", PAGE_SIZE);
#define NVME_Q_DEPTH 1024
#define SQ_SIZE(depth) (depth * sizeof(struct nvme_command))
#define CQ_SIZE(depth) (depth * sizeof(struct nvme_completion))
-#define NVME_MINORS 64
#define ADMIN_TIMEOUT (60 * HZ)
static int nvme_major;
static DEFINE_SPINLOCK(dev_list_lock);
static LIST_HEAD(dev_list);
static struct task_struct *nvme_thread;
+static struct workqueue_struct *nvme_workq;
+
+static void nvme_reset_failed_dev(struct work_struct *ws);
+
+struct async_cmd_info {
+ struct kthread_work work;
+ struct kthread_worker *worker;
+ u32 result;
+ int status;
+ void *ctx;
+};
/*
* An NVM Express queue. Each device has at least two (one for admin
struct nvme_queue {
struct device *q_dmadev;
struct nvme_dev *dev;
+ char irqname[24]; /* nvme4294967295-65535\0 */
spinlock_t q_lock;
struct nvme_command *sq_cmds;
volatile struct nvme_completion *cqes;
u16 sq_head;
u16 sq_tail;
u16 cq_head;
+ u16 qid;
u8 cq_phase;
u8 cqe_seen;
u8 q_suspended;
+ struct async_cmd_info cmdinfo;
unsigned long cmdid_data[];
};
BUILD_BUG_ON(sizeof(struct nvme_delete_queue) != 64);
BUILD_BUG_ON(sizeof(struct nvme_features) != 64);
BUILD_BUG_ON(sizeof(struct nvme_format_cmd) != 64);
+ BUILD_BUG_ON(sizeof(struct nvme_abort_cmd) != 64);
BUILD_BUG_ON(sizeof(struct nvme_command) != 64);
BUILD_BUG_ON(sizeof(struct nvme_id_ctrl) != 4096);
BUILD_BUG_ON(sizeof(struct nvme_id_ns) != 4096);
nvme_completion_fn fn;
void *ctx;
unsigned long timeout;
+ int aborted;
};
static struct nvme_cmd_info *nvme_cmd_info(struct nvme_queue *nvmeq)
info[cmdid].fn = handler;
info[cmdid].ctx = ctx;
info[cmdid].timeout = jiffies + timeout;
+ info[cmdid].aborted = 0;
return cmdid;
}
#define CMD_CTX_COMPLETED (0x310 + CMD_CTX_BASE)
#define CMD_CTX_INVALID (0x314 + CMD_CTX_BASE)
#define CMD_CTX_FLUSH (0x318 + CMD_CTX_BASE)
+#define CMD_CTX_ABORT (0x31C + CMD_CTX_BASE)
static void special_completion(struct nvme_dev *dev, void *ctx,
struct nvme_completion *cqe)
return;
if (ctx == CMD_CTX_FLUSH)
return;
+ if (ctx == CMD_CTX_ABORT) {
+ ++dev->abort_limit;
+ return;
+ }
if (ctx == CMD_CTX_COMPLETED) {
dev_warn(&dev->pci_dev->dev,
"completed id %d twice on queue %d\n",
dev_warn(&dev->pci_dev->dev, "Unknown special completion %p\n", ctx);
}
+static void async_completion(struct nvme_dev *dev, void *ctx,
+ struct nvme_completion *cqe)
+{
+ struct async_cmd_info *cmdinfo = ctx;
+ cmdinfo->result = le32_to_cpup(&cqe->result);
+ cmdinfo->status = le16_to_cpup(&cqe->status) >> 1;
+ queue_kthread_work(cmdinfo->worker, &cmdinfo->work);
+}
+
/*
* Called with local interrupts disabled and the q_lock held. May not sleep.
*/
if (head == nvmeq->cq_head && phase == nvmeq->cq_phase)
return 0;
- writel(head, nvmeq->q_db + (1 << nvmeq->dev->db_stride));
+ writel(head, nvmeq->q_db + nvmeq->dev->db_stride);
nvmeq->cq_head = head;
nvmeq->cq_phase = phase;
return cmdinfo.status;
}
+static int nvme_submit_async_cmd(struct nvme_queue *nvmeq,
+ struct nvme_command *cmd,
+ struct async_cmd_info *cmdinfo, unsigned timeout)
+{
+ int cmdid;
+
+ cmdid = alloc_cmdid_killable(nvmeq, cmdinfo, async_completion, timeout);
+ if (cmdid < 0)
+ return cmdid;
+ cmdinfo->status = -EINTR;
+ cmd->common.command_id = cmdid;
+ nvme_submit_cmd(nvmeq, cmd);
+ return 0;
+}
+
int nvme_submit_admin_cmd(struct nvme_dev *dev, struct nvme_command *cmd,
u32 *result)
{
return nvme_submit_sync_cmd(dev->queues[0], cmd, result, ADMIN_TIMEOUT);
}
+static int nvme_submit_admin_cmd_async(struct nvme_dev *dev,
+ struct nvme_command *cmd, struct async_cmd_info *cmdinfo)
+{
+ return nvme_submit_async_cmd(dev->queues[0], cmd, cmdinfo,
+ ADMIN_TIMEOUT);
+}
+
static int adapter_delete_queue(struct nvme_dev *dev, u8 opcode, u16 id)
{
int status;
return nvme_submit_admin_cmd(dev, &c, result);
}
+/**
+ * nvme_abort_cmd - Attempt aborting a command
+ * @cmdid: Command id of a timed out IO
+ * @queue: The queue with timed out IO
+ *
+ * Schedule controller reset if the command was already aborted once before and
+ * still hasn't been returned to the driver, or if this is the admin queue.
+ */
+static void nvme_abort_cmd(int cmdid, struct nvme_queue *nvmeq)
+{
+ int a_cmdid;
+ struct nvme_command cmd;
+ struct nvme_dev *dev = nvmeq->dev;
+ struct nvme_cmd_info *info = nvme_cmd_info(nvmeq);
+
+ if (!nvmeq->qid || info[cmdid].aborted) {
+ if (work_busy(&dev->reset_work))
+ return;
+ list_del_init(&dev->node);
+ dev_warn(&dev->pci_dev->dev,
+ "I/O %d QID %d timeout, reset controller\n", cmdid,
+ nvmeq->qid);
+ PREPARE_WORK(&dev->reset_work, nvme_reset_failed_dev);
+ queue_work(nvme_workq, &dev->reset_work);
+ return;
+ }
+
+ if (!dev->abort_limit)
+ return;
+
+ a_cmdid = alloc_cmdid(dev->queues[0], CMD_CTX_ABORT, special_completion,
+ ADMIN_TIMEOUT);
+ if (a_cmdid < 0)
+ return;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.abort.opcode = nvme_admin_abort_cmd;
+ cmd.abort.cid = cmdid;
+ cmd.abort.sqid = cpu_to_le16(nvmeq->qid);
+ cmd.abort.command_id = a_cmdid;
+
+ --dev->abort_limit;
+ info[cmdid].aborted = 1;
+ info[cmdid].timeout = jiffies + ADMIN_TIMEOUT;
+
+ dev_warn(nvmeq->q_dmadev, "Aborting I/O %d QID %d\n", cmdid,
+ nvmeq->qid);
+ nvme_submit_cmd(dev->queues[0], &cmd);
+}
+
/**
* nvme_cancel_ios - Cancel outstanding I/Os
* @queue: The queue to cancel I/Os on
continue;
if (info[cmdid].ctx == CMD_CTX_CANCELLED)
continue;
- dev_warn(nvmeq->q_dmadev, "Cancelling I/O %d\n", cmdid);
+ if (timeout && nvmeq->dev->initialized) {
+ nvme_abort_cmd(cmdid, nvmeq);
+ continue;
+ }
+ dev_warn(nvmeq->q_dmadev, "Cancelling I/O %d QID %d\n", cmdid,
+ nvmeq->qid);
ctx = cancel_cmdid(nvmeq, cmdid, &fn);
fn(nvmeq->dev, ctx, &cqe);
}
kfree(nvmeq);
}
-static void nvme_free_queues(struct nvme_dev *dev)
+static void nvme_free_queues(struct nvme_dev *dev, int lowest)
{
int i;
- for (i = dev->queue_count - 1; i >= 0; i--) {
+ for (i = dev->queue_count - 1; i >= lowest; i--) {
nvme_free_queue(dev->queues[i]);
dev->queue_count--;
dev->queues[i] = NULL;
}
}
-static void nvme_disable_queue(struct nvme_dev *dev, int qid)
+/**
+ * nvme_suspend_queue - put queue into suspended state
+ * @nvmeq - queue to suspend
+ *
+ * Returns 1 if already suspended, 0 otherwise.
+ */
+static int nvme_suspend_queue(struct nvme_queue *nvmeq)
{
- struct nvme_queue *nvmeq = dev->queues[qid];
- int vector = dev->entry[nvmeq->cq_vector].vector;
+ int vector = nvmeq->dev->entry[nvmeq->cq_vector].vector;
spin_lock_irq(&nvmeq->q_lock);
if (nvmeq->q_suspended) {
spin_unlock_irq(&nvmeq->q_lock);
- return;
+ return 1;
}
nvmeq->q_suspended = 1;
spin_unlock_irq(&nvmeq->q_lock);
irq_set_affinity_hint(vector, NULL);
free_irq(vector, nvmeq);
- /* Don't tell the adapter to delete the admin queue */
- if (qid) {
- adapter_delete_sq(dev, qid);
- adapter_delete_cq(dev, qid);
- }
+ return 0;
+}
+static void nvme_clear_queue(struct nvme_queue *nvmeq)
+{
spin_lock_irq(&nvmeq->q_lock);
nvme_process_cq(nvmeq);
nvme_cancel_ios(nvmeq, false);
spin_unlock_irq(&nvmeq->q_lock);
}
+static void nvme_disable_queue(struct nvme_dev *dev, int qid)
+{
+ struct nvme_queue *nvmeq = dev->queues[qid];
+
+ if (!nvmeq)
+ return;
+ if (nvme_suspend_queue(nvmeq))
+ return;
+
+ /* Don't tell the adapter to delete the admin queue.
+ * Don't tell a removed adapter to delete IO queues. */
+ if (qid && readl(&dev->bar->csts) != -1) {
+ adapter_delete_sq(dev, qid);
+ adapter_delete_cq(dev, qid);
+ }
+ nvme_clear_queue(nvmeq);
+}
+
static struct nvme_queue *nvme_alloc_queue(struct nvme_dev *dev, int qid,
int depth, int vector)
{
nvmeq->q_dmadev = dmadev;
nvmeq->dev = dev;
+ snprintf(nvmeq->irqname, sizeof(nvmeq->irqname), "nvme%dq%d",
+ dev->instance, qid);
spin_lock_init(&nvmeq->q_lock);
nvmeq->cq_head = 0;
nvmeq->cq_phase = 1;
init_waitqueue_head(&nvmeq->sq_full);
init_waitqueue_entry(&nvmeq->sq_cong_wait, nvme_thread);
bio_list_init(&nvmeq->sq_cong);
- nvmeq->q_db = &dev->dbs[qid << (dev->db_stride + 1)];
+ nvmeq->q_db = &dev->dbs[qid * 2 * dev->db_stride];
nvmeq->q_depth = depth;
nvmeq->cq_vector = vector;
+ nvmeq->qid = qid;
nvmeq->q_suspended = 1;
dev->queue_count++;
{
if (use_threaded_interrupts)
return request_threaded_irq(dev->entry[nvmeq->cq_vector].vector,
- nvme_irq_check, nvme_irq,
- IRQF_DISABLED | IRQF_SHARED,
+ nvme_irq_check, nvme_irq, IRQF_SHARED,
name, nvmeq);
return request_irq(dev->entry[nvmeq->cq_vector].vector, nvme_irq,
- IRQF_DISABLED | IRQF_SHARED, name, nvmeq);
+ IRQF_SHARED, name, nvmeq);
}
static void nvme_init_queue(struct nvme_queue *nvmeq, u16 qid)
nvmeq->sq_tail = 0;
nvmeq->cq_head = 0;
nvmeq->cq_phase = 1;
- nvmeq->q_db = &dev->dbs[qid << (dev->db_stride + 1)];
+ nvmeq->q_db = &dev->dbs[qid * 2 * dev->db_stride];
memset(nvmeq->cmdid_data, 0, extra);
memset((void *)nvmeq->cqes, 0, CQ_SIZE(nvmeq->q_depth));
nvme_cancel_ios(nvmeq, false);
if (result < 0)
goto release_cq;
- result = queue_request_irq(dev, nvmeq, "nvme");
+ result = queue_request_irq(dev, nvmeq, nvmeq->irqname);
if (result < 0)
goto release_sq;
- spin_lock(&nvmeq->q_lock);
+ spin_lock_irq(&nvmeq->q_lock);
nvme_init_queue(nvmeq, qid);
- spin_unlock(&nvmeq->q_lock);
+ spin_unlock_irq(&nvmeq->q_lock);
return result;
if (result)
return result;
- result = queue_request_irq(dev, nvmeq, "nvme admin");
+ result = queue_request_irq(dev, nvmeq, nvmeq->irqname);
if (result)
return result;
- spin_lock(&nvmeq->q_lock);
+ spin_lock_irq(&nvmeq->q_lock);
nvme_init_queue(nvmeq, 0);
- spin_unlock(&nvmeq->q_lock);
+ spin_unlock_irq(&nvmeq->q_lock);
return result;
}
}
}
+#ifdef CONFIG_COMPAT
+static int nvme_compat_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+{
+ struct nvme_ns *ns = bdev->bd_disk->private_data;
+
+ switch (cmd) {
+ case SG_IO:
+ return nvme_sg_io32(ns, arg);
+ }
+ return nvme_ioctl(bdev, mode, cmd, arg);
+}
+#else
+#define nvme_compat_ioctl NULL
+#endif
+
+static int nvme_open(struct block_device *bdev, fmode_t mode)
+{
+ struct nvme_ns *ns = bdev->bd_disk->private_data;
+ struct nvme_dev *dev = ns->dev;
+
+ kref_get(&dev->kref);
+ return 0;
+}
+
+static void nvme_free_dev(struct kref *kref);
+
+static void nvme_release(struct gendisk *disk, fmode_t mode)
+{
+ struct nvme_ns *ns = disk->private_data;
+ struct nvme_dev *dev = ns->dev;
+
+ kref_put(&dev->kref, nvme_free_dev);
+}
+
static const struct block_device_operations nvme_fops = {
.owner = THIS_MODULE,
.ioctl = nvme_ioctl,
- .compat_ioctl = nvme_ioctl,
+ .compat_ioctl = nvme_compat_ioctl,
+ .open = nvme_open,
+ .release = nvme_release,
};
static void nvme_resubmit_bios(struct nvme_queue *nvmeq)
static int nvme_kthread(void *data)
{
- struct nvme_dev *dev;
+ struct nvme_dev *dev, *next;
while (!kthread_should_stop()) {
set_current_state(TASK_INTERRUPTIBLE);
spin_lock(&dev_list_lock);
- list_for_each_entry(dev, &dev_list, node) {
+ list_for_each_entry_safe(dev, next, &dev_list, node) {
int i;
+ if (readl(&dev->bar->csts) & NVME_CSTS_CFS &&
+ dev->initialized) {
+ if (work_busy(&dev->reset_work))
+ continue;
+ list_del_init(&dev->node);
+ dev_warn(&dev->pci_dev->dev,
+ "Failed status, reset controller\n");
+ PREPARE_WORK(&dev->reset_work,
+ nvme_reset_failed_dev);
+ queue_work(nvme_workq, &dev->reset_work);
+ continue;
+ }
for (i = 0; i < dev->queue_count; i++) {
struct nvme_queue *nvmeq = dev->queues[i];
if (!nvmeq)
return 0;
}
-static DEFINE_IDA(nvme_index_ida);
-
-static int nvme_get_ns_idx(void)
-{
- int index, error;
-
- do {
- if (!ida_pre_get(&nvme_index_ida, GFP_KERNEL))
- return -1;
-
- spin_lock(&dev_list_lock);
- error = ida_get_new(&nvme_index_ida, &index);
- spin_unlock(&dev_list_lock);
- } while (error == -EAGAIN);
-
- if (error)
- index = -1;
- return index;
-}
-
-static void nvme_put_ns_idx(int index)
-{
- spin_lock(&dev_list_lock);
- ida_remove(&nvme_index_ida, index);
- spin_unlock(&dev_list_lock);
-}
-
static void nvme_config_discard(struct nvme_ns *ns)
{
u32 logical_block_size = queue_logical_block_size(ns->queue);
ns->dev = dev;
ns->queue->queuedata = ns;
- disk = alloc_disk(NVME_MINORS);
+ disk = alloc_disk(0);
if (!disk)
goto out_free_queue;
ns->ns_id = nsid;
blk_queue_max_hw_sectors(ns->queue, dev->max_hw_sectors);
disk->major = nvme_major;
- disk->minors = NVME_MINORS;
- disk->first_minor = NVME_MINORS * nvme_get_ns_idx();
+ disk->first_minor = 0;
disk->fops = &nvme_fops;
disk->private_data = ns;
disk->queue = ns->queue;
disk->driverfs_dev = &dev->pci_dev->dev;
+ disk->flags = GENHD_FL_EXT_DEVT;
sprintf(disk->disk_name, "nvme%dn%d", dev->instance, nsid);
set_capacity(disk, le64_to_cpup(&id->nsze) << (ns->lba_shift - 9));
return NULL;
}
-static void nvme_ns_free(struct nvme_ns *ns)
-{
- int index = ns->disk->first_minor / NVME_MINORS;
- put_disk(ns->disk);
- nvme_put_ns_idx(index);
- blk_cleanup_queue(ns->queue);
- kfree(ns);
-}
-
static int set_queue_count(struct nvme_dev *dev, int count)
{
int status;
static size_t db_bar_size(struct nvme_dev *dev, unsigned nr_io_queues)
{
- return 4096 + ((nr_io_queues + 1) << (dev->db_stride + 3));
+ return 4096 + ((nr_io_queues + 1) * 8 * dev->db_stride);
}
static int nvme_setup_io_queues(struct nvme_dev *dev)
{
+ struct nvme_queue *adminq = dev->queues[0];
struct pci_dev *pdev = dev->pci_dev;
int result, cpu, i, vecs, nr_io_queues, size, q_depth;
}
/* Deregister the admin queue's interrupt */
- free_irq(dev->entry[0].vector, dev->queues[0]);
+ free_irq(dev->entry[0].vector, adminq);
vecs = nr_io_queues;
for (i = 0; i < vecs; i++)
*/
nr_io_queues = vecs;
- result = queue_request_irq(dev, dev->queues[0], "nvme admin");
+ result = queue_request_irq(dev, adminq, adminq->irqname);
if (result) {
- dev->queues[0]->q_suspended = 1;
+ adminq->q_suspended = 1;
goto free_queues;
}
for (i = dev->queue_count - 1; i > nr_io_queues; i--) {
struct nvme_queue *nvmeq = dev->queues[i];
- spin_lock(&nvmeq->q_lock);
+ spin_lock_irq(&nvmeq->q_lock);
nvme_cancel_ios(nvmeq, false);
- spin_unlock(&nvmeq->q_lock);
+ spin_unlock_irq(&nvmeq->q_lock);
nvme_free_queue(nvmeq);
dev->queue_count--;
return 0;
free_queues:
- nvme_free_queues(dev);
+ nvme_free_queues(dev, 1);
return result;
}
*/
static int nvme_dev_add(struct nvme_dev *dev)
{
+ struct pci_dev *pdev = dev->pci_dev;
int res;
unsigned nn, i;
struct nvme_ns *ns;
dma_addr_t dma_addr;
int shift = NVME_CAP_MPSMIN(readq(&dev->bar->cap)) + 12;
- mem = dma_alloc_coherent(&dev->pci_dev->dev, 8192, &dma_addr,
- GFP_KERNEL);
+ mem = dma_alloc_coherent(&pdev->dev, 8192, &dma_addr, GFP_KERNEL);
if (!mem)
return -ENOMEM;
ctrl = mem;
nn = le32_to_cpup(&ctrl->nn);
dev->oncs = le16_to_cpup(&ctrl->oncs);
+ dev->abort_limit = ctrl->acl + 1;
memcpy(dev->serial, ctrl->sn, sizeof(ctrl->sn));
memcpy(dev->model, ctrl->mn, sizeof(ctrl->mn));
memcpy(dev->firmware_rev, ctrl->fr, sizeof(ctrl->fr));
if (ctrl->mdts)
dev->max_hw_sectors = 1 << (ctrl->mdts + shift - 9);
- if ((dev->pci_dev->vendor == PCI_VENDOR_ID_INTEL) &&
- (dev->pci_dev->device == 0x0953) && ctrl->vs[3])
+ if ((pdev->vendor == PCI_VENDOR_ID_INTEL) &&
+ (pdev->device == 0x0953) && ctrl->vs[3])
dev->stripe_size = 1 << (ctrl->vs[3] + shift);
id_ns = mem;
dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)))
goto disable;
- pci_set_drvdata(pdev, dev);
dev->bar = ioremap(pci_resource_start(pdev, 0), 8192);
if (!dev->bar)
goto disable;
-
- dev->db_stride = NVME_CAP_STRIDE(readq(&dev->bar->cap));
+ if (readl(&dev->bar->csts) == -1) {
+ result = -ENODEV;
+ goto unmap;
+ }
+ dev->db_stride = 1 << NVME_CAP_STRIDE(readq(&dev->bar->cap));
dev->dbs = ((void __iomem *)dev->bar) + 4096;
return 0;
+ unmap:
+ iounmap(dev->bar);
+ dev->bar = NULL;
disable:
pci_release_regions(pdev);
disable_pci:
if (dev->bar) {
iounmap(dev->bar);
dev->bar = NULL;
+ pci_release_regions(dev->pci_dev);
}
- pci_release_regions(dev->pci_dev);
if (pci_is_enabled(dev->pci_dev))
pci_disable_device(dev->pci_dev);
}
+struct nvme_delq_ctx {
+ struct task_struct *waiter;
+ struct kthread_worker *worker;
+ atomic_t refcount;
+};
+
+static void nvme_wait_dq(struct nvme_delq_ctx *dq, struct nvme_dev *dev)
+{
+ dq->waiter = current;
+ mb();
+
+ for (;;) {
+ set_current_state(TASK_KILLABLE);
+ if (!atomic_read(&dq->refcount))
+ break;
+ if (!schedule_timeout(ADMIN_TIMEOUT) ||
+ fatal_signal_pending(current)) {
+ set_current_state(TASK_RUNNING);
+
+ nvme_disable_ctrl(dev, readq(&dev->bar->cap));
+ nvme_disable_queue(dev, 0);
+
+ send_sig(SIGKILL, dq->worker->task, 1);
+ flush_kthread_worker(dq->worker);
+ return;
+ }
+ }
+ set_current_state(TASK_RUNNING);
+}
+
+static void nvme_put_dq(struct nvme_delq_ctx *dq)
+{
+ atomic_dec(&dq->refcount);
+ if (dq->waiter)
+ wake_up_process(dq->waiter);
+}
+
+static struct nvme_delq_ctx *nvme_get_dq(struct nvme_delq_ctx *dq)
+{
+ atomic_inc(&dq->refcount);
+ return dq;
+}
+
+static void nvme_del_queue_end(struct nvme_queue *nvmeq)
+{
+ struct nvme_delq_ctx *dq = nvmeq->cmdinfo.ctx;
+
+ nvme_clear_queue(nvmeq);
+ nvme_put_dq(dq);
+}
+
+static int adapter_async_del_queue(struct nvme_queue *nvmeq, u8 opcode,
+ kthread_work_func_t fn)
+{
+ struct nvme_command c;
+
+ memset(&c, 0, sizeof(c));
+ c.delete_queue.opcode = opcode;
+ c.delete_queue.qid = cpu_to_le16(nvmeq->qid);
+
+ init_kthread_work(&nvmeq->cmdinfo.work, fn);
+ return nvme_submit_admin_cmd_async(nvmeq->dev, &c, &nvmeq->cmdinfo);
+}
+
+static void nvme_del_cq_work_handler(struct kthread_work *work)
+{
+ struct nvme_queue *nvmeq = container_of(work, struct nvme_queue,
+ cmdinfo.work);
+ nvme_del_queue_end(nvmeq);
+}
+
+static int nvme_delete_cq(struct nvme_queue *nvmeq)
+{
+ return adapter_async_del_queue(nvmeq, nvme_admin_delete_cq,
+ nvme_del_cq_work_handler);
+}
+
+static void nvme_del_sq_work_handler(struct kthread_work *work)
+{
+ struct nvme_queue *nvmeq = container_of(work, struct nvme_queue,
+ cmdinfo.work);
+ int status = nvmeq->cmdinfo.status;
+
+ if (!status)
+ status = nvme_delete_cq(nvmeq);
+ if (status)
+ nvme_del_queue_end(nvmeq);
+}
+
+static int nvme_delete_sq(struct nvme_queue *nvmeq)
+{
+ return adapter_async_del_queue(nvmeq, nvme_admin_delete_sq,
+ nvme_del_sq_work_handler);
+}
+
+static void nvme_del_queue_start(struct kthread_work *work)
+{
+ struct nvme_queue *nvmeq = container_of(work, struct nvme_queue,
+ cmdinfo.work);
+ allow_signal(SIGKILL);
+ if (nvme_delete_sq(nvmeq))
+ nvme_del_queue_end(nvmeq);
+}
+
+static void nvme_disable_io_queues(struct nvme_dev *dev)
+{
+ int i;
+ DEFINE_KTHREAD_WORKER_ONSTACK(worker);
+ struct nvme_delq_ctx dq;
+ struct task_struct *kworker_task = kthread_run(kthread_worker_fn,
+ &worker, "nvme%d", dev->instance);
+
+ if (IS_ERR(kworker_task)) {
+ dev_err(&dev->pci_dev->dev,
+ "Failed to create queue del task\n");
+ for (i = dev->queue_count - 1; i > 0; i--)
+ nvme_disable_queue(dev, i);
+ return;
+ }
+
+ dq.waiter = NULL;
+ atomic_set(&dq.refcount, 0);
+ dq.worker = &worker;
+ for (i = dev->queue_count - 1; i > 0; i--) {
+ struct nvme_queue *nvmeq = dev->queues[i];
+
+ if (nvme_suspend_queue(nvmeq))
+ continue;
+ nvmeq->cmdinfo.ctx = nvme_get_dq(&dq);
+ nvmeq->cmdinfo.worker = dq.worker;
+ init_kthread_work(&nvmeq->cmdinfo.work, nvme_del_queue_start);
+ queue_kthread_work(dq.worker, &nvmeq->cmdinfo.work);
+ }
+ nvme_wait_dq(&dq, dev);
+ kthread_stop(kworker_task);
+}
+
static void nvme_dev_shutdown(struct nvme_dev *dev)
{
int i;
- for (i = dev->queue_count - 1; i >= 0; i--)
- nvme_disable_queue(dev, i);
+ dev->initialized = 0;
spin_lock(&dev_list_lock);
list_del_init(&dev->node);
spin_unlock(&dev_list_lock);
- if (dev->bar)
+ if (!dev->bar || (dev->bar && readl(&dev->bar->csts) == -1)) {
+ for (i = dev->queue_count - 1; i >= 0; i--) {
+ struct nvme_queue *nvmeq = dev->queues[i];
+ nvme_suspend_queue(nvmeq);
+ nvme_clear_queue(nvmeq);
+ }
+ } else {
+ nvme_disable_io_queues(dev);
nvme_shutdown_ctrl(dev);
+ nvme_disable_queue(dev, 0);
+ }
nvme_dev_unmap(dev);
}
static void nvme_dev_remove(struct nvme_dev *dev)
{
- struct nvme_ns *ns, *next;
+ struct nvme_ns *ns;
- list_for_each_entry_safe(ns, next, &dev->namespaces, list) {
- list_del(&ns->list);
- del_gendisk(ns->disk);
- nvme_ns_free(ns);
+ list_for_each_entry(ns, &dev->namespaces, list) {
+ if (ns->disk->flags & GENHD_FL_UP)
+ del_gendisk(ns->disk);
+ if (!blk_queue_dying(ns->queue))
+ blk_cleanup_queue(ns->queue);
}
}
spin_unlock(&dev_list_lock);
}
+static void nvme_free_namespaces(struct nvme_dev *dev)
+{
+ struct nvme_ns *ns, *next;
+
+ list_for_each_entry_safe(ns, next, &dev->namespaces, list) {
+ list_del(&ns->list);
+ put_disk(ns->disk);
+ kfree(ns);
+ }
+}
+
static void nvme_free_dev(struct kref *kref)
{
struct nvme_dev *dev = container_of(kref, struct nvme_dev, kref);
- nvme_dev_remove(dev);
- nvme_dev_shutdown(dev);
- nvme_free_queues(dev);
- nvme_release_instance(dev);
- nvme_release_prp_pools(dev);
+
+ nvme_free_namespaces(dev);
kfree(dev->queues);
kfree(dev->entry);
kfree(dev);
return result;
disable:
+ nvme_disable_queue(dev, 0);
spin_lock(&dev_list_lock);
list_del_init(&dev->node);
spin_unlock(&dev_list_lock);
return result;
}
+static int nvme_remove_dead_ctrl(void *arg)
+{
+ struct nvme_dev *dev = (struct nvme_dev *)arg;
+ struct pci_dev *pdev = dev->pci_dev;
+
+ if (pci_get_drvdata(pdev))
+ pci_stop_and_remove_bus_device(pdev);
+ kref_put(&dev->kref, nvme_free_dev);
+ return 0;
+}
+
+static void nvme_remove_disks(struct work_struct *ws)
+{
+ int i;
+ struct nvme_dev *dev = container_of(ws, struct nvme_dev, reset_work);
+
+ nvme_dev_remove(dev);
+ spin_lock(&dev_list_lock);
+ for (i = dev->queue_count - 1; i > 0; i--) {
+ BUG_ON(!dev->queues[i] || !dev->queues[i]->q_suspended);
+ nvme_free_queue(dev->queues[i]);
+ dev->queue_count--;
+ dev->queues[i] = NULL;
+ }
+ spin_unlock(&dev_list_lock);
+}
+
+static int nvme_dev_resume(struct nvme_dev *dev)
+{
+ int ret;
+
+ ret = nvme_dev_start(dev);
+ if (ret && ret != -EBUSY)
+ return ret;
+ if (ret == -EBUSY) {
+ spin_lock(&dev_list_lock);
+ PREPARE_WORK(&dev->reset_work, nvme_remove_disks);
+ queue_work(nvme_workq, &dev->reset_work);
+ spin_unlock(&dev_list_lock);
+ }
+ dev->initialized = 1;
+ return 0;
+}
+
+static void nvme_dev_reset(struct nvme_dev *dev)
+{
+ nvme_dev_shutdown(dev);
+ if (nvme_dev_resume(dev)) {
+ dev_err(&dev->pci_dev->dev, "Device failed to resume\n");
+ kref_get(&dev->kref);
+ if (IS_ERR(kthread_run(nvme_remove_dead_ctrl, dev, "nvme%d",
+ dev->instance))) {
+ dev_err(&dev->pci_dev->dev,
+ "Failed to start controller remove task\n");
+ kref_put(&dev->kref, nvme_free_dev);
+ }
+ }
+}
+
+static void nvme_reset_failed_dev(struct work_struct *ws)
+{
+ struct nvme_dev *dev = container_of(ws, struct nvme_dev, reset_work);
+ nvme_dev_reset(dev);
+}
+
static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
int result = -ENOMEM;
goto free;
INIT_LIST_HEAD(&dev->namespaces);
+ INIT_WORK(&dev->reset_work, nvme_reset_failed_dev);
dev->pci_dev = pdev;
-
+ pci_set_drvdata(pdev, dev);
result = nvme_set_instance(dev);
if (result)
goto free;
goto release_pools;
}
+ kref_init(&dev->kref);
result = nvme_dev_add(dev);
if (result)
goto shutdown;
if (result)
goto remove;
- kref_init(&dev->kref);
+ dev->initialized = 1;
return 0;
remove:
nvme_dev_remove(dev);
+ nvme_free_namespaces(dev);
shutdown:
nvme_dev_shutdown(dev);
release_pools:
- nvme_free_queues(dev);
+ nvme_free_queues(dev, 0);
nvme_release_prp_pools(dev);
release:
nvme_release_instance(dev);
return result;
}
+static void nvme_shutdown(struct pci_dev *pdev)
+{
+ struct nvme_dev *dev = pci_get_drvdata(pdev);
+ nvme_dev_shutdown(dev);
+}
+
static void nvme_remove(struct pci_dev *pdev)
{
struct nvme_dev *dev = pci_get_drvdata(pdev);
+
+ spin_lock(&dev_list_lock);
+ list_del_init(&dev->node);
+ spin_unlock(&dev_list_lock);
+
+ pci_set_drvdata(pdev, NULL);
+ flush_work(&dev->reset_work);
misc_deregister(&dev->miscdev);
+ nvme_dev_remove(dev);
+ nvme_dev_shutdown(dev);
+ nvme_free_queues(dev, 0);
+ nvme_release_instance(dev);
+ nvme_release_prp_pools(dev);
kref_put(&dev->kref, nvme_free_dev);
}
{
struct pci_dev *pdev = to_pci_dev(dev);
struct nvme_dev *ndev = pci_get_drvdata(pdev);
- int ret;
- ret = nvme_dev_start(ndev);
- /* XXX: should remove gendisks if resume fails */
- if (ret)
- nvme_free_queues(ndev);
- return ret;
+ if (nvme_dev_resume(ndev) && !work_busy(&ndev->reset_work)) {
+ PREPARE_WORK(&ndev->reset_work, nvme_reset_failed_dev);
+ queue_work(nvme_workq, &ndev->reset_work);
+ }
+ return 0;
}
static SIMPLE_DEV_PM_OPS(nvme_dev_pm_ops, nvme_suspend, nvme_resume);
.id_table = nvme_id_table,
.probe = nvme_probe,
.remove = nvme_remove,
+ .shutdown = nvme_shutdown,
.driver = {
.pm = &nvme_dev_pm_ops,
},
if (IS_ERR(nvme_thread))
return PTR_ERR(nvme_thread);
+ result = -ENOMEM;
+ nvme_workq = create_singlethread_workqueue("nvme");
+ if (!nvme_workq)
+ goto kill_kthread;
+
result = register_blkdev(nvme_major, "nvme");
if (result < 0)
- goto kill_kthread;
+ goto kill_workq;
else if (result > 0)
nvme_major = result;
unregister_blkdev:
unregister_blkdev(nvme_major, "nvme");
+ kill_workq:
+ destroy_workqueue(nvme_workq);
kill_kthread:
kthread_stop(nvme_thread);
return result;
{
pci_unregister_driver(&nvme_driver);
unregister_blkdev(nvme_major, "nvme");
+ destroy_workqueue(nvme_workq);
kthread_stop(nvme_thread);
}
#include <linux/bio.h>
#include <linux/bitops.h>
#include <linux/blkdev.h>
+#include <linux/compat.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
return retcode;
}
+#ifdef CONFIG_COMPAT
+typedef struct sg_io_hdr32 {
+ compat_int_t interface_id; /* [i] 'S' for SCSI generic (required) */
+ compat_int_t dxfer_direction; /* [i] data transfer direction */
+ unsigned char cmd_len; /* [i] SCSI command length ( <= 16 bytes) */
+ unsigned char mx_sb_len; /* [i] max length to write to sbp */
+ unsigned short iovec_count; /* [i] 0 implies no scatter gather */
+ compat_uint_t dxfer_len; /* [i] byte count of data transfer */
+ compat_uint_t dxferp; /* [i], [*io] points to data transfer memory
+ or scatter gather list */
+ compat_uptr_t cmdp; /* [i], [*i] points to command to perform */
+ compat_uptr_t sbp; /* [i], [*o] points to sense_buffer memory */
+ compat_uint_t timeout; /* [i] MAX_UINT->no timeout (unit: millisec) */
+ compat_uint_t flags; /* [i] 0 -> default, see SG_FLAG... */
+ compat_int_t pack_id; /* [i->o] unused internally (normally) */
+ compat_uptr_t usr_ptr; /* [i->o] unused internally */
+ unsigned char status; /* [o] scsi status */
+ unsigned char masked_status; /* [o] shifted, masked scsi status */
+ unsigned char msg_status; /* [o] messaging level data (optional) */
+ unsigned char sb_len_wr; /* [o] byte count actually written to sbp */
+ unsigned short host_status; /* [o] errors from host adapter */
+ unsigned short driver_status; /* [o] errors from software driver */
+ compat_int_t resid; /* [o] dxfer_len - actual_transferred */
+ compat_uint_t duration; /* [o] time taken by cmd (unit: millisec) */
+ compat_uint_t info; /* [o] auxiliary information */
+} sg_io_hdr32_t; /* 64 bytes long (on sparc32) */
+
+typedef struct sg_iovec32 {
+ compat_uint_t iov_base;
+ compat_uint_t iov_len;
+} sg_iovec32_t;
+
+static int sg_build_iovec(sg_io_hdr_t __user *sgio, void __user *dxferp, u16 iovec_count)
+{
+ sg_iovec_t __user *iov = (sg_iovec_t __user *) (sgio + 1);
+ sg_iovec32_t __user *iov32 = dxferp;
+ int i;
+
+ for (i = 0; i < iovec_count; i++) {
+ u32 base, len;
+
+ if (get_user(base, &iov32[i].iov_base) ||
+ get_user(len, &iov32[i].iov_len) ||
+ put_user(compat_ptr(base), &iov[i].iov_base) ||
+ put_user(len, &iov[i].iov_len))
+ return -EFAULT;
+ }
+
+ if (put_user(iov, &sgio->dxferp))
+ return -EFAULT;
+ return 0;
+}
+
+int nvme_sg_io32(struct nvme_ns *ns, unsigned long arg)
+{
+ sg_io_hdr32_t __user *sgio32 = (sg_io_hdr32_t __user *)arg;
+ sg_io_hdr_t __user *sgio;
+ u16 iovec_count;
+ u32 data;
+ void __user *dxferp;
+ int err;
+ int interface_id;
+
+ if (get_user(interface_id, &sgio32->interface_id))
+ return -EFAULT;
+ if (interface_id != 'S')
+ return -EINVAL;
+
+ if (get_user(iovec_count, &sgio32->iovec_count))
+ return -EFAULT;
+
+ {
+ void __user *top = compat_alloc_user_space(0);
+ void __user *new = compat_alloc_user_space(sizeof(sg_io_hdr_t) +
+ (iovec_count * sizeof(sg_iovec_t)));
+ if (new > top)
+ return -EINVAL;
+
+ sgio = new;
+ }
+
+ /* Ok, now construct. */
+ if (copy_in_user(&sgio->interface_id, &sgio32->interface_id,
+ (2 * sizeof(int)) +
+ (2 * sizeof(unsigned char)) +
+ (1 * sizeof(unsigned short)) +
+ (1 * sizeof(unsigned int))))
+ return -EFAULT;
+
+ if (get_user(data, &sgio32->dxferp))
+ return -EFAULT;
+ dxferp = compat_ptr(data);
+ if (iovec_count) {
+ if (sg_build_iovec(sgio, dxferp, iovec_count))
+ return -EFAULT;
+ } else {
+ if (put_user(dxferp, &sgio->dxferp))
+ return -EFAULT;
+ }
+
+ {
+ unsigned char __user *cmdp;
+ unsigned char __user *sbp;
+
+ if (get_user(data, &sgio32->cmdp))
+ return -EFAULT;
+ cmdp = compat_ptr(data);
+
+ if (get_user(data, &sgio32->sbp))
+ return -EFAULT;
+ sbp = compat_ptr(data);
+
+ if (put_user(cmdp, &sgio->cmdp) ||
+ put_user(sbp, &sgio->sbp))
+ return -EFAULT;
+ }
+
+ if (copy_in_user(&sgio->timeout, &sgio32->timeout,
+ 3 * sizeof(int)))
+ return -EFAULT;
+
+ if (get_user(data, &sgio32->usr_ptr))
+ return -EFAULT;
+ if (put_user(compat_ptr(data), &sgio->usr_ptr))
+ return -EFAULT;
+
+ err = nvme_sg_io(ns, sgio);
+ if (err >= 0) {
+ void __user *datap;
+
+ if (copy_in_user(&sgio32->pack_id, &sgio->pack_id,
+ sizeof(int)) ||
+ get_user(datap, &sgio->usr_ptr) ||
+ put_user((u32)(unsigned long)datap,
+ &sgio32->usr_ptr) ||
+ copy_in_user(&sgio32->status, &sgio->status,
+ (4 * sizeof(unsigned char)) +
+ (2 * sizeof(unsigned short)) +
+ (3 * sizeof(int))))
+ err = -EFAULT;
+ }
+
+ return err;
+}
+#endif
+
int nvme_sg_get_version_num(int __user *ip)
{
return put_user(sg_version_num, ip);
return virtqueue_add_sgs(vq, sgs, num_out, num_in, vbr, GFP_ATOMIC);
}
-static inline void virtblk_request_done(struct virtblk_req *vbr)
+static inline void virtblk_request_done(struct request *req)
{
- struct request *req = vbr->req;
+ struct virtblk_req *vbr = req->special;
int error = virtblk_result(vbr);
if (req->cmd_type == REQ_TYPE_BLOCK_PC) {
do {
virtqueue_disable_cb(vq);
while ((vbr = virtqueue_get_buf(vblk->vq, &len)) != NULL) {
- virtblk_request_done(vbr);
+ blk_mq_complete_request(vbr->req);
req_done = true;
}
if (unlikely(virtqueue_is_broken(vq)))
.map_queue = blk_mq_map_queue,
.alloc_hctx = blk_mq_alloc_single_hw_queue,
.free_hctx = blk_mq_free_single_hw_queue,
+ .complete = virtblk_request_done,
};
static struct blk_mq_reg virtio_mq_reg = {
if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST ||
!rb_next(&persistent_gnt->node)) {
- ret = gnttab_unmap_refs(unmap, pages, segs_to_unmap);
+ ret = gnttab_unmap_refs(unmap, NULL, pages,
+ segs_to_unmap);
BUG_ON(ret);
put_free_pages(blkif, pages, segs_to_unmap);
segs_to_unmap = 0;
BUG_ON(num != 0);
}
-static void unmap_purged_grants(struct work_struct *work)
+void xen_blkbk_unmap_purged_grants(struct work_struct *work)
{
struct gnttab_unmap_grant_ref unmap[BLKIF_MAX_SEGMENTS_PER_REQUEST];
struct page *pages[BLKIF_MAX_SEGMENTS_PER_REQUEST];
pages[segs_to_unmap] = persistent_gnt->page;
if (++segs_to_unmap == BLKIF_MAX_SEGMENTS_PER_REQUEST) {
- ret = gnttab_unmap_refs(unmap, pages, segs_to_unmap);
+ ret = gnttab_unmap_refs(unmap, NULL, pages,
+ segs_to_unmap);
BUG_ON(ret);
put_free_pages(blkif, pages, segs_to_unmap);
segs_to_unmap = 0;
kfree(persistent_gnt);
}
if (segs_to_unmap > 0) {
- ret = gnttab_unmap_refs(unmap, pages, segs_to_unmap);
+ ret = gnttab_unmap_refs(unmap, NULL, pages, segs_to_unmap);
BUG_ON(ret);
put_free_pages(blkif, pages, segs_to_unmap);
}
pr_debug(DRV_PFX "Going to purge %u persistent grants\n", num_clean);
- INIT_LIST_HEAD(&blkif->persistent_purge_list);
+ BUG_ON(!list_empty(&blkif->persistent_purge_list));
root = &blkif->persistent_gnts;
purge_list:
foreach_grant_safe(persistent_gnt, n, root, node) {
blkif->vbd.overflow_max_grants = 0;
/* We can defer this work */
- INIT_WORK(&blkif->persistent_purge_work, unmap_purged_grants);
schedule_work(&blkif->persistent_purge_work);
pr_debug(DRV_PFX "Purged %u/%u\n", (total - num_clean), total);
return;
print_stats(blkif);
}
- /* Since we are shutting down remove all pages from the buffer */
- shrink_free_pagepool(blkif, 0 /* All */);
+ /* Drain pending purge work */
+ flush_work(&blkif->persistent_purge_work);
+ if (log_stats)
+ print_stats(blkif);
+
+ blkif->xenblkd = NULL;
+ xen_blkif_put(blkif);
+
+ return 0;
+}
+
+/*
+ * Remove persistent grants and empty the pool of free pages
+ */
+void xen_blkbk_free_caches(struct xen_blkif *blkif)
+{
/* Free all persistent grant pages */
if (!RB_EMPTY_ROOT(&blkif->persistent_gnts))
free_persistent_gnts(blkif, &blkif->persistent_gnts,
BUG_ON(!RB_EMPTY_ROOT(&blkif->persistent_gnts));
blkif->persistent_gnt_c = 0;
- if (log_stats)
- print_stats(blkif);
-
- blkif->xenblkd = NULL;
- xen_blkif_put(blkif);
-
- return 0;
+ /* Since we are shutting down remove all pages from the buffer */
+ shrink_free_pagepool(blkif, 0 /* All */);
}
/*
GNTMAP_host_map, pages[i]->handle);
pages[i]->handle = BLKBACK_INVALID_HANDLE;
if (++invcount == BLKIF_MAX_SEGMENTS_PER_REQUEST) {
- ret = gnttab_unmap_refs(unmap, unmap_pages, invcount);
+ ret = gnttab_unmap_refs(unmap, NULL, unmap_pages,
+ invcount);
BUG_ON(ret);
put_free_pages(blkif, unmap_pages, invcount);
invcount = 0;
}
}
if (invcount) {
- ret = gnttab_unmap_refs(unmap, unmap_pages, invcount);
+ ret = gnttab_unmap_refs(unmap, NULL, unmap_pages, invcount);
BUG_ON(ret);
put_free_pages(blkif, unmap_pages, invcount);
}
}
if (segs_to_map) {
- ret = gnttab_map_refs(map, pages_to_gnt, segs_to_map);
+ ret = gnttab_map_refs(map, NULL, pages_to_gnt, segs_to_map);
BUG_ON(ret);
}
struct grant_page **pages = pending_req->indirect_pages;
struct xen_blkif *blkif = pending_req->blkif;
int indirect_grefs, rc, n, nseg, i;
- struct blkif_request_segment_aligned *segments = NULL;
+ struct blkif_request_segment *segments = NULL;
nseg = pending_req->nr_pages;
indirect_grefs = INDIRECT_PAGES(nseg);
{
atomic_set(&blkif->drain, 1);
do {
- /* The initial value is one, and one refcnt taken at the
- * start of the xen_blkif_schedule thread. */
- if (atomic_read(&blkif->refcnt) <= 2)
+ if (atomic_read(&blkif->inflight) == 0)
break;
wait_for_completion_interruptible_timeout(
&blkif->drain_complete, HZ);
* the proper response on the ring.
*/
if (atomic_dec_and_test(&pending_req->pendcnt)) {
- xen_blkbk_unmap(pending_req->blkif,
+ struct xen_blkif *blkif = pending_req->blkif;
+
+ xen_blkbk_unmap(blkif,
pending_req->segments,
pending_req->nr_pages);
- make_response(pending_req->blkif, pending_req->id,
+ make_response(blkif, pending_req->id,
pending_req->operation, pending_req->status);
- xen_blkif_put(pending_req->blkif);
- if (atomic_read(&pending_req->blkif->refcnt) <= 2) {
- if (atomic_read(&pending_req->blkif->drain))
- complete(&pending_req->blkif->drain_complete);
+ free_req(blkif, pending_req);
+ /*
+ * Make sure the request is freed before releasing blkif,
+ * or there could be a race between free_req and the
+ * cleanup done in xen_blkif_free during shutdown.
+ *
+ * NB: The fact that we might try to wake up pending_free_wq
+ * before drain_complete (in case there's a drain going on)
+ * it's not a problem with our current implementation
+ * because we can assure there's no thread waiting on
+ * pending_free_wq if there's a drain going on, but it has
+ * to be taken into account if the current model is changed.
+ */
+ if (atomic_dec_and_test(&blkif->inflight) && atomic_read(&blkif->drain)) {
+ complete(&blkif->drain_complete);
}
- free_req(pending_req->blkif, pending_req);
+ xen_blkif_put(blkif);
}
}
* below (in "!bio") if we are handling a BLKIF_OP_DISCARD.
*/
xen_blkif_get(blkif);
+ atomic_inc(&blkif->inflight);
for (i = 0; i < nseg; i++) {
while ((bio == NULL) ||
#define MAX_INDIRECT_SEGMENTS 256
#define SEGS_PER_INDIRECT_FRAME \
- (PAGE_SIZE/sizeof(struct blkif_request_segment_aligned))
+ (PAGE_SIZE/sizeof(struct blkif_request_segment))
#define MAX_INDIRECT_PAGES \
((MAX_INDIRECT_SEGMENTS + SEGS_PER_INDIRECT_FRAME - 1)/SEGS_PER_INDIRECT_FRAME)
#define INDIRECT_PAGES(_segs) \
/* for barrier (drain) requests */
struct completion drain_complete;
atomic_t drain;
+ atomic_t inflight;
/* One thread per one blkif. */
struct task_struct *xenblkd;
unsigned int waiting_reqs;
irqreturn_t xen_blkif_be_int(int irq, void *dev_id);
int xen_blkif_schedule(void *arg);
int xen_blkif_purge_persistent(void *arg);
+void xen_blkbk_free_caches(struct xen_blkif *blkif);
int xen_blkbk_flush_diskcache(struct xenbus_transaction xbt,
struct backend_info *be, int state);
int xen_blkbk_barrier(struct xenbus_transaction xbt,
struct backend_info *be, int state);
struct xenbus_device *xen_blkbk_xenbus(struct backend_info *be);
+void xen_blkbk_unmap_purged_grants(struct work_struct *work);
static inline void blkif_get_x86_32_req(struct blkif_request *dst,
struct blkif_x86_32_request *src)
blkif->persistent_gnts.rb_node = NULL;
spin_lock_init(&blkif->free_pages_lock);
INIT_LIST_HEAD(&blkif->free_pages);
+ INIT_LIST_HEAD(&blkif->persistent_purge_list);
blkif->free_pages_num = 0;
atomic_set(&blkif->persistent_gnt_in_use, 0);
+ atomic_set(&blkif->inflight, 0);
+ INIT_WORK(&blkif->persistent_purge_work, xen_blkbk_unmap_purged_grants);
INIT_LIST_HEAD(&blkif->pending_free);
if (!atomic_dec_and_test(&blkif->refcnt))
BUG();
+ /* Remove all persistent grants and the cache of ballooned pages. */
+ xen_blkbk_free_caches(blkif);
+
+ /* Make sure everything is drained before shutting down */
+ BUG_ON(blkif->persistent_gnt_c != 0);
+ BUG_ON(atomic_read(&blkif->persistent_gnt_in_use) != 0);
+ BUG_ON(blkif->free_pages_num != 0);
+ BUG_ON(!list_empty(&blkif->persistent_purge_list));
+ BUG_ON(!list_empty(&blkif->free_pages));
+ BUG_ON(!RB_EMPTY_ROOT(&blkif->persistent_gnts));
+
/* Check that there is no request in use */
list_for_each_entry_safe(req, n, &blkif->pending_free, free_list) {
list_del(&req->free_list);
#define DEV_NAME "xvd" /* name in /dev */
#define SEGS_PER_INDIRECT_FRAME \
- (PAGE_SIZE/sizeof(struct blkif_request_segment_aligned))
+ (PAGE_SIZE/sizeof(struct blkif_request_segment))
#define INDIRECT_GREFS(_segs) \
((_segs + SEGS_PER_INDIRECT_FRAME - 1)/SEGS_PER_INDIRECT_FRAME)
unsigned long id;
unsigned int fsect, lsect;
int i, ref, n;
- struct blkif_request_segment_aligned *segments = NULL;
+ struct blkif_request_segment *segments = NULL;
/*
* Used to store if we are able to queue the request by just using
} else {
n = i % SEGS_PER_INDIRECT_FRAME;
segments[n] =
- (struct blkif_request_segment_aligned) {
+ (struct blkif_request_segment) {
.gref = ref,
.first_sect = fsect,
.last_sect = lsect };
case XenbusStateReconfiguring:
case XenbusStateReconfigured:
case XenbusStateUnknown:
- case XenbusStateClosed:
break;
case XenbusStateConnected:
blkfront_connect(info);
break;
+ case XenbusStateClosed:
+ if (dev->state == XenbusStateClosed)
+ break;
+ /* Missed the backend's Closing state -- fallthrough */
case XenbusStateClosing:
blkfront_closing(info);
break;
#define DRIVER_NAME "CCI-400"
#define DRIVER_NAME_PMU DRIVER_NAME " PMU"
-#define PMU_NAME "CCI_400"
#define CCI_PORT_CTRL 0x0
#define CCI_CTRL_STATUS 0xc
#define CCI_REV_R0 0
#define CCI_REV_R1 1
-#define CCI_REV_R0_P4 4
-#define CCI_REV_R1_P2 6
+#define CCI_REV_R1_PX 5
#define CCI_PMU_EVT_SEL 0x000
#define CCI_PMU_CNTR 0x004
},
};
+/*
+ * Export different PMU names for the different revisions so userspace knows
+ * because the event ids are different
+ */
+static char *const pmu_names[] = {
+ [CCI_REV_R0] = "CCI_400",
+ [CCI_REV_R1] = "CCI_400_r1",
+};
+
struct cci_pmu_drv_data {
void __iomem *base;
struct arm_pmu *cci_pmu;
rev = readl_relaxed(cci_ctrl_base + CCI_PID2) & CCI_PID2_REV_MASK;
rev >>= CCI_PID2_REV_SHIFT;
- if (rev <= CCI_REV_R0_P4)
+ if (rev < CCI_REV_R1_PX)
return CCI_REV_R0;
- else if (rev <= CCI_REV_R1_P2)
+ else
return CCI_REV_R1;
-
- return -ENOENT;
}
static struct pmu_port_event_ranges *port_range_by_rev(void)
{
int rev = probe_cci_revision();
- if (rev < 0)
- return NULL;
-
return &port_event_range[rev];
}
static int cci_pmu_init(struct arm_pmu *cci_pmu, struct platform_device *pdev)
{
*cci_pmu = (struct arm_pmu){
- .name = PMU_NAME,
+ .name = pmu_names[probe_cci_revision()],
.max_period = (1LLU << 32) - 1,
.get_hw_events = pmu_get_hw_events,
.get_event_idx = pmu_get_event_idx,
const __be32 *prop;
int ret;
- np = of_find_matching_node(NULL, of_mvebu_mbus_ids);
+ np = of_find_matching_node_and_match(NULL, of_mvebu_mbus_ids, &of_id);
if (!np) {
pr_err("could not find a matching SoC family\n");
return -ENODEV;
}
- of_id = of_match_node(of_mvebu_mbus_ids, np);
mbus_state.soc = of_id->data;
prop = of_get_property(np, "controller", NULL);
config MAX_RAW_DEVS
int "Maximum number of RAW devices to support (1-65536)"
depends on RAW_DRIVER
+ range 1 65536
default "256"
help
The maximum number of RAW devices that are supported.
If unsure, say Y.
config HW_RANDOM_MSM
- tristate "Qualcomm MSM Random Number Generator support"
- depends on HW_RANDOM && ARCH_MSM
+ tristate "Qualcomm SoCs Random Number Generator support"
+ depends on HW_RANDOM && ARCH_QCOM
---help---
This driver provides kernel-side support for the Random Number
- Generator hardware found on Qualcomm MSM SoCs.
+ Generator hardware found on Qualcomm SoCs.
To compile this driver as a module, choose M here. the
module will be called msm-rng.
struct raw_device_data *rawdev;
struct block_device *bdev;
- if (number <= 0 || number >= MAX_RAW_MINORS)
+ if (number <= 0 || number >= max_raw_minors)
return -EINVAL;
rawdev = &raw_devices[number];
} else {
/* Failback to copying a page */
struct page *page = alloc_page(GFP_KERNEL);
- char *src = buf->ops->map(pipe, buf, 1);
- char *dst;
+ char *src;
if (!page)
return -ENOMEM;
- dst = kmap(page);
offset = sd->pos & ~PAGE_MASK;
if (len + offset > PAGE_SIZE)
len = PAGE_SIZE - offset;
- memcpy(dst + offset, src + buf->offset, len);
-
- kunmap(page);
+ src = buf->ops->map(pipe, buf, 1);
+ memcpy(page_address(page) + offset, src + buf->offset, len);
buf->ops->unmap(pipe, buf, src);
sg_set_page(&(sgl->sg[sgl->n]), page, len, offset);
endmenu
+source "drivers/clk/bcm/Kconfig"
source "drivers/clk/mvebu/Kconfig"
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
obj-$(CONFIG_COMMON_CLK_AT91) += at91/
+obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm/
obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/
ifeq ($(CONFIG_COMMON_CLK), y)
--- /dev/null
+config CLK_BCM_KONA
+ bool "Broadcom Kona CCU clock support"
+ depends on ARCH_BCM_MOBILE
+ depends on COMMON_CLK
+ default y
+ help
+ Enable common clock framework support for Broadcom SoCs
+ using "Kona" style clock control units, including those
+ in the BCM281xx family.
--- /dev/null
+obj-$(CONFIG_CLK_BCM_KONA) += clk-kona.o
+obj-$(CONFIG_CLK_BCM_KONA) += clk-kona-setup.o
+obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281xx.o
--- /dev/null
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "clk-kona.h"
+#include "dt-bindings/clock/bcm281xx.h"
+
+/* bcm11351 CCU device tree "compatible" strings */
+#define BCM11351_DT_ROOT_CCU_COMPAT "brcm,bcm11351-root-ccu"
+#define BCM11351_DT_AON_CCU_COMPAT "brcm,bcm11351-aon-ccu"
+#define BCM11351_DT_HUB_CCU_COMPAT "brcm,bcm11351-hub-ccu"
+#define BCM11351_DT_MASTER_CCU_COMPAT "brcm,bcm11351-master-ccu"
+#define BCM11351_DT_SLAVE_CCU_COMPAT "brcm,bcm11351-slave-ccu"
+
+/* Root CCU clocks */
+
+static struct peri_clk_data frac_1m_data = {
+ .gate = HW_SW_GATE(0x214, 16, 0, 1),
+ .trig = TRIGGER(0x0e04, 0),
+ .div = FRAC_DIVIDER(0x0e00, 0, 22, 16),
+ .clocks = CLOCKS("ref_crystal"),
+};
+
+/* AON CCU clocks */
+
+static struct peri_clk_data hub_timer_data = {
+ .gate = HW_SW_GATE(0x0414, 16, 0, 1),
+ .clocks = CLOCKS("bbl_32k",
+ "frac_1m",
+ "dft_19_5m"),
+ .sel = SELECTOR(0x0a10, 0, 2),
+ .trig = TRIGGER(0x0a40, 4),
+};
+
+static struct peri_clk_data pmu_bsc_data = {
+ .gate = HW_SW_GATE(0x0418, 16, 0, 1),
+ .clocks = CLOCKS("ref_crystal",
+ "pmu_bsc_var",
+ "bbl_32k"),
+ .sel = SELECTOR(0x0a04, 0, 2),
+ .div = DIVIDER(0x0a04, 3, 4),
+ .trig = TRIGGER(0x0a40, 0),
+};
+
+static struct peri_clk_data pmu_bsc_var_data = {
+ .clocks = CLOCKS("var_312m",
+ "ref_312m"),
+ .sel = SELECTOR(0x0a00, 0, 2),
+ .div = DIVIDER(0x0a00, 4, 5),
+ .trig = TRIGGER(0x0a40, 2),
+};
+
+/* Hub CCU clocks */
+
+static struct peri_clk_data tmon_1m_data = {
+ .gate = HW_SW_GATE(0x04a4, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "frac_1m"),
+ .sel = SELECTOR(0x0e74, 0, 2),
+ .trig = TRIGGER(0x0e84, 1),
+};
+
+/* Master CCU clocks */
+
+static struct peri_clk_data sdio1_data = {
+ .gate = HW_SW_GATE(0x0358, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_52m",
+ "ref_52m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a28, 0, 3),
+ .div = DIVIDER(0x0a28, 4, 14),
+ .trig = TRIGGER(0x0afc, 9),
+};
+
+static struct peri_clk_data sdio2_data = {
+ .gate = HW_SW_GATE(0x035c, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_52m",
+ "ref_52m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a2c, 0, 3),
+ .div = DIVIDER(0x0a2c, 4, 14),
+ .trig = TRIGGER(0x0afc, 10),
+};
+
+static struct peri_clk_data sdio3_data = {
+ .gate = HW_SW_GATE(0x0364, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_52m",
+ "ref_52m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a34, 0, 3),
+ .div = DIVIDER(0x0a34, 4, 14),
+ .trig = TRIGGER(0x0afc, 12),
+};
+
+static struct peri_clk_data sdio4_data = {
+ .gate = HW_SW_GATE(0x0360, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_52m",
+ "ref_52m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a30, 0, 3),
+ .div = DIVIDER(0x0a30, 4, 14),
+ .trig = TRIGGER(0x0afc, 11),
+};
+
+static struct peri_clk_data usb_ic_data = {
+ .gate = HW_SW_GATE(0x0354, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_96m",
+ "ref_96m"),
+ .div = FIXED_DIVIDER(2),
+ .sel = SELECTOR(0x0a24, 0, 2),
+ .trig = TRIGGER(0x0afc, 7),
+};
+
+/* also called usbh_48m */
+static struct peri_clk_data hsic2_48m_data = {
+ .gate = HW_SW_GATE(0x0370, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a38, 0, 2),
+ .div = FIXED_DIVIDER(2),
+ .trig = TRIGGER(0x0afc, 5),
+};
+
+/* also called usbh_12m */
+static struct peri_clk_data hsic2_12m_data = {
+ .gate = HW_SW_GATE(0x0370, 20, 4, 5),
+ .div = DIVIDER(0x0a38, 12, 2),
+ .clocks = CLOCKS("ref_crystal",
+ "var_96m",
+ "ref_96m"),
+ .pre_div = FIXED_DIVIDER(2),
+ .sel = SELECTOR(0x0a38, 0, 2),
+ .trig = TRIGGER(0x0afc, 5),
+};
+
+/* Slave CCU clocks */
+
+static struct peri_clk_data uartb_data = {
+ .gate = HW_SW_GATE(0x0400, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_156m",
+ "ref_156m"),
+ .sel = SELECTOR(0x0a10, 0, 2),
+ .div = FRAC_DIVIDER(0x0a10, 4, 12, 8),
+ .trig = TRIGGER(0x0afc, 2),
+};
+
+static struct peri_clk_data uartb2_data = {
+ .gate = HW_SW_GATE(0x0404, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_156m",
+ "ref_156m"),
+ .sel = SELECTOR(0x0a14, 0, 2),
+ .div = FRAC_DIVIDER(0x0a14, 4, 12, 8),
+ .trig = TRIGGER(0x0afc, 3),
+};
+
+static struct peri_clk_data uartb3_data = {
+ .gate = HW_SW_GATE(0x0408, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_156m",
+ "ref_156m"),
+ .sel = SELECTOR(0x0a18, 0, 2),
+ .div = FRAC_DIVIDER(0x0a18, 4, 12, 8),
+ .trig = TRIGGER(0x0afc, 4),
+};
+
+static struct peri_clk_data uartb4_data = {
+ .gate = HW_SW_GATE(0x0408, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_156m",
+ "ref_156m"),
+ .sel = SELECTOR(0x0a1c, 0, 2),
+ .div = FRAC_DIVIDER(0x0a1c, 4, 12, 8),
+ .trig = TRIGGER(0x0afc, 5),
+};
+
+static struct peri_clk_data ssp0_data = {
+ .gate = HW_SW_GATE(0x0410, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m",
+ "ref_104m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a20, 0, 3),
+ .div = DIVIDER(0x0a20, 4, 14),
+ .trig = TRIGGER(0x0afc, 6),
+};
+
+static struct peri_clk_data ssp2_data = {
+ .gate = HW_SW_GATE(0x0418, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m",
+ "ref_104m",
+ "var_96m",
+ "ref_96m"),
+ .sel = SELECTOR(0x0a28, 0, 3),
+ .div = DIVIDER(0x0a28, 4, 14),
+ .trig = TRIGGER(0x0afc, 8),
+};
+
+static struct peri_clk_data bsc1_data = {
+ .gate = HW_SW_GATE(0x0458, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m",
+ "ref_104m",
+ "var_13m",
+ "ref_13m"),
+ .sel = SELECTOR(0x0a64, 0, 3),
+ .trig = TRIGGER(0x0afc, 23),
+};
+
+static struct peri_clk_data bsc2_data = {
+ .gate = HW_SW_GATE(0x045c, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m",
+ "ref_104m",
+ "var_13m",
+ "ref_13m"),
+ .sel = SELECTOR(0x0a68, 0, 3),
+ .trig = TRIGGER(0x0afc, 24),
+};
+
+static struct peri_clk_data bsc3_data = {
+ .gate = HW_SW_GATE(0x0484, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m",
+ "ref_104m",
+ "var_13m",
+ "ref_13m"),
+ .sel = SELECTOR(0x0a84, 0, 3),
+ .trig = TRIGGER(0x0b00, 2),
+};
+
+static struct peri_clk_data pwm_data = {
+ .gate = HW_SW_GATE(0x0468, 18, 2, 3),
+ .clocks = CLOCKS("ref_crystal",
+ "var_104m"),
+ .sel = SELECTOR(0x0a70, 0, 2),
+ .div = DIVIDER(0x0a70, 4, 3),
+ .trig = TRIGGER(0x0afc, 15),
+};
+
+/*
+ * CCU setup routines
+ *
+ * These are called from kona_dt_ccu_setup() to initialize the array
+ * of clocks provided by the CCU. Once allocated, the entries in
+ * the array are initialized by calling kona_clk_setup() with the
+ * initialization data for each clock. They return 0 if successful
+ * or an error code otherwise.
+ */
+static int __init bcm281xx_root_ccu_clks_setup(struct ccu_data *ccu)
+{
+ struct clk **clks;
+ size_t count = BCM281XX_ROOT_CCU_CLOCK_COUNT;
+
+ clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ pr_err("%s: failed to allocate root clocks\n", __func__);
+ return -ENOMEM;
+ }
+ ccu->data.clks = clks;
+ ccu->data.clk_num = count;
+
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_ROOT_CCU_FRAC_1M, frac_1m);
+
+ return 0;
+}
+
+static int __init bcm281xx_aon_ccu_clks_setup(struct ccu_data *ccu)
+{
+ struct clk **clks;
+ size_t count = BCM281XX_AON_CCU_CLOCK_COUNT;
+
+ clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ pr_err("%s: failed to allocate aon clocks\n", __func__);
+ return -ENOMEM;
+ }
+ ccu->data.clks = clks;
+ ccu->data.clk_num = count;
+
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_HUB_TIMER, hub_timer);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC, pmu_bsc);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_AON_CCU_PMU_BSC_VAR, pmu_bsc_var);
+
+ return 0;
+}
+
+static int __init bcm281xx_hub_ccu_clks_setup(struct ccu_data *ccu)
+{
+ struct clk **clks;
+ size_t count = BCM281XX_HUB_CCU_CLOCK_COUNT;
+
+ clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ pr_err("%s: failed to allocate hub clocks\n", __func__);
+ return -ENOMEM;
+ }
+ ccu->data.clks = clks;
+ ccu->data.clk_num = count;
+
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_HUB_CCU_TMON_1M, tmon_1m);
+
+ return 0;
+}
+
+static int __init bcm281xx_master_ccu_clks_setup(struct ccu_data *ccu)
+{
+ struct clk **clks;
+ size_t count = BCM281XX_MASTER_CCU_CLOCK_COUNT;
+
+ clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ pr_err("%s: failed to allocate master clocks\n", __func__);
+ return -ENOMEM;
+ }
+ ccu->data.clks = clks;
+ ccu->data.clk_num = count;
+
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO1, sdio1);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO2, sdio2);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO3, sdio3);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_SDIO4, sdio4);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_USB_IC, usb_ic);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_48M, hsic2_48m);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_MASTER_CCU_HSIC2_12M, hsic2_12m);
+
+ return 0;
+}
+
+static int __init bcm281xx_slave_ccu_clks_setup(struct ccu_data *ccu)
+{
+ struct clk **clks;
+ size_t count = BCM281XX_SLAVE_CCU_CLOCK_COUNT;
+
+ clks = kzalloc(count * sizeof(*clks), GFP_KERNEL);
+ if (!clks) {
+ pr_err("%s: failed to allocate slave clocks\n", __func__);
+ return -ENOMEM;
+ }
+ ccu->data.clks = clks;
+ ccu->data.clk_num = count;
+
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB, uartb);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB2, uartb2);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB3, uartb3);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_UARTB4, uartb4);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP0, ssp0);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_SSP2, ssp2);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC1, bsc1);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC2, bsc2);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_BSC3, bsc3);
+ PERI_CLK_SETUP(clks, ccu, BCM281XX_SLAVE_CCU_PWM, pwm);
+
+ return 0;
+}
+
+/* Device tree match table callback functions */
+
+static void __init kona_dt_root_ccu_setup(struct device_node *node)
+{
+ kona_dt_ccu_setup(node, bcm281xx_root_ccu_clks_setup);
+}
+
+static void __init kona_dt_aon_ccu_setup(struct device_node *node)
+{
+ kona_dt_ccu_setup(node, bcm281xx_aon_ccu_clks_setup);
+}
+
+static void __init kona_dt_hub_ccu_setup(struct device_node *node)
+{
+ kona_dt_ccu_setup(node, bcm281xx_hub_ccu_clks_setup);
+}
+
+static void __init kona_dt_master_ccu_setup(struct device_node *node)
+{
+ kona_dt_ccu_setup(node, bcm281xx_master_ccu_clks_setup);
+}
+
+static void __init kona_dt_slave_ccu_setup(struct device_node *node)
+{
+ kona_dt_ccu_setup(node, bcm281xx_slave_ccu_clks_setup);
+}
+
+CLK_OF_DECLARE(bcm11351_root_ccu, BCM11351_DT_ROOT_CCU_COMPAT,
+ kona_dt_root_ccu_setup);
+CLK_OF_DECLARE(bcm11351_aon_ccu, BCM11351_DT_AON_CCU_COMPAT,
+ kona_dt_aon_ccu_setup);
+CLK_OF_DECLARE(bcm11351_hub_ccu, BCM11351_DT_HUB_CCU_COMPAT,
+ kona_dt_hub_ccu_setup);
+CLK_OF_DECLARE(bcm11351_master_ccu, BCM11351_DT_MASTER_CCU_COMPAT,
+ kona_dt_master_ccu_setup);
+CLK_OF_DECLARE(bcm11351_slave_ccu, BCM11351_DT_SLAVE_CCU_COMPAT,
+ kona_dt_slave_ccu_setup);
--- /dev/null
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/of_address.h>
+
+#include "clk-kona.h"
+
+/* These are used when a selector or trigger is found to be unneeded */
+#define selector_clear_exists(sel) ((sel)->width = 0)
+#define trigger_clear_exists(trig) FLAG_CLEAR(trig, TRIG, EXISTS)
+
+LIST_HEAD(ccu_list); /* The list of set up CCUs */
+
+/* Validity checking */
+
+static bool clk_requires_trigger(struct kona_clk *bcm_clk)
+{
+ struct peri_clk_data *peri = bcm_clk->peri;
+ struct bcm_clk_sel *sel;
+ struct bcm_clk_div *div;
+
+ if (bcm_clk->type != bcm_clk_peri)
+ return false;
+
+ sel = &peri->sel;
+ if (sel->parent_count && selector_exists(sel))
+ return true;
+
+ div = &peri->div;
+ if (!divider_exists(div))
+ return false;
+
+ /* Fixed dividers don't need triggers */
+ if (!divider_is_fixed(div))
+ return true;
+
+ div = &peri->pre_div;
+
+ return divider_exists(div) && !divider_is_fixed(div);
+}
+
+static bool peri_clk_data_offsets_valid(struct kona_clk *bcm_clk)
+{
+ struct peri_clk_data *peri;
+ struct bcm_clk_gate *gate;
+ struct bcm_clk_div *div;
+ struct bcm_clk_sel *sel;
+ struct bcm_clk_trig *trig;
+ const char *name;
+ u32 range;
+ u32 limit;
+
+ BUG_ON(bcm_clk->type != bcm_clk_peri);
+ peri = bcm_clk->peri;
+ name = bcm_clk->name;
+ range = bcm_clk->ccu->range;
+
+ limit = range - sizeof(u32);
+ limit = round_down(limit, sizeof(u32));
+
+ gate = &peri->gate;
+ if (gate_exists(gate)) {
+ if (gate->offset > limit) {
+ pr_err("%s: bad gate offset for %s (%u > %u)\n",
+ __func__, name, gate->offset, limit);
+ return false;
+ }
+ }
+
+ div = &peri->div;
+ if (divider_exists(div)) {
+ if (div->offset > limit) {
+ pr_err("%s: bad divider offset for %s (%u > %u)\n",
+ __func__, name, div->offset, limit);
+ return false;
+ }
+ }
+
+ div = &peri->pre_div;
+ if (divider_exists(div)) {
+ if (div->offset > limit) {
+ pr_err("%s: bad pre-divider offset for %s "
+ "(%u > %u)\n",
+ __func__, name, div->offset, limit);
+ return false;
+ }
+ }
+
+ sel = &peri->sel;
+ if (selector_exists(sel)) {
+ if (sel->offset > limit) {
+ pr_err("%s: bad selector offset for %s (%u > %u)\n",
+ __func__, name, sel->offset, limit);
+ return false;
+ }
+ }
+
+ trig = &peri->trig;
+ if (trigger_exists(trig)) {
+ if (trig->offset > limit) {
+ pr_err("%s: bad trigger offset for %s (%u > %u)\n",
+ __func__, name, trig->offset, limit);
+ return false;
+ }
+ }
+
+ trig = &peri->pre_trig;
+ if (trigger_exists(trig)) {
+ if (trig->offset > limit) {
+ pr_err("%s: bad pre-trigger offset for %s (%u > %u)\n",
+ __func__, name, trig->offset, limit);
+ return false;
+ }
+ }
+
+ return true;
+}
+
+/* A bit position must be less than the number of bits in a 32-bit register. */
+static bool bit_posn_valid(u32 bit_posn, const char *field_name,
+ const char *clock_name)
+{
+ u32 limit = BITS_PER_BYTE * sizeof(u32) - 1;
+
+ if (bit_posn > limit) {
+ pr_err("%s: bad %s bit for %s (%u > %u)\n", __func__,
+ field_name, clock_name, bit_posn, limit);
+ return false;
+ }
+ return true;
+}
+
+/*
+ * A bitfield must be at least 1 bit wide. Both the low-order and
+ * high-order bits must lie within a 32-bit register. We require
+ * fields to be less than 32 bits wide, mainly because we use
+ * shifting to produce field masks, and shifting a full word width
+ * is not well-defined by the C standard.
+ */
+static bool bitfield_valid(u32 shift, u32 width, const char *field_name,
+ const char *clock_name)
+{
+ u32 limit = BITS_PER_BYTE * sizeof(u32);
+
+ if (!width) {
+ pr_err("%s: bad %s field width 0 for %s\n", __func__,
+ field_name, clock_name);
+ return false;
+ }
+ if (shift + width > limit) {
+ pr_err("%s: bad %s for %s (%u + %u > %u)\n", __func__,
+ field_name, clock_name, shift, width, limit);
+ return false;
+ }
+ return true;
+}
+
+/*
+ * All gates, if defined, have a status bit, and for hardware-only
+ * gates, that's it. Gates that can be software controlled also
+ * have an enable bit. And a gate that can be hardware or software
+ * controlled will have a hardware/software select bit.
+ */
+static bool gate_valid(struct bcm_clk_gate *gate, const char *field_name,
+ const char *clock_name)
+{
+ if (!bit_posn_valid(gate->status_bit, "gate status", clock_name))
+ return false;
+
+ if (gate_is_sw_controllable(gate)) {
+ if (!bit_posn_valid(gate->en_bit, "gate enable", clock_name))
+ return false;
+
+ if (gate_is_hw_controllable(gate)) {
+ if (!bit_posn_valid(gate->hw_sw_sel_bit,
+ "gate hw/sw select",
+ clock_name))
+ return false;
+ }
+ } else {
+ BUG_ON(!gate_is_hw_controllable(gate));
+ }
+
+ return true;
+}
+
+/*
+ * A selector bitfield must be valid. Its parent_sel array must
+ * also be reasonable for the field.
+ */
+static bool sel_valid(struct bcm_clk_sel *sel, const char *field_name,
+ const char *clock_name)
+{
+ if (!bitfield_valid(sel->shift, sel->width, field_name, clock_name))
+ return false;
+
+ if (sel->parent_count) {
+ u32 max_sel;
+ u32 limit;
+
+ /*
+ * Make sure the selector field can hold all the
+ * selector values we expect to be able to use. A
+ * clock only needs to have a selector defined if it
+ * has more than one parent. And in that case the
+ * highest selector value will be in the last entry
+ * in the array.
+ */
+ max_sel = sel->parent_sel[sel->parent_count - 1];
+ limit = (1 << sel->width) - 1;
+ if (max_sel > limit) {
+ pr_err("%s: bad selector for %s "
+ "(%u needs > %u bits)\n",
+ __func__, clock_name, max_sel,
+ sel->width);
+ return false;
+ }
+ } else {
+ pr_warn("%s: ignoring selector for %s (no parents)\n",
+ __func__, clock_name);
+ selector_clear_exists(sel);
+ kfree(sel->parent_sel);
+ sel->parent_sel = NULL;
+ }
+
+ return true;
+}
+
+/*
+ * A fixed divider just needs to be non-zero. A variable divider
+ * has to have a valid divider bitfield, and if it has a fraction,
+ * the width of the fraction must not be no more than the width of
+ * the divider as a whole.
+ */
+static bool div_valid(struct bcm_clk_div *div, const char *field_name,
+ const char *clock_name)
+{
+ if (divider_is_fixed(div)) {
+ /* Any fixed divider value but 0 is OK */
+ if (div->fixed == 0) {
+ pr_err("%s: bad %s fixed value 0 for %s\n", __func__,
+ field_name, clock_name);
+ return false;
+ }
+ return true;
+ }
+ if (!bitfield_valid(div->shift, div->width, field_name, clock_name))
+ return false;
+
+ if (divider_has_fraction(div))
+ if (div->frac_width > div->width) {
+ pr_warn("%s: bad %s fraction width for %s (%u > %u)\n",
+ __func__, field_name, clock_name,
+ div->frac_width, div->width);
+ return false;
+ }
+
+ return true;
+}
+
+/*
+ * If a clock has two dividers, the combined number of fractional
+ * bits must be representable in a 32-bit unsigned value. This
+ * is because we scale up a dividend using both dividers before
+ * dividing to improve accuracy, and we need to avoid overflow.
+ */
+static bool kona_dividers_valid(struct kona_clk *bcm_clk)
+{
+ struct peri_clk_data *peri = bcm_clk->peri;
+ struct bcm_clk_div *div;
+ struct bcm_clk_div *pre_div;
+ u32 limit;
+
+ BUG_ON(bcm_clk->type != bcm_clk_peri);
+
+ if (!divider_exists(&peri->div) || !divider_exists(&peri->pre_div))
+ return true;
+
+ div = &peri->div;
+ pre_div = &peri->pre_div;
+ if (divider_is_fixed(div) || divider_is_fixed(pre_div))
+ return true;
+
+ limit = BITS_PER_BYTE * sizeof(u32);
+
+ return div->frac_width + pre_div->frac_width <= limit;
+}
+
+
+/* A trigger just needs to represent a valid bit position */
+static bool trig_valid(struct bcm_clk_trig *trig, const char *field_name,
+ const char *clock_name)
+{
+ return bit_posn_valid(trig->bit, field_name, clock_name);
+}
+
+/* Determine whether the set of peripheral clock registers are valid. */
+static bool
+peri_clk_data_valid(struct kona_clk *bcm_clk)
+{
+ struct peri_clk_data *peri;
+ struct bcm_clk_gate *gate;
+ struct bcm_clk_sel *sel;
+ struct bcm_clk_div *div;
+ struct bcm_clk_div *pre_div;
+ struct bcm_clk_trig *trig;
+ const char *name;
+
+ BUG_ON(bcm_clk->type != bcm_clk_peri);
+
+ /*
+ * First validate register offsets. This is the only place
+ * where we need something from the ccu, so we do these
+ * together.
+ */
+ if (!peri_clk_data_offsets_valid(bcm_clk))
+ return false;
+
+ peri = bcm_clk->peri;
+ name = bcm_clk->name;
+ gate = &peri->gate;
+ if (gate_exists(gate) && !gate_valid(gate, "gate", name))
+ return false;
+
+ sel = &peri->sel;
+ if (selector_exists(sel)) {
+ if (!sel_valid(sel, "selector", name))
+ return false;
+
+ } else if (sel->parent_count > 1) {
+ pr_err("%s: multiple parents but no selector for %s\n",
+ __func__, name);
+
+ return false;
+ }
+
+ div = &peri->div;
+ pre_div = &peri->pre_div;
+ if (divider_exists(div)) {
+ if (!div_valid(div, "divider", name))
+ return false;
+
+ if (divider_exists(pre_div))
+ if (!div_valid(pre_div, "pre-divider", name))
+ return false;
+ } else if (divider_exists(pre_div)) {
+ pr_err("%s: pre-divider but no divider for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ trig = &peri->trig;
+ if (trigger_exists(trig)) {
+ if (!trig_valid(trig, "trigger", name))
+ return false;
+
+ if (trigger_exists(&peri->pre_trig)) {
+ if (!trig_valid(trig, "pre-trigger", name)) {
+ return false;
+ }
+ }
+ if (!clk_requires_trigger(bcm_clk)) {
+ pr_warn("%s: ignoring trigger for %s (not needed)\n",
+ __func__, name);
+ trigger_clear_exists(trig);
+ }
+ } else if (trigger_exists(&peri->pre_trig)) {
+ pr_err("%s: pre-trigger but no trigger for %s\n", __func__,
+ name);
+ return false;
+ } else if (clk_requires_trigger(bcm_clk)) {
+ pr_err("%s: required trigger missing for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ return kona_dividers_valid(bcm_clk);
+}
+
+static bool kona_clk_valid(struct kona_clk *bcm_clk)
+{
+ switch (bcm_clk->type) {
+ case bcm_clk_peri:
+ if (!peri_clk_data_valid(bcm_clk))
+ return false;
+ break;
+ default:
+ pr_err("%s: unrecognized clock type (%d)\n", __func__,
+ (int)bcm_clk->type);
+ return false;
+ }
+ return true;
+}
+
+/*
+ * Scan an array of parent clock names to determine whether there
+ * are any entries containing BAD_CLK_NAME. Such entries are
+ * placeholders for non-supported clocks. Keep track of the
+ * position of each clock name in the original array.
+ *
+ * Allocates an array of pointers to to hold the names of all
+ * non-null entries in the original array, and returns a pointer to
+ * that array in *names. This will be used for registering the
+ * clock with the common clock code. On successful return,
+ * *count indicates how many entries are in that names array.
+ *
+ * If there is more than one entry in the resulting names array,
+ * another array is allocated to record the parent selector value
+ * for each (defined) parent clock. This is the value that
+ * represents this parent clock in the clock's source selector
+ * register. The position of the clock in the original parent array
+ * defines that selector value. The number of entries in this array
+ * is the same as the number of entries in the parent names array.
+ *
+ * The array of selector values is returned. If the clock has no
+ * parents, no selector is required and a null pointer is returned.
+ *
+ * Returns a null pointer if the clock names array supplied was
+ * null. (This is not an error.)
+ *
+ * Returns a pointer-coded error if an error occurs.
+ */
+static u32 *parent_process(const char *clocks[],
+ u32 *count, const char ***names)
+{
+ static const char **parent_names;
+ static u32 *parent_sel;
+ const char **clock;
+ u32 parent_count;
+ u32 bad_count = 0;
+ u32 orig_count;
+ u32 i;
+ u32 j;
+
+ *count = 0; /* In case of early return */
+ *names = NULL;
+ if (!clocks)
+ return NULL;
+
+ /*
+ * Count the number of names in the null-terminated array,
+ * and find out how many of those are actually clock names.
+ */
+ for (clock = clocks; *clock; clock++)
+ if (*clock == BAD_CLK_NAME)
+ bad_count++;
+ orig_count = (u32)(clock - clocks);
+ parent_count = orig_count - bad_count;
+
+ /* If all clocks are unsupported, we treat it as no clock */
+ if (!parent_count)
+ return NULL;
+
+ /* Avoid exceeding our parent clock limit */
+ if (parent_count > PARENT_COUNT_MAX) {
+ pr_err("%s: too many parents (%u > %u)\n", __func__,
+ parent_count, PARENT_COUNT_MAX);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /*
+ * There is one parent name for each defined parent clock.
+ * We also maintain an array containing the selector value
+ * for each defined clock. If there's only one clock, the
+ * selector is not required, but we allocate space for the
+ * array anyway to keep things simple.
+ */
+ parent_names = kmalloc(parent_count * sizeof(parent_names), GFP_KERNEL);
+ if (!parent_names) {
+ pr_err("%s: error allocating %u parent names\n", __func__,
+ parent_count);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* There is at least one parent, so allocate a selector array */
+
+ parent_sel = kmalloc(parent_count * sizeof(*parent_sel), GFP_KERNEL);
+ if (!parent_sel) {
+ pr_err("%s: error allocating %u parent selectors\n", __func__,
+ parent_count);
+ kfree(parent_names);
+
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /* Now fill in the parent names and selector arrays */
+ for (i = 0, j = 0; i < orig_count; i++) {
+ if (clocks[i] != BAD_CLK_NAME) {
+ parent_names[j] = clocks[i];
+ parent_sel[j] = i;
+ j++;
+ }
+ }
+ *names = parent_names;
+ *count = parent_count;
+
+ return parent_sel;
+}
+
+static int
+clk_sel_setup(const char **clocks, struct bcm_clk_sel *sel,
+ struct clk_init_data *init_data)
+{
+ const char **parent_names = NULL;
+ u32 parent_count = 0;
+ u32 *parent_sel;
+
+ /*
+ * If a peripheral clock has multiple parents, the value
+ * used by the hardware to select that parent is represented
+ * by the parent clock's position in the "clocks" list. Some
+ * values don't have defined or supported clocks; these will
+ * have BAD_CLK_NAME entries in the parents[] array. The
+ * list is terminated by a NULL entry.
+ *
+ * We need to supply (only) the names of defined parent
+ * clocks when registering a clock though, so we use an
+ * array of parent selector values to map between the
+ * indexes the common clock code uses and the selector
+ * values we need.
+ */
+ parent_sel = parent_process(clocks, &parent_count, &parent_names);
+ if (IS_ERR(parent_sel)) {
+ int ret = PTR_ERR(parent_sel);
+
+ pr_err("%s: error processing parent clocks for %s (%d)\n",
+ __func__, init_data->name, ret);
+
+ return ret;
+ }
+
+ init_data->parent_names = parent_names;
+ init_data->num_parents = parent_count;
+
+ sel->parent_count = parent_count;
+ sel->parent_sel = parent_sel;
+
+ return 0;
+}
+
+static void clk_sel_teardown(struct bcm_clk_sel *sel,
+ struct clk_init_data *init_data)
+{
+ kfree(sel->parent_sel);
+ sel->parent_sel = NULL;
+ sel->parent_count = 0;
+
+ init_data->num_parents = 0;
+ kfree(init_data->parent_names);
+ init_data->parent_names = NULL;
+}
+
+static void peri_clk_teardown(struct peri_clk_data *data,
+ struct clk_init_data *init_data)
+{
+ clk_sel_teardown(&data->sel, init_data);
+ init_data->ops = NULL;
+}
+
+/*
+ * Caller is responsible for freeing the parent_names[] and
+ * parent_sel[] arrays in the peripheral clock's "data" structure
+ * that can be assigned if the clock has one or more parent clocks
+ * associated with it.
+ */
+static int peri_clk_setup(struct ccu_data *ccu, struct peri_clk_data *data,
+ struct clk_init_data *init_data)
+{
+ init_data->ops = &kona_peri_clk_ops;
+ init_data->flags = CLK_IGNORE_UNUSED;
+
+ return clk_sel_setup(data->clocks, &data->sel, init_data);
+}
+
+static void bcm_clk_teardown(struct kona_clk *bcm_clk)
+{
+ switch (bcm_clk->type) {
+ case bcm_clk_peri:
+ peri_clk_teardown(bcm_clk->data, &bcm_clk->init_data);
+ break;
+ default:
+ break;
+ }
+ bcm_clk->data = NULL;
+ bcm_clk->type = bcm_clk_none;
+}
+
+static void kona_clk_teardown(struct clk *clk)
+{
+ struct clk_hw *hw;
+ struct kona_clk *bcm_clk;
+
+ if (!clk)
+ return;
+
+ hw = __clk_get_hw(clk);
+ if (!hw) {
+ pr_err("%s: clk %p has null hw pointer\n", __func__, clk);
+ return;
+ }
+ clk_unregister(clk);
+
+ bcm_clk = to_kona_clk(hw);
+ bcm_clk_teardown(bcm_clk);
+}
+
+struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name,
+ enum bcm_clk_type type, void *data)
+{
+ struct kona_clk *bcm_clk;
+ struct clk_init_data *init_data;
+ struct clk *clk = NULL;
+
+ bcm_clk = kzalloc(sizeof(*bcm_clk), GFP_KERNEL);
+ if (!bcm_clk) {
+ pr_err("%s: failed to allocate bcm_clk for %s\n", __func__,
+ name);
+ return NULL;
+ }
+ bcm_clk->ccu = ccu;
+ bcm_clk->name = name;
+
+ init_data = &bcm_clk->init_data;
+ init_data->name = name;
+ switch (type) {
+ case bcm_clk_peri:
+ if (peri_clk_setup(ccu, data, init_data))
+ goto out_free;
+ break;
+ default:
+ data = NULL;
+ break;
+ }
+ bcm_clk->type = type;
+ bcm_clk->data = data;
+
+ /* Make sure everything makes sense before we set it up */
+ if (!kona_clk_valid(bcm_clk)) {
+ pr_err("%s: clock data invalid for %s\n", __func__, name);
+ goto out_teardown;
+ }
+
+ bcm_clk->hw.init = init_data;
+ clk = clk_register(NULL, &bcm_clk->hw);
+ if (IS_ERR(clk)) {
+ pr_err("%s: error registering clock %s (%ld)\n", __func__,
+ name, PTR_ERR(clk));
+ goto out_teardown;
+ }
+ BUG_ON(!clk);
+
+ return clk;
+out_teardown:
+ bcm_clk_teardown(bcm_clk);
+out_free:
+ kfree(bcm_clk);
+
+ return NULL;
+}
+
+static void ccu_clks_teardown(struct ccu_data *ccu)
+{
+ u32 i;
+
+ for (i = 0; i < ccu->data.clk_num; i++)
+ kona_clk_teardown(ccu->data.clks[i]);
+ kfree(ccu->data.clks);
+}
+
+static void kona_ccu_teardown(struct ccu_data *ccu)
+{
+ if (!ccu)
+ return;
+
+ if (!ccu->base)
+ goto done;
+
+ of_clk_del_provider(ccu->node); /* safe if never added */
+ ccu_clks_teardown(ccu);
+ list_del(&ccu->links);
+ of_node_put(ccu->node);
+ iounmap(ccu->base);
+done:
+ kfree(ccu->name);
+ kfree(ccu);
+}
+
+/*
+ * Set up a CCU. Call the provided ccu_clks_setup callback to
+ * initialize the array of clocks provided by the CCU.
+ */
+void __init kona_dt_ccu_setup(struct device_node *node,
+ int (*ccu_clks_setup)(struct ccu_data *))
+{
+ struct ccu_data *ccu;
+ struct resource res = { 0 };
+ resource_size_t range;
+ int ret;
+
+ ccu = kzalloc(sizeof(*ccu), GFP_KERNEL);
+ if (ccu)
+ ccu->name = kstrdup(node->name, GFP_KERNEL);
+ if (!ccu || !ccu->name) {
+ pr_err("%s: unable to allocate CCU struct for %s\n",
+ __func__, node->name);
+ kfree(ccu);
+
+ return;
+ }
+
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret) {
+ pr_err("%s: no valid CCU registers found for %s\n", __func__,
+ node->name);
+ goto out_err;
+ }
+
+ range = resource_size(&res);
+ if (range > (resource_size_t)U32_MAX) {
+ pr_err("%s: address range too large for %s\n", __func__,
+ node->name);
+ goto out_err;
+ }
+
+ ccu->range = (u32)range;
+ ccu->base = ioremap(res.start, ccu->range);
+ if (!ccu->base) {
+ pr_err("%s: unable to map CCU registers for %s\n", __func__,
+ node->name);
+ goto out_err;
+ }
+
+ spin_lock_init(&ccu->lock);
+ INIT_LIST_HEAD(&ccu->links);
+ ccu->node = of_node_get(node);
+
+ list_add_tail(&ccu->links, &ccu_list);
+
+ /* Set up clocks array (in ccu->data) */
+ if (ccu_clks_setup(ccu))
+ goto out_err;
+
+ ret = of_clk_add_provider(node, of_clk_src_onecell_get, &ccu->data);
+ if (ret) {
+ pr_err("%s: error adding ccu %s as provider (%d)\n", __func__,
+ node->name, ret);
+ goto out_err;
+ }
+
+ if (!kona_ccu_init(ccu))
+ pr_err("Broadcom %s initialization had errors\n", node->name);
+
+ return;
+out_err:
+ kona_ccu_teardown(ccu);
+ pr_err("Broadcom %s setup aborted\n", node->name);
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include "clk-kona.h"
+
+#include <linux/delay.h>
+
+#define CCU_ACCESS_PASSWORD 0xA5A500
+#define CLK_GATE_DELAY_LOOP 2000
+
+/* Bitfield operations */
+
+/* Produces a mask of set bits covering a range of a 32-bit value */
+static inline u32 bitfield_mask(u32 shift, u32 width)
+{
+ return ((1 << width) - 1) << shift;
+}
+
+/* Extract the value of a bitfield found within a given register value */
+static inline u32 bitfield_extract(u32 reg_val, u32 shift, u32 width)
+{
+ return (reg_val & bitfield_mask(shift, width)) >> shift;
+}
+
+/* Replace the value of a bitfield found within a given register value */
+static inline u32 bitfield_replace(u32 reg_val, u32 shift, u32 width, u32 val)
+{
+ u32 mask = bitfield_mask(shift, width);
+
+ return (reg_val & ~mask) | (val << shift);
+}
+
+/* Divider and scaling helpers */
+
+/*
+ * Implement DIV_ROUND_CLOSEST() for 64-bit dividend and both values
+ * unsigned. Note that unlike do_div(), the remainder is discarded
+ * and the return value is the quotient (not the remainder).
+ */
+u64 do_div_round_closest(u64 dividend, unsigned long divisor)
+{
+ u64 result;
+
+ result = dividend + ((u64)divisor >> 1);
+ (void)do_div(result, divisor);
+
+ return result;
+}
+
+/* Convert a divider into the scaled divisor value it represents. */
+static inline u64 scaled_div_value(struct bcm_clk_div *div, u32 reg_div)
+{
+ return (u64)reg_div + ((u64)1 << div->frac_width);
+}
+
+/*
+ * Build a scaled divider value as close as possible to the
+ * given whole part (div_value) and fractional part (expressed
+ * in billionths).
+ */
+u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value, u32 billionths)
+{
+ u64 combined;
+
+ BUG_ON(!div_value);
+ BUG_ON(billionths >= BILLION);
+
+ combined = (u64)div_value * BILLION + billionths;
+ combined <<= div->frac_width;
+
+ return do_div_round_closest(combined, BILLION);
+}
+
+/* The scaled minimum divisor representable by a divider */
+static inline u64
+scaled_div_min(struct bcm_clk_div *div)
+{
+ if (divider_is_fixed(div))
+ return (u64)div->fixed;
+
+ return scaled_div_value(div, 0);
+}
+
+/* The scaled maximum divisor representable by a divider */
+u64 scaled_div_max(struct bcm_clk_div *div)
+{
+ u32 reg_div;
+
+ if (divider_is_fixed(div))
+ return (u64)div->fixed;
+
+ reg_div = ((u32)1 << div->width) - 1;
+
+ return scaled_div_value(div, reg_div);
+}
+
+/*
+ * Convert a scaled divisor into its divider representation as
+ * stored in a divider register field.
+ */
+static inline u32
+divider(struct bcm_clk_div *div, u64 scaled_div)
+{
+ BUG_ON(scaled_div < scaled_div_min(div));
+ BUG_ON(scaled_div > scaled_div_max(div));
+
+ return (u32)(scaled_div - ((u64)1 << div->frac_width));
+}
+
+/* Return a rate scaled for use when dividing by a scaled divisor. */
+static inline u64
+scale_rate(struct bcm_clk_div *div, u32 rate)
+{
+ if (divider_is_fixed(div))
+ return (u64)rate;
+
+ return (u64)rate << div->frac_width;
+}
+
+/* CCU access */
+
+/* Read a 32-bit register value from a CCU's address space. */
+static inline u32 __ccu_read(struct ccu_data *ccu, u32 reg_offset)
+{
+ return readl(ccu->base + reg_offset);
+}
+
+/* Write a 32-bit register value into a CCU's address space. */
+static inline void
+__ccu_write(struct ccu_data *ccu, u32 reg_offset, u32 reg_val)
+{
+ writel(reg_val, ccu->base + reg_offset);
+}
+
+static inline unsigned long ccu_lock(struct ccu_data *ccu)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ccu->lock, flags);
+
+ return flags;
+}
+static inline void ccu_unlock(struct ccu_data *ccu, unsigned long flags)
+{
+ spin_unlock_irqrestore(&ccu->lock, flags);
+}
+
+/*
+ * Enable/disable write access to CCU protected registers. The
+ * WR_ACCESS register for all CCUs is at offset 0.
+ */
+static inline void __ccu_write_enable(struct ccu_data *ccu)
+{
+ if (ccu->write_enabled) {
+ pr_err("%s: access already enabled for %s\n", __func__,
+ ccu->name);
+ return;
+ }
+ ccu->write_enabled = true;
+ __ccu_write(ccu, 0, CCU_ACCESS_PASSWORD | 1);
+}
+
+static inline void __ccu_write_disable(struct ccu_data *ccu)
+{
+ if (!ccu->write_enabled) {
+ pr_err("%s: access wasn't enabled for %s\n", __func__,
+ ccu->name);
+ return;
+ }
+
+ __ccu_write(ccu, 0, CCU_ACCESS_PASSWORD);
+ ccu->write_enabled = false;
+}
+
+/*
+ * Poll a register in a CCU's address space, returning when the
+ * specified bit in that register's value is set (or clear). Delay
+ * a microsecond after each read of the register. Returns true if
+ * successful, or false if we gave up trying.
+ *
+ * Caller must ensure the CCU lock is held.
+ */
+static inline bool
+__ccu_wait_bit(struct ccu_data *ccu, u32 reg_offset, u32 bit, bool want)
+{
+ unsigned int tries;
+ u32 bit_mask = 1 << bit;
+
+ for (tries = 0; tries < CLK_GATE_DELAY_LOOP; tries++) {
+ u32 val;
+ bool bit_val;
+
+ val = __ccu_read(ccu, reg_offset);
+ bit_val = (val & bit_mask) != 0;
+ if (bit_val == want)
+ return true;
+ udelay(1);
+ }
+ return false;
+}
+
+/* Gate operations */
+
+/* Determine whether a clock is gated. CCU lock must be held. */
+static bool
+__is_clk_gate_enabled(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+ u32 bit_mask;
+ u32 reg_val;
+
+ /* If there is no gate we can assume it's enabled. */
+ if (!gate_exists(gate))
+ return true;
+
+ bit_mask = 1 << gate->status_bit;
+ reg_val = __ccu_read(ccu, gate->offset);
+
+ return (reg_val & bit_mask) != 0;
+}
+
+/* Determine whether a clock is gated. */
+static bool
+is_clk_gate_enabled(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+ long flags;
+ bool ret;
+
+ /* Avoid taking the lock if we can */
+ if (!gate_exists(gate))
+ return true;
+
+ flags = ccu_lock(ccu);
+ ret = __is_clk_gate_enabled(ccu, gate);
+ ccu_unlock(ccu, flags);
+
+ return ret;
+}
+
+/*
+ * Commit our desired gate state to the hardware.
+ * Returns true if successful, false otherwise.
+ */
+static bool
+__gate_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+ u32 reg_val;
+ u32 mask;
+ bool enabled = false;
+
+ BUG_ON(!gate_exists(gate));
+ if (!gate_is_sw_controllable(gate))
+ return true; /* Nothing we can change */
+
+ reg_val = __ccu_read(ccu, gate->offset);
+
+ /* For a hardware/software gate, set which is in control */
+ if (gate_is_hw_controllable(gate)) {
+ mask = (u32)1 << gate->hw_sw_sel_bit;
+ if (gate_is_sw_managed(gate))
+ reg_val |= mask;
+ else
+ reg_val &= ~mask;
+ }
+
+ /*
+ * If software is in control, enable or disable the gate.
+ * If hardware is, clear the enabled bit for good measure.
+ * If a software controlled gate can't be disabled, we're
+ * required to write a 0 into the enable bit (but the gate
+ * will be enabled).
+ */
+ mask = (u32)1 << gate->en_bit;
+ if (gate_is_sw_managed(gate) && (enabled = gate_is_enabled(gate)) &&
+ !gate_is_no_disable(gate))
+ reg_val |= mask;
+ else
+ reg_val &= ~mask;
+
+ __ccu_write(ccu, gate->offset, reg_val);
+
+ /* For a hardware controlled gate, we're done */
+ if (!gate_is_sw_managed(gate))
+ return true;
+
+ /* Otherwise wait for the gate to be in desired state */
+ return __ccu_wait_bit(ccu, gate->offset, gate->status_bit, enabled);
+}
+
+/*
+ * Initialize a gate. Our desired state (hardware/software select,
+ * and if software, its enable state) is committed to hardware
+ * without the usual checks to see if it's already set up that way.
+ * Returns true if successful, false otherwise.
+ */
+static bool gate_init(struct ccu_data *ccu, struct bcm_clk_gate *gate)
+{
+ if (!gate_exists(gate))
+ return true;
+ return __gate_commit(ccu, gate);
+}
+
+/*
+ * Set a gate to enabled or disabled state. Does nothing if the
+ * gate is not currently under software control, or if it is already
+ * in the requested state. Returns true if successful, false
+ * otherwise. CCU lock must be held.
+ */
+static bool
+__clk_gate(struct ccu_data *ccu, struct bcm_clk_gate *gate, bool enable)
+{
+ bool ret;
+
+ if (!gate_exists(gate) || !gate_is_sw_managed(gate))
+ return true; /* Nothing to do */
+
+ if (!enable && gate_is_no_disable(gate)) {
+ pr_warn("%s: invalid gate disable request (ignoring)\n",
+ __func__);
+ return true;
+ }
+
+ if (enable == gate_is_enabled(gate))
+ return true; /* No change */
+
+ gate_flip_enabled(gate);
+ ret = __gate_commit(ccu, gate);
+ if (!ret)
+ gate_flip_enabled(gate); /* Revert the change */
+
+ return ret;
+}
+
+/* Enable or disable a gate. Returns 0 if successful, -EIO otherwise */
+static int clk_gate(struct ccu_data *ccu, const char *name,
+ struct bcm_clk_gate *gate, bool enable)
+{
+ unsigned long flags;
+ bool success;
+
+ /*
+ * Avoid taking the lock if we can. We quietly ignore
+ * requests to change state that don't make sense.
+ */
+ if (!gate_exists(gate) || !gate_is_sw_managed(gate))
+ return 0;
+ if (!enable && gate_is_no_disable(gate))
+ return 0;
+
+ flags = ccu_lock(ccu);
+ __ccu_write_enable(ccu);
+
+ success = __clk_gate(ccu, gate, enable);
+
+ __ccu_write_disable(ccu);
+ ccu_unlock(ccu, flags);
+
+ if (success)
+ return 0;
+
+ pr_err("%s: failed to %s gate for %s\n", __func__,
+ enable ? "enable" : "disable", name);
+
+ return -EIO;
+}
+
+/* Trigger operations */
+
+/*
+ * Caller must ensure CCU lock is held and access is enabled.
+ * Returns true if successful, false otherwise.
+ */
+static bool __clk_trigger(struct ccu_data *ccu, struct bcm_clk_trig *trig)
+{
+ /* Trigger the clock and wait for it to finish */
+ __ccu_write(ccu, trig->offset, 1 << trig->bit);
+
+ return __ccu_wait_bit(ccu, trig->offset, trig->bit, false);
+}
+
+/* Divider operations */
+
+/* Read a divider value and return the scaled divisor it represents. */
+static u64 divider_read_scaled(struct ccu_data *ccu, struct bcm_clk_div *div)
+{
+ unsigned long flags;
+ u32 reg_val;
+ u32 reg_div;
+
+ if (divider_is_fixed(div))
+ return (u64)div->fixed;
+
+ flags = ccu_lock(ccu);
+ reg_val = __ccu_read(ccu, div->offset);
+ ccu_unlock(ccu, flags);
+
+ /* Extract the full divider field from the register value */
+ reg_div = bitfield_extract(reg_val, div->shift, div->width);
+
+ /* Return the scaled divisor value it represents */
+ return scaled_div_value(div, reg_div);
+}
+
+/*
+ * Convert a divider's scaled divisor value into its recorded form
+ * and commit it into the hardware divider register.
+ *
+ * Returns 0 on success. Returns -EINVAL for invalid arguments.
+ * Returns -ENXIO if gating failed, and -EIO if a trigger failed.
+ */
+static int __div_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_div *div, struct bcm_clk_trig *trig)
+{
+ bool enabled;
+ u32 reg_div;
+ u32 reg_val;
+ int ret = 0;
+
+ BUG_ON(divider_is_fixed(div));
+
+ /*
+ * If we're just initializing the divider, and no initial
+ * state was defined in the device tree, we just find out
+ * what its current value is rather than updating it.
+ */
+ if (div->scaled_div == BAD_SCALED_DIV_VALUE) {
+ reg_val = __ccu_read(ccu, div->offset);
+ reg_div = bitfield_extract(reg_val, div->shift, div->width);
+ div->scaled_div = scaled_div_value(div, reg_div);
+
+ return 0;
+ }
+
+ /* Convert the scaled divisor to the value we need to record */
+ reg_div = divider(div, div->scaled_div);
+
+ /* Clock needs to be enabled before changing the rate */
+ enabled = __is_clk_gate_enabled(ccu, gate);
+ if (!enabled && !__clk_gate(ccu, gate, true)) {
+ ret = -ENXIO;
+ goto out;
+ }
+
+ /* Replace the divider value and record the result */
+ reg_val = __ccu_read(ccu, div->offset);
+ reg_val = bitfield_replace(reg_val, div->shift, div->width, reg_div);
+ __ccu_write(ccu, div->offset, reg_val);
+
+ /* If the trigger fails we still want to disable the gate */
+ if (!__clk_trigger(ccu, trig))
+ ret = -EIO;
+
+ /* Disable the clock again if it was disabled to begin with */
+ if (!enabled && !__clk_gate(ccu, gate, false))
+ ret = ret ? ret : -ENXIO; /* return first error */
+out:
+ return ret;
+}
+
+/*
+ * Initialize a divider by committing our desired state to hardware
+ * without the usual checks to see if it's already set up that way.
+ * Returns true if successful, false otherwise.
+ */
+static bool div_init(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_div *div, struct bcm_clk_trig *trig)
+{
+ if (!divider_exists(div) || divider_is_fixed(div))
+ return true;
+ return !__div_commit(ccu, gate, div, trig);
+}
+
+static int divider_write(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_div *div, struct bcm_clk_trig *trig,
+ u64 scaled_div)
+{
+ unsigned long flags;
+ u64 previous;
+ int ret;
+
+ BUG_ON(divider_is_fixed(div));
+
+ previous = div->scaled_div;
+ if (previous == scaled_div)
+ return 0; /* No change */
+
+ div->scaled_div = scaled_div;
+
+ flags = ccu_lock(ccu);
+ __ccu_write_enable(ccu);
+
+ ret = __div_commit(ccu, gate, div, trig);
+
+ __ccu_write_disable(ccu);
+ ccu_unlock(ccu, flags);
+
+ if (ret)
+ div->scaled_div = previous; /* Revert the change */
+
+ return ret;
+
+}
+
+/* Common clock rate helpers */
+
+/*
+ * Implement the common clock framework recalc_rate method, taking
+ * into account a divider and an optional pre-divider. The
+ * pre-divider register pointer may be NULL.
+ */
+static unsigned long clk_recalc_rate(struct ccu_data *ccu,
+ struct bcm_clk_div *div, struct bcm_clk_div *pre_div,
+ unsigned long parent_rate)
+{
+ u64 scaled_parent_rate;
+ u64 scaled_div;
+ u64 result;
+
+ if (!divider_exists(div))
+ return parent_rate;
+
+ if (parent_rate > (unsigned long)LONG_MAX)
+ return 0; /* actually this would be a caller bug */
+
+ /*
+ * If there is a pre-divider, divide the scaled parent rate
+ * by the pre-divider value first. In this case--to improve
+ * accuracy--scale the parent rate by *both* the pre-divider
+ * value and the divider before actually computing the
+ * result of the pre-divider.
+ *
+ * If there's only one divider, just scale the parent rate.
+ */
+ if (pre_div && divider_exists(pre_div)) {
+ u64 scaled_rate;
+
+ scaled_rate = scale_rate(pre_div, parent_rate);
+ scaled_rate = scale_rate(div, scaled_rate);
+ scaled_div = divider_read_scaled(ccu, pre_div);
+ scaled_parent_rate = do_div_round_closest(scaled_rate,
+ scaled_div);
+ } else {
+ scaled_parent_rate = scale_rate(div, parent_rate);
+ }
+
+ /*
+ * Get the scaled divisor value, and divide the scaled
+ * parent rate by that to determine this clock's resulting
+ * rate.
+ */
+ scaled_div = divider_read_scaled(ccu, div);
+ result = do_div_round_closest(scaled_parent_rate, scaled_div);
+
+ return (unsigned long)result;
+}
+
+/*
+ * Compute the output rate produced when a given parent rate is fed
+ * into two dividers. The pre-divider can be NULL, and even if it's
+ * non-null it may be nonexistent. It's also OK for the divider to
+ * be nonexistent, and in that case the pre-divider is also ignored.
+ *
+ * If scaled_div is non-null, it is used to return the scaled divisor
+ * value used by the (downstream) divider to produce that rate.
+ */
+static long round_rate(struct ccu_data *ccu, struct bcm_clk_div *div,
+ struct bcm_clk_div *pre_div,
+ unsigned long rate, unsigned long parent_rate,
+ u64 *scaled_div)
+{
+ u64 scaled_parent_rate;
+ u64 min_scaled_div;
+ u64 max_scaled_div;
+ u64 best_scaled_div;
+ u64 result;
+
+ BUG_ON(!divider_exists(div));
+ BUG_ON(!rate);
+ BUG_ON(parent_rate > (u64)LONG_MAX);
+
+ /*
+ * If there is a pre-divider, divide the scaled parent rate
+ * by the pre-divider value first. In this case--to improve
+ * accuracy--scale the parent rate by *both* the pre-divider
+ * value and the divider before actually computing the
+ * result of the pre-divider.
+ *
+ * If there's only one divider, just scale the parent rate.
+ *
+ * For simplicity we treat the pre-divider as fixed (for now).
+ */
+ if (divider_exists(pre_div)) {
+ u64 scaled_rate;
+ u64 scaled_pre_div;
+
+ scaled_rate = scale_rate(pre_div, parent_rate);
+ scaled_rate = scale_rate(div, scaled_rate);
+ scaled_pre_div = divider_read_scaled(ccu, pre_div);
+ scaled_parent_rate = do_div_round_closest(scaled_rate,
+ scaled_pre_div);
+ } else {
+ scaled_parent_rate = scale_rate(div, parent_rate);
+ }
+
+ /*
+ * Compute the best possible divider and ensure it is in
+ * range. A fixed divider can't be changed, so just report
+ * the best we can do.
+ */
+ if (!divider_is_fixed(div)) {
+ best_scaled_div = do_div_round_closest(scaled_parent_rate,
+ rate);
+ min_scaled_div = scaled_div_min(div);
+ max_scaled_div = scaled_div_max(div);
+ if (best_scaled_div > max_scaled_div)
+ best_scaled_div = max_scaled_div;
+ else if (best_scaled_div < min_scaled_div)
+ best_scaled_div = min_scaled_div;
+ } else {
+ best_scaled_div = divider_read_scaled(ccu, div);
+ }
+
+ /* OK, figure out the resulting rate */
+ result = do_div_round_closest(scaled_parent_rate, best_scaled_div);
+
+ if (scaled_div)
+ *scaled_div = best_scaled_div;
+
+ return (long)result;
+}
+
+/* Common clock parent helpers */
+
+/*
+ * For a given parent selector (register field) value, find the
+ * index into a selector's parent_sel array that contains it.
+ * Returns the index, or BAD_CLK_INDEX if it's not found.
+ */
+static u8 parent_index(struct bcm_clk_sel *sel, u8 parent_sel)
+{
+ u8 i;
+
+ BUG_ON(sel->parent_count > (u32)U8_MAX);
+ for (i = 0; i < sel->parent_count; i++)
+ if (sel->parent_sel[i] == parent_sel)
+ return i;
+ return BAD_CLK_INDEX;
+}
+
+/*
+ * Fetch the current value of the selector, and translate that into
+ * its corresponding index in the parent array we registered with
+ * the clock framework.
+ *
+ * Returns parent array index that corresponds with the value found,
+ * or BAD_CLK_INDEX if the found value is out of range.
+ */
+static u8 selector_read_index(struct ccu_data *ccu, struct bcm_clk_sel *sel)
+{
+ unsigned long flags;
+ u32 reg_val;
+ u32 parent_sel;
+ u8 index;
+
+ /* If there's no selector, there's only one parent */
+ if (!selector_exists(sel))
+ return 0;
+
+ /* Get the value in the selector register */
+ flags = ccu_lock(ccu);
+ reg_val = __ccu_read(ccu, sel->offset);
+ ccu_unlock(ccu, flags);
+
+ parent_sel = bitfield_extract(reg_val, sel->shift, sel->width);
+
+ /* Look up that selector's parent array index and return it */
+ index = parent_index(sel, parent_sel);
+ if (index == BAD_CLK_INDEX)
+ pr_err("%s: out-of-range parent selector %u (%s 0x%04x)\n",
+ __func__, parent_sel, ccu->name, sel->offset);
+
+ return index;
+}
+
+/*
+ * Commit our desired selector value to the hardware.
+ *
+ * Returns 0 on success. Returns -EINVAL for invalid arguments.
+ * Returns -ENXIO if gating failed, and -EIO if a trigger failed.
+ */
+static int
+__sel_commit(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_sel *sel, struct bcm_clk_trig *trig)
+{
+ u32 parent_sel;
+ u32 reg_val;
+ bool enabled;
+ int ret = 0;
+
+ BUG_ON(!selector_exists(sel));
+
+ /*
+ * If we're just initializing the selector, and no initial
+ * state was defined in the device tree, we just find out
+ * what its current value is rather than updating it.
+ */
+ if (sel->clk_index == BAD_CLK_INDEX) {
+ u8 index;
+
+ reg_val = __ccu_read(ccu, sel->offset);
+ parent_sel = bitfield_extract(reg_val, sel->shift, sel->width);
+ index = parent_index(sel, parent_sel);
+ if (index == BAD_CLK_INDEX)
+ return -EINVAL;
+ sel->clk_index = index;
+
+ return 0;
+ }
+
+ BUG_ON((u32)sel->clk_index >= sel->parent_count);
+ parent_sel = sel->parent_sel[sel->clk_index];
+
+ /* Clock needs to be enabled before changing the parent */
+ enabled = __is_clk_gate_enabled(ccu, gate);
+ if (!enabled && !__clk_gate(ccu, gate, true))
+ return -ENXIO;
+
+ /* Replace the selector value and record the result */
+ reg_val = __ccu_read(ccu, sel->offset);
+ reg_val = bitfield_replace(reg_val, sel->shift, sel->width, parent_sel);
+ __ccu_write(ccu, sel->offset, reg_val);
+
+ /* If the trigger fails we still want to disable the gate */
+ if (!__clk_trigger(ccu, trig))
+ ret = -EIO;
+
+ /* Disable the clock again if it was disabled to begin with */
+ if (!enabled && !__clk_gate(ccu, gate, false))
+ ret = ret ? ret : -ENXIO; /* return first error */
+
+ return ret;
+}
+
+/*
+ * Initialize a selector by committing our desired state to hardware
+ * without the usual checks to see if it's already set up that way.
+ * Returns true if successful, false otherwise.
+ */
+static bool sel_init(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_sel *sel, struct bcm_clk_trig *trig)
+{
+ if (!selector_exists(sel))
+ return true;
+ return !__sel_commit(ccu, gate, sel, trig);
+}
+
+/*
+ * Write a new value into a selector register to switch to a
+ * different parent clock. Returns 0 on success, or an error code
+ * (from __sel_commit()) otherwise.
+ */
+static int selector_write(struct ccu_data *ccu, struct bcm_clk_gate *gate,
+ struct bcm_clk_sel *sel, struct bcm_clk_trig *trig,
+ u8 index)
+{
+ unsigned long flags;
+ u8 previous;
+ int ret;
+
+ previous = sel->clk_index;
+ if (previous == index)
+ return 0; /* No change */
+
+ sel->clk_index = index;
+
+ flags = ccu_lock(ccu);
+ __ccu_write_enable(ccu);
+
+ ret = __sel_commit(ccu, gate, sel, trig);
+
+ __ccu_write_disable(ccu);
+ ccu_unlock(ccu, flags);
+
+ if (ret)
+ sel->clk_index = previous; /* Revert the change */
+
+ return ret;
+}
+
+/* Clock operations */
+
+static int kona_peri_clk_enable(struct clk_hw *hw)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct bcm_clk_gate *gate = &bcm_clk->peri->gate;
+
+ return clk_gate(bcm_clk->ccu, bcm_clk->name, gate, true);
+}
+
+static void kona_peri_clk_disable(struct clk_hw *hw)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct bcm_clk_gate *gate = &bcm_clk->peri->gate;
+
+ (void)clk_gate(bcm_clk->ccu, bcm_clk->name, gate, false);
+}
+
+static int kona_peri_clk_is_enabled(struct clk_hw *hw)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct bcm_clk_gate *gate = &bcm_clk->peri->gate;
+
+ return is_clk_gate_enabled(bcm_clk->ccu, gate) ? 1 : 0;
+}
+
+static unsigned long kona_peri_clk_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct peri_clk_data *data = bcm_clk->peri;
+
+ return clk_recalc_rate(bcm_clk->ccu, &data->div, &data->pre_div,
+ parent_rate);
+}
+
+static long kona_peri_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct bcm_clk_div *div = &bcm_clk->peri->div;
+
+ if (!divider_exists(div))
+ return __clk_get_rate(hw->clk);
+
+ /* Quietly avoid a zero rate */
+ return round_rate(bcm_clk->ccu, div, &bcm_clk->peri->pre_div,
+ rate ? rate : 1, *parent_rate, NULL);
+}
+
+static int kona_peri_clk_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct peri_clk_data *data = bcm_clk->peri;
+ struct bcm_clk_sel *sel = &data->sel;
+ struct bcm_clk_trig *trig;
+ int ret;
+
+ BUG_ON(index >= sel->parent_count);
+
+ /* If there's only one parent we don't require a selector */
+ if (!selector_exists(sel))
+ return 0;
+
+ /*
+ * The regular trigger is used by default, but if there's a
+ * pre-trigger we want to use that instead.
+ */
+ trig = trigger_exists(&data->pre_trig) ? &data->pre_trig
+ : &data->trig;
+
+ ret = selector_write(bcm_clk->ccu, &data->gate, sel, trig, index);
+ if (ret == -ENXIO) {
+ pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name);
+ ret = -EIO; /* Don't proliferate weird errors */
+ } else if (ret == -EIO) {
+ pr_err("%s: %strigger failed for %s\n", __func__,
+ trig == &data->pre_trig ? "pre-" : "",
+ bcm_clk->name);
+ }
+
+ return ret;
+}
+
+static u8 kona_peri_clk_get_parent(struct clk_hw *hw)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct peri_clk_data *data = bcm_clk->peri;
+ u8 index;
+
+ index = selector_read_index(bcm_clk->ccu, &data->sel);
+
+ /* Not all callers would handle an out-of-range value gracefully */
+ return index == BAD_CLK_INDEX ? 0 : index;
+}
+
+static int kona_peri_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct kona_clk *bcm_clk = to_kona_clk(hw);
+ struct peri_clk_data *data = bcm_clk->peri;
+ struct bcm_clk_div *div = &data->div;
+ u64 scaled_div = 0;
+ int ret;
+
+ if (parent_rate > (unsigned long)LONG_MAX)
+ return -EINVAL;
+
+ if (rate == __clk_get_rate(hw->clk))
+ return 0;
+
+ if (!divider_exists(div))
+ return rate == parent_rate ? 0 : -EINVAL;
+
+ /*
+ * A fixed divider can't be changed. (Nor can a fixed
+ * pre-divider be, but for now we never actually try to
+ * change that.) Tolerate a request for a no-op change.
+ */
+ if (divider_is_fixed(&data->div))
+ return rate == parent_rate ? 0 : -EINVAL;
+
+ /*
+ * Get the scaled divisor value needed to achieve a clock
+ * rate as close as possible to what was requested, given
+ * the parent clock rate supplied.
+ */
+ (void)round_rate(bcm_clk->ccu, div, &data->pre_div,
+ rate ? rate : 1, parent_rate, &scaled_div);
+
+ /*
+ * We aren't updating any pre-divider at this point, so
+ * we'll use the regular trigger.
+ */
+ ret = divider_write(bcm_clk->ccu, &data->gate, &data->div,
+ &data->trig, scaled_div);
+ if (ret == -ENXIO) {
+ pr_err("%s: gating failure for %s\n", __func__, bcm_clk->name);
+ ret = -EIO; /* Don't proliferate weird errors */
+ } else if (ret == -EIO) {
+ pr_err("%s: trigger failed for %s\n", __func__, bcm_clk->name);
+ }
+
+ return ret;
+}
+
+struct clk_ops kona_peri_clk_ops = {
+ .enable = kona_peri_clk_enable,
+ .disable = kona_peri_clk_disable,
+ .is_enabled = kona_peri_clk_is_enabled,
+ .recalc_rate = kona_peri_clk_recalc_rate,
+ .round_rate = kona_peri_clk_round_rate,
+ .set_parent = kona_peri_clk_set_parent,
+ .get_parent = kona_peri_clk_get_parent,
+ .set_rate = kona_peri_clk_set_rate,
+};
+
+/* Put a peripheral clock into its initial state */
+static bool __peri_clk_init(struct kona_clk *bcm_clk)
+{
+ struct ccu_data *ccu = bcm_clk->ccu;
+ struct peri_clk_data *peri = bcm_clk->peri;
+ const char *name = bcm_clk->name;
+ struct bcm_clk_trig *trig;
+
+ BUG_ON(bcm_clk->type != bcm_clk_peri);
+
+ if (!gate_init(ccu, &peri->gate)) {
+ pr_err("%s: error initializing gate for %s\n", __func__, name);
+ return false;
+ }
+ if (!div_init(ccu, &peri->gate, &peri->div, &peri->trig)) {
+ pr_err("%s: error initializing divider for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ /*
+ * For the pre-divider and selector, the pre-trigger is used
+ * if it's present, otherwise we just use the regular trigger.
+ */
+ trig = trigger_exists(&peri->pre_trig) ? &peri->pre_trig
+ : &peri->trig;
+
+ if (!div_init(ccu, &peri->gate, &peri->pre_div, trig)) {
+ pr_err("%s: error initializing pre-divider for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ if (!sel_init(ccu, &peri->gate, &peri->sel, trig)) {
+ pr_err("%s: error initializing selector for %s\n", __func__,
+ name);
+ return false;
+ }
+
+ return true;
+}
+
+static bool __kona_clk_init(struct kona_clk *bcm_clk)
+{
+ switch (bcm_clk->type) {
+ case bcm_clk_peri:
+ return __peri_clk_init(bcm_clk);
+ default:
+ BUG();
+ }
+ return -EINVAL;
+}
+
+/* Set a CCU and all its clocks into their desired initial state */
+bool __init kona_ccu_init(struct ccu_data *ccu)
+{
+ unsigned long flags;
+ unsigned int which;
+ struct clk **clks = ccu->data.clks;
+ bool success = true;
+
+ flags = ccu_lock(ccu);
+ __ccu_write_enable(ccu);
+
+ for (which = 0; which < ccu->data.clk_num; which++) {
+ struct kona_clk *bcm_clk;
+
+ if (!clks[which])
+ continue;
+ bcm_clk = to_kona_clk(__clk_get_hw(clks[which]));
+ success &= __kona_clk_init(bcm_clk);
+ }
+
+ __ccu_write_disable(ccu);
+ ccu_unlock(ccu, flags);
+ return success;
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CLK_KONA_H
+#define _CLK_KONA_H
+
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/clk-provider.h>
+
+#define BILLION 1000000000
+
+/* The common clock framework uses u8 to represent a parent index */
+#define PARENT_COUNT_MAX ((u32)U8_MAX)
+
+#define BAD_CLK_INDEX U8_MAX /* Can't ever be valid */
+#define BAD_CLK_NAME ((const char *)-1)
+
+#define BAD_SCALED_DIV_VALUE U64_MAX
+
+/*
+ * Utility macros for object flag management. If possible, flags
+ * should be defined such that 0 is the desired default value.
+ */
+#define FLAG(type, flag) BCM_CLK_ ## type ## _FLAGS_ ## flag
+#define FLAG_SET(obj, type, flag) ((obj)->flags |= FLAG(type, flag))
+#define FLAG_CLEAR(obj, type, flag) ((obj)->flags &= ~(FLAG(type, flag)))
+#define FLAG_FLIP(obj, type, flag) ((obj)->flags ^= FLAG(type, flag))
+#define FLAG_TEST(obj, type, flag) (!!((obj)->flags & FLAG(type, flag)))
+
+/* Clock field state tests */
+
+#define gate_exists(gate) FLAG_TEST(gate, GATE, EXISTS)
+#define gate_is_enabled(gate) FLAG_TEST(gate, GATE, ENABLED)
+#define gate_is_hw_controllable(gate) FLAG_TEST(gate, GATE, HW)
+#define gate_is_sw_controllable(gate) FLAG_TEST(gate, GATE, SW)
+#define gate_is_sw_managed(gate) FLAG_TEST(gate, GATE, SW_MANAGED)
+#define gate_is_no_disable(gate) FLAG_TEST(gate, GATE, NO_DISABLE)
+
+#define gate_flip_enabled(gate) FLAG_FLIP(gate, GATE, ENABLED)
+
+#define divider_exists(div) FLAG_TEST(div, DIV, EXISTS)
+#define divider_is_fixed(div) FLAG_TEST(div, DIV, FIXED)
+#define divider_has_fraction(div) (!divider_is_fixed(div) && \
+ (div)->frac_width > 0)
+
+#define selector_exists(sel) ((sel)->width != 0)
+#define trigger_exists(trig) FLAG_TEST(trig, TRIG, EXISTS)
+
+/* Clock type, used to tell common block what it's part of */
+enum bcm_clk_type {
+ bcm_clk_none, /* undefined clock type */
+ bcm_clk_bus,
+ bcm_clk_core,
+ bcm_clk_peri
+};
+
+/*
+ * Each CCU defines a mapped area of memory containing registers
+ * used to manage clocks implemented by the CCU. Access to memory
+ * within the CCU's space is serialized by a spinlock. Before any
+ * (other) address can be written, a special access "password" value
+ * must be written to its WR_ACCESS register (located at the base
+ * address of the range). We keep track of the name of each CCU as
+ * it is set up, and maintain them in a list.
+ */
+struct ccu_data {
+ void __iomem *base; /* base of mapped address space */
+ spinlock_t lock; /* serialization lock */
+ bool write_enabled; /* write access is currently enabled */
+ struct list_head links; /* for ccu_list */
+ struct device_node *node;
+ struct clk_onecell_data data;
+ const char *name;
+ u32 range; /* byte range of address space */
+};
+
+/*
+ * Gating control and status is managed by a 32-bit gate register.
+ *
+ * There are several types of gating available:
+ * - (no gate)
+ * A clock with no gate is assumed to be always enabled.
+ * - hardware-only gating (auto-gating)
+ * Enabling or disabling clocks with this type of gate is
+ * managed automatically by the hardware. Such clocks can be
+ * considered by the software to be enabled. The current status
+ * of auto-gated clocks can be read from the gate status bit.
+ * - software-only gating
+ * Auto-gating is not available for this type of clock.
+ * Instead, software manages whether it's enabled by setting or
+ * clearing the enable bit. The current gate status of a gate
+ * under software control can be read from the gate status bit.
+ * To ensure a change to the gating status is complete, the
+ * status bit can be polled to verify that the gate has entered
+ * the desired state.
+ * - selectable hardware or software gating
+ * Gating for this type of clock can be configured to be either
+ * under software or hardware control. Which type is in use is
+ * determined by the hw_sw_sel bit of the gate register.
+ */
+struct bcm_clk_gate {
+ u32 offset; /* gate register offset */
+ u32 status_bit; /* 0: gate is disabled; 0: gatge is enabled */
+ u32 en_bit; /* 0: disable; 1: enable */
+ u32 hw_sw_sel_bit; /* 0: hardware gating; 1: software gating */
+ u32 flags; /* BCM_CLK_GATE_FLAGS_* below */
+};
+
+/*
+ * Gate flags:
+ * HW means this gate can be auto-gated
+ * SW means the state of this gate can be software controlled
+ * NO_DISABLE means this gate is (only) enabled if under software control
+ * SW_MANAGED means the status of this gate is under software control
+ * ENABLED means this software-managed gate is *supposed* to be enabled
+ */
+#define BCM_CLK_GATE_FLAGS_EXISTS ((u32)1 << 0) /* Gate is valid */
+#define BCM_CLK_GATE_FLAGS_HW ((u32)1 << 1) /* Can auto-gate */
+#define BCM_CLK_GATE_FLAGS_SW ((u32)1 << 2) /* Software control */
+#define BCM_CLK_GATE_FLAGS_NO_DISABLE ((u32)1 << 3) /* HW or enabled */
+#define BCM_CLK_GATE_FLAGS_SW_MANAGED ((u32)1 << 4) /* SW now in control */
+#define BCM_CLK_GATE_FLAGS_ENABLED ((u32)1 << 5) /* If SW_MANAGED */
+
+/*
+ * Gate initialization macros.
+ *
+ * Any gate initially under software control will be enabled.
+ */
+
+/* A hardware/software gate initially under software control */
+#define HW_SW_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit) \
+ { \
+ .offset = (_offset), \
+ .status_bit = (_status_bit), \
+ .en_bit = (_en_bit), \
+ .hw_sw_sel_bit = (_hw_sw_sel_bit), \
+ .flags = FLAG(GATE, HW)|FLAG(GATE, SW)| \
+ FLAG(GATE, SW_MANAGED)|FLAG(GATE, ENABLED)| \
+ FLAG(GATE, EXISTS), \
+ }
+
+/* A hardware/software gate initially under hardware control */
+#define HW_SW_GATE_AUTO(_offset, _status_bit, _en_bit, _hw_sw_sel_bit) \
+ { \
+ .offset = (_offset), \
+ .status_bit = (_status_bit), \
+ .en_bit = (_en_bit), \
+ .hw_sw_sel_bit = (_hw_sw_sel_bit), \
+ .flags = FLAG(GATE, HW)|FLAG(GATE, SW)| \
+ FLAG(GATE, EXISTS), \
+ }
+
+/* A hardware-or-enabled gate (enabled if not under hardware control) */
+#define HW_ENABLE_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit) \
+ { \
+ .offset = (_offset), \
+ .status_bit = (_status_bit), \
+ .en_bit = (_en_bit), \
+ .hw_sw_sel_bit = (_hw_sw_sel_bit), \
+ .flags = FLAG(GATE, HW)|FLAG(GATE, SW)| \
+ FLAG(GATE, NO_DISABLE)|FLAG(GATE, EXISTS), \
+ }
+
+/* A software-only gate */
+#define SW_ONLY_GATE(_offset, _status_bit, _en_bit) \
+ { \
+ .offset = (_offset), \
+ .status_bit = (_status_bit), \
+ .en_bit = (_en_bit), \
+ .flags = FLAG(GATE, SW)|FLAG(GATE, SW_MANAGED)| \
+ FLAG(GATE, ENABLED)|FLAG(GATE, EXISTS), \
+ }
+
+/* A hardware-only gate */
+#define HW_ONLY_GATE(_offset, _status_bit) \
+ { \
+ .offset = (_offset), \
+ .status_bit = (_status_bit), \
+ .flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS), \
+ }
+
+/*
+ * Each clock can have zero, one, or two dividers which change the
+ * output rate of the clock. Each divider can be either fixed or
+ * variable. If there are two dividers, they are the "pre-divider"
+ * and the "regular" or "downstream" divider. If there is only one,
+ * there is no pre-divider.
+ *
+ * A fixed divider is any non-zero (positive) value, and it
+ * indicates how the input rate is affected by the divider.
+ *
+ * The value of a variable divider is maintained in a sub-field of a
+ * 32-bit divider register. The position of the field in the
+ * register is defined by its offset and width. The value recorded
+ * in this field is always 1 less than the value it represents.
+ *
+ * In addition, a variable divider can indicate that some subset
+ * of its bits represent a "fractional" part of the divider. Such
+ * bits comprise the low-order portion of the divider field, and can
+ * be viewed as representing the portion of the divider that lies to
+ * the right of the decimal point. Most variable dividers have zero
+ * fractional bits. Variable dividers with non-zero fraction width
+ * still record a value 1 less than the value they represent; the
+ * added 1 does *not* affect the low-order bit in this case, it
+ * affects the bits above the fractional part only. (Often in this
+ * code a divider field value is distinguished from the value it
+ * represents by referring to the latter as a "divisor".)
+ *
+ * In order to avoid dealing with fractions, divider arithmetic is
+ * performed using "scaled" values. A scaled value is one that's
+ * been left-shifted by the fractional width of a divider. Dividing
+ * a scaled value by a scaled divisor produces the desired quotient
+ * without loss of precision and without any other special handling
+ * for fractions.
+ *
+ * The recorded value of a variable divider can be modified. To
+ * modify either divider (or both), a clock must be enabled (i.e.,
+ * using its gate). In addition, a trigger register (described
+ * below) must be used to commit the change, and polled to verify
+ * the change is complete.
+ */
+struct bcm_clk_div {
+ union {
+ struct { /* variable divider */
+ u32 offset; /* divider register offset */
+ u32 shift; /* field shift */
+ u32 width; /* field width */
+ u32 frac_width; /* field fraction width */
+
+ u64 scaled_div; /* scaled divider value */
+ };
+ u32 fixed; /* non-zero fixed divider value */
+ };
+ u32 flags; /* BCM_CLK_DIV_FLAGS_* below */
+};
+
+/*
+ * Divider flags:
+ * EXISTS means this divider exists
+ * FIXED means it is a fixed-rate divider
+ */
+#define BCM_CLK_DIV_FLAGS_EXISTS ((u32)1 << 0) /* Divider is valid */
+#define BCM_CLK_DIV_FLAGS_FIXED ((u32)1 << 1) /* Fixed-value */
+
+/* Divider initialization macros */
+
+/* A fixed (non-zero) divider */
+#define FIXED_DIVIDER(_value) \
+ { \
+ .fixed = (_value), \
+ .flags = FLAG(DIV, EXISTS)|FLAG(DIV, FIXED), \
+ }
+
+/* A divider with an integral divisor */
+#define DIVIDER(_offset, _shift, _width) \
+ { \
+ .offset = (_offset), \
+ .shift = (_shift), \
+ .width = (_width), \
+ .scaled_div = BAD_SCALED_DIV_VALUE, \
+ .flags = FLAG(DIV, EXISTS), \
+ }
+
+/* A divider whose divisor has an integer and fractional part */
+#define FRAC_DIVIDER(_offset, _shift, _width, _frac_width) \
+ { \
+ .offset = (_offset), \
+ .shift = (_shift), \
+ .width = (_width), \
+ .frac_width = (_frac_width), \
+ .scaled_div = BAD_SCALED_DIV_VALUE, \
+ .flags = FLAG(DIV, EXISTS), \
+ }
+
+/*
+ * Clocks may have multiple "parent" clocks. If there is more than
+ * one, a selector must be specified to define which of the parent
+ * clocks is currently in use. The selected clock is indicated in a
+ * sub-field of a 32-bit selector register. The range of
+ * representable selector values typically exceeds the number of
+ * available parent clocks. Occasionally the reset value of a
+ * selector field is explicitly set to a (specific) value that does
+ * not correspond to a defined input clock.
+ *
+ * We register all known parent clocks with the common clock code
+ * using a packed array (i.e., no empty slots) of (parent) clock
+ * names, and refer to them later using indexes into that array.
+ * We maintain an array of selector values indexed by common clock
+ * index values in order to map between these common clock indexes
+ * and the selector values used by the hardware.
+ *
+ * Like dividers, a selector can be modified, but to do so a clock
+ * must be enabled, and a trigger must be used to commit the change.
+ */
+struct bcm_clk_sel {
+ u32 offset; /* selector register offset */
+ u32 shift; /* field shift */
+ u32 width; /* field width */
+
+ u32 parent_count; /* number of entries in parent_sel[] */
+ u32 *parent_sel; /* array of parent selector values */
+ u8 clk_index; /* current selected index in parent_sel[] */
+};
+
+/* Selector initialization macro */
+#define SELECTOR(_offset, _shift, _width) \
+ { \
+ .offset = (_offset), \
+ .shift = (_shift), \
+ .width = (_width), \
+ .clk_index = BAD_CLK_INDEX, \
+ }
+
+/*
+ * Making changes to a variable divider or a selector for a clock
+ * requires the use of a trigger. A trigger is defined by a single
+ * bit within a register. To signal a change, a 1 is written into
+ * that bit. To determine when the change has been completed, that
+ * trigger bit is polled; the read value will be 1 while the change
+ * is in progress, and 0 when it is complete.
+ *
+ * Occasionally a clock will have more than one trigger. In this
+ * case, the "pre-trigger" will be used when changing a clock's
+ * selector and/or its pre-divider.
+ */
+struct bcm_clk_trig {
+ u32 offset; /* trigger register offset */
+ u32 bit; /* trigger bit */
+ u32 flags; /* BCM_CLK_TRIG_FLAGS_* below */
+};
+
+/*
+ * Trigger flags:
+ * EXISTS means this trigger exists
+ */
+#define BCM_CLK_TRIG_FLAGS_EXISTS ((u32)1 << 0) /* Trigger is valid */
+
+/* Trigger initialization macro */
+#define TRIGGER(_offset, _bit) \
+ { \
+ .offset = (_offset), \
+ .bit = (_bit), \
+ .flags = FLAG(TRIG, EXISTS), \
+ }
+
+struct peri_clk_data {
+ struct bcm_clk_gate gate;
+ struct bcm_clk_trig pre_trig;
+ struct bcm_clk_div pre_div;
+ struct bcm_clk_trig trig;
+ struct bcm_clk_div div;
+ struct bcm_clk_sel sel;
+ const char *clocks[]; /* must be last; use CLOCKS() to declare */
+};
+#define CLOCKS(...) { __VA_ARGS__, NULL, }
+#define NO_CLOCKS { NULL, } /* Must use of no parent clocks */
+
+struct kona_clk {
+ struct clk_hw hw;
+ struct clk_init_data init_data;
+ const char *name; /* name of this clock */
+ struct ccu_data *ccu; /* ccu this clock is associated with */
+ enum bcm_clk_type type;
+ union {
+ void *data;
+ struct peri_clk_data *peri;
+ };
+};
+#define to_kona_clk(_hw) \
+ container_of(_hw, struct kona_clk, hw)
+
+/* Exported globals */
+
+extern struct clk_ops kona_peri_clk_ops;
+
+/* Help functions */
+
+#define PERI_CLK_SETUP(clks, ccu, id, name) \
+ clks[id] = kona_clk_setup(ccu, #name, bcm_clk_peri, &name ## _data)
+
+/* Externally visible functions */
+
+extern u64 do_div_round_closest(u64 dividend, unsigned long divisor);
+extern u64 scaled_div_max(struct bcm_clk_div *div);
+extern u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value,
+ u32 billionths);
+
+extern struct clk *kona_clk_setup(struct ccu_data *ccu, const char *name,
+ enum bcm_clk_type type, void *data);
+extern void __init kona_dt_ccu_setup(struct device_node *node,
+ int (*ccu_clks_setup)(struct ccu_data *));
+extern bool __init kona_ccu_init(struct ccu_data *ccu);
+
+#endif /* _CLK_KONA_H */
struct clk_hw hw;
void __iomem *vcoreg;
void __iomem *lockreg;
- const struct icst_params *params;
+ struct icst_params *params;
unsigned long rate;
};
struct clk_icst *icst = to_icst(hw);
struct icst_vco vco;
+ if (parent_rate)
+ icst->params->ref = parent_rate;
vco = vco_get(icst->vcoreg);
icst->rate = icst_hz(icst->params, vco);
return icst->rate;
struct clk_icst *icst = to_icst(hw);
struct icst_vco vco;
+ if (parent_rate)
+ icst->params->ref = parent_rate;
vco = icst_hz_to_vco(icst->params, rate);
icst->rate = icst_hz(icst->params, vco);
vco_set(icst->lockreg, icst->vcoreg, vco);
struct clk *icst_clk_register(struct device *dev,
const struct clk_icst_desc *desc,
const char *name,
+ const char *parent_name,
void __iomem *base)
{
struct clk *clk;
struct clk_icst *icst;
struct clk_init_data init;
+ struct icst_params *pclone;
icst = kzalloc(sizeof(struct clk_icst), GFP_KERNEL);
if (!icst) {
pr_err("could not allocate ICST clock!\n");
return ERR_PTR(-ENOMEM);
}
+
+ pclone = kmemdup(desc->params, sizeof(*pclone), GFP_KERNEL);
+ if (!pclone) {
+ pr_err("could not clone ICST params\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
init.name = name;
init.ops = &icst_ops;
init.flags = CLK_IS_ROOT;
- init.parent_names = NULL;
- init.num_parents = 0;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
icst->hw.init = &init;
- icst->params = desc->params;
+ icst->params = pclone;
icst->vcoreg = base + desc->vco_offset;
icst->lockreg = base + desc->lock_offset;
struct clk *icst_clk_register(struct device *dev,
const struct clk_icst_desc *desc,
const char *name,
+ const char *parent_name,
void __iomem *base);
imc = &impd1_clks[id];
imc->vco1name = kasprintf(GFP_KERNEL, "lm%x-vco1", id);
- clk = icst_clk_register(NULL, &impd1_icst1_desc, imc->vco1name, base);
+ clk = icst_clk_register(NULL, &impd1_icst1_desc, imc->vco1name, NULL,
+ base);
imc->vco1clk = clk;
imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
/* VCO2 is also called "CLK2" */
imc->vco2name = kasprintf(GFP_KERNEL, "lm%x-vco2", id);
- clk = icst_clk_register(NULL, &impd1_icst2_desc, imc->vco2name, base);
+ clk = icst_clk_register(NULL, &impd1_icst2_desc, imc->vco2name, NULL,
+ base);
imc->vco2clk = clk;
/* MMCI uses CLK2 right off */
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/err.h>
-#include <linux/platform_data/clk-integrator.h>
-
-#include <mach/hardware.h>
-#include <mach/platform.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
#include "clk-icst.h"
-/*
- * Implementation of the ARM Integrator/AP and Integrator/CP clock tree.
- * Inspired by portions of:
- * plat-versatile/clock.c and plat-versatile/include/plat/clock.h
- */
+#define INTEGRATOR_HDR_LOCK_OFFSET 0x14
-static const struct icst_params cp_auxvco_params = {
- .ref = 24000000,
+/* Base offset for the core module */
+static void __iomem *cm_base;
+
+static const struct icst_params cp_auxosc_params = {
.vco_max = ICST525_VCO_MAX_5V,
.vco_min = ICST525_VCO_MIN,
.vd_min = 8,
.idx2s = icst525_idx2s,
};
-static const struct clk_icst_desc __initdata cp_icst_desc = {
- .params = &cp_auxvco_params,
+static const struct clk_icst_desc __initdata cm_auxosc_desc = {
+ .params = &cp_auxosc_params,
.vco_offset = 0x1c,
.lock_offset = INTEGRATOR_HDR_LOCK_OFFSET,
};
-/*
- * integrator_clk_init() - set up the integrator clock tree
- * @is_cp: pass true if it's the Integrator/CP else AP is assumed
- */
-void __init integrator_clk_init(bool is_cp)
+static void __init of_integrator_cm_osc_setup(struct device_node *np)
{
- struct clk *clk;
-
- /* APB clock dummy */
- clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0);
- clk_register_clkdev(clk, "apb_pclk", NULL);
-
- /* UART reference clock */
- clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
- 14745600);
- clk_register_clkdev(clk, NULL, "uart0");
- clk_register_clkdev(clk, NULL, "uart1");
- if (is_cp)
- clk_register_clkdev(clk, NULL, "mmci");
-
- /* 24 MHz clock */
- clk = clk_register_fixed_rate(NULL, "clk24mhz", NULL, CLK_IS_ROOT,
- 24000000);
- clk_register_clkdev(clk, NULL, "kmi0");
- clk_register_clkdev(clk, NULL, "kmi1");
- if (!is_cp)
- clk_register_clkdev(clk, NULL, "ap_timer");
+ struct clk *clk = ERR_PTR(-EINVAL);
+ const char *clk_name = np->name;
+ const struct clk_icst_desc *desc = &cm_auxosc_desc;
+ const char *parent_name;
- if (!is_cp)
- return;
+ if (!cm_base) {
+ /* Remap the core module base if not done yet */
+ struct device_node *parent;
- /* 1 MHz clock */
- clk = clk_register_fixed_rate(NULL, "clk1mhz", NULL, CLK_IS_ROOT,
- 1000000);
- clk_register_clkdev(clk, NULL, "sp804");
+ parent = of_get_parent(np);
+ if (!np) {
+ pr_err("no parent on core module clock\n");
+ return;
+ }
+ cm_base = of_iomap(parent, 0);
+ if (!cm_base) {
+ pr_err("could not remap core module base\n");
+ return;
+ }
+ }
- /* ICST VCO clock used on the Integrator/CP CLCD */
- clk = icst_clk_register(NULL, &cp_icst_desc, "icst",
- __io_address(INTEGRATOR_HDR_BASE));
- clk_register_clkdev(clk, NULL, "clcd");
+ parent_name = of_clk_get_parent_name(np, 0);
+ clk = icst_clk_register(NULL, desc, clk_name, parent_name, cm_base);
+ if (!IS_ERR(clk))
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
}
+CLK_OF_DECLARE(integrator_cm_auxosc_clk,
+ "arm,integrator-cm-auxosc", of_integrator_cm_osc_setup);
/* ICST VCO clock */
if (is_pb1176)
clk = icst_clk_register(NULL, &realview_osc0_desc,
- "osc0", sysbase);
+ "osc0", NULL, sysbase);
else
clk = icst_clk_register(NULL, &realview_osc4_desc,
- "osc4", sysbase);
+ "osc4", NULL, sysbase);
clk_register_clkdev(clk, NULL, "dev:clcd");
clk_register_clkdev(clk, NULL, "issp:clcd");
bool
help
Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
+
+config CLKSRC_QCOM
+ bool
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
+obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
return;
}
-static void __init kona_timers_init(struct device_node *node)
-{
- u32 freq;
- struct clk *external_clk;
-
- external_clk = of_clk_get_by_name(node, NULL);
-
- if (!IS_ERR(external_clk)) {
- arch_timer_rate = clk_get_rate(external_clk);
- clk_prepare_enable(external_clk);
- } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
- arch_timer_rate = freq;
- } else {
- panic("unable to determine clock-frequency");
- }
-
- /* Setup IRQ numbers */
- timers.tmr_irq = irq_of_parse_and_map(node, 0);
-
- /* Setup IO addresses */
- timers.tmr_regs = of_iomap(node, 0);
-
- kona_timer_disable_and_clear(timers.tmr_regs);
-}
-
static int kona_timer_set_next_event(unsigned long clc,
struct clock_event_device *unused)
{
static void __init kona_timer_init(struct device_node *node)
{
- kona_timers_init(node);
+ u32 freq;
+ struct clk *external_clk;
+
+ if (!of_device_is_available(node)) {
+ pr_info("Kona Timer v1 marked as disabled in device tree\n");
+ return;
+ }
+
+ external_clk = of_clk_get_by_name(node, NULL);
+
+ if (!IS_ERR(external_clk)) {
+ arch_timer_rate = clk_get_rate(external_clk);
+ clk_prepare_enable(external_clk);
+ } else if (!of_property_read_u32(node, "clock-frequency", &freq)) {
+ arch_timer_rate = freq;
+ } else {
+ pr_err("Kona Timer v1 unable to determine clock-frequency");
+ return;
+ }
+
+ /* Setup IRQ numbers */
+ timers.tmr_irq = irq_of_parse_and_map(node, 0);
+
+ /* Setup IO addresses */
+ timers.tmr_regs = of_iomap(node, 0);
+
+ kona_timer_disable_and_clear(timers.tmr_regs);
+
kona_timer_clockevents_init();
setup_irq(timers.tmr_irq, &kona_timer_irq);
kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
--- /dev/null
+/*
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2009-2012,2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#define TIMER_MATCH_VAL 0x0000
+#define TIMER_COUNT_VAL 0x0004
+#define TIMER_ENABLE 0x0008
+#define TIMER_ENABLE_CLR_ON_MATCH_EN BIT(1)
+#define TIMER_ENABLE_EN BIT(0)
+#define TIMER_CLEAR 0x000C
+#define DGT_CLK_CTL 0x10
+#define DGT_CLK_CTL_DIV_4 0x3
+#define TIMER_STS_GPT0_CLR_PEND BIT(10)
+
+#define GPT_HZ 32768
+
+#define MSM_DGT_SHIFT 5
+
+static void __iomem *event_base;
+static void __iomem *sts_base;
+
+static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+ /* Stop the timer tick */
+ if (evt->mode == CLOCK_EVT_MODE_ONESHOT) {
+ u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+ ctrl &= ~TIMER_ENABLE_EN;
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+ }
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+}
+
+static int msm_timer_set_next_event(unsigned long cycles,
+ struct clock_event_device *evt)
+{
+ u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+
+ ctrl &= ~TIMER_ENABLE_EN;
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+ writel_relaxed(ctrl, event_base + TIMER_CLEAR);
+ writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
+
+ if (sts_base)
+ while (readl_relaxed(sts_base) & TIMER_STS_GPT0_CLR_PEND)
+ cpu_relax();
+
+ writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
+ return 0;
+}
+
+static void msm_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ u32 ctrl;
+
+ ctrl = readl_relaxed(event_base + TIMER_ENABLE);
+ ctrl &= ~(TIMER_ENABLE_EN | TIMER_ENABLE_CLR_ON_MATCH_EN);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_RESUME:
+ case CLOCK_EVT_MODE_PERIODIC:
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* Timer is enabled in set_next_event */
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ break;
+ }
+ writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+}
+
+static struct clock_event_device __percpu *msm_evt;
+
+static void __iomem *source_base;
+
+static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
+{
+ return readl_relaxed(source_base + TIMER_COUNT_VAL);
+}
+
+static struct clocksource msm_clocksource = {
+ .name = "dg_timer",
+ .rating = 300,
+ .read = msm_read_timer_count,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int msm_timer_irq;
+static int msm_timer_has_ppi;
+
+static int msm_local_timer_setup(struct clock_event_device *evt)
+{
+ int cpu = smp_processor_id();
+ int err;
+
+ evt->irq = msm_timer_irq;
+ evt->name = "msm_timer";
+ evt->features = CLOCK_EVT_FEAT_ONESHOT;
+ evt->rating = 200;
+ evt->set_mode = msm_timer_set_mode;
+ evt->set_next_event = msm_timer_set_next_event;
+ evt->cpumask = cpumask_of(cpu);
+
+ clockevents_config_and_register(evt, GPT_HZ, 4, 0xffffffff);
+
+ if (msm_timer_has_ppi) {
+ enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
+ } else {
+ err = request_irq(evt->irq, msm_timer_interrupt,
+ IRQF_TIMER | IRQF_NOBALANCING |
+ IRQF_TRIGGER_RISING, "gp_timer", evt);
+ if (err)
+ pr_err("request_irq failed\n");
+ }
+
+ return 0;
+}
+
+static void msm_local_timer_stop(struct clock_event_device *evt)
+{
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_percpu_irq(evt->irq);
+}
+
+static int msm_timer_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ /*
+ * Grab cpu pointer in each case to avoid spurious
+ * preemptible warnings
+ */
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_STARTING:
+ msm_local_timer_setup(this_cpu_ptr(msm_evt));
+ break;
+ case CPU_DYING:
+ msm_local_timer_stop(this_cpu_ptr(msm_evt));
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block msm_timer_cpu_nb = {
+ .notifier_call = msm_timer_cpu_notify,
+};
+
+static u64 notrace msm_sched_clock_read(void)
+{
+ return msm_clocksource.read(&msm_clocksource);
+}
+
+static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
+ bool percpu)
+{
+ struct clocksource *cs = &msm_clocksource;
+ int res = 0;
+
+ msm_timer_irq = irq;
+ msm_timer_has_ppi = percpu;
+
+ msm_evt = alloc_percpu(struct clock_event_device);
+ if (!msm_evt) {
+ pr_err("memory allocation failed for clockevents\n");
+ goto err;
+ }
+
+ if (percpu)
+ res = request_percpu_irq(irq, msm_timer_interrupt,
+ "gp_timer", msm_evt);
+
+ if (res) {
+ pr_err("request_percpu_irq failed\n");
+ } else {
+ res = register_cpu_notifier(&msm_timer_cpu_nb);
+ if (res) {
+ free_percpu_irq(irq, msm_evt);
+ goto err;
+ }
+
+ /* Immediately configure the timer on the boot CPU */
+ msm_local_timer_setup(__this_cpu_ptr(msm_evt));
+ }
+
+err:
+ writel_relaxed(TIMER_ENABLE_EN, source_base + TIMER_ENABLE);
+ res = clocksource_register_hz(cs, dgt_hz);
+ if (res)
+ pr_err("clocksource_register failed\n");
+ sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
+}
+
+#ifdef CONFIG_ARCH_QCOM
+static void __init msm_dt_timer_init(struct device_node *np)
+{
+ u32 freq;
+ int irq;
+ struct resource res;
+ u32 percpu_offset;
+ void __iomem *base;
+ void __iomem *cpu0_base;
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ pr_err("Failed to map event base\n");
+ return;
+ }
+
+ /* We use GPT0 for the clockevent */
+ irq = irq_of_parse_and_map(np, 1);
+ if (irq <= 0) {
+ pr_err("Can't get irq\n");
+ return;
+ }
+
+ /* We use CPU0's DGT for the clocksource */
+ if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
+ percpu_offset = 0;
+
+ if (of_address_to_resource(np, 0, &res)) {
+ pr_err("Failed to parse DGT resource\n");
+ return;
+ }
+
+ cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res));
+ if (!cpu0_base) {
+ pr_err("Failed to map source base\n");
+ return;
+ }
+
+ if (of_property_read_u32(np, "clock-frequency", &freq)) {
+ pr_err("Unknown frequency\n");
+ return;
+ }
+
+ event_base = base + 0x4;
+ sts_base = base + 0x88;
+ source_base = cpu0_base + 0x24;
+ freq /= 4;
+ writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL);
+
+ msm_timer_init(freq, 32, irq, !!percpu_offset);
+}
+CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
+CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
+#else
+
+static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
+ u32 sts)
+{
+ void __iomem *base;
+
+ base = ioremap(addr, SZ_256);
+ if (!base) {
+ pr_err("Failed to map timer base\n");
+ return -ENOMEM;
+ }
+ event_base = base + event;
+ source_base = base + source;
+ if (sts)
+ sts_base = base + sts;
+
+ return 0;
+}
+
+static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
+{
+ /*
+ * Shift timer count down by a constant due to unreliable lower bits
+ * on some targets.
+ */
+ return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
+}
+
+void __init msm7x01_timer_init(void)
+{
+ struct clocksource *cs = &msm_clocksource;
+
+ if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0))
+ return;
+ cs->read = msm_read_timer_count_shift;
+ cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
+ /* 600 KHz */
+ msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
+ false);
+}
+
+void __init msm7x30_timer_init(void)
+{
+ if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80))
+ return;
+ msm_timer_init(24576000 / 4, 32, 1, false);
+}
+
+void __init qsd8x50_timer_init(void)
+{
+ if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34))
+ return;
+ msm_timer_init(19200000 / 4, 32, 7, false);
+}
+#endif
If in doubt, say Y.
config ARM_KIRKWOOD_CPUFREQ
- def_bool ARCH_KIRKWOOD && OF
+ def_bool MACH_KIRKWOOD
help
This adds the CPUFreq driver for Marvell Kirkwood
SoCs.
return div_s64((int64_t)x << FRAC_BITS, (int64_t)y);
}
-static u64 energy_divisor;
-
struct sample {
int32_t core_pct_busy;
u64 aperf;
u64 mperf;
+ unsigned long long tsc;
int freq;
};
u64 prev_aperf;
u64 prev_mperf;
+ unsigned long long prev_tsc;
int sample_ptr;
struct sample samples[SAMPLE_COUNT];
};
struct sample *sample)
{
u64 core_pct;
- core_pct = div64_u64(int_tofp(sample->aperf * 100),
- sample->mperf);
- sample->freq = fp_toint(cpu->pstate.max_pstate * core_pct * 1000);
+ u64 c0_pct;
+
+ core_pct = div64_u64(sample->aperf * 100, sample->mperf);
- sample->core_pct_busy = core_pct;
+ c0_pct = div64_u64(sample->mperf * 100, sample->tsc);
+ sample->freq = fp_toint(
+ mul_fp(int_tofp(cpu->pstate.max_pstate),
+ int_tofp(core_pct * 1000)));
+
+ sample->core_pct_busy = mul_fp(int_tofp(core_pct),
+ div_fp(int_tofp(c0_pct + 1), int_tofp(100)));
}
static inline void intel_pstate_sample(struct cpudata *cpu)
{
u64 aperf, mperf;
+ unsigned long long tsc;
rdmsrl(MSR_IA32_APERF, aperf);
rdmsrl(MSR_IA32_MPERF, mperf);
+ tsc = native_read_tsc();
cpu->sample_ptr = (cpu->sample_ptr + 1) % SAMPLE_COUNT;
cpu->samples[cpu->sample_ptr].aperf = aperf;
cpu->samples[cpu->sample_ptr].mperf = mperf;
+ cpu->samples[cpu->sample_ptr].tsc = tsc;
cpu->samples[cpu->sample_ptr].aperf -= cpu->prev_aperf;
cpu->samples[cpu->sample_ptr].mperf -= cpu->prev_mperf;
+ cpu->samples[cpu->sample_ptr].tsc -= cpu->prev_tsc;
intel_pstate_calc_busy(cpu, &cpu->samples[cpu->sample_ptr]);
cpu->prev_aperf = aperf;
cpu->prev_mperf = mperf;
+ cpu->prev_tsc = tsc;
}
static inline void intel_pstate_set_sample_time(struct cpudata *cpu)
{
struct cpudata *cpu = (struct cpudata *) __data;
struct sample *sample;
- u64 energy;
intel_pstate_sample(cpu);
sample = &cpu->samples[cpu->sample_ptr];
- rdmsrl(MSR_PKG_ENERGY_STATUS, energy);
intel_pstate_adjust_busy_pstate(cpu);
cpu->pstate.current_pstate,
sample->mperf,
sample->aperf,
- div64_u64(energy, energy_divisor),
sample->freq);
intel_pstate_set_sample_time(cpu);
int cpu, rc = 0;
const struct x86_cpu_id *id;
struct cpu_defaults *cpu_info;
- u64 units;
if (no_load)
return -ENODEV;
if (rc)
goto out;
- rdmsrl(MSR_RAPL_POWER_UNIT, units);
- energy_divisor = 1 << ((units >> 8) & 0x1f); /* bits{12:8} */
-
intel_pstate_debug_expose_params();
intel_pstate_sysfs_expose_params();
config ARM_KIRKWOOD_CPUIDLE
bool "CPU Idle Driver for Marvell Kirkwood SoCs"
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
help
This adds the CPU Idle driver for Marvell Kirkwood SoCs.
return sl->entry_nr * sizeof(struct nx842_slentry);
}
+static inline unsigned long nx842_get_pa(void *addr)
+{
+ if (is_vmalloc_addr(addr))
+ return page_to_phys(vmalloc_to_page(addr))
+ + offset_in_page(addr);
+ else
+ return __pa(addr);
+}
+
static int nx842_build_scatterlist(unsigned long buf, int len,
struct nx842_scatterlist *sl)
{
entry = sl->entries;
while (len) {
- entry->ptr = __pa(buf);
+ entry->ptr = nx842_get_pa((void *)buf);
nextpage = ALIGN(buf + 1, NX842_HW_PAGE_SIZE);
if (nextpage < buf + len) {
/* we aren't at the end yet */
op.flags = NX842_OP_COMPRESS;
csbcpb = &workmem->csbcpb;
memset(csbcpb, 0, sizeof(*csbcpb));
- op.csbcpb = __pa(csbcpb);
- op.out = __pa(slout.entries);
+ op.csbcpb = nx842_get_pa(csbcpb);
+ op.out = nx842_get_pa(slout.entries);
for (i = 0; i < hdr->blocks_nr; i++) {
/*
*/
if (likely(max_sync_size == NX842_HW_PAGE_SIZE)) {
/* Create direct DDE */
- op.in = __pa(inbuf);
+ op.in = nx842_get_pa((void *)inbuf);
op.inlen = max_sync_size;
} else {
/* Create indirect DDE (scatterlist) */
nx842_build_scatterlist(inbuf, max_sync_size, &slin);
- op.in = __pa(slin.entries);
+ op.in = nx842_get_pa(slin.entries);
op.inlen = -nx842_get_scatterlist_size(&slin);
}
op.flags = NX842_OP_DECOMPRESS;
csbcpb = &workmem->csbcpb;
memset(csbcpb, 0, sizeof(*csbcpb));
- op.csbcpb = __pa(csbcpb);
+ op.csbcpb = nx842_get_pa(csbcpb);
/*
* max_sync_size may have changed since compression,
if (likely((inbuf & NX842_HW_PAGE_MASK) ==
((inbuf + hdr->sizes[i] - 1) & NX842_HW_PAGE_MASK))) {
/* Create direct DDE */
- op.in = __pa(inbuf);
+ op.in = nx842_get_pa((void *)inbuf);
op.inlen = hdr->sizes[i];
} else {
/* Create indirect DDE (scatterlist) */
nx842_build_scatterlist(inbuf, hdr->sizes[i] , &slin);
- op.in = __pa(slin.entries);
+ op.in = nx842_get_pa(slin.entries);
op.inlen = -nx842_get_scatterlist_size(&slin);
}
*/
if (likely(max_sync_size == NX842_HW_PAGE_SIZE)) {
/* Create direct DDE */
- op.out = __pa(outbuf);
+ op.out = nx842_get_pa((void *)outbuf);
op.outlen = max_sync_size;
} else {
/* Create indirect DDE (scatterlist) */
nx842_build_scatterlist(outbuf, max_sync_size, &slout);
- op.out = __pa(slout.entries);
+ op.out = nx842_get_pa(slout.entries);
op.outlen = -nx842_get_scatterlist_size(&slout);
}
tristate "MOXART DMA support"
depends on ARCH_MOXART
select DMA_ENGINE
+ select DMA_OF
select DMA_VIRTUAL_CHANNELS
help
Enable support for the MOXA ART SoC DMA controller.
if (!mv_can_chain(grp_start))
goto submit_done;
- dev_dbg(mv_chan_to_devp(mv_chan), "Append to last desc %x\n",
- old_chain_tail->async_tx.phys);
+ dev_dbg(mv_chan_to_devp(mv_chan), "Append to last desc %pa\n",
+ &old_chain_tail->async_tx.phys);
/* fix up the hardware chain */
mv_desc_set_next_desc(old_chain_tail, grp_start->async_tx.phys);
/* returns the number of allocated descriptors */
static int mv_xor_alloc_chan_resources(struct dma_chan *chan)
{
- char *hw_desc;
+ void *virt_desc;
+ dma_addr_t dma_desc;
int idx;
struct mv_xor_chan *mv_chan = to_mv_xor_chan(chan);
struct mv_xor_desc_slot *slot = NULL;
" %d descriptor slots", idx);
break;
}
- hw_desc = (char *) mv_chan->dma_desc_pool_virt;
- slot->hw_desc = (void *) &hw_desc[idx * MV_XOR_SLOT_SIZE];
+ virt_desc = mv_chan->dma_desc_pool_virt;
+ slot->hw_desc = virt_desc + idx * MV_XOR_SLOT_SIZE;
dma_async_tx_descriptor_init(&slot->async_tx, chan);
slot->async_tx.tx_submit = mv_xor_tx_submit;
INIT_LIST_HEAD(&slot->chain_node);
INIT_LIST_HEAD(&slot->slot_node);
INIT_LIST_HEAD(&slot->tx_list);
- hw_desc = (char *) mv_chan->dma_desc_pool;
- slot->async_tx.phys =
- (dma_addr_t) &hw_desc[idx * MV_XOR_SLOT_SIZE];
+ dma_desc = mv_chan->dma_desc_pool;
+ slot->async_tx.phys = dma_desc + idx * MV_XOR_SLOT_SIZE;
slot->idx = idx++;
spin_lock_bh(&mv_chan->lock);
int slot_cnt;
dev_dbg(mv_chan_to_devp(mv_chan),
- "%s dest: %x src %x len: %u flags: %ld\n",
- __func__, dest, src, len, flags);
+ "%s dest: %pad src %pad len: %u flags: %ld\n",
+ __func__, &dest, &src, len, flags);
if (unlikely(len < MV_XOR_MIN_BYTE_COUNT))
return NULL;
BUG_ON(len > MV_XOR_MAX_BYTE_COUNT);
dev_dbg(mv_chan_to_devp(mv_chan),
- "%s src_cnt: %d len: dest %x %u flags: %ld\n",
- __func__, src_cnt, len, dest, flags);
+ "%s src_cnt: %d len: %u dest %pad flags: %ld\n",
+ __func__, src_cnt, len, &dest, flags);
spin_lock_bh(&mv_chan->lock);
slot_cnt = mv_chan_xor_slot_count(len, src_cnt);
*
* called with the mem_ctls_mutex held
*/
-static void edac_mc_workq_setup(struct mem_ctl_info *mci, unsigned msec)
+static void edac_mc_workq_setup(struct mem_ctl_info *mci, unsigned msec,
+ bool init)
{
edac_dbg(0, "\n");
if (mci->op_state != OP_RUNNING_POLL)
return;
- INIT_DELAYED_WORK(&mci->work, edac_mc_workq_function);
+ if (init)
+ INIT_DELAYED_WORK(&mci->work, edac_mc_workq_function);
+
mod_delayed_work(edac_workqueue, &mci->work, msecs_to_jiffies(msec));
}
* user space has updated our poll period value, need to
* reset our workq delays
*/
-void edac_mc_reset_delay_period(int value)
+void edac_mc_reset_delay_period(unsigned long value)
{
struct mem_ctl_info *mci;
struct list_head *item;
list_for_each(item, &mc_devices) {
mci = list_entry(item, struct mem_ctl_info, link);
- edac_mc_workq_setup(mci, (unsigned long) value);
+ edac_mc_workq_setup(mci, value, false);
}
mutex_unlock(&mem_ctls_mutex);
/* This instance is NOW RUNNING */
mci->op_state = OP_RUNNING_POLL;
- edac_mc_workq_setup(mci, edac_mc_get_poll_msec());
+ edac_mc_workq_setup(mci, edac_mc_get_poll_msec(), true);
} else {
mci->op_state = OP_RUNNING_INTERRUPT;
}
static int edac_set_poll_msec(const char *val, struct kernel_param *kp)
{
- long l;
+ unsigned long l;
int ret;
if (!val)
return -EINVAL;
- ret = kstrtol(val, 0, &l);
+ ret = kstrtoul(val, 0, &l);
if (ret)
return ret;
- if ((int)l != l)
+
+ if (l < 1000)
return -EINVAL;
- *((int *)kp->arg) = l;
+
+ *((unsigned long *)kp->arg) = l;
/* notify edac_mc engine to reset the poll period */
edac_mc_reset_delay_period(l);
extern void edac_device_workq_teardown(struct edac_device_ctl_info *edac_dev);
extern void edac_device_reset_delay_period(struct edac_device_ctl_info
*edac_dev, unsigned long value);
-extern void edac_mc_reset_delay_period(int value);
+extern void edac_mc_reset_delay_period(unsigned long value);
extern void *edac_align_ptr(void **p, unsigned size, int n_elems);
config GPIO_MSM_V2
tristate "Qualcomm MSM GPIO v2"
- depends on GPIOLIB && OF && ARCH_MSM
+ depends on GPIOLIB && OF && ARCH_QCOM
help
Say yes here to support the GPIO interface on ARM v7 based
Qualcomm MSM chips. Most of the pins on the MSM can be
config GPIO_TB10X
bool
+ select GENERIC_IRQ_CHIP
select OF_GPIO
comment "I2C GPIO expanders:"
/*
- * Copyright (C) 2012-2013 Broadcom Corporation
+ * Copyright (C) 2012-2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
module_platform_driver(bcm_kona_gpio_driver);
-MODULE_AUTHOR("Broadcom");
+MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
MODULE_DESCRIPTION("Broadcom Kona GPIO Driver");
MODULE_LICENSE("GPL v2");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
MODULE_DESCRIPTION("CLPS711X GPIO driver");
+MODULE_ALIAS("platform:clps711x-gpio");
static int intel_gpio_runtime_idle(struct device *dev)
{
- pm_schedule_suspend(dev, 500);
- return -EBUSY;
+ int err = pm_schedule_suspend(dev, 500);
+ return err ?: -EBUSY;
}
static const struct dev_pm_ops intel_gpio_pm_ops = {
#error GPIO32 option is not enabled for your xtensa core variant
#endif
+#if XCHAL_HAVE_CP
+
static inline unsigned long enable_cp(unsigned long *cpenable)
{
unsigned long flags;
local_irq_restore(flags);
}
+#else
+
+static inline unsigned long enable_cp(unsigned long *cpenable)
+{
+ *cpenable = 0; /* avoid uninitialized value warning */
+ return 0;
+}
+
+static inline void disable_cp(unsigned long flags, unsigned long cpenable)
+{
+}
+
+#endif /* XCHAL_HAVE_CP */
+
static int xtensa_impwire_get_direction(struct gpio_chip *gc, unsigned offset)
{
return 1; /* input only */
* then the BO is being moved and we should
* store up the damage until later.
*/
- if (!drm_can_sleep())
+ if (drm_can_sleep())
ret = ast_bo_reserve(bo, true);
if (ret) {
if (ret != -EBUSY)
* then the BO is being moved and we should
* store up the damage until later.
*/
- if (!drm_can_sleep())
+ if (drm_can_sleep())
ret = cirrus_bo_reserve(bo, true);
if (ret) {
if (ret != -EBUSY)
config DRM_EXYNOS_IPP
bool "Exynos DRM IPP"
- depends on DRM_EXYNOS && !ARCH_MULTIPLATFORM
+ depends on DRM_EXYNOS
help
Choose this option if you want to use IPP feature for DRM.
config DRM_EXYNOS_GSC
bool "Exynos DRM GSC"
- depends on DRM_EXYNOS_IPP && ARCH_EXYNOS5
+ depends on DRM_EXYNOS_IPP && ARCH_EXYNOS5 && !ARCH_MULTIPLATFORM
help
Choose this option if you want to use Exynos GSC for DRM.
file->driver_priv = file_priv;
ret = exynos_drm_subdrv_open(dev, file);
- if (ret) {
- kfree(file_priv);
- file->driver_priv = NULL;
- }
+ if (ret)
+ goto out;
anon_filp = anon_inode_getfile("exynos_gem", &exynos_drm_gem_fops,
NULL, 0);
if (IS_ERR(anon_filp)) {
- kfree(file_priv);
- return PTR_ERR(anon_filp);
+ ret = PTR_ERR(anon_filp);
+ goto out;
}
anon_filp->f_mode = FMODE_READ | FMODE_WRITE;
file_priv->anon_filp = anon_filp;
+ return ret;
+out:
+ kfree(file_priv);
+ file->driver_priv = NULL;
return ret;
}
reg_type = REG_TYPE_NONE;
DRM_ERROR("Unknown register offset![%d]\n", reg_offset);
break;
- };
+ }
return reg_type;
}
#include <linux/types.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
-#include <plat/map-base.h>
#include <drm/drmP.h>
#include <drm/exynos_drm.h>
DRM_DEBUG_KMS("count[%d]e[0x%x]\n", count++, (int)e);
/*
- * quf == NULL condition means all event deletion.
+ * qbuf == NULL condition means all event deletion.
* stop operations want to delete all event list.
* another case delete only same buf id.
*/
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
+#include <linux/hdmi.h>
#include <drm/exynos_drm.h>
#define HDMI_AUI_VERSION 0x01
#define HDMI_AUI_LENGTH 0x0A
-/* HDMI infoframe to configure HDMI out packet header, AUI and AVI */
-enum HDMI_PACKET_TYPE {
- /* refer to Table 5-8 Packet Type in HDMI specification v1.4a */
- /* InfoFrame packet type */
- HDMI_PACKET_TYPE_INFOFRAME = 0x80,
- /* Vendor-Specific InfoFrame */
- HDMI_PACKET_TYPE_VSI = HDMI_PACKET_TYPE_INFOFRAME + 1,
- /* Auxiliary Video information InfoFrame */
- HDMI_PACKET_TYPE_AVI = HDMI_PACKET_TYPE_INFOFRAME + 2,
- /* Audio information InfoFrame */
- HDMI_PACKET_TYPE_AUI = HDMI_PACKET_TYPE_INFOFRAME + 4
-};
-
enum hdmi_type {
HDMI_TYPE13,
HDMI_TYPE14,
},
};
-struct hdmi_infoframe {
- enum HDMI_PACKET_TYPE type;
- u8 ver;
- u8 len;
-};
-
static inline u32 hdmi_reg_read(struct hdmi_context *hdata, u32 reg_id)
{
return readl(hdata->regs + reg_id);
}
static void hdmi_reg_infoframe(struct hdmi_context *hdata,
- struct hdmi_infoframe *infoframe)
+ union hdmi_infoframe *infoframe)
{
u32 hdr_sum;
u8 chksum;
return;
}
- switch (infoframe->type) {
- case HDMI_PACKET_TYPE_AVI:
+ switch (infoframe->any.type) {
+ case HDMI_INFOFRAME_TYPE_AVI:
hdmi_reg_writeb(hdata, HDMI_AVI_CON, HDMI_AVI_CON_EVERY_VSYNC);
- hdmi_reg_writeb(hdata, HDMI_AVI_HEADER0, infoframe->type);
- hdmi_reg_writeb(hdata, HDMI_AVI_HEADER1, infoframe->ver);
- hdmi_reg_writeb(hdata, HDMI_AVI_HEADER2, infoframe->len);
- hdr_sum = infoframe->type + infoframe->ver + infoframe->len;
+ hdmi_reg_writeb(hdata, HDMI_AVI_HEADER0, infoframe->any.type);
+ hdmi_reg_writeb(hdata, HDMI_AVI_HEADER1,
+ infoframe->any.version);
+ hdmi_reg_writeb(hdata, HDMI_AVI_HEADER2, infoframe->any.length);
+ hdr_sum = infoframe->any.type + infoframe->any.version +
+ infoframe->any.length;
/* Output format zero hardcoded ,RGB YBCR selection */
hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(1), 0 << 5 |
hdmi_reg_writeb(hdata, HDMI_AVI_BYTE(4), vic);
chksum = hdmi_chksum(hdata, HDMI_AVI_BYTE(1),
- infoframe->len, hdr_sum);
+ infoframe->any.length, hdr_sum);
DRM_DEBUG_KMS("AVI checksum = 0x%x\n", chksum);
hdmi_reg_writeb(hdata, HDMI_AVI_CHECK_SUM, chksum);
break;
- case HDMI_PACKET_TYPE_AUI:
+ case HDMI_INFOFRAME_TYPE_AUDIO:
hdmi_reg_writeb(hdata, HDMI_AUI_CON, 0x02);
- hdmi_reg_writeb(hdata, HDMI_AUI_HEADER0, infoframe->type);
- hdmi_reg_writeb(hdata, HDMI_AUI_HEADER1, infoframe->ver);
- hdmi_reg_writeb(hdata, HDMI_AUI_HEADER2, infoframe->len);
- hdr_sum = infoframe->type + infoframe->ver + infoframe->len;
+ hdmi_reg_writeb(hdata, HDMI_AUI_HEADER0, infoframe->any.type);
+ hdmi_reg_writeb(hdata, HDMI_AUI_HEADER1,
+ infoframe->any.version);
+ hdmi_reg_writeb(hdata, HDMI_AUI_HEADER2, infoframe->any.length);
+ hdr_sum = infoframe->any.type + infoframe->any.version +
+ infoframe->any.length;
chksum = hdmi_chksum(hdata, HDMI_AUI_BYTE(1),
- infoframe->len, hdr_sum);
+ infoframe->any.length, hdr_sum);
DRM_DEBUG_KMS("AUI checksum = 0x%x\n", chksum);
hdmi_reg_writeb(hdata, HDMI_AUI_CHECK_SUM, chksum);
break;
static void hdmi_conf_init(struct hdmi_context *hdata)
{
- struct hdmi_infoframe infoframe;
+ union hdmi_infoframe infoframe;
/* disable HPD interrupts from HDMI IP block, use GPIO instead */
hdmi_reg_writemask(hdata, HDMI_INTC_CON, 0, HDMI_INTC_EN_GLOBAL |
hdmi_reg_writeb(hdata, HDMI_V13_AUI_CON, 0x02);
hdmi_reg_writeb(hdata, HDMI_V13_ACR_CON, 0x04);
} else {
- infoframe.type = HDMI_PACKET_TYPE_AVI;
- infoframe.ver = HDMI_AVI_VERSION;
- infoframe.len = HDMI_AVI_LENGTH;
+ infoframe.any.type = HDMI_INFOFRAME_TYPE_AVI;
+ infoframe.any.version = HDMI_AVI_VERSION;
+ infoframe.any.length = HDMI_AVI_LENGTH;
hdmi_reg_infoframe(hdata, &infoframe);
- infoframe.type = HDMI_PACKET_TYPE_AUI;
- infoframe.ver = HDMI_AUI_VERSION;
- infoframe.len = HDMI_AUI_LENGTH;
+ infoframe.any.type = HDMI_INFOFRAME_TYPE_AUDIO;
+ infoframe.any.version = HDMI_AUI_VERSION;
+ infoframe.any.length = HDMI_AUI_LENGTH;
hdmi_reg_infoframe(hdata, &infoframe);
/* enable AVI packet every vsync, fixes purple line problem */
# define PLL_SERIAL_1_SRL_IZ(x) (((x) & 3) << 1)
# define PLL_SERIAL_1_SRL_MAN_IZ (1 << 6)
#define REG_PLL_SERIAL_2 REG(0x02, 0x01) /* read/write */
-# define PLL_SERIAL_2_SRL_NOSC(x) (((x) & 3) << 0)
+# define PLL_SERIAL_2_SRL_NOSC(x) ((x) << 0)
# define PLL_SERIAL_2_SRL_PR(x) (((x) & 0xf) << 4)
#define REG_PLL_SERIAL_3 REG(0x02, 0x02) /* read/write */
# define PLL_SERIAL_3_SRL_CCIR (1 << 0)
{
uint8_t buf[PB(5) + 1];
+ memset(buf, 0, sizeof(buf));
buf[HB(0)] = 0x84;
buf[HB(1)] = 0x01;
buf[HB(2)] = 10;
- buf[PB(0)] = 0;
buf[PB(1)] = p->audio_frame[1] & 0x07; /* CC */
buf[PB(2)] = p->audio_frame[2] & 0x1c; /* SF */
buf[PB(4)] = p->audio_frame[4];
}
div = 148500 / mode->clock;
+ if (div != 0) {
+ div--;
+ if (div > 3)
+ div = 3;
+ }
/* mute the audio FIFO: */
reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
if (priv->rev == TDA19988) {
/* let incoming pixels fill the active space (if any) */
- reg_write(encoder, REG_ENABLE_SPACE, 0x01);
+ reg_write(encoder, REG_ENABLE_SPACE, 0x00);
}
/* must be last register set: */
{
struct tda998x_priv *priv = to_tda998x_priv(encoder);
drm_i2c_encoder_destroy(encoder);
+ if (priv->cec)
+ i2c_unregister_device(priv->cec);
kfree(priv);
}
priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1);
priv->vip_cntrl_2 = VIP_CNTRL_2_SWAP_E(4) | VIP_CNTRL_2_SWAP_F(5);
- priv->current_page = 0;
+ priv->current_page = 0xff;
priv->cec = i2c_new_dummy(client->adapter, 0x34);
+ if (!priv->cec)
+ return -ENODEV;
priv->dpms = DRM_MODE_DPMS_OFF;
encoder_slave->slave_priv = priv;
/* Early gen2 have a totally busted CS tlb and require pinned batches. */
#define HAS_BROKEN_CS_TLB(dev) (IS_I830(dev) || IS_845G(dev))
+/*
+ * dp aux and gmbus irq on gen4 seems to be able to generate legacy interrupts
+ * even when in MSI mode. This results in spurious interrupt warnings if the
+ * legacy irq no. is shared with another device. The kernel then disables that
+ * interrupt source and so prevents the other device from working properly.
+ */
+#define HAS_AUX_IRQ(dev) (INTEL_INFO(dev)->gen >= 5)
+#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5)
/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
* rows, which changed the alignment requirements and fence programming.
va_list tmp;
va_copy(tmp, args);
- if (!__i915_error_seek(e, vsnprintf(NULL, 0, f, tmp)))
+ len = vsnprintf(NULL, 0, f, tmp);
+ va_end(tmp);
+
+ if (!__i915_error_seek(e, len))
return;
}
vbl_start = mode->crtc_vblank_start * mode->crtc_htotal;
} else {
- enum transcoder cpu_transcoder =
- intel_pipe_to_cpu_transcoder(dev_priv, pipe);
+ enum transcoder cpu_transcoder = (enum transcoder) pipe;
u32 htotal;
htotal = ((I915_READ(HTOTAL(cpu_transcoder)) >> 16) & 0x1fff) + 1;
int i, ret, recv_bytes;
uint32_t status;
int try, precharge, clock = 0;
- bool has_aux_irq = true;
+ bool has_aux_irq = HAS_AUX_IRQ(dev);
uint32_t timeout;
/* dp aux is extremely sensitive to irq latency, hence request the
mutex_unlock(&dev_priv->dpio_lock);
- /* init power sequencer on this pipe and port */
- intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
- intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
- &power_seq);
+ if (is_edp(intel_dp)) {
+ /* init power sequencer on this pipe and port */
+ intel_dp_init_panel_power_sequencer(dev, intel_dp, &power_seq);
+ intel_dp_init_panel_power_sequencer_registers(dev, intel_dp,
+ &power_seq);
+ }
intel_enable_dp(encoder);
algo->data = bus;
}
-/*
- * gmbus on gen4 seems to be able to generate legacy interrupts even when in MSI
- * mode. This results in spurious interrupt warnings if the legacy irq no. is
- * shared with another device. The kernel then disables that interrupt source
- * and so prevents the other device from working properly.
- */
-#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5)
static int
gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
u32 gmbus2_status,
#define ACPI_DIGITAL_OUTPUT (3<<8)
#define ACPI_LVDS_OUTPUT (4<<8)
+#define MAX_DSLP 1500
+
#ifdef CONFIG_ACPI
static int swsci(struct drm_device *dev, u32 function, u32 parm, u32 *parm_out)
{
/* The spec says 2ms should be the default, but it's too small
* for some machines. */
dslp = 50;
- } else if (dslp > 500) {
+ } else if (dslp > MAX_DSLP) {
/* Hey bios, trust must be earned. */
- WARN_ONCE(1, "excessive driver sleep timeout (DSPL) %u\n", dslp);
- dslp = 500;
+ DRM_INFO_ONCE("ACPI BIOS requests an excessive sleep of %u ms, "
+ "using %u ms instead\n", dslp, MAX_DSLP);
+ dslp = MAX_DSLP;
}
/* The spec tells us to do this, but we are the only user... */
* then the BO is being moved and we should
* store up the damage until later.
*/
- if (!drm_can_sleep())
+ if (drm_can_sleep())
ret = mgag200_bo_reserve(bo, true);
if (ret) {
if (ret != -EBUSY)
(mga_vga_calculate_mode_bandwidth(mode, bpp)
> (32700 * 1024))) {
return MODE_BANDWIDTH;
- } else if (mode->type == G200_EH &&
+ } else if (mdev->type == G200_EH &&
(mga_vga_calculate_mode_bandwidth(mode, bpp)
> (37500 * 1024))) {
return MODE_BANDWIDTH;
- } else if (mode->type == G200_ER &&
+ } else if (mdev->type == G200_ER &&
(mga_vga_calculate_mode_bandwidth(mode,
bpp) > (55000 * 1024))) {
return MODE_BANDWIDTH;
tristate "MSM DRM"
depends on DRM
depends on MSM_IOMMU
- depends on (ARCH_MSM && ARCH_MSM8960) || (ARM && COMPILE_TEST)
+ depends on ARCH_MSM8960 || (ARM && COMPILE_TEST)
select DRM_KMS_HELPER
select SHMEM
select TMPFS
spinlock_t lock;
bool stale;
uint32_t width, height;
+ uint32_t x, y;
/* next cursor to scan-out: */
uint32_t next_iova;
#define PENDING_FLIP 0x2
atomic_t pending;
- /* the fb that we currently hold a scanout ref to: */
+ /* the fb that we logically (from PoV of KMS API) hold a ref
+ * to. Which we may not yet be scanning out (we may still
+ * be scanning out previous in case of page_flip while waiting
+ * for gpu rendering to complete:
+ */
struct drm_framebuffer *fb;
+ /* the fb that we currently hold a scanout ref to: */
+ struct drm_framebuffer *scanout_fb;
+
/* for unref'ing framebuffers after scanout completes: */
struct drm_flip_work unref_fb_work;
return to_mdp4_kms(to_mdp_kms(priv->kms));
}
-static void update_fb(struct drm_crtc *crtc, bool async,
- struct drm_framebuffer *new_fb)
+static void request_pending(struct drm_crtc *crtc, uint32_t pending)
{
struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
- struct drm_framebuffer *old_fb = mdp4_crtc->fb;
- if (old_fb)
- drm_flip_work_queue(&mdp4_crtc->unref_fb_work, old_fb);
+ atomic_or(pending, &mdp4_crtc->pending);
+ mdp_irq_register(&get_kms(crtc)->base, &mdp4_crtc->vblank);
+}
+
+static void crtc_flush(struct drm_crtc *crtc)
+{
+ struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
+ struct mdp4_kms *mdp4_kms = get_kms(crtc);
+ uint32_t i, flush = 0;
+
+ for (i = 0; i < ARRAY_SIZE(mdp4_crtc->planes); i++) {
+ struct drm_plane *plane = mdp4_crtc->planes[i];
+ if (plane) {
+ enum mdp4_pipe pipe_id = mdp4_plane_pipe(plane);
+ flush |= pipe2flush(pipe_id);
+ }
+ }
+ flush |= ovlp2flush(mdp4_crtc->ovlp);
+
+ DBG("%s: flush=%08x", mdp4_crtc->name, flush);
+
+ mdp4_write(mdp4_kms, REG_MDP4_OVERLAY_FLUSH, flush);
+}
+
+static void update_fb(struct drm_crtc *crtc, struct drm_framebuffer *new_fb)
+{
+ struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
+ struct drm_framebuffer *old_fb = mdp4_crtc->fb;
/* grab reference to incoming scanout fb: */
drm_framebuffer_reference(new_fb);
mdp4_crtc->base.fb = new_fb;
mdp4_crtc->fb = new_fb;
- if (!async) {
- /* enable vblank to pick up the old_fb */
- mdp_irq_register(&get_kms(crtc)->base, &mdp4_crtc->vblank);
- }
+ if (old_fb)
+ drm_flip_work_queue(&mdp4_crtc->unref_fb_work, old_fb);
+}
+
+/* unlike update_fb(), take a ref to the new scanout fb *before* updating
+ * plane, then call this. Needed to ensure we don't unref the buffer that
+ * is actually still being scanned out.
+ *
+ * Note that this whole thing goes away with atomic.. since we can defer
+ * calling into driver until rendering is done.
+ */
+static void update_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb)
+{
+ struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
+
+ /* flush updates, to make sure hw is updated to new scanout fb,
+ * so that we can safely queue unref to current fb (ie. next
+ * vblank we know hw is done w/ previous scanout_fb).
+ */
+ crtc_flush(crtc);
+
+ if (mdp4_crtc->scanout_fb)
+ drm_flip_work_queue(&mdp4_crtc->unref_fb_work,
+ mdp4_crtc->scanout_fb);
+
+ mdp4_crtc->scanout_fb = fb;
+
+ /* enable vblank to complete flip: */
+ request_pending(crtc, PENDING_FLIP);
}
/* if file!=NULL, this is preclose potential cancel-flip path */
spin_unlock_irqrestore(&dev->event_lock, flags);
}
-static void crtc_flush(struct drm_crtc *crtc)
-{
- struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
- struct mdp4_kms *mdp4_kms = get_kms(crtc);
- uint32_t i, flush = 0;
-
- for (i = 0; i < ARRAY_SIZE(mdp4_crtc->planes); i++) {
- struct drm_plane *plane = mdp4_crtc->planes[i];
- if (plane) {
- enum mdp4_pipe pipe_id = mdp4_plane_pipe(plane);
- flush |= pipe2flush(pipe_id);
- }
- }
- flush |= ovlp2flush(mdp4_crtc->ovlp);
-
- DBG("%s: flush=%08x", mdp4_crtc->name, flush);
-
- mdp4_write(mdp4_kms, REG_MDP4_OVERLAY_FLUSH, flush);
-}
-
-static void request_pending(struct drm_crtc *crtc, uint32_t pending)
-{
- struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
-
- atomic_or(pending, &mdp4_crtc->pending);
- mdp_irq_register(&get_kms(crtc)->base, &mdp4_crtc->vblank);
-}
-
static void pageflip_cb(struct msm_fence_cb *cb)
{
struct mdp4_crtc *mdp4_crtc =
if (!fb)
return;
+ drm_framebuffer_reference(fb);
mdp4_plane_set_scanout(mdp4_crtc->plane, fb);
- crtc_flush(crtc);
-
- /* enable vblank to complete flip: */
- request_pending(crtc, PENDING_FLIP);
+ update_scanout(crtc, fb);
}
static void unref_fb_worker(struct drm_flip_work *work, void *val)
mode->vsync_end, mode->vtotal,
mode->type, mode->flags);
+ /* grab extra ref for update_scanout() */
+ drm_framebuffer_reference(crtc->fb);
+
+ ret = mdp4_plane_mode_set(mdp4_crtc->plane, crtc, crtc->fb,
+ 0, 0, mode->hdisplay, mode->vdisplay,
+ x << 16, y << 16,
+ mode->hdisplay << 16, mode->vdisplay << 16);
+ if (ret) {
+ drm_framebuffer_unreference(crtc->fb);
+ dev_err(crtc->dev->dev, "%s: failed to set mode on plane: %d\n",
+ mdp4_crtc->name, ret);
+ return ret;
+ }
+
mdp4_write(mdp4_kms, REG_MDP4_DMA_SRC_SIZE(dma),
MDP4_DMA_SRC_SIZE_WIDTH(mode->hdisplay) |
MDP4_DMA_SRC_SIZE_HEIGHT(mode->vdisplay));
mdp4_write(mdp4_kms, REG_MDP4_OVLP_CFG(ovlp), 1);
- update_fb(crtc, false, crtc->fb);
-
- ret = mdp4_plane_mode_set(mdp4_crtc->plane, crtc, crtc->fb,
- 0, 0, mode->hdisplay, mode->vdisplay,
- x << 16, y << 16,
- mode->hdisplay << 16, mode->vdisplay << 16);
- if (ret) {
- dev_err(crtc->dev->dev, "%s: failed to set mode on plane: %d\n",
- mdp4_crtc->name, ret);
- return ret;
- }
-
if (dma == DMA_E) {
mdp4_write(mdp4_kms, REG_MDP4_DMA_E_QUANT(0), 0x00ff0000);
mdp4_write(mdp4_kms, REG_MDP4_DMA_E_QUANT(1), 0x00ff0000);
mdp4_write(mdp4_kms, REG_MDP4_DMA_E_QUANT(2), 0x00ff0000);
}
+ update_fb(crtc, crtc->fb);
+ update_scanout(crtc, crtc->fb);
+
return 0;
}
struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
struct drm_plane *plane = mdp4_crtc->plane;
struct drm_display_mode *mode = &crtc->mode;
+ int ret;
- update_fb(crtc, false, crtc->fb);
+ /* grab extra ref for update_scanout() */
+ drm_framebuffer_reference(crtc->fb);
- return mdp4_plane_mode_set(plane, crtc, crtc->fb,
+ ret = mdp4_plane_mode_set(plane, crtc, crtc->fb,
0, 0, mode->hdisplay, mode->vdisplay,
x << 16, y << 16,
mode->hdisplay << 16, mode->vdisplay << 16);
+ if (ret) {
+ drm_framebuffer_unreference(crtc->fb);
+ return ret;
+ }
+
+ update_fb(crtc, crtc->fb);
+ update_scanout(crtc, crtc->fb);
+
+ return 0;
}
static void mdp4_crtc_load_lut(struct drm_crtc *crtc)
mdp4_crtc->event = event;
spin_unlock_irqrestore(&dev->event_lock, flags);
- update_fb(crtc, true, new_fb);
+ update_fb(crtc, new_fb);
return msm_gem_queue_inactive_cb(obj, &mdp4_crtc->pageflip_cb);
}
static void update_cursor(struct drm_crtc *crtc)
{
struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
+ struct mdp4_kms *mdp4_kms = get_kms(crtc);
enum mdp4_dma dma = mdp4_crtc->dma;
unsigned long flags;
spin_lock_irqsave(&mdp4_crtc->cursor.lock, flags);
if (mdp4_crtc->cursor.stale) {
- struct mdp4_kms *mdp4_kms = get_kms(crtc);
struct drm_gem_object *next_bo = mdp4_crtc->cursor.next_bo;
struct drm_gem_object *prev_bo = mdp4_crtc->cursor.scanout_bo;
uint32_t iova = mdp4_crtc->cursor.next_iova;
mdp4_crtc->cursor.scanout_bo = next_bo;
mdp4_crtc->cursor.stale = false;
}
+
+ mdp4_write(mdp4_kms, REG_MDP4_DMA_CURSOR_POS(dma),
+ MDP4_DMA_CURSOR_POS_X(mdp4_crtc->cursor.x) |
+ MDP4_DMA_CURSOR_POS_Y(mdp4_crtc->cursor.y));
+
spin_unlock_irqrestore(&mdp4_crtc->cursor.lock, flags);
}
drm_gem_object_unreference_unlocked(old_bo);
}
+ crtc_flush(crtc);
request_pending(crtc, PENDING_CURSOR);
return 0;
static int mdp4_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
{
struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc);
- struct mdp4_kms *mdp4_kms = get_kms(crtc);
- enum mdp4_dma dma = mdp4_crtc->dma;
+ unsigned long flags;
- mdp4_write(mdp4_kms, REG_MDP4_DMA_CURSOR_POS(dma),
- MDP4_DMA_CURSOR_POS_X(x) |
- MDP4_DMA_CURSOR_POS_Y(y));
+ spin_lock_irqsave(&mdp4_crtc->cursor.lock, flags);
+ mdp4_crtc->cursor.x = x;
+ mdp4_crtc->cursor.y = y;
+ spin_unlock_irqrestore(&mdp4_crtc->cursor.lock, flags);
+
+ crtc_flush(crtc);
+ request_pending(crtc, PENDING_CURSOR);
return 0;
}
crtc = &mdp4_crtc->base;
mdp4_crtc->plane = plane;
+ mdp4_crtc->id = id;
mdp4_crtc->ovlp = ovlp_id;
mdp4_crtc->dma = dma_id;
MDP4_PIPE_DST_SIZE_HEIGHT(crtc_h));
mdp4_write(mdp4_kms, REG_MDP4_PIPE_DST_XY(pipe),
- MDP4_PIPE_SRC_XY_X(crtc_x) |
- MDP4_PIPE_SRC_XY_Y(crtc_y));
+ MDP4_PIPE_DST_XY_X(crtc_x) |
+ MDP4_PIPE_DST_XY_Y(crtc_y));
mdp4_plane_set_scanout(plane, fb);
x << 16, y << 16,
mode->hdisplay << 16, mode->vdisplay << 16);
if (ret) {
+ drm_framebuffer_unreference(crtc->fb);
dev_err(crtc->dev->dev, "%s: failed to set mode on plane: %d\n",
mdp5_crtc->name, ret);
return ret;
0, 0, mode->hdisplay, mode->vdisplay,
x << 16, y << 16,
mode->hdisplay << 16, mode->vdisplay << 16);
+ if (ret) {
+ drm_framebuffer_unreference(crtc->fb);
+ return ret;
+ }
update_fb(crtc, crtc->fb);
update_scanout(crtc, crtc->fb);
- return ret;
+ return 0;
}
static void mdp5_crtc_load_lut(struct drm_crtc *crtc)
fail:
if (obj)
- drm_gem_object_unreference_unlocked(obj);
+ drm_gem_object_unreference(obj);
return ERR_PTR(ret);
}
/* if locking succeeded, pin bo: */
- ret = msm_gem_get_iova(&msm_obj->base,
+ ret = msm_gem_get_iova_locked(&msm_obj->base,
submit->gpu->id, &iova);
/* this would break the logic in the fail path.. there is no
/* For now, just map the entire thing. Eventually we probably
* to do it page-by-page, w/ kmap() if not vmap()d..
*/
- ptr = msm_gem_vaddr(&obj->base);
+ ptr = msm_gem_vaddr_locked(&obj->base);
if (IS_ERR(ptr)) {
ret = PTR_ERR(ptr);
{
unsigned i;
- mutex_lock(&submit->dev->struct_mutex);
for (i = 0; i < submit->nr_bos; i++) {
struct msm_gem_object *msm_obj = submit->bos[i].obj;
submit_unlock_unpin_bo(submit, i);
list_del_init(&msm_obj->submit_entry);
drm_gem_object_unreference(&msm_obj->base);
}
- mutex_unlock(&submit->dev->struct_mutex);
ww_acquire_fini(&submit->ticket);
kfree(submit);
if (args->nr_cmds > MAX_CMDS)
return -EINVAL;
+ mutex_lock(&dev->struct_mutex);
+
submit = submit_create(dev, gpu, args->nr_bos);
if (!submit) {
ret = -ENOMEM;
out:
if (submit)
submit_cleanup(submit, !!ret);
+ mutex_unlock(&dev->struct_mutex);
return ret;
}
struct msm_drm_private *priv = dev->dev_private;
int i, ret;
- mutex_lock(&dev->struct_mutex);
-
submit->fence = ++priv->next_fence;
gpu->submitted_fence = submit->fence;
msm_gem_move_to_active(&msm_obj->base, gpu, true, submit->fence);
}
hangcheck_timer_reset(gpu);
- mutex_unlock(&dev->struct_mutex);
return ret;
}
#include "cypress_dpm.h"
#include "btc_dpm.h"
#include "atom.h"
+#include <linux/seq_file.h>
#define MC_CG_ARB_FREQ_F0 0x0a
#define MC_CG_ARB_FREQ_F1 0x0b
r600_free_extended_power_table(rdev);
}
+void btc_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
+ struct seq_file *m)
+{
+ struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
+ struct radeon_ps *rps = &eg_pi->current_rps;
+ struct rv7xx_ps *ps = rv770_get_ps(rps);
+ struct rv7xx_pl *pl;
+ u32 current_index =
+ (RREG32(TARGET_AND_CURRENT_PROFILE_INDEX) & CURRENT_PROFILE_INDEX_MASK) >>
+ CURRENT_PROFILE_INDEX_SHIFT;
+
+ if (current_index > 2) {
+ seq_printf(m, "invalid dpm profile %d\n", current_index);
+ } else {
+ if (current_index == 0)
+ pl = &ps->low;
+ else if (current_index == 1)
+ pl = &ps->medium;
+ else /* current_index == 2 */
+ pl = &ps->high;
+ seq_printf(m, "uvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
+ if (rdev->family >= CHIP_CEDAR) {
+ seq_printf(m, "power level %d sclk: %u mclk: %u vddc: %u vddci: %u\n",
+ current_index, pl->sclk, pl->mclk, pl->vddc, pl->vddci);
+ } else {
+ seq_printf(m, "power level %d sclk: %u mclk: %u vddc: %u\n",
+ current_index, pl->sclk, pl->mclk, pl->vddc);
+ }
+ }
+}
+
u32 btc_dpm_get_sclk(struct radeon_device *rdev, bool low)
{
struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
# define DYN_SPREAD_SPECTRUM_EN (1 << 23)
# define AC_DC_SW (1 << 24)
+#define TARGET_AND_CURRENT_PROFILE_INDEX 0x66c
+# define CURRENT_PROFILE_INDEX_MASK (0xf << 4)
+# define CURRENT_PROFILE_INDEX_SHIFT 4
+
#define CG_BIF_REQ_AND_RSP 0x7f4
#define CG_CLIENT_REQ(x) ((x) << 0)
#define CG_CLIENT_REQ_MASK (0xff << 0)
int kv_dpm_late_enable(struct radeon_device *rdev)
{
- int ret;
+ int ret = 0;
if (rdev->irq.installed &&
r600_is_internal_thermal_sensor(rdev->pm.int_thermal_type)) {
struct rv7xx_power_info *pi = rv770_get_pi(rdev);
struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
struct ni_ps *ps = ni_get_ps(rps);
- u16 vddc;
struct rv7xx_pl *pl = &ps->performance_levels[index];
ps->performance_level_count = index + 1;
/* patch up vddc if necessary */
if (pl->vddc == 0xff01) {
- if (radeon_atom_get_max_vddc(rdev, 0, 0, &vddc) == 0)
- pl->vddc = vddc;
+ if (pi->max_vddc)
+ pl->vddc = pi->max_vddc;
}
if (rps->class & ATOM_PPLIB_CLASSIFICATION_ACPI) {
void ni_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
struct seq_file *m)
{
- struct radeon_ps *rps = rdev->pm.dpm.current_ps;
+ struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
+ struct radeon_ps *rps = &eg_pi->current_rps;
struct ni_ps *ps = ni_get_ps(rps);
struct rv7xx_pl *pl;
u32 current_index =
break;
}
break;
+ case 124: /* UVD */
+ DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data);
+ radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX);
+ break;
case 176: /* CP_INT in ring buffer */
case 177: /* CP_INT in IB1 */
case 178: /* CP_INT in IB2 */
case R_008C64_SQ_VSTMP_RING_SIZE:
case R_0288C8_SQ_GS_VERT_ITEMSIZE:
/* get value to populate the IB don't remove */
- tmp =radeon_get_ib_value(p, idx);
- ib[idx] = 0;
+ /*tmp =radeon_get_ib_value(p, idx);
+ ib[idx] = 0;*/
+ break;
+ case SQ_ESGS_RING_BASE:
+ case SQ_GSVS_RING_BASE:
+ case SQ_ESTMP_RING_BASE:
+ case SQ_GSTMP_RING_BASE:
+ case SQ_PSTMP_RING_BASE:
+ case SQ_VSTMP_RING_BASE:
+ r = radeon_cs_packet_next_reloc(p, &reloc, 0);
+ if (r) {
+ dev_warn(p->dev, "bad SET_CONTEXT_REG "
+ "0x%04X\n", reg);
+ return -EINVAL;
+ }
+ ib[idx] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
break;
case SQ_CONFIG:
track->sq_config = radeon_get_ib_value(p, idx);
.get_sclk = &btc_dpm_get_sclk,
.get_mclk = &btc_dpm_get_mclk,
.print_power_state = &rv770_dpm_print_power_state,
- .debugfs_print_current_performance_level = &rv770_dpm_debugfs_print_current_performance_level,
+ .debugfs_print_current_performance_level = &btc_dpm_debugfs_print_current_performance_level,
.force_performance_level = &rv770_dpm_force_performance_level,
.vblank_too_short = &btc_dpm_vblank_too_short,
},
u32 btc_dpm_get_sclk(struct radeon_device *rdev, bool low);
u32 btc_dpm_get_mclk(struct radeon_device *rdev, bool low);
bool btc_dpm_vblank_too_short(struct radeon_device *rdev);
+void btc_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
+ struct seq_file *m);
int sumo_dpm_init(struct radeon_device *rdev);
int sumo_dpm_enable(struct radeon_device *rdev);
int sumo_dpm_late_enable(struct radeon_device *rdev);
* 2.34.0 - Add CIK tiling mode array query
* 2.35.0 - Add CIK macrotile mode array query
* 2.36.0 - Fix CIK DCE tiling setup
+ * 2.37.0 - allow GS ring setup on r6xx/r7xx
*/
#define KMS_DRIVER_MAJOR 2
-#define KMS_DRIVER_MINOR 36
+#define KMS_DRIVER_MINOR 37
#define KMS_DRIVER_PATCHLEVEL 0
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
int radeon_driver_unload_kms(struct drm_device *dev);
0x00028A3C VGT_GROUP_VECT_1_FMT_CNTL
0x00028A40 VGT_GS_MODE
0x00028A6C VGT_GS_OUT_PRIM_TYPE
+0x00028B38 VGT_GS_MAX_VERT_OUT
0x000088C8 VGT_GS_PER_ES
0x000088E8 VGT_GS_PER_VS
0x000088D4 VGT_GS_VERTEX_REUSE
struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
struct rv7xx_ps *ps = rv770_get_ps(rps);
u32 sclk, mclk;
- u16 vddc;
struct rv7xx_pl *pl;
switch (index) {
/* patch up vddc if necessary */
if (pl->vddc == 0xff01) {
- if (radeon_atom_get_max_vddc(rdev, 0, 0, &vddc) == 0)
- pl->vddc = vddc;
+ if (pi->max_vddc)
+ pl->vddc = pi->max_vddc;
}
if (rps->class & ATOM_PPLIB_CLASSIFICATION_ACPI) {
break;
}
break;
+ case 124: /* UVD */
+ DRM_DEBUG("IH: UVD int: 0x%08x\n", src_data);
+ radeon_fence_process(rdev, R600_RING_TYPE_UVD_INDEX);
+ break;
case 146:
case 147:
addr = RREG32(VM_CONTEXT1_PROTECTION_FAULT_ADDR);
void si_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
struct seq_file *m)
{
- struct radeon_ps *rps = rdev->pm.dpm.current_ps;
+ struct evergreen_power_info *eg_pi = evergreen_get_pi(rdev);
+ struct radeon_ps *rps = &eg_pi->current_rps;
struct ni_ps *ps = ni_get_ps(rps);
struct rv7xx_pl *pl;
u32 current_index =
struct seq_file *m)
{
struct sumo_power_info *pi = sumo_get_pi(rdev);
- struct radeon_ps *rps = rdev->pm.dpm.current_ps;
+ struct radeon_ps *rps = &pi->current_rps;
struct sumo_ps *ps = sumo_get_ps(rps);
struct sumo_pl *pl;
u32 current_index =
void trinity_dpm_debugfs_print_current_performance_level(struct radeon_device *rdev,
struct seq_file *m)
{
- struct radeon_ps *rps = rdev->pm.dpm.current_ps;
+ struct trinity_power_info *pi = trinity_get_pi(rdev);
+ struct radeon_ps *rps = &pi->current_rps;
struct trinity_ps *ps = trinity_get_ps(rps);
struct trinity_pl *pl;
u32 current_index =
radeon_ring_write(ring, 0);
radeon_ring_write(ring, PACKET0(UVD_GPCOM_VCPU_CMD, 0));
radeon_ring_write(ring, 2);
- return;
}
/**
if (ret == 0) {
ref = drm_hash_entry(hash, struct ttm_ref_object, hash);
- if (!kref_get_unless_zero(&ref->kref)) {
+ if (kref_get_unless_zero(&ref->kref)) {
rcu_read_unlock();
break;
}
pgoff_t i;
struct page **page = ttm->pages;
+ if (ttm->page_flags & TTM_PAGE_FLAG_SG)
+ return;
+
for (i = 0; i < ttm->num_pages; ++i) {
(*page)->mapping = NULL;
(*page++)->index = 0;
float f;
} SVGA3dDevCapResult;
+typedef enum {
+ SVGA3DCAPS_RECORD_UNKNOWN = 0,
+ SVGA3DCAPS_RECORD_DEVCAPS_MIN = 0x100,
+ SVGA3DCAPS_RECORD_DEVCAPS = 0x100,
+ SVGA3DCAPS_RECORD_DEVCAPS_MAX = 0x1ff,
+} SVGA3dCapsRecordType;
+
+typedef
+struct SVGA3dCapsRecordHeader {
+ uint32 length;
+ SVGA3dCapsRecordType type;
+}
+SVGA3dCapsRecordHeader;
+
+typedef
+struct SVGA3dCapsRecord {
+ SVGA3dCapsRecordHeader header;
+ uint32 data[1];
+}
+SVGA3dCapsRecord;
+
+
+typedef uint32 SVGA3dCapPair[2];
+
#endif /* _SVGA3D_REG_H_ */
-typedef int (*vmw_scrub_func)(struct vmw_ctx_bindinfo *);
+typedef int (*vmw_scrub_func)(struct vmw_ctx_bindinfo *, bool);
static void vmw_user_context_free(struct vmw_resource *res);
static struct vmw_resource *
bool readback,
struct ttm_validate_buffer *val_buf);
static int vmw_gb_context_destroy(struct vmw_resource *res);
-static int vmw_context_scrub_shader(struct vmw_ctx_bindinfo *bi);
-static int vmw_context_scrub_render_target(struct vmw_ctx_bindinfo *bi);
-static int vmw_context_scrub_texture(struct vmw_ctx_bindinfo *bi);
+static int vmw_context_scrub_shader(struct vmw_ctx_bindinfo *bi, bool rebind);
+static int vmw_context_scrub_render_target(struct vmw_ctx_bindinfo *bi,
+ bool rebind);
+static int vmw_context_scrub_texture(struct vmw_ctx_bindinfo *bi, bool rebind);
+static void vmw_context_binding_state_scrub(struct vmw_ctx_binding_state *cbs);
static void vmw_context_binding_state_kill(struct vmw_ctx_binding_state *cbs);
static uint64_t vmw_user_context_size;
if (res->func->destroy == vmw_gb_context_destroy) {
mutex_lock(&dev_priv->cmdbuf_mutex);
+ mutex_lock(&dev_priv->binding_mutex);
+ (void) vmw_context_binding_state_kill
+ (&container_of(res, struct vmw_user_context, res)->cbs);
(void) vmw_gb_context_destroy(res);
if (dev_priv->pinned_bo != NULL &&
!dev_priv->query_cid_valid)
__vmw_execbuf_release_pinned_bo(dev_priv, NULL);
+ mutex_unlock(&dev_priv->binding_mutex);
mutex_unlock(&dev_priv->cmdbuf_mutex);
return;
}
BUG_ON(bo->mem.mem_type != VMW_PL_MOB);
mutex_lock(&dev_priv->binding_mutex);
- vmw_context_binding_state_kill(&uctx->cbs);
+ vmw_context_binding_state_scrub(&uctx->cbs);
submit_size = sizeof(*cmd2) + (readback ? sizeof(*cmd1) : 0);
SVGA3dCmdHeader header;
SVGA3dCmdDestroyGBContext body;
} *cmd;
- struct vmw_user_context *uctx =
- container_of(res, struct vmw_user_context, res);
-
- BUG_ON(!list_empty(&uctx->cbs.list));
if (likely(res->id == -1))
return 0;
* vmw_context_scrub_shader - scrub a shader binding from a context.
*
* @bi: single binding information.
+ * @rebind: Whether to issue a bind instead of scrub command.
*/
-static int vmw_context_scrub_shader(struct vmw_ctx_bindinfo *bi)
+static int vmw_context_scrub_shader(struct vmw_ctx_bindinfo *bi, bool rebind)
{
struct vmw_private *dev_priv = bi->ctx->dev_priv;
struct {
cmd->header.size = sizeof(cmd->body);
cmd->body.cid = bi->ctx->id;
cmd->body.type = bi->i1.shader_type;
- cmd->body.shid = SVGA3D_INVALID_ID;
+ cmd->body.shid =
+ cpu_to_le32((rebind) ? bi->res->id : SVGA3D_INVALID_ID);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
return 0;
* from a context.
*
* @bi: single binding information.
+ * @rebind: Whether to issue a bind instead of scrub command.
*/
-static int vmw_context_scrub_render_target(struct vmw_ctx_bindinfo *bi)
+static int vmw_context_scrub_render_target(struct vmw_ctx_bindinfo *bi,
+ bool rebind)
{
struct vmw_private *dev_priv = bi->ctx->dev_priv;
struct {
cmd->header.size = sizeof(cmd->body);
cmd->body.cid = bi->ctx->id;
cmd->body.type = bi->i1.rt_type;
- cmd->body.target.sid = SVGA3D_INVALID_ID;
+ cmd->body.target.sid =
+ cpu_to_le32((rebind) ? bi->res->id : SVGA3D_INVALID_ID);
cmd->body.target.face = 0;
cmd->body.target.mipmap = 0;
vmw_fifo_commit(dev_priv, sizeof(*cmd));
* vmw_context_scrub_texture - scrub a texture binding from a context.
*
* @bi: single binding information.
+ * @rebind: Whether to issue a bind instead of scrub command.
*
* TODO: Possibly complement this function with a function that takes
* a list of texture bindings and combines them to a single command.
*/
-static int vmw_context_scrub_texture(struct vmw_ctx_bindinfo *bi)
+static int vmw_context_scrub_texture(struct vmw_ctx_bindinfo *bi,
+ bool rebind)
{
struct vmw_private *dev_priv = bi->ctx->dev_priv;
struct {
cmd->body.c.cid = bi->ctx->id;
cmd->body.s1.stage = bi->i1.texture_stage;
cmd->body.s1.name = SVGA3D_TS_BIND_TEXTURE;
- cmd->body.s1.value = (uint32) SVGA3D_INVALID_ID;
+ cmd->body.s1.value =
+ cpu_to_le32((rebind) ? bi->res->id : SVGA3D_INVALID_ID);
vmw_fifo_commit(dev_priv, sizeof(*cmd));
return 0;
vmw_context_binding_drop(loc);
loc->bi = *bi;
+ loc->bi.scrubbed = false;
list_add_tail(&loc->ctx_list, &cbs->list);
INIT_LIST_HEAD(&loc->res_list);
if (loc->bi.ctx != NULL)
vmw_context_binding_drop(loc);
- loc->bi = *bi;
- list_add_tail(&loc->ctx_list, &cbs->list);
- if (bi->res != NULL)
+ if (bi->res != NULL) {
+ loc->bi = *bi;
+ list_add_tail(&loc->ctx_list, &cbs->list);
list_add_tail(&loc->res_list, &bi->res->binding_head);
- else
- INIT_LIST_HEAD(&loc->res_list);
+ }
}
/**
*/
static void vmw_context_binding_kill(struct vmw_ctx_binding *cb)
{
- (void) vmw_scrub_funcs[cb->bi.bt](&cb->bi);
+ if (!cb->bi.scrubbed) {
+ (void) vmw_scrub_funcs[cb->bi.bt](&cb->bi, false);
+ cb->bi.scrubbed = true;
+ }
vmw_context_binding_drop(cb);
}
vmw_context_binding_kill(entry);
}
+/**
+ * vmw_context_binding_state_scrub - Scrub all bindings associated with a
+ * struct vmw_ctx_binding state structure.
+ *
+ * @cbs: Pointer to the context binding state tracker.
+ *
+ * Emits commands to scrub all bindings associated with the
+ * context binding state tracker.
+ */
+static void vmw_context_binding_state_scrub(struct vmw_ctx_binding_state *cbs)
+{
+ struct vmw_ctx_binding *entry;
+
+ list_for_each_entry(entry, &cbs->list, ctx_list) {
+ if (!entry->bi.scrubbed) {
+ (void) vmw_scrub_funcs[entry->bi.bt](&entry->bi, false);
+ entry->bi.scrubbed = true;
+ }
+ }
+}
+
/**
* vmw_context_binding_res_list_kill - Kill all bindings on a
* resource binding list
vmw_context_binding_kill(entry);
}
+/**
+ * vmw_context_binding_res_list_scrub - Scrub all bindings on a
+ * resource binding list
+ *
+ * @head: list head of resource binding list
+ *
+ * Scrub all bindings associated with a specific resource. Typically
+ * called before the resource is evicted.
+ */
+void vmw_context_binding_res_list_scrub(struct list_head *head)
+{
+ struct vmw_ctx_binding *entry;
+
+ list_for_each_entry(entry, head, res_list) {
+ if (!entry->bi.scrubbed) {
+ (void) vmw_scrub_funcs[entry->bi.bt](&entry->bi, false);
+ entry->bi.scrubbed = true;
+ }
+ }
+}
+
/**
* vmw_context_binding_state_transfer - Commit staged binding info
*
list_for_each_entry_safe(entry, next, &from->list, ctx_list)
vmw_context_binding_transfer(&uctx->cbs, &entry->bi);
}
+
+/**
+ * vmw_context_rebind_all - Rebind all scrubbed bindings of a context
+ *
+ * @ctx: The context resource
+ *
+ * Walks through the context binding list and rebinds all scrubbed
+ * resources.
+ */
+int vmw_context_rebind_all(struct vmw_resource *ctx)
+{
+ struct vmw_ctx_binding *entry;
+ struct vmw_user_context *uctx =
+ container_of(ctx, struct vmw_user_context, res);
+ struct vmw_ctx_binding_state *cbs = &uctx->cbs;
+ int ret;
+
+ list_for_each_entry(entry, &cbs->list, ctx_list) {
+ if (likely(!entry->bi.scrubbed))
+ continue;
+
+ if (WARN_ON(entry->bi.res == NULL || entry->bi.res->id ==
+ SVGA3D_INVALID_ID))
+ continue;
+
+ ret = vmw_scrub_funcs[entry->bi.bt](&entry->bi, true);
+ if (unlikely(ret != 0))
+ return ret;
+
+ entry->bi.scrubbed = false;
+ }
+
+ return 0;
+}
+
+/**
+ * vmw_context_binding_list - Return a list of context bindings
+ *
+ * @ctx: The context resource
+ *
+ * Returns the current list of bindings of the given context. Note that
+ * this list becomes stale as soon as the dev_priv::binding_mutex is unlocked.
+ */
+struct list_head *vmw_context_binding_list(struct vmw_resource *ctx)
+{
+ return &(container_of(ctx, struct vmw_user_context, res)->cbs.list);
+}
drm_master_put(&vmw_fp->locked_master);
}
+ vmw_compat_shader_man_destroy(vmw_fp->shman);
ttm_object_file_release(&vmw_fp->tfile);
kfree(vmw_fp);
}
if (unlikely(vmw_fp->tfile == NULL))
goto out_no_tfile;
+ vmw_fp->shman = vmw_compat_shader_man_create(dev_priv);
+ if (IS_ERR(vmw_fp->shman))
+ goto out_no_shman;
+
file_priv->driver_priv = vmw_fp;
dev_priv->bdev.dev_mapping = dev->dev_mapping;
return 0;
+out_no_shman:
+ ttm_object_file_release(&vmw_fp->tfile);
out_no_tfile:
kfree(vmw_fp);
return ret;
#define VMW_RES_FENCE ttm_driver_type3
#define VMW_RES_SHADER ttm_driver_type4
+struct vmw_compat_shader_manager;
+
struct vmw_fpriv {
struct drm_master *locked_master;
struct ttm_object_file *tfile;
struct list_head fence_events;
+ bool gb_aware;
+ struct vmw_compat_shader_manager *shman;
};
struct vmw_dma_buffer {
struct vmw_resource *ctx;
struct vmw_resource *res;
enum vmw_ctx_binding_type bt;
+ bool scrubbed;
union {
SVGA3dShaderType shader_type;
SVGA3dRenderTargetType rt_type;
struct drm_open_hash res_ht;
bool res_ht_initialized;
bool kernel; /**< is the called made from the kernel */
- struct ttm_object_file *tfile;
+ struct vmw_fpriv *fp;
struct list_head validate_nodes;
struct vmw_relocation relocs[VMWGFX_MAX_RELOCATIONS];
uint32_t cur_reloc;
bool needs_post_query_barrier;
struct vmw_resource *error_resource;
struct vmw_ctx_binding_state staged_bindings;
+ struct list_head staged_shaders;
};
struct vmw_legacy_display;
extern void vmw_resource_unreference(struct vmw_resource **p_res);
extern struct vmw_resource *vmw_resource_reference(struct vmw_resource *res);
+extern struct vmw_resource *
+vmw_resource_reference_unless_doomed(struct vmw_resource *res);
extern int vmw_resource_validate(struct vmw_resource *res);
extern int vmw_resource_reserve(struct vmw_resource *res, bool no_backup);
extern bool vmw_resource_needs_backup(const struct vmw_resource *res);
vmw_context_binding_state_transfer(struct vmw_resource *res,
struct vmw_ctx_binding_state *cbs);
extern void vmw_context_binding_res_list_kill(struct list_head *head);
+extern void vmw_context_binding_res_list_scrub(struct list_head *head);
+extern int vmw_context_rebind_all(struct vmw_resource *ctx);
+extern struct list_head *vmw_context_binding_list(struct vmw_resource *ctx);
/*
* Surface management - vmwgfx_surface.c
struct drm_file *file_priv);
extern int vmw_shader_destroy_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+extern int vmw_compat_shader_lookup(struct vmw_compat_shader_manager *man,
+ SVGA3dShaderType shader_type,
+ u32 *user_key);
+extern void vmw_compat_shaders_commit(struct vmw_compat_shader_manager *man,
+ struct list_head *list);
+extern void vmw_compat_shaders_revert(struct vmw_compat_shader_manager *man,
+ struct list_head *list);
+extern int vmw_compat_shader_remove(struct vmw_compat_shader_manager *man,
+ u32 user_key,
+ SVGA3dShaderType shader_type,
+ struct list_head *list);
+extern int vmw_compat_shader_add(struct vmw_compat_shader_manager *man,
+ u32 user_key, const void *bytecode,
+ SVGA3dShaderType shader_type,
+ size_t size,
+ struct ttm_object_file *tfile,
+ struct list_head *list);
+extern struct vmw_compat_shader_manager *
+vmw_compat_shader_man_create(struct vmw_private *dev_priv);
+extern void
+vmw_compat_shader_man_destroy(struct vmw_compat_shader_manager *man);
+
/**
* Inline helper functions
* persistent context binding tracker.
*/
if (unlikely(val->staged_bindings)) {
- vmw_context_binding_state_transfer
- (val->res, val->staged_bindings);
+ if (!backoff) {
+ vmw_context_binding_state_transfer
+ (val->res, val->staged_bindings);
+ }
kfree(val->staged_bindings);
val->staged_bindings = NULL;
}
return 0;
}
+/**
+ * vmw_resource_context_res_add - Put resources previously bound to a context on
+ * the validation list
+ *
+ * @dev_priv: Pointer to a device private structure
+ * @sw_context: Pointer to a software context used for this command submission
+ * @ctx: Pointer to the context resource
+ *
+ * This function puts all resources that were previously bound to @ctx on
+ * the resource validation list. This is part of the context state reemission
+ */
+static int vmw_resource_context_res_add(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ struct vmw_resource *ctx)
+{
+ struct list_head *binding_list;
+ struct vmw_ctx_binding *entry;
+ int ret = 0;
+ struct vmw_resource *res;
+
+ mutex_lock(&dev_priv->binding_mutex);
+ binding_list = vmw_context_binding_list(ctx);
+
+ list_for_each_entry(entry, binding_list, ctx_list) {
+ res = vmw_resource_reference_unless_doomed(entry->bi.res);
+ if (unlikely(res == NULL))
+ continue;
+
+ ret = vmw_resource_val_add(sw_context, entry->bi.res, NULL);
+ vmw_resource_unreference(&res);
+ if (unlikely(ret != 0))
+ break;
+ }
+
+ mutex_unlock(&dev_priv->binding_mutex);
+ return ret;
+}
+
/**
* vmw_resource_relocation_add - Add a relocation to the relocation list
*
{
struct vmw_resource_relocation *rel;
- list_for_each_entry(rel, list, head)
- cb[rel->offset] = rel->res->id;
+ list_for_each_entry(rel, list, head) {
+ if (likely(rel->res != NULL))
+ cb[rel->offset] = rel->res->id;
+ else
+ cb[rel->offset] = SVGA_3D_CMD_NOP;
+ }
}
static int vmw_cmd_invalid(struct vmw_private *dev_priv,
}
/**
- * vmw_cmd_res_check - Check that a resource is present and if so, put it
+ * vmw_cmd_compat_res_check - Check that a resource is present and if so, put it
* on the resource validate list unless it's already there.
*
* @dev_priv: Pointer to a device private structure.
* @sw_context: Pointer to the software context.
* @res_type: Resource type.
* @converter: User-space visisble type specific information.
- * @id: Pointer to the location in the command buffer currently being
+ * @id: user-space resource id handle.
+ * @id_loc: Pointer to the location in the command buffer currently being
* parsed from where the user-space resource id handle is located.
+ * @p_val: Pointer to pointer to resource validalidation node. Populated
+ * on exit.
*/
-static int vmw_cmd_res_check(struct vmw_private *dev_priv,
- struct vmw_sw_context *sw_context,
- enum vmw_res_type res_type,
- const struct vmw_user_resource_conv *converter,
- uint32_t *id,
- struct vmw_resource_val_node **p_val)
+static int
+vmw_cmd_compat_res_check(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ enum vmw_res_type res_type,
+ const struct vmw_user_resource_conv *converter,
+ uint32_t id,
+ uint32_t *id_loc,
+ struct vmw_resource_val_node **p_val)
{
struct vmw_res_cache_entry *rcache =
&sw_context->res_cache[res_type];
struct vmw_resource_val_node *node;
int ret;
- if (*id == SVGA3D_INVALID_ID) {
+ if (id == SVGA3D_INVALID_ID) {
if (p_val)
*p_val = NULL;
if (res_type == vmw_res_context) {
* resource
*/
- if (likely(rcache->valid && *id == rcache->handle)) {
+ if (likely(rcache->valid && id == rcache->handle)) {
const struct vmw_resource *res = rcache->res;
rcache->node->first_usage = false;
return vmw_resource_relocation_add
(&sw_context->res_relocations, res,
- id - sw_context->buf_start);
+ id_loc - sw_context->buf_start);
}
ret = vmw_user_resource_lookup_handle(dev_priv,
- sw_context->tfile,
- *id,
+ sw_context->fp->tfile,
+ id,
converter,
&res);
if (unlikely(ret != 0)) {
DRM_ERROR("Could not find or use resource 0x%08x.\n",
- (unsigned) *id);
+ (unsigned) id);
dump_stack();
return ret;
}
rcache->valid = true;
rcache->res = res;
- rcache->handle = *id;
+ rcache->handle = id;
ret = vmw_resource_relocation_add(&sw_context->res_relocations,
res,
- id - sw_context->buf_start);
+ id_loc - sw_context->buf_start);
if (unlikely(ret != 0))
goto out_no_reloc;
if (p_val)
*p_val = node;
- if (node->first_usage && res_type == vmw_res_context) {
+ if (dev_priv->has_mob && node->first_usage &&
+ res_type == vmw_res_context) {
+ ret = vmw_resource_context_res_add(dev_priv, sw_context, res);
+ if (unlikely(ret != 0))
+ goto out_no_reloc;
node->staged_bindings =
kzalloc(sizeof(*node->staged_bindings), GFP_KERNEL);
if (node->staged_bindings == NULL) {
return ret;
}
+/**
+ * vmw_cmd_res_check - Check that a resource is present and if so, put it
+ * on the resource validate list unless it's already there.
+ *
+ * @dev_priv: Pointer to a device private structure.
+ * @sw_context: Pointer to the software context.
+ * @res_type: Resource type.
+ * @converter: User-space visisble type specific information.
+ * @id_loc: Pointer to the location in the command buffer currently being
+ * parsed from where the user-space resource id handle is located.
+ * @p_val: Pointer to pointer to resource validalidation node. Populated
+ * on exit.
+ */
+static int
+vmw_cmd_res_check(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ enum vmw_res_type res_type,
+ const struct vmw_user_resource_conv *converter,
+ uint32_t *id_loc,
+ struct vmw_resource_val_node **p_val)
+{
+ return vmw_cmd_compat_res_check(dev_priv, sw_context, res_type,
+ converter, *id_loc, id_loc, p_val);
+}
+
+/**
+ * vmw_rebind_contexts - Rebind all resources previously bound to
+ * referenced contexts.
+ *
+ * @sw_context: Pointer to the software context.
+ *
+ * Rebind context binding points that have been scrubbed because of eviction.
+ */
+static int vmw_rebind_contexts(struct vmw_sw_context *sw_context)
+{
+ struct vmw_resource_val_node *val;
+ int ret;
+
+ list_for_each_entry(val, &sw_context->resource_list, head) {
+ if (likely(!val->staged_bindings))
+ continue;
+
+ ret = vmw_context_rebind_all(val->res);
+ if (unlikely(ret != 0)) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Failed to rebind context.\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
/**
* vmw_cmd_cid_check - Check a command header for valid context information.
*
struct vmw_relocation *reloc;
int ret;
- ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo);
+ ret = vmw_user_dmabuf_lookup(sw_context->fp->tfile, handle, &vmw_bo);
if (unlikely(ret != 0)) {
DRM_ERROR("Could not find or use MOB buffer.\n");
return -EINVAL;
struct vmw_relocation *reloc;
int ret;
- ret = vmw_user_dmabuf_lookup(sw_context->tfile, handle, &vmw_bo);
+ ret = vmw_user_dmabuf_lookup(sw_context->fp->tfile, handle, &vmw_bo);
if (unlikely(ret != 0)) {
DRM_ERROR("Could not find or use GMR region.\n");
return -EINVAL;
srf = vmw_res_to_srf(sw_context->res_cache[vmw_res_surface].res);
- vmw_kms_cursor_snoop(srf, sw_context->tfile, &vmw_bo->base, header);
+ vmw_kms_cursor_snoop(srf, sw_context->fp->tfile, &vmw_bo->base,
+ header);
out_no_surface:
vmw_dmabuf_unreference(&vmw_bo);
&cmd->body.sid, NULL);
}
+
+/**
+ * vmw_cmd_shader_define - Validate an SVGA_3D_CMD_SHADER_DEFINE
+ * command
+ *
+ * @dev_priv: Pointer to a device private struct.
+ * @sw_context: The software context being used for this batch.
+ * @header: Pointer to the command header in the command stream.
+ */
+static int vmw_cmd_shader_define(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ SVGA3dCmdHeader *header)
+{
+ struct vmw_shader_define_cmd {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdDefineShader body;
+ } *cmd;
+ int ret;
+ size_t size;
+
+ cmd = container_of(header, struct vmw_shader_define_cmd,
+ header);
+
+ ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_context,
+ user_context_converter, &cmd->body.cid,
+ NULL);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (unlikely(!dev_priv->has_mob))
+ return 0;
+
+ size = cmd->header.size - sizeof(cmd->body);
+ ret = vmw_compat_shader_add(sw_context->fp->shman,
+ cmd->body.shid, cmd + 1,
+ cmd->body.type, size,
+ sw_context->fp->tfile,
+ &sw_context->staged_shaders);
+ if (unlikely(ret != 0))
+ return ret;
+
+ return vmw_resource_relocation_add(&sw_context->res_relocations,
+ NULL, &cmd->header.id -
+ sw_context->buf_start);
+
+ return 0;
+}
+
+/**
+ * vmw_cmd_shader_destroy - Validate an SVGA_3D_CMD_SHADER_DESTROY
+ * command
+ *
+ * @dev_priv: Pointer to a device private struct.
+ * @sw_context: The software context being used for this batch.
+ * @header: Pointer to the command header in the command stream.
+ */
+static int vmw_cmd_shader_destroy(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ SVGA3dCmdHeader *header)
+{
+ struct vmw_shader_destroy_cmd {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdDestroyShader body;
+ } *cmd;
+ int ret;
+
+ cmd = container_of(header, struct vmw_shader_destroy_cmd,
+ header);
+
+ ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_context,
+ user_context_converter, &cmd->body.cid,
+ NULL);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (unlikely(!dev_priv->has_mob))
+ return 0;
+
+ ret = vmw_compat_shader_remove(sw_context->fp->shman,
+ cmd->body.shid,
+ cmd->body.type,
+ &sw_context->staged_shaders);
+ if (unlikely(ret != 0))
+ return ret;
+
+ return vmw_resource_relocation_add(&sw_context->res_relocations,
+ NULL, &cmd->header.id -
+ sw_context->buf_start);
+
+ return 0;
+}
+
/**
* vmw_cmd_set_shader - Validate an SVGA_3D_CMD_SET_SHADER
* command
if (dev_priv->has_mob) {
struct vmw_ctx_bindinfo bi;
struct vmw_resource_val_node *res_node;
-
- ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_shader,
- user_shader_converter,
- &cmd->body.shid, &res_node);
+ u32 shid = cmd->body.shid;
+
+ if (shid != SVGA3D_INVALID_ID)
+ (void) vmw_compat_shader_lookup(sw_context->fp->shman,
+ cmd->body.type,
+ &shid);
+
+ ret = vmw_cmd_compat_res_check(dev_priv, sw_context,
+ vmw_res_shader,
+ user_shader_converter,
+ shid,
+ &cmd->body.shid, &res_node);
if (unlikely(ret != 0))
return ret;
return 0;
}
+/**
+ * vmw_cmd_set_shader_const - Validate an SVGA_3D_CMD_SET_SHADER_CONST
+ * command
+ *
+ * @dev_priv: Pointer to a device private struct.
+ * @sw_context: The software context being used for this batch.
+ * @header: Pointer to the command header in the command stream.
+ */
+static int vmw_cmd_set_shader_const(struct vmw_private *dev_priv,
+ struct vmw_sw_context *sw_context,
+ SVGA3dCmdHeader *header)
+{
+ struct vmw_set_shader_const_cmd {
+ SVGA3dCmdHeader header;
+ SVGA3dCmdSetShaderConst body;
+ } *cmd;
+ int ret;
+
+ cmd = container_of(header, struct vmw_set_shader_const_cmd,
+ header);
+
+ ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_context,
+ user_context_converter, &cmd->body.cid,
+ NULL);
+ if (unlikely(ret != 0))
+ return ret;
+
+ if (dev_priv->has_mob)
+ header->id = SVGA_3D_CMD_SET_GB_SHADERCONSTS_INLINE;
+
+ return 0;
+}
+
/**
* vmw_cmd_bind_gb_shader - Validate an SVGA_3D_CMD_BIND_GB_SHADER
* command
true, false, false),
VMW_CMD_DEF(SVGA_3D_CMD_PRESENT, &vmw_cmd_present_check,
false, false, false),
- VMW_CMD_DEF(SVGA_3D_CMD_SHADER_DEFINE, &vmw_cmd_cid_check,
- true, true, false),
- VMW_CMD_DEF(SVGA_3D_CMD_SHADER_DESTROY, &vmw_cmd_cid_check,
- true, true, false),
+ VMW_CMD_DEF(SVGA_3D_CMD_SHADER_DEFINE, &vmw_cmd_shader_define,
+ true, false, false),
+ VMW_CMD_DEF(SVGA_3D_CMD_SHADER_DESTROY, &vmw_cmd_shader_destroy,
+ true, false, false),
VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER, &vmw_cmd_set_shader,
true, false, false),
- VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER_CONST, &vmw_cmd_cid_check,
- true, true, false),
+ VMW_CMD_DEF(SVGA_3D_CMD_SET_SHADER_CONST, &vmw_cmd_set_shader_const,
+ true, false, false),
VMW_CMD_DEF(SVGA_3D_CMD_DRAW_PRIMITIVES, &vmw_cmd_draw,
true, false, false),
VMW_CMD_DEF(SVGA_3D_CMD_SETSCISSORRECT, &vmw_cmd_cid_check,
} else
sw_context->kernel = true;
- sw_context->tfile = vmw_fpriv(file_priv)->tfile;
+ sw_context->fp = vmw_fpriv(file_priv);
sw_context->cur_reloc = 0;
sw_context->cur_val_buf = 0;
sw_context->fence_flags = 0;
goto out_unlock;
sw_context->res_ht_initialized = true;
}
+ INIT_LIST_HEAD(&sw_context->staged_shaders);
INIT_LIST_HEAD(&resource_list);
ret = vmw_cmd_check_all(dev_priv, sw_context, kernel_commands,
command_size);
if (unlikely(ret != 0))
- goto out_err;
+ goto out_err_nores;
ret = vmw_resources_reserve(sw_context);
if (unlikely(ret != 0))
- goto out_err;
+ goto out_err_nores;
ret = ttm_eu_reserve_buffers(&ticket, &sw_context->validate_nodes);
if (unlikely(ret != 0))
goto out_err;
}
+ if (dev_priv->has_mob) {
+ ret = vmw_rebind_contexts(sw_context);
+ if (unlikely(ret != 0))
+ goto out_err;
+ }
+
cmd = vmw_fifo_reserve(dev_priv, command_size);
if (unlikely(cmd == NULL)) {
DRM_ERROR("Failed reserving fifo space for commands.\n");
}
list_splice_init(&sw_context->resource_list, &resource_list);
+ vmw_compat_shaders_commit(sw_context->fp->shman,
+ &sw_context->staged_shaders);
mutex_unlock(&dev_priv->cmdbuf_mutex);
/*
out_unlock_binding:
mutex_unlock(&dev_priv->binding_mutex);
out_err:
- vmw_resource_relocations_free(&sw_context->res_relocations);
- vmw_free_relocations(sw_context);
ttm_eu_backoff_reservation(&ticket, &sw_context->validate_nodes);
+out_err_nores:
vmw_resource_list_unreserve(&sw_context->resource_list, true);
+ vmw_resource_relocations_free(&sw_context->res_relocations);
+ vmw_free_relocations(sw_context);
vmw_clear_validations(sw_context);
if (unlikely(dev_priv->pinned_bo != NULL &&
!dev_priv->query_cid_valid))
list_splice_init(&sw_context->resource_list, &resource_list);
error_resource = sw_context->error_resource;
sw_context->error_resource = NULL;
+ vmw_compat_shaders_revert(sw_context->fp->shman,
+ &sw_context->staged_shaders);
mutex_unlock(&dev_priv->cmdbuf_mutex);
/*
#include <drm/vmwgfx_drm.h>
#include "vmwgfx_kms.h"
+struct svga_3d_compat_cap {
+ SVGA3dCapsRecordHeader header;
+ SVGA3dCapPair pairs[SVGA3D_DEVCAP_MAX];
+};
+
int vmw_getparam_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct vmw_private *dev_priv = vmw_priv(dev);
struct drm_vmw_getparam_arg *param =
(struct drm_vmw_getparam_arg *)data;
+ struct vmw_fpriv *vmw_fp = vmw_fpriv(file_priv);
switch (param->param) {
case DRM_VMW_PARAM_NUM_STREAMS:
__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
const struct vmw_fifo_state *fifo = &dev_priv->fifo;
+ if ((dev_priv->capabilities & SVGA_CAP_GBOBJECTS)) {
+ param->value = SVGA3D_HWVERSION_WS8_B1;
+ break;
+ }
+
param->value =
ioread32(fifo_mem +
((fifo->capabilities &
break;
}
case DRM_VMW_PARAM_MAX_SURF_MEMORY:
- param->value = dev_priv->memory_size;
+ if ((dev_priv->capabilities & SVGA_CAP_GBOBJECTS) &&
+ !vmw_fp->gb_aware)
+ param->value = dev_priv->max_mob_pages * PAGE_SIZE / 2;
+ else
+ param->value = dev_priv->memory_size;
break;
case DRM_VMW_PARAM_3D_CAPS_SIZE:
- if (dev_priv->capabilities & SVGA_CAP_GBOBJECTS)
- param->value = SVGA3D_DEVCAP_MAX;
+ if ((dev_priv->capabilities & SVGA_CAP_GBOBJECTS) &&
+ vmw_fp->gb_aware)
+ param->value = SVGA3D_DEVCAP_MAX * sizeof(uint32_t);
+ else if (dev_priv->capabilities & SVGA_CAP_GBOBJECTS)
+ param->value = sizeof(struct svga_3d_compat_cap) +
+ sizeof(uint32_t);
else
param->value = (SVGA_FIFO_3D_CAPS_LAST -
- SVGA_FIFO_3D_CAPS + 1);
- param->value *= sizeof(uint32_t);
+ SVGA_FIFO_3D_CAPS + 1) *
+ sizeof(uint32_t);
break;
case DRM_VMW_PARAM_MAX_MOB_MEMORY:
+ vmw_fp->gb_aware = true;
param->value = dev_priv->max_mob_pages * PAGE_SIZE;
break;
default:
return 0;
}
+static int vmw_fill_compat_cap(struct vmw_private *dev_priv, void *bounce,
+ size_t size)
+{
+ struct svga_3d_compat_cap *compat_cap =
+ (struct svga_3d_compat_cap *) bounce;
+ unsigned int i;
+ size_t pair_offset = offsetof(struct svga_3d_compat_cap, pairs);
+ unsigned int max_size;
+
+ if (size < pair_offset)
+ return -EINVAL;
+
+ max_size = (size - pair_offset) / sizeof(SVGA3dCapPair);
+
+ if (max_size > SVGA3D_DEVCAP_MAX)
+ max_size = SVGA3D_DEVCAP_MAX;
+
+ compat_cap->header.length =
+ (pair_offset + max_size * sizeof(SVGA3dCapPair)) / sizeof(u32);
+ compat_cap->header.type = SVGA3DCAPS_RECORD_DEVCAPS;
+
+ mutex_lock(&dev_priv->hw_mutex);
+ for (i = 0; i < max_size; ++i) {
+ vmw_write(dev_priv, SVGA_REG_DEV_CAP, i);
+ compat_cap->pairs[i][0] = i;
+ compat_cap->pairs[i][1] = vmw_read(dev_priv, SVGA_REG_DEV_CAP);
+ }
+ mutex_unlock(&dev_priv->hw_mutex);
+
+ return 0;
+}
+
int vmw_get_cap_3d_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
void *bounce;
int ret;
bool gb_objects = !!(dev_priv->capabilities & SVGA_CAP_GBOBJECTS);
+ struct vmw_fpriv *vmw_fp = vmw_fpriv(file_priv);
if (unlikely(arg->pad64 != 0)) {
DRM_ERROR("Illegal GET_3D_CAP argument.\n");
return -EINVAL;
}
- if (gb_objects)
- size = SVGA3D_DEVCAP_MAX;
+ if (gb_objects && vmw_fp->gb_aware)
+ size = SVGA3D_DEVCAP_MAX * sizeof(uint32_t);
+ else if (gb_objects)
+ size = sizeof(struct svga_3d_compat_cap) + sizeof(uint32_t);
else
- size = (SVGA_FIFO_3D_CAPS_LAST - SVGA_FIFO_3D_CAPS + 1);
-
- size *= sizeof(uint32_t);
+ size = (SVGA_FIFO_3D_CAPS_LAST - SVGA_FIFO_3D_CAPS + 1) *
+ sizeof(uint32_t);
if (arg->max_size < size)
size = arg->max_size;
- bounce = vmalloc(size);
+ bounce = vzalloc(size);
if (unlikely(bounce == NULL)) {
DRM_ERROR("Failed to allocate bounce buffer for 3D caps.\n");
return -ENOMEM;
}
- if (gb_objects) {
- int i;
+ if (gb_objects && vmw_fp->gb_aware) {
+ int i, num;
uint32_t *bounce32 = (uint32_t *) bounce;
+ num = size / sizeof(uint32_t);
+ if (num > SVGA3D_DEVCAP_MAX)
+ num = SVGA3D_DEVCAP_MAX;
+
mutex_lock(&dev_priv->hw_mutex);
- for (i = 0; i < SVGA3D_DEVCAP_MAX; ++i) {
+ for (i = 0; i < num; ++i) {
vmw_write(dev_priv, SVGA_REG_DEV_CAP, i);
*bounce32++ = vmw_read(dev_priv, SVGA_REG_DEV_CAP);
}
mutex_unlock(&dev_priv->hw_mutex);
-
+ } else if (gb_objects) {
+ ret = vmw_fill_compat_cap(dev_priv, bounce, size);
+ if (unlikely(ret != 0))
+ goto out_err;
} else {
-
fifo_mem = dev_priv->mmio_virt;
memcpy_fromio(bounce, &fifo_mem[SVGA_FIFO_3D_CAPS], size);
}
ret = copy_to_user(buffer, bounce, size);
if (ret)
ret = -EFAULT;
+out_err:
vfree(bounce);
if (unlikely(ret != 0))
cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
if (unlikely(cmd == NULL)) {
DRM_ERROR("Failed reserving FIFO space for OTable setup.\n");
+ ret = -ENOMEM;
goto out_no_fifo;
}
return res;
}
+struct vmw_resource *
+vmw_resource_reference_unless_doomed(struct vmw_resource *res)
+{
+ return kref_get_unless_zero(&res->kref) ? res : NULL;
+}
/**
* vmw_resource_release_id - release a resource id to the id manager.
vmw_dmabuf_unreference(&res->backup);
}
- if (likely(res->hw_destroy != NULL))
+ if (likely(res->hw_destroy != NULL)) {
res->hw_destroy(res);
+ mutex_lock(&dev_priv->binding_mutex);
+ vmw_context_binding_res_list_kill(&res->binding_head);
+ mutex_unlock(&dev_priv->binding_mutex);
+ }
id = res->id;
if (res->res_free != NULL)
#include "vmwgfx_resource_priv.h"
#include "ttm/ttm_placement.h"
+#define VMW_COMPAT_SHADER_HT_ORDER 12
+
struct vmw_shader {
struct vmw_resource res;
SVGA3dShaderType type;
struct vmw_shader shader;
};
+/**
+ * enum vmw_compat_shader_state - Staging state for compat shaders
+ */
+enum vmw_compat_shader_state {
+ VMW_COMPAT_COMMITED,
+ VMW_COMPAT_ADD,
+ VMW_COMPAT_DEL
+};
+
+/**
+ * struct vmw_compat_shader - Metadata for compat shaders.
+ *
+ * @handle: The TTM handle of the guest backed shader.
+ * @tfile: The struct ttm_object_file the guest backed shader is registered
+ * with.
+ * @hash: Hash item for lookup.
+ * @head: List head for staging lists or the compat shader manager list.
+ * @state: Staging state.
+ *
+ * The structure is protected by the cmdbuf lock.
+ */
+struct vmw_compat_shader {
+ u32 handle;
+ struct ttm_object_file *tfile;
+ struct drm_hash_item hash;
+ struct list_head head;
+ enum vmw_compat_shader_state state;
+};
+
+/**
+ * struct vmw_compat_shader_manager - Compat shader manager.
+ *
+ * @shaders: Hash table containing staged and commited compat shaders
+ * @list: List of commited shaders.
+ * @dev_priv: Pointer to a device private structure.
+ *
+ * @shaders and @list are protected by the cmdbuf mutex for now.
+ */
+struct vmw_compat_shader_manager {
+ struct drm_open_hash shaders;
+ struct list_head list;
+ struct vmw_private *dev_priv;
+};
+
static void vmw_user_shader_free(struct vmw_resource *res);
static struct vmw_resource *
vmw_user_shader_base_to_res(struct ttm_base_object *base);
return 0;
mutex_lock(&dev_priv->binding_mutex);
- vmw_context_binding_res_list_kill(&res->binding_head);
+ vmw_context_binding_res_list_scrub(&res->binding_head);
cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
if (unlikely(cmd == NULL)) {
TTM_REF_USAGE);
}
+int vmw_shader_alloc(struct vmw_private *dev_priv,
+ struct vmw_dma_buffer *buffer,
+ size_t shader_size,
+ size_t offset,
+ SVGA3dShaderType shader_type,
+ struct ttm_object_file *tfile,
+ u32 *handle)
+{
+ struct vmw_user_shader *ushader;
+ struct vmw_resource *res, *tmp;
+ int ret;
+
+ /*
+ * Approximate idr memory usage with 128 bytes. It will be limited
+ * by maximum number_of shaders anyway.
+ */
+ if (unlikely(vmw_user_shader_size == 0))
+ vmw_user_shader_size =
+ ttm_round_pot(sizeof(struct vmw_user_shader)) + 128;
+
+ ret = ttm_mem_global_alloc(vmw_mem_glob(dev_priv),
+ vmw_user_shader_size,
+ false, true);
+ if (unlikely(ret != 0)) {
+ if (ret != -ERESTARTSYS)
+ DRM_ERROR("Out of graphics memory for shader "
+ "creation.\n");
+ goto out;
+ }
+
+ ushader = kzalloc(sizeof(*ushader), GFP_KERNEL);
+ if (unlikely(ushader == NULL)) {
+ ttm_mem_global_free(vmw_mem_glob(dev_priv),
+ vmw_user_shader_size);
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ res = &ushader->shader.res;
+ ushader->base.shareable = false;
+ ushader->base.tfile = NULL;
+
+ /*
+ * From here on, the destructor takes over resource freeing.
+ */
+
+ ret = vmw_gb_shader_init(dev_priv, res, shader_size,
+ offset, shader_type, buffer,
+ vmw_user_shader_free);
+ if (unlikely(ret != 0))
+ goto out;
+
+ tmp = vmw_resource_reference(res);
+ ret = ttm_base_object_init(tfile, &ushader->base, false,
+ VMW_RES_SHADER,
+ &vmw_user_shader_base_release, NULL);
+
+ if (unlikely(ret != 0)) {
+ vmw_resource_unreference(&tmp);
+ goto out_err;
+ }
+
+ if (handle)
+ *handle = ushader->base.hash.key;
+out_err:
+ vmw_resource_unreference(&res);
+out:
+ return ret;
+}
+
+
int vmw_shader_define_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct vmw_private *dev_priv = vmw_priv(dev);
- struct vmw_user_shader *ushader;
- struct vmw_resource *res;
- struct vmw_resource *tmp;
struct drm_vmw_shader_create_arg *arg =
(struct drm_vmw_shader_create_arg *)data;
struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile;
goto out_bad_arg;
}
- /*
- * Approximate idr memory usage with 128 bytes. It will be limited
- * by maximum number_of shaders anyway.
- */
+ ret = ttm_read_lock(&vmaster->lock, true);
+ if (unlikely(ret != 0))
+ goto out_bad_arg;
- if (unlikely(vmw_user_shader_size == 0))
- vmw_user_shader_size = ttm_round_pot(sizeof(*ushader))
- + 128;
+ ret = vmw_shader_alloc(dev_priv, buffer, arg->size, arg->offset,
+ shader_type, tfile, &arg->shader_handle);
- ret = ttm_read_lock(&vmaster->lock, true);
+ ttm_read_unlock(&vmaster->lock);
+out_bad_arg:
+ vmw_dmabuf_unreference(&buffer);
+ return ret;
+}
+
+/**
+ * vmw_compat_shader_lookup - Look up a compat shader
+ *
+ * @man: Pointer to the compat shader manager.
+ * @shader_type: The shader type, that combined with the user_key identifies
+ * the shader.
+ * @user_key: On entry, this should be a pointer to the user_key.
+ * On successful exit, it will contain the guest-backed shader's TTM handle.
+ *
+ * Returns 0 on success. Non-zero on failure, in which case the value pointed
+ * to by @user_key is unmodified.
+ */
+int vmw_compat_shader_lookup(struct vmw_compat_shader_manager *man,
+ SVGA3dShaderType shader_type,
+ u32 *user_key)
+{
+ struct drm_hash_item *hash;
+ int ret;
+ unsigned long key = *user_key | (shader_type << 24);
+
+ ret = drm_ht_find_item(&man->shaders, key, &hash);
if (unlikely(ret != 0))
return ret;
- ret = ttm_mem_global_alloc(vmw_mem_glob(dev_priv),
- vmw_user_shader_size,
- false, true);
- if (unlikely(ret != 0)) {
- if (ret != -ERESTARTSYS)
- DRM_ERROR("Out of graphics memory for shader"
- " creation.\n");
- goto out_unlock;
+ *user_key = drm_hash_entry(hash, struct vmw_compat_shader,
+ hash)->handle;
+
+ return 0;
+}
+
+/**
+ * vmw_compat_shader_free - Free a compat shader.
+ *
+ * @man: Pointer to the compat shader manager.
+ * @entry: Pointer to a struct vmw_compat_shader.
+ *
+ * Frees a struct vmw_compat_shder entry and drops its reference to the
+ * guest backed shader.
+ */
+static void vmw_compat_shader_free(struct vmw_compat_shader_manager *man,
+ struct vmw_compat_shader *entry)
+{
+ list_del(&entry->head);
+ WARN_ON(drm_ht_remove_item(&man->shaders, &entry->hash));
+ WARN_ON(ttm_ref_object_base_unref(entry->tfile, entry->handle,
+ TTM_REF_USAGE));
+ kfree(entry);
+}
+
+/**
+ * vmw_compat_shaders_commit - Commit a list of compat shader actions.
+ *
+ * @man: Pointer to the compat shader manager.
+ * @list: Caller's list of compat shader actions.
+ *
+ * This function commits a list of compat shader additions or removals.
+ * It is typically called when the execbuf ioctl call triggering these
+ * actions has commited the fifo contents to the device.
+ */
+void vmw_compat_shaders_commit(struct vmw_compat_shader_manager *man,
+ struct list_head *list)
+{
+ struct vmw_compat_shader *entry, *next;
+
+ list_for_each_entry_safe(entry, next, list, head) {
+ list_del(&entry->head);
+ switch (entry->state) {
+ case VMW_COMPAT_ADD:
+ entry->state = VMW_COMPAT_COMMITED;
+ list_add_tail(&entry->head, &man->list);
+ break;
+ case VMW_COMPAT_DEL:
+ ttm_ref_object_base_unref(entry->tfile, entry->handle,
+ TTM_REF_USAGE);
+ kfree(entry);
+ break;
+ default:
+ BUG();
+ break;
+ }
}
+}
- ushader = kzalloc(sizeof(*ushader), GFP_KERNEL);
- if (unlikely(ushader == NULL)) {
- ttm_mem_global_free(vmw_mem_glob(dev_priv),
- vmw_user_shader_size);
- ret = -ENOMEM;
- goto out_unlock;
+/**
+ * vmw_compat_shaders_revert - Revert a list of compat shader actions
+ *
+ * @man: Pointer to the compat shader manager.
+ * @list: Caller's list of compat shader actions.
+ *
+ * This function reverts a list of compat shader additions or removals.
+ * It is typically called when the execbuf ioctl call triggering these
+ * actions failed for some reason, and the command stream was never
+ * submitted.
+ */
+void vmw_compat_shaders_revert(struct vmw_compat_shader_manager *man,
+ struct list_head *list)
+{
+ struct vmw_compat_shader *entry, *next;
+ int ret;
+
+ list_for_each_entry_safe(entry, next, list, head) {
+ switch (entry->state) {
+ case VMW_COMPAT_ADD:
+ vmw_compat_shader_free(man, entry);
+ break;
+ case VMW_COMPAT_DEL:
+ ret = drm_ht_insert_item(&man->shaders, &entry->hash);
+ list_del(&entry->head);
+ list_add_tail(&entry->head, &man->list);
+ entry->state = VMW_COMPAT_COMMITED;
+ break;
+ default:
+ BUG();
+ break;
+ }
}
+}
- res = &ushader->shader.res;
- ushader->base.shareable = false;
- ushader->base.tfile = NULL;
+/**
+ * vmw_compat_shader_remove - Stage a compat shader for removal.
+ *
+ * @man: Pointer to the compat shader manager
+ * @user_key: The key that is used to identify the shader. The key is
+ * unique to the shader type.
+ * @shader_type: Shader type.
+ * @list: Caller's list of staged shader actions.
+ *
+ * This function stages a compat shader for removal and removes the key from
+ * the shader manager's hash table. If the shader was previously only staged
+ * for addition it is completely removed (But the execbuf code may keep a
+ * reference if it was bound to a context between addition and removal). If
+ * it was previously commited to the manager, it is staged for removal.
+ */
+int vmw_compat_shader_remove(struct vmw_compat_shader_manager *man,
+ u32 user_key, SVGA3dShaderType shader_type,
+ struct list_head *list)
+{
+ struct vmw_compat_shader *entry;
+ struct drm_hash_item *hash;
+ int ret;
- /*
- * From here on, the destructor takes over resource freeing.
- */
+ ret = drm_ht_find_item(&man->shaders, user_key | (shader_type << 24),
+ &hash);
+ if (likely(ret != 0))
+ return -EINVAL;
- ret = vmw_gb_shader_init(dev_priv, res, arg->size,
- arg->offset, shader_type, buffer,
- vmw_user_shader_free);
+ entry = drm_hash_entry(hash, struct vmw_compat_shader, hash);
+
+ switch (entry->state) {
+ case VMW_COMPAT_ADD:
+ vmw_compat_shader_free(man, entry);
+ break;
+ case VMW_COMPAT_COMMITED:
+ (void) drm_ht_remove_item(&man->shaders, &entry->hash);
+ list_del(&entry->head);
+ entry->state = VMW_COMPAT_DEL;
+ list_add_tail(&entry->head, list);
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * vmw_compat_shader_add - Create a compat shader and add the
+ * key to the manager
+ *
+ * @man: Pointer to the compat shader manager
+ * @user_key: The key that is used to identify the shader. The key is
+ * unique to the shader type.
+ * @bytecode: Pointer to the bytecode of the shader.
+ * @shader_type: Shader type.
+ * @tfile: Pointer to a struct ttm_object_file that the guest-backed shader is
+ * to be created with.
+ * @list: Caller's list of staged shader actions.
+ *
+ * Note that only the key is added to the shader manager's hash table.
+ * The shader is not yet added to the shader manager's list of shaders.
+ */
+int vmw_compat_shader_add(struct vmw_compat_shader_manager *man,
+ u32 user_key, const void *bytecode,
+ SVGA3dShaderType shader_type,
+ size_t size,
+ struct ttm_object_file *tfile,
+ struct list_head *list)
+{
+ struct vmw_dma_buffer *buf;
+ struct ttm_bo_kmap_obj map;
+ bool is_iomem;
+ struct vmw_compat_shader *compat;
+ u32 handle;
+ int ret;
+
+ if (user_key > ((1 << 24) - 1) || (unsigned) shader_type > 16)
+ return -EINVAL;
+
+ /* Allocate and pin a DMA buffer */
+ buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+ if (unlikely(buf == NULL))
+ return -ENOMEM;
+
+ ret = vmw_dmabuf_init(man->dev_priv, buf, size, &vmw_sys_ne_placement,
+ true, vmw_dmabuf_bo_free);
if (unlikely(ret != 0))
- goto out_unlock;
+ goto out;
- tmp = vmw_resource_reference(res);
- ret = ttm_base_object_init(tfile, &ushader->base, false,
- VMW_RES_SHADER,
- &vmw_user_shader_base_release, NULL);
+ ret = ttm_bo_reserve(&buf->base, false, true, false, NULL);
+ if (unlikely(ret != 0))
+ goto no_reserve;
+ /* Map and copy shader bytecode. */
+ ret = ttm_bo_kmap(&buf->base, 0, PAGE_ALIGN(size) >> PAGE_SHIFT,
+ &map);
if (unlikely(ret != 0)) {
- vmw_resource_unreference(&tmp);
- goto out_err;
+ ttm_bo_unreserve(&buf->base);
+ goto no_reserve;
}
- arg->shader_handle = ushader->base.hash.key;
-out_err:
- vmw_resource_unreference(&res);
-out_unlock:
- ttm_read_unlock(&vmaster->lock);
-out_bad_arg:
- vmw_dmabuf_unreference(&buffer);
+ memcpy(ttm_kmap_obj_virtual(&map, &is_iomem), bytecode, size);
+ WARN_ON(is_iomem);
+
+ ttm_bo_kunmap(&map);
+ ret = ttm_bo_validate(&buf->base, &vmw_sys_placement, false, true);
+ WARN_ON(ret != 0);
+ ttm_bo_unreserve(&buf->base);
+
+ /* Create a guest-backed shader container backed by the dma buffer */
+ ret = vmw_shader_alloc(man->dev_priv, buf, size, 0, shader_type,
+ tfile, &handle);
+ vmw_dmabuf_unreference(&buf);
+ if (unlikely(ret != 0))
+ goto no_reserve;
+ /*
+ * Create a compat shader structure and stage it for insertion
+ * in the manager
+ */
+ compat = kzalloc(sizeof(*compat), GFP_KERNEL);
+ if (compat == NULL)
+ goto no_compat;
+
+ compat->hash.key = user_key | (shader_type << 24);
+ ret = drm_ht_insert_item(&man->shaders, &compat->hash);
+ if (unlikely(ret != 0))
+ goto out_invalid_key;
+
+ compat->state = VMW_COMPAT_ADD;
+ compat->handle = handle;
+ compat->tfile = tfile;
+ list_add_tail(&compat->head, list);
+ return 0;
+
+out_invalid_key:
+ kfree(compat);
+no_compat:
+ ttm_ref_object_base_unref(tfile, handle, TTM_REF_USAGE);
+no_reserve:
+out:
return ret;
+}
+
+/**
+ * vmw_compat_shader_man_create - Create a compat shader manager
+ *
+ * @dev_priv: Pointer to a device private structure.
+ *
+ * Typically done at file open time. If successful returns a pointer to a
+ * compat shader manager. Otherwise returns an error pointer.
+ */
+struct vmw_compat_shader_manager *
+vmw_compat_shader_man_create(struct vmw_private *dev_priv)
+{
+ struct vmw_compat_shader_manager *man;
+ int ret;
+
+ man = kzalloc(sizeof(*man), GFP_KERNEL);
+
+ man->dev_priv = dev_priv;
+ INIT_LIST_HEAD(&man->list);
+ ret = drm_ht_create(&man->shaders, VMW_COMPAT_SHADER_HT_ORDER);
+ if (ret == 0)
+ return man;
+
+ kfree(man);
+ return ERR_PTR(ret);
+}
+
+/**
+ * vmw_compat_shader_man_destroy - Destroy a compat shader manager
+ *
+ * @man: Pointer to the shader manager to destroy.
+ *
+ * Typically done at file close time.
+ */
+void vmw_compat_shader_man_destroy(struct vmw_compat_shader_manager *man)
+{
+ struct vmw_compat_shader *entry, *next;
+
+ mutex_lock(&man->dev_priv->cmdbuf_mutex);
+ list_for_each_entry_safe(entry, next, &man->list, head)
+ vmw_compat_shader_free(man, entry);
+ mutex_unlock(&man->dev_priv->cmdbuf_mutex);
+ kfree(man);
}
rep->size_addr;
if (user_sizes)
- ret = copy_to_user(user_sizes, srf->sizes,
- srf->num_sizes * sizeof(*srf->sizes));
+ ret = copy_to_user(user_sizes, &srf->base_size,
+ sizeof(srf->base_size));
if (unlikely(ret != 0)) {
DRM_ERROR("copy_to_user failed %p %u\n",
user_sizes, srf->num_sizes);
return 0;
mutex_lock(&dev_priv->binding_mutex);
- vmw_context_binding_res_list_kill(&res->binding_head);
+ vmw_context_binding_res_list_scrub(&res->binding_head);
cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));
if (unlikely(cmd == NULL)) {
int ret = 0;
struct vmbus_channel_initiate_contact *msg;
unsigned long flags;
- int t;
init_completion(&msginfo->waitevent);
msg->interrupt_page = virt_to_phys(vmbus_connection.int_page);
msg->monitor_page1 = virt_to_phys(vmbus_connection.monitor_pages[0]);
msg->monitor_page2 = virt_to_phys(vmbus_connection.monitor_pages[1]);
+ if (version == VERSION_WIN8)
+ msg->target_vcpu = hv_context.vp_index[smp_processor_id()];
/*
* Add to list before we send the request since we may
}
/* Wait for the connection response */
- t = wait_for_completion_timeout(&msginfo->waitevent, 5*HZ);
- if (t == 0) {
- spin_lock_irqsave(&vmbus_connection.channelmsg_lock,
- flags);
- list_del(&msginfo->msglistentry);
- spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock,
- flags);
- return -ETIMEDOUT;
- }
+ wait_for_completion(&msginfo->waitevent);
spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
list_del(&msginfo->msglistentry);
if (hwmon_irq < 0)
return hwmon_irq;
- hwmon_irq = regmap_irq_get_virq(hwmon->da9055->irq_data, hwmon_irq);
- if (hwmon_irq < 0)
- return hwmon_irq;
-
ret = devm_request_threaded_irq(&pdev->dev, hwmon_irq,
NULL, da9055_auxadc_irq,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
static int ntc_adc_iio_read(struct ntc_thermistor_platform_data *pdata)
{
struct iio_channel *channel = pdata->chan;
- unsigned int result;
+ s64 result;
int val, ret;
ret = iio_read_channel_raw(channel, &val);
}
/* unit: mV */
- result = pdata->pullup_uv * val;
+ result = pdata->pullup_uv * (s64) val;
result >>= 12;
- return result;
+ return (int)result;
}
static const struct of_device_id ntc_match[] = {
u32 flags; /* from platform data */
- int exponent; /* linear mode: exponent for output voltages */
+ int exponent[PMBUS_PAGES];
+ /* linear mode: exponent for output voltages */
const struct pmbus_driver_info *info;
long val;
if (sensor->class == PSC_VOLTAGE_OUT) { /* LINEAR16 */
- exponent = data->exponent;
+ exponent = data->exponent[sensor->page];
mantissa = (u16) sensor->data;
} else { /* LINEAR11 */
exponent = ((s16)sensor->data) >> 11;
#define MIN_MANTISSA (511 * 1000)
static u16 pmbus_data2reg_linear(struct pmbus_data *data,
- enum pmbus_sensor_classes class, long val)
+ struct pmbus_sensor *sensor, long val)
{
s16 exponent = 0, mantissa;
bool negative = false;
if (val == 0)
return 0;
- if (class == PSC_VOLTAGE_OUT) {
+ if (sensor->class == PSC_VOLTAGE_OUT) {
/* LINEAR16 does not support negative voltages */
if (val < 0)
return 0;
* For a static exponents, we don't have a choice
* but to adjust the value to it.
*/
- if (data->exponent < 0)
- val <<= -data->exponent;
+ if (data->exponent[sensor->page] < 0)
+ val <<= -data->exponent[sensor->page];
else
- val >>= data->exponent;
+ val >>= data->exponent[sensor->page];
val = DIV_ROUND_CLOSEST(val, 1000);
return val & 0xffff;
}
}
/* Power is in uW. Convert to mW before converting. */
- if (class == PSC_POWER)
+ if (sensor->class == PSC_POWER)
val = DIV_ROUND_CLOSEST(val, 1000L);
/*
* For simplicity, convert fan data to milli-units
* before calculating the exponent.
*/
- if (class == PSC_FAN)
+ if (sensor->class == PSC_FAN)
val = val * 1000;
/* Reduce large mantissa until it fits into 10 bit */
}
static u16 pmbus_data2reg_direct(struct pmbus_data *data,
- enum pmbus_sensor_classes class, long val)
+ struct pmbus_sensor *sensor, long val)
{
long m, b, R;
- m = data->info->m[class];
- b = data->info->b[class];
- R = data->info->R[class];
+ m = data->info->m[sensor->class];
+ b = data->info->b[sensor->class];
+ R = data->info->R[sensor->class];
/* Power is in uW. Adjust R and b. */
- if (class == PSC_POWER) {
+ if (sensor->class == PSC_POWER) {
R -= 3;
b *= 1000;
}
/* Calculate Y = (m * X + b) * 10^R */
- if (class != PSC_FAN) {
+ if (sensor->class != PSC_FAN) {
R -= 3; /* Adjust R and b for data in milli-units */
b *= 1000;
}
}
static u16 pmbus_data2reg_vid(struct pmbus_data *data,
- enum pmbus_sensor_classes class, long val)
+ struct pmbus_sensor *sensor, long val)
{
val = clamp_val(val, 500, 1600);
}
static u16 pmbus_data2reg(struct pmbus_data *data,
- enum pmbus_sensor_classes class, long val)
+ struct pmbus_sensor *sensor, long val)
{
u16 regval;
- switch (data->info->format[class]) {
+ switch (data->info->format[sensor->class]) {
case direct:
- regval = pmbus_data2reg_direct(data, class, val);
+ regval = pmbus_data2reg_direct(data, sensor, val);
break;
case vid:
- regval = pmbus_data2reg_vid(data, class, val);
+ regval = pmbus_data2reg_vid(data, sensor, val);
break;
case linear:
default:
- regval = pmbus_data2reg_linear(data, class, val);
+ regval = pmbus_data2reg_linear(data, sensor, val);
break;
}
return regval;
return -EINVAL;
mutex_lock(&data->update_lock);
- regval = pmbus_data2reg(data, sensor->class, val);
+ regval = pmbus_data2reg(data, sensor, val);
ret = _pmbus_write_word_data(client, sensor->page, sensor->reg, regval);
if (ret < 0)
rv = ret;
* This function is called for all chips.
*/
static int pmbus_identify_common(struct i2c_client *client,
- struct pmbus_data *data)
+ struct pmbus_data *data, int page)
{
int vout_mode = -1;
- if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE))
- vout_mode = _pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+ if (pmbus_check_byte_register(client, page, PMBUS_VOUT_MODE))
+ vout_mode = _pmbus_read_byte_data(client, page,
+ PMBUS_VOUT_MODE);
if (vout_mode >= 0 && vout_mode != 0xff) {
/*
* Not all chips support the VOUT_MODE command,
if (data->info->format[PSC_VOLTAGE_OUT] != linear)
return -ENODEV;
- data->exponent = ((s8)(vout_mode << 3)) >> 3;
+ data->exponent[page] = ((s8)(vout_mode << 3)) >> 3;
break;
case 1: /* VID mode */
if (data->info->format[PSC_VOLTAGE_OUT] != vid)
}
}
- pmbus_clear_fault_page(client, 0);
+ pmbus_clear_fault_page(client, page);
return 0;
}
struct pmbus_driver_info *info)
{
struct device *dev = &client->dev;
- int ret;
+ int page, ret;
/*
* Some PMBus chips don't support PMBUS_STATUS_BYTE, so try
return -ENODEV;
}
- ret = pmbus_identify_common(client, data);
- if (ret < 0) {
- dev_err(dev, "Failed to identify chip capabilities\n");
- return ret;
+ for (page = 0; page < info->pages; page++) {
+ ret = pmbus_identify_common(client, data, page);
+ if (ret < 0) {
+ dev_err(dev, "Failed to identify chip capabilities\n");
+ return ret;
+ }
}
return 0;
}
enum {
MV64XXX_I2C_ACTION_INVALID,
MV64XXX_I2C_ACTION_CONTINUE,
- MV64XXX_I2C_ACTION_OFFLOAD_SEND_START,
MV64XXX_I2C_ACTION_SEND_START,
MV64XXX_I2C_ACTION_SEND_RESTART,
MV64XXX_I2C_ACTION_OFFLOAD_RESTART,
unsigned long ctrl_reg;
struct i2c_msg *msg = drv_data->msgs;
+ if (!drv_data->offload_enabled)
+ return -EOPNOTSUPP;
+
drv_data->msg = msg;
drv_data->byte_posn = 0;
drv_data->bytes_left = msg->len;
drv_data->msgs++;
drv_data->num_msgs--;
- if (!(drv_data->offload_enabled &&
- mv64xxx_i2c_offload_msg(drv_data))) {
+ if (mv64xxx_i2c_offload_msg(drv_data) < 0) {
drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
writel(drv_data->cntl_bits,
drv_data->reg_base + drv_data->reg_offsets.control);
drv_data->reg_base + drv_data->reg_offsets.control);
break;
- case MV64XXX_I2C_ACTION_OFFLOAD_SEND_START:
- if (!mv64xxx_i2c_offload_msg(drv_data))
- break;
- else
- drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
- /* FALLTHRU */
case MV64XXX_I2C_ACTION_SEND_START:
- writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
- drv_data->reg_base + drv_data->reg_offsets.control);
+ /* Can we offload this msg ? */
+ if (mv64xxx_i2c_offload_msg(drv_data) < 0) {
+ /* No, switch to standard path */
+ mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+ writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
+ drv_data->reg_base + drv_data->reg_offsets.control);
+ }
break;
case MV64XXX_I2C_ACTION_SEND_ADDR_1:
unsigned long flags;
spin_lock_irqsave(&drv_data->lock, flags);
- if (drv_data->offload_enabled) {
- drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_START;
- drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
- } else {
- mv64xxx_i2c_prepare_for_io(drv_data, msg);
- drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
- drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
- }
+ drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+ drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
+
drv_data->send_stop = is_last;
drv_data->block = 1;
mv64xxx_i2c_do_action(drv_data);
{ },
};
-#define BMA180_CHANNEL(_index) { \
+#define BMA180_CHANNEL(_axis) { \
.type = IIO_ACCEL, \
- .indexed = 1, \
- .channel = (_index), \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##_axis, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
- .scan_index = (_index), \
+ .scan_index = AXIS_##_axis, \
.scan_type = { \
.sign = 's', \
.realbits = 14, \
}
static const struct iio_chan_spec bma180_channels[] = {
- BMA180_CHANNEL(AXIS_X),
- BMA180_CHANNEL(AXIS_Y),
- BMA180_CHANNEL(AXIS_Z),
- IIO_CHAN_SOFT_TIMESTAMP(4),
+ BMA180_CHANNEL(X),
+ BMA180_CHANNEL(Y),
+ BMA180_CHANNEL(Z),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
};
static irqreturn_t bma180_trigger_handler(int irq, void *p)
st->client = client;
st->vref_uv = st->chip_info->int_vref_mv * 1000;
- vref = devm_regulator_get(&client->dev, "vref");
+ vref = devm_regulator_get_optional(&client->dev, "vref");
if (!IS_ERR(vref)) {
int vref_uv;
ADIS16300_SCAN_INCLI_X,
ADIS16300_SCAN_INCLI_Y,
ADIS16400_SCAN_ADC,
+ ADIS16400_SCAN_TIMESTAMP,
};
#ifdef CONFIG_IIO_BUFFER
ADIS16400_MAGN_CHAN(Z, ADIS16400_ZMAGN_OUT, 14),
ADIS16400_TEMP_CHAN(ADIS16400_TEMP_OUT, 12),
ADIS16400_AUX_ADC_CHAN(ADIS16400_AUX_ADC, 12),
- IIO_CHAN_SOFT_TIMESTAMP(12)
+ IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
};
static const struct iio_chan_spec adis16448_channels[] = {
},
},
ADIS16400_TEMP_CHAN(ADIS16448_TEMP_OUT, 12),
- IIO_CHAN_SOFT_TIMESTAMP(11)
+ IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
};
static const struct iio_chan_spec adis16350_channels[] = {
ADIS16400_MOD_TEMP_CHAN(X, ADIS16350_XTEMP_OUT, 12),
ADIS16400_MOD_TEMP_CHAN(Y, ADIS16350_YTEMP_OUT, 12),
ADIS16400_MOD_TEMP_CHAN(Z, ADIS16350_ZTEMP_OUT, 12),
- IIO_CHAN_SOFT_TIMESTAMP(11)
+ IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
};
static const struct iio_chan_spec adis16300_channels[] = {
ADIS16400_AUX_ADC_CHAN(ADIS16300_AUX_ADC, 12),
ADIS16400_INCLI_CHAN(X, ADIS16300_PITCH_OUT, 13),
ADIS16400_INCLI_CHAN(Y, ADIS16300_ROLL_OUT, 13),
- IIO_CHAN_SOFT_TIMESTAMP(14)
+ IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
};
static const struct iio_chan_spec adis16334_channels[] = {
ADIS16400_ACCEL_CHAN(Y, ADIS16400_YACCL_OUT, 14),
ADIS16400_ACCEL_CHAN(Z, ADIS16400_ZACCL_OUT, 14),
ADIS16400_TEMP_CHAN(ADIS16350_XTEMP_OUT, 12),
- IIO_CHAN_SOFT_TIMESTAMP(8)
+ IIO_CHAN_SOFT_TIMESTAMP(ADIS16400_SCAN_TIMESTAMP),
};
static struct attribute *adis16400_attributes[] = {
{
struct tsl2563_chip *chip = iio_priv(indio_dev);
- if (chan->channel == IIO_MOD_LIGHT_BOTH)
+ if (mask != IIO_CHAN_INFO_CALIBSCALE)
+ return -EINVAL;
+ if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
chip->calib0 = calib_from_sysfs(val);
- else
+ else if (chan->channel2 == IIO_MOD_LIGHT_IR)
chip->calib1 = calib_from_sysfs(val);
+ else
+ return -EINVAL;
return 0;
}
struct iio_chan_spec const *chan,
int *val,
int *val2,
- long m)
+ long mask)
{
int ret = -EINVAL;
u32 calib0, calib1;
struct tsl2563_chip *chip = iio_priv(indio_dev);
mutex_lock(&chip->lock);
- switch (m) {
+ switch (mask) {
case IIO_CHAN_INFO_RAW:
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
ret = tsl2563_get_adc(chip);
if (ret)
goto error_ret;
- if (chan->channel == 0)
+ if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
*val = chip->data0;
else
*val = chip->data1;
break;
case IIO_CHAN_INFO_CALIBSCALE:
- if (chan->channel == 0)
+ if (chan->channel2 == IIO_MOD_LIGHT_BOTH)
*val = calib_to_sysfs(chip->calib0);
else
*val = calib_to_sysfs(chip->calib1);
#define AK8975_MAX_CONVERSION_TIMEOUT 500
#define AK8975_CONVERSION_DONE_POLL_TIME 10
#define AK8975_DATA_READY_TIMEOUT ((100*HZ)/1000)
+#define RAW_TO_GAUSS(asa) ((((asa) + 128) * 3000) / 256)
/*
* Per-instance context data for the device.
*
* Since 1uT = 0.01 gauss, our final scale factor becomes:
*
- * Hadj = H * ((ASA + 128) / 256) * 3/10 * 100
- * Hadj = H * ((ASA + 128) * 30 / 256
+ * Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100
+ * Hadj = H * ((ASA + 128) * 0.003) / 256
*
* Since ASA doesn't change, we cache the resultant scale factor into the
* device context in ak8975_setup().
*/
- data->raw_to_gauss[0] = ((data->asa[0] + 128) * 30) >> 8;
- data->raw_to_gauss[1] = ((data->asa[1] + 128) * 30) >> 8;
- data->raw_to_gauss[2] = ((data->asa[2] + 128) * 30) >> 8;
+ data->raw_to_gauss[0] = RAW_TO_GAUSS(data->asa[0]);
+ data->raw_to_gauss[1] = RAW_TO_GAUSS(data->asa[1]);
+ data->raw_to_gauss[2] = RAW_TO_GAUSS(data->asa[2]);
return 0;
}
case IIO_CHAN_INFO_RAW:
return ak8975_read_axis(indio_dev, chan->address, val);
case IIO_CHAN_INFO_SCALE:
- *val = data->raw_to_gauss[chan->address];
- return IIO_VAL_INT;
+ *val = 0;
+ *val2 = data->raw_to_gauss[chan->address];
+ return IIO_VAL_INT_PLUS_MICRO;
}
return -EINVAL;
}
while (n-- > 0)
len += scnprintf(buf + len, PAGE_SIZE - len,
- "%d.%d ", vals[n][0], vals[n][1]);
+ "%d.%06d ", vals[n][0], vals[n][1]);
/* replace trailing space by newline */
buf[len - 1] = '\n';
switch (mask) {
case IIO_CHAN_INFO_RAW:
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
switch (chan->type) {
case IIO_MAGN: /* in 0.1 uT / LSB */
ret = mag3110_read(data, buffer);
struct mag3110_data *data = iio_priv(indio_dev);
int rate;
+ if (iio_buffer_enabled(indio_dev))
+ return -EBUSY;
+
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
rate = mag3110_get_samp_freq_index(data, val, val2);
/* Initialize network device */
if ((netdev = c2_devinit(c2dev, mmio_regs)) == NULL) {
+ ret = -ENOMEM;
iounmap(mmio_regs);
goto bail4;
}
goto bail10;
}
- if (c2_register_device(c2dev))
+ ret = c2_register_device(c2dev);
+ if (ret)
goto bail10;
return 0;
goto bail4;
/* Initialize cached the adapter limits */
- if (c2_rnic_query(c2dev, &c2dev->props))
+ err = c2_rnic_query(c2dev, &c2dev->props);
+ if (err)
goto bail5;
/* Initialize the PD pool */
goto free_dst;
}
+ neigh_release(neigh);
step = dev->rdev.lldi.nrxq / dev->rdev.lldi.nchan;
rss_qid = dev->rdev.lldi.rxq_ids[pi->port_id * step];
window = (__force u16) htons((__force u16)tcph->window);
props->active_width = (((u8 *)mailbox->buf)[5] == 0x40) ?
IB_WIDTH_4X : IB_WIDTH_1X;
props->active_speed = IB_SPEED_QDR;
- props->port_cap_flags = IB_PORT_CM_SUP;
+ props->port_cap_flags = IB_PORT_CM_SUP | IB_PORT_IP_BASED_GIDS;
props->gid_tbl_len = mdev->dev->caps.gid_table_len[port];
props->max_msg_sz = mdev->dev->caps.max_msg_sz;
props->pkey_tbl_len = 1;
&dev_attr_board_id
};
+static void mlx4_addrconf_ifid_eui48(u8 *eui, u16 vlan_id,
+ struct net_device *dev)
+{
+ memcpy(eui, dev->dev_addr, 3);
+ memcpy(eui + 5, dev->dev_addr + 3, 3);
+ if (vlan_id < 0x1000) {
+ eui[3] = vlan_id >> 8;
+ eui[4] = vlan_id & 0xff;
+ } else {
+ eui[3] = 0xff;
+ eui[4] = 0xfe;
+ }
+ eui[0] ^= 2;
+}
+
static void update_gids_task(struct work_struct *work)
{
struct update_gid_work *gw = container_of(work, struct update_gid_work, work);
struct mlx4_cmd_mailbox *mailbox;
union ib_gid *gids;
int err;
- int i;
struct mlx4_dev *dev = gw->dev->dev;
mailbox = mlx4_alloc_cmd_mailbox(dev);
gids = mailbox->buf;
memcpy(gids, gw->gids, sizeof(gw->gids));
- for (i = 1; i < gw->dev->num_ports + 1; i++) {
- if (mlx4_ib_port_link_layer(&gw->dev->ib_dev, i) ==
- IB_LINK_LAYER_ETHERNET) {
- err = mlx4_cmd(dev, mailbox->dma,
- MLX4_SET_PORT_GID_TABLE << 8 | i,
- 1, MLX4_CMD_SET_PORT,
- MLX4_CMD_TIME_CLASS_B,
- MLX4_CMD_WRAPPED);
- if (err)
- pr_warn(KERN_WARNING
- "set port %d command failed\n", i);
- }
+ if (mlx4_ib_port_link_layer(&gw->dev->ib_dev, gw->port) ==
+ IB_LINK_LAYER_ETHERNET) {
+ err = mlx4_cmd(dev, mailbox->dma,
+ MLX4_SET_PORT_GID_TABLE << 8 | gw->port,
+ 1, MLX4_CMD_SET_PORT,
+ MLX4_CMD_TIME_CLASS_B,
+ MLX4_CMD_WRAPPED);
+ if (err)
+ pr_warn(KERN_WARNING
+ "set port %d command failed\n", gw->port);
}
mlx4_free_cmd_mailbox(dev, mailbox);
}
static int update_gid_table(struct mlx4_ib_dev *dev, int port,
- union ib_gid *gid, int clear)
+ union ib_gid *gid, int clear,
+ int default_gid)
{
struct update_gid_work *work;
int i;
int found = -1;
int max_gids;
- max_gids = dev->dev->caps.gid_table_len[port];
- for (i = 0; i < max_gids; ++i) {
- if (!memcmp(&dev->iboe.gid_table[port - 1][i], gid,
- sizeof(*gid)))
- found = i;
-
- if (clear) {
- if (found >= 0) {
- need_update = 1;
- dev->iboe.gid_table[port - 1][found] = zgid;
- break;
- }
- } else {
- if (found >= 0)
- break;
-
- if (free < 0 &&
- !memcmp(&dev->iboe.gid_table[port - 1][i], &zgid,
+ if (default_gid) {
+ free = 0;
+ } else {
+ max_gids = dev->dev->caps.gid_table_len[port];
+ for (i = 1; i < max_gids; ++i) {
+ if (!memcmp(&dev->iboe.gid_table[port - 1][i], gid,
sizeof(*gid)))
- free = i;
+ found = i;
+
+ if (clear) {
+ if (found >= 0) {
+ need_update = 1;
+ dev->iboe.gid_table[port - 1][found] =
+ zgid;
+ break;
+ }
+ } else {
+ if (found >= 0)
+ break;
+
+ if (free < 0 &&
+ !memcmp(&dev->iboe.gid_table[port - 1][i],
+ &zgid, sizeof(*gid)))
+ free = i;
+ }
}
}
return 0;
}
-static int reset_gid_table(struct mlx4_ib_dev *dev)
+static void mlx4_make_default_gid(struct net_device *dev, union ib_gid *gid)
{
- struct update_gid_work *work;
+ gid->global.subnet_prefix = cpu_to_be64(0xfe80000000000000LL);
+ mlx4_addrconf_ifid_eui48(&gid->raw[8], 0xffff, dev);
+}
+
+static int reset_gid_table(struct mlx4_ib_dev *dev, u8 port)
+{
+ struct update_gid_work *work;
work = kzalloc(sizeof(*work), GFP_ATOMIC);
if (!work)
return -ENOMEM;
- memset(dev->iboe.gid_table, 0, sizeof(dev->iboe.gid_table));
+
+ memset(dev->iboe.gid_table[port - 1], 0, sizeof(work->gids));
memset(work->gids, 0, sizeof(work->gids));
INIT_WORK(&work->work, reset_gids_task);
work->dev = dev;
+ work->port = port;
queue_work(wq, &work->work);
return 0;
}
struct net_device *real_dev = rdma_vlan_dev_real_dev(event_netdev) ?
rdma_vlan_dev_real_dev(event_netdev) :
event_netdev;
+ union ib_gid default_gid;
+
+ mlx4_make_default_gid(real_dev, &default_gid);
+
+ if (!memcmp(gid, &default_gid, sizeof(*gid)))
+ return 0;
if (event != NETDEV_DOWN && event != NETDEV_UP)
return 0;
(!netif_is_bond_master(real_dev) &&
(real_dev == iboe->netdevs[port - 1])))
update_gid_table(ibdev, port, gid,
- event == NETDEV_DOWN);
+ event == NETDEV_DOWN, 0);
spin_unlock(&iboe->lock);
return 0;
rdma_vlan_dev_real_dev(dev) : dev;
iboe = &ibdev->iboe;
- spin_lock(&iboe->lock);
for (port = 1; port <= MLX4_MAX_PORTS; ++port)
if ((netif_is_bond_master(real_dev) &&
(real_dev == iboe->netdevs[port - 1])))
break;
- spin_unlock(&iboe->lock);
-
if ((port == 0) || (port > MLX4_MAX_PORTS))
return 0;
else
/*ifa->ifa_address;*/
ipv6_addr_set_v4mapped(ifa->ifa_address,
(struct in6_addr *)&gid);
- update_gid_table(ibdev, port, &gid, 0);
+ update_gid_table(ibdev, port, &gid, 0, 0);
}
endfor_ifa(in_dev);
in_dev_put(in_dev);
read_lock_bh(&in6_dev->lock);
list_for_each_entry(ifp, &in6_dev->addr_list, if_list) {
pgid = (union ib_gid *)&ifp->addr;
- update_gid_table(ibdev, port, pgid, 0);
+ update_gid_table(ibdev, port, pgid, 0, 0);
}
read_unlock_bh(&in6_dev->lock);
in6_dev_put(in6_dev);
#endif
}
+static void mlx4_ib_set_default_gid(struct mlx4_ib_dev *ibdev,
+ struct net_device *dev, u8 port)
+{
+ union ib_gid gid;
+ mlx4_make_default_gid(dev, &gid);
+ update_gid_table(ibdev, port, &gid, 0, 1);
+}
+
static int mlx4_ib_init_gid_table(struct mlx4_ib_dev *ibdev)
{
struct net_device *dev;
+ struct mlx4_ib_iboe *iboe = &ibdev->iboe;
+ int i;
- if (reset_gid_table(ibdev))
- return -1;
+ for (i = 1; i <= ibdev->num_ports; ++i)
+ if (reset_gid_table(ibdev, i))
+ return -1;
read_lock(&dev_base_lock);
+ spin_lock(&iboe->lock);
for_each_netdev(&init_net, dev) {
u8 port = mlx4_ib_get_dev_port(dev, ibdev);
mlx4_ib_get_dev_addr(dev, ibdev, port);
}
+ spin_unlock(&iboe->lock);
read_unlock(&dev_base_lock);
return 0;
spin_lock(&iboe->lock);
mlx4_foreach_ib_transport_port(port, ibdev->dev) {
+ enum ib_port_state port_state = IB_PORT_NOP;
struct net_device *old_master = iboe->masters[port - 1];
+ struct net_device *curr_netdev;
struct net_device *curr_master;
+
iboe->netdevs[port - 1] =
mlx4_get_protocol_dev(ibdev->dev, MLX4_PROT_ETH, port);
+ if (iboe->netdevs[port - 1])
+ mlx4_ib_set_default_gid(ibdev,
+ iboe->netdevs[port - 1], port);
+ curr_netdev = iboe->netdevs[port - 1];
if (iboe->netdevs[port - 1] &&
netif_is_bond_slave(iboe->netdevs[port - 1])) {
- rtnl_lock();
iboe->masters[port - 1] = netdev_master_upper_dev_get(
iboe->netdevs[port - 1]);
- rtnl_unlock();
+ } else {
+ iboe->masters[port - 1] = NULL;
}
curr_master = iboe->masters[port - 1];
+ if (curr_netdev) {
+ port_state = (netif_running(curr_netdev) && netif_carrier_ok(curr_netdev)) ?
+ IB_PORT_ACTIVE : IB_PORT_DOWN;
+ mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
+ } else {
+ reset_gid_table(ibdev, port);
+ }
+ /* if using bonding/team and a slave port is down, we don't the bond IP
+ * based gids in the table since flows that select port by gid may get
+ * the down port.
+ */
+ if (curr_master && (port_state == IB_PORT_DOWN)) {
+ reset_gid_table(ibdev, port);
+ mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
+ }
/* if bonding is used it is possible that we add it to masters
- only after IP address is assigned to the net bonding
- interface */
- if (curr_master && (old_master != curr_master))
+ * only after IP address is assigned to the net bonding
+ * interface.
+ */
+ if (curr_master && (old_master != curr_master)) {
+ reset_gid_table(ibdev, port);
+ mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
mlx4_ib_get_dev_addr(curr_master, ibdev, port);
+ }
+
+ if (!curr_master && (old_master != curr_master)) {
+ reset_gid_table(ibdev, port);
+ mlx4_ib_set_default_gid(ibdev, curr_netdev, port);
+ mlx4_ib_get_dev_addr(curr_netdev, ibdev, port);
+ }
}
spin_unlock(&iboe->lock);
int i, j;
int err;
struct mlx4_ib_iboe *iboe;
+ int ib_num_ports = 0;
pr_info_once("%s", mlx4_ib_version);
ibdev->counters[i] = -1;
}
+ mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB)
+ ib_num_ports++;
+
spin_lock_init(&ibdev->sm_lock);
mutex_init(&ibdev->cap_mask_mutex);
- if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED) {
+ if (ibdev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED &&
+ ib_num_ports) {
ibdev->steer_qpn_count = MLX4_IB_UC_MAX_NUM_QPS;
err = mlx4_qp_reserve_range(dev, ibdev->steer_qpn_count,
MLX4_IB_UC_STEER_QPN_ALIGN,
}
}
#endif
+ for (i = 1 ; i <= ibdev->num_ports ; ++i)
+ reset_gid_table(ibdev, i);
+ rtnl_lock();
mlx4_ib_scan_netdevs(ibdev);
+ rtnl_unlock();
mlx4_ib_init_gid_table(ibdev);
}
config MLX5_INFINIBAND
tristate "Mellanox Connect-IB HCA support"
- depends on NETDEVICES && ETHERNET && PCI && X86
+ depends on NETDEVICES && ETHERNET && PCI
select NET_VENDOR_MELLANOX
select MLX5_CORE
---help---
props->device_cap_flags = IB_DEVICE_CHANGE_PHY_PORT |
IB_DEVICE_PORT_ACTIVE_EVENT |
IB_DEVICE_SYS_IMAGE_GUID |
- IB_DEVICE_RC_RNR_NAK_GEN |
- IB_DEVICE_BLOCK_MULTICAST_LOOPBACK;
+ IB_DEVICE_RC_RNR_NAK_GEN;
flags = dev->mdev.caps.flags;
if (flags & MLX5_DEV_CAP_FLAG_BAD_PKEY_CNTR)
props->device_cap_flags |= IB_DEVICE_BAD_PKEY_CNTR;
struct ib_udata *udata)
{
struct mlx5_ib_dev *dev = to_mdev(ibdev);
- struct mlx5_ib_alloc_ucontext_req req;
+ struct mlx5_ib_alloc_ucontext_req_v2 req;
struct mlx5_ib_alloc_ucontext_resp resp;
struct mlx5_ib_ucontext *context;
struct mlx5_uuar_info *uuari;
struct mlx5_uar *uars;
int gross_uuars;
int num_uars;
+ int ver;
int uuarn;
int err;
int i;
+ int reqlen;
if (!dev->ib_active)
return ERR_PTR(-EAGAIN);
- err = ib_copy_from_udata(&req, udata, sizeof(req));
+ memset(&req, 0, sizeof(req));
+ reqlen = udata->inlen - sizeof(struct ib_uverbs_cmd_hdr);
+ if (reqlen == sizeof(struct mlx5_ib_alloc_ucontext_req))
+ ver = 0;
+ else if (reqlen == sizeof(struct mlx5_ib_alloc_ucontext_req_v2))
+ ver = 2;
+ else
+ return ERR_PTR(-EINVAL);
+
+ err = ib_copy_from_udata(&req, udata, reqlen);
if (err)
return ERR_PTR(err);
+ if (req.flags || req.reserved)
+ return ERR_PTR(-EINVAL);
+
if (req.total_num_uuars > MLX5_MAX_UUARS)
return ERR_PTR(-ENOMEM);
if (err)
goto out_uars;
+ uuari->ver = ver;
uuari->num_low_latency_uuars = req.num_low_latency_uuars;
uuari->uars = uars;
uuari->num_uars = num_uars;
case IB_QPT_UC:
size += sizeof(struct mlx5_wqe_ctrl_seg) +
- sizeof(struct mlx5_wqe_raddr_seg);
+ sizeof(struct mlx5_wqe_raddr_seg) +
+ sizeof(struct mlx5_wqe_umr_ctrl_seg) +
+ sizeof(struct mlx5_mkey_seg);
break;
case IB_QPT_UD:
break;
case MLX5_IB_LATENCY_CLASS_MEDIUM:
- uuarn = alloc_med_class_uuar(uuari);
+ if (uuari->ver < 2)
+ uuarn = -ENOMEM;
+ else
+ uuarn = alloc_med_class_uuar(uuari);
break;
case MLX5_IB_LATENCY_CLASS_HIGH:
- uuarn = alloc_high_class_uuar(uuari);
+ if (uuari->ver < 2)
+ uuarn = -ENOMEM;
+ else
+ uuarn = alloc_high_class_uuar(uuari);
break;
case MLX5_IB_LATENCY_CLASS_FAST_PATH:
int err;
uuari = &dev->mdev.priv.uuari;
- if (init_attr->create_flags & IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK)
- qp->flags |= MLX5_IB_QP_BLOCK_MULTICAST_LOOPBACK;
+ if (init_attr->create_flags)
+ return -EINVAL;
if (init_attr->qp_type == MLX5_IB_QPT_REG_UMR)
lc = MLX5_IB_LATENCY_CLASS_FAST_PATH;
__u32 num_low_latency_uuars;
};
+struct mlx5_ib_alloc_ucontext_req_v2 {
+ __u32 total_num_uuars;
+ __u32 num_low_latency_uuars;
+ __u32 flags;
+ __u32 reserved;
+};
+
struct mlx5_ib_alloc_ucontext_resp {
__u32 qp_tab_size;
__u32 bf_reg_size;
INIT_DELAYED_WORK(&nesdev->work, nes_recheck_link_status);
/* Initialize network devices */
- if ((netdev = nes_netdev_init(nesdev, mmio_regs)) == NULL)
+ netdev = nes_netdev_init(nesdev, mmio_regs);
+ if (netdev == NULL) {
+ ret = -ENOMEM;
goto bail7;
+ }
/* Register network device */
ret = register_netdev(netdev);
is_vlan = netdev->priv_flags & IFF_802_1Q_VLAN;
if (is_vlan)
- netdev = vlan_dev_real_dev(netdev);
+ netdev = rdma_vlan_dev_real_dev(netdev);
rcu_read_lock();
list_for_each_entry_rcu(dev, &ocrdma_dev_list, entry) {
props->port_cap_flags =
IB_PORT_CM_SUP |
IB_PORT_REINIT_SUP |
- IB_PORT_DEVICE_MGMT_SUP | IB_PORT_VENDOR_CLASS_SUP;
+ IB_PORT_DEVICE_MGMT_SUP | IB_PORT_VENDOR_CLASS_SUP | IB_PORT_IP_BASED_GIDS;
props->gid_tbl_len = OCRDMA_MAX_SGID;
props->pkey_tbl_len = 1;
props->bad_pkey_cntr = 0;
OCRDMA_QP_PARAMS_HOP_LMT_MASK) >>
OCRDMA_QP_PARAMS_HOP_LMT_SHIFT;
qp_attr->ah_attr.grh.traffic_class = (params.tclass_sq_psn &
- OCRDMA_QP_PARAMS_SQ_PSN_MASK) >>
+ OCRDMA_QP_PARAMS_TCLASS_MASK) >>
OCRDMA_QP_PARAMS_TCLASS_SHIFT;
qp_attr->ah_attr.ah_flags = IB_AH_GRH;
qib_write_kreg_port(ppd, krp_ibcctrl_a, ppd->cpspec->ibcctrl_a);
qib_write_kreg(dd, kr_scratch, 0ULL);
+ /* ensure previous Tx parameters are not still forced */
+ qib_write_kreg_port(ppd, krp_tx_deemph_override,
+ SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0,
+ reset_tx_deemphasis_override));
+
if (qib_compat_ddr_negotiate) {
ppd->cpspec->ibdeltainprog = 1;
ppd->cpspec->ibsymsnap = read_7322_creg32_port(ppd,
{
enum usnic_transport_type trans_type = qp_flow->trans_type;
int err;
+ uint16_t port_num = 0;
switch (trans_type) {
case USNIC_TRANSPORT_ROCE_CUSTOM:
case USNIC_TRANSPORT_IPV4_UDP:
err = usnic_transport_sock_get_addr(qp_flow->udp.sock,
NULL, NULL,
- (uint16_t *) id);
+ &port_num);
if (err)
return err;
+ /*
+ * Copy port_num to stack first and then to *id,
+ * so that the short to int cast works for little
+ * and big endian systems.
+ */
+ *id = port_num;
break;
default:
usnic_err("Unsupported transport %u\n", trans_type);
ib_dma_unmap_single(device->ib_device, tx_desc->dma_addr,
ISER_HEADERS_LEN, DMA_TO_DEVICE);
kmem_cache_free(ig.desc_cache, tx_desc);
+ tx_desc = NULL;
}
atomic_dec(&ib_conn->post_send_buf_count);
- if (tx_desc->type == ISCSI_TX_CONTROL) {
+ if (tx_desc && tx_desc->type == ISCSI_TX_CONTROL) {
/* this arithmetic is legal by libiscsi dd_data allocation */
task = (void *) ((long)(void *)tx_desc -
sizeof(struct iscsi_task));
/* getting here when the state is UP means that the conn is being *
* terminated asynchronously from the iSCSI layer's perspective. */
if (iser_conn_state_comp_exch(ib_conn, ISER_CONN_UP,
- ISER_CONN_TERMINATING))
- iscsi_conn_failure(ib_conn->iser_conn->iscsi_conn,
- ISCSI_ERR_CONN_FAILED);
+ ISER_CONN_TERMINATING)){
+ if (ib_conn->iser_conn)
+ iscsi_conn_failure(ib_conn->iser_conn->iscsi_conn,
+ ISCSI_ERR_CONN_FAILED);
+ else
+ iser_err("iscsi_iser connection isn't bound\n");
+ }
/* Complete the termination process if no posts are pending */
if (ib_conn->post_recv_buf_count == 0 &&
if (ret) {
pr_err("Failed to create fastreg descriptor err=%d\n",
ret);
+ kfree(fr_desc);
goto err;
}
unsigned long val;
int ret;
- ret = strict_strtoul(page, 0, &val);
+ ret = kstrtoul(page, 0, &val);
if (ret < 0) {
- pr_err("strict_strtoul() failed with ret: %d\n", ret);
+ pr_err("kstrtoul() failed with ret: %d\n", ret);
return -EINVAL;
}
if (val > MAX_SRPT_RDMA_SIZE) {
unsigned long val;
int ret;
- ret = strict_strtoul(page, 0, &val);
+ ret = kstrtoul(page, 0, &val);
if (ret < 0) {
- pr_err("strict_strtoul() failed with ret: %d\n", ret);
+ pr_err("kstrtoul() failed with ret: %d\n", ret);
return -EINVAL;
}
if (val > MAX_SRPT_RSP_SIZE) {
unsigned long val;
int ret;
- ret = strict_strtoul(page, 0, &val);
+ ret = kstrtoul(page, 0, &val);
if (ret < 0) {
- pr_err("strict_strtoul() failed with ret: %d\n", ret);
+ pr_err("kstrtoul() failed with ret: %d\n", ret);
return -EINVAL;
}
if (val > MAX_SRPT_SRQ_SIZE) {
unsigned long tmp;
int ret;
- ret = strict_strtoul(page, 0, &tmp);
+ ret = kstrtoul(page, 0, &tmp);
if (ret < 0) {
printk(KERN_ERR "Unable to extract srpt_tpg_store_enable\n");
return -EINVAL;
config XTENSA_MX
bool
select IRQ_DOMAIN
+
+config IRQ_CROSSBAR
+ bool
+ help
+ Support for a CROSSBAR ip that preceeds the main interrupt controller.
+ The primary irqchip invokes the crossbar's callback which inturn allocates
+ a free irq and configures the IP. Thus the peripheral interrupts are
+ routed to one of the free irqchip interrupt lines.
obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
+obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o
obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o
obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
+obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
& PCI_MSI_DOORBELL_MASK;
- writel(~PCI_MSI_DOORBELL_MASK, per_cpu_int_base +
+ writel(~msimask, per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
for (msinr = PCI_MSI_DOORBELL_START;
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS)
& IPI_DOORBELL_MASK;
- writel(~IPI_DOORBELL_MASK, per_cpu_int_base +
+ writel(~ipimask, per_cpu_int_base +
ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS);
/* Handle all pending doorbells */
--- /dev/null
+/*
+ * drivers/irqchip/irq-crossbar.c
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Sricharan R <r.sricharan@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/slab.h>
+#include <linux/irqchip/arm-gic.h>
+
+#define IRQ_FREE -1
+#define GIC_IRQ_START 32
+
+/*
+ * @int_max: maximum number of supported interrupts
+ * @irq_map: array of interrupts to crossbar number mapping
+ * @crossbar_base: crossbar base address
+ * @register_offsets: offsets for each irq number
+ */
+struct crossbar_device {
+ uint int_max;
+ uint *irq_map;
+ void __iomem *crossbar_base;
+ int *register_offsets;
+ void (*write) (int, int);
+};
+
+static struct crossbar_device *cb;
+
+static inline void crossbar_writel(int irq_no, int cb_no)
+{
+ writel(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
+}
+
+static inline void crossbar_writew(int irq_no, int cb_no)
+{
+ writew(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
+}
+
+static inline void crossbar_writeb(int irq_no, int cb_no)
+{
+ writeb(cb_no, cb->crossbar_base + cb->register_offsets[irq_no]);
+}
+
+static inline int allocate_free_irq(int cb_no)
+{
+ int i;
+
+ for (i = 0; i < cb->int_max; i++) {
+ if (cb->irq_map[i] == IRQ_FREE) {
+ cb->irq_map[i] = cb_no;
+ return i;
+ }
+ }
+
+ return -ENODEV;
+}
+
+static int crossbar_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ cb->write(hw - GIC_IRQ_START, cb->irq_map[hw - GIC_IRQ_START]);
+ return 0;
+}
+
+static void crossbar_domain_unmap(struct irq_domain *d, unsigned int irq)
+{
+ irq_hw_number_t hw = irq_get_irq_data(irq)->hwirq;
+
+ if (hw > GIC_IRQ_START)
+ cb->irq_map[hw - GIC_IRQ_START] = IRQ_FREE;
+}
+
+static int crossbar_domain_xlate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ unsigned long ret;
+
+ ret = allocate_free_irq(intspec[1]);
+
+ if (IS_ERR_VALUE(ret))
+ return ret;
+
+ *out_hwirq = ret + GIC_IRQ_START;
+ return 0;
+}
+
+const struct irq_domain_ops routable_irq_domain_ops = {
+ .map = crossbar_domain_map,
+ .unmap = crossbar_domain_unmap,
+ .xlate = crossbar_domain_xlate
+};
+
+static int __init crossbar_of_init(struct device_node *node)
+{
+ int i, size, max, reserved = 0, entry;
+ const __be32 *irqsr;
+
+ cb = kzalloc(sizeof(struct cb_device *), GFP_KERNEL);
+
+ if (!cb)
+ return -ENOMEM;
+
+ cb->crossbar_base = of_iomap(node, 0);
+ if (!cb->crossbar_base)
+ goto err1;
+
+ of_property_read_u32(node, "ti,max-irqs", &max);
+ cb->irq_map = kzalloc(max * sizeof(int), GFP_KERNEL);
+ if (!cb->irq_map)
+ goto err2;
+
+ cb->int_max = max;
+
+ for (i = 0; i < max; i++)
+ cb->irq_map[i] = IRQ_FREE;
+
+ /* Get and mark reserved irqs */
+ irqsr = of_get_property(node, "ti,irqs-reserved", &size);
+ if (irqsr) {
+ size /= sizeof(__be32);
+
+ for (i = 0; i < size; i++) {
+ of_property_read_u32_index(node,
+ "ti,irqs-reserved",
+ i, &entry);
+ if (entry > max) {
+ pr_err("Invalid reserved entry\n");
+ goto err3;
+ }
+ cb->irq_map[entry] = 0;
+ }
+ }
+
+ cb->register_offsets = kzalloc(max * sizeof(int), GFP_KERNEL);
+ if (!cb->register_offsets)
+ goto err3;
+
+ of_property_read_u32(node, "ti,reg-size", &size);
+
+ switch (size) {
+ case 1:
+ cb->write = crossbar_writeb;
+ break;
+ case 2:
+ cb->write = crossbar_writew;
+ break;
+ case 4:
+ cb->write = crossbar_writel;
+ break;
+ default:
+ pr_err("Invalid reg-size property\n");
+ goto err4;
+ break;
+ }
+
+ /*
+ * Register offsets are not linear because of the
+ * reserved irqs. so find and store the offsets once.
+ */
+ for (i = 0; i < max; i++) {
+ if (!cb->irq_map[i])
+ continue;
+
+ cb->register_offsets[i] = reserved;
+ reserved += size;
+ }
+
+ register_routable_domain_ops(&routable_irq_domain_ops);
+ return 0;
+
+err4:
+ kfree(cb->register_offsets);
+err3:
+ kfree(cb->irq_map);
+err2:
+ iounmap(cb->crossbar_base);
+err1:
+ kfree(cb);
+ return -ENOMEM;
+}
+
+static const struct of_device_id crossbar_match[] __initconst = {
+ { .compatible = "ti,irq-crossbar" },
+ {}
+};
+
+int __init irqcrossbar_init(void)
+{
+ struct device_node *np;
+ np = of_find_matching_node(NULL, crossbar_match);
+ if (!np)
+ return -ENODEV;
+
+ crossbar_of_init(np);
+ return 0;
+}
irq_set_chip_and_handler(irq, &gic_chip,
handle_fasteoi_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+ gic_routable_irq_domain_ops->map(d, irq, hw);
}
irq_set_chip_data(irq, d->host_data);
return 0;
}
+static void gic_irq_domain_unmap(struct irq_domain *d, unsigned int irq)
+{
+ gic_routable_irq_domain_ops->unmap(d, irq);
+}
+
static int gic_irq_domain_xlate(struct irq_domain *d,
struct device_node *controller,
const u32 *intspec, unsigned int intsize,
unsigned long *out_hwirq, unsigned int *out_type)
{
+ unsigned long ret = 0;
+
if (d->of_node != controller)
return -EINVAL;
if (intsize < 3)
*out_hwirq = intspec[1] + 16;
/* For SPIs, we need to add 16 more to get the GIC irq ID number */
- if (!intspec[0])
- *out_hwirq += 16;
+ if (!intspec[0]) {
+ ret = gic_routable_irq_domain_ops->xlate(d, controller,
+ intspec,
+ intsize,
+ out_hwirq,
+ out_type);
+
+ if (IS_ERR_VALUE(ret))
+ return ret;
+ }
*out_type = intspec[2] & IRQ_TYPE_SENSE_MASK;
- return 0;
+
+ return ret;
}
#ifdef CONFIG_SMP
const struct irq_domain_ops gic_irq_domain_ops = {
.map = gic_irq_domain_map,
+ .unmap = gic_irq_domain_unmap,
.xlate = gic_irq_domain_xlate,
};
+/* Default functions for routable irq domain */
+static int gic_routable_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hw)
+{
+ return 0;
+}
+
+static void gic_routable_irq_domain_unmap(struct irq_domain *d,
+ unsigned int irq)
+{
+}
+
+static int gic_routable_irq_domain_xlate(struct irq_domain *d,
+ struct device_node *controller,
+ const u32 *intspec, unsigned int intsize,
+ unsigned long *out_hwirq,
+ unsigned int *out_type)
+{
+ *out_hwirq += 16;
+ return 0;
+}
+
+const struct irq_domain_ops gic_default_routable_irq_domain_ops = {
+ .map = gic_routable_irq_domain_map,
+ .unmap = gic_routable_irq_domain_unmap,
+ .xlate = gic_routable_irq_domain_xlate,
+};
+
+const struct irq_domain_ops *gic_routable_irq_domain_ops =
+ &gic_default_routable_irq_domain_ops;
+
void __init gic_init_bases(unsigned int gic_nr, int irq_start,
void __iomem *dist_base, void __iomem *cpu_base,
u32 percpu_offset, struct device_node *node)
irq_hw_number_t hwirq_base;
struct gic_chip_data *gic;
int gic_irqs, irq_base, i;
+ int nr_routable_irqs;
BUG_ON(gic_nr >= MAX_GIC_NR);
gic->gic_irqs = gic_irqs;
gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */
- irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id());
- if (IS_ERR_VALUE(irq_base)) {
- WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
- irq_start);
- irq_base = irq_start;
+
+ if (of_property_read_u32(node, "arm,routable-irqs",
+ &nr_routable_irqs)) {
+ irq_base = irq_alloc_descs(irq_start, 16, gic_irqs,
+ numa_node_id());
+ if (IS_ERR_VALUE(irq_base)) {
+ WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
+ irq_start);
+ irq_base = irq_start;
+ }
+
+ gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
+ hwirq_base, &gic_irq_domain_ops, gic);
+ } else {
+ gic->domain = irq_domain_add_linear(node, nr_routable_irqs,
+ &gic_irq_domain_ops,
+ gic);
}
- gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base,
- hwirq_base, &gic_irq_domain_ops, gic);
+
if (WARN_ON(!gic->domain))
return;
static void orion_bridge_irq_handler(unsigned int irq, struct irq_desc *desc)
{
struct irq_domain *d = irq_get_handler_data(irq);
- struct irq_chip_generic *gc = irq_get_domain_generic_chip(d, irq);
+
+ struct irq_chip_generic *gc = irq_get_domain_generic_chip(d, 0);
u32 stat = readl_relaxed(gc->reg_base + ORION_BRIDGE_IRQ_CAUSE) &
gc->mask_cache;
}
}
+/*
+ * Bridge IRQ_CAUSE is asserted regardless of IRQ_MASK register.
+ * To avoid interrupt events on stale irqs, we clear them before unmask.
+ */
+static unsigned int orion_bridge_irq_startup(struct irq_data *d)
+{
+ struct irq_chip_type *ct = irq_data_get_chip_type(d);
+
+ ct->chip.irq_ack(d);
+ ct->chip.irq_unmask(d);
+ return 0;
+}
+
static int __init orion_bridge_irq_init(struct device_node *np,
struct device_node *parent)
{
}
ret = irq_alloc_domain_generic_chips(domain, nrirqs, 1, np->name,
- handle_level_irq, clr, 0, IRQ_GC_INIT_MASK_CACHE);
+ handle_edge_irq, clr, 0, IRQ_GC_INIT_MASK_CACHE);
if (ret) {
pr_err("%s: unable to alloc irq domain gc\n", np->name);
return ret;
gc->chip_types[0].regs.ack = ORION_BRIDGE_IRQ_CAUSE;
gc->chip_types[0].regs.mask = ORION_BRIDGE_IRQ_MASK;
+ gc->chip_types[0].chip.irq_startup = orion_bridge_irq_startup;
gc->chip_types[0].chip.irq_ack = irq_gc_ack_clr_bit;
gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;
- /* mask all interrupts */
+ /* mask and clear all interrupts */
writel(0, gc->reg_base + ORION_BRIDGE_IRQ_MASK);
+ writel(0, gc->reg_base + ORION_BRIDGE_IRQ_CAUSE);
irq_set_handler_data(irq, domain);
irq_set_chained_handler(irq, orion_bridge_irq_handler);
/**
* struct vic_device - VIC PM device
+ * @parent_irq: The parent IRQ number of the VIC if cascaded, or 0.
* @irq: The IRQ number for the base of the VIC.
* @base: The register base for the VIC.
* @valid_sources: A bitmask of valid interrupts
return handled;
}
+static void vic_handle_irq_cascaded(unsigned int irq, struct irq_desc *desc)
+{
+ u32 stat, hwirq;
+ struct vic_device *vic = irq_desc_get_handler_data(desc);
+
+ while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
+ hwirq = ffs(stat) - 1;
+ generic_handle_irq(irq_find_mapping(vic->domain, hwirq));
+ }
+}
+
/*
* Keep iterating over all registered VIC's until there are no pending
* interrupts.
/**
* vic_register() - Register a VIC.
* @base: The base address of the VIC.
+ * @parent_irq: The parent IRQ if cascaded, else 0.
* @irq: The base IRQ for the VIC.
* @valid_sources: bitmask of valid interrupts
* @resume_sources: bitmask of interrupts allowed for resume sources.
*
* This also configures the IRQ domain for the VIC.
*/
-static void __init vic_register(void __iomem *base, unsigned int irq,
+static void __init vic_register(void __iomem *base, unsigned int parent_irq,
+ unsigned int irq,
u32 valid_sources, u32 resume_sources,
struct device_node *node)
{
v->base = base;
v->valid_sources = valid_sources;
v->resume_sources = resume_sources;
- v->irq = irq;
set_handle_irq(vic_handle_irq);
vic_id++;
+
+ if (parent_irq) {
+ irq_set_handler_data(parent_irq, v);
+ irq_set_chained_handler(parent_irq, vic_handle_irq_cascaded);
+ }
+
v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
&vic_irqdomain_ops, v);
/* create an IRQ mapping for each valid IRQ */
for (i = 0; i < fls(valid_sources); i++)
if (valid_sources & (1 << i))
irq_create_mapping(v->domain, i);
+ /* If no base IRQ was passed, figure out our allocated base */
+ if (irq)
+ v->irq = irq;
+ else
+ v->irq = irq_find_mapping(v->domain, 0);
}
static void vic_ack_irq(struct irq_data *d)
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
}
- vic_register(base, irq_start, vic_sources, 0, node);
+ vic_register(base, 0, irq_start, vic_sources, 0, node);
}
-void __init __vic_init(void __iomem *base, int irq_start,
+void __init __vic_init(void __iomem *base, int parent_irq, int irq_start,
u32 vic_sources, u32 resume_sources,
struct device_node *node)
{
vic_init2(base);
- vic_register(base, irq_start, vic_sources, resume_sources, node);
+ vic_register(base, parent_irq, irq_start, vic_sources, resume_sources, node);
}
/**
void __init vic_init(void __iomem *base, unsigned int irq_start,
u32 vic_sources, u32 resume_sources)
{
- __vic_init(base, irq_start, vic_sources, resume_sources, NULL);
+ __vic_init(base, 0, irq_start, vic_sources, resume_sources, NULL);
+}
+
+/**
+ * vic_init_cascaded() - initialise a cascaded vectored interrupt controller
+ * @base: iomem base address
+ * @parent_irq: the parent IRQ we're cascaded off
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ *
+ * This returns the base for the new interrupts or negative on error.
+ */
+int __init vic_init_cascaded(void __iomem *base, unsigned int parent_irq,
+ u32 vic_sources, u32 resume_sources)
+{
+ struct vic_device *v;
+
+ v = &vic_devices[vic_id];
+ __vic_init(base, parent_irq, 0, vic_sources, resume_sources, NULL);
+ /* Return out acquired base */
+ return v->irq;
}
+EXPORT_SYMBOL_GPL(vic_init_cascaded);
#ifdef CONFIG_OF
int __init vic_of_init(struct device_node *node, struct device_node *parent)
/*
* Passing 0 as first IRQ makes the simple domain allocate descriptors
*/
- __vic_init(regs, 0, interrupt_mask, wakeup_mask, node);
+ __vic_init(regs, 0, 0, interrupt_mask, wakeup_mask, node);
return 0;
}
--- /dev/null
+/*
+ * linux/drivers/irqchip/irq-zevio.c
+ *
+ * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach/irq.h>
+#include <asm/exception.h>
+
+#include "irqchip.h"
+
+#define IO_STATUS 0x000
+#define IO_RAW_STATUS 0x004
+#define IO_ENABLE 0x008
+#define IO_DISABLE 0x00C
+#define IO_CURRENT 0x020
+#define IO_RESET 0x028
+#define IO_MAX_PRIOTY 0x02C
+
+#define IO_IRQ_BASE 0x000
+#define IO_FIQ_BASE 0x100
+
+#define IO_INVERT_SEL 0x200
+#define IO_STICKY_SEL 0x204
+#define IO_PRIORITY_SEL 0x300
+
+#define MAX_INTRS 32
+#define FIQ_START MAX_INTRS
+
+static struct irq_domain *zevio_irq_domain;
+static void __iomem *zevio_irq_io;
+
+static void zevio_irq_ack(struct irq_data *irqd)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(irqd);
+ struct irq_chip_regs *regs =
+ &container_of(irqd->chip, struct irq_chip_type, chip)->regs;
+
+ readl(gc->reg_base + regs->ack);
+}
+
+static asmlinkage void __exception_irq_entry zevio_handle_irq(struct pt_regs *regs)
+{
+ int irqnr;
+
+ while (readl(zevio_irq_io + IO_STATUS)) {
+ irqnr = readl(zevio_irq_io + IO_CURRENT);
+ irqnr = irq_find_mapping(zevio_irq_domain, irqnr);
+ handle_IRQ(irqnr, regs);
+ };
+}
+
+static void __init zevio_init_irq_base(void __iomem *base)
+{
+ /* Disable all interrupts */
+ writel(~0, base + IO_DISABLE);
+
+ /* Accept interrupts of all priorities */
+ writel(0xF, base + IO_MAX_PRIOTY);
+
+ /* Reset existing interrupts */
+ readl(base + IO_RESET);
+}
+
+static int __init zevio_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ unsigned int clr = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
+ struct irq_chip_generic *gc;
+ int ret;
+
+ if (WARN_ON(zevio_irq_io || zevio_irq_domain))
+ return -EBUSY;
+
+ zevio_irq_io = of_iomap(node, 0);
+ BUG_ON(!zevio_irq_io);
+
+ /* Do not invert interrupt status bits */
+ writel(~0, zevio_irq_io + IO_INVERT_SEL);
+
+ /* Disable sticky interrupts */
+ writel(0, zevio_irq_io + IO_STICKY_SEL);
+
+ /* We don't use IRQ priorities. Set each IRQ to highest priority. */
+ memset_io(zevio_irq_io + IO_PRIORITY_SEL, 0, MAX_INTRS * sizeof(u32));
+
+ /* Init IRQ and FIQ */
+ zevio_init_irq_base(zevio_irq_io + IO_IRQ_BASE);
+ zevio_init_irq_base(zevio_irq_io + IO_FIQ_BASE);
+
+ zevio_irq_domain = irq_domain_add_linear(node, MAX_INTRS,
+ &irq_generic_chip_ops, NULL);
+ BUG_ON(!zevio_irq_domain);
+
+ ret = irq_alloc_domain_generic_chips(zevio_irq_domain, MAX_INTRS, 1,
+ "zevio_intc", handle_level_irq,
+ clr, 0, IRQ_GC_INIT_MASK_CACHE);
+ BUG_ON(ret);
+
+ gc = irq_get_domain_generic_chip(zevio_irq_domain, 0);
+ gc->reg_base = zevio_irq_io;
+ gc->chip_types[0].chip.irq_ack = zevio_irq_ack;
+ gc->chip_types[0].chip.irq_mask = irq_gc_mask_disable_reg;
+ gc->chip_types[0].chip.irq_unmask = irq_gc_unmask_enable_reg;
+ gc->chip_types[0].regs.mask = IO_IRQ_BASE + IO_ENABLE;
+ gc->chip_types[0].regs.enable = IO_IRQ_BASE + IO_ENABLE;
+ gc->chip_types[0].regs.disable = IO_IRQ_BASE + IO_DISABLE;
+ gc->chip_types[0].regs.ack = IO_IRQ_BASE + IO_RESET;
+
+ set_handle_irq(zevio_handle_irq);
+
+ pr_info("TI-NSPIRE classic IRQ controller\n");
+ return 0;
+}
+
+IRQCHIP_DECLARE(zevio_irq, "lsi,zevio-intc", zevio_of_init);
dp += sprintf(dp, " octet 3 ");
dp += prbits(dp, *p, 8, 8);
*dp++ = '\n';
- if (!(*p++ & 80)) {
+ if (!(*p++ & 0x80)) {
dp += sprintf(dp, " octet 4 ");
dp += prbits(dp, *p++, 8, 8);
*dp++ = '\n';
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
depends on LEDS_CLASS
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
default y
help
This option enable support for the dual-GPIO LED found on the
config LEDS_NETXBIG
tristate "LED support for Big Network series LEDs"
depends on LEDS_CLASS
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
default y
help
This option enable support for LEDs found on the LaCie 2Big
#define GC_MARK_RECLAIMABLE 0
#define GC_MARK_DIRTY 1
#define GC_MARK_METADATA 2
-BITMASK(GC_SECTORS_USED, struct bucket, gc_mark, 2, 13);
+#define GC_SECTORS_USED_SIZE 13
+#define MAX_GC_SECTORS_USED (~(~0ULL << GC_SECTORS_USED_SIZE))
+BITMASK(GC_SECTORS_USED, struct bucket, gc_mark, 2, GC_SECTORS_USED_SIZE);
BITMASK(GC_MOVE, struct bucket, gc_mark, 15, 1);
#include "journal.h"
for (k = i->start; k < bset_bkey_last(i); k = next) {
next = bkey_next(k);
- printk(KERN_ERR "block %u key %zi/%u: ", set,
+ printk(KERN_ERR "block %u key %li/%u: ", set,
(uint64_t *) k - i->d, i->keys);
if (b->ops->key_dump)
struct bset *out = (void *) __get_free_pages(__GFP_NOWARN|GFP_NOIO,
order);
if (!out) {
+ struct page *outp;
+
BUG_ON(order > state->page_order);
- out = page_address(mempool_alloc(state->pool, GFP_NOIO));
+ outp = mempool_alloc(state->pool, GFP_NOIO);
+ out = page_address(outp);
used_mempool = true;
order = state->page_order;
}
/* guard against overflow */
SET_GC_SECTORS_USED(g, min_t(unsigned,
GC_SECTORS_USED(g) + KEY_SIZE(k),
- (1 << 14) - 1));
+ MAX_GC_SECTORS_USED));
BUG_ON(!GC_SECTORS_USED(g));
}
static size_t insert_u64s_remaining(struct btree *b)
{
- ssize_t ret = bch_btree_keys_u64s_remaining(&b->keys);
+ long ret = bch_btree_keys_u64s_remaining(&b->keys);
/*
* Might land in the middle of an existing extent and have to split it
mutex_unlock(&b->c->bucket_lock);
bch_extent_to_text(buf, sizeof(buf), k);
btree_bug(b,
-"inconsistent btree pointer %s: bucket %li pin %i prio %i gen %i last_gc %i mark %llu gc_gen %i",
+"inconsistent btree pointer %s: bucket %zi pin %i prio %i gen %i last_gc %i mark %llu gc_gen %i",
buf, PTR_BUCKET_NR(b->c, k, i), atomic_read(&g->pin),
g->prio, g->gen, g->last_gc, GC_MARK(g), g->gc_gen);
return true;
struct data_insert_op *op = container_of(cl, struct data_insert_op, cl);
struct bio *bio = op->bio, *n;
- if (op->bypass)
- return bch_data_invalidate(cl);
-
if (atomic_sub_return(bio_sectors(bio), &op->c->sectors_to_gc) < 0) {
set_gc_sectors(op->c);
wake_up_gc(op->c);
}
+ if (op->bypass)
+ return bch_data_invalidate(cl);
+
/*
* Journal writes are marked REQ_FLUSH; if the original write was a
* flush, it'll wait on the journal write.
return MAP_CONTINUE;
}
-int bch_bset_print_stats(struct cache_set *c, char *buf)
+static int bch_bset_print_stats(struct cache_set *c, char *buf)
{
struct bset_stats_op op;
int ret;
for (i = 0; i < conf->raid_disks * 2; i++) {
int j;
int size;
+ int uptodate;
struct bio *b = r1_bio->bios[i];
if (b->bi_end_io != end_sync_read)
continue;
- /* fixup the bio for reuse */
+ /* fixup the bio for reuse, but preserve BIO_UPTODATE */
+ uptodate = test_bit(BIO_UPTODATE, &b->bi_flags);
bio_reset(b);
+ if (!uptodate)
+ clear_bit(BIO_UPTODATE, &b->bi_flags);
b->bi_vcnt = vcnt;
b->bi_iter.bi_size = r1_bio->sectors << 9;
b->bi_iter.bi_sector = r1_bio->sector +
int j;
struct bio *pbio = r1_bio->bios[primary];
struct bio *sbio = r1_bio->bios[i];
+ int uptodate = test_bit(BIO_UPTODATE, &sbio->bi_flags);
if (sbio->bi_end_io != end_sync_read)
continue;
+ /* Now we can 'fixup' the BIO_UPTODATE flag */
+ set_bit(BIO_UPTODATE, &sbio->bi_flags);
- if (test_bit(BIO_UPTODATE, &sbio->bi_flags)) {
+ if (uptodate) {
for (j = vcnt; j-- ; ) {
struct page *p, *s;
p = pbio->bi_io_vec[j].bv_page;
if (j >= 0)
atomic64_add(r1_bio->sectors, &mddev->resync_mismatches);
if (j < 0 || (test_bit(MD_RECOVERY_CHECK, &mddev->recovery)
- && test_bit(BIO_UPTODATE, &sbio->bi_flags))) {
+ && uptodate)) {
/* No need to write to this device. */
sbio->bi_end_io = NULL;
rdev_dec_pending(conf->mirrors[i].rdev, mddev);
return sectors * (raid_disks - conf->max_degraded);
}
+static void free_scratch_buffer(struct r5conf *conf, struct raid5_percpu *percpu)
+{
+ safe_put_page(percpu->spare_page);
+ kfree(percpu->scribble);
+ percpu->spare_page = NULL;
+ percpu->scribble = NULL;
+}
+
+static int alloc_scratch_buffer(struct r5conf *conf, struct raid5_percpu *percpu)
+{
+ if (conf->level == 6 && !percpu->spare_page)
+ percpu->spare_page = alloc_page(GFP_KERNEL);
+ if (!percpu->scribble)
+ percpu->scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
+
+ if (!percpu->scribble || (conf->level == 6 && !percpu->spare_page)) {
+ free_scratch_buffer(conf, percpu);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
static void raid5_free_percpu(struct r5conf *conf)
{
- struct raid5_percpu *percpu;
unsigned long cpu;
if (!conf->percpu)
return;
- get_online_cpus();
- for_each_possible_cpu(cpu) {
- percpu = per_cpu_ptr(conf->percpu, cpu);
- safe_put_page(percpu->spare_page);
- kfree(percpu->scribble);
- }
#ifdef CONFIG_HOTPLUG_CPU
unregister_cpu_notifier(&conf->cpu_notify);
#endif
+
+ get_online_cpus();
+ for_each_possible_cpu(cpu)
+ free_scratch_buffer(conf, per_cpu_ptr(conf->percpu, cpu));
put_online_cpus();
free_percpu(conf->percpu);
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
- if (conf->level == 6 && !percpu->spare_page)
- percpu->spare_page = alloc_page(GFP_KERNEL);
- if (!percpu->scribble)
- percpu->scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
-
- if (!percpu->scribble ||
- (conf->level == 6 && !percpu->spare_page)) {
- safe_put_page(percpu->spare_page);
- kfree(percpu->scribble);
+ if (alloc_scratch_buffer(conf, percpu)) {
pr_err("%s: failed memory allocation for cpu%ld\n",
__func__, cpu);
return notifier_from_errno(-ENOMEM);
break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
- safe_put_page(percpu->spare_page);
- kfree(percpu->scribble);
- percpu->spare_page = NULL;
- percpu->scribble = NULL;
+ free_scratch_buffer(conf, per_cpu_ptr(conf->percpu, cpu));
break;
default:
break;
static int raid5_alloc_percpu(struct r5conf *conf)
{
unsigned long cpu;
- struct page *spare_page;
- struct raid5_percpu __percpu *allcpus;
- void *scribble;
- int err;
+ int err = 0;
- allcpus = alloc_percpu(struct raid5_percpu);
- if (!allcpus)
+ conf->percpu = alloc_percpu(struct raid5_percpu);
+ if (!conf->percpu)
return -ENOMEM;
- conf->percpu = allcpus;
+
+#ifdef CONFIG_HOTPLUG_CPU
+ conf->cpu_notify.notifier_call = raid456_cpu_notify;
+ conf->cpu_notify.priority = 0;
+ err = register_cpu_notifier(&conf->cpu_notify);
+ if (err)
+ return err;
+#endif
get_online_cpus();
- err = 0;
for_each_present_cpu(cpu) {
- if (conf->level == 6) {
- spare_page = alloc_page(GFP_KERNEL);
- if (!spare_page) {
- err = -ENOMEM;
- break;
- }
- per_cpu_ptr(conf->percpu, cpu)->spare_page = spare_page;
- }
- scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
- if (!scribble) {
- err = -ENOMEM;
+ err = alloc_scratch_buffer(conf, per_cpu_ptr(conf->percpu, cpu));
+ if (err) {
+ pr_err("%s: failed memory allocation for cpu%ld\n",
+ __func__, cpu);
break;
}
- per_cpu_ptr(conf->percpu, cpu)->scribble = scribble;
}
-#ifdef CONFIG_HOTPLUG_CPU
- conf->cpu_notify.notifier_call = raid456_cpu_notify;
- conf->cpu_notify.priority = 0;
- if (err == 0)
- err = register_cpu_notifier(&conf->cpu_notify);
-#endif
put_online_cpus();
return err;
switch (demod) {
case 0:
- dev_err(&state->priv->i2c->dev,
+ dev_err(&i2c->dev,
"%s: Error attaching frontend %d\n",
KBUILD_MODNAME, demod);
goto error1;
state->demod = demod - 1;
state->priv = priv;
- /* test i2c bus for ack */
- if (demod == 0) {
- if (cx24117_readreg(state, 0x00) < 0)
- goto error3;
- }
-
dev_info(&state->priv->i2c->dev,
"%s: Attaching frontend %d\n",
KBUILD_MODNAME, state->demod);
state->frontend.demodulator_priv = state;
return &state->frontend;
-error3:
- kfree(state);
error2:
cx24117_release_priv(priv);
error1:
* Support for NXT2002 and NXT2004 - VSB/QAM
*
* Copyright (C) 2005 Kirk Lapray <kirk.lapray@gmail.com>
- * Copyright (C) 2006 Michael Krufky <mkrufky@m1k.net>
+ * Copyright (C) 2006-2014 Michael Krufky <mkrufky@linuxtv.org>
* based on nxt2002 by Taylor Jacob <rtjacob@earthlink.net>
* and nxt2004 by Jean-Francois Thibert <jeanfrancois@sagetv.com>
*
sdp_write_and_or(sd, 0xdd, 0xf0, pdata->sdp_free_run_force |
(pdata->sdp_free_run_cbar_en << 1) |
(pdata->sdp_free_run_man_col_en << 2) |
- (pdata->sdp_free_run_force << 3));
+ (pdata->sdp_free_run_auto << 3));
/* TODO from platform data */
cp_write(sd, 0x69, 0x14); /* Enable CP CSC */
u16 count, const u16 *seq)
{
struct i2c_client *c = v4l2_get_subdevdata(&state->sd);
- __be16 buf[count + 1];
- int ret, n;
+ __be16 buf[65];
s5k5baf_i2c_write(state, REG_CMDWR_ADDR, addr);
if (state->error)
return;
+ v4l2_dbg(3, debug, c, "i2c_write_seq(count=%d): %*ph\n", count,
+ min(2 * count, 64), seq);
+
buf[0] = __constant_cpu_to_be16(REG_CMD_BUF);
- for (n = 1; n <= count; ++n)
- buf[n] = cpu_to_be16(*seq++);
- n *= 2;
- ret = i2c_master_send(c, (char *)buf, n);
- v4l2_dbg(3, debug, c, "i2c_write_seq(count=%d): %*ph\n", count,
- min(2 * count, 64), seq - count);
+ while (count > 0) {
+ int n = min_t(int, count, ARRAY_SIZE(buf) - 1);
+ int ret, i;
- if (ret != n) {
- v4l2_err(c, "i2c_write_seq: error during transfer (%d)\n", ret);
- state->error = ret;
+ for (i = 1; i <= n; ++i)
+ buf[i] = cpu_to_be16(*seq++);
+
+ i *= 2;
+ ret = i2c_master_send(c, (char *)buf, i);
+ if (ret != i) {
+ v4l2_err(c, "i2c_write_seq: error during transfer (%d)\n", ret);
+ state->error = ret;
+ break;
+ }
+
+ count -= n;
}
}
},
/* ---- card 0x87---------------------------------- */
[BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
- /* Michael Krufky <mkrufky@m1k.net> */
+ /* Michael Krufky <mkrufky@linuxtv.org> */
.name = "DViCO FusionHDTV 5 Lite",
.tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
.tuner_addr = ADDR_UNSET,
err = device_register(&sub->dev);
if (0 != err) {
- kfree(sub);
+ put_device(&sub->dev);
return err;
}
pr_info("%d: add subdevice \"%s\"\n", core->nr, dev_name(&sub->dev));
}},
},
[SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180] = {
- /* Michael Krufky <mkrufky@m1k.net>
+ /* Michael Krufky <mkrufky@linuxtv.org>
* Uses Alps Electric TDHU2, containing NXT2004 ATSC Decoder
* AFAIK, there is no analog demod, thus,
* no support for analog television.
return 0;
err_gclk:
- clk_disable(fimc->clock[CLK_GATE]);
+ if (!pm_runtime_enabled(dev))
+ clk_disable(fimc->clock[CLK_GATE]);
err_sd:
fimc_unregister_capture_subdev(fimc);
err_sclk:
return ret;
}
+#ifdef CONFIG_PM_RUNTIME
static int fimc_runtime_resume(struct device *dev)
{
struct fimc_dev *fimc = dev_get_drvdata(dev);
dbg("fimc%d: state: 0x%lx", fimc->id, fimc->state);
return ret;
}
+#endif
#ifdef CONFIG_PM_SLEEP
static int fimc_resume(struct device *dev)
if (!pm_runtime_enabled(dev)) {
ret = clk_enable(fimc->clock);
if (ret < 0)
- goto err_clk_put;
+ goto err_sd;
}
fimc->alloc_ctx = vb2_dma_contig_init_ctx(dev);
return 0;
err_clk_dis:
- clk_disable(fimc->clock);
+ if (!pm_runtime_enabled(dev))
+ clk_disable(fimc->clock);
err_sd:
fimc_lite_unregister_capture_subdev(fimc);
err_clk_put:
return ret;
}
+#ifdef CONFIG_PM_RUNTIME
static int fimc_lite_runtime_resume(struct device *dev)
{
struct fimc_lite *fimc = dev_get_drvdata(dev);
clk_disable(fimc->clock);
return 0;
}
+#endif
#ifdef CONFIG_PM_SLEEP
static int fimc_lite_resume(struct device *dev)
{
.name = "YUV 4:2:0 planar, Y/CbCr",
.fourcc = V4L2_PIX_FMT_NV12,
- .depth = 16,
+ .depth = 12,
.colplanes = 2,
.h_align = 1,
.v_align = 1,
{
.name = "YUV 4:2:0 planar, Y/CbCr",
.fourcc = V4L2_PIX_FMT_NV12,
- .depth = 16,
- .colplanes = 4,
+ .depth = 12,
+ .colplanes = 2,
.h_align = 4,
- .v_align = 1,
+ .v_align = 4,
.flags = SJPEG_FMT_FLAG_ENC_OUTPUT |
SJPEG_FMT_FLAG_DEC_CAPTURE |
SJPEG_FMT_FLAG_S5P |
&af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)", NULL) },
{ DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a05,
&af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) },
+ { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xf900,
+ &af9035_props, "Hauppauge WinTV-MiniStick 2", NULL) },
{ }
};
MODULE_DEVICE_TABLE(usb, af9035_id_table);
/*
* mxl111sf-demod.c - driver for the MaxLinear MXL111SF DVB-T demodulator
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
EXPORT_SYMBOL_GPL(mxl111sf_demod_attach);
MODULE_DESCRIPTION("MaxLinear MxL111SF DVB-T demodulator driver");
-MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.1");
/*
* mxl111sf-demod.h - driver for the MaxLinear MXL111SF DVB-T demodulator
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* mxl111sf-gpio.c - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* mxl111sf-gpio.h - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* mxl111sf-i2c.c - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* mxl111sf-i2c.h - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* mxl111sf-phy.c - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* mxl111sf-phy.h - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* mxl111sf-reg.h - driver for the MaxLinear MXL111SF
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
/*
* mxl111sf-tuner.c - driver for the MaxLinear MXL111SF CMOS tuner
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
EXPORT_SYMBOL_GPL(mxl111sf_tuner_attach);
MODULE_DESCRIPTION("MaxLinear MxL111SF CMOS tuner driver");
-MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
MODULE_LICENSE("GPL");
MODULE_VERSION("0.1");
/*
* mxl111sf-tuner.h - driver for the MaxLinear MXL111SF CMOS tuner
*
- * Copyright (C) 2010 Michael Krufky <mkrufky@kernellabs.com>
+ * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#else
static inline
struct dvb_frontend *mxl111sf_tuner_attach(struct dvb_frontend *fe,
- struct mxl111sf_state *mxl_state
+ struct mxl111sf_state *mxl_state,
struct mxl111sf_tuner_config *cfg)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
/*
- * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com)
+ * Copyright (C) 2010-2014 Michael Krufky (mkrufky@linuxtv.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
ret = -EINVAL;
}
- pr_debug("R: (0x%02x, 0x%02x)\n", addr, *data);
+ pr_debug("R: (0x%02x, 0x%02x)\n", addr, buf[1]);
fail:
return ret;
}
module_usb_driver(mxl111sf_usb_driver);
-MODULE_AUTHOR("Michael Krufky <mkrufky@kernellabs.com>");
+MODULE_AUTHOR("Michael Krufky <mkrufky@linuxtv.org>");
MODULE_DESCRIPTION("Driver for MaxLinear MxL111SF");
MODULE_VERSION("1.0");
MODULE_LICENSE("GPL");
/*
- * Copyright (C) 2010 Michael Krufky (mkrufky@kernellabs.com)
+ * Copyright (C) 2010-2014 Michael Krufky (mkrufky@linuxtv.org)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
hex_dump_to_buffer(response, 8, 16, 1, print_buf, 5*buf_size+1, 0);
v4l2_dbg(MSG_INFO, hdpvr_debug, &dev->v4l2_dev, " response: %s\n",
print_buf);
- kfree(print_buf);
#endif
msleep(100);
retval = ret != 8;
unlock:
mutex_unlock(&dev->usbc_mutex);
+#ifdef HDPVR_DEBUG
+ kfree(print_buf);
+#endif
return retval;
}
aspect.denominator = 9;
}
image_width = ((image_height * aspect.numerator) / aspect.denominator);
+ image_width = (image_width + GTF_CELL_GRAN/2) & ~(GTF_CELL_GRAN - 1);
/* Horizontal */
if (default_gtf)
static void videobuf_vm_open(struct vm_area_struct *vma)
{
struct videobuf_mapping *map = vma->vm_private_data;
- struct videobuf_queue *q = map->q;
- dev_dbg(q->dev, "vm_open %p [count=%u,vma=%08lx-%08lx]\n",
+ dev_dbg(map->q->dev, "vm_open %p [count=%u,vma=%08lx-%08lx]\n",
map, map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
map->count++;
- videobuf_queue_unlock(q);
}
static void videobuf_vm_close(struct vm_area_struct *vma)
dev_dbg(q->dev, "vm_close %p [count=%u,vma=%08lx-%08lx]\n",
map, map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
- if (!--map->count) {
+ map->count--;
+ if (0 == map->count) {
struct videobuf_dma_contig_memory *mem;
dev_dbg(q->dev, "munmap %p q=%p\n", map, q);
+ videobuf_queue_lock(q);
/* We need first to cancel streams, before unmapping */
if (q->streaming)
kfree(map);
+ videobuf_queue_unlock(q);
}
- videobuf_queue_unlock(q);
}
static const struct vm_operations_struct videobuf_vm_ops = {
static void videobuf_vm_open(struct vm_area_struct *vma)
{
struct videobuf_mapping *map = vma->vm_private_data;
- struct videobuf_queue *q = map->q;
dprintk(2, "vm_open %p [count=%d,vma=%08lx-%08lx]\n", map,
map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
map->count++;
- videobuf_queue_unlock(q);
}
static void videobuf_vm_close(struct vm_area_struct *vma)
dprintk(2, "vm_close %p [count=%d,vma=%08lx-%08lx]\n", map,
map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
- if (!--map->count) {
+ map->count--;
+ if (0 == map->count) {
dprintk(1, "munmap %p q=%p\n", map, q);
+ videobuf_queue_lock(q);
for (i = 0; i < VIDEO_MAX_FRAME; i++) {
if (NULL == q->bufs[i])
continue;
q->bufs[i]->baddr = 0;
q->ops->buf_release(q, q->bufs[i]);
}
+ videobuf_queue_unlock(q);
kfree(map);
}
- videobuf_queue_unlock(q);
return;
}
static void videobuf_vm_open(struct vm_area_struct *vma)
{
struct videobuf_mapping *map = vma->vm_private_data;
- struct videobuf_queue *q = map->q;
dprintk(2, "vm_open %p [count=%u,vma=%08lx-%08lx]\n", map,
map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
map->count++;
- videobuf_queue_unlock(q);
}
static void videobuf_vm_close(struct vm_area_struct *vma)
dprintk(2, "vm_close %p [count=%u,vma=%08lx-%08lx]\n", map,
map->count, vma->vm_start, vma->vm_end);
- videobuf_queue_lock(q);
- if (!--map->count) {
+ map->count--;
+ if (0 == map->count) {
struct videobuf_vmalloc_memory *mem;
dprintk(1, "munmap %p q=%p\n", map, q);
+ videobuf_queue_lock(q);
/* We need first to cancel streams, before unmapping */
if (q->streaming)
kfree(map);
+ videobuf_queue_unlock(q);
}
- videobuf_queue_unlock(q);
return;
}
return 0;
}
+ if (!q->num_buffers) {
+ dprintk(1, "streamon: no buffers have been allocated\n");
+ return -EINVAL;
+ }
+
/*
* If any buffers were queued before streamon,
* we can now pass them to driver for processing.
unsigned long arg)
{
int ret;
- mutex_lock(&i2o_cfg_mutex);
switch (cmd) {
case I2OGETIOPS:
ret = i2o_cfg_ioctl(file, cmd, arg);
break;
case I2OPASSTHRU32:
+ mutex_lock(&i2o_cfg_mutex);
ret = i2o_cfg_passthru32(file, cmd, arg);
+ mutex_unlock(&i2o_cfg_mutex);
break;
default:
ret = -ENOIOCTLCMD;
break;
}
- mutex_unlock(&i2o_cfg_mutex);
return ret;
}
if (rc != 0) {
dev_err(&pci_dev->dev,
"[%s] genwqe_user_vmap rc=%d\n", __func__, rc);
+ kfree(dma_map);
return rc;
}
list_for_each_entry_safe(cl, next, &dev->file_list, link) {
cl->state = MEI_FILE_DISCONNECTED;
cl->mei_flow_ctrl_creds = 0;
- cl->read_cb = NULL;
cl->timer_count = 0;
}
}
void mei_cl_all_write_clear(struct mei_device *dev)
{
struct mei_cl_cb *cb, *next;
+ struct list_head *list;
- list_for_each_entry_safe(cb, next, &dev->write_list.list, list) {
+ list = &dev->write_list.list;
+ list_for_each_entry_safe(cb, next, list, list) {
+ list_del(&cb->list);
+ mei_io_cb_free(cb);
+ }
+
+ list = &dev->write_waiting_list.list;
+ list_for_each_entry_safe(cb, next, list, list) {
list_del(&cb->list);
mei_io_cb_free(cb);
}
static int _mic_virtio_copy(struct mic_vdev *mvdev,
struct mic_copy_desc *copy)
{
- int ret = 0, iovcnt = copy->iovcnt;
+ int ret = 0;
+ u32 iovcnt = copy->iovcnt;
struct iovec iov;
struct iovec __user *u_iov = copy->iov;
void __user *ubuf = NULL;
ubuf += sizeof(hdr);
ubufcch = ubuf;
- if (gru_user_copy_handle(&ubuf, cch))
- goto fail;
+ if (gru_user_copy_handle(&ubuf, cch)) {
+ if (cch_locked)
+ unlock_cch_handle(cch);
+ return -EFAULT;
+ }
if (cch_locked)
ubufcch->delresp = 0;
bytes = sizeof(hdr) + GRU_CACHE_LINE_BYTES;
ret = -EFAULT;
return ret ? ret : bytes;
-
-fail:
- unlock_cch_handle(cch);
- return -EFAULT;
}
int gru_dump_chiplet_request(unsigned long arg)
goto err_clk_enable;
}
- /*
- * Setup Async configuration register in case we did not boot from
- * NAND and so bootloader did not bother to set it up.
- */
- val = davinci_nand_readl(info, A1CR_OFFSET + info->core_chipsel * 4);
-
- /* Extended Wait is not valid and Select Strobe mode is not used */
- val &= ~(ACR_ASIZE_MASK | ACR_EW_MASK | ACR_SS_MASK);
- if (info->chip.options & NAND_BUSWIDTH_16)
- val |= 0x1;
-
- davinci_nand_writel(info, A1CR_OFFSET + info->core_chipsel * 4, val);
-
- ret = 0;
- if (info->timing)
- ret = davinci_aemif_setup_timing(info->timing, info->base,
- info->core_chipsel);
- if (ret < 0) {
- dev_dbg(&pdev->dev, "NAND timing values setup fail\n");
- goto err;
- }
-
spin_lock_irq(&davinci_nand_lock);
/* put CSxNAND into NAND mode */
if (slave_ops->ndo_set_mac_address == NULL) {
if (!bond_has_slaves(bond)) {
- pr_warning("%s: Warning: The first slave device specified does not support setting the MAC address. Setting fail_over_mac to active.",
- bond_dev->name);
- bond->params.fail_over_mac = BOND_FOM_ACTIVE;
+ pr_warn("%s: Warning: The first slave device specified does not support setting the MAC address.\n",
+ bond_dev->name);
+ if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
+ bond->params.fail_over_mac = BOND_FOM_ACTIVE;
+ pr_warn("%s: Setting fail_over_mac to active for active-backup mode.\n",
+ bond_dev->name);
+ }
} else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n",
bond_dev->name);
*/
memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN);
- if (!bond->params.fail_over_mac) {
+ if (!bond->params.fail_over_mac ||
+ bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
/*
* Set slave to master's mac address. The application already
* set the master's mac address to that of the first slave
slave_dev->npinfo = bond->dev->npinfo;
if (slave_dev->npinfo) {
if (slave_enable_netpoll(new_slave)) {
- read_unlock(&bond->lock);
pr_info("Error, %s: master_dev is using netpoll, "
"but new slave device does not support netpoll.\n",
bond_dev->name);
dev_close(slave_dev);
err_restore_mac:
- if (!bond->params.fail_over_mac) {
+ if (!bond->params.fail_over_mac ||
+ bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
/* XXX TODO - fom follow mode needs to change master's
* MAC if this slave's MAC is in use by the bond, or at
* least print a warning.
bond->current_arp_slave = NULL;
- if (!all && !bond->params.fail_over_mac) {
+ if (!all && (!bond->params.fail_over_mac ||
+ bond->params.mode != BOND_MODE_ACTIVEBACKUP)) {
if (ether_addr_equal_64bits(bond_dev->dev_addr, slave->perm_hwaddr) &&
bond_has_slaves(bond))
pr_warn("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n",
/* close slave before restoring its mac address */
dev_close(slave_dev);
- if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
+ if (bond->params.fail_over_mac != BOND_FOM_ACTIVE ||
+ bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
/* restore original ("permanent") mac address */
memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
addr.sa_family = slave_dev->type;
/* If fail_over_mac is enabled, do nothing and return success.
* Returning an error causes ifenslave to fail.
*/
- if (bond->params.fail_over_mac)
+ if (bond->params.fail_over_mac &&
+ bond->params.mode == BOND_MODE_ACTIVEBACKUP)
return 0;
if (!is_valid_ether_addr(sa->sa_data))
config CAN_FLEXCAN
tristate "Support for Freescale FLEXCAN based chips"
- depends on (ARM && CPU_LITTLE_ENDIAN) || PPC
+ depends on ARM || PPC
---help---
Say Y here if you want to support for Freescale FlexCAN.
}
if (!priv->echo_skb[idx]) {
- struct sock *srcsk = skb->sk;
- if (atomic_read(&skb->users) != 1) {
- struct sk_buff *old_skb = skb;
-
- skb = skb_clone(old_skb, GFP_ATOMIC);
- kfree_skb(old_skb);
- if (!skb)
- return;
- } else
- skb_orphan(skb);
-
- skb->sk = srcsk;
+ skb = can_create_echo_skb(skb);
+ if (!skb)
+ return;
/* make settings for echo to reduce code in irq context */
skb->protocol = htons(ETH_P_CAN);
};
/*
- * Abstract off the read/write for arm versus ppc.
+ * Abstract off the read/write for arm versus ppc. This
+ * assumes that PPC uses big-endian registers and everything
+ * else uses little-endian registers, independent of CPU
+ * endianess.
*/
-#if defined(__BIG_ENDIAN)
+#if defined(CONFIG_PPC)
static inline u32 flexcan_read(void __iomem *addr)
{
return in_be32(addr);
#include <linux/netdevice.h>
#include <linux/can.h>
#include <linux/can/dev.h>
+#include <linux/can/skb.h>
#include <linux/can/error.h>
#include <linux/mfd/janz.h>
*/
static void ican3_put_echo_skb(struct ican3_dev *mod, struct sk_buff *skb)
{
- struct sock *srcsk = skb->sk;
-
- if (atomic_read(&skb->users) != 1) {
- struct sk_buff *old_skb = skb;
-
- skb = skb_clone(old_skb, GFP_ATOMIC);
- kfree_skb(old_skb);
- if (!skb)
- return;
- } else {
- skb_orphan(skb);
- }
-
- skb->sk = srcsk;
+ skb = can_create_echo_skb(skb);
+ if (!skb)
+ return;
/* save this skb for tx interrupt echo handling */
skb_queue_tail(&mod->echoq, skb);
/* process all communication messages */
while (true) {
- struct ican3_msg msg;
+ struct ican3_msg uninitialized_var(msg);
ret = ican3_recv_msg(mod, &msg);
if (ret)
break;
#include <linux/if_ether.h>
#include <linux/can.h>
#include <linux/can/dev.h>
+#include <linux/can/skb.h>
#include <linux/slab.h>
#include <net/rtnetlink.h>
stats->rx_packets++;
stats->rx_bytes += cfd->len;
}
- kfree_skb(skb);
+ consume_skb(skb);
return NETDEV_TX_OK;
}
/* perform standard echo handling for CAN network interfaces */
if (loop) {
- struct sock *srcsk = skb->sk;
- skb = skb_share_check(skb, GFP_ATOMIC);
+ skb = can_create_echo_skb(skb);
if (!skb)
return NETDEV_TX_OK;
/* receive with packet counting */
- skb->sk = srcsk;
vcan_rx(skb, dev);
} else {
/* no looped packets => no counting */
- kfree_skb(skb);
+ consume_skb(skb);
}
return NETDEV_TX_OK;
}
static void __exit vortex_eisa_cleanup(void)
{
- struct vortex_private *vp;
void __iomem *ioaddr;
#ifdef CONFIG_EISA
#endif
if (compaq_net_device) {
- vp = netdev_priv(compaq_net_device);
ioaddr = ioport_map(compaq_net_device->base_addr,
VORTEX_TOTAL_SIZE);
}
static const struct of_device_id emac_of_match[] = {
+ {.compatible = "allwinner,sun4i-a10-emac",},
+
+ /* Deprecated */
{.compatible = "allwinner,sun4i-emac",},
{},
};
alx = netdev_priv(netdev);
spin_lock_init(&alx->hw.mdio_lock);
spin_lock_init(&alx->irq_lock);
+ spin_lock_init(&alx->stats_lock);
alx->dev = netdev;
alx->hw.pdev = pdev;
alx->msg_enable = NETIF_MSG_LINK | NETIF_MSG_HW | NETIF_MSG_IFUP |
static int disable_msi = 0;
-module_param(disable_msi, int, 0);
+module_param(disable_msi, int, S_IRUGO);
MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)");
typedef enum {
else /* CHIP_IS_E1X */
start_params->network_cos_mode = FW_WRR;
- start_params->gre_tunnel_mode = IPGRE_TUNNEL;
+ start_params->gre_tunnel_mode = L2GRE_TUNNEL;
start_params->gre_tunnel_rss = GRE_INNER_HEADERS_RSS;
return bnx2x_func_state_change(bp, &func_params);
MODULE_FIRMWARE(FW_FILE_NAME_E2);
int bnx2x_num_queues;
-module_param_named(num_queues, bnx2x_num_queues, int, 0);
+module_param_named(num_queues, bnx2x_num_queues, int, S_IRUGO);
MODULE_PARM_DESC(num_queues,
" Set number of queues (default is as a number of CPUs)");
static int disable_tpa;
-module_param(disable_tpa, int, 0);
+module_param(disable_tpa, int, S_IRUGO);
MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature");
static int int_mode;
-module_param(int_mode, int, 0);
+module_param(int_mode, int, S_IRUGO);
MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X "
"(1 INT#x; 2 MSI)");
static int dropless_fc;
-module_param(dropless_fc, int, 0);
+module_param(dropless_fc, int, S_IRUGO);
MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring");
static int mrrs = -1;
-module_param(mrrs, int, 0);
+module_param(mrrs, int, S_IRUGO);
MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)");
static int debug;
-module_param(debug, int, 0);
+module_param(debug, int, S_IRUGO);
MODULE_PARM_DESC(debug, " Default debug msglevel");
struct workqueue_struct *bnx2x_wq;
if (vf->cfg_flags & VF_CFG_INT_SIMD)
val |= IGU_VF_CONF_SINGLE_ISR_EN;
val &= ~IGU_VF_CONF_PARENT_MASK;
- val |= BP_FUNC(bp) << IGU_VF_CONF_PARENT_SHIFT; /* parent PF */
+ val |= (BP_ABS_FUNC(bp) >> 1) << IGU_VF_CONF_PARENT_SHIFT;
REG_WR(bp, IGU_REG_VF_CONFIGURATION, val);
DP(BNX2X_MSG_IOV,
- "value in IGU_REG_VF_CONFIGURATION of vf %d after write %x\n",
- vf->abs_vfid, REG_RD(bp, IGU_REG_VF_CONFIGURATION));
+ "value in IGU_REG_VF_CONFIGURATION of vf %d after write is 0x%08x\n",
+ vf->abs_vfid, val);
bnx2x_pretend_func(bp, BP_ABS_FUNC(bp));
tg3_writephy(tp, MII_CTRL1000, phy9_orig);
- if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32)) {
- reg32 &= ~0x3000;
- tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
- } else if (!err)
- err = -EBUSY;
+ err = tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32);
+ if (err)
+ return err;
- return err;
+ reg32 &= ~0x3000;
+ tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32);
+
+ return 0;
}
static void tg3_carrier_off(struct tg3 *tp)
tg3_netif_stop(tp);
+ tg3_set_mtu(dev, tp, new_mtu);
+
tg3_full_lock(tp, 1);
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
- tg3_set_mtu(dev, tp, new_mtu);
-
/* Reset PHY, otherwise the read DMA engine will be in a mode that
* breaks all requests to 256 bytes.
*/
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
+#include <linux/clk.h>
#include <linux/crc32.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#define ETH_HASH0 0x48
#define ETH_HASH1 0x4c
#define ETH_TXCTRL 0x50
+#define ETH_END 0x54
/* mode register */
#define MODER_RXEN (1 << 0) /* receive enable */
* @membase: pointer to buffer memory region
* @dma_alloc: dma allocated buffer size
* @io_region_size: I/O memory region size
+ * @num_bd: number of buffer descriptors
* @num_tx: number of send buffers
* @cur_tx: last send buffer written
* @dty_tx: last buffer actually sent
int dma_alloc;
resource_size_t io_region_size;
+ unsigned int num_bd;
unsigned int num_tx;
unsigned int cur_tx;
unsigned int dty_tx;
struct phy_device *phy;
struct mii_bus *mdio;
+ struct clk *clk;
s8 phy_id;
};
}
priv->phy = phy;
+ phy->advertising &= ~(ADVERTISED_1000baseT_Full |
+ ADVERTISED_1000baseT_Half);
+ phy->supported &= ~(SUPPORTED_1000baseT_Full |
+ SUPPORTED_1000baseT_Half);
+
return 0;
}
return NETDEV_TX_OK;
}
+static int ethoc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ethoc *priv = netdev_priv(dev);
+ struct phy_device *phydev = priv->phy;
+
+ if (!phydev)
+ return -EOPNOTSUPP;
+
+ return phy_ethtool_gset(phydev, cmd);
+}
+
+static int ethoc_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct ethoc *priv = netdev_priv(dev);
+ struct phy_device *phydev = priv->phy;
+
+ if (!phydev)
+ return -EOPNOTSUPP;
+
+ return phy_ethtool_sset(phydev, cmd);
+}
+
+static int ethoc_get_regs_len(struct net_device *netdev)
+{
+ return ETH_END;
+}
+
+static void ethoc_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct ethoc *priv = netdev_priv(dev);
+ u32 *regs_buff = p;
+ unsigned i;
+
+ regs->version = 0;
+ for (i = 0; i < ETH_END / sizeof(u32); ++i)
+ regs_buff[i] = ethoc_read(priv, i * sizeof(u32));
+}
+
+static void ethoc_get_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ring)
+{
+ struct ethoc *priv = netdev_priv(dev);
+
+ ring->rx_max_pending = priv->num_bd - 1;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->tx_max_pending = priv->num_bd - 1;
+
+ ring->rx_pending = priv->num_rx;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+ ring->tx_pending = priv->num_tx;
+}
+
+static int ethoc_set_ringparam(struct net_device *dev,
+ struct ethtool_ringparam *ring)
+{
+ struct ethoc *priv = netdev_priv(dev);
+
+ if (ring->tx_pending < 1 || ring->rx_pending < 1 ||
+ ring->tx_pending + ring->rx_pending > priv->num_bd)
+ return -EINVAL;
+ if (ring->rx_mini_pending || ring->rx_jumbo_pending)
+ return -EINVAL;
+
+ if (netif_running(dev)) {
+ netif_tx_disable(dev);
+ ethoc_disable_rx_and_tx(priv);
+ ethoc_disable_irq(priv, INT_MASK_TX | INT_MASK_RX);
+ synchronize_irq(dev->irq);
+ }
+
+ priv->num_tx = rounddown_pow_of_two(ring->tx_pending);
+ priv->num_rx = ring->rx_pending;
+ ethoc_init_ring(priv, dev->mem_start);
+
+ if (netif_running(dev)) {
+ ethoc_enable_irq(priv, INT_MASK_TX | INT_MASK_RX);
+ ethoc_enable_rx_and_tx(priv);
+ netif_wake_queue(dev);
+ }
+ return 0;
+}
+
+const struct ethtool_ops ethoc_ethtool_ops = {
+ .get_settings = ethoc_get_settings,
+ .set_settings = ethoc_set_settings,
+ .get_regs_len = ethoc_get_regs_len,
+ .get_regs = ethoc_get_regs,
+ .get_link = ethtool_op_get_link,
+ .get_ringparam = ethoc_get_ringparam,
+ .set_ringparam = ethoc_set_ringparam,
+ .get_ts_info = ethtool_op_get_ts_info,
+};
+
static const struct net_device_ops ethoc_netdev_ops = {
.ndo_open = ethoc_open,
.ndo_stop = ethoc_stop,
int num_bd;
int ret = 0;
bool random_mac = false;
+ struct ethoc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ u32 eth_clkfreq = pdata ? pdata->eth_clkfreq : 0;
/* allocate networking device */
netdev = alloc_etherdev(sizeof(struct ethoc));
ret = -ENODEV;
goto error;
}
+ priv->num_bd = num_bd;
/* num_tx must be a power of two */
priv->num_tx = rounddown_pow_of_two(num_bd >> 1);
priv->num_rx = num_bd - priv->num_tx;
}
/* Allow the platform setup code to pass in a MAC address. */
- if (dev_get_platdata(&pdev->dev)) {
- struct ethoc_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ if (pdata) {
memcpy(netdev->dev_addr, pdata->hwaddr, IFHWADDRLEN);
priv->phy_id = pdata->phy_id;
} else {
if (random_mac)
netdev->addr_assign_type = NET_ADDR_RANDOM;
+ /* Allow the platform setup code to adjust MII management bus clock. */
+ if (!eth_clkfreq) {
+ struct clk *clk = devm_clk_get(&pdev->dev, NULL);
+
+ if (!IS_ERR(clk)) {
+ priv->clk = clk;
+ clk_prepare_enable(clk);
+ eth_clkfreq = clk_get_rate(clk);
+ }
+ }
+ if (eth_clkfreq) {
+ u32 clkdiv = MIIMODER_CLKDIV(eth_clkfreq / 2500000 + 1);
+
+ if (!clkdiv)
+ clkdiv = 2;
+ dev_dbg(&pdev->dev, "setting MII clkdiv to %u\n", clkdiv);
+ ethoc_write(priv, MIIMODER,
+ (ethoc_read(priv, MIIMODER) & MIIMODER_NOPRE) |
+ clkdiv);
+ }
+
/* register MII bus */
priv->mdio = mdiobus_alloc();
if (!priv->mdio) {
netdev->netdev_ops = ðoc_netdev_ops;
netdev->watchdog_timeo = ETHOC_TIMEOUT;
netdev->features |= 0;
+ netdev->ethtool_ops = ðoc_ethtool_ops;
/* setup NAPI */
netif_napi_add(netdev, &priv->napi, ethoc_poll, 64);
kfree(priv->mdio->irq);
mdiobus_free(priv->mdio);
free:
+ if (priv->clk)
+ clk_disable_unprepare(priv->clk);
free_netdev(netdev);
out:
return ret;
kfree(priv->mdio->irq);
mdiobus_free(priv->mdio);
}
+ if (priv->clk)
+ clk_disable_unprepare(priv->clk);
unregister_netdev(netdev);
free_netdev(netdev);
}
*enable_wake = false;
}
- pci_disable_device(pdev);
+ pci_clear_master(pdev);
}
static int __e100_power_off(struct pci_dev *pdev, bool wake)
config MLX5_CORE
tristate
- depends on PCI && X86
+ depends on PCI
default n
int vpath_idx = 0;
enum vxge_hw_status status = VXGE_HW_OK;
struct vxge_vpath *vpath = NULL;
- struct __vxge_hw_device *hldev;
-
- hldev = pci_get_drvdata(vdev->pdev);
mac_address = (u8 *)&mac_addr;
memcpy(mac_address, mac_header, ETH_ALEN);
static void vxge_rem_isr(struct vxgedev *vdev)
{
- struct __vxge_hw_device *hldev;
- hldev = pci_get_drvdata(vdev->pdev);
-
#ifdef CONFIG_PCI_MSI
if (vdev->config.intr_type == MSI_X) {
vxge_rem_msix_isr(vdev);
}
/* Transfer ownership of the skb to the final buffer */
+#ifdef EFX_USE_PIO
finish_packet:
+#endif
buffer->skb = skb;
buffer->flags = EFX_TX_BUF_SKB | dma_flags;
mdio_node = of_find_node_by_phandle(be32_to_cpup(parp));
phyid = be32_to_cpup(parp+1);
mdio = of_find_device_by_node(mdio_node);
- snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
- PHY_ID_FMT, mdio->name, phyid);
+
+ if (strncmp(mdio->name, "gpio", 4) == 0) {
+ /* GPIO bitbang MDIO driver attached */
+ struct mii_bus *bus = dev_get_drvdata(&mdio->dev);
+
+ snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
+ PHY_ID_FMT, bus->id, phyid);
+ } else {
+ /* davinci MDIO driver attached */
+ snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
+ PHY_ID_FMT, mdio->name, phyid);
+ }
mac_addr = of_get_mac_address(slave_node);
if (mac_addr)
To compile it as a module, choose M here: the module will be called
kingsun-sir.
-config EP7211_DONGLE
- tristate "Cirrus Logic clps711x I/R support"
- depends on IRTTY_SIR && ARCH_CLPS711X && IRDA
- help
- Say Y here if you want to build support for the Cirrus logic
- EP7211 chipset's infrared module.
-
config KSDAZZLE_DONGLE
tristate "KingSun Dazzle IrDA-USB dongle"
depends on IRDA && USB
obj-$(CONFIG_ACT200L_DONGLE) += act200l-sir.o
obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o
obj-$(CONFIG_TOIM3232_DONGLE) += toim3232-sir.o
-obj-$(CONFIG_EP7211_DONGLE) += ep7211-sir.o
obj-$(CONFIG_KINGSUN_DONGLE) += kingsun-sir.o
obj-$(CONFIG_KSDAZZLE_DONGLE) += ksdazzle-sir.o
obj-$(CONFIG_KS959_DONGLE) += ks959-sir.o
+++ /dev/null
-/*
- * IR port driver for the Cirrus Logic CLPS711X processors
- *
- * Copyright 2001, Blue Mug Inc. All rights reserved.
- * Copyright 2007, Samuel Ortiz <samuel@sortiz.org>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-
-#include "sir-dev.h"
-
-static int clps711x_dongle_open(struct sir_dev *dev)
-{
- unsigned int syscon;
-
- /* Turn on the SIR encoder. */
- syscon = clps_readl(SYSCON1);
- syscon |= SYSCON1_SIREN;
- clps_writel(syscon, SYSCON1);
-
- return 0;
-}
-
-static int clps711x_dongle_close(struct sir_dev *dev)
-{
- unsigned int syscon;
-
- /* Turn off the SIR encoder. */
- syscon = clps_readl(SYSCON1);
- syscon &= ~SYSCON1_SIREN;
- clps_writel(syscon, SYSCON1);
-
- return 0;
-}
-
-static struct dongle_driver clps711x_dongle = {
- .owner = THIS_MODULE,
- .driver_name = "EP7211 IR driver",
- .type = IRDA_EP7211_DONGLE,
- .open = clps711x_dongle_open,
- .close = clps711x_dongle_close,
-};
-
-static int clps711x_sir_probe(struct platform_device *pdev)
-{
- return irda_register_dongle(&clps711x_dongle);
-}
-
-static int clps711x_sir_remove(struct platform_device *pdev)
-{
- return irda_unregister_dongle(&clps711x_dongle);
-}
-
-static struct platform_driver clps711x_sir_driver = {
- .driver = {
- .name = "sir-clps711x",
- .owner = THIS_MODULE,
- },
- .probe = clps711x_sir_probe,
- .remove = clps711x_sir_remove,
-};
-module_platform_driver(clps711x_sir_driver);
-
-MODULE_AUTHOR("Samuel Ortiz <samuel@sortiz.org>");
-MODULE_DESCRIPTION("EP7211 IR dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-13"); /* IRDA_EP7211_DONGLE */
if (on) {
gpio_num = gpio_tab[EXTTS0_GPIO + index];
evnt |= (gpio_num & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT;
- evnt |= EVNT_RISE;
+ if (rq->extts.flags & PTP_FALLING_EDGE)
+ evnt |= EVNT_FALL;
+ else
+ evnt |= EVNT_RISE;
}
ext_write(0, phydev, PAGE5, PTP_EVNT, evnt);
return 0;
kfree(dp83640);
}
+static int dp83640_config_init(struct phy_device *phydev)
+{
+ enable_status_frames(phydev, true);
+ ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE);
+ return 0;
+}
+
static int dp83640_ack_interrupt(struct phy_device *phydev)
{
int err = phy_read(phydev, MII_DP83640_MISR);
mutex_lock(&dp83640->clock->extreg_lock);
- if (dp83640->hwts_tx_en || dp83640->hwts_rx_en) {
- enable_status_frames(phydev, true);
- ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE);
- }
-
ext_write(0, phydev, PAGE5, PTP_TXCFG0, txcfg0);
ext_write(0, phydev, PAGE5, PTP_RXCFG0, rxcfg0);
}
/* fall through */
case HWTSTAMP_TX_ON:
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
skb_queue_tail(&dp83640->tx_queue, skb);
schedule_work(&dp83640->ts_work);
break;
.flags = PHY_HAS_INTERRUPT,
.probe = dp83640_probe,
.remove = dp83640_remove,
+ .config_init = dp83640_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = dp83640_ack_interrupt,
}
static const struct of_device_id sun4i_mdio_dt_ids[] = {
+ { .compatible = "allwinner,sun4i-a10-mdio" },
+
+ /* Deprecated */
{ .compatible = "allwinner,sun4i-mdio" },
{ }
};
static int genphy_config_advert(struct phy_device *phydev)
{
u32 advertise;
- int oldadv, adv;
+ int oldadv, adv, bmsr;
int err, changed = 0;
/* Only allow advertising what this PHY supports */
changed = 1;
}
+ bmsr = phy_read(phydev, MII_BMSR);
+ if (bmsr < 0)
+ return bmsr;
+
+ /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all
+ * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a
+ * logical 1.
+ */
+ if (!(bmsr & BMSR_ESTATEN))
+ return changed;
+
/* Configure gigabit if it's supported */
+ adv = phy_read(phydev, MII_CTRL1000);
+ if (adv < 0)
+ return adv;
+
+ oldadv = adv;
+ adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+
if (phydev->supported & (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full)) {
- adv = phy_read(phydev, MII_CTRL1000);
- if (adv < 0)
- return adv;
-
- oldadv = adv;
- adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
adv |= ethtool_adv_to_mii_ctrl1000_t(advertise);
-
- if (adv != oldadv) {
- err = phy_write(phydev, MII_CTRL1000, adv);
-
- if (err < 0)
- return err;
+ if (adv != oldadv)
changed = 1;
- }
}
+ err = phy_write(phydev, MII_CTRL1000, adv);
+ if (err < 0)
+ return err;
+
return changed;
}
This option adds support for CoreChip-sz SR9700 based USB 1.1
10/100 Ethernet adapters.
+config USB_NET_SR9800
+ tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices"
+ depends on USB_USBNET
+ select CRC32
+ default y
+ ---help---
+ Say Y if you want to use one of the following 100Mbps USB Ethernet
+ device based on the CoreChip-sz SR9800 chip.
+
+ This driver makes the adapter appear as a normal Ethernet interface,
+ typically on eth0, if it is the only ethernet device, or perhaps on
+ eth1, if you have a PCI or ISA ethernet card installed.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sr9800.
+
config USB_NET_SMSC75XX
tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
depends on USB_USBNET
obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
obj-$(CONFIG_USB_NET_SR9700) += sr9700.o
+obj-$(CONFIG_USB_NET_SR9800) += sr9800.o
obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o
obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
struct hso_serial *serial = urb->context;
int status = urb->status;
+ D4("\n--- Got serial_read_bulk callback %02x ---", status);
+
/* sanity check */
if (!serial) {
D1("serial == NULL");
return;
- } else if (status) {
+ }
+ if (status) {
handle_usb_error(status, __func__, serial->parent);
return;
}
- D4("\n--- Got serial_read_bulk callback %02x ---", status);
D1("Actual length = %d\n", urb->actual_length);
DUMP1(urb->transfer_buffer, urb->actual_length);
if (serial->port.count == 0)
return;
- if (status == 0) {
- if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
- fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
- /* Valid data, handle RX data */
- spin_lock(&serial->serial_lock);
- serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
- put_rxbuf_data_and_resubmit_bulk_urb(serial);
- spin_unlock(&serial->serial_lock);
- } else if (status == -ENOENT || status == -ECONNRESET) {
- /* Unlinked - check for throttled port. */
- D2("Port %d, successfully unlinked urb", serial->minor);
- spin_lock(&serial->serial_lock);
- serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
- hso_resubmit_rx_bulk_urb(serial, urb);
- spin_unlock(&serial->serial_lock);
- } else {
- D2("Port %d, status = %d for read urb", serial->minor, status);
- return;
- }
+ if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
+ fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
+ /* Valid data, handle RX data */
+ spin_lock(&serial->serial_lock);
+ serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
+ put_rxbuf_data_and_resubmit_bulk_urb(serial);
+ spin_unlock(&serial->serial_lock);
}
/*
{QMI_FIXED_INTF(0x19d2, 0x1255, 3)},
{QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
{QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
+ {QMI_FIXED_INTF(0x19d2, 0x1270, 5)}, /* ZTE MF667 */
{QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
{QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */
{QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
{QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */
{QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */
{QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */
+ {QMI_FIXED_INTF(0x1199, 0x9051, 8)}, /* Netgear AirCard 340U */
{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
{QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */
{QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */
struct r8152 *tp = netdev_priv(netdev);
int res = 0;
+ rtl8152_set_speed(tp, AUTONEG_ENABLE,
+ tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
+ DUPLEX_FULL);
+ tp->speed = 0;
+ netif_carrier_off(netdev);
+ netif_start_queue(netdev);
+ set_bit(WORK_ENABLE, &tp->flags);
res = usb_submit_urb(tp->intr_urb, GFP_KERNEL);
if (res) {
if (res == -ENODEV)
netif_device_detach(tp->netdev);
netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n",
res);
- return res;
}
- rtl8152_set_speed(tp, AUTONEG_ENABLE,
- tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
- DUPLEX_FULL);
- tp->speed = 0;
- netif_carrier_off(netdev);
- netif_start_queue(netdev);
- set_bit(WORK_ENABLE, &tp->flags);
return res;
}
struct r8152 *tp = netdev_priv(netdev);
int res = 0;
- usb_kill_urb(tp->intr_urb);
clear_bit(WORK_ENABLE, &tp->flags);
+ usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
netif_stop_queue(netdev);
tasklet_disable(&tp->tl);
--- /dev/null
+/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * Based on asix_common.c, asix_devices.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.*
+ */
+
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+#include <linux/slab.h>
+#include <linux/if_vlan.h>
+
+#include "sr9800.h"
+
+static int sr_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ int err;
+
+ err = usbnet_read_cmd(dev, cmd, SR_REQ_RD_REG, value, index,
+ data, size);
+ if ((err != size) && (err >= 0))
+ err = -EINVAL;
+
+ return err;
+}
+
+static int sr_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ int err;
+
+ err = usbnet_write_cmd(dev, cmd, SR_REQ_WR_REG, value, index,
+ data, size);
+ if ((err != size) && (err >= 0))
+ err = -EINVAL;
+
+ return err;
+}
+
+static void
+sr_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+ u16 size, void *data)
+{
+ usbnet_write_cmd_async(dev, cmd, SR_REQ_WR_REG, value, index, data,
+ size);
+}
+
+static int sr_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ int offset = 0;
+
+ while (offset + sizeof(u32) < skb->len) {
+ struct sk_buff *sr_skb;
+ u16 size;
+ u32 header = get_unaligned_le32(skb->data + offset);
+
+ offset += sizeof(u32);
+ /* get the packet length */
+ size = (u16) (header & 0x7ff);
+ if (size != ((~header >> 16) & 0x07ff)) {
+ netdev_err(dev->net, "%s : Bad Header Length\n",
+ __func__);
+ return 0;
+ }
+
+ if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) ||
+ (size + offset > skb->len)) {
+ netdev_err(dev->net, "%s : Bad RX Length %d\n",
+ __func__, size);
+ return 0;
+ }
+ sr_skb = netdev_alloc_skb_ip_align(dev->net, size);
+ if (!sr_skb)
+ return 0;
+
+ skb_put(sr_skb, size);
+ memcpy(sr_skb->data, skb->data + offset, size);
+ usbnet_skb_return(dev, sr_skb);
+
+ offset += (size + 1) & 0xfffe;
+ }
+
+ if (skb->len != offset) {
+ netdev_err(dev->net, "%s : Bad SKB Length %d\n", __func__,
+ skb->len);
+ return 0;
+ }
+
+ return 1;
+}
+
+static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ gfp_t flags)
+{
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+ u32 padbytes = 0xffff0000;
+ u32 packet_len;
+ int padlen;
+
+ padlen = ((skb->len + 4) % (dev->maxpacket - 1)) ? 0 : 4;
+
+ if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) {
+ if ((headroom < 4) || (tailroom < padlen)) {
+ skb->data = memmove(skb->head + 4, skb->data,
+ skb->len);
+ skb_set_tail_pointer(skb, skb->len);
+ }
+ } else {
+ struct sk_buff *skb2;
+ skb2 = skb_copy_expand(skb, 4, padlen, flags);
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+ if (!skb)
+ return NULL;
+ }
+
+ skb_push(skb, 4);
+ packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4);
+ cpu_to_le32s(&packet_len);
+ skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len));
+
+ if (padlen) {
+ cpu_to_le32s(&padbytes);
+ memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes));
+ skb_put(skb, sizeof(padbytes));
+ }
+
+ return skb;
+}
+
+static void sr_status(struct usbnet *dev, struct urb *urb)
+{
+ struct sr9800_int_data *event;
+ int link;
+
+ if (urb->actual_length < 8)
+ return;
+
+ event = urb->transfer_buffer;
+ link = event->link & 0x01;
+ if (netif_carrier_ok(dev->net) != link) {
+ usbnet_link_change(dev, link, 1);
+ netdev_dbg(dev->net, "Link Status is: %d\n", link);
+ }
+
+ return;
+}
+
+static inline int sr_set_sw_mii(struct usbnet *dev)
+{
+ int ret;
+
+ ret = sr_write_cmd(dev, SR_CMD_SET_SW_MII, 0x0000, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net, "Failed to enable software MII access\n");
+ return ret;
+}
+
+static inline int sr_set_hw_mii(struct usbnet *dev)
+{
+ int ret;
+
+ ret = sr_write_cmd(dev, SR_CMD_SET_HW_MII, 0x0000, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net, "Failed to enable hardware MII access\n");
+ return ret;
+}
+
+static inline int sr_get_phy_addr(struct usbnet *dev)
+{
+ u8 buf[2];
+ int ret;
+
+ ret = sr_read_cmd(dev, SR_CMD_READ_PHY_ID, 0, 0, 2, buf);
+ if (ret < 0) {
+ netdev_err(dev->net, "%s : Error reading PHYID register:%02x\n",
+ __func__, ret);
+ goto out;
+ }
+ netdev_dbg(dev->net, "%s : returning 0x%04x\n", __func__,
+ *((__le16 *)buf));
+
+ ret = buf[1];
+
+out:
+ return ret;
+}
+
+static int sr_sw_reset(struct usbnet *dev, u8 flags)
+{
+ int ret;
+
+ ret = sr_write_cmd(dev, SR_CMD_SW_RESET, flags, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net, "Failed to send software reset:%02x\n",
+ ret);
+
+ return ret;
+}
+
+static u16 sr_read_rx_ctl(struct usbnet *dev)
+{
+ __le16 v;
+ int ret;
+
+ ret = sr_read_cmd(dev, SR_CMD_READ_RX_CTL, 0, 0, 2, &v);
+ if (ret < 0) {
+ netdev_err(dev->net, "Error reading RX_CTL register:%02x\n",
+ ret);
+ goto out;
+ }
+
+ ret = le16_to_cpu(v);
+out:
+ return ret;
+}
+
+static int sr_write_rx_ctl(struct usbnet *dev, u16 mode)
+{
+ int ret;
+
+ netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
+ ret = sr_write_cmd(dev, SR_CMD_WRITE_RX_CTL, mode, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net,
+ "Failed to write RX_CTL mode to 0x%04x:%02x\n",
+ mode, ret);
+
+ return ret;
+}
+
+static u16 sr_read_medium_status(struct usbnet *dev)
+{
+ __le16 v;
+ int ret;
+
+ ret = sr_read_cmd(dev, SR_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v);
+ if (ret < 0) {
+ netdev_err(dev->net,
+ "Error reading Medium Status register:%02x\n", ret);
+ return ret; /* TODO: callers not checking for error ret */
+ }
+
+ return le16_to_cpu(v);
+}
+
+static int sr_write_medium_mode(struct usbnet *dev, u16 mode)
+{
+ int ret;
+
+ netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode);
+ ret = sr_write_cmd(dev, SR_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net,
+ "Failed to write Medium Mode mode to 0x%04x:%02x\n",
+ mode, ret);
+ return ret;
+}
+
+static int sr_write_gpio(struct usbnet *dev, u16 value, int sleep)
+{
+ int ret;
+
+ netdev_dbg(dev->net, "%s : value = 0x%04x\n", __func__, value);
+ ret = sr_write_cmd(dev, SR_CMD_WRITE_GPIOS, value, 0, 0, NULL);
+ if (ret < 0)
+ netdev_err(dev->net, "Failed to write GPIO value 0x%04x:%02x\n",
+ value, ret);
+ if (sleep)
+ msleep(sleep);
+
+ return ret;
+}
+
+/* SR9800 have a 16-bit RX_CTL value */
+static void sr_set_multicast(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct sr_data *data = (struct sr_data *)&dev->data;
+ u16 rx_ctl = SR_DEFAULT_RX_CTL;
+
+ if (net->flags & IFF_PROMISC) {
+ rx_ctl |= SR_RX_CTL_PRO;
+ } else if (net->flags & IFF_ALLMULTI ||
+ netdev_mc_count(net) > SR_MAX_MCAST) {
+ rx_ctl |= SR_RX_CTL_AMALL;
+ } else if (netdev_mc_empty(net)) {
+ /* just broadcast and directed */
+ } else {
+ /* We use the 20 byte dev->data
+ * for our 8 byte filter buffer
+ * to avoid allocating memory that
+ * is tricky to free later
+ */
+ struct netdev_hw_addr *ha;
+ u32 crc_bits;
+
+ memset(data->multi_filter, 0, SR_MCAST_FILTER_SIZE);
+
+ /* Build the multicast hash filter. */
+ netdev_for_each_mc_addr(ha, net) {
+ crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+ data->multi_filter[crc_bits >> 3] |=
+ 1 << (crc_bits & 7);
+ }
+
+ sr_write_cmd_async(dev, SR_CMD_WRITE_MULTI_FILTER, 0, 0,
+ SR_MCAST_FILTER_SIZE, data->multi_filter);
+
+ rx_ctl |= SR_RX_CTL_AM;
+ }
+
+ sr_write_cmd_async(dev, SR_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int sr_mdio_read(struct net_device *net, int phy_id, int loc)
+{
+ struct usbnet *dev = netdev_priv(net);
+ __le16 res;
+
+ mutex_lock(&dev->phy_mutex);
+ sr_set_sw_mii(dev);
+ sr_read_cmd(dev, SR_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res);
+ sr_set_hw_mii(dev);
+ mutex_unlock(&dev->phy_mutex);
+
+ netdev_dbg(dev->net,
+ "%s : phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", __func__,
+ phy_id, loc, le16_to_cpu(res));
+
+ return le16_to_cpu(res);
+}
+
+static void
+sr_mdio_write(struct net_device *net, int phy_id, int loc, int val)
+{
+ struct usbnet *dev = netdev_priv(net);
+ __le16 res = cpu_to_le16(val);
+
+ netdev_dbg(dev->net,
+ "%s : phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", __func__,
+ phy_id, loc, val);
+ mutex_lock(&dev->phy_mutex);
+ sr_set_sw_mii(dev);
+ sr_write_cmd(dev, SR_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res);
+ sr_set_hw_mii(dev);
+ mutex_unlock(&dev->phy_mutex);
+}
+
+/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */
+static u32 sr_get_phyid(struct usbnet *dev)
+{
+ int phy_reg;
+ u32 phy_id;
+ int i;
+
+ /* Poll for the rare case the FW or phy isn't ready yet. */
+ for (i = 0; i < 100; i++) {
+ phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1);
+ if (phy_reg != 0 && phy_reg != 0xFFFF)
+ break;
+ mdelay(1);
+ }
+
+ if (phy_reg <= 0 || phy_reg == 0xFFFF)
+ return 0;
+
+ phy_id = (phy_reg & 0xffff) << 16;
+
+ phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2);
+ if (phy_reg < 0)
+ return 0;
+
+ phy_id |= (phy_reg & 0xffff);
+
+ return phy_id;
+}
+
+static void
+sr_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt;
+
+ if (sr_read_cmd(dev, SR_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) {
+ wolinfo->supported = 0;
+ wolinfo->wolopts = 0;
+ return;
+ }
+ wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+ wolinfo->wolopts = 0;
+ if (opt & SR_MONITOR_LINK)
+ wolinfo->wolopts |= WAKE_PHY;
+ if (opt & SR_MONITOR_MAGIC)
+ wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+static int
+sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+ struct usbnet *dev = netdev_priv(net);
+ u8 opt = 0;
+
+ if (wolinfo->wolopts & WAKE_PHY)
+ opt |= SR_MONITOR_LINK;
+ if (wolinfo->wolopts & WAKE_MAGIC)
+ opt |= SR_MONITOR_MAGIC;
+
+ if (sr_write_cmd(dev, SR_CMD_WRITE_MONITOR_MODE,
+ opt, 0, 0, NULL) < 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int sr_get_eeprom_len(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct sr_data *data = (struct sr_data *)&dev->data;
+
+ return data->eeprom_len;
+}
+
+static int sr_get_eeprom(struct net_device *net,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct usbnet *dev = netdev_priv(net);
+ __le16 *ebuf = (__le16 *)data;
+ int ret;
+ int i;
+
+ /* Crude hack to ensure that we don't overwrite memory
+ * if an odd length is supplied
+ */
+ if (eeprom->len % 2)
+ return -EINVAL;
+
+ eeprom->magic = SR_EEPROM_MAGIC;
+
+ /* sr9800 returns 2 bytes from eeprom on read */
+ for (i = 0; i < eeprom->len / 2; i++) {
+ ret = sr_read_cmd(dev, SR_CMD_READ_EEPROM, eeprom->offset + i,
+ 0, 2, &ebuf[i]);
+ if (ret < 0)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void sr_get_drvinfo(struct net_device *net,
+ struct ethtool_drvinfo *info)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct sr_data *data = (struct sr_data *)&dev->data;
+
+ /* Inherit standard device info */
+ usbnet_get_drvinfo(net, info);
+ strncpy(info->driver, DRIVER_NAME, sizeof(info->driver));
+ strncpy(info->version, DRIVER_VERSION, sizeof(info->version));
+ info->eedump_len = data->eeprom_len;
+}
+
+static u32 sr_get_link(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return mii_link_ok(&dev->mii);
+}
+
+static int sr_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static int sr_set_mac_address(struct net_device *net, void *p)
+{
+ struct usbnet *dev = netdev_priv(net);
+ struct sr_data *data = (struct sr_data *)&dev->data;
+ struct sockaddr *addr = p;
+
+ if (netif_running(net))
+ return -EBUSY;
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+ /* We use the 20 byte dev->data
+ * for our 6 byte mac buffer
+ * to avoid allocating memory that
+ * is tricky to free later
+ */
+ memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+ sr_write_cmd_async(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+ data->mac_addr);
+
+ return 0;
+}
+
+static const struct ethtool_ops sr9800_ethtool_ops = {
+ .get_drvinfo = sr_get_drvinfo,
+ .get_link = sr_get_link,
+ .get_msglevel = usbnet_get_msglevel,
+ .set_msglevel = usbnet_set_msglevel,
+ .get_wol = sr_get_wol,
+ .set_wol = sr_set_wol,
+ .get_eeprom_len = sr_get_eeprom_len,
+ .get_eeprom = sr_get_eeprom,
+ .get_settings = usbnet_get_settings,
+ .set_settings = usbnet_set_settings,
+ .nway_reset = usbnet_nway_reset,
+};
+
+static int sr9800_link_reset(struct usbnet *dev)
+{
+ struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
+ u16 mode;
+
+ mii_check_media(&dev->mii, 1, 1);
+ mii_ethtool_gset(&dev->mii, &ecmd);
+ mode = SR9800_MEDIUM_DEFAULT;
+
+ if (ethtool_cmd_speed(&ecmd) != SPEED_100)
+ mode &= ~SR_MEDIUM_PS;
+
+ if (ecmd.duplex != DUPLEX_FULL)
+ mode &= ~SR_MEDIUM_FD;
+
+ netdev_dbg(dev->net, "%s : speed: %u duplex: %d mode: 0x%04x\n",
+ __func__, ethtool_cmd_speed(&ecmd), ecmd.duplex, mode);
+
+ sr_write_medium_mode(dev, mode);
+
+ return 0;
+}
+
+
+static int sr9800_set_default_mode(struct usbnet *dev)
+{
+ u16 rx_ctl;
+ int ret;
+
+ sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
+ sr_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
+ ADVERTISE_ALL | ADVERTISE_CSMA);
+ mii_nway_restart(&dev->mii);
+
+ ret = sr_write_medium_mode(dev, SR9800_MEDIUM_DEFAULT);
+ if (ret < 0)
+ goto out;
+
+ ret = sr_write_cmd(dev, SR_CMD_WRITE_IPG012,
+ SR9800_IPG0_DEFAULT | SR9800_IPG1_DEFAULT,
+ SR9800_IPG2_DEFAULT, 0, NULL);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret);
+ goto out;
+ }
+
+ /* Set RX_CTL to default values with 2k buffer, and enable cactus */
+ ret = sr_write_rx_ctl(dev, SR_DEFAULT_RX_CTL);
+ if (ret < 0)
+ goto out;
+
+ rx_ctl = sr_read_rx_ctl(dev);
+ netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n",
+ rx_ctl);
+
+ rx_ctl = sr_read_medium_status(dev);
+ netdev_dbg(dev->net, "Medium Status:0x%04x after all initializations\n",
+ rx_ctl);
+
+ return 0;
+out:
+ return ret;
+}
+
+static int sr9800_reset(struct usbnet *dev)
+{
+ struct sr_data *data = (struct sr_data *)&dev->data;
+ int ret, embd_phy;
+ u16 rx_ctl;
+
+ ret = sr_write_gpio(dev,
+ SR_GPIO_RSE | SR_GPIO_GPO_2 | SR_GPIO_GPO2EN, 5);
+ if (ret < 0)
+ goto out;
+
+ embd_phy = ((sr_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
+
+ ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+ goto out;
+ }
+
+ ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_PRL);
+ if (ret < 0)
+ goto out;
+
+ msleep(150);
+
+ ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
+ if (ret < 0)
+ goto out;
+
+ msleep(150);
+
+ if (embd_phy) {
+ ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+ if (ret < 0)
+ goto out;
+ } else {
+ ret = sr_sw_reset(dev, SR_SWRESET_PRTE);
+ if (ret < 0)
+ goto out;
+ }
+
+ msleep(150);
+ rx_ctl = sr_read_rx_ctl(dev);
+ netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+ ret = sr_write_rx_ctl(dev, 0x0000);
+ if (ret < 0)
+ goto out;
+
+ rx_ctl = sr_read_rx_ctl(dev);
+ netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+ ret = sr_sw_reset(dev, SR_SWRESET_PRL);
+ if (ret < 0)
+ goto out;
+
+ msleep(150);
+
+ ret = sr_sw_reset(dev, SR_SWRESET_IPRL | SR_SWRESET_PRL);
+ if (ret < 0)
+ goto out;
+
+ msleep(150);
+
+ ret = sr9800_set_default_mode(dev);
+ if (ret < 0)
+ goto out;
+
+ /* Rewrite MAC address */
+ memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN);
+ ret = sr_write_cmd(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+ data->mac_addr);
+ if (ret < 0)
+ goto out;
+
+ return 0;
+
+out:
+ return ret;
+}
+
+static const struct net_device_ops sr9800_netdev_ops = {
+ .ndo_open = usbnet_open,
+ .ndo_stop = usbnet_stop,
+ .ndo_start_xmit = usbnet_start_xmit,
+ .ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_change_mtu = usbnet_change_mtu,
+ .ndo_set_mac_address = sr_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = sr_ioctl,
+ .ndo_set_rx_mode = sr_set_multicast,
+};
+
+static int sr9800_phy_powerup(struct usbnet *dev)
+{
+ int ret;
+
+ /* set the embedded Ethernet PHY in power-down state */
+ ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_IPRL);
+ if (ret < 0) {
+ netdev_err(dev->net, "Failed to power down PHY : %d\n", ret);
+ return ret;
+ }
+ msleep(20);
+
+ /* set the embedded Ethernet PHY in power-up state */
+ ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+ if (ret < 0) {
+ netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
+ return ret;
+ }
+ msleep(600);
+
+ /* set the embedded Ethernet PHY in reset state */
+ ret = sr_sw_reset(dev, SR_SWRESET_CLEAR);
+ if (ret < 0) {
+ netdev_err(dev->net, "Failed to power up PHY: %d\n", ret);
+ return ret;
+ }
+ msleep(20);
+
+ /* set the embedded Ethernet PHY in power-up state */
+ ret = sr_sw_reset(dev, SR_SWRESET_IPRL);
+ if (ret < 0) {
+ netdev_err(dev->net, "Failed to reset PHY: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ struct sr_data *data = (struct sr_data *)&dev->data;
+ u16 led01_mux, led23_mux;
+ int ret, embd_phy;
+ u32 phyid;
+ u16 rx_ctl;
+
+ data->eeprom_len = SR9800_EEPROM_LEN;
+
+ usbnet_get_endpoints(dev, intf);
+
+ /* LED Setting Rule :
+ * AABB:CCDD
+ * AA : MFA0(LED0)
+ * BB : MFA1(LED1)
+ * CC : MFA2(LED2), Reserved for SR9800
+ * DD : MFA3(LED3), Reserved for SR9800
+ */
+ led01_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_LINK;
+ led23_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_TX_ACTIVE;
+ ret = sr_write_cmd(dev, SR_CMD_LED_MUX, led01_mux, led23_mux, 0, NULL);
+ if (ret < 0) {
+ netdev_err(dev->net, "set LINK LED failed : %d\n", ret);
+ goto out;
+ }
+
+ /* Get the MAC address */
+ ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN,
+ dev->net->dev_addr);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret);
+ return ret;
+ }
+ netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr);
+
+ /* Initialize MII structure */
+ dev->mii.dev = dev->net;
+ dev->mii.mdio_read = sr_mdio_read;
+ dev->mii.mdio_write = sr_mdio_write;
+ dev->mii.phy_id_mask = 0x1f;
+ dev->mii.reg_num_mask = 0x1f;
+ dev->mii.phy_id = sr_get_phy_addr(dev);
+
+ dev->net->netdev_ops = &sr9800_netdev_ops;
+ dev->net->ethtool_ops = &sr9800_ethtool_ops;
+
+ embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0);
+ /* Reset the PHY to normal operation mode */
+ ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL);
+ if (ret < 0) {
+ netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret);
+ return ret;
+ }
+
+ /* Init PHY routine */
+ ret = sr9800_phy_powerup(dev);
+ if (ret < 0)
+ goto out;
+
+ rx_ctl = sr_read_rx_ctl(dev);
+ netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl);
+ ret = sr_write_rx_ctl(dev, 0x0000);
+ if (ret < 0)
+ goto out;
+
+ rx_ctl = sr_read_rx_ctl(dev);
+ netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl);
+
+ /* Read PHYID register *AFTER* the PHY was reset properly */
+ phyid = sr_get_phyid(dev);
+ netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid);
+
+ /* medium mode setting */
+ ret = sr9800_set_default_mode(dev);
+ if (ret < 0)
+ goto out;
+
+ if (dev->udev->speed == USB_SPEED_HIGH) {
+ ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].byte_cnt,
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].threshold,
+ 0, NULL);
+ if (ret < 0) {
+ netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
+ goto out;
+ }
+ dev->rx_urb_size =
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].size;
+ } else {
+ ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE,
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].byte_cnt,
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].threshold,
+ 0, NULL);
+ if (ret < 0) {
+ netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret);
+ goto out;
+ }
+ dev->rx_urb_size =
+ SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].size;
+ }
+ netdev_dbg(dev->net, "%s : setting rx_urb_size with : %ld\n", __func__,
+ dev->rx_urb_size);
+ return 0;
+
+out:
+ return ret;
+}
+
+static const struct driver_info sr9800_driver_info = {
+ .description = "CoreChip SR9800 USB 2.0 Ethernet",
+ .bind = sr9800_bind,
+ .status = sr_status,
+ .link_reset = sr9800_link_reset,
+ .reset = sr9800_reset,
+ .flags = DRIVER_FLAG,
+ .rx_fixup = sr_rx_fixup,
+ .tx_fixup = sr_tx_fixup,
+};
+
+static const struct usb_device_id products[] = {
+ {
+ USB_DEVICE(0x0fe6, 0x9800), /* SR9800 Device */
+ .driver_info = (unsigned long) &sr9800_driver_info,
+ },
+ {}, /* END */
+};
+
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver sr_driver = {
+ .name = DRIVER_NAME,
+ .id_table = products,
+ .probe = usbnet_probe,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+ .disconnect = usbnet_disconnect,
+ .supports_autosuspend = 1,
+};
+
+module_usb_driver(sr_driver);
+
+MODULE_AUTHOR("Liu Junliang <liujunliang_ljl@163.com");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_DESCRIPTION("SR9800 USB 2.0 USB2NET Dev : http://www.corechip-sz.com");
+MODULE_LICENSE("GPL");
--- /dev/null
+/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices
+ *
+ * Author : Liu Junliang <liujunliang_ljl@163.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef _SR9800_H
+#define _SR9800_H
+
+/* SR9800 spec. command table on Linux Platform */
+
+/* command : Software Station Management Control Reg */
+#define SR_CMD_SET_SW_MII 0x06
+/* command : PHY Read Reg */
+#define SR_CMD_READ_MII_REG 0x07
+/* command : PHY Write Reg */
+#define SR_CMD_WRITE_MII_REG 0x08
+/* command : Hardware Station Management Control Reg */
+#define SR_CMD_SET_HW_MII 0x0a
+/* command : SROM Read Reg */
+#define SR_CMD_READ_EEPROM 0x0b
+/* command : SROM Write Reg */
+#define SR_CMD_WRITE_EEPROM 0x0c
+/* command : SROM Write Enable Reg */
+#define SR_CMD_WRITE_ENABLE 0x0d
+/* command : SROM Write Disable Reg */
+#define SR_CMD_WRITE_DISABLE 0x0e
+/* command : RX Control Read Reg */
+#define SR_CMD_READ_RX_CTL 0x0f
+#define SR_RX_CTL_PRO (1 << 0)
+#define SR_RX_CTL_AMALL (1 << 1)
+#define SR_RX_CTL_SEP (1 << 2)
+#define SR_RX_CTL_AB (1 << 3)
+#define SR_RX_CTL_AM (1 << 4)
+#define SR_RX_CTL_AP (1 << 5)
+#define SR_RX_CTL_ARP (1 << 6)
+#define SR_RX_CTL_SO (1 << 7)
+#define SR_RX_CTL_RH1M (1 << 8)
+#define SR_RX_CTL_RH2M (1 << 9)
+#define SR_RX_CTL_RH3M (1 << 10)
+/* command : RX Control Write Reg */
+#define SR_CMD_WRITE_RX_CTL 0x10
+/* command : IPG0/IPG1/IPG2 Control Read Reg */
+#define SR_CMD_READ_IPG012 0x11
+/* command : IPG0/IPG1/IPG2 Control Write Reg */
+#define SR_CMD_WRITE_IPG012 0x12
+/* command : Node ID Read Reg */
+#define SR_CMD_READ_NODE_ID 0x13
+/* command : Node ID Write Reg */
+#define SR_CMD_WRITE_NODE_ID 0x14
+/* command : Multicast Filter Array Read Reg */
+#define SR_CMD_READ_MULTI_FILTER 0x15
+/* command : Multicast Filter Array Write Reg */
+#define SR_CMD_WRITE_MULTI_FILTER 0x16
+/* command : Eth/HomePNA PHY Address Reg */
+#define SR_CMD_READ_PHY_ID 0x19
+/* command : Medium Status Read Reg */
+#define SR_CMD_READ_MEDIUM_STATUS 0x1a
+#define SR_MONITOR_LINK (1 << 1)
+#define SR_MONITOR_MAGIC (1 << 2)
+#define SR_MONITOR_HSFS (1 << 4)
+/* command : Medium Status Write Reg */
+#define SR_CMD_WRITE_MEDIUM_MODE 0x1b
+#define SR_MEDIUM_GM (1 << 0)
+#define SR_MEDIUM_FD (1 << 1)
+#define SR_MEDIUM_AC (1 << 2)
+#define SR_MEDIUM_ENCK (1 << 3)
+#define SR_MEDIUM_RFC (1 << 4)
+#define SR_MEDIUM_TFC (1 << 5)
+#define SR_MEDIUM_JFE (1 << 6)
+#define SR_MEDIUM_PF (1 << 7)
+#define SR_MEDIUM_RE (1 << 8)
+#define SR_MEDIUM_PS (1 << 9)
+#define SR_MEDIUM_RSV (1 << 10)
+#define SR_MEDIUM_SBP (1 << 11)
+#define SR_MEDIUM_SM (1 << 12)
+/* command : Monitor Mode Status Read Reg */
+#define SR_CMD_READ_MONITOR_MODE 0x1c
+/* command : Monitor Mode Status Write Reg */
+#define SR_CMD_WRITE_MONITOR_MODE 0x1d
+/* command : GPIO Status Read Reg */
+#define SR_CMD_READ_GPIOS 0x1e
+#define SR_GPIO_GPO0EN (1 << 0) /* GPIO0 Output enable */
+#define SR_GPIO_GPO_0 (1 << 1) /* GPIO0 Output value */
+#define SR_GPIO_GPO1EN (1 << 2) /* GPIO1 Output enable */
+#define SR_GPIO_GPO_1 (1 << 3) /* GPIO1 Output value */
+#define SR_GPIO_GPO2EN (1 << 4) /* GPIO2 Output enable */
+#define SR_GPIO_GPO_2 (1 << 5) /* GPIO2 Output value */
+#define SR_GPIO_RESERVED (1 << 6) /* Reserved */
+#define SR_GPIO_RSE (1 << 7) /* Reload serial EEPROM */
+/* command : GPIO Status Write Reg */
+#define SR_CMD_WRITE_GPIOS 0x1f
+/* command : Eth PHY Power and Reset Control Reg */
+#define SR_CMD_SW_RESET 0x20
+#define SR_SWRESET_CLEAR 0x00
+#define SR_SWRESET_RR (1 << 0)
+#define SR_SWRESET_RT (1 << 1)
+#define SR_SWRESET_PRTE (1 << 2)
+#define SR_SWRESET_PRL (1 << 3)
+#define SR_SWRESET_BZ (1 << 4)
+#define SR_SWRESET_IPRL (1 << 5)
+#define SR_SWRESET_IPPD (1 << 6)
+/* command : Software Interface Selection Status Read Reg */
+#define SR_CMD_SW_PHY_STATUS 0x21
+/* command : Software Interface Selection Status Write Reg */
+#define SR_CMD_SW_PHY_SELECT 0x22
+/* command : BULK in Buffer Size Reg */
+#define SR_CMD_BULKIN_SIZE 0x2A
+/* command : LED_MUX Control Reg */
+#define SR_CMD_LED_MUX 0x70
+#define SR_LED_MUX_TX_ACTIVE (1 << 0)
+#define SR_LED_MUX_RX_ACTIVE (1 << 1)
+#define SR_LED_MUX_COLLISION (1 << 2)
+#define SR_LED_MUX_DUP_COL (1 << 3)
+#define SR_LED_MUX_DUP (1 << 4)
+#define SR_LED_MUX_SPEED (1 << 5)
+#define SR_LED_MUX_LINK_ACTIVE (1 << 6)
+#define SR_LED_MUX_LINK (1 << 7)
+
+/* Register Access Flags */
+#define SR_REQ_RD_REG (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+#define SR_REQ_WR_REG (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE)
+
+/* Multicast Filter Array size & Max Number */
+#define SR_MCAST_FILTER_SIZE 8
+#define SR_MAX_MCAST 64
+
+/* IPG0/1/2 Default Value */
+#define SR9800_IPG0_DEFAULT 0x15
+#define SR9800_IPG1_DEFAULT 0x0c
+#define SR9800_IPG2_DEFAULT 0x12
+
+/* Medium Status Default Mode */
+#define SR9800_MEDIUM_DEFAULT \
+ (SR_MEDIUM_FD | SR_MEDIUM_RFC | \
+ SR_MEDIUM_TFC | SR_MEDIUM_PS | \
+ SR_MEDIUM_AC | SR_MEDIUM_RE)
+
+/* RX Control Default Setting */
+#define SR_DEFAULT_RX_CTL \
+ (SR_RX_CTL_SO | SR_RX_CTL_AB | SR_RX_CTL_RH1M)
+
+/* EEPROM Magic Number & EEPROM Size */
+#define SR_EEPROM_MAGIC 0xdeadbeef
+#define SR9800_EEPROM_LEN 0xff
+
+/* SR9800 Driver Version and Driver Name */
+#define DRIVER_VERSION "11-Nov-2013"
+#define DRIVER_NAME "CoreChips"
+#define DRIVER_FLAG \
+ (FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET)
+
+/* SR9800 BULKIN Buffer Size */
+#define SR9800_MAX_BULKIN_2K 0
+#define SR9800_MAX_BULKIN_4K 1
+#define SR9800_MAX_BULKIN_6K 2
+#define SR9800_MAX_BULKIN_8K 3
+#define SR9800_MAX_BULKIN_16K 4
+#define SR9800_MAX_BULKIN_20K 5
+#define SR9800_MAX_BULKIN_24K 6
+#define SR9800_MAX_BULKIN_32K 7
+
+struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = {
+ /* 2k */
+ {2048, 0x8000, 0x8001},
+ /* 4k */
+ {4096, 0x8100, 0x8147},
+ /* 6k */
+ {6144, 0x8200, 0x81EB},
+ /* 8k */
+ {8192, 0x8300, 0x83D7},
+ /* 16 */
+ {16384, 0x8400, 0x851E},
+ /* 20k */
+ {20480, 0x8500, 0x8666},
+ /* 24k */
+ {24576, 0x8600, 0x87AE},
+ /* 32k */
+ {32768, 0x8700, 0x8A3D},
+};
+
+/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
+struct sr_data {
+ u8 multi_filter[SR_MCAST_FILTER_SIZE];
+ u8 mac_addr[ETH_ALEN];
+ u8 phymode;
+ u8 ledmode;
+ u8 eeprom_len;
+};
+
+struct sr9800_int_data {
+ __le16 res1;
+ u8 link;
+ __le16 res2;
+ u8 status;
+ __le16 res3;
+} __packed;
+
+#endif /* _SR9800_H */
/* Look up Ethernet address in forwarding table */
static struct vxlan_fdb *__vxlan_find_mac(struct vxlan_dev *vxlan,
const u8 *mac)
-
{
struct hlist_head *head = vxlan_fdb_head(vxlan, mac);
struct vxlan_fdb *f;
NAPI_GRO_CB(p)->same_flow = 0;
continue;
}
- goto found;
}
-found:
type = eh->h_proto;
rcu_read_lock();
const void *saddr, unsigned len)
{
struct frhdr hdr;
- struct dlci_local *dlp;
unsigned int hlen;
char *dest;
- dlp = netdev_priv(dev);
-
hdr.control = FRAD_I_UI;
switch (type)
{
static void dlci_receive(struct sk_buff *skb, struct net_device *dev)
{
- struct dlci_local *dlp;
struct frhdr *hdr;
int process, header;
- dlp = netdev_priv(dev);
if (!pskb_may_pull(skb, sizeof(*hdr))) {
netdev_notice(dev, "invalid data no header\n");
dev->stats.rx_errors++;
AR5523_DEVICE_UG(0x07d1, 0x3a07), /* D-Link / WUA-2340 rev A1 */
AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */
AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */
- AR5523_DEVICE_UG(0x129b, 0x160c), /* Gigaset / USB stick 108
+ AR5523_DEVICE_UG(0x129b, 0x160b), /* Gigaset / USB stick 108
(CyberTAN Technology) */
AR5523_DEVICE_UG(0x16ab, 0x7801), /* Globalsun / AR5523_1 */
AR5523_DEVICE_UX(0x16ab, 0x7811), /* Globalsun / AR5523_2 */
break;
}
}
+
+ if (is2GHz && !twiceMaxEdgePower)
+ twiceMaxEdgePower = 60;
+
return twiceMaxEdgePower;
}
struct ath9k_htc_sta {
u8 index;
enum tid_aggr_state tid_state[ATH9K_HTC_MAX_TID];
+ struct work_struct rc_update_work;
+ struct ath9k_htc_priv *htc_priv;
};
#define ATH9K_HTC_RXBUF 256
module_param_named(btcoex_enable, ath9k_htc_btcoex_enable, int, 0444);
MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence");
+static int ath9k_ps_enable;
+module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
+MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
+
#define CHAN2G(_freq, _idx) { \
.center_freq = (_freq), \
.hw_value = (_idx), \
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_HAS_RATE_CONTROL |
IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_MFP_CAPABLE |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
+ if (ath9k_ps_enable)
+ hw->flags |= IEEE80211_HW_SUPPORTS_PS;
+
hw->wiphy->interface_modes =
BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_ADHOC) |
mutex_unlock(&priv->mutex);
}
+static void ath9k_htc_sta_rc_update_work(struct work_struct *work)
+{
+ struct ath9k_htc_sta *ista =
+ container_of(work, struct ath9k_htc_sta, rc_update_work);
+ struct ieee80211_sta *sta =
+ container_of((void *)ista, struct ieee80211_sta, drv_priv);
+ struct ath9k_htc_priv *priv = ista->htc_priv;
+ struct ath_common *common = ath9k_hw_common(priv->ah);
+ struct ath9k_htc_target_rate trate;
+
+ mutex_lock(&priv->mutex);
+ ath9k_htc_ps_wakeup(priv);
+
+ memset(&trate, 0, sizeof(struct ath9k_htc_target_rate));
+ ath9k_htc_setup_rate(priv, sta, &trate);
+ if (!ath9k_htc_send_rate_cmd(priv, &trate))
+ ath_dbg(common, CONFIG,
+ "Supported rates for sta: %pM updated, rate caps: 0x%X\n",
+ sta->addr, be32_to_cpu(trate.capflags));
+ else
+ ath_dbg(common, CONFIG,
+ "Unable to update supported rates for sta: %pM\n",
+ sta->addr);
+
+ ath9k_htc_ps_restore(priv);
+ mutex_unlock(&priv->mutex);
+}
+
static int ath9k_htc_sta_add(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_sta *sta)
{
struct ath9k_htc_priv *priv = hw->priv;
+ struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv;
int ret;
mutex_lock(&priv->mutex);
ath9k_htc_ps_wakeup(priv);
ret = ath9k_htc_add_station(priv, vif, sta);
- if (!ret)
+ if (!ret) {
+ INIT_WORK(&ista->rc_update_work, ath9k_htc_sta_rc_update_work);
+ ista->htc_priv = priv;
ath9k_htc_init_rate(priv, sta);
+ }
ath9k_htc_ps_restore(priv);
mutex_unlock(&priv->mutex);
struct ieee80211_sta *sta)
{
struct ath9k_htc_priv *priv = hw->priv;
- struct ath9k_htc_sta *ista;
+ struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv;
int ret;
+ cancel_work_sync(&ista->rc_update_work);
+
mutex_lock(&priv->mutex);
ath9k_htc_ps_wakeup(priv);
- ista = (struct ath9k_htc_sta *) sta->drv_priv;
htc_sta_drain(priv->htc, ista->index);
ret = ath9k_htc_remove_station(priv, vif, sta);
ath9k_htc_ps_restore(priv);
struct ieee80211_vif *vif,
struct ieee80211_sta *sta, u32 changed)
{
- struct ath9k_htc_priv *priv = hw->priv;
- struct ath_common *common = ath9k_hw_common(priv->ah);
- struct ath9k_htc_target_rate trate;
-
- mutex_lock(&priv->mutex);
- ath9k_htc_ps_wakeup(priv);
+ struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv;
- if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) {
- memset(&trate, 0, sizeof(struct ath9k_htc_target_rate));
- ath9k_htc_setup_rate(priv, sta, &trate);
- if (!ath9k_htc_send_rate_cmd(priv, &trate))
- ath_dbg(common, CONFIG,
- "Supported rates for sta: %pM updated, rate caps: 0x%X\n",
- sta->addr, be32_to_cpu(trate.capflags));
- else
- ath_dbg(common, CONFIG,
- "Unable to update supported rates for sta: %pM\n",
- sta->addr);
- }
+ if (!(changed & IEEE80211_RC_SUPP_RATES_CHANGED))
+ return;
- ath9k_htc_ps_restore(priv);
- mutex_unlock(&priv->mutex);
+ schedule_work(&ista->rc_update_work);
}
static int ath9k_htc_conf_tx(struct ieee80211_hw *hw,
if (AR_SREV_9300_20_OR_LATER(ah))
udelay(50);
else if (AR_SREV_9100(ah))
- udelay(10000);
+ mdelay(10);
else
udelay(100);
REG_SET_BIT(ah, AR_RTC_FORCE_WAKE,
AR_RTC_FORCE_WAKE_EN);
-
if (AR_SREV_9100(ah))
- udelay(10000);
+ mdelay(10);
else
udelay(50);
module_param_named(bt_ant_diversity, ath9k_bt_ant_diversity, int, 0444);
MODULE_PARM_DESC(bt_ant_diversity, "Enable WLAN/BT RX antenna diversity");
+static int ath9k_ps_enable;
+module_param_named(ps_enable, ath9k_ps_enable, int, 0444);
+MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave");
+
bool is_ath9k_unloaded;
/* We use the hw_value as an index into our private channel structure */
hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK |
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_SUPPORTS_RC_TABLE |
IEEE80211_HW_SUPPORTS_HT_CCK_RATES;
+ if (ath9k_ps_enable)
+ hw->flags |= IEEE80211_HW_SUPPORTS_PS;
+
if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION;
for (ch_idx = 0; ch_idx < IWL_NUM_CHANNELS; ch_idx++) {
ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx);
+
+ if (ch_idx >= NUM_2GHZ_CHANNELS &&
+ !data->sku_cap_band_52GHz_enable)
+ ch_flags &= ~NVM_CHANNEL_VALID;
+
if (!(ch_flags & NVM_CHANNEL_VALID)) {
IWL_DEBUG_EEPROM(dev,
"Ch. %d Flags %x [%sGHz] - No traffic\n",
* @match_notify: clients waiting for match found notification
* @pass_match: clients waiting for the results
* @active_clients: active clients bitmap - enum scan_framework_client
+ * @any_beacon_notify: clients waiting for match notification without match
*/
struct iwl_scan_offload_profile_cfg {
struct iwl_scan_offload_profile profiles[IWL_SCAN_MAX_PROFILES];
u8 match_notify;
u8 pass_match;
u8 active_clients;
- u8 reserved[3];
+ u8 any_beacon_notify;
+ u8 reserved[2];
} __packed;
/**
else
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
- if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) {
+ if (0 && mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) {
hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN;
hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX;
hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES;
iwl_mvm_scan_fill_ssids(cmd, req, basic_ssid ? 1 : 0);
- cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL);
+ cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL |
+ TX_CMD_FLG_BT_DIS);
cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id;
cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE);
cmd->tx_cmd.rate_n_flags =
profile_cfg->active_clients = SCAN_CLIENT_SCHED_SCAN;
profile_cfg->pass_match = SCAN_CLIENT_SCHED_SCAN;
profile_cfg->match_notify = SCAN_CLIENT_SCHED_SCAN;
+ if (!req->n_match_sets || !req->match_sets[0].ssid.ssid_len)
+ profile_cfg->any_beacon_notify = SCAN_CLIENT_SCHED_SCAN;
for (i = 0; i < req->n_match_sets; i++) {
profile = &profile_cfg->profiles[i];
{
struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif);
static const u8 _baddr[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
- static const u8 *baddr = _baddr;
+ const u8 *baddr = _baddr;
lockdep_assert_held(&mvm->mutex);
rcu_read_lock();
sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]);
+ /*
+ * sta can't be NULL otherwise it'd mean that the sta has been freed in
+ * the firmware while we still have packets for it in the Tx queues.
+ */
+ if (WARN_ON_ONCE(!sta))
+ goto out;
- if (!IS_ERR_OR_NULL(sta)) {
+ if (!IS_ERR(sta)) {
mvmsta = iwl_mvm_sta_from_mac80211(sta);
if (tid != IWL_TID_NON_QOS) {
spin_unlock_bh(&mvmsta->lock);
}
} else {
- sta = NULL;
mvmsta = NULL;
}
* If the txq is not an AMPDU queue, there is no chance we freed
* several skbs. Check that out...
*/
- if (txq_id < mvm->first_agg_queue && !WARN_ON(skb_freed > 1) &&
- atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) {
- if (mvmsta) {
- /*
- * If there are no pending frames for this STA, notify
- * mac80211 that this station can go to sleep in its
- * STA table.
- */
- if (mvmsta->vif->type == NL80211_IFTYPE_AP)
- ieee80211_sta_block_awake(mvm->hw, sta, false);
- /*
- * We might very well have taken mvmsta pointer while
- * the station was being removed. The remove flow might
- * have seen a pending_frame (because we didn't take
- * the lock) even if now the queues are drained. So make
- * really sure now that this the station is not being
- * removed. If it is, run the drain worker to remove it.
- */
- spin_lock_bh(&mvmsta->lock);
- sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]);
- if (!sta || PTR_ERR(sta) == -EBUSY) {
- /*
- * Station disappeared in the meantime:
- * so we are draining.
- */
- set_bit(sta_id, mvm->sta_drained);
- schedule_work(&mvm->sta_drained_wk);
- }
- spin_unlock_bh(&mvmsta->lock);
- } else if (!mvmsta && PTR_ERR(sta) == -EBUSY) {
- /* Tx response without STA, so we are draining */
- set_bit(sta_id, mvm->sta_drained);
- schedule_work(&mvm->sta_drained_wk);
- }
+ if (txq_id >= mvm->first_agg_queue)
+ goto out;
+
+ /* We can't free more than one frame at once on a shared queue */
+ WARN_ON(skb_freed > 1);
+
+ /* If we have still frames from this STA nothing to do here */
+ if (!atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id]))
+ goto out;
+
+ if (mvmsta && mvmsta->vif->type == NL80211_IFTYPE_AP) {
+ /*
+ * If there are no pending frames for this STA, notify
+ * mac80211 that this station can go to sleep in its
+ * STA table.
+ * If mvmsta is not NULL, sta is valid.
+ */
+ ieee80211_sta_block_awake(mvm->hw, sta, false);
+ }
+
+ if (PTR_ERR(sta) == -EBUSY || PTR_ERR(sta) == -ENOENT) {
+ /*
+ * We are draining and this was the last packet - pre_rcu_remove
+ * has been called already. We might be after the
+ * synchronize_net already.
+ * Don't rely on iwl_mvm_rm_sta to see the empty Tx queues.
+ */
+ set_bit(sta_id, mvm->sta_drained);
+ schedule_work(&mvm->sta_drained_wk);
}
+out:
rcu_read_unlock();
}
mvm->status, table.valid);
}
+ IWL_ERR(mvm, "Loaded firmware version: %s\n", mvm->fw->fw_version);
+
trace_iwlwifi_dev_ucode_error(trans->dev, table.error_id, table.tsf_low,
table.data1, table.data2, table.data3,
table.blink1, table.blink2, table.ilink1,
/* 7265 Series */
{IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5110, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x5112, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x5100, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x510A, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5310, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5302, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5210, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5012, iwl7265_2ac_cfg)},
- {IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5410, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5400, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x1010, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5000, iwl7265_2n_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2n_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5200, iwl7265_2n_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x5002, iwl7265_n_cfg)},
{IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x9012, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)},
+ {IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)},
{IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)},
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
+ /*
+ * Disable powersaving as default.
+ */
+ rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
/*
* Initialize hw_mode information.
*/
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK;
+ /*
+ * Disable powersaving as default.
+ */
+ rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
rt2x00_eeprom_addr(rt2x00dev,
u32 reg;
/*
- * Disable powersaving as default on PCI devices.
+ * Disable powersaving as default.
*/
- if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev))
- rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+ rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
/*
* Initialize all hw fields.
struct rtl8180_priv *priv = dev->priv;
unsigned int count = 32;
u8 signal, agc, sq;
+ dma_addr_t mapping;
while (count--) {
struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx];
if (unlikely(!new_skb))
goto done;
+ mapping = pci_map_single(priv->pdev,
+ skb_tail_pointer(new_skb),
+ MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+
+ if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ kfree_skb(new_skb);
+ dev_err(&priv->pdev->dev, "RX DMA map error\n");
+
+ goto done;
+ }
+
pci_unmap_single(priv->pdev,
*((dma_addr_t *)skb->cb),
MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
skb = new_skb;
priv->rx_buf[priv->rx_idx] = skb;
- *((dma_addr_t *) skb->cb) =
- pci_map_single(priv->pdev, skb_tail_pointer(skb),
- MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+ *((dma_addr_t *) skb->cb) = mapping;
}
done:
mapping = pci_map_single(priv->pdev, skb->data,
skb->len, PCI_DMA_TODEVICE);
+ if (pci_dma_mapping_error(priv->pdev, mapping)) {
+ kfree_skb(skb);
+ dev_err(&priv->pdev->dev, "TX DMA mapping error\n");
+ return;
+
+ }
+
tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS |
RTL818X_TX_DESC_FLAG_LS |
(ieee80211_get_tx_rate(dev, info)->hw_value << 24) |
char rx_irq_name[IFNAMSIZ+4]; /* DEVNAME-rx */
struct xen_netif_rx_back_ring rx;
struct sk_buff_head rx_queue;
- bool rx_queue_stopped;
- /* Set when the RX interrupt is triggered by the frontend.
- * The worker thread may need to wake the queue.
- */
- bool rx_event;
+ RING_IDX rx_last_skb_slots;
/* This array is allocated seperately as it is large */
struct gnttab_copy *grant_copy_op;
{
struct xenvif *vif = dev_id;
- vif->rx_event = true;
xenvif_kick_thread(vif);
return IRQ_HANDLED;
unsigned long offset;
struct skb_cb_overlay *sco;
bool need_to_notify = false;
- bool ring_full = false;
struct netrx_pending_operations npo = {
.copy = vif->grant_copy_op,
skb_queue_head_init(&rxq);
while ((skb = skb_dequeue(&vif->rx_queue)) != NULL) {
- int max_slots_needed;
+ RING_IDX max_slots_needed;
int i;
/* We need a cheap worse case estimate for the number of
if (!xenvif_rx_ring_slots_available(vif, max_slots_needed)) {
skb_queue_head(&vif->rx_queue, skb);
need_to_notify = true;
- ring_full = true;
+ vif->rx_last_skb_slots = max_slots_needed;
break;
- }
+ } else
+ vif->rx_last_skb_slots = 0;
sco = (struct skb_cb_overlay *)skb->cb;
sco->meta_slots_used = xenvif_gop_skb(skb, &npo);
BUG_ON(npo.meta_prod > ARRAY_SIZE(vif->meta));
- vif->rx_queue_stopped = !npo.copy_prod && ring_full;
-
if (!npo.copy_prod)
goto done;
static inline int rx_work_todo(struct xenvif *vif)
{
- return (!skb_queue_empty(&vif->rx_queue) && !vif->rx_queue_stopped) ||
- vif->rx_event;
+ return !skb_queue_empty(&vif->rx_queue) &&
+ xenvif_rx_ring_slots_available(vif, vif->rx_last_skb_slots);
}
static inline int tx_work_todo(struct xenvif *vif)
if (!skb_queue_empty(&vif->rx_queue))
xenvif_rx_action(vif);
- vif->rx_event = false;
-
if (skb_queue_empty(&vif->rx_queue) &&
netif_queue_stopped(vif->dev))
xenvif_start_queue(vif);
case XenbusStateReconfiguring:
case XenbusStateReconfigured:
case XenbusStateUnknown:
- case XenbusStateClosed:
break;
case XenbusStateInitWait:
netdev_notify_peers(netdev);
break;
+ case XenbusStateClosed:
+ if (dev->state == XenbusStateClosed)
+ break;
+ /* Missed the backend's CLOSING state -- fallthrough */
case XenbusStateClosing:
xenbus_frontend_closed(dev);
break;
static int of_bus_pci_match(struct device_node *np)
{
/*
+ * "pciex" is PCI Express
* "vci" is for the /chaos bridge on 1st-gen PCI powermacs
* "ht" is hypertransport
*/
- return !strcmp(np->type, "pci") || !strcmp(np->type, "vci") ||
- !strcmp(np->type, "ht");
+ return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex") ||
+ !strcmp(np->type, "vci") || !strcmp(np->type, "ht");
}
static void of_bus_pci_count_cells(struct device_node *np,
}
EXPORT_SYMBOL(of_find_node_with_property);
-static
-const struct of_device_id *__of_match_node(const struct of_device_id *matches,
- const struct device_node *node)
+static const struct of_device_id *
+of_match_compatible(const struct of_device_id *matches,
+ const struct device_node *node)
{
const char *cp;
int cplen, l;
-
- if (!matches)
- return NULL;
+ const struct of_device_id *m;
cp = __of_get_property(node, "compatible", &cplen);
- do {
- const struct of_device_id *m = matches;
-
- /* Check against matches with current compatible string */
+ while (cp && (cplen > 0)) {
+ m = matches;
while (m->name[0] || m->type[0] || m->compatible[0]) {
- int match = 1;
- if (m->name[0])
- match &= node->name
- && !strcmp(m->name, node->name);
- if (m->type[0])
- match &= node->type
- && !strcmp(m->type, node->type);
- if (m->compatible[0])
- match &= cp
- && !of_compat_cmp(m->compatible, cp,
- strlen(m->compatible));
- if (match)
+ /* Only match for the entries without type and name */
+ if (m->name[0] || m->type[0] ||
+ of_compat_cmp(m->compatible, cp,
+ strlen(m->compatible)))
+ m++;
+ else
return m;
- m++;
}
- /* Get node's next compatible string */
- if (cp) {
- l = strlen(cp) + 1;
- cp += l;
- cplen -= l;
- }
- } while (cp && (cplen > 0));
+ /* Get node's next compatible string */
+ l = strlen(cp) + 1;
+ cp += l;
+ cplen -= l;
+ }
+
+ return NULL;
+}
+
+static
+const struct of_device_id *__of_match_node(const struct of_device_id *matches,
+ const struct device_node *node)
+{
+ const struct of_device_id *m;
+ if (!matches)
+ return NULL;
+
+ m = of_match_compatible(matches, node);
+ if (m)
+ return m;
+
+ while (matches->name[0] || matches->type[0] || matches->compatible[0]) {
+ int match = 1;
+ if (matches->name[0])
+ match &= node->name
+ && !strcmp(matches->name, node->name);
+ if (matches->type[0])
+ match &= node->type
+ && !strcmp(matches->type, node->type);
+ if (matches->compatible[0])
+ match &= __of_device_is_compatible(node,
+ matches->compatible);
+ if (match)
+ return matches;
+ matches++;
+ }
return NULL;
}
* @matches: array of of device match structures to search in
* @node: the of device structure to match against
*
- * Low level utility function used by device matching. Matching order
- * is to compare each of the node's compatibles with all given matches
- * first. This implies node's compatible is sorted from specific to
- * generic while matches can be in any order.
+ * Low level utility function used by device matching. We have two ways
+ * of matching:
+ * - Try to find the best compatible match by comparing each compatible
+ * string of device node with all the given matches respectively.
+ * - If the above method failed, then try to match the compatible by using
+ * __of_device_is_compatible() besides the match in type and name.
*/
const struct of_device_id *of_match_node(const struct of_device_id *matches,
const struct device_node *node)
}
}
+static void dock_event(acpi_handle handle, u32 type, void *data)
+{
+ struct acpiphp_context *context;
+
+ mutex_lock(&acpiphp_context_lock);
+ context = acpiphp_get_context(handle);
+ if (!context || WARN_ON(context->handle != handle)
+ || context->func.parent->is_going_away) {
+ mutex_unlock(&acpiphp_context_lock);
+ return;
+ }
+ get_bridge(context->func.parent);
+ acpiphp_put_context(context);
+ mutex_unlock(&acpiphp_context_lock);
+
+ hotplug_event(handle, type, data);
+
+ put_bridge(context->func.parent);
+}
static const struct acpi_dock_ops acpiphp_dock_ops = {
.fixup = post_dock_fixups,
- .handler = hotplug_event,
+ .handler = dock_event,
};
/* Check whether the PCI device is managed by native PCIe hotplug driver */
list_del(&bridge->list);
mutex_unlock(&bridge_mutex);
+ mutex_lock(&acpiphp_context_lock);
bridge->is_going_away = true;
+ mutex_unlock(&acpiphp_context_lock);
}
/**
return (unsigned int)sta;
}
+static inline bool device_status_valid(unsigned int sta)
+{
+ /*
+ * ACPI spec says that _STA may return bit 0 clear with bit 3 set
+ * if the device is valid but does not require a device driver to be
+ * loaded (Section 6.3.7 of ACPI 5.0A).
+ */
+ unsigned int mask = ACPI_STA_DEVICE_ENABLED | ACPI_STA_DEVICE_FUNCTIONING;
+ return (sta & mask) == mask;
+}
+
/**
* trim_stale_devices - remove PCI devices that are not responding.
* @dev: PCI device to start walking the hierarchy from.
unsigned long long sta;
status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
- alive = (ACPI_SUCCESS(status) && sta == ACPI_STA_ALL)
+ alive = (ACPI_SUCCESS(status) && device_status_valid(sta))
|| acpiphp_no_hotplug(handle);
}
if (!alive) {
/* The device is a bridge. so check the bus below it. */
pm_runtime_get_sync(&dev->dev);
- list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
+ list_for_each_entry_safe_reverse(child, tmp, &bus->devices, bus_list)
trim_stale_devices(child);
pm_runtime_put(&dev->dev);
mutex_lock(&slot->crit_sect);
if (slot_no_hotplug(slot)) {
; /* do nothing */
- } else if (get_slot_status(slot) == ACPI_STA_ALL) {
+ } else if (device_status_valid(get_slot_status(slot))) {
/* remove stale devices if any */
- list_for_each_entry_safe(dev, tmp, &bus->devices,
- bus_list)
+ list_for_each_entry_safe_reverse(dev, tmp,
+ &bus->devices, bus_list)
if (PCI_SLOT(dev->devfn) == slot->device)
trim_stale_devices(dev);
int i;
unsigned long type_mask = IORESOURCE_IO | IORESOURCE_MEM;
- list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) {
+ list_for_each_entry_safe_reverse(dev, tmp, &bus->devices, bus_list) {
for (i=0; i<PCI_BRIDGE_RESOURCES; i++) {
struct resource *res = &dev->resource[i];
if ((res->flags & type_mask) && !res->start &&
bridge = acpiphp_handle_to_bridge(handle);
if (bridge) {
+ pci_lock_rescan_remove();
+
acpiphp_check_bridge(bridge);
+
+ pci_unlock_rescan_remove();
put_bridge(bridge);
}
}
mutex_unlock(&acpiphp_context_lock);
+ pci_lock_rescan_remove();
acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
switch (type) {
break;
}
+ pci_unlock_rescan_remove();
if (bridge)
put_bridge(bridge);
}
acpi_handle handle = context->handle;
acpi_scan_lock_acquire();
- pci_lock_rescan_remove();
hotplug_event(handle, type, context);
- pci_unlock_rescan_remove();
acpi_scan_lock_release();
acpi_evaluate_hotplug_ost(handle, type, ACPI_OST_SC_SUCCESS, NULL);
put_bridge(context->func.parent);
{
struct acpiphp_context *context;
u32 ost_code = ACPI_OST_SC_SUCCESS;
+ acpi_status status;
switch (type) {
case ACPI_NOTIFY_BUS_CHECK:
mutex_lock(&acpiphp_context_lock);
context = acpiphp_get_context(handle);
- if (context && !WARN_ON(context->handle != handle)) {
- get_bridge(context->func.parent);
- acpiphp_put_context(context);
- acpi_hotplug_execute(hotplug_event_work, context, type);
+ if (!context || WARN_ON(context->handle != handle)
+ || context->func.parent->is_going_away)
+ goto err_out;
+
+ get_bridge(context->func.parent);
+ acpiphp_put_context(context);
+ status = acpi_hotplug_execute(hotplug_event_work, context, type);
+ if (ACPI_SUCCESS(status)) {
mutex_unlock(&acpiphp_context_lock);
return;
}
+ put_bridge(context->func.parent);
+
+ err_out:
mutex_unlock(&acpiphp_context_lock);
ost_code = ACPI_OST_SC_NON_SPECIFIC_FAILURE;
config PHY_MVEBU_SATA
def_bool y
- depends on ARCH_KIRKWOOD || ARCH_DOVE
+ depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_KIRKWOOD
depends on OF
select GENERIC_PHY
{
int ret;
+ if (!phy)
+ return 0;
+
ret = phy_pm_runtime_get_sync(phy);
if (ret < 0 && ret != -ENOTSUPP)
return ret;
{
int ret;
+ if (!phy)
+ return 0;
+
ret = phy_pm_runtime_get_sync(phy);
if (ret < 0 && ret != -ENOTSUPP)
return ret;
{
int ret;
+ if (!phy)
+ return 0;
+
ret = phy_pm_runtime_get_sync(phy);
if (ret < 0 && ret != -ENOTSUPP)
return ret;
{
int ret;
+ if (!phy)
+ return 0;
+
mutex_lock(&phy->mutex);
if (phy->power_count == 1 && phy->ops->power_off) {
ret = phy->ops->power_off(phy);
*/
void phy_put(struct phy *phy)
{
- if (IS_ERR(phy))
+ if (!phy || IS_ERR(phy))
return;
module_put(phy->ops->owner);
{
int r;
+ if (!phy)
+ return;
+
r = devres_destroy(dev, devm_phy_release, devm_phy_match, phy);
dev_WARN_ONCE(dev, r, "couldn't find PHY resource\n");
}
}
EXPORT_SYMBOL_GPL(phy_get);
+/**
+ * phy_optional_get() - lookup and obtain a reference to an optional phy.
+ * @dev: device that requests this phy
+ * @string: the phy name as given in the dt data or the name of the controller
+ * port for non-dt case
+ *
+ * Returns the phy driver, after getting a refcount to it; or
+ * NULL if there is no such phy. The caller is responsible for
+ * calling phy_put() to release that count.
+ */
+struct phy *phy_optional_get(struct device *dev, const char *string)
+{
+ struct phy *phy = phy_get(dev, string);
+
+ if (PTR_ERR(phy) == -ENODEV)
+ phy = NULL;
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(phy_optional_get);
+
/**
* devm_phy_get() - lookup and obtain a reference to a phy.
* @dev: device that requests this phy
}
EXPORT_SYMBOL_GPL(devm_phy_get);
+/**
+ * devm_phy_optional_get() - lookup and obtain a reference to an optional phy.
+ * @dev: device that requests this phy
+ * @string: the phy name as given in the dt data or phy device name
+ * for non-dt case
+ *
+ * Gets the phy using phy_get(), and associates a device with it using
+ * devres. On driver detach, release function is invoked on the devres
+ * data, then, devres data is freed. This differs to devm_phy_get() in
+ * that if the phy does not exist, it is not considered an error and
+ * -ENODEV will not be returned. Instead the NULL phy is returned,
+ * which can be passed to all other phy consumer calls.
+ */
+struct phy *devm_phy_optional_get(struct device *dev, const char *string)
+{
+ struct phy *phy = devm_phy_get(dev, string);
+
+ if (PTR_ERR(phy) == -ENODEV)
+ phy = NULL;
+
+ return phy;
+}
+EXPORT_SYMBOL_GPL(devm_phy_optional_get);
+
/**
* phy_create() - create a new phy
* @dev: device that is creating the new phy
kref_init(&p->users);
/* Add the pinctrl handle to the global list */
+ mutex_lock(&pinctrl_list_mutex);
list_add_tail(&p->node, &pinctrl_list);
+ mutex_unlock(&pinctrl_list_mutex);
return p;
}
device_root, pctldev, &pinctrl_groups_ops);
debugfs_create_file("gpio-ranges", S_IFREG | S_IRUGO,
device_root, pctldev, &pinctrl_gpioranges_ops);
- pinmux_init_device_debugfs(device_root, pctldev);
- pinconf_init_device_debugfs(device_root, pctldev);
+ if (pctldev->desc->pmxops)
+ pinmux_init_device_debugfs(device_root, pctldev);
+ if (pctldev->desc->confops)
+ pinconf_init_device_debugfs(device_root, pctldev);
}
static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev)
switch (type) {
case IRQ_TYPE_EDGE_RISING:
- irq_set_handler(d->irq, handle_simple_irq);
+ __irq_set_handler_locked(d->irq, handle_simple_irq);
writel_relaxed(mask, pio + PIO_ESR);
writel_relaxed(mask, pio + PIO_REHLSR);
break;
case IRQ_TYPE_EDGE_FALLING:
- irq_set_handler(d->irq, handle_simple_irq);
+ __irq_set_handler_locked(d->irq, handle_simple_irq);
writel_relaxed(mask, pio + PIO_ESR);
writel_relaxed(mask, pio + PIO_FELLSR);
break;
case IRQ_TYPE_LEVEL_LOW:
- irq_set_handler(d->irq, handle_level_irq);
+ __irq_set_handler_locked(d->irq, handle_level_irq);
writel_relaxed(mask, pio + PIO_LSR);
writel_relaxed(mask, pio + PIO_FELLSR);
break;
case IRQ_TYPE_LEVEL_HIGH:
- irq_set_handler(d->irq, handle_level_irq);
+ __irq_set_handler_locked(d->irq, handle_level_irq);
writel_relaxed(mask, pio + PIO_LSR);
writel_relaxed(mask, pio + PIO_REHLSR);
break;
* disable additional interrupt modes:
* fall back to default behavior
*/
- irq_set_handler(d->irq, handle_simple_irq);
+ __irq_set_handler_locked(d->irq, handle_simple_irq);
writel_relaxed(mask, pio + PIO_AIMDR);
return 0;
case IRQ_TYPE_NONE:
#define MX1_DDIR 0x00
#define MX1_OCR 0x04
#define MX1_ICONFA 0x0c
-#define MX1_ICONFB 0x10
+#define MX1_ICONFB 0x14
#define MX1_GIUS 0x20
#define MX1_GPR 0x38
#define MX1_PUEN 0x40
u32 old_val;
u32 new_val;
- dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
- reg, offset, value);
-
/* Use the next register if the pin's port pin number is >=16 */
if (pin_id % 32 >= 16)
reg += 0x04;
+ dev_dbg(ipctl->dev, "write: register 0x%p offset %d value 0x%x\n",
+ reg, offset, value);
+
/* Get current state of pins */
old_val = readl(reg);
old_val &= mask;
u32 reg_offset)
{
void __iomem *reg = imx1_mem(ipctl, pin_id) + reg_offset;
- int offset = pin_id % 16;
+ int offset = (pin_id % 16) * 2;
/* Use the next register if the pin's port pin number is >=16 */
if (pin_id % 32 >= 16)
GFP_KERNEL);
if (!pmx->regs) {
dev_err(&pdev->dev, "Can't alloc regs pointer\n");
- return -ENODEV;
+ return -ENOMEM;
}
for (i = 0; i < pmx->nbanks; i++) {
.funcval = 0,
};
-static const unsigned ac97_pins[] = { 33, 34, 35, 36 };
+static const unsigned ac97_pins[] = { 43, 44, 45, 46 };
static const struct sirfsoc_muxmask spi1_muxmask[] = {
{
if (!configs)
return -ENOMEM;
- configs[0] = pull;
+ switch (pull) {
+ case 0:
+ configs[0] = PIN_CONFIG_BIAS_DISABLE;
+ break;
+ case 1:
+ configs[0] = PIN_CONFIG_BIAS_PULL_DOWN;
+ break;
+ case 2:
+ configs[0] = PIN_CONFIG_BIAS_PULL_UP;
+ break;
+ default:
+ configs[0] = PIN_CONFIG_BIAS_DISABLE;
+ dev_err(data->dev, "invalid pull state %d - disabling\n", pull);
+ }
map->type = PIN_MAP_TYPE_CONFIGS_PIN;
map->data.configs.group_or_pin = data->groups[group];
/*
* Voltage is measured in units of 1.22mV. The voltage is stored as
- * a 10-bit number plus sign, in the upper bits of a 16-bit register
+ * a 12-bit number plus sign, in the upper bits of a 16-bit register
*/
err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
if (err)
ret = PTR_ERR(isp->phy);
goto fail0;
}
- if (!isp->phy)
- goto fail0;
isp->dev = &pdev->dev;
platform_set_drvdata(pdev, isp);
{
struct max17040_chip *chip = i2c_get_clientdata(client);
- if (chip->pdata->battery_online)
+ if (chip->pdata && chip->pdata->battery_online)
chip->online = chip->pdata->battery_online();
else
chip->online = 1;
{
struct max17040_chip *chip = i2c_get_clientdata(client);
- if (!chip->pdata->charger_online || !chip->pdata->charger_enable) {
+ if (!chip->pdata || !chip->pdata->charger_online
+ || !chip->pdata->charger_enable) {
chip->status = POWER_SUPPLY_STATUS_UNKNOWN;
return;
}
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
- depends on POWER_RESET && ARCH_MSM
+ depends on POWER_RESET && ARCH_QCOM
help
Power off and restart support for Qualcomm boards.
/*
- * QNAP Turbo NAS Board power off
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
*
* Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
*
#define UART1_REG(x) (base + ((UART_##x) << 2))
+struct power_off_cfg {
+ u32 baud;
+ char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+ .baud = 19200,
+ .cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+ .baud = 9600,
+ .cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+ { .compatible = "qnap,power-off",
+ .data = &qnap_power_off_cfg,
+ },
+ { .compatible = "synology,power-off",
+ .data = &synology_power_off_cfg,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
static void __iomem *base;
static unsigned long tclk;
+static const struct power_off_cfg *cfg;
static void qnap_power_off(void)
{
- /* 19200 baud divisor */
- const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
+ const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
pr_err("%s: triggering power-off...\n", __func__);
- /* hijack UART1 and reset into sane state (19200,8n1) */
+ /* hijack UART1 and reset into sane state */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
- /* send the power-off command 'A' to PIC */
- writel('A', UART1_REG(TX));
+ /* send the power-off command to PIC */
+ writel(cfg->cmd, UART1_REG(TX));
}
static int qnap_power_off_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
struct resource *res;
struct clk *clk;
char symname[KSYM_NAME_LEN];
+ const struct of_device_id *match =
+ of_match_node(qnap_power_off_of_match_table, np);
+ cfg = match->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Missing resource");
return 0;
}
-static const struct of_device_id qnap_power_off_of_match_table[] = {
- { .compatible = "qnap,power-off", },
- {}
-};
-MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
-
static struct platform_driver qnap_power_off_driver = {
.probe = qnap_power_off_probe,
.remove = qnap_power_off_remove,
struct ab3100_platform_data *plfdata,
struct regulator_init_data *init_data,
struct device_node *np,
- int id)
+ unsigned long id)
{
struct regulator_desc *desc;
struct ab3100_regulator *reg;
err = ab3100_regulator_register(
pdev, NULL, ab3100_regulator_matches[i].init_data,
ab3100_regulator_matches[i].of_node,
- (int) ab3100_regulator_matches[i].driver_data);
+ (unsigned long)ab3100_regulator_matches[i].driver_data);
if (err) {
ab3100_regulators_remove(pdev);
return err;
if (r->dev.parent &&
node == r->dev.of_node)
return r;
+ *ret = -EPROBE_DEFER;
+ return NULL;
} else {
/*
* If we couldn't even get the node then it's
struct regulator_dev *rdev;
struct regulator *regulator = ERR_PTR(-EPROBE_DEFER);
const char *devname = NULL;
- int ret = -EPROBE_DEFER;
+ int ret;
if (id == NULL) {
pr_err("get() with no identifier\n");
if (dev)
devname = dev_name(dev);
+ if (have_full_constraints())
+ ret = -ENODEV;
+ else
+ ret = -EPROBE_DEFER;
+
mutex_lock(®ulator_list_mutex);
rdev = regulator_dev_lookup(dev, id, &ret);
/* Only LDO 5 and 6 has got the over current interrupt */
if (pdev->id == DA9055_ID_LDO5 || pdev->id == DA9055_ID_LDO6) {
irq = platform_get_irq_byname(pdev, "REGULATOR");
- irq = regmap_irq_get_virq(da9055->irq_data, irq);
+ if (irq < 0)
+ return irq;
+
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
da9055_ldo5_6_oc_irq,
IRQF_TRIGGER_HIGH |
MAX14577_REG_MAX);
if (ret < 0) {
dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret);
- return ret;
}
- return 0;
+ of_node_put(np);
+
+ return ret;
}
static inline struct regulator_init_data *match_init_data(int index)
for (i = 0; i < S2MPS11_REGULATOR_MAX; i++) {
if (!reg_np) {
config.init_data = pdata->regulators[i].initdata;
+ config.of_node = pdata->regulators[i].reg_node;
} else {
config.init_data = rdata[i].init_data;
config.of_node = rdata[i].of_node;
via GPIOs or SoC-internal reset controller modules.
If unsure, say no.
+
+source "drivers/reset/sti/Kconfig"
obj-$(CONFIG_RESET_CONTROLLER) += core.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
+obj-$(CONFIG_ARCH_STI) += sti/
* This simple translation function should be used for reset controllers
* with 1:1 mapping, where reset lines can be indexed by number without gaps.
*/
-int of_reset_simple_xlate(struct reset_controller_dev *rcdev,
+static int of_reset_simple_xlate(struct reset_controller_dev *rcdev,
const struct of_phandle_args *reset_spec)
{
if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
return reset_spec->args[0];
}
-EXPORT_SYMBOL_GPL(of_reset_simple_xlate);
/**
* reset_controller_register - register a reset controller device
EXPORT_SYMBOL_GPL(reset_control_deassert);
/**
- * reset_control_get - Lookup and obtain a reference to a reset controller.
- * @dev: device to be reset by the controller
+ * of_reset_control_get - Lookup and obtain a reference to a reset controller.
+ * @node: device to be reset by the controller
* @id: reset line name
*
* Returns a struct reset_control or IS_ERR() condition containing errno.
*
* Use of id names is optional.
*/
-struct reset_control *reset_control_get(struct device *dev, const char *id)
+struct reset_control *of_reset_control_get(struct device_node *node,
+ const char *id)
{
struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
struct reset_controller_dev *r, *rcdev;
int rstc_id;
int ret;
- if (!dev)
- return ERR_PTR(-EINVAL);
-
if (id)
- index = of_property_match_string(dev->of_node,
+ index = of_property_match_string(node,
"reset-names", id);
- ret = of_parse_phandle_with_args(dev->of_node, "resets", "#reset-cells",
+ ret = of_parse_phandle_with_args(node, "resets", "#reset-cells",
index, &args);
if (ret)
return ERR_PTR(ret);
if (!rcdev) {
mutex_unlock(&reset_controller_list_mutex);
- return ERR_PTR(-ENODEV);
+ return ERR_PTR(-EPROBE_DEFER);
}
rstc_id = rcdev->of_xlate(rcdev, &args);
return ERR_PTR(-ENOMEM);
}
- rstc->dev = dev;
rstc->rcdev = rcdev;
rstc->id = rstc_id;
return rstc;
}
+EXPORT_SYMBOL_GPL(of_reset_control_get);
+
+/**
+ * reset_control_get - Lookup and obtain a reference to a reset controller.
+ * @dev: device to be reset by the controller
+ * @id: reset line name
+ *
+ * Returns a struct reset_control or IS_ERR() condition containing errno.
+ *
+ * Use of id names is optional.
+ */
+struct reset_control *reset_control_get(struct device *dev, const char *id)
+{
+ struct reset_control *rstc;
+
+ if (!dev)
+ return ERR_PTR(-EINVAL);
+
+ rstc = of_reset_control_get(dev->of_node, id);
+ if (!IS_ERR(rstc))
+ rstc->dev = dev;
+
+ return rstc;
+}
EXPORT_SYMBOL_GPL(reset_control_get);
/**
}
EXPORT_SYMBOL_GPL(devm_reset_control_get);
-static int devm_reset_control_match(struct device *dev, void *res, void *data)
-{
- struct reset_control **rstc = res;
- if (WARN_ON(!rstc || !*rstc))
- return 0;
- return *rstc == data;
-}
-
-/**
- * devm_reset_control_put - resource managed reset_control_put()
- * @rstc: reset controller to free
- *
- * Deallocate a reset control allocated withd devm_reset_control_get().
- * This function will not need to be called normally, as devres will take
- * care of freeing the resource.
- */
-void devm_reset_control_put(struct reset_control *rstc)
-{
- int ret;
-
- ret = devres_release(rstc->dev, devm_reset_control_release,
- devm_reset_control_match, rstc);
- if (ret)
- WARN_ON(ret);
-}
-EXPORT_SYMBOL_GPL(devm_reset_control_put);
-
/**
* device_reset - find reset controller associated with the device
* and perform reset
--- /dev/null
+if ARCH_STI
+
+config STI_RESET_SYSCFG
+ bool
+ select RESET_CONTROLLER
+
+config STIH415_RESET
+ bool
+ select STI_RESET_SYSCFG
+
+config STIH416_RESET
+ bool
+ select STI_RESET_SYSCFG
+
+endif
--- /dev/null
+obj-$(CONFIG_STI_RESET_SYSCFG) += reset-syscfg.o
+
+obj-$(CONFIG_STIH415_RESET) += reset-stih415.o
+obj-$(CONFIG_STIH416_RESET) += reset-stih416.o
--- /dev/null
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited
+ * Author: Stephen Gallimore <stephen.gallimore@st.com>
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/reset-controller/stih415-resets.h>
+
+#include "reset-syscfg.h"
+
+/*
+ * STiH415 Peripheral powerdown definitions.
+ */
+static const char stih415_front[] = "st,stih415-front-syscfg";
+static const char stih415_rear[] = "st,stih415-rear-syscfg";
+static const char stih415_sbc[] = "st,stih415-sbc-syscfg";
+static const char stih415_lpm[] = "st,stih415-lpm-syscfg";
+
+#define STIH415_PDN_FRONT(_bit) \
+ _SYSCFG_RST_CH(stih415_front, SYSCFG_114, _bit, SYSSTAT_187, _bit)
+
+#define STIH415_PDN_REAR(_cntl, _stat) \
+ _SYSCFG_RST_CH(stih415_rear, SYSCFG_336, _cntl, SYSSTAT_384, _stat)
+
+#define STIH415_SRST_REAR(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih415_rear, _reg, _bit)
+
+#define STIH415_SRST_SBC(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih415_sbc, _reg, _bit)
+
+#define STIH415_SRST_FRONT(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih415_front, _reg, _bit)
+
+#define STIH415_SRST_LPM(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih415_lpm, _reg, _bit)
+
+#define SYSCFG_114 0x38 /* Powerdown request EMI/NAND/Keyscan */
+#define SYSSTAT_187 0x15c /* Powerdown status EMI/NAND/Keyscan */
+
+#define SYSCFG_336 0x90 /* Powerdown request USB/SATA/PCIe */
+#define SYSSTAT_384 0x150 /* Powerdown status USB/SATA/PCIe */
+
+#define SYSCFG_376 0x130 /* Reset generator 0 control 0 */
+#define SYSCFG_166 0x108 /* Softreset Ethernet 0 */
+#define SYSCFG_31 0x7c /* Softreset Ethernet 1 */
+#define LPM_SYSCFG_1 0x4 /* Softreset IRB */
+
+static const struct syscfg_reset_channel_data stih415_powerdowns[] = {
+ [STIH415_EMISS_POWERDOWN] = STIH415_PDN_FRONT(0),
+ [STIH415_NAND_POWERDOWN] = STIH415_PDN_FRONT(1),
+ [STIH415_KEYSCAN_POWERDOWN] = STIH415_PDN_FRONT(2),
+ [STIH415_USB0_POWERDOWN] = STIH415_PDN_REAR(0, 0),
+ [STIH415_USB1_POWERDOWN] = STIH415_PDN_REAR(1, 1),
+ [STIH415_USB2_POWERDOWN] = STIH415_PDN_REAR(2, 2),
+ [STIH415_SATA0_POWERDOWN] = STIH415_PDN_REAR(3, 3),
+ [STIH415_SATA1_POWERDOWN] = STIH415_PDN_REAR(4, 4),
+ [STIH415_PCIE_POWERDOWN] = STIH415_PDN_REAR(5, 8),
+};
+
+static const struct syscfg_reset_channel_data stih415_softresets[] = {
+ [STIH415_ETH0_SOFTRESET] = STIH415_SRST_FRONT(SYSCFG_166, 0),
+ [STIH415_ETH1_SOFTRESET] = STIH415_SRST_SBC(SYSCFG_31, 0),
+ [STIH415_IRB_SOFTRESET] = STIH415_SRST_LPM(LPM_SYSCFG_1, 6),
+ [STIH415_USB0_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 9),
+ [STIH415_USB1_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 10),
+ [STIH415_USB2_SOFTRESET] = STIH415_SRST_REAR(SYSCFG_376, 11),
+};
+
+static struct syscfg_reset_controller_data stih415_powerdown_controller = {
+ .wait_for_ack = true,
+ .nr_channels = ARRAY_SIZE(stih415_powerdowns),
+ .channels = stih415_powerdowns,
+};
+
+static struct syscfg_reset_controller_data stih415_softreset_controller = {
+ .wait_for_ack = false,
+ .active_low = true,
+ .nr_channels = ARRAY_SIZE(stih415_softresets),
+ .channels = stih415_softresets,
+};
+
+static struct of_device_id stih415_reset_match[] = {
+ { .compatible = "st,stih415-powerdown",
+ .data = &stih415_powerdown_controller, },
+ { .compatible = "st,stih415-softreset",
+ .data = &stih415_softreset_controller, },
+ {},
+};
+
+static struct platform_driver stih415_reset_driver = {
+ .probe = syscfg_reset_probe,
+ .driver = {
+ .name = "reset-stih415",
+ .owner = THIS_MODULE,
+ .of_match_table = stih415_reset_match,
+ },
+};
+
+static int __init stih415_reset_init(void)
+{
+ return platform_driver_register(&stih415_reset_driver);
+}
+arch_initcall(stih415_reset_init);
--- /dev/null
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited
+ * Author: Stephen Gallimore <stephen.gallimore@st.com>
+ * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#include <dt-bindings/reset-controller/stih416-resets.h>
+
+#include "reset-syscfg.h"
+
+/*
+ * STiH416 Peripheral powerdown definitions.
+ */
+static const char stih416_front[] = "st,stih416-front-syscfg";
+static const char stih416_rear[] = "st,stih416-rear-syscfg";
+static const char stih416_sbc[] = "st,stih416-sbc-syscfg";
+static const char stih416_lpm[] = "st,stih416-lpm-syscfg";
+static const char stih416_cpu[] = "st,stih416-cpu-syscfg";
+
+#define STIH416_PDN_FRONT(_bit) \
+ _SYSCFG_RST_CH(stih416_front, SYSCFG_1500, _bit, SYSSTAT_1578, _bit)
+
+#define STIH416_PDN_REAR(_cntl, _stat) \
+ _SYSCFG_RST_CH(stih416_rear, SYSCFG_2525, _cntl, SYSSTAT_2583, _stat)
+
+#define SYSCFG_1500 0x7d0 /* Powerdown request EMI/NAND/Keyscan */
+#define SYSSTAT_1578 0x908 /* Powerdown status EMI/NAND/Keyscan */
+
+#define SYSCFG_2525 0x834 /* Powerdown request USB/SATA/PCIe */
+#define SYSSTAT_2583 0x91c /* Powerdown status USB/SATA/PCIe */
+
+#define SYSCFG_2552 0x8A0 /* Reset Generator control 0 */
+#define SYSCFG_1539 0x86c /* Softreset Ethernet 0 */
+#define SYSCFG_510 0x7f8 /* Softreset Ethernet 1 */
+#define LPM_SYSCFG_1 0x4 /* Softreset IRB */
+#define SYSCFG_2553 0x8a4 /* Softreset SATA0/1, PCIE0/1 */
+#define SYSCFG_7563 0x8cc /* MPE softresets 0 */
+#define SYSCFG_7564 0x8d0 /* MPE softresets 1 */
+
+#define STIH416_SRST_CPU(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih416_cpu, _reg, _bit)
+
+#define STIH416_SRST_FRONT(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih416_front, _reg, _bit)
+
+#define STIH416_SRST_REAR(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih416_rear, _reg, _bit)
+
+#define STIH416_SRST_LPM(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih416_lpm, _reg, _bit)
+
+#define STIH416_SRST_SBC(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih416_sbc, _reg, _bit)
+
+static const struct syscfg_reset_channel_data stih416_powerdowns[] = {
+ [STIH416_EMISS_POWERDOWN] = STIH416_PDN_FRONT(0),
+ [STIH416_NAND_POWERDOWN] = STIH416_PDN_FRONT(1),
+ [STIH416_KEYSCAN_POWERDOWN] = STIH416_PDN_FRONT(2),
+ [STIH416_USB0_POWERDOWN] = STIH416_PDN_REAR(0, 0),
+ [STIH416_USB1_POWERDOWN] = STIH416_PDN_REAR(1, 1),
+ [STIH416_USB2_POWERDOWN] = STIH416_PDN_REAR(2, 2),
+ [STIH416_USB3_POWERDOWN] = STIH416_PDN_REAR(6, 5),
+ [STIH416_SATA0_POWERDOWN] = STIH416_PDN_REAR(3, 3),
+ [STIH416_SATA1_POWERDOWN] = STIH416_PDN_REAR(4, 4),
+ [STIH416_PCIE0_POWERDOWN] = STIH416_PDN_REAR(7, 9),
+ [STIH416_PCIE1_POWERDOWN] = STIH416_PDN_REAR(5, 8),
+};
+
+static const struct syscfg_reset_channel_data stih416_softresets[] = {
+ [STIH416_ETH0_SOFTRESET] = STIH416_SRST_FRONT(SYSCFG_1539, 0),
+ [STIH416_ETH1_SOFTRESET] = STIH416_SRST_SBC(SYSCFG_510, 0),
+ [STIH416_IRB_SOFTRESET] = STIH416_SRST_LPM(LPM_SYSCFG_1, 6),
+ [STIH416_USB0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 9),
+ [STIH416_USB1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 10),
+ [STIH416_USB2_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 11),
+ [STIH416_USB3_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 28),
+ [STIH416_SATA0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 7),
+ [STIH416_SATA1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 3),
+ [STIH416_PCIE0_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 15),
+ [STIH416_PCIE1_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 2),
+ [STIH416_AUD_DAC_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 14),
+ [STIH416_HDTVOUT_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 5),
+ [STIH416_VTAC_M_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 25),
+ [STIH416_VTAC_A_RX_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2552, 26),
+ [STIH416_SYNC_HD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 5),
+ [STIH416_SYNC_SD_SOFTRESET] = STIH416_SRST_REAR(SYSCFG_2553, 6),
+ [STIH416_BLITTER_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 10),
+ [STIH416_GPU_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 11),
+ [STIH416_VTAC_M_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 18),
+ [STIH416_VTAC_A_TX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 19),
+ [STIH416_VTG_AUX_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 21),
+ [STIH416_JPEG_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7563, 23),
+ [STIH416_HVA_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 2),
+ [STIH416_COMPO_M_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 3),
+ [STIH416_COMPO_A_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 4),
+ [STIH416_VP8_DEC_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 10),
+ [STIH416_VTG_MAIN_SOFTRESET] = STIH416_SRST_CPU(SYSCFG_7564, 16),
+};
+
+static struct syscfg_reset_controller_data stih416_powerdown_controller = {
+ .wait_for_ack = true,
+ .nr_channels = ARRAY_SIZE(stih416_powerdowns),
+ .channels = stih416_powerdowns,
+};
+
+static struct syscfg_reset_controller_data stih416_softreset_controller = {
+ .wait_for_ack = false,
+ .active_low = true,
+ .nr_channels = ARRAY_SIZE(stih416_softresets),
+ .channels = stih416_softresets,
+};
+
+static struct of_device_id stih416_reset_match[] = {
+ { .compatible = "st,stih416-powerdown",
+ .data = &stih416_powerdown_controller, },
+ { .compatible = "st,stih416-softreset",
+ .data = &stih416_softreset_controller, },
+ {},
+};
+
+static struct platform_driver stih416_reset_driver = {
+ .probe = syscfg_reset_probe,
+ .driver = {
+ .name = "reset-stih416",
+ .owner = THIS_MODULE,
+ .of_match_table = stih416_reset_match,
+ },
+};
+
+static int __init stih416_reset_init(void)
+{
+ return platform_driver_register(&stih416_reset_driver);
+}
+arch_initcall(stih416_reset_init);
--- /dev/null
+/*
+ * Copyright (C) 2013 STMicroelectronics Limited
+ * Author: Stephen Gallimore <stephen.gallimore@st.com>
+ *
+ * Inspired by mach-imx/src.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#include "reset-syscfg.h"
+
+/**
+ * Reset channel regmap configuration
+ *
+ * @reset: regmap field for the channel's reset bit.
+ * @ack: regmap field for the channel's ack bit (optional).
+ */
+struct syscfg_reset_channel {
+ struct regmap_field *reset;
+ struct regmap_field *ack;
+};
+
+/**
+ * A reset controller which groups together a set of related reset bits, which
+ * may be located in different system configuration registers.
+ *
+ * @rst: base reset controller structure.
+ * @active_low: are the resets in this controller active low, i.e. clearing
+ * the reset bit puts the hardware into reset.
+ * @channels: An array of reset channels for this controller.
+ */
+struct syscfg_reset_controller {
+ struct reset_controller_dev rst;
+ bool active_low;
+ struct syscfg_reset_channel *channels;
+};
+
+#define to_syscfg_reset_controller(_rst) \
+ container_of(_rst, struct syscfg_reset_controller, rst)
+
+static int syscfg_reset_program_hw(struct reset_controller_dev *rcdev,
+ unsigned long idx, int assert)
+{
+ struct syscfg_reset_controller *rst = to_syscfg_reset_controller(rcdev);
+ const struct syscfg_reset_channel *ch;
+ u32 ctrl_val = rst->active_low ? !assert : !!assert;
+ int err;
+
+ if (idx >= rcdev->nr_resets)
+ return -EINVAL;
+
+ ch = &rst->channels[idx];
+
+ err = regmap_field_write(ch->reset, ctrl_val);
+ if (err)
+ return err;
+
+ if (ch->ack) {
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+ u32 ack_val;
+
+ while (true) {
+ err = regmap_field_read(ch->ack, &ack_val);
+ if (err)
+ return err;
+
+ if (ack_val == ctrl_val)
+ break;
+
+ if (time_after(jiffies, timeout))
+ return -ETIME;
+
+ cpu_relax();
+ }
+ }
+
+ return 0;
+}
+
+static int syscfg_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ return syscfg_reset_program_hw(rcdev, idx, true);
+}
+
+static int syscfg_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ return syscfg_reset_program_hw(rcdev, idx, false);
+}
+
+static int syscfg_reset_dev(struct reset_controller_dev *rcdev,
+ unsigned long idx)
+{
+ int err = syscfg_reset_assert(rcdev, idx);
+ if (err)
+ return err;
+
+ return syscfg_reset_deassert(rcdev, idx);
+}
+
+static struct reset_control_ops syscfg_reset_ops = {
+ .reset = syscfg_reset_dev,
+ .assert = syscfg_reset_assert,
+ .deassert = syscfg_reset_deassert,
+};
+
+static int syscfg_reset_controller_register(struct device *dev,
+ const struct syscfg_reset_controller_data *data)
+{
+ struct syscfg_reset_controller *rc;
+ size_t size;
+ int i, err;
+
+ rc = devm_kzalloc(dev, sizeof(*rc), GFP_KERNEL);
+ if (!rc)
+ return -ENOMEM;
+
+ size = sizeof(struct syscfg_reset_channel) * data->nr_channels;
+
+ rc->channels = devm_kzalloc(dev, size, GFP_KERNEL);
+ if (!rc->channels)
+ return -ENOMEM;
+
+ rc->rst.ops = &syscfg_reset_ops,
+ rc->rst.of_node = dev->of_node;
+ rc->rst.nr_resets = data->nr_channels;
+ rc->active_low = data->active_low;
+
+ for (i = 0; i < data->nr_channels; i++) {
+ struct regmap *map;
+ struct regmap_field *f;
+ const char *compatible = data->channels[i].compatible;
+
+ map = syscon_regmap_lookup_by_compatible(compatible);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+
+ f = devm_regmap_field_alloc(dev, map, data->channels[i].reset);
+ if (IS_ERR(f))
+ return PTR_ERR(f);
+
+ rc->channels[i].reset = f;
+
+ if (!data->wait_for_ack)
+ continue;
+
+ f = devm_regmap_field_alloc(dev, map, data->channels[i].ack);
+ if (IS_ERR(f))
+ return PTR_ERR(f);
+
+ rc->channels[i].ack = f;
+ }
+
+ err = reset_controller_register(&rc->rst);
+ if (!err)
+ dev_info(dev, "registered\n");
+
+ return err;
+}
+
+int syscfg_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = pdev ? &pdev->dev : NULL;
+ const struct of_device_id *match;
+
+ if (!dev || !dev->driver)
+ return -ENODEV;
+
+ match = of_match_device(dev->driver->of_match_table, dev);
+ if (!match || !match->data)
+ return -EINVAL;
+
+ return syscfg_reset_controller_register(dev, match->data);
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited
+ * Author: Stephen Gallimore <stephen.gallimore@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __STI_RESET_SYSCFG_H
+#define __STI_RESET_SYSCFG_H
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+/**
+ * Reset channel description for a system configuration register based
+ * reset controller.
+ *
+ * @compatible: Compatible string of the syscon regmap containing this
+ * channel's control and ack (status) bits.
+ * @reset: Regmap field description of the channel's reset bit.
+ * @ack: Regmap field description of the channel's acknowledge bit.
+ */
+struct syscfg_reset_channel_data {
+ const char *compatible;
+ struct reg_field reset;
+ struct reg_field ack;
+};
+
+#define _SYSCFG_RST_CH(_c, _rr, _rb, _ar, _ab) \
+ { .compatible = _c, \
+ .reset = REG_FIELD(_rr, _rb, _rb), \
+ .ack = REG_FIELD(_ar, _ab, _ab), }
+
+#define _SYSCFG_RST_CH_NO_ACK(_c, _rr, _rb) \
+ { .compatible = _c, \
+ .reset = REG_FIELD(_rr, _rb, _rb), }
+
+/**
+ * Description of a system configuration register based reset controller.
+ *
+ * @wait_for_ack: The controller will wait for reset assert and de-assert to
+ * be "ack'd" in a channel's ack field.
+ * @active_low: Are the resets in this controller active low, i.e. clearing
+ * the reset bit puts the hardware into reset.
+ * @nr_channels: The number of reset channels in this controller.
+ * @channels: An array of reset channel descriptions.
+ */
+struct syscfg_reset_controller_data {
+ bool wait_for_ack;
+ bool active_low;
+ int nr_channels;
+ const struct syscfg_reset_channel_data *channels;
+};
+
+/**
+ * syscfg_reset_probe(): platform device probe function used by syscfg
+ * reset controller drivers. This registers a reset
+ * controller configured by the OF match data for
+ * the compatible device which should be of type
+ * "struct syscfg_reset_controller_data".
+ *
+ * @pdev: platform device
+ */
+int syscfg_reset_probe(struct platform_device *pdev);
+
+#endif /* __STI_RESET_SYSCFG_H */
dev_set_drvdata(dev, data);
rtc = devm_rtc_device_register(dev, DRV_NAME, &rtc_ops, THIS_MODULE);
- if (IS_ERR(rtc))
- return PTR_ERR(rtc);
-
- return 0;
+ return PTR_ERR_OR_ZERO(rtc);
}
#ifdef CONFIG_OF
struct resource *res;
struct rtc_plat_data *pdata;
u32 rtc_time;
+ u32 rtc_date;
int ret = 0;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
}
}
+ /*
+ * A date after January 19th, 2038 does not fit on 32 bits and
+ * will confuse the kernel and userspace. Reset to a sane date
+ * (January 1st, 2013) if we're after 2038.
+ */
+ rtc_date = readl(pdata->ioaddr + RTC_DATE_REG_OFFS);
+ if (bcd2bin((rtc_date >> RTC_YEAR_OFFS) & 0xff) >= 38) {
+ dev_info(&pdev->dev, "invalid RTC date, resetting to January 1st, 2013\n");
+ writel(0x130101, pdata->ioaddr + RTC_DATE_REG_OFFS);
+ }
+
pdata->irq = platform_get_irq(pdev, 0);
platform_set_drvdata(pdev, pdata);
*/
int cio_commit_config(struct subchannel *sch)
{
- struct schib schib;
int ccode, retry, ret = 0;
+ struct schib schib;
+ struct irb irb;
if (stsch_err(sch->schid, &schib) || !css_sch_is_valid(&schib))
return -ENODEV;
ret = -EAGAIN;
break;
case 1: /* status pending */
- return -EBUSY;
+ ret = -EBUSY;
+ if (tsch(sch->schid, &irb))
+ return ret;
+ break;
case 2: /* busy */
udelay(100); /* allow for recovery */
ret = -EBUSY;
*/
int cio_enable_subchannel(struct subchannel *sch, u32 intparm)
{
- int retry;
int ret;
CIO_TRACE_EVENT(2, "ensch");
sch->config.isc = sch->isc;
sch->config.intparm = intparm;
- for (retry = 0; retry < 3; retry++) {
+ ret = cio_commit_config(sch);
+ if (ret == -EIO) {
+ /*
+ * Got a program check in msch. Try without
+ * the concurrent sense bit the next time.
+ */
+ sch->config.csense = 0;
ret = cio_commit_config(sch);
- if (ret == -EIO) {
- /*
- * Got a program check in msch. Try without
- * the concurrent sense bit the next time.
- */
- sch->config.csense = 0;
- } else if (ret == -EBUSY) {
- struct irb irb;
- if (tsch(sch->schid, &irb) != 0)
- break;
- } else
- break;
}
CIO_HEX_EVENT(2, &ret, sizeof(ret));
return ret;
*/
int cio_disable_subchannel(struct subchannel *sch)
{
- int retry;
int ret;
CIO_TRACE_EVENT(2, "dissch");
return -ENODEV;
sch->config.ena = 0;
+ ret = cio_commit_config(sch);
- for (retry = 0; retry < 3; retry++) {
- ret = cio_commit_config(sch);
- if (ret == -EBUSY) {
- struct irb irb;
- if (tsch(sch->schid, &irb) != 0)
- break;
- } else
- break;
- }
CIO_HEX_EVENT(2, &ret, sizeof(ret));
return ret;
}
#define need_siga_sync_out_after_pci(q) \
(unlikely(q->irq_ptr->siga_flag.sync_out_after_pci))
-#define for_each_input_queue(irq_ptr, q, i) \
- for (i = 0, q = irq_ptr->input_qs[0]; \
- i < irq_ptr->nr_input_qs; \
- q = irq_ptr->input_qs[++i])
-#define for_each_output_queue(irq_ptr, q, i) \
- for (i = 0, q = irq_ptr->output_qs[0]; \
- i < irq_ptr->nr_output_qs; \
- q = irq_ptr->output_qs[++i])
+#define for_each_input_queue(irq_ptr, q, i) \
+ for (i = 0; i < irq_ptr->nr_input_qs && \
+ ({ q = irq_ptr->input_qs[i]; 1; }); i++)
+#define for_each_output_queue(irq_ptr, q, i) \
+ for (i = 0; i < irq_ptr->nr_output_qs && \
+ ({ q = irq_ptr->output_qs[i]; 1; }); i++)
#define prev_buf(bufnr) \
((bufnr + QDIO_MAX_BUFFERS_MASK) & QDIO_MAX_BUFFERS_MASK)
}
}
- if (!pci_out_supported(q))
+ if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED))
return;
for_each_output_queue(irq_ptr, q, i) {
return -ENOMEM;
}
- INIT_LIST_HEAD(&cmd->cmd_list);
-
memcpy(&cmd->atio, atio, sizeof(*atio));
cmd->state = QLA_TGT_STATE_NEW;
cmd->tgt = vha->vha_tgt.qla_tgt;
uint16_t loop_id; /* to save extra sess dereferences */
struct qla_tgt *tgt; /* to save extra sess dereferences */
struct scsi_qla_host *vha;
- struct list_head cmd_list;
struct atio_from_isp atio;
};
iowrite32(value, clk->mapped_reg);
}
+static unsigned int r8(const void __iomem *addr)
+{
+ return ioread8(addr);
+}
+
+static unsigned int r16(const void __iomem *addr)
+{
+ return ioread16(addr);
+}
+
+static unsigned int r32(const void __iomem *addr)
+{
+ return ioread32(addr);
+}
+
static int sh_clk_mstp_enable(struct clk *clk)
{
sh_clk_write(sh_clk_read(clk) & ~(1 << clk->enable_bit), clk);
+ if (clk->status_reg) {
+ unsigned int (*read)(const void __iomem *addr);
+ int i;
+ void __iomem *mapped_status = (phys_addr_t)clk->status_reg -
+ (phys_addr_t)clk->enable_reg + clk->mapped_reg;
+
+ if (clk->flags & CLK_ENABLE_REG_8BIT)
+ read = r8;
+ else if (clk->flags & CLK_ENABLE_REG_16BIT)
+ read = r16;
+ else
+ read = r32;
+
+ for (i = 1000;
+ (read(mapped_status) & (1 << clk->enable_bit)) && i;
+ i--)
+ cpu_relax();
+ if (!i) {
+ pr_err("cpg: failed to enable %p[%d]\n",
+ clk->enable_reg, clk->enable_bit);
+ return -ETIMEDOUT;
+ }
+ }
return 0;
}
def_tristate SPI_PXA2XX && PCI
config SPI_RSPI
- tristate "Renesas RSPI controller"
+ tristate "Renesas RSPI/QSPI controller"
depends on (SUPERH && SH_DMAE_BASE) || ARCH_SHMOBILE
help
- SPI driver for Renesas RSPI blocks.
+ SPI driver for Renesas RSPI and QSPI blocks.
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
init_completion(&hw->done);
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+ if (hw->pdata->lsb)
+ master->mode_bits |= SPI_LSB_FIRST;
master->num_chipselect = hw->pdata->num_cs;
master->bus_num = hw->pdata->bus_num;
hw->bitbang.master = hw->master;
ret = master->transfer_one_message(master, master->cur_msg);
if (ret) {
dev_err(&master->dev,
- "failed to transfer one message from queue: %d\n", ret);
- master->cur_msg->status = ret;
- spi_finalize_current_message(master);
+ "failed to transfer one message from queue\n");
return;
}
}
/* If size is not set, or set to 0, always return EOF. */
if (asma->size == 0)
- goto out;
+ goto out_unlock;
if (!asma->file) {
ret = -EBADF;
- goto out;
+ goto out_unlock;
}
- ret = asma->file->f_op->read(asma->file, buf, len, pos);
- if (ret < 0)
- goto out;
+ mutex_unlock(&ashmem_mutex);
- /** Update backing file pos, since f_ops->read() doesn't */
- asma->file->f_pos = *pos;
+ /*
+ * asma and asma->file are used outside the lock here. We assume
+ * once asma->file is set it will never be changed, and will not
+ * be destroyed until all references to the file are dropped and
+ * ashmem_release is called.
+ */
+ ret = asma->file->f_op->read(asma->file, buf, len, pos);
+ if (ret >= 0) {
+ /** Update backing file pos, since f_ops->read() doesn't */
+ asma->file->f_pos = *pos;
+ }
+ return ret;
-out:
+out_unlock:
mutex_unlock(&ashmem_mutex);
return ret;
}
static int set_name(struct ashmem_area *asma, void __user *name)
{
+ int len;
int ret = 0;
char local_name[ASHMEM_NAME_LEN];
* variable that does not need protection and later copy the local
* variable to the structure member with lock held.
*/
- if (copy_from_user(local_name, name, ASHMEM_NAME_LEN))
- return -EFAULT;
-
+ len = strncpy_from_user(local_name, name, ASHMEM_NAME_LEN);
+ if (len < 0)
+ return len;
+ if (len == ASHMEM_NAME_LEN)
+ local_name[ASHMEM_NAME_LEN - 1] = '\0';
mutex_lock(&ashmem_mutex);
/* cannot change an existing mapping's name */
- if (unlikely(asma->file)) {
+ if (unlikely(asma->file))
ret = -EINVAL;
- goto out;
- }
- memcpy(asma->name + ASHMEM_NAME_PREFIX_LEN,
- local_name, ASHMEM_NAME_LEN);
- asma->name[ASHMEM_FULL_NAME_LEN-1] = '\0';
-out:
- mutex_unlock(&ashmem_mutex);
+ else
+ strcpy(asma->name + ASHMEM_NAME_PREFIX_LEN, local_name);
+ mutex_unlock(&ashmem_mutex);
return ret;
}
compat_ulong_t arg;
};
+struct compat_ion_handle_data {
+ compat_int_t handle;
+};
+
#define COMPAT_ION_IOC_ALLOC _IOWR(ION_IOC_MAGIC, 0, \
struct compat_ion_allocation_data)
-#define COMPAT_ION_IOC_FREE _IOWR(ION_IOC_MAGIC, 1, struct ion_handle_data)
+#define COMPAT_ION_IOC_FREE _IOWR(ION_IOC_MAGIC, 1, \
+ struct compat_ion_handle_data)
#define COMPAT_ION_IOC_CUSTOM _IOWR(ION_IOC_MAGIC, 6, \
struct compat_ion_custom_data)
return err;
}
+static int compat_get_ion_handle_data(
+ struct compat_ion_handle_data __user *data32,
+ struct ion_handle_data __user *data)
+{
+ compat_int_t i;
+ int err;
+
+ err = get_user(i, &data32->handle);
+ err |= put_user(i, &data->handle);
+
+ return err;
+}
+
static int compat_put_ion_allocation_data(
struct compat_ion_allocation_data __user *data32,
struct ion_allocation_data __user *data)
}
case COMPAT_ION_IOC_FREE:
{
- struct compat_ion_allocation_data __user *data32;
- struct ion_allocation_data __user *data;
+ struct compat_ion_handle_data __user *data32;
+ struct ion_handle_data __user *data;
int err;
data32 = compat_ptr(arg);
if (data == NULL)
return -EFAULT;
- err = compat_get_ion_allocation_data(data32, data);
+ err = compat_get_ion_handle_data(data32, data);
if (err)
return err;
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/sizes.h>
+#include <linux/io.h>
#include "ion.h"
#include "ion_priv.h"
};
struct ion_platform_data dummy_ion_pdata = {
- .nr = 4,
+ .nr = ARRAY_SIZE(dummy_heaps),
.heaps = dummy_heaps,
};
heaps = kzalloc(sizeof(struct ion_heap *) * dummy_ion_pdata.nr,
GFP_KERNEL);
if (!heaps)
- return PTR_ERR(heaps);
+ return -ENOMEM;
/* Allocate a dummy carveout heap */
}
return err;
}
+device_initcall(ion_dummy_init);
static void __exit ion_dummy_exit(void)
{
return;
}
-
-module_init(ion_dummy_init);
-module_exit(ion_dummy_exit);
-
+__exitcall(ion_dummy_exit);
init_waitqueue_head(&heap->waitqueue);
heap->task = kthread_run(ion_heap_deferred_free, heap,
"%s", heap->name);
- sched_setscheduler(heap->task, SCHED_IDLE, ¶m);
if (IS_ERR(heap->task)) {
pr_err("%s: creating thread for deferred free failed\n",
__func__);
return PTR_RET(heap->task);
}
+ sched_setscheduler(heap->task, SCHED_IDLE, ¶m);
return 0;
}
#ifndef _ION_PRIV_H
#define _ION_PRIV_H
+#include <linux/device.h>
#include <linux/dma-direction.h>
#include <linux/kref.h>
#include <linux/mm_types.h>
info->page = page;
info->order = orders[i];
+ INIT_LIST_HEAD(&info->list);
return info;
}
kfree(info);
struct list_head pages;
struct page_info *info, *tmp_info;
int i = 0;
- long size_remaining = PAGE_ALIGN(size);
+ unsigned long size_remaining = PAGE_ALIGN(size);
unsigned int max_order = orders[0];
if (align > PAGE_SIZE)
return -EINVAL;
+ if (size / PAGE_SIZE > totalram_pages / 2)
+ return -ENOMEM;
+
INIT_LIST_HEAD(&pages);
while (size_remaining > 0) {
info = alloc_largest_available(sys_heap, buffer, size_remaining,
u32 value;
};
+#if IS_ENABLED(CONFIG_SW_SYNC)
struct sw_sync_timeline *sw_sync_timeline_create(const char *name);
void sw_sync_timeline_inc(struct sw_sync_timeline *obj, u32 inc);
struct sync_pt *sw_sync_pt_create(struct sw_sync_timeline *obj, u32 value);
+#else
+static inline struct sw_sync_timeline *sw_sync_timeline_create(const char *name)
+{
+ return NULL;
+}
+
+static inline void sw_sync_timeline_inc(struct sw_sync_timeline *obj, u32 inc)
+{
+}
+
+static inline struct sync_pt *sw_sync_pt_create(struct sw_sync_timeline *obj,
+ u32 value)
+{
+ return NULL;
+}
+#endif /* IS_ENABLED(CONFIG_SW_SYNC) */
#endif /* __KERNEL __ */
container_of(kref, struct sync_timeline, kref);
unsigned long flags;
- if (obj->ops->release_obj)
- obj->ops->release_obj(obj);
-
spin_lock_irqsave(&sync_timeline_list_lock, flags);
list_del(&obj->sync_timeline_list);
spin_unlock_irqrestore(&sync_timeline_list_lock, flags);
+ if (obj->ops->release_obj)
+ obj->ops->release_obj(obj);
+
kfree(obj);
}
void sync_timeline_destroy(struct sync_timeline *obj)
{
obj->destroyed = true;
+ smp_wmb();
/*
- * If this is not the last reference, signal any children
- * that their parent is going away.
+ * signal any children that their parent is going away.
*/
+ sync_timeline_signal(obj);
- if (!kref_put(&obj->kref, sync_timeline_free))
- sync_timeline_signal(obj);
+ kref_put(&obj->kref, sync_timeline_free);
}
EXPORT_SYMBOL(sync_timeline_destroy);
ret = driver->auto_attach(dev, context);
if (ret >= 0)
ret = comedi_device_postconfig(dev);
- if (ret < 0)
- comedi_device_detach(dev);
mutex_unlock(&dev->mutex);
if (ret < 0) {
struct comedi_insn *insn, unsigned int *data)
{
struct pci1710_private *devpriv = dev->private;
+ unsigned int val;
int n, chan, range, ofs;
chan = CR_CHAN(insn->chanspec);
outw(devpriv->da_ranges, dev->iobase + PCI171x_DAREF);
ofs = PCI171x_DA1;
}
+ val = devpriv->ao_data[chan];
- for (n = 0; n < insn->n; n++)
- outw(data[n], dev->iobase + ofs);
+ for (n = 0; n < insn->n; n++) {
+ val = data[n];
+ outw(val, dev->iobase + ofs);
+ }
- devpriv->ao_data[chan] = data[n];
+ devpriv->ao_data[chan] = val;
return n;
struct comedi_insn *insn, unsigned int *data)
{
struct pci1710_private *devpriv = dev->private;
+ unsigned int val;
int n, rangereg, chan;
chan = CR_CHAN(insn->chanspec);
outb(rangereg, dev->iobase + PCI1720_RANGE);
devpriv->da_ranges = rangereg;
}
+ val = devpriv->ao_data[chan];
for (n = 0; n < insn->n; n++) {
- outw(data[n], dev->iobase + PCI1720_DA0 + (chan << 1));
+ val = data[n];
+ outw(val, dev->iobase + PCI1720_DA0 + (chan << 1));
outb(0, dev->iobase + PCI1720_SYNCOUT); /* update outputs */
}
- devpriv->ao_data[chan] = data[n];
+ devpriv->ao_data[chan] = val;
return n;
}
#include <linux/usb.h>
#include <linux/fcntl.h>
#include <linux/compiler.h>
+#include <asm/unaligned.h>
#include "comedi_fc.h"
#include "../comedidev.h"
}
/* 32 bits big endian from the A/D converter */
- val = be32_to_cpu(*((uint32_t *)((devpriv->insn_buf) + 1)));
+ val = be32_to_cpu(get_unaligned((uint32_t
+ *)(devpriv->insn_buf + 1)));
val &= 0x00ffffff; /* strip status byte */
val ^= 0x00800000; /* convert to unsigned */
return ret;
/* 32 bits big endian from the A/D converter */
- val = be32_to_cpu(*((uint32_t *)((devpriv->insn_buf)+1)));
+ val = be32_to_cpu(get_unaligned((uint32_t *)(devpriv->insn_buf + 1)));
val &= 0x00ffffff; /* strip status byte */
val ^= 0x00800000; /* convert to unsigned */
return rtn;
}
-/*
- * Common Packet Handling code
- */
-
-static void handle_data_in_packet(struct nd_struct *nd, struct ch_struct *ch,
- long dlen, long plen, int n1, u8 *dbuf)
-{
- char *error;
- long n;
- long remain;
- u8 *buf;
- u8 *b;
-
- remain = nd->nd_remain;
- nd->nd_tx_work = 1;
-
- /*
- * Otherwise data should appear only when we are
- * in the CS_READY state.
- */
-
- if (ch->ch_state < CS_READY) {
- error = "Data received before RWIN established";
- nd->nd_remain = 0;
- nd->nd_state = NS_SEND_ERROR;
- nd->nd_error = error;
- }
-
- /*
- * Assure that the data received is within the
- * allowable window.
- */
-
- n = (ch->ch_s_rwin - ch->ch_s_rin) & 0xffff;
-
- if (dlen > n) {
- error = "Receive data overrun";
- nd->nd_remain = 0;
- nd->nd_state = NS_SEND_ERROR;
- nd->nd_error = error;
- }
-
- /*
- * If we received 3 or less characters,
- * assume it is a human typing, and set RTIME
- * to 10 milliseconds.
- *
- * If we receive 10 or more characters,
- * assume its not a human typing, and set RTIME
- * to 100 milliseconds.
- */
-
- if (ch->ch_edelay != DGRP_RTIME) {
- if (ch->ch_rtime != ch->ch_edelay) {
- ch->ch_rtime = ch->ch_edelay;
- ch->ch_flag |= CH_PARAM;
- }
- } else if (dlen <= 3) {
- if (ch->ch_rtime != 10) {
- ch->ch_rtime = 10;
- ch->ch_flag |= CH_PARAM;
- }
- } else {
- if (ch->ch_rtime != DGRP_RTIME) {
- ch->ch_rtime = DGRP_RTIME;
- ch->ch_flag |= CH_PARAM;
- }
- }
-
- /*
- * If a portion of the packet is outside the
- * buffer, shorten the effective length of the
- * data packet to be the amount of data received.
- */
-
- if (remain < plen)
- dlen -= plen - remain;
-
- /*
- * Detect if receive flush is now complete.
- */
-
- if ((ch->ch_flag & CH_RX_FLUSH) != 0 &&
- ((ch->ch_flush_seq - nd->nd_seq_out) & SEQ_MASK) >=
- ((nd->nd_seq_in - nd->nd_seq_out) & SEQ_MASK)) {
- ch->ch_flag &= ~CH_RX_FLUSH;
- }
-
- /*
- * If we are ready to receive, move the data into
- * the receive buffer.
- */
-
- ch->ch_s_rin = (ch->ch_s_rin + dlen) & 0xffff;
-
- if (ch->ch_state == CS_READY &&
- (ch->ch_tun.un_open_count != 0) &&
- (ch->ch_tun.un_flag & UN_CLOSING) == 0 &&
- (ch->ch_cflag & CF_CREAD) != 0 &&
- (ch->ch_flag & (CH_BAUD0 | CH_RX_FLUSH)) == 0 &&
- (ch->ch_send & RR_RX_FLUSH) == 0) {
-
- if (ch->ch_rin + dlen >= RBUF_MAX) {
- n = RBUF_MAX - ch->ch_rin;
-
- memcpy(ch->ch_rbuf + ch->ch_rin, dbuf, n);
-
- ch->ch_rin = 0;
- dbuf += n;
- dlen -= n;
- }
-
- memcpy(ch->ch_rbuf + ch->ch_rin, dbuf, dlen);
-
- ch->ch_rin += dlen;
-
-
- /*
- * If we are not in fastcook mode, or
- * if there is a fastcook thread
- * waiting for data, send the data to
- * the line discipline.
- */
-
- if ((ch->ch_flag & CH_FAST_READ) == 0 ||
- ch->ch_inwait != 0) {
- dgrp_input(ch);
- }
-
- /*
- * If there is a read thread waiting
- * in select, and we are in fastcook
- * mode, wake him up.
- */
-
- if (waitqueue_active(&ch->ch_tun.un_tty->read_wait) &&
- (ch->ch_flag & CH_FAST_READ) != 0)
- wake_up_interruptible(&ch->ch_tun.un_tty->read_wait);
-
- /*
- * Wake any thread waiting in the
- * fastcook loop.
- */
-
- if ((ch->ch_flag & CH_INPUT) != 0) {
- ch->ch_flag &= ~CH_INPUT;
- wake_up_interruptible(&ch->ch_flag_wait);
- }
- }
-
- /*
- * Fabricate and insert a data packet header to
- * preced the remaining data when it comes in.
- */
-
- if (remain < plen) {
- dlen = plen - remain;
- b = buf;
-
- b[0] = 0x90 + n1;
- put_unaligned_be16(dlen, b + 1);
-
- remain = 3;
- if (remain > 0 && b != buf)
- memcpy(buf, b, remain);
-
- nd->nd_remain = remain;
- return;
- }
-}
-
/**
* dgrp_receive() -- decode data packets received from the remote PortServer.
* @nd: pointer to a node structure
plen = dlen + 1;
dbuf = b + 1;
- handle_data_in_packet(nd, ch, dlen, plen, n1, dbuf);
- break;
+ goto data;
/*
* Process 2-byte header data packet.
plen = dlen + 2;
dbuf = b + 2;
- handle_data_in_packet(nd, ch, dlen, plen, n1, dbuf);
- break;
+ goto data;
/*
* Process 3-byte header data packet.
dbuf = b + 3;
+ /*
+ * Common packet handling code.
+ */
+
+data:
+ nd->nd_tx_work = 1;
+
+ /*
+ * Otherwise data should appear only when we are
+ * in the CS_READY state.
+ */
+
+ if (ch->ch_state < CS_READY) {
+ error = "Data received before RWIN established";
+ goto prot_error;
+ }
+
+ /*
+ * Assure that the data received is within the
+ * allowable window.
+ */
+
+ n = (ch->ch_s_rwin - ch->ch_s_rin) & 0xffff;
+
+ if (dlen > n) {
+ error = "Receive data overrun";
+ goto prot_error;
+ }
+
+ /*
+ * If we received 3 or less characters,
+ * assume it is a human typing, and set RTIME
+ * to 10 milliseconds.
+ *
+ * If we receive 10 or more characters,
+ * assume its not a human typing, and set RTIME
+ * to 100 milliseconds.
+ */
+
+ if (ch->ch_edelay != DGRP_RTIME) {
+ if (ch->ch_rtime != ch->ch_edelay) {
+ ch->ch_rtime = ch->ch_edelay;
+ ch->ch_flag |= CH_PARAM;
+ }
+ } else if (dlen <= 3) {
+ if (ch->ch_rtime != 10) {
+ ch->ch_rtime = 10;
+ ch->ch_flag |= CH_PARAM;
+ }
+ } else {
+ if (ch->ch_rtime != DGRP_RTIME) {
+ ch->ch_rtime = DGRP_RTIME;
+ ch->ch_flag |= CH_PARAM;
+ }
+ }
+
+ /*
+ * If a portion of the packet is outside the
+ * buffer, shorten the effective length of the
+ * data packet to be the amount of data received.
+ */
+
+ if (remain < plen)
+ dlen -= plen - remain;
+
+ /*
+ * Detect if receive flush is now complete.
+ */
+
+ if ((ch->ch_flag & CH_RX_FLUSH) != 0 &&
+ ((ch->ch_flush_seq - nd->nd_seq_out) & SEQ_MASK) >=
+ ((nd->nd_seq_in - nd->nd_seq_out) & SEQ_MASK)) {
+ ch->ch_flag &= ~CH_RX_FLUSH;
+ }
+
+ /*
+ * If we are ready to receive, move the data into
+ * the receive buffer.
+ */
+
+ ch->ch_s_rin = (ch->ch_s_rin + dlen) & 0xffff;
+
+ if (ch->ch_state == CS_READY &&
+ (ch->ch_tun.un_open_count != 0) &&
+ (ch->ch_tun.un_flag & UN_CLOSING) == 0 &&
+ (ch->ch_cflag & CF_CREAD) != 0 &&
+ (ch->ch_flag & (CH_BAUD0 | CH_RX_FLUSH)) == 0 &&
+ (ch->ch_send & RR_RX_FLUSH) == 0) {
+
+ if (ch->ch_rin + dlen >= RBUF_MAX) {
+ n = RBUF_MAX - ch->ch_rin;
+
+ memcpy(ch->ch_rbuf + ch->ch_rin, dbuf, n);
+
+ ch->ch_rin = 0;
+ dbuf += n;
+ dlen -= n;
+ }
+
+ memcpy(ch->ch_rbuf + ch->ch_rin, dbuf, dlen);
+
+ ch->ch_rin += dlen;
+
+
+ /*
+ * If we are not in fastcook mode, or
+ * if there is a fastcook thread
+ * waiting for data, send the data to
+ * the line discipline.
+ */
+
+ if ((ch->ch_flag & CH_FAST_READ) == 0 ||
+ ch->ch_inwait != 0) {
+ dgrp_input(ch);
+ }
+
+ /*
+ * If there is a read thread waiting
+ * in select, and we are in fastcook
+ * mode, wake him up.
+ */
+
+ if (waitqueue_active(&ch->ch_tun.un_tty->read_wait) &&
+ (ch->ch_flag & CH_FAST_READ) != 0)
+ wake_up_interruptible(&ch->ch_tun.un_tty->read_wait);
+
+ /*
+ * Wake any thread waiting in the
+ * fastcook loop.
+ */
+
+ if ((ch->ch_flag & CH_INPUT) != 0) {
+ ch->ch_flag &= ~CH_INPUT;
+
+ wake_up_interruptible(&ch->ch_flag_wait);
+ }
+ }
+
+ /*
+ * Fabricate and insert a data packet header to
+ * preced the remaining data when it comes in.
+ */
+
+ if (remain < plen) {
+ dlen = plen - remain;
+ b = buf;
+
+ b[0] = 0x90 + n1;
+ put_unaligned_be16(dlen, b + 1);
+
+ remain = 3;
+ goto done;
+ }
break;
/*
#endif /* CONFIG_WIMAX_GDM72XX_USB_PM */
ret = register_wimax_device(phy_dev, &intf->dev);
+ if (ret)
+ release_usb(udev);
out:
if (ret) {
kfree(phy_dev);
kfree(udev);
+ usb_put_dev(usbdev);
} else {
usb_set_intfdata(intf, phy_dev);
}
uint64_t mask;
unsigned be;
unsigned is_signed;
- unsigned enabled;
unsigned location;
};
while (ent = readdir(dp), ent != NULL) {
if (strcmp(ent->d_name + strlen(ent->d_name) - strlen("_en"),
"_en") == 0) {
+ int current_enabled = 0;
current = &(*ci_array)[count++];
ret = asprintf(&filename,
"%s/%s", scan_el_dir, ent->d_name);
ret = -errno;
goto error_cleanup_array;
}
- fscanf(sysfsfp, "%u", ¤t->enabled);
+ fscanf(sysfsfp, "%u", ¤t_enabled);
fclose(sysfsfp);
- if (!current->enabled) {
+ if (!current_enabled) {
free(filename);
count--;
continue;
}, {
.type = IIO_EV_TYPE_THRESH,
.dir = IIO_EV_DIR_FALLING,
- .mask_separate = BIT(IIO_EV_INFO_VALUE),
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE),
}, {
.type = IIO_EV_TYPE_THRESH,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.scan_index = (_index), \
- .scan_type = IIO_ST('u', _realbits, 16, 12 - (_realbits)), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = (_realbits), \
+ .storagebits = 16, \
+ .shift = 12 - (_realbits), \
+ .endianness = IIO_BE, \
+ }, \
.event_spec = _ev_spec, \
.num_event_specs = _num_ev_spec, \
}
return 0;
error_free_irq:
- free_irq(client->irq, indio_dev);
+ if (client->irq > 0)
+ free_irq(client->irq, indio_dev);
error_cleanup_ring:
ad799x_ring_cleanup(indio_dev);
error_disable_reg:
SHOW_SCALE_AVAILABLE_ATTR(5);
SHOW_SCALE_AVAILABLE_ATTR(6);
SHOW_SCALE_AVAILABLE_ATTR(7);
-SHOW_SCALE_AVAILABLE_ATTR(8);
-SHOW_SCALE_AVAILABLE_ATTR(9);
SHOW_SCALE_AVAILABLE_ATTR(10);
SHOW_SCALE_AVAILABLE_ATTR(11);
SHOW_SCALE_AVAILABLE_ATTR(12);
&iio_dev_attr_in_voltage5_scale_available.dev_attr.attr,
&iio_dev_attr_in_voltage6_scale_available.dev_attr.attr,
&iio_dev_attr_in_voltage7_scale_available.dev_attr.attr,
- &iio_dev_attr_in_voltage8_scale_available.dev_attr.attr,
- &iio_dev_attr_in_voltage9_scale_available.dev_attr.attr,
&iio_dev_attr_in_voltage10_scale_available.dev_attr.attr,
&iio_dev_attr_in_voltage11_scale_available.dev_attr.attr,
&iio_dev_attr_in_voltage12_scale_available.dev_attr.attr,
* of the array.
*/
scale_uv = ((u64)lradc->vref_mv[i] * 100000000) >>
- (iio->channels[i].scan_type.realbits - s);
+ (LRADC_RESOLUTION - s);
lradc->scale_avail[i][s].nano =
do_div(scale_uv, 100000000) * 10;
lradc->scale_avail[i][s].integer = scale_uv;
struct iio_buffer *buffer;
buffer = iio_kfifo_allocate(indio_dev);
- if (buffer)
+ if (!buffer)
return -ENOMEM;
iio_device_attach_buffer(indio_dev, buffer);
imx_drm_device_put();
- drm_vblank_cleanup(imxdrm->drm);
- drm_kms_helper_poll_fini(imxdrm->drm);
- drm_mode_config_cleanup(imxdrm->drm);
+ drm_vblank_cleanup(drm);
+ drm_kms_helper_poll_fini(drm);
+ drm_mode_config_cleanup(drm);
return 0;
}
int imx_drm_crtc_vblank_get(struct imx_drm_crtc *imx_drm_crtc)
{
- return drm_vblank_get(imx_drm_crtc->imxdrm->drm, imx_drm_crtc->pipe);
+ return drm_vblank_get(imx_drm_crtc->crtc->dev, imx_drm_crtc->pipe);
}
EXPORT_SYMBOL_GPL(imx_drm_crtc_vblank_get);
void imx_drm_crtc_vblank_put(struct imx_drm_crtc *imx_drm_crtc)
{
- drm_vblank_put(imx_drm_crtc->imxdrm->drm, imx_drm_crtc->pipe);
+ drm_vblank_put(imx_drm_crtc->crtc->dev, imx_drm_crtc->pipe);
}
EXPORT_SYMBOL_GPL(imx_drm_crtc_vblank_put);
void imx_drm_handle_vblank(struct imx_drm_crtc *imx_drm_crtc)
{
- drm_handle_vblank(imx_drm_crtc->imxdrm->drm, imx_drm_crtc->pipe);
+ drm_handle_vblank(imx_drm_crtc->crtc->dev, imx_drm_crtc->pipe);
}
EXPORT_SYMBOL_GPL(imx_drm_handle_vblank);
drm_mode_group_reinit(imxdrm->drm);
}
-/*
- * register a crtc to the drm core
- */
-static int imx_drm_crtc_register(struct imx_drm_crtc *imx_drm_crtc)
-{
- struct imx_drm_device *imxdrm = __imx_drm_device();
- int ret;
-
- ret = drm_mode_crtc_set_gamma_size(imx_drm_crtc->crtc, 256);
- if (ret)
- return ret;
-
- drm_crtc_helper_add(imx_drm_crtc->crtc,
- imx_drm_crtc->imx_drm_helper_funcs.crtc_helper_funcs);
-
- drm_crtc_init(imxdrm->drm, imx_drm_crtc->crtc,
- imx_drm_crtc->imx_drm_helper_funcs.crtc_funcs);
-
- drm_mode_group_reinit(imxdrm->drm);
-
- return 0;
-}
-
/*
* Called by the CRTC driver when all CRTCs are registered. This
* puts all the pieces together and initializes the driver.
mutex_lock(&imxdrm->mutex);
- drm_kms_helper_poll_init(imxdrm->drm);
+ drm_kms_helper_poll_init(drm);
/* setup the grouping for the legacy output */
- ret = drm_mode_group_init_legacy_group(imxdrm->drm,
- &imxdrm->drm->primary->mode_group);
+ ret = drm_mode_group_init_legacy_group(drm,
+ &drm->primary->mode_group);
if (ret)
goto err_kms;
- ret = drm_vblank_init(imxdrm->drm, MAX_CRTC);
+ ret = drm_vblank_init(drm, MAX_CRTC);
if (ret)
goto err_kms;
* by drm timer once a current process gives up ownership of
* vblank event.(after drm_vblank_put function is called)
*/
- imxdrm->drm->vblank_disable_allowed = true;
+ drm->vblank_disable_allowed = true;
if (!imx_drm_device_get()) {
ret = -EINVAL;
*new_crtc = imx_drm_crtc;
- ret = imx_drm_crtc_register(imx_drm_crtc);
+ ret = drm_mode_crtc_set_gamma_size(imx_drm_crtc->crtc, 256);
if (ret)
goto err_register;
+ drm_crtc_helper_add(crtc,
+ imx_drm_crtc->imx_drm_helper_funcs.crtc_helper_funcs);
+
+ drm_crtc_init(imxdrm->drm, crtc,
+ imx_drm_crtc->imx_drm_helper_funcs.crtc_funcs);
+
+ drm_mode_group_reinit(imxdrm->drm);
+
imx_drm_update_possible_crtcs();
mutex_unlock(&imxdrm->mutex);
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/hdmi.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
YCbCr422_12B = 0x12,
};
-enum hdmi_colorimetry {
- ITU601,
- ITU709,
-};
-
enum imx_hdmi_devtype {
IMX6Q_HDMI,
IMX6DL_HDMI,
if (is_color_space_conversion(hdmi)) {
if (hdmi->hdmi_data.enc_out_format == RGB) {
- if (hdmi->hdmi_data.colorimetry == ITU601)
+ if (hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_601)
csc_coeff = &csc_coeff_rgb_out_eitu601;
else
csc_coeff = &csc_coeff_rgb_out_eitu709;
} else if (hdmi->hdmi_data.enc_in_format == RGB) {
- if (hdmi->hdmi_data.colorimetry == ITU601)
+ if (hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_601)
csc_coeff = &csc_coeff_rgb_in_eitu601;
else
csc_coeff = &csc_coeff_rgb_in_eitu709;
/* Set up colorimetry */
if (hdmi->hdmi_data.enc_out_format == XVYCC444) {
colorimetry = HDMI_FC_AVICONF1_COLORIMETRY_EXTENDED_INFO;
- if (hdmi->hdmi_data.colorimetry == ITU601)
+ if (hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_601)
ext_colorimetry =
HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC601;
- else /* hdmi->hdmi_data.colorimetry == ITU709 */
+ else /*hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_709*/
ext_colorimetry =
HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC709;
} else if (hdmi->hdmi_data.enc_out_format != RGB) {
- if (hdmi->hdmi_data.colorimetry == ITU601)
+ if (hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_601)
colorimetry = HDMI_FC_AVICONF1_COLORIMETRY_SMPTE;
- else /* hdmi->hdmi_data.colorimetry == ITU709 */
+ else /*hdmi->hdmi_data.colorimetry == HDMI_COLORIMETRY_ITU_709*/
colorimetry = HDMI_FC_AVICONF1_COLORIMETRY_ITUR;
ext_colorimetry = HDMI_FC_AVICONF2_EXT_COLORIMETRY_XVYCC601;
} else { /* Carries no data */
(hdmi->vic == 21) || (hdmi->vic == 22) ||
(hdmi->vic == 2) || (hdmi->vic == 3) ||
(hdmi->vic == 17) || (hdmi->vic == 18))
- hdmi->hdmi_data.colorimetry = ITU601;
+ hdmi->hdmi_data.colorimetry = HDMI_COLORIMETRY_ITU_601;
else
- hdmi->hdmi_data.colorimetry = ITU709;
+ hdmi->hdmi_data.colorimetry = HDMI_COLORIMETRY_ITU_709;
if ((hdmi->vic == 10) || (hdmi->vic == 11) ||
(hdmi->vic == 12) || (hdmi->vic == 13) ||
* Other minor misc cleanups...
Please send any patches to Greg Kroah-Hartman <greg@kroah.com>, Andreas Dilger
-<andreas.dilger@intel.com> and Peng Tao <tao.peng@emc.com>. CCing
-hpdd-discuss <hpdd-discuss@lists.01.org> would be great too.
+<andreas.dilger@intel.com>, Oleg Drokin <oleg.drokin@intel.com> and
+Peng Tao <tao.peng@emc.com>. CCing hpdd-discuss <hpdd-discuss@lists.01.org>
+would be great too.
__u16 kuc_msglen; /* Including header */
} __attribute__((aligned(sizeof(__u64))));
+#define KUC_CHANGELOG_MSG_MAXSIZE (sizeof(struct kuc_hdr)+CR_MAXSIZE)
+
#define KUC_MAGIC 0x191C /*Lustre9etLinC */
#define KUC_FL_BLOCK 0x01 /* Wait for send */
do { \
LASSERT(!in_interrupt() || \
((size) <= LIBCFS_VMALLOC_SIZE && \
- ((mask) & GFP_ATOMIC)) != 0); \
+ ((mask) & __GFP_WAIT) == 0)); \
} while (0)
#define LIBCFS_ALLOC_POST(ptr, size) \
{
struct page *page;
- if (is_vmalloc_addr(vaddr)) {
+ if (is_vmalloc_addr((void *)vaddr)) {
page = vmalloc_to_page ((void *)vaddr);
LASSERT (page != NULL);
return page;
int
ksocknal_send(lnet_ni_t *ni, void *private, lnet_msg_t *lntmsg)
{
- int mpflag = 0;
+ int mpflag = 1;
int type = lntmsg->msg_type;
lnet_process_id_t target = lntmsg->msg_target;
unsigned int payload_niov = lntmsg->msg_niov;
/* The first fragment will be set later in pro_pack */
rc = ksocknal_launch_packet(ni, tx, target);
- if (lntmsg->msg_vmflush)
+ if (!mpflag)
cfs_memory_pressure_restore(mpflag);
+
if (rc == 0)
return (0);
*flags |= (error << CLF_HSM_ERR_L);
}
-#define CR_MAXSIZE cfs_size_round(2*NAME_MAX + 1 + sizeof(struct changelog_rec))
+#define CR_MAXSIZE cfs_size_round(2*NAME_MAX + 1 + \
+ sizeof(struct changelog_ext_rec))
struct changelog_rec {
__u16 cr_namelen;
break;
case Q_GETQUOTA:
if (((type == USRQUOTA &&
- uid_eq(current_euid(), make_kuid(&init_user_ns, id))) ||
+ !uid_eq(current_euid(), make_kuid(&init_user_ns, id))) ||
(type == GRPQUOTA &&
!in_egroup_p(make_kgid(&init_user_ns, id)))) &&
(!cfs_capable(CFS_CAP_SYS_ADMIN) ||
{
struct kuc_hdr *lh = (struct kuc_hdr *)buf;
- LASSERT(len <= CR_MAXSIZE);
+ LASSERT(len <= KUC_CHANGELOG_MSG_MAXSIZE);
lh->kuc_magic = KUC_MAGIC;
lh->kuc_transport = KUC_TRANSPORT_CHANGELOG;
CDEBUG(D_CHANGELOG, "changelog to fp=%p start "LPU64"\n",
cs->cs_fp, cs->cs_startrec);
- OBD_ALLOC(cs->cs_buf, CR_MAXSIZE);
+ OBD_ALLOC(cs->cs_buf, KUC_CHANGELOG_MSG_MAXSIZE);
if (cs->cs_buf == NULL)
GOTO(out, rc = -ENOMEM);
if (ctxt)
llog_ctxt_put(ctxt);
if (cs->cs_buf)
- OBD_FREE(cs->cs_buf, CR_MAXSIZE);
+ OBD_FREE(cs->cs_buf, KUC_CHANGELOG_MSG_MAXSIZE);
OBD_FREE_PTR(cs);
return rc;
}
if (usbdev->descriptor.bNumConfigurations != 1) {
dev_err(&interface->dev, "can't handle multiple config\n");
- return -ENODEV;
+ goto failed2;
}
vendor = le16_to_cpu(usbdev->descriptor.idVendor);
return 0;
failed2:
+ usb_put_dev(usbdev);
dev_err(&interface->dev, "probe failed\n");
return -ENODEV;
}
static void go7007_loader_disconnect(struct usb_interface *interface)
{
dev_info(&interface->dev, "disconnect\n");
+ usb_put_dev(interface_to_usbdev(interface));
usb_set_intfdata(interface, NULL);
}
priv->mii_bus->write = xlr_mii_write;
priv->mii_bus->parent = &pdev->dev;
priv->mii_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+ if (priv->mii_bus->irq == NULL) {
+ pr_err("irq alloc failed\n");
+ mdiobus_free(priv->mii_bus);
+ return -ENOMEM;
+ }
priv->mii_bus->irq[priv->phy_addr] = priv->ndev->irq;
/* Scan only the enabled address */
*/
#define MAX_TRANSFER_PACKETS ((1<<10)-1)
-enum {
- USB_CLOCK_TYPE_REF_12,
- USB_CLOCK_TYPE_REF_24,
- USB_CLOCK_TYPE_REF_48,
- USB_CLOCK_TYPE_CRYSTAL_12,
-};
-
/**
* Logical transactions may take numerous low level
* transactions, especially when splits are concerned. This
/* Returns the IO address to push/pop stuff data from the FIFOs */
#define USB_FIFO_ADDRESS(channel, usb_index) (CVMX_USBCX_GOTGCTL(usb_index) + ((channel)+1)*0x1000)
-static int octeon_usb_get_clock_type(void)
-{
- switch (cvmx_sysinfo_get()->board_type) {
- case CVMX_BOARD_TYPE_BBGW_REF:
- case CVMX_BOARD_TYPE_LANAI2_A:
- case CVMX_BOARD_TYPE_LANAI2_U:
- case CVMX_BOARD_TYPE_LANAI2_G:
- case CVMX_BOARD_TYPE_UBNT_E100:
- return USB_CLOCK_TYPE_CRYSTAL_12;
- }
- return USB_CLOCK_TYPE_REF_48;
-}
-
/**
* Read a USB 32bit CSR. It performs the necessary address swizzle
* for 32bit CSRs and logs the value in a readable format if
return 0; /* Data0 */
}
-
-/**
- * Return the number of USB ports supported by this Octeon
- * chip. If the chip doesn't support USB, or is not supported
- * by this API, a zero will be returned. Most Octeon chips
- * support one usb port, but some support two ports.
- * cvmx_usb_initialize() must be called on independent
- * struct cvmx_usb_state.
- *
- * Returns: Number of port, zero if usb isn't supported
- */
-static int cvmx_usb_get_num_ports(void)
-{
- int arch_ports = 0;
-
- if (OCTEON_IS_MODEL(OCTEON_CN56XX))
- arch_ports = 1;
- else if (OCTEON_IS_MODEL(OCTEON_CN52XX))
- arch_ports = 2;
- else if (OCTEON_IS_MODEL(OCTEON_CN50XX))
- arch_ports = 1;
- else if (OCTEON_IS_MODEL(OCTEON_CN31XX))
- arch_ports = 1;
- else if (OCTEON_IS_MODEL(OCTEON_CN30XX))
- arch_ports = 1;
- else
- arch_ports = 0;
-
- return arch_ports;
-}
-
/**
* Initialize a USB port for use. This must be called before any
* other access to the Octeon USB port is made. The port starts
* Returns: 0 or a negative error code.
*/
static int cvmx_usb_initialize(struct cvmx_usb_state *usb,
- int usb_port_number)
+ int usb_port_number,
+ enum cvmx_usb_initialize_flags flags)
{
union cvmx_usbnx_clk_ctl usbn_clk_ctl;
union cvmx_usbnx_usbp_ctl_status usbn_usbp_ctl_status;
- enum cvmx_usb_initialize_flags flags = 0;
int i;
/* At first allow 0-1 for the usb port number */
if ((usb_port_number < 0) || (usb_port_number > 1))
return -EINVAL;
- /* For all chips except 52XX there is only one port */
- if (!OCTEON_IS_MODEL(OCTEON_CN52XX) && (usb_port_number > 0))
- return -EINVAL;
- /* Try to determine clock type automatically */
- if (octeon_usb_get_clock_type() == USB_CLOCK_TYPE_CRYSTAL_12) {
- /* Only 12 MHZ crystals are supported */
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
- } else {
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
-
- switch (octeon_usb_get_clock_type()) {
- case USB_CLOCK_TYPE_REF_12:
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
- break;
- case USB_CLOCK_TYPE_REF_24:
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
- break;
- case USB_CLOCK_TYPE_REF_48:
- flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
- break;
- default:
- return -EINVAL;
- break;
- }
- }
memset(usb, 0, sizeof(*usb));
usb->init_flags = flags;
return 0;
}
-
static const struct hc_driver octeon_hc_driver = {
.description = "Octeon USB",
.product_desc = "Octeon Host Controller",
.hub_control = octeon_usb_hub_control,
};
-
-static int octeon_usb_driver_probe(struct device *dev)
+static int octeon_usb_probe(struct platform_device *pdev)
{
int status;
- int usb_num = to_platform_device(dev)->id;
- int irq = platform_get_irq(to_platform_device(dev), 0);
+ int initialize_flags;
+ int usb_num;
+ struct resource *res_mem;
+ struct device_node *usbn_node;
+ int irq = platform_get_irq(pdev, 0);
+ struct device *dev = &pdev->dev;
struct octeon_hcd *priv;
struct usb_hcd *hcd;
unsigned long flags;
+ u32 clock_rate = 48000000;
+ bool is_crystal_clock = false;
+ const char *clock_type;
+ int i;
+
+ if (dev->of_node == NULL) {
+ dev_err(dev, "Error: empty of_node\n");
+ return -ENXIO;
+ }
+ usbn_node = dev->of_node->parent;
+
+ i = of_property_read_u32(usbn_node,
+ "refclk-frequency", &clock_rate);
+ if (i) {
+ dev_err(dev, "No USBN \"refclk-frequency\"\n");
+ return -ENXIO;
+ }
+ switch (clock_rate) {
+ case 12000000:
+ initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_12MHZ;
+ break;
+ case 24000000:
+ initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_24MHZ;
+ break;
+ case 48000000:
+ initialize_flags = CVMX_USB_INITIALIZE_FLAGS_CLOCK_48MHZ;
+ break;
+ default:
+ dev_err(dev, "Illebal USBN \"refclk-frequency\" %u\n", clock_rate);
+ return -ENXIO;
+
+ }
+
+ i = of_property_read_string(usbn_node,
+ "refclk-type", &clock_type);
+
+ if (!i && strcmp("crystal", clock_type) == 0)
+ is_crystal_clock = true;
+
+ if (is_crystal_clock)
+ initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_XI;
+ else
+ initialize_flags |= CVMX_USB_INITIALIZE_FLAGS_CLOCK_XO_GND;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res_mem == NULL) {
+ dev_err(dev, "found no memory resource\n");
+ return -ENXIO;
+ }
+ usb_num = (res_mem->start >> 44) & 1;
+
+ if (irq < 0) {
+ /* Defective device tree, but we know how to fix it. */
+ irq_hw_number_t hwirq = usb_num ? (1 << 6) + 17 : 56;
+ irq = irq_create_mapping(NULL, hwirq);
+ }
/*
* Set the DMA mask to 64bits so we get buffers already translated for
dev->coherent_dma_mask = ~0;
dev->dma_mask = &dev->coherent_dma_mask;
+ /*
+ * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
+ * IOB priority registers. Under heavy network load USB
+ * hardware can be starved by the IOB causing a crash. Give
+ * it a priority boost if it has been waiting more than 400
+ * cycles to avoid this situation.
+ *
+ * Testing indicates that a cnt_val of 8192 is not sufficient,
+ * but no failures are seen with 4096. We choose a value of
+ * 400 to give a safety factor of 10.
+ */
+ if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
+ union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
+
+ pri_cnt.u64 = 0;
+ pri_cnt.s.cnt_enb = 1;
+ pri_cnt.s.cnt_val = 400;
+ cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
+ }
+
hcd = usb_create_hcd(&octeon_hc_driver, dev, dev_name(dev));
if (!hcd) {
dev_dbg(dev, "Failed to allocate memory for HCD\n");
tasklet_init(&priv->dequeue_tasklet, octeon_usb_urb_dequeue_work, (unsigned long)priv);
INIT_LIST_HEAD(&priv->dequeue_list);
- status = cvmx_usb_initialize(&priv->usb, usb_num);
+ status = cvmx_usb_initialize(&priv->usb, usb_num, initialize_flags);
if (status) {
dev_dbg(dev, "USB initialization failed with %d\n", status);
kfree(hcd);
cvmx_usb_poll(&priv->usb);
spin_unlock_irqrestore(&priv->lock, flags);
- status = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ status = usb_add_hcd(hcd, irq, 0);
if (status) {
dev_dbg(dev, "USB add HCD failed with %d\n", status);
kfree(hcd);
}
device_wakeup_enable(hcd->self.controller);
- dev_dbg(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
+ dev_info(dev, "Registered HCD for port %d on irq %d\n", usb_num, irq);
return 0;
}
-static int octeon_usb_driver_remove(struct device *dev)
+static int octeon_usb_remove(struct platform_device *pdev)
{
int status;
+ struct device *dev = &pdev->dev;
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct octeon_hcd *priv = hcd_to_octeon(hcd);
unsigned long flags;
return 0;
}
-static struct device_driver octeon_usb_driver = {
- .name = "OcteonUSB",
- .bus = &platform_bus_type,
- .probe = octeon_usb_driver_probe,
- .remove = octeon_usb_driver_remove,
+static struct of_device_id octeon_usb_match[] = {
+ {
+ .compatible = "cavium,octeon-5750-usbc",
+ },
+ {},
};
+static struct platform_driver octeon_usb_driver = {
+ .driver = {
+ .name = "OcteonUSB",
+ .owner = THIS_MODULE,
+ .of_match_table = octeon_usb_match,
+ },
+ .probe = octeon_usb_probe,
+ .remove = octeon_usb_remove,
+};
-#define MAX_USB_PORTS 10
-static struct platform_device *pdev_glob[MAX_USB_PORTS];
-static int octeon_usb_registered;
-static int __init octeon_usb_module_init(void)
+static int __init octeon_usb_driver_init(void)
{
- int num_devices = cvmx_usb_get_num_ports();
- int device;
-
- if (usb_disabled() || num_devices == 0)
- return -ENODEV;
-
- if (driver_register(&octeon_usb_driver))
- return -ENOMEM;
-
- octeon_usb_registered = 1;
-
- /*
- * Only cn52XX and cn56XX have DWC_OTG USB hardware and the
- * IOB priority registers. Under heavy network load USB
- * hardware can be starved by the IOB causing a crash. Give
- * it a priority boost if it has been waiting more than 400
- * cycles to avoid this situation.
- *
- * Testing indicates that a cnt_val of 8192 is not sufficient,
- * but no failures are seen with 4096. We choose a value of
- * 400 to give a safety factor of 10.
- */
- if (OCTEON_IS_MODEL(OCTEON_CN52XX) || OCTEON_IS_MODEL(OCTEON_CN56XX)) {
- union cvmx_iob_n2c_l2c_pri_cnt pri_cnt;
-
- pri_cnt.u64 = 0;
- pri_cnt.s.cnt_enb = 1;
- pri_cnt.s.cnt_val = 400;
- cvmx_write_csr(CVMX_IOB_N2C_L2C_PRI_CNT, pri_cnt.u64);
- }
-
- for (device = 0; device < num_devices; device++) {
- struct resource irq_resource;
- struct platform_device *pdev;
- memset(&irq_resource, 0, sizeof(irq_resource));
- irq_resource.start = (device == 0) ? OCTEON_IRQ_USB0 : OCTEON_IRQ_USB1;
- irq_resource.end = irq_resource.start;
- irq_resource.flags = IORESOURCE_IRQ;
- pdev = platform_device_register_simple((char *)octeon_usb_driver. name, device, &irq_resource, 1);
- if (IS_ERR(pdev)) {
- driver_unregister(&octeon_usb_driver);
- octeon_usb_registered = 0;
- return PTR_ERR(pdev);
- }
- if (device < MAX_USB_PORTS)
- pdev_glob[device] = pdev;
+ if (usb_disabled())
+ return 0;
- }
- return 0;
+ return platform_driver_register(&octeon_usb_driver);
}
+module_init(octeon_usb_driver_init);
-static void __exit octeon_usb_module_cleanup(void)
+static void __exit octeon_usb_driver_exit(void)
{
- int i;
+ if (usb_disabled())
+ return;
- for (i = 0; i < MAX_USB_PORTS; i++)
- if (pdev_glob[i]) {
- platform_device_unregister(pdev_glob[i]);
- pdev_glob[i] = NULL;
- }
- if (octeon_usb_registered)
- driver_unregister(&octeon_usb_driver);
+ platform_driver_unregister(&octeon_usb_driver);
}
+module_exit(octeon_usb_driver_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Cavium Networks <support@caviumnetworks.com>");
-MODULE_DESCRIPTION("Cavium Networks Octeon USB Host driver.");
-module_init(octeon_usb_module_init);
-module_exit(octeon_usb_module_cleanup);
+MODULE_AUTHOR("Cavium, Inc. <support@cavium.com>");
+MODULE_DESCRIPTION("Cavium Inc. OCTEON USB Host driver.");
if (binding) {
binding->ptype.type = __constant_htons(OZ_ETHERTYPE);
binding->ptype.func = oz_pkt_recv;
- memcpy(binding->name, net_dev, OZ_MAX_BINDING_LEN);
if (net_dev && *net_dev) {
+ memcpy(binding->name, net_dev, OZ_MAX_BINDING_LEN);
oz_dbg(ON, "Adding binding: %s\n", net_dev);
binding->ptype.dev =
dev_get_by_name(&init_net, net_dev);
}
} else {
oz_dbg(ON, "Binding to all netcards\n");
+ memset(binding->name, 0, OZ_MAX_BINDING_LEN);
binding->ptype.dev = NULL;
}
if (binding) {
unsigned char *pbuf;
u32 wpa_ielen = 0;
u8 *pbssid = GetAddr3Ptr(pframe);
- u32 hidden_ssid = 0;
struct HT_info_element *pht_info = NULL;
struct rtw_ieee80211_ht_cap *pht_cap = NULL;
u32 bcn_channel;
unsigned short ht_cap_info;
unsigned char ht_info_infos_0;
+ int ssid_len;
if (is_client_associated_to_ap(Adapter) == false)
return true;
}
/* checking SSID */
+ ssid_len = 0;
p = rtw_get_ie(bssid->IEs + _FIXED_IE_LENGTH_, _SSID_IE_, &len, bssid->IELength - _FIXED_IE_LENGTH_);
- if (p == NULL) {
- DBG_88E("%s marc: cannot find SSID for survey event\n", __func__);
- hidden_ssid = true;
- } else {
- hidden_ssid = false;
- }
-
- if ((NULL != p) && (false == hidden_ssid && (*(p + 1)))) {
- memcpy(bssid->Ssid.Ssid, (p + 2), *(p + 1));
- bssid->Ssid.SsidLength = *(p + 1);
- } else {
- bssid->Ssid.SsidLength = 0;
- bssid->Ssid.Ssid[0] = '\0';
+ if (p) {
+ ssid_len = *(p + 1);
+ if (ssid_len > NDIS_802_11_LENGTH_SSID)
+ ssid_len = 0;
}
+ memcpy(bssid->Ssid.Ssid, (p + 2), ssid_len);
+ bssid->Ssid.SsidLength = ssid_len;
RT_TRACE(_module_rtl871x_mlme_c_, _drv_info_, ("%s bssid.Ssid.Ssid:%s bssid.Ssid.SsidLength:%d "
"cur_network->network.Ssid.Ssid:%s len:%d\n", __func__, bssid->Ssid.Ssid,
("rtw_mp_ioctl_hdl: subcode [%d], len[%d], buffer_len[%d]\r\n",
poidparam->subcode, poidparam->len, len));
- if (poidparam->subcode >= MAX_MP_IOCTL_SUBCODE) {
+ if (poidparam->subcode >= ARRAY_SIZE(mp_ioctl_hdl)) {
RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_err_, ("no matching drvext subcodes\r\n"));
ret = -EINVAL;
goto _rtw_mp_ioctl_hdl_exit;
u8 *p2pie;
uint p2pielen = 0, attr_contentlen = 0;
u8 attr_content[100] = {0x00};
-
- u8 go_devadd_str[17 + 10] = {0x00};
- /* +10 is for the str "go_devadd =", we have to clear it at wrqu->data.pointer */
+ u8 go_devadd_str[17 + 12] = {};
/* Commented by Albert 20121209 */
/* The input data is the GO's interface address which the application wants to know its device address. */
spin_unlock_bh(&pmlmepriv->scanned_queue.lock);
if (!blnMatch)
- sprintf(go_devadd_str, "\n\ndev_add = NULL");
+ snprintf(go_devadd_str, sizeof(go_devadd_str), "\n\ndev_add = NULL");
else
- sprintf(go_devadd_str, "\n\ndev_add =%.2X:%.2X:%.2X:%.2X:%.2X:%.2X",
+ snprintf(go_devadd_str, sizeof(go_devadd_str), "\n\ndev_add =%.2X:%.2X:%.2X:%.2X:%.2X:%.2X",
attr_content[0], attr_content[1], attr_content[2], attr_content[3], attr_content[4], attr_content[5]);
- if (copy_to_user(wrqu->data.pointer, go_devadd_str, 10 + 17))
+ if (copy_to_user(wrqu->data.pointer, go_devadd_str, sizeof(go_devadd_str)))
return -EFAULT;
return ret;
}
{USB_DEVICE(USB_VENDER_ID_REALTEK, 0x0179)}, /* 8188ETV */
/*=== Customer ID ===*/
/****** 8188EUS ********/
- {USB_DEVICE(0x8179, 0x07B8)}, /* Abocom - Abocom */
+ {USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */
{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
{} /* Terminating entry */
};
config R8821AE
tristate "RealTek RTL8821AE Wireless LAN NIC driver"
- depends on PCI && WLAN
+ depends on PCI && WLAN && MAC80211
depends on m
select WIRELESS_EXT
select WEXT_PRIV
/*88e tx power tracking*/
- u8 bb_swing_idx_ofdm[2];
+ u8 bb_swing_idx_ofdm[MAX_RF_PATH];
u8 bb_swing_idx_ofdm_current;
u8 bb_swing_idx_ofdm_base[MAX_RF_PATH];
bool bb_swing_flag_Ofdm;
struct pool *p;
p = calloc(1, sizeof(struct pool));
- if (!p) {
- free(p);
+ if (!p)
return NULL;
- }
p->mem = calloc(1, size);
- if (!p->mem)
+ if (!p->mem) {
+ free(p);
return NULL;
+ }
p->next = pool_head;
pool_head = p;
case USB_SPEED_WIRELESS:
break;
default:
- pr_err("speed %d\n", speed);
+ pr_err("Failed attach request for unsupported USB speed: %s\n",
+ usb_speed_string(speed));
return -EINVAL;
}
goto out;
}
- if (data->flags != 0 && data->length > HCF_MAX_NAME_LEN + 1) {
+ if (data->flags != 0 && data->length > HCF_MAX_NAME_LEN) {
ret = -EINVAL;
goto out;
}
u32 last_statsn;
int found_cmd;
- if (conn->exp_statsn > begrun) {
+ if (!begrun) {
+ begrun = conn->exp_statsn;
+ } else if (conn->exp_statsn > begrun) {
pr_err("Got Status SNACK Begrun: 0x%08x, RunLength:"
" 0x%08x but already got ExpStatSN: 0x%08x on CID:"
" %hu.\n", begrun, runlength, conn->exp_statsn,
if (segment_mult) {
u64 tmp = lba;
- start_lba = sector_div(tmp, segment_size * segment_mult);
+ start_lba = do_div(tmp, segment_size * segment_mult);
last_lba = first_lba + segment_size - 1;
if (start_lba >= first_lba &&
struct t10_reservation *pr_tmpl = &dev->t10_pr;
unsigned char isid_buf[PR_REG_ISID_LEN], *isid_ptr = NULL;
sense_reason_t ret = TCM_NO_SENSE;
- int pr_holder = 0;
+ int pr_holder = 0, type;
if (!se_sess || !se_lun) {
pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n");
ret = TCM_RESERVATION_CONFLICT;
goto out;
}
+ type = pr_reg->pr_res_type;
spin_lock(&pr_tmpl->registration_lock);
/*
* Release the calling I_T Nexus registration now..
*/
__core_scsi3_free_registration(cmd->se_dev, pr_reg, NULL, 1);
+ pr_reg = NULL;
/*
* From spc4r17, section 5.7.11.3 Unregistering
* RESERVATIONS RELEASED.
*/
if (pr_holder &&
- (pr_reg->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY ||
- pr_reg->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY)) {
+ (type == PR_TYPE_WRITE_EXCLUSIVE_REGONLY ||
+ type == PR_TYPE_EXCLUSIVE_ACCESS_REGONLY)) {
list_for_each_entry(pr_reg_p,
&pr_tmpl->registration_list,
pr_reg_list) {
ret = core_scsi3_update_and_write_aptpl(dev, aptpl);
out:
- core_scsi3_put_pr_reg(pr_reg);
+ if (pr_reg)
+ core_scsi3_put_pr_reg(pr_reg);
return ret;
}
struct scatterlist *psg;
void *paddr, *addr;
unsigned int i, len, left;
+ unsigned int offset = 0;
left = sectors * dev->prot_length;
for_each_sg(cmd->t_prot_sg, psg, cmd->t_prot_nents, i) {
len = min(psg->length, left);
+ if (offset >= sg->length) {
+ sg = sg_next(sg);
+ offset = 0;
+ sg_off = sg->offset;
+ }
+
paddr = kmap_atomic(sg_page(psg)) + psg->offset;
addr = kmap_atomic(sg_page(sg)) + sg_off;
memcpy(addr, paddr, len);
left -= len;
+ offset += len;
kunmap_atomic(paddr);
kunmap_atomic(addr);
}
padding = ((-scsi_target_len) & 3);
if (padding)
scsi_target_len += padding;
- if (scsi_name_len > 256)
- scsi_name_len = 256;
+ if (scsi_target_len > 256)
+ scsi_target_len = 256;
buf[off-1] = scsi_target_len;
off += scsi_target_len;
return;
}
- if (!success)
- cmd->transport_state |= CMD_T_FAILED;
-
/*
* Check for case where an explicit ABORT_TASK has been received
* and transport_wait_for_tasks() will be waiting for completion..
spin_unlock_irqrestore(&cmd->t_state_lock, flags);
complete(&cmd->t_transport_stop_comp);
return;
- } else if (cmd->transport_state & CMD_T_FAILED) {
+ } else if (!success) {
INIT_WORK(&cmd->work, target_complete_failure_work);
} else {
INIT_WORK(&cmd->work, target_complete_ok_work);
config KIRKWOOD_THERMAL
tristate "Temperature sensor on Marvell Kirkwood SoCs"
- depends on ARCH_KIRKWOOD
+ depends on ARCH_KIRKWOOD || MACH_KIRKWOOD
depends on OF
help
Support for the Kirkwood thermal sensor driver into the Linux thermal
/* Register as a vio device to receive callbacks */
return platform_driver_register(&hvc_opal_driver);
}
-module_init(hvc_opal_init);
-
-static void __exit hvc_opal_exit(void)
-{
- platform_driver_unregister(&hvc_opal_driver);
-}
-module_exit(hvc_opal_exit);
+device_initcall(hvc_opal_init);
static void udbg_opal_putc(char c)
{
return 0;
}
-module_init(hvc_rtas_init);
-
-/* This will tear down the tty portion of the driver */
-static void __exit hvc_rtas_exit(void)
-{
- /* Really the fun isn't over until the worker thread breaks down and
- * the tty cleans up */
- if (hvc_rtas_dev)
- hvc_remove(hvc_rtas_dev);
-}
-module_exit(hvc_rtas_exit);
+device_initcall(hvc_rtas_init);
/* This will happen prior to module init. There is no tty at this time? */
static int __init hvc_rtas_console_init(void)
return 0;
}
-module_init(hvc_udbg_init);
-
-static void __exit hvc_udbg_exit(void)
-{
- if (hvc_udbg_dev)
- hvc_remove(hvc_udbg_dev);
-}
-module_exit(hvc_udbg_exit);
+device_initcall(hvc_udbg_init);
static int __init hvc_udbg_console_init(void)
{
#endif
return r;
}
-
-static void __exit xen_hvc_fini(void)
-{
- struct xencons_info *entry, *next;
-
- if (list_empty(&xenconsoles))
- return;
-
- list_for_each_entry_safe(entry, next, &xenconsoles, list) {
- xen_console_remove(entry);
- }
-}
+device_initcall(xen_hvc_init);
static int xen_cons_init(void)
{
hvc_instantiate(HVC_COOKIE, 0, ops);
return 0;
}
-
-
-module_init(xen_hvc_init);
-module_exit(xen_hvc_fini);
console_initcall(xen_cons_init);
#ifdef CONFIG_EARLY_PRINTK
{
unsigned int addr = 0;
unsigned int modem = 0;
+ unsigned int brk = 0;
struct gsm_dlci *dlci;
int len = clen;
u8 *dp = data;
if (len == 0)
return;
}
+ len--;
+ if (len > 0) {
+ while (gsm_read_ea(&brk, *dp++) == 0) {
+ len--;
+ if (len == 0)
+ return;
+ }
+ modem <<= 7;
+ modem |= (brk & 0x7f);
+ }
tty = tty_port_tty_get(&dlci->port);
gsm_process_modem(tty, dlci, modem, clen);
if (tty) {
struct n_tty_data *ldata = tty->disc_data;
size_t echoed;
- if ((!L_ECHO(tty) && !L_ECHONL(tty)) ||
- ldata->echo_mark == ldata->echo_tail)
+ if (ldata->echo_mark == ldata->echo_tail)
return;
mutex_lock(&ldata->output_lock);
if (L_ECHO(tty)) {
echo_char(c, tty);
commit_echoes(tty);
- }
+ } else
+ process_echoes(tty);
isig(signal, tty);
return;
}
if (I_IXON(tty)) {
if (c == START_CHAR(tty)) {
start_tty(tty);
- commit_echoes(tty);
+ process_echoes(tty);
return 0;
}
if (c == STOP_CHAR(tty)) {
* Fix tty hang when I_IXON(tty) is cleared, but the tty
* been stopped by STOP_CHAR(tty) before it.
*/
- if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped)
+ if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) {
start_tty(tty);
+ process_echoes(tty);
+ }
/* The termios change make the tty ready for I/O */
if (waitqueue_active(&tty->write_wait))
static inline int input_available_p(struct tty_struct *tty, int poll)
{
struct n_tty_data *ldata = tty->disc_data;
- int amt = poll && !TIME_CHAR(tty) ? MIN_CHAR(tty) : 1;
+ int amt = poll && !TIME_CHAR(tty) && MIN_CHAR(tty) ? MIN_CHAR(tty) : 1;
if (ldata->icanon && !L_EXTPROC(tty)) {
if (ldata->canon_head != ldata->read_tail)
serial_dl_write(up, quot);
+ /*
+ * XR17V35x UARTs have an extra fractional divisor register (DLD)
+ *
+ * We need to recalculate all of the registers, because DLM and DLL
+ * are already rounded to a whole integer.
+ *
+ * When recalculating we use a 32x clock instead of a 16x clock to
+ * allow 1-bit for rounding in the fractional part.
+ */
+ if (up->port.type == PORT_XR17V35X) {
+ unsigned int baud_x32 = (port->uartclk * 2) / baud;
+ u16 quot = baud_x32 / 32;
+ u8 quot_frac = DIV_ROUND_CLOSEST(baud_x32 % 32, 2);
+
+ serial_dl_write(up, quot);
+ serial_port_out(port, 0x2, quot_frac & 0xf);
+ }
+
/*
* LCR DLAB must be set to enable 64-byte FIFO mode. If the FCR
* is written without DLAB set, this mode will be disabled.
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int dw8250_suspend(struct device *dev)
{
struct dw8250_data *data = dev_get_drvdata(dev);
return 0;
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_PM_RUNTIME
static int dw8250_runtime_suspend(struct device *dev)
{
unsigned int bar;
- if ((priv->dev->subsystem_device & 0xff00) == 0x3000) {
+ if ((priv->dev->device != PCI_DEVICE_ID_NETMOS_9865) &&
+ (priv->dev->subsystem_device & 0xff00) == 0x3000) {
/* netmos apparently orders BARs by datasheet layout, so serial
* ports get BARs 0 and 3 (or 1 and 4 for memmapped)
*/
config SERIAL_MSM
bool "MSM on-chip serial port support"
- depends on ARCH_MSM
+ depends on ARCH_MSM || ARCH_QCOM
select SERIAL_CORE
config SERIAL_MSM_CONSOLE
return retval;
}
disable_irq(up->wakeirq);
- } else {
- dev_info(up->port.dev, "no wakeirq for uart%d\n",
- up->port.line);
}
dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
flags & SER_RS485_RTS_AFTER_SEND);
if (ret < 0)
return ret;
- } else
+ } else if (up->rts_gpio == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else {
up->rts_gpio = -EINVAL;
+ }
if (of_property_read_u32_array(np, "rs485-rts-delay",
rs485_delay, 2) == 0) {
up->port.iotype = UPIO_MEM;
up->port.irq = uartirq;
up->wakeirq = wakeirq;
+ if (!up->wakeirq)
+ dev_info(up->port.dev, "no wakeirq for uart%d\n",
+ up->port.line);
up->port.regshift = 2;
up->port.fifosize = 64;
wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
SIRFUART_IO_MODE);
- sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
spin_unlock_irqrestore(&sirfport->rx_lock, flags);
+ spin_lock(&port->lock);
+ sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count);
+ spin_unlock(&port->lock);
if (sirfport->rx_io_count == 4) {
spin_lock_irqsave(&sirfport->rx_lock, flags);
sirfport->rx_io_count = 0;
* @p: output buffer of at least 7 bytes
*
* Generate a name from a driver reference and write it to the output
- * buffer.
+ * buffer. Return the number of bytes written.
*
* Locking: None
*/
-static void tty_line_name(struct tty_driver *driver, int index, char *p)
+static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
{
if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
- strcpy(p, driver->name);
+ return sprintf(p, "%s", driver->name);
else
- sprintf(p, "%s%d", driver->name, index + driver->name_base);
+ return sprintf(p, "%s%d", driver->name,
+ index + driver->name_base);
}
/**
if (i >= ARRAY_SIZE(cs))
break;
}
- while (i--)
- count += sprintf(buf + count, "%s%d%c",
- cs[i]->name, cs[i]->index, i ? ' ':'\n');
+ while (i--) {
+ struct tty_driver *driver;
+ const char *name = cs[i]->name;
+ int index = cs[i]->index;
+
+ driver = cs[i]->device(cs[i], &index);
+ if (driver) {
+ count += tty_line_name(driver, index, buf + count);
+ count += sprintf(buf + count, "%c", i ? ' ':'\n');
+ } else
+ count += sprintf(buf + count, "%s%d%c",
+ name, index, i ? ' ':'\n');
+ }
console_unlock();
return count;
scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char,
vc->vc_screenbuf_size >> 1);
set_origin(vc);
+ if (CON_IS_VISIBLE(vc))
+ update_screen(vc);
/* fall through */
case 2: /* erase whole display */
count = vc->vc_cols * vc->vc_rows;
dynid->id.idProduct = idProduct;
dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
if (fields > 2 && bInterfaceClass) {
- if (bInterfaceClass > 255)
- return -EINVAL;
+ if (bInterfaceClass > 255) {
+ retval = -EINVAL;
+ goto fail;
+ }
dynid->id.bInterfaceClass = (u8)bInterfaceClass;
dynid->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS;
if (fields > 4) {
const struct usb_device_id *id = id_table;
- if (!id)
- return -ENODEV;
+ if (!id) {
+ retval = -ENODEV;
+ goto fail;
+ }
for (; id->match_flags; id++)
if (id->idVendor == refVendor && id->idProduct == refProduct)
break;
- if (id->match_flags)
+ if (id->match_flags) {
dynid->id.driver_info = id->driver_info;
- else
- return -ENODEV;
+ } else {
+ retval = -ENODEV;
+ goto fail;
+ }
}
spin_lock(&dynids->lock);
if (retval)
return retval;
return count;
+
+fail:
+ kfree(dynid);
+ return retval;
}
EXPORT_SYMBOL_GPL(usb_store_new_id);
dev_name(&usb_dev->dev), retval);
return retval;
}
- usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
}
retval = usb_new_device (usb_dev);
return usb_get_intfdata(hdev->actconfig->interface[0]);
}
-int usb_device_supports_lpm(struct usb_device *udev)
+static int usb_device_supports_lpm(struct usb_device *udev)
{
/* USB 2.1 (and greater) devices indicate LPM support through
* their USB 2.0 Extended Capabilities BOS descriptor.
"Power management will be impacted.\n");
return 0;
}
-
- /* udev is root hub */
- if (!udev->parent)
- return 1;
-
if (udev->parent->lpm_capable)
return 1;
unsigned int size);
extern int usb_get_bos_descriptor(struct usb_device *dev);
extern void usb_release_bos_descriptor(struct usb_device *dev);
-extern int usb_device_supports_lpm(struct usb_device *udev);
extern char *usb_cache_string(struct usb_device *udev, int index);
extern int usb_set_configuration(struct usb_device *dev, int configuration);
extern int usb_choose_configuration(struct usb_device *udev);
int retval = 0;
if (!select_phy)
- return -ENODEV;
+ return 0;
usbcfg = readl(hsotg->regs + GUSBCFG);
struct usb_host_endpoint *ep)
{
struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
- int is_control = usb_endpoint_xfer_control(&ep->desc);
- int is_out = usb_endpoint_dir_out(&ep->desc);
- int epnum = usb_endpoint_num(&ep->desc);
- struct usb_device *udev;
unsigned long flags;
dev_dbg(hsotg->dev,
"DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n",
ep->desc.bEndpointAddress);
- udev = to_usb_device(hsotg->dev);
-
spin_lock_irqsave(&hsotg->lock, flags);
-
- usb_settoggle(udev, epnum, is_out, 0);
- if (is_control)
- usb_settoggle(udev, epnum, !is_out, 0);
dwc2_hcd_endpoint_reset(hsotg, ep);
-
spin_unlock_irqrestore(&hsotg->lock, flags);
}
int retval;
int irq;
+ if (usb_disabled())
+ return -ENODEV;
+
match = of_match_device(dwc2_of_match_table, &dev->dev);
if (match && match->data) {
params = match->data;
addr, (unsigned int)temp);
addr = &ir_set->erst_base;
- temp_64 = readq(addr);
+ temp_64 = xhci_read_64(xhci, addr);
xhci_dbg(xhci, " %p: ir_set.erst_base = @%08llx\n",
addr, temp_64);
addr = &ir_set->erst_dequeue;
- temp_64 = readq(addr);
+ temp_64 = xhci_read_64(xhci, addr);
xhci_dbg(xhci, " %p: ir_set.erst_dequeue = @%08llx\n",
addr, temp_64);
}
{
u64 val;
- val = readq(&xhci->op_regs->cmd_ring);
+ val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n",
lower_32_bits(val));
xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n",
xhci_warn(xhci, "WARN something wrong with SW event ring "
"dequeue ptr.\n");
/* Update HC event ring dequeue pointer */
- temp = readq(&xhci->ir_set->erst_dequeue);
+ temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
temp &= ERST_PTR_MASK;
/* Don't clear the EHB bit (which is RW1C) because
* there might be more events to service.
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Write event ring dequeue pointer, "
"preserving EHB bit");
- writeq(((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+ xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
&xhci->ir_set->erst_dequeue);
}
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Device context base array address = 0x%llx (DMA), %p (virt)",
(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
- writeq(dma, &xhci->op_regs->dcbaa_ptr);
+ xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
/*
* Initialize the ring segment pool. The ring must be a contiguous
(unsigned long long)xhci->cmd_ring->first_seg->dma);
/* Set the address in the Command Ring Control register */
- val_64 = readq(&xhci->op_regs->cmd_ring);
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
xhci->cmd_ring->cycle_state;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Setting command ring address to 0x%x", val);
- writeq(val_64, &xhci->op_regs->cmd_ring);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
xhci_dbg_cmd_ptrs(xhci);
xhci->lpm_command = xhci_alloc_command(xhci, true, true, flags);
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Set ERST base address for ir_set 0 = 0x%llx",
(unsigned long long)xhci->erst.erst_dma_addr);
- val_64 = readq(&xhci->ir_set->erst_base);
+ val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
val_64 &= ERST_PTR_MASK;
val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
- writeq(val_64, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
/* Set the event ring dequeue address */
xhci_set_hc_event_deq(xhci);
"QUIRK: Resetting on resume");
xhci->quirks |= XHCI_TRUST_TX_LENGTH;
}
+ if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
+ pdev->device == 0x0015 &&
+ pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG &&
+ pdev->subsystem_device == 0xc0cd)
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
if (pdev->vendor == PCI_VENDOR_ID_VIA)
xhci->quirks |= XHCI_RESET_ON_RESUME;
}
return 0;
}
- temp_64 = readq(&xhci->op_regs->cmd_ring);
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
if (!(temp_64 & CMD_RING_RUNNING)) {
xhci_dbg(xhci, "Command ring had been stopped\n");
return 0;
}
xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
- writeq(temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
+ xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+ &xhci->op_regs->cmd_ring);
/* Section 4.6.1.2 of xHCI 1.0 spec says software should
* time the completion od all xHCI commands, including
/* Clear the event handler busy flag (RW1C);
* the event ring should be empty.
*/
- temp_64 = readq(&xhci->ir_set->erst_dequeue);
- writeq(temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB,
+ &xhci->ir_set->erst_dequeue);
spin_unlock(&xhci->lock);
return IRQ_HANDLED;
*/
while (xhci_handle_event(xhci) > 0) {}
- temp_64 = readq(&xhci->ir_set->erst_dequeue);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
/* If necessary, update the HW's version of the event ring deq ptr. */
if (event_ring_deq != xhci->event_ring->dequeue) {
deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
/* Clear the event handler busy flag (RW1C); event ring is empty. */
temp_64 |= ERST_EHB;
- writeq(temp_64, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
spin_unlock(&xhci->lock);
}
while (1) {
- if (room_on_ring(xhci, ep_ring, num_trbs)) {
- union xhci_trb *trb = ep_ring->enqueue;
- unsigned int usable = ep_ring->enq_seg->trbs +
- TRBS_PER_SEGMENT - 1 - trb;
- u32 nop_cmd;
-
- /*
- * Section 4.11.7.1 TD Fragments states that a link
- * TRB must only occur at the boundary between
- * data bursts (eg 512 bytes for 480M).
- * While it is possible to split a large fragment
- * we don't know the size yet.
- * Simplest solution is to fill the trb before the
- * LINK with nop commands.
- */
- if (num_trbs == 1 || num_trbs <= usable || usable == 0)
- break;
-
- if (ep_ring->type != TYPE_BULK)
- /*
- * While isoc transfers might have a buffer that
- * crosses a 64k boundary it is unlikely.
- * Since we can't add NOPs without generating
- * gaps in the traffic just hope it never
- * happens at the end of the ring.
- * This could be fixed by writing a LINK TRB
- * instead of the first NOP - however the
- * TRB_TYPE_LINK_LE32() calls would all need
- * changing to check the ring length.
- */
- break;
-
- if (num_trbs >= TRBS_PER_SEGMENT) {
- xhci_err(xhci, "Too many fragments %d, max %d\n",
- num_trbs, TRBS_PER_SEGMENT - 1);
- return -EINVAL;
- }
-
- nop_cmd = cpu_to_le32(TRB_TYPE(TRB_TR_NOOP) |
- ep_ring->cycle_state);
- ep_ring->num_trbs_free -= usable;
- do {
- trb->generic.field[0] = 0;
- trb->generic.field[1] = 0;
- trb->generic.field[2] = 0;
- trb->generic.field[3] = nop_cmd;
- trb++;
- } while (--usable);
- ep_ring->enqueue = trb;
- if (room_on_ring(xhci, ep_ring, num_trbs))
- break;
- }
+ if (room_on_ring(xhci, ep_ring, num_trbs))
+ break;
if (ep_ring == xhci->cmd_ring) {
xhci_err(xhci, "Do not support expand command ring\n");
xhci_dbg(xhci, "Event ring:\n");
xhci_debug_ring(xhci, xhci->event_ring);
xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
- temp_64 = readq(&xhci->ir_set->erst_dequeue);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
temp_64 &= ~ERST_PTR_MASK;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"ERST deq = 64'h%0lx", (long unsigned int) temp_64);
{
xhci->s3.command = readl(&xhci->op_regs->command);
xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification);
- xhci->s3.dcbaa_ptr = readq(&xhci->op_regs->dcbaa_ptr);
+ xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci->s3.config_reg = readl(&xhci->op_regs->config_reg);
xhci->s3.erst_size = readl(&xhci->ir_set->erst_size);
- xhci->s3.erst_base = readq(&xhci->ir_set->erst_base);
- xhci->s3.erst_dequeue = readq(&xhci->ir_set->erst_dequeue);
+ xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+ xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending);
xhci->s3.irq_control = readl(&xhci->ir_set->irq_control);
}
{
writel(xhci->s3.command, &xhci->op_regs->command);
writel(xhci->s3.dev_nt, &xhci->op_regs->dev_notification);
- writeq(xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
+ xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr);
writel(xhci->s3.config_reg, &xhci->op_regs->config_reg);
writel(xhci->s3.erst_size, &xhci->ir_set->erst_size);
- writeq(xhci->s3.erst_base, &xhci->ir_set->erst_base);
- writeq(xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue);
writel(xhci->s3.irq_pending, &xhci->ir_set->irq_pending);
writel(xhci->s3.irq_control, &xhci->ir_set->irq_control);
}
u64 val_64;
/* step 2: initialize command ring buffer */
- val_64 = readq(&xhci->op_regs->cmd_ring);
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
(xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
xhci->cmd_ring->dequeue) &
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"// Setting command ring address to 0x%llx",
(long unsigned long) val_64);
- writeq(val_64, &xhci->op_regs->cmd_ring);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
}
/*
if (ret) {
return ret;
}
- temp_64 = readq(&xhci->op_regs->dcbaa_ptr);
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
"Op regs DCBAA ptr = %#016llx", temp_64);
xhci_dbg_trace(xhci, trace_xhci_dbg_address,
struct device *dev = hcd->self.controller;
int retval;
- /* Limit the block layer scatter-gather lists to half a segment. */
- hcd->self.sg_tablesize = TRBS_PER_SEGMENT / 2;
-
- /* support to build packet from discontinuous buffers */
- hcd->self.no_sg_constraint = 1;
+ /* Accept arbitrarily long scatter-gather lists */
+ hcd->self.sg_tablesize = ~0;
/* XHCI controllers don't stop the ep queue on short packets :| */
hcd->self.no_stop_on_short = 1;
/* xHCI private pointer was set in xhci_pci_probe for the second
* registered roothub.
*/
+ xhci = hcd_to_xhci(hcd);
+ /*
+ * Support arbitrarily aligned sg-list entries on hosts without
+ * TD fragment rules (which are currently unsupported).
+ */
+ if (xhci->hci_version < 0x100)
+ hcd->self.no_sg_constraint = 1;
+
return 0;
}
if (xhci->hci_version > 0x96)
xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+ if (xhci->hci_version < 0x100)
+ hcd->self.no_sg_constraint = 1;
+
/* Make sure the HC is halted. */
retval = xhci_halt(xhci);
if (retval)
#include <linux/kernel.h>
#include <linux/usb/hcd.h>
-/*
- * Registers should always be accessed with double word or quad word accesses.
- *
- * Some xHCI implementations may support 64-bit address pointers. Registers
- * with 64-bit address pointers should be written to with dword accesses by
- * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
- * xHCI implementations that do not support 64-bit address pointers will ignore
- * the high dword, and write order is irrelevant.
- */
-#include <asm-generic/io-64-nonatomic-lo-hi.h>
-
/* Code sharing between pci-quirks and xhci hcd */
#include "xhci-ext-caps.h"
#include "pci-quirks.h"
* since the command ring is 64-byte aligned.
* It must also be greater than 16.
*/
-#define TRBS_PER_SEGMENT 256
+#define TRBS_PER_SEGMENT 64
/* Allow two commands + a link TRB, along with any reserved command TRBs */
#define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3)
#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
#define xhci_warn_ratelimited(xhci, fmt, args...) \
dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers. Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
+ __le64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u64 val_lo = readl(ptr);
+ u64 val_hi = readl(ptr + 1);
+ return val_lo + (val_hi << 32);
+}
+static inline void xhci_write_64(struct xhci_hcd *xhci,
+ const u64 val, __le64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u32 val_lo = lower_32_bits(val);
+ u32 val_hi = upper_32_bits(val);
+
+ writel(val_lo, ptr);
+ writel(val_hi, ptr + 1);
+}
+
static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
{
return xhci->quirks & XHCI_LINK_TRB_QUIRK;
phy = __usb_find_phy(&phy_list, type);
if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
- pr_err("unable to find transceiver of type %s\n",
+ pr_debug("PHY: unable to find transceiver of type %s\n",
usb_phy_type_string(type));
goto err0;
}
phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
- pr_err("unable to find transceiver\n");
+ dev_dbg(dev, "unable to find transceiver\n");
goto err0;
}
unsigned long flags;
phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL);
- if (!phy_bind) {
- pr_err("phy_bind(): No memory for phy_bind");
+ if (!phy_bind)
return -ENOMEM;
- }
phy_bind->dev_name = dev_name;
phy_bind->phy_dev_name = phy_dev_name;
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) },
{ USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SPROG_II) },
+ { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_LP101_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_P200X_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) },
#define TI_XDS100V2_PID 0xa6d0
#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
+#define FTDI_EV3CON_PID 0xABB9 /* Mindstorms EV3 Console Adapter */
/* US Interface Navigator (http://www.usinterface.com/) */
#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */
/* Sprog II (Andrew Crosland's SprogII DCC interface) */
#define FTDI_SPROG_II 0xF0C8
+/*
+ * Two of the Tagsys RFID Readers
+ */
+#define FTDI_TAGSYS_LP101_PID 0xF0E9 /* Tagsys L-P101 RFID*/
+#define FTDI_TAGSYS_P200X_PID 0xF0EE /* Tagsys Medio P200x RFID*/
+
/* an infrared receiver for user access control with IR tags */
#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1267, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) },
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)}, /* Sierra Wireless EM7700 Device Management */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)}, /* Sierra Wireless EM7700 NMEA */
{USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)}, /* Sierra Wireless EM7700 Modem */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)}, /* Netgear AirCard 340U Device Management */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)}, /* Netgear AirCard 340U NMEA */
+ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)}, /* Netgear AirCard 340U Modem */
{ } /* Terminating entry */
};
/* Suunto ANT+ USB Driver */
#define SUUNTO_IDS() \
- { USB_DEVICE(0x0fcf, 0x1008) }
+ { USB_DEVICE(0x0fcf, 0x1008) }, \
+ { USB_DEVICE(0x0fcf, 0x1009) } /* Dynastream ANT USB-m Stick */
DEVICE(suunto, SUUNTO_IDS);
/* Siemens USB/MPI adapter */
This option depends on 'SCSI' support being enabled, but you
probably also need 'SCSI device support: SCSI disk support'
- (BLK_DEV_SD) for most USB storage devices.
+ (BLK_DEV_SD) for most USB storage devices. Some devices also
+ will require 'Probe all LUNs on each SCSI device'
+ (SCSI_MULTI_LUN).
To compile this driver as a module, choose M here: the
module will be called usb-storage.
static int slave_alloc (struct scsi_device *sdev)
{
+ struct us_data *us = host_to_us(sdev->host);
+
/*
* Set the INQUIRY transfer length to 36. We don't use any of
* the extra data and many devices choke if asked for more or
*/
blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1));
+ /* Tell the SCSI layer if we know there is more than one LUN */
+ if (us->protocol == USB_PR_BULK && us->max_lun > 0)
+ sdev->sdev_bflags |= BLIST_FORCELUN;
+
return 0;
}
"Cypress ISD-300LP",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
-UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x0219,
+UNUSUAL_DEV( 0x14cd, 0x6116, 0x0160, 0x0160,
"Super Top",
"USB 2.0 SATA BRIDGE",
USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> */
+UNUSUAL_DEV( 0x0fca, 0x8004, 0x0201, 0x0201,
+ "Research In Motion",
+ "BlackBerry Bold 9000",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/* Reported by Michael Stattmann <michael@stattmann.com> */
UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000,
"Sony Ericsson",
config FB_IMX
tristate "Freescale i.MX1/21/25/27 LCD support"
- depends on FB && IMX_HAVE_PLATFORM_IMX_FB
+ depends on FB && ARCH_MXC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config EXYNOS_LCD_S6E8AX0
bool "S6E8AX0 MIPI AMOLED LCD Driver"
- depends on (EXYNOS_MIPI_DSI && BACKLIGHT_CLASS_DEVICE && LCD_CLASS_DEVICE)
+ depends on EXYNOS_MIPI_DSI && BACKLIGHT_CLASS_DEVICE
+ depends on (LCD_CLASS_DEVICE = y)
default n
help
If you have an S6E8AX0 MIPI AMOLED LCD Panel, say Y to enable its
*five_taps = false;
do {
- in_height = DIV_ROUND_UP(height, *decim_y);
- in_width = DIV_ROUND_UP(width, *decim_x);
+ in_height = height / *decim_y;
+ in_width = width / *decim_x;
*core_clk = dispc.feat->calc_core_clk(pclk, in_width,
in_height, out_width, out_height, mem_to_mem);
error = (in_width > maxsinglelinewidth || !*core_clk ||
dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
do {
- in_height = DIV_ROUND_UP(height, *decim_y);
- in_width = DIV_ROUND_UP(width, *decim_x);
+ in_height = height / *decim_y;
+ in_width = width / *decim_x;
*five_taps = in_height > out_height;
if (in_width > maxsinglelinewidth)
{
u16 in_width, in_width_max;
int decim_x_min = *decim_x;
- u16 in_height = DIV_ROUND_UP(height, *decim_y);
+ u16 in_height = height / *decim_y;
const int maxsinglelinewidth =
dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
const int maxdownscale = dss_feat_get_param_max(FEAT_PARAM_DOWNSCALE);
return -EINVAL;
do {
- in_width = DIV_ROUND_UP(width, *decim_x);
+ in_width = width / *decim_x;
} while (*decim_x <= *x_predecim &&
in_width > maxsinglelinewidth && ++*decim_x);
if (r)
return r;
- in_width = DIV_ROUND_UP(in_width, x_predecim);
- in_height = DIV_ROUND_UP(in_height, y_predecim);
+ in_width = in_width / x_predecim;
+ in_height = in_height / y_predecim;
if (color_mode == OMAP_DSS_COLOR_YUV2 ||
color_mode == OMAP_DSS_COLOR_UYVY ||
/* outputs */
struct dsi_clock_info dsi_cinfo;
- unsigned long long fck;
+ unsigned long fck;
struct dispc_clock_info dispc_cinfo;
};
struct sdi_clk_calc_ctx {
unsigned long pck_min, pck_max;
- unsigned long long fck;
+ unsigned long fck;
struct dispc_clock_info dispc_cinfo;
};
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
*(u8 *)(buf + done) = ioread8(addr + done);
done += 1;
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
iowrite8(*(u8 *)(buf + done), addr + done);
done += 1;
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
*(u8 *)(buf + done) = ioread8(addr + done);
done += 1;
if (done == count)
goto out;
}
- if ((uintptr_t)addr & 0x2) {
+ if ((uintptr_t)(addr + done) & 0x2) {
if ((count - done) < 2) {
iowrite8(*(u8 *)(buf + done), addr + done);
done += 1;
config DW_WATCHDOG
tristate "Synopsys DesignWare watchdog"
+ depends on HAS_IOMEM
help
Say Y here if to include support for the Synopsys DesignWare
watchdog timer found in many chips.
config ORION_WATCHDOG
tristate "Orion watchdog"
- depends on ARCH_ORION5X || ARCH_KIRKWOOD || ARCH_DOVE
+ depends on ARCH_ORION5X || ARCH_KIRKWOOD || ARCH_DOVE || ARCH_MVEBU
select WATCHDOG_CORE
help
Say Y here if to include support for the watchdog timer
#include <linux/platform_device.h>
#include <linux/watchdog.h>
#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
-#include <linux/spinlock.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/of.h>
-#include <mach/bridge-regs.h>
+#include <linux/of_device.h>
+
+/* RSTOUT mask register physical address for Orion5x, Kirkwood and Dove */
+#define ORION_RSTOUT_MASK_OFFSET 0x20108
+
+/* Internal registers can be configured at any 1 MiB aligned address */
+#define INTERNAL_REGS_MASK ~(SZ_1M - 1)
/*
* Watchdog timer block registers.
*/
#define TIMER_CTRL 0x0000
-#define WDT_EN 0x0010
-#define WDT_VAL 0x0024
+#define TIMER_A370_STATUS 0x04
#define WDT_MAX_CYCLE_COUNT 0xffffffff
-#define WDT_IN_USE 0
-#define WDT_OK_TO_CLOSE 1
-#define WDT_RESET_OUT_EN BIT(1)
-#define WDT_INT_REQ BIT(3)
+#define WDT_A370_RATIO_MASK(v) ((v) << 16)
+#define WDT_A370_RATIO_SHIFT 5
+#define WDT_A370_RATIO (1 << WDT_A370_RATIO_SHIFT)
+
+#define WDT_AXP_FIXED_ENABLE_BIT BIT(10)
+#define WDT_A370_EXPIRED BIT(31)
static bool nowayout = WATCHDOG_NOWAYOUT;
static int heartbeat = -1; /* module parameter (seconds) */
-static unsigned int wdt_max_duration; /* (seconds) */
-static struct clk *clk;
-static unsigned int wdt_tclk;
-static void __iomem *wdt_reg;
-static DEFINE_SPINLOCK(wdt_lock);
-static int orion_wdt_ping(struct watchdog_device *wdt_dev)
+struct orion_watchdog;
+
+struct orion_watchdog_data {
+ int wdt_counter_offset;
+ int wdt_enable_bit;
+ int rstout_enable_bit;
+ int (*clock_init)(struct platform_device *,
+ struct orion_watchdog *);
+ int (*start)(struct watchdog_device *);
+};
+
+struct orion_watchdog {
+ struct watchdog_device wdt;
+ void __iomem *reg;
+ void __iomem *rstout;
+ unsigned long clk_rate;
+ struct clk *clk;
+ const struct orion_watchdog_data *data;
+};
+
+static int orion_wdt_clock_init(struct platform_device *pdev,
+ struct orion_watchdog *dev)
{
- spin_lock(&wdt_lock);
+ int ret;
- /* Reload watchdog duration */
- writel(wdt_tclk * wdt_dev->timeout, wdt_reg + WDT_VAL);
+ dev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+ ret = clk_prepare_enable(dev->clk);
+ if (ret) {
+ clk_put(dev->clk);
+ return ret;
+ }
- spin_unlock(&wdt_lock);
+ dev->clk_rate = clk_get_rate(dev->clk);
return 0;
}
-static int orion_wdt_start(struct watchdog_device *wdt_dev)
+static int armada370_wdt_clock_init(struct platform_device *pdev,
+ struct orion_watchdog *dev)
{
- u32 reg;
+ int ret;
- spin_lock(&wdt_lock);
+ dev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+ ret = clk_prepare_enable(dev->clk);
+ if (ret) {
+ clk_put(dev->clk);
+ return ret;
+ }
+
+ /* Setup watchdog input clock */
+ atomic_io_modify(dev->reg + TIMER_CTRL,
+ WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT),
+ WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT));
+
+ dev->clk_rate = clk_get_rate(dev->clk) / WDT_A370_RATIO;
+ return 0;
+}
+
+static int armadaxp_wdt_clock_init(struct platform_device *pdev,
+ struct orion_watchdog *dev)
+{
+ int ret;
+
+ dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+ ret = clk_prepare_enable(dev->clk);
+ if (ret) {
+ clk_put(dev->clk);
+ return ret;
+ }
+
+ /* Enable the fixed watchdog clock input */
+ atomic_io_modify(dev->reg + TIMER_CTRL,
+ WDT_AXP_FIXED_ENABLE_BIT,
+ WDT_AXP_FIXED_ENABLE_BIT);
+
+ dev->clk_rate = clk_get_rate(dev->clk);
+ return 0;
+}
+
+static int orion_wdt_ping(struct watchdog_device *wdt_dev)
+{
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+ /* Reload watchdog duration */
+ writel(dev->clk_rate * wdt_dev->timeout,
+ dev->reg + dev->data->wdt_counter_offset);
+ return 0;
+}
+
+static int armada370_start(struct watchdog_device *wdt_dev)
+{
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
/* Set watchdog duration */
- writel(wdt_tclk * wdt_dev->timeout, wdt_reg + WDT_VAL);
+ writel(dev->clk_rate * wdt_dev->timeout,
+ dev->reg + dev->data->wdt_counter_offset);
- /* Clear watchdog timer interrupt */
- writel(~WDT_INT_REQ, BRIDGE_CAUSE);
+ /* Clear the watchdog expiration bit */
+ atomic_io_modify(dev->reg + TIMER_A370_STATUS, WDT_A370_EXPIRED, 0);
/* Enable watchdog timer */
- reg = readl(wdt_reg + TIMER_CTRL);
- reg |= WDT_EN;
- writel(reg, wdt_reg + TIMER_CTRL);
+ atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit,
+ dev->data->wdt_enable_bit);
+
+ atomic_io_modify(dev->rstout, dev->data->rstout_enable_bit,
+ dev->data->rstout_enable_bit);
+ return 0;
+}
+
+static int orion_start(struct watchdog_device *wdt_dev)
+{
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+
+ /* Set watchdog duration */
+ writel(dev->clk_rate * wdt_dev->timeout,
+ dev->reg + dev->data->wdt_counter_offset);
+
+ /* Enable watchdog timer */
+ atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit,
+ dev->data->wdt_enable_bit);
/* Enable reset on watchdog */
- reg = readl(RSTOUTn_MASK);
- reg |= WDT_RESET_OUT_EN;
- writel(reg, RSTOUTn_MASK);
+ atomic_io_modify(dev->rstout, dev->data->rstout_enable_bit,
+ dev->data->rstout_enable_bit);
- spin_unlock(&wdt_lock);
return 0;
}
-static int orion_wdt_stop(struct watchdog_device *wdt_dev)
+static int orion_wdt_start(struct watchdog_device *wdt_dev)
{
- u32 reg;
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
- spin_lock(&wdt_lock);
+ /* There are some per-SoC quirks to handle */
+ return dev->data->start(wdt_dev);
+}
+
+static int orion_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
/* Disable reset on watchdog */
- reg = readl(RSTOUTn_MASK);
- reg &= ~WDT_RESET_OUT_EN;
- writel(reg, RSTOUTn_MASK);
+ atomic_io_modify(dev->rstout, dev->data->rstout_enable_bit, 0);
/* Disable watchdog timer */
- reg = readl(wdt_reg + TIMER_CTRL);
- reg &= ~WDT_EN;
- writel(reg, wdt_reg + TIMER_CTRL);
+ atomic_io_modify(dev->reg + TIMER_CTRL, dev->data->wdt_enable_bit, 0);
- spin_unlock(&wdt_lock);
return 0;
}
-static unsigned int orion_wdt_get_timeleft(struct watchdog_device *wdt_dev)
+static int orion_wdt_enabled(struct orion_watchdog *dev)
{
- unsigned int time_left;
+ bool enabled, running;
+
+ enabled = readl(dev->rstout) & dev->data->rstout_enable_bit;
+ running = readl(dev->reg + TIMER_CTRL) & dev->data->wdt_enable_bit;
- spin_lock(&wdt_lock);
- time_left = readl(wdt_reg + WDT_VAL) / wdt_tclk;
- spin_unlock(&wdt_lock);
+ return enabled && running;
+}
- return time_left;
+static unsigned int orion_wdt_get_timeleft(struct watchdog_device *wdt_dev)
+{
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+ return readl(dev->reg + dev->data->wdt_counter_offset) / dev->clk_rate;
}
static int orion_wdt_set_timeout(struct watchdog_device *wdt_dev,
.get_timeleft = orion_wdt_get_timeleft,
};
-static struct watchdog_device orion_wdt = {
- .info = &orion_wdt_info,
- .ops = &orion_wdt_ops,
- .min_timeout = 1,
+static irqreturn_t orion_wdt_irq(int irq, void *devid)
+{
+ panic("Watchdog Timeout");
+ return IRQ_HANDLED;
+}
+
+/*
+ * The original devicetree binding for this driver specified only
+ * one memory resource, so in order to keep DT backwards compatibility
+ * we try to fallback to a hardcoded register address, if the resource
+ * is missing from the devicetree.
+ */
+static void __iomem *orion_wdt_ioremap_rstout(struct platform_device *pdev,
+ phys_addr_t internal_regs)
+{
+ struct resource *res;
+ phys_addr_t rstout;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res)
+ return devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+
+ /* This workaround works only for "orion-wdt", DT-enabled */
+ if (!of_device_is_compatible(pdev->dev.of_node, "marvell,orion-wdt"))
+ return NULL;
+
+ rstout = internal_regs + ORION_RSTOUT_MASK_OFFSET;
+
+ WARN(1, FW_BUG "falling back to harcoded RSTOUT reg %pa\n", &rstout);
+ return devm_ioremap(&pdev->dev, rstout, 0x4);
+}
+
+static const struct orion_watchdog_data orion_data = {
+ .rstout_enable_bit = BIT(1),
+ .wdt_enable_bit = BIT(4),
+ .wdt_counter_offset = 0x24,
+ .clock_init = orion_wdt_clock_init,
+ .start = orion_start,
+};
+
+static const struct orion_watchdog_data armada370_data = {
+ .rstout_enable_bit = BIT(8),
+ .wdt_enable_bit = BIT(8),
+ .wdt_counter_offset = 0x34,
+ .clock_init = armada370_wdt_clock_init,
+ .start = armada370_start,
};
+static const struct orion_watchdog_data armadaxp_data = {
+ .rstout_enable_bit = BIT(8),
+ .wdt_enable_bit = BIT(8),
+ .wdt_counter_offset = 0x34,
+ .clock_init = armadaxp_wdt_clock_init,
+ .start = armada370_start,
+};
+
+static const struct of_device_id orion_wdt_of_match_table[] = {
+ {
+ .compatible = "marvell,orion-wdt",
+ .data = &orion_data,
+ },
+ {
+ .compatible = "marvell,armada-370-wdt",
+ .data = &armada370_data,
+ },
+ {
+ .compatible = "marvell,armada-xp-wdt",
+ .data = &armadaxp_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, orion_wdt_of_match_table);
+
static int orion_wdt_probe(struct platform_device *pdev)
{
+ struct orion_watchdog *dev;
+ const struct of_device_id *match;
+ unsigned int wdt_max_duration; /* (seconds) */
struct resource *res;
- int ret;
+ int ret, irq;
- clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "Orion Watchdog missing clock\n");
- return -ENODEV;
- }
- clk_prepare_enable(clk);
- wdt_tclk = clk_get_rate(clk);
+ dev = devm_kzalloc(&pdev->dev, sizeof(struct orion_watchdog),
+ GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ match = of_match_device(orion_wdt_of_match_table, &pdev->dev);
+ if (!match)
+ /* Default legacy match */
+ match = &orion_wdt_of_match_table[0];
+
+ dev->wdt.info = &orion_wdt_info;
+ dev->wdt.ops = &orion_wdt_ops;
+ dev->wdt.min_timeout = 1;
+ dev->data = match->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
- wdt_reg = devm_ioremap(&pdev->dev, res->start, resource_size(res));
- if (!wdt_reg)
- return -ENOMEM;
- wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
+ dev->reg = devm_ioremap(&pdev->dev, res->start,
+ resource_size(res));
+ if (!dev->reg)
+ return -ENOMEM;
- orion_wdt.timeout = wdt_max_duration;
- orion_wdt.max_timeout = wdt_max_duration;
- watchdog_init_timeout(&orion_wdt, heartbeat, &pdev->dev);
+ dev->rstout = orion_wdt_ioremap_rstout(pdev, res->start &
+ INTERNAL_REGS_MASK);
+ if (!dev->rstout)
+ return -ENODEV;
- watchdog_set_nowayout(&orion_wdt, nowayout);
- ret = watchdog_register_device(&orion_wdt);
+ ret = dev->data->clock_init(pdev, dev);
if (ret) {
- clk_disable_unprepare(clk);
+ dev_err(&pdev->dev, "cannot initialize clock\n");
return ret;
}
+ wdt_max_duration = WDT_MAX_CYCLE_COUNT / dev->clk_rate;
+
+ dev->wdt.timeout = wdt_max_duration;
+ dev->wdt.max_timeout = wdt_max_duration;
+ watchdog_init_timeout(&dev->wdt, heartbeat, &pdev->dev);
+
+ platform_set_drvdata(pdev, &dev->wdt);
+ watchdog_set_drvdata(&dev->wdt, dev);
+
+ /*
+ * Let's make sure the watchdog is fully stopped, unless it's
+ * explicitly enabled. This may be the case if the module was
+ * removed and re-insterted, or if the bootloader explicitly
+ * set a running watchdog before booting the kernel.
+ */
+ if (!orion_wdt_enabled(dev))
+ orion_wdt_stop(&dev->wdt);
+
+ /* Request the IRQ only after the watchdog is disabled */
+ irq = platform_get_irq(pdev, 0);
+ if (irq > 0) {
+ /*
+ * Not all supported platforms specify an interrupt for the
+ * watchdog, so let's make it optional.
+ */
+ ret = devm_request_irq(&pdev->dev, irq, orion_wdt_irq, 0,
+ pdev->name, dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ goto disable_clk;
+ }
+ }
+
+ watchdog_set_nowayout(&dev->wdt, nowayout);
+ ret = watchdog_register_device(&dev->wdt);
+ if (ret)
+ goto disable_clk;
+
pr_info("Initial timeout %d sec%s\n",
- orion_wdt.timeout, nowayout ? ", nowayout" : "");
+ dev->wdt.timeout, nowayout ? ", nowayout" : "");
return 0;
+
+disable_clk:
+ clk_disable_unprepare(dev->clk);
+ clk_put(dev->clk);
+ return ret;
}
static int orion_wdt_remove(struct platform_device *pdev)
{
- watchdog_unregister_device(&orion_wdt);
- clk_disable_unprepare(clk);
+ struct watchdog_device *wdt_dev = platform_get_drvdata(pdev);
+ struct orion_watchdog *dev = watchdog_get_drvdata(wdt_dev);
+
+ watchdog_unregister_device(wdt_dev);
+ clk_disable_unprepare(dev->clk);
+ clk_put(dev->clk);
return 0;
}
static void orion_wdt_shutdown(struct platform_device *pdev)
{
- orion_wdt_stop(&orion_wdt);
+ struct watchdog_device *wdt_dev = platform_get_drvdata(pdev);
+ orion_wdt_stop(wdt_dev);
}
-static const struct of_device_id orion_wdt_of_match_table[] = {
- { .compatible = "marvell,orion-wdt", },
- {},
-};
-MODULE_DEVICE_TABLE(of, orion_wdt_of_match_table);
-
static struct platform_driver orion_wdt_driver = {
.probe = orion_wdt_probe,
.remove = orion_wdt_remove,
dom0-$(CONFIG_X86) += pcpu.o
obj-$(CONFIG_XEN_DOM0) += $(dom0-y)
obj-$(CONFIG_BLOCK) += biomerge.o
-obj-$(CONFIG_XEN_XENCOMM) += xencomm.o
obj-$(CONFIG_XEN_BALLOON) += xen-balloon.o
obj-$(CONFIG_XEN_SELFBALLOONING) += xen-selfballoon.o
obj-$(CONFIG_XEN_DEV_EVTCHN) += xen-evtchn.o
irq = ret;
goto out;
}
+ /* New interdomain events are bound to VCPU 0. */
+ bind_evtchn_to_cpu(evtchn, 0);
} else {
struct irq_info *info = info_for_irq(irq);
WARN_ON(info == NULL || info->type != IRQT_EVTCHN);
}
pr_debug("map %d+%d\n", map->index, map->count);
- err = gnttab_map_refs_userspace(map->map_ops,
- use_ptemod ? map->kmap_ops : NULL,
- map->pages,
- map->count);
+ err = gnttab_map_refs(map->map_ops, use_ptemod ? map->kmap_ops : NULL,
+ map->pages, map->count);
if (err)
return err;
}
}
- err = gnttab_unmap_refs_userspace(map->unmap_ops + offset,
- use_ptemod ? map->kmap_ops + offset : NULL,
- map->pages + offset,
- pages);
+ err = gnttab_unmap_refs(map->unmap_ops + offset,
+ use_ptemod ? map->kmap_ops + offset : NULL, map->pages + offset,
+ pages);
if (err)
return err;
}
EXPORT_SYMBOL_GPL(gnttab_batch_copy);
-int __gnttab_map_refs(struct gnttab_map_grant_ref *map_ops,
+int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops,
struct gnttab_map_grant_ref *kmap_ops,
- struct page **pages, unsigned int count,
- bool m2p_override)
+ struct page **pages, unsigned int count)
{
int i, ret;
bool lazy = false;
pte_t *pte;
- unsigned long mfn, pfn;
+ unsigned long mfn;
- BUG_ON(kmap_ops && !m2p_override);
ret = HYPERVISOR_grant_table_op(GNTTABOP_map_grant_ref, map_ops, count);
if (ret)
return ret;
set_phys_to_machine(map_ops[i].host_addr >> PAGE_SHIFT,
map_ops[i].dev_bus_addr >> PAGE_SHIFT);
}
- return 0;
+ return ret;
}
- if (m2p_override &&
- !in_interrupt() &&
- paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) {
+ if (!in_interrupt() && paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) {
arch_enter_lazy_mmu_mode();
lazy = true;
}
} else {
mfn = PFN_DOWN(map_ops[i].dev_bus_addr);
}
- pfn = page_to_pfn(pages[i]);
-
- WARN_ON(PagePrivate(pages[i]));
- SetPagePrivate(pages[i]);
- set_page_private(pages[i], mfn);
-
- pages[i]->index = pfn_to_mfn(pfn);
- if (unlikely(!set_phys_to_machine(pfn, FOREIGN_FRAME(mfn)))) {
- ret = -ENOMEM;
- goto out;
- }
- if (m2p_override)
- ret = m2p_add_override(mfn, pages[i], kmap_ops ?
- &kmap_ops[i] : NULL);
+ ret = m2p_add_override(mfn, pages[i], kmap_ops ?
+ &kmap_ops[i] : NULL);
if (ret)
goto out;
}
return ret;
}
-
-int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops,
- struct page **pages, unsigned int count)
-{
- return __gnttab_map_refs(map_ops, NULL, pages, count, false);
-}
EXPORT_SYMBOL_GPL(gnttab_map_refs);
-int gnttab_map_refs_userspace(struct gnttab_map_grant_ref *map_ops,
- struct gnttab_map_grant_ref *kmap_ops,
- struct page **pages, unsigned int count)
-{
- return __gnttab_map_refs(map_ops, kmap_ops, pages, count, true);
-}
-EXPORT_SYMBOL_GPL(gnttab_map_refs_userspace);
-
-int __gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops,
+int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops,
struct gnttab_map_grant_ref *kmap_ops,
- struct page **pages, unsigned int count,
- bool m2p_override)
+ struct page **pages, unsigned int count)
{
int i, ret;
bool lazy = false;
- unsigned long pfn, mfn;
- BUG_ON(kmap_ops && !m2p_override);
ret = HYPERVISOR_grant_table_op(GNTTABOP_unmap_grant_ref, unmap_ops, count);
if (ret)
return ret;
set_phys_to_machine(unmap_ops[i].host_addr >> PAGE_SHIFT,
INVALID_P2M_ENTRY);
}
- return 0;
+ return ret;
}
- if (m2p_override &&
- !in_interrupt() &&
- paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) {
+ if (!in_interrupt() && paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE) {
arch_enter_lazy_mmu_mode();
lazy = true;
}
for (i = 0; i < count; i++) {
- pfn = page_to_pfn(pages[i]);
- mfn = get_phys_to_machine(pfn);
- if (mfn == INVALID_P2M_ENTRY || !(mfn & FOREIGN_FRAME_BIT)) {
- ret = -EINVAL;
- goto out;
- }
-
- set_page_private(pages[i], INVALID_P2M_ENTRY);
- WARN_ON(!PagePrivate(pages[i]));
- ClearPagePrivate(pages[i]);
- set_phys_to_machine(pfn, pages[i]->index);
- if (m2p_override)
- ret = m2p_remove_override(pages[i],
- kmap_ops ?
- &kmap_ops[i] : NULL,
- mfn);
+ ret = m2p_remove_override(pages[i], kmap_ops ?
+ &kmap_ops[i] : NULL);
if (ret)
goto out;
}
return ret;
}
-
-int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *map_ops,
- struct page **pages, unsigned int count)
-{
- return __gnttab_unmap_refs(map_ops, NULL, pages, count, false);
-}
EXPORT_SYMBOL_GPL(gnttab_unmap_refs);
-int gnttab_unmap_refs_userspace(struct gnttab_unmap_grant_ref *map_ops,
- struct gnttab_map_grant_ref *kmap_ops,
- struct page **pages, unsigned int count)
-{
- return __gnttab_unmap_refs(map_ops, kmap_ops, pages, count, true);
-}
-EXPORT_SYMBOL_GPL(gnttab_unmap_refs_userspace);
-
static unsigned nr_status_frames(unsigned nr_grant_frames)
{
BUG_ON(grefs_per_grant_frame == 0);
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) IBM Corp. 2006
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <asm/page.h>
-#include <xen/xencomm.h>
-#include <xen/interface/xen.h>
-#include <asm/xen/xencomm.h> /* for xencomm_is_phys_contiguous() */
-
-static int xencomm_init(struct xencomm_desc *desc,
- void *buffer, unsigned long bytes)
-{
- unsigned long recorded = 0;
- int i = 0;
-
- while ((recorded < bytes) && (i < desc->nr_addrs)) {
- unsigned long vaddr = (unsigned long)buffer + recorded;
- unsigned long paddr;
- int offset;
- int chunksz;
-
- offset = vaddr % PAGE_SIZE; /* handle partial pages */
- chunksz = min(PAGE_SIZE - offset, bytes - recorded);
-
- paddr = xencomm_vtop(vaddr);
- if (paddr == ~0UL) {
- printk(KERN_DEBUG "%s: couldn't translate vaddr %lx\n",
- __func__, vaddr);
- return -EINVAL;
- }
-
- desc->address[i++] = paddr;
- recorded += chunksz;
- }
-
- if (recorded < bytes) {
- printk(KERN_DEBUG
- "%s: could only translate %ld of %ld bytes\n",
- __func__, recorded, bytes);
- return -ENOSPC;
- }
-
- /* mark remaining addresses invalid (just for safety) */
- while (i < desc->nr_addrs)
- desc->address[i++] = XENCOMM_INVALID;
-
- desc->magic = XENCOMM_MAGIC;
-
- return 0;
-}
-
-static struct xencomm_desc *xencomm_alloc(gfp_t gfp_mask,
- void *buffer, unsigned long bytes)
-{
- struct xencomm_desc *desc;
- unsigned long buffer_ulong = (unsigned long)buffer;
- unsigned long start = buffer_ulong & PAGE_MASK;
- unsigned long end = (buffer_ulong + bytes) | ~PAGE_MASK;
- unsigned long nr_addrs = (end - start + 1) >> PAGE_SHIFT;
- unsigned long size = sizeof(*desc) +
- sizeof(desc->address[0]) * nr_addrs;
-
- /*
- * slab allocator returns at least sizeof(void*) aligned pointer.
- * When sizeof(*desc) > sizeof(void*), struct xencomm_desc might
- * cross page boundary.
- */
- if (sizeof(*desc) > sizeof(void *)) {
- unsigned long order = get_order(size);
- desc = (struct xencomm_desc *)__get_free_pages(gfp_mask,
- order);
- if (desc == NULL)
- return NULL;
-
- desc->nr_addrs =
- ((PAGE_SIZE << order) - sizeof(struct xencomm_desc)) /
- sizeof(*desc->address);
- } else {
- desc = kmalloc(size, gfp_mask);
- if (desc == NULL)
- return NULL;
-
- desc->nr_addrs = nr_addrs;
- }
- return desc;
-}
-
-void xencomm_free(struct xencomm_handle *desc)
-{
- if (desc && !((ulong)desc & XENCOMM_INLINE_FLAG)) {
- struct xencomm_desc *desc__ = (struct xencomm_desc *)desc;
- if (sizeof(*desc__) > sizeof(void *)) {
- unsigned long size = sizeof(*desc__) +
- sizeof(desc__->address[0]) * desc__->nr_addrs;
- unsigned long order = get_order(size);
- free_pages((unsigned long)__va(desc), order);
- } else
- kfree(__va(desc));
- }
-}
-
-static int xencomm_create(void *buffer, unsigned long bytes,
- struct xencomm_desc **ret, gfp_t gfp_mask)
-{
- struct xencomm_desc *desc;
- int rc;
-
- pr_debug("%s: %p[%ld]\n", __func__, buffer, bytes);
-
- if (bytes == 0) {
- /* don't create a descriptor; Xen recognizes NULL. */
- BUG_ON(buffer != NULL);
- *ret = NULL;
- return 0;
- }
-
- BUG_ON(buffer == NULL); /* 'bytes' is non-zero */
-
- desc = xencomm_alloc(gfp_mask, buffer, bytes);
- if (!desc) {
- printk(KERN_DEBUG "%s failure\n", "xencomm_alloc");
- return -ENOMEM;
- }
-
- rc = xencomm_init(desc, buffer, bytes);
- if (rc) {
- printk(KERN_DEBUG "%s failure: %d\n", "xencomm_init", rc);
- xencomm_free((struct xencomm_handle *)__pa(desc));
- return rc;
- }
-
- *ret = desc;
- return 0;
-}
-
-static struct xencomm_handle *xencomm_create_inline(void *ptr)
-{
- unsigned long paddr;
-
- BUG_ON(!xencomm_is_phys_contiguous((unsigned long)ptr));
-
- paddr = (unsigned long)xencomm_pa(ptr);
- BUG_ON(paddr & XENCOMM_INLINE_FLAG);
- return (struct xencomm_handle *)(paddr | XENCOMM_INLINE_FLAG);
-}
-
-/* "mini" routine, for stack-based communications: */
-static int xencomm_create_mini(void *buffer,
- unsigned long bytes, struct xencomm_mini *xc_desc,
- struct xencomm_desc **ret)
-{
- int rc = 0;
- struct xencomm_desc *desc;
- BUG_ON(((unsigned long)xc_desc) % sizeof(*xc_desc) != 0);
-
- desc = (void *)xc_desc;
-
- desc->nr_addrs = XENCOMM_MINI_ADDRS;
-
- rc = xencomm_init(desc, buffer, bytes);
- if (!rc)
- *ret = desc;
-
- return rc;
-}
-
-struct xencomm_handle *xencomm_map(void *ptr, unsigned long bytes)
-{
- int rc;
- struct xencomm_desc *desc;
-
- if (xencomm_is_phys_contiguous((unsigned long)ptr))
- return xencomm_create_inline(ptr);
-
- rc = xencomm_create(ptr, bytes, &desc, GFP_KERNEL);
-
- if (rc || desc == NULL)
- return NULL;
-
- return xencomm_pa(desc);
-}
-
-struct xencomm_handle *__xencomm_map_no_alloc(void *ptr, unsigned long bytes,
- struct xencomm_mini *xc_desc)
-{
- int rc;
- struct xencomm_desc *desc = NULL;
-
- if (xencomm_is_phys_contiguous((unsigned long)ptr))
- return xencomm_create_inline(ptr);
-
- rc = xencomm_create_mini(ptr, bytes, xc_desc,
- &desc);
-
- if (rc)
- return NULL;
-
- return xencomm_pa(desc);
-}
}
EXPORT_SYMBOL(bio_integrity_free);
+static inline unsigned int bip_integrity_vecs(struct bio_integrity_payload *bip)
+{
+ if (bip->bip_slab == BIO_POOL_NONE)
+ return BIP_INLINE_VECS;
+
+ return bvec_nr_vecs(bip->bip_slab);
+}
+
/**
* bio_integrity_add_page - Attach integrity metadata
* @bio: bio to update
struct bio_integrity_payload *bip = bio->bi_integrity;
struct bio_vec *iv;
- if (bip->bip_vcnt >= bvec_nr_vecs(bip->bip_slab)) {
+ if (bip->bip_vcnt >= bip_integrity_vecs(bip)) {
printk(KERN_ERR "%s: bip_vec full\n", __func__);
return 0;
}
}
EXPORT_SYMBOL(bio_integrity_tag_size);
-int bio_integrity_tag(struct bio *bio, void *tag_buf, unsigned int len, int set)
+static int bio_integrity_tag(struct bio *bio, void *tag_buf, unsigned int len,
+ int set)
{
struct bio_integrity_payload *bip = bio->bi_integrity;
struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
struct bio *bio_clone_bioset(struct bio *bio_src, gfp_t gfp_mask,
struct bio_set *bs)
{
- unsigned nr_iovecs = 0;
struct bvec_iter iter;
struct bio_vec bv;
struct bio *bio;
* __bio_clone_fast() anyways.
*/
- bio_for_each_segment(bv, bio_src, iter)
- nr_iovecs++;
-
- bio = bio_alloc_bioset(gfp_mask, nr_iovecs, bs);
+ bio = bio_alloc_bioset(gfp_mask, bio_segments(bio_src), bs);
if (!bio)
return NULL;
bio->bi_iter.bi_sector = bio_src->bi_iter.bi_sector;
bio->bi_iter.bi_size = bio_src->bi_iter.bi_size;
+ if (bio->bi_rw & REQ_DISCARD)
+ goto integrity_clone;
+
+ if (bio->bi_rw & REQ_WRITE_SAME) {
+ bio->bi_io_vec[bio->bi_vcnt++] = bio_src->bi_io_vec[0];
+ goto integrity_clone;
+ }
+
bio_for_each_segment(bv, bio_src, iter)
bio->bi_io_vec[bio->bi_vcnt++] = bv;
+integrity_clone:
if (bio_integrity(bio_src)) {
int ret;
#include <linux/slab.h>
#include <linux/buffer_head.h>
#include <linux/mutex.h>
-#include <linux/crc32c.h>
#include <linux/genhd.h>
#include <linux/blkdev.h>
#include "ctree.h"
#include "disk-io.h"
+#include "hash.h"
#include "transaction.h"
#include "extent_io.h"
#include "volumes.h"
size_t sublen = i ? PAGE_CACHE_SIZE :
(PAGE_CACHE_SIZE - BTRFS_CSUM_SIZE);
- crc = crc32c(crc, data, sublen);
+ crc = btrfs_crc32c(crc, data, sublen);
}
btrfs_csum_final(crc, csum);
if (memcmp(csum, h->csum, state->csum_size))
bytes = min(bytes, working_bytes);
kaddr = kmap_atomic(page_out);
memcpy(kaddr + *pg_offset, buf + buf_offset, bytes);
+ if (*pg_index == (vcnt - 1) && *pg_offset == 0)
+ memset(kaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
kunmap_atomic(kaddr);
flush_dcache_page(page_out);
#include <linux/workqueue.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
-#include <linux/crc32c.h>
#include <linux/slab.h>
#include <linux/migrate.h>
#include <linux/ratelimit.h>
#include <asm/unaligned.h>
#include "ctree.h"
#include "disk-io.h"
+#include "hash.h"
#include "transaction.h"
#include "btrfs_inode.h"
#include "volumes.h"
u32 btrfs_csum_data(char *data, u32 seed, size_t len)
{
- return crc32c(seed, data, len);
+ return btrfs_crc32c(seed, data, len);
}
void btrfs_csum_final(u32 crc, char *result)
rb_erase(&ref->rb_node, &head->ref_root);
atomic_dec(&delayed_refs->num_entries);
btrfs_put_delayed_ref(ref);
- cond_resched_lock(&head->lock);
}
if (head->must_insert_reserved)
pin_bytes = true;
spin_unlock(&delayed_refs->lock);
locked_ref = NULL;
cond_resched();
+ count++;
continue;
}
EXTENT_DEFRAG, 1, cached_state);
if (ret) {
u64 last_snapshot = btrfs_root_last_snapshot(&root->root_item);
- if (last_snapshot >= BTRFS_I(inode)->generation)
+ if (0 && last_snapshot >= BTRFS_I(inode)->generation)
/* the inode is shared */
new = record_old_file_extents(inode, ordered_extent);
return ERR_CAST(inode);
}
- return d_splice_alias(inode, dentry);
+ return d_materialise_unique(dentry, inode);
}
unsigned char btrfs_filetype_table[] = {
return ret;
}
-static long btrfs_ioctl_global_rsv(struct btrfs_root *root, void __user *arg)
-{
- struct btrfs_block_rsv *block_rsv = &root->fs_info->global_block_rsv;
- u64 reserved;
-
- spin_lock(&block_rsv->lock);
- reserved = block_rsv->reserved;
- spin_unlock(&block_rsv->lock);
-
- if (arg && copy_to_user(arg, &reserved, sizeof(reserved)))
- return -EFAULT;
- return 0;
-}
-
/*
* there are many ways the trans_start and trans_end ioctls can lead
* to deadlocks. They should only be used by applications that
spin_lock(&root->fs_info->super_lock);
strcpy(super_block->label, label);
spin_unlock(&root->fs_info->super_lock);
- ret = btrfs_end_transaction(trans, root);
+ ret = btrfs_commit_transaction(trans, root);
out_unlock:
mnt_drop_write_file(file);
if (ret)
return ret;
- trans = btrfs_start_transaction(root, 1);
+ trans = btrfs_start_transaction(root, 0);
if (IS_ERR(trans))
return PTR_ERR(trans);
btrfs_set_super_incompat_flags(super_block, newflags);
spin_unlock(&root->fs_info->super_lock);
- return btrfs_end_transaction(trans, root);
+ return btrfs_commit_transaction(trans, root);
}
long btrfs_ioctl(struct file *file, unsigned int
return btrfs_ioctl_logical_to_ino(root, argp);
case BTRFS_IOC_SPACE_INFO:
return btrfs_ioctl_space_info(root, argp);
- case BTRFS_IOC_GLOBAL_RSV:
- return btrfs_ioctl_global_rsv(root, argp);
case BTRFS_IOC_SYNC: {
int ret;
#include <linux/xattr.h>
#include <linux/posix_acl_xattr.h>
#include <linux/radix-tree.h>
-#include <linux/crc32c.h>
#include <linux/vmalloc.h>
#include <linux/string.h>
#include "send.h"
#include "backref.h"
+#include "hash.h"
#include "locking.h"
#include "disk-io.h"
#include "btrfs_inode.h"
hdr->len = cpu_to_le32(sctx->send_size - sizeof(*hdr));
hdr->crc = 0;
- crc = crc32c(0, (unsigned char *)sctx->send_buf, sctx->send_size);
+ crc = btrfs_crc32c(0, (unsigned char *)sctx->send_buf, sctx->send_size);
hdr->crc = cpu_to_le32(crc);
ret = write_buf(sctx->send_filp, sctx->send_buf, sctx->send_size,
}
if (cur_clone_root) {
+ if (compressed != BTRFS_COMPRESS_NONE) {
+ /*
+ * Offsets given by iterate_extent_inodes() are relative
+ * to the start of the extent, we need to add logical
+ * offset from the file extent item.
+ * (See why at backref.c:check_extent_in_eb())
+ */
+ cur_clone_root->offset += btrfs_file_extent_offset(eb,
+ fi);
+ }
*found = cur_clone_root;
ret = 0;
} else {
return 0;
}
-#ifdef CONFIG_BTRFS_ASSERT
-
static int del_waiting_dir_move(struct send_ctx *sctx, u64 ino)
{
struct rb_node *n = sctx->waiting_dir_moves.rb_node;
return -ENOENT;
}
-#endif
-
static int add_pending_dir_move(struct send_ctx *sctx, u64 parent_ino)
{
struct rb_node **p = &sctx->pending_dir_moves.rb_node;
}
sctx->send_progress = sctx->cur_ino + 1;
- ASSERT(del_waiting_dir_move(sctx, pm->ino) == 0);
+ ret = del_waiting_dir_move(sctx, pm->ino);
+ ASSERT(ret == 0);
+
ret = get_cur_path(sctx, pm->ino, pm->gen, to_path);
if (ret < 0)
goto out;
kfree(num);
if (info->max_inline) {
- info->max_inline = max_t(u64,
+ info->max_inline = min_t(u64,
info->max_inline,
root->sectorsize);
}
struct btrfs_path *path;
struct btrfs_key location;
struct inode *inode;
+ struct dentry *dentry;
u64 dir_id;
int new = 0;
return dget(sb->s_root);
}
- return d_obtain_alias(inode);
+ dentry = d_obtain_alias(inode);
+ if (!IS_ERR(dentry)) {
+ spin_lock(&dentry->d_lock);
+ dentry->d_flags &= ~DCACHE_DISCONNECTED;
+ spin_unlock(&dentry->d_lock);
+ }
+ return dentry;
}
static int btrfs_fill_super(struct super_block *sb,
btrfs_hash_exit();
}
-module_init(init_btrfs_fs)
+late_initcall(init_btrfs_fs);
module_exit(exit_btrfs_fs)
MODULE_LICENSE("GPL");
return -ENOMEM;
list_for_each_entry(dev, &fs_devices->devices, dev_list) {
- struct hd_struct *disk = dev->bdev->bd_part;
- struct kobject *disk_kobj = &part_to_dev(disk)->kobj;
+ struct hd_struct *disk;
+ struct kobject *disk_kobj;
+
+ if (!dev->bdev)
+ continue;
+
+ disk = dev->bdev->bd_part;
+ disk_kobj = &part_to_dev(disk)->kobj;
error = sysfs_create_link(fs_info->device_dir_kobj,
disk_kobj, disk_kobj->name);
static void __set_page_dirty(struct page *page,
struct address_space *mapping, int warn)
{
- spin_lock_irq(&mapping->tree_lock);
+ unsigned long flags;
+
+ spin_lock_irqsave(&mapping->tree_lock, flags);
if (page->mapping) { /* Race with truncate? */
WARN_ON_ONCE(warn && !PageUptodate(page));
account_page_dirtied(page, mapping);
radix_tree_tag_set(&mapping->page_tree,
page_index(page), PAGECACHE_TAG_DIRTY);
}
- spin_unlock_irq(&mapping->tree_lock);
+ spin_unlock_irqrestore(&mapping->tree_lock, flags);
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
}
return acl;
}
-void ceph_forget_all_cached_acls(struct inode *inode)
-{
- forget_all_cached_acls(inode);
-}
-
struct posix_acl *ceph_get_acl(struct inode *inode, int type)
{
int size;
goto out_dput;
}
- if (value)
- ret = __ceph_setxattr(dentry, name, value, size, 0);
- else
- ret = __ceph_removexattr(dentry, name);
-
+ ret = __ceph_setxattr(dentry, name, value, size, 0);
if (ret) {
if (new_mode != old_mode) {
newattrs.ia_mode = old_mode;
return p & 0xffffffff;
}
+static int fpos_cmp(loff_t l, loff_t r)
+{
+ int v = ceph_frag_compare(fpos_frag(l), fpos_frag(r));
+ if (v)
+ return v;
+ return (int)(fpos_off(l) - fpos_off(r));
+}
+
/*
* When possible, we try to satisfy a readdir by peeking at the
* dcache. We make this work by carefully ordering dentries on
if (!d_unhashed(dentry) && dentry->d_inode &&
ceph_snap(dentry->d_inode) != CEPH_SNAPDIR &&
ceph_ino(dentry->d_inode) != CEPH_INO_CEPH &&
- ctx->pos <= di->offset)
+ fpos_cmp(ctx->pos, di->offset) <= 0)
break;
dout(" skipping %p %.*s at %llu (%llu)%s%s\n", dentry,
dentry->d_name.len, dentry->d_name.name, di->offset,
ceph_mdsc_put_request(req);
if (!err)
- err = ceph_init_acl(dentry, dentry->d_inode, dir);
-
- if (err)
+ ceph_init_acl(dentry, dentry->d_inode, dir);
+ else
d_drop(dentry);
return err;
}
if (!err && !req->r_reply_info.head->is_dentry)
err = ceph_handle_notrace_create(dir, dentry);
ceph_mdsc_put_request(req);
- if (err)
+ if (!err)
+ ceph_init_acl(dentry, dentry->d_inode, dir);
+ else
d_drop(dentry);
return err;
}
err = ceph_handle_notrace_create(dir, dentry);
ceph_mdsc_put_request(req);
out:
- if (err < 0)
+ if (!err)
+ ceph_init_acl(dentry, dentry->d_inode, dir);
+ else
d_drop(dentry);
return err;
}
} else {
dout("atomic_open finish_open on dn %p\n", dn);
if (req->r_op == CEPH_MDS_OP_CREATE && req->r_reply_info.has_create_ino) {
+ ceph_init_acl(dentry, dentry->d_inode, dir);
*opened |= FILE_CREATED;
}
err = finish_open(file, dentry, ceph_open, opened);
Opt_ino32,
Opt_noino32,
Opt_fscache,
- Opt_nofscache
+ Opt_nofscache,
+#ifdef CONFIG_CEPH_FS_POSIX_ACL
+ Opt_acl,
+#endif
+ Opt_noacl
};
static match_table_t fsopt_tokens = {
{Opt_noino32, "noino32"},
{Opt_fscache, "fsc"},
{Opt_nofscache, "nofsc"},
+#ifdef CONFIG_CEPH_FS_POSIX_ACL
+ {Opt_acl, "acl"},
+#endif
+ {Opt_noacl, "noacl"},
{-1, NULL}
};
case Opt_nofscache:
fsopt->flags &= ~CEPH_MOUNT_OPT_FSCACHE;
break;
+#ifdef CONFIG_CEPH_FS_POSIX_ACL
+ case Opt_acl:
+ fsopt->sb_flags |= MS_POSIXACL;
+ break;
+#endif
+ case Opt_noacl:
+ fsopt->sb_flags &= ~MS_POSIXACL;
+ break;
default:
BUG_ON(token);
}
else
seq_puts(m, ",nofsc");
+#ifdef CONFIG_CEPH_FS_POSIX_ACL
+ if (fsopt->sb_flags & MS_POSIXACL)
+ seq_puts(m, ",acl");
+ else
+ seq_puts(m, ",noacl");
+#endif
+
if (fsopt->wsize)
seq_printf(m, ",wsize=%d", fsopt->wsize);
if (fsopt->rsize != CEPH_RSIZE_DEFAULT)
s->s_flags = fsc->mount_options->sb_flags;
s->s_maxbytes = 1ULL << 40; /* temp value until we get mdsmap */
-#ifdef CONFIG_CEPH_FS_POSIX_ACL
- s->s_flags |= MS_POSIXACL;
-#endif
s->s_xattr = ceph_xattr_handlers;
s->s_fs_info = fsc;
struct ceph_options *opt = NULL;
dout("ceph_mount\n");
+
+#ifdef CONFIG_CEPH_FS_POSIX_ACL
+ flags |= MS_POSIXACL;
+#endif
err = parse_mount_options(&fsopt, &opt, flags, data, dev_name, &path);
if (err < 0) {
res = ERR_PTR(err);
#include <linux/wait.h>
#include <linux/writeback.h>
#include <linux/slab.h>
+#include <linux/posix_acl.h>
#include <linux/ceph/libceph.h>
struct posix_acl *ceph_get_acl(struct inode *, int);
int ceph_set_acl(struct inode *inode, struct posix_acl *acl, int type);
int ceph_init_acl(struct dentry *, struct inode *, struct inode *);
-void ceph_forget_all_cached_acls(struct inode *inode);
+
+static inline void ceph_forget_all_cached_acls(struct inode *inode)
+{
+ forget_all_cached_acls(inode);
+}
#else
#define XATTR_CEPH_PREFIX "ceph."
#define XATTR_CEPH_PREFIX_LEN (sizeof (XATTR_CEPH_PREFIX) - 1)
+static int __remove_xattr(struct ceph_inode_info *ci,
+ struct ceph_inode_xattr *xattr);
+
/*
* List of handlers for synthetic system.* attributes. Other
* attributes are handled directly.
static int __set_xattr(struct ceph_inode_info *ci,
const char *name, int name_len,
const char *val, int val_len,
- int dirty,
- int should_free_name, int should_free_val,
+ int flags, int update_xattr,
struct ceph_inode_xattr **newxattr)
{
struct rb_node **p;
xattr = NULL;
}
+ if (update_xattr) {
+ int err = 0;
+ if (xattr && (flags & XATTR_CREATE))
+ err = -EEXIST;
+ else if (!xattr && (flags & XATTR_REPLACE))
+ err = -ENODATA;
+ if (err) {
+ kfree(name);
+ kfree(val);
+ return err;
+ }
+ if (update_xattr < 0) {
+ if (xattr)
+ __remove_xattr(ci, xattr);
+ kfree(name);
+ return 0;
+ }
+ }
+
if (!xattr) {
new = 1;
xattr = *newxattr;
xattr->name = name;
xattr->name_len = name_len;
- xattr->should_free_name = should_free_name;
+ xattr->should_free_name = update_xattr;
ci->i_xattrs.count++;
dout("__set_xattr count=%d\n", ci->i_xattrs.count);
if (xattr->should_free_val)
kfree((void *)xattr->val);
- if (should_free_name) {
+ if (update_xattr) {
kfree((void *)name);
name = xattr->name;
}
xattr->val = "";
xattr->val_len = val_len;
- xattr->dirty = dirty;
- xattr->should_free_val = (val && should_free_val);
+ xattr->dirty = update_xattr;
+ xattr->should_free_val = (val && update_xattr);
if (new) {
rb_link_node(&xattr->node, parent, p);
struct ceph_inode_xattr *xattr)
{
if (!xattr)
- return -EOPNOTSUPP;
+ return -ENODATA;
rb_erase(&xattr->node, &ci->i_xattrs.index);
p += len;
err = __set_xattr(ci, name, namelen, val, len,
- 0, 0, 0, &xattrs[numattr]);
+ 0, 0, &xattrs[numattr]);
if (err < 0)
goto bad;
dout("setxattr value=%.*s\n", (int)size, value);
+ if (!value)
+ flags |= CEPH_XATTR_REMOVE;
+
/* do request */
req = ceph_mdsc_create_request(mdsc, CEPH_MDS_OP_SETXATTR,
USE_AUTH_MDS);
struct ceph_inode_info *ci = ceph_inode(inode);
int issued;
int err;
- int dirty;
+ int dirty = 0;
int name_len = strlen(name);
int val_len = size;
char *newname = NULL;
goto retry;
}
- err = __set_xattr(ci, newname, name_len, newval,
- val_len, 1, 1, 1, &xattr);
+ err = __set_xattr(ci, newname, name_len, newval, val_len,
+ flags, value ? 1 : -1, &xattr);
- dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
- ci->i_xattrs.dirty = true;
- inode->i_ctime = CURRENT_TIME;
+ if (!err) {
+ dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
+ ci->i_xattrs.dirty = true;
+ inode->i_ctime = CURRENT_TIME;
+ }
spin_unlock(&ci->i_ceph_lock);
if (dirty)
return rc;
}
-static struct cifs_ntsd *get_cifs_acl_by_fid(struct cifs_sb_info *cifs_sb,
- __u16 fid, u32 *pacllen)
+struct cifs_ntsd *get_cifs_acl_by_fid(struct cifs_sb_info *cifs_sb,
+ const struct cifs_fid *cifsfid, u32 *pacllen)
{
struct cifs_ntsd *pntsd = NULL;
unsigned int xid;
return ERR_CAST(tlink);
xid = get_xid();
- rc = CIFSSMBGetCIFSACL(xid, tlink_tcon(tlink), fid, &pntsd, pacllen);
+ rc = CIFSSMBGetCIFSACL(xid, tlink_tcon(tlink), cifsfid->netfid, &pntsd,
+ pacllen);
free_xid(xid);
cifs_put_tlink(tlink);
if (!open_file)
return get_cifs_acl_by_path(cifs_sb, path, pacllen);
- pntsd = get_cifs_acl_by_fid(cifs_sb, open_file->fid.netfid, pacllen);
+ pntsd = get_cifs_acl_by_fid(cifs_sb, &open_file->fid, pacllen);
cifsFileInfo_put(open_file);
return pntsd;
}
/* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
int
cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr,
- struct inode *inode, const char *path, const __u16 *pfid)
+ struct inode *inode, const char *path,
+ const struct cifs_fid *pfid)
{
struct cifs_ntsd *pntsd = NULL;
u32 acllen = 0;
int rc = 0;
+ struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
+ struct cifs_tcon *tcon;
cifs_dbg(NOISY, "converting ACL to mode for %s\n", path);
- if (pfid)
- pntsd = get_cifs_acl_by_fid(cifs_sb, *pfid, &acllen);
- else
- pntsd = get_cifs_acl(cifs_sb, inode, path, &acllen);
+ if (IS_ERR(tlink))
+ return PTR_ERR(tlink);
+ tcon = tlink_tcon(tlink);
+ if (pfid && (tcon->ses->server->ops->get_acl_by_fid))
+ pntsd = tcon->ses->server->ops->get_acl_by_fid(cifs_sb, pfid,
+ &acllen);
+ else if (tcon->ses->server->ops->get_acl)
+ pntsd = tcon->ses->server->ops->get_acl(cifs_sb, inode, path,
+ &acllen);
+ else {
+ cifs_put_tlink(tlink);
+ return -EOPNOTSUPP;
+ }
/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
if (IS_ERR(pntsd)) {
rc = PTR_ERR(pntsd);
cifs_dbg(VFS, "parse sec desc failed rc = %d\n", rc);
}
+ cifs_put_tlink(tlink);
+
return rc;
}
__u32 secdesclen = 0;
struct cifs_ntsd *pntsd = NULL; /* acl obtained from server */
struct cifs_ntsd *pnntsd = NULL; /* modified acl to be sent to server */
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+ struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
+ struct cifs_tcon *tcon;
+
+ if (IS_ERR(tlink))
+ return PTR_ERR(tlink);
+ tcon = tlink_tcon(tlink);
cifs_dbg(NOISY, "set ACL from mode for %s\n", path);
/* Get the security descriptor */
- pntsd = get_cifs_acl(CIFS_SB(inode->i_sb), inode, path, &secdesclen);
+
+ if (tcon->ses->server->ops->get_acl == NULL) {
+ cifs_put_tlink(tlink);
+ return -EOPNOTSUPP;
+ }
+
+ pntsd = tcon->ses->server->ops->get_acl(cifs_sb, inode, path,
+ &secdesclen);
if (IS_ERR(pntsd)) {
rc = PTR_ERR(pntsd);
cifs_dbg(VFS, "%s: error %d getting sec desc\n", __func__, rc);
- goto out;
+ cifs_put_tlink(tlink);
+ return rc;
}
/*
pnntsd = kmalloc(secdesclen, GFP_KERNEL);
if (!pnntsd) {
kfree(pntsd);
+ cifs_put_tlink(tlink);
return -ENOMEM;
}
cifs_dbg(NOISY, "build_sec_desc rc: %d\n", rc);
+ if (tcon->ses->server->ops->set_acl == NULL)
+ rc = -EOPNOTSUPP;
+
if (!rc) {
/* Set the security descriptor */
- rc = set_cifs_acl(pnntsd, secdesclen, inode, path, aclflag);
+ rc = tcon->ses->server->ops->set_acl(pnntsd, secdesclen, inode,
+ path, aclflag);
cifs_dbg(NOISY, "set_cifs_acl rc: %d\n", rc);
}
+ cifs_put_tlink(tlink);
kfree(pnntsd);
kfree(pntsd);
-out:
return rc;
}
/* async read from the server */
int (*async_readv)(struct cifs_readdata *);
/* async write to the server */
- int (*async_writev)(struct cifs_writedata *);
+ int (*async_writev)(struct cifs_writedata *,
+ void (*release)(struct kref *));
/* sync read from the server */
int (*sync_read)(const unsigned int, struct cifsFileInfo *,
struct cifs_io_parms *, unsigned int *, char **,
int (*set_EA)(const unsigned int, struct cifs_tcon *, const char *,
const char *, const void *, const __u16,
const struct nls_table *, int);
+ struct cifs_ntsd * (*get_acl)(struct cifs_sb_info *, struct inode *,
+ const char *, u32 *);
+ struct cifs_ntsd * (*get_acl_by_fid)(struct cifs_sb_info *,
+ const struct cifs_fid *, u32 *);
+ int (*set_acl)(struct cifs_ntsd *, __u32, struct inode *, const char *,
+ int);
};
struct smb_version_values {
unsigned int pagesz;
unsigned int tailsz;
unsigned int nr_pages;
- struct page *pages[1];
+ struct page *pages[];
};
/*
extern int cifs_get_inode_info(struct inode **inode, const char *full_path,
FILE_ALL_INFO *data, struct super_block *sb,
- int xid, const __u16 *fid);
+ int xid, const struct cifs_fid *fid);
extern int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path,
struct super_block *sb, unsigned int xid);
const unsigned int xid);
extern int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
struct cifs_fattr *fattr, struct inode *inode,
- const char *path, const __u16 *pfid);
+ const char *path, const struct cifs_fid *pfid);
extern int id_mode_to_cifs_acl(struct inode *inode, const char *path, __u64,
kuid_t, kgid_t);
extern struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *, struct inode *,
const char *, u32 *);
+extern struct cifs_ntsd *get_cifs_acl_by_fid(struct cifs_sb_info *,
+ const struct cifs_fid *, u32 *);
extern int set_cifs_acl(struct cifs_ntsd *, __u32, struct inode *,
const char *, int);
int cifs_async_readv(struct cifs_readdata *rdata);
int cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid);
-int cifs_async_writev(struct cifs_writedata *wdata);
+int cifs_async_writev(struct cifs_writedata *wdata,
+ void (*release)(struct kref *kref));
void cifs_writev_complete(struct work_struct *work);
struct cifs_writedata *cifs_writedata_alloc(unsigned int nr_pages,
work_func_t complete);
do {
server = tlink_tcon(wdata->cfile->tlink)->ses->server;
- rc = server->ops->async_writev(wdata);
+ rc = server->ops->async_writev(wdata, cifs_writedata_release);
} while (rc == -EAGAIN);
for (i = 0; i < wdata->nr_pages; i++) {
{
struct cifs_writedata *wdata;
- /* this would overflow */
- if (nr_pages == 0) {
- cifs_dbg(VFS, "%s: called with nr_pages == 0!\n", __func__);
- return NULL;
- }
-
/* writedata + number of page pointers */
wdata = kzalloc(sizeof(*wdata) +
- sizeof(struct page *) * (nr_pages - 1), GFP_NOFS);
+ sizeof(struct page *) * nr_pages, GFP_NOFS);
if (wdata != NULL) {
kref_init(&wdata->refcount);
INIT_LIST_HEAD(&wdata->list);
/* cifs_async_writev - send an async write, and set up mid to handle result */
int
-cifs_async_writev(struct cifs_writedata *wdata)
+cifs_async_writev(struct cifs_writedata *wdata,
+ void (*release)(struct kref *kref))
{
int rc = -EACCES;
WRITE_REQ *smb = NULL;
if (rc == 0)
cifs_stats_inc(&tcon->stats.cifs_stats.num_writes);
else
- kref_put(&wdata->refcount, cifs_writedata_release);
+ kref_put(&wdata->refcount, release);
async_writev_out:
cifs_small_buf_release(smb);
xid);
else {
rc = cifs_get_inode_info(&newinode, full_path, buf, inode->i_sb,
- xid, &fid->netfid);
+ xid, fid);
if (newinode) {
if (server->ops->set_lease_key)
server->ops->set_lease_key(newinode, fid);
xid);
else
rc = cifs_get_inode_info(&inode, full_path, buf, inode->i_sb,
- xid, &fid->netfid);
+ xid, fid);
out:
kfree(buf);
}
wdata->pid = wdata->cfile->pid;
server = tlink_tcon(wdata->cfile->tlink)->ses->server;
- rc = server->ops->async_writev(wdata);
+ rc = server->ops->async_writev(wdata,
+ cifs_writedata_release);
} while (wbc->sync_mode == WB_SYNC_ALL && rc == -EAGAIN);
for (i = 0; i < nr_pages; ++i)
}
static void
-cifs_uncached_writev_complete(struct work_struct *work)
+cifs_uncached_writedata_release(struct kref *refcount)
{
int i;
+ struct cifs_writedata *wdata = container_of(refcount,
+ struct cifs_writedata, refcount);
+
+ for (i = 0; i < wdata->nr_pages; i++)
+ put_page(wdata->pages[i]);
+ cifs_writedata_release(refcount);
+}
+
+static void
+cifs_uncached_writev_complete(struct work_struct *work)
+{
struct cifs_writedata *wdata = container_of(work,
struct cifs_writedata, work);
struct inode *inode = wdata->cfile->dentry->d_inode;
complete(&wdata->done);
- if (wdata->result != -EAGAIN) {
- for (i = 0; i < wdata->nr_pages; i++)
- put_page(wdata->pages[i]);
- }
-
- kref_put(&wdata->refcount, cifs_writedata_release);
+ kref_put(&wdata->refcount, cifs_uncached_writedata_release);
}
/* attempt to send write to server, retry on any -EAGAIN errors */
if (rc != 0)
continue;
}
- rc = server->ops->async_writev(wdata);
+ rc = server->ops->async_writev(wdata,
+ cifs_uncached_writedata_release);
} while (rc == -EAGAIN);
return rc;
unsigned long nr_segs, loff_t *poffset)
{
unsigned long nr_pages, i;
- size_t copied, len, cur_len;
+ size_t bytes, copied, len, cur_len;
ssize_t total_written = 0;
loff_t offset;
struct iov_iter it;
save_len = cur_len;
for (i = 0; i < nr_pages; i++) {
- copied = min_t(const size_t, cur_len, PAGE_SIZE);
+ bytes = min_t(const size_t, cur_len, PAGE_SIZE);
copied = iov_iter_copy_from_user(wdata->pages[i], &it,
- 0, copied);
+ 0, bytes);
cur_len -= copied;
iov_iter_advance(&it, copied);
+ /*
+ * If we didn't copy as much as we expected, then that
+ * may mean we trod into an unmapped area. Stop copying
+ * at that point. On the next pass through the big
+ * loop, we'll likely end up getting a zero-length
+ * write and bailing out of it.
+ */
+ if (copied < bytes)
+ break;
}
cur_len = save_len - cur_len;
+ /*
+ * If we have no data to send, then that probably means that
+ * the copy above failed altogether. That's most likely because
+ * the address in the iovec was bogus. Set the rc to -EFAULT,
+ * free anything we allocated and bail out.
+ */
+ if (!cur_len) {
+ for (i = 0; i < nr_pages; i++)
+ put_page(wdata->pages[i]);
+ kfree(wdata);
+ rc = -EFAULT;
+ break;
+ }
+
+ /*
+ * i + 1 now represents the number of pages we actually used in
+ * the copy phase above. Bring nr_pages down to that, and free
+ * any pages that we didn't use.
+ */
+ for ( ; nr_pages > i + 1; nr_pages--)
+ put_page(wdata->pages[nr_pages - 1]);
+
wdata->sync_mode = WB_SYNC_ALL;
wdata->nr_pages = nr_pages;
wdata->offset = (__u64)offset;
wdata->tailsz = cur_len - ((nr_pages - 1) * PAGE_SIZE);
rc = cifs_uncached_retry_writev(wdata);
if (rc) {
- kref_put(&wdata->refcount, cifs_writedata_release);
+ kref_put(&wdata->refcount,
+ cifs_uncached_writedata_release);
break;
}
}
}
list_del_init(&wdata->list);
- kref_put(&wdata->refcount, cifs_writedata_release);
+ kref_put(&wdata->refcount, cifs_uncached_writedata_release);
}
if (total_written > 0)
if (rc > 0) {
ssize_t err;
- err = generic_write_sync(file, pos, rc);
- if (err < 0 && rc > 0)
+ err = generic_write_sync(file, iocb->ki_pos - rc, rc);
+ if (err < 0)
rc = err;
}
return PTR_ERR(tlink);
tcon = tlink_tcon(tlink);
- rc = CIFSSMBQAllEAs(xid, tcon, path, "SETFILEBITS",
- ea_value, 4 /* size of buf */, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (tcon->ses->server->ops->query_all_EAs == NULL) {
+ cifs_put_tlink(tlink);
+ return -EOPNOTSUPP;
+ }
+
+ rc = tcon->ses->server->ops->query_all_EAs(xid, tcon, path,
+ "SETFILEBITS", ea_value, 4 /* size of buf */,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
cifs_put_tlink(tlink);
if (rc < 0)
return (int)rc;
int
cifs_get_inode_info(struct inode **inode, const char *full_path,
FILE_ALL_INFO *data, struct super_block *sb, int xid,
- const __u16 *fid)
+ const struct cifs_fid *fid)
{
bool validinum = false;
__u16 srchflgs;
.query_mf_symlink = cifs_query_mf_symlink,
.create_mf_symlink = cifs_create_mf_symlink,
.is_read_op = cifs_is_read_op,
+#ifdef CONFIG_CIFS_XATTR
+ .query_all_EAs = CIFSSMBQAllEAs,
+ .set_EA = CIFSSMBSetEA,
+#endif /* CIFS_XATTR */
+#ifdef CONFIG_CIFS_ACL
+ .get_acl = get_cifs_acl,
+ .get_acl_by_fid = get_cifs_acl_by_fid,
+ .set_acl = set_cifs_acl,
+#endif /* CIFS_ACL */
};
struct smb_version_values smb1_values = {
#define SMB2_CMACAES_SIZE (16)
#define SMB3_SIGNKEY_SIZE (16)
+/* Maximum buffer size value we can send with 1 credit */
+#define SMB2_MAX_BUFFER_SIZE 65536
+
#endif /* _SMB2_GLOB_H */
/* start with specified wsize, or default */
wsize = volume_info->wsize ? volume_info->wsize : CIFS_DEFAULT_IOSIZE;
wsize = min_t(unsigned int, wsize, server->max_write);
- /*
- * limit write size to 2 ** 16, because we don't support multicredit
- * requests now.
- */
- wsize = min_t(unsigned int, wsize, 2 << 15);
+ /* set it to the maximum buffer size value we can send with 1 credit */
+ wsize = min_t(unsigned int, wsize, SMB2_MAX_BUFFER_SIZE);
return wsize;
}
/* start with specified rsize, or default */
rsize = volume_info->rsize ? volume_info->rsize : CIFS_DEFAULT_IOSIZE;
rsize = min_t(unsigned int, rsize, server->max_read);
- /*
- * limit write size to 2 ** 16, because we don't support multicredit
- * requests now.
- */
- rsize = min_t(unsigned int, rsize, 2 << 15);
+ /* set it to the maximum buffer size value we can send with 1 credit */
+ rsize = min_t(unsigned int, rsize, SMB2_MAX_BUFFER_SIZE);
return rsize;
}
/* SMB2 only has an extended negflavor */
server->negflavor = CIFS_NEGFLAVOR_EXTENDED;
- server->maxBuf = le32_to_cpu(rsp->MaxTransactSize);
+ /* set it to the maximum buffer size value we can send with 1 credit */
+ server->maxBuf = min_t(unsigned int, le32_to_cpu(rsp->MaxTransactSize),
+ SMB2_MAX_BUFFER_SIZE);
server->max_read = le32_to_cpu(rsp->MaxReadSize);
server->max_write = le32_to_cpu(rsp->MaxWriteSize);
/* BB Do we need to validate the SecurityMode? */
/* smb2_async_writev - send an async write, and set up mid to handle result */
int
-smb2_async_writev(struct cifs_writedata *wdata)
+smb2_async_writev(struct cifs_writedata *wdata,
+ void (*release)(struct kref *kref))
{
int rc = -EACCES;
struct smb2_write_req *req = NULL;
smb2_writev_callback, wdata, 0);
if (rc) {
- kref_put(&wdata->refcount, cifs_writedata_release);
+ kref_put(&wdata->refcount, release);
cifs_stats_fail_inc(tcon, SMB2_WRITE_HE);
}
extern int smb2_async_readv(struct cifs_readdata *rdata);
extern int SMB2_read(const unsigned int xid, struct cifs_io_parms *io_parms,
unsigned int *nbytes, char **buf, int *buf_type);
-extern int smb2_async_writev(struct cifs_writedata *wdata);
+extern int smb2_async_writev(struct cifs_writedata *wdata,
+ void (*release)(struct kref *kref));
extern int SMB2_write(const unsigned int xid, struct cifs_io_parms *io_parms,
unsigned int *nbytes, struct kvec *iov, int n_vec);
extern int SMB2_echo(struct TCP_Server_Info *server);
rc = -ENOMEM;
} else {
memcpy(pacl, ea_value, value_size);
- rc = set_cifs_acl(pacl, value_size,
- direntry->d_inode, full_path, CIFS_ACL_DACL);
+ if (pTcon->ses->server->ops->set_acl)
+ rc = pTcon->ses->server->ops->set_acl(pacl,
+ value_size, direntry->d_inode,
+ full_path, CIFS_ACL_DACL);
+ else
+ rc = -EOPNOTSUPP;
if (rc == 0) /* force revalidate of the inode */
CIFS_I(direntry->d_inode)->time = 0;
kfree(pacl);
u32 acllen;
struct cifs_ntsd *pacl;
- pacl = get_cifs_acl(cifs_sb, direntry->d_inode,
- full_path, &acllen);
+ if (pTcon->ses->server->ops->get_acl == NULL)
+ goto get_ea_exit; /* rc already EOPNOTSUPP */
+
+ pacl = pTcon->ses->server->ops->get_acl(cifs_sb,
+ direntry->d_inode, full_path, &acllen);
if (IS_ERR(pacl)) {
rc = PTR_ERR(pacl);
cifs_dbg(VFS, "%s: error %zd getting sec desc\n",
#endif /* CONFIG_MMU */
-struct file *open_exec(const char *name)
+static struct file *do_open_exec(struct filename *name)
{
struct file *file;
int err;
- struct filename tmp = { .name = name };
static const struct open_flags open_exec_flags = {
.open_flag = O_LARGEFILE | O_RDONLY | __FMODE_EXEC,
.acc_mode = MAY_EXEC | MAY_OPEN,
.lookup_flags = LOOKUP_FOLLOW,
};
- file = do_filp_open(AT_FDCWD, &tmp, &open_exec_flags);
+ file = do_filp_open(AT_FDCWD, name, &open_exec_flags);
if (IS_ERR(file))
goto out;
fput(file);
return ERR_PTR(err);
}
+
+struct file *open_exec(const char *name)
+{
+ struct filename tmp = { .name = name };
+ return do_open_exec(&tmp);
+}
EXPORT_SYMBOL(open_exec);
int kernel_read(struct file *file, loff_t offset,
return -ENOMEM;
}
-void free_bprm(struct linux_binprm *bprm)
+static void free_bprm(struct linux_binprm *bprm)
{
free_arg_pages(bprm);
if (bprm->cred) {
/*
* sys_execve() executes a new program.
*/
-static int do_execve_common(const char *filename,
+static int do_execve_common(struct filename *filename,
struct user_arg_ptr argv,
struct user_arg_ptr envp)
{
struct files_struct *displaced;
int retval;
+ if (IS_ERR(filename))
+ return PTR_ERR(filename);
+
/*
* We move the actual failure in case of RLIMIT_NPROC excess from
* set*uid() to execve() because too many poorly written programs
check_unsafe_exec(bprm);
current->in_execve = 1;
- file = open_exec(filename);
+ file = do_open_exec(filename);
retval = PTR_ERR(file);
if (IS_ERR(file))
goto out_unmark;
sched_exec();
bprm->file = file;
- bprm->filename = filename;
- bprm->interp = filename;
+ bprm->filename = bprm->interp = filename->name;
retval = bprm_mm_init(bprm);
if (retval)
acct_update_integrals(current);
task_numa_free(current);
free_bprm(bprm);
+ putname(filename);
if (displaced)
put_files_struct(displaced);
return retval;
if (displaced)
reset_files_struct(displaced);
out_ret:
+ putname(filename);
return retval;
}
-int do_execve(const char *filename,
+int do_execve(struct filename *filename,
const char __user *const __user *__argv,
const char __user *const __user *__envp)
{
}
#ifdef CONFIG_COMPAT
-static int compat_do_execve(const char *filename,
+static int compat_do_execve(struct filename *filename,
const compat_uptr_t __user *__argv,
const compat_uptr_t __user *__envp)
{
const char __user *const __user *, argv,
const char __user *const __user *, envp)
{
- struct filename *path = getname(filename);
- int error = PTR_ERR(path);
- if (!IS_ERR(path)) {
- error = do_execve(path->name, argv, envp);
- putname(path);
- }
- return error;
+ return do_execve(getname(filename), argv, envp);
}
#ifdef CONFIG_COMPAT
asmlinkage long compat_sys_execve(const char __user * filename,
const compat_uptr_t __user * argv,
const compat_uptr_t __user * envp)
{
- struct filename *path = getname(filename);
- int error = PTR_ERR(path);
- if (!IS_ERR(path)) {
- error = compat_do_execve(path->name, argv, envp);
- putname(path);
- }
- return error;
+ return compat_do_execve(getname(filename), argv, envp);
}
#endif
if (EXT4_FITS_IN_INODE(raw_inode, einode, xtime)) \
(einode)->xtime.tv_sec = \
(signed)le32_to_cpu((raw_inode)->xtime); \
+ else \
+ (einode)->xtime.tv_sec = 0; \
if (EXT4_FITS_IN_INODE(raw_inode, einode, xtime ## _extra)) \
ext4_decode_extra_time(&(einode)->xtime, \
raw_inode->xtime ## _extra); \
} else
err = ret;
map->m_flags |= EXT4_MAP_MAPPED;
+ map->m_pblk = newblock;
if (allocated > map->m_len)
allocated = map->m_len;
map->m_len = allocated;
if (ret > 0) {
ssize_t err;
- err = generic_write_sync(file, pos, ret);
+ err = generic_write_sync(file, iocb->ki_pos - ret, ret);
if (err < 0 && ret > 0)
ret = err;
}
handle = ext4_journal_start(inode_bl, EXT4_HT_MOVE_EXTENTS, 2);
if (IS_ERR(handle)) {
err = -EINVAL;
- goto swap_boot_out;
+ goto journal_err_out;
}
/* Protect extent tree against block allocations via delalloc */
ext4_double_up_write_data_sem(inode, inode_bl);
+journal_err_out:
ext4_inode_resume_unlocked_dio(inode);
ext4_inode_resume_unlocked_dio(inode_bl);
ext4_group_t group;
ext4_group_t last_group;
unsigned overhead;
+ __u16 uninit_mask = (flexbg_size > 1) ? ~EXT4_BG_BLOCK_UNINIT : ~0;
BUG_ON(flex_gd->count == 0 || group_data == NULL);
src_group++;
for (; src_group <= last_group; src_group++) {
overhead = ext4_group_overhead_blocks(sb, src_group);
- if (overhead != 0)
+ if (overhead == 0)
last_blk += group_data[src_group - group].blocks_count;
else
break;
group = ext4_get_group_number(sb, start_blk - 1);
group -= group_data[0].group;
group_data[group].free_blocks_count--;
- if (flexbg_size > 1)
- flex_gd->bg_flags[group] &= ~EXT4_BG_BLOCK_UNINIT;
+ flex_gd->bg_flags[group] &= uninit_mask;
}
/* Allocate inode bitmaps */
group = ext4_get_group_number(sb, start_blk - 1);
group -= group_data[0].group;
group_data[group].free_blocks_count--;
- if (flexbg_size > 1)
- flex_gd->bg_flags[group] &= ~EXT4_BG_BLOCK_UNINIT;
+ flex_gd->bg_flags[group] &= uninit_mask;
}
/* Allocate inode tables */
for (; it_index < flex_gd->count; it_index++) {
- if (start_blk + EXT4_SB(sb)->s_itb_per_group > last_blk)
+ unsigned int itb = EXT4_SB(sb)->s_itb_per_group;
+ ext4_fsblk_t next_group_start;
+
+ if (start_blk + itb > last_blk)
goto next_group;
group_data[it_index].inode_table = start_blk;
- group = ext4_get_group_number(sb, start_blk - 1);
+ group = ext4_get_group_number(sb, start_blk);
+ next_group_start = ext4_group_first_block_no(sb, group + 1);
group -= group_data[0].group;
- group_data[group].free_blocks_count -=
- EXT4_SB(sb)->s_itb_per_group;
- if (flexbg_size > 1)
- flex_gd->bg_flags[group] &= ~EXT4_BG_BLOCK_UNINIT;
+ if (start_blk + itb > next_group_start) {
+ flex_gd->bg_flags[group + 1] &= uninit_mask;
+ overhead = start_blk + itb - next_group_start;
+ group_data[group + 1].free_blocks_count -= overhead;
+ itb -= overhead;
+ }
+
+ group_data[group].free_blocks_count -= itb;
+ flex_gd->bg_flags[group] &= uninit_mask;
start_blk += EXT4_SB(sb)->s_itb_per_group;
}
start = ext4_group_first_block_no(sb, group);
group -= flex_gd->groups[0].group;
- count2 = sb->s_blocksize * 8 - (block - start);
+ count2 = EXT4_BLOCKS_PER_GROUP(sb) - (block - start);
if (count2 > count)
count2 = count;
if (err)
goto out;
count = group_table_count[j];
- start = group_data[i].block_bitmap;
+ start = (&group_data[i].block_bitmap)[j];
block = start;
}
for (i = 0; i < 4; i++)
sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
sbi->s_def_hash_version = es->s_def_hash_version;
- i = le32_to_cpu(es->s_flags);
- if (i & EXT2_FLAGS_UNSIGNED_HASH)
- sbi->s_hash_unsigned = 3;
- else if ((i & EXT2_FLAGS_SIGNED_HASH) == 0) {
+ if (EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_DIR_INDEX)) {
+ i = le32_to_cpu(es->s_flags);
+ if (i & EXT2_FLAGS_UNSIGNED_HASH)
+ sbi->s_hash_unsigned = 3;
+ else if ((i & EXT2_FLAGS_SIGNED_HASH) == 0) {
#ifdef __CHAR_UNSIGNED__
- es->s_flags |= cpu_to_le32(EXT2_FLAGS_UNSIGNED_HASH);
- sbi->s_hash_unsigned = 3;
+ if (!(sb->s_flags & MS_RDONLY))
+ es->s_flags |=
+ cpu_to_le32(EXT2_FLAGS_UNSIGNED_HASH);
+ sbi->s_hash_unsigned = 3;
#else
- es->s_flags |= cpu_to_le32(EXT2_FLAGS_SIGNED_HASH);
+ if (!(sb->s_flags & MS_RDONLY))
+ es->s_flags |=
+ cpu_to_le32(EXT2_FLAGS_SIGNED_HASH);
#endif
+ }
}
/* Handle clustersize */
* vmalloc() if the allocation size will be considered "large" by the VM.
*/
if (size <= (PAGE_SIZE << PAGE_ALLOC_COSTLY_ORDER)) {
- void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN);
+ void *data = kmalloc(size, GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY);
if (data != NULL)
return data;
}
struct fscache_object *xobj;
struct rb_node **p = &fscache_object_list.rb_node, *parent = NULL;
+ ASSERT(RB_EMPTY_NODE(&obj->objlist_link));
+
write_lock(&fscache_object_list_lock);
while (*p) {
*/
void fscache_objlist_remove(struct fscache_object *obj)
{
+ if (RB_EMPTY_NODE(&obj->objlist_link))
+ return;
+
write_lock(&fscache_object_list_lock);
BUG_ON(RB_EMPTY_ROOT(&fscache_object_list));
object->cache = cache;
object->cookie = cookie;
object->parent = NULL;
+#ifdef CONFIG_FSCACHE_OBJECT_LIST
+ RB_CLEAR_NODE(&object->objlist_link);
+#endif
object->oob_event_mask = 0;
for (t = object->oob_table; t->events; t++)
* similarly constrained call sites
*/
ret = start_this_handle(journal, handle, GFP_NOFS);
- if (ret < 0)
+ if (ret < 0) {
jbd2_journal_free_reserved(handle);
+ return ret;
+ }
handle->h_type = type;
handle->h_line_no = line_no;
- return ret;
+ return 0;
}
EXPORT_SYMBOL(jbd2_journal_start_reserved);
int rc;
tid_t tid;
- if ((rc = can_set_xattr(inode, name, value, value_len)))
- return rc;
-
/*
* If this is a request for a synthetic attribute in the system.*
* namespace use the generic infrastructure to resolve a handler
if (!strncmp(name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN))
return generic_setxattr(dentry, name, value, value_len, flags);
+ if ((rc = can_set_xattr(inode, name, value, value_len)))
+ return rc;
+
if (value == NULL) { /* empty EA, do not remove */
value = "";
value_len = 0;
int rc;
tid_t tid;
- if ((rc = can_set_xattr(inode, name, NULL, 0)))
- return rc;
-
/*
* If this is a request for a synthetic attribute in the system.*
* namespace use the generic infrastructure to resolve a handler
if (!strncmp(name, XATTR_SYSTEM_PREFIX, XATTR_SYSTEM_PREFIX_LEN))
return generic_removexattr(dentry, name);
+ if ((rc = can_set_xattr(inode, name, NULL, 0)))
+ return rc;
+
tid = txBegin(inode->i_sb, 0);
mutex_lock(&ji->commit_mutex);
rc = __jfs_setxattr(tid, dentry->d_inode, name, NULL, 0, XATTR_REPLACE);
* attributes are handled directly.
*/
const struct xattr_handler *jfs_xattr_handlers[] = {
-#ifdef JFS_POSIX_ACL
+#ifdef CONFIG_JFS_POSIX_ACL
&posix_acl_access_xattr_handler,
&posix_acl_default_xattr_handler,
#endif
kn->u.completion = (void *)&wait;
- rwsem_acquire(&kn->dep_map, 0, 0, _RET_IP_);
+ if (kn->flags & KERNFS_LOCKDEP)
+ rwsem_acquire(&kn->dep_map, 0, 0, _RET_IP_);
/* atomic_add_return() is a mb(), put_active() will always see
* the updated kn->u.completion.
*/
v = atomic_add_return(KN_DEACTIVATED_BIAS, &kn->active);
if (v != KN_DEACTIVATED_BIAS) {
- lock_contended(&kn->dep_map, _RET_IP_);
+ if (kn->flags & KERNFS_LOCKDEP)
+ lock_contended(&kn->dep_map, _RET_IP_);
wait_for_completion(&wait);
}
- lock_acquired(&kn->dep_map, _RET_IP_);
- rwsem_release(&kn->dep_map, 1, _RET_IP_);
+ if (kn->flags & KERNFS_LOCKDEP) {
+ lock_acquired(&kn->dep_map, _RET_IP_);
+ rwsem_release(&kn->dep_map, 1, _RET_IP_);
+ }
}
/**
struct nlm_file *file = block->b_file;
struct nlm_lock *lock = &block->b_call->a_args.lock;
int error;
+ loff_t fl_start, fl_end;
dprintk("lockd: grant blocked lock %p\n", block);
}
/* Try the lock operation again */
+ /* vfs_lock_file() can mangle fl_start and fl_end, but we need
+ * them unchanged for the GRANT_MSG
+ */
lock->fl.fl_flags |= FL_SLEEP;
+ fl_start = lock->fl.fl_start;
+ fl_end = lock->fl.fl_end;
error = vfs_lock_file(file->f_file, F_SETLK, &lock->fl, NULL);
lock->fl.fl_flags &= ~FL_SLEEP;
+ lock->fl.fl_start = fl_start;
+ lock->fl.fl_end = fl_end;
switch (error) {
case 0:
goto error;
result->uptr = filename;
+ result->aname = NULL;
audit_getname(result);
return result;
return getname_flags(filename, 0, NULL);
}
+/*
+ * The "getname_kernel()" interface doesn't do pathnames longer
+ * than EMBEDDED_NAME_MAX. Deal with it - you're a kernel user.
+ */
+struct filename *
+getname_kernel(const char * filename)
+{
+ struct filename *result;
+ char *kname;
+ int len;
+
+ len = strlen(filename);
+ if (len >= EMBEDDED_NAME_MAX)
+ return ERR_PTR(-ENAMETOOLONG);
+
+ result = __getname();
+ if (unlikely(!result))
+ return ERR_PTR(-ENOMEM);
+
+ kname = (char *)result + sizeof(*result);
+ result->name = kname;
+ result->uptr = NULL;
+ result->aname = NULL;
+ result->separate = false;
+
+ strlcpy(kname, filename, EMBEDDED_NAME_MAX);
+ return result;
+}
+
#ifdef CONFIG_AUDITSYSCALL
void putname(struct filename *name)
{
GFP_KERNEL)) {
SetPageUptodate(page);
unlock_page(page);
+ /*
+ * add_to_page_cache_lru() grabs an extra page refcount.
+ * Drop it here to avoid leaking this page later.
+ */
+ page_cache_release(page);
} else
__free_page(page);
}
if (res.acl_access != NULL) {
- if (posix_acl_equiv_mode(res.acl_access, NULL) ||
+ if ((posix_acl_equiv_mode(res.acl_access, NULL) == 0) ||
res.acl_access->a_count == 0) {
posix_acl_release(res.acl_access);
res.acl_access = NULL;
return ERR_PTR(status);
}
-int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
+static int __nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
struct posix_acl *dfacl)
{
struct nfs_server *server = NFS_SERVER(inode);
return status;
}
+int nfs3_proc_setacls(struct inode *inode, struct posix_acl *acl,
+ struct posix_acl *dfacl)
+{
+ int ret;
+ ret = __nfs3_proc_setacls(inode, acl, dfacl);
+ return (ret == -EOPNOTSUPP) ? 0 : ret;
+
+}
+
int nfs3_set_acl(struct inode *inode, struct posix_acl *acl, int type)
{
struct posix_acl *alloc = NULL, *dfacl = NULL;
if (IS_ERR(alloc))
goto fail;
}
- status = nfs3_proc_setacls(inode, acl, dfacl);
+ status = __nfs3_proc_setacls(inode, acl, dfacl);
posix_acl_release(alloc);
return status;
return PTR_ERR(alloc);
}
-int nfs3_proc_set_default_acl(struct inode *dir, struct inode *inode,
- umode_t mode)
-{
- struct posix_acl *default_acl, *acl;
- int error;
-
- error = posix_acl_create(dir, &mode, &default_acl, &acl);
- if (error)
- return (error == -EOPNOTSUPP) ? 0 : error;
-
- error = nfs3_proc_setacls(inode, acl, default_acl);
-
- if (acl)
- posix_acl_release(acl);
- if (default_acl)
- posix_acl_release(default_acl);
- return error;
-}
-
const struct xattr_handler *nfs3_xattr_handlers[] = {
&posix_acl_access_xattr_handler,
&posix_acl_default_xattr_handler,
void nfs40_shutdown_client(struct nfs_client *clp)
{
if (clp->cl_slot_tbl) {
- nfs4_release_slot_table(clp->cl_slot_tbl);
+ nfs4_shutdown_slot_table(clp->cl_slot_tbl);
kfree(clp->cl_slot_tbl);
}
}
{
struct nfs4_opendata *data = calldata;
- nfs40_setup_sequence(data->o_arg.server, &data->o_arg.seq_args,
- &data->o_res.seq_res, task);
+ nfs40_setup_sequence(data->o_arg.server, &data->c_arg.seq_args,
+ &data->c_res.seq_res, task);
}
static void nfs4_open_confirm_done(struct rpc_task *task, void *calldata)
{
struct nfs4_opendata *data = calldata;
- nfs40_sequence_done(task, &data->o_res.seq_res);
+ nfs40_sequence_done(task, &data->c_res.seq_res);
data->rpc_status = task->tk_status;
if (data->rpc_status == 0) {
};
int status;
- nfs4_init_sequence(&data->o_arg.seq_args, &data->o_res.seq_res, 1);
+ nfs4_init_sequence(&data->c_arg.seq_args, &data->c_res.seq_res, 1);
kref_get(&data->kref);
data->rpc_done = 0;
data->rpc_status = 0;
return ret;
}
+/*
+ * nfs4_release_slot_table - release all slot table entries
+ */
+static void nfs4_release_slot_table(struct nfs4_slot_table *tbl)
+{
+ nfs4_shrink_slot_table(tbl, 0);
+}
+
/**
- * nfs4_release_slot_table - release resources attached to a slot table
+ * nfs4_shutdown_slot_table - release resources attached to a slot table
* @tbl: slot table to shut down
*
*/
-void nfs4_release_slot_table(struct nfs4_slot_table *tbl)
+void nfs4_shutdown_slot_table(struct nfs4_slot_table *tbl)
{
- nfs4_shrink_slot_table(tbl, 0);
+ nfs4_release_slot_table(tbl);
+ rpc_destroy_wait_queue(&tbl->slot_tbl_waitq);
}
/**
spin_unlock(&tbl->slot_tbl_lock);
}
-static void nfs4_destroy_session_slot_tables(struct nfs4_session *session)
+static void nfs4_release_session_slot_tables(struct nfs4_session *session)
{
nfs4_release_slot_table(&session->fc_slot_table);
nfs4_release_slot_table(&session->bc_slot_table);
if (status && tbl->slots == NULL)
/* Fore and back channel share a connection so get
* both slot tables or neither */
- nfs4_destroy_session_slot_tables(ses);
+ nfs4_release_session_slot_tables(ses);
return status;
}
return session;
}
+static void nfs4_destroy_session_slot_tables(struct nfs4_session *session)
+{
+ nfs4_shutdown_slot_table(&session->fc_slot_table);
+ nfs4_shutdown_slot_table(&session->bc_slot_table);
+}
+
void nfs4_destroy_session(struct nfs4_session *session)
{
struct rpc_xprt *xprt;
extern int nfs4_setup_slot_table(struct nfs4_slot_table *tbl,
unsigned int max_reqs, const char *queue);
-extern void nfs4_release_slot_table(struct nfs4_slot_table *tbl);
+extern void nfs4_shutdown_slot_table(struct nfs4_slot_table *tbl);
extern struct nfs4_slot *nfs4_alloc_slot(struct nfs4_slot_table *tbl);
extern void nfs4_free_slot(struct nfs4_slot_table *tbl, struct nfs4_slot *slot);
extern void nfs4_slot_tbl_drain_complete(struct nfs4_slot_table *tbl);
pacl = posix_acl_from_mode(inode->i_mode, GFP_KERNEL);
if (IS_ERR(pacl))
return PTR_ERR(pacl);
- /* allocate for worst case: one (deny, allow) pair each: */
- size += 2 * pacl->a_count;
}
+ /* allocate for worst case: one (deny, allow) pair each: */
+ size += 2 * pacl->a_count;
if (S_ISDIR(inode->i_mode)) {
flags = NFS4_ACL_DIR;
dpacl = get_acl(inode, ACL_TYPE_DEFAULT);
if (dpacl)
size += 2 * dpacl->a_count;
- } else {
- dpacl = NULL;
}
*acl = nfs4_acl_new(size);
goto out;
}
- if (pacl)
- _posix_to_nfsv4_one(pacl, *acl, flags & ~NFS4_ACL_TYPE_DEFAULT);
+ _posix_to_nfsv4_one(pacl, *acl, flags & ~NFS4_ACL_TYPE_DEFAULT);
if (dpacl)
_posix_to_nfsv4_one(dpacl, *acl, flags | NFS4_ACL_TYPE_DEFAULT);
ret = ntfs_file_aio_write_nolock(iocb, iov, nr_segs, &iocb->ki_pos);
mutex_unlock(&inode->i_mutex);
if (ret > 0) {
- int err = generic_write_sync(file, pos, ret);
+ int err = generic_write_sync(file, iocb->ki_pos - ret, ret);
if (err < 0)
ret = err;
}
enum ocfs2_alloc_restarted *reason_ret)
{
int status = 0, err = 0;
+ int need_free = 0;
int free_extents;
enum ocfs2_alloc_restarted reason = RESTART_NONE;
u32 bit_off, num_bits;
OCFS2_JOURNAL_ACCESS_WRITE);
if (status < 0) {
mlog_errno(status);
- goto leave;
+ need_free = 1;
+ goto bail;
}
block = ocfs2_clusters_to_blocks(osb->sb, bit_off);
num_bits, flags, meta_ac);
if (status < 0) {
mlog_errno(status);
- goto leave;
+ need_free = 1;
+ goto bail;
}
ocfs2_journal_dirty(handle, et->et_root_bh);
reason = RESTART_TRANS;
}
+bail:
+ if (need_free) {
+ if (data_ac->ac_which == OCFS2_AC_USE_LOCAL)
+ ocfs2_free_local_alloc_bits(osb, handle, data_ac,
+ bit_off, num_bits);
+ else
+ ocfs2_free_clusters(handle,
+ data_ac->ac_inode,
+ data_ac->ac_bh,
+ ocfs2_clusters_to_blocks(osb->sb, bit_off),
+ num_bits);
+ }
+
leave:
if (reason_ret)
*reason_ret = reason;
struct buffer_head *di_bh)
{
int ret, i, has_data, num_pages = 0;
+ int need_free = 0;
+ u32 bit_off, num;
handle_t *handle;
u64 uninitialized_var(block);
struct ocfs2_inode_info *oi = OCFS2_I(inode);
}
if (has_data) {
- u32 bit_off, num;
unsigned int page_end;
u64 phys;
ret = ocfs2_grab_eof_pages(inode, 0, end, pages, &num_pages);
if (ret) {
mlog_errno(ret);
+ need_free = 1;
goto out_commit;
}
ret = ocfs2_read_inline_data(inode, pages[0], di_bh);
if (ret) {
mlog_errno(ret);
+ need_free = 1;
goto out_commit;
}
ret = ocfs2_insert_extent(handle, &et, 0, block, 1, 0, NULL);
if (ret) {
mlog_errno(ret);
+ need_free = 1;
goto out_commit;
}
dquot_free_space_nodirty(inode,
ocfs2_clusters_to_bytes(osb->sb, 1));
+ if (need_free) {
+ if (data_ac->ac_which == OCFS2_AC_USE_LOCAL)
+ ocfs2_free_local_alloc_bits(osb, handle, data_ac,
+ bit_off, num);
+ else
+ ocfs2_free_clusters(handle,
+ data_ac->ac_inode,
+ data_ac->ac_bh,
+ ocfs2_clusters_to_blocks(osb->sb, bit_off),
+ num);
+ }
+
ocfs2_commit_trans(osb, handle);
out_unlock:
if (end > i_size_read(inode))
end = i_size_read(inode);
- BUG_ON(start >= end);
+ BUG_ON(start > end);
if (!(OCFS2_I(inode)->ip_dyn_features & OCFS2_INLINE_DATA_FL) ||
!(le16_to_cpu(di->i_dyn_features) & OCFS2_INLINE_DATA_FL) ||
file->f_path.dentry->d_name.name,
(unsigned long long)datasync);
+ if (ocfs2_is_hard_readonly(osb) || ocfs2_is_soft_readonly(osb))
+ return -EROFS;
+
err = filemap_write_and_wait_range(inode->i_mapping, start, end);
if (err)
return err;
goto bail;
}
- /* lets handle the simple truncate cases before doing any more
- * cluster locking. */
- if (new_i_size == le64_to_cpu(fe->i_size))
- goto bail;
-
down_write(&OCFS2_I(inode)->ip_alloc_sem);
ocfs2_resv_discard(&osb->osb_la_resmap,
* While a write will already be ordering the data, a truncate will not.
* Thus, we need to explicitly order the zeroed pages.
*/
-static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode)
+static handle_t *ocfs2_zero_start_ordered_transaction(struct inode *inode,
+ struct buffer_head *di_bh)
{
struct ocfs2_super *osb = OCFS2_SB(inode->i_sb);
handle_t *handle = NULL;
}
ret = ocfs2_jbd2_file_inode(handle, inode);
- if (ret < 0)
+ if (ret < 0) {
+ mlog_errno(ret);
+ goto out;
+ }
+
+ ret = ocfs2_journal_access_di(handle, INODE_CACHE(inode), di_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (ret)
mlog_errno(ret);
out:
* to be too fragile to do exactly what we need without us having to
* worry about recursive locking in ->write_begin() and ->write_end(). */
static int ocfs2_write_zero_page(struct inode *inode, u64 abs_from,
- u64 abs_to)
+ u64 abs_to, struct buffer_head *di_bh)
{
struct address_space *mapping = inode->i_mapping;
struct page *page;
handle_t *handle = NULL;
int ret = 0;
unsigned zero_from, zero_to, block_start, block_end;
+ struct ocfs2_dinode *di = (struct ocfs2_dinode *)di_bh->b_data;
BUG_ON(abs_from >= abs_to);
BUG_ON(abs_to > (((u64)index + 1) << PAGE_CACHE_SHIFT));
}
if (!handle) {
- handle = ocfs2_zero_start_ordered_transaction(inode);
+ handle = ocfs2_zero_start_ordered_transaction(inode,
+ di_bh);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
handle = NULL;
ret = 0;
}
- if (handle)
+ if (handle) {
+ /*
+ * fs-writeback will release the dirty pages without page lock
+ * whose offset are over inode size, the release happens at
+ * block_write_full_page_endio().
+ */
+ i_size_write(inode, abs_to);
+ inode->i_blocks = ocfs2_inode_sector_count(inode);
+ di->i_size = cpu_to_le64((u64)i_size_read(inode));
+ inode->i_mtime = inode->i_ctime = CURRENT_TIME;
+ di->i_mtime = di->i_ctime = cpu_to_le64(inode->i_mtime.tv_sec);
+ di->i_ctime_nsec = cpu_to_le32(inode->i_mtime.tv_nsec);
+ di->i_mtime_nsec = di->i_ctime_nsec;
+ ocfs2_journal_dirty(handle, di_bh);
ocfs2_commit_trans(OCFS2_SB(inode->i_sb), handle);
+ }
out_unlock:
unlock_page(page);
* has made sure that the entire range needs zeroing.
*/
static int ocfs2_zero_extend_range(struct inode *inode, u64 range_start,
- u64 range_end)
+ u64 range_end, struct buffer_head *di_bh)
{
int rc = 0;
u64 next_pos;
next_pos = (zero_pos & PAGE_CACHE_MASK) + PAGE_CACHE_SIZE;
if (next_pos > range_end)
next_pos = range_end;
- rc = ocfs2_write_zero_page(inode, zero_pos, next_pos);
+ rc = ocfs2_write_zero_page(inode, zero_pos, next_pos, di_bh);
if (rc < 0) {
mlog_errno(rc);
break;
range_end = zero_to_size;
ret = ocfs2_zero_extend_range(inode, range_start,
- range_end);
+ range_end, di_bh);
if (ret) {
mlog_errno(ret);
break;
goto bail_unlock_rw;
}
- if (size_change && attr->ia_size != i_size_read(inode)) {
+ if (size_change) {
status = inode_newsize_ok(inode, attr->ia_size);
if (status)
goto bail_unlock;
inode_dio_wait(inode);
- if (i_size_read(inode) > attr->ia_size) {
+ if (i_size_read(inode) >= attr->ia_size) {
if (ocfs2_should_order_data(inode)) {
status = ocfs2_begin_ordered_truncate(inode,
attr->ia_size);
return status;
}
+int ocfs2_free_local_alloc_bits(struct ocfs2_super *osb,
+ handle_t *handle,
+ struct ocfs2_alloc_context *ac,
+ u32 bit_off,
+ u32 num_bits)
+{
+ int status, start;
+ u32 clear_bits;
+ struct inode *local_alloc_inode;
+ void *bitmap;
+ struct ocfs2_dinode *alloc;
+ struct ocfs2_local_alloc *la;
+
+ BUG_ON(ac->ac_which != OCFS2_AC_USE_LOCAL);
+
+ local_alloc_inode = ac->ac_inode;
+ alloc = (struct ocfs2_dinode *) osb->local_alloc_bh->b_data;
+ la = OCFS2_LOCAL_ALLOC(alloc);
+
+ bitmap = la->la_bitmap;
+ start = bit_off - le32_to_cpu(la->la_bm_off);
+ clear_bits = num_bits;
+
+ status = ocfs2_journal_access_di(handle,
+ INODE_CACHE(local_alloc_inode),
+ osb->local_alloc_bh,
+ OCFS2_JOURNAL_ACCESS_WRITE);
+ if (status < 0) {
+ mlog_errno(status);
+ goto bail;
+ }
+
+ while (clear_bits--)
+ ocfs2_clear_bit(start++, bitmap);
+
+ le32_add_cpu(&alloc->id1.bitmap1.i_used, -num_bits);
+ ocfs2_journal_dirty(handle, osb->local_alloc_bh);
+
+bail:
+ return status;
+}
+
static u32 ocfs2_local_alloc_count_bits(struct ocfs2_dinode *alloc)
{
u32 count;
u32 *bit_off,
u32 *num_bits);
+int ocfs2_free_local_alloc_bits(struct ocfs2_super *osb,
+ handle_t *handle,
+ struct ocfs2_alloc_context *ac,
+ u32 bit_off,
+ u32 num_bits);
+
void ocfs2_local_alloc_seen_free_bits(struct ocfs2_super *osb,
unsigned int num_clusters);
void ocfs2_la_enable_worker(struct work_struct *work);
struct ocfs2_super *osb = OCFS2_SB(dir->i_sb);
struct ocfs2_dir_lookup_result lookup = { NULL, };
sigset_t oldset;
+ u64 old_de_ino;
trace_ocfs2_link((unsigned long long)OCFS2_I(inode)->ip_blkno,
old_dentry->d_name.len, old_dentry->d_name.name,
goto out;
}
+ err = ocfs2_lookup_ino_from_name(dir, old_dentry->d_name.name,
+ old_dentry->d_name.len, &old_de_ino);
+ if (err) {
+ err = -ENOENT;
+ goto out;
+ }
+
+ /*
+ * Check whether another node removed the source inode while we
+ * were in the vfs.
+ */
+ if (old_de_ino != OCFS2_I(inode)->ip_blkno) {
+ err = -ENOENT;
+ goto out;
+ }
+
err = ocfs2_check_dir_for_entry(dir, dentry->d_name.name,
dentry->d_name.len);
if (err)
return -EOPNOTSUPP;
acl = get_acl(inode, ACL_TYPE_ACCESS);
- if (IS_ERR_OR_NULL(acl))
+ if (IS_ERR_OR_NULL(acl)) {
+ if (acl == ERR_PTR(-EOPNOTSUPP))
+ return 0;
return PTR_ERR(acl);
+ }
ret = __posix_acl_chmod(&acl, GFP_KERNEL, mode);
if (ret)
goto no_acl;
p = get_acl(dir, ACL_TYPE_DEFAULT);
- if (IS_ERR(p))
+ if (IS_ERR(p)) {
+ if (p == ERR_PTR(-EOPNOTSUPP))
+ goto apply_umask;
return PTR_ERR(p);
-
- if (!p) {
- *mode &= ~current_umask();
- goto no_acl;
}
+ if (!p)
+ goto apply_umask;
+
*acl = posix_acl_clone(p, GFP_NOFS);
if (!*acl)
return -ENOMEM;
}
return 0;
+apply_umask:
+ *mode &= ~current_umask();
no_acl:
*default_acl = NULL;
*acl = NULL;
return rc;
}
nhdr_ptr = notes_section;
- while (real_sz < max_sz) {
- if (nhdr_ptr->n_namesz == 0)
- break;
+ while (nhdr_ptr->n_namesz != 0) {
sz = sizeof(Elf64_Nhdr) +
((nhdr_ptr->n_namesz + 3) & ~3) +
((nhdr_ptr->n_descsz + 3) & ~3);
+ if ((real_sz + sz) > max_sz) {
+ pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",
+ nhdr_ptr->n_namesz, nhdr_ptr->n_descsz);
+ break;
+ }
real_sz += sz;
nhdr_ptr = (Elf64_Nhdr*)((char*)nhdr_ptr + sz);
}
kfree(notes_section);
phdr_ptr->p_memsz = real_sz;
+ if (real_sz == 0) {
+ pr_warn("Warning: Zero PT_NOTE entries found\n");
+ return -EINVAL;
+ }
}
return 0;
return rc;
}
nhdr_ptr = notes_section;
- while (real_sz < max_sz) {
- if (nhdr_ptr->n_namesz == 0)
- break;
+ while (nhdr_ptr->n_namesz != 0) {
sz = sizeof(Elf32_Nhdr) +
((nhdr_ptr->n_namesz + 3) & ~3) +
((nhdr_ptr->n_descsz + 3) & ~3);
+ if ((real_sz + sz) > max_sz) {
+ pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",
+ nhdr_ptr->n_namesz, nhdr_ptr->n_descsz);
+ break;
+ }
real_sz += sz;
nhdr_ptr = (Elf32_Nhdr*)((char*)nhdr_ptr + sz);
}
kfree(notes_section);
phdr_ptr->p_memsz = real_sz;
+ if (real_sz == 0) {
+ pr_warn("Warning: Zero PT_NOTE entries found\n");
+ return -EINVAL;
+ }
}
return 0;
switch (flag) {
case M_INSERT: /* insert item into L[0] */
- if (item_pos == tb->lnum[0] - 1
- && tb->lbytes != -1) {
+ if (item_pos == tb->lnum[0] - 1 && tb->lbytes != -1) {
/* part of new item falls into L[0] */
int new_item_len;
int version;
- ret_val =
- leaf_shift_left(tb, tb->lnum[0] - 1,
- -1);
+ ret_val = leaf_shift_left(tb, tb->lnum[0] - 1, -1);
/* Calculate item length to insert to S[0] */
- new_item_len =
- ih_item_len(ih) - tb->lbytes;
+ new_item_len = ih_item_len(ih) - tb->lbytes;
/* Calculate and check item length to insert to L[0] */
- put_ih_item_len(ih,
- ih_item_len(ih) -
- new_item_len);
+ put_ih_item_len(ih, ih_item_len(ih) - new_item_len);
RFALSE(ih_item_len(ih) <= 0,
"PAP-12080: there is nothing to insert into L[0]: ih_item_len=%d",
/* Insert new item into L[0] */
buffer_info_init_left(tb, &bi);
leaf_insert_into_buf(&bi,
- n + item_pos -
- ret_val, ih, body,
- zeros_num >
- ih_item_len(ih) ?
- ih_item_len(ih) :
- zeros_num);
+ n + item_pos - ret_val, ih, body,
+ zeros_num > ih_item_len(ih) ? ih_item_len(ih) : zeros_num);
version = ih_version(ih);
/* Calculate key component, item length and body to insert into S[0] */
- set_le_ih_k_offset(ih,
- le_ih_k_offset(ih) +
- (tb->
- lbytes <<
- (is_indirect_le_ih
- (ih) ? tb->tb_sb->
- s_blocksize_bits -
- UNFM_P_SHIFT :
- 0)));
+ set_le_ih_k_offset(ih, le_ih_k_offset(ih) +
+ (tb-> lbytes << (is_indirect_le_ih(ih) ? tb->tb_sb-> s_blocksize_bits - UNFM_P_SHIFT : 0)));
put_ih_item_len(ih, new_item_len);
if (tb->lbytes > zeros_num) {
- body +=
- (tb->lbytes - zeros_num);
+ body += (tb->lbytes - zeros_num);
zeros_num = 0;
} else
zeros_num -= tb->lbytes;
} else {
/* new item in whole falls into L[0] */
/* Shift lnum[0]-1 items to L[0] */
- ret_val =
- leaf_shift_left(tb, tb->lnum[0] - 1,
- tb->lbytes);
+ ret_val = leaf_shift_left(tb, tb->lnum[0] - 1, tb->lbytes);
/* Insert new item into L[0] */
buffer_info_init_left(tb, &bi);
- leaf_insert_into_buf(&bi,
- n + item_pos -
- ret_val, ih, body,
- zeros_num);
+ leaf_insert_into_buf(&bi, n + item_pos - ret_val, ih, body, zeros_num);
tb->insert_size[0] = 0;
zeros_num = 0;
}
case M_PASTE: /* append item in L[0] */
- if (item_pos == tb->lnum[0] - 1
- && tb->lbytes != -1) {
+ if (item_pos == tb->lnum[0] - 1 && tb->lbytes != -1) {
/* we must shift the part of the appended item */
- if (is_direntry_le_ih
- (B_N_PITEM_HEAD(tbS0, item_pos))) {
+ if (is_direntry_le_ih(B_N_PITEM_HEAD(tbS0, item_pos))) {
RFALSE(zeros_num,
"PAP-12090: invalid parameter in case of a directory");
/* directory item */
if (tb->lbytes > pos_in_item) {
/* new directory entry falls into L[0] */
- struct item_head
- *pasted;
- int l_pos_in_item =
- pos_in_item;
+ struct item_head *pasted;
+ int l_pos_in_item = pos_in_item;
/* Shift lnum[0] - 1 items in whole. Shift lbytes - 1 entries from given directory item */
- ret_val =
- leaf_shift_left(tb,
- tb->
- lnum
- [0],
- tb->
- lbytes
- -
- 1);
- if (ret_val
- && !item_pos) {
- pasted =
- B_N_PITEM_HEAD
- (tb->L[0],
- B_NR_ITEMS
- (tb->
- L[0]) -
- 1);
- l_pos_in_item +=
- I_ENTRY_COUNT
- (pasted) -
- (tb->
- lbytes -
- 1);
+ ret_val = leaf_shift_left(tb, tb->lnum[0], tb->lbytes-1);
+ if (ret_val && !item_pos) {
+ pasted = B_N_PITEM_HEAD(tb->L[0], B_NR_ITEMS(tb->L[0]) - 1);
+ l_pos_in_item += I_ENTRY_COUNT(pasted) - (tb->lbytes -1);
}
/* Append given directory entry to directory item */
buffer_info_init_left(tb, &bi);
- leaf_paste_in_buffer
- (&bi,
- n + item_pos -
- ret_val,
- l_pos_in_item,
- tb->insert_size[0],
- body, zeros_num);
+ leaf_paste_in_buffer(&bi, n + item_pos - ret_val, l_pos_in_item, tb->insert_size[0], body, zeros_num);
/* previous string prepared space for pasting new entry, following string pastes this entry */
/* when we have merge directory item, pos_in_item has been changed too */
/* paste new directory entry. 1 is entry number */
- leaf_paste_entries(&bi,
- n +
- item_pos
- -
- ret_val,
- l_pos_in_item,
- 1,
- (struct
- reiserfs_de_head
- *)
- body,
- body
- +
- DEH_SIZE,
- tb->
- insert_size
- [0]
- );
+ leaf_paste_entries(&bi, n + item_pos - ret_val, l_pos_in_item,
+ 1, (struct reiserfs_de_head *) body,
+ body + DEH_SIZE, tb->insert_size[0]);
tb->insert_size[0] = 0;
} else {
/* new directory item doesn't fall into L[0] */
/* Shift lnum[0]-1 items in whole. Shift lbytes directory entries from directory item number lnum[0] */
- leaf_shift_left(tb,
- tb->
- lnum[0],
- tb->
- lbytes);
+ leaf_shift_left(tb, tb->lnum[0], tb->lbytes);
}
/* Calculate new position to append in item body */
pos_in_item -= tb->lbytes;
} else {
/* regular object */
- RFALSE(tb->lbytes <= 0,
- "PAP-12095: there is nothing to shift to L[0]. lbytes=%d",
- tb->lbytes);
- RFALSE(pos_in_item !=
- ih_item_len
- (B_N_PITEM_HEAD
- (tbS0, item_pos)),
+ RFALSE(tb->lbytes <= 0, "PAP-12095: there is nothing to shift to L[0]. lbytes=%d", tb->lbytes);
+ RFALSE(pos_in_item != ih_item_len(B_N_PITEM_HEAD(tbS0, item_pos)),
"PAP-12100: incorrect position to paste: item_len=%d, pos_in_item=%d",
- ih_item_len
- (B_N_PITEM_HEAD
- (tbS0, item_pos)),
- pos_in_item);
+ ih_item_len(B_N_PITEM_HEAD(tbS0, item_pos)),pos_in_item);
if (tb->lbytes >= pos_in_item) {
/* appended item will be in L[0] in whole */
int l_n;
/* this bytes number must be appended to the last item of L[h] */
- l_n =
- tb->lbytes -
- pos_in_item;
+ l_n = tb->lbytes - pos_in_item;
/* Calculate new insert_size[0] */
- tb->insert_size[0] -=
- l_n;
+ tb->insert_size[0] -= l_n;
- RFALSE(tb->
- insert_size[0] <=
- 0,
+ RFALSE(tb->insert_size[0] <= 0,
"PAP-12105: there is nothing to paste into L[0]. insert_size=%d",
- tb->
- insert_size[0]);
- ret_val =
- leaf_shift_left(tb,
- tb->
- lnum
- [0],
- ih_item_len
- (B_N_PITEM_HEAD
- (tbS0,
- item_pos)));
+ tb->insert_size[0]);
+ ret_val = leaf_shift_left(tb, tb->lnum[0], ih_item_len
+ (B_N_PITEM_HEAD(tbS0, item_pos)));
/* Append to body of item in L[0] */
buffer_info_init_left(tb, &bi);
leaf_paste_in_buffer
- (&bi,
- n + item_pos -
- ret_val,
- ih_item_len
- (B_N_PITEM_HEAD
- (tb->L[0],
- n + item_pos -
- ret_val)), l_n,
- body,
- zeros_num >
- l_n ? l_n :
- zeros_num);
+ (&bi, n + item_pos - ret_val, ih_item_len
+ (B_N_PITEM_HEAD(tb->L[0], n + item_pos - ret_val)),
+ l_n, body,
+ zeros_num > l_n ? l_n : zeros_num);
/* 0-th item in S0 can be only of DIRECT type when l_n != 0 */
{
int version;
- int temp_l =
- l_n;
-
- RFALSE
- (ih_item_len
- (B_N_PITEM_HEAD
- (tbS0,
- 0)),
+ int temp_l = l_n;
+
+ RFALSE(ih_item_len(B_N_PITEM_HEAD(tbS0, 0)),
"PAP-12106: item length must be 0");
- RFALSE
- (comp_short_le_keys
- (B_N_PKEY
- (tbS0, 0),
- B_N_PKEY
- (tb->L[0],
- n +
- item_pos
- -
- ret_val)),
+ RFALSE(comp_short_le_keys(B_N_PKEY(tbS0, 0), B_N_PKEY
+ (tb->L[0], n + item_pos - ret_val)),
"PAP-12107: items must be of the same file");
if (is_indirect_le_ih(B_N_PITEM_HEAD(tb->L[0], n + item_pos - ret_val))) {
- temp_l =
- l_n
- <<
- (tb->
- tb_sb->
- s_blocksize_bits
- -
- UNFM_P_SHIFT);
+ temp_l = l_n << (tb->tb_sb-> s_blocksize_bits - UNFM_P_SHIFT);
}
/* update key of first item in S0 */
- version =
- ih_version
- (B_N_PITEM_HEAD
- (tbS0, 0));
- set_le_key_k_offset
- (version,
- B_N_PKEY
- (tbS0, 0),
- le_key_k_offset
- (version,
- B_N_PKEY
- (tbS0,
- 0)) +
- temp_l);
+ version = ih_version(B_N_PITEM_HEAD(tbS0, 0));
+ set_le_key_k_offset(version, B_N_PKEY(tbS0, 0),
+ le_key_k_offset(version,B_N_PKEY(tbS0, 0)) + temp_l);
/* update left delimiting key */
- set_le_key_k_offset
- (version,
- B_N_PDELIM_KEY
- (tb->
- CFL[0],
- tb->
- lkey[0]),
- le_key_k_offset
- (version,
- B_N_PDELIM_KEY
- (tb->
- CFL[0],
- tb->
- lkey[0]))
- + temp_l);
+ set_le_key_k_offset(version, B_N_PDELIM_KEY(tb->CFL[0], tb->lkey[0]),
+ le_key_k_offset(version, B_N_PDELIM_KEY(tb->CFL[0], tb->lkey[0])) + temp_l);
}
/* Calculate new body, position in item and insert_size[0] */
if (l_n > zeros_num) {
- body +=
- (l_n -
- zeros_num);
+ body += (l_n - zeros_num);
zeros_num = 0;
} else
- zeros_num -=
- l_n;
+ zeros_num -= l_n;
pos_in_item = 0;
- RFALSE
- (comp_short_le_keys
- (B_N_PKEY(tbS0, 0),
- B_N_PKEY(tb->L[0],
- B_NR_ITEMS
- (tb->
- L[0]) -
- 1))
- ||
- !op_is_left_mergeable
- (B_N_PKEY(tbS0, 0),
- tbS0->b_size)
- ||
- !op_is_left_mergeable
- (B_N_PDELIM_KEY
- (tb->CFL[0],
- tb->lkey[0]),
- tbS0->b_size),
+ RFALSE(comp_short_le_keys(B_N_PKEY(tbS0, 0), B_N_PKEY(tb->L[0], B_NR_ITEMS(tb->L[0]) - 1))
+ || !op_is_left_mergeable(B_N_PKEY(tbS0, 0), tbS0->b_size)
+ || !op_is_left_mergeable(B_N_PDELIM_KEY(tb->CFL[0], tb->lkey[0]), tbS0->b_size),
"PAP-12120: item must be merge-able with left neighboring item");
} else { /* only part of the appended item will be in L[0] */
/* Calculate position in item for append in S[0] */
- pos_in_item -=
- tb->lbytes;
+ pos_in_item -= tb->lbytes;
- RFALSE(pos_in_item <= 0,
- "PAP-12125: no place for paste. pos_in_item=%d",
- pos_in_item);
+ RFALSE(pos_in_item <= 0, "PAP-12125: no place for paste. pos_in_item=%d", pos_in_item);
/* Shift lnum[0] - 1 items in whole. Shift lbytes - 1 byte from item number lnum[0] */
- leaf_shift_left(tb,
- tb->
- lnum[0],
- tb->
- lbytes);
+ leaf_shift_left(tb, tb->lnum[0], tb->lbytes);
}
}
} else { /* appended item will be in L[0] in whole */
if (!item_pos && op_is_left_mergeable(B_N_PKEY(tbS0, 0), tbS0->b_size)) { /* if we paste into first item of S[0] and it is left mergable */
/* then increment pos_in_item by the size of the last item in L[0] */
- pasted =
- B_N_PITEM_HEAD(tb->L[0],
- n - 1);
+ pasted = B_N_PITEM_HEAD(tb->L[0], n - 1);
if (is_direntry_le_ih(pasted))
- pos_in_item +=
- ih_entry_count
- (pasted);
+ pos_in_item += ih_entry_count(pasted);
else
- pos_in_item +=
- ih_item_len(pasted);
+ pos_in_item += ih_item_len(pasted);
}
/* Shift lnum[0] - 1 items in whole. Shift lbytes - 1 byte from item number lnum[0] */
- ret_val =
- leaf_shift_left(tb, tb->lnum[0],
- tb->lbytes);
+ ret_val = leaf_shift_left(tb, tb->lnum[0], tb->lbytes);
/* Append to body of item in L[0] */
buffer_info_init_left(tb, &bi);
- leaf_paste_in_buffer(&bi,
- n + item_pos -
- ret_val,
+ leaf_paste_in_buffer(&bi, n + item_pos - ret_val,
pos_in_item,
tb->insert_size[0],
body, zeros_num);
/* if appended item is directory, paste entry */
- pasted =
- B_N_PITEM_HEAD(tb->L[0],
- n + item_pos -
- ret_val);
+ pasted = B_N_PITEM_HEAD(tb->L[0], n + item_pos - ret_val);
if (is_direntry_le_ih(pasted))
- leaf_paste_entries(&bi,
- n +
- item_pos -
- ret_val,
- pos_in_item,
- 1,
- (struct
- reiserfs_de_head
- *)body,
- body +
- DEH_SIZE,
- tb->
- insert_size
- [0]
- );
+ leaf_paste_entries(&bi, n + item_pos - ret_val,
+ pos_in_item, 1,
+ (struct reiserfs_de_head *) body,
+ body + DEH_SIZE,
+ tb->insert_size[0]);
/* if appended item is indirect item, put unformatted node into un list */
if (is_indirect_le_ih(pasted))
set_ih_free_space(pasted, 0);
reiserfs_panic(tb->tb_sb, "PAP-12130",
"lnum > 0: unexpected mode: "
" %s(%d)",
- (flag ==
- M_DELETE) ? "DELETE" : ((flag ==
- M_CUT)
- ? "CUT"
- :
- "UNKNOWN"),
- flag);
+ (flag == M_DELETE) ? "DELETE" : ((flag == M_CUT) ? "CUT" : "UNKNOWN"), flag);
}
} else {
/* new item doesn't fall into L[0] */
case M_INSERT: /* insert item */
if (n - tb->rnum[0] < item_pos) { /* new item or its part falls to R[0] */
if (item_pos == n - tb->rnum[0] + 1 && tb->rbytes != -1) { /* part of new item falls into R[0] */
- loff_t old_key_comp, old_len,
- r_zeros_number;
+ loff_t old_key_comp, old_len, r_zeros_number;
const char *r_body;
int version;
loff_t offset;
- leaf_shift_right(tb, tb->rnum[0] - 1,
- -1);
+ leaf_shift_right(tb, tb->rnum[0] - 1, -1);
version = ih_version(ih);
/* Remember key component and item length */
old_len = ih_item_len(ih);
/* Calculate key component and item length to insert into R[0] */
- offset =
- le_ih_k_offset(ih) +
- ((old_len -
- tb->
- rbytes) << (is_indirect_le_ih(ih)
- ? tb->tb_sb->
- s_blocksize_bits -
- UNFM_P_SHIFT : 0));
+ offset = le_ih_k_offset(ih) + ((old_len - tb->rbytes) << (is_indirect_le_ih(ih) ? tb->tb_sb->s_blocksize_bits - UNFM_P_SHIFT : 0));
set_le_ih_k_offset(ih, offset);
put_ih_item_len(ih, tb->rbytes);
/* Insert part of the item into R[0] */
buffer_info_init_right(tb, &bi);
if ((old_len - tb->rbytes) > zeros_num) {
r_zeros_number = 0;
- r_body =
- body + (old_len -
- tb->rbytes) -
- zeros_num;
+ r_body = body + (old_len - tb->rbytes) - zeros_num;
} else {
r_body = body;
- r_zeros_number =
- zeros_num - (old_len -
- tb->rbytes);
+ r_zeros_number = zeros_num - (old_len - tb->rbytes);
zeros_num -= r_zeros_number;
}
/* Calculate key component and item length to insert into S[0] */
set_le_ih_k_offset(ih, old_key_comp);
- put_ih_item_len(ih,
- old_len - tb->rbytes);
+ put_ih_item_len(ih, old_len - tb->rbytes);
tb->insert_size[0] -= tb->rbytes;
} else { /* whole new item falls into R[0] */
/* Shift rnum[0]-1 items to R[0] */
- ret_val =
- leaf_shift_right(tb,
- tb->rnum[0] - 1,
- tb->rbytes);
+ ret_val = leaf_shift_right(tb, tb->rnum[0] - 1, tb->rbytes);
/* Insert new item into R[0] */
buffer_info_init_right(tb, &bi);
- leaf_insert_into_buf(&bi,
- item_pos - n +
- tb->rnum[0] - 1,
- ih, body,
- zeros_num);
+ leaf_insert_into_buf(&bi, item_pos - n + tb->rnum[0] - 1,
+ ih, body, zeros_num);
if (item_pos - n + tb->rnum[0] - 1 == 0) {
replace_key(tb, tb->CFR[0],
RFALSE(zeros_num,
"PAP-12145: invalid parameter in case of a directory");
- entry_count =
- I_ENTRY_COUNT(B_N_PITEM_HEAD
- (tbS0,
- item_pos));
+ entry_count = I_ENTRY_COUNT(B_N_PITEM_HEAD
+ (tbS0, item_pos));
if (entry_count - tb->rbytes <
pos_in_item)
/* new directory entry falls into R[0] */
{
int paste_entry_position;
- RFALSE(tb->rbytes - 1 >=
- entry_count
- || !tb->
- insert_size[0],
+ RFALSE(tb->rbytes - 1 >= entry_count || !tb-> insert_size[0],
"PAP-12150: no enough of entries to shift to R[0]: rbytes=%d, entry_count=%d",
- tb->rbytes,
- entry_count);
+ tb->rbytes, entry_count);
/* Shift rnum[0]-1 items in whole. Shift rbytes-1 directory entries from directory item number rnum[0] */
- leaf_shift_right(tb,
- tb->
- rnum
- [0],
- tb->
- rbytes
- - 1);
+ leaf_shift_right(tb, tb->rnum[0], tb->rbytes - 1);
/* Paste given directory entry to directory item */
- paste_entry_position =
- pos_in_item -
- entry_count +
- tb->rbytes - 1;
+ paste_entry_position = pos_in_item - entry_count + tb->rbytes - 1;
buffer_info_init_right(tb, &bi);
- leaf_paste_in_buffer
- (&bi, 0,
- paste_entry_position,
- tb->insert_size[0],
- body, zeros_num);
+ leaf_paste_in_buffer(&bi, 0, paste_entry_position, tb->insert_size[0], body, zeros_num);
/* paste entry */
- leaf_paste_entries(&bi,
- 0,
- paste_entry_position,
- 1,
- (struct
- reiserfs_de_head
- *)
- body,
- body
- +
- DEH_SIZE,
- tb->
- insert_size
- [0]
- );
-
- if (paste_entry_position
- == 0) {
+ leaf_paste_entries(&bi, 0, paste_entry_position, 1,
+ (struct reiserfs_de_head *) body,
+ body + DEH_SIZE, tb->insert_size[0]);
+
+ if (paste_entry_position == 0) {
/* change delimiting keys */
- replace_key(tb,
- tb->
- CFR
- [0],
- tb->
- rkey
- [0],
- tb->
- R
- [0],
- 0);
+ replace_key(tb, tb->CFR[0], tb->rkey[0], tb->R[0],0);
}
tb->insert_size[0] = 0;
pos_in_item++;
} else { /* new directory entry doesn't fall into R[0] */
- leaf_shift_right(tb,
- tb->
- rnum
- [0],
- tb->
- rbytes);
+ leaf_shift_right(tb, tb->rnum[0], tb->rbytes);
}
} else { /* regular object */
- int n_shift, n_rem,
- r_zeros_number;
+ int n_shift, n_rem, r_zeros_number;
const char *r_body;
/* Calculate number of bytes which must be shifted from appended item */
- if ((n_shift =
- tb->rbytes -
- tb->insert_size[0]) < 0)
+ if ((n_shift = tb->rbytes - tb->insert_size[0]) < 0)
n_shift = 0;
- RFALSE(pos_in_item !=
- ih_item_len
- (B_N_PITEM_HEAD
- (tbS0, item_pos)),
+ RFALSE(pos_in_item != ih_item_len
+ (B_N_PITEM_HEAD(tbS0, item_pos)),
"PAP-12155: invalid position to paste. ih_item_len=%d, pos_in_item=%d",
- pos_in_item,
- ih_item_len
- (B_N_PITEM_HEAD
- (tbS0, item_pos)));
-
- leaf_shift_right(tb,
- tb->rnum[0],
- n_shift);
+ pos_in_item, ih_item_len
+ (B_N_PITEM_HEAD(tbS0, item_pos)));
+
+ leaf_shift_right(tb, tb->rnum[0], n_shift);
/* Calculate number of bytes which must remain in body after appending to R[0] */
- if ((n_rem =
- tb->insert_size[0] -
- tb->rbytes) < 0)
+ if ((n_rem = tb->insert_size[0] - tb->rbytes) < 0)
n_rem = 0;
{
int version;
- unsigned long temp_rem =
- n_rem;
-
- version =
- ih_version
- (B_N_PITEM_HEAD
- (tb->R[0], 0));
- if (is_indirect_le_key
- (version,
- B_N_PKEY(tb->R[0],
- 0))) {
- temp_rem =
- n_rem <<
- (tb->tb_sb->
- s_blocksize_bits
- -
- UNFM_P_SHIFT);
+ unsigned long temp_rem = n_rem;
+
+ version = ih_version(B_N_PITEM_HEAD(tb->R[0], 0));
+ if (is_indirect_le_key(version, B_N_PKEY(tb->R[0], 0))) {
+ temp_rem = n_rem << (tb->tb_sb->s_blocksize_bits - UNFM_P_SHIFT);
}
- set_le_key_k_offset
- (version,
- B_N_PKEY(tb->R[0],
- 0),
- le_key_k_offset
- (version,
- B_N_PKEY(tb->R[0],
- 0)) +
- temp_rem);
- set_le_key_k_offset
- (version,
- B_N_PDELIM_KEY(tb->
- CFR
- [0],
- tb->
- rkey
- [0]),
- le_key_k_offset
- (version,
- B_N_PDELIM_KEY
- (tb->CFR[0],
- tb->rkey[0])) +
- temp_rem);
+ set_le_key_k_offset(version, B_N_PKEY(tb->R[0], 0),
+ le_key_k_offset(version, B_N_PKEY(tb->R[0], 0)) + temp_rem);
+ set_le_key_k_offset(version, B_N_PDELIM_KEY(tb->CFR[0], tb->rkey[0]),
+ le_key_k_offset(version, B_N_PDELIM_KEY(tb->CFR[0], tb->rkey[0])) + temp_rem);
}
/* k_offset (B_N_PKEY(tb->R[0],0)) += n_rem;
k_offset (B_N_PDELIM_KEY(tb->CFR[0],tb->rkey[0])) += n_rem;*/
- do_balance_mark_internal_dirty
- (tb, tb->CFR[0], 0);
+ do_balance_mark_internal_dirty(tb, tb->CFR[0], 0);
/* Append part of body into R[0] */
buffer_info_init_right(tb, &bi);
if (n_rem > zeros_num) {
r_zeros_number = 0;
- r_body =
- body + n_rem -
- zeros_num;
+ r_body = body + n_rem - zeros_num;
} else {
r_body = body;
- r_zeros_number =
- zeros_num - n_rem;
- zeros_num -=
- r_zeros_number;
+ r_zeros_number = zeros_num - n_rem;
+ zeros_num -= r_zeros_number;
}
- leaf_paste_in_buffer(&bi, 0,
- n_shift,
- tb->
- insert_size
- [0] -
- n_rem,
- r_body,
- r_zeros_number);
-
- if (is_indirect_le_ih
- (B_N_PITEM_HEAD
- (tb->R[0], 0))) {
+ leaf_paste_in_buffer(&bi, 0, n_shift,
+ tb->insert_size[0] - n_rem,
+ r_body, r_zeros_number);
+
+ if (is_indirect_le_ih(B_N_PITEM_HEAD(tb->R[0], 0))) {
#if 0
RFALSE(n_rem,
"PAP-12160: paste more than one unformatted node pointer");
#endif
- set_ih_free_space
- (B_N_PITEM_HEAD
- (tb->R[0], 0), 0);
+ set_ih_free_space(B_N_PITEM_HEAD(tb->R[0], 0), 0);
}
tb->insert_size[0] = n_rem;
if (!n_rem)
struct item_head *pasted;
- ret_val =
- leaf_shift_right(tb, tb->rnum[0],
- tb->rbytes);
+ ret_val = leaf_shift_right(tb, tb->rnum[0], tb->rbytes);
/* append item in R[0] */
if (pos_in_item >= 0) {
buffer_info_init_right(tb, &bi);
- leaf_paste_in_buffer(&bi,
- item_pos -
- n +
- tb->
- rnum[0],
- pos_in_item,
- tb->
- insert_size
- [0], body,
- zeros_num);
+ leaf_paste_in_buffer(&bi, item_pos - n + tb->rnum[0], pos_in_item,
+ tb->insert_size[0], body, zeros_num);
}
/* paste new entry, if item is directory item */
- pasted =
- B_N_PITEM_HEAD(tb->R[0],
- item_pos - n +
- tb->rnum[0]);
- if (is_direntry_le_ih(pasted)
- && pos_in_item >= 0) {
- leaf_paste_entries(&bi,
- item_pos -
- n +
- tb->rnum[0],
- pos_in_item,
- 1,
- (struct
- reiserfs_de_head
- *)body,
- body +
- DEH_SIZE,
- tb->
- insert_size
- [0]
- );
+ pasted = B_N_PITEM_HEAD(tb->R[0], item_pos - n + tb->rnum[0]);
+ if (is_direntry_le_ih(pasted) && pos_in_item >= 0) {
+ leaf_paste_entries(&bi, item_pos - n + tb->rnum[0],
+ pos_in_item, 1,
+ (struct reiserfs_de_head *) body,
+ body + DEH_SIZE, tb->insert_size[0]);
if (!pos_in_item) {
- RFALSE(item_pos - n +
- tb->rnum[0],
+ RFALSE(item_pos - n + tb->rnum[0],
"PAP-12165: directory item must be first item of node when pasting is in 0th position");
/* update delimiting keys */
- replace_key(tb,
- tb->CFR[0],
- tb->rkey[0],
- tb->R[0],
- 0);
+ replace_key(tb, tb->CFR[0], tb->rkey[0], tb->R[0], 0);
}
}
default: /* cases d and t */
reiserfs_panic(tb->tb_sb, "PAP-12175",
"rnum > 0: unexpected mode: %s(%d)",
- (flag ==
- M_DELETE) ? "DELETE" : ((flag ==
- M_CUT) ? "CUT"
- : "UNKNOWN"),
- flag);
+ (flag == M_DELETE) ? "DELETE" : ((flag == M_CUT) ? "CUT" : "UNKNOWN"), flag);
}
}
/* tb->rnum[0] > 0 */
RFALSE(tb->blknum[0] > 3,
- "PAP-12180: blknum can not be %d. It must be <= 3",
- tb->blknum[0]);
+ "PAP-12180: blknum can not be %d. It must be <= 3", tb->blknum[0]);
RFALSE(tb->blknum[0] < 0,
- "PAP-12185: blknum can not be %d. It must be >= 0",
- tb->blknum[0]);
+ "PAP-12185: blknum can not be %d. It must be >= 0", tb->blknum[0]);
/* if while adding to a node we discover that it is possible to split
it in two, and merge the left part into the left neighbor and the
if (n - snum[i] < item_pos) { /* new item or it's part falls to first new node S_new[i] */
if (item_pos == n - snum[i] + 1 && sbytes[i] != -1) { /* part of new item falls into S_new[i] */
- int old_key_comp, old_len,
- r_zeros_number;
+ int old_key_comp, old_len, r_zeros_number;
const char *r_body;
int version;
old_len = ih_item_len(ih);
/* Calculate key component and item length to insert into S_new[i] */
- set_le_ih_k_offset(ih,
- le_ih_k_offset(ih) +
- ((old_len -
- sbytes[i]) <<
- (is_indirect_le_ih
- (ih) ? tb->tb_sb->
- s_blocksize_bits -
- UNFM_P_SHIFT :
- 0)));
+ set_le_ih_k_offset(ih, le_ih_k_offset(ih) +
+ ((old_len - sbytes[i]) << (is_indirect_le_ih(ih) ? tb->tb_sb-> s_blocksize_bits - UNFM_P_SHIFT : 0)));
put_ih_item_len(ih, sbytes[i]);
if ((old_len - sbytes[i]) > zeros_num) {
r_zeros_number = 0;
- r_body =
- body + (old_len -
- sbytes[i]) -
- zeros_num;
+ r_body = body + (old_len - sbytes[i]) - zeros_num;
} else {
r_body = body;
- r_zeros_number =
- zeros_num - (old_len -
- sbytes[i]);
+ r_zeros_number = zeros_num - (old_len - sbytes[i]);
zeros_num -= r_zeros_number;
}
- leaf_insert_into_buf(&bi, 0, ih, r_body,
- r_zeros_number);
+ leaf_insert_into_buf(&bi, 0, ih, r_body, r_zeros_number);
/* Calculate key component and item length to insert into S[i] */
set_le_ih_k_offset(ih, old_key_comp);
- put_ih_item_len(ih,
- old_len - sbytes[i]);
+ put_ih_item_len(ih, old_len - sbytes[i]);
tb->insert_size[0] -= sbytes[i];
} else { /* whole new item falls into S_new[i] */
/* Shift snum[0] - 1 items to S_new[i] (sbytes[i] of split item) */
leaf_move_items(LEAF_FROM_S_TO_SNEW, tb,
- snum[i] - 1, sbytes[i],
- S_new[i]);
+ snum[i] - 1, sbytes[i], S_new[i]);
/* Insert new item into S_new[i] */
buffer_info_init_bh(tb, &bi, S_new[i]);
- leaf_insert_into_buf(&bi,
- item_pos - n +
- snum[i] - 1, ih,
- body, zeros_num);
+ leaf_insert_into_buf(&bi, item_pos - n + snum[i] - 1,
+ ih, body, zeros_num);
zeros_num = tb->insert_size[0] = 0;
}
int entry_count;
- entry_count =
- ih_entry_count(aux_ih);
+ entry_count = ih_entry_count(aux_ih);
- if (entry_count - sbytes[i] <
- pos_in_item
- && pos_in_item <=
- entry_count) {
+ if (entry_count - sbytes[i] < pos_in_item && pos_in_item <= entry_count) {
/* new directory entry falls into S_new[i] */
- RFALSE(!tb->
- insert_size[0],
- "PAP-12215: insert_size is already 0");
- RFALSE(sbytes[i] - 1 >=
- entry_count,
+ RFALSE(!tb->insert_size[0], "PAP-12215: insert_size is already 0");
+ RFALSE(sbytes[i] - 1 >= entry_count,
"PAP-12220: there are no so much entries (%d), only %d",
- sbytes[i] - 1,
- entry_count);
+ sbytes[i] - 1, entry_count);
/* Shift snum[i]-1 items in whole. Shift sbytes[i] directory entries from directory item number snum[i] */
- leaf_move_items
- (LEAF_FROM_S_TO_SNEW,
- tb, snum[i],
- sbytes[i] - 1,
- S_new[i]);
+ leaf_move_items(LEAF_FROM_S_TO_SNEW, tb, snum[i], sbytes[i] - 1, S_new[i]);
/* Paste given directory entry to directory item */
buffer_info_init_bh(tb, &bi, S_new[i]);
- leaf_paste_in_buffer
- (&bi, 0,
- pos_in_item -
- entry_count +
- sbytes[i] - 1,
- tb->insert_size[0],
- body, zeros_num);
+ leaf_paste_in_buffer(&bi, 0, pos_in_item - entry_count + sbytes[i] - 1,
+ tb->insert_size[0], body, zeros_num);
/* paste new directory entry */
- leaf_paste_entries(&bi,
- 0,
- pos_in_item
- -
- entry_count
- +
- sbytes
- [i] -
- 1, 1,
- (struct
- reiserfs_de_head
- *)
- body,
- body
- +
- DEH_SIZE,
- tb->
- insert_size
- [0]
- );
+ leaf_paste_entries(&bi, 0, pos_in_item - entry_count + sbytes[i] - 1, 1,
+ (struct reiserfs_de_head *) body,
+ body + DEH_SIZE, tb->insert_size[0]);
tb->insert_size[0] = 0;
pos_in_item++;
} else { /* new directory entry doesn't fall into S_new[i] */
- leaf_move_items
- (LEAF_FROM_S_TO_SNEW,
- tb, snum[i],
- sbytes[i],
- S_new[i]);
+ leaf_move_items(LEAF_FROM_S_TO_SNEW,tb, snum[i], sbytes[i], S_new[i]);
}
} else { /* regular object */
- int n_shift, n_rem,
- r_zeros_number;
+ int n_shift, n_rem, r_zeros_number;
const char *r_body;
- RFALSE(pos_in_item !=
- ih_item_len
- (B_N_PITEM_HEAD
- (tbS0, item_pos))
- || tb->insert_size[0] <=
- 0,
+ RFALSE(pos_in_item != ih_item_len(B_N_PITEM_HEAD(tbS0, item_pos)) || tb->insert_size[0] <= 0,
"PAP-12225: item too short or insert_size <= 0");
/* Calculate number of bytes which must be shifted from appended item */
- n_shift =
- sbytes[i] -
- tb->insert_size[0];
+ n_shift = sbytes[i] - tb->insert_size[0];
if (n_shift < 0)
n_shift = 0;
- leaf_move_items
- (LEAF_FROM_S_TO_SNEW, tb,
- snum[i], n_shift,
- S_new[i]);
+ leaf_move_items(LEAF_FROM_S_TO_SNEW, tb, snum[i], n_shift, S_new[i]);
/* Calculate number of bytes which must remain in body after append to S_new[i] */
- n_rem =
- tb->insert_size[0] -
- sbytes[i];
+ n_rem = tb->insert_size[0] - sbytes[i];
if (n_rem < 0)
n_rem = 0;
/* Append part of body into S_new[0] */
buffer_info_init_bh(tb, &bi, S_new[i]);
if (n_rem > zeros_num) {
r_zeros_number = 0;
- r_body =
- body + n_rem -
- zeros_num;
+ r_body = body + n_rem - zeros_num;
} else {
r_body = body;
- r_zeros_number =
- zeros_num - n_rem;
- zeros_num -=
- r_zeros_number;
+ r_zeros_number = zeros_num - n_rem;
+ zeros_num -= r_zeros_number;
}
- leaf_paste_in_buffer(&bi, 0,
- n_shift,
- tb->
- insert_size
- [0] -
- n_rem,
- r_body,
- r_zeros_number);
+ leaf_paste_in_buffer(&bi, 0, n_shift,
+ tb->insert_size[0] - n_rem,
+ r_body, r_zeros_number);
{
struct item_head *tmp;
- tmp =
- B_N_PITEM_HEAD(S_new
- [i],
- 0);
+ tmp = B_N_PITEM_HEAD(S_new[i], 0);
if (is_indirect_le_ih
(tmp)) {
- set_ih_free_space
- (tmp, 0);
- set_le_ih_k_offset
- (tmp,
- le_ih_k_offset
- (tmp) +
- (n_rem <<
- (tb->
- tb_sb->
- s_blocksize_bits
- -
- UNFM_P_SHIFT)));
+ set_ih_free_space(tmp, 0);
+ set_le_ih_k_offset(tmp, le_ih_k_offset(tmp) + (n_rem << (tb->tb_sb->s_blocksize_bits - UNFM_P_SHIFT)));
} else {
- set_le_ih_k_offset
- (tmp,
- le_ih_k_offset
- (tmp) +
- n_rem);
+ set_le_ih_k_offset(tmp, le_ih_k_offset(tmp) + n_rem);
}
}
struct item_head *pasted;
#ifdef CONFIG_REISERFS_CHECK
- struct item_head *ih_check =
- B_N_PITEM_HEAD(tbS0, item_pos);
+ struct item_head *ih_check = B_N_PITEM_HEAD(tbS0, item_pos);
if (!is_direntry_le_ih(ih_check)
&& (pos_in_item != ih_item_len(ih_check)
"to ih_item_len");
#endif /* CONFIG_REISERFS_CHECK */
- leaf_mi =
- leaf_move_items(LEAF_FROM_S_TO_SNEW,
+ leaf_mi = leaf_move_items(LEAF_FROM_S_TO_SNEW,
tb, snum[i],
sbytes[i],
S_new[i]);
/* paste into item */
buffer_info_init_bh(tb, &bi, S_new[i]);
leaf_paste_in_buffer(&bi,
- item_pos - n +
- snum[i],
+ item_pos - n + snum[i],
pos_in_item,
tb->insert_size[0],
body, zeros_num);
- pasted =
- B_N_PITEM_HEAD(S_new[i],
- item_pos - n +
- snum[i]);
+ pasted = B_N_PITEM_HEAD(S_new[i], item_pos - n + snum[i]);
if (is_direntry_le_ih(pasted)) {
leaf_paste_entries(&bi,
- item_pos -
- n + snum[i],
- pos_in_item,
- 1,
- (struct
- reiserfs_de_head
- *)body,
- body +
- DEH_SIZE,
- tb->
- insert_size
- [0]
+ item_pos - n + snum[i],
+ pos_in_item, 1,
+ (struct reiserfs_de_head *)body,
+ body + DEH_SIZE,
+ tb->insert_size[0]
);
}
default: /* cases d and t */
reiserfs_panic(tb->tb_sb, "PAP-12245",
"blknum > 2: unexpected mode: %s(%d)",
- (flag ==
- M_DELETE) ? "DELETE" : ((flag ==
- M_CUT) ? "CUT"
- : "UNKNOWN"),
- flag);
+ (flag == M_DELETE) ? "DELETE" : ((flag == M_CUT) ? "CUT" : "UNKNOWN"), flag);
}
memcpy(insert_key + i, B_N_PKEY(S_new[i], 0), KEY_SIZE);
/* If we insert the first key change the delimiting key */
if (item_pos == 0) {
if (tb->CFL[0]) /* can be 0 in reiserfsck */
- replace_key(tb, tb->CFL[0], tb->lkey[0],
- tbS0, 0);
-
+ replace_key(tb, tb->CFL[0], tb->lkey[0], tbS0, 0);
}
break;
pasted = B_N_PITEM_HEAD(tbS0, item_pos);
/* when directory, may be new entry already pasted */
if (is_direntry_le_ih(pasted)) {
- if (pos_in_item >= 0 &&
- pos_in_item <=
- ih_entry_count(pasted)) {
+ if (pos_in_item >= 0 && pos_in_item <= ih_entry_count(pasted)) {
RFALSE(!tb->insert_size[0],
"PAP-12260: insert_size is 0 already");
/* prepare space */
buffer_info_init_tbS0(tb, &bi);
- leaf_paste_in_buffer(&bi,
- item_pos,
- pos_in_item,
- tb->
- insert_size
- [0], body,
+ leaf_paste_in_buffer(&bi, item_pos, pos_in_item,
+ tb->insert_size[0], body,
zeros_num);
/* paste entry */
- leaf_paste_entries(&bi,
- item_pos,
- pos_in_item,
- 1,
- (struct
- reiserfs_de_head
- *)body,
- body +
- DEH_SIZE,
- tb->
- insert_size
- [0]
- );
+ leaf_paste_entries(&bi, item_pos, pos_in_item, 1,
+ (struct reiserfs_de_head *)body,
+ body + DEH_SIZE,
+ tb->insert_size[0]);
if (!item_pos && !pos_in_item) {
- RFALSE(!tb->CFL[0]
- || !tb->L[0],
+ RFALSE(!tb->CFL[0] || !tb->L[0],
"PAP-12270: CFL[0]/L[0] must be specified");
- if (tb->CFL[0]) {
- replace_key(tb,
- tb->
- CFL
- [0],
- tb->
- lkey
- [0],
- tbS0,
- 0);
-
- }
+ if (tb->CFL[0])
+ replace_key(tb, tb->CFL[0], tb->lkey[0], tbS0, 0);
}
tb->insert_size[0] = 0;
}
"PAP-12275: insert size must not be %d",
tb->insert_size[0]);
buffer_info_init_tbS0(tb, &bi);
- leaf_paste_in_buffer(&bi,
- item_pos,
- pos_in_item,
- tb->
- insert_size
- [0], body,
- zeros_num);
+ leaf_paste_in_buffer(&bi, item_pos, pos_in_item,
+ tb->insert_size[0], body, zeros_num);
if (is_indirect_le_ih(pasted)) {
#if 0
tb->
insert_size[0]);
#endif
- set_ih_free_space
- (pasted, 0);
+ set_ih_free_space(pasted, 0);
}
tb->insert_size[0] = 0;
}
else {
if (tb->insert_size[0]) {
print_cur_tb("12285");
- reiserfs_panic(tb->
- tb_sb,
+ reiserfs_panic(tb->tb_sb,
"PAP-12285",
"insert_size "
"must be 0 "
return do_fsync(fd, 1);
}
-/**
- * generic_write_sync - perform syncing after a write if file / inode is sync
- * @file: file to which the write happened
- * @pos: offset where the write started
- * @count: length of the write
- *
- * This is just a simple wrapper about our general syncing function.
- */
-int generic_write_sync(struct file *file, loff_t pos, loff_t count)
-{
- if (!(file->f_flags & O_DSYNC) && !IS_SYNC(file->f_mapping->host))
- return 0;
- return vfs_fsync_range(file, pos, pos + count - 1,
- (file->f_flags & __O_SYNC) ? 0 : 1);
-}
-EXPORT_SYMBOL(generic_write_sync);
-
/*
* sys_sync_file_range() permits finely controlled syncing over a segment of
* a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
XFS_STATS_ADD(xs_write_bytes, ret);
/* Handle various SYNC-type writes */
- err = generic_write_sync(file, pos, ret);
+ err = generic_write_sync(file, iocb->ki_pos - ret, ret);
if (err < 0)
ret = err;
}
}
#endif
+#ifndef ptep_set_numa
+static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ pte_t ptent = *ptep;
+
+ ptent = pte_mknuma(ptent);
+ set_pte_at(mm, addr, ptep, ptent);
+ return;
+}
+#endif
+
#ifndef pmd_mknuma
static inline pmd_t pmd_mknuma(pmd_t pmd)
{
return pmd_clear_flags(pmd, _PAGE_PRESENT);
}
#endif
+
+#ifndef pmdp_set_numa
+static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
+ pmd_t *pmdp)
+{
+ pmd_t pmd = *pmdp;
+
+ pmd = pmd_mknuma(pmd);
+ set_pmd_at(mm, addr, pmdp, pmd);
+ return;
+}
+#endif
#else
extern int pte_numa(pte_t pte);
extern int pmd_numa(pmd_t pmd);
extern pmd_t pmd_mknonnuma(pmd_t pmd);
extern pte_t pte_mknuma(pte_t pte);
extern pmd_t pmd_mknuma(pmd_t pmd);
+extern void ptep_set_numa(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+extern void pmdp_set_numa(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp);
#endif /* CONFIG_ARCH_USES_NUMA_PROT_NONE */
#else
static inline int pmd_numa(pmd_t pmd)
return pte;
}
+static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ return;
+}
+
+
static inline pmd_t pmd_mknuma(pmd_t pmd)
{
return pmd;
}
+
+static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
+ pmd_t *pmdp)
+{
+ return ;
+}
#endif /* CONFIG_NUMA_BALANCING */
#endif /* CONFIG_MMU */
#define DRM_INFO(fmt, ...) \
printk(KERN_INFO "[" DRM_NAME "] " fmt, ##__VA_ARGS__)
+#define DRM_INFO_ONCE(fmt, ...) \
+ printk_once(KERN_INFO "[" DRM_NAME "] " fmt, ##__VA_ARGS__)
+
/**
* Debug output.
*
--- /dev/null
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ * Copyright 2013 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CLOCK_BCM281XX_H
+#define _CLOCK_BCM281XX_H
+
+/*
+ * This file defines the values used to specify clocks provided by
+ * the clock control units (CCUs) on Broadcom BCM281XX family SoCs.
+ */
+
+/* root CCU clock ids */
+
+#define BCM281XX_ROOT_CCU_FRAC_1M 0
+#define BCM281XX_ROOT_CCU_CLOCK_COUNT 1
+
+/* aon CCU clock ids */
+
+#define BCM281XX_AON_CCU_HUB_TIMER 0
+#define BCM281XX_AON_CCU_PMU_BSC 1
+#define BCM281XX_AON_CCU_PMU_BSC_VAR 2
+#define BCM281XX_AON_CCU_CLOCK_COUNT 3
+
+/* hub CCU clock ids */
+
+#define BCM281XX_HUB_CCU_TMON_1M 0
+#define BCM281XX_HUB_CCU_CLOCK_COUNT 1
+
+/* master CCU clock ids */
+
+#define BCM281XX_MASTER_CCU_SDIO1 0
+#define BCM281XX_MASTER_CCU_SDIO2 1
+#define BCM281XX_MASTER_CCU_SDIO3 2
+#define BCM281XX_MASTER_CCU_SDIO4 3
+#define BCM281XX_MASTER_CCU_USB_IC 4
+#define BCM281XX_MASTER_CCU_HSIC2_48M 5
+#define BCM281XX_MASTER_CCU_HSIC2_12M 6
+#define BCM281XX_MASTER_CCU_CLOCK_COUNT 7
+
+/* slave CCU clock ids */
+
+#define BCM281XX_SLAVE_CCU_UARTB 0
+#define BCM281XX_SLAVE_CCU_UARTB2 1
+#define BCM281XX_SLAVE_CCU_UARTB3 2
+#define BCM281XX_SLAVE_CCU_UARTB4 3
+#define BCM281XX_SLAVE_CCU_SSP0 4
+#define BCM281XX_SLAVE_CCU_SSP2 5
+#define BCM281XX_SLAVE_CCU_BSC1 6
+#define BCM281XX_SLAVE_CCU_BSC2 7
+#define BCM281XX_SLAVE_CCU_BSC3 8
+#define BCM281XX_SLAVE_CCU_PWM 9
+#define BCM281XX_SLAVE_CCU_CLOCK_COUNT 10
+
+#endif /* _CLOCK_BCM281XX_H */
#define R8A7790_CLK_MSIOF1 8
#define R8A7790_CLK_MSIOF3 15
#define R8A7790_CLK_SCIFB2 16
-#define R8A7790_CLK_SYS_DMAC0 18
-#define R8A7790_CLK_SYS_DMAC1 19
+#define R8A7790_CLK_SYS_DMAC1 18
+#define R8A7790_CLK_SYS_DMAC0 19
/* MSTP3 */
#define R8A7790_CLK_TPU0 4
--- /dev/null
+/*
+ * This header provides constants for the reset controller
+ * based peripheral powerdown requests on the STMicroelectronics
+ * STiH415 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH415
+#define _DT_BINDINGS_RESET_CONTROLLER_STIH415
+
+#define STIH415_EMISS_POWERDOWN 0
+#define STIH415_NAND_POWERDOWN 1
+#define STIH415_KEYSCAN_POWERDOWN 2
+#define STIH415_USB0_POWERDOWN 3
+#define STIH415_USB1_POWERDOWN 4
+#define STIH415_USB2_POWERDOWN 5
+#define STIH415_SATA0_POWERDOWN 6
+#define STIH415_SATA1_POWERDOWN 7
+#define STIH415_PCIE_POWERDOWN 8
+
+#define STIH415_ETH0_SOFTRESET 0
+#define STIH415_ETH1_SOFTRESET 1
+#define STIH415_IRB_SOFTRESET 2
+#define STIH415_USB0_SOFTRESET 3
+#define STIH415_USB1_SOFTRESET 4
+#define STIH415_USB2_SOFTRESET 5
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH415 */
--- /dev/null
+/*
+ * This header provides constants for the reset controller
+ * based peripheral powerdown requests on the STMicroelectronics
+ * STiH416 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH416
+#define _DT_BINDINGS_RESET_CONTROLLER_STIH416
+
+#define STIH416_EMISS_POWERDOWN 0
+#define STIH416_NAND_POWERDOWN 1
+#define STIH416_KEYSCAN_POWERDOWN 2
+#define STIH416_USB0_POWERDOWN 3
+#define STIH416_USB1_POWERDOWN 4
+#define STIH416_USB2_POWERDOWN 5
+#define STIH416_USB3_POWERDOWN 6
+#define STIH416_SATA0_POWERDOWN 7
+#define STIH416_SATA1_POWERDOWN 8
+#define STIH416_PCIE0_POWERDOWN 9
+#define STIH416_PCIE1_POWERDOWN 10
+
+#define STIH416_ETH0_SOFTRESET 0
+#define STIH416_ETH1_SOFTRESET 1
+#define STIH416_IRB_SOFTRESET 2
+#define STIH416_USB0_SOFTRESET 3
+#define STIH416_USB1_SOFTRESET 4
+#define STIH416_USB2_SOFTRESET 5
+#define STIH416_USB3_SOFTRESET 6
+#define STIH416_SATA0_SOFTRESET 7
+#define STIH416_SATA1_SOFTRESET 8
+#define STIH416_PCIE0_SOFTRESET 9
+#define STIH416_PCIE1_SOFTRESET 10
+#define STIH416_AUD_DAC_SOFTRESET 11
+#define STIH416_HDTVOUT_SOFTRESET 12
+#define STIH416_VTAC_M_RX_SOFTRESET 13
+#define STIH416_VTAC_A_RX_SOFTRESET 14
+#define STIH416_SYNC_HD_SOFTRESET 15
+#define STIH416_SYNC_SD_SOFTRESET 16
+#define STIH416_BLITTER_SOFTRESET 17
+#define STIH416_GPU_SOFTRESET 18
+#define STIH416_VTAC_M_TX_SOFTRESET 19
+#define STIH416_VTAC_A_TX_SOFTRESET 20
+#define STIH416_VTG_AUX_SOFTRESET 21
+#define STIH416_JPEG_DEC_SOFTRESET 22
+#define STIH416_HVA_SOFTRESET 23
+#define STIH416_COMPO_M_SOFTRESET 24
+#define STIH416_COMPO_A_SOFTRESET 25
+#define STIH416_VP8_DEC_SOFTRESET 26
+#define STIH416_VTG_MAIN_SOFTRESET 27
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH416 */
extern int prepare_bprm_creds(struct linux_binprm *bprm);
extern void install_exec_creds(struct linux_binprm *bprm);
extern void set_binfmt(struct linux_binfmt *new);
-extern void free_bprm(struct linux_binprm *);
extern ssize_t read_code(struct file *, unsigned long, loff_t, size_t);
#endif /* _LINUX_BINFMTS_H */
struct bio_vec bv;
struct bvec_iter iter;
+ /*
+ * We special case discard/write same, because they interpret bi_size
+ * differently:
+ */
+
+ if (bio->bi_rw & REQ_DISCARD)
+ return 1;
+
+ if (bio->bi_rw & REQ_WRITE_SAME)
+ return 1;
+
bio_for_each_segment(bv, bio, iter)
segs++;
extern struct bio *bio_clone_bioset(struct bio *, gfp_t, struct bio_set *bs);
extern struct bio_set *fs_bio_set;
+unsigned int bio_integrity_tag_size(struct bio *bio);
static inline struct bio *bio_alloc(gfp_t gfp_mask, unsigned int nr_iovecs)
{
*/
rq_timed_out_fn *timeout;
+ softirq_done_fn *complete;
+
/*
* Override for hctx allocations (should probably go)
*/
void blk_mq_flush_plug_list(struct blk_plug *plug, bool from_schedule);
-void blk_mq_insert_request(struct request_queue *, struct request *, bool);
+void blk_mq_insert_request(struct request_queue *, struct request *,
+ bool, bool);
void blk_mq_run_queues(struct request_queue *q, bool async);
void blk_mq_free_request(struct request *rq);
bool blk_mq_can_queue(struct blk_mq_hw_ctx *);
-struct request *blk_mq_alloc_request(struct request_queue *q, int rw, gfp_t gfp, bool reserved);
+struct request *blk_mq_alloc_request(struct request_queue *q, int rw, gfp_t gfp);
struct request *blk_mq_alloc_reserved_request(struct request_queue *q, int rw, gfp_t gfp);
struct request *blk_mq_rq_from_tag(struct request_queue *q, unsigned int tag);
void blk_mq_end_io(struct request *rq, int error);
+void blk_mq_complete_request(struct request *rq);
+
void blk_mq_stop_hw_queue(struct blk_mq_hw_ctx *hctx);
void blk_mq_start_hw_queue(struct blk_mq_hw_ctx *hctx);
void blk_mq_stop_hw_queues(struct request_queue *q);
struct list_head queuelist;
union {
struct call_single_data csd;
- struct work_struct mq_flush_data;
+ struct work_struct mq_flush_work;
};
struct request_queue *q;
unsigned long flush_pending_since;
struct list_head flush_queue[2];
struct list_head flush_data_in_flight;
- union {
- struct request flush_rq;
- struct {
- spinlock_t mq_flush_lock;
- struct work_struct mq_flush_work;
- };
- };
+ struct request *flush_rq;
+ spinlock_t mq_flush_lock;
struct mutex sysfs_lock;
#define CAN_SKB_H
#include <linux/types.h>
+#include <linux/skbuff.h>
#include <linux/can.h>
+#include <net/sock.h>
/*
* The struct can_skb_priv is used to transport additional information along
skb_reserve(skb, sizeof(struct can_skb_priv));
}
+static inline void can_skb_destructor(struct sk_buff *skb)
+{
+ sock_put(skb->sk);
+}
+
+static inline void can_skb_set_owner(struct sk_buff *skb, struct sock *sk)
+{
+ if (sk) {
+ sock_hold(sk);
+ skb->destructor = can_skb_destructor;
+ skb->sk = sk;
+ }
+}
+
+/*
+ * returns an unshared skb owned by the original sock to be echo'ed back
+ */
+static inline struct sk_buff *can_create_echo_skb(struct sk_buff *skb)
+{
+ if (skb_shared(skb)) {
+ struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
+
+ if (likely(nskb)) {
+ can_skb_set_owner(nskb, skb->sk);
+ consume_skb(skb);
+ return nskb;
+ } else {
+ kfree_skb(skb);
+ return NULL;
+ }
+ }
+
+ /* we can assume to have an unshared skb with proper owner */
+ return skb;
+}
+
#endif /* CAN_SKB_H */
/*
* Ceph setxattr request flags.
*/
-#define CEPH_XATTR_CREATE 1
-#define CEPH_XATTR_REPLACE 2
+#define CEPH_XATTR_CREATE (1 << 0)
+#define CEPH_XATTR_REPLACE (1 << 1)
+#define CEPH_XATTR_REMOVE (1 << 31)
union ceph_mds_request_args {
struct {
*
* (asm goto is automatically volatile - the naming reflects this.)
*/
-#if GCC_VERSION <= 40801
-# define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
-#else
-# define asm_volatile_goto(x...) do { asm goto(x); } while (0)
-#endif
+#define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0)
#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
#if GCC_VERSION >= 40400
size_t size, int flags, const char *);
#define dma_buf_export(priv, ops, size, flags) \
- dma_buf_export_named(priv, ops, size, flags, __FILE__)
+ dma_buf_export_named(priv, ops, size, flags, KBUILD_MODNAME)
int dma_buf_fd(struct dma_buf *dmabuf, int flags);
struct dma_buf *dma_buf_get(int fd);
extern int filp_close(struct file *, fl_owner_t id);
extern struct filename *getname(const char __user *);
+extern struct filename *getname_kernel(const char *);
enum {
FILE_CREATED = 1,
extern int vfs_fsync_range(struct file *file, loff_t start, loff_t end,
int datasync);
extern int vfs_fsync(struct file *file, int datasync);
-extern int generic_write_sync(struct file *file, loff_t pos, loff_t count);
+static inline int generic_write_sync(struct file *file, loff_t pos, loff_t count)
+{
+ if (!(file->f_flags & O_DSYNC) && !IS_SYNC(file->f_mapping->host))
+ return 0;
+ return vfs_fsync_range(file, pos, pos + count - 1,
+ (file->f_flags & __O_SYNC) ? 0 : 1);
+}
extern void emergency_sync(void);
extern void emergency_remount(void);
#ifdef CONFIG_BLOCK
#include <linux/err.h>
#include <linux/kernel.h>
-#ifdef CONFIG_GPIOLIB
-
struct device;
struct gpio_chip;
*/
struct gpio_desc;
+#ifdef CONFIG_GPIOLIB
+
/* Acquire and dispose GPIOs */
struct gpio_desc *__must_check gpiod_get(struct device *dev,
const char *con_id);
struct vmbus_channel_initiate_contact {
struct vmbus_channel_message_header header;
u32 vmbus_version_requested;
- u32 padding2;
+ u32 target_vcpu; /* The VCPU the host should respond to */
u64 interrupt_page;
u64 monitor_page1;
u64 monitor_page2;
devname, dev_id);
}
+extern int __must_check
+devm_request_any_context_irq(struct device *dev, unsigned int irq,
+ irq_handler_t handler, unsigned long irqflags,
+ const char *devname, void *dev_id);
+
extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id);
/*
void gic_migrate_target(unsigned int new_cpu_id);
unsigned long gic_get_sgir_physaddr(void);
+extern const struct irq_domain_ops *gic_routable_irq_domain_ops;
+static inline void __init register_routable_domain_ops
+ (const struct irq_domain_ops *ops)
+{
+ gic_routable_irq_domain_ops = ops;
+}
#endif /* __ASSEMBLY */
-
#endif
struct device_node;
struct pt_regs;
-void __vic_init(void __iomem *base, int irq_start, u32 vic_sources,
- u32 resume_sources, struct device_node *node);
+void __vic_init(void __iomem *base, int parent_irq, int irq_start,
+ u32 vic_sources, u32 resume_sources, struct device_node *node);
void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
+int vic_init_cascaded(void __iomem *base, unsigned int parent_irq,
+ u32 vic_sources, u32 resume_sources);
#endif
--- /dev/null
+/*
+ * drivers/irqchip/irq-crossbar.h
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+int irqcrossbar_init(void);
#include <linux/pci.h>
#include <linux/spinlock_types.h>
#include <linux/semaphore.h>
+#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/radix-tree.h>
+
#include <linux/mlx5/device.h>
#include <linux/mlx5/doorbell.h>
* protect uuar allocation data structs
*/
struct mutex lock;
+ u32 ver;
};
struct mlx5_bf {
* Arguments to the open_confirm call.
*/
struct nfs_open_confirmargs {
+ struct nfs4_sequence_args seq_args;
const struct nfs_fh * fh;
nfs4_stateid * stateid;
struct nfs_seqid * seqid;
};
struct nfs_open_confirmres {
+ struct nfs4_sequence_res seq_res;
nfs4_stateid stateid;
struct nfs_seqid * seqid;
};
struct dma_pool *prp_small_pool;
int instance;
int queue_count;
- int db_stride;
+ u32 db_stride;
u32 ctrl_config;
struct msix_entry *entry;
struct nvme_bar __iomem *bar;
struct list_head namespaces;
struct kref kref;
struct miscdevice miscdev;
+ struct work_struct reset_work;
char name[12];
char serial[20];
char model[40];
u32 max_hw_sectors;
u32 stripe_size;
u16 oncs;
+ u16 abort_limit;
+ u8 initialized;
};
/*
struct sg_io_hdr;
int nvme_sg_io(struct nvme_ns *ns, struct sg_io_hdr __user *u_hdr);
+int nvme_sg_io32(struct nvme_ns *ns, unsigned long arg);
int nvme_sg_get_version_num(int __user *ip);
#endif /* _LINUX_NVME_H */
extern struct device_node *of_find_node_by_name(struct device_node *from,
const char *name);
-#define for_each_node_by_name(dn, name) \
- for (dn = of_find_node_by_name(NULL, name); dn; \
- dn = of_find_node_by_name(dn, name))
extern struct device_node *of_find_node_by_type(struct device_node *from,
const char *type);
-#define for_each_node_by_type(dn, type) \
- for (dn = of_find_node_by_type(NULL, type); dn; \
- dn = of_find_node_by_type(dn, type))
extern struct device_node *of_find_compatible_node(struct device_node *from,
const char *type, const char *compat);
-#define for_each_compatible_node(dn, type, compatible) \
- for (dn = of_find_compatible_node(NULL, type, compatible); dn; \
- dn = of_find_compatible_node(dn, type, compatible))
extern struct device_node *of_find_matching_node_and_match(
struct device_node *from,
const struct of_device_id *matches,
const struct of_device_id **match);
-static inline struct device_node *of_find_matching_node(
- struct device_node *from,
- const struct of_device_id *matches)
-{
- return of_find_matching_node_and_match(from, matches, NULL);
-}
-#define for_each_matching_node(dn, matches) \
- for (dn = of_find_matching_node(NULL, matches); dn; \
- dn = of_find_matching_node(dn, matches))
-#define for_each_matching_node_and_match(dn, matches, match) \
- for (dn = of_find_matching_node_and_match(NULL, matches, match); \
- dn; dn = of_find_matching_node_and_match(dn, matches, match))
+
extern struct device_node *of_find_node_by_path(const char *path);
extern struct device_node *of_find_node_by_phandle(phandle handle);
extern struct device_node *of_get_parent(const struct device_node *node);
extern struct device_node *of_get_child_by_name(const struct device_node *node,
const char *name);
-#define for_each_child_of_node(parent, child) \
- for (child = of_get_next_child(parent, NULL); child != NULL; \
- child = of_get_next_child(parent, child))
-
-#define for_each_available_child_of_node(parent, child) \
- for (child = of_get_next_available_child(parent, NULL); child != NULL; \
- child = of_get_next_available_child(parent, child))
-
-static inline int of_get_child_count(const struct device_node *np)
-{
- struct device_node *child;
- int num = 0;
-
- for_each_child_of_node(np, child)
- num++;
-
- return num;
-}
-
-static inline int of_get_available_child_count(const struct device_node *np)
-{
- struct device_node *child;
- int num = 0;
-
- for_each_available_child_of_node(np, child)
- num++;
-
- return num;
-}
/* cache lookup */
extern struct device_node *of_find_next_cache_node(const struct device_node *);
extern struct device_node *of_find_node_with_property(
struct device_node *from, const char *prop_name);
-#define for_each_node_with_property(dn, prop_name) \
- for (dn = of_find_node_with_property(NULL, prop_name); dn; \
- dn = of_find_node_with_property(dn, prop_name))
extern struct property *of_find_property(const struct device_node *np,
const char *name,
return NULL;
}
-static inline struct device_node *of_get_parent(const struct device_node *node)
+static inline struct device_node *of_find_node_by_type(struct device_node *from,
+ const char *type)
{
return NULL;
}
-static inline bool of_have_populated_dt(void)
+static inline struct device_node *of_find_matching_node_and_match(
+ struct device_node *from,
+ const struct of_device_id *matches,
+ const struct of_device_id **match)
{
- return false;
+ return NULL;
}
-/* Kill an unused variable warning on a device_node pointer */
-static inline void __of_use_dn(const struct device_node *np)
+static inline struct device_node *of_get_parent(const struct device_node *node)
{
+ return NULL;
}
-#define for_each_child_of_node(parent, child) \
- while (__of_use_dn(parent), __of_use_dn(child), 0)
+static inline struct device_node *of_get_next_child(
+ const struct device_node *node, struct device_node *prev)
+{
+ return NULL;
+}
-#define for_each_available_child_of_node(parent, child) \
- while (0)
+static inline struct device_node *of_get_next_available_child(
+ const struct device_node *node, struct device_node *prev)
+{
+ return NULL;
+}
-static inline struct device_node *of_get_child_by_name(
- const struct device_node *node,
- const char *name)
+static inline struct device_node *of_find_node_with_property(
+ struct device_node *from, const char *prop_name)
{
return NULL;
}
-static inline int of_get_child_count(const struct device_node *np)
+static inline bool of_have_populated_dt(void)
{
- return 0;
+ return false;
}
-static inline int of_get_available_child_count(const struct device_node *np)
+static inline struct device_node *of_get_child_by_name(
+ const struct device_node *node,
+ const char *name)
{
- return 0;
+ return NULL;
}
static inline int of_device_is_compatible(const struct device_node *device,
static inline int of_node_to_nid(struct device_node *device) { return 0; }
#endif
+static inline struct device_node *of_find_matching_node(
+ struct device_node *from,
+ const struct of_device_id *matches)
+{
+ return of_find_matching_node_and_match(from, matches, NULL);
+}
+
/**
* of_property_read_bool - Findfrom a property
* @np: device node from which the property value is to be read.
s; \
s = of_prop_next_string(prop, s))
+#define for_each_node_by_name(dn, name) \
+ for (dn = of_find_node_by_name(NULL, name); dn; \
+ dn = of_find_node_by_name(dn, name))
+#define for_each_node_by_type(dn, type) \
+ for (dn = of_find_node_by_type(NULL, type); dn; \
+ dn = of_find_node_by_type(dn, type))
+#define for_each_compatible_node(dn, type, compatible) \
+ for (dn = of_find_compatible_node(NULL, type, compatible); dn; \
+ dn = of_find_compatible_node(dn, type, compatible))
+#define for_each_matching_node(dn, matches) \
+ for (dn = of_find_matching_node(NULL, matches); dn; \
+ dn = of_find_matching_node(dn, matches))
+#define for_each_matching_node_and_match(dn, matches, match) \
+ for (dn = of_find_matching_node_and_match(NULL, matches, match); \
+ dn; dn = of_find_matching_node_and_match(dn, matches, match))
+
+#define for_each_child_of_node(parent, child) \
+ for (child = of_get_next_child(parent, NULL); child != NULL; \
+ child = of_get_next_child(parent, child))
+#define for_each_available_child_of_node(parent, child) \
+ for (child = of_get_next_available_child(parent, NULL); child != NULL; \
+ child = of_get_next_available_child(parent, child))
+
+#define for_each_node_with_property(dn, prop_name) \
+ for (dn = of_find_node_with_property(NULL, prop_name); dn; \
+ dn = of_find_node_with_property(dn, prop_name))
+
+static inline int of_get_child_count(const struct device_node *np)
+{
+ struct device_node *child;
+ int num = 0;
+
+ for_each_child_of_node(np, child)
+ num++;
+
+ return num;
+}
+
+static inline int of_get_available_child_count(const struct device_node *np)
+{
+ struct device_node *child;
+ int num = 0;
+
+ for_each_available_child_of_node(np, child)
+ num++;
+
+ return num;
+}
+
#if defined(CONFIG_PROC_FS) && defined(CONFIG_PROC_DEVICETREE)
extern void proc_device_tree_add_node(struct device_node *, struct proc_dir_entry *);
extern void proc_device_tree_add_prop(struct proc_dir_entry *pde, struct property *prop);
static inline void of_device_node_put(struct device *dev) { }
-static inline const struct of_device_id *of_match_device(
+static inline const struct of_device_id *__of_match_device(
const struct of_device_id *matches, const struct device *dev)
{
return NULL;
}
+#define of_match_device(matches, dev) \
+ __of_match_device(of_match_ptr(matches), (dev))
static inline struct device_node *of_cpu_device_node_get(int cpu)
{
TESTPAGEFLAG(Writeback, writeback) TESTSCFLAG(Writeback, writeback)
PAGEFLAG(MappedToDisk, mappedtodisk)
-/* PG_readahead is only used for file reads; PG_reclaim is only for writes */
+/* PG_readahead is only used for reads; PG_reclaim is only for writes */
PAGEFLAG(Reclaim, reclaim) TESTCLEARFLAG(Reclaim, reclaim)
-PAGEFLAG(Readahead, reclaim) /* Reminder to do async read-ahead */
+PAGEFLAG(Readahead, reclaim) TESTCLEARFLAG(Readahead, reclaim)
#ifdef CONFIG_HIGHMEM
/*
phy->attrs.bus_width = bus_width;
}
struct phy *phy_get(struct device *dev, const char *string);
+struct phy *phy_optional_get(struct device *dev, const char *string);
struct phy *devm_phy_get(struct device *dev, const char *string);
+struct phy *devm_phy_optional_get(struct device *dev, const char *string);
void phy_put(struct phy *phy);
void devm_phy_put(struct device *dev, struct phy *phy);
struct phy *of_phy_simple_xlate(struct device *dev,
return ERR_PTR(-ENOSYS);
}
+static inline struct phy *phy_optional_get(struct device *dev,
+ const char *string)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
static inline struct phy *devm_phy_get(struct device *dev, const char *string)
{
return ERR_PTR(-ENOSYS);
}
+static inline struct phy *devm_phy_optional_get(struct device *dev,
+ const char *string)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
static inline void phy_put(struct phy *phy)
{
}
-void integrator_clk_init(bool is_cp);
void integrator_impd1_clk_init(void __iomem *base, unsigned int id);
void integrator_impd1_clk_exit(unsigned int id);
#ifndef _MACH_DAVINCI_AEMIF_H
#define _MACH_DAVINCI_AEMIF_H
+#include <linux/platform_device.h>
+
#define NRCSR_OFFSET 0x00
#define AWCCR_OFFSET 0x04
#define A1CR_OFFSET 0x10
u8 ta;
};
-int davinci_aemif_setup_timing(struct davinci_aemif_timing *t,
- void __iomem *base, unsigned cs);
+int davinci_aemif_setup(struct platform_device *pdev);
#endif
struct device;
struct reset_control;
+#ifdef CONFIG_RESET_CONTROLLER
+
int reset_control_reset(struct reset_control *rstc);
int reset_control_assert(struct reset_control *rstc);
int reset_control_deassert(struct reset_control *rstc);
void reset_control_put(struct reset_control *rstc);
struct reset_control *devm_reset_control_get(struct device *dev, const char *id);
-int device_reset(struct device *dev);
+int __must_check device_reset(struct device *dev);
+
+static inline int device_reset_optional(struct device *dev)
+{
+ return device_reset(dev);
+}
+
+static inline struct reset_control *reset_control_get_optional(
+ struct device *dev, const char *id)
+{
+ return reset_control_get(dev, id);
+}
+
+static inline struct reset_control *devm_reset_control_get_optional(
+ struct device *dev, const char *id)
+{
+ return devm_reset_control_get(dev, id);
+}
+
+#else
+
+static inline int reset_control_reset(struct reset_control *rstc)
+{
+ WARN_ON(1);
+ return 0;
+}
+
+static inline int reset_control_assert(struct reset_control *rstc)
+{
+ WARN_ON(1);
+ return 0;
+}
+
+static inline int reset_control_deassert(struct reset_control *rstc)
+{
+ WARN_ON(1);
+ return 0;
+}
+
+static inline void reset_control_put(struct reset_control *rstc)
+{
+ WARN_ON(1);
+}
+
+static inline int device_reset_optional(struct device *dev)
+{
+ return -ENOSYS;
+}
+
+static inline struct reset_control *reset_control_get_optional(
+ struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline struct reset_control *devm_reset_control_get_optional(
+ struct device *dev, const char *id)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+#endif /* CONFIG_RESET_CONTROLLER */
#endif
struct fs_struct;
struct perf_event_context;
struct blk_plug;
+struct filename;
/*
* List of flags we want to share for kernel threads,
extern int allow_signal(int);
extern int disallow_signal(int);
-extern int do_execve(const char *,
+extern int do_execve(struct filename *,
const char __user * const __user *,
const char __user * const __user *);
extern long do_fork(unsigned long, unsigned long, unsigned long, int __user *, int __user *);
unsigned long flags;
void __iomem *enable_reg;
+ void __iomem *status_reg;
unsigned int enable_bit;
void __iomem *mapped_reg;
unsigned long *best_freq, unsigned long *parent_freq,
unsigned int div_min, unsigned int div_max);
-#define SH_CLK_MSTP(_parent, _enable_reg, _enable_bit, _flags) \
+#define SH_CLK_MSTP(_parent, _enable_reg, _enable_bit, _status_reg, _flags) \
{ \
.parent = _parent, \
.enable_reg = (void __iomem *)_enable_reg, \
.enable_bit = _enable_bit, \
+ .status_reg = _status_reg, \
.flags = _flags, \
}
-#define SH_CLK_MSTP32(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, _f | CLK_ENABLE_REG_32BIT)
+#define SH_CLK_MSTP32(_p, _r, _b, _f) \
+ SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_32BIT)
-#define SH_CLK_MSTP16(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, _f | CLK_ENABLE_REG_16BIT)
+#define SH_CLK_MSTP32_STS(_p, _r, _b, _s, _f) \
+ SH_CLK_MSTP(_p, _r, _b, _s, _f | CLK_ENABLE_REG_32BIT)
-#define SH_CLK_MSTP8(_p, _r, _b, _f) \
- SH_CLK_MSTP(_p, _r, _b, _f | CLK_ENABLE_REG_8BIT)
+#define SH_CLK_MSTP16(_p, _r, _b, _f) \
+ SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_16BIT)
+
+#define SH_CLK_MSTP8(_p, _r, _b, _f) \
+ SH_CLK_MSTP(_p, _r, _b, 0, _f | CLK_ENABLE_REG_8BIT)
int sh_clk_mstp_register(struct clk *clks, int nr);
*/
extern void arch_disable_smp_support(void);
+extern void arch_enable_nonboot_cpus_begin(void);
+extern void arch_enable_nonboot_cpus_end(void);
+
void smp_setup_processor_id(void);
#endif /* __LINUX_SMP_H */
* message while queuing transfers that arrive in the meantime. When the
* driver is finished with this message, it must call
* spi_finalize_current_message() so the subsystem can issue the next
- * transfer
+ * message
* @unprepare_transfer_hardware: there are currently no more messages on the
* queue so the subsystem notifies the driver that it may relax the
* hardware by issuing this call
* - return 1 if the transfer is still in progress. When
* the driver is finished with this transfer it must
* call spi_finalize_current_transfer() so the subsystem
- * can issue the next transfer
+ * can issue the next transfer. Note: transfer_one and
+ * transfer_one_message are mutually exclusive; when both
+ * are set, the generic subsystem does not call your
+ * transfer_one callback.
* @unprepare_message: undo any work done by prepare_message().
* @cs_gpios: Array of GPIOs to use as chip select lines; one per CS
* number. Any individual value may be -ENOENT for CS lines that
* @sg: scatter gather buffer list, the buffer size of each element in
* the list (except the last) must be divisible by the endpoint's
* max packet size if no_sg_constraint isn't set in 'struct usb_bus'
- * (FIXME: scatter-gather under xHCI is broken for periodic transfers.
- * Do not use urb->sg for interrupt endpoints for now, only bulk.)
* @num_mapped_sgs: (internal) number of mapped sg entries
* @num_sgs: number of entries in the sg list
* @transfer_buffer_length: How big is transfer_buffer. The transfer may
THP_ZERO_PAGE_ALLOC,
THP_ZERO_PAGE_ALLOC_FAILED,
#endif
+#ifdef CONFIG_DEBUG_TLBFLUSH
#ifdef CONFIG_SMP
NR_TLB_REMOTE_FLUSH, /* cpu tried to flush others' tlbs */
NR_TLB_REMOTE_FLUSH_RECEIVED,/* cpu received ipi for flush */
-#endif
+#endif /* CONFIG_SMP */
NR_TLB_LOCAL_FLUSH_ALL,
NR_TLB_LOCAL_FLUSH_ONE,
+#endif /* CONFIG_DEBUG_TLBFLUSH */
NR_VM_EVENT_ITEMS
};
#define count_vm_numa_events(x, y) do { (void)(y); } while (0)
#endif /* CONFIG_NUMA_BALANCING */
+#ifdef CONFIG_DEBUG_TLBFLUSH
+#define count_vm_tlb_event(x) count_vm_event(x)
+#define count_vm_tlb_events(x, y) count_vm_events(x, y)
+#else
+#define count_vm_tlb_event(x) do {} while (0)
+#define count_vm_tlb_events(x, y) do { (void)(y); } while (0)
+#endif
+
#define __count_zone_vm_events(item, zone, delta) \
__count_vm_events(item##_NORMAL - ZONE_NORMAL + \
zone_idx(zone), delta)
struct list_head node;
};
+struct datalink_proto *make_EII_client(void);
+void destroy_EII_client(struct datalink_proto *dl);
#endif
}
unsigned int dn_mss_from_pmtu(struct net_device *dev, int mtu);
+void dn_register_sysctl(void);
+void dn_unregister_sysctl(void);
#define DN_MENUVER_ACC 0x01
#define DN_MENUVER_USR 0x02
struct sock *sk, int flags);
int dn_cache_dump(struct sk_buff *skb, struct netlink_callback *cb);
void dn_rt_cache_flush(int delay);
+int dn_route_rcv(struct sk_buff *skb, struct net_device *dev,
+ struct packet_type *pt, struct net_device *orig_dev);
/* Masks for flags field */
#define DN_RT_F_PID 0x07 /* Mask for packet type */
struct ethoc_platform_data {
u8 hwaddr[IFHWADDRLEN];
s8 phy_id;
+ u32 eth_clkfreq;
};
#endif /* !LINUX_NET_ETHOC_H */
}
void ipxitf_down(struct ipx_interface *intrfc);
+struct ipx_interface *ipxitf_find_using_net(__be32 net);
+int ipxitf_send(struct ipx_interface *intrfc, struct sk_buff *skb, char *node);
+__be16 ipx_cksum(struct ipxhdr *packet, int length);
+int ipxrtr_add_route(__be32 network, struct ipx_interface *intrfc,
+ unsigned char *node);
+void ipxrtr_del_routes(struct ipx_interface *intrfc);
+int ipxrtr_route_packet(struct sock *sk, struct sockaddr_ipx *usipx,
+ struct iovec *iov, size_t len, int noblock);
+int ipxrtr_route_skb(struct sk_buff *skb);
+struct ipx_route *ipxrtr_lookup(__be32 net);
+int ipxrtr_ioctl(unsigned int cmd, void __user *arg);
static __inline__ void ipxitf_put(struct ipx_interface *intrfc)
{
struct net *get_net_ns_by_pid(pid_t pid);
struct net *get_net_ns_by_fd(int pid);
+#ifdef CONFIG_SYSCTL
+void ipx_register_sysctl(void);
+void ipx_unregister_sysctl(void);
+#else
+#define ipx_register_sysctl()
+#define ipx_unregister_sysctl()
+#endif
+
#ifdef CONFIG_NET_NS
void __put_net(struct net *net);
extern unsigned int nf_conntrack_hash_rnd;
void init_nf_conntrack_hash_rnd(void);
+void nf_conntrack_tmpl_insert(struct net *net, struct nf_conn *tmpl);
+
#define NF_CT_STAT_INC(net, count) __this_cpu_inc((net)->ct.stat->count)
#define NF_CT_STAT_INC_ATOMIC(net, count) this_cpu_inc((net)->ct.stat->count)
* @owner: module reference
* @policy: netlink attribute policy
* @maxattr: highest netlink attribute number
+ * @family: address family for AF-specific types
*/
struct nft_expr_type {
const struct nft_expr_ops *(*select_ops)(const struct nft_ctx *,
struct module *owner;
const struct nla_policy *policy;
unsigned int maxattr;
+ u8 family;
};
/**
* struct nft_rule - nf_tables rule
*
* @list: used internally
- * @rcu_head: used internally for rcu
* @handle: rule handle
* @genmask: generation mask
* @dlen: length of expression data
*/
struct nft_rule {
struct list_head list;
- struct rcu_head rcu_head;
u64 handle:46,
genmask:2,
dlen:16;
*
* @rules: list of rules in the chain
* @list: used internally
- * @rcu_head: used internally
* @net: net namespace that this chain belongs to
* @table: table that this chain belongs to
* @handle: chain handle
struct nft_chain {
struct list_head rules;
struct list_head list;
- struct rcu_head rcu_head;
struct net *net;
struct nft_table *table;
u64 handle;
#define MODULE_ALIAS_NFT_CHAIN(family, name) \
MODULE_ALIAS("nft-chain-" __stringify(family) "-" name)
+#define MODULE_ALIAS_NFT_AF_EXPR(family, name) \
+ MODULE_ALIAS("nft-expr-" __stringify(family) "-" name)
+
#define MODULE_ALIAS_NFT_EXPR(name) \
MODULE_ALIAS("nft-expr-" name)
--- /dev/null
+#ifndef _NFT_REJECT_H_
+#define _NFT_REJECT_H_
+
+struct nft_reject {
+ enum nft_reject_types type:8;
+ u8 icmp_code;
+};
+
+extern const struct nla_policy nft_reject_policy[];
+
+int nft_reject_init(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nlattr * const tb[]);
+
+int nft_reject_dump(struct sk_buff *skb, const struct nft_expr *expr);
+
+void nft_reject_ipv4_eval(const struct nft_expr *expr,
+ struct nft_data data[NFT_REG_MAX + 1],
+ const struct nft_pktinfo *pkt);
+
+void nft_reject_ipv6_eval(const struct nft_expr *expr,
+ struct nft_data data[NFT_REG_MAX + 1],
+ const struct nft_pktinfo *pkt);
+
+#endif
IB_PORT_CAP_MASK_NOTICE_SUP = 1 << 22,
IB_PORT_BOOT_MGMT_SUP = 1 << 23,
IB_PORT_LINK_LATENCY_SUP = 1 << 24,
- IB_PORT_CLIENT_REG_SUP = 1 << 25
+ IB_PORT_CLIENT_REG_SUP = 1 << 25,
+ IB_PORT_IP_BASED_GIDS = 1 << 26
};
enum ib_port_width {
#define CMD_T_COMPLETE (1 << 2)
#define CMD_T_SENT (1 << 4)
#define CMD_T_STOP (1 << 5)
-#define CMD_T_FAILED (1 << 6)
#define CMD_T_DEV_ACTIVE (1 << 7)
#define CMD_T_REQUEST_STOP (1 << 8)
#define CMD_T_BUSY (1 << 9)
u32 state,
u64 mperf,
u64 aperf,
- u32 energy,
u32 freq
),
state,
mperf,
aperf,
- energy,
freq
),
__field(u32, state)
__field(u64, mperf)
__field(u64, aperf)
- __field(u32, energy)
__field(u32, freq)
),
__entry->state = state;
__entry->mperf = mperf;
__entry->aperf = aperf;
- __entry->energy = energy;
__entry->freq = freq;
),
- TP_printk("core_busy=%lu scaled=%lu state=%lu mperf=%llu aperf=%llu energy=%lu freq=%lu ",
+ TP_printk("core_busy=%lu scaled=%lu state=%lu mperf=%llu aperf=%llu freq=%lu ",
(unsigned long)__entry->core_busy,
(unsigned long)__entry->scaled_busy,
(unsigned long)__entry->state,
(unsigned long long)__entry->mperf,
(unsigned long long)__entry->aperf,
- (unsigned long)__entry->energy,
(unsigned long)__entry->freq
)
#define BTRFS_IOC_DEFAULT_SUBVOL _IOW(BTRFS_IOCTL_MAGIC, 19, __u64)
#define BTRFS_IOC_SPACE_INFO _IOWR(BTRFS_IOCTL_MAGIC, 20, \
struct btrfs_ioctl_space_args)
-#define BTRFS_IOC_GLOBAL_RSV _IOR(BTRFS_IOCTL_MAGIC, 20, __u64)
#define BTRFS_IOC_START_SYNC _IOR(BTRFS_IOCTL_MAGIC, 24, __u64)
#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \
* IPV6 extension headers
*/
#if __UAPI_DEF_IPPROTO_V6
-enum {
- IPPROTO_HOPOPTS = 0, /* IPv6 hop-by-hop options */
-#define IPPROTO_HOPOPTS IPPROTO_HOPOPTS
- IPPROTO_ROUTING = 43, /* IPv6 routing header */
-#define IPPROTO_ROUTING IPPROTO_ROUTING
- IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header */
-#define IPPROTO_FRAGMENT IPPROTO_FRAGMENT
- IPPROTO_ICMPV6 = 58, /* ICMPv6 */
-#define IPPROTO_ICMPV6 IPPROTO_ICMPV6
- IPPROTO_NONE = 59, /* IPv6 no next header */
-#define IPPROTO_NONE IPPROTO_NONE
- IPPROTO_DSTOPTS = 60, /* IPv6 destination options */
-#define IPPROTO_DSTOPTS IPPROTO_DSTOPTS
- IPPROTO_MH = 135, /* IPv6 mobility header */
-#define IPPROTO_MH IPPROTO_MH
-};
+#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */
+#define IPPROTO_ROUTING 43 /* IPv6 routing header */
+#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */
+#define IPPROTO_ICMPV6 58 /* ICMPv6 */
+#define IPPROTO_NONE 59 /* IPv6 no next header */
+#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */
+#define IPPROTO_MH 135 /* IPv6 mobility header */
#endif /* __UAPI_DEF_IPPROTO_V6 */
/*
#else
struct iovec *iov;
#endif
- int iovcnt;
+ __u32 iovcnt;
__u8 vr_idx;
__u8 update_used;
__u32 out_len;
__u32 rsvd11[5];
};
+struct nvme_abort_cmd {
+ __u8 opcode;
+ __u8 flags;
+ __u16 command_id;
+ __u32 rsvd1[9];
+ __le16 sqid;
+ __u16 cid;
+ __u32 rsvd11[5];
+};
+
struct nvme_download_firmware {
__u8 opcode;
__u8 flags;
struct nvme_download_firmware dlfw;
struct nvme_format_cmd format;
struct nvme_dsm_cmd dsm;
+ struct nvme_abort_cmd abort;
};
};
# UAPI Header export list
header-y += evtchn.h
+header-y += gntalloc.h
+header-y += gntdev.h
header-y += privcmd.h
--- /dev/null
+/******************************************************************************
+ * gntalloc.h
+ *
+ * Interface to /dev/xen/gntalloc.
+ *
+ * Author: Daniel De Graaf <dgdegra@tycho.nsa.gov>
+ *
+ * This file is in the public domain.
+ */
+
+#ifndef __LINUX_PUBLIC_GNTALLOC_H__
+#define __LINUX_PUBLIC_GNTALLOC_H__
+
+/*
+ * Allocates a new page and creates a new grant reference.
+ */
+#define IOCTL_GNTALLOC_ALLOC_GREF \
+_IOC(_IOC_NONE, 'G', 5, sizeof(struct ioctl_gntalloc_alloc_gref))
+struct ioctl_gntalloc_alloc_gref {
+ /* IN parameters */
+ /* The ID of the domain to be given access to the grants. */
+ uint16_t domid;
+ /* Flags for this mapping */
+ uint16_t flags;
+ /* Number of pages to map */
+ uint32_t count;
+ /* OUT parameters */
+ /* The offset to be used on a subsequent call to mmap(). */
+ uint64_t index;
+ /* The grant references of the newly created grant, one per page */
+ /* Variable size, depending on count */
+ uint32_t gref_ids[1];
+};
+
+#define GNTALLOC_FLAG_WRITABLE 1
+
+/*
+ * Deallocates the grant reference, allowing the associated page to be freed if
+ * no other domains are using it.
+ */
+#define IOCTL_GNTALLOC_DEALLOC_GREF \
+_IOC(_IOC_NONE, 'G', 6, sizeof(struct ioctl_gntalloc_dealloc_gref))
+struct ioctl_gntalloc_dealloc_gref {
+ /* IN parameters */
+ /* The offset returned in the map operation */
+ uint64_t index;
+ /* Number of references to unmap */
+ uint32_t count;
+};
+
+/*
+ * Sets up an unmap notification within the page, so that the other side can do
+ * cleanup if this side crashes. Required to implement cross-domain robust
+ * mutexes or close notification on communication channels.
+ *
+ * Each mapped page only supports one notification; multiple calls referring to
+ * the same page overwrite the previous notification. You must clear the
+ * notification prior to the IOCTL_GNTALLOC_DEALLOC_GREF if you do not want it
+ * to occur.
+ */
+#define IOCTL_GNTALLOC_SET_UNMAP_NOTIFY \
+_IOC(_IOC_NONE, 'G', 7, sizeof(struct ioctl_gntalloc_unmap_notify))
+struct ioctl_gntalloc_unmap_notify {
+ /* IN parameters */
+ /* Offset in the file descriptor for a byte within the page (same as
+ * used in mmap). If using UNMAP_NOTIFY_CLEAR_BYTE, this is the byte to
+ * be cleared. Otherwise, it can be any byte in the page whose
+ * notification we are adjusting.
+ */
+ uint64_t index;
+ /* Action(s) to take on unmap */
+ uint32_t action;
+ /* Event channel to notify */
+ uint32_t event_channel_port;
+};
+
+/* Clear (set to zero) the byte specified by index */
+#define UNMAP_NOTIFY_CLEAR_BYTE 0x1
+/* Send an interrupt on the indicated event channel */
+#define UNMAP_NOTIFY_SEND_EVENT 0x2
+
+#endif /* __LINUX_PUBLIC_GNTALLOC_H__ */
--- /dev/null
+/******************************************************************************
+ * gntdev.h
+ *
+ * Interface to /dev/xen/gntdev.
+ *
+ * Copyright (c) 2007, D G Murray
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation; or, when distributed
+ * separately from the Linux kernel or incorporated into other
+ * software packages, subject to the following license:
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this source file (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use, copy, modify,
+ * merge, publish, distribute, sublicense, and/or sell copies of the Software,
+ * and to permit persons to whom the Software is furnished to do so, subject to
+ * the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef __LINUX_PUBLIC_GNTDEV_H__
+#define __LINUX_PUBLIC_GNTDEV_H__
+
+struct ioctl_gntdev_grant_ref {
+ /* The domain ID of the grant to be mapped. */
+ uint32_t domid;
+ /* The grant reference of the grant to be mapped. */
+ uint32_t ref;
+};
+
+/*
+ * Inserts the grant references into the mapping table of an instance
+ * of gntdev. N.B. This does not perform the mapping, which is deferred
+ * until mmap() is called with @index as the offset.
+ */
+#define IOCTL_GNTDEV_MAP_GRANT_REF \
+_IOC(_IOC_NONE, 'G', 0, sizeof(struct ioctl_gntdev_map_grant_ref))
+struct ioctl_gntdev_map_grant_ref {
+ /* IN parameters */
+ /* The number of grants to be mapped. */
+ uint32_t count;
+ uint32_t pad;
+ /* OUT parameters */
+ /* The offset to be used on a subsequent call to mmap(). */
+ uint64_t index;
+ /* Variable IN parameter. */
+ /* Array of grant references, of size @count. */
+ struct ioctl_gntdev_grant_ref refs[1];
+};
+
+/*
+ * Removes the grant references from the mapping table of an instance of
+ * of gntdev. N.B. munmap() must be called on the relevant virtual address(es)
+ * before this ioctl is called, or an error will result.
+ */
+#define IOCTL_GNTDEV_UNMAP_GRANT_REF \
+_IOC(_IOC_NONE, 'G', 1, sizeof(struct ioctl_gntdev_unmap_grant_ref))
+struct ioctl_gntdev_unmap_grant_ref {
+ /* IN parameters */
+ /* The offset was returned by the corresponding map operation. */
+ uint64_t index;
+ /* The number of pages to be unmapped. */
+ uint32_t count;
+ uint32_t pad;
+};
+
+/*
+ * Returns the offset in the driver's address space that corresponds
+ * to @vaddr. This can be used to perform a munmap(), followed by an
+ * UNMAP_GRANT_REF ioctl, where no state about the offset is retained by
+ * the caller. The number of pages that were allocated at the same time as
+ * @vaddr is returned in @count.
+ *
+ * N.B. Where more than one page has been mapped into a contiguous range, the
+ * supplied @vaddr must correspond to the start of the range; otherwise
+ * an error will result. It is only possible to munmap() the entire
+ * contiguously-allocated range at once, and not any subrange thereof.
+ */
+#define IOCTL_GNTDEV_GET_OFFSET_FOR_VADDR \
+_IOC(_IOC_NONE, 'G', 2, sizeof(struct ioctl_gntdev_get_offset_for_vaddr))
+struct ioctl_gntdev_get_offset_for_vaddr {
+ /* IN parameters */
+ /* The virtual address of the first mapped page in a range. */
+ uint64_t vaddr;
+ /* OUT parameters */
+ /* The offset that was used in the initial mmap() operation. */
+ uint64_t offset;
+ /* The number of pages mapped in the VM area that begins at @vaddr. */
+ uint32_t count;
+ uint32_t pad;
+};
+
+/*
+ * Sets the maximum number of grants that may mapped at once by this gntdev
+ * instance.
+ *
+ * N.B. This must be called before any other ioctl is performed on the device.
+ */
+#define IOCTL_GNTDEV_SET_MAX_GRANTS \
+_IOC(_IOC_NONE, 'G', 3, sizeof(struct ioctl_gntdev_set_max_grants))
+struct ioctl_gntdev_set_max_grants {
+ /* IN parameter */
+ /* The maximum number of grants that may be mapped at once. */
+ uint32_t count;
+};
+
+/*
+ * Sets up an unmap notification within the page, so that the other side can do
+ * cleanup if this side crashes. Required to implement cross-domain robust
+ * mutexes or close notification on communication channels.
+ *
+ * Each mapped page only supports one notification; multiple calls referring to
+ * the same page overwrite the previous notification. You must clear the
+ * notification prior to the IOCTL_GNTALLOC_DEALLOC_GREF if you do not want it
+ * to occur.
+ */
+#define IOCTL_GNTDEV_SET_UNMAP_NOTIFY \
+_IOC(_IOC_NONE, 'G', 7, sizeof(struct ioctl_gntdev_unmap_notify))
+struct ioctl_gntdev_unmap_notify {
+ /* IN parameters */
+ /* Offset in the file descriptor for a byte within the page (same as
+ * used in mmap). If using UNMAP_NOTIFY_CLEAR_BYTE, this is the byte to
+ * be cleared. Otherwise, it can be any byte in the page whose
+ * notification we are adjusting.
+ */
+ uint64_t index;
+ /* Action(s) to take on unmap */
+ uint32_t action;
+ /* Event channel to notify */
+ uint32_t event_channel_port;
+};
+
+/* Clear (set to zero) the byte specified by index */
+#define UNMAP_NOTIFY_CLEAR_BYTE 0x1
+/* Send an interrupt on the indicated event channel */
+#define UNMAP_NOTIFY_SEND_EVENT 0x2
+
+#endif /* __LINUX_PUBLIC_GNTDEV_H__ */
+++ /dev/null
-/******************************************************************************
- * gntalloc.h
- *
- * Interface to /dev/xen/gntalloc.
- *
- * Author: Daniel De Graaf <dgdegra@tycho.nsa.gov>
- *
- * This file is in the public domain.
- */
-
-#ifndef __LINUX_PUBLIC_GNTALLOC_H__
-#define __LINUX_PUBLIC_GNTALLOC_H__
-
-/*
- * Allocates a new page and creates a new grant reference.
- */
-#define IOCTL_GNTALLOC_ALLOC_GREF \
-_IOC(_IOC_NONE, 'G', 5, sizeof(struct ioctl_gntalloc_alloc_gref))
-struct ioctl_gntalloc_alloc_gref {
- /* IN parameters */
- /* The ID of the domain to be given access to the grants. */
- uint16_t domid;
- /* Flags for this mapping */
- uint16_t flags;
- /* Number of pages to map */
- uint32_t count;
- /* OUT parameters */
- /* The offset to be used on a subsequent call to mmap(). */
- uint64_t index;
- /* The grant references of the newly created grant, one per page */
- /* Variable size, depending on count */
- uint32_t gref_ids[1];
-};
-
-#define GNTALLOC_FLAG_WRITABLE 1
-
-/*
- * Deallocates the grant reference, allowing the associated page to be freed if
- * no other domains are using it.
- */
-#define IOCTL_GNTALLOC_DEALLOC_GREF \
-_IOC(_IOC_NONE, 'G', 6, sizeof(struct ioctl_gntalloc_dealloc_gref))
-struct ioctl_gntalloc_dealloc_gref {
- /* IN parameters */
- /* The offset returned in the map operation */
- uint64_t index;
- /* Number of references to unmap */
- uint32_t count;
-};
-
-/*
- * Sets up an unmap notification within the page, so that the other side can do
- * cleanup if this side crashes. Required to implement cross-domain robust
- * mutexes or close notification on communication channels.
- *
- * Each mapped page only supports one notification; multiple calls referring to
- * the same page overwrite the previous notification. You must clear the
- * notification prior to the IOCTL_GNTALLOC_DEALLOC_GREF if you do not want it
- * to occur.
- */
-#define IOCTL_GNTALLOC_SET_UNMAP_NOTIFY \
-_IOC(_IOC_NONE, 'G', 7, sizeof(struct ioctl_gntalloc_unmap_notify))
-struct ioctl_gntalloc_unmap_notify {
- /* IN parameters */
- /* Offset in the file descriptor for a byte within the page (same as
- * used in mmap). If using UNMAP_NOTIFY_CLEAR_BYTE, this is the byte to
- * be cleared. Otherwise, it can be any byte in the page whose
- * notification we are adjusting.
- */
- uint64_t index;
- /* Action(s) to take on unmap */
- uint32_t action;
- /* Event channel to notify */
- uint32_t event_channel_port;
-};
-
-/* Clear (set to zero) the byte specified by index */
-#define UNMAP_NOTIFY_CLEAR_BYTE 0x1
-/* Send an interrupt on the indicated event channel */
-#define UNMAP_NOTIFY_SEND_EVENT 0x2
-
-#endif /* __LINUX_PUBLIC_GNTALLOC_H__ */
+++ /dev/null
-/******************************************************************************
- * gntdev.h
- *
- * Interface to /dev/xen/gntdev.
- *
- * Copyright (c) 2007, D G Murray
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation; or, when distributed
- * separately from the Linux kernel or incorporated into other
- * software packages, subject to the following license:
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this source file (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use, copy, modify,
- * merge, publish, distribute, sublicense, and/or sell copies of the Software,
- * and to permit persons to whom the Software is furnished to do so, subject to
- * the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
- * IN THE SOFTWARE.
- */
-
-#ifndef __LINUX_PUBLIC_GNTDEV_H__
-#define __LINUX_PUBLIC_GNTDEV_H__
-
-struct ioctl_gntdev_grant_ref {
- /* The domain ID of the grant to be mapped. */
- uint32_t domid;
- /* The grant reference of the grant to be mapped. */
- uint32_t ref;
-};
-
-/*
- * Inserts the grant references into the mapping table of an instance
- * of gntdev. N.B. This does not perform the mapping, which is deferred
- * until mmap() is called with @index as the offset.
- */
-#define IOCTL_GNTDEV_MAP_GRANT_REF \
-_IOC(_IOC_NONE, 'G', 0, sizeof(struct ioctl_gntdev_map_grant_ref))
-struct ioctl_gntdev_map_grant_ref {
- /* IN parameters */
- /* The number of grants to be mapped. */
- uint32_t count;
- uint32_t pad;
- /* OUT parameters */
- /* The offset to be used on a subsequent call to mmap(). */
- uint64_t index;
- /* Variable IN parameter. */
- /* Array of grant references, of size @count. */
- struct ioctl_gntdev_grant_ref refs[1];
-};
-
-/*
- * Removes the grant references from the mapping table of an instance of
- * of gntdev. N.B. munmap() must be called on the relevant virtual address(es)
- * before this ioctl is called, or an error will result.
- */
-#define IOCTL_GNTDEV_UNMAP_GRANT_REF \
-_IOC(_IOC_NONE, 'G', 1, sizeof(struct ioctl_gntdev_unmap_grant_ref))
-struct ioctl_gntdev_unmap_grant_ref {
- /* IN parameters */
- /* The offset was returned by the corresponding map operation. */
- uint64_t index;
- /* The number of pages to be unmapped. */
- uint32_t count;
- uint32_t pad;
-};
-
-/*
- * Returns the offset in the driver's address space that corresponds
- * to @vaddr. This can be used to perform a munmap(), followed by an
- * UNMAP_GRANT_REF ioctl, where no state about the offset is retained by
- * the caller. The number of pages that were allocated at the same time as
- * @vaddr is returned in @count.
- *
- * N.B. Where more than one page has been mapped into a contiguous range, the
- * supplied @vaddr must correspond to the start of the range; otherwise
- * an error will result. It is only possible to munmap() the entire
- * contiguously-allocated range at once, and not any subrange thereof.
- */
-#define IOCTL_GNTDEV_GET_OFFSET_FOR_VADDR \
-_IOC(_IOC_NONE, 'G', 2, sizeof(struct ioctl_gntdev_get_offset_for_vaddr))
-struct ioctl_gntdev_get_offset_for_vaddr {
- /* IN parameters */
- /* The virtual address of the first mapped page in a range. */
- uint64_t vaddr;
- /* OUT parameters */
- /* The offset that was used in the initial mmap() operation. */
- uint64_t offset;
- /* The number of pages mapped in the VM area that begins at @vaddr. */
- uint32_t count;
- uint32_t pad;
-};
-
-/*
- * Sets the maximum number of grants that may mapped at once by this gntdev
- * instance.
- *
- * N.B. This must be called before any other ioctl is performed on the device.
- */
-#define IOCTL_GNTDEV_SET_MAX_GRANTS \
-_IOC(_IOC_NONE, 'G', 3, sizeof(struct ioctl_gntdev_set_max_grants))
-struct ioctl_gntdev_set_max_grants {
- /* IN parameter */
- /* The maximum number of grants that may be mapped at once. */
- uint32_t count;
-};
-
-/*
- * Sets up an unmap notification within the page, so that the other side can do
- * cleanup if this side crashes. Required to implement cross-domain robust
- * mutexes or close notification on communication channels.
- *
- * Each mapped page only supports one notification; multiple calls referring to
- * the same page overwrite the previous notification. You must clear the
- * notification prior to the IOCTL_GNTALLOC_DEALLOC_GREF if you do not want it
- * to occur.
- */
-#define IOCTL_GNTDEV_SET_UNMAP_NOTIFY \
-_IOC(_IOC_NONE, 'G', 7, sizeof(struct ioctl_gntdev_unmap_notify))
-struct ioctl_gntdev_unmap_notify {
- /* IN parameters */
- /* Offset in the file descriptor for a byte within the page (same as
- * used in mmap). If using UNMAP_NOTIFY_CLEAR_BYTE, this is the byte to
- * be cleared. Otherwise, it can be any byte in the page whose
- * notification we are adjusting.
- */
- uint64_t index;
- /* Action(s) to take on unmap */
- uint32_t action;
- /* Event channel to notify */
- uint32_t event_channel_port;
-};
-
-/* Clear (set to zero) the byte specified by index */
-#define UNMAP_NOTIFY_CLEAR_BYTE 0x1
-/* Send an interrupt on the indicated event channel */
-#define UNMAP_NOTIFY_SEND_EVENT 0x2
-
-#endif /* __LINUX_PUBLIC_GNTDEV_H__ */
#define gnttab_map_vaddr(map) ((void *)(map.host_virt_addr))
int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops,
+ struct gnttab_map_grant_ref *kmap_ops,
struct page **pages, unsigned int count);
-int gnttab_map_refs_userspace(struct gnttab_map_grant_ref *map_ops,
- struct gnttab_map_grant_ref *kmap_ops,
- struct page **pages, unsigned int count);
int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops,
+ struct gnttab_map_grant_ref *kunmap_ops,
struct page **pages, unsigned int count);
-int gnttab_unmap_refs_userspace(struct gnttab_unmap_grant_ref *unmap_ops,
- struct gnttab_map_grant_ref *kunmap_ops,
- struct page **pages, unsigned int count);
/* Perform a batch of grant map/copy operations. Retry every batch slot
* for which the hypervisor returns GNTST_eagain. This is typically due
* it's less than the number provided by the backend. The indirect_grefs field
* in blkif_request_indirect should be filled by the frontend with the
* grant references of the pages that are holding the indirect segments.
- * This pages are filled with an array of blkif_request_segment_aligned
- * that hold the information about the segments. The number of indirect
- * pages to use is determined by the maximum number of segments
- * a indirect request contains. Every indirect page can contain a maximum
- * of 512 segments (PAGE_SIZE/sizeof(blkif_request_segment_aligned)),
- * so to calculate the number of indirect pages to use we have to do
- * ceil(indirect_segments/512).
+ * These pages are filled with an array of blkif_request_segment that hold the
+ * information about the segments. The number of indirect pages to use is
+ * determined by the number of segments an indirect request contains. Every
+ * indirect page can contain a maximum of
+ * (PAGE_SIZE / sizeof(struct blkif_request_segment)) segments, so to
+ * calculate the number of indirect pages to use we have to do
+ * ceil(indirect_segments / (PAGE_SIZE / sizeof(struct blkif_request_segment))).
*
* If a backend does not recognize BLKIF_OP_INDIRECT, it should *not*
* create the "feature-max-indirect-segments" node!
#define BLKIF_MAX_INDIRECT_PAGES_PER_REQUEST 8
-struct blkif_request_segment_aligned {
- grant_ref_t gref; /* reference to I/O buffer frame */
- /* @first_sect: first sector in frame to transfer (inclusive). */
- /* @last_sect: last sector in frame to transfer (inclusive). */
- uint8_t first_sect, last_sect;
- uint16_t _pad; /* padding to make it 8 bytes, so it's cache-aligned */
-} __attribute__((__packed__));
+struct blkif_request_segment {
+ grant_ref_t gref; /* reference to I/O buffer frame */
+ /* @first_sect: first sector in frame to transfer (inclusive). */
+ /* @last_sect: last sector in frame to transfer (inclusive). */
+ uint8_t first_sect, last_sect;
+};
struct blkif_request_rw {
uint8_t nr_segments; /* number of segments */
#endif
uint64_t id; /* private guest value, echoed in resp */
blkif_sector_t sector_number;/* start sector idx on disk (r/w only) */
- struct blkif_request_segment {
- grant_ref_t gref; /* reference to I/O buffer frame */
- /* @first_sect: first sector in frame to transfer (inclusive). */
- /* @last_sect: last sector in frame to transfer (inclusive). */
- uint8_t first_sect, last_sect;
- } seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
+ struct blkif_request_segment seg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
} __attribute__((__packed__));
struct blkif_request_discard {
+++ /dev/null
-/*
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to
- * deal in the Software without restriction, including without limitation the
- * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- *
- * Copyright (C) IBM Corp. 2006
- */
-
-#ifndef _XEN_XENCOMM_H_
-#define _XEN_XENCOMM_H_
-
-/* A xencomm descriptor is a scatter/gather list containing physical
- * addresses corresponding to a virtually contiguous memory area. The
- * hypervisor translates these physical addresses to machine addresses to copy
- * to and from the virtually contiguous area.
- */
-
-#define XENCOMM_MAGIC 0x58434F4D /* 'XCOM' */
-#define XENCOMM_INVALID (~0UL)
-
-struct xencomm_desc {
- uint32_t magic;
- uint32_t nr_addrs; /* the number of entries in address[] */
- uint64_t address[0];
-};
-
-#endif /* _XEN_XENCOMM_H_ */
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Copyright (C) IBM Corp. 2006
- *
- * Authors: Hollis Blanchard <hollisb@us.ibm.com>
- * Jerone Young <jyoung5@us.ibm.com>
- */
-
-#ifndef _LINUX_XENCOMM_H_
-#define _LINUX_XENCOMM_H_
-
-#include <xen/interface/xencomm.h>
-
-#define XENCOMM_MINI_ADDRS 3
-struct xencomm_mini {
- struct xencomm_desc _desc;
- uint64_t address[XENCOMM_MINI_ADDRS];
-};
-
-/* To avoid additionnal virt to phys conversion, an opaque structure is
- presented. */
-struct xencomm_handle;
-
-extern void xencomm_free(struct xencomm_handle *desc);
-extern struct xencomm_handle *xencomm_map(void *ptr, unsigned long bytes);
-extern struct xencomm_handle *__xencomm_map_no_alloc(void *ptr,
- unsigned long bytes, struct xencomm_mini *xc_area);
-
-#if 0
-#define XENCOMM_MINI_ALIGNED(xc_desc, n) \
- struct xencomm_mini xc_desc ## _base[(n)] \
- __attribute__((__aligned__(sizeof(struct xencomm_mini)))); \
- struct xencomm_mini *xc_desc = &xc_desc ## _base[0];
-#else
-/*
- * gcc bug workaround:
- * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=16660
- * gcc doesn't handle properly stack variable with
- * __attribute__((__align__(sizeof(struct xencomm_mini))))
- */
-#define XENCOMM_MINI_ALIGNED(xc_desc, n) \
- unsigned char xc_desc ## _base[((n) + 1 ) * \
- sizeof(struct xencomm_mini)]; \
- struct xencomm_mini *xc_desc = (struct xencomm_mini *) \
- ((unsigned long)xc_desc ## _base + \
- (sizeof(struct xencomm_mini) - \
- ((unsigned long)xc_desc ## _base) % \
- sizeof(struct xencomm_mini)));
-#endif
-#define xencomm_map_no_alloc(ptr, bytes) \
- ({ XENCOMM_MINI_ALIGNED(xc_desc, 1); \
- __xencomm_map_no_alloc(ptr, bytes, xc_desc); })
-
-/* provided by architecture code: */
-extern unsigned long xencomm_vtop(unsigned long vaddr);
-
-static inline void *xencomm_pa(void *ptr)
-{
- return (void *)xencomm_vtop((unsigned long)ptr);
-}
-
-#define xen_guest_handle(hnd) ((hnd).p)
-
-#endif /* _LINUX_XENCOMM_H_ */
static int run_init_process(const char *init_filename)
{
argv_init[0] = init_filename;
- return do_execve(init_filename,
+ return do_execve(getname_kernel(init_filename),
(const char __user *const __user *)argv_init,
(const char __user *const __user *)envp_init);
}
struct audit_context *context = current->audit_context;
BUG_ON(!context);
- if (!context->in_syscall) {
+ if (!name->aname || !context->in_syscall) {
#if AUDIT_DEBUG == 2
printk(KERN_ERR "%s:%d(:%d): final_putname(%p)\n",
__FILE__, __LINE__, context->serial, name);
# Generic configurable interrupt chip implementation
config GENERIC_IRQ_CHIP
bool
+ select IRQ_DOMAIN
# Generic irq_domain hw <--> linux irq number translation
config IRQ_DOMAIN
}
EXPORT_SYMBOL(devm_request_threaded_irq);
+/**
+ * devm_request_any_context_irq - allocate an interrupt line for a managed device
+ * @dev: device to request interrupt for
+ * @irq: Interrupt line to allocate
+ * @handler: Function to be called when the IRQ occurs
+ * @thread_fn: function to be called in a threaded interrupt context. NULL
+ * for devices which handle everything in @handler
+ * @irqflags: Interrupt type flags
+ * @devname: An ascii name for the claiming device
+ * @dev_id: A cookie passed back to the handler function
+ *
+ * Except for the extra @dev argument, this function takes the
+ * same arguments and performs the same function as
+ * request_any_context_irq(). IRQs requested with this function will be
+ * automatically freed on driver detach.
+ *
+ * If an IRQ allocated with this function needs to be freed
+ * separately, devm_free_irq() must be used.
+ */
+int devm_request_any_context_irq(struct device *dev, unsigned int irq,
+ irq_handler_t handler, unsigned long irqflags,
+ const char *devname, void *dev_id)
+{
+ struct irq_devres *dr;
+ int rc;
+
+ dr = devres_alloc(devm_irq_release, sizeof(struct irq_devres),
+ GFP_KERNEL);
+ if (!dr)
+ return -ENOMEM;
+
+ rc = request_any_context_irq(irq, handler, irqflags, devname, dev_id);
+ if (rc) {
+ devres_free(dr);
+ return rc;
+ }
+
+ dr->irq = irq;
+ dr->dev_id = dev_id;
+ devres_add(dev, dr);
+
+ return 0;
+}
+EXPORT_SYMBOL(devm_request_any_context_irq);
+
/**
* devm_free_irq - free an interrupt
* @dev: device to free interrupt for
{
return (irq < NR_IRQS) ? irq_desc + irq : NULL;
}
+EXPORT_SYMBOL(irq_to_desc);
static void free_desc(unsigned int irq)
{
commit_creds(new);
- retval = do_execve(sub_info->path,
+ retval = do_execve(getname_kernel(sub_info->path),
(const char __user *const __user *)sub_info->argv,
(const char __user *const __user *)sub_info->envp);
if (!retval)
next_seq = log_next_seq;
len = 0;
- prev = 0;
while (len >= 0 && seq < next_seq) {
struct printk_log *msg = log_from_idx(idx);
int textlen;
next_idx = idx;
l = 0;
- prev = 0;
while (seq < dumper->next_seq) {
struct printk_log *msg = log_from_idx(idx);
* HZ shrinks, so values greater than 8 overflow 32bits when
* HZ=100.
*/
+#if HZ < 34
+#define JIFFIES_SHIFT 6
+#elif HZ < 67
+#define JIFFIES_SHIFT 7
+#else
#define JIFFIES_SHIFT 8
+#endif
static cycle_t jiffies_read(struct clocksource *cs)
{
static void tick_broadcast_clear_oneshot(int cpu)
{
cpumask_clear_cpu(cpu, tick_broadcast_oneshot_mask);
+ cpumask_clear_cpu(cpu, tick_broadcast_pending_mask);
}
static void tick_broadcast_init_next_event(struct cpumask *mask,
write &= RB_WRITE_MASK;
tail = write - length;
+ /*
+ * If this is the first commit on the page, then it has the same
+ * timestamp as the page itself.
+ */
+ if (!tail)
+ delta = 0;
+
/* See if we shot pass the end of this buffer page */
if (unlikely(write > BUF_PAGE_SIZE))
return rb_move_tail(cpu_buffer, length, tail,
config DEBUG_INFO
bool "Compile the kernel with debug info"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && !COMPILE_TEST
help
If you say Y here the resulting kernel image will include
debugging info resulting in a larger kernel image.
obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
+GCOV_PROFILE_hweight.o := n
CFLAGS_hweight.o = $(subst $(quote),,$(CONFIG_ARCH_HWEIGHT_CFLAGS))
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
/*
* Try to steal tags from a remote cpu's percpu freelist.
*
- * We first check how many percpu freelists have tags - we don't steal tags
- * unless enough percpu freelists have tags on them that it's possible more than
- * half the total tags could be stuck on remote percpu freelists.
+ * We first check how many percpu freelists have tags
*
* Then we iterate through the cpus until we find some tags - we don't attempt
* to find the "best" cpu to steal from, to keep cacheline bouncing to a
struct percpu_ida_cpu *remote;
for (cpus_have_tags = cpumask_weight(&pool->cpus_have_tags);
- cpus_have_tags * pool->percpu_max_size > pool->nr_tags / 2;
- cpus_have_tags--) {
+ cpus_have_tags; cpus_have_tags--) {
cpu = cpumask_next(cpu, &pool->cpus_have_tags);
if (cpu >= nr_cpu_ids) {
if (ret > 0) {
ssize_t err;
- err = generic_write_sync(file, pos, ret);
- if (err < 0 && ret > 0)
+ err = generic_write_sync(file, iocb->ki_pos - ret, ret);
+ if (err < 0)
ret = err;
}
return ret;
entry = pmd_mknonnuma(entry);
entry = pmd_modify(entry, newprot);
ret = HPAGE_PMD_NR;
+ set_pmd_at(mm, addr, pmd, entry);
BUG_ON(pmd_write(entry));
} else {
struct page *page = pmd_page(*pmd);
*/
if (!is_huge_zero_page(page) &&
!pmd_numa(*pmd)) {
- entry = *pmd;
- entry = pmd_mknuma(entry);
+ pmdp_set_numa(mm, addr, pmd);
ret = HPAGE_PMD_NR;
}
}
-
- /* Set PMD if cleared earlier */
- if (ret == HPAGE_PMD_NR)
- set_pmd_at(mm, addr, pmd, entry);
-
spin_unlock(ptl);
}
* to it. Similarly, page lock is shifted.
*/
if (hpage != p) {
- put_page(hpage);
- get_page(p);
+ if (!(flags & MF_COUNT_INCREASED)) {
+ put_page(hpage);
+ get_page(p);
+ }
lock_page(p);
unlock_page(hpage);
*hpagep = p;
if (pte_numa(ptent))
ptent = pte_mknonnuma(ptent);
ptent = pte_modify(ptent, newprot);
+ /*
+ * Avoid taking write faults for pages we
+ * know to be dirty.
+ */
+ if (dirty_accountable && pte_dirty(ptent))
+ ptent = pte_mkwrite(ptent);
+ ptep_modify_prot_commit(mm, addr, pte, ptent);
updated = true;
} else {
struct page *page;
- ptent = *pte;
page = vm_normal_page(vma, addr, oldpte);
if (page && !PageKsm(page)) {
if (!pte_numa(oldpte)) {
- ptent = pte_mknuma(ptent);
- set_pte_at(mm, addr, pte, ptent);
+ ptep_set_numa(mm, addr, pte);
updated = true;
}
}
}
-
- /*
- * Avoid taking write faults for pages we know to be
- * dirty.
- */
- if (dirty_accountable && pte_dirty(ptent)) {
- ptent = pte_mkwrite(ptent);
- updated = true;
- }
-
if (updated)
pages++;
-
- /* Only !prot_numa always clears the pte */
- if (!prot_numa)
- ptep_modify_prot_commit(mm, addr, pte, ptent);
} else if (IS_ENABLED(CONFIG_MIGRATION) && !pte_file(oldpte)) {
swp_entry_t entry = pte_to_swp_entry(oldpte);
if (!TestSetPageDirty(page)) {
struct address_space *mapping = page_mapping(page);
struct address_space *mapping2;
+ unsigned long flags;
if (!mapping)
return 1;
- spin_lock_irq(&mapping->tree_lock);
+ spin_lock_irqsave(&mapping->tree_lock, flags);
mapping2 = page_mapping(page);
if (mapping2) { /* Race with truncate? */
BUG_ON(mapping2 != mapping);
radix_tree_tag_set(&mapping->page_tree,
page_index(page), PAGECACHE_TAG_DIRTY);
}
- spin_unlock_irq(&mapping->tree_lock);
+ spin_unlock_irqrestore(&mapping->tree_lock, flags);
if (mapping->host) {
/* !PageAnon && !swapper_space */
__mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
static void add_full(struct kmem_cache *s,
struct kmem_cache_node *n, struct page *page)
{
- lockdep_assert_held(&n->list_lock);
-
if (!(s->flags & SLAB_STORE_USER))
return;
+ lockdep_assert_held(&n->list_lock);
list_add(&page->lru, &n->full);
}
static void remove_full(struct kmem_cache *s, struct kmem_cache_node *n, struct page *page)
{
- lockdep_assert_held(&n->list_lock);
-
if (!(s->flags & SLAB_STORE_USER))
return;
+ lockdep_assert_held(&n->list_lock);
list_del(&page->lru);
}
/*
* Management of partially allocated slabs.
*/
-static inline void add_partial(struct kmem_cache_node *n,
- struct page *page, int tail)
+static inline void
+__add_partial(struct kmem_cache_node *n, struct page *page, int tail)
{
- lockdep_assert_held(&n->list_lock);
-
n->nr_partial++;
if (tail == DEACTIVATE_TO_TAIL)
list_add_tail(&page->lru, &n->partial);
list_add(&page->lru, &n->partial);
}
-static inline void remove_partial(struct kmem_cache_node *n,
- struct page *page)
+static inline void add_partial(struct kmem_cache_node *n,
+ struct page *page, int tail)
{
lockdep_assert_held(&n->list_lock);
+ __add_partial(n, page, tail);
+}
+static inline void
+__remove_partial(struct kmem_cache_node *n, struct page *page)
+{
list_del(&page->lru);
n->nr_partial--;
}
+static inline void remove_partial(struct kmem_cache_node *n,
+ struct page *page)
+{
+ lockdep_assert_held(&n->list_lock);
+ __remove_partial(n, page);
+}
+
/*
* Remove slab from the partial list, freeze it and
* return the pointer to the freelist.
inc_slabs_node(kmem_cache_node, node, page->objects);
/*
- * the lock is for lockdep's sake, not for any actual
- * race protection
+ * No locks need to be taken here as it has just been
+ * initialized and there is no concurrent access.
*/
- spin_lock(&n->list_lock);
- add_partial(n, page, DEACTIVATE_TO_HEAD);
- spin_unlock(&n->list_lock);
+ __add_partial(n, page, DEACTIVATE_TO_HEAD);
}
static void free_kmem_cache_nodes(struct kmem_cache *s)
list_for_each_entry_safe(page, h, &n->partial, lru) {
if (!page->inuse) {
- remove_partial(n, page);
+ __remove_partial(n, page);
discard_slab(s, page);
} else {
list_slab_objects(s, page,
return ret;
}
+static atomic_t swapin_readahead_hits = ATOMIC_INIT(4);
+
void show_swap_cache_info(void)
{
printk("%lu pages in swap cache\n", total_swapcache_pages());
page = find_get_page(swap_address_space(entry), entry.val);
- if (page)
+ if (page) {
INC_CACHE_INFO(find_success);
+ if (TestClearPageReadahead(page))
+ atomic_inc(&swapin_readahead_hits);
+ }
INC_CACHE_INFO(find_total);
return page;
return found_page;
}
+static unsigned long swapin_nr_pages(unsigned long offset)
+{
+ static unsigned long prev_offset;
+ unsigned int pages, max_pages, last_ra;
+ static atomic_t last_readahead_pages;
+
+ max_pages = 1 << ACCESS_ONCE(page_cluster);
+ if (max_pages <= 1)
+ return 1;
+
+ /*
+ * This heuristic has been found to work well on both sequential and
+ * random loads, swapping to hard disk or to SSD: please don't ask
+ * what the "+ 2" means, it just happens to work well, that's all.
+ */
+ pages = atomic_xchg(&swapin_readahead_hits, 0) + 2;
+ if (pages == 2) {
+ /*
+ * We can have no readahead hits to judge by: but must not get
+ * stuck here forever, so check for an adjacent offset instead
+ * (and don't even bother to check whether swap type is same).
+ */
+ if (offset != prev_offset + 1 && offset != prev_offset - 1)
+ pages = 1;
+ prev_offset = offset;
+ } else {
+ unsigned int roundup = 4;
+ while (roundup < pages)
+ roundup <<= 1;
+ pages = roundup;
+ }
+
+ if (pages > max_pages)
+ pages = max_pages;
+
+ /* Don't shrink readahead too fast */
+ last_ra = atomic_read(&last_readahead_pages) / 2;
+ if (pages < last_ra)
+ pages = last_ra;
+ atomic_set(&last_readahead_pages, pages);
+
+ return pages;
+}
+
/**
* swapin_readahead - swap in pages in hope we need them soon
* @entry: swap entry of this memory
struct vm_area_struct *vma, unsigned long addr)
{
struct page *page;
- unsigned long offset = swp_offset(entry);
+ unsigned long entry_offset = swp_offset(entry);
+ unsigned long offset = entry_offset;
unsigned long start_offset, end_offset;
- unsigned long mask = (1UL << page_cluster) - 1;
+ unsigned long mask;
struct blk_plug plug;
+ mask = swapin_nr_pages(offset) - 1;
+ if (!mask)
+ goto skip;
+
/* Read a page_cluster sized and aligned cluster around offset. */
start_offset = offset & ~mask;
end_offset = offset | mask;
gfp_mask, vma, addr);
if (!page)
continue;
+ if (offset != entry_offset)
+ SetPageReadahead(page);
page_cache_release(page);
}
blk_finish_plug(&plug);
lru_add_drain(); /* Push any new pages onto the LRU now */
+skip:
return read_swap_cache_async(entry, gfp_mask, vma, addr);
}
p->swap_map = NULL;
cluster_info = p->cluster_info;
p->cluster_info = NULL;
- p->flags = 0;
frontswap_map = frontswap_map_get(p);
spin_unlock(&p->lock);
spin_unlock(&swap_lock);
mutex_unlock(&inode->i_mutex);
}
filp_close(swap_file, NULL);
+
+ /*
+ * Clear the SWP_USED flag after all resources are freed so that swapon
+ * can reuse this swap_info in alloc_swap_info() safely. It is ok to
+ * not hold p->lock after we cleared its SWP_WRITEOK.
+ */
+ spin_lock(&swap_lock);
+ p->flags = 0;
+ spin_unlock(&swap_lock);
+
err = 0;
atomic_inc(&proc_poll_event);
wake_up_interruptible(&proc_poll_wait);
"thp_zero_page_alloc",
"thp_zero_page_alloc_failed",
#endif
+#ifdef CONFIG_DEBUG_TLBFLUSH
#ifdef CONFIG_SMP
"nr_tlb_remote_flush",
"nr_tlb_remote_flush_received",
-#endif
+#endif /* CONFIG_SMP */
"nr_tlb_local_flush_all",
"nr_tlb_local_flush_one",
+#endif /* CONFIG_DEBUG_TLBFLUSH */
#endif /* CONFIG_VM_EVENTS_COUNTERS */
};
return ret;
}
-struct p9_fcall *p9_fcall_alloc(int alloc_msize)
+static struct p9_fcall *p9_fcall_alloc(int alloc_msize)
{
struct p9_fcall *fc;
fc = kmalloc(sizeof(struct p9_fcall) + alloc_msize, GFP_NOFS);
int count = nr_pages;
while (nr_pages) {
s = rest_of_page(data);
- pages[index++] = kmap_to_page(data);
+ if (is_vmalloc_addr(data))
+ pages[index++] = vmalloc_to_page(data);
+ else
+ pages[index++] = kmap_to_page(data);
data += s;
nr_pages--;
}
spin_lock_bh(&br->lock);
if (!ether_addr_equal(dev->dev_addr, addr->sa_data)) {
- memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN);
- br_fdb_change_mac_address(br, addr->sa_data);
+ /* Mac address will be changed in br_stp_change_bridge_id(). */
br_stp_change_bridge_id(br, addr->sa_data);
}
spin_unlock_bh(&br->lock);
br_netpoll_disable(p);
}
+static int __br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp)
+{
+ struct netpoll *np;
+ int err;
+
+ np = kzalloc(sizeof(*p->np), gfp);
+ if (!np)
+ return -ENOMEM;
+
+ err = __netpoll_setup(np, p->dev, gfp);
+ if (err) {
+ kfree(np);
+ return err;
+ }
+
+ p->np = np;
+ return err;
+}
+
+int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp)
+{
+ if (!p->br->dev->npinfo)
+ return 0;
+
+ return __br_netpoll_enable(p, gfp);
+}
+
static int br_netpoll_setup(struct net_device *dev, struct netpoll_info *ni,
gfp_t gfp)
{
list_for_each_entry(p, &br->port_list, list) {
if (!p->dev)
continue;
- err = br_netpoll_enable(p, gfp);
+ err = __br_netpoll_enable(p, gfp);
if (err)
goto fail;
}
goto out;
}
-int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp)
-{
- struct netpoll *np;
- int err;
-
- if (!p->br->dev->npinfo)
- return 0;
-
- np = kzalloc(sizeof(*p->np), gfp);
- if (!np)
- return -ENOMEM;
-
- err = __netpoll_setup(np, p->dev, gfp);
- if (err) {
- kfree(np);
- return err;
- }
-
- p->np = np;
- return err;
-}
-
void br_netpoll_disable(struct net_bridge_port *p)
{
struct netpoll *np = p->np;
#include "br_private.h"
static struct kmem_cache *br_fdb_cache __read_mostly;
+static struct net_bridge_fdb_entry *fdb_find(struct hlist_head *head,
+ const unsigned char *addr,
+ __u16 vid);
static int fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
const unsigned char *addr, u16 vid);
static void fdb_notify(struct net_bridge *br,
call_rcu(&f->rcu, fdb_rcu_free);
}
+/* Delete a local entry if no other port had the same address. */
+static void fdb_delete_local(struct net_bridge *br,
+ const struct net_bridge_port *p,
+ struct net_bridge_fdb_entry *f)
+{
+ const unsigned char *addr = f->addr.addr;
+ u16 vid = f->vlan_id;
+ struct net_bridge_port *op;
+
+ /* Maybe another port has same hw addr? */
+ list_for_each_entry(op, &br->port_list, list) {
+ if (op != p && ether_addr_equal(op->dev->dev_addr, addr) &&
+ (!vid || nbp_vlan_find(op, vid))) {
+ f->dst = op;
+ f->added_by_user = 0;
+ return;
+ }
+ }
+
+ /* Maybe bridge device has same hw addr? */
+ if (p && ether_addr_equal(br->dev->dev_addr, addr) &&
+ (!vid || br_vlan_find(br, vid))) {
+ f->dst = NULL;
+ f->added_by_user = 0;
+ return;
+ }
+
+ fdb_delete(br, f);
+}
+
+void br_fdb_find_delete_local(struct net_bridge *br,
+ const struct net_bridge_port *p,
+ const unsigned char *addr, u16 vid)
+{
+ struct hlist_head *head = &br->hash[br_mac_hash(addr, vid)];
+ struct net_bridge_fdb_entry *f;
+
+ spin_lock_bh(&br->hash_lock);
+ f = fdb_find(head, addr, vid);
+ if (f && f->is_local && !f->added_by_user && f->dst == p)
+ fdb_delete_local(br, p, f);
+ spin_unlock_bh(&br->hash_lock);
+}
+
void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr)
{
struct net_bridge *br = p->br;
- bool no_vlan = (nbp_get_vlan_info(p) == NULL) ? true : false;
+ struct net_port_vlans *pv = nbp_get_vlan_info(p);
+ bool no_vlan = !pv;
int i;
+ u16 vid;
spin_lock_bh(&br->hash_lock);
struct net_bridge_fdb_entry *f;
f = hlist_entry(h, struct net_bridge_fdb_entry, hlist);
- if (f->dst == p && f->is_local) {
- /* maybe another port has same hw addr? */
- struct net_bridge_port *op;
- u16 vid = f->vlan_id;
- list_for_each_entry(op, &br->port_list, list) {
- if (op != p &&
- ether_addr_equal(op->dev->dev_addr,
- f->addr.addr) &&
- nbp_vlan_find(op, vid)) {
- f->dst = op;
- goto insert;
- }
- }
-
+ if (f->dst == p && f->is_local && !f->added_by_user) {
/* delete old one */
- fdb_delete(br, f);
-insert:
- /* insert new address, may fail if invalid
- * address or dup.
- */
- fdb_insert(br, p, newaddr, vid);
+ fdb_delete_local(br, p, f);
/* if this port has no vlan information
* configured, we can safely be done at
* this point.
*/
if (no_vlan)
- goto done;
+ goto insert;
}
}
}
+insert:
+ /* insert new address, may fail if invalid address or dup. */
+ fdb_insert(br, p, newaddr, 0);
+
+ if (no_vlan)
+ goto done;
+
+ /* Now add entries for every VLAN configured on the port.
+ * This function runs under RTNL so the bitmap will not change
+ * from under us.
+ */
+ for_each_set_bit(vid, pv->vlan_bitmap, VLAN_N_VID)
+ fdb_insert(br, p, newaddr, vid);
+
done:
spin_unlock_bh(&br->hash_lock);
}
struct net_port_vlans *pv;
u16 vid = 0;
+ spin_lock_bh(&br->hash_lock);
+
/* If old entry was unassociated with any port, then delete it. */
f = __br_fdb_get(br, br->dev->dev_addr, 0);
if (f && f->is_local && !f->dst)
- fdb_delete(br, f);
+ fdb_delete_local(br, NULL, f);
fdb_insert(br, NULL, newaddr, 0);
*/
pv = br_get_vlan_info(br);
if (!pv)
- return;
+ goto out;
for_each_set_bit_from(vid, pv->vlan_bitmap, VLAN_N_VID) {
f = __br_fdb_get(br, br->dev->dev_addr, vid);
if (f && f->is_local && !f->dst)
- fdb_delete(br, f);
+ fdb_delete_local(br, NULL, f);
fdb_insert(br, NULL, newaddr, vid);
}
+out:
+ spin_unlock_bh(&br->hash_lock);
}
void br_fdb_cleanup(unsigned long _data)
if (f->is_static && !do_all)
continue;
- /*
- * if multiple ports all have the same device address
- * then when one port is deleted, assign
- * the local entry to other port
- */
- if (f->is_local) {
- struct net_bridge_port *op;
- list_for_each_entry(op, &br->port_list, list) {
- if (op != p &&
- ether_addr_equal(op->dev->dev_addr,
- f->addr.addr)) {
- f->dst = op;
- goto skip_delete;
- }
- }
- }
- fdb_delete(br, f);
- skip_delete: ;
+ if (f->is_local)
+ fdb_delete_local(br, p, f);
+ else
+ fdb_delete(br, f);
}
}
spin_unlock_bh(&br->hash_lock);
fdb->vlan_id = vid;
fdb->is_local = 0;
fdb->is_static = 0;
+ fdb->added_by_user = 0;
fdb->updated = fdb->used = jiffies;
hlist_add_head_rcu(&fdb->hlist, head);
}
}
void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source,
- const unsigned char *addr, u16 vid)
+ const unsigned char *addr, u16 vid, bool added_by_user)
{
struct hlist_head *head = &br->hash[br_mac_hash(addr, vid)];
struct net_bridge_fdb_entry *fdb;
/* fastpath: update of existing entry */
fdb->dst = source;
fdb->updated = jiffies;
+ if (unlikely(added_by_user))
+ fdb->added_by_user = 1;
}
} else {
spin_lock(&br->hash_lock);
if (likely(!fdb_find(head, addr, vid))) {
fdb = fdb_create(head, source, addr, vid);
- if (fdb)
+ if (fdb) {
+ if (unlikely(added_by_user))
+ fdb->added_by_user = 1;
fdb_notify(br, fdb, RTM_NEWNEIGH);
+ }
}
/* else we lose race and someone else inserts
* it first, don't bother updating
modified = true;
}
+ fdb->added_by_user = 1;
fdb->used = jiffies;
if (modified) {
if (ndm->ndm_flags & NTF_USE) {
rcu_read_lock();
- br_fdb_update(p->br, p, addr, vid);
+ br_fdb_update(p->br, p, addr, vid, true);
rcu_read_unlock();
} else {
spin_lock_bh(&p->br->hash_lock);
return err;
}
-int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr,
- u16 vlan)
+static int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr, u16 vlan)
{
struct hlist_head *head = &br->hash[br_mac_hash(addr, vlan)];
struct net_bridge_fdb_entry *fdb;
if (br->dev->needed_headroom < dev->needed_headroom)
br->dev->needed_headroom = dev->needed_headroom;
+ if (br_fdb_insert(br, p, dev->dev_addr, 0))
+ netdev_err(dev, "failed insert local address bridge forwarding table\n");
+
spin_lock_bh(&br->lock);
changed_addr = br_stp_recalculate_bridge_id(br);
dev_set_mtu(br->dev, br_min_mtu(br));
- if (br_fdb_insert(br, p, dev->dev_addr, 0))
- netdev_err(dev, "failed insert local address bridge forwarding table\n");
-
kobject_uevent(&p->kobj, KOBJ_ADD);
return 0;
/* insert into forwarding database after filtering to avoid spoofing */
br = p->br;
if (p->flags & BR_LEARNING)
- br_fdb_update(br, p, eth_hdr(skb)->h_source, vid);
+ br_fdb_update(br, p, eth_hdr(skb)->h_source, vid, false);
if (!is_broadcast_ether_addr(dest) && is_multicast_ether_addr(dest) &&
br_multicast_rcv(br, p, skb, vid))
br_vlan_get_tag(skb, &vid);
if (p->flags & BR_LEARNING)
- br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid);
+ br_fdb_update(p->br, p, eth_hdr(skb)->h_source, vid, false);
return 0; /* process further */
}
mac_addr addr;
unsigned char is_local;
unsigned char is_static;
+ unsigned char added_by_user;
__u16 vlan_id;
};
int br_fdb_init(void);
void br_fdb_fini(void);
void br_fdb_flush(struct net_bridge *br);
+void br_fdb_find_delete_local(struct net_bridge *br,
+ const struct net_bridge_port *p,
+ const unsigned char *addr, u16 vid);
void br_fdb_changeaddr(struct net_bridge_port *p, const unsigned char *newaddr);
void br_fdb_change_mac_address(struct net_bridge *br, const u8 *newaddr);
void br_fdb_cleanup(unsigned long arg);
int br_fdb_insert(struct net_bridge *br, struct net_bridge_port *source,
const unsigned char *addr, u16 vid);
void br_fdb_update(struct net_bridge *br, struct net_bridge_port *source,
- const unsigned char *addr, u16 vid);
-int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr, u16 vid);
+ const unsigned char *addr, u16 vid, bool added_by_user);
int br_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[],
struct net_device *dev, const unsigned char *addr);
int br_vlan_add(struct net_bridge *br, u16 vid, u16 flags);
int br_vlan_delete(struct net_bridge *br, u16 vid);
void br_vlan_flush(struct net_bridge *br);
+bool br_vlan_find(struct net_bridge *br, u16 vid);
int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val);
int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags);
int nbp_vlan_delete(struct net_bridge_port *port, u16 vid);
{
}
+static inline bool br_vlan_find(struct net_bridge *br, u16 vid)
+{
+ return false;
+}
+
static inline int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags)
{
return -EOPNOTSUPP;
wasroot = br_is_root_bridge(br);
+ br_fdb_change_mac_address(br, addr);
+
memcpy(oldaddr, br->bridge_id.addr, ETH_ALEN);
memcpy(br->bridge_id.addr, addr, ETH_ALEN);
memcpy(br->dev->dev_addr, addr, ETH_ALEN);
if (!pv)
return -EINVAL;
- spin_lock_bh(&br->hash_lock);
- fdb_delete_by_addr(br, br->dev->dev_addr, vid);
- spin_unlock_bh(&br->hash_lock);
+ br_fdb_find_delete_local(br, NULL, br->dev->dev_addr, vid);
__vlan_del(pv, vid);
return 0;
__vlan_flush(pv);
}
+bool br_vlan_find(struct net_bridge *br, u16 vid)
+{
+ struct net_port_vlans *pv;
+ bool found = false;
+
+ rcu_read_lock();
+ pv = rcu_dereference(br->vlan_info);
+
+ if (!pv)
+ goto out;
+
+ if (test_bit(vid, pv->vlan_bitmap))
+ found = true;
+
+out:
+ rcu_read_unlock();
+ return found;
+}
+
int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val)
{
if (!rtnl_trylock())
if (!pv)
return -EINVAL;
- spin_lock_bh(&port->br->hash_lock);
- fdb_delete_by_addr(port->br, port->dev->dev_addr, vid);
- spin_unlock_bh(&port->br->hash_lock);
+ br_fdb_find_delete_local(port->br, port, port->dev->dev_addr, vid);
return __vlan_del(pv, vid);
}
#include <net/pkt_sched.h>
#include <net/caif/caif_device.h>
#include <net/caif/caif_layer.h>
+#include <net/caif/caif_dev.h>
#include <net/caif/cfpkt.h>
#include <net/caif/cfcnfg.h>
#include <net/caif/cfserl.h>
#include <net/caif/caif_layer.h>
#include <net/caif/cfsrvl.h>
#include <net/caif/cfpkt.h>
+#include <net/caif/caif_dev.h>
#define SRVL_CTRL_PKT_SIZE 1
#define SRVL_FLOW_OFF 0x81
#include <linux/skbuff.h>
#include <linux/can.h>
#include <linux/can/core.h>
+#include <linux/can/skb.h>
#include <linux/ratelimit.h>
#include <net/net_namespace.h>
#include <net/sock.h>
return -ENOMEM;
}
- newskb->sk = skb->sk;
+ can_skb_set_owner(newskb, skb->sk);
newskb->ip_summed = CHECKSUM_UNNECESSARY;
newskb->pkt_type = PACKET_BROADCAST;
}
/* send with loopback */
skb->dev = dev;
- skb->sk = op->sk;
+ can_skb_set_owner(skb, op->sk);
can_send(skb, 1);
/* update statistics */
can_skb_prv(skb)->ifindex = dev->ifindex;
skb->dev = dev;
- skb->sk = sk;
+ can_skb_set_owner(skb, sk);
err = can_send(skb, 1); /* send with loopback */
dev_put(dev);
skb->dev = dev;
skb->sk = sk;
+ skb->priority = sk->sk_priority;
err = can_send(skb, ro->loopback);
if (!cursor->bvec_iter.bi_size) {
bio = bio->bi_next;
- cursor->bvec_iter = bio->bi_iter;
+ cursor->bio = bio;
+ if (bio)
+ cursor->bvec_iter = bio->bi_iter;
+ else
+ memset(&cursor->bvec_iter, 0,
+ sizeof(cursor->bvec_iter));
}
- cursor->bio = bio;
if (!cursor->last_piece) {
BUG_ON(!cursor->resid);
__send_request(osdc, req);
}
+/*
+ * Caller should hold map_sem for read and request_mutex.
+ */
+static int __ceph_osdc_start_request(struct ceph_osd_client *osdc,
+ struct ceph_osd_request *req,
+ bool nofail)
+{
+ int rc;
+
+ __register_request(osdc, req);
+ req->r_sent = 0;
+ req->r_got_reply = 0;
+ rc = __map_request(osdc, req, 0);
+ if (rc < 0) {
+ if (nofail) {
+ dout("osdc_start_request failed map, "
+ " will retry %lld\n", req->r_tid);
+ rc = 0;
+ } else {
+ __unregister_request(osdc, req);
+ }
+ return rc;
+ }
+
+ if (req->r_osd == NULL) {
+ dout("send_request %p no up osds in pg\n", req);
+ ceph_monc_request_next_osdmap(&osdc->client->monc);
+ } else {
+ __send_queued(osdc);
+ }
+
+ return 0;
+}
+
/*
* Timeout callback, called every N seconds when 1 or more osd
* requests has been active for more than N seconds. When this
osdmap_epoch = ceph_decode_32(&p);
/* lookup */
+ down_read(&osdc->map_sem);
mutex_lock(&osdc->request_mutex);
req = __lookup_request(osdc, tid);
if (req == NULL) {
dout("redirect pool %lld\n", redir.oloc.pool);
__unregister_request(osdc, req);
- mutex_unlock(&osdc->request_mutex);
req->r_target_oloc = redir.oloc; /* struct */
* successfully. In the future we might want to follow
* original request's nofail setting here.
*/
- err = ceph_osdc_start_request(osdc, req, true);
+ err = __ceph_osdc_start_request(osdc, req, true);
BUG_ON(err);
- goto done;
+ goto out_unlock;
}
already_completed = req->r_got_reply;
req->r_got_reply = 1;
} else if ((flags & CEPH_OSD_FLAG_ONDISK) == 0) {
dout("handle_reply tid %llu dup ack\n", tid);
- mutex_unlock(&osdc->request_mutex);
- goto done;
+ goto out_unlock;
}
dout("handle_reply tid %llu flags %d\n", tid, flags);
__unregister_request(osdc, req);
mutex_unlock(&osdc->request_mutex);
+ up_read(&osdc->map_sem);
if (!already_completed) {
if (req->r_unsafe_callback &&
complete_request(req);
}
-done:
+out:
dout("req=%p req->r_linger=%d\n", req, req->r_linger);
ceph_osdc_put_request(req);
return;
+out_unlock:
+ mutex_unlock(&osdc->request_mutex);
+ up_read(&osdc->map_sem);
+ goto out;
bad_put:
req->r_result = -EIO;
ceph_osdc_put_request(req);
bad_mutex:
mutex_unlock(&osdc->request_mutex);
+ up_read(&osdc->map_sem);
bad:
pr_err("corrupt osd_op_reply got %d %d\n",
(int)msg->front.iov_len, le32_to_cpu(msg->hdr.front_len));
struct ceph_osd_request *req,
bool nofail)
{
- int rc = 0;
+ int rc;
down_read(&osdc->map_sem);
mutex_lock(&osdc->request_mutex);
- __register_request(osdc, req);
- req->r_sent = 0;
- req->r_got_reply = 0;
- rc = __map_request(osdc, req, 0);
- if (rc < 0) {
- if (nofail) {
- dout("osdc_start_request failed map, "
- " will retry %lld\n", req->r_tid);
- rc = 0;
- } else {
- __unregister_request(osdc, req);
- }
- goto out_unlock;
- }
- if (req->r_osd == NULL) {
- dout("send_request %p no up osds in pg\n", req);
- ceph_monc_request_next_osdmap(&osdc->client->monc);
- } else {
- __send_queued(osdc);
- }
- rc = 0;
-out_unlock:
+
+ rc = __ceph_osdc_start_request(osdc, req, nofail);
+
mutex_unlock(&osdc->request_mutex);
up_read(&osdc->map_sem);
+
return rc;
}
EXPORT_SYMBOL(ceph_osdc_start_request);
err = -ENOMEM;
osdc->notify_wq = create_singlethread_workqueue("ceph-watch-notify");
if (!osdc->notify_wq)
- goto out_msgpool;
+ goto out_msgpool_reply;
+
return 0;
+out_msgpool_reply:
+ ceph_msgpool_destroy(&osdc->msgpool_op_reply);
out_msgpool:
ceph_msgpool_destroy(&osdc->msgpool_op);
out_mempool:
* the BH enable code must have IRQs enabled so that it will not deadlock.
* --BLG
*/
-int __dev_queue_xmit(struct sk_buff *skb, void *accel_priv)
+static int __dev_queue_xmit(struct sk_buff *skb, void *accel_priv)
{
struct net_device *dev = skb->dev;
struct netdev_queue *txq;
}
EXPORT_SYMBOL(netdev_master_upper_dev_get_rcu);
-int netdev_adjacent_sysfs_add(struct net_device *dev,
+static int netdev_adjacent_sysfs_add(struct net_device *dev,
struct net_device *adj_dev,
struct list_head *dev_list)
{
return sysfs_create_link(&(dev->dev.kobj), &(adj_dev->dev.kobj),
linkname);
}
-void netdev_adjacent_sysfs_del(struct net_device *dev,
+static void netdev_adjacent_sysfs_del(struct net_device *dev,
char *name,
struct list_head *dev_list)
{
attach_rules(&ops->rules_list, dev);
break;
+ case NETDEV_CHANGENAME:
+ list_for_each_entry(ops, &net->rules_ops, list) {
+ detach_rules(&ops->rules_list, dev);
+ attach_rules(&ops->rules_list, dev);
+ }
+ break;
+
case NETDEV_UNREGISTER:
list_for_each_entry(ops, &net->rules_ops, list)
detach_rules(&ops->rules_list, dev);
{
char *cur=opt, *delim;
int ipv6;
+ bool ipversion_set = false;
if (*cur != '@') {
if ((delim = strchr(cur, '@')) == NULL)
cur++;
if (*cur != '/') {
+ ipversion_set = true;
if ((delim = strchr(cur, '/')) == NULL)
goto parse_failed;
*delim = 0;
ipv6 = netpoll_parse_ip_addr(cur, &np->remote_ip);
if (ipv6 < 0)
goto parse_failed;
- else if (np->ipv6 != (bool)ipv6)
+ else if (ipversion_set && np->ipv6 != (bool)ipv6)
goto parse_failed;
else
np->ipv6 = (bool)ipv6;
if (!master_dev)
return 0;
ops = master_dev->rtnl_link_ops;
- if (!ops->get_slave_size)
+ if (!ops || !ops->get_slave_size)
return 0;
/* IFLA_INFO_SLAVE_DATA + nested data */
return nla_total_size(sizeof(struct nlattr)) +
while (order) {
if (npages >= 1 << order) {
page = alloc_pages(sk->sk_allocation |
- __GFP_COMP | __GFP_NOWARN,
+ __GFP_COMP |
+ __GFP_NOWARN |
+ __GFP_NORETRY,
order);
if (page)
goto fill_page;
gfp_t gfp = prio;
if (order)
- gfp |= __GFP_COMP | __GFP_NOWARN;
+ gfp |= __GFP_COMP | __GFP_NOWARN | __GFP_NORETRY;
pfrag->page = alloc_pages(gfp, order);
if (likely(pfrag->page)) {
pfrag->offset = 0;
.notifier_call = dn_device_event,
};
-extern int dn_route_rcv(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *);
-
static struct packet_type dn_dix_packet_type __read_mostly = {
.type = cpu_to_be16(ETH_P_DNA_RT),
.func = dn_route_rcv,
.sendpage = sock_no_sendpage,
};
-void dn_register_sysctl(void);
-void dn_unregister_sysctl(void);
-
MODULE_DESCRIPTION("The Linux DECnet Network Protocol");
MODULE_AUTHOR("Linux DECnet Project Team");
MODULE_LICENSE("GPL");
unsigned short type, const void *_daddr,
const void *_saddr, unsigned int len)
{
- struct ipv6hdr *hdr;
const u8 *saddr = _saddr;
const u8 *daddr = _daddr;
struct ieee802154_addr sa, da;
if (type != ETH_P_IPV6)
return 0;
- hdr = ipv6_hdr(skb);
-
if (!saddr)
saddr = dev->dev_addr;
.create = lowpan_header_create,
};
+static struct lock_class_key lowpan_tx_busylock;
+static struct lock_class_key lowpan_netdev_xmit_lock_key;
+
+static void lowpan_set_lockdep_class_one(struct net_device *dev,
+ struct netdev_queue *txq,
+ void *_unused)
+{
+ lockdep_set_class(&txq->_xmit_lock,
+ &lowpan_netdev_xmit_lock_key);
+}
+
+
+static int lowpan_dev_init(struct net_device *dev)
+{
+ netdev_for_each_tx_queue(dev, lowpan_set_lockdep_class_one, NULL);
+ dev->qdisc_tx_busylock = &lowpan_tx_busylock;
+ return 0;
+}
+
static const struct net_device_ops lowpan_netdev_ops = {
+ .ndo_init = lowpan_dev_init,
.ndo_start_xmit = lowpan_xmit,
.ndo_set_mac_address = lowpan_set_address,
};
+ nla_total_size(4) /* IFA_LOCAL */
+ nla_total_size(4) /* IFA_BROADCAST */
+ nla_total_size(IFNAMSIZ) /* IFA_LABEL */
- + nla_total_size(4); /* IFA_FLAGS */
+ + nla_total_size(4) /* IFA_FLAGS */
+ + nla_total_size(sizeof(struct ifa_cacheinfo)); /* IFA_CACHEINFO */
}
static inline u32 cstamp_delta(unsigned long cstamp)
__tunnel_dst_set(per_cpu_ptr(t->dst_cache, i), NULL);
}
-static struct dst_entry *tunnel_dst_get(struct ip_tunnel *t)
+static struct rtable *tunnel_rtable_get(struct ip_tunnel *t, u32 cookie)
{
struct dst_entry *dst;
rcu_read_lock();
dst = rcu_dereference(this_cpu_ptr(t->dst_cache)->dst);
- if (dst)
+ if (dst) {
+ if (dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
+ rcu_read_unlock();
+ tunnel_dst_reset(t);
+ return NULL;
+ }
dst_hold(dst);
- rcu_read_unlock();
- return dst;
-}
-
-static struct dst_entry *tunnel_dst_check(struct ip_tunnel *t, u32 cookie)
-{
- struct dst_entry *dst = tunnel_dst_get(t);
-
- if (dst && dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
- tunnel_dst_reset(t);
- return NULL;
}
-
- return dst;
+ rcu_read_unlock();
+ return (struct rtable *)dst;
}
/* Often modified stats are per cpu, other are shared (netdev->stats) */
struct flowi4 fl4;
u8 tos, ttl;
__be16 df;
- struct rtable *rt = NULL; /* Route to the other host */
+ struct rtable *rt; /* Route to the other host */
unsigned int max_headroom; /* The extra header space needed */
__be32 dst;
int err;
init_tunnel_flow(&fl4, protocol, dst, tnl_params->saddr,
tunnel->parms.o_key, RT_TOS(tos), tunnel->parms.link);
- if (connected)
- rt = (struct rtable *)tunnel_dst_check(tunnel, 0);
+ rt = connected ? tunnel_rtable_get(tunnel, 0) : NULL;
if (!rt) {
rt = ip_route_output_key(tunnel->net, &fl4);
packet transformations such as the source, destination address and
source and destination ports.
+config NFT_REJECT_IPV4
+ depends on NF_TABLES_IPV4
+ default NFT_REJECT
+ tristate
+
config NF_TABLES_ARP
depends on NF_TABLES
tristate "ARP nf_tables support"
obj-$(CONFIG_NF_TABLES_IPV4) += nf_tables_ipv4.o
obj-$(CONFIG_NFT_CHAIN_ROUTE_IPV4) += nft_chain_route_ipv4.o
obj-$(CONFIG_NFT_CHAIN_NAT_IPV4) += nft_chain_nat_ipv4.o
+obj-$(CONFIG_NFT_REJECT_IPV4) += nft_reject_ipv4.o
obj-$(CONFIG_NF_TABLES_ARP) += nf_tables_arp.o
# generic IP tables
ret = nf_ct_expect_related(rtcp_exp);
if (ret == 0)
break;
- else if (ret != -EBUSY) {
+ else if (ret == -EBUSY) {
+ nf_ct_unexpect_related(rtp_exp);
+ continue;
+ } else if (ret < 0) {
nf_ct_unexpect_related(rtp_exp);
nated_port = 0;
break;
--- /dev/null
+/*
+ * Copyright (c) 2008-2009 Patrick McHardy <kaber@trash.net>
+ * Copyright (c) 2013 Eric Leblond <eric@regit.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Development of this code funded by Astaro AG (http://www.astaro.com/)
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/netlink.h>
+#include <linux/netfilter.h>
+#include <linux/netfilter/nf_tables.h>
+#include <net/netfilter/nf_tables.h>
+#include <net/icmp.h>
+#include <net/netfilter/ipv4/nf_reject.h>
+#include <net/netfilter/nft_reject.h>
+
+void nft_reject_ipv4_eval(const struct nft_expr *expr,
+ struct nft_data data[NFT_REG_MAX + 1],
+ const struct nft_pktinfo *pkt)
+{
+ struct nft_reject *priv = nft_expr_priv(expr);
+
+ switch (priv->type) {
+ case NFT_REJECT_ICMP_UNREACH:
+ nf_send_unreach(pkt->skb, priv->icmp_code);
+ break;
+ case NFT_REJECT_TCP_RST:
+ nf_send_reset(pkt->skb, pkt->ops->hooknum);
+ break;
+ }
+
+ data[NFT_REG_VERDICT].verdict = NF_DROP;
+}
+EXPORT_SYMBOL_GPL(nft_reject_ipv4_eval);
+
+static struct nft_expr_type nft_reject_ipv4_type;
+static const struct nft_expr_ops nft_reject_ipv4_ops = {
+ .type = &nft_reject_ipv4_type,
+ .size = NFT_EXPR_SIZE(sizeof(struct nft_reject)),
+ .eval = nft_reject_ipv4_eval,
+ .init = nft_reject_init,
+ .dump = nft_reject_dump,
+};
+
+static struct nft_expr_type nft_reject_ipv4_type __read_mostly = {
+ .family = NFPROTO_IPV4,
+ .name = "reject",
+ .ops = &nft_reject_ipv4_ops,
+ .policy = nft_reject_policy,
+ .maxattr = NFTA_REJECT_MAX,
+ .owner = THIS_MODULE,
+};
+
+static int __init nft_reject_ipv4_module_init(void)
+{
+ return nft_register_expr(&nft_reject_ipv4_type);
+}
+
+static void __exit nft_reject_ipv4_module_exit(void)
+{
+ nft_unregister_expr(&nft_reject_ipv4_type);
+}
+
+module_init(nft_reject_ipv4_module_init);
+module_exit(nft_reject_ipv4_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Patrick McHardy <kaber@trash.net>");
+MODULE_ALIAS_NFT_AF_EXPR(AF_INET, "reject");
/* This is a (useful) BSD violating of the RFC. There is a
* problem with TCP as specified in that the other end could
* keep a socket open forever with no application left this end.
- * We use a 3 minute timeout (about the same as BSD) then kill
+ * We use a 1 minute timeout (about the same as BSD) then kill
* our end. If they send after that then tough - BUT: long enough
* that we won't make the old 4*rto = almost no time - whoops
* reset mistake.
{
struct tcp_sock *tp = tcp_sk(sk);
long m = mrtt; /* RTT */
+ u32 srtt = tp->srtt;
/* The following amusing code comes from Jacobson's
* article in SIGCOMM '88. Note that rtt and mdev
* does not matter how to _calculate_ it. Seems, it was trap
* that VJ failed to avoid. 8)
*/
- if (m == 0)
- m = 1;
- if (tp->srtt != 0) {
- m -= (tp->srtt >> 3); /* m is now error in rtt est */
- tp->srtt += m; /* rtt = 7/8 rtt + 1/8 new */
+ if (srtt != 0) {
+ m -= (srtt >> 3); /* m is now error in rtt est */
+ srtt += m; /* rtt = 7/8 rtt + 1/8 new */
if (m < 0) {
m = -m; /* m is now abs(error) */
m -= (tp->mdev >> 2); /* similar update on mdev */
}
} else {
/* no previous measure. */
- tp->srtt = m << 3; /* take the measured time to be rtt */
+ srtt = m << 3; /* take the measured time to be rtt */
tp->mdev = m << 1; /* make sure rto = 3*rtt */
tp->mdev_max = tp->rttvar = max(tp->mdev, tcp_rto_min(sk));
tp->rtt_seq = tp->snd_nxt;
}
+ tp->srtt = max(1U, srtt);
}
/* Set the sk_pacing_rate to allow proper sizing of TSO packets.
rate *= max(tp->snd_cwnd, tp->packets_out);
- /* Correction for small srtt : minimum srtt being 8 (1 jiffy << 3),
- * be conservative and assume srtt = 1 (125 us instead of 1.25 ms)
+ /* Correction for small srtt and scheduling constraints.
+ * For small rtt, consider noise is too high, and use
+ * the minimal value (srtt = 1 -> 125 us for HZ=1000)
+ *
* We probably need usec resolution in the future.
* Note: This also takes care of possible srtt=0 case,
* when tcp_rtt_estimator() was not yet called.
if ((1 << sk->sk_state) &
(TCPF_ESTABLISHED | TCPF_FIN_WAIT1 | TCPF_CLOSING |
TCPF_CLOSE_WAIT | TCPF_LAST_ACK))
- tcp_write_xmit(sk, tcp_current_mss(sk), 0, 0, GFP_ATOMIC);
+ tcp_write_xmit(sk, tcp_current_mss(sk), tcp_sk(sk)->nonagle,
+ 0, GFP_ATOMIC);
}
/*
* One tasklet per cpu tries to send more skbs.
if (atomic_read(&sk->sk_wmem_alloc) > limit) {
set_bit(TSQ_THROTTLED, &tp->tsq_flags);
- break;
+ /* It is possible TX completion already happened
+ * before we set TSQ_THROTTLED, so we must
+ * test again the condition.
+ * We abuse smp_mb__after_clear_bit() because
+ * there is no smp_mb__after_set_bit() yet
+ */
+ smp_mb__after_clear_bit();
+ if (atomic_read(&sk->sk_wmem_alloc) > limit)
+ break;
}
limit = mss_now;
/* Schedule a loss probe in 2*RTT for SACK capable connections
* in Open state, that are either limited by cwnd or application.
*/
- if (sysctl_tcp_early_retrans < 3 || !rtt || !tp->packets_out ||
+ if (sysctl_tcp_early_retrans < 3 || !tp->srtt || !tp->packets_out ||
!tcp_is_sack(tp) || inet_csk(sk)->icsk_ca_state != TCP_CA_Open)
return false;
static DEFINE_SPINLOCK(udp_offload_lock);
static struct udp_offload_priv __rcu *udp_offload_base __read_mostly;
+#define udp_deref_protected(X) rcu_dereference_protected(X, lockdep_is_held(&udp_offload_lock))
+
struct udp_offload_priv {
struct udp_offload *offload;
struct rcu_head rcu;
int udp_add_offload(struct udp_offload *uo)
{
- struct udp_offload_priv __rcu **head = &udp_offload_base;
- struct udp_offload_priv *new_offload = kzalloc(sizeof(*new_offload), GFP_KERNEL);
+ struct udp_offload_priv *new_offload = kzalloc(sizeof(*new_offload), GFP_ATOMIC);
if (!new_offload)
return -ENOMEM;
new_offload->offload = uo;
spin_lock(&udp_offload_lock);
- rcu_assign_pointer(new_offload->next, rcu_dereference(*head));
- rcu_assign_pointer(*head, new_offload);
+ new_offload->next = udp_offload_base;
+ rcu_assign_pointer(udp_offload_base, new_offload);
spin_unlock(&udp_offload_lock);
return 0;
spin_lock(&udp_offload_lock);
- uo_priv = rcu_dereference(*head);
+ uo_priv = udp_deref_protected(*head);
for (; uo_priv != NULL;
- uo_priv = rcu_dereference(*head)) {
-
+ uo_priv = udp_deref_protected(*head)) {
if (uo_priv->offload == uo) {
- rcu_assign_pointer(*head, rcu_dereference(uo_priv->next));
+ rcu_assign_pointer(*head,
+ udp_deref_protected(uo_priv->next));
goto unlock;
}
head = &uo_priv->next;
addr_type = ipv6_addr_type(&hdr->daddr);
if (ipv6_chk_addr(net, &hdr->daddr, skb->dev, 0) ||
- ipv6_anycast_destination(skb))
+ ipv6_chk_acast_addr_src(net, skb->dev, &hdr->daddr))
saddr = &hdr->daddr;
/*
packet transformations such as the source, destination address and
source and destination ports.
+config NFT_REJECT_IPV6
+ depends on NF_TABLES_IPV6
+ default NFT_REJECT
+ tristate
+
config IP6_NF_IPTABLES
tristate "IP6 tables support (required for filtering)"
depends on INET && IPV6
obj-$(CONFIG_NF_TABLES_IPV6) += nf_tables_ipv6.o
obj-$(CONFIG_NFT_CHAIN_ROUTE_IPV6) += nft_chain_route_ipv6.o
obj-$(CONFIG_NFT_CHAIN_NAT_IPV6) += nft_chain_nat_ipv6.o
+obj-$(CONFIG_NFT_REJECT_IPV6) += nft_reject_ipv6.o
# matches
obj-$(CONFIG_IP6_NF_MATCH_AH) += ip6t_ah.o
--- /dev/null
+/*
+ * Copyright (c) 2008-2009 Patrick McHardy <kaber@trash.net>
+ * Copyright (c) 2013 Eric Leblond <eric@regit.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Development of this code funded by Astaro AG (http://www.astaro.com/)
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/netlink.h>
+#include <linux/netfilter.h>
+#include <linux/netfilter/nf_tables.h>
+#include <net/netfilter/nf_tables.h>
+#include <net/netfilter/nft_reject.h>
+#include <net/netfilter/ipv6/nf_reject.h>
+
+void nft_reject_ipv6_eval(const struct nft_expr *expr,
+ struct nft_data data[NFT_REG_MAX + 1],
+ const struct nft_pktinfo *pkt)
+{
+ struct nft_reject *priv = nft_expr_priv(expr);
+ struct net *net = dev_net((pkt->in != NULL) ? pkt->in : pkt->out);
+
+ switch (priv->type) {
+ case NFT_REJECT_ICMP_UNREACH:
+ nf_send_unreach6(net, pkt->skb, priv->icmp_code,
+ pkt->ops->hooknum);
+ break;
+ case NFT_REJECT_TCP_RST:
+ nf_send_reset6(net, pkt->skb, pkt->ops->hooknum);
+ break;
+ }
+
+ data[NFT_REG_VERDICT].verdict = NF_DROP;
+}
+EXPORT_SYMBOL_GPL(nft_reject_ipv6_eval);
+
+static struct nft_expr_type nft_reject_ipv6_type;
+static const struct nft_expr_ops nft_reject_ipv6_ops = {
+ .type = &nft_reject_ipv6_type,
+ .size = NFT_EXPR_SIZE(sizeof(struct nft_reject)),
+ .eval = nft_reject_ipv6_eval,
+ .init = nft_reject_init,
+ .dump = nft_reject_dump,
+};
+
+static struct nft_expr_type nft_reject_ipv6_type __read_mostly = {
+ .family = NFPROTO_IPV6,
+ .name = "reject",
+ .ops = &nft_reject_ipv6_ops,
+ .policy = nft_reject_policy,
+ .maxattr = NFTA_REJECT_MAX,
+ .owner = THIS_MODULE,
+};
+
+static int __init nft_reject_ipv6_module_init(void)
+{
+ return nft_register_expr(&nft_reject_ipv6_type);
+}
+
+static void __exit nft_reject_ipv6_module_exit(void)
+{
+ nft_unregister_expr(&nft_reject_ipv6_type);
+}
+
+module_init(nft_reject_ipv6_module_init);
+module_exit(nft_reject_ipv6_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Patrick McHardy <kaber@trash.net>");
+MODULE_ALIAS_NFT_AF_EXPR(AF_INET6, "reject");
#include <net/p8022.h>
#include <net/psnap.h>
#include <net/sock.h>
+#include <net/datalink.h>
#include <net/tcp_states.h>
+#include <net/net_namespace.h>
#include <asm/uaccess.h>
-#ifdef CONFIG_SYSCTL
-extern void ipx_register_sysctl(void);
-extern void ipx_unregister_sysctl(void);
-#else
-#define ipx_register_sysctl()
-#define ipx_unregister_sysctl()
-#endif
-
/* Configuration Variables */
static unsigned char ipxcfg_max_hops = 16;
static char ipxcfg_auto_select_primary;
struct ipx_interface *ipx_primary_net;
struct ipx_interface *ipx_internal_net;
-extern int ipxrtr_add_route(__be32 network, struct ipx_interface *intrfc,
- unsigned char *node);
-extern void ipxrtr_del_routes(struct ipx_interface *intrfc);
-extern int ipxrtr_route_packet(struct sock *sk, struct sockaddr_ipx *usipx,
- struct iovec *iov, size_t len, int noblock);
-extern int ipxrtr_route_skb(struct sk_buff *skb);
-extern struct ipx_route *ipxrtr_lookup(__be32 net);
-extern int ipxrtr_ioctl(unsigned int cmd, void __user *arg);
-
struct ipx_interface *ipx_interfaces_head(void)
{
struct ipx_interface *rc = NULL;
.notifier_call = ipxitf_device_event,
};
-extern struct datalink_proto *make_EII_client(void);
-extern void destroy_EII_client(struct datalink_proto *);
-
static const unsigned char ipx_8022_type = 0xE0;
static const unsigned char ipx_snap_id[5] = { 0x0, 0x0, 0x0, 0x81, 0x37 };
static const char ipx_EII_err_msg[] __initconst =
extern struct ipx_interface *ipx_internal_net;
-extern __be16 ipx_cksum(struct ipxhdr *packet, int length);
extern struct ipx_interface *ipxitf_find_using_net(__be32 net);
extern int ipxitf_demux_socket(struct ipx_interface *intrfc,
struct sk_buff *skb, int copy);
extern int ipxitf_demux_socket(struct ipx_interface *intrfc,
struct sk_buff *skb, int copy);
-extern int ipxitf_send(struct ipx_interface *intrfc, struct sk_buff *skb,
- char *node);
-extern struct ipx_interface *ipxitf_find_using_net(__be32 net);
struct ipx_route *ipxrtr_lookup(__be32 net)
{
IEEE80211_P2P_OPPPS_ENABLE_BIT;
err = ieee80211_assign_beacon(sdata, ¶ms->beacon);
- if (err < 0)
+ if (err < 0) {
+ ieee80211_vif_release_channel(sdata);
return err;
+ }
changed |= err;
err = drv_start_ap(sdata->local, sdata);
if (old)
kfree_rcu(old, rcu_head);
RCU_INIT_POINTER(sdata->u.ap.beacon, NULL);
+ ieee80211_vif_release_channel(sdata);
return err;
}
kfree(sdata->u.ap.next_beacon);
sdata->u.ap.next_beacon = NULL;
- cancel_work_sync(&sdata->u.ap.request_smps_work);
-
/* turn off carrier for this interface and dependent VLANs */
list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list)
netif_carrier_off(vlan->dev);
kfree_rcu(old_beacon, rcu_head);
if (old_probe_resp)
kfree_rcu(old_probe_resp, rcu_head);
+ sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF;
__sta_info_flush(sdata, true);
ieee80211_free_keys(sdata, true);
INIT_DELAYED_WORK(&roc->work, ieee80211_sw_roc_work);
INIT_LIST_HEAD(&roc->dependents);
+ /*
+ * cookie is either the roc cookie (for normal roc)
+ * or the SKB (for mgmt TX)
+ */
+ if (!txskb) {
+ /* local->mtx protects this */
+ local->roc_cookie_counter++;
+ roc->cookie = local->roc_cookie_counter;
+ /* wow, you wrapped 64 bits ... more likely a bug */
+ if (WARN_ON(roc->cookie == 0)) {
+ roc->cookie = 1;
+ local->roc_cookie_counter++;
+ }
+ *cookie = roc->cookie;
+ } else {
+ *cookie = (unsigned long)txskb;
+ }
+
/* if there's one pending or we're scanning, queue this one */
if (!list_empty(&local->roc_list) ||
local->scanning || local->radar_detect_enabled)
if (!queued)
list_add_tail(&roc->list, &local->roc_list);
- /*
- * cookie is either the roc cookie (for normal roc)
- * or the SKB (for mgmt TX)
- */
- if (!txskb) {
- /* local->mtx protects this */
- local->roc_cookie_counter++;
- roc->cookie = local->roc_cookie_counter;
- /* wow, you wrapped 64 bits ... more likely a bug */
- if (WARN_ON(roc->cookie == 0)) {
- roc->cookie = 1;
- local->roc_cookie_counter++;
- }
- *cookie = roc->cookie;
- } else {
- *cookie = (unsigned long)txskb;
- }
-
return 0;
}
u.ap.request_smps_work);
sdata_lock(sdata);
- __ieee80211_request_smps_ap(sdata, sdata->u.ap.driver_smps_mode);
+ if (sdata_dereference(sdata->u.ap.beacon, sdata))
+ __ieee80211_request_smps_ap(sdata,
+ sdata->u.ap.driver_smps_mode);
sdata_unlock(sdata);
}
struct cfg80211_bss *cbss;
struct beacon_data *presp;
struct sta_info *sta;
- int active_ibss;
u16 capability;
- active_ibss = ieee80211_sta_active_ibss(sdata);
-
- if (!active_ibss && !is_zero_ether_addr(ifibss->bssid)) {
+ if (!is_zero_ether_addr(ifibss->bssid)) {
capability = WLAN_CAPABILITY_IBSS;
if (ifibss->privacy)
return ret;
}
+ mutex_lock(&local->iflist_mtx);
+ rcu_assign_pointer(local->monitor_sdata, sdata);
+ mutex_unlock(&local->iflist_mtx);
+
mutex_lock(&local->mtx);
ret = ieee80211_vif_use_channel(sdata, &local->monitor_chandef,
IEEE80211_CHANCTX_EXCLUSIVE);
mutex_unlock(&local->mtx);
if (ret) {
+ mutex_lock(&local->iflist_mtx);
+ rcu_assign_pointer(local->monitor_sdata, NULL);
+ mutex_unlock(&local->iflist_mtx);
+ synchronize_net();
drv_remove_interface(local, sdata);
kfree(sdata);
return ret;
}
- mutex_lock(&local->iflist_mtx);
- rcu_assign_pointer(local->monitor_sdata, sdata);
- mutex_unlock(&local->iflist_mtx);
-
return 0;
}
ieee80211_roc_purge(local, sdata);
- if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ switch (sdata->vif.type) {
+ case NL80211_IFTYPE_STATION:
ieee80211_mgd_stop(sdata);
-
- if (sdata->vif.type == NL80211_IFTYPE_ADHOC)
+ break;
+ case NL80211_IFTYPE_ADHOC:
ieee80211_ibss_stop(sdata);
-
+ break;
+ case NL80211_IFTYPE_AP:
+ cancel_work_sync(&sdata->u.ap.request_smps_work);
+ break;
+ default:
+ break;
+ }
/*
* Remove all stations associated with this interface.
}
/* adjust first fragment's length */
- skb->len = hdrlen + per_fragm;
+ skb_trim(skb, hdrlen + per_fragm);
return 0;
}
config NFT_REJECT
depends on NF_TABLES
- depends on NF_TABLES_IPV6 || !NF_TABLES_IPV6
default m if NETFILTER_ADVANCED=n
tristate "Netfilter nf_tables reject support"
help
explicitly deny and notify via TCP reset/ICMP informational errors
unallowed traffic.
+config NFT_REJECT_INET
+ depends on NF_TABLES_INET
+ default NFT_REJECT
+ tristate
+
config NFT_COMPAT
depends on NF_TABLES
depends on NETFILTER_XTABLES
obj-$(CONFIG_NFT_NAT) += nft_nat.o
obj-$(CONFIG_NFT_QUEUE) += nft_queue.o
obj-$(CONFIG_NFT_REJECT) += nft_reject.o
+obj-$(CONFIG_NFT_REJECT_INET) += nft_reject_inet.o
obj-$(CONFIG_NFT_RBTREE) += nft_rbtree.o
obj-$(CONFIG_NFT_HASH) += nft_hash.o
obj-$(CONFIG_NFT_COUNTER) += nft_counter.o
cp->protocol = p->protocol;
ip_vs_addr_set(p->af, &cp->caddr, p->caddr);
cp->cport = p->cport;
- ip_vs_addr_set(p->af, &cp->vaddr, p->vaddr);
- cp->vport = p->vport;
- /* proto should only be IPPROTO_IP if d_addr is a fwmark */
+ /* proto should only be IPPROTO_IP if p->vaddr is a fwmark */
ip_vs_addr_set(p->protocol == IPPROTO_IP ? AF_UNSPEC : p->af,
- &cp->daddr, daddr);
+ &cp->vaddr, p->vaddr);
+ cp->vport = p->vport;
+ ip_vs_addr_set(p->af, &cp->daddr, daddr);
cp->dport = dport;
cp->flags = flags;
cp->fwmark = fwmark;
nf_ct_delete((struct nf_conn *)ul_conntrack, 0, 0);
}
+static inline bool
+nf_ct_key_equal(struct nf_conntrack_tuple_hash *h,
+ const struct nf_conntrack_tuple *tuple,
+ u16 zone)
+{
+ struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h);
+
+ /* A conntrack can be recreated with the equal tuple,
+ * so we need to check that the conntrack is confirmed
+ */
+ return nf_ct_tuple_equal(tuple, &h->tuple) &&
+ nf_ct_zone(ct) == zone &&
+ nf_ct_is_confirmed(ct);
+}
+
/*
* Warning :
* - Caller must take a reference on returned object
local_bh_disable();
begin:
hlist_nulls_for_each_entry_rcu(h, n, &net->ct.hash[bucket], hnnode) {
- if (nf_ct_tuple_equal(tuple, &h->tuple) &&
- nf_ct_zone(nf_ct_tuplehash_to_ctrack(h)) == zone) {
+ if (nf_ct_key_equal(h, tuple, zone)) {
NF_CT_STAT_INC(net, found);
local_bh_enable();
return h;
!atomic_inc_not_zero(&ct->ct_general.use)))
h = NULL;
else {
- if (unlikely(!nf_ct_tuple_equal(tuple, &h->tuple) ||
- nf_ct_zone(ct) != zone)) {
+ if (unlikely(!nf_ct_key_equal(h, tuple, zone))) {
nf_ct_put(ct);
goto begin;
}
goto out;
add_timer(&ct->timeout);
- nf_conntrack_get(&ct->ct_general);
+ smp_wmb();
+ /* The caller holds a reference to this object */
+ atomic_set(&ct->ct_general.use, 2);
__nf_conntrack_hash_insert(ct, hash, repl_hash);
NF_CT_STAT_INC(net, insert);
spin_unlock_bh(&nf_conntrack_lock);
}
EXPORT_SYMBOL_GPL(nf_conntrack_hash_check_insert);
+/* deletion from this larval template list happens via nf_ct_put() */
+void nf_conntrack_tmpl_insert(struct net *net, struct nf_conn *tmpl)
+{
+ __set_bit(IPS_TEMPLATE_BIT, &tmpl->status);
+ __set_bit(IPS_CONFIRMED_BIT, &tmpl->status);
+ nf_conntrack_get(&tmpl->ct_general);
+
+ spin_lock_bh(&nf_conntrack_lock);
+ /* Overload tuple linked list to put us in template list. */
+ hlist_nulls_add_head_rcu(&tmpl->tuplehash[IP_CT_DIR_ORIGINAL].hnnode,
+ &net->ct.tmpl);
+ spin_unlock_bh(&nf_conntrack_lock);
+}
+EXPORT_SYMBOL_GPL(nf_conntrack_tmpl_insert);
+
/* Confirm a connection given skb; places it in hash table */
int
__nf_conntrack_confirm(struct sk_buff *skb)
nf_ct_zone->id = zone;
}
#endif
- /*
- * changes to lookup keys must be done before setting refcnt to 1
+ /* Because we use RCU lookups, we set ct_general.use to zero before
+ * this is inserted in any list.
*/
- smp_wmb();
- atomic_set(&ct->ct_general.use, 1);
+ atomic_set(&ct->ct_general.use, 0);
return ct;
#ifdef CONFIG_NF_CONNTRACK_ZONES
{
struct net *net = nf_ct_net(ct);
+ /* A freed object has refcnt == 0, that's
+ * the golden rule for SLAB_DESTROY_BY_RCU
+ */
+ NF_CT_ASSERT(atomic_read(&ct->ct_general.use) == 0);
+
nf_ct_ext_destroy(ct);
nf_ct_ext_free(ct);
kmem_cache_free(net->ct.nf_conntrack_cachep, ct);
NF_CT_STAT_INC(net, new);
}
+ /* Now it is inserted into the unconfirmed list, bump refcount */
+ nf_conntrack_get(&ct->ct_general);
+
/* Overload tuple linked list to put us in unconfirmed list. */
hlist_nulls_add_head_rcu(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode,
&net->ct.unconfirmed);
goto err2;
if (!nfct_synproxy_ext_add(ct))
goto err2;
- __set_bit(IPS_TEMPLATE_BIT, &ct->status);
- __set_bit(IPS_CONFIRMED_BIT, &ct->status);
+ nf_conntrack_tmpl_insert(net, ct);
snet->tmpl = ct;
snet->stats = alloc_percpu(struct synproxy_stats);
{
struct synproxy_net *snet = synproxy_pernet(net);
- nf_conntrack_free(snet->tmpl);
+ nf_ct_put(snet->tmpl);
synproxy_proc_exit(net);
free_percpu(snet->stats);
}
return 0;
}
-static void nf_tables_rcu_chain_destroy(struct rcu_head *head)
+static void nf_tables_chain_destroy(struct nft_chain *chain)
{
- struct nft_chain *chain = container_of(head, struct nft_chain, rcu_head);
-
BUG_ON(chain->use > 0);
if (chain->flags & NFT_BASE_CHAIN) {
if (IS_ERR(chain))
return PTR_ERR(chain);
- if (!list_empty(&chain->rules))
+ if (!list_empty(&chain->rules) || chain->use > 0)
return -EBUSY;
list_del(&chain->list);
family);
/* Make sure all rule references are gone before this is released */
- call_rcu(&chain->rcu_head, nf_tables_rcu_chain_destroy);
+ synchronize_rcu();
+
+ nf_tables_chain_destroy(chain);
return 0;
}
}
EXPORT_SYMBOL_GPL(nft_unregister_expr);
-static const struct nft_expr_type *__nft_expr_type_get(struct nlattr *nla)
+static const struct nft_expr_type *__nft_expr_type_get(u8 family,
+ struct nlattr *nla)
{
const struct nft_expr_type *type;
list_for_each_entry(type, &nf_tables_expressions, list) {
- if (!nla_strcmp(nla, type->name))
+ if (!nla_strcmp(nla, type->name) &&
+ (!type->family || type->family == family))
return type;
}
return NULL;
}
-static const struct nft_expr_type *nft_expr_type_get(struct nlattr *nla)
+static const struct nft_expr_type *nft_expr_type_get(u8 family,
+ struct nlattr *nla)
{
const struct nft_expr_type *type;
if (nla == NULL)
return ERR_PTR(-EINVAL);
- type = __nft_expr_type_get(nla);
+ type = __nft_expr_type_get(family, nla);
if (type != NULL && try_module_get(type->owner))
return type;
#ifdef CONFIG_MODULES
if (type == NULL) {
+ nfnl_unlock(NFNL_SUBSYS_NFTABLES);
+ request_module("nft-expr-%u-%.*s", family,
+ nla_len(nla), (char *)nla_data(nla));
+ nfnl_lock(NFNL_SUBSYS_NFTABLES);
+ if (__nft_expr_type_get(family, nla))
+ return ERR_PTR(-EAGAIN);
+
nfnl_unlock(NFNL_SUBSYS_NFTABLES);
request_module("nft-expr-%.*s",
nla_len(nla), (char *)nla_data(nla));
nfnl_lock(NFNL_SUBSYS_NFTABLES);
- if (__nft_expr_type_get(nla))
+ if (__nft_expr_type_get(family, nla))
return ERR_PTR(-EAGAIN);
}
#endif
if (err < 0)
return err;
- type = nft_expr_type_get(tb[NFTA_EXPR_NAME]);
+ type = nft_expr_type_get(ctx->afi->family, tb[NFTA_EXPR_NAME]);
if (IS_ERR(type))
return PTR_ERR(type);
return err;
}
-static void nf_tables_rcu_rule_destroy(struct rcu_head *head)
+static void nf_tables_rule_destroy(struct nft_rule *rule)
{
- struct nft_rule *rule = container_of(head, struct nft_rule, rcu_head);
struct nft_expr *expr;
/*
kfree(rule);
}
-static void nf_tables_rule_destroy(struct nft_rule *rule)
-{
- call_rcu(&rule->rcu_head, nf_tables_rcu_rule_destroy);
-}
-
#define NFT_RULE_MAXEXPRS 128
static struct nft_expr_info *info;
synchronize_rcu();
list_for_each_entry_safe(rupd, tmp, &net->nft.commit_list, list) {
- /* Delete this rule from the dirty list */
- list_del(&rupd->list);
-
/* This rule was inactive in the past and just became active.
* Clear the next bit of the genmask since its meaning has
* changed, now it is the future.
rupd->chain, rupd->rule,
NFT_MSG_NEWRULE, 0,
rupd->family);
+ list_del(&rupd->list);
kfree(rupd);
continue;
}
nf_tables_rule_notify(skb, rupd->nlh, rupd->table, rupd->chain,
rupd->rule, NFT_MSG_DELRULE, 0,
rupd->family);
+ }
+
+ /* Make sure we don't see any packet traversing old rules */
+ synchronize_rcu();
+
+ /* Now we can safely release unused old rules */
+ list_for_each_entry_safe(rupd, tmp, &net->nft.commit_list, list) {
nf_tables_rule_destroy(rupd->rule);
+ list_del(&rupd->list);
kfree(rupd);
}
struct nft_rule_trans *rupd, *tmp;
list_for_each_entry_safe(rupd, tmp, &net->nft.commit_list, list) {
- /* Delete all rules from the dirty list */
- list_del(&rupd->list);
-
if (!nft_rule_is_active_next(net, rupd->rule)) {
nft_rule_clear(net, rupd->rule);
+ list_del(&rupd->list);
kfree(rupd);
continue;
}
/* This rule is inactive, get rid of it */
list_del_rcu(&rupd->rule->list);
+ }
+
+ /* Make sure we don't see any packet accessing aborted rules */
+ synchronize_rcu();
+
+ list_for_each_entry_safe(rupd, tmp, &net->nft.commit_list, list) {
nf_tables_rule_destroy(rupd->rule);
+ list_del(&rupd->list);
kfree(rupd);
}
+
return 0;
}
}
if (nla[NFTA_SET_TABLE] != NULL) {
+ if (afi == NULL)
+ return -EAFNOSUPPORT;
+
table = nf_tables_table_lookup(afi, nla[NFTA_SET_TABLE]);
if (IS_ERR(table))
return PTR_ERR(table);
if (!sscanf(i->name, name, &tmp))
continue;
- if (tmp < 0 || tmp > BITS_PER_LONG * PAGE_SIZE)
+ if (tmp < 0 || tmp >= BITS_PER_BYTE * PAGE_SIZE)
continue;
set_bit(tmp, inuse);
}
- n = find_first_zero_bit(inuse, BITS_PER_LONG * PAGE_SIZE);
+ n = find_first_zero_bit(inuse, BITS_PER_BYTE * PAGE_SIZE);
free_page((unsigned long)inuse);
}
struct nft_ctx ctx;
int err;
+ if (nfmsg->nfgen_family == NFPROTO_UNSPEC)
+ return -EAFNOSUPPORT;
if (nla[NFTA_SET_TABLE] == NULL)
return -EINVAL;
if (err < 0)
return err;
- if (nfmsg->nfgen_family == NFPROTO_UNSPEC)
- return -EAFNOSUPPORT;
-
set = nf_tables_set_lookup(ctx.table, nla[NFTA_SET_NAME]);
if (IS_ERR(set))
return PTR_ERR(set);
if (nla[NFTA_SET_ELEM_DATA] == NULL &&
!(elem.flags & NFT_SET_ELEM_INTERVAL_END))
return -EINVAL;
+ if (nla[NFTA_SET_ELEM_DATA] != NULL &&
+ elem.flags & NFT_SET_ELEM_INTERVAL_END)
+ return -EINVAL;
} else {
if (nla[NFTA_SET_ELEM_DATA] != NULL)
return -EINVAL;
const struct nft_set_iter *iter,
const struct nft_set_elem *elem)
{
+ if (elem->flags & NFT_SET_ELEM_INTERVAL_END)
+ return 0;
+
switch (elem->data.verdict) {
case NFT_JUMP:
case NFT_GOTO:
},
};
-static inline void nft_trace_packet(const struct nft_pktinfo *pkt,
- const struct nft_chain *chain,
- int rulenum, enum nft_trace type)
+static void nft_trace_packet(const struct nft_pktinfo *pkt,
+ const struct nft_chain *chain,
+ int rulenum, enum nft_trace type)
{
struct net *net = dev_net(pkt->in ? pkt->in : pkt->out);
if (tb[NFTA_CT_DIRECTION] != NULL)
return -EINVAL;
break;
+ case NFT_CT_L3PROTOCOL:
case NFT_CT_PROTOCOL:
case NFT_CT_SRC:
case NFT_CT_DST:
goto nla_put_failure;
if (nla_put_be32(skb, NFTA_CT_KEY, htonl(priv->key)))
goto nla_put_failure;
- if (nla_put_u8(skb, NFTA_CT_DIRECTION, priv->dir))
- goto nla_put_failure;
+
+ switch (priv->key) {
+ case NFT_CT_PROTOCOL:
+ case NFT_CT_SRC:
+ case NFT_CT_DST:
+ case NFT_CT_PROTO_SRC:
+ case NFT_CT_PROTO_DST:
+ if (nla_put_u8(skb, NFTA_CT_DIRECTION, priv->dir))
+ goto nla_put_failure;
+ default:
+ break;
+ }
+
return 0;
nla_put_failure:
struct nft_log {
struct nf_loginfo loginfo;
char *prefix;
- int family;
};
static void nft_log_eval(const struct nft_expr *expr,
const struct nft_log *priv = nft_expr_priv(expr);
struct net *net = dev_net(pkt->in ? pkt->in : pkt->out);
- nf_log_packet(net, priv->family, pkt->ops->hooknum, pkt->skb, pkt->in,
+ nf_log_packet(net, pkt->ops->pf, pkt->ops->hooknum, pkt->skb, pkt->in,
pkt->out, &priv->loginfo, "%s", priv->prefix);
}
struct nf_loginfo *li = &priv->loginfo;
const struct nlattr *nla;
- priv->family = ctx->afi->family;
-
nla = tb[NFTA_LOG_PREFIX];
if (nla != NULL) {
priv->prefix = kmalloc(nla_len(nla) + 1, GFP_KERNEL);
#include <linux/netfilter.h>
#include <linux/netfilter/nf_tables.h>
#include <net/netfilter/nf_tables.h>
+#include <net/netfilter/nf_tables_core.h>
struct nft_lookup {
struct nft_set *set;
u16 queuenum;
u16 queues_total;
u16 flags;
- u8 family;
};
static void nft_queue_eval(const struct nft_expr *expr,
queue = priv->queuenum + cpu % priv->queues_total;
} else {
queue = nfqueue_hash(pkt->skb, queue,
- priv->queues_total, priv->family,
+ priv->queues_total, pkt->ops->pf,
jhash_initval);
}
}
return -EINVAL;
init_hashrandom(&jhash_initval);
- priv->family = ctx->afi->family;
priv->queuenum = ntohs(nla_get_be16(tb[NFTA_QUEUE_NUM]));
if (tb[NFTA_QUEUE_TOTAL] != NULL)
struct nft_rbtree_elem *rbe)
{
nft_data_uninit(&rbe->key, NFT_DATA_VALUE);
- if (set->flags & NFT_SET_MAP)
+ if (set->flags & NFT_SET_MAP &&
+ !(rbe->flags & NFT_SET_ELEM_INTERVAL_END))
nft_data_uninit(rbe->data, set->dtype);
+
kfree(rbe);
}
int err;
size = sizeof(*rbe);
- if (set->flags & NFT_SET_MAP)
+ if (set->flags & NFT_SET_MAP &&
+ !(elem->flags & NFT_SET_ELEM_INTERVAL_END))
size += sizeof(rbe->data[0]);
rbe = kzalloc(size, GFP_KERNEL);
rbe->flags = elem->flags;
nft_data_copy(&rbe->key, &elem->key);
- if (set->flags & NFT_SET_MAP)
+ if (set->flags & NFT_SET_MAP &&
+ !(rbe->flags & NFT_SET_ELEM_INTERVAL_END))
nft_data_copy(rbe->data, &elem->data);
err = __nft_rbtree_insert(set, rbe);
parent = parent->rb_right;
else {
elem->cookie = rbe;
- if (set->flags & NFT_SET_MAP)
+ if (set->flags & NFT_SET_MAP &&
+ !(rbe->flags & NFT_SET_ELEM_INTERVAL_END))
nft_data_copy(&elem->data, rbe->data);
elem->flags = rbe->flags;
return 0;
rbe = rb_entry(node, struct nft_rbtree_elem, node);
nft_data_copy(&elem.key, &rbe->key);
- if (set->flags & NFT_SET_MAP)
+ if (set->flags & NFT_SET_MAP &&
+ !(rbe->flags & NFT_SET_ELEM_INTERVAL_END))
nft_data_copy(&elem.data, rbe->data);
elem.flags = rbe->flags;
#include <linux/netfilter.h>
#include <linux/netfilter/nf_tables.h>
#include <net/netfilter/nf_tables.h>
-#include <net/icmp.h>
-#include <net/netfilter/ipv4/nf_reject.h>
+#include <net/netfilter/nft_reject.h>
-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
-#include <net/netfilter/ipv6/nf_reject.h>
-#endif
-
-struct nft_reject {
- enum nft_reject_types type:8;
- u8 icmp_code;
- u8 family;
-};
-
-static void nft_reject_eval(const struct nft_expr *expr,
- struct nft_data data[NFT_REG_MAX + 1],
- const struct nft_pktinfo *pkt)
-{
- struct nft_reject *priv = nft_expr_priv(expr);
-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
- struct net *net = dev_net((pkt->in != NULL) ? pkt->in : pkt->out);
-#endif
- switch (priv->type) {
- case NFT_REJECT_ICMP_UNREACH:
- if (priv->family == NFPROTO_IPV4)
- nf_send_unreach(pkt->skb, priv->icmp_code);
-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
- else if (priv->family == NFPROTO_IPV6)
- nf_send_unreach6(net, pkt->skb, priv->icmp_code,
- pkt->ops->hooknum);
-#endif
- break;
- case NFT_REJECT_TCP_RST:
- if (priv->family == NFPROTO_IPV4)
- nf_send_reset(pkt->skb, pkt->ops->hooknum);
-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
- else if (priv->family == NFPROTO_IPV6)
- nf_send_reset6(net, pkt->skb, pkt->ops->hooknum);
-#endif
- break;
- }
-
- data[NFT_REG_VERDICT].verdict = NF_DROP;
-}
-
-static const struct nla_policy nft_reject_policy[NFTA_REJECT_MAX + 1] = {
+const struct nla_policy nft_reject_policy[NFTA_REJECT_MAX + 1] = {
[NFTA_REJECT_TYPE] = { .type = NLA_U32 },
[NFTA_REJECT_ICMP_CODE] = { .type = NLA_U8 },
};
+EXPORT_SYMBOL_GPL(nft_reject_policy);
-static int nft_reject_init(const struct nft_ctx *ctx,
- const struct nft_expr *expr,
- const struct nlattr * const tb[])
+int nft_reject_init(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nlattr * const tb[])
{
struct nft_reject *priv = nft_expr_priv(expr);
if (tb[NFTA_REJECT_TYPE] == NULL)
return -EINVAL;
- priv->family = ctx->afi->family;
priv->type = ntohl(nla_get_be32(tb[NFTA_REJECT_TYPE]));
switch (priv->type) {
case NFT_REJECT_ICMP_UNREACH:
return 0;
}
+EXPORT_SYMBOL_GPL(nft_reject_init);
-static int nft_reject_dump(struct sk_buff *skb, const struct nft_expr *expr)
+int nft_reject_dump(struct sk_buff *skb, const struct nft_expr *expr)
{
const struct nft_reject *priv = nft_expr_priv(expr);
nla_put_failure:
return -1;
}
-
-static struct nft_expr_type nft_reject_type;
-static const struct nft_expr_ops nft_reject_ops = {
- .type = &nft_reject_type,
- .size = NFT_EXPR_SIZE(sizeof(struct nft_reject)),
- .eval = nft_reject_eval,
- .init = nft_reject_init,
- .dump = nft_reject_dump,
-};
-
-static struct nft_expr_type nft_reject_type __read_mostly = {
- .name = "reject",
- .ops = &nft_reject_ops,
- .policy = nft_reject_policy,
- .maxattr = NFTA_REJECT_MAX,
- .owner = THIS_MODULE,
-};
-
-static int __init nft_reject_module_init(void)
-{
- return nft_register_expr(&nft_reject_type);
-}
-
-static void __exit nft_reject_module_exit(void)
-{
- nft_unregister_expr(&nft_reject_type);
-}
-
-module_init(nft_reject_module_init);
-module_exit(nft_reject_module_exit);
+EXPORT_SYMBOL_GPL(nft_reject_dump);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Patrick McHardy <kaber@trash.net>");
-MODULE_ALIAS_NFT_EXPR("reject");
--- /dev/null
+/*
+ * Copyright (c) 2014 Patrick McHardy <kaber@trash.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/netlink.h>
+#include <linux/netfilter.h>
+#include <linux/netfilter/nf_tables.h>
+#include <net/netfilter/nf_tables.h>
+#include <net/netfilter/nft_reject.h>
+
+static void nft_reject_inet_eval(const struct nft_expr *expr,
+ struct nft_data data[NFT_REG_MAX + 1],
+ const struct nft_pktinfo *pkt)
+{
+ switch (pkt->ops->pf) {
+ case NFPROTO_IPV4:
+ nft_reject_ipv4_eval(expr, data, pkt);
+ case NFPROTO_IPV6:
+ nft_reject_ipv6_eval(expr, data, pkt);
+ }
+}
+
+static struct nft_expr_type nft_reject_inet_type;
+static const struct nft_expr_ops nft_reject_inet_ops = {
+ .type = &nft_reject_inet_type,
+ .size = NFT_EXPR_SIZE(sizeof(struct nft_reject)),
+ .eval = nft_reject_inet_eval,
+ .init = nft_reject_init,
+ .dump = nft_reject_dump,
+};
+
+static struct nft_expr_type nft_reject_inet_type __read_mostly = {
+ .family = NFPROTO_INET,
+ .name = "reject",
+ .ops = &nft_reject_inet_ops,
+ .policy = nft_reject_policy,
+ .maxattr = NFTA_REJECT_MAX,
+ .owner = THIS_MODULE,
+};
+
+static int __init nft_reject_inet_module_init(void)
+{
+ return nft_register_expr(&nft_reject_inet_type);
+}
+
+static void __exit nft_reject_inet_module_exit(void)
+{
+ nft_unregister_expr(&nft_reject_inet_type);
+}
+
+module_init(nft_reject_inet_module_init);
+module_exit(nft_reject_inet_module_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Patrick McHardy <kaber@trash.net>");
+MODULE_ALIAS_NFT_AF_EXPR(1, "reject");
goto err3;
}
- __set_bit(IPS_TEMPLATE_BIT, &ct->status);
- __set_bit(IPS_CONFIRMED_BIT, &ct->status);
-
- /* Overload tuple linked list to put us in template list. */
- hlist_nulls_add_head_rcu(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode,
- &par->net->ct.tmpl);
+ nf_conntrack_tmpl_insert(par->net, ct);
out:
info->ct = ct;
return 0;
#include "datapath.h"
#include "flow.h"
+#include "flow_table.h"
#include "flow_netlink.h"
#include "vport-internal_dev.h"
#include "vport-netdev.h"
{
struct datapath *dp = container_of(rcu, struct datapath, rcu);
- ovs_flow_tbl_destroy(&dp->table);
free_percpu(dp->stats_percpu);
release_net(ovs_dp_get_net(dp));
kfree(dp->ports);
skb_zerocopy(user_skb, skb, skb->len, hlen);
+ /* Pad OVS_PACKET_ATTR_PACKET if linear copy was performed */
+ if (!(dp->user_features & OVS_DP_F_UNALIGNED)) {
+ size_t plen = NLA_ALIGN(user_skb->len) - user_skb->len;
+
+ if (plen > 0)
+ memset(skb_put(user_skb, plen), 0, plen);
+ }
+
((struct nlmsghdr *) user_skb->data)->nlmsg_len = user_skb->len;
err = genlmsg_unicast(ovs_dp_get_net(dp), user_skb, upcall_info->portid);
goto err_unlock_ovs;
/* The unmasked key has to be the same for flow updates. */
- error = -EINVAL;
- if (!ovs_flow_cmp_unmasked_key(flow, &match)) {
- OVS_NLERR("Flow modification message rejected, unmasked key does not match.\n");
+ if (!ovs_flow_cmp_unmasked_key(flow, &match))
goto err_unlock_ovs;
- }
/* Update actions. */
old_acts = ovsl_dereference(flow->sf_acts);
msgsize += nla_total_size(IFNAMSIZ);
msgsize += nla_total_size(sizeof(struct ovs_dp_stats));
msgsize += nla_total_size(sizeof(struct ovs_dp_megaflow_stats));
+ msgsize += nla_total_size(sizeof(u32)); /* OVS_DP_ATTR_USER_FEATURES */
return msgsize;
}
err_destroy_percpu:
free_percpu(dp->stats_percpu);
err_destroy_table:
- ovs_flow_tbl_destroy(&dp->table);
+ ovs_flow_tbl_destroy(&dp->table, false);
err_free_dp:
release_net(ovs_dp_get_net(dp));
kfree(dp);
list_del_rcu(&dp->list_node);
/* OVSP_LOCAL is datapath internal port. We need to make sure that
- * all port in datapath are destroyed first before freeing datapath.
+ * all ports in datapath are destroyed first before freeing datapath.
*/
ovs_dp_detach_port(ovs_vport_ovsl(dp, OVSP_LOCAL));
+ /* RCU destroy the flow table */
+ ovs_flow_tbl_destroy(&dp->table, true);
+
call_rcu(&dp->rcu, destroy_dp_rcu);
}
flow_free(flow);
}
-static void flow_mask_del_ref(struct sw_flow_mask *mask, bool deferred)
-{
- if (!mask)
- return;
-
- BUG_ON(!mask->ref_count);
- mask->ref_count--;
-
- if (!mask->ref_count) {
- list_del_rcu(&mask->list);
- if (deferred)
- kfree_rcu(mask, rcu);
- else
- kfree(mask);
- }
-}
-
void ovs_flow_free(struct sw_flow *flow, bool deferred)
{
if (!flow)
return;
- flow_mask_del_ref(flow->mask, deferred);
+ if (flow->mask) {
+ struct sw_flow_mask *mask = flow->mask;
+
+ /* ovs-lock is required to protect mask-refcount and
+ * mask list.
+ */
+ ASSERT_OVSL();
+ BUG_ON(!mask->ref_count);
+ mask->ref_count--;
+
+ if (!mask->ref_count) {
+ list_del_rcu(&mask->list);
+ if (deferred)
+ kfree_rcu(mask, rcu);
+ else
+ kfree(mask);
+ }
+ }
if (deferred)
call_rcu(&flow->rcu, rcu_free_flow_callback);
flex_array_free(buckets);
}
+
static void __table_instance_destroy(struct table_instance *ti)
{
- int i;
-
- if (ti->keep_flows)
- goto skip_flows;
-
- for (i = 0; i < ti->n_buckets; i++) {
- struct sw_flow *flow;
- struct hlist_head *head = flex_array_get(ti->buckets, i);
- struct hlist_node *n;
- int ver = ti->node_ver;
-
- hlist_for_each_entry_safe(flow, n, head, hash_node[ver]) {
- hlist_del(&flow->hash_node[ver]);
- ovs_flow_free(flow, false);
- }
- }
-
-skip_flows:
free_buckets(ti->buckets);
kfree(ti);
}
static void table_instance_destroy(struct table_instance *ti, bool deferred)
{
+ int i;
+
if (!ti)
return;
+ if (ti->keep_flows)
+ goto skip_flows;
+
+ for (i = 0; i < ti->n_buckets; i++) {
+ struct sw_flow *flow;
+ struct hlist_head *head = flex_array_get(ti->buckets, i);
+ struct hlist_node *n;
+ int ver = ti->node_ver;
+
+ hlist_for_each_entry_safe(flow, n, head, hash_node[ver]) {
+ hlist_del_rcu(&flow->hash_node[ver]);
+ ovs_flow_free(flow, deferred);
+ }
+ }
+
+skip_flows:
if (deferred)
call_rcu(&ti->rcu, flow_tbl_destroy_rcu_cb);
else
__table_instance_destroy(ti);
}
-void ovs_flow_tbl_destroy(struct flow_table *table)
+void ovs_flow_tbl_destroy(struct flow_table *table, bool deferred)
{
struct table_instance *ti = ovsl_dereference(table->ti);
- table_instance_destroy(ti, false);
+ table_instance_destroy(ti, deferred);
}
struct sw_flow *ovs_flow_tbl_dump_next(struct table_instance *ti,
mask = kmalloc(sizeof(*mask), GFP_KERNEL);
if (mask)
- mask->ref_count = 0;
+ mask->ref_count = 1;
return mask;
}
-static void mask_add_ref(struct sw_flow_mask *mask)
-{
- mask->ref_count++;
-}
-
static bool mask_equal(const struct sw_flow_mask *a,
const struct sw_flow_mask *b)
{
mask->key = new->key;
mask->range = new->range;
list_add_rcu(&mask->list, &tbl->mask_list);
+ } else {
+ BUG_ON(!mask->ref_count);
+ mask->ref_count++;
}
- mask_add_ref(mask);
flow->mask = mask;
return 0;
}
int ovs_flow_tbl_init(struct flow_table *);
int ovs_flow_tbl_count(struct flow_table *table);
-void ovs_flow_tbl_destroy(struct flow_table *table);
+void ovs_flow_tbl_destroy(struct flow_table *table, bool deferred);
int ovs_flow_tbl_flush(struct flow_table *flow_table);
int ovs_flow_tbl_insert(struct flow_table *table, struct sw_flow *flow,
*/
sctp_v6_to_sk_daddr(&asoc->peer.primary_addr, newsk);
+ newsk->sk_v6_rcv_saddr = sk->sk_v6_rcv_saddr;
+
sk_refcnt_debug_inc(newsk);
if (newsk->sk_prot->init(newsk)) {
}
}
-int svc_alloc_arg(struct svc_rqst *rqstp)
+static int svc_alloc_arg(struct svc_rqst *rqstp)
{
struct svc_serv *serv = rqstp->rq_server;
struct xdr_buf *arg;
return 0;
}
-struct svc_xprt *svc_get_next_xprt(struct svc_rqst *rqstp, long timeout)
+static struct svc_xprt *svc_get_next_xprt(struct svc_rqst *rqstp, long timeout)
{
struct svc_xprt *xprt;
struct svc_pool *pool = rqstp->rq_pool;
return xprt;
}
-void svc_add_new_temp_xprt(struct svc_serv *serv, struct svc_xprt *newxpt)
+static void svc_add_new_temp_xprt(struct svc_serv *serv, struct svc_xprt *newxpt)
{
spin_lock_bh(&serv->sv_lock);
set_bit(XPT_TEMP, &newxpt->xpt_flags);
rdev->opencount--;
- WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev &&
- !rdev->scan_req->notified);
+ if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
+ if (WARN_ON(!rdev->scan_req->notified))
+ rdev->scan_req->aborted = true;
+ ___cfg80211_scan_done(rdev, false);
+ }
}
static int cfg80211_rfkill_set_block(void *data, bool blocked)
int i;
u16 ifmodes = wiphy->interface_modes;
- /* support for 5/10 MHz is broken due to nl80211 API mess - disable */
- wiphy->flags &= ~WIPHY_FLAG_SUPPORTS_5_10_MHZ;
-
/*
* There are major locking problems in nl80211/mac80211 for CSA,
* disable for all drivers until this has been reworked.
break;
case NETDEV_DOWN:
cfg80211_update_iface_num(rdev, wdev->iftype, -1);
- WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev &&
- !rdev->scan_req->notified);
+ if (rdev->scan_req && rdev->scan_req->wdev == wdev) {
+ if (WARN_ON(!rdev->scan_req->notified))
+ rdev->scan_req->aborted = true;
+ ___cfg80211_scan_done(rdev, false);
+ }
if (WARN_ON(rdev->sched_scan_req &&
rdev->sched_scan_req->dev == wdev->netdev)) {
struct rb_root bss_tree;
u32 bss_generation;
struct cfg80211_scan_request *scan_req; /* protected by RTNL */
+ struct sk_buff *scan_msg;
struct cfg80211_sched_scan_request *sched_scan_req;
unsigned long suspend_at;
struct work_struct scan_done_wk;
struct key_params *params, int key_idx,
bool pairwise, const u8 *mac_addr);
void __cfg80211_scan_done(struct work_struct *wk);
-void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev);
+void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev,
+ bool send_message);
void __cfg80211_sched_scan_results(struct work_struct *wk);
int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
bool driver_initiated);
* We can then retry with the larger buffer.
*/
if ((ret == -ENOBUFS || ret == -EMSGSIZE) &&
- !skb->len &&
+ !skb->len && !state->split &&
cb->min_dump_alloc < 4096) {
cb->min_dump_alloc = 4096;
+ state->split_start = 0;
rtnl_unlock();
return 1;
}
if (!rdev->ops->scan)
return -EOPNOTSUPP;
- if (rdev->scan_req) {
+ if (rdev->scan_req || rdev->scan_msg) {
err = -EBUSY;
goto unlock;
}
NL80211_MCGRP_SCAN, GFP_KERNEL);
}
-void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
- struct wireless_dev *wdev)
+struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev, bool aborted)
{
struct sk_buff *msg;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
- return;
+ return NULL;
if (nl80211_send_scan_msg(msg, rdev, wdev, 0, 0, 0,
- NL80211_CMD_NEW_SCAN_RESULTS) < 0) {
+ aborted ? NL80211_CMD_SCAN_ABORTED :
+ NL80211_CMD_NEW_SCAN_RESULTS) < 0) {
nlmsg_free(msg);
- return;
+ return NULL;
}
- genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
- NL80211_MCGRP_SCAN, GFP_KERNEL);
+ return msg;
}
-void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
- struct wireless_dev *wdev)
+void nl80211_send_scan_result(struct cfg80211_registered_device *rdev,
+ struct sk_buff *msg)
{
- struct sk_buff *msg;
-
- msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
- if (nl80211_send_scan_msg(msg, rdev, wdev, 0, 0, 0,
- NL80211_CMD_SCAN_ABORTED) < 0) {
- nlmsg_free(msg);
- return;
- }
-
genlmsg_multicast_netns(&nl80211_fam, wiphy_net(&rdev->wiphy), msg, 0,
NL80211_MCGRP_SCAN, GFP_KERNEL);
}
void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev);
void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
struct wireless_dev *wdev);
-void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
- struct wireless_dev *wdev);
-void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
- struct wireless_dev *wdev);
+struct sk_buff *nl80211_build_scan_msg(struct cfg80211_registered_device *rdev,
+ struct wireless_dev *wdev, bool aborted);
+void nl80211_send_scan_result(struct cfg80211_registered_device *rdev,
+ struct sk_buff *msg);
void nl80211_send_sched_scan(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u32 cmd);
void nl80211_send_sched_scan_results(struct cfg80211_registered_device *rdev,
dev->bss_generation++;
}
-void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev)
+void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev,
+ bool send_message)
{
struct cfg80211_scan_request *request;
struct wireless_dev *wdev;
+ struct sk_buff *msg;
#ifdef CONFIG_CFG80211_WEXT
union iwreq_data wrqu;
#endif
ASSERT_RTNL();
- request = rdev->scan_req;
+ if (rdev->scan_msg) {
+ nl80211_send_scan_result(rdev, rdev->scan_msg);
+ rdev->scan_msg = NULL;
+ return;
+ }
+ request = rdev->scan_req;
if (!request)
return;
if (wdev->netdev)
cfg80211_sme_scan_done(wdev->netdev);
- if (request->aborted) {
- nl80211_send_scan_aborted(rdev, wdev);
- } else {
- if (request->flags & NL80211_SCAN_FLAG_FLUSH) {
- /* flush entries from previous scans */
- spin_lock_bh(&rdev->bss_lock);
- __cfg80211_bss_expire(rdev, request->scan_start);
- spin_unlock_bh(&rdev->bss_lock);
- }
- nl80211_send_scan_done(rdev, wdev);
+ if (!request->aborted &&
+ request->flags & NL80211_SCAN_FLAG_FLUSH) {
+ /* flush entries from previous scans */
+ spin_lock_bh(&rdev->bss_lock);
+ __cfg80211_bss_expire(rdev, request->scan_start);
+ spin_unlock_bh(&rdev->bss_lock);
}
+ msg = nl80211_build_scan_msg(rdev, wdev, request->aborted);
+
#ifdef CONFIG_CFG80211_WEXT
if (wdev->netdev && !request->aborted) {
memset(&wrqu, 0, sizeof(wrqu));
rdev->scan_req = NULL;
kfree(request);
+
+ if (!send_message)
+ rdev->scan_msg = msg;
+ else
+ nl80211_send_scan_result(rdev, msg);
}
void __cfg80211_scan_done(struct work_struct *wk)
scan_done_wk);
rtnl_lock();
- ___cfg80211_scan_done(rdev);
+ ___cfg80211_scan_done(rdev, true);
rtnl_unlock();
}
if (IS_ERR(rdev))
return PTR_ERR(rdev);
- if (rdev->scan_req) {
+ if (rdev->scan_req || rdev->scan_msg) {
err = -EBUSY;
goto out;
}
if (IS_ERR(rdev))
return PTR_ERR(rdev);
- if (rdev->scan_req)
+ if (rdev->scan_req || rdev->scan_msg)
return -EAGAIN;
res = ieee80211_scan_results(rdev, info, extra, data->length);
ASSERT_RDEV_LOCK(rdev);
ASSERT_WDEV_LOCK(wdev);
- if (rdev->scan_req)
+ if (rdev->scan_req || rdev->scan_msg)
return -EBUSY;
if (wdev->conn->params.channel)
$camelcase_seeded = 1;
- if (-d ".git") {
+ if (-e ".git") {
my $git_last_include_commit = `git log --no-merges --pretty=format:"%h%n" -1 -- include`;
chomp $git_last_include_commit;
$camelcase_cache = ".checkpatch-camelcase.git.$git_last_include_commit";
return;
}
- if (-d ".git") {
+ if (-e ".git") {
$files = `git ls-files "include/*.h"`;
@include_files = split('\n', $files);
}
my %VCS_cmds_git = (
"execute_cmd" => \&git_execute_cmd,
- "available" => '(which("git") ne "") && (-d ".git")',
+ "available" => '(which("git") ne "") && (-e ".git")',
"find_signers_cmd" =>
"git log --no-color --follow --since=\$email_git_since " .
'--numstat --no-merges ' .
range_lo < 0x9 ? "[%X-9" : "[%X",
range_lo);
sprintf(alias + strlen(alias),
- range_hi > 0xA ? "a-%X]" : "%X]",
- range_lo);
+ range_hi > 0xA ? "A-%X]" : "%X]",
+ range_hi);
}
}
if (bcdDevice_initial_digits < (sizeof(bcdDevice_lo) * 2 - 1))
config LSM_MMAP_MIN_ADDR
int "Low address space for LSM to protect from user allocation"
depends on SECURITY && SECURITY_SELINUX
- default 32768 if ARM
+ default 32768 if ARM || (ARM64 && COMPAT)
default 65536
help
This is the portion of low virtual memory which should be protected
#include <linux/inet_diag.h>
#include <linux/xfrm.h>
#include <linux/audit.h>
+#include <linux/sock_diag.h>
#include "flask.h"
#include "av_permissions.h"
{
{ TCPDIAG_GETSOCK, NETLINK_TCPDIAG_SOCKET__NLMSG_READ },
{ DCCPDIAG_GETSOCK, NETLINK_TCPDIAG_SOCKET__NLMSG_READ },
+ { SOCK_DIAG_BY_FAMILY, NETLINK_TCPDIAG_SOCKET__NLMSG_READ },
};
static struct nlmsg_perm nlmsg_xfrm_perms[] =
struct context context;
int rc = 0;
+ /* An empty security context is never valid. */
+ if (!scontext_len)
+ return -EINVAL;
+
if (!ss_initialized) {
int i;
}
EXPORT_SYMBOL_GPL(snd_hda_bus_new);
-#ifdef CONFIG_SND_HDA_GENERIC
+#if IS_ENABLED(CONFIG_SND_HDA_GENERIC)
#define is_generic_config(codec) \
(codec->modelname && !strcmp(codec->modelname, "generic"))
#else
/*
* Dynamic symbol binding for the codec parsers
*/
-#ifdef MODULE
-#define load_parser_sym(sym) ((int (*)(struct hda_codec *))symbol_request(sym))
-#define unload_parser_addr(addr) symbol_put_addr(addr)
-#else
-#define load_parser_sym(sym) (sym)
-#define unload_parser_addr(addr) do {} while (0)
-#endif
#define load_parser(codec, sym) \
- ((codec)->parser = load_parser_sym(sym))
+ ((codec)->parser = (int (*)(struct hda_codec *))symbol_request(sym))
static void unload_parser(struct hda_codec *codec)
{
- if (codec->parser) {
- unload_parser_addr(codec->parser);
- codec->parser = NULL;
- }
+ if (codec->parser)
+ symbol_put_addr(codec->parser);
+ codec->parser = NULL;
}
/*
EXPORT_SYMBOL_GPL(snd_hda_codec_update_widgets);
-#ifdef CONFIG_SND_HDA_CODEC_HDMI
+#if IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI)
/* if all audio out widgets are digital, let's assume the codec as a HDMI/DP */
static bool is_likely_hdmi_codec(struct hda_codec *codec)
{
patch = codec->preset->patch;
if (!patch) {
unload_parser(codec); /* to be sure */
- if (is_likely_hdmi_codec(codec))
+ if (is_likely_hdmi_codec(codec)) {
+#if IS_MODULE(CONFIG_SND_HDA_CODEC_HDMI)
patch = load_parser(codec, snd_hda_parse_hdmi_codec);
-#ifdef CONFIG_SND_HDA_GENERIC
- if (!patch)
+#elif IS_BUILTIN(CONFIG_SND_HDA_CODEC_HDMI)
+ patch = snd_hda_parse_hdmi_codec;
+#endif
+ }
+ if (!patch) {
+#if IS_MODULE(CONFIG_SND_HDA_GENERIC)
patch = load_parser(codec, snd_hda_parse_generic_codec);
+#elif IS_BUILTIN(CONFIG_SND_HDA_GENERIC)
+ patch = snd_hda_parse_generic_codec;
#endif
+ }
if (!patch) {
printk(KERN_ERR "hda-codec: No codec parser is available\n");
return -ENODEV;
mutex_unlock(&codec->control_mutex);
snd_hda_codec_flush_cache(codec); /* flush the updates */
if (err >= 0 && spec->cap_sync_hook)
- spec->cap_sync_hook(codec, ucontrol);
+ spec->cap_sync_hook(codec, kcontrol, ucontrol);
return err;
}
return ret;
if (spec->cap_sync_hook)
- spec->cap_sync_hook(codec, ucontrol);
+ spec->cap_sync_hook(codec, kcontrol, ucontrol);
return ret;
}
return 0;
snd_hda_activate_path(codec, path, true, false);
if (spec->cap_sync_hook)
- spec->cap_sync_hook(codec, NULL);
+ spec->cap_sync_hook(codec, NULL, NULL);
path_power_down_sync(codec, old_path);
return 1;
}
}
if (spec->cap_sync_hook)
- spec->cap_sync_hook(codec, NULL);
+ spec->cap_sync_hook(codec, NULL, NULL);
}
/* set right pin controls for digital I/O */
void (*init_hook)(struct hda_codec *codec);
void (*automute_hook)(struct hda_codec *codec);
void (*cap_sync_hook)(struct hda_codec *codec,
+ struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
/* PCM hooks */
#endif
#if defined(CONFIG_PM) && defined(CONFIG_VGA_SWITCHEROO)
-#ifdef CONFIG_SND_HDA_CODEC_HDMI
+#if IS_ENABLED(CONFIG_SND_HDA_CODEC_HDMI)
#define SUPPORT_VGA_SWITCHEROO
#endif
#endif
}
}
+/* Toshiba Satellite L40 implements EAPD in a standard way unlike others */
+static void ad1986a_fixup_eapd(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ struct ad198x_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ codec->inv_eapd = 0;
+ spec->gen.keep_eapd_on = 1;
+ spec->eapd_nid = 0x1b;
+ }
+}
+
enum {
AD1986A_FIXUP_INV_JACK_DETECT,
AD1986A_FIXUP_ULTRA,
AD1986A_FIXUP_3STACK,
AD1986A_FIXUP_LAPTOP,
AD1986A_FIXUP_LAPTOP_IMIC,
+ AD1986A_FIXUP_EAPD,
};
static const struct hda_fixup ad1986a_fixups[] = {
.chained_before = 1,
.chain_id = AD1986A_FIXUP_LAPTOP,
},
+ [AD1986A_FIXUP_EAPD] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = ad1986a_fixup_eapd,
+ },
};
static const struct snd_pci_quirk ad1986a_fixup_tbl[] = {
SND_PCI_QUIRK_MASK(0x1043, 0xff00, 0x8100, "ASUS P5", AD1986A_FIXUP_3STACK),
SND_PCI_QUIRK_MASK(0x1043, 0xff00, 0x8200, "ASUS M2", AD1986A_FIXUP_3STACK),
SND_PCI_QUIRK(0x10de, 0xcb84, "ASUS A8N-VM", AD1986A_FIXUP_3STACK),
+ SND_PCI_QUIRK(0x1179, 0xff40, "Toshiba Satellite L40", AD1986A_FIXUP_EAPD),
SND_PCI_QUIRK(0x144d, 0xc01e, "FSC V2060", AD1986A_FIXUP_LAPTOP),
SND_PCI_QUIRK_MASK(0x144d, 0xff00, 0xc000, "Samsung", AD1986A_FIXUP_SAMSUNG),
SND_PCI_QUIRK(0x144d, 0xc027, "Samsung Q1", AD1986A_FIXUP_ULTRA),
static int patch_ad1983(struct hda_codec *codec)
{
struct ad198x_spec *spec;
+ static hda_nid_t conn_0c[] = { 0x08 };
+ static hda_nid_t conn_0d[] = { 0x09 };
int err;
err = alloc_ad_spec(codec);
return err;
spec = codec->spec;
+ spec->gen.mixer_nid = 0x0e;
spec->gen.beep_nid = 0x10;
set_beep_amp(spec, 0x10, 0, HDA_OUTPUT);
+
+ /* limit the loopback routes not to confuse the parser */
+ snd_hda_override_conn_list(codec, 0x0c, ARRAY_SIZE(conn_0c), conn_0c);
+ snd_hda_override_conn_list(codec, 0x0d, ARRAY_SIZE(conn_0d), conn_0d);
+
err = ad198x_parse_auto_config(codec, false);
if (err < 0)
goto error;
}
static void cxt_update_headset_mode_hook(struct hda_codec *codec,
- struct snd_ctl_elem_value *ucontrol)
+ struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
cxt_update_headset_mode(codec);
}
}
static void alc_inv_dmic_hook(struct hda_codec *codec,
- struct snd_ctl_elem_value *ucontrol)
+ struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
alc_inv_dmic_sync(codec, false);
}
ALC889_FIXUP_IMAC91_VREF,
ALC889_FIXUP_MBA11_VREF,
ALC889_FIXUP_MBA21_VREF,
+ ALC889_FIXUP_MP11_VREF,
ALC882_FIXUP_INV_DMIC,
ALC882_FIXUP_NO_PRIMARY_HP,
ALC887_FIXUP_ASUS_BASS,
.chained = true,
.chain_id = ALC889_FIXUP_MBP_VREF,
},
+ [ALC889_FIXUP_MP11_VREF] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc889_fixup_mba11_vref,
+ .chained = true,
+ .chain_id = ALC885_FIXUP_MACPRO_GPIO,
+ },
[ALC882_FIXUP_INV_DMIC] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc_fixup_inv_dmic_0x12,
SND_PCI_QUIRK(0x106b, 0x00a0, "MacBookPro 3,1", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x00a1, "Macbook", ALC889_FIXUP_MBP_VREF),
SND_PCI_QUIRK(0x106b, 0x00a4, "MacbookPro 4,1", ALC889_FIXUP_MBP_VREF),
- SND_PCI_QUIRK(0x106b, 0x0c00, "Mac Pro", ALC885_FIXUP_MACPRO_GPIO),
+ SND_PCI_QUIRK(0x106b, 0x0c00, "Mac Pro", ALC889_FIXUP_MP11_VREF),
SND_PCI_QUIRK(0x106b, 0x1000, "iMac 24", ALC885_FIXUP_MACPRO_GPIO),
SND_PCI_QUIRK(0x106b, 0x2800, "AppleTV", ALC885_FIXUP_MACPRO_GPIO),
SND_PCI_QUIRK(0x106b, 0x2c00, "MacbookPro rev3", ALC889_FIXUP_MBP_VREF),
/* turn on/off mic-mute LED per capture hook */
static void alc269_fixup_hp_gpio_mic_mute_hook(struct hda_codec *codec,
- struct snd_ctl_elem_value *ucontrol)
+ struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct alc_spec *spec = codec->spec;
unsigned int oldval = spec->gpio_led;
}
static void alc_update_headset_mode_hook(struct hda_codec *codec,
- struct snd_ctl_elem_value *ucontrol)
+ struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
alc_update_headset_mode(codec);
}
SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x1043, 0x8516, "ASUS X101CH", ALC269_FIXUP_ASUS_X101),
+ SND_PCI_QUIRK(0x104d, 0x90b5, "Sony VAIO Pro 11", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x104d, 0x90b6, "Sony VAIO Pro 13", ALC286_FIXUP_SONY_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIXUP_SONY_VAIO_GPIO2),
SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ),
SND_PCI_QUIRK(0x1025, 0x038b, "Acer Aspire 8943G", ALC662_FIXUP_ASPIRE),
SND_PCI_QUIRK(0x1028, 0x05d8, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x05db, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x060a, "Dell XPS 13", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0623, "Dell", ALC668_FIXUP_AUTO_MUTE),
SND_PCI_QUIRK(0x1028, 0x0624, "Dell", ALC668_FIXUP_AUTO_MUTE),
SND_PCI_QUIRK(0x1028, 0x0625, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
int default_polarity;
unsigned int mic_mute_led_gpio; /* capture mute LED GPIO */
- bool mic_mute_led_on; /* current mic mute state */
+ unsigned int mic_enabled; /* current mic mute state (bitmask) */
/* stream */
unsigned int stream_delay;
/* hook for controlling mic-mute LED GPIO */
static void stac_capture_led_hook(struct hda_codec *codec,
- struct snd_ctl_elem_value *ucontrol)
+ struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
{
struct sigmatel_spec *spec = codec->spec;
- bool mute;
+ unsigned int mask;
+ bool cur_mute, prev_mute;
- if (!ucontrol)
+ if (!kcontrol || !ucontrol)
return;
- mute = !(ucontrol->value.integer.value[0] ||
- ucontrol->value.integer.value[1]);
- if (spec->mic_mute_led_on != mute) {
- spec->mic_mute_led_on = mute;
- if (mute)
+ mask = 1U << snd_ctl_get_ioffidx(kcontrol, &ucontrol->id);
+ prev_mute = !spec->mic_enabled;
+ if (ucontrol->value.integer.value[0] ||
+ ucontrol->value.integer.value[1])
+ spec->mic_enabled |= mask;
+ else
+ spec->mic_enabled &= ~mask;
+ cur_mute = !spec->mic_enabled;
+ if (cur_mute != prev_mute) {
+ if (cur_mute)
spec->gpio_data |= spec->mic_mute_led_gpio;
else
spec->gpio_data &= ~spec->mic_mute_led_gpio;
if (spec->mic_mute_led_gpio) {
spec->gpio_mask |= spec->mic_mute_led_gpio;
spec->gpio_dir |= spec->mic_mute_led_gpio;
- spec->mic_mute_led_on = true;
+ spec->mic_enabled = 0;
spec->gpio_data |= spec->mic_mute_led_gpio;
spec->gen.cap_sync_hook = stac_capture_led_hook;
}
static void update_tpacpi_micmute_led(struct hda_codec *codec,
+ struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
if (!ucontrol || !led_set_func)
config SND_KIRKWOOD_SOC
tristate "SoC Audio for the Marvell Kirkwood and Dove chips"
- depends on ARCH_KIRKWOOD || ARCH_DOVE || COMPILE_TEST
+ depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_KIRKWOOD || COMPILE_TEST
help
Say Y or M if you want to add support for codecs attached to
the Kirkwood I2S interface. You will also need to select the
select SND_HWDEP
select SND_RAWMIDI
select SND_PCM
+ select BITREVERSE
help
Say Y here to include support for USB audio and USB MIDI
devices.
return 0;
}
+static bool same_kallsyms_reloc(const char *from_dir, char *to_dir)
+{
+ char from[PATH_MAX];
+ char to[PATH_MAX];
+ const char *name;
+ u64 addr1 = 0, addr2 = 0;
+ int i;
+
+ scnprintf(from, sizeof(from), "%s/kallsyms", from_dir);
+ scnprintf(to, sizeof(to), "%s/kallsyms", to_dir);
+
+ for (i = 0; (name = ref_reloc_sym_names[i]) != NULL; i++) {
+ addr1 = kallsyms__get_function_start(from, name);
+ if (addr1)
+ break;
+ }
+
+ if (name)
+ addr2 = kallsyms__get_function_start(to, name);
+
+ return addr1 == addr2;
+}
+
static int build_id_cache__kcore_existing(const char *from_dir, char *to_dir,
size_t to_dir_sz)
{
char from[PATH_MAX];
char to[PATH_MAX];
+ char to_subdir[PATH_MAX];
struct dirent *dent;
int ret = -1;
DIR *d;
continue;
scnprintf(to, sizeof(to), "%s/%s/modules", to_dir,
dent->d_name);
- if (!compare_proc_modules(from, to)) {
- scnprintf(to, sizeof(to), "%s/%s", to_dir,
- dent->d_name);
- strlcpy(to_dir, to, to_dir_sz);
+ scnprintf(to_subdir, sizeof(to_subdir), "%s/%s",
+ to_dir, dent->d_name);
+ if (!compare_proc_modules(from, to) &&
+ same_kallsyms_reloc(from_dir, to_subdir)) {
+ strlcpy(to_dir, to_subdir, to_dir_sz);
ret = 0;
break;
}
* have no _text sometimes.
*/
err = perf_event__synthesize_kernel_mmap(tool, process_synthesized_event,
- machine, "_text");
- if (err < 0)
- err = perf_event__synthesize_kernel_mmap(tool, process_synthesized_event,
- machine, "_stext");
+ machine);
if (err < 0)
pr_err("Couldn't record guest kernel [%d]'s reference"
" relocation symbol.\n", machine->pid);
}
err = perf_event__synthesize_kernel_mmap(tool, process_synthesized_event,
- machine, "_text");
- if (err < 0)
- err = perf_event__synthesize_kernel_mmap(tool, process_synthesized_event,
- machine, "_stext");
+ machine);
if (err < 0)
pr_err("Couldn't record kernel reference relocation symbol\n"
"Symbol resolution may be skewed if relocation was used (e.g. kexec).\n"
will need at least this:
- asm/perf_event.h - a basic stub will suffice at first
- support for atomic64 types (and associated helper functions)
- - set_perf_event_pending() implemented
If your architecture does have hardware capabilities, you can override the
weak stub hw_perf_event_init() to register hardware counters.
#ifdef __aarch64__
#define mb() asm volatile("dmb ish" ::: "memory")
-#define wmb() asm volatile("dmb ishld" ::: "memory")
-#define rmb() asm volatile("dmb ishst" ::: "memory")
+#define wmb() asm volatile("dmb ishst" ::: "memory")
+#define rmb() asm volatile("dmb ishld" ::: "memory")
#define cpu_relax() asm volatile("yield" ::: "memory")
#endif
struct map *kallsyms_map, *vmlinux_map;
struct machine kallsyms, vmlinux;
enum map_type type = MAP__FUNCTION;
- struct ref_reloc_sym ref_reloc_sym = { .name = "_stext", };
u64 mem_start, mem_end;
/*
*/
kallsyms_map = machine__kernel_map(&kallsyms, type);
- sym = map__find_symbol_by_name(kallsyms_map, ref_reloc_sym.name, NULL);
- if (sym == NULL) {
- pr_debug("dso__find_symbol_by_name ");
- goto out;
- }
-
- ref_reloc_sym.addr = UM(sym->start);
-
/*
* Step 5:
*
}
vmlinux_map = machine__kernel_map(&vmlinux, type);
- map__kmap(vmlinux_map)->ref_reloc_sym = &ref_reloc_sym;
/*
* Step 6:
return 1;
}
+u64 kallsyms__get_function_start(const char *kallsyms_filename,
+ const char *symbol_name)
+{
+ struct process_symbol_args args = { .name = symbol_name, };
+
+ if (kallsyms__parse(kallsyms_filename, &args, find_symbol_cb) <= 0)
+ return 0;
+
+ return args.start;
+}
+
int perf_event__synthesize_kernel_mmap(struct perf_tool *tool,
perf_event__handler_t process,
- struct machine *machine,
- const char *symbol_name)
+ struct machine *machine)
{
size_t size;
- const char *filename, *mmap_name;
- char path[PATH_MAX];
+ const char *mmap_name;
char name_buff[PATH_MAX];
struct map *map;
+ struct kmap *kmap;
int err;
/*
* We should get this from /sys/kernel/sections/.text, but till that is
* available use this, and after it is use this as a fallback for older
* kernels.
*/
- struct process_symbol_args args = { .name = symbol_name, };
union perf_event *event = zalloc((sizeof(event->mmap) +
machine->id_hdr_size));
if (event == NULL) {
* see kernel/perf_event.c __perf_event_mmap
*/
event->header.misc = PERF_RECORD_MISC_KERNEL;
- filename = "/proc/kallsyms";
} else {
event->header.misc = PERF_RECORD_MISC_GUEST_KERNEL;
- if (machine__is_default_guest(machine))
- filename = (char *) symbol_conf.default_guest_kallsyms;
- else {
- sprintf(path, "%s/proc/kallsyms", machine->root_dir);
- filename = path;
- }
- }
-
- if (kallsyms__parse(filename, &args, find_symbol_cb) <= 0) {
- free(event);
- return -ENOENT;
}
map = machine->vmlinux_maps[MAP__FUNCTION];
+ kmap = map__kmap(map);
size = snprintf(event->mmap.filename, sizeof(event->mmap.filename),
- "%s%s", mmap_name, symbol_name) + 1;
+ "%s%s", mmap_name, kmap->ref_reloc_sym->name) + 1;
size = PERF_ALIGN(size, sizeof(u64));
event->mmap.header.type = PERF_RECORD_MMAP;
event->mmap.header.size = (sizeof(event->mmap) -
(sizeof(event->mmap.filename) - size) + machine->id_hdr_size);
- event->mmap.pgoff = args.start;
+ event->mmap.pgoff = kmap->ref_reloc_sym->addr;
event->mmap.start = map->start;
event->mmap.len = map->end - event->mmap.start;
event->mmap.pid = machine->pid;
struct machine *machine, bool mmap_data);
int perf_event__synthesize_kernel_mmap(struct perf_tool *tool,
perf_event__handler_t process,
- struct machine *machine,
- const char *symbol_name);
+ struct machine *machine);
int perf_event__synthesize_modules(struct perf_tool *tool,
perf_event__handler_t process,
size_t perf_event__fprintf_task(union perf_event *event, FILE *fp);
size_t perf_event__fprintf(union perf_event *event, FILE *fp);
+u64 kallsyms__get_function_start(const char *kallsyms_filename,
+ const char *symbol_name);
+
#endif /* __PERF_RECORD_H */
--- /dev/null
+#ifndef __ASM_GENERIC_HASH_H
+#define __ASM_GENERIC_HASH_H
+
+/* Stub */
+
+#endif /* __ASM_GENERIC_HASH_H */
return 1;
}
+static void machine__get_kallsyms_filename(struct machine *machine, char *buf,
+ size_t bufsz)
+{
+ if (machine__is_default_guest(machine))
+ scnprintf(buf, bufsz, "%s", symbol_conf.default_guest_kallsyms);
+ else
+ scnprintf(buf, bufsz, "%s/proc/kallsyms", machine->root_dir);
+}
+
/* Figure out the start address of kernel map from /proc/kallsyms */
static u64 machine__get_kernel_start_addr(struct machine *machine)
{
- const char *filename;
- char path[PATH_MAX];
+ char filename[PATH_MAX];
struct process_args args;
- if (machine__is_default_guest(machine))
- filename = (char *)symbol_conf.default_guest_kallsyms;
- else {
- sprintf(path, "%s/proc/kallsyms", machine->root_dir);
- filename = path;
- }
+ machine__get_kallsyms_filename(machine, filename, PATH_MAX);
if (symbol__restricted_filename(filename, "/proc/kallsyms"))
return 0;
return 0;
}
+const char *ref_reloc_sym_names[] = {"_text", "_stext", NULL};
+
int machine__create_kernel_maps(struct machine *machine)
{
struct dso *kernel = machine__get_kernel(machine);
+ char filename[PATH_MAX];
+ const char *name;
+ u64 addr = 0;
+ int i;
+
+ machine__get_kallsyms_filename(machine, filename, PATH_MAX);
+
+ for (i = 0; (name = ref_reloc_sym_names[i]) != NULL; i++) {
+ addr = kallsyms__get_function_start(filename, name);
+ if (addr)
+ break;
+ }
+ if (!addr)
+ return -1;
if (kernel == NULL ||
__machine__create_kernel_maps(machine, kernel) < 0)
* Now that we have all the maps created, just set the ->end of them:
*/
map_groups__fixup_end(&machine->kmaps);
+
+ if (maps__set_kallsyms_ref_reloc_sym(machine->vmlinux_maps, name,
+ addr)) {
+ machine__destroy_kernel_maps(machine);
+ return -1;
+ }
+
return 0;
}
#define HOST_KERNEL_ID (-1)
#define DEFAULT_GUEST_KERNEL_ID (0)
+extern const char *ref_reloc_sym_names[];
+
struct machine {
struct rb_node rb_node;
pid_t pid;
map->start = start;
map->end = end;
map->pgoff = pgoff;
+ map->reloc = 0;
map->dso = dso;
map->map_ip = map__map_ip;
map->unmap_ip = map__unmap_ip;
if (map->dso->rel)
return rip - map->pgoff;
- return map->unmap_ip(map, rip);
+ return map->unmap_ip(map, rip) - map->reloc;
}
/**
if (map->dso->rel)
return map->unmap_ip(map, ip + map->pgoff);
- return ip;
+ return ip + map->reloc;
}
void map_groups__init(struct map_groups *mg)
bool erange_warned;
u32 priv;
u64 pgoff;
+ u64 reloc;
u32 maj, min; /* only valid for MMAP2 record */
u64 ino; /* only valid for MMAP2 record */
u64 ino_generation;/* only valid for MMAP2 record */
if (strcmp(elf_name, kmap->ref_reloc_sym->name))
continue;
kmap->ref_reloc_sym->unrelocated_addr = sym.st_value;
+ map->reloc = kmap->ref_reloc_sym->addr -
+ kmap->ref_reloc_sym->unrelocated_addr;
break;
}
}
(u64)shdr.sh_offset);
sym.st_value -= shdr.sh_addr - shdr.sh_offset;
}
+new_symbol:
/*
* We need to figure out if the object was created from C++ sources
* DWARF DW_compile_unit has this, but we don't always have access
if (demangled != NULL)
elf_name = demangled;
}
-new_symbol:
f = symbol__new(sym.st_value, sym.st_size,
GELF_ST_BIND(sym.st_info), elf_name);
free(demangled);
* kernel range is broken in several maps, named [kernel].N, as we don't have
* the original ELF section names vmlinux have.
*/
-static int dso__split_kallsyms(struct dso *dso, struct map *map,
+static int dso__split_kallsyms(struct dso *dso, struct map *map, u64 delta,
symbol_filter_t filter)
{
struct map_groups *kmaps = map__kmap(map)->kmaps;
char dso_name[PATH_MAX];
struct dso *ndso;
+ if (delta) {
+ /* Kernel was relocated at boot time */
+ pos->start -= delta;
+ pos->end -= delta;
+ }
+
if (count == 0) {
curr_map = map;
goto filter_symbol;
curr_map->map_ip = curr_map->unmap_ip = identity__map_ip;
map_groups__insert(kmaps, curr_map);
++kernel_range;
+ } else if (delta) {
+ /* Kernel was relocated at boot time */
+ pos->start -= delta;
+ pos->end -= delta;
}
filter_symbol:
if (filter && filter(curr_map, pos)) {
return 0;
}
+static int validate_kcore_addresses(const char *kallsyms_filename,
+ struct map *map)
+{
+ struct kmap *kmap = map__kmap(map);
+
+ if (kmap->ref_reloc_sym && kmap->ref_reloc_sym->name) {
+ u64 start;
+
+ start = kallsyms__get_function_start(kallsyms_filename,
+ kmap->ref_reloc_sym->name);
+ if (start != kmap->ref_reloc_sym->addr)
+ return -EINVAL;
+ }
+
+ return validate_kcore_modules(kallsyms_filename, map);
+}
+
struct kcore_mapfn_data {
struct dso *dso;
enum map_type type;
kallsyms_filename))
return -EINVAL;
- /* All modules must be present at their original addresses */
- if (validate_kcore_modules(kallsyms_filename, map))
+ /* Modules and kernel must be present at their original addresses */
+ if (validate_kcore_addresses(kallsyms_filename, map))
return -EINVAL;
md.dso = dso;
return -EINVAL;
}
+/*
+ * If the kernel is relocated at boot time, kallsyms won't match. Compute the
+ * delta based on the relocation reference symbol.
+ */
+static int kallsyms__delta(struct map *map, const char *filename, u64 *delta)
+{
+ struct kmap *kmap = map__kmap(map);
+ u64 addr;
+
+ if (!kmap->ref_reloc_sym || !kmap->ref_reloc_sym->name)
+ return 0;
+
+ addr = kallsyms__get_function_start(filename,
+ kmap->ref_reloc_sym->name);
+ if (!addr)
+ return -1;
+
+ *delta = addr - kmap->ref_reloc_sym->addr;
+ return 0;
+}
+
int dso__load_kallsyms(struct dso *dso, const char *filename,
struct map *map, symbol_filter_t filter)
{
+ u64 delta = 0;
+
if (symbol__restricted_filename(filename, "/proc/kallsyms"))
return -1;
if (dso__load_all_kallsyms(dso, filename, map) < 0)
return -1;
+ if (kallsyms__delta(map, filename, &delta))
+ return -1;
+
symbols__fixup_duplicate(&dso->symbols[map->type]);
symbols__fixup_end(&dso->symbols[map->type]);
if (!dso__load_kcore(dso, map, filename))
return dso__split_kallsyms_for_kcore(dso, map, filter);
else
- return dso__split_kallsyms(dso, map, filter);
+ return dso__split_kallsyms(dso, map, delta, filter);
}
static int dso__load_perf_map(struct dso *dso, struct map *map,
continue;
scnprintf(kallsyms_filename, sizeof(kallsyms_filename),
"%s/%s/kallsyms", dir, dent->d_name);
- if (!validate_kcore_modules(kallsyms_filename, map)) {
+ if (!validate_kcore_addresses(kallsyms_filename, map)) {
strlcpy(dir, kallsyms_filename, dir_sz);
ret = 0;
break;
if (fd != -1) {
close(fd);
/* If module maps match go with /proc/kallsyms */
- if (!validate_kcore_modules("/proc/kallsyms", map))
+ if (!validate_kcore_addresses("/proc/kallsyms", map))
goto proc_kallsyms;
}
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
+#include <linux/uaccess.h>
#include <linux/irqchip/arm-gic.h>
list_add_tail(&dev->list, &kvm->coalesced_zones);
mutex_unlock(&kvm->slots_lock);
- return ret;
+ return 0;
out_free_dev:
mutex_unlock(&kvm->slots_lock);
-
kfree(dev);
- if (dev == NULL)
- return -ENXIO;
-
- return 0;
+ return ret;
}
int kvm_vm_ioctl_unregister_coalesced_mmio(struct kvm *kvm,
projects / cascardo / linux.git / commitdiff